TY - JOUR A1 - Ohlmann, Brigitte A1 - Bömicke, Wolfgang A1 - Behnisch, Rouven A1 - Rammelsberg, Peter A1 - Schmitter, Marc T1 - Variability of sleep bruxism — findings from consecutive nights of monitoring JF - Clinical Oral Investigations N2 - Objectives To determine sleep bruxism (SB) behavior during five consecutive nights and to identify correlations between SB episodes per hour (SB index) and sleep-time masseter-muscle activity (sMMA). Material and methods Thirty-one participants were included in the study. Of these, 10 were classified as sleep bruxers (group SB-1) and nine as non-sleep bruxers (group non-SB). The bruxism status of these 19 patients was identified by means of questionnaires, an assessment of clinical symptoms, and electromyographic/electrocardiographic data (Bruxoff® device). The remaining 12 participants were also identified as bruxers, but based exclusively on data from the Bruxoff device (group SB-2). Data analysis included descriptive statistics and Spearman’s correlation to assess the relationship between the SB index and sMMA. Results Participants in group SB-1 showed an overall mean SB index of 3.1 ± 1.6 and a mean total sMMA per night of 62.9 ± 38.3. Participants in group SB-2 had an overall mean SB index of 2.7 ± 1.5 and a mean total sMMA of 56.0 ± 29.3. In the non-SB group, participants showed an overall mean SB index of 0.8 ± 0.5 and a mean total sMMA of 56.8 ± 30.3. Spearman’s correlation yielded values of − 0.27 to 0.71 for the correlation between sMMA and SB index. Conclusions The data revealed variable SB activity and the absence of a reliable correlation between sMMA and the SB index. Clinical relevance The high variation in SB activity and lack of correlation between sMMA and the SB index should be considered when diagnosing SB. Trial registration Clinical Trials [NIH], clinical trial no. NCT03039985. KW - sleep bruxism KW - fluctuation KW - electromyography KW - electrocardiography KW - portable Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-307645 SN - 1436-3771 VL - 26 IS - 4 ER - TY - JOUR A1 - Winter, Anna A1 - Schulz, Stefan M. A1 - Schmitter, Marc A1 - Müller-Richter, Urs A1 - Kübler, Alexander A1 - Kasper, Sylvia A1 - Hartmann, Stefan T1 - Comprehensive geriatric assessment and quality of life aspects in patients with recurrent/metastatic head and neck squamous cell carcinoma (HNSCC) JF - Journal of Clinical Medicine N2 - To define frailty in older cancer patients, the aim of this study was to assess the geriatric status and quality of life (QoL) aspects in patients suffering from recurrent/metastatic head and neck squamous cell carcinoma (r/m HNSCC) under palliative treatment. A comprehensive geriatric assessment (CGA) was performed on 21 r/m HNSCC patients at two defined assessments, and the QoL aspects and the impact of descriptive data were evaluated. The Kolmogorov–Smirnov test, Spearman’s rho correlation, and two-way mixed ANOVA were used for statistical analysis. All patients were found to be “frail”. Pain, fatigue, and the burden of illness were the highest-rated symptoms. Oral function and orofacial appearance were highly impaired. A significant impact of descriptive data on the CGA and QoL results was found (all p ≤ 0.05). Thus, the CGA results revealed high frailty, severe comorbidities, and high impairments in QoL aspects. The CGA and QoL results were negatively affected by the primary HNSCC treatment approach, the need for prosthetic treatment, and worse oral functional capacity. Therefore, frailty in r/m HNSCC patients seems to be multidimensional. The evaluation of the CGA and QoL aspects in r/m HNSCC patients can be recommended to detect special needs, organize aftercare, and improve the support for frail and vulnerable cancer patients to create a multidisciplinary treatment approach. KW - frailty KW - geriatric cancer patient KW - recurrent/metastatic head and neck squamous cell carcinoma KW - oral health-related quality of life KW - prosthetic rehabilitation KW - oral functional capacity Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-363096 SN - 2077-0383 VL - 12 IS - 17 ER - TY - JOUR A1 - Kunz, Felix A1 - Stellzig-Eisenhauer, Angelika A1 - Boldt, Julian T1 - Applications of artificial intelligence in orthodontics — an overview and perspective based on the current state of the art JF - Applied Sciences N2 - Artificial intelligence (AI) has already arrived in many areas of our lives and, because of the increasing availability of computing power, can now be used for complex tasks in medicine and dentistry. This is reflected by an exponential increase in scientific publications aiming to integrate AI into everyday clinical routines. Applications of AI in orthodontics are already manifold and range from the identification of anatomical/pathological structures or reference points in imaging to the support of complex decision-making in orthodontic treatment planning. The aim of this article is to give the reader an overview of the current state of the art regarding applications of AI in orthodontics and to provide a perspective for the use of such AI solutions in clinical routine. For this