TY - THES A1 - Sánchez Naya, Roberto T1 - Synthesis and Characterization of Dye-Containing Covalent Organic Frameworks T1 - Synthese und Charakterisierung von farbstoffhaltigen kovalenten organischen Netzwerken N2 - The present thesis adress the synthesis and characterization of novel COFs that contain dye molecules as integral components of the organic backbone. These chromophore-containing frameworks open new research lines in the field and call for the exploration of applications such as catalysis, sensing, or in optoelectronic devices. Initially, the fabrication of organic-inorganic composites by the growth of DPP TAPP COF around functionalized iron oxide nanoparticles is reported. By varying the ratio between inorganic nanoparticles and organic COFs, optoelectronic properties of the materials are adjusted. The document also reports the synthesis of a novel boron dipyrromethene-containing (BODIPY) COF. Synthesis, full characterization and the scope of potential applications with a focus on environmental remediation are discussed in detail. Last, a novel diketopyrrolopyrrole-containing (DPP) DPP-Py-COF based on the combination of DDP and pyrene building blocks is presented. The very low bandgap of these materials and initial investigations on the photosensitizing properties are discussed. N2 - Die Forschung an modernen porösen Materialien hat die Entwicklung von COFs als robuste, leichtgewichtige, hochgeordnete und vielseitig einsetzbare organische Materialien vorangetrieben. Der Einsatz von DCC ist entscheidend für den Aufbau hochkristalliner Netzwerke, die in der Lage sind, strukturelle Defekte selbst zu heilen (Kapitel 2.2). Für die einfache Bildung wohldefinierter Kristallite wurden verschiedene synthetische Strategien entwickelt (Kapitel 2.3). Darüber hinaus ist ein detailliertes Verständnis über die verschiedenen Reaktionen, die für die kovalente Verknüpfung organischer Bausteine eingesetzt werden (Kapitel 2.4), und der verschiedenen Topologien, die sich nach der Vernetzung ergeben (Kapitel 2.5), von grundlegender Bedeutung für die Entwicklung einer breiten Auswahl von Materialien für gezielte Anwendungen. ... KW - Organische Chemie KW - Porosität KW - Covalent Organic Framework KW - Reticular Chemistry KW - Dye KW - Porous Materials Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-288996 ER - TY - JOUR A1 - Weh, Manuel A1 - Shoyama, Kazutaka A1 - Würthner, Frank T1 - Preferential molecular recognition of heterochiral guests within a cyclophane receptor JF - Nature Communications N2 - The discrimination of enantiomers by natural receptors is a well-established phenomenon. In contrast the number of synthetic receptors with the capability for enantioselective molecular recognition of chiral substrates is scarce and for chiral cyclophanes indicative for a preferential binding of homochiral guests. Here we introduce a cyclophane composed of two homochiral core-twisted perylene bisimide (PBI) units connected by p-xylylene spacers and demonstrate its preference for the complexation of [5]helicene of opposite helicity compared to the PBI units of the host. The pronounced enantio-differentiation of this molecular receptor for heterochiral guests can be utilized for the enrichment of the P-PBI-M-helicene-P-PBI epimeric bimolecular complex. Our experimental results are supported by DFT calculations, which reveal that the sterically demanding bay substituents attached to the PBI chromophores disturb the helical shape match of the perylene core and homochiral substrates and thereby enforce the formation of syndiotactic host-guest complex structures. Hence, the most efficient substrate binding is observed for those aromatic guests, e. g. perylene, [4]helicene, phenanthrene and biphenyl, that can easily adapt in non-planar axially chiral conformations due to their inherent conformational flexibility. In all cases the induced chirality for the guest is opposed to those of the embedding PBI units, leading to heterochiral host-guest structures. KW - coordination chemistry KW - molecular capsules KW - stereochemistry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-357750 VL - 14 ER - TY - JOUR A1 - Brenner, Daniela A1 - Geiger, Nina A1 - Schlegel, Jan A1 - Diesendorf, Viktoria A1 - Kersting, Louise A1 - Fink, Julian A1 - Stelz, Linda A1 - Schneider-Schaulies, Sibylle A1 - Sauer, Markus A1 - Bodem, Jochen A1 - Seibel, Jürgen T1 - Azido-ceramides, a tool to analyse SARS-CoV-2 replication and inhibition — SARS-CoV-2 is inhibited by ceramides JF - International Journal of Molecular Sciences N2 - Recently, we have shown that C6-ceramides efficiently suppress viral replication by trapping the virus in lysosomes. Here, we use antiviral assays to evaluate a synthetic ceramide derivative α-NH2-ω-N3-C6-ceramide (AKS461) and to confirm the biological activity of C6-ceramides inhibiting SARS-CoV-2. Click-labeling with a fluorophore demonstrated that AKS461 accumulates in lysosomes. Previously, it has been shown that suppression of SARS-CoV-2 replication can be cell-type specific. Thus, AKS461 inhibited SARS-CoV-2 replication in Huh-7, Vero, and Calu-3 cells up to 2.5 orders of magnitude. The results were confirmed by CoronaFISH, indicating that AKS461 acts comparable to the unmodified C6-ceramide. Thus, AKS461 serves as a tool to study ceramide-associated cellular and viral pathways, such as SARS-CoV-2 infections, and it helped to identify lysosomes as the central organelle of C6-ceramides to inhibit viral replication. KW - ceramides KW - SARS-CoV-2 KW - azido-ceramides KW - sphingolipids Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313581 SN - 1422-0067 VL - 24 IS - 8 ER - TY - JOUR A1 - Menekse, Kaan A1 - Mahl, Magnus A1 - Albert, Julius A1 - Niyas, M. A. A1 - Shoyama, Kazutaka A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Supramolecularly Engineered Bulk‐Heterojunction Solar Cells with Self‐Assembled Non‐Fullerene Nanographene Tetraimide Acceptors JF - Solar RRL N2 - A series of novel imide‐functionalized C\(_{64}\) nanographenes is investigated as acceptor components in organic solar cells (OSCs) in combination with donor polymer PM6. These electron‐poor molecules either prevail as a monomer or self‐assemble into dimers in the OSC active layer depending on the chosen imide substituents. This allows for the controlled stacking of electron‐poor and electron‐rich π–scaffolds to establish a novel class of non‐fullerene acceptor materials to tailor the bulk‐heterojunction morphology of the OSCs. The best performance is observed for derivatives that are able to self‐assemble into dimers, reaching power conversion efficiencies of up to 7.1%. KW - nanographene KW - non-fullerene acceptors KW - organic solar cells KW - polycyclic aromatic hydrocarbons KW - self-assembly Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312099 VL - 7 IS - 2 ER - TY - JOUR A1 - Okuda, Takumi A1 - Lenz, Ann-Kathrin A1 - Seitz, Florian A1 - Vogel, Jörg A1 - Höbartner, Claudia T1 - A SAM analogue-utilizing ribozyme for site-specific RNA alkylation in living cells JF - Nature Chemistry N2 - Post-transcriptional RNA modification methods are in high demand for site-specific RNA labelling and analysis of RNA functions. In vitro-selected ribozymes are attractive tools for RNA research and have the potential to overcome some of the limitations of chemoenzymatic approaches with repurposed methyltransferases. Here we report an alkyltransferase ribozyme that uses a synthetic, stabilized S-adenosylmethionine (SAM) analogue and catalyses the transfer of a propargyl group to a specific adenosine in the target RNA. Almost quantitative conversion was achieved within 1 h under a wide range of reaction conditions in vitro, including physiological magnesium ion concentrations. A genetically encoded version of the SAM analogue-utilizing ribozyme (SAMURI) was expressed in HEK293T cells, and intracellular propargylation of the target adenosine was confirmed by specific fluorescent labelling. SAMURI is a general tool for