TY - THES A1 - Bauer, Christian T1 - Towards ecological and efficient electrochemical energy storage in supercapacitors and sodium ion batteries using onion-like carbon T1 - Ökologische und effiziente elektrochemische Energiespeicherung in Superkondensatoren und Natriumionen-Batterien mit Kohlenstoff-Nanozwiebeln N2 - In this thesis, the usage of onion-like carbon (OLC) for energy storage applications was researched regarding sustainability, performance and processability. This work targets to increase the scientific understanding regarding the role of OLC in electrodes and to facilitate a large-scale production, which is the foundation for commercial application. Research was devoted to increase the knowledge in the particular field, to yield synergistic approaches and a shared value regarding sustainability and performance. N2 - Im Rahmen dieser Arbeit wurde die Verwendung von Onion-like Carbon (OLC) als Aktivmaterial zur Energiespeicherung untersucht. Die Arbeit zielte darauf ab, das wissenschaftliche Verständnis der Rolle von OLC im Kontext der elektrochemischen Energiespeicherung zu verbessern. Hierfür wurde an den Prozessschritten und Verfahren gearbeitet, um OLC-basierte Elektroden erfolgreich in Superkondensatoren und Pseudokondensatoren zu verwenden. Auch der Einsatz von OLC als Aktivmaterial für Natriumionenbatterien wurde erforscht, wobei sich das Material in dieser Anwendung als Aktivmaterial ungeeignet erwies. Die Bearbeitungen dieser Fragestellungen war darauf ausgerichtet, das Wissen in diesem Bereich zu erweitern, synergetische Ansätze für Problemlösungen zu finden und einen Mehrwert in Bezug auf Nachhaltigkeit, Performance und Prozessierbarkeit zu schaffen. KW - Elektrochemie KW - Chemie KW - Anode KW - Kohlenstoff KW - Superkondensator KW - OLC KW - SIB KW - PEDOT KW - Supercap Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-317956 ER - TY - THES A1 - Wiener, Matthias T1 - Synthese und Charakterisierung Sol-Gel-basierter Kohlenstoff-Materialien für die Hochtemperatur-Wärmedämmung T1 - Synthesis and Characterisation Sol-Gel-based Carbon-Materials for High Temperature Thermal Insulation N2 - Gegenstand der vorliegenden Arbeit ist die Synthese, Charakterisierung und Optimierung von Kohlenstoff-Aerogelen (C-Aerogele) für den Einsatz als Hochtemperaturwärmedämmung (> 1000°C). C-Aerogele sind offenporöse monolithische Festkörper, die durch Pyrolyse von organischen Aerogelen entstehen. Die Synthese dieser organischen Vorstufen erfolgt über das Sol-Gel-Verfahren. Zur Charakterisierung der Morphologie wurde die innere Struktur der Aerogele mittels Raster- und Transmissionselektronenmikroskopie, Röntgendiffraktometrie (XRD), Raman-Spektroskopie, Stickstoffsorption und Röntgenkleinwinkelstreuung (SAXS) untersucht. Die thermischen Eigenschaften der Aerogele wurden mit Hilfe von Laser-Flash Messungen, dynamischer Differenzkalorimetrie (DSC), thermographischen und infrarot-optischen (IR) Messungen quantifiziert. Die innere Struktur von Aerogelen besteht aus einem dreidimensionalen Gerüst von Primärpartikeln, die während der Sol-Gel Synthese ohne jede Ordnung aneinander wachsen. Die zwischen den Partikeln befindlichen Hohlräume bilden die Poren. Die mittlere Partikel- und Porengröße eines Aerogels kann durch die Konzentration der Ausgangslösung und der Katalysatorkonzentration einerseits und durch die Synthesetemperatur und –dauer andererseits eingestellt werden. Der Bereich der mittleren Partikel- und Porengröße, der in dieser Arbeit synthetisierten Aerogele, erstreckt sich von einigen 10 Nanometern bis zu einigen Mikrometern. Die Dichten der Proben wurden im Bereich von 225 kg/m3 bis 635 kg/m3 variiert. Die Auswirkungen der Pyrolysetemperatur auf die Struktur und die thermischen Eigenschaften der C-Aerogele wurden anhand einer Probenserie erstmalig systematisch untersucht. Die Proben wurden dazu bei Temperaturen von 800°C bis 2500°C pyrolysiert bzw. temperaturbehandelt (geglüht). Um die einzelnen Beiträge zur Wärmeleitfähigkeit trennen und minimieren zu können, wurden die synthetisierten Aerogele thermisch mit mehreren Meßmethoden unter unterschiedlichen Bedingungen charakterisiert. Temperaturabhängige Messungen der spezifischen Wärmekapazität cp im Bereich von 32°C bis 1500°C ergaben für C-Aerogele verglichen mit den Literaturdaten von Graphit einen ähnlichen Verlauf. Allerdings steigt cp etwas schneller mit der Temperatur an, was auf eine „weichere“ Struktur hindeutet. Die maximale Abweichung beträgt etwa 11%. Messungen an einer Serie morphologisch identischer Aerogelproben, die im Temperaturbereich zwischen 800°C und 2500°C pyrolysiert bzw. geglüht wurden, ergeben eine Zunahme der Festkörperwärmeleitfähigkeit mit der Behandlungstemperatur um etwa einen Faktor 8. Stickstoffsorptions-, XRD-, Raman- und SAXS-Messungen an diesen Proben zeigen, dass dieser Effekt wesentlich durch das Wachstum der graphitischen Bereiche (Mikrokristallite) innerhalb der Primärpartikel des Aerogels bestimmt wird. Berechnungen auf Basis von Messungen der Temperaturleitfähigkeit weisen außerdem auch auf Veränderungen der Mikrokristallite hin. Gasdruckabhängige Messungen der Wärmeleitfähigkeit und der Vergleich zwischen Messungen unter Vakuum und unter Normaldruck an verschiedenen Aerogelmorphologien liefern Aussagen über den Gasanteil der Wärmeleitfähigkeit. Dabei zeigt sich, dass sich der Gasanteil der Wärmeleitfähigkeit in den Poren des Aerogels verglichen mit dem freien Gas durch die geeignete mittlere Porengröße erwartungsgemäß erheblich verringern lässt. Diese Ergebnisse stimmen in Rahmen der Messunsicherheit mit der Theorie überein. Durch infrarot-optische Messungen an C-Aerogelen konnte der Extinktionskoeffizient bestimmt und daraus der entsprechende Beitrag der Wärmestrahlung zur Wärmeleitfähigkeit berechnet werden. Temperaturabhängige Messungen der thermischen Diffusivität erlaubten mit der zur Verfügung stehenden Laser-Flash Apparatur die Bestimmung der Wärmeleitfähigkeit bis zu Temperaturen von 1500°C. Die Temperaturabhängigkeit der Wärmeleitfähigkeit der C-Aerogele zeigt eine Charakteristik, die mit den separat gemessenen bzw. berechneten Beiträgen zur Wärmeleitfähigkeit und der Theorie im Rahmen der Messunsicherheit gut übereinstimmen. Auf der Basis der gewonnenen Messdaten ist es möglich, die Wärmeleitfähigkeit von Aerogelen für Anwendungen über die maximale Messtemperatur von 1500°C durch Extrapolation vorherzusagen. Die niedrigste Wärmeleitfähigkeit der im Rahmen dieser Arbeit synthetisierten C-Aerogele beträgt danach etwa 0,17 W/(m•K) bei 2500°C unter Argonatmosphäre. Kommerziell erhältliche Hochtemperatur-Wärmedämmstoffe, wie z. B. Kohlefaserfilze oder Kohlenstoffschäume weisen Wärmeleitfähigkeiten im Bereich von etwa 0,7 bis 0,9 W/(m•K) bei einer Temperatur von 2000°C auf. Die Messungen zeigen, dass die vergleichsweise niedrigen Wärmeleitfähigkeiten von C-Aerogelen bei hohen Temperaturen durch die Unterdrückung des Gas- und Strahlungsbeitrags der Wärmeleitfähigkeit bedingt sind. N2 - The scope of the present work is the synthesis, the characterisation and the optimisation of carbon (c-) aerogels as high temperature insulation (> 1000°C). Carbon aerogels are open porous monolithic solids which are produced by pyrolysis of organic aerogels. These organic precursors are synthesized via the sol-gel route. For the structural characterisation of the aerogels the samples were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD), Raman spectroscopy, nitrogen sorption measurements and small angle X-ray scattering (SAXS). The thermal properties of the aerogels were quantified by laser flash measurements, differential scanning calorimetry (DSC), thermographic and infrared optical measurements. The inner structure of the aerogels consists of a three dimensional skeleton of primary particles which grow during the sol-gel synthesis and are connected to each other without any orientation. The voids between the particles are the pores. The mean particle and pore size of the aerogel can be tailored specifically via the concentration of the catalyst and the degree of dilution of the educt solution on the one hand and the synthesis time and -temperature on the other hand. The range of the mean particle and pore sizes of the aerogels synthesized within this work extends from some tens of nanometers to some microns. The density of the samples was varied in the range from 225 kg/m3 to 635 kg/m3. The impact of pyrolysis and annealing temperature on the morphology and the thermal properties of carbon aerogels was investigated for the first time systematically