TY - JOUR A1 - Winter, Michael A1 - Pryss, Rüdiger A1 - Probst, Thomas A1 - Reichert, Manfred T1 - Towards the applicability of measuring the electrodermal activity in the context of process model comprehension: feasibility study JF - Sensors N2 - Process model comprehension is essential in order to understand the five Ws (i.e., who, what, where, when, and why) pertaining to the processes of organizations. However, research in this context showed that a proper comprehension of process models often poses a challenge in practice. For this reason, a vast body of research exists studying the factors having an influence on process model comprehension. In order to point research towards a neuro-centric perspective in this context, the paper at hand evaluates the appropriateness of measuring the electrodermal activity (EDA) during the comprehension of process models. Therefore, a preliminary test run and a feasibility study were conducted relying on an EDA and physical activity sensor to record the EDA during process model comprehension. The insights obtained from the feasibility study demonstrated that process model comprehension leads to an increased activity in the EDA. Furthermore, EDA-related results indicated significantly that participants were confronted with a higher cognitive load during the comprehension of complex process models. In addition, the experiences and limitations we learned in measuring the EDA during the comprehension of process models are discussed in this paper. In conclusion, the feasibility study demonstrated that the measurement of the EDA could be an appropriate method to obtain new insights into process model comprehension. KW - process model KW - process model comprehension KW - electrodermal activity KW - sensor Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211276 SN - 1424-8220 VL - 20 IS - 16 ER - TY - THES A1 - Klein, Alexander T1 - Performance Issues of MAC and Routing Protocols in Wireless Sensor Networks T1 - Leistungsbeschränkende Faktoren von MAC und Routingprotokollen in drahtlosen Sensornetzen N2 - The focus of this work lies on the communication issues of Medium Access Control (MAC) and routing protocols in the context of WSNs. The communication challenges in these networks mainly result from high node density, low bandwidth, low energy constraints and the hardware limitations in terms of memory, computational power and sensing capabilities of low-power transceivers. For this reason, the structure of WSNs is always kept as simple as possible to minimize the impact of communication issues. Thus, the majority of WSNs apply a simple one hop star topology since multi-hop communication has high demands on the routing protocol since it increases the bandwidth requirements of the network. Moreover, medium access becomes a challenging problem due to the fact that low-power transceivers are very limited in their sensing capabilities. The first contribution is represented by the Backoff Preamble-based MAC Protocol with Sequential Contention Resolution (BPS-MAC) which is designed to overcome the limitations of low-power transceivers. Two communication issues, namely the Clear Channel Assessment (CCA) delay and the turnaround time, are directly addressed by the protocol. The CCA delay represents the period of time which is required by the transceiver to detect a busy radio channel while the turnaround time specifies the period of time which is required to switch between receive and transmit mode. Standard Carrier Sense Multiple Access (CSMA) protocols do not achieve high performance in terms of packet loss if the traffic is highly correlated due to the fact that the transceiver is not able to sense the medium during the switching phase. Therefore, a node may start to transmit data while another node is already transmitting since it has sensed an idle medium right before it started to switch its transceiver from receive to transmit mode. The BPS-MAC protocol uses a new sequential preamble-based medium access strategy which can be adapted to the hardware capabilities of the transceivers. The protocol achieves a very low packet loss rate even in wireless networks with high node density and event-driven traffic without the need of synchronization. This makes the protocol attractive to applications such as structural health monitoring, where event suppression is not an option. Moreover, acknowledgments or complex retransmission strategies become almost unnecessary since the sequential preamble-based contention resolution mechanism