purpose, we present various use cases for AI in orthodontics, for which research is already available. Considering the current scientific progress, it is not unreasonable to assume that AI will become an integral part of orthodontic diagnostics and treatment planning in the near future. Although AI will equally likely not be able to replace the knowledge and experience of human experts in the not-too-distant future, it probably will be able to support practitioners, thus serving as a quality-assuring component in orthodontic patient care. KW - orthodontics KW - artificial intelligence KW - machine learning KW - deep learning KW - cephalometry KW - age determination by skeleton KW - tooth extraction KW - orthognathic surgery Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-310940 SN - 2076-3417 VL - 13 IS - 6 ER - TY - JOUR A1 - Schmitter, Marc A1 - Bömicke, Wolfgang A1 - Behnisch, Rouven A1 - Lorenzo Bermejo, Justo A1 - Waldecker, Moritz A1 - Rammelsberg, Peter A1 - Ohlmann, Brigitte T1 - Ceramic crowns and sleep bruxism: first results from a randomized trial JF - Journal of Clinical Medicine N2 - Background: This randomized clinical trial was conducted to assess whether sleep bruxism (SB) is associated with an increased rate of technical complications (ceramic defects) in lithium disilicate (LiDi) or zirconia (Z) molar single crowns (SCs). Methods: Adult patients were classified as affected or unaffected by SB based on structured questionnaires, clinical signs, and overnight portable electromyography (BruxOff) and block randomized into four groups according to SB status and crown material (LiDi or Z): LiDi-SB (n = 29), LiDi-no SB (n = 24), Z-SB (n = 23), and Z-no SB (n = 27). Differences in technical complications (main outcome) and survival and success rates (secondary outcomes) one year after crown cementation were assessed using Fisher’s exact test with significance level α = 0.05. Results: No technical complications occurred. Restoration survival rates were 100% in the LiDi-SB and LiDi-no SB groups, 95.7% in the Z-SB group, and 96.3% in the Z-no SB group (p > 0.999). Success rates were 96.6% in the LiDi-SB group, 95.8% in the LiDi-no SB group (p > 0.999), 91.3% in the Z-SB group, and 96.3% in the Z-no SB group (p ≥ 0.588). Conclusions: With a limited observation time and sample size, no effect of SB on technical complication, survival, and success rates of molar LiDi and Z SCs was detected. KW - bruxism KW - cad-cam KW - ceramics KW - clinical studies/trials KW - prosthetic dentistry/prosthodontics KW - clinical outcomes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-301480 SN - 2077-0383 VL - 12 IS - 1 ER - TY - JOUR A1 - Kauffmann, Frederic A1 - Höhne, Christian A1 - Assaf, Alexandre Thomas A1 - Vollkommer, Tobias A1 - Semmusch, Jan A1 - Reitmeier, Aline A1 - Stein, Jamal Michel A1 - Heiland, Max A1 - Smeets, Ralf A1 - Rutkowski, Rico T1 - The influence of local pamidronate application on alveolar dimensional preservation after tooth extraction — an animal experimental study JF - International Journal of Molecular Sciences N2 - The aim of this randomized, controlled animal exploratory trial was to investigate the influence of local application of aminobisphosphonate pamidronate during the socket preservation procedure. Mandibular premolars were extracted in five Göttingen minipigs. Two animals underwent socket preservation using BEGO OSS (n = 8 sockets) and three animals using BEGO OSS + Pamifos (15 mg) (n = 12 sockets). After jaw impression, cast models (baseline, eight weeks postoperative) were digitized using an inLab X5 scanner (Dentsply Sirona) and the generated STL data were superimposed and analyzed with GOM Inspect 2018 (GOM, Braunschweig). After 16 weeks, the lower jaws were prepared and examined using standard histological methods. In the test group (BEGO OSS + pamidronate), buccooral dimensional loss was significantly lower, both vestibulary (−0.80 ± 0.57 mm vs. −1.92 ± 0.63 mm; p = 0.00298) and lingually (−1.36 ± 0.58 mm vs. −2.56 ± 0.65 mm; p = 0.00104) compared with the control group (BEGO OSS). The test group showed a significant difference between vestibular and lingual dimensional loss (p = 0.04036). Histology showed cortical and cancellous bone in the alveolar sockets without signs of local inflammation. Adjuvant application of pamidronate during socket preservation reduces alveolar dimensional loss significantly. Further investigations with regard to dose–response relationships, volume effects, side effects, and a verification of the suitability in combination with other bone substitute materials (BSMs) are necessary. KW - pamidronate KW - socket preservation KW - ridge preservation KW - bone remodeling KW - bone regeneration KW - bisphosphonates Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285173 SN - 1422-0067 VL - 21 IS - 10 ER - TY - JOUR A1 - Linz, Christian A1 - Faber, Julian A1 - Schmid, Reiner A1 - Kunz, Felix A1 - Böhm, Hartmut A1 - Hartmann, Stefan A1 - Schweitzer, Tilmann T1 - Using a 3D asymmetry index as a novel form for capturing complex three-dimensionality in positional plagiocephaly JF - Scientific Reports N2 - Positional plagiocephaly (PP) is the most common skull deformity in infants. Different classification systems exist for graduating the degree of PP, but all of these systems are based on two-dimensional (2D) parameters. This limitation leads to several problems stemming from the fact that 2D parameters are used to classify the three-dimensional (3D) shape of the head. We therefore evaluate existing measurement parameters and validate a newly developed 3D parameter for quantifying PP. Additionally, we present a new classification of PP based on a 3D parameter. 