the site-specific installation of the smallest tag for azide-alkyne click chemistry, which can be further functionalized with fluorophores, affinity tags or other functional probes. KW - Alkyltransferase Ribozyme SAMURI KW - Site-specific RNA labelling KW - bioorthogonal SAM analogue ProSeDMA KW - Chemical modification KW - RNA Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-328762 ER - TY - JOUR A1 - Brünnert, Daniela A1 - Seupel, Raina A1 - Goyal, Pankaj A1 - Bach, Matthias A1 - Schraud, Heike A1 - Kirner, Stefanie A1 - Köster, Eva A1 - Feineis, Doris A1 - Bargou, Ralf C. A1 - Schlosser, Andreas A1 - Bringmann, Gerhard A1 - Chatterjee, Manik T1 - Ancistrocladinium A induces apoptosis in proteasome inhibitor-resistant multiple myeloma cells: a promising therapeutic agent candidate JF - Pharmaceuticals N2 - The N,C-coupled naphthylisoquinoline alkaloid ancistrocladinium A belongs to a novel class of natural products with potent antiprotozoal activity. Its effects on tumor cells, however, have not yet been explored. We demonstrate the antitumor activity of ancistrocladinium A in multiple myeloma (MM), a yet incurable blood cancer that represents a model disease for adaptation to proteotoxic stress. Viability assays showed a potent apoptosis-inducing effect of ancistrocladinium A in MM cell lines, including those with proteasome inhibitor (PI) resistance, and in primary MM cells, but not in non-malignant blood cells. Concomitant treatment with the PI carfilzomib or the histone deacetylase inhibitor panobinostat strongly enhanced the ancistrocladinium A-induced apoptosis. Mass spectrometry with biotinylated ancistrocladinium A revealed significant enrichment of RNA-splicing-associated proteins. Affected RNA-splicing-associated pathways included genes involved in proteotoxic stress response, such as PSMB5-associated genes and the heat shock proteins HSP90 and HSP70. Furthermore, we found strong induction of ATF4 and the ATM/H2AX pathway, both of which are critically involved in the integrated cellular response following proteotoxic and oxidative stress. Taken together, our data indicate that ancistrocladinium A targets cellular stress regulation in MM and improves the therapeutic response to PIs or overcomes PI resistance, and thus may represent a promising potential therapeutic agent. KW - multiple myeloma KW - ancistrocladinium A KW - naphthylisoquinoline alkaloids KW - proteasome inhibitor resistance KW - RNA splicing KW - cellular stress response KW - proteasome subunit beta type-5 (PSMB5) KW - activating transcription factor 4 (ATF4) KW - ataxia teleagiectasia mutated (ATM) KW - H2A histone family member X (H2AX) Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-362887 SN - 1424-8247 VL - 16 IS - 8 ER - TY - JOUR A1 - Noll, Niklas A1 - Groß, Tobias A1 - Shoyama, Kazutaka A1 - Beuerle, Florian A1 - Würthner, Frank T1 - Folding‐Induced Promotion of Proton‐Coupled Electron Transfers via Proximal Base for Light‐Driven Water Oxidation JF - Angewandte Chemie International Edition N2 - Proton‐coupled electron‐transfer (PCET) processes play a key role in biocatalytic energy conversion and storage, for example, photosynthesis or nitrogen fixation. Here, we report a series of bipyridine‐containing di‐ to tetranuclear Ru(bda) macrocycles 2 C–4 C (bda: 2,2′‐bipyridine‐6,6′‐dicarboxylate) to promote O−O bond formation. In photocatalytic water oxidation under neutral conditions, all complexes 2 C–4 C prevail in a folded conformation that support the water nucleophilic attack (WNA) pathway with remarkable turnover frequencies of up to 15.5 s\(^{−1}\) per Ru unit respectively. Single‐crystal X‐ray analysis revealed an increased tendency for intramolecular π‐π stacking and preorganization of the proximal bases close to the active centers for the larger macrocycles. H/D kinetic isotope effect studies and electrochemical data demonstrate the key role of the proximal bipyridines as proton acceptors in lowering the activation barrier for the crucial nucleophilic attack of H\(_{2}\)O in the WNA mechanism. KW - artificial photosynthesis KW - folded macrocyles KW - homogeneous catalysis KW - photocatalysis KW - Ruthenium complexes Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312020 VL - 62 IS - 7 ER - TY - INPR A1 - Fersch, Daniel A1 - Malý, Pavel A1 - Rühe, Jessica A1 - Lisinetskii, Victor A1 - Hensen, Matthias A1 - Würthner, Frank A1 - Brixner, Tobias T1 - Single-Molecule Ultrafast Fluorescence-Detected Pump–Probe Microscopy N2 - We introduce fluorescence-detected pump–probe microscopy by combining a wavelength-tunable ultrafast laser with a confocal scanning fluorescence microscope, enabling access to the femtosecond time scale on the micrometer spatial scale. In addition, we obtain spectral information from Fourier transformation over excitation pulse-pair time delays. We demonstrate this new approach on a model system of a terrylene bisimide (TBI) dye embedded in a PMMA matrix and acquire the linear excitation spectrum as well as time-dependent pump–probe spectra simultaneously. We then push the technique towards single TBI molecules and analyze the statistical distribution of their excitation spectra. Furthermore, we demonstrate the ultrafast transient evolution of several individual molecules, highlighting their different behavior in contrast to the ensemble due to their individual local environment. By correlating the linear and nonlinear spectra, we assess the effect of the molecular environment on the excited-state energy. KW - Fluoreszenz KW - Ultrafast spectroscopy KW - Single-molecule microscopy Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313485 ER - TY - THES A1 - Mims, David T1 - Einblicke in die Spinchemie durch Untersuchung des Magnetfeldeffektes in rigide gebundenen Radikalionenpaaren T1 - Insights into the field of spin chemistry by studying the magnetic field effect in rigidly bound radical ion pairs N2 - Synthese starrer Donor-Akzeptor-Verbindungen und Untersuchung des Magnetfeldeffektes auf Lebenszeit resultierender Biradikale mittels optischer Spektroskopie. N2 - Synthesis of rigid donor-acceptor compounds and investigation of the magnetic field effect on the lifetimes of resulting biradicals using optical spectroscopy. KW - Magnetfeldeffekt KW - Radikalpaar KW - Biradikal KW - Präparative organische Chemie KW - Physikalische Chemie KW - Spinchemie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-303547 ER - TY - THES A1 - Roos, Lena T1 - Synthese unterschiedlicher Tetracene und Untersuchung ihrer optischen und elektronischen Eigenschaften T1 - Synthesis of tetracene derivatives and investigation of their optical and electronical properties N2 - Mittels einer fünfstufigen Synthese wurde das 2,2´-Ditetracen als Modellsystem zur Erforschung von singlet fission-Prozessen hergestellt. Die Synthese wurde mit einer Gesamtausbeute von 21 % durchgeführt, wobei der Schlüsselschritt, die Kopplung der beiden Monomere, durch eine Suzuki-Kopplung erfolgte. Das gewünschte Produkt konnte nach gründlicher Reinigung mittels Gradientensublimation als leuchtend rote Einkristalle erhalten werden. Während die Emissionsspektren der Einzelmoleküle nahezu identisch sind, zeigen Untersuchungen mittels Photolumineszenzspektroskopie eine Rotverschiebung im Emissionsspektrum des Dimer-Einkristalls im Vergleich zum Einkristall des Tetracen-Monomers. Durch theoretische Berechnung konnte die Absenkung des S1-Zustands des Dimers im Kristall erklärt werden, wodurch die Energiebedingung für singlet fission (2 E(T1) ≤ E(S1)) nicht mehr erfüllt ist. Weiterhin wurden mehrere mit Alkylgruppen und Vinylgruppen substituierte Tetracenderivate synthetisiert und diese mittels optischer und elektrochemischer Methoden auf ihre Eigenschaften hin untersucht. Es wurde bei allen synthetisierten Derivaten eine Rotverschiebung der Hauptbanden im Absorptionsspektrum beobachtet, was durch einen kleineren HOMO-LUMO-Abstand im Vergleich zum nicht substituierten Tetracen erklärt wird. Es wurde zudem eine erhöhte