TY - THES A1 - Östreicher, Sebastian T1 - Synthese und Eigenschaften neuartiger Di-, Tri- und Tetrametalloboridokomplexe T1 - Synthesis and Characterisation of Novel Di-, Tri-, and Tetrametalloborido Complexes N2 - Unter Ausnutzung der Reaktivität von Borylanionen wurden neuartige Übergangsmetallboridokomplexe synthetisiert, bei denen ein "nacktes" Boratom als Ligand für bis zu vier Übergangsmetalle vorliegt. Strukturelle und bindungstheoretische Eigenschaften der Boridokomplexe wurden mit gängigen metallorganischen Analysemethoden sowie mit DFT-Methoden untersucht. Dabei zeigte sich, dass die erhaltenen Tetrametalloboridokomplexe eine planare Koordinationsgeometrie um das Borzentrum aufweisen und damit ein Äquivalent zu anti van't Hoff/Le Bel-Verbindungen des Kohlenstoffs darstellen. N2 - Exploiting the reactivity of boryl anions, novel transition metal borido complexes were synthesised. Borido complexes feature a "naked" boron atom that serves as a ligand for up to four metals. Structucal characterisation of the boridokomplexes was carried out by means of common analytical methods as well as DFT-calculations. Tetrametalloborido complexes showed a remarkably planar geometry around the boron center and can therefore be considered as anti van't Hoff/Le Bel compounds. KW - Übergangsmetall KW - Mehrkernige Komplexe KW - Bor-Übergangsmetallverbindungen KW - Boridokomplexe KW - Borylanionen KW - anti-van't Hoff/Le Bel Verbinfungen KW - transition metal boron complexes KW - borido complexes KW - boryl anions KW - anti van't Hoff/Le Bel-compounds Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73943 ER - TY - THES A1 - Vögler, Matthias T1 - Zweifach Eisen-substituierte Silane, Silanole und Siloxane T1 - Double iron substituted Silanes, Silanols and Siloxanes N2 - Die vorliegende Dissertation beschäftigt sich mit der Darstellung Übergangsmetall-substitutierter Silane und Untersuchungen zum Einfluss verschiedener Übergangsmetallsubstituenten auf die chemischen und spektroskopischen Eigenschaften dieser Klasse von Siliciumverbindungen. Dabei steht insbesondere die Synthese mehrfach metallierter Silanole und Siloxane im Vordergrund. A – Halogenierte Bis(metallo)silane: Durch schrittweise Umsetzung von HSiCl3 oder HSiCl2Me mit den Übergangsmetallaten Na[Fe(CO)2Cp] oder Li[W(CO)2PMe3Cp] wurden verschiedene bismetalliete Silane [LnM]2SiRCl (R = H, Me) aufgebaut. Durch weitere Derivatisierung konnten u.a. die Bis(ferrio)silane [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I) dargestellt und z. T. durch Röntgenstrukturen charakterisiert werden. Aus diesen Verbindungen lassen sich durch photochemische CO-Eliminierung die µ2-silylenverbrückten Komplexe [Cp(OC)Fe]2(µ2-CO)(µ2-SiRHal) (R = Me, Halogen) gewinnen. B – Bis(metallo)silanole und –siloxane: Die unter A hergestellten Verbindungen dienten als Vorstufen zur Synthese der neuen Bis(ferrio)silanole [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) und des hetero-bismetallierten Silanols [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Dabei konnte lediglich [Cp(OC)2Fe]2SiH(OH) durch Hydrolyse des entsprechenden halogenierten Bis(ferrio)silans hergestellt werden. Alle anderen Bis(metallo)silanole wurden durch Oxygenierung der jeweiligen SiH-funktionellen Vorstufen mit Hilfe von Dimethyldioxiran synthetisiert. Alle Bis(metallo)silanole sind stabil bezüglich Eigenkondensation, lassen sich aber mit ClSiMe2H in die entsprechenden Siloxane [LnM]2SiR(OSiMe2H) umwandeln. C – Co2(CO)2 assistierte Hydrolyse von Silanen: Die Umsetzung verschiedener Si-H-funktioneller Silane R3Si-H mit Dicobaltoctacarbonyl führt unter H2-Entwicklung zu Cobaltio-Silanen R3Si-Co(CO)4. Diese besitzen eine extrem labile Si-CoBindung, welche sich durch zahlreiche protische Reagenzien spalten läßt. Es wurden u. a die Cobaltio-Silane Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 und Ph2SiCo2(CO)7 generiert und durch Hydrolyse in verschiedene Silanole oder Siloxane überführt. Eine direkte hydrolytische SiH/SiOH-Umwandlung ist auch in Gegenwart katalytischer Mengen Co2(CO)8 möglich und wurde u.a. zur Darstellung des Bis(ferrio)siloxanols [Cp(OC)2Fe]2Si(OH)(OSiMe2H) genutzt. D – DFT-Berechnungen an Übergangsmetallverbindungen von Silicium und Phosphor: Die Strukturen der dimeren Siloxygallane (RH2SiOGaMe2)2 (R = H, tBu) wurden theoretisch berechnet. Man findet eine starke Abhängigkeit der Geometrie des zentralen viergliedrigen Ga-O-Ga-O-Ringes von Größe und relativen Position der exocyclischen Substituenten R. Struktur- und NBO-Analyse des cyclischen Metallasiloxans Cp(OC)(H)Fe[SiMe2O]2SiMe2 belegen den Einfluß des Cp(OC)(H)Fe-Fragmentes auf Struktur und Bindungsverhältnisse des Heterosiloxan Ringes. Relative thermodynamische Stabilitäten wurden für die diastereomeren Formen des kationischen Phosphankomplexe lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ und des µ2-silylenbrückten Eisenkomplexes cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) theoretisch berechnet. N2 - The present Ph.D. thesis is dealing with the preparation of transition metal substituted silanes and with studies concerning the influence of various transition metal substituents on the chemical and spectroscopic properties on this class of silicon compounds. Special emphasis is laid upon the synthesis of silanols and siloxanes with multiple metal substituents A – Halogenated bis(metallo)silanes: Several bismetalated silanes [LnM]2SiRCl (R = H, Me) have been prepared by stepwise metalation of HSiCl3 or HSiCl2Me with the metalates Na[Fe(CO)2Cp] and Li[W(CO)2PMe3Cp]. Of these metallosilanes further derivatives have been prepared, e. g. the halogenated bis(ferrio)silanes [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I), some of which could by characterized by X-ray structures. Photochemical CO elimination from these compounds yields µ2-silylene bridged complexes of the type [Cp(OC)Fe](µ2-CO)(µ2SiRHal) (R = Me, halogen). B – Bis(metallo)silanols and –siloxanes: The compounds prepared in chapter A have served as precursors in the synthesis of the novel bis(ferrio)silanols [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) and the hetero-bismetalated silanol [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Only [Cp(OC)2Fe]2SiH(OH) could be prepared via hydrolysis of the respective halogenated bis(ferrio)silane. The other bis(metallo)silanols were prepared by oxygenation of the SiH functional precursors using dimethyldioxirane. All bis(metallo)silanols are stable with respect to self condensation but can be readily converted with ClSiMe2H into the siloxanes [LnM]2SiR(OSiMe2H). C – Co2(CO)8 assisted hydrolysis of silanes: Reaction of various SiH functional silanes R3SiH with dicobaltoctacarbonyl leads to the formation of H2 and the cobaltio-silanes R3Si-Co(CO)4. The Si-Co bond in these metallosilanes is extremely weak and can be easily cleaved by protic solvents. Several cobaltio-silanes including Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 and Ph2SiCo2(CO)7 have been generated and then converted by hydrolysis into silanols or siloxanes. A direct hydrolytic SiH/SiOH transformation can also be achieved in the presence of catalytic amounts of Co2(CO)8. This procedure has been used e.g. for the preparation of the bis(ferrio)siloxanol [Cp(OC)2Fe]2Si(OH)(OSiMe2H). D – DFT calculations of transition metal substituted compounds of silicon and phosphorous: The molecular structure of the dimeric siloxygallanes (RH2SiOGaMe2)2 (R = H, tBu) has been calculated. A significant dependence of the geometry of the central four membered Ga-O-Ga-O ring on size and relative position of the exocyclic substituents R was found. The calculated structure and NBO analysis of the cyclic metallasiloxane Cp(OC)(H)Fe[SiMe2O]2SiMe2 are demonstrating the impact of the Cp(OC)(H)Fe-fragment on structure and bonding within the hetero-siloxane ring. The relative thermodynamic stabilities of the diastereomeric forms of the cationic phosphane complex lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ and the µ2-silylene bridged iron complex cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) have been calculated. KW - Eisenkomplexe KW - Siliciumorganische Verbindungen KW - Chemische Synthese KW - Silicium KW - Silanole KW - Siloxane KW - Übergangsmetall KW - Oxofunktionalisierug KW - DFT KW - silicon KW - silanol KW - siloxane KW - transition metal KW - oxofunctionalization KW - DFT Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181568 ER - TY - THES A1 - Uttinger, Katharina Doris T1 - Synthese, Struktur und Reaktivität von Boryl- und Borylenkomplexen später Übergangsmetalle T1 - Syntesis, Structure and Reactivity of Late Transition Metal Boryl and Borylene Complexes N2 - Im Rahmen dieser Arbeit ist es gelungen, neue Boryl- und Borylenkomplexe von Palladium und Platin darzustellen. Die vollständige Charakterisierung dieser Verbindungen ermöglicht ees, Rückschlüsse auf die Natur der Metall-Bor-Bindung zu ziehen und trägt so zu einem besseren Verständnis dieser Substanzklasse bei. Überdies konnten bisher unbekoannte Koordinationsmodi für den Borliganden nachgewiesen werden. ... N2 - In the course of this thesis new boryl and borylene complexes of palladium and platinum were synthesised. A full characterisation of these compounds allows conclusions to be drawn on the nature of the metal-boron bond and thus a better understanding of these substances. Furthermore, novelcoordination modes of the boron ligand could be established. ... KW - Bor KW - Übergangsmetall KW - Komplexe KW - boron KW - transition metal KW - complexes Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-27792 ER - TY - THES A1 - Schneider, Achim T1 - Darstellung und Untersuchung von Übergangsmetallkomplexen niederkoordinierter borzentrierter Liganden T1 - Synthesis and investigation of transition metal complexes of low-coordinated boron-centered ligands N2 - Die Klasse der Iminoborylkomplexe wurde systematisch untersucht und bezüglich der metallgebundenen Coliganden und des sterischen Anspruchs der Iminofunktion variiert. Die drastische Verringerung des Raumbedarfs der Iminofunktion ermöglichte im Verlauf der Synthese von trans-[(Cy3P)2BrPt(B≡NiBu)] erstmals, das