210 patients with PP and 50 patients without PP were included in this study. Existing parameters (2D and 3D) and newly developed volume parameters based on a 3D stereophotogrammetry scan were validated using ROC curves. Additionally, thresholds for the new 3D parameter of a 3D asymmetry index were assessed. The volume parameter 3D asymmetry index quantifies PP equally as well as the gold standard of 30° diagonal difference. Moreover, a 3D asymmetry index allows for a 3D-based classification of PP. The 3D asymmetry index can be used to define the degree of PP. It is easily applicable in stereophotogrammetric datasets and allows for comparability both intra- and inter-individually as well as for scientific analysis. KW - craniofacial orthodontics KW - physical examination KW - three-dimensional imaging Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300427 VL - 12 ER - TY - JOUR A1 - Schneider, Sonja Jasmin Maria A1 - Höhne, Christian A1 - Schneider, Martin A1 - Schmitter, Marc T1 - Photoacoustic tomography versus cone-beam computed tomography versus micro-computed tomography: Accuracy of 3D reconstructions of human teeth JF - PloS One N2 - Objectives In this in-vitro study, teeth were imaged using photoacoustic tomography (PAT), cone-beam computed tomography (CBCT), and micro-computed tomography (μ-CT). The study had aim: to identify the best wavelength for PAT images to determine the accuracy of the three imaging methods, and to determine whether PAT images of teeth can achieve acceptable reconstruction quality. Methods Nineteen human mandibular single-rooted incisors were extracted from patients with trauma or periodontitis. To determine the best wavelength for acquiring photoacoustic images, all 19 teeth were scanned in vitro with PAT, using different laser wavelengths between 680 and 960 nm. The images were analyzed using image analysis software. To assess the accuracy of PAT and compare it with the accuracy of CBCT, each tooth was also scanned in vitro using CBCT and the reference standard technique of μ-CT. Subsequently, three different three-dimensional models, one for each imaging technique, were created for each tooth. Finally, the three different three-dimensional models acquired for the same tooth were matched and analyzed regarding volume and surface. Results The highest quality tooth images were achieved using the 680 nm wavelength, which showed the best contrast ratio. The full geometry of the dental root (μ-CT compared with PAT) could be visualized with relative standard deviations of 0.12 mm for the surface and −7.33 mm3 for the volume (n = 19). The full geometry of the dental root (μ-CT compared with CBCT) could be visualized with relative standard deviations of 0.06 mm for the surface and −14.56 mm3 for the volume (n = 19). The difference between the PAT–μ-CT group and CBCT–μ-CT group regarding the total average of the root surface area was not significant (p>0.06). Conclusion Images, which were acquired using PAT at 680nm showed the best contrast ration, enabling the identification of dentin, cementum and the dental pulp. No significant differences were found between the PAT–μ-CT group and CBCT–μ-CT group regarding the total average of the RSA and the total volume. Thus, three-dimensional reconstructions based on in-vitro PAT are already of acceptable reconstruction quality. KW - teeth KW - imaging techniques KW - computer software KW - incisors KW - in vivo imaging KW - caries KW - magnetic resonance imaging KW - tomography Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-301437 VL - 17 IS - 12 ER - TY - JOUR A1 - Winter, Anna A1 - Schulz, Stefan M. A1 - Schmitter, Marc A1 - Brands, Roman C. A1 - Straub, Anton A1 - Kübler, Alexander A1 - Borgmann, Anna A1 - Hartmann, Stefan T1 - Oral-health-related quality of life in patients with medication-related osteonecrosis of the jaw: a prospective clinical study JF - International Journal of Environmental Research and Public Health N2 - Medication-related osteonecrosis of the jaw (MRONJ) represents an adverse side effect of antiresorptive and antiangiogenic medications. It is associated with impaired quality of life, oral health, and oral function and can be classified into various stages. The purpose of this prospective clinical study is to evaluate the impact of stages I and II MRONJ on oral-health-related quality of life (OHRQoL) and related parameters. Patients’ OHRQoL, satisfaction with life, oral discomfort, and oral health were assessed using the German version of the Oral Health Impact Profile (OHIP-G49), visual analog scales (VAS), and Satisfaction with Life Scale (SWLS) at baseline (T0), 10 days (T1), and 3 months after treatment (T2) in 36 patients. Data were analyzed using Kolmogorov–Smirnov test, two-way mixed ANOVAs, and follow-up Mann–Whitney U tests. The impact of treatment effects on the original seven OHIP domain structures and the recently introduced four-dimensional OHIP structure were evaluated using linear regression analysis. Thirty-six patients received surgical MRONJ treatment. Before treatment, patients’ perceived OHRQoL, oral discomfort, oral health, and satisfaction with life were negatively affected by MRONJ. Surgical treatment significantly improved OHRQoL and related parameters (all p ≤ 0.012). This improvement was greater in patients with higher impairment at T0. OHRQoL and oral restrictions were still impaired after treatment in patients who needed prosthetic treatment. The four-dimensional structure revealed valuable information beyond the standard seven OHIP domains. Increased awareness of MRONJ risks and an interdisciplinary treatment approach for MRONJ patients are needed. KW - oral-health-related quality of life KW - satisfaction with life KW - oral health KW - medication-related osteonecrosis of the jaw KW - treatment benefit KW - OHIP-49 KW - SWLS Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-288141 SN - 1660-4601 VL - 19 IS - 18 ER - TY - JOUR A1 - Glöggler, Julia C. A1 - Hellmann, Daniel A1 - Von Manstein, Maja A1 - Jäger, Rudolph A1 - Repky, Stefan A1 - Beyersmann, Jan A1 - Lapatki, Bernd G. T1 - Motor learning might contribute to a therapeutic anterior shift of the habitual mandibular position—An exploratory study JF - Journal of Oral Rehabilitation N2 - Background Passive mandibular advancement with functional appliances is commonly used to treat juvenile patients with mandibular retrognathism. Objective The aim of this study was to investigate whether active repetitive training of the mandible into an anterior position would result in a shift of the habitual mandibular position (HMP). Methods Twenty adult healthy subjects were randomly assigned to one of two groups: a training group receiving six supervised functional training sessions of 10 min each and a control group without training. Bonded lateral biteplates disengaged occlusion among both groups throughout the 15‐day experiment. Customised registration‐training appliances consisted of a maxillary component with an anterior plane and a mandibular component with an attached metal sphere. Training sessions consisted of repeated mouth‐opening/closing cycles (frequency: 30/min) to hit an anteriorly positioned hemispherical target notch with this metal sphere. The HMP was registered at defined times during the experiment. Results The HMP in the training group showed a statistically significant anterior shift of 1.6 mm (interquartile range [IQR]: 1.2 mm), compared with a significant posterior shift of −0.8 mm (IQR: 2.8 mm) in the control group (p < .05). Although the anterior shift among the training group showed a partial relapse 4 days after the first training block, it then advanced slightly in the 4‐day interval after the second training block, which might indicate neuroplasticity of the masticatory motor system. Conclusions Motor learning by repetitive training of the mandible into an anterior position might help to improve the results of functional appliance therapy among patients with mandibular retrognathism. KW - mandibular advancement KW - mandibular shift KW - masticatory system KW - motor training KW - mandibular resting position KW - habitual mandibular position KW - masticatory muscles KW - motor skill learning Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-262644 VL - 48 IS - 8 SP - 891 EP - 900 ER - TY - JOUR A1 - Fadillioglu, Cagla A1 - Kanus, Lisa A1 - Möhler, Felix A1 - Ringhof, Steffen A1 - Schindler, Hans J. A1 - Stein, Thorsten A1 - Hellmann, Daniel T1 - Influence of controlled masticatory muscle activity on dynamic reactive balance JF - Journal of Oral Rehabilitation N2 - Background The influence of the stomatognatic system on human posture control has been investigated under static conditions, but the effects on dynamic balance have not yet been considered. Objective Investigating the influence of different functional stomatognatic activities (jaw clenching (JAW), tongue pressing (TON) and habitual jaw position (HAB)) on postural performance during a dynamic reactive balance task. Methods Forty‐eight physically active and healthy adults were assigned to three groups differing in oral‐motor tasks (JAW, TON or HAB). Dynamic reactive balance was assessed by an oscillating platform which was externally perturbed in four directions. Performance was quantified by means of Lehr's damping ratio. Mean speeds of the selected anatomical regions (head, trunk, pelvis, knee and foot) were analysed to determine significant performance differences. Results The groups differed significantly in balance performance in direction F (i.e., forwards acceleration of the platform). Post hoc tests revealed that the JAW group had significantly better performance compared with both the