minimizes the collision probability. However, packets can still be lost as a consequence of interference or other issues which affect signal propagation. The second contribution consists of a new routing protocol which is able to quickly detect topology changes without generating a large amount of overhead. The key characteristics of the Statistic-Based Routing (SBR) protocol are high end-to-end reliability (in fixed and mobile networks), load balancing capabilities, a smooth continuous routing metric, quick adaptation to changing network conditions, low processing and memory requirements, low overhead, support of unidirectional links and simplicity. The protocol can establish routes in a hybrid or a proactive mode and uses an adaptive continuous routing metric which makes it very flexible in terms of scalability while maintaining stable routes. The hybrid mode is optimized for low-power WSNs since routes are only established on demand. The difference of the hybrid mode to reactive routing strategies is that routing messages are periodically transmitted to maintain already established routes. However, the protocol stops the transmission of routing messages if no data packets are transmitted for a certain time period in order to minimize the routing overhead and the energy consumption. The proactive mode is designed for high data rate networks which have less energy constraints. In this mode, the protocol periodically transmits routing messages to establish routes in a proactive way even in the absence of data traffic. Thus, nodes in the network can immediately transmit data since the route to the destination is already established in advance. In addition, a new delay-based routing message forwarding strategy is introduced. The forwarding strategy is part of SBR but can also be applied to many routing protocols in order to modify the established topology. The strategy can be used, e.g. in mobile networks, to decrease the packet loss by deferring routing messages with respect to the neighbor change rate. Thus, nodes with a stable neighborhood forward messages faster than nodes within a fast changing neighborhood. As a result, routes are established through nodes with correlated movement which results in fewer topology changes due to higher link durations. N2 - Im Rahmen dieser Arbeit werden leistungsbeschränkende Faktoren von Medium Access Control (MAC) und Routingprotokollen im Kontext von drahtlosen Sensornetzen untersucht. Zunächst werden typische Probleme des Funkkanals diskutiert. Anschließend führen eine Einteilung von MAC Protokollen, sowie eine Gegenüberstellung relevanter Protokolle in die Thematik ein. Daraufhin werden hardwarelimitierende Faktoren und deren Auswirkung auf die Effizienz von Kanalzugriffsprotokollen untersucht. Des Weiteren wird das vom Autor entwickelte Backoff Preamble-based MAC Protokoll (BPS-MAC) vorgestellt, welches auf die limitierten Fähigkeiten sensortypischer Hardware eingeht und für dichte Sensornetze mit korreliertem Datenverkehr optimiert ist. Ein weiterer Schwerpunkt dieser Arbeit stellt das Thema Routing dar. Hier wird ebenfalls mit einer Einteilung der Protokolle in die Thematik eingeführt. Darüber hinaus werden die wichtigsten Aufgaben von Routingprotokollen vorgestellt. Ein Überblick über häufig verwendete Routingmetriken und Routingprotokolle schließen die Einführung in diesen Themenkomplex ab. Abschließend wird das im Rahmen der Dissertation entwickelte Statistic-Based-Routing (SBR) Protokoll vorgestellt, welches ebenfalls für drahtlose Sensornetze optimiert ist. Der letzte Schwerpunkt beschreibt die Problematik der Leistungsbewertung von Routingprotokollen hinsichtlich klassischer Leistungsparameter wie Paketverlust und Verzögerung. Ebenfalls werden weitere Leistungsparameter wie zum Beispiel die vom Nutzer wahrgenommene Netzqualität genauer untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/10 KW - Routing KW - Drahtloses Sensorsystem KW - Leistungsbewertung KW - Diskrete Simulation KW - MAC KW - Kanalzugriff KW - Medium KW - MAC KW - routing KW - sensor KW - networks KW - simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52870 ER - TY - THES A1 - Waidelich, Michael T1 - Neue Aspekte zum Design von ionensensitiven und solvatochromen Fluoreszenzsensoren T1 - New aspects in the design of ion sensitive and solvatochrome fluorescence probes N2 - Neuartige Akzeptor-substituierte Fluoresenzsensoren wurden etabliert, die durch signifikante Rotverschiebung der Emissionsmaxima Analyten nachweisen und deren