zuvor lediglich postulierte Borylintermediat NMR-spektroskopisch zu beobachten. Darüber hinaus lieferten die NMR-Spektren Hinweise auf das Vorliegen einer Gleichgewichtsreaktion, bei der es sich eventuell um eine Cyclodimerisierung handeln könnte. Außerdem führte der geringere sterische Schutz der B≡N-Dreifachbindung zu einer signifikant erhöhten Reaktivität, welche die Darstellung des ungewöhnlichen zweikernigen Komplexes [1,4-{trans-(Cy3P)2BrPt(B{NHiBu}NH)}2C6H4] ermöglichte. Der beachtliche stabilisierende Einfluss des Platinfragments auf die Iminoborylfunktion spiegelt sich in den Ergebnissen ausführlicher Reaktivitätsstudien wider. So stellt beispielsweise in trans-[(Cy3P)2BrPt(B≡NSiMe3)] nicht das niedervalente Boratom das elektrophile Zentrum dar. Stattdessen reagierte Natrium(phenylacetylid) unter Substitution des Bromidliganden und Bildung von trans-[(Cy3P)2(PhC≡C)BrPt(B≡NSiMe3)]. Die 1,2-Addition dipolarer Substrate erfolgte in allen Fällen entsprechend der Polarität und hochgradig trans-selektiv. Auf diese Weise konnten im Rahmen der beschriebenen Arbeit durch Hydroborierung der B≡N-Dreifachbindung auch die ersten Vertreter von wasserstoffsubstituierten Borylkomplexen ohne zusätzliche Stabilisierung durch eine Lewis-Base realisiert werden. Außerdem zeigte sich bezüglich der Addition protonenaktiver Reagenzien eine Abhängigkeit von der Brønsted-Acidität der Substrate und dem sterischen Anspruch beider Reaktionspartner. Trans-[(Cy3P)2BrPt(B≡NSiMe3)] reagierte erst unter sauren Bedingungen mit Wasser unter 1,2-Addition an die Iminoborylfunktion und bildet mit Aluminiumchlorid das Lewis-Addukt trans-[(Cy3P)2BrPt{BN(SiMe3)AlCl3}], welches den ersten neutralen Borylenkomplex eines Gruppe 10-Metalls darstellt. Des Weiteren gelang es, die bewährte Strategie zum Aufbau reaktiver Bor−Element-Dreifachbindungen in der Koordinationssphäre von Übergangsmetallen zur Generierung der ersten stabilen B≡O-Dreifachbindung zu nutzen. Der durch reversible Eliminierung von Trimethylbromsilan gebildete neutrale Oxoborylkomplex trans-[(Cy3P)2BrPt(B≡O)] erwies sich ebenfalls als erstaunlich stabil. Die Infrarotdaten weisen auf eine ausgesprochen starke Kraftkonstante der B≡O-Bindung hin. In Übereinstimmung hiermit bestätigten quantenchemische Untersuchungen das Vorliegen zweier orthogonaler π-Bindungen zwischen diesen Elementen. Die konstitutionelle Zusammensetzung des Oxoborylkomplexes konnte darüber hinaus auch durch die Ergebnisse von Röntgenbeugungsexperimenten belegt werden. Aufgrund massiver Fehlordnung beider anionischer und annähernd isosterer Liganden konnten die strukturellen Parameter allerdings nicht verlässlich bestimmt werden. Dieses Problem konnte jedoch durch Substitution des trans-ständigen Bromidliganden überwunden werden. Die Reaktion mit Tetrabutylammoniumthiophenolat verlief selektiv unter Metathese der Pt−Br-Bindung, wodurch die Oxoboryleinheit unangetastet blieb. Das Reaktionsprodukt trans-[(Cy3P)2(PhS)Pt(B≡O)] zeigt die bis dato kürzeste B−O-Bindung. Die formale Bindungsverkürzung im Vergleich zu einer Doppelbindung ist hierbei nur etwas geringer als für die entsprechenden Kohlenstoffanaloga. Auch die trans-ständigen Coliganden tragen essentiell zur Stabilisierung der Oxoborylfunktion bei und können demnach nicht nur als Zuschauerliganden betrachtet werden. So war die Abstraktion des Bromids von trans-[(Cy3P)2BrPt(B≡O)] mit der sofortigen Cyclodimerisierung des kationischen Komplexes unter Bildung von trans,trans-[(Cy3P)2Pt(BO2B)Pt(PCy3)2][Al(Pftb)4]2 verbunden, in dem die Verbrückung zweier Metallzentren über einen Dioxodiboretandiylliganden erstmals experimentell verwirklicht werden konnte. Durch die Gegenwart eines Überschusses an Acetonitril konnte die durch Bromidabstraktion erhaltene monomere, kationische Spezies stabilisiert werden. Strukturelle und vor allem infrarotspektroskopische Eigenschaften des ionischen Reaktionsprodukts trans-[(Cy3P)2(MeCN)Pt(B≡O)][BArf4] zeigen hierbei, dass mit der Einbringung einer positiven Ladung in den Komplex eine leichte Verstärkung der B≡O-Bindung einhergeht. Eine geringe Schwächung dieser Bindung wurde hingegen beispielsweise für das Addukt trans-[(Cy3P)2BrPt(B≡OBPf3)] festgestellt. So führte die Koordination des Lewis-aciden Borans BPf3 an das Sauerstoffatom des Oxoborylkomplexes zu einer erhöhten π-Rückbindung. Diese Ergebnisse betonen nochmals die nahe Verwandtschaft der neuen Klasse der Oxoborylkomplexe mit den gut untersuchten und wertvollen Carbonylkomplexen und vermitteln darüber hinaus einen Eindruck der vielfältigen Reaktivität dieser Verbindungen. N2 - Within the scope of this research project, the class of iminoboryl complexes was systematically investigated and varied with respect to the metal-bound coligands, as well as the substituent at nitrogen. The reduction of the steric requirements of the imino moiety allowed for the NMR-spectroscopic characterization of the previously only postulated, intermediary boryl species during the preparation of trans-[(Cy3P)2BrPt(B≡NiBu)]. Furthermore, the NMR spectra suggested the presence of a dynamic equilibrium. Although the second species in solution could neither be isolated nor unequivocally characterized, spectroscopic data indicated the formation of a cyclodimeric derivative. Moreover, the lower steric protection of the B≡N triple bond was shown to result in an increased reactivity, thus enabling for the synthesis of the unusual dinuclear complex [1,4 {trans-(Cy3P)2BrPt(B{NHiBu}NH)}2C6H4]. Extensive reactivity studies also demonstrated the substantial stabilizing influence of the platinum fragment on the iminoboryl functionality. Accordingly, the low-valent boron atom does not constitute the electrophilic center in trans-[(Cy3P)2BrPt(B≡NSiMe3]. Instead, sodium(phenylacetylide) cleanly reacted by substitution of the bromide yielding trans-[(Cy3P)2(PhC≡C)Pt(B≡NSiMe3]. In all cases, the 1,2-addition of polar substrates proceeded accordingly to the polarity and in a highly trans selective fashion. Through this, hydroboration of the B≡N triple bond inter alia allowed for the isolation of the first hydrogen substituted boryl complexes without additional Lewis-base stabilization. Furthermore, the addition of protic reagents was demonstrated to depend on the Brønsted-acidity of the substrate and the steric requirements of the reactants. Trans-[(Cy3P)2BrPt(B≡NSiMe3)] excels by a remarkable inertness towards water, which only under acidic conditions added to the iminoboryl moiety, and reacted with aluminium trichloride under formation of the first neutral borylene complex of a group 10 metal, namely trans-[(Cy3P)2BrPt{BN(SiMe3)AlCl3}]. Moreover, the established strategy to generate reactive boron−element multiple bonds in the coordination sphere of transition metals could be expanded to access the first compound containing a stable B≡O triple bond. The neutral oxoboryl complex trans-[(Cy3P)2BrPt(B≡O)], which was formed by reversible elimination of trimethylbromosilane, in turn proved to be unexpectedly stable. Infrared spectroscopic data suggested a strong force constant of the B≡O bond. Accordingly, quantum chemical investigations revealed the presence of two orthogonal π bonds between those elements. The molecular composition could be confirmed by X-ray diffraction studies. However, severe displacement of the almost isosteric, anionic ligands prevented a reliable determination of the structural parameters. This problem could be circumvented by substitution of the bromide ligand. Thus, tetrabutylammonium thiophenolate underwent clean metathesis with the Pt−Br bond leaving the B≡O moiety intact. The product trans-[(Cy3P)2(PhS)Pt(B≡O)] exhibits the shortest B−O bond length observed so far. The formal bond shortening with respect to a B=O double bond is only slightly smaller than for the corresponding carbon−carbon analogs. The ligands in trans position crucially contribute to the stabilization of the oxoboryl function and therefore, cannot be considered mere spectator ligands. Thus, bromide abstraction from trans-[(Cy3P)2BrPt(B≡O)] induced immediate cyclodimerization of the cationic complex yielding trans,trans-[(Cy3P)2Pt(BO2B)Pt(PCy3)2][Al(Pftb)4]2, which is the first compound with an dioxodiboretanediyl ligand bridging two metal centers. In the presence of an excess of acetonitrile, the monomeric, cationic species obtained by trans bromide abstraction could be stabilized. Structural and in particular infrared spectroscopic properties of the ionic product trans-[(Cy3P)2(MeCN)Pt(B≡O)][BArf4] reveal a strengthening of the B≡O bond associated with the introduction of a positive charge. On the contrary, the B≡O bond in trans-[(Cy3P)2BrPt(B≡OBPf3)] appears slightly weakened. Thus, coordination of the Lewis-acidic borane BPf3 caused an increase in the metal to boron π backdonation. These findings once again emphasize the close relationship of oxoboryl complexes with the well-known and valuable class of carbonyl complexes and nicely illustrate the versatile reactivity of these compounds. KW - Übergangsmetallkomplexe KW - Koordinativ ungesättigte Verbindungen KW - Ligand KW - Borylgruppe KW - Oxoborylkomplex KW - Iminoborylkomplex KW - Bor KW - Oxoboran KW - Iminoborane KW - Platin KW - Übergangsmetall KW - Lewisaddukt KW - dipolare Addition KW - Metathese KW - oxoboryl complex KW - iminoboryl complex KW - transition metal KW - metathesis KW - Lewis adduct Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52275 ER - TY - THES A1 - Ricker, Robert T1 - Synthesis, group 10 metal-catalyzed cyclization reactions and hydroboration of polyynes T1 - Synthese, Gruppe 10 metallkatalysierte Cyclisierungsreaktionen und Hydroborierung von Polyinen N2 - Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle. N2 - Bisdiyne gehen eine Pd(0)-katalysierte Zyklisierung ein, bei der Azulen- und Naphthalinprodukte entstehen. Wenn Dibenzylidenaceton in der Reaktion vorhanden ist, kommt es zu einer [2+2+2]-Cyclisierung mit dem Bisdiin, wobei Cyclohexadien-Derivate entstehen. Ni(0) katalysiert die [2+2+2]-Cycloaddition von Diinen mit Tolanen zu alkinilierten o-Terphenylderivaten. Die D-A-substituierten Produkte sind solvatochrome, fluoreszierende