TY - JOUR A1 - Osmers, Maria T1 - Zwischen Vergemeinschaftung und Anarchie. Zur Konzeption und Wahrnehmung polisübergreifender Beziehungen in klassischer Zeit JF - Klio N2 - Der Artikel fragt zunächst nach Konzepten, die in klassischer Zeit von Außenpolitik existierten. Überlegungen zu diesem Thema sind in den antiken philosophischen Schriften greifbar, wobei Vorstellungen von der Funktionsweise des Oikos und der Polis auf den griechischen Raum übertragen wurden. Ähnliche Kategorien, um polisübergreifende Beziehungen zu beschreiben, griff die politische Rhetorik auf. Bezogen sich antike Autoren jedoch in allgemeinen Abhandlungen auf die Außenpolitik, wurde der Krieg als bestimmendes Element identifiziert. Das theoretische Konzept von Außenpolitik konnte demnach für die Zeitgenossen in der Praxis wenig Wirkung entfalten. Ursachen hierfür waren sowohl die unsteten Verhältnisse des 4. Jahrhunderts als auch die konkrete Konzeption der Außenpolitik, da die Interaktion im griechischen Raum anders funktionierte als in kleineren sozialen Einheiten. Zudem wurden real existierende Mechanismen zur Befriedung von Hellas nur unzureichend in die Konzeption integriert. N2 - This paper explores Classical Greek concepts of what today is understood as foreign policy. In philosophical treatises, the matter is mainly conceived by transferring the idea of how oikos and polis functioned onto the field of inter-state relations. Similar notions were employed by political rhetoric to describe interaction between poleis. Yet, whenever literature makes reference to foreign policy in more general considerations, warfare is identified as the decisive element. In practice, the theoretical concept of foreign policy therefore could not be brought to any considerable effect. The causes for this lay in the unsteady conditions of the 4th century as well as in the very concept itself, because the interaction in the Greek world in its entirety worked differently from the interaction in smaller social units. Further, the existing modes of pacifying Hellas only played an insuffient part in the concept. KW - griechische Antike KW - klassische Zeit KW - polisübergreifende Beziehungen KW - antike Wahrnehmungsmuster Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193997 SN - 2192-7669 SN - 0075-6334 N1 - Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich. VL - 97 IS - 1 SP - 32-58 ER - TY - JOUR A1 - Tornau, Christian T1 - Tobias Uhle, Augustin und die Dialektik. Eine Untersuchung der Argumentationsstruktur in den Cassiciacum-Dialogen, Studien und Texte zu Antike und Christentum 67, Tübingen (Mohr Siebeck) 2012, XIV + 293 S., ISBN 978-3-16-151985-7 JF - Zeitschrift für Antikes Christentum / Journal of Ancient Christianity N2 - Rezension zu Tobias Uhle, Augustin und die Dialektik. Eine Untersuchung der Argumentationsstruktur in den Cassiciacum-Dialogen, Studien und Texte zu Antike und Christentum 67, Tübingen (Mohr Siebeck) 2012, XIV + 293 S., ISBN 978-3-16-151985-7 KW - Rezension KW - Augustin KW - Dialektik Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-195571 SN - 1612-961X SN - 0949-9571 N1 - Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich. VL - 18 IS - 3 SP - 509 EP - 559 ER - TY - JOUR A1 - Dannecker, Christoph T1 - Der nemo tenetur-Grundsatz – prozessuale Fundierung und Geltung für juristische Personen JF - Zeitschrift für die gesamte Strafrechtswissenschaft N2 - Kein Abstract verfügbar. KW - nemo tenetur-Grundsatz Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-195368 SN - 1612-703X SN - 0084-5310 N1 - Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich. VL - 127 IS - 2 ER - TY - THES A1 - Ames, Christopher T1 - Molecular Beam Epitaxy of 2D and 3D HgTe, a Topological Insulator T1 - Molekularstrahlepitaxie von 2D und 3D HgTe, ein topologischer Isolator N2 - In the present thesis the MBE growth and sample characterization of HgTe structures is investigated and discussed. Due to the first experimental discovery of the quantum Spin Hall effect (QSHE) in HgTe quantum wells, this material system attains a huge interest in the spintronics society. Because of the long history of growing Hg-based heterostructures here at the Experimentelle Physik III in Würzburg, there are very good requirements to analyze this material system more precisely and in new directions. Since in former days only doped HgTe quantum wells were grown, this thesis deals with the MBE growth in the (001) direction of undoped HgTe quantum wells, surface located quantum wells and three dimensional bulk layers. All Hg-based layers were grown on CdTe substrates which generate strain in the layer stack and provide therefore new physical effects. In the same time, the (001) CdTe growth was investigated on n-doped (001) GaAs:Si because the Japanese supplier of CdTe substrates had a supply bottleneck due to the Tohoku earthquake and its aftermath in 2011. After a short introduction of the material system, the experimental techniques were demonstrated and explained explicitly. After that, the experimental part of this thesis is displayed. So, the investigation of the (001) CdTe growth on (001) GaAs:Si is discussed in chapter 4. Firstly, the surface preparation of GaAs:Si by oxide desorption is explored and analyzed. Here, rapid thermal desorption of the GaAs oxide with following cool down in Zn atmosphere provides the best results for the CdTe due to small holes at the surface, while e.g. an atomic flat GaAs buffer deteriorates the CdTe growth quality. The following ZnTe layer supplies the (001) growth direction of the CdTe and exhibits best end results of the CdTe for 30 seconds growth time at a flux ratio of Zn/Te ~ 1/1.2. Without this ZnTe layer, CdTe will grow in the (111) direction. However, the main investigation is here the optimization of the MBE growth of CdTe. The substrate temperature, Cd/Te flux ratio and the growth time has to be adjusted systematically. Therefore, a complex growth process is developed and established. This optimized CdTe growth process results in a RMS roughness of around 2.5 nm and a FWHM value of the HRXRD w-scan of 150 arcsec. Compared to the literature, there is no lower FWHM value traceable for this growth direction. Furthermore, etch pit density measurements show that the surface crystallinity is matchable with the commercial CdTe substrates (around 1x10^4 cm^(-2)). However, this whole process is not completely perfect and offers still room for improvements. The growth of undoped HgTe quantum wells was also a new direction in research in contrast to the previous n-doped grown HgTe quantum wells. Here in chapter 5, the goal of very low carrier densities was achieved and therefore it is now possible to do transport experiments in the n - and p - region by tuning the gate voltage. To achieve this high sample quality, very precise growth of symmetric HgTe QWs and their HRXRD characterization is examined. Here, the quantum well thickness can now determined accurate to under 0.3 nm. Furthermore, the transport analysis of different quantum well thicknesses shows that the carrier density and mobility increase with rising HgTe layer thickness. However, it is found out that the band gap of the HgTe QW closes indirectly at a thickness of 11.6 nm. This is caused by the tensile strained growth on CdTe substrates. Moreover, surface quantum wells are studied. These quantum wells exhibit no or a very thin HgCdTe cap. Though, oxidization and contamination of the surface reduces here the carrier mobility immensely and a HgCdTe layer of around 5 nm provides the pleasing results for transport experiments with superconductors connected to the topological insulator [119]. A completely new achievement is the realization of MBE growth of HgTe quantum wells on CdTe/GaAs:Si substrates. This is attended by the optimization of the CdTe growth on GaAs:Si. It exposes that HgTe quantum wells grown in-situ on optimized CdTe/GaAs:Si show very nice transport data with clear Hall plateaus, SdH oscillations, low carrier densities and carrier mobilities up to 500 000 cm^2/Vs. Furthermore, a new oxide etching process is developed and analyzed which should serve as an alternative to the standard HCl process which generates volcano defects at some time. However, during the testing time the result does not differ in Nomarski, HRXRD, AFM and transport measurements. Here, long-time tests or etching and mounting in nitrogen atmosphere may provide new elaborate results. The main focus of this thesis is on the MBE growth and standard characterization of HgTe bulk layers and is discussed in chapter 6. Due to the tensile strained growth on lattice mismatched CdTe, HgTe bulk opens up a band gap of around 22 meV at the G-point and exhibits therefore its topological surface states. The analysis of surface condition, roughness, crystalline quality, carrier density and mobility via Nomarski, AFM, XPS, HRXRD and transport measurements is therefore included in this work. Layer thickness dependence of carrier density and mobility is identified for bulk layer grown directly on CdTe substrates. So, there is no clear correlation visible between HgTe layer thickness and carrier density or mobility. So, the carrier density is almost constant around 1x10^11 cm^(-2) at 0 V gate voltage. The carrier mobility of these bulk samples however scatters between 5 000 and 60 000 cm^2/Vs almost randomly. Further experiments should be made for a clearer understanding and therefore the avoidance of unusable bad samples.But, other topological insulator materials show much higher carrier densities and lower mobility values. For example, Bi2Se3 exhibits just density values around 1019 cm^(-2) and mobility values clearly below 5000 cm2/Vs. The carrier density however depends much on lithography and surface treatment after growth. Furthermore, the relaxation behavior and critical thickness of HgTe grown on CdTe is determined and is in very good agreement with theoretical prediction (d_c = 155 nm). The embedding of the HgTe bulk layer between HgCdTe layers created a further huge improvement. Similar to the quantum well structures the carrier mobility increases