Stabilität dieser Derivate gegenüber Umwelteinflüssen wie Licht und Sauerstoff, die die Bildung von Endoperoxiden und Dimeren zur Folge haben, festgestellt. Dies kann auf sterische Effekte sowie die Stabilisierung des biradikalischen Zustands dieser Moleküle durch Hyperkonjugation und Resonanzeffekte zurückgeführt werden. N2 - In a five-step synthesis, the 2,2'-ditetracene was prepared as a model system to study singlet fission processes. The synthesis was carried out with an overall yield of 21%, and the key step, the coupling of the two monomers, was carried out by a Suzuki coupling. The desired product was obtained as bright red single crystals after purification by gradient sublimation. While the emission spectra of the single molecules are nearly identical, investigations by photoluminescence spectroscopy show a red shift in the emission spectrum of the dimer single crystal compared to the single crystal of the tetracene monomer. Theoretical calculation could explain the lowering of the S1 state of the dimer in the crystal, which means that the energy condition for singlet fission (2 E(T1) ≤ E(S1)) is no longer fulfilled. Furthermore, several with alkyl groups and vinyl groups substituted tetracenes derivatives were synthesized and their properties were investigated by optical and electrochemical measurements. A red shift of the peaks in the absorption spectrum was observed for all synthesized derivatives, which is explained by a smaller HOMO-LUMO distance compared to the unsubstituted tetracene. Increased stability of these derivatives to environmental effects such as light and oxygen, resulting in the formation of endoperoxides and dimers, was also observed. This can be attributed to steric effects as well as stabilization of the biradical character of these molecules by hyperconjugation and resonance effects. KW - Polycyclische Aromaten KW - Naphthacenderivate KW - Chemische Synthese KW - Tetracenderivate KW - Polycyclische aromatische Kohlenwasserstoffe KW - Tetracene derivatives KW - Polycyclic aromatic hydrocarbons KW - singlet fission Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313268 ER - TY - JOUR A1 - Brust, Felix A1 - Nagler, Oliver A1 - Shoyama, Kazutaka A1 - Stolte, Matthias A1 - Würthner, Frank T1 - Organic Light‐Emitting Diodes Based on Silandiol‐Bay‐Bridged Perylene Bisimides JF - Advanced Optical Materials N2 - Perylene bisimides (PBIs) are among the best fluorophores but have to be enwrapped for optoelectronic applications by large and heavy substituents to prevent their ππ‐stacking, which is known to accelerate non‐radiative decay processes in the solid state. Here, light‐weight di‐tert‐butylsilyl groups are introduced to bridge 1,12‐dihydroxy and 1,6,7,12‐tetrahydroxy PBIs to afford sublimable dyes for vacuum‐processed optoelectronic devices. For both new compounds, this substitution provides a twisted and shielded perylene π‐core whose, via OSiObridges, rigid structure affords well‐resolved absorption and emission spectra with strong fluorescence in solution, as well as in the solid state. The usefulness of these dyes for vacuum‐processed optoelectronic devices is demonstrated in organic light‐emitting diodes (OLEDs) that show monomer‐like emission spectra and high maximum external quantum efficiency (EQEmax) values of up to 3.1% for the doubly silicon‐bridged PBI. KW - organic light emitting diodes KW - perylene bisimide dyes KW - rigidification KW - solid‐state emission KW - vacuum processable Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312599 VL - 11 IS - 5 ER - TY - JOUR A1 - Gryszel, Maciej A1 - Schlossarek, Tim A1 - Würthner, Frank A1 - Natali, Mirco A1 - Głowacki, Eric Daniel T1 - Water‐soluble cationic perylene diimide dyes as stable photocatalysts for H\(_2\)O\(_2\) evolution JF - ChemPhotoChem N2 - Photocatalytic generation of hydrogen peroxide, H\(_2\)O\(_2\), has gained increasing attention in recent years, with applications ranging from solar energy conversion to biophysical research. While semiconducting solid‐state materials are normally regarded as the workhorse for photogeneration of H\(_2\)O\(_2\), an intriguing alternative for on‐demand H\(_2\)O\(_2\) is the use of photocatalytic organic dyes. Herein we report the use of water‐soluble dyes based on perylene diimide molecules which behave as true molecular catalysts for the light‐induced conversion of dissolved oxygen to hydrogen peroxide. In particular, we address how to obtain visible‐light photocatalysts which are stable with respect to aggregation and photochemical degradation. We report on the factors affecting efficiency and stability, including variable electron donors, oxygen partial pressure, pH, and molecular catalyst structure. The result is a perylene diimide derivative with unprecedented peroxide evolution performance using a broad range of organic donor molecules and operating in a wide pH range. KW - hydrogen peroxide KW - oxygen reduction reaction KW - perylene KW - photocatalysis KW - dyes/pigments Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-370250 SN - 2367-0932 VL - 7 IS - 9 ER - TY - THES A1 - Neitz, Hermann T1 - Hydrophobic recognition motifs in functionalized DNA T1 - Hydrophobe Erkennungsmotive in funktionalisierter DNA N2 - In wässriger Umgebung spielen hydrophobe Wechselwirkungen eine wichtige Rolle für die DNA. Die Einführung von Modifikationen, die auf hydrophoben aromatischen Einheiten basieren, kann die Erkennung und Reaktivität von funktionellen Gruppen in der DNA steuern. Modifikationen können durch ein künstliches Rückgrat oder in Form einer Erweiterung der Nukleobasen eingebracht werden und so zu zusätzlichen Eigenschaften der DNA führen. Diese Dissertation befasst sich mit der Verwendung von hydrophoben Einheiten zur Funktionalisierung von DNA. Im ersten Teil der Arbeit wurde das Tolanmotiv (Diphenylacetylen) in Kombination mit dem acyclischen Rückgrat von GNA und BuNA verwendet, um Erkennungseinheiten im DNA-Kontext zu erzeugen. Die gezielte Fluorierung der aromatischen Ringe des Tolan-Bausteins bildete die Grundlage für eine supramolekulare Sprache, die auf Aren-Fluoroaren-Wechselwirkungen basiert. Die spezifische Erkennung wurde mittels thermodynamischer, kinetischer und NMR-spektroskopischer Methoden untersucht. Im zweiten Teil der Arbeit wurden Desoxyuridin-Derivate mit einer hydrophoben aromatischen Modifikation hergestellt und in die DNA-Doppelhelix eingebaut. Die Bestrahlung mit UV-Licht führte zu einer [2+2]-Cycloaddition zwischen zwei modifizierten Nukleosiden in der DNA. Das Reaktionsprodukt wurde strukturell charakterisiert und die Reaktion in verschiedenen biochemischen und nanotechnologischen DNA-Anwendungen eingesetzt. N2 - In aqueous environment, hydrophobic interactions play an important role for DNA. The introduction of modifications based on hydrophobic aromatic moieties offers additional ways for controlling recognition and reactivity of functional groups in DNA. Modifications are introduced through an artificial backbone or in the form of an extension of the nucleobases, resulting in additional properties of the DNA. This dissertation focuses on the use of hydrophobic units for the functionalization of DNA. In the first part of the work, the tolane (i. e. diphenylacetylene) motif was used in combination with the acyclic backbone of GNA and BuNA to generate recognition units in the DNA context. Fluorination of the aromatic rings in the tolane moiety provided the basis for a supramolecular language based on arene-fluoroarene interactions. The specific recognition was investigated by thermodynamic, kinetic and NMR spectroscopic methods. In the second part of the work, deoxyuridine derivatives with a hydrophobic aromatic modification were prepared and incorporated into DNA duplexes. The irradiation with UV light led to a [2+2] cycloaddition reaction between two modified nucleosides in the DNA. This reaction product was structurally characterized and the reaction was used in various biochemical and nanotechnological