HAB and TON groups. Better performance was associated with a decreased mean speed of the analysed anatomical regions. Conclusion JAW can improve dynamic reactive balance but the occurrence of positive effects seems to be task‐specific and not general. TON seems not to have any observable effects on dynamic reactive balance performance, at least when evaluating it with an oscillating platform. JAW might be a valuable strategy which could possibly reduce the risk of falls in elderly people; however, further investigations are still needed. KW - jaw clenching KW - perturbation KW - postural control KW - posturomed KW - stomatognatic system KW - tongue pressing Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-262436 VL - 49 IS - 3 SP - 327 EP - 336 ER - TY - JOUR A1 - Brandt, Silvia A1 - Lauer, Hans-Christoph A1 - Fehrenz, Michael A1 - Güth, Jan-Frederik A1 - Romanos, Georgios A1 - Winter, Anna T1 - Ball versus Locator\(^®\) attachments: a retrospective study on prosthetic maintenance and effect on oral-health-related quality of life JF - Materials N2 - Locator\(^®\) and ball attachments are well-established systems to attach overdentures to two inter-foraminal implants. This study aimed to evaluate differences between the two systems regarding prosthetic maintenance and patients’ oral-health-related quality of life (OHRQoL). Dental records of patients with a mandibular implant-retained overdenture were retrospectively analyzed. Prosthetic maintenance measures involving the denture suprastructure and attachment matrix and patrix were analyzed. Furthermore, the Oral Health Impact Profile-G14 (OHIP-G14) was used to evaluate OHRQoL. Results were analyzed by means of Kaplan–Meier analysis and Student’s t- and log-rank tests. The records of 122 patients were evaluated. Kaplan–Meier survival analysis revealed a significant difference between ball attachments (Group B; n patients = 47) and Locator\(^®\) attachments (Group L; n patients = 75) regarding the occurrence of denture fractures (p < 0.001) and events affecting the matrix (p = 0.028) and patrix (p = 0.030). Group L had a significantly lower total OHIP-G14 score than Group B (p = 0.002). The most common maintenance events were matrix-related and denture relining for both attachment systems. Group B required more maintenance measures than Group L. Moreover, patients in Group L had better OHRQoL than patients in Group B. KW - attachment KW - ball KW - locator KW - overdenture KW - OHRQoL KW - OHIP-G14 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-228909 SN - 1996-1944 VL - 14 IS - 4 ER - TY - JOUR A1 - Ohlmann, Brigitte A1 - Waldecker, Moritz A1 - Leckel, Michael A1 - Bömicke, Wolfgang A1 - Behnisch, Rouven A1 - Rammelsberg, Peter A1 - Schmitter, Marc T1 - Correlations between sleep bruxism and temporomandibular disorders JF - Journal of Clinical Medicine N2 - The aim of this study was to identify correlations between sleep bruxism (SB) and temporomandibular disorders (TMD) as diagnosed by means of the research diagnostic criteria for temporomandibular disorders (RDC/TMD). Sleep bruxism was diagnosed on the basis of I) validated questionnaires, II) clinical symptoms, and III) electromyographic/electrocardiographic data. A total of 110 subjects were included in the study. Fifty-eight patients were identified as bruxers and 52 as nonbruxers. A psychosocial assessment was also performed. An RDC/TMD group-I diagnosis (myofascial pain) was made for 10 out of 58 bruxers, whereas none of the nonbruxers received a diagnosis of this type. No significant differences were found between bruxers and nonbruxers with regard to RDC/TMD group-II (disc displacement) and group-III (arthralgia, arthritis, arthrosis) diagnoses. Somatization was significantly more common among bruxers than nonbruxers. Multivariate logistic regression analysis revealed that somatization was the only factor significantly correlated with the diagnosis of myofascial pain. The results of this study indicate a correlation between myofascial pain, as diagnosed using the RDC/TMD, and somatization. It seems that somatization is a stronger predictor of an RDC/TMD diagnosis of myofascial pain than sleep bruxism is. KW - sleep bruxism KW - TMD KW - electromyographic/electrocardiographic data Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200662 SN - 2077-0383 VL - 9 IS - 2 ER - TY - JOUR A1 - Höhne, Christian A1 - Schwarzbauer, Raphael A1 - Schmitter, Marc T1 - Introduction of a new teaching concept for crown preparation with 3D printed teeth JF - European Journal of Dental Education N2 - Introduction For both students and teachers, it is challenging to learn and teach a correct crown preparation. The purpose of this study was the design, feasibility and evaluation of a 3D printed tooth model with internal preparation for dental education in crown preparation and to analyse the quality of the prepared printed teeth in comparison with prepared standard model teeth. Materials and methods A printable tooth was designed and printed by a stereolithographic printer. 