pH-Sensitivität über das Substitutionsmuster variierbar ist. Es wurde gezeigt, dass 2-Methoxyanthracenderivate eine duale Emission aufweisen, die in dieser Form noch nicht detektiert und untersucht worden ist. Desweiteren wurde ein neues Strukturelement für stark solvatochrome Proben etabliert, die als Fluoreszenzsensoren zur Detektion von Fluorid und Analyten mit hoher Akzeptornummer verwendet werden können. Außerdem konnte eine Fluoreszenzsonde als Leucht-Sensor zur selektiven, differenzierenden Detektion von Fluorid und Chlorid generiert werden. N2 - Novel acceptor substituted fluorescence probes were established, which may detect analytes by significant red shifts of the emission maxima and whose pH sensitivity may be modified by variation of the substitution pattern. It was shown, that 2-Methoxyantracene derivatives exhibit a dual emission, which has not been detected or studied before. Furthermore, a new structural feature for strong solvatochromic probes was established, which can be used as fluorescence probe to detect fluoride ions and analytes with high acceptor number. At least, a fluorescence probe that represents a “light-up probe” for selective and differentiating detections of fluoride and chlorid anions was generated. KW - Fluoreszenzsonde KW - Fluoreszenzsolvatochromie KW - Anthracenderivate KW - Fluoreszenz KW - Anthracen KW - Sensor KW - Solvatochromie KW - Sonde KW - fluorescence KW - anthracene KW - sensor KW - solvatochromism KW - probe Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15578 ER - TY - THES A1 - Loisel, Claudine T1 - Korrosionsempfindliche Dosimetermaterialien zur Überwachung der Umweltbedingungen an Kulturgütern T1 - Corrosion sensitive dosimeter material for environmental condition control in culture heritage N2 - Das Ziel dieser Arbeit war es, ein neues Dosimetermaterial zu entwickeln, das schneller reagiert als der klassische Glassensor. Einen vielversprechenden Ansatz dafür bietet der Sol-Gel Prozeß, mit dem dünne Schichten hergestellt werden können. Erste Versuche mit transparenten Schichten einer glasähnlichen Zusammensetzung (mit einem hohen Anteil an K und Ca) waren nicht erfolgreich, da eine deutliche Erhöhung der Reaktivität nicht erreicht wurde. Schichten, die einen sehr hohen Ca-Anteil aufweisen, zeigten allerdings die gewünschte Empfindlichkeit gegen Umwelteinflüsse. Die neuen „Rapid-Sensoren“ werden aus einem vorkonsensierten SiO2-Sol (Silizium (IV) Oxid-Sol) und Ca(NO3)2 4H2O in Aceton (Molverhältnis Ca : Si = 10 : 1) hergestellt. Objektträger werden mit diesem Sol beidseitig beschichtet. Die Tauchbeschichtung und die Temperung (5 Minuten bei 600 °C) wurden auf hohe Empfindlichkeit gegen Feuchtigkeit und Schadgase (Screening Test in einer Klimakammer) optimiert. Die neuen Sensoren sind im sichtbaren Spektralbereich nicht transparent, sondern opak, können aber wie die klassischen Glassensoren mit IR-Spektroskopie (in Transmission) ausgewertet werden, wobei der Anstieg der OH-Bande bei 3300 cm-1 als Mass für den Korrosionsfortschritt (genannt E-Wert) dient. Die aktive Sensorschicht setzt sich aus kristallinen und amorphen Bestandteilen zusammen. Die Zusammensetzung und Morphologie der Kristallphase wurde weitestgehend charakterisiert. Mit Lichtmikroskopie lässt sich die Oberfläche des Rapid-Sensors als eine Vielzahl kleiner polygoner Kristalle charakterisieren, für die im REM beobachtet verschiedene Wachstumsstufen erkennbar sind. Mit Hilfe der EDX-Analyse und ICP-AES wurden Si, O, Ca und Na als die Hauptelemente der Schicht bestimmt. Mit SNMS-Tiefenprofil konnte eine Diffusion von Na aus dem Objektträger in die Schicht nachgewiesen werden, was zu einer besonders guten Haftung führt. Mittels Röntgendiffraktometrie, IR- und Raman-Spektroskopie lassen sich Informationen über die Struktur der Schicht erhalten: die Kristallphase besteht aus einer Mischung aus Calciumoxid und Calcium-silicat-en, die mit XRD schwer zu unterscheiden sind. Auch im infraroten Spektralbereich weisen die Si-O-Schwingungen auf silicathaltige, Bestandteile in der amorphen Schicht hin. Für die Kalibrierung des neuen Dosimetermaterials sind Bewitterungen unter kontrollierten Bedingungen grundlegend notwendig. Dazu wurde ein Bewitterunsprogramm (I) mit hoher Feuchte und Temperatur (40 °C, 98 % r.F.) sowie ein zweites mit Zugabe von SO2 als Schadgas (II) gewählt. Beide Programme beschleunigen die Umweltwirkung im Vergleich zu Realbedingungen und haben sich in anderen Versuchen mit klassischen Glassensoren bewährt. Zusammenfassend lässt sich