on one series of samples. For that purpose the samples were pyrolysed and annealed in the range of 800 to 2500°C. To separate and minimize the individual contributions, the thermal conductivity of the synthesized c-aerogels were thermally characterized by different measuring methods under various conditions. The measurements of the specific heat in the range of 32 to 1500°C yield values similar to the literature data of graphite; however slightly systematic higher values of up to 11% were observed as expected for “softer” solids with high interfacial surface areas. Measurements of a series of carbon aerogels with identical morphology, however different annealing temperatures, show an increase of the solid thermal conductivity with increasing annealing temperature of up to a factor of about 8 for temperatures between 800°C and 2500°C. Nitrogen sorption-, XRD-, Raman-, and SAXS-measurements reveal that this effect is dominated by the growth of graphitic domains (microcrystallites) within the primary particles of the aerogel. In addition calculations based on measurements of the thermal diffusivity indicate changes of the microcrystallites. Measurements of the thermal conductivity of aerogels with different morphologies as a function of gas pressure and the comparison of the data taken under vacuum and normal pressure yield informations about the gaseous contribution to the thermal conductivity. As expected, the gaseous thermal conductivity within the pores of the aerogel can be reduced compared to the free gas when the pore size is in the range of the mean free path of the gas molecules or smaller. The results agree with the theory within the measuremental uncertainties. Infrared optical measurements provide the extinction coefficient of carbon aerogels, from which the radiative contribution to the thermal conductivity could be determined. The laser flash equipment available at the ZAE Bayern allows measurements of the thermal diffusivity up to 1500°C from which the thermal conductivity can be determined. The thermal conductivity of carbon aerogels as a function of temperature is well described by a superposition of the single contributions determined separately and the theoretical predictions within the uncertainties. Based on the experimental data it is possible to extrapolate the thermal conductivity of carbon aerogels for applications beyond the maximum temperature investigated (1500°C). Thus the lowest thermal conductivity of the carbon aerogels synthesized in the scope of this work is about 0,17 W/(m•K) at 2500°C in argon atmosphere. This value is about a factor 4 lower than for the best commercially available insulation material. KW - Hochtemperatur KW - Aerogel KW - Hochtemperatur KW - Kohlenstoff KW - Wärmeisolierstoff KW - Sol-Gel-Verfahren KW - Bayerisches Zentrum für Angewandte Energieforschung / Abteilung Wärmedämmung und Wärmetransport KW - thermal insulation KW - carbon KW - aerogel KW - high temperature KW - nano Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-44245 ER - TY - THES A1 - Handmann, Vera Iris T1 - Studien zur C/Si-Bioisosterie T1 - Studies on C/Si Bioisosterism N2 - Im Rahmen der vorliegenden Arbeit wurden Beiträge zur C/Si-Bioisosterie und zur asymmetrischen Synthese neuer siliciumhaltiger alpha-Aminosäuren geleistet. Im Vordergrund der Untersuchungen stand die Entwicklung neuer präparativer Methoden zur Darstellung siliciumhaltiger Wirkstoffe und die Untersuchung ihrer pharmakologischen Wirksamkeit sowie die Synthese racemischer und enantiomerenreiner siliciumhaltiger alpha-Aminosäuren des beta-(Trimethylsilyl)alanin-Typs. N2 - This work describes contributions to the field of C/Si bioisosterism and to the asymmetric synthesis of novel silicon-containing alpha-amino acids. The aim of these investigations was the development of new preparative methods for the synthesis of silicon-containing drugs and their pharmacological evaluation as well as the synthesis of racemic and enantiomerically pure silicon-containing alpha-amino acids of the beta-(trimethylsilyl)alanine type. KW - Kohlenstoff KW - Silicium KW - Bioisosterie KW - Muscarin KW - Antagonist KW - Aminosäurederivate KW - Aminosäuren KW - Antipsychotika KW - Bioanorganik KW - Kristallstrukturanalyse KW - Muscarin Antagonisten KW - pharmakologisches Profil KW - Silicium KW - Synthese KW - amino acids KW - antipsychotics KW - bioinorganic chemistry KW - C/Si bioisosterism KW - crystal structure analysis KW - muscarinic antagonists Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4719 ER - TY - THES A1 - Brandt, Rainer T1 - Sauer katalysierte, unterkritisch getrocknete Resorcin-Formaldehyd-Aerogele und daraus abgeleitete Kohlenstoff-Aerogele T1 - Carbon aerogels derived from acid-catalyzed and subcritcally dried resorcinol-formaldehyde aerogels N2 - Resorcin-Formaldehyd (RF) Aerogele sind feinstporöse organische Stoffe, die über einen katalysierten Sol-Gel-Prozeß und anschließende Trocknung gewonnen werden. In ihrem chemischen Aufbau sind sie den Phenoplasten oder Phenolharzen sehr ähnlich. Durch Erhitzung auf über 900 K unter Schutzgas lassen sich die organischen Aerogele in elektrisch leitfähige Kohlenstoff (C) Aerogele umwandeln. Durch die Menge der wäßrigen Verdünnung, sowie die Art und Konzentration des eingesetzten Katalysators, läßt sich die Poren- und Partikelgröße sowie die Porosität des im Sol-Gel-Prozeß entstehenden Gels beeinflussen. Aufgrund dieser Möglichkeit, die Eigenschaften der RF- und C-Aerogele „maßzuschneidern”, bieten sich Einsatz- und Optimierungsmöglichkeiten bei zahlreichen technischen Anwendungen: z.B. bei Isolationsmaterialien, bei der Gaswäsche und in der Elektrochemie als Elektrodenmaterial für Batterien und Kondensatoren, sowie zur Elektrolyse. Bisherige systematische Untersuchungen unter Variation der Katalysator- und Monomerkonzentration beschränkten sich zumeist auf mit Na2CO3 basisch katalysierte RF- und C-Aerogele. Um metallische Verunreinigungen zu vermeiden, die sich beispielsweise beim Einsatz von C-Aerogelen als Substrat für Halbleiter störend auswirken, wurde in der vorliegenden Arbeit die Wirkung von carbonsauren Katalysatoren, insbesondere Essigsäure und vereinzelt auch Ameisensäure, auf die Strukturen und Eigenschaften der entstehenden Aerogele systematisch untersucht. Da im Hinblick auf spätere Anwendungen stets eine vereinfachte unterkritische Trocknung mit Austausch des Porenwassers durch Aceton durchgeführt wurde, wurde zum Vergleich auch eine entsprechend getrocknete Probenserie Na2CO3-katalysierter RF- und C-Aerogele hergestellt und untersucht. Strukturelle Untersuchungen mittels REM, Röntgenkleinwinkelstreuung (SAXS) und Gassorptionsmessungen ergaben ähnlich wie bei basisch katalysierten Aerogelen eine Abnahme des Primärpartikeldurchmessers mit steigendem Katalysatorgehalt und bestätigten damit die Wirksamkeit der protoneninduzierten Katalyse, welche ab etwa pH = 5 einsetzen sollte. Allerdings zeigte sich, daß der essigsaure Katalysator weniger wirksam ist als Na2CO3, so daß zur Herstellung sehr fein strukturierter Aerogele mit geringen Dichten und Strukturen im nm-Bereich extrem hohe Katalysatorkonzentrationen bis in die Größenordnung der Stoffmenge des wässrigen Lösungsmittels nötig sind. Wie auch bei basischer Katalyse mit geringer Katalysatorkonzentration, ergaben Variationen der Monomerkonzentration bei den essigsauer katalysierten Proben eine Poren- und Partikelverkleinerung mit zunehmendem Monomergehalt, jedoch mit größerer Verteilungsbreite als bei der basischen Katalyse. Bei der Na2CO3-Katalyse mit hohen Katalysatorkonzentrationen und bei unterkritischer Trocknung, kompensierte die mit sinkender Monomerkonzentration stark ansteigende trocknungsbedingte Schrumpfung die zu erwartende Porositätszunahme, so daß sich bei einheitlicher Katalysator- und verschiedenen Monomerkonzentrationen kaum strukturelle und Dichteänderungen einstellten. Die schwach essigsauer katalysierten Proben zeigten im Vergleich zu den basischen eine stark veränderte Morphologie. Während bei letzteren die Kontaktstellen zwischen den Primärpartikeln mit steigendem Partikeldurchmesser immer spärlicher ausfallen, gibt es bei carbonsauer katalysierten RF- und C-Aerogelen auch bei Primärpartikeln im µm-Bereich ein ausgeprägtes Halswachstum. Weiterhin haben die µm-großen Primärpartikel basisch katalysierter RF-Aerogele ein clusterartiges Erscheinungsbild, während man bei essigsauer katalysierten kugelrunde Primärpartikel findet. Zur Untersuchung des Gelierprozesses wurden einige Proben mit veränderten Gelierzeiten und –temperaturen hergestellt. So konnte festgestellt werden, daß die Verweildauer bei Zimmertemperatur im Zusammenhang mit dem Primärpartikelwachstum steht, während bei höheren Temperaturen die Vernetzung der Primärpartikeln untereinander gefördert wird. Zu kurze Gelierzeiten und ein Verzicht auf höhere Temperaturen führt zu einer sehr starken Schrumpfung bei der unterkritischen Trocknung und damit zu nahezu unporösen harzartigen Materialien. N2 - Resorcinol-formaldehyde (RF) aerogels are highly porous materials obtained via an acidic or basic catalyzed sol-gel-process followed by a drying step. Concerning their chemistry, RF-aerogels are similarly constructed as phenolic resins. The organic RF-aerogels allow for conversion into electrically conductive carbon (C) aerogels by heating them up to at least 900K under inert conditions (pyrolysis). The size of the pores and particles as well as the porosity of the developing gel is controlled by the amount of the aqueous dilution as well as the type and the concentration of the used catalyst. The ability to ”tailor” the properties of the RF- and C-Aerogels allows for improvements in numerous technical applications, such as in thermal insulating, filtration and in the field of electrochemistry, where porous carbons act as electrode material in batteries and capacitors, as well as for electrochemical analysis purposes. In contrast to acidic catalysis, the effect of dilution and catalyst concentration on the structural properties of the resulting aerogels are well studied for the commonly used basic catalysis with sodium carbonate. Since metallic impurities are disadvantageous in several technical applications, for example in substrate materials for semiconductor technology, the influence of carbonic acids, especially acetic acid and in some cases formic acid, on the structures and properties of the developing gels was systematically investigated. In view of later applications, a simplified subcritically drying following the exchange of the pore water for acetone was carried out. As a reference a similarly dried series of Na2CO3-catalyzed RF- and C-aerogels was prepared and examined. As for basic catalyzed aerogels, structural investigations via SEM and small angle X-ray scattering (SAXS) show the reduction of the particle diameter with increasing catalyst concentration and confirm the effectiveness of the H3O+-catalysis, which should start at a pH-value of about 5. However, the acidic catalyst is less effective with respect to Na2CO3, so that huge amounts of catalyst are required to obtain acetic acid catalyzed aerogels with a nanometer sized structure and low densities. Alike in basic catalysis with small catalyst concentrations, the pore and particle sizes decrease with increasing monomer concentration. However, the evaluation of the SAXS-measurements suggests a broader pore and particle size distribution for the acidic catalyzed aerogels. In Na2CO3-catalysis with large catalyst concentrations, the expected increase of porosity with decreasing monomer concentration was found to be compensated by an increasing shrinkage due to capillary stresses upon subcritical drying. Consequently, different monomer concentrations led to similar structures and densities if the same catalyst concentration was used. The morphology of the micron structured basic and acidic catalyzed aerogels is different. In case of basic catalysis the transitions between the primary particles become more and more sparse with increasing particle size and the particles have a cluster-like appearance. In contrast, the carbonic acid catalyzed aerogels have thick ”necks” and the particles look like perfect spheres. To investigate the gelation process some gels were prepared at different aging times and temperatures. The results revealed, that the time at room temperature is connected with the growth of the primary particles, whereas the connectivity of the primary particles increases with increasing gelation temperature. A short gelation time and a gelation without higher temperatures leads to a very large shrinkage in the following subcritical drying step. Thus almost non-porous and resin-like samples are derived. KW - Aerogel KW - Resorcin KW - Formaldehyd KW - Pyrolyse KW - Kohlenstoff KW - Aerogele KW - Sol-Gel-Prozess KW - Sorption KW - (U)SAXS KW - Pyrolyse KW - aerogels KW - sol-gel process KW - sorption KW - (U)SAXS KW - pyrolysis Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15795 ER - TY - THES A1 - Shityakov, Sergey T1 - Molecular modelling and simulation of retroviral proteins and nanobiocomposites T1 - Simulationen und Interaktionen viraler Proteine sowie von Kohlenstoffenanoröhren mit Membranen und Proteinen N2 - Molecular modelling and simulation are powerful methods in providing important in-formation on different biological systems to elucidate their structural and functional proper-ties, which cannot be determined in experiment. These methods are applied to analyse versa-tile biological systems: lipid membrane bilayers stabilized by an intercalated single wall carbon nanotube and retroviral proteins such as HIV protease and integrase. HIV-1 integrase has nuclear localization signals (NLS) which play a crucial role in nuclear import of viral preintegration complex (PIC). However, the detailed mechanisms of PIC formation and its nuclear transport are not known. Previously it was shown that NLSs bind to the cell transport machinery e.g. proteins of nuclear pore complex such as transportins. I investigated the interaction of this viral protein HIV-1 integrase with proteins of the nuclear pore complex such as transportin-SR2 (Shityakov et al., 2010). I showed that the transportin-SR2 in nuclear import is required due to its interaction with the HIV-1 integrase. I analyzed key domain interaction, and hydrogen bond formation in transportin-SR2. These results were discussed in comparison to other retroviral species such as foamy viruses to better understand this specific and efficient retroviral trafficking route. The retroviral nuclear import was next analyzed in experiments regarding the retroviral ability to infect nondividing cells. To accomplish the gene transfer task successfully, ret-roviruses must efficiently transduce different cell cultures at different phases of cell cycle. However, promising and safe foamy viral vectors used for gene transfer are unable to effi-ciently infect quiescent cells. This drawback was due to their inability to create a preintegra-tion complex (PIC) for nuclear import of retroviral DNA. On the contrary, the lentiviral vec-tors are not dependant on cell cycle. In the course of reverse transcription the polypurine tract (PPT) is believed to be crucial for PIC formation. In this thesis, I compared the transduction frequencies of PPT modified FV vectors with lentiviral vectors in nondividing and dividing alveolar basal epithelial cells from human adenocarcinoma (A549) by using molecular cloning, transfection and transduction techniques and several other methods. In contrast to lentiviral vectors, FV vectors were not able to effi-ciently transduce nondividing cell (Shityakov and Rethwilm, unpublished data). Despite the findings, which support the use of FV vectors as a safe and efficient alternative to lentiviral vectors, major limitation in terms of foamy-based retroviral vector gene transfer in quiescent cells still remains. Many attempts have been made recently to search for the potential molecules as pos-sible drug candidates to treat HIV infection for over decades now. These molecules can be retrieved from chemical libraries or can be designed on a computer screen and then synthe-sized in a laboratory. Most notably, one could use the computerized structure as a reference to determine the types of molecules that might block the enzyme. Such structure-based drug design strategies have the potential to save off years and millions of dollars compared to a more traditional trial-and-error drug development process. After the crystal structure of the HIV-encoded protease enzyme had been elucidated, computer-aided drug design played a pivotal role in the development of new compounds that inhibit this enzyme which is responsible for HIV maturation and infectivity. Promising repre-sentatives of these compounds have recently found their way to patients. Protease inhibitors show a powerful sustained suppression of HIV-1 replication, especially when used in combi-nation therapy regimens. However, these drugs are becoming less effective to more resistant HIV strains due to multiple mutations in the