38 fourth‐year dental students in the first clinical course in prosthodontics were trained in a voluntary course using printed teeth. Different aspects of the printed tooth were evaluated by a questionnaire using German school grades (1 best to 5 worst). The quality of the preparation with the printed teeth and standard training teeth was also rated in an evaluation form done by an expert group consisting of five experienced dentists. Results The workflow was feasible and cost‐effective for the production of the teeth. The overall rating of the printed tooth was Ø 2.0 ± 0.34 in the questionnaire completed by the students. The students rated the printed tooth model (Ø 2.1 ± 0.85) as significantly better than the standard model tooth (Ø 3.3 ± 0.77; P = .000). The students reported great benefits in the use of this model tooth, for example valuable replacement of a standard model and real teeth, direct control of material loss. The quality of the preparation was evaluated by the expert group as significantly better with an overall mean grade of Ø 2.6 ± 0.37 for the printed teeth compared to Ø 2.9 ± 0.42 for the standard model teeth (P = .000). Conclusions The feasibility of this teaching concept was confirmed. The students favoured to work on the innovative 3D‐teeth with internal preparation, emphasising the usefulness of this technique in dental education. The expert group confirmed also the significant training effect of this tooth model in contrast to a standard model tooth. KW - 3D printing KW - additive manufacturing KW - clinical practice KW - dental education KW - printed tooth KW - student training Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-218133 VL - 24 IS - 3 SP - 526 EP - 534 ER - TY - JOUR A1 - Kunz, Felix A1 - Kayserili, Hülya A1 - Midro, Alina A1 - de Silva, Deepthi A1 - Basnayake, Sriyani A1 - Güven, Yeliz A1 - Borys, Jan A1 - Schanze, Denny A1 - Stellzig‐Eisenhauer, Angelika A1 - Bloch‐Zupan, Agnes A1 - Zenker, Martin T1 - Characteristic dental pattern with hypodontia and short roots in Fraser syndrome JF - American Journal of Medical Genetics Part A N2 - Fraser syndrome (FS) is a rare autosomal recessive multiple congenital malformation syndrome characterized by cryptophthalmos, cutaneous syndactyly, renal agenesis, ambiguous genitalia, and laryngotracheal anomalies. It is caused by biallelic mutations of FRAS1, FREM2, and GRIP1 genes, encoding components of a protein complex that mediates embryonic epithelial–mesenchymal interactions. Anecdotal reports have described abnormal orodental findings in FS, but no study has as yet addressed the orodental findings of FS systematically. We reviewed dental radiographs of 10 unrelated patients with FS of different genetic etiologies. Dental anomalies were present in all patients with FS and included hypodontia, dental crowding, medial diastema, and retained teeth. A very consistent pattern of shortened dental roots of most permanent teeth as well as altered length/width ratio with shortened dental crowns of upper incisors was also identified. These findings suggest that the FRAS1–FREM complex mediates critical mesenchymal–epithelial interactions during dental crown and root development. The orodental findings of FS reported herein represent a previously underestimated manifestation of the disorder with significant impact on orodental health for affected individuals. Integration of dentists and orthodontists into the multidisciplinary team for management of FS is therefore recommended. KW - dental roots KW - Fraser syndrome KW - hypodontia KW - orodental health KW - taurodontism Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-216147 VL - 182 IS - 7 SP - 1681 EP - 1689 ER - TY - JOUR A1 - Şen, Sinan A1 - Orhan, Gül A1 - Sertel, Serkan A1 - Schmitter, Marc A1 - Schindler, Hans J. A1 - Lux, Christopher J. A1 - Giannakopoulos, Nikolaos Nikitas T1 - Comparison of acupuncture on specific and non‐specific points for the treatment of painful temporomandibular disorders: A randomised controlled trial JF - Journal of Oral Rehabilitation N2 - Background and Objective The aim of this single‐centre, two‐arm, parallel‐group, double‐blinded, randomised controlled trial was to investigate the disputed specific effectiveness of acupuncture by comparing acupuncture on specific and non‐specific points among patients with non‐chronic, painful TMDs. Methods Following predefined eligibility criteria, 49 consecutive patients of both sexes were recruited to the study. All subjects were diagnosed with a non‐chronic (Graded Chronic Pain Scale grade <3) painful TMD, as assessed using the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD). Patients were randomly assigned to group A (acupuncture on specific points) or group B (acupuncture on non‐specific points) after the initial examination (T0). Both acupuncture treatment sessions were conducted by a trained dentist once a week for four weeks. The examination was repeated five weeks (T5) after T0 by one calibrated examiner who was unaware of the study groups. Characteristic pain intensity (CPI) was evaluated as the main outcome criterion and compared between times and treatment groups by means of non‐parametric tests (significance level set at P = .05). Secondary outcomes comprised the maximum corrected active mouth‐opening without pain (MAO); patients’ expectations regarding acupuncture treatment and pain development; depressivity; and oral health‐related quality of life (OHRQoL). Results A total of 41 patients (38 female) successfully completed the study (mean age: 40.17 ± 16.61). The two groups did not differ significantly at any time in terms of age and CPI. However, CPI was significantly (P < .05) lower at T5 than at T0 for both groups (29.66 and 30.35% lower in group A and group B, respectively). An increase in MAO was observed at T5 for both groups but was significant for group B only (P = .016). All patients had positive expectations of acupuncture therapy, and the two groups did not differ significantly at T5 with regard to the extent to which their expectations had been fulfilled by the treatment (P = .717). Comparison of T0 and T5 showed a statistically significant reduction of depressivity for group A (P = .0205), but no significant change for group B (P = .329). At T5, OHRQoL had improved significantly for both groups (group A, P = .018; group B, P < .001) compared with at T0. Conclusions Acupuncture on both specific and non‐specific points reduces the non‐dysfunctional pain of TMD patients. The effect of acupuncture on painful TMD cannot be attributed to the specific point selection. KW - acupuncture KW - effectiveness KW - oro‐facial pain KW - randomised controlled trial KW - temporomandibular disorders Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215419 VL - 47 IS - 7 SP - 783 EP - 795 ER - TY - JOUR A1 - Höhne, Christian A1 - Dickhaut, Nora A1 - Schmitter, Marc T1 - Introduction of a new teaching concept for dentin post preparation with 3D printed teeth JF - European Journal of Dental Education N2 - Introduction The preparation for dentin posts is difficult and hard to learn. There are currently no reproducible simulation models to train this clinical procedure. The purpose of this study was the design, feasibility and evaluation of a three‐dimensional (3D) printed tooth model for the pre‐clinical teaching of students. Materials and methods A printable tooth was designed and printed by a stereolithographic printer. A total of 48 fourth‐year dental students in the first clinical course in prosthodontics were trained in a voluntary hands‐on course on 4 similar printed teeth. The students used standard model teeth and real‐teeth models during their education. They had experience in caries removement and root canal treatment on real patients. Root perforations were counted for every attempt. The different benefits of the 3D printed tooth were evaluated by a questionnaire using German school grades from 1 (best) to 6 (worst). Results The overall rating of the printed tooth was Ø1.9 ± 0.3. The item “suitable exercise option” was rated Ø2.0 ± 0.8, and the teeth were “easy to use” Ø1.9 ± 0.9. The item “realistic approach to dentin post preparation” was rated Ø2.1 ± 0.8, and the teeth showed the “shortcomings at a root perforation” Ø1.5 ± 0.6. The students reported to have much more motivation and enthusiasm to improve their skills with the printed teeth Ø2.1 ± 0.9. They had a strong desire to include these teeth in their pre‐clinical education before the first patient treatment Ø1.6 ± 0.8. The success rate of the dentin post preparation was significantly better for the second 25% (P = .047) and fourth 48% (P = .04) attempt. Conclusions The feasibility of this teaching concept was confirmed. The students had the possibility to learn a correct dentin post preparation on a printed tooth model. The learning effect with this tooth model was rated as good to very good by the questionnaire. KW - 3D printing KW - additive manufacturing KW - CAD KW - CAM KW - clinical practice KW - dental education KW - dentin post KW - printed tooth KW - rapid prototyping KW - stereolithography KW - student training Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215586 VL - 24 IS - 3 SP - 499 EP - 506 ER - TY - JOUR A1 - Faggion, Clovis Mariano, Jr. A1 - Apaza, Karol A1 - Ariza-Fritas, Tania A1 - Málaga, Lilian A1 - Giannakopoulos, Nikolaos Nikitas A1 - Alarcón, Marco Antonio T1 - Methodological quality of consensus guidelines in implant dentistry JF - PLOS One N2 - Background: Consensus guidelines are useful to improve clinical decision making. Therefore, the methodological evaluation of these guidelines is of paramount importance. Low quality information may guide to inadequate or harmful clinical decisions. Objective: To evaluate the methodological quality of consensus guidelines published in implant dentistry using a validated methodological instrument. Methods: The six implant dentistry journals with impact factors were scrutinised for consensus guidelines related to implant dentistry. Two assessors independently selected consensus guidelines, and four assessors independently evaluated their methodological quality using the Appraisal of Guidelines for Research & Evaluation (AGREE) II instrument. Disagreements in the selection and evaluation of guidelines were resolved by consensus. First, the consensus guidelines