aus den Bewitterungsversuchen feststellen, dass der neue Sensor integrativ auf Temperatur, Feuchte, und Schadgas reagiert. Entsprechend der Reaktion des klassischen Sensors führt eine Temperatur / Feuchte- Bewitterung zur Bildung von CaCO3-Kristallen, während bei Anwesenheit von SO2 bevorzugt Gipskristalle gebildet werden. Diese Parallelen lassen den Schluß auf ein vergleichbares Reaktionsprinzip zu, obwohl die Reaktion der Calciumsilicate, aus denen die Schicht besteht, nur bedingt mit der für Glas typischen Verwitterung vergleichbar ist. Mit REM kann man bei Rapid-Sensoren beobachten, dass die Reaktion am Rand der Kristalle beginnt und in die Tiefe fortschreitet, bis zur vollständigen Umsetzung (Sättigung). Die kristallinen Korrosionsprodukte breiten sich im weiteren Verlauf auch auf der amorphen Schicht aus. Der Mechanismus ist nicht reversibel und entspricht damit nicht dem für poröse SiO2-Schichten beschriebenen Alterungprozeß. Erste Sensorstudien unter natürlicher Bewitterungsbedingungen ermöglichen einen Vergleich mit klassischen Glassensoren und umreissen das künftige Einsatzspektrum. Expositionen in der ISC-Außenstelle Bronnbach und im Grünen Gewölbe in Dresden zeigen, dass die Rapid-Sensoren schneller reagieren als klassische Glassensoren (Steigerung um etwa Faktor 3). Unter moderat korrosiven Bedingungen im Innenraum sind 4 Wochen Expositionszeit günstig (mindestens 3 Monate für Glassensoren) während im Außenraum Rapid-Sensoren innerhalb von 7 Tagen ansprechen (einige Wochen für herkömmliche Glassensoren). N2 - The goal of this work was to develop a new dosimeter material, which reacts faster than the classical glass sensor. The sol-gel process offers a promising approach for the preparation of thin layers. First attempts with transparent layers with a composition similar sensitive glass (with a high concentration of K and Ca) were not successful, since a clear increase of reactivity was not reached. Layers, which exhibit a very high calcium concentration finally showed the desired sensitivity to environmental influences. The new "Rapid-Sensor" is prepared from a pre-condensed SiO2-Sol (silicon (IV) oxide Sol) and Ca(NO3)24H2O in acetone (molar ratio Ca : Si = 10 : 1). Microscopic slides are coated with this sol from both sides by dip coating. The curing process (5 minutes at 600 °C) has been optimised for high sensitivity to humidity and pollutants (screening test in a climatic chamber). The new sensors are not transparent, but opaque. Nevertheless, they can be evaluated like the classical glass sensors with IR spectroscopy (in transmission mode), whereby the increase of the OH-band at 3300 cm-1 serves as a measure for the corrosion progress (so-called E-value). The sensitive coating consists of crystalline and amorphous components. The composition and morphology of the crystal phase were characterised as far as possible. With light microscopy the surface of the Rapid-Sensor can be described as a multiplicity of small polygonal crystals, for which in the SEM different growth steps are recognisable. With EDX and ICP AES analysis, the elements Si, O, Ca were determined as the main elements of the layer. With SNMS depth profile the diffusion of Na from the support (microscopic slide) into the layer can be proven, what leads to a particularly good adhesion. By means of X-ray, IR and Raman spectroscopy information about the structure can be received: the crystal phase consists of a mixture of calcium oxides and silicates, which can not be differentiated further with XRD. In the infrared spectrum signals designated to vibrations of Si-O confirm that silicates are present in the amorphous layer. For the calibration of the new dosimeter material, weathering experiments under controlled conditions are fundamentally necessary. Therefore, an accelerated ageing program (I) with high humidity and temperature (40 °C, 98 % r.F.) as well as a second program with the addition of SO2 as pollutants (II) has been selected. Both programs accelerate the environmental effect as compared with natural conditions and have been applied in previous experiments with classical glass sensors. As a conclusion, it can be stated from the environmental testing that the new sensor integrates the impact of temperature, humidity, and pollutants. Similar to the reaction of the classical sensor weathering at high temperature and high humidity leads to the formation of CaCO3 crystals, whereas in the presence of SO2 gypsum crystals are preferably formed. These similarities permit the