Farbstoffe mit hohen Quantenausbeuten und kurzen Lebensdauern. Bis-Triarylboran-Tetrain-Farbstoffe wurden sowohl in neutraler als auch in tetrakationischer Form synthetisiert, die als DNA/RNA-Sensoren in Frage kommen. Beide Moleküle sind in Lösung schwach fluoreszierend und zeigen charakteristische Alkin-Absorptionen in den Raman-Spektren. Tributylphosphin katalysiert die trans-Hydroboration von 1,3-Butadinen mit HBpin. Mittels NMR- und HRMS-Experimenten haben wir experimentell bestätigt, dass der Phosphin-Angriff auf das Diin ein Schlüsselschritt im katalytischen Zyklus ist. KW - Polyine KW - Diine KW - Fluoreszierender Stoff KW - Übergangsmetall KW - group 10 element KW - cyclization reactions KW - fluorescence Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-286801 ER - TY - THES A1 - Remenyi, Christian T1 - Density Functional Studies on EPR Parameters and Spin-Density Distributions of Transition Metal Complexes T1 - Dichtefunktionalstudien zu EPR-Parametern und Spindichteverteilungen von Übergangsmetallkomplexen N2 - In dieser Arbeit wurden EPR-Parameter und Spindichteverteilungen von Übergangsmetallkomplexen mit Hilfe der Dichtefunktionaltheorie (DFT) berechnet. Um das Potential der DFT bei der Beschreibung solcher Systeme zu zeigen, wurden mehrere Validierungsstudien durchgeführt, die in den Kapiteln 3-5 vorgestellt werden. Die Kapitel 6-8 beschäftigen sich dagegen eher mit konkreten chemischen Fragestellungen, die einige biologisch relevante Übergangsmetallkomplexe betreffen. N2 - In this work we utilized Density Functional Theory to calculate EPR parameters and spin-density distributions of several transition metal complexes. To demonstrate the performance of our theoretical approach several validation studies were performed (Chapters 3-5). In contrast, the last three chapters of the thesis deal with specific chemical problems regarding several classes of biologically relevant transition metal complexes. KW - Dichtefunktionalformalismus KW - Elektronenspinresonanz KW - Spindichte KW - Übergangsmetall KW - DFT KW - EPR KW - Spindichte KW - g-Tensor KW - Hyperfeinkopplungstensor KW - DFT KW - EPR KW - Spin density KW - g-tensor KW - HFC-tensor Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-19848 ER - TY - THES A1 - Mao, Lujia T1 - Transition Metal-Catalyzed Construction of Benzyl/Allyl sp\(^3\) and Vinyl/Allenyl sp\(^2\) C-B Bonds T1 - Übergangsmetall katalysierte Konstruktion von Benzyl/Allyl sp\(^3\) und Vinyl/Allenyl sp\(^2\) C-B Bindungen N2 - Organoboron compounds, such as benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates, have been synthesized via metal-catalyzed borylations of sp3 C-O and C-H bonds. Thus, Cu-catalyzed borylations of alcohols and their derivatives provide benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates via nucleophilic substitution. The employment of Ti(OiPr)4 turns the OH moiety into a good leaving group (‘OTi’). The products of Pd-catalyzed oxidative borylations of allylic C-H bonds of alkenes were isolated and purified, and their application in the one-pot synthesis of stereodefined homoallyl alcohols was also investigated. Chapter 2 presents a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively, employing a commercially available catalyst precursor, [Cu(CH3CN)4]2+[BF4-]2, and Xantphos as the ligand. The borylation of benzylic alcohols was carried out at 100 oC with 5-10 mol % [Cu(CH3CN)4]2+[BF4-]2, which afforded benzylic boronates in 32%-95% yields. With 10 mol % [Cu(CH3CN)4]2+[BF4-]2, allylic boronates were provided in 53%-89% yields from the borylation of allylic alcohols at 60 or 100 oC. Secondary allylboronates were prepared in 72%-84% yields from the borylation of primary allylic alcohols, which also suggests that a nucleophilic substitution pathway is involved in this reaction. Allenylboronates were also synthesized in 72%-89% yields from the borylation of propargylic alcohols at 40 or 60 oC. This methodology can be extended to borylation of benzylic and allylic acetates. This protocol exhibits broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including the preparation of secondary allylic boronates. Preliminary mechanistic studies suggest that nucleophilic substitution is involved in this reaction. Chapter 3 reports an efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via copper-catalyzed borylation reactions under mild conditions. In the presence of a commercially available catalyst precursor (Cu(OAc)2 or Cu(acac)2) and ligand (Xantphos), the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Vinylboronates were synthesized in 50%-83% yields via Cu-catalyzed hydroboration of mono-substituted propargylic alcohols. With 1,1-disubstituted propargylic alcohols as the starting materials and Cu(OAc)2 as the catalyst precursor, a variety of allylboronates were synthesized in 44%-83% yields. The (E)-2-boryl allylboronates were synthesized in 54%-92% yields via the Cu-catalyzed diboration of propargylic alcohols. The stereoselectivity is different from the Pd(dba)2-catalyzed diboration of allenes that provided (Z)-2-boryl allylboronates predominantly. The isolation of an allenyl boronate as the reaction intermediate suggests that an SN2’-type reaction, followed by borylcupration, is involved in the mechanism of the diboration of propargylic alcohols. In chapter 4, a Pd-catalyzed allylic C-H borylation of alkenes is reported. The transformation exhibits high regioselectivity with a variety of linear alkenes, employing a Pd-pincer complex as the catalyst precursor, and the allylic boronate products were isolated and purified. This protocol can also be extended to one-pot carbonyl allylation reactions to provide homoallyl alcohols efficiently. An interesting mechanistic feature is that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle. Formation of the Pd(IV) intermediate occurs by a unique combination of an NCNpincer complex and application of F-TEDA-BF4 as the oxidant. An important novelty of the present C-H borylation reaction is that all allyl-Bpin products can be isolated with usually high yields. This is probably a consequence of the application of the NCN-pincer complex as catalyst, which selectively catalyzes C-B bond formation avoiding subsequent C-B bond cleavage based side-reactions N2 - Bisher ist es uns gelungen, effiziente Methoden zur Erzeugung von Benzyl/Allyl-sp3- und Vinyl/Allenyl-sp2-C-B-Bindungen mit Hilfe von Kupfer- oder Palladium-katalysierter Borylierung der entsprechenden Alkohole oder Alkene zu entwickeln, bei welchen es sich um leicht zugängliche Substrate handelt. Kapitel 2 In Kapitel 2 wird das erste Beispiel einer Cu-katalysierten, direkten Borylierung von Alkoholen (40 Beispiele) vorgestellt. Dies stellt eine effiziente Methode dar, um ein breites Spektrum an Benzyl-, Allyl- und Allenyl-Boronaten unter milden Bedingungen herzustellen. Die Verwendung von Ti(OiPr)4 wandelt den OH-Rest in eine hervorragende Abgangsgruppe (‚OTi‘) um, was eine wichtige Rolle bei der Borylierung von Alkoholen spielt. Obwohl ein Cu(II)-Komplex als Vorstufe für den Katalysator eingesetzt wurde, wird davon ausgegangen, dass der aktive Katalysator für die Borylierungsreaktion eine Cu(I)-Spezies ist. Benzylboronate wurden mit Hilfe einer Cu-katalysierten Borylierung von Benzylalkoholen (Gl. Z-1) dargestellt, wobei sowohl der Kupferkomplex [Cu(CH3CN)4]2+[BF4-]2 als auch der Xantphos-Ligand kommerziell erhältlich sind. Für die Borylierung von Benzylalkoholen wurde eine Katalysatorladung von 5 mol% des Kupferkatalysators verwendet, was auf eine hohe Effizienz dieser Methode schließen lässt. Alle Benzylboronate wurden in moderaten bis hohen Ausbeuten (bis zu 95%) isoliert. Diese Vorgehensweise lässt sich ebenso auf die Borylierung von Benzylacetaten anwenden, wobei ein Benzylboronat mit 54% Ausbeute erhalten werden kann. Dies lässt darauf schließen, dass es sich um eine allgemein anwendbare Methode handelt. Ferner wurden Allylboronate mit Hilfe einer vergleichbaren Route wie die Benzylboronate dargestellt (Gl. Z-2), wobei die Temperatur auf 60 °C abgesenkt werden kann. Bei der Borylierung von Allylalkoholen wurden ausgehend von primären Allylalkoholen sekundäre Allylboronate erhalten. Diese Reaktion unterscheidet sich daher von früheren Pd-katalysierten Borylierungen von Zusammenfassung Allylalkoholen, welche ausschließlich zu linearen Allylboronaten aufgrund der Bildung von (3- Allyl)Pd-Intermediaten führten. Anhand dieses Ergebnisses wird angenommen, dass eine nukleophile Substitution Teil des entsprechenden Mechanismus ist. Weiterhin weist diese Reaktion die Möglichkeit auf, chirale Allylboronate ausgehend von verschiedenen primären Allylalkoholen zu erhalten. Diese finden signifikante Anwendung bei der asymmetrischen Synthese. Unseres Wissens nach stellt diese Methode außerdem das erste Beispiel einer katalytischen Synthese von sekundären Allylboronaten dar, die direkt von Alkoholen ausgeht. Die Borylierung konnte ebenfalls mit sekundären und tertiären Allylalkoholen durchgeführt werden, wobei die entsprechenden Allylboronate in guten Ausbeuten erhalten wurden. Diese Cu-katalysierte Borylierungsreaktion kann außerdem Anwendung in der Borylierung von Propargylalkoholen finden (Gl. Z-3), wobei die Darstellung von Allenylboronaten in guten Ausbeuten erreicht wird. Hierbei kann die Reaktionstemperatur weiter auf 40 °C abgesenkt werden. Des Weiteren weist die Regioselektivität der Borylierung von Propargylakoholen darauf hin, dass die Reaktion über eine nukleophile Substitution verläuft. Die in Kapitel 2 vorgestellten Ergebnisse lassen darauf schließen, dass die Cu-katalysierte Borylierung von Akoholen eine allgemein anwendbare Methode zur Synthese von Benzyl-, Allylund Allenylboronaten darstellt. Kapitel 3 In Kapitel 3 wird eine Methode zur Synthese von Vinyl-, Allyl- und (E)-2-Boryl-Allyl-Boronaten mit Hilfe von Cu-katalysierter Borylierung von Propargylalkoholen (43 Beispiele) vorgestellt. Hierzu wurden kommerziell erhältliche Kupferkatalysatoren wie Cu(acac)2 und Cu(OAc)2 eingesetzt. In dieser Vorschrift wird erneut Ti(OiPr)4 verwendet, um durch die Reaktion mit Alkoholen (OH) in eine bessere Abgangsgruppe (OTi) zu erhalten. Zugang