DNA applications. KW - Supramolekulare Chemie KW - Arene-Fluoroarene KW - Artificial Base Pair KW - Supramolecular Interaction KW - XNA KW - Crosslinking KW - DNA KW - DNS Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348382 ER - TY - JOUR A1 - Noll, Niklas A1 - Würthner, Frank T1 - Bioinspired water preorganization in confined space for efficient water oxidation catalysis in metallosupramolecular ruthenium architectures JF - Accounts of Chemical Research N2 - Conspectus Nature has established a sustainable way to maintain aerobic life on earth by inventing one of the most sophisticated biological processes, namely, natural photosynthesis, which delivers us with organic matter and molecular oxygen derived from the two abundant resources sunlight and water. The thermodynamically demanding photosynthetic water splitting is catalyzed by the oxygen-evolving complex in photosystem II (OEC-PSII), which comprises a distorted tetramanganese–calcium cluster (CaMn\(_4\)O\(_5\)) as catalytic core. As an ubiquitous concept for fine-tuning and regulating the reactivity of the active site of metalloenzymes, the surrounding protein domain creates a sophisticated environment that promotes substrate preorganization through secondary, noncovalent interactions such as hydrogen bonding or electrostatic interactions. Based on the high-resolution X-ray structure of PSII, several water channels were identified near the active site, which are filled with extensive hydrogen-bonding networks of preorganized water molecules, connecting the OEC with the protein surface. As an integral part of the outer coordination sphere of natural metalloenzymes, these channels control the substrate and product delivery, carefully regulate the proton flow by promoting pivotal proton-coupled electron transfer processes, and simultaneously stabilize short-lived oxidized intermediates, thus highlighting the importance of an ordered water network for the remarkable efficiency of the natural OEC. Transferring this concept from nature to the engineering of artificial metal catalysts for fuel production has fostered the fascinating field of metallosupramolecular chemistry by generating defined cavities that conceptually mimic enzymatic pockets. However, the application of supramolecular approaches to generate artificial water oxidation catalysts remained scarce prior to our initial reports, since such molecular design strategies for efficient activation of substrate water molecules in confined nanoenvironments were lacking. In this Account, we describe our research efforts on combining the state-of-the art Ru(bda) catalytic framework with structurally programmed ditopic ligands to guide the water oxidation process in defined metallosupramolecular assemblies in spatial proximity. We will elucidate the governing factors that control the quality of hydrogen-bonding water networks in multinuclear cavities of varying sizes and geometries to obtain high-performance, state-of-the-art water oxidation catalysts. Pushing the boundaries of artificial catalyst design, embedding a single catalytic Ru center into a well-defined molecular pocket enabled sophisticated water preorganization in front of the active site through an encoded basic recognition site, resulting in high catalytic rates comparable to those of the natural counterpart OEC-PSII. To fully explore their potential for solar fuel devices, the suitability of our metallosupramolecular assemblies was demonstrated under (electro)chemical and photocatalytic water oxidation conditions. In addition, testing the limits of structural diversity allowed the fabrication of self-assembled linear coordination oligomers as novel photocatalytic materials and long-range ordered covalent organic framework (COF) materials as recyclable and long-term stable solid-state materials for future applications. KW - catalysts KW - catalytic activity KW - ligands KW - macrocycles KW - water oxidation KW - ruthenium Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-361232 SN - 0001-4842 VL - 57 IS - 10 ER - TY - JOUR A1 - Kirchner, Philipp H. A1 - Schramm, Louis A1 - Ivanova, Svetlana A1 - Shoyama, Kazutaka A1 - Würthner, Frank A1 - Beuerle, Florian T1 - A water-stable boronate ester cage JF - Journal of the American Chemical Society N2 - The reversible condensation of catechols and boronic acids to boronate esters is a paradigm reaction in dynamic covalent chemistry. However, facile backward hydrolysis is detrimental for stability and has so far prevented applications for boronate-based materials. Here, we introduce cubic boronate ester cages 6 derived from hexahydroxy tribenzotriquinacenes and phenylene diboronic acids with ortho-t-butyl substituents. Due to steric shielding, dynamic exchange at the Lewis acidic boron sites is feasible only under acid or base catalysis but fully prevented at neutral conditions. For the first time, boronate ester cages 6 tolerate substantial amounts of water or alcohols both in solution and solid state. The unprecedented applicability of these materials under ambient and aqueous conditions is showcased by efficient encapsulation and on-demand release of β-carotene dyes and heterogeneous water oxidation catalysis after the encapsulation of ruthenium catalysts. KW - absorption KW - hydrocarbons KW - materials KW - organic compounds KW - stability KW - boronate esters Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-361245 SN - 0002-7863 VL - 146 IS - 8 ER - TY - THES A1 - Wagenhäuser [geb. Vonhausen], Yvonne T1 - Thermodynamic Investigations on the Dimerization and Anti-Cooperative Self-Assembly of Dipolar Merocyanines T1 - Thermodynamische Untersuchungen zur Dimerisierung und anti-kooperativen Selbstassemblierung von dipolaren Merocyaninen N2 - Dipolar merocyanines are very attractive supramolecular building blocks, as they combine interesting functional properties with strong, directional intermolecular interactions. The pyridine dioxocyano-pyridine (PYOP) chromophore (Chapter 2.2), used in this thesis, stands out because of its exceptionally high ground state dipole moment (g ~ 17 D), in combination with the option to retain good solubility also in unpolar solvents, by decoration with solubilizing groups. The reliable binding motif of anti-parallel -stacking due to dipole-dipole interactions has allowed the design of molecular building blocks that form assemblies of predictable geometry. The intense unstructured charge transfer UV/Vis absorption band (eg ~ 10.7 D) is a result of the dominant contribution of the zwitterionic resonance structure which brings the PYOP chromophore just beyond the cyanine limit in solvents of low polarity (c2 = 0.60, 1,4 dioxane). The high sensitivity of the S0 – S1 UV/Vis absorption band to the environment manifests itself in a pronounced negative solvatochromism and strong H-type exciton coupling within -stacked PYOP assemblies. In accordance with the classical molecular exciton theory, an increasing hypsochromic shift of the dominant absorption band of these H aggregates can be observed as the stack size increases up to about six chromophores, where it levels out at about max ~ 440 nm (CHCl3). This allows a uniquely simple estimation of the number of interacting chromophores within the self-assembled structure from a single UV/Vis absorption spectrum of an aggregate. The defined and well investigated PYOP dimer formation was employed in this thesis to probe the applicability and limitations of concentration-, temperature-, and solvent-dependent self-assembly studies (Chapter 3). Straightforward theoretical models to evaluate datasets of concentration-, temperature-, and solvent-dependent UV/Vis absorption by nonlinear regression analysis were derived for the case of dimer formation (Chapter 2.1). Although the dimer model is well known and widely applied in literature, this detailed derivation is helpful to understand assumptions and potential problems of the different approaches for the determination of thermodynamic