retroviral proteases. In computational drug design I used molecular modelling methods such as lead ex-pansion algorithm (Tripos®) to create a virtual library of compounds with different binding affinities to protease binding site. In addition, I heavily applied computer assisted combinato-rial chemistry approaches to design and optimize virtual libraries of protease inhibitors and performed in silico screening and pharmacophore-similarity scoring of these drug candidates. Further computational analyses revealed one unique compound with different protease bind-ing ability from the initial hit and its role for possible new class of protease inhibitors is dis-cussed (Shityakov and Dandekar, 2009). A number of atomistic models were developed to elucidate the nanotube behaviour in lipid bilayers. However, none of them provided useful information for CNT effect upon the lipid membrane bilayer for implementing all-atom models that will allow us to calculate the deviations of lipid molecules from CNT with atomistic precision. Unfortunately, the direct experimental investigation of nanotube behaviour in lipid bilayer remains quite a tricky prob-lem opening the door before the molecular simulation techniques. In this regard, more de-tailed multi-scale simulations are needed to clearly understand the stabilization characteristics of CNTs in hydrophobic environment. The phenomenon of an intercalated single-wall carbon nanotube in the center of lipid membrane was extensively studied and analyzed. The root mean square deviation and root mean square fluctuation functions were calculated in order to measure stability of lipid mem-branes. The results indicated that an intercalated carbon nanotube restrains the conformational freedom of adjacent lipids and hence has an impact on the membrane stabilization dynamics (Shityakov and Dandekar, 2011). On the other hand, different lipid membranes may have dissimilarities due to the differing abilities to create a bridge formation between the adherent lipid molecules. The results derived from this thesis will help to develop stable nanobiocom-posites for construction of novel biomaterials and delivery of various biomolecules for medi-cine and biology. N2 - Molekulare Modellierung und Simulationen sind leistungsstarke Methoden, um wich-tige Informationen von verschiedenen biologischen Systemen, welche nicht durch Experi-mente erschlossen werden können, darzustellen, und deren strukturelle und funktionelle Ei-genschaften aufzuklären. Diese Arbeit untersucht in Simulationen Interaktionen viraler Proteinen sowie von Kohlenstoffenanoröhren mit Membranen und Proteinen. Die HIV-1 Integrase besitzt Kernlokalisierungssignale („nuclear localization signals [NLS]“), welche eine entscheidende Rolle beim Import des viralen Präintegrationskomplexes („preintegration complex [PIC]“) in den Zellkern spielen. Die Ausbildung des PIC und sein Import in den Zellkern sind im Detail noch nicht bekannt. Es wurde bereits gezeigt, dass die NLS an Moleküle des Zelltransportsystems binden, wie z.B. an Transportinkernporen. Im Rahmen meiner Arbeit untersuchte ich die Interaktionen der viralen HIV-1 Integrase mit Proteinen der Kernporen wie dem Transportin-SR2 Protein (Shityakov et al., 2010). Hierbei wurden die möglichen Interaktionen des Transportin-SR2 Protein mit der HIV-1-Integrase und die Bedeutung dieser Interaktionen mit dem Import in den Kern aufgezeigt. Zudem wur-den die Interaktionen der Schlüsseldomänen und die Ausbildung von Wasserstoffbrücken-bindungen im dem Transportin-SR2 Protein untersucht. Die Ergebnisse wurden mit Protein-komplexen andere retroviralen Spezies, wie z.B. dem humanen Spumaretrovirus („human foamy virus [HFV]“), verglichen, um diesen spezifischen und sehr effizienten retroviralen Transportweg in die Wirtszelle zu entschlüsseln. Der experimentelle Teil dieser Arbeit beschäftigte sich damit, den retroviralen Kern-import zu untersuchen, um die Fähigkeit des Retrovirus, nicht teilende Zellen zu infizieren, besser zu verstehen verstanden wird. Um dies zu bewerkstelligen, müssen Retroviren Zellkul-turen in verschiedenen Stadien des Zellzyklus effizient transduzieren. Vielversprechende und sichere- HFV- Vektoren, welche in der Gentherapie eingesetzt werden könnten, sind nicht in der Lage, diese Effizienz bei ruhenden Zellen zu gewährleisten. Dies rührte daher, dass diese nicht in der Lage waren, einen PIC für den Transport der retroviralen DNA auszubilden. Lentivirale Vektoren sind dagegen nicht auf einen bestimmten Zellzyklus angewiesen. Für die reverse Transkription ist der Polypurinteil („polypurine tract [PPT]“) essentiell für die Ausbildung der PIC. In dieser Doktorarbeit vergleiche ich die Transduktionsfrequenz von PPT-modifizierten HFV-Vektoren mit denen von lentiviralen Vektoren in nichtteilenden und tei-lenden Lungenkarzinomepithelzellen. Hierbei wurden Methoden wie Klonierung, Transfektion, und Transduktion (wie auch weitere Methoden) angewendet. Im Gegensatz zu lentiviralen Vektoren konnten HFV-Vektoren sich nicht teilende Zellen in meinen Versuchen nicht effizient transduzieren (Shityakov und Rethwiln, unveröffentlicht). Trotz der Befunde, dass HFV-Vektoren sichere und effiziente Alternativen zu lentiviralen Vektoren darstellen, bestehen immer noch große Einschränkungen, diese HFV-basierten, retroviralen Vektoren für Gentherapien bei ruhenden Zellen einzusetzen. Viele Versuche wurden unternommen, um mögliche, vielversprechende Moleküle, welche als Wirkstoffe für eine HIV-Therapie eingesetzt werden könnten, zu finden. Diese Moleküle können aus chemischen Substanzbibliotheken bezogen werden oder am Computer in silico entworfen und dann synthetisiert werden. Digitalisierte Strukturen können als Refe-renzen benutzt werden, um besser herauszufinden, wie diese Moleküle Typen diverse Enzy-me blokieren könnten. Strukturbasiertes Wirkstoffdesign hat das Potential, viele Jahre und Geld an Entwicklungskosten einzusparen. Nachdem die Kristallstruktur der HIV-kodierten Proteasen aufgeklärt war, spielte das computergestützte Wirkstoffdesign eine zentrale Rolle bei der Entwicklung neuer Wirkstoffe gegen die Protease. Vielversprechende Vertreter dieser Wirkstoffklasse werden seit kurzem nun auch für die Behandlung von Patienten eingesetzt. Proteaseinhibitoren zeigen eine wir-kungsvolle und langanhaltende Inhibition der HIV-1-Replikation; besonders dann, wenn sie in Kombinationstherapien eingesetzt werden. Aber diese Wirkstoffe werden immer weniger effektiv, je resistenter die HIV-Stämme durch Mutationen in den retroviralen Proteasen wer-den. Im Rahmen meiner Arbeit mit computergestütztem Wirkstoffdesign nutzte ich Model-lierungsmethoden wie den „lead expansion algorithm“ (Tripos®) um virtuelle Wirkstoffbibli-otheken mit verschiedenen Affinitäten zur Proteasebindungsstelle zu erstellen. Zusätzlich wandte ich Verfahren der computergestützten, kombinatorischen Chemie an, um virtuelle Bibliotheken von Proteaseinhibitoren zu designen, und zu verbessern. Parallel dazu wurde eine in silico Selektion sowie eine Einteilung nach Pharmakophorähnlichkeiten für diese Kandidaten vorgenommen. Weiterführende computergestützte Analysen förderten einen ein-zigartigen Wirkstoff zu Tage, welcher neuartige Proteasebindungseigenschaften aufweist, und dessen Rolle für eine potentiell neuartige Klasse von Proteaseinhibitoren schon beschrieben wurde (Shityakov und Dandekar, 2009). Eine Reihe von Modellen mit atomarer Auflösung wurden bereits entwickelt, um das Verhalten von Nanoröhren in Lipid-Doppelschichten aufzuklären. Die Auswirkungen auf die molekular Dynamik einer einschichtigen Karbonnanoröhre, welche in das Zentrum einer Lipid-Doppelschicht eingefügt wurde, wurden intensiv studiert und analysiert. Die Normalabweichung und Fluktuationen wurden berechnet, um eine Aussage über die Stabilität der Lipid-Doppelschichten treffen zu können. Die Ergebnisse weisen darauf hin, dass eine eingefügte Karbonnanoröhre die Freiheit für Konformationsänderungen bei nahegelegenen Lipiden einschränkt und dadurch einen Einfluss auf die Membranstabilität hat (Shityakov und Dandekar, 2011). Es kann aber außer-dem sein, dass verschiedene Lipid-Doppelschichten Unterschiede in ihrer Fähigkeit, Brücken zwischen benachbarten Lipiden auszubilden, aufweisen. Viren und Karbonnanoröhren werden damit in verschiedenen dynamischen Simulati-onen untersucht, um mehr über ihre Interaktionen mit Proteinen und Membranen zu erfahren. KW - Kohlenstoff KW - Nanoröhre KW - Retroviren KW - Proteine KW - virale Proteine KW - retroviral proteins KW - nanobiocomposites Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56960 ER - TY - THES A1 - Scherdel, Christian T1 - Kohlenstoffmaterialien mit nanoskaliger Morphologie - Entwicklung neuartiger Syntheserouten T1 - Carbon material featuring nanoscale morphology - Development of novel synthesis routes N2 - Hochporöse Kohlenstoffaerogele, die über den Sol-Gel-Prozeß auf der Basis von Resorzin und Formaldehyd hergestellt werden, sind Werkstoffe mit beeindruckenden physikalischen Eigenschaften. Leider werden bisher nur geringe Mengen an Kohlenstoffaerogelen produziert und aus Kostengründen auf günstigere Materialien mit vergleichsweise schlechteren Eigenschaften zurückgegriffen. Um diesen Nachteil zu nivellieren lag die Motivation der vorliegenden Arbeit in der Entwicklung neuer Syntheserouten für Kohlenstoffmaterialien mit nanoskaliger Morphologie, wobei insbesondere auf kostengünstige Edukte und/oder einfache Prozessierung zurückgegriffen werden sollte. Als in Frage kommende Eduktsysteme wurden Zucker, sowie Hydroxybenzol-Formaldehyd-Derivate ausgewählt. Die hergestellten Kohlenstoffe wurden hauptsächlich mit Elektronenmikroskopie, Gassorption und Röntgenkleinwinkelstreuung (SAXS) charakterisiert. Um Fehlinterpretationen der experimentellen Daten für das neue Materialsystem zu vermeiden, war ein umfangreiches Wissen zu den Charakterisierungsmethoden und den diesen zugrundeliegenden physikalischen Prinzipien notwendig. Kohlenstoffpulver basierend auf sphärischen Resorzin-Formaldehyd Suspensionen und Sedimenten bilden eine völlig neue Möglichkeit zur Erzeugung von Kohlenstoffnanokugeln. Im Rahmen dieser Arbeit wurde deshalb systematisch der Bereich der Syntheseparameter im RF-System zu den nicht-monolithischen Parametersätzen hin vervollständigt. Anhand der bestimmten Daten konnte diese Stoffklasse umfassend und detailliert charakterisiert und interpretiert werden. Die Partikelgröße hängt im Wesentlichen von der Katalysatorkonzentration und in geringerem Maße von der Eduktmenge in der Startlösung ab. Die ermittelte untere Grenze der Partikelgröße aus stabilen kolloidalen Dispersionen beträgt ca. 30 nm. Größere Partikel als 5 µm konnten trotz Modifikation der Syntheseroute nicht erzeugt werden. Eine Abschätzung über den Aggregationsgrad der Kohlenstoffpulver wurde durchgeführt. Eine Beimischung von Phenol verringert in diesem System zum einen die Partikelgröße und erzeugt zunehmend nicht-sphärische Strukturen. Die aus Gassorption, SAXS und dynamischer Lichtstreuung (DLS) ermittelten Partikelgrößen stimmen gut überein. Bei der Pyrolyse schrumpfen die Partikel auf 84% des Ausgangswerts (Partikeldurchmesser). Ein Fokus dieser Arbeit lag in der Herstellung poröser Kohlenstoffe mit Phenol und Formaldehyd (PF) als Eduktbasis und unterkritischer Trocknung (Kohlenstoffxerogele). Um die Bandbreite der Eigenschaften der resultierenden Kohlenstoffxerogele zu erweitern, wurden zahlreiche Modifikationen der Syntheseparameter und im Herstellungsprozeß durchgeführt. Die Ergebnisse zeigen, daß im Eduktsystem Phenol-Formaldehyd in wäßriger Lösung mit Na2CO3 als basischem Katalysator prinzipiell poröse Xerogele herstellbar sind; allerdings verhindert eine ungewöhnliche Gelierkinetik (Flockenbildung statt Sol-Gel-Übergang) eine umfassende Interpretation des Systems, da die Reproduzierbarkeit der Ergebnisse nicht gewährleistet ist. Bei Phenol-Formaldehyd in wäßriger Lösung und NaOH als Katalysator kommt es meist zu einem Kollabieren des Gelnetzwerks während der Trocknung. Lediglich bei hohem Formaldehydüberschuß zeigt sich ein enger Bereich, in dem Xerogele mit geringer Dichte (rhomin = 0,22 g/cm3) und relevantem Mesoporenvolumen von bis zu 0,59 cm3/g synthetisierbar sind. Die interessanteste Kombination im PF-System ergibt sich mit HCl als Katalysator und n-Propanol als Lösungsmittel. Hier sind hochporöse Kohlenstoffxerogele mit geringen Dichten (rhomin = 0,23 g/cm3) und für Xerogele sehr hoher Mesoporosität von bis zu Vmeso = 0,85 cm3/g möglich. Damit ist es im Rahmen dieser Arbeit erstmals gelungen über konvektive Trocknung homogene hochporöse Xerogel-Formkörper auf PF-Basis zu synthetisieren. Aus der Überwachung des Sol-Gel-Prozesses mit Detektion der Soltemperatur konnten wichtige Erkenntnisse über exo- und endotherme Vorgänge gewonnen werden. Zudem zeigt die Zeitabhängigkeit der Soltemperatur Gemeinsamkeiten für alle untersuchten Hydroxybenzol-Formaldehyd-Systeme. So kann der Gelpunkt der Ansätze zuverlässig und auch reproduzierbar anhand eines zweiten lokalen Temperaturmaximums ermittelt werden, welches mit einer Gelpunktsenthalpie korreliert wird. Damit ist auch eine Prozeßkontrolle, z.B. für die Kombination mit Partikeltechnologien, möglich. Die zugrundeliegenden Strukturbildungsmechanismen, Sol-Gel-Prozeß einerseits und Trocknung andererseits, wurden in-situ mittels SAXS beobachtet und anhand der gewonnenen Daten diskutiert und bewertet. Eine vollständige Adaption des etablierten und akzeptierten Bildungsmechanismus von RF basierten Aerogelen (Partikelbildung aus Kondensationskeimen und Partikelwachstum) für das PF-System wird ausgeschlossen. Vielmehr scheint bei den untersuchten PF-Systemen auch eine Mikrophasenseparation als konkurrierender Prozeß zur Partikelbildung von Relevanz zu sein. N2 - Highly porous carbon aerogels derived via the sol-gel-process based on the precursors resorcinol and formaldehyde are materials with impressive physical properties. In principle, they are suited for many applications (e.g. thermal insulations, components in electrochemical devices). Unfortunately, up to now, there are only small amounts of carbon aerogels available. Due to cost efficiency, cheaper materials with less favourable properties compared to carbon aerogels are used. To compensate for this disadvantage, the motivation for this work was the development of new synthesis routes for carbon materials with nanostructured morphology, applying in particular cheap precursors and/or simple processing. As precursor systems, sugar as well as hydroxybenzene-formaldehyde-derivatives were chosen. The produced carbons were characterised in particular by electron microscopy, gas sorption and small-angle X-ray scattering (SAXS). To avoid misinterpretation of the experimental data of the new materials system, extensive knowledge concerning the characterization methods and their underlying physical principles are essential. Carbon powders based on spherical particles derived from suspensions and sediments of resorcinol-formaldehyde (RF) solutions establish a completely new possibility to generate carbon nanospheres. Within the framework of this thesis the range of the synthesis parameters of the RF-system towards the non-monolithic parameter sets was therefore systematically completed. These materials were characterized and interpreted extensively and in detail by using the derived experimental data. The particle size depends essentially on the catalyst concentration rather than on the amount of precursors in the initial solution. The lower limit particle size derived from stable colloidal suspensions is about 30 nm. Larger particles than 5 µm could not be synthesized, even when modifying the synthesis route. An estimate for the level of aggregation of the carbon powders was determined. Admixing of phenol decreases the particle size in this system and generates increasingly non-spherical structures. The evaluated particle sizes derived from gas sorption, SAXS and dynamic light scattering (DLS) are in good agreement with each other. During pyrolysis, the particles shrink to 84% of the initial value (particle size). One goal of this work was the synthesis of porous carbons with phenol and formaldehyde (PF) as precursors and subcritical drying (carbon xerogels). To extend the possible properties of the resulting carbon xerogels, several modifications of the synthesis parameters as well as in the production process were conducted. The results show, that with the precursors phenol-formaldehyde in aqueous solution using Na2CO3 as catalyst, porous xerogels can in principle be synthesized. However, the unusual gelation kinetics (flake forming instead of sol-gel-transition) prevents a detailed interpretation of this system, because the reproducibility of the results can not be ensured. With the system phenol and formaldehyde in aqueous solution using NaOH as catalyst, the gel network mostly collapses during drying. Only with excess formaldehyde a range in the synthesis parameters exists, where xerogels with low density (rhomin = 0,22 g/cm3) and relevant mesopore volume of up to 0,59 cm3/g can be synthesized. The