were analysed alone. Then, systematic reviews conducted to support the guidelines were included in the analysis. Non-parametric statistics for dependent variables (Wilcoxon signed rank test) was used to compare both groups. Results: Of 258 initially retrieved articles, 27 consensus guidelines were selected. Median scores in four domains (applicability, rigour of development, stakeholder involvement, and editorial independence), expressed as percentages of maximum possible domain scores, were below 50% (median, 26%, 30.70%, 41.70%, and 41.70%, respectively). The consensus guidelines and consensus guidelines + systematic reviews data sets could be compared for 19 guidelines, and the results showed significant improvements in all domain scores (p < 0.05). Conclusions: Methodological improvement of consensus guidelines published in major implant dentistry journals is needed. The findings of the present study may help researchers to better develop consensus guidelines in implant dentistry, which will improve the quality and trust of information needed to make proper clinical decisions. KW - Medical implants KW - Dentistry KW - Systematic reviews KW - Medical journals KW - Treatment guidelines KW - Osseointegration KW - Osteology KW - Database searching Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-180987 VL - 12 IS - 1 ER - TY - JOUR A1 - Türp, Jens C. A1 - Schlenker, Anna A1 - Schröder, Johannes A1 - Essig, Marco A1 - Schmitter, Marc T1 - Disk displacement, eccentric condylar position, osteoarthrosis - misnomers for variations of normality? Results and interpretations from an MRI study in two age cohorts JF - BMC Oral Health N2 - Background Clinical decision-making and prognostic statements in individuals with manifest or suspected temporomandibular disorders (TMDs) may involve assessment of (a) the position of articular disc relative to the mandibular condyle, (b) the location of the condyle relative to the temporal joint surfaces, and (c) the depth of the glenoid fossa of the temporomandibular joints (TMJs). The aim of this study was twofold: (1) Determination of the prevalence of these variables in two representative population-based birth cohorts. (2) Reinterpretation of the clinical significance of the findings. Methods From existing magnetic resonance imaging (MRI) scans of the TMJs that had been taken in 2005 and 2006 from 72 subjects born between 1930 and 1932 and between 1950 and 1952, respectively, the condylar position at closed jaw was calculated as percentage displacement of the condyle from absolute centricity. By using the criteria introduced by Orsini et al. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 86:489-97, 1998), a textbook-like disc position at closed jaw was distinguished from an anterior location. TMJ morphology of the temporal joint surfaces was assessed at open jaw by measuring the depth of the glenoid fossa, using the method proposed by Muto et al. (J Oral Maxillofac Surg 52:1269-72, 1994). Frequency distributions were recorded for the condylar and disc positions at closed jaw. Student’s t-test with independent samples was used as test of significance to detect differences of condylar positions between the age cohorts (1930 vs. 1950) and the sexes. The significance levels were set at 5%. First, the results from the measurement of the age cohorts were compared without differentiation of sexes, i.e., age cohort 1930–1932 versus age cohort 1950–1952. Subsequently, the age cohorts were compared by sex, i.e., men in cohort 1930–1932 versus men in cohort 1950–1952, and women in cohort 1930–1932 women men in cohort 1950–1952. Results In both cohorts, condylar position was characterized by great variability. About 50% of the condyles were located centrically, while the other half was either in an anterior or in a posterior position. In both female cohorts, a posterior position predominated, whereas a centric position prevailed among men. Around 75% of the discs were positioned textbook-like, while the remaining forth was located anteriorly. Age had no statistically significant influence on condylar or on disc position. Conversely, comparison between the age groups revealed a statistically significant decrease of the depth of the glenoid fossa in both older cohorts. This age-dependent changes may be interpreted as flattening of the temporal joint surfaces. Conclusions We call for a re-interpretation of imaging findings because they may insinuate pathology which usually is not present. Instead, anterior or posterior positions of the mandibular condyle as well as an anterior location of the articular disc should be construed as a variation of normalcy. Likewise, flattening of articular surfaces of the TMJs may be considered as normal adaptive responses to increased loading, rather than pathological degenerative changes. KW - Image interpretation KW - Medicalization KW - Osteoarthritis KW - Overdiagnosis KW - Temporomandibular joint disc KW - Mandibular condyle KW - Medical overuse KW - Osteoarthrosis KW - Temporomandibular disorders KW - Terminology Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-164710 VL - 16 IS - 124 ER -