immensely while the carrier density levels at around 1x10^11 cm^(-2) at 0 V gate voltage as well. Additionally, the relaxation behavior and critical thickness of these barrier layers has to be determined. HgCdTe grown on commercial CdTe shows a behavior as predicted except the critical thickness which is slightly higher than expected (d_c = 850 nm). Otherwise, the relaxation of HgCdTe grown on CdTe/GaAs:Si occurs in two parts. The layer is fully strained up to 250 nm. Between 250 nm and 725 nm the HgCdTe film starts to relax randomly up to 10 %. The relaxation behavior for thicknesses larger than 725 nm occurs than linearly to the inverse layer thickness. A explanation is given due to rough interface conditions and crystalline defects of the CdTe/GaAs:Si compared to the commercial CdTe substrate. HRXRD and AFM data support this statement. Another point is that the HgCdTe barriers protect the active HgTe layer and because of the high carrier mobilities the Hall measurements provide new transport data which have to be interpreted more in detail in the future. In addition, HgTe bulk samples show very interesting transport data by gating the sample from the top and the back. It is now possible to manipulate the carrier densities of the top and bottom surface states almost separately. The back gate consisting of the n-doped GaAs substrate and the thick insulating CdTe buffer can tune the carrier density for Delta(n) ~ 3x10^11 cm^(-2). This is sufficient to tune the Fermi energy from the p-type into the n-type region [138]. In this thesis it is shown that strained HgTe bulk layers exhibit superior transport data by embedding between HgCdTe barrier layers. The n-doped GaAs can here serve as a back gate. Furthermore, MBE growth of high crystalline, undoped HgTe quantum wells shows also new and extended transport output. Finally, it is notable that due to the investigated CdTe growth on GaAs the Hg-based heterostructure MBE growth is partially independent from commercial suppliers. N2 - In der vorliegenden Dissertation wurde das MBE-Wachstum von HgTe Strukturen erforscht und die anschließende Probencharakterisierung durchgeführt und diskutiert. Durch die erste experimentelle Entdeckung des Quanten-Spin-Hall-Effekts (QSHE) in HgTe Quantentrögen hat dieses Materialsystem großes Interesse im Gebiet der Spintronics erfahren. Aufgrund der langen Wachstumshistorie von quecksilberbasierenden Heterostrukturen am Lehrstuhl Experimentelle Physik III der Universität Würzburg sind die Voraussetzungen ausgesprochen gut, um dieses Materialsystem sehr ausführlich und auch in neue Richtungen hin zu untersuchen. Da vor dieser Doktorarbeit fast ausschließlich dotierte HgTe Quantentröge auf verschiedenen Substratorientierungen gewachsen wurden, beschäftigte sich diese Dissertation nun mit dem MBE-Wachstum von undotierten HgTe Quantentrögen, oberflächennahen Quantentrögen und dreidimensionalen Volumenkristallen. Alle quecksilberbasierenden Schichten wurden hierzu auf CdTe Substraten gewachsen, welche tensile Verspannung in den Schichten erzeugten und lieferten daher neue physikalische Effekte. In der selben Zeit wurde weiterhin das Wachstum von (001) CdTe auf n-dotiertem (001) GaAs:Si erforscht, da der japanische Zulieferer der CdTe Substrate eine Lieferengpass hatte aufgrund des Tohoku Erdbebens und seinen verheerenden Folgen im Jahr 2011. Die Erforschung des MBE-Wachstums von (001) CdTe auf (001) GaAs:Si wird im Kapitel 4 behandelt. Zuerst wurde hier die Oberflächenvorbereitung des GaAs:Si Substrates durch thermische Desorption untersucht und ausgewertet. Es stellte sich heraus, dass schnelle, thermische Desorption des GaAs - Oxides mit anschließendem Abkühlen in Zn Atmosphäre die besten Ergebnisse für das spätere CdTe durch kleine Löcher an der Oberfläche liefert, während zum Beispiel ein glatter GaAs Puffer das CdTe Wachstum verschlechtert. Der folgende ZnTe Film verschafft die gewünschte (001) Wachstumsrichtung für CdTe und weist bei 30 Sekunden Wachstumszeit bei einem Flussverhältnis von Zn/Te ~ 1/1.2 die besten Endergebnisse für CdTe auf. Jedoch war die Haupterneuerung hier die Optimierung des CdTe Wachstums. Dafür wurde ein komplexer Wachstumsprozess entwickelt und etabliert. Dieser optimierte CdTe Wachstumsprozess lieferte Ergebnisse von einer RMS Rauigkeit von ungefähr 2.5 nm und FWHMWerte der HRXRD w-Scans von 150 arcsec. Die Defektätzdichte-Messung zeigte weiterhin, dass die Oberflächenkristallinität vergleichbar mit kommerziell erwerbbaren CdTe Substraten ist (um 1x10^4 cm^(-2)). Des Weiteren ist kein niedrigerer Wert für die Halbwertsbreite des w-Scans in der Literatur für diese Wachstumsrichtung aufgeführt. Dies spiricht ebenfalls für die hohe Qualität der Schichten. Jedoch ist dieser Wachstumsprozess noch nicht endgültig ausgereift und bietet weiterhin noch Platz für Verbesserungen. Das Wachstum von undotierten HgTe Quantentrögen war ebenso eine neue Forschungsrichtung im Gegensatz zu den dotierten HgTe Quantentrögen, die in der Vergangenheit gewachsen wurden. Das Ziel hierbei, die Ladungsträgerdichte zu verringern, wurde erreicht und daher ist es nun möglich, Transportexperimente sowohl im n- als auch im p-Regime durchzuführen, indem eine Gatespannung angelegt wird. Des Weiteren experimentierten andere Arbeitsgruppen mit diesen Quantentrögen, bei denen die Fermi Energie in der Bandlücke liegt [143]. Außerdem wurde das sehr präzise MBE Wachstum anhand von symmetrischen HgTe Quantentrögen und ihren HRXRD Charakterisierungen behandelt. Daher kann nun die Quantentrogdicke präzise auf 0,3 nm angegeben werden. Die Transportergebnisse von verschieden dicken Quantentrögen zeigten, dass die Ladungsträgerdichte und Beweglichkeit mit steigender HgTe Schichtdicke zunimmt. Jedoch wurde auch herausgefunden, dass sich die Bandlücke von HgTe Quantentrögen indirekt bei einer Dicke von 11.6 nm schließt. Dies wird durch das verspannte Wachstum auf CdTe Substraten verursacht. Überdies wurden oberflächennahe Quantentröge untersucht. Diese Quantentröge besitzen keine oder nur eine sehr dünne HgCdTe Deckschicht. Allerdings verringerte Oxidation und Oberflächenverschmutzung hier die Ladungsträgerbeweglichkeit dramatisch und eine HgCdTe Schicht von ungefähr 5 nm lieferte ansprechende Transportergebnisse für Supraleiter, die den topologischen Isolator kontaktieren. Eine komplett neue Errungenschaft war die Realisierung, via MBE, HgTe Quantentröge auf CdTe/GaAs:Si Substrate zu wachsen. Dies ging einher mit der Optimierung des CdTe Wachstums auf GaAs:Si. Es zeigte sich, dass HgTe Quantentröge, die in-situ auf optimierten CdTe/GaAs:Si gewachsen wurden, sehr schöne Transportergebnisse mit deutlichen Hall Quantisierungen, SdH Oszillationen, niedrigen Ladungsträgerdichten und Beweglichkeiten bis zu 500 000 cm^2/Vs erreichen. Des Weiteren wurde ein neues Oxidätzverfahren entwickelt und untersucht, welches als Alternative zum Standard-HCl-Prozess dienen sollte, da dieses manchmal vulkan-artige Defekte hervorruft. Jedoch ergab sich kein Unterschied in den Nomarski, HRXRD, AFM und Transportexperimenten. Hier könnten vielleicht Langzeittests oder Ätzen und Befestigen in Stickstoffatmosphäre neue, gewinnbringende Ergbnisse aufzeigen. Der Hauptfokus dieser Doktorarbeit lag auf dem MBE Wachstum und der Standardcharakterisierung von HgTe Volumenkristallen und wurde in Kapitel 6 diskutiert. Durch das tensil verpannte Wachstum auf CdTe entsteht für HgTe als Volumenkristall eine Bandlücke von ungefähr 22 meV am G Punkt und zeigt somit seine topologischen Oberflächenzustände. Die Analyse der Oberfächenbeschaffenheit, der Rauigkeit, der kristallinen Qualität, der Ladungsdrägerdichte und Beweglichkeit mit Hilfe von Nomarski, AFM, XPS, HRXRD und Transportmessungen ist in dieser Arbeit anzutreffen. Außerdem wurde die Schichtdickenabhängigkeit von Ladungsträgerdichte und Beweglichkeit von HgTe Volumenkristallen, die direkt auf CdTe Substraten gewachsen wurden, ermittelt worden. So erhöhte sich durchschnittlich die Dichte und Beweglichkeit mit zunehmender HgTe Schichtdicke, aber die Beweglichkeit ging selten über μ ~ 40 000 cm^2/Vs hinaus. Die Ladungsträgerdichte n hing jedoch sehr von der Litographie und der Behandlung der Oberfläche nach dem Wachstum ab. Des Weiteren wurde das Relaxationsverhalten und die kritische Dicke bestimmt, welches sehr gut mit den theoretischen Vorhersagen übereinstimmt (dc = 155 nm). Das Einbetten des HgTe Volumenkristalls in HgCdTe Schichten brachte eine weitere große Verbesserung mit sich. Ähnlich wie bei den Quantentrögen erhörte sich die Beweglichkeit μ immens, während sich die Ladungsträgerdichte bei ungefähr 1x10^11 cm^(-2) einpendelte. Zusätzlich wurde auch hier das Relaxationsverhalten und die kritische Schichtdicke dieser Barrierenschichten ermittelt. HgCdTe, gewachsen auf kommerziellen CdTe Substraten, zeigte ein Verhalten ähnlich zu dem Erwarteten mit der Ausnahme, dass die kritische Schichtdicke leicht höher ist als die Vorhergesagte (dc = 850 nm). Auf der anderen Seite findet die Relaxation von HgCdTe auf CdTe/GaAs:Si zweigeteilt ab. Bis 250 nm ist die Schicht noch voll verspannt. Zwischen 250 nm und 725 nm beginnt die HgCdTe Schicht willkürlich bis zu 10 % zu relaxieren. Das Relaxationsverhalten für Dicken über 725 nm findet dann wieder linear zur invers aufgetragenen Schichtdicke statt. Eine Erklärung wurde durch das raue Interface der Schichten und der Defekte im Kristall von CdTe/GaAs:Si gegeben, im Vergleich zu den kommerziellen CdTe Substraten. HRXRD und AFM Ergebnisse belegten diese Aussage. Die HgCdTe Barrieren schützen die aktive HgTe Schicht und daher liegen nach Hall Messungen aufgrund der hohen Ladungsträgerbeweglichkeiten neue Transportergbnisse vor, welche in der Zukunft ausführlicher interpretiert werden müssen. Darüber hinaus zeigten HgTe Volumenkristalle neue, interessante Transportergebnisse durch das gleichzeitige Benutzen eines Top- und Backgates. Es ist nun möglich, die Ladungsträger der oberen und unteren Oberflächenzustände nahezu getrennt zu verändern und zu ermitteln. Das Backgate, bestehend aus dem n-dotierten GaAs:Si Substrate und dem dicken isolierenden CdTe