parameters. This helps to decide on the most appropriate method to analyse a system of interest. In this regard it should be noted that covering a large portion of the self-assembly process with the experimental data is a prerequisite for the accuracy of the analysis. Additionally, many of the insights can also be transferred to other self-assembly systems like supramolecular polymerization or host-guest interactions. The concentration-dependent analysis is the most straightforward method to investigate self-assembly equilibria. No additional assumptions, besides mass balance and mass action law, are required. Since it includes the least number of parameters (only K, if M/D are known), it is the most, or even only, reliable method, to elucidate the self-assembly mechanism of an unknown system by model comparison. To cover a large concentration range, however, the compound must be soluble enough and generally sample amounts at least in the low mg scale must be available. The temperature-dependent analysis has the advantage that all thermodynamic parameters G0, H0 and S0 can be obtained from a single sample in one automated measurement. However, the accessible temperature-range is experimentally often quite limited and dependent on the solvent. For systems which do not show the transition from monomer to aggregate in a narrow temperature range, as given for, e.g., cooperative aggregation or processes with a high entropy contribution, often not the entire self-assembly process can be monitored. Furthermore, the assumptions of temperature-independent extinction coefficients of the individual species as well as temperature-independent H0 and S0 must be met. Monte Carlo simulations of data sets demonstrated that even minor changes in experimental data can significantly impact the optimized values for H0 and S0. This is due to the redundancy of these two parameters within the model framework and even small thermochromic effects can significantly influence the results. The G0 value, calculated from H0 and S0, is, however, still rather reliable. Solvent-dependent studies can often cover the entire self-assembly process from monomeric (agg = 0) to the fully aggregated state (agg = 1). However, for dyes with strong solvatochromic effects, such as the dipolar merocyanines investigated in this thesis, the results are affected. Also, the assumption of a linear relation of the binding energy G0 and the fraction of denaturating solvent f, which is based on linear free energy relationships between G0 and the solvent polarity, can lead to errors. Especially when specific solvent effects are involved. For the evaluation of experimental data by nonlinear regression, general data analysis software can be used, where user-defined fit models and known parameters can be implemented as desired. Alternatively, multiple specialized programs for analysing self-assembly data are available online. While the latter programs are usually more user-friendly, they have the disadvantage of being a “black box” where only pre-implemented models can be used without the option for the user to adapt models or parameters for a specific system. In Chapter 3 comprehensive UV/Vis absorption datasets are presented for the dimerization of merocyanine derivative 1 in 1,4-dioxane, which allowed for the first time a direct comparison of the results derived from concentration-, temperature-, and solvent-dependent self-assembly studies. The results for the binding constant K and corresponding G0 from the concentration- and temperature-dependent analysis were in very good agreement, also in comparison to the results from ITC. For the temperature-dependent analysis, though, multiple datasets of samples with different concentration had to be evaluated simultaneously to cover a meaningful part of the self-assembly process. Furthermore, a significant dependence of the optimized parameters H0 and S0 on the wavelength chosen for the analysis was observed. This can be rationalized by the small thermochromic shifts of both the monomer and the dimer UV/Vis absorption band. The results from the solvent-dependent evaluation showed the largest deviation, as expected for the highly solvatochromic merocyanine dye. However, even here by evaluation at 491 and 549 nm the deviation for G0 was only 2.5 kJ mol1 (9%) with respect to the results from the concentration-dependent analysis (G0 = 29.1 kJ mol1). Thus, despite the strong solvatochromism of the dipolar chromophore, it can still be considered a reliable method for estimating the binding strength. Furthermore, multiple repetitions of the concentration-, temperature-, and solvent-dependent studies provided insight into the reproducibility of the results and possible sources of experimental errors. In all cases, the deviations of the results were small (G0 < 0.4 kJ mol1) and within the same range as the fit error from the nonlinear regression analysis. The insights from these studies were an important basis for the in-depth investigation of a more complex supramolecular system in Chapter 4, as a single method is often not enough to capture the full picture of a more complicated self-assembly process. To elucidate the anti-cooperative self-assembly of the chiral merocyanine 2, a combination of multiple techniques had to be applied. Solvent-dependent UV/Vis absorption studies in CH2Cl2/MCH mixtures showed the step-wise assembly of the merocyanine monomer (max(M) = 549 nm, CH2Cl2) to first a dimer (max(D) = 498 nm, CH2Cl2/MCH 15:85) by dipole-dipole interactions, and then a -stacked higher aggregate (max(H) = 477 nm, MCH), with pronounced H-type coupling. The thermodynamic evaluation of this data, however, suffered from the severe solvatochromism, especially of the monomeric species (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Therefore, concentration-dependent studies were performed at three different temperatures (298, 323, 353 K) to elucidate the self-assembly mechanism and determine reliable thermodynamic parameters. The studies at elevated temperatures were hereby necessary, to obtain experimental data over a larger agg--range. Due to the pronounced difference in the thermodynamic driving force for dimerization and higher aggregate formation (KD/K5 = 6500) a concentration range exists in MCH where almost exclusively the dimer species of 2 is present, before further self-assembly by dispersion interactions occurs. Therefore, the data could be evaluated independently for the two self-assembly steps. The self-assembly of dimers into the higher aggregate could not be described by the isodesmic model but was fitted satisfactorily to a pentamer model. This rather small size of about ten -stacked PYOP chromophores was, furthermore, consistently indicated by AFM, VPO and DOSY NMR measurements. Based on 1D and 2D NMR data as well as the strong bisignate CD signal of the higher aggregate in combination with TD-DFT calculations, a P-helical stack is proposed as its structure. The small size can be rationalized by the anti-cooperative self-assembly mechanism and the sterical demand of the solubilizing trialkoxyphenyl and the chiral tetralin substituents. Additionally, the aliphatic shell formed by the solubilizing chains around the polar chromophore stack, can account for the exceptionally high solubility of 2 in MCH (> 15 mg mL1). These combined studies of the self-assembly process enabled the identification of suitable conditions for the investigation of fluorescence properties of the individual aggregate species. Aggregation-induced emission enhancement was observed for the almost non-emissive monomer (Fl(M) = 0.23%), which can be rationalized by the increasing rigidification within the dimer (Fl(D) = 2.3%) and the higher aggregate (Fl(H) = 4.5%). The helical chirality of the PYOP decamer stack, furthermore, gave rise to a strong CPL signal with a large glum value of 0.011. The important conclusion of this thesis is that the temperature- and solvent-dependent analyses are valid alternatives to the classical