conclusion that a comparable reaction principle might exist, although the reaction of the calcium silicate, of which the layer consists, is not necessarily comparable with the typical glass weathering. With SEM one can observe that the reaction of Rapid-Sensors begins at the edge of the crystals and progresses into depth, up to complete conversion (saturation) has been achieved. The crystalline corrosion products spread over the amorphous layer. The mechanism is not reversible and does not correspond thereby to the ageing process described for porous coatings of SiO2. First sensor studies under natural weathering conditions make a comparison possible with classical glass sensors and outline the future spectrum of use. Exposures in Bronnbach and in the Grünen Gewölbe Museum (Green Dome) in Dresden show that the Rapid-Sensors react faster than classical glass sensors (about three times increase). Under moderately corrosive conditions indoor 4 weeks exposure time are requested (at least 3 months for glass sensors). For outdoor applications Rapid-Sensors respond favourably within 7 days (some weeks for conventional glass sensors). KW - Kulturgut KW - Korrosion KW - Feuchtigkeitssensor KW - Temperatursensor KW - Gassensor KW - Dosimeter KW - Sensor KW - Korrosionsempfindliche KW - Glas KW - Silicate KW - dosimeter KW - sensor KW - corrosion sensitive KW - glass KW - silicate Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-10835 ER - TY - JOUR A1 - Krueger, Beate A1 - Friedrich, Torben A1 - Förster, Frank A1 - Bernhardt, Jörg A1 - Gross, Roy A1 - Dandekar, Thomas T1 - Different evolutionary modifications as a guide to rewire two-component systems JF - Bioinformatics and Biology Insights N2 - Two-component systems (TCS) are short signalling pathways generally occurring in prokaryotes. They frequently regulate prokaryotic stimulus responses and thus are also of interest for engineering in biotechnology and synthetic biology. The aim of this study is to better understand and describe rewiring of TCS while investigating different evolutionary scenarios. Based on large-scale screens of TCS in different organisms, this study gives detailed data, concrete alignments, and structure analysis on three general modification scenarios, where TCS were rewired for new responses and functions: (i) exchanges in the sequence within single TCS domains, (ii) exchange of whole TCS domains; (iii) addition of new components modulating TCS function. As a result, the replacement of stimulus and promotor cassettes to rewire TCS is well defined exploiting the alignments given here. The diverged TCS examples are non-trivial and the design is challenging. Designed connector proteins may also be useful to modify TCS in selected cases. KW - histidine kinase KW - connector KW - Mycoplasma KW - engineering KW - promoter KW - sensor KW - response regulator KW - synthetic biology KW - sequence alignment Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123647 N1 - This is an open access article. Unrestricted non-commercial use is permitted provided the original work is properly cited. VL - 6 ER - TY - THES A1 - Nikolaev, Viacheslav T1 - Development and application of fluorescent cAMP und cGMP biosensors T1 - Entwicklung und Anwendung fluoreszierender Biosensoren für cAMP und cGMP N2 - The cyclic nucleotides cAMP and cGMP are two ubiquitous important second messengers, which regulate diverse physiological responses from vision and memory to blood pressure and thrombus formation. They act in cells via cAMP- and cGMP-dependent protein kinases (PKA and GK), cyclic nucleotide-gated channels and Epac. Although the concept of cyclic nucleotide signalling is well developed based on classical biochemical studies, these techniques have not allowed to analyze cAMP and cGMP in live cells with high temporal and spatial resolution. In the present study fluorescence resonance energy transfer was used to develop a technique for visualization of cAMP and cGMP in live cells and in vitro by means of fluorescent biosensors. Ligand-induced conformational change in a single nucleotide-binding domain flanked with green fluorescent protein mutants was used for dynamic, highly sensitive measurements of cAMP and cGMP. Such biosensors retained binding properties and chemical specificity of unmodified domains, allowing to image cyclic nucleotides in a physiologically relevant range of concentrations. To develop cAMP-sensors, binding domains of PKA, Epac and cAMP-gated HCN-channel were used. cGMP-sensors were based on single