Puffer, kann die Ladungsträgerdichte um ungefähr Delta(n) ~ 3x10^11 cm^(-2) varieren. Das ist ausreichend, um die Fermi Energie vom p- in den n-Bereich einzustellen [138]. In dieser Dissertation wurde also gezeigt, dass verspannte HgTe Volumenkristalle durch das Einbetten in HgCdTe Barrieren neue Transportergebnisse liefern. Das n-dotierte GaAs konnte hierbei als Backgate genutzt werden. Des Weiteren zeigte das MBE Wachstum von hochkristallinen , undotiereten HgTe Quantentrögen ebenso neue und erweiterte Transportergebnisse. Zuletzt ist es bemerkenswert, dass durch das erforschte CdTe Wachstum auf GaAs das MBE Wachstum von quecksilberbasierenden Heterostrukturen auf CdTe Substraten teilweise unabhänigig ist von kommerziellen Zulieferbetrieben. KW - Quecksilbertellurid KW - Topologischer Isolator KW - MBE KW - HgTe KW - topological insulator KW - Molekularstrahlepitaxie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151136 ER - TY - JOUR A1 - Sonnenberg, Christoph A1 - Bannert, Maria T1 - Discovering the Effects of Metacognitive Prompts on the Sequential Structure of SRL-Processes Using Process Mining Techniques JF - Journal of Learning Analystics N2 - According to research examining self‐regulated learning (SRL), we regard individual regulation as a specific sequence of regulatory activities. Ideally, students perform various learning activities, such as analyzing, monitoring, and evaluating cognitive and motivational aspects during learning. Metacognitive prompts can foster SRL by inducing regulatory activities, which, in turn, improve the learning outcome. However, the specific effects of metacognitive support on the dynamic characteristics of SRL are not understood. Therefore, the aim of our study was to analyze the effects of metacognitive prompts on learning processes and outcomes during a computer‐based learning task. Participants of the experimental group (EG, n=35) were supported by metacognitive prompts, whereas participants of the control group (CG, n=35) received no support. Data regarding learning processes were obtained by concurrent think‐aloud protocols. The EG exhibited significantly more metacognitive learning events than did the CG. Furthermore, these regulatory activities correspond positively with learning outcomes. Process mining techniques were used to analyze sequential patterns. Our findings indicate differences in the process models of the EG and CG and demonstrate the added value of taking the order of learning activities into account by discovering regulatory patterns. KW - HeuristicsMiner algorithm KW - self‐regulated learning KW - metacognitive prompting KW - process analysis KW - process mining KW - think‐aloud data Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-152362 UR - http://learning-analytics.info/journals/index.php/JLA/article/view/4090 SN - 1929‐7750 N1 - Dieser Artikel ist auch Bestandteil der Dissertation: Sonnenberg, Christoph: Analyzing Technology-Enhanced Learning Processes: What Can Process Mining Techniques Contribute to the Evaluation of Instructional Support?. - Würzburg, Univ., Diss., 2017. - [online]. URN: urn:nbn:de:bvb:20-opus-152354 VL - 2 IS - 1 ER - TY - JOUR A1 - Schilbach, Karin A1 - Alkhaled, Mohammed A1 - Welker, Christian A1 - Eckert, Franziska A1 - Blank, Gregor A1 - Ziegler, Hendrik A1 - Sterk, Marco A1 - Müller, Friederike A1 - Sonntag, Katja A1 - Wieder, Thomas A1 - Braumüller, Heidi A1 - Schmitt, Julia A1 - Eyrich, Matthias A1 - Schleicher, Sabine A1 - Seitz, Christian A1 - Erbacher, Annika A1 - Pichler, Bernd J. A1 - Müller, Hartmut A1 - Tighe, Robert A1 - Lim, Annick A1 - Gillies, Stephen D. A1 - Strittmatter, Wolfgang A1 - Röcken, Martin A1 - Handgretinger, Rupert T1 - Cancer-targeted IL-12 controls human rhabdomyosarcoma by senescence induction and myogenic differentiation JF - OncoImmunology N2 - Stimulating the immune system to attack cancer is a promising approach, even for the control of advanced cancers. Several cytokines that promote interferon-γ-dominated immune responses show antitumor activity, with interleukin 12 (IL-12) being of major importance. Here, we used an antibody-IL-12 fusion protein (NHS-IL12) that binds histones of necrotic cells to treat human sarcoma in humanized mice. Following sarcoma engraftment, NHS-IL12 therapy was combined with either engineered IL-7 (FcIL-7) or IL-2 (IL-2MAB602) for continuous cytokine bioavailability. NHS-IL12 strongly induced innate and adaptive antitumor immunity when combined with IL-7 or IL-2. NHS-IL12 therapy significantly improved survival of sarcoma-bearing mice and caused long-term remissions when combined with IL-2. NHS-IL12 induced pronounced cancer cell senescence, as documented by strong expression of senescence-associated p16\(^{INK4a}\) and nuclear translocation of p-HP1γ, and permanent arrest of cancer cell proliferation. In addition, this cancer immunotherapy initiated the induction of myogenic differentiation, further promoting the hypothesis that efficient antitumor immunity includes mechanisms different from cytotoxicity for efficient cancer control in vivo. KW - TH17 cells KW - cancer-targeted IL-12 KW - differentiation KW - humanized mice KW - immunocytokine KW - immunotherapy KW - M1/M2 macrophages KW - rhabdomyosarcoma KW - TH1-induced senescence KW - tumor-infiltrating lymphocytes Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154579 VL - 4 IS - 7 ER - TY - JOUR A1 - Gutknecht, Lise A1 - Popp, Sandy A1 - Waider, Jonas A1 - Sommerlandt, Frank M. J. A1 - Göppner, Corinna A1 - Post, Antonia A1 - Reif, Andreas A1 - van den Hove, Daniel A1 - Strekalova, Tatyana A1 - Schmitt, Angelika A1 - Colaςo, Maria B. N. A1 - Sommer, Claudia A1 - Palme, Rupert A1 - Lesch, Klaus-Peter T1 - Interaction of brain 5-HT synthesis deficiency, chronic stress and sex differentially impact emotional behavior in Tph2 knockout mice JF - Psychopharmacology N2 - Rationale While brain serotonin (5-HT) function is implicated in gene-by-environment interaction (GxE) impacting the vulnerability-resilience continuum in neuropsychiatric disorders, it remains elusive how the interplay of altered 5-HT synthesis and environmental stressors is linked to failure in emotion regulation. Objective Here, we investigated the effect of constitutively impaired 5-HT synthesis on behavioral and neuroendocrine responses to unpredictable chronic mild stress (CMS) using a mouse model of brain 5-HT deficiency resulting from targeted inactivation of the tryptophan hydroxylase-2 (Tph2) gene. Results Locomotor activity and anxiety- and depression-like behavior as well as conditioned fear responses were differentially affected by Tph2 genotype, sex, and CMS. Tph2 null mutants (Tph2\(^{−/−}\)) displayed increased general metabolism, marginally reduced anxiety- and depression-like behavior but strikingly increased conditioned fear responses. Behavioral modifications were associated with sex-specific hypothalamic-pituitary-adrenocortical (HPA) system alterations as indicated by plasma corticosterone and fecal corticosterone metabolite concentrations. Tph2\(^{−/−}\) males displayed increased impulsivity and high aggressiveness. Tph2\(^{−/−}\) females displayed greater emotional reactivity to aversive conditions as reflected by changes in behaviors at baseline including increased freezing and decreased locomotion in novel environments. However, both Tph2\(^{−/−}\) male and female mice were resilient to CMS-induced hyperlocomotion, while CMS intensified conditioned fear responses in a GxE-dependent manner. Conclusions Our results indicate that 5-HT mediates behavioral responses to environmental adversity by facilitating the encoding of stress effects leading to increased vulnerability for negative emotionality. KW - Serotonin KW - Tryptophan hydroxylase-2 (Tph2) KW - chronic stress KW - gene-by-environment interaction KW - anxiety KW - fear KW - depression KW - aggression Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154586 VL - 232 SP - 2429 EP - 2441 ER - TY - JOUR A1 - Schamel, Johannes T1 - Ableitung von Präferenzen aus GPS-Trajektorien bei landschaftsbezogenen Erholungsaktivitäten JF - AGIT - Journal für Angewandte Geoinformatik N2 - No abstract available. KW - GPS-Tracking KW - Erholungsplanung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153590 VL - 2015 IS - 1 ER - TY - JOUR A1 - Zaho, Huaying A1 - Ghirlando, Rodolfo A1 - Alfonso, Carlos A1 - Arisaka, Fumio A1 - Attali, Ilan A1 - Bain, David L. A1 - Bakhtina, Marina M. A1 - Becker, Donald F. A1 - Bedwell, Gregory J. A1 - Bekdemir, Ahmet A1 - Besong, Tabot M. D. A1 - Birck, Catherine A1 - Brautigam, Chad A. A1 - Brennerman, William A1 - Byron, Olwyn A1 - Bzowska, Agnieszka A1 - Chaires, Jonathan B. A1 - Chaton, Catherine T. A1 - Coelfen, Helmbut A1 - Connaghan, Keith D. A1 - Crowley, Kimberly A. A1 - Curth, Ute A1 - Daviter, Tina A1 - Dean, William L. A1 - Diez, Ana I. A1 - Ebel, Christine A1 - Eckert, Debra M. A1 - Eisele, Leslie E. A1 - Eisenstein, Edward A1 - England, Patrick A1 - Escalante, Carlos A1 - Fagan, Jeffrey A. A1 - Fairman, Robert A1 - Finn, Ron M. A1 - Fischle, Wolfgang A1 - Garcia de la Torre, Jose A1 - Gor, Jayesh A1 - Gustafsson, Henning A1 - Hall, Damien A1 - Harding, Stephen E. A1 - Hernandez Cifre, Jose G. A1 - Herr, Andrew B. A1 - Howell, Elizabeth E. A1 - Isaac, Richard S. A1 - Jao, Shu-Chuan A1 - Jose, Davis A1 - Kim, Soon-Jong A1 - Kokona, Bashkim A1 - Kornblatt, Jack A. A1 - Kosek, Dalibor A1 - Krayukhina, Elena A1 - Krzizike, Daniel A1 - Kusznir, Eric A. A1 - Kwon, Hyewon A1 - Larson, Adam A1 - Laue, Thomas M. A1 - Le Roy, Aline A1 - Leech, Andrew P. A1 - Lilie, Hauke A1 - Luger, Karolin A1 - Luque-Ortega, Juan R. A1 - Ma, Jia A1 - May, Carrie A. A1 - Maynard, Ernest L. A1 - Modrak-Wojcik, Anna A1 - Mok, Yee-Foong A1 - Mücke, Norbert A1 - Nagel-Steger, Luitgard A1 - Narlikar, Geeta J. A1 - Noda, Masanori A1 - Nourse, Amanda A1 - Obsil, Thomas A1 - Park, Chad K A1 - Park, Jin-Ku A1 - Pawelek, Peter D. A1 - Perdue, Erby E. A1 - Perkins, Stephen J. A1 - Perugini, Matthew A. A1 - Peterson, Craig L. A1 - Peverelli, Martin G. A1 - Piszczek, Grzegorz A1 - Prag, Gali A1 - Prevelige, Peter