concentration-dependent analysis to determine thermodynamic parameters of self-assembly equilibria. Although, for a specific supramolecular system, one approach might be favourable over the others for a variety of reasons. The experimental limitations often demand a combination of techniques to fully elucidate a self-assembly process and to gain insights in the aggregate structure. The anti-cooperative merocyanine self-assembly, which was described here for the first time for the PYOP merocyanine 2, is no exception. Besides the interest in the merocyanine assemblies from a structural and functional point of view, the insights gained from the presented studies can also be transferred to other self-assembly systems and be a guide to find the most appropriate analysis technique. N2 - Dipolare Merocyanine sind sehr attraktive supramolekulare Bausteine, da sie interessante funktionale Eigenschaften mit starken, gerichteten zwischenmolekularen Wechselwirkungen vereinen. Der Pyridin-dioxocyano-pyridin (PYOP)-Chromophor (Kapitel 2.2), welcher in dieser Arbeit verwendet wurde, zeichnet sich durch sein besonders starkes Grundzustands-dipolmoment (g ~ 17 D) aus, in Kombination mit der Möglichkeit durch Funktionalisierung mit löslichkeitsvermittelnden Gruppen dennoch gute Löslichkeit zu bewahren. Das zuverlässige Bindungsmotiv der durch Dipol-Dipol Wechselwirkungen anti-parallel  gestapelten Merocyanine ermöglicht es, gezielt molekulare Bausteine zu entwerfen, welche sich zu Strukturen von vorhersagbarer Geometrie zusammenlagern. Der dominante Beitrag der zwitterionischen Resonanzstruktur führt zu einer intensiven, unstrukturierten Charge-Transfer UV/Vis-Absorptionsbande (eg ~ 10.7 D) und bringt den PYOP Chromophor leicht jenseits des Cyanin-Limits in unpolaren Lösungsmitteln (c2 = 0.60, 1,4-Dioxan). Die Sensitivität der S0 S1 UV/Vis-Absorptionsbande gegenüber der Umgebung zeigt sich in der ausgeprägten negativen Solvatochromie und einer starken H artigen excitonischen Kopplung in -gestapelten Aggregaten. In Übereinstimmung mit klassischer Excitonen-Theorie kann eine zunehmende hypsochrome Verschiebung der dominanten Absorptionsbande mit zunehmender Größe der H-Aggregate beobachtet werden, bis bei etwa sechs Chromophoren und max ~ 440 nm ein Plateau erreicht wird. Dies ermöglicht eine einmalig einfache Abschätzung, der Anzahl an wechselwirkenden Chromophoren innerhalb einer Aggregatstruktur, basierend auf einem einzigen UV/Vis-Absorptionsspektrum. Das definierte und gut untersuchte Beispiel des PYOP-Dimers wurde in dieser Arbeit verwendet, um die Anwendbarkeit und die Grenzen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien auszutesten (Kapitel 3). Theoretische Modelle zur thermodynamischen Auswertung von konzentrations-, temperatur- und lösungsmittelabhängigen Studien mittels nichtlinearer Regression wurden für das Beispiel der Dimerisierung hergeleitet (Kapitel 2). Obwohl das Dimer-Modell literaturbekannt ist, ist diese detaillierte Herleitung hilfreich, um die Annahmen zu verstehen, die dem Modell zugrunde liegen. So können potenzielle Problemquellen der verschiedenen Methoden erkannt und die geeignetste Methode zur Bestimmung der thermodynamischen Parameter für ein bestimmtes System ausgewählt werden. Hierbei sollte man beachten, dass es sich für die Aussagekraft der Analyse klar als zuträglich erwiesen hat, wenn ein möglichst großer Bereich des Aggregationssprozesses von den experimentellen Daten abgedeckt werden kann. Viele der hier gewonnen Erkenntnisse lassen sich auch auf andere Systeme wie supramolekulare Polymere oder Wirt-Gast-Komplexe übertragen. Die konzentrationsabhängige Analyse ist die direkteste Methode, um ein supramolekulares Gleichgewicht zu untersuchen. Sie erfordert keine zusätzlichen Annahmen, außer dem Massenerhalt und dem Massenwirkungsgesetz. Da das konzentrationsabhängige mathematische Modell die wenigsten Parameter enthält (nur K, wenn M/D bekannt), ist es die zuverlässigste, wenn nicht sogar die einzig zuverlässige, Methode, um den Aggregationsmechanismus durch einen Vergleich der experimentellen Daten mit verschiedenen Modellen aufzuklären. Allerdings muss die zu untersuchende Verbindung hierbei löslich genug sein, damit ein großer Teil des Aggregationsprozesses in den Studien abgebildet werden kann und es werden üblicherweise Substanzmengen im niedrigen mg Bereich benötig. Die temperaturabhängige Analyse hat den Vorteil, dass alle thermodynamischen Parameter G0, H0 und S0 in einer einzigen automatisierten Messung einer einzelnen Probe erhalten werden können. Allerdings ist der experimentell zugängliche Temperaturbereich oft sehr eingeschränkt und abhängig von dem verwendeten Lösungsmittel. Für Systeme, bei denen der Übergang vom Monomer zum Aggregat nicht in einem engen Temperaturbereich erfolgt, z.B. aufgrund von Kooperativität oder einem großen Entropie-Beitrag, ist es oft nicht möglich den gesamten Aggreationsprozess abzubilden. Zusätzlich sollten die Annahmen, dass sowohl die Extinktionskoeffizienten der einzelnen Spezies sowie H0 und S0 temperaturunabhängig sind, zutreffen. Mittels Monte Carlo Simulationen konnte gezeigt werden, dass selbst kleine Änderungen in den experimentellen Daten die erhaltenen Werte von H0 und S0 deutlich beeinflussen können. Dies liegt daran, dass die beiden Parameter im mathematischen Modell nicht völlig unabhängig voneinander sind. Selbst geringfügige thermochrome Veränderungen können daher die Ergebnisse für H0 und S0 beeinflussen. Die G0-Werte, die sich aus H0 und S0 berechnen lassen, sind allerding dennoch recht zuverlässig. Mittels lösungsmittelabhängiger Studien ist es oft am einfachsten, den vollständigen Prozess vom Monomer (agg = 0) bis zum Aggregat (agg = 1) abzubilden. Für stark solvatochrome Farbstoffe wie die hier untersuchten dipolaren Merocyanine werden die Ergebnisse allerdings deutlich verfälscht. Auch die Annahme einer linearen Abhängigkeit der Bindungsenergie G0 und der Lösungsmittelzusammensetzung f, die auf linearen Freie-Energie Beziehungen zwischen G0 und der Lösungsmittelpolarität beruhen, kann zu Abweichungen führen, vor allem, wenn spezifische Lösungsmitteleffekte involviert sind. Die Auswertung der experimentellen Daten erfolgt mittels nichtlinearer Regression. Hierfür können diverse Datenauswertungsprogramme genutzt werden, in die sich benutzerdefinierte Modelle inklusive bekannter Parameter implementieren lassen. Alternativ gibt es auch eine Auswahl von spezialisierten Programmen zur Auswertung von Aggregationsdaten im Internet. Diese sind zwar deutlich benutzerfreundlicher, aber auch „Black Boxes“, deren voreingestellte Modelle und Parameter in der Regel nicht vom Nutzer für ein spezielles System angepasst werden können. In Kapitel 3 wurden umfangreiche UV/Vis-Absorptionsstudien für die Dimerisierung von Merocyanin 1 in 1,4-Dioxan vorgestellt, welche zum ersten Mal einen direkten Vergleich zwischen den Ergebnissen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien ermöglichten. Die Ergebnisse für die Bindungskonstante K und dem dazugehörigen G0-Wert aus der konzentrations- und temperaturabhängigen Analyse stimmen mit den Ergebnissen der isothermalen Titrationskalorimetrie (ITC) überein. Bei der temperaturabhängigen Auswertung mussten allerdings mehrere Datensätze von Proben mit unterschiedlichen Konzentrationen zusammen ausgewertet werden, um einen aussagekräftigen Bereich des Aggregationsprozesses abzudecken. Außerdem wurde eine deutliche Abhängigkeit der Ergebnisse für H0 und S0 von der Wellenlänge festgestellt, die für die Auswertung gewählt wurde. Dies liegt an der kleinen thermochromen Verschiebung der Monomer- und Dimer-Absorptionsbande. Die Ergebnisse der lösungsmittelabhängigen Studien zeigten, wie für den stark solvatochromen Chromophor erwartet, die größte Abweichung. Allerdings beträgt die Abweichung für G0 selbst hier nur 2.5 kJ mol1 (9%), bei Auswertung bei 491 und 549 nm, im Vergleich zur konzentrationsabhängigen Auswertung (G0 = 29.1 kJ mol1). Trotz der ausgeprägten