zu den (E)-2-Boryl-Allylboronaten wurde mit Hilfe von Cu-katalysierter Diborylierung von Propargylalkoholen (Gl. Z-4) ermöglicht. Die Reaktion kann bei 60 oder 80 °C durchgeführt werden. Die Regioselektivität dieser Cu-katalysierten Diborylierungsreaktion unterscheidet sich von der Pd2(dba)3-katalysierten Diborylierung von Allenen, bei der 2-Boryl-Allyl-Boronate mit C=C Doppelbindungen an der terminalen Position erhalten werden. Die Stereoselektivität weist ebenfalls einen Unterschied zur Pd(dba)2-katalysierten Diborylierung von Allenen auf. Bei dieser werden vorranging (Z)-2-Boryl-Allyl-Boronate mit C=C-Doppelbindungen an der internen Position erzeugt. Dies offenbart eine einzigartige Eigenschaft unserer Cu-katalysierten Diborylierung von Propargylalkoholen, welche die Nützlichkeit von Alkoholen in der Entwicklung der synthetischen Methode erweitert. Die Isolierung eines Allenylboronates als Zwischenprodukt während der Reaktion lässt vermuten, dass der Mechanismus der Diborylierung von Propargylalkoholen gemäß einer SN2‘-Reaktion verläuft, auf die eine Borylcuprierung folgt. Die Borylierung von 1,1-disubstituierten Propargylalkoholen, bei der Cu(OAc)2 als Vorstufe des Katalysators eingesetzt wird, führt zur Bildung von (Z)-Allylboronaten als Hauptprodukt (Gl. Z-5). Die Regio- und Stereoselektivität dieser Reaktion und der Cu-katalysierten Borylcuprierung von Allenylsilanen stimmen überein, wobei ein Unterschied zur Pd-katalysierten Borylierung von Allylalkoholen besteht, bei der vorrangig (E)-Allylboronate entstehen. Es liegt nahe, dass die Cukatalysierte Borylierung von 1,1-disubstituierten Propargylalkoholen eine alternative Route zur Herstellung von (Z)-Allylboronaten darstellt, da die Startmaterialien entweder kommerziell erhältlich oder einfach herzustellen sind. Vinylboronate werden ebenfalls mit Hilfe der Cu-katalysierten Borylierung von monosubstituierten Propargylalkoholen (Gl. Z-6) dargestellt. Die Regioselektivität hierbei stimmt mit der der Cu-katalysierten Borylcuprierung von Alkinen überein. Verglichen mit der Borylcuprierung von Allenen bietet die Borylierung von mono-substituierten Propargylalkoholen einen direkteren Zugang zur Darstellung von Vinylboronaten, da Allene in der Regel ausgehend von Propargylalkoholen dargestellt werden. Alle in Kapitel 3 diskutierten Ergebnisse weisen darauf hin, dass die Cu-katalysierte Borylierung von Propargylalkoholen eine einzigartige Methode zur Synthese von Vinyl-, Allyl- und (E)-2-Boryl- Allylboronaten bietetund eine allgemein anwendbare Vorschrift zur Herstellung von Organobor- Verbindungen mit einfach zugänglichen Startmaterialien darstellt. Die Regio- und Stereoselektivität unterscheidet sich außerdem von den bereits bekannten Methoden. Obwohl Cu(II)-Vorstufen der Katalysatoren eingesetzt werden, handelt es sich bei der katalytisch aktiven Spezies vermutlich um eine Cu(I)-Verbindung, da die Borylierungsreaktionen unter reduktiven Bedingungen durchgeführt werden. Kapitel 4 In Kapitel 4 wurde eine Pd-katalysierte oxidative Borylierung der C-H Bindungen von Alkenen (Gl. Z-7) vorgestellt, bei der eine Vielzahl an linearen Allylboronaten in guten Ausbeuten erzeugt wurde (Gl. Z-7). Außerdem konnten alle Allylboronate isoliert und gereinigt werden, was eine einzigartige Eigenschaft dieser Methode darstellt. Ein interessanter mechanistischer Aspekt dieser Reaktion ist das Durchlaufen eines Pd(II)/Pd(IV)-Katalysezyklus. Die Bildung des Pd(IV)-Intermediates erfolgt durch eine einzigartige Kombination des NCN-Pincerkomplexes A als Katalysaror und F-TEDABF4 als Oxidationsreagenz. Eine wichtige Neuerung der vorgestellten C-H-Borylierungsreaktion ist, dass sämtliche Allyl-BPin-Produkte für gewöhnlich in hohen Ausbeuten isoliert werden können. Dies ist vermutlich eine Folge der Verwendung des Pincer-Komplexes A als Katalysator, welcher selektiv die C-B-Bindungsbildung katalysiert und anschließend, als Pd(IV)-Spezies, C-BBindungsspaltungen als Nebenreaktionen vermeidet. Außerdem kann unsere Vorschrift auf Eintopf-Reaktionen von Aldehyden mit Allylen angewendet werden, um Homoallylalkohole zu erhalten (Gl. Z-8). Zusammengefasst haben wir eine Vielzahl an Borylierungsreaktionen entwickelt, um Benzyl-, Allyl-, Allenyl-, Vinyl- und 2-Boryl-Allylboronate mit Hilfe von Cu- oder Pd-katalysierter Borylierung von Alkoholen und Alkenen, bei denen es sich um leicht zugängliche Startmaterialien handelt, darzustellen. Die Reinigung dieser reaktiven Organobor-Verbindungen weist darauf hin, dass unsere Methoden die Werkzeuge zur Untersuchung der Reaktivität dieser Verbindungen liefern könnten. Die Synthese von sekundären Allylboronaten und 2-Boryl-Allylboronaten beinhaltet außerdem die potenzielle Anwendung in der asymmetrischen Synthese zur Erzeugung wertvoller asymmetrischer Organobor-Verbindungen. KW - borylation KW - synthetic methodology KW - Übergangsmetall KW - Borylierung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154022 ER - TY - THES A1 - Macha, Bret B. T1 - Boron-Containing Aromatics as Communicating and Communicative Units in π-Conjugated Systems T1 - Borhaltige Aromaten als Kommunikations-vermittelnde Einheiten in π-konjugierten Systemen N2 - Project Borylene A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new “first generation” unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence. Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand’s coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state. Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new “second generation” borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively. Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions: [1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex. [2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center. [3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals. Project Borirene The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring. A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions. Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex’s photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable. A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species. Project Boratabenzene The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings. This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, and E\(_{1/2}\)(4) = −2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/–1}\), and [(189)]\(^{–1/–2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge. While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes. Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed. N2 - Projekt: Borylene Ein neuer Borylen-Ligand ({BN(SiMe\(_3\))(t-Bu)}) konnte dargestellt werden, der terminal an Metallfragmente der Form [M(CO)\(_5\)] (M = Cr, Mo, und W) bindet. Die Komplexe [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), und [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) konnten durch doppelte Salzeliminierung von Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), und W (12)) mit dem Dihalogenboran Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18) erfolgreich dargestellt werden (Abbildung 6-1). Der neue, unsymmetrische Borylen-Ligand der “ersten Generation” ist eng verwandt mit dem Bis(trimethylsilyl)aminoborylen-Liganden, zu dem er, wie gezeigt werden konnte, ähnliche Strukturmerkmale und Reaktivitäten aufweist. Der unsymmetrische Borylen-Ligand {BN((SiMe\(_3\))(t-Bu)} zeigt jedoch auch einige Besonderheiten. So verläuft der photolytische Transfer auf Übergangsmetallfragmente im Vergleich zum symmetrischen {BN(SiMe\(_3\))\(_2\)}-Liganden schneller, was ihn auf der Grundlage von NMR- und IR-spektroskopischen Daten zu einem reaktiveren Borylen macht. Photolytische Transferreaktionen des neuen Borylens ({BN((SiMe\(_3\))(t-Bu)}) mit verschiedenen Metallkomplexen verlaufen entweder unter vollständigem oder teilweisem Transfer zu verbrückenden Borylen-Komplexen. Im Falle von Lewis-aciden, frühen Übergangsmetallkomplexen (bis zur Gruppe 6) wird eine terminale Koordination bevorzugt. Bei Lewis-basischen Übergangsmetallen (jenseits der Gruppe 9) hingegen scheint der verbrückende Koordinationsmodus energetisch bevorzugt zu sein. Es wurde beobachtet, dass bei Transferreaktionen anfänglich terminale Borylen-Komplexe gebildet werden, die sich in Komplexe mit verbrückenden Borylen-Liganden umlagern. Abbildung 6-2 gibt eine Übersicht über die durchgeführten Transferreaktionen zwischen der Chromborylen-Spezies [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) und den Übergangsmetallkomplexen [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). Bei diesen Umsetzungen konnten die Borylen-Komplexe der “zweiten Generation” [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62) erfolgreich erhalten werden. Eine Analyse der gesammelten spektroskopischen (NMR, IR) und strukturellen Daten erlaubt folgende Schlussfolgerungen für die terminalen Borylen-Komplexe: [1] Die NMR-spektroskopischen Daten für die Gruppe-6-Metall-Komplexe der “ersten Generation” ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) zeigen, dass die \(^{11}\)B{\(^1\)H}- und \(^{13}\)C{\(^1\)H}-NMR Signale für die Carbonyle bei Gang zu den schwereren Homologen zu höherem Feld verschoben sind. Daraus resultiert die größte Entschirmung der Kerne für den Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19). [2] Die Bor-Metall-trans-Kohlenstoff-Achse (B-M-C\(_{trans}\)) in den Borylen-Komplexen der “ersten Generation” [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20) und W (21)) ist nicht linear, was einen direkten Vergleich der IR-Schwingungsbanden miteinander verhindert. Die Chrom-Verbindung ist nahezu linear und zeigt die erwarteten drei IR-Schwingungsbanden für die Carbonyle, die im Vergleich zum Chrom-Bis(trimethylsilyl)aminoborylen-Komplex (OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) zu höheren Energien verschoben sind. Die Befunde deuten darauf hin, dass der ({BN(SiMe\(_3\))(t-Bu)})-Ligand ein etwas stärkerer σ-Donor ist. [3] Wie in Transferreaktionen gezeigt werden konnte, bevorzugt der Borylen-Ligand {BN(SiMe\(_3\))(t-Bu)} einen terminalen Koordinationsmodus bei Lewis-aciden, frühen Übergangsmetallen und einen verbrückenden