E. A1 - Raynal, Bertrand D. E. A1 - Rezabkova, Lenka A1 - Richter, Klaus A1 - Ringel, Alison E. A1 - Rosenberg, Rose A1 - Rowe, Arthur J. A1 - Rufer, Arne C. A1 - Scott, David J. A1 - Seravalli, Javier G. A1 - Solovyova, Alexandra S. A1 - Song, Renjie A1 - Staunton, David A1 - Stoddard, Caitlin A1 - Stott, Katherine A1 - Strauss, Holder M. A1 - Streicher, Werner W. A1 - Sumida, John P. A1 - Swygert, Sarah G. A1 - Szczepanowski, Roman H. A1 - Tessmer, Ingrid A1 - Toth, Ronald T. A1 - Tripathy, Ashutosh A1 - Uchiyama, Susumu A1 - Uebel, Stephan F. W. A1 - Unzai, Satoru A1 - Gruber, Anna Vitlin A1 - von Hippel, Peter H. A1 - Wandrey, Christine A1 - Wang, Szu-Huan A1 - Weitzel, Steven E A1 - Wielgus-Kutrowska, Beata A1 - Wolberger, Cynthia A1 - Wolff, Martin A1 - Wright, Edward A1 - Wu, Yu-Sung A1 - Wubben, Jacinta M. A1 - Schuck, Peter T1 - A Multilaboratory Comparison of Calibration Accuracy and the Performance of External References in Analytical Ultracentrifugation JF - PLoS ONE N2 - Analytical ultracentrifugation (AUC) is a first principles based method to determine absolute sedimentation coefficients and buoyant molar masses of macromolecules and their complexes, reporting on their size and shape in free solution. The purpose of this multi-laboratory study was to establish the precision and accuracy of basic data dimensions in AUC and validate previously proposed calibration techniques. Three kits of AUC cell assemblies containing radial and temperature calibration tools and a bovine serum albumin (BSA) reference sample were shared among 67 laboratories, generating 129 comprehensive data sets. These allowed for an assessment of many parameters of instrument performance, including accuracy of the reported scan time after the start of centrifugation, the accuracy of the temperature calibration, and the accuracy of the radial magnification. The range of sedimentation coefficients obtained for BSA monomer in different instruments and using different optical systems was from 3.655 S to 4.949 S, with a mean and standard deviation of (4.304\(\pm\)0.188) S (4.4%). After the combined application of correction factors derived from the external calibration references for elapsed time, scan velocity, temperature, and radial magnification, the range of s-values was reduced 7-fold with a mean of 4.325 S and a 6-fold reduced standard deviation of \(\pm\)0.030 S (0.7%). In addition, the large data set provided an opportunity to determine the instrument-to-instrument variation of the absolute radial positions reported in the scan files, the precision of photometric or refractometric signal magnitudes, and the precision of the calculated apparent molar mass of BSA monomer and the fraction of BSA dimers. These results highlight the necessity and effectiveness of independent calibration of basic AUC data dimensions for reliable quantitative studies. KW - fluorescence-detected sedimentation KW - size exclusion chromatography KW - field flow fractionation KW - spinco ultracentrifuge KW - aggregation KW - bead models KW - velocity KW - hydrodynamics KW - biopharmaceuticals KW - proteins Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151903 VL - 10 IS - 5 ER - TY - THES A1 - Breuer [geb. Hemberger], Kathrin R. F. T1 - Effiziente 3D Magnetresonanzbildgebung schnell abfallender Signale T1 - Efficient 3D Magnetic Resonance Imaging of fast decaying signals N2 - In der vorliegenden Arbeit wird die Rotated-Cone-UTE-Sequenz (RC-UTE), eine 3D k-Raum-Auslesetechnik mit homogener Verteilung der Abtastdichte, vorgestellt. Diese 3D MR-Messtechnik ermöglicht die für die Detektion von schnell abfallenden Signalen notwendigen kurzen Echozeiten und weist eine höhere SNR-Effizienz als konventionelle radiale Pulssequenzen auf. Die Abtastdichte ist dabei in radialer und azimutaler Richtung angepasst. Simulationen und Messungen in vivo zeigen, dass die radiale Anpassung das T2-Blurring reduziert und die SNR-Effizienz erhöht. Die Drehung der Trajektorie in azimutale Richtung ermöglicht die Reduzierung der Unterabtastung bei gleicher Messzeit bzw. eine Reduzierung der Messzeit ohne Auflösungsverlust. Die RC-UTE-Sequenz wurde erfolgreich für die Bildgebung des Signals des kortikalen Knochens und der Lunge in vivo angewendet. Im Vergleich mit der grundlegenden UTE-Sequenz wurden die Vorteile von RC-UTE in allen Anwendungsbeispielen aufgezeigt. Die transversalen Relaxationszeit T2* des kortikalen Knochen bei einer Feldstärke von 3.0T und der Lunge bei 1.5T und 3.0T wurde in 3D isotroper Auflösung gemessen. Außerdem wurde die Kombination von RC-UTE-Sequenz mit Methoden der Magnetisierungspräparation zur besseren Kontrasterzeugung gezeigt. Dabei wurden die Doppel-Echo-Methode, die Unterdrückung von Komponenten mit langer Relaxationszeit T2 durch Inversionspulse und der Magnetisierungstransfer-Kontrast angewendet. Die Verwendung der RC-UTE-Sequenz für die 3D funktionelle Lungenbildgebung wird ebenfalls vorgestellt. Mit dem Ziel der umfassenden Charakterisierung der Lungenfunktion in 3D wurde die simultane Messung T1-gewichteter Bilder und quantitativer T2*-Karten für verschiedene Atemzustände an sechs Probanden durchgeführt. Mit der hier vorgestellten Methode kann die Lungenfunktion in 3D über T1-Wichtung, quantitative T2*-Messung und Rekonstruktion verschiedener Atemzustände durch Darstellung von Ventilation, Sauerstofftransport und Volumenänderung beurteilt werden. N2 - In this thesis the Rotated-Cone-UTE-sequence (RC-UTE), a 3D k- space sampling scheme with uniform sampling density, is presented. 3D RC-UTE provides short echo times enabling the detection of fast decaying signals with higher SNR-efficiency than conventional UTE sequences. In RC-UTE the sampling density is adapted in radial and azimuthal direction. It is shown in simulations and measurements that the density adaption along the radial dimension reduces T2-blurring. By twisting the trajectory along the azimuthal direction fewer projections are needed to fulfill the Nyquist criterion. Thereby, undersampling artefacts or the measurement time is reduced without loss of resolution. RC-UTE has been successfully applied in vivo in cortical bone and the lung. It was shown that the RC-UTE sequence outperforms the standard UTE sequence in all presented applications. In addition, the transversal relaxation time T2* of cortical bone at field strength of 3.0T and the human lung at 1.5T und 3.0T was measured in 3D isotropic resolution. Moreover, the combination of RC-UTE with magnetization preparation techniques for improved image contrast was shown. To this end strategies such as double-echo readout, long T2 suppression by inversion pulses and magnetization transfer contrast imaging were employed. Furthermore, the application of RC-UTE for 3D functional lung imaging is presented. In order to provide broad information about pulmonary function T1-weighted images and quantitative T2*-maps in different breathing states were simultaneously measured in six healthy volunteers. The presented methodology enables the assessment of pulmonary function in 3D by indicating ventilation, oxygen transfer and lung volume changes during free breathing. KW - Kernspintomografie KW - Relaxationszeit KW - Dreidimensionale Bildverarbeitung KW - T2* KW - Ulrakurze Echozeit KW - T1-Wichtung KW - dichteangepasste k-Raum Abtastung KW - Lunge KW - Relaxation KW - Lungenfunktion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150750 ER - TY - JOUR A1 - Espina, Laura A1 - Pagán, Rafael A1 - López, Daniel A1 - García-Gonzalo, Diego T1 - Individual Constituents from Essential Oils Inhibit Biofilm Mass Production by Multi-Drug Resistant Staphylococcus aureus JF - Molecules N2 - Biofilm formation by Staphylococcus aureus represents a problem in both the medical field and the food industry, because the biofilm structure provides protection to embedded cells and it strongly attaches to surfaces. This circumstance is leading to many research programs seeking new alternatives to control biofilm formation by this pathogen. In this study we show that a potent inhibition of biofilm mass production can be achieved in community-associated methicillin-resistant S. aureus (CA-MRSA) and methicillin-sensitive strains using plant compounds, such as individual constituents (ICs) of essential oils (carvacrol, citral, and (+)-limonene). The Crystal Violet staining technique was used to evaluate biofilm mass formation during 40 h of incubation. Carvacrol is the most effective IC, abrogating biofilm formation in all strains tested, while CA-MRSA was the most sensitive phenotype to any of the ICs tested. Inhibition of planktonic cells by ICs during initial growth stages could partially explain the inhibition of biofilm formation. Overall, our results show the potential of EOs to prevent biofilm formation, especially in strains that exhibit resistance to other antimicrobials. As these compounds are food additives generally recognized as safe, their anti-biofilm properties may lead to important new applications, such as sanitizers, in the food industry or in clinical settings. KW - Listeria monocytogenes KW - carvacrol KW - strains KW - essential oils KW - anti-biofilm KW - bacterial biofilms KW - food industry KW - antibacterial KW - inactivation KW - components KW - citrus KW - biofilms KW - Staphylococcus aureus KW - (+)-limonene KW - citral Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151845 VL - 20 SP - 11357 EP - 11372 ER - TY - JOUR A1 - Sperlich, Paula F. A1 - Holmberg, Hans-Christer A1 - Reed, Jennifer L. A1 - Zinner, Christoph A1 - Mester, Joachim A1 - Sperlich, Billy T1 - Individual versus standardized running protocols in the determination of VO\(_{2max}\) JF - Journal of Sports Science and Medicine N2 - The purpose of this study was to determine whether an individually designed incremental exercise protocol results in greater rates of oxygen uptake VO\(_{2max}\) than standardized testing. Fourteen well-trained, male runners performed five incremental protocols in randomized order to measure their VO\(_{2max}\): i) an incremental test (INC\(_{S+I}\)) with pre-defined increases in speed (2 