most interesting combination of PF is with HCl as catalyst and n-propanol as solvent. With this system, highly porous carbon xerogels with low densities (rhomin = 0,23 g/cm3) and for xerogels high mesoporosity of up to Vmeso = 0,85 cm3/g can be synthesized. Hence, within the framework of this thesis highly porous monolithic xerogels based on PF as precursors in combination with subcritical drying have been successfully synthesiszed for the first time. Monitoring of the sol-gel-process by detection of the sol temperature provided important information about exo- and endothermal reactions. Moreover, the temperature dependence of the sol shows similarities for all investigated hydroxybenzene-formaldehyde combinations. The gelling point of the precursor systems can be reproduced reliably by determining a second local maximum of the sol temperature, which can be correlated with an enthalpy of gelation (second order process). By this way, a process control is possible, e.g. for the combination with particle technologies. The basic mechanisms of structure formation, i.e. the sol-gel-process on the one hand and the subcritical drying on the other hand were monitored in-situ by SAXS and discussed on the base of the obtained data. A complete adaptation of the established and accepted structure formation mechanism of RF based aerogels (forming and growing of particles by) can be ruled out for the PF-system. Moreover, microphase separation seems to be a relevant competing process for the particle forming in the PF-system. KW - Sol-Gel-Verfahren KW - Kohlenstoff KW - Aerogel KW - Xerogel KW - Phenol-Formaldehyd-Kondensationsprodukt KW - Nanopartikel KW - Adsorption KW - Röntgen-Kleinwinkelstreuung KW - sol-gel-technology KW - xerogel KW - phenolic resin KW - carbon KW - nanoparticle Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-45325 ER - TY - THES A1 - Settelein, Jochen T1 - Kohlenstoffadditive für negative Elektroden von modernen Blei-Säure Batterien T1 - Carbon additives for negative electrodes of modern lead-acid batteries N2 - In vorliegender Dissertation wurde die Wirkweise von Kohlenstoffadditiven auf die verbesserten Ladeeigenschaften negativer Blei-Kohlenstoff Elektroden untersucht, wodurch ein wichtiger Beitrag für die Weiterentwicklung modernen Blei-Säure Batterien geliefert wurde. Neben der Aufklärung der elektrochemischen Prozesse an Kohlenstoffoberflächen, trug die Arbeit dazu bei, das Verständnis hinsichtlich der Rolle des Kohlenstoffs zur Erhöhung der dynamischen Stromaufnahme zu vertiefen und eine Messmethodik zur Bestimmung der Blei-Affinität von Graphitpulver zu entwickeln. Die wichtigsten Erkenntnisse dieser drei Themenfelder werden an dieser Stelle noch einmal zusammengefasst. Elektrochemische Untersuchungen an amorphem Kohlenstoff: Um ein grundsätzliches Verständnis über die elektrochemische Aktivität von Kohlenstoff in verdünnter Schwefelsäure zu erhalten, wurden in Kapitel 4 die elektrochemisch ablaufenden Reaktion an der Phasengrenze Kohlenstoff/verdünnte Schwefelsäure bestimmt und diskutiert. Als Messmethode diente eine rotierende Scheibenelektrode aus glasartigem Kohlenstoff. Im Gegensatz zu inerten, metallischen Elektroden, zeigte sich an glasartigem Kohlenstoff ein deutlich komplexeres Verhalten. Die Kohlenstoffoberfläche verändert sich in Abhängigkeit des anliegenden Potentials signifikant. Für Potentiale über 1,0 V vs. RHE findet eine Oxidation des Kohlenstoffs statt und eine Zersetzung zu CO2. Diese Veränderungen haben wiederum Auswirkungen auf alle anderen elektrochemisch ablaufenden Reaktionen. So wurde durch umfassende zyklovoltammetrische Untersuchungen und mithilfe der differentiellen elektrochemischen Massenspektroskopie erstmals nachgewiesen, dass die Wasserstoffentwicklung durch kurzzeitige Oxidation des Kohlenstoffs signifikant unterdrückt werden kann. Zusätzliche Überspannungen von über einem Volt legen den Verdacht nahe, dass die Adsorption von Protonen verhindert wird und die Zersetzung des Elektrolyten erst durch Radikalbildung bei extremen Potentialen unter 2,0 V vs. RHE stattfindet. Zukünftig lässt sich dieser Effekt möglicherweise dazu einsetzen, die Nebenreaktion in Blei-Säure Batterien gezielt zu verringern . Struktur-Eigenschafts-Beziehung zwischen externer Kohlenstoffoberfläche und dynamischer Stromaufnahme: Im Anschluss an die elektrochemische Analyse der reinen Kohlenstoffelektrode wurde in Kapitel 5 die Struktur-Eigenschafts-Beziehung von amorphem Kohlenstoff auf die elektrochemische Aktivität negativer Blei-Kohlenstoff-Elektroden systematisch untersucht. Hierzu wurden Elektroden aus sechs verschiedenen negativen Aktivmasserezepturen hergestellt, welche sich einzig im zugemischten Kohlenstoffadditiv unterschieden. Durch die Verwendung von Kohlenstoffpulver mit gezielt eingestellter spezifischer Oberfläche, konnte zum ersten Mal nachgewiesen werden, dass allein die externe Kohlenstoffoberfläche relevant für die Erhöhung der Aktivität der Elektrode ist. Zyklovoltammetrische Messungen zeigten, dass sowohl die Wasserstoffentwicklungsreaktion als auch die Doppelschichtkapazität durch eine zusätzlich in die Aktivmasse eingebrachte externe Kohlenstoffoberfläche verstärkt wird. Erstmals wurde ein linearer Zusammenhang zwischen Doppelschichtkapazität und dynamischer Stromaufnahme festgestellt, der belegt, dass die Erhöhung der dynamischen Stromaufnahme auf einen reinen Oberflächeneffekt zurückzuführen ist. Da sowohl der Strom durch die Wasserstoffentwicklung als auch durch die Ladung der Doppelschicht nicht ausreichen, um die erhöhte Stromaufnahme zu erkären, muss davon ausgegangen werden, dass die Bleisulfatreduktion durch den Kohlenstoff katalysiert wird. Erklärungsansätze sind eine vergrößerte aktive Oberfläche an Bleisulfat aufgrund einer eröhten Porosität und die Adsorption des oberflächenaktiven Ligninsulfonats auf der Kohlenstoffoberfläche anstelle der des Bleisulfats . Blei-Affinität von Graphitpulver: Abschließend wurde in Kapitel 6 eine neue Messmethodik evaluiert, um die Elektrokristallisation von Blei auf Kohlenstoffadditiven zu charakterisieren. Hierfür wurde Bleimetall potentiostatisch aus wässriger Lösung auf graphitische Kohlenstoffelektroden abgeschieden und das Kristallwachstum und die Keimzahldichte anhand mikroskopischer Betrachtungen und Modellierung der Strom-Zeit-Transienten analysiert. Es konnte gezeigt werden, dass sich Blei in partikulärer Form an definierten Stellen der Graphitkristalle abscheidet und dass die Anzahl an Keimstellen durch die Höhe der Abscheidespannung variiert werden kann. In Anwesenheit von Ligninsulfonat wird das Keimwachstum verlangsamt und die ursprünglich instantane Keimbildung in eine progressive überführt. Ein für die Anwendung besonders relevantes Ergebnis lieferte der Vergleich zweier kommerzieller Graphitpulver, welche sowohl im Modellversuch, als auch als Additiv in negativen Bleielektroden eine signifikant unterschiedliche Keimzahldichte aufzeigten. Graphite mit einer hohen Kristallitgröße zeigen eine besonders hohe Bleiaffinität. N2 - This study elucidated the mechanism of carbon additives on the improved charging behavior of negative lead-carbon electrodes, thus making a major contribution to further development of modern lead-acid batteries. In addition to the investigation of the electrochemical processes occurring at the interface between carbon and diluted sulfuric acid, a better understanding of the role of carbon additives in the dynamic charge acceptance was gained. Additionally, a new method was established to characterize the affinity of graphite powder towards lead. The major findings of the three main parts of this work are summarized below. Electrochemical activity of amorphous carbon: The electrochemical reactions that take place at the phase boundary carbon/sulfuric acid were defined in chapter 4 in order to have a better general understanding of the electrochemical activity of carbon in dilute sulfuric acid. The measurements were performed on a rotating disc electrode setup with a glassy carbon electrode. The glassy carbon electrode revealed a much more complex behavior in contrast to inert metallic electrodes. Specifically, the carbon surface changes significantly depending on the applied potential. For potentials above 1.0 V vs. RHE, the carbon electrode is oxidized and decomposes into CO2. This affects all of the other electrochemical reactions. Through an extensive study via cyclic voltammetry and differential electrochemical mass spectroscopy, for the first time, evidence could be provided that the hydrogen evolution