Koordinationsmodus bei Lewis-basischen, späten Übergangsmetallen. Projekt: Borirene Die Synthese der ersten Bis(borirenyl)platin-Komplexe wurde vorgestellt, zusammen mit strukturellen und elektronischen Auswirkungen der koplanar angeordneten Borirenringe. Die Reihe der trans-Bis(borirenyl)platin-Komplexe 119/120, 122/123, und 125/126 stellt die ersten Beispiele für Bis(boriren)-Komplexe dar, in denen die Ringsysteme koplanar zueinander angeordnet sind (Abbildung 6-4). Die Rolle des Platinatoms als Vermittler elektronischer Kommunikation zwischen den chromophoren, aromatischen Borliganden manifestiert sich in einem bathochromen Shift der Boriren-Absorptionsbanden im Vergleich zu Mono-σ-Borirenyl-Systemen, als Folge einer ausgedehnten Elektronendelokalisierung. Das trans-Bis(boriren)platin-Gerüst dient dabei als vereinfachtes monomeres System, um sowohl die Effekte des Übergangmetallatoms in der Vermittlung elektronischer Konjugation als auch die Abstimmbarkeit der photophysikalischen Eigenschaften in Abhängigkeit der dreigliedrigen, aromatischen Ringe zu studieren. Eine Reihe von trans-Bis(alkinyl)platin-Komplexen (95, 102, 106, und 63) wurde als Plattform für den Borylentransfer von {BN(SiMe\(_3\))\(_2\)} dargestellt (Abbildung 6-3). Durch Salzeliminierungsreaktionen von cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) mit zwei Äquivalenten des entsprechenden Alkins in Diethylamin ließen sich die Komplexe "trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)]" (95), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] " (102), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)]" (106), und "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) synthetisieren. Drei trans-Bis(borirenyl)platin-Komplexe (119/120, 122/123, und 125/126) konnten erfolgreich durch photolytischen Transfer des terminalen Borylen-Liganden {BN(SiMe\(_3\))\(_2\)} vom Chrom-Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) auf die trans-Bis(alkinyl)platin-Komplexe (95, 102, und 106) dargestellt werden (Abbildung 6-4). Versuche des Borylentransfers auf den trans-Bis(alkinyl)platin-Komplex "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) scheiterten an der Photoinstabilität des Komplexes. Obwohl eine weitere Vielzahl an Platin-Alkinyl-Komplexen dargestellt wurde, verlief der Borylentransfer nur bei den drei eben erwähnten Komplexen erfolgreich. Weitere Bestrebungen, ein cis-Isomer zum direkten Vergleich mit den trans-konfigurierten Komplexen darzustellen, verliefen ebenfalls erfolglos. Außerdem wurden terminal funktionalisierte Platin-Komplexe vom Gladysz-Typ als Plattform zum Borylentransfer synthetisiert, zeigten sich aber ebenfalls instabil unter photolytischen Bedingungen. Eine Reihe neuer Monoborirene Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), und [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) wurde durch photolytischen und thermischen Transfer des unsymmetrischen {BN(SiMe\(_3\))(t-Bu)}-Liganden ausgehend von den Komplexen [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) auf organische und organometallische Alkin-Substrate dargestellt. Ziel dieser Umsetzungen war es zu untersuchen, ob der unsymmetrische Borylen-Ligand eine andere Reaktivität im Vergleich zu den symmetrischen, terminalen Borylenen der Form [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), und W (15)) aufweist. Die entsprechenden Monoborirene wurden als analytisch reine Öle isoliert. Zur Röntgenstrukturanalyse geeignete Einkristalle konnten demnach nicht erhalten werden. Projekt: Boratabenzole Der Bis(boratabenzol)-Komplex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}](189) wurde durch Umsetzung von Tetrabromdiboran (65) mit sechs Äquivalenten Cobaltocen erfolgreich dargestellt. Die Reaktion ist in der Hinsicht besonders, da Cobaltocen (176) sowohl als Reagens als auch als Reduktionsmittel fungiert (Abbildung 6-5). Der bimetallische Übergangsmetallkomplex besteht aus einem verbrückenden Bis(boratabenzol)-Liganden, der die beiden Metallzentren durch eine Bor-Bor-Einfachbindung verbindet. Es konnte gezeigt werden, dass der neuartige Ligand eine Delokalisierung der π-Elektronen zwischen den Cobaltatomen ermöglicht, begünstigt durch das zur Bor-Bor-Bindung zugehörige LUMO. Wie durch die Separation aufeinanderfolgender Redoxprozesse im Cyclovoltammogramm gezeigt werden konnte, vermittelt der dianionische Diborligand die elektronische Kopplung zwischen den Cobaltatomen. Vier verschiedene Redoxpotentiale wurden für Komplex 189 gefunden:E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, und E\(_{1/2}\)(4) = −2.36 V (referenziert gegen das Fc/Fc+-Paar) (Abbildung 6-6). Die Potentiale können zwei dicht beieinander liegenden Oxidationsprozessen ([(189)]\(^{0/+1}\) und [(189)]\(^{+1/+2}\) und zwei gut getrennten Reduktionsprozessen [(189)]\(^{+1/+2}\) und [(189)]\(^{–1/–2}\) zugeordnet werden. Das Ausmaß der Metall-Metall-Kommunikation ist dabei abhängig von der Ladung der Metallatome. Die negative Ladung wird effektiver durch die Bis(boratabenzol)-Einheit delokalisiert (Robin-Day-Klasse II). Magnetische Messungen deuten darauf hin, dass die Cobalt(II)-Ionen schwach antiferromagnetisch über die B-B-Brücke gekoppelt sind. Während die Reduktion des Bis(boratabenzol)-Systems zur Zersetzung des Komplexes führte, resultierte die Ein- und Zwei-Elektronen-Oxidation in isolierbaren, stabilen monokationischen (194) bzw. dikationischen (195) Formen des Bis(boratabenzol)-Komplexes (Abbildung 6-7). Die präparativen Arbeiten bestätigen damit die elektrochemischen Ergebnisse an der neutralen Verbindung. Die kationischen Spezies zeigten sich instabil in Acetonitril oder Nitromethan, den einzigen Lösungsmitteln worin sie sich lösten, was weitere Reaktivitätsstudien erschwerte. Schließlich wurde die Reaktivität des neutralen Bis(boratabenzol)-Komplexes 189 eingehender untersucht. Versuche zur (A) Abspaltung des freien Bis(boratabenzol)-Liganden durch Dekomplexierung der Cyclopentadienylcobalt-Fragmente und zur (B) oxidativen Addition von Übergangsmetall-Komplexen an die B-B-Bindung, um die ersten L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\))Komplexe darzustellen, wurden unternommen. Alle Versuche zeigten jedoch, dass die eingesetzten Reagenzien entweder zu keinen Umsetzungen oder zur Zersetzung des Bis(boratabenzol)-Komplexes führten. Bisher konnten somit noch keine Hinweise auf eine oxidative Addition der B-B-Bindung im Bis(boratabenzol)-Komplex erhalten werden. KW - Borverbindungen KW - Boron Chemistry KW - Aromatic Systems KW - Transition Metals KW - Aromaten KW - Übergangsmetall KW - Chemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137498 ER - TY - THES A1 - Kramer, Thomas T1 - Übergangsmetall-Bor-Wechselwirkungen in Boryl- und Boridkomplexen T1 - Transitionmetal-Boron-Interactions in Boryl and Boride Complexes N2 - Durch Untersuchungen zur Reaktivität von Boryl- und Boridverbindungen konnten deren Bindungssituationen aufgeklärt und neuartige Koordinationsmotive von Übergangsmetall-Bor-Verbindungen erhalten werden. Die erhaltenen Verbindungen wurden mittels NMR-Spektroskopie, IR-Spektroskopie, Elementaranalyse und Röntgendiffraktometrie untersucht und zusätzlich wurden DFT-Rechnungen angefertigt. An verschieden substituierten Eisenborylkomplexen wurden Reaktivitätsuntersuchungen gegenüber Halogenidabstraktionsmitteln und Reduktionsmitteln durchgeführt und im Falle der Boridkomplexe wurden Verbindungen mit bis dato unbekanntem Strukturmotiv erhalten. N2 - Investigations into the reactivities of boryl and boride complexes provided insight into their bonding and led to previously unknown coordination motifs for transition-metal-boron complexes. The resulting compounds were analyzed via NMR spectroscopy, IR spectroscopy, elemental analyses and crystal structure analyses. Their electronic structures were investigated by theoretical calculations using DFT methods. The reactivities of substituted iron boryl complexes toward halogenide abstracting and reducing reagents were studied and, in case of the boride complexes, novel structural motifs were dentified. KW - Übergangsmetall KW - Mehrkernige Komplexe KW - Borylgruppe KW - Dimerisierung KW - Übergangsmetall-Borverbindungen KW - Borchemie KW - Boridkomplexe KW - Isonitrilinsertion KW - Boride KW - Borylkomplexe Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112222 ER - TY - THES A1 - Heßler, Markus T1 - Elektronenspektroskopie an Übergangsmetallclustern T1 - Electron spectroscopy on transition metal clusters N2 - Im Rahmen der vorliegenden Arbeit wurden Untersuchungen zum Magnetismus und der elektronischen Struktur deponierter Cluster der 3d-Übergangsmetalle Fe, Co und Ni durchgeführt. Dabei zeigte sich, dass die Deposition der Cluster in Argon-Dünnfilme nicht nur zur fragmentationsfreien Probenpräparation genutzt werden kann, sondern auch die Untersuchung der Cluster in einer Umgebung mit geringer Wechselwirkung erlaubt. Die Beobachtung des atomaren Co-Multipletts sowie die Übereinstimmung der, mittels XMCD bestimmten, magnetischen Gesamtmomente von Fe- und Co-Clustern mit Gasphasenexperimenten zeigen auf, dass unter stabil gewählten Bedingungen die intrinsischen magnetischen Clustereigenschaften tatsächlich experimentell zugänglich sind. Die synchrotroninduzierte Mobilität von Clustern und Argon manifestiert sich in der Veränderung der Form der Absorptions- und Photoemissionslinien sowie in der zunehmenden Verminderung der gemessenen Magnetisierung. Neben den geeigneten Experimentierbedingungen ist zur Bestimmung der magnetischen Momente die Anwendbarkeit der XMCD-Summenregeln auf die Spektroskopie an Clustern notwendig. Besondere Beachtung verdient dabei auf Grund der reduzierten Symmetrie in Clustern der "magnetische Dipolterm" zur Spin-Summenregel. Der Vergleich des spektroskopisch ermittelten Gesamtmoments mit demjenigen, welches aus superparamagnetischen Magnetisierungskurven bestimmt wurde, erlaubt es, für seinen Beitrag bei Co-Clustern eine obere Schranke von 10% anzugeben. Erwartungsgemäß weisen die Spinmomente von Fe- und Co-Clustern gemessen am Festkörper deutlich erhöhte Werte auf, allerdings reichen sie nicht an die mittels Stern-Gerlach-Ablenkung