min at 8.64 km.h\(^{-1}\), then a rise of 1.44 km.h\(^{-1}\) every 30 s up to 14.4 km.h\(^{-1}\)) and thereafter inclination (0.5.every 30 s); ii) an incremental test (INC\(_{I}\)) at constant speed (14.4 km.h\(^{-1}\)) and increasing inclination (2 degrees every 2 min from the initial 0 degrees); iii) an incremental test (INC\(_{S}\)) at constant inclination (0 degrees) and increasing speed (0.5 km.h\(^{-1}\) every 30 s from the initial 12.0 km.h\(^{-1}\)); iv) a graded exercise protocol (GXP) at a 1 degrees incline with increasing speed (initially 8.64 km.h\(^{-1}\) + 1.44 km.h\(^{-1}\) every 5 min); v) an individual exercise protocol (INDXP) in which the runner chose the inclination and speed. VO\(_{2max}\) was lowest (-4.2%) during the GXP (p = 0.01; d = 0.06 - 0.61) compared to all other tests. The highest rating of perceived exertion, heart rate, ventilation and end-exercise blood lactate concentration were similar between the different protocols (p < 0.05). The time to exhaustion ranged from 7 min 18 sec (INC\(_{S}\)) to 25 min 30 sec (GXP) (p = 0.01). The VO\(_{2max}\) attained by employing an individual treadmill protocol does not differ from the values derived from various standardized incremental protocols. KW - maximum oxygen uptake KW - aerobic power KW - treadmill running KW - ramp test KW - treadmill protocol Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151890 VL - 14 ER - TY - INPR A1 - Lambert, Christoph A1 - Völker, Sebastian F. A1 - Koch, Federico A1 - Schmiedel, Alexander A1 - Holzapfel, Marco A1 - Humeniuk, Alexander A1 - Röhr, Merle I. S. A1 - Mitric, Roland A1 - Brixner, Tobias T1 - Energy Transfer Between Squaraine Polymer Sections: From helix to zig-zag and All the Way Back T2 - Journal of the American Chemical Society N2 - Joint experimental and theoretical study of the absorption spectra of squaraine polymers in solution provide evidence that two different conformations are present in solution: a helix and a zig-zag structure. This unique situation allows investigating ultrafast energy transfer processes between different structural segments within a single polymer chain in solution. The understanding of the underlying dynamics is of fundamental importance for the development of novel materials for light-harvesting and optoelectronic applications. We combine here femtosecond transient absorption spectroscopy with time-resolved 2D electronic spectroscopy showing that ultrafast energy transfer within the squaraine polymer chains proceeds from initially excited helix segments to zig-zag segments or vice versa, depending on the solvent as well as on the excitation wavenumber. These observations contrast other conjugated polymers such as MEH-PPV where much slower intrachain energy transfer was reported. The reason for the very fast energy transfer in squaraine polymers is most likely a close matching of the density of states between donor and acceptor polymer segments because of very small reorganization energy in these cyanine-like chromophores. KW - energy transfer dynamics KW - squaraine polymer Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-159607 UR - http://dx.doi.org/10.1021/jacs.5b03644 N1 - This document is the unedited Author's version of a Submitted Work that war subsequently accepted for publication in Journal of the American Chemical Society, copyright American Chemical Society after peer review. To access the final edited and published work see doi:10.1021/jacs.5b03644. ER - TY - THES A1 - Rotem, Elam T1 - Early Basso Continuo Practice: Implicit Evidence in the Music of Emilio de' Cavalieri T1 - Frühe Basso Continuo-Praxis: Implizite Evidenz in der Musik Emilio de' Cavalieris N2 - In this work, Emilio de’ Cavalieri’s musical sources will serve as a platform in an attempt to overcome the lack of explicit original guidance and guidelines of performance practice of early basso continuo. It will offer a methodology that will allow the unraveling of implicit theory and practice hidden in the music sources themselves. The methodology of this work is based on the fact that Cavalieri’s Rappresentatione di Anima e di Corpo (Rome, 1600) is printed using a unique continuo notation, which is detailed, precise, and coherent—more so than any other contemporaneous printed source. Through thorough investigation of this continuo notation, it will be possible to enrich our practical as well as theoretical knowledge of the early basso continuo. A wide range of evidences will emerge, covering a wide spectrum, from general questions of instrumentation up to the very notes that should be played. Using a special notation for illustration, I will demonstrate how Cavalieri’s basso continuo figuration, when combined with the known rules of counterpoint, is at times equivalent to written-out realizations. As part of this study, different models of contrapuntal phenomena will be analyzed, mainly in the context of cadences but also in the context of other progressions that deserve to be recognized as formulas. Their theoretical structure will be uncovered as well as their actual application in music and their manner of execution. The prevalence of each phenomenon will be examined in order to distinguish common and recurrent phenomena from rarely-used formulas. In order to do this, and due to problematic historical terminology, it will be necessary to create a set of new terms inspired by Cavalieri’s notation. Those terms will not be solely relevant to Cavalieri’s music; the models were made flexible so that they may prove useful for future discussions or studies of early continuo in general. Out of the known early basso continuo sources, a “mini-compendium” of practical implications will be extracted in order to exhaust the practical knowledge implicit in them. This endeavor will be concluded with a list of rules and general advice drawn from the sources, but it will also reveal some problematic aspects of these sources. This endeavor will make it possible to compare the “new” implicit practical information deduced in this study with the explicit known continuo sources, and assess to what extant Cavalieri’s continuo practices illuminate and complement the known knowledge from previously-studied yet opaque sources of basso continuo. The focus of this dissertation is on Cavalieri’s music, but the findings proposed here will be traced so as to illuminate the broader realm of the early Baroque and the 17th century musical style at large. Finally, this new research about Cavalieri’s music and continuo, along reevaluating of its place among the common continuo sources, calls for redistribution of source materials on the traditional “shelf” of early basso continuo sources. N2 - Frühe Basso Continuo-Praxis: Implizite Evidenz in der Musik Emilio de' Cavalieris KW - Performance practice KW - Early Music KW - Early Basso Continuo Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-145079 N1 - eine 2., ergänzte Fassung der Arbeit finden Sie unter: http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145696 ER - TY - JOUR A1 - Eden, Lars A1 - Ziegler, Dirk A1 - Gilbert, Fabian A1 - Fehske, Kai A1 - Fenwick, Annabel A1 - Meffert, Rainer H. T1 - Significant pain reduction and improved functional outcome after surgery for displaced midshaft clavicular fractures JF - Journal of Orthopaedic Surgery and Research N2 - Purpose Displaced midshaft clavicular fractures can be treated conservatively as well as operatively by titan elastic nail (TEN) or plate fixation. This survey was performed to evaluate the clinical results of each treatment method and elaborate advantages or possible complications of each modality. Methods Between 2008 and 2013, 102 patients were prospectively included in our study—37 patients for conservative treatment with a rucksack bandage for 4 to 6 weeks, 41 patients for plate osteosynthesis, and 24 for intramedullary stabilization with TEN. Disabilities of the Arm, Shoulder and Hand (DASH), Constant Murley Score (CMS), and visual analog scale (VAS) for pain and function as well as time of invalidity were recorded over a 1-year period. Results The clinical data collected reveals that all three different therapies lead to good or excellent clinical results after 1 year. However, one can observe advantages of operative treatment in comparison to conservative therapy in some characteristics. Conclusion Our data shows that there are several indications where operative treatment has advantages compared to conservative treatment. In special fracture types (Robinson 2B1), TEN gives the best results. Plate fixation is extraordinarily sufficient in pain reduction within the first 5 weeks and indicated in more-part fractures (Robinson 2B2). Nevertheless, conservative treatment is always a good and promising way to treat clavicular fractures, so that individual indications and thorough patient informative talks are inevitable. KW - clavicular fracture KW - TEN KW - AS clavicle plate KW - LCP KW - reconstruction plates Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-146357 VL - 10 IS - 190 ER - TY - THES A1 - Beitzen-Heineke, Antonia T1 - Invariant Natural Killer T cells possess immune-modulating functions during \(Aspergillus\) \(fumigatus\) infection T1 - Invariante Natürliche Killer T Zellen besitzen immunmodulierende Funktionen in der \(Aspergillus\) \(fumigatus\) Abwehr N2 - Aspergillus fumigatus is the most common cause for invasive fungal infections, a disease associated with high mortality in immune-compromised patients. CD1d-restricted invariant Natural Killer T (iNKT) cells compose a small subset of T cells known to impact the immune response towards various infectious pathogens. To investigate the role of human iNKT cells during A. fumigatus infection, we studied their activation as determined by CD69 expression and cytokine production in response to distinct fungal morphotypes in the presence of different CD1d⁺ antigen presenting cells using flow cytometry and multiplex ELISA. Among CD1d⁺ subpopulations, CD1d⁺CD1c⁺ mDCs showed the highest potential to activate iNKT cells on a per cell basis. The presence of A. fumigatus decreased this