Solvatochromie sind die lösungsmittelabhängigen Studien also geeignet, um die Bindungsstärke eines Systems abzuschätzen. Mehrmalige Wiederholung der Experimente erlaubte eine Abschätzung der Reproduzierbarkeit der Ergebnisse und möglicher Fehlerquellen. Die Ergebnisse schwankten hierbei in allen Fällen nur geringfügig (G0 < 0.4 kJ mol1) und in der gleichen Größenordnung wie der Fehler der nichtlinearen Regression. Die Erkenntnisse aus diesen Studien waren eine wichtige Grundlage für die Untersuchung eines komplexeren supramolekularen Systems in Kapitel 4. Eine einzelne Methode ist oft nicht ausreichend, um einen mehrstufigen Aggregationsprozess vollständig aufzuklären, und auch zur Aufklärung der anti-kooperativen Aggregation des chiralen Merocyanins 2, wurde eine Kombination verschiedener Techniken angewandt. Lösungsmittelabhängige UV/Vis-Absorptionsstudien in CH2Cl2/MCH Mischungen zeigten die stufenweise Zusammenlagerung der Merocyanin-Monomere (max(M) = 549 nm, CH2Cl2) zuerst durch Dipol-Dipol Wechselwirkungen zu Dimeren (max(D) = 498 nm, CH2Cl2/MCH 15:85) und dann zu größeren -Stapeln (max(H) = 477 nm, MCH) mit ausgeprägter H-Kopplung. Die thermodynamische Auswertung dieser Daten leidet allerdings unter der ausgeprägten Solvatochromie, vor allem der Monomer-Spezies (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Daher wurden stattdessen konzentrationsabhängige Studien bei verschiedenen Temperaturen durchgeführt, um den Aggregationsmechanismus aufzuklären und verlässliche thermodynamische Parameter zu bestimmen. Die Studien bei höheren Temperaturen waren notwendig, um mit den experimentellen Daten einen größeren agg--Bereich abdecken zu können. Aufgrund des ausgeprägten Unterschieds in der thermodynamischen Triebkraft für die Dimerisierung und die Bildung höherer Aggregate (KD/K5 = 6500) gibt es in MCH einen Konzentrationsbereich, in dem fast ausschließlich die dimere Spezies vorhanden ist, bevor eine weitere Zusammenlagerung durch Dispersionswechselwirkungen erfolgt. Dies ermöglichte eine unabhängige Auswertung der Daten für die beiden Aggregationsschritte. Der Zusammenschluss von Dimeren zum höheren Aggregat ließ sich nicht durch das isodesmische Modell beschreiben, sondern durch ein Pentamer-Modell. Diese Größe von etwa zehn -gestapelten PYOP-Chromophoren wurde außerdem durch AFM-, VPO- und DOSY-NMR-Messungen bestätigt. Basierend auf 1D- und 2D-NMR-Daten und dem CD-Signal des höheren Aggregats mit positivem Cotton-Effekt in Kombination mit TD-DFT Rechnungen, wurde ein P-helikaler -Stapel als Struktur angenommen. Die geringe Größe lässt sich durch den anti-kooperativen Aggregationsmechanismus und den sterischen Anspruch der lösungsvermittelnden Trialkoxyphenyl- und der chiralen Tetralin-Substituenten erklären. Die durch diese Substituenten ausgebildete aliphatische Hülle um den polaren Chromophorstapel kann außerdem die ungewöhnlich hohe Löslichkeit der Verbindung 2 in MCH erklären (> 15 mg mL1). Die detaillierte Untersuchung des Selbstorganisationsprozesses ermöglichte die Identifizierung geeigneter Bedingungen für die Untersuchung der Fluoreszenzeigenschaften der einzelnen Aggregatspezies. Für das nahezu nicht emittierende Monomer (Fl(M) = 0.23%) wurde durch zunehmende Rigidisierung im Dimer (Fl(D) = 2.3%) und im höherem Aggregat (Fl(H) = 4.5%) eine durch Aggregation induzierte Emissionssteigerung beobachtet. Die helikale Chiralität des PYOP-Decamer-Stapels führte außerdem zu einem starken CPL Signal mit einem hohen glum-Wert von 0.011. Das wichtige Fazit dieser Arbeit ist, dass sowohl temperatur- als auch lösungsmittelabhängige Studien valide Alternativen zu den klassischen konzentrationsabhängigen Untersuchungen sind, mit denen thermodynamische Parameter von Selbstorganisations-Gleichgewichten bestimmt werden können. Wobei für ein bestimmtes supramolekulares System eine der Methoden aus verschiedenen Gründen vorteilhafter sein kann als die anderen. Üblicherweise gegebene experimentelle Beschränkungen erfordern oft den kombinierten Einsatz von Techniken, um einen Selbstorganisationsprozess und die Aggregatstrukturen vollständig aufzuklären. Die anti-kooperative Merocyanin-Selbstorganisation, die hier zum ersten Mal für das PYOP-Merocyanin 2 beschrieben wurde, ist keine Ausnahme. Neben dem Interesse an den Merocyanin-Aggregaten aus struktureller und funktioneller Sicht können die aus den vorgestellten Studien gewonnenen Erkenntnisse auch auf andere Selbstassemblierungs-systeme übertragen werden und als Leitfaden für die Suche nach der am besten geeigneten Analysemethode dienen. KW - Merocyanine KW - Supramolekulare Chemie KW - Self-Assembly Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352111 ER - TY - INPR A1 - Seitz, Florian A1 - Jungnickel, Tina A1 - Kleiber, Nicole A1 - Kretschmer, Jens A1 - Dietzsch, Julia A1 - Adelmann, Juliane A1 - Bohnsack, Katherine E. A1 - Bohnsack, Markus T. A1 - Höbartner, Claudia T1 - Atomic mutagenesis of N\(^6\)-methyladenosine reveals distinct recognition modes by human m\(^6\)A reader and eraser proteins T2 - Journal of the American Chemical Society N2 - N\(^6\)-methyladenosine (m\(^6\)A) is an important modified nucleoside in cellular RNA associated with multiple cellular processes and is implicated in diseases. The enzymes associated with the dynamic installation and removal of m\(^6\)A are heavily investigated targets for drug research, which requires detailed knowledge of the recognition modes of m\(^6\)A by proteins. Here, we use atomic mutagenesis of m\(^6\)A to systematically investigate the mechanisms of the two human m\(^6\)A demethylase enzymes FTO and ALKBH5 and the binding modes of YTH reader proteins YTHDF2/DC1/DC2. Atomic mutagenesis refers to atom-specific changes that are introduced by chemical synthesis, such as the replacement of nitrogen by carbon atoms. Synthetic RNA oligonucleotides containing site-specifically incorporated 1-deaza-, 3-deaza-, and 7-deaza-m\(^6\)A nucleosides were prepared by solid-phase synthesis and their RNA binding and demethylation by recombinant proteins were evaluated. We found distinct differences in substrate recognition and transformation and revealed structural preferences for the enzymatic activity. The deaza m\(^6\)A analogues introduced in this work will be useful probes for other proteins in m\(^6\)A research. KW - modified nucleosides KW - N6-methyladenosine (m6A) KW - atomic mutagenesis KW - YTH reader proteins KW - demethylase enzymes FTO and ALKBH5 Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352376 ER - TY - JOUR A1 - Schneider, Tilman A1 - Seebauer, Florian A1 - Beuerle, Florian A1 - Würthner, Frank T1 - A monodisperse, end‐capped Ru(bda) oligomer with outstanding performance in heterogeneous electrochemical water oxidation JF - Advanced Materials Technologies N2 - AbstractWater oxidation catalysis is a key step for sustainable fuel production by water splitting into hydrogen and oxygen. The synthesis of a novel coordination oligomer based on four Ru(bda) (bda = 2,2′‐bipyridine‐6,6′‐dicarboxylate) centers, three 4,4′‐bipyridine (4,4′‐bpy) linkers, and two 4‐picoline (4‐pic) end caps is reported. The monodispersity of this tetranuclear compound is characterized by NMR techniques. Heterogeneous electrochemical water oxidation after immobilization on multi‐walled carbon nanotubes (MWCNTs) shows catalytic performance unprecedented for this compound class, with a turnover frequency (TOF) of 133 s\(^{−1}\) and a turnover number (TON) of 4.89 × 10\(^6\), at a current density of 43.8 mA cm\(^{−2}\) and a potential of 1.45 V versus normal hydrogen electrode (NHE). KW - water oxidation catalysis KW - coordination oligomers KW - electrocatalysis KW - heterogeneous catalysis KW - renew-able fuels KW - ruthenium bda complexes KW - water splitting Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-363133 SN - 2365-709X VL - 9 IS - 11 ER - TY - THES A1 - Weh, Manuel T1 - Chiral Perylene Bisimide Cyclophanes T1 - Chirale Perylenbisimidcyclophane N2 - This work illustrates how the