bestimmten magnetischen Gesamtmomente der Cluster heran. Die elektronische Struktur von Nickelclustern erweist sich als sehr empfindlich gegen Wechselwirkungen mit Fremdatomen, so dass die magnetischen Resultate aus der Gasphase nicht nachvollzogen werden können. Allen Clustern in der Argonumgebung ist jedoch eine starke Erhöhung des bahnartigen Anteils am Gesamtmoment, generell auf mehr als 20% gemein. Damit kann nachgewiesen werden, dass die bestehende Diskrepanz zwischen berechneten Spinmomenten und experimentell bestimmten Gesamtmomenten in der Tat auf große Bahnmomente zurückzuführen ist. Dies gilt um so mehr, als die in dieser Arbeit bestimmten magnetischen Gesamtmomente an Fe- und Co-Clustern in guter Übereinstimmung mit Stern-Gerlach-Experimenten stehen. Die Wechselwirkung der Cluster mit der Oberfläche des Graphits führt bereits in den XAS-Absorptionsprofilen der L-Kanten zu sichtbaren Veränderungen in Form und energetischer Position der Absorptionsresonanzen. Alle untersuchten Cluster erfahren gleichzeitig eine starke Reduktion ihrer magnetischen Momente, häufig bis unter die Nachweisgrenze. Unter diesen Umständen ist es durchaus angebracht, von einer starken Cluster-Substrat-Wechselwirkung auszugehen. Dieser Befund wird durch die mittels Photoelektronenspektroskopie erzielten Ergebnisse untermauert. Veränderungen durch das "Einschalten" der Substratwechselwirkung sind sowohl in den Rumpfniveau- als auch den Valenzbandspektren zu erkennen. Charakteristisch für die ausführlicher untersuchten Ni-Cluster ist die Ausbildung einer, mit dem Graphitsubstrat hybridisierten, Elektronenstruktur mit reduzierter Zustandsdichte in der Umgebung des Ferminiveaus. Eine solche Konfiguration begünstigt die Ausbildung von "low-spin" - Zuständen, wie sie in den XMCD-Experimenten bei vorhandener Wechselwirkung mit dem Graphit gefunden werden. Die starke Kopplung der elektronischen Zustände von Cluster und Substrat äußert sich ebenfalls in dem Verlust des Fano-Resonanzverhaltens in der resonanten Photoemission an der 3p-Absorptionsschwelle. Das Fehlen der analogen Beobachtung an der 2p-Schwelle, muss einer starken Lokalisierung des 2p-rumpflochangeregten Zwischenzustandes zugeschrieben werden. Die genaue Analyse der Veränderung des resonant-Raman-Verhaltens in der 2p-RESPES könnte wertvolle komplementäre Informationen liefern, wird aber durch die Gegenwart der Argon-Valenzemission zu stark behindert, um konkrete Aussagen zuzulassen. Die Analyse der RESPES-Daten lässt den Schluss zu, dass die tatsächliche Besetzung der 3d-Zustände durch die Substratwechselwirkung nicht nennenswert verändert wird. Neben der Charakterisierung der großen magnetischen Clustermomente nach Spin- und Bahnanteilen vermitteln die Experimente dieser Arbeit einen guten Einblick in die Veränderungen der elektronischen Eigenschaften durch die Wechselwirkung mit dem Graphit. Der Einfluss des Substrates führt zu einer starken Verkleinerung der magnetischen Momente. Offensichtlich wird die elektronische Gesamtenergie an der Grenzfläche durch die Ausbildung von hybridisierten Zuständen minimiert, welche nahe der Fermienergie eine geringe Zustandsdichte besitzen. N2 - The present thesis presents investigations on the magnetism and the electronic structure of deposited 3d transition metal clusters. Clusters are being deposited into thin argon layers in order to avoid fragmentation. At the same time the argon is used as a matrix providing an environment of weak interaction. Under suitably chosen stable experimental conditions the atomic absorption multiplet is observed and the magnetic moments of Fe and Co clusters determined by XMCD compare well to those observed in gas phase experiments. Thus intrinsic magnetic cluster properties can be probed from rare gas matrix isolated clusters. At elevated x-ray photon flux densities mobility of both, rare gas atoms and clusters, is generated by the synchrotron beam and leads to noticeable changes in spectroscopic line shapes and the reduction of the magnetic moments. Besides suitable experimental conditions it is important to ascertain the applicability of the XMCD sum rules in the case of the clusters. Due to the reduced symmetry in the clusters the magnetic dipole contribution to the spin sum rule deserves particular attention. From the comparison of the total magnetic moment determined by XMCD to the one following from superparamagnetic magnetisation curves an upper limit of 10% for this contribution can be determined. As expected the spin magnetic moments in Fe and Co clusters exceed those of the corresponding bulk materials. They do not, however, reach the values of the total magnetic moments determined from Stern-Gerlach deflection experiments. The electronic structure of Ni clusters proves to be particulary sensitive with respect to the interaction with foreign atoms. Therefore the gas phase magnetic moments cannot be reproduced in the present experiments. Common to all clusters within the argon film is a strong enhancement of the orbital contribution to the total magnetic moment, generally above 20%. This observation of strong orbital moments bridges the gap between calculated spin magnetic moments an experimental total moments. In particular we find good agreement of the total magnetic moments determined in the present work compared to those of Stern-Gerlach experiments. When the clusters interact with the graphite surface noticeable changes occur in both, the spectral shape and the energy positions of the L edge resonance profiles, respectively. All clusters investigated undergo a strong reduction of their magnetic moments under these conditions. It is therefore appropriate to consider the cluster substrate interaction to be considerable. This finding is further substantiated by the experimental results obtained by photoelectron spectroscopy. The substrate interaction leads to visible changes in the core level as well as the valence band spectra. For Ni clusters the latter reveal the formation of a hybridised electronic structure with a reduced density of states in the vicinity of the Fermi level. Such an electronic configuration favors the formation of low spin states which are indeed observed for the clusters interacting with graphite. The strong coupling of cluster an substrate electronic states is also reflected by the loss of the fano line shape in the 3p resonant photoemission signal. This observation does not hold for the RESPES at the 2p-threshold, however. This apparent discrepancy is attributed to a strongly localised core excited intermediate state at the 2p edge. While the detailed analysis of the resonant raman regime could yield useful complementary information it is prevented by the strong emission from the argon valence states. Nevertheless it can be inferred from the RESPES data that the 3d occupation number in Ni clusters is not substantially altered by the substrate interaction. The experiments of this work does provide the characterisation of the cluster magnetic moments in terms of their spin and orbital contributions. In addition they provide an inside into the modifications of the electronic properties emanating from the cluster substrate interaction. The hybridisation with graphite electronic structure leads to a strong reduction of the magnetic moments. Obviously, the interfacial total energy is minimised by adopting an electronic level structure with little density of states near the Fermi level. KW - Übergangsmetall KW - Metallcluster KW - Elektronenspektroskopie KW - Cluster KW - Magnetismus KW - XMCD KW - Übergangsmetall KW - cluster KW - magnetism KW - XMCD KW - transition metal Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-18689 ER - TY - THES A1 - Hasenstab-Riedel, Sebastian T1 - The Highest Oxidation States of the 5d Transition Metals : a Quantum-Chemical Study T1 - Die höchsten Oxidationsstufen der 5d Übergangsmetalle: Eine quantenchemische Studie N2 - The theoretical work presented in this thesis is concerned with the highest possible oxidation states of the 5d transition metal row. Based on a validation study of several DFT functionals against accurate coupled-cluster CCSD(T) methods we will present calculations on a series of new high oxidation state HgIV species. Quantum-chemical calculations have also been applied to various fluoro complexes of gold in oxidation states +V through +VII to evaluate the previously claimed existence of AuF7. The calculations indicate clearly that the oxidation state (+V), e.g., in [AuF5]2, remains the highest well-established gold oxidation state. Further calculations on iridium in oxidation state (+VII) show that IrF7 and IrOF5 are viable synthetic targets, whereas higher oxidation states of iridium appear to be unlikely. Structures and stabilities of several osmium fluorides and oxyfluorides were also studied in this thesis. It is shown that homoleptic fluorides all the way up to OsF8 may exist. Combining the results of the most accurate quantum-chemical predictions of this thesis and of the most reliable experimental studies, we observe a revised trend of the highest oxidation states of the 5d transition metal row. From lanthanum (+III) to osmium (+VIII), there is a linear increase of the highest oxidation states with increasing atomic number. Thereafter, we observe a linear descent from osmium (+VIII) to mercury (+IV). We will also present a short outlook to the transition metals of the 3d and 4d row and their highest reachable oxidation states. N2 - In der vorliegenden theoretischen Arbeit wurden mittels quantenchemischer Methoden die höchsten Oxidationsstufen der späten Übergangselemente untersucht. Um eine adäquate Beschreibung dieser Systeme zu gewährleisten, wurde zuerst eine Validierungsstudie verschiedener Dichtefunktionale, die mit hochgenauen coupled-cluster CCSD(T) Berechnungen verglichen wurden, durchgeführt. Das zugrundeliegende Referenzsystem war Quecksilber in der Oxidationsstufe +IV (HgF4, HgCl4, HgH4). Es wurden Strukturoptimierungen von Minima und Übergangszuständen, Atomisierungsenergien sowie die entsprechenden Zerfallsreaktionen für die Systeme betrachtet. Basierend auf diesen Ergebnissen konnten weitere HgIV Systeme mit