effect of CD1d⁺CD1c⁺ mDCs on iNKT cells and led to reduced secretion of TNF-α, G-CSF and RANTES. Production of other Th1 and Th2 cytokines was not affected by the fungus, suggesting an immune-modulating function for human iNKT cells during A. fumigatus infection. N2 - Aspergillus fumigatus ist der häufigste Erreger von invasiven Pilzinfektionen, welche bei immunsupprimierten Patienten mit einer hohen Mortalität einhergehen. CD1d-abhängige invariante Natürliche Killer T (iNKT) Zellen sind eine kleine Subpopulation von T-Zellen, die die Immunantwort auf verschiedene Erreger beeinflussen. Um die Rolle von humanen iNKT Zellen in der Aspergillus fumigatus Abwehr zu untersuchen, wurde in Ko-Kulturen mit iNKT Zellen und CD1d⁺ Antigen präsentierenden Zellen in Anwesenheit von verschiedenen fungalen Morphotypen der Aktivierungsmarker CD69 und die Zytokinproduktion mittels Durchflusszytometrie und Multiplex ELISA untersucht. Unter den CD1d⁺ Subpopulationen wiesen die CD1d⁺CD1c⁺mDCs das höchste aktivierende Potential auf iNKT Zellen auf. Die Anwesenheit von A. fumigatus reduzierte diesen Effekt von CD1d⁺CD1c⁺mDCs auf iNKT Zellen und führte zu einer reduzierten Sekretion von TNF-α, G-CSF und RANTES. Die Produktion von anderen Th1 und Th2 Zytokinen war nicht durch den Pilz beeinflusst. Diese Arbeit suggeriert eine immunmodulierende Funktion von humanen iNKT Zellen in der Abwehr von A. fumigatus. KW - Aspergillus fumigatus KW - T Zelle KW - iNKT KW - CD1d KW - CD1c⁺ mDC Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-144966 ER - TY - THES A1 - Kutzer, Pia Elfriede Seyra T1 - Langzeitergebnisse einer steroidfreien Immunsuppression ein Jahr nach Nierentransplantation T1 - Long-term results of a steroid-free immunosuppressive regimen one year after renal transplantation N2 - Die Transplantation nimmt, mehr noch als die verschiedenen Dialyseverfahren, den höchsten Stellenwert in der Therapie eines terminalen Nierenversagens ein. Eine Transplantation erfordert jedoch auch immer eine suffiziente Immunsuppression, ohne die die Funktionalität des Transplantats nicht gewährleistet werden kann. Kortikosteroide werden dabei immer noch sehr häufig nach Nierentransplantation eingesetzt. Jedoch bringt diese Medikation auch Risiken mit sich. In der vorliegenden retrospektiven Analyse wurden die Daten von insgesamt 809 Patienten ausgewertet. Die Patienten wurden in zwei Gruppen aufgeteilt, wobei zwischen steroidfrei und nicht-steroidfrei in Jahr zwei nach Transplantation unterschieden wurde. Untersucht wurde, ob es Unterschiede im Patienten- und Transplantatüberleben, bei akuten Abstoßungen oder bei steroidtypischen Nebenwirkungen gibt. Wir konnten ein tendenziell besseres Patientenüberleben in der steroidfreien Gruppe feststellen, vor allem zu sehen an der Zehn-Jahres-Überlebensrate (86,0% vs. 79,8%). Bezüglich des Transplantatüberlebens zeigte sich ein statistisch signifikanter Unterschied zugunsten der steroidfreien Patienten (nach fünf Jahren 92,2% vs. 79,7%). Ein Transplantatverlust war in der steroidfreien Kohorte seltener zu beobachten (23,1% vs. 33,8%). Bei den in Jahr zwei steroidfreien Patienten ereigneten sich weniger akute Abstoßungsereignisse, sowohl bioptisch gesicherte als auch nur klinisch verdächtige Episoden. Steroidtypische Nebenwirkungen, zum Beispiel ein Posttransplantationsdiabetes sowie kardiovaskuläre Ereignisse wurden tendenziell häufiger in der Kohorte mit fortgesetzter Steroideinnahme diagnostiziert. Im Auftreten von Malignomen gab es keinen Unterschied zwischen den beiden Gruppen. Zu beachten ist die Möglichkeit eines Selektionsbias bei der retrospektiven Auswertung. Somit ergeben sich in unserer Analyse für eine verkürzte Einnahme von Steroiden nach Transplantation greifbare Vorteile für das Patienten- und Transplantatüberleben. Die Steroidtherapie sollte jedoch mindestens bis sechs Monate nach Transplantation beibehalten werden. Nach diesem Zeitraum erscheint das Absetzen der Steroide sicherer zu sein, da akute Abstoßungsepisoden seltener auftreten. Sowohl Patienten- und Transplantatüberleben werden durch das Absetzen der Steroidtherapie günstig beeinflusst. Ein früheres Absetzen, wie es in anderen Studien durchgeführt wurde, führte häufiger zu höheren Raten an akuten Rejektionen. Kortikosteroide waren und bleiben somit ein unverzichtbarer Teil der initialen immunsuppressiven Therapie nach Nierentransplantation. N2 - We analyzed the long-term results of a steroid-free immunosuppressive regimen one year after renal transplantation. In this retrospective analysis 809 patients were included who underwent renal transplantation between 1984 an 2012. The patients were divided into two groups: Patients who continued taking steroids one year after transplantation and patients who were withdrawn from steroids after one year after transplantation. Both groups were matched for baseline parameters. In the steroid withdrawal-group we found lower overall-mortality rates compared to steroid-continuation-patients. Also there were less graft losses in the CSW group. KW - Nierentransplantation KW - Immunsuppression KW - corticosteroid withdrawal KW - corticosteroid-free immunosuppression after renal transplantation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-141586 ER - TY - THES A1 - Schwarz, Christoph Benjamin T1 - Full vector-field control of femtosecond laser pulses with an improved optical design T1 - Vollständige Kontrolle des Vektorfelds von Femtosekunden-Laserpulsen mit einem verbesserten optischen Design N2 - The controlled shaping of ultrashort laser pulses is a powerful technology and applied in many laser laboratories today. Most of the used pulse shapers are only able to produce linearly polarized pulses shaped in amplitude and phase. Some devices are also capable of producing limited time-varying polarization profiles, but they are not able to control the amplitude. However, for some state-of-the-art non-linear time-resolved methods, such as polarization-enhanced two-dimensional spectroscopy, the possibility of controlling the amplitude and the polarization simultaneously is desirable. Over the last years, different concepts have been developed to overcome these restrictions and to manipulate the complete vector-field of an ultrashort laser pulse with independent control over all four degrees of freedom - phase, amplitude, orientation, and ellipticity. The aim of this work was to build such a vector-field shaper. While the basic concept used for our setup is based on previous designs reported in the literature, the goal was to develop an optimized optical design that minimizes artifacts, allowing for the generation of predefined polarization pulse sequences with the highest achievable accuracy. In Chapter 3, different approaches reported in the literature for extended and unrestricted vector-field control were examined and compared in detail. Based on this analysis, we decided to follow the approach of modulating the spectral phase and amplitude of two perpendicularly polarized pulses independently from each other in two arms of an interferometer and recombining them to a single laser pulse to gain control over the complete vector field. As described in Chapter 4, the setup consists of three functional groups: i) an optical component to generate and recombine the two polarized beams, ii) a 4f setup, and iii) a refracting telescope to direct the two beams under two different angles of incidence onto the grating of the 4f setup in a common-path geometry. This geometry was chosen to overcome potential phase instabilities of an interferometric vector-field shaper. Manipulating the two perpendicularly polarized pulses simultaneously within one 4f setup and using adjacent pixel groups of the same liquid-crystal spatial light modulator (LC SLM) for the two polarizations has the advantages that only a single dual-layer LC SLM is required and that a robust and compact setup was achieved. The shaping capabilities of the presented design were optimized by finding the best parameters for the setup through numerical calculations to adjust the frequency distributions for a broad spectrum of 740 – 880 nm. Instead of using a Wollaston prism as in previous designs, a thin-film polarizer (TFP) is utilized to generate and recombine the two orthogonally polarized beams. Artifacts such as angular dispersion and phase distortions along the beam profile which arise when a Wollaston prism is used were discussed. Furthermore, it was shown by ray-tracing simulations that in combination with a telescope and the 4f setup, a significant deformation of the beam profile would be present when using a Wollaston prism since a separation of the incoming and outgoing beam in height is needed. The ray-tracing simulations also showed that most optical aberrations of the setup are canceled out when the incoming and outgoing beams propagate in the exact same plane by inverting the beam paths. This was realized by employing a TFP in the so-called crossed-polarizer arrangement which has also the advantage that the polarization-dependent efficiencies of the TFP and the other optics are automatically compensated and that a high extinction ratio in the order of 15000:1 is reached. Chromatic aberrations are, however, not compensated by the crossed-polarizer arrangement. The ray-tracing simulations confirmed that these chromatic aberrations are mainly caused by the telescope and not by the cylindrical lens of the 4f setup. Nevertheless, in the experimentally used wavelength range of 780 – 816 nm, only minor distortions of the beam profile were observed, which were thus considered to be negligible in the presented setup. The software implementation of the pulse shaper was reviewed in Chapter 5 of this thesis. In order to perform various experiments, five different parameterizations, accounting for the extended shaping capabilities of a vector-field shaper, were developed. The Pixel Basis, the Spectral Basis, and the Spectral Taylor Basis can generally be used in combination with an optimization algorithm and are therefore well suited for quantum control experiments. For multidimensional spectroscopy, the