reaction can be suppressed significantly by a short anodic oxidation of the carbon electrode. An additional overvoltage of more than one volt suggests an impeded adsorption of protons and a generation of molecular hydrogen only for extremely negative potentials below 2.0 V vs. RHE via hydrogen radicals occurs. This effect might be systematically applied in the future to lower the side reactions in lead-acid batteries. Structure-property relationship between amorphous carbon and the dynamic charge acceptance: Following the analysis of the glassy carbon electrode, the structure-property relationship between amorphous carbon and the dynamic charge acceptance of negative lead-carbon electrodes was systematically investigated in chapter 5. Electrodes with six different active material formulations were produced in which only the type of carbon additive was changed. Through the implementation of carbon powders with a tailored specific surface area it could be proven, for the first time that the external surface area of the carbon particles has an effect on the electrochemical activity of the electrode. Cyclic voltammetry revealed an increase in the hydrogen evolution activity as well as double layer capacitance with higher external carbon surface areas. A linear relationship between the double layer capacitance and the dynamic charge acceptance indicated for the first time that the improved charging behavior of the electrodes originates solely from a surface area effect of the carbon additive. It can be concluded that the increase in charge acceptance has to be generated by a catalyzed reduction of lead sulfate as the hydrogen evolution reaction and the double layer charging cannot deliver as much charging current as is observed in the test. This result could be explained by an increased electrochemical active surface area of lead sulfate either by an improved porosity due to the presence of the carbon or by the adsorption of lignosulfonate onto the carbon surface that would otherwise block the lead sulfate. Lead-affinity of graphite: In chapter 6, a new method was introduced to characterize the electrocrystallization of lead on carbon additives. Potentiostatic deposition from aqueous solution was applied to analyze the nucleation and growth mechanism of lead on graphite powder. The number of active nucleation sites was evaluated by microscopic investigation and by modelling of the current-time transients. The measurements revealed that single lead particles are deposited on defined sites of the graphite surface. The number of active sites can be varied by adjusting the deposition overpotential. Lignosulfonate slows the nucleation process and changes the nucleation from an instantaneous to a progressive regime. The comparison of two different commercially available graphite powders provided an important result with respect to the application. Expanded graphite with a big crystallite size exhibits an exceptionally high affinity towards lead. Initial investigations also indicate that a high number of lead particles on graphite is disadvantageous for generating a high dynamic charge acceptance. In this case, a bigger part of the carbon surface area can be covered by lead and therefore reduces the effect of the carbon surface. KW - Kohlenstoff KW - Batterie KW - Blei KW - Akkumulator KW - Elektrochemie KW - Blei-Säure KW - Kohlenstoffadditive KW - Lead-Acid KW - Carbon Additives Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210986 ER - TY - THES A1 - Bozkaya, Begüm T1 - Influence of Carbon Additives on the Electrochemical Performance of Modern Lead-Acid Batteries T1 - Einfluss von Kohlenstoffadditiven auf die elektrochemische Leistung moderner Blei-Säure-Batterien N2 - In the first part of this thesis, a validation of both short-term and long-term DCA tests on 2 V laboratory cells is focussed. The aim is to improve the laboratory cell level measurement technology for dynamic charge acceptance regarding the investigation of carbon additives. To address this issue, it is crucial to apply carbon additives generating a remarkable difference in charge acceptance. For this purpose, five different carbon additives providing a variation in the specific external surface were included as additives in the negative plates of 2 V lead-acid cells. Both short-term (charge acceptance test 2 from SBA and DCA from EN) and long-term (Run-in DCA from Ford) DCA tests were executed on the lead-acid cells. Further understanding of the mechanism was studied by applying electrochemical methods like cyclic voltammetry and electrochemical impedance spectroscopy. The second part of this thesis aims to understand the impact of carbon surface functional groups on the electrochemical activity of the negative electrodes as well as the DCA of 2 V lead-acid cells. In order to address this topic, commercially available activated carbon was modified by different chemical treatments to incorporate specific surface functional groups in the carbon structure. A series of activated carbons having a broad range of pH was prepared, which were used as additives in the negative electrodes. The corresponding lead-acid cells were subjected to cyclic voltammetry and DCA test according to EN. Further, the physical and chemical properties of the functionalized carbon additives were intensively analyzed to establish a structure-property relationship with a focus on DCA. N2 - Im ersten Teil dieser Arbeit geht es um die Validierung von Kurzzeit- und Langzeit-DCA-Tests an 2-V-Laborzellen. Ziel ist es, die Messtechnik für die dynamische Ladungsakzeptanz auf Laborzellenniveau im Hinblick auf die Untersuchung von Kohlenstoffadditiven zu verbessern. Dazu ist es entscheidend, Kohlenstoffadditive einzusetzen, die einen deutlichen Unterschied in der Ladungsakzeptanz bewirken. Zu diesem Zweck wurden fünf verschiedene Kohlenstoffadditive, die eine Variation der spezifischen äußeren Oberfläche bewirken, als Additive in die negativen Platten von 2-V-Blei-Säure-Zellen eingebracht. An den Blei-Säure-Zellen wurden sowohl Kurzzeit- (Ladeakzeptanztest 2 von SBA und DCA von EN) als auch Langzeit-DCA-Tests (Run-in DCA von Ford) durchgeführt. Zum weiteren Verständnis des Mechanismus wurden elektrochemische Methoden wie zyklische Voltammetrie und elektrochemische Impedanzspektroskopie eingesetzt. Der zweite Teil dieser Arbeit zielt darauf ab, den Einfluss der funktionellen Kohlenstoffoberflächengruppen auf die elektrochemische Aktivität der negativen Elektroden sowie auf die DCA von 2-V-Bleisäurezellen zu verstehen. Zu diesem Zweck wurde handelsübliche Aktivkohle durch verschiedene chemische Behandlungen modifiziert, um spezifische funktionelle Oberflächengruppen in die Kohlenstoffstruktur einzubringen. Es wurde eine Reihe von Aktivkohlen mit einem breiten pH-Bereich hergestellt, die als Zusätze in den negativen Elektroden verwendet wurden. Die entsprechenden Blei-Säure-Zellen wurden der zyklischen Voltammetrie und dem DCA-Test gemäß EN unterzogen. Außerdem wurden die physikalischen und chemischen Eigenschaften der funktionalisierten Kohlenstoffadditive intensiv analysiert, um eine Struktur-Eigenschafts-Beziehung mit Schwerpunkt auf DCA herzustellen. KW - Bleiakkumulator KW - Blei KW - Batterie KW - Kohlenstoff KW - Elektrochemie KW - Lead-acid batteries KW - Carbon additives KW - Dynamic charge acceptance KW - Carbon surface chemistry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-319174 ER - TY - THES A1 - Weigel, Tobias Maximilian T1 - Entwicklung von 3D-Herzschrittmacher-Elektroden auf Basis von Kohlenstoffnanofasern T1 - Development of 3D pacemaker electrodes based on carbon nano fibers N2 - Herzschrittmachersysteme sind eine weitverbreitete Möglichkeit Herz-Kreislauf-Erkrankungen zu behandeln. Wegen der natürlichen Reaktion des Immunsystems auf Fremdkörper, erfolgt aber eine fortschreitende Verkapselung der Herzschrittmacherelektrode. Die Folge ist eine ansteigende Verminderung der Stimulationseffizienz durch Erhöhung der Anregungsschwelle. Die Integration der Elektrode in das Gewebe ist dabei mangelhaft und wird bestimmt durch Implantateigenschaften wie Größe, Flexibilität und Dimensionalität. Um die Integration zu verbessern, stellen dreidimensionale (3D) bzw. gewebeartige Elektroden eine Alternative zu den derzeit verwendeten planaren Metallelektroden dar. Zur Entwicklung einer leitfähigen, 3D und faserförmigen Elektrode wurden in dieser Arbeit Kohlenstoff-Nanofaser-Scaffolds über Elektrospinnen hergestellt. Durch die Modifikation des Fasergerüstes mit Natriumchlorid (NaCl) während der