sogenannten „Weakly Coordinating Anions“ wie z.B. [OTeF5]-, [AsF6]-, [Sb2F11]- usw. unter Verwendung von Dichtefunktionalmethoden untersucht werden. Die beiden Verbindungen Hg[OTeF5]4 und Hg[AsF6]4 scheinen dabei die Oxidationsstufe +IV am besten zu stabilisieren. Quantenchemische Methoden wurden ebenfalls zur Berechnung von Fluorkomplexen des Goldes in den Oxidationsstufen von +V bis +VII verwendet. Dabei wurde insbesondere überprüft, ob das angeblich experimentell gefundene AuF7 tatsächlich existiert. Es konnte gezeigt werden, dass eine Existenz von AuF7 unter den in der Literatur angegebenen Bedingungen sehr wahrscheinlich ausgeschlossen werden kann. Diese Instabilität wird ebenfalls für das quantenchemisch untersuchte AuF6 beobachtet. Somit bleibt die Oxidationsstufe +V in [AuF5]2 die höchste erreichbare Oxidationsstufe für Gold. Basierend auf coupled-cluster CCSD(T) Berechnungen konnten die Verbindungen des Iridiums in der Oxidationsstufe +VII (IrF7, IrOF5) als thermochemisch stabil vorhergesagt werden, wohingegen die höheren Iridiumverbindungen des IrVIII und IrIX sehr unwahrscheinlich sind. Außerdem wurden Strukturen und Stabilitäten verschiedener Osmiumfluoride und Oxyfluoride in dieser Arbeit diskutiert. Es konnte gezeigt werden, dass ausgehend von OsF6 auch die höheren Verbindungen OsF7 und OsF8 experimentell zugänglich sein sollten. Kombiniert man die in dieser Arbeit vorhergesagten Verbindungen in ihren höchsten Oxidationsstufen mit den verlässlichsten experimentellen Untersuchungen, so beobachtet man einen revidierten Trend der höchsten Oxidationsstufen der 5d-Übergangsmetallreihe: Direkt proportional zur Ordnungszahl steigen die höchsten Oxidationszahlen zunächst linear an, von Os (+VIII) bis hin zu Hg (+IV) kann ein linearer Abfall beobachtet werden. Abschließend werden in dieser Arbeit die höchsten Oxidationsstufen der 3d und 4d Übergangsmetalle in einer kurzen Übersicht vorgestellt. KW - Oxidationszahl KW - Übergangsmetall KW - Dichtefunktionalformalismus KW - Coupled Cluster KW - Fluoride KW - Oxidationsstufen KW - Übergangselemente KW - Dichtefunktionaltheorie KW - Coupled-Cluster KW - Fluoride KW - Oxidation states KW - Transition metals KW - Density functional theory KW - Coupled-Cluster KW - Fluorides Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-19402 ER - TY - THES A1 - Glawion, Sebastian T1 - Spectroscopic Investigations of Doped and Undoped Transition Metal Oxyhalides T1 - Spektroskopische Untersuchungen dotierter und undotierter Übergangsmetall-Oxyhalogenide N2 - In this thesis the electronic and magnetic structure of the transition metal oxyhalides TiOCl, TiOBr and VOCl is investigated. The main experimental methods are photoemission (PES) and x-ray absorption (XAS) spectroscopy as well as resonant inelastic x-ray scattering (RIXS). The results are compared to density-functional theory, and spectral functions from dynamical mean-field theory and different kinds of model calculations. Questions addressed here are those of the dimensionality of the magnetic and electronic interactions, the suitability of the oxyhalides as prototypical strongly correlated model systems, and the possibility to induce a filling-controlled insulator-metal transition. It turns out that TiOCl is a quasi-one-dimensional system with non-negligible two-dimensional coupling, while the one-dimensional character is already quite suppressed in TiOBr. In VOCl no signatures of such one-dimensional behavior remain, and it is two-dimensional. In all cases, frustrations induced by the crystal lattice govern the magnetic and electronic properties. As it turns out, although the applied theoretical approaches display improvements compared to previous studies, the differences to the experimental data still are at least partially of qualitative instead of quantitative nature. Notably, using RIXS, it is possible for the first time in TiOCl to unambiguously identify a two-spinon excitation, and the previously assumed energy scale of magnetic excitations can be confirmed. By intercalation of alkali metal atoms (Na, K) the oxyhalides can be doped with electrons, which can be evidenced and even quantified using x-ray PES. In these experiments, also a particular vertical arrangement of dopants is observed, which can be explained, at least within experimental accuracy, using the model of a so-called "polar catastrophe". However, no transition into a metallic phase can be observed upon doping, but this can be understood qualitatively and quantitatively within an alloy Hubbard model due to the impurity potential of the dopants. Furthermore, in a canonical way a transfer of spectral weight can be observed, which is a characteristic feature of strongly correlated electron systems. Overall, it can be stated that the transition metal oxyhalides actually can be regarded as prototypical Mott insulators, yet with a rich phase diagram which is far from being fully understood. N2 - In dieser Doktorarbeit wird die elektronische und magnetische Struktur der Übergangsmetall-Oxyhalogenide TiOCl, TiOBr und VOCl untersucht. Ein Hauptaugenmerk liegt dabei auf spektroskopischen Methoden wie der Photoemissions- (PES) und Röntgenabsorptions- (XAS) Spektroskopie, sowie auf resonanter inelastischer Röntgenstreuung (RIXS). Die Resultate werden mit Dichtefunktionaltheorie, sowie Spektralfunktionen aus dynamischer Molekularfeldtheorie und verschiedenen Modellrechnungen verglichen. Die hauptsächlich zu klärenden Fragestellungen waren die der Dimensionalität magnetischer und elektronischer Wechselwirkungen, die Eignung der Oxyhalogenide als prototypische, stark korrelierte Modellsysteme, sowie die MÄoglichkeit, einen bandfüllungsinduzierten Isolator-Metall-Übergang zu erreichen. Es zeigt sich, dass TiOCl ein quasi-eindimensionales System mit nicht zu vernachlässigender zweidimensionaler Kopplung darstellt, während der eindimensionale Charakter bei TiOBr bereits stärker unterdrückt ist. In VOCl sind schließlich keine Anzeichen eindimensionalen Verhaltens mehr erkennbar, es handelt sich also um ein zweidimensionales System. In allen Fällen spielen die durch das Gitter verursachten Frustrationen eine Rolle bei der Beschreibung der elektronischen und magnetischen Eigenschaften, und es stellt sich heraus, dass die verwendeten theoretischen Ansätze zwar eine Verbesserung im Vergleich zu früheren Studien bringen, die Unterschiede zu den experimentellen Daten aber weiterhin zumindest teilweise qualitativ und nicht nur quantitativ sind. Bemerkenswert ist, dass mithilfe von RIXS erstmals in TiOCl eine Zwei-Spinon-Anregung identifiziert, und dadurch die bisher angenommene Energieskala magnetischer Anregungen in TiOCl bestätigt werden kann. Durch Interkalation von Alkaliatomen (Na, K) können die Oxyhalogenide mit Elektronen dotiert werden, was sich anhand von Röntgen-PES zeigen und sogar quantitativ auswerten lässt. Dabei zeigt sich eine bestimmte vertikale Verteilung der Dotieratome, welche im Rahmen der experimentellen Genauigkeit durch das Modell einer sog. "Polaren Katastrophe" erklärt werden kann. Allerdings kann kein Übergang in eine metallische Phase beobachtet werden, doch dies lässt sich im Rahmen eines Legierungs-Hubbard-Modells, induziert durch das Störpotential der Dotieratome, qualitativ und quantitativ verstehen. Weiterhin zeigt sich in modellhafter Art und Weise ein Transfer von spektralem Gewicht, ein charakteristisches Merkmal stark korrelierter Elektronensysteme. Letztlich kann man den Schluss ziehen, dass die Übergangsmetall-Oxyhalogenide tatsächlich als prototypische Mott-Isolatoren aufgefasst werden können, die jedoch gleichzeitig ein reiches und bei weitem nicht vollständig verstandenes Phasendiagramm aufweisen. KW - Übergangsmetall KW - Oxidhalogenide KW - Spektroskopie KW - Mott-Isolator KW - Hubbard-Modell KW - Legierungs-Hubbard-Modell KW - Elektronenkorrelation KW - Photoemission KW - Inelastische Röntgenstreuung KW - Röntgenabsorption KW - Mott insulator KW - Hubbard model KW - alloy Hubbard model Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53169 ER - TY - THES A1 - Damme, Alexander T1 - Reaktivität von Diboranen(4) gegenüber metallischen und nicht-metallischen Lewis-Basen T1 - Reactivity of Diboranes(4) towards metal and non-metal Lewis-Bases N2 - Die Reaktivität von Diboranen(4) (1,2-Dihalogendiboranen(4)) gegenüber von metallischen und nicht-metallischen Lewis-Basen wurde untersucht. Die Ergebnisse zeigen, dass die oxidative Addition einer Bor-Halogen-Bindung an ein Platin(0)-Komplex selektiv verläuft und in trans-Diboran(4)yl-Bisphosphan-Platin-Komplexen resultiert. Bei Verwendung von 1,2-Dihalogen-1,2-diaryldiboranen(4) findet sich in den korrespondierenden trans-Diboran(4)yl-Platin-Komplexen eine dative Bindung des Platin-Zentralatoms zum entfernten zweiten Bor-Atom, welche sowohl in Lösung als auch im Festkörper beobachtet wird. Die erhaltenen trans-Diboran(4)yl-Komplexe wurden auf ihre Reaktivität untersucht, hierbei konnte erstmals durch Reduktion ein Diboren-Platin-Komplex synthetisiert werden. Die Untersuchung der Reaktivität von nicht-metallischen Lewis-Basen ergab eine Reihe von sp2-sp3-Diboranen an die entweder PEt3 oder PMeCy2 koordiniert ist. In Abhängigkeit des sterischen Anspruches finden sich zwei Isomere mit 1,2- und 1,1'-Anordnung der Halogene. Die 1,2-Isomere zeigen hierbei im Festkörper eine Bor-Halogen-Bor-Brücke mit einer dativen Halogen-Bor-Bindung zwischen dem Halogen und dem sp2-Borzentrum. N2 - The reactivity of diboranes(4) (1,2-dihalodiboranes(4)) towards metal and non-metal Lewis-Bases was examined. The results have shown that the oxidative addition of the boron-halide bond to a platinum center results exclusively in the corresponding trans-diboran(4)yl-bisphosphane-platinum complexes. Using 1,2-dihalo-1,2-diaryldiboranes(4) for the oxidative addition to platinum(0) reveals the corresponding trans-diboran(4)yl platinum complexes with a dative platinum boron bond to the remoted boron atom of the diboran(4)yl ligand. This structural motive can be found in solution as well as in the solid state. The reactivity of the obtained trans-diboran(4)yl-platinum complexes were investigated. Here a diborene-platinum