Polarized Four-Pulse Basis was established. With this parameterization pulse sequences with up to four subpulses can be created. The polarization state of each subpulse can be specified and the relative intensity, phase, and temporal delay between consecutive subpulses can be controlled. In addition, different software programs were introduced in Chapter 5 which are required to perform the experiments conducted in this work. The experimental results were presented in Chapter 6. The frequency distribution across the LC SLM was measured proving that the optimal frequency distribution was realized experimentally. Furthermore, the excellent performance of the TFP was verified. In general, satellite pulses are emitted from the TFP due to multiple internal reflections. Various measurements demonstrated that these pulses are temporally separated by at least 4.05 ps from the main pulse and that they have vanishing intensity. The phase stability between the two arms of the presented common-path setup σ = 28.3 mrad (λ/222) over 60 minutes. To further improve this stability over very long measurement times, an on-the-fly phase reduction and stabilization (OPRAS) routine utilizing the pulse shaper itself was developed. This routine automatically produces a compressed pulse with a minimized relative phase between the two polarization components. A phase stability of σ = 31.9 mrad (λ/197) over nearly 24 hours was measured by employing OPRAS. Various pulse sequences exceeding the capabilities of conventional pulse shapers were generated and characterized. The experimental results proved that shaped pulses with arbitrary phase, amplitude, and polarization states can be created. In all cases very high agreement between the target parameters and the experimental data was achieved. For the future use of the setup also possible modifications were suggested. These are not strictly required, but all of them could further improve the performance and flexibility of the setup. Firstly, it was illustrated how a “dual-output” of the setup can be realized. With this modification it would be possible to use the main intensity of the shaped pulse for an experiment while using a small fraction to characterize the pulse or to perform OPRAS simultaneously. Secondly, the basic idea of replacing the telescope by focusing mirrors in order to eliminate the chromatic aberrations was presented. Regarding the different parameterizations for vector-field shaping, some modifications increasing the flexibility of the implemented bases and the realization of a von Neumann Basis for the presented setup were proposed. In future experiments, the vector-field shaper will be used in conjunction with a photoemission electron microscope (PEEM). This approach combines the temporal resolution provided by ultrashort laser pulses with the high spatial resolution gained by electron microscopy in order to perform two-dimensional spectroscopy and coherent control on nanostructures with polarization-shaped femtosecond laser pulses. In combination with other chiral-sensitive experimental setups implemented earlier in our group, the vector-field shaper opens up new perspectives for chiral femtochemistry and chiral control. The designed vector-field shaper meets all requirements to generate high-precision polarization-shaped multipulse sequences. These can be used to perform numerous polarization-sensitive experiments. Employing the OPRAS routine, a quasi-infinitely long phase stability is achieved and complex and elaborated long-term measurements can be carried out. The fact that OPRAS demands no additional hardware and that only a single dual-layer LC SLM and inexpensive optics are required allows the building of a vector-field shaper at comparatively low costs. We hope that with the detailed insights into the optical design process as well as into the software implementation given in this thesis, vector-field shaping will become a standard technique just as conventional pulse shaping in the upcoming years. N2 - Die gezielte Formung ultrakurzer Laserpulse ist eine leistungsstarke Technik, die heutzutage in vielen Laserlaboren eingesetzt wird. Die meisten Pulsformer können jedoch nur linear polarisierte, in Phase und Amplitude geformte Laserpulse erzeugen. Einige Pulsformer können auch sich zeitlich verändernde Polarisationszustände generieren. Die möglichen Polarisationszustände sind allerdings beschränkt und eine gleichzeitige Formung der Amplitude ist dann nicht mehr möglich. Für einige moderne, nicht-lineare, zeitaufgelöste, spektroskopische Methoden, wie z.B. die polarisationsunterstützte zweidimensionale Spektroskopie, ist aber die gleichzeitige Kontrolle über die Polarisation und die Amplitude erstrebenswert. In den letzten Jahren wurden verschiedene Konzepte entwickelt, um diese Beschränkungen zu überwinden und eine vollständige Kontrolle des Vektorfeldes über die vier Freiheitsgrade Phase, Amplitude, Orientierung und Elliptizität eines ultrakurzen Laserpulses zu erlangen. Ziel dieser Arbeit war es, einen solchen Vektorfeldformer zu konstruieren. Die Grundidee für das Design unseres Aufbaus basiert auf verschiedenen literaturbekannten Konzepten. Unser Ziel war es jedoch, ein optimiertes Design zu entwickeln, bei dem Formungsartefakte minimal sind und definierte polarisationsgeformte Mehrfachpulse mit der höchstmöglichen Genauigkeit erzeugt werden können. In Kapitel 3 wurden verschiedene vorherige Ansätze für die erweiterte und vollständige Vektorfeldkontrolle detailliert geprüft und verglichen. Basierend auf dieser Analyse haben wir uns dazu entschlossen, das Konzept eines interferometrischen Vektorfeldformers zu verwenden. Bei diesem werden die spektrale Phase und Amplitude zweier orthogonal polarisierter Pulse unabhängig voneinander in den zwei Armen eines Interferometers manipuliert und durch Überlagerung dieser zwei Pulse die vollständige Kontrolle über das Vektorfeld erlangt. Wie in Kapitel 4 beschrieben, besteht der Aufbau aus drei funktionellen Gruppen: i) einer optischen Komponente, um die zwei polarisierten Strahlen zu erzeugen und zu rekombinieren, ii) einem sog. 4f-Aufbau und iii) einem Linsenteleskop, um die zwei Strahlen unter unterschiedlichen Winkeln auf das Gitter des 4f-Aufbaus zu lenken, so dass beide Strahlen über dieselben Optiken propagieren. Diese Art der Strahlführung wurde gewählt, um die interferometrische Stabilität des Aufbaus zu verbessern. Beide Strahlen werden mit demselben 4f-Aufbau geformt, indem unterschiedliche benachbarte Pixelbereiche des Flüssigkristall-Lichtmodulators (LC SLM, engl. liquid-crystal spatial light modulator) für die zwei Polarisationskomponenten genutzt werden. Das hat den Vorteil, dass nur ein einzelnes zweilagiges LC SLM benötigt wird und so ein kompakter und robuster Aufbau realisiert werden konnte. Um die Frequenzverteilung für einen breiten Spektralbereich von 740 – 880 nm anzupassen, wurden die besten Parameter für den Aufbau anhand numerischer Berechnungen bestimmt, und somit die Formungsmöglichkeiten unseres Vektorfeldformers optimiert. Im Gegensatz zu anderen Designs wird ein Dünnschicht-Polarisator (TFP, engl. thin-film polarizer) anstelle eine Wollaston-Prismas verwendet, um die zwei senkrecht zueinander polarisierten Strahlen zu erzeugen und zu rekombinieren, da ein Wollaston-Prisma Artefakte wie Winkelchirp und eine über das Strahlprofiel variierende Phase verursacht. Bei Verwendung eines Wollaston-Prismas muss zudem der rekombinierte Strahl gegenüber des einfallenden Strahls in der Höhe verkippt werden, um beide räumlich trennen zu können. Raytracing-Simulationen haben gezeigt, dass dies in Kombination mit einem Teleskop und dem 4f-Aufbau zu einer erheblichen Deformierung des Strahlprofiles führt. Diese Simulationen haben auch gezeigt, dass die Abbildungsfehler des Aufbaus weitestgehend aufgehoben werden, wenn der eingehende und ausgehende Strahl in derselben Ebene propagieren und somit die Strahlwege genau invertiert werden. Dies konnte mit Hilfe des TFPs in einer Konfiguration, die gekreuzten Polarisatoren entspricht, realisiert werden. Diese Konfiguration hat zudem den Vorteil, dass dadurch die polarisationsabhängige Effizienz des TFPs und der anderen Optiken automatisch kompensiert wird und ein hohes Auslöschungsverhältnis in der Größenordnung 15000:1 erzielt wird. Die chromatische Aberration wird allerdings durch diese Polarisator-Konfiguration nicht aufgehoben. Durch Raytracing wurde bestätigt, dass diese primär durch das Teleskop verursacht wird und nicht durch die Zylinderlinse des 4f-Aufbaus. Allerdings wurden im experimentell genutzten Wellenlängenbereich von 780 – 816 nm nur geringe Störungen des Strahlprofiles beobachtet, die daher als vernachlässigbar angesehen wurden. Die softwareseitige Umsetzung der Vektorfeldkontrolle wurde in Kapitel 5 beschrieben. Um verschiedene Experimente durchführen zu können, wurden fünf Parametrisierungen entwickelt, bei denen die erweiterten Formungsmöglichkeiten eines Vektorfeldformers berücksichtigt wurden. Die Pixel Basis, die Spectral Basis und die Spectral Taylor Basis können zusammen mit einem Optimierungsalgorithmus verwendet werden und sind damit bestens für Experimente der Quantenkontrolle geeignet. Für die multidimensionale Spektroskopie wurde die Polarized Four-Pulse Basis eingeführt. Mit dieser Parametrisierung können Mehrfach-Pulssequenzen mit bis zu vier Pulsen erzeugt werden. Dabei kann der Polarisationszustand jedes Pulses vorgegeben und die relative Intensität, Phase und der zeitliche Abstand aufeinanderfolgender Pulse festgelegt werden. Zusätzlich wurden in Kapitel 5 verschieden Softwareprogramme vorgestellt, die für die in dieser Arbeit durchgeführten Experimente notwendig sind. Die experimentellen Ergebnisse wurden in Kapitel 6 präsentiert. Die Frequenzverteilung am LC SLM wurde gemessen und dabei bewiesen, dass die optimale Frequenzverteilung experimentell realisiert werden konnte. Des Weiteren wurden die exzellenten Eigenschaften des TFPs bestätigt. Im Allgemeinen emittiert der TFP Satellitenpulse durch interne Mehrfachreflexe. Mehrere Messungen haben jedoch gezeigt, dass diese Satellitenpulse