domains of GK and phosphodiesterases (PDEs). Sensors based on Epac were used to analyze spatio-temporal dynamics of cAMP in neurons and macrophages, demonstrating that cAMP-gradients travel with a high speed (~ 40 μm/s) throughout the entire cytosol. To understand the mechanisms of cAMP-compartmentation, kinetics properties of phosphodi-esterase (PDE2) were, next, analyzed in aldosterone producing cells. PDE2 is able to rapidly hydrolyze extensive amounts of cAMP, so that the speed of cAMP-hydrolysis is much faster than that of its synthesis, which might serve as a basis of compartmentation. cAMP-sensors were also used to develop a clinically relevant diagnostic method for reliable detection of β1-adrenergic receptor autoantibodies in cardiac myopathy patients, which has allowed to significantly increase the sensitivity of previously developed diagnostic approaches. Conformational change in a single binding domain of GK and PDE was, next, used to create novel fluorescent biosensors for cGMP. These sensors demonstrated high spatio-temporal resolution and were applied to analyze rapid dynamics of cGMP production by soluble and particulate guanylyl cyclases as well as to image cGMP in mesangial cells. In summary, highly sensitive biosensors for cAMP and cGMP based on single cyclic nucleotide-binding domains have been developed and used in various biological and clinically relevant applications. N2 - Die zyklischen Nukleotide cAMP and cGMP sind zwei ubiquitäre Botenstoffe, die verschiedene physiologische Prozesse regulieren, vom Sehen und Gedächtnis bis zu Blutdruck und Thrombusbildung. Sie wirken über cAMP- und cGMP-abhängige Kinasen (PKA und GK), Kanäle und Epac. Obgleich die Funktionen von zyklischen Nukleotiden in klassischen biochemischen Studien gut untersucht sind, ermöglichen diese Methoden nicht, cAMP und cGMP in lebenden Zellen mit hoher zeitlicher und räumlicher Auflösung zu analysieren. In dieser Arbeit wurde Fluoreszenzresonanzenergietransfer benutzt, um eine Technik für die Visualisierung von cAMP and cGMP in lebenden Zellen und in vitro zu entwickeln. Ligand-induzierte Konformationsänderung in einer einzelnen, mit Grünfluoreszenzproteinmutanten fusionierten Bindungsdomäne diente als Grundlage für Biosensoren, die dynamische, hochsensitive Messungen von cAMP und cGMP ermöglichen. Bei solchen Sensoren wurden die chemischen und Bindungseigenschaften von unmodifizierten Domänen aufrechterhalten, was die cAMP- und cGMP-Messungen im physiologischen Konzentrationsbereich in lebenden Zellen ermöglicht. Für die Entwicklung der cAMP-Sensoren wurden die Domänen von PKA, Epac und von einem cAMP- gesteuerten HCN-Kanal benutzt. cGMP-Sensoren beruhen sich auf den Bindungsdomänen von GK und Phosphodiesterasen (PDEs). Mit Hilfe der auf Epac-basierten Sensoren wurde die cAMP-Dynamik in Neuronen und Makrophagen zeitlich und räumlich aufgelöst. In diesen Zellen diffundiert cAMP mit hoher Geschwindigkeit (~ 40 μm/s) frei durch das ganze Zytosol. Um die Mechanismen der cAMP-Kompartimentierung besser zu verstehen, wurden die kinetischen Eigenschaften der PDE2 in aldosteronproduzierenden Zellen analysiert. PDE2 ist imstande, große Mengen von cAMP äußerst schnell zu hydrolisieren, so dass die Geschwindigkeit der cAMP-Hydrolyse viel höher ist als von cAMP-Synthese, was eine Grundlage der cAMP-Kompartimentierung sein könnte. cAMP-Sensoren wurden auch benutzt, um eine klinisch relevante diagnostische Methode zu entwickeln, die Autoantikörper gegen β1-adrenergen Rezeptoren bei Herzinsuffizienzpatienten zuverlässig nachweist. Diese Methode hat ermöglicht, die Sensitivität der früher entwickelten Techniken zu verbessern. Konformationsänderung in einzelnen Bindungsdomänen von GK und PDE wurde als nächstes benutzt, um ein Reihe neuer fluoreszierender Biosensoren für cGMP zu entwickeln. Diese Sensoren zeigten hohe räumliche und zeitliche Auslösung und wurden zur Analyse schneller Dynamik von cGMP-Synthese und für cGMP-Imaging in Mesangialzellen angewandt. Zusammenfassend wurden hochsensitive Biosensoren für cAMP und cGMP auf Grund einzelner, mit Grünfluoreszenzproteinmutanten fusionierter Bindungs-domäne entwickelt und in verschiedenen biologischen und klinisch relevanten Applikationen eingesetzt. KW - Cyclo-AMP KW - Cyclo-GMP KW - Biosensor KW - Fluoreszenz KW - Fluoreszenz-Resonanz-Energie-Transfer KW - cAMP KW - cGMP KW - FRET KW - Fluoreszenz KW - Sensor KW - cAMP KW - cGMP KW - FRET KW - fluorescence KW - sensor Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15673 ER -