Scaffoldherstellung, konnte das Fasernetzwerk aufgelockert und Poren generiert werden. Die Kohlenstofffaser-Elektroden zeigten einen effizienten Energieübertrag, welcher vergleichbar mit heutigen Titannitrid (TiN) -Elektroden ist. Die Auflockerung des Fasergewebes hatte eine verbesserte Flexibilität des Faserscaffolds zu Folge. Neben der Flexibilität, konnte auch die Infiltration von Zellen in das poröse Faserscaffold erheblich verbessert werden. Dabei konnten Fibroblasten durch das gesamte Scaffold migrieren. Die Kompatibilität mit kardialen Zellen, die Grundvoraussetzung von Herzschrittmacherelektroden, wurde in vitro nachgewiesen. Durch die Kombination aus dem 3D-Elektrodengerüst mit einer Co-Kultur aus humanen Kardiomyozyten, mesenchymalen Stammzellen und Fibroblasten, erfolgte eine Einbettung der Elektrode in funktionelles kardiales Gewebe. Dadurch konnte ein lebender Gewebe-Elektroden-Hybrid generiert werden, welcher möglicherweise die Elektrode vor Immunzellen in vivo abschirmen kann. Eine Zusammenführung der hybriden Elektrode mit einen Tissue-Engineerten humanen kardialen Patch in vitro, führte zu Bildung einer nahtlosen Elektronik-Gewebe-Schnittstelle. Die fusionierte Einheit wurde abschließend auf ihre mechanische Belastbarkeit getestet und konnte über einen Elektroden-Anschluss elektrisch stimuliert werden. N2 - The application of pacemaker systems is a widespread treatment of cardiovascular diseases. The inflammatory interaction of the immune system and the implant results in the formation of a fibrous capsule around the pacemaker’s electrode. The consequence is a progressing reduction of the stimulation efficiency by an increased excitation threshold. The primary cause of the encapsulation is the deficient integration of the electrode into the cardiac tissue, which is induces by the incompatible implant properties like size, flexibility and dimensionality. To improve the electrode’s integration, the application of three dimensional and tissue imitating electrodes represent an improvement of currently implanted planar electrodes. To develop a conductive and fibrous 3D-electrode, carbon nanofiber scaffolds were generated by electrospinning. By modifying the fiber network with NaCl during the scaffold preparation, the mesh openings could be loosened and pores generated. An efficient energy transfer of the resulting carbon fiber electrodes was demonstrated and is comparable to today's TiN electrodes. The loosening of the fiber network resulted in improved flexibility of the scaffold. In addition to the flexibility, the infiltration of cells into the porous fiber scaffold could be significantly enhanced. Thereby, fibroblasts were enabled to migrate through the entire scaffold. For application as a pacemaker electrode, the compatibility of the tissue electrode with cardiac cells in vitro was demonstrated. The combination of the 3D electrode Scaffold with a co-culture of human cardiomyocytes, mesenchymal stem cells and fibroblasts led to a partially embedded electrode in functional cardiac tissue. As a result, a living tissue-electrode hybrid could be generated which could possibly shield the electrode from immune cells in vivo. Implantation of the hybrid electrode into a tissue engineered human heart patch in vitro resulted in a seamless electronic tissue interface. This fused unit was conclusively tested for its functionality, like mechanical stability and the electrical stimulation of the patch by the in grown hybrid electrode. KW - Herzschrittmacher KW - Elektrode KW - Kohlenstoff KW - Nanofaser KW - 3D-Elektrode KW - electrode scaffold KW - Zell-Migration KW - Stimulation KW - Kohlenstofffaser KW - Elektrospinnen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176362 ER - TY - THES A1 - Wulfert-Holzmann, Paul T1 - Die elektrische Leitfähigkeit des negativen Aktivmaterials moderner Blei-Säure-Batterien T1 - The electrical conductivity of the negative active material in modern lead-acid batteries N2 - Diese Doktorarbeit beschäftigt sich mit dem Wirkmechanismus der elektrischen Leitfähigkeit in Blei-Säure-Batterien. Obwohl ihm eine zentrale Rolle beim „Kohlenstoff-Effekt“ zugeordnet wird, ist der Wirkmechanismus der elektrischen Leitfähigkeit bislang vergleichsweise wenig untersucht worden und konnte dementsprechend noch nicht vollständig aufgeklärt werden. Mit dem Anspruch, diese Forschungslücke zu schließen, zielt die vorliegende Doktorarbeit darauf ab, den Einfluss der elektrischen Leitfähigkeit auf die Performance der Blei-Säure-Batterie systematisch herauszuarbeiten und so einen Beitrag zur Generierung neuer Entwicklungsansätze zu leisten, z. B. in Form von maßgeschneiderten Additiven. Bislang ist noch unklar, ob allein die elektrische Leitfähigkeit des Aktivmaterials relevant ist oder diese auch durch Additive beeinflusst wird. Das liegt vor allem daran, dass geeignete Messmethoden fehlen und deshalb der Einfluss von Additiven auf die elektrische Leitfähigkeit des Aktivmaterials wenig untersucht wurde. Deswegen zielt diese Arbeit auch darauf ab, eine neuartige Messmethode zu entwickeln, um die elektrische Leitfähigkeit des Aktivmaterials im laufenden Betrieb bestimmen zu können. Aufgrund der Vorkenntnisse und Vorarbeiten am Fraunhofer ISC werden die Untersuchungen dabei auf die negative Elektrode limitiert. Insgesamt unterteilt sich die Doktorarbeit in die zwei Abschnitte. Im ersten Abschnitt werden elektrisch isolierende Stöber-Silica als Additive im negativen Aktivmaterial eingesetzt, um den Einfluss der elektrischen Leitfähigkeit des Additivs auf die elektrochemischen Eigenschaften der Batterie herauszustellen. Untersucht wird dabei die u.a. die Doppelschichtkapazität, die Wasserstoffentwicklung und die dynamische Ladeakzeptanz. Im zweiten Abschnitt steht die elektrische Leitfähigkeit des negativen Aktivmaterials im Fokus. Es wird zunächst eine neue Messmethodik entwickelt, die ihre in-situ- und operando-Bestimmung ermöglicht. Nach einer umfassenden Evaluierung und der Betrachtung verschiedener Betriebsparameter wird die Methodik für eine erste proof-of-concept-Messreihe angewendet, um den Einfluss von Additiven auf die elektrische Leitfähigkeit des negativen Aktivmaterials zu untersuchen. N2 - This dissertation deals with the effect mechanism of electrical conductivity in lead-acid batteries. Although it is believed to play a key role in the "carbon effect", the effect mechanism of electrical conductivity has been studied to lesser extent than other factors so far and accordingly has not yet been fully elucidated. With the aim of closing this research gap, the present dissertation aims to systematically work out the influence of electrical conductivity on lead-acid battery performance and thus contribute to the generation of new development approaches, e.g. in the form of tailored additives. So far, it is still unclear whether the electrical conductivity of the active material alone is relevant or whether this is also influenced by additives. This is mainly due to the fact that suitable measurement methods are lacking and therefore the influence of additives on the electrical conductivity of the active material has been investigated to less extent. Therefore, this work also aims to develop a novel measurement method to determine the electrical conductivity of the active material during operation. Due to the previous knowledge and work at Fraunhofer ISC, the investigations are limited to the negative electrode. Overall, the thesis is divided into two sections. In the first section, electrically insulating Stöber silica particles are used as additives in the negative active material in order to highlight the influence of the electrical conductivity of the additive on the electrochemical properties of the battery. Among other things, the double-layer capacitance, hydrogen evolution and dynamic charge acceptance are investigated. The second section focuses on the electrical conductivity of the negative active material. First, a new measurement methode is developed that allows its in-situ and operando determination. After a comprehensive evaluation and consideration of various operational parameters, the methodology is applied to a first proof-of-concept series of measurements to investigate the influence of additives on the electrical conductivity of the negative active material. KW - Bleiakkumulator KW - Blei KW - Batterie KW - Kohlenstoff KW - Elektrochemie KW - Blei-Säure-Batterie KW - Stöber-Silica KW - operando-Messung KW - Lead-acid batteries KW - Stöber silica Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-298397 ER -