einen zeitlichen Abstand von mindesten 4,05 ps vom Hauptpuls aufweisen und dass deren Intensität verschwindend gering ist. Die Phasenstabilität des Aufbaus beträgt σ = 28,3 mrad (λ/222) über einen Zeitraum von einer Stunde. Um die Stabilität für sehr lange Messzeiten zu verbessern, wurde eine Routine zur Phasenreduktion und zur Stabilisierung (OPRAS, engl. on-the-fly phase reduction and stabilization) unter Einbeziehung des Pulsformers entwickelt. Diese Routine erzeugt automatisiert einen komprimierten Puls mit minimierter relativer Phase zwischen den zwei Polarisationskomponenten und ermöglicht so eine Phasenstabilität von σ = 31,9 mrad (λ/197) über nahezu 24 Stunden. Ferner wurden verschieden Pulssequenzen erzeugt und charakterisiert, die die Möglichkeiten der konventionellen Pulsformung übertreffen. Die experimentellen Ergebnisse zeigen, dass geformte Pulse mit beliebigen Phasen, Amplituden und Polarisationszuständen generiert werden können. In allen Fällen wurde eine sehr hohe Übereinstimmung zwischen den Zielparametern und den experimentellen Daten erreicht. Für den zukünftigen Einsatz des Aufbaus wurden mögliche Erweiterungen vorgeschlagen. Diese sind nicht zwingend erforderlich, könnten aber die Leistung und die Einsatzmöglichkeiten des Vektorfeldformers weiter verbessern. Erstens wurde aufgezeigt, wie zwei Ausgangsstrahlen erzeugt werden könnten. Mit dieser Veränderung wäre es möglich, den größten Teil der Intensität des geformten Strahls für ein Experiment zu nutzen und gleichzeitig einen geringen Anteil für die Pulscharakterisierung oder für die Phasenstabilisierung mit der entwickelten Routine zu verwenden. Um chromatische Aberration zu vermeiden, wurde zweitens die prinzipielle Idee, das Linsenteleskop durch fokussierende Spiegel zu ersetzen, diskutiert. Für die verschiedenen erarbeiteten Parametrisierungen zur Vektorfeldkontrolle wurden einige Erweiterungen vorgeschlagen, um deren Einsatzmöglichkeiten noch weiter zu erhöhen. Außerdem wurde noch die Möglichkeit einer von Neumann Basis für den präsentierten Aufbau aufgezeigt. In zukünftigen Experimenten wird unser Aufbau mit einem Photoemissionselektronenmikroskop (PEEM) kombiniert. Dadurch kann die zeitliche Auflösung ultrakurzer Laserpulse mit der hohen räumlichen Auflösung der Elektronenmikroskopie vereint werden, was die zweidimensionale Spektroskopie und Quantenkontrolle von Nanostrukturen mit Hilfe polarisationsgeformter Femtosekunden-Laserpulse ermöglicht. Der Vektorfeldformer eröffnet in Verbindung mit anderen zuvor in unserer Gruppe implementierten chiral sensitiven Versuchsaufbauten neue Perspektiven für die chirale Femtochemie und Kontrolle. Der erarbeitete Vektorfeldformer erfüllt alle Anforderungen, um polarisationsgeformte Mehrfachpulssequenzen mit hoher Präzision zu erzeugen. Diese können verwendet werden, um zahlreiche polarisationssensitive Experimente durchzuführen. Durch die Stabilisierungsroutine OPRAS wird eine quasi unendlich lange Phasenstabilität des Aufbaus gewährleistet und komplexe und aufwendige Langzeitmessungen können ausgeführt werden. Die Tatsache, dass OPRAS keine weitere Hardware benötigt und der Aufbau nur einen einzigen zweilagigen Flüssigkristall-Lichtmodulator sowie ansonsten verhältnismäßig günstige Optiken erfordert, ermöglicht den Bau eines Vektorfeldformers zu vergleichsweise niedrigen Kosten. Wir hoffen, dass andere Forschergruppen von den detailreichen Einblicken in den Designprozess und die Software-Implementierung profitieren und dass die vollständige Vektorfeldformung in den nächsten Jahren genauso wie die konventionelle Pulsformung zu einer Standard-Technologie wird. KW - Ultrakurzer Lichtimpuls KW - vector-field shaper KW - vector-field control KW - polarization pulse shaping KW - femtosecond pulse shaping KW - Vektorfeldformer KW - Vektorfeldkontrolle KW - Polarisationspulsformung KW - Femtosekunden Pulsformung KW - Femtosekundenbereich KW - Impulsformung KW - Femtosekundenlaser Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142948 ER - TY - THES A1 - Dischinger, Ulrich Severin T1 - Auswirkungen unterschiedlicher Haltungsbedingungen auf Phänotyp und Genexpression im Mausmodell T1 - Effects of different environmental conditions on phenotype and gene expression in the mouse model N2 - In zahlreichen Untersuchungen konnte gezeigt werden, dass Umweltbedingungen im frühen Lebensalter einerseits die Entwicklung von Resilienz, d.h. Widerstandsfähigkeit gegenüber Stressoren, andererseits aber auch die Entwicklung physischer und psychischer Erkrankungen im weiteren Lebensverlauf beeinflussen können. Dabei wird angenommen, dass sich sowohl dezidiert positive als auch in Maßen aversive Umweltbedingungen mit rezidivierender Stressbelastung günstig auf die Resilienz im späteren Leben auswirken können. Auf neurobiologischer Ebene scheinen dabei das CRH und seine Rezeptoren (CRHR1 und CRHR2), das NPY-System sowie das NPS-System (insbesondere NPS-Rezeptor) eine besondere Rolle zu spielen. Jedoch sind die exakten Zusammenhänge und neurobiologischen Grundlagen weiterhin nur unzureichend aufgeklärt. Dies ist insbesondere insofern bedauernswert, da weiterer Erkenntnisgewinn auf diesem Gebiet möglicherweise Präventionsstrategien und Therapieoptionen für den Menschen begründen könnte. Um die Auswirkung der Umweltbedingungen im frühkindlichen Lebensalter auf die Resilienz im späteren Leben weiter aufzuklären, wurden im Rahmen dieser Arbeit insgesamt 310 Cd1-Mäuse den Haltungsbedingungen "Environmental Enrichment" (EE, Stimulation durch Spielobjekte) und "Maternal separation" (MS, wiederholte Stressbelastung durch Separation der Nachkommen vom Muttertier) sowie Standardhaltungsbedingungen unterworfen. Insgesamt 31 männlichen Tieren wurde im Alter von vier Wochen die Gehirne entnommen und aus diesen jeweils die Regionen Frontalcortex, Striatum, Nucleus accumbens, Hippocampus, Amygdala, dorsale Nuclei raphes und Hypothalamus herauspräpariert. Aus den gewonnenen Proben wurde RNA extrahiert, hieraus cDNA synthetisiert und abschließend - nach Ausschluss von Kontamination und Integritätsprüfung - die Expressionsraten der untersuchten Gene mittels RT-qPCR quantifiziert. Um auch verhaltensbiologische Konsequenzen der unterschiedlichen Haltungsbedingungen zu erfassen, wurden außerdem 30 weibliche sowie 30 männliche Tiere im weiteren Lebensverlauf verschiedenen Verhaltenstests zugeführt. In den Sucrose-Präferenz-Tests zeigten sich Effekte der Haltungsbedingung auf Sucrose-Konsum und Präferenz mit signifikant geringeren Werten der Haltungsgruppe EE. Bei der Auswertung der Openfield-Tests fanden sich Gruppen-Geschlechter-Interaktionseffekte mit signifikant geringeren Werten (Gesamtstrecke, Strecke und Aufenthaltsdauer im zentralen Bereich, Eintritte in den zentralen Bereich) der weiblichen EE-Tiere. In den Barnes Maze-Tests benötigten die Tiere der Haltungsgruppe EE an den meisten Testtagen signifikant weniger Zeit, um in die Escape-Box zu "entkommen". Auf neurobiologischer Ebene fanden sich signifikante Unterschiede der CRH-Expressionsraten in Amygdalae und Frontalcortex, der CRHR 1-Expressionsraten in Amygdalae und Hypothalamus sowie der CRHR2-Expressionsraten in Amygdalae und Hippocampus. Demgegenüber konnte kein signifikanter Effekt der Haltungsbedingung auf das NPY-System gefunden werden. Jedoch ließen sich signifikante Unterschiede der NPSR1-Expressionsraten in Amygdalae, Frontalcortex, dorsalen Nuclei raphes und Hypothalamus feststellen. Es kann also grundsätzlich von Auswirkungen unterschiedlich aversiver Haltungsbedingungen auf die Stress-Resilienz von Versuchstieren ausgegangen werden. Dies ist einerseits für Tierversuche allgemein von grundsätzlicher Bedeutung. Andererseits legen die Resultate eine entsprechende frühkindliche "Programmierung" auch im Menschen nahe. N2 - Chronic stress leads to several somatic and psychiatric diseases. Especially chronic stress in early stages of life predisposes to psychiatric disease in later life due to plasticity and therefore adaptability of the human brain in early life. On the other side repeated stress as well as decidedly positive conditions in early life potentially lead to resilience against stressors in later life. Data from animal studies suggest both options. Further insight into this matter could establish new prevention strategies in humans. The aim of this paper was to further examine the consequences of repeated stress on behaviour and gene expression in later life compared to decidedly positive conditions in a mouse model. Several genes, which play a role in stress processing, were examined, the CRH system, the NPY system and the NPS receptor. We found several effects of repeated stress vs. decidedly positive conditions in early life on behaviour and gene expression in later life, which were unfortunately not consistent. Further studies should be undertaken to gain further insight into this matter. KW - Stress KW - Resilienz KW - Prävention KW - Stress KW - Resilienz KW - resilience KW - Prävention KW - Prevention Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142955 ER - TY - CHAP A1 - Jannidis, Fotis A1 - Reger, Isabella A1 - Weimer, Lukas A1 - Krug, Markus A1 - Puppe, Frank T1 - Automatische Erkennung von Figuren in deutschsprachigen Romanen N2 - Eine wichtige Grundlage für die quantitative Analyse von Erzähltexten, etwa eine Netzwerkanalyse der Figurenkonstellation, ist die automatische Erkennung von Referenzen auf Figuren in Erzähltexten, ein Sonderfall des generischen NLP-Problems der Named Entity Recognition. Bestehende, auf Zeitungstexten trainierte Modelle sind für literarische Texte nur eingeschränkt brauchbar, da die Einbeziehung von Appellativen in die Named Entity-Definition und deren häufige Verwendung in Romantexten zu einem schlechten Ergebnis führt. Dieses Paper stellt eine anhand eines manuell annotierten Korpus auf deutschsprachige Romane des 19. Jahrhunderts angepasste NER-Komponente vor. KW - Digital Humanities KW - Figurenerkennung KW - Named-Entity-Recognition KW - Domänenadaption KW - Literatur Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-143332 UR - https://dhd2015.uni-graz.at/ ER -