targeted tailoring of supramolecular cavities can not only accomplish high binding due to optimized stereoelectronic shape matches between host and guest but also how molecular engineering of the binding site by a refined substitution periphery of the cavity makes enantiospecific guest recognition and host mediated chirality transfer feasible. Moreover, an enzyme mimic, following the Pauling-Jencks model of enzyme catalysis was realized by the smart design of a PBI host composed of moderately twisted chromophores, which drives the substrate inversion according to the concepts of transition state stabilization and ground state destabilization. The results of this thesis contribute to a better understanding of structure-specific interactions in host-guest complexes as well as the corresponding thermodynamic and kinetic properties and represent an appealing blueprint for the design of new artificial complex structures of high stereoelectronic shape complementarity in order to achieve the goal of sophisticated supramolecular receptors and enzyme mimicry. N2 - Diese Arbeit zeigt auf, wie durch die gezielte Konstruktion supramolekularer Kavitäten nicht nur hohe Bindungsaffinitäten aufgrund optimierter stereoelektronischer Formübereinstimmungen zwischen Wirt und Gast erreicht werden können, sondern auch, wie das molekulare Design der Bindungsstelle durch die genaue Einstellung der Substitutionsperipherie der Kavität eine enantiospezifische Gasterkennung sowie einen Wirt-vermittelten Chiralitätstransfer ermöglicht. Darüber hinaus wurde ein Enzymimitat, welches dem Pauling-Jencks-Modell der Enzymkatalyse folgt, durch das intelligente Design eines PBI-Wirts, der aus moderat verdrillten Chromophoren besteht und die Substratinversion gemäß der Konzepte der Übergangszustandsstabilisierung und Grundzustandsdestabilisierung antreibt, realisiert. Die Ergebnisse dieser Arbeit tragen zu einem besseren Verständnis der strukturspezifischen Wechselwirkungen in Wirt-Gast-Komplexen sowie der entsprechenden thermodynamischen und kinetischen Eigenschaften bei und stellen eine attraktive Blaupause für das Design neuer künstlicher Komplexsysteme mit hoher stereoelektronischer Formkomplementarität dar, um das Ziel hochentwickelter supramolekularer Rezeptoren sowie Enzym-ähnlicher Katalyse zu realisieren. KW - host-guest KW - cyclophane KW - Host-Guest Chemistry Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-315296 ER - TY - THES A1 - Swain, Asim T1 - Helically Twisted Graphene Nanoribbons: Bottom-up Stereospecific Synthesis and Characterization T1 - Helikal verdrehte Graphen-Nanoribbons: Bottom-up stereospezifische Synthese und Charakterisierung N2 - Over the past decade, substantial progress has been made in synthesizing atomically precise carbon nanostructures, with a focus on graphene nanoribbons (NRs) through advanced synthetic techniques. Despite these advancements, precise control over the stereochemistry of twisted NRs remains challenging. This thesis introduces a strategic approach to achieve absolute control over the single-handed helical conformation in a cove-edged NR, utilizing enantiopure [n]helicenes as a molecular wrench to intricately dictate the overall conformation of the NR. Enantiopure [7]helicenes were stitched to the terminal K-regions of a conjugated pyrene NR using a stereospecific and site-selective palladium(II)-catalyzed annulative π-extension (APEX) reaction, resulting in a helically twisted NR with an end-to-end twist of 171°, the second-largest twist reported so far in the literature for twistacenes. The helical end-to-end twist increases with each addition of benzene ring to the central acene core, suggesting that the extra strain induced by the terminal [7]helicenes maintains such a high level of twist. The quantum chemical calculations were conducted to investigate the impact of twisting on the conformational population. At room temperature, the central backbone of the nanoribbon adopts the twisted helicity opposite to that of the attached [7]helicene, constituting around 99% of the molecular population. For instance, (P)-[7]helicenes produce a left-handed helical nanoribbon, while (M)-[7]helicenes produce a right-handed helical nanoribbon. In the presence of helicenes of opposite chirality, the nanoribbon adopts a waggling conformation. The helically twisted nanoribbons are conformationally robust, as variable temperature chiroptical measurements showed no change in CD and CPL spectra. The proposed strategy, involving the late-stage addition of [n]helicene units through the APEX reaction, appears promising for streamlining the synthesis of diverse cove edge NR variants with desired conformations. In addition to single-handed helically twisted nanoribbons, the symmetry-based functional properties of C2 and C1 symmetric pyrene-fused single and double [n]helicene compounds were studied. Owing to its higher structural rigidity, the C1 symmetric heptagonal ring-containing molecules exhibited exceptional configurational stability along with remarkable chiroptical properties compared to their C2 symmetric as well as pristine helicene congeners. N2 - In den letzten zehn Jahren wurden erhebliche Fortschritte bei der Synthese von atomar präzisen Kohlenstoffnanostrukturen erzielt, bei denen der Schwerpunkt durch verbesserte synthetische Methoden auf Graphen-Nanoribbons (NRs) lag. Trotz dieser Fortschritte bleibt die Kontrolle über die Stereochemie verdrehter NRs eine Herausforderung. Diese Dissertation stellt einen strategischen Ansatz vor, um absolute Kontrolle über die einhändig-helikale Konformation in einem cove-edged NR zu erreichen. Dabei werden enantiomerenreine [n]Helicene als molekulare Werkzeuge verwendet, um die Gesamtkonformation des NR präzise zu steuern. Enantiomerenreine [7]Helicene wurden mittels einer stereospezifischen und ortsselektiven Palladium(II)-katalysierten annulativen π-Erweiterungsreaktion (APEX) an die terminalen K-Regionen eines konjugierten Pyren-NR gebunden. Dies führte zu einem helikal-verdrehten NR mit einer End-zu-End-Windung von 171°, der zweithöchsten bisher in der Literatur für Twistacene berichteten Windung. Die helikale End-zu-End-Windung nimmt mit jeder Erweiterung um einen Benzolring zum zentralen Acenekern zu, was darauf hindeutet, dass die durch die terminalen [7]Helicene induzierte zusätzliche Spannung ein solch hohes Maß an Windung aufrechterhält. Quantenchemischen Berechnungen wurden durchgeführt, um den Einfluss der Verdrehung auf die konformationelle Population zu untersuchen. Bei Raumtemperatur nimmt das zentrale Rückgrat des Nanoribbons die entgegengesetzte Helizität zu der der angefügten [7]Helicene an, was etwa 99 % der molekularen Population ausmacht. Beispielsweise erzeugen (P)-[7]Helicene ein linkshändig-helikales Nanoribbon, während (M)-[7]Helicene ein rechtshändig-helikales Nanoribbon erzeugen. In Gegenwart von Helicenen entgegengesetzter Chiralität nimmt das Nanoribbon eine waggling-Konformation an. Die helikal-verdrehten Nanoribbons sbesitzen eine robuste Konformation, da chiroptische Messungen bei variablen Temperaturen keine Veränderung in den CD- und CPL-Spektren zeigten. Der vorgeschlagene Ansatz, der die Erweiterung durch [n]Helicen-Einheiten mithilfe der APEX-Reaktion umfasst, scheint vielversprechend für die Vereinfachung der Synthese verschiedener cove-edged NR-Varianten mit gewünschten Konformationen. Neben einhändig helikal-verdrehten Nanoribbons wurden die symmetriebasierten funktionellen Eigenschaften von C2- und C1-symmetrischen Pyren-gebundenen Einzel- und Doppel-[n]Helicenverbindungen untersucht. Aufgrund ihrer höheren strukturellen Rigidität zeigten die C1-symmetrischen heptagonalen Ringverbindungen außergewöhnliche hohe Konfigurationsstabilität sowie bemerkenswerte chiroptische Eigenschaften im Vergleich zu ihren C2-symmetrischen sowie reinen Helicen-Kongeneren. KW - Helicene KW - Pyren KW - Nanoribbon KW - Chirality KW - Acenes KW - Pyrene Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-360164 ER -