complex was synthesized for the first time by reduction chemistry. The investigation of the reactivity of diboranes(4) toward non-metal Lewis-Bases, such as PEt3 or PMeCy2, lead to sequence of sp2–sp3 phosphine adducts of diboranes. Depending on the steric demand of the used phosphanes two isomers were identified and characterized. The isomers distinguish between the 1,2- and 1,1’-substitutions pattern of the halides, which are formed by a 1,2-rearrengment, which is favoured for the bulky PMeCy2. In the solid state the 1,2-isomers are showing a boron-halide-boron bridge and a rare dative boron-halide bonding interaction to the sp2 boron center. KW - Diborane KW - Übergangsmetallkomplexe KW - Lewis-Base KW - Diboran(4) KW - Diboren KW - Diboran(4)yl-Platin-Komplex KW - Übergangsmetallkomplexe KW - sp2-sp3 Diborane KW - Bor KW - Platin KW - Anorganische Chemie KW - Übergangsmetall KW - diborane(4) KW - diboren KW - diboran(4)yl platinum complex KW - transition metal complex KW - sp2-sp3 diboranes Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-77750 ER - TY - THES A1 - Burzler, Michael T1 - Synthese, Struktur und Reaktivität von Borylenkomplexen des Mangans T1 - Synthesis, structure and reactivity of borylene complexes of manganese N2 - Im Rahmen dieser Doktorarbeit sind neue Borylenkomplexe synthetisiert worden, die am Boratom keinen pi-Donor tragen und eine umfangreiche Chemie ermöglichen. Zum Beispiel wurde eine [2+2]-Cycloaddition und eine Metathesereaktion eines Borylenkomplexes beobachtet. Ebenfalls wurde ein stabiles Bornucleophil erhalten. N2 - In this thesis, novel borylene complexes without pi-donor ligands at the boron atom were synthesised, allowing a diverse further chemistry. For example a [2+2]-cycloaddition and metathesis reaction of a borylene complex was observed. In addition a stable boron nucleophile was obtained. KW - Bor KW - Übergangsmetall KW - Mangan KW - Komplexe KW - Nucleophil KW - Borylenkomplex KW - nucleophile KW - borylene complex Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26377 ER - TY - THES A1 - Bauer, Florian T1 - Untersuchungen zur Diborierung ungesättigter Systeme mit [2]Borametalloarenophanen T1 - Studies on the Diboration of unsaturated Systems with [2]Borametalloarenophanes N2 - Im Rahmen dieser Arbeit wurde die Übergangsmetall-katalysierte Diborierung verschiedener ungesättigter Substrate untersucht. Die Diborierung von Dialkinen ermöglichte die Synthese einer Reihe neuer Verbindungen, welche sich in drei Gruppen einteilen lassen: i) Einkernige [4]Diboradicarbaferrocenophane, die zusätzlich entweder direkt oder über einen Spacer eine CC Dreifachbindung tragen; ii) zweikernige Komplexe, bei denen das [4]Ferrocenophanfragment über die zweite CC Dreifachbindung an ein niedervalentes Platinfragment koordiniert ist und iii) zweikernige Bis [4]diboradicarbaferrocenophane durch die Diborierung beider Dreifachbindungen des Dialkins. Von den vier Vertreter von Gruppe i) ist bei zweien die zweite CC Dreifachbindung direkt an die Bis(boryl)alkeneinheit gebunden, während bei den anderen eine Spacergruppe vorhanden ist. Die Darstellung der Komplexe kann entweder durch katalytische Diborierung der Dialkine durch [Fe{C5H4B(NMe2)}2] oder durch direkte Umsetzung mit [Fe{C5H4B(NMe2)}2Pt(PEt3)2] erfolgen. Hingegen führt die Umsetzung von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] mit äquimolaren Mengen Dialkin zur Bildung der zweiten Verbindungen von Gruppe ii). Hier ist die zweite CC Dreifachbindung an ein [Pt(PEt3)2] Fragment koordiniert, wodurch ein Platinalkinkomplex entsteht. Unter den Produkten der Gruppe iii) sind zuerst die Komplexe zu nennen, die zwei Ferrocenophangruppen tragen. Die so synthetisierten Produkte weisen jeweils zwei chirale Ebenen auf und wurden deshalb als Diastereomerenpaare erhalten. Es konnte gezeigt werden, dass die einzelnen Diastereomere durch Erhitzen in Lösung ineinander umgewandelt werden können. Mittels DFT-Rechnungen konnte zudem ein plausibler Mechanismus aufgedeckt werden. Neben den Bis [4]ferrocenophanen wurde ein Komplex dargestellt, in dem ein [4]Diboradicarbaferrocenophanfragment über eine Spacerfunktion an einen entsprechenden von Bis(benzol)chrom abgeleiteten Metalloarenophanrest gebunden ist. Weiterhin wurden durch Umsetzung von [Pt(PEt3)3] mit den entsprechenden Dialkinen in unterschiedlicher Stöchiometrie jeweils drei einkernige bzw. zweikernige Platinalkinkomplexe sowie ein Platinalkenkomplex synthetisiert. Die IR-spektroskopischen Untersuchungen legen die Formulierung als Platinacyclopropene bzw. Platinacyclopropane nahe. Durch die Diborierung von Isocyaniden konnte unter bemerkenswert milden Reaktionsbedingungen eine Reihe von chiralen, einkernigen Bis(boryl)iminokomplexen dargestellt werden. Die Synthese verläuft entweder durch direkte Umsetzung der Diborane(4) mit den entsprechenden Isocyaniden oder, mit verlängerten Reaktionszeiten auch durch Diborierung der Isocyanide mittels der entsprechenden [3]Metalloarenophane. Durch Umsetzung von [2]Borametalloarenophanen mit Diisocyaniden konnten zudem verschiedene zwei- bzw. dreikernige Bis(boryl)iminokomplexe zugänglich gemacht werden. Die hierzu ausgewählten Diisocyanide tragen wiederum eine Spacereinheit zwischen den beiden NC Funktionalitäten. Genau wie bei den Reaktionen von Dialkinen treten auch hier die Produkte als Paare von Diastereomeren auf. Ein weiteres Projekt beschäftigte sich mit der oxidativen Addition von [Fe{C5H4B(NMe2)}2] an verschiedene Übergangsmetallkomplexe. Die Umsetzungen führten allerdings in keinem Fall zur Bildung der gewünschten Bis(boryl)metallkomplexe. Bei verschiedenen Platinkomplexen kann jedoch die Bildung eines einheitlichen Produkts beobachtet werden. Es wird deshalb in Übereinstimmung mit den spektroskopischen Daten vermutet, dass es sich dabei um ein [2.2]Diboraferrocenophan handelt. Eine saubere Isolierung des Produkts gelingt jedoch nicht, weshalb der strukturelle Nachweis bislang nicht geführt werden kann. Abschließend konnte dabei gezeigt werden, dass mehrtägiges Erhitzen von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] in Lösung hochselektiv zur Bildung des mutmaßlichen [2.2]Diboraferrocenophans führt. Weiterhin ist auch die Umsetzung von [Fe{C5H4B(NMe2)}2] mit katalytischen Mengen [Pt{P(CH2Cy)3}2] erfolgreich, führte jedoch nicht zu einer Isolierung des Produkts in Substanz. N2 - In the course of this work the transition metal-catalyzed diboration of unsaturated substrates has been studied in detail, while the main part was concerned with the functionalization of dialkynes. A number of new compounds were prepared featuring one of the following structural motifs: i) mononuclear [4]diboradicarbaferrocenophanes bound to a pendant CC triple bond either directly or via spacer, ii) related dinuclear complexes, in which the adjacent triple bond is coordinated toward a low-valent platinum fragment, and iii) dinuclear bis [4]diboradicarbaferrocenophanes formed by double diboration of the dialkyne. Four representatives of the first group were synthesized; two of them having the second CC triple bond bound directly to the bis(boryl)alkene unit, while for the other two a spacer group is present. The preparation of the complexes can either be accomplished by diboration via [Fe{C5H4B(NMe2)}2] using a catalytic amount of [Pt(PEt3)3] or by direct functionalization of the dialkynes with the [Fe{C5H4B(NMe2)}2Pt(PEt3)2]. Two species of the group ii) were obtained by reaction of the dialkynes with an equimolar amount of [Fe{C5H4B(NMe2)}2Pt(PEt3)2]. In this case, the second triple bond of the dialkyne is coordinated to a [Pt(PEt3)2] fragment, thus forming a platinum alkyne complex. Among the products of the last group are complexes bearing two ferrocenophane fragments featuring two chiral planes each and, therefore, being formed as pairs of diastereomers. The single diastereomers can be interconverted by heating in solution. A plausible mechanism was deduced from DFT calculations. Along with these bis [4]ferrocenophanes, a complex was synthesized in which the [4]ferrocenophane fragment is bound to a metalloarenophane moiety derived from bis(benzene)chromium via a spacer unit. In addition, the reaction of [Pt(PEt3)3] with the aforementioned dialkynes was studied for different stoichiometries, yielding three mononuclear and three dinuclear platinum alkyne complexes along with one platinum alkene complex. IR spectroscopic data suggest the formulation as platinacyclopropenes or –propane, respectively. Four mononuclear, chiral bis(boryl)imines were obtained by diboration of two different dialkynes under remarkably mild reaction conditions. The synthesis can be conducted either directly by reacting the diboranes(4) with the respective isocyanide, or  with prolonged reaction times – by diboration of the isocyanide via the corresponding [3]metalloarenophanes, respectively. The reaction of the [2]borametalloarenophanes with diisocyanides led to a series of dinuclear and trinuclear bis(boryl)imines. The chosen diisocyanides have a spacer unit between the two NC functionalities. In analogy to the related reactions with dialkynes, the products were formed as pairs of diastereomers. The oxidative addition of [Fe{C5H4B(NMe2)}2] toward different transition-metal complexes was also studied. However the formation of the envisaged bis(boryl)metal complexes could not be observed in any case. Interestingly, for different three platinum complexes a well-defined product was formed. In agreement with the spectroscopic parameters, the product most probably represents a [2.2]diboraferrocenophane, the formal dimerization product of [Fe{C5H4B(NMe2)}2]. Thus, heating [Fe{C5H4B(NMe2)}2Pt(PEt3)2] in solution for several days afforded this product highly selective. The reaction of [Fe{C5H4B(NMe2)}2] with catalytic amounts of [Pt{P(CH2Cy)3}2] leads to the same result. However, the product could not be isolated analytically pure. KW - Ferrocen KW - Sandwich-Verbindungen KW - Bor KW - Platin KW - Alkine KW - Heterogene Katalyse KW - Homogene Katalyse KW - Übergangsmetall KW - Cyclovoltammetrie KW - Diborierung KW - Diboration Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57209 ER -