TY - THES A1 - Scharnagl, Julian T1 - Distributed Guidance, Navigation and Control for Satellite Formation Flying Missions T1 - Verteilte Leit- und Regelungsverfahren für Satellitenformationen N2 - Ongoing changes in spaceflight – continuing miniaturization, declining costs of rocket launches and satellite components, and improved satellite computing and control capabilities – are advancing Satellite Formation Flying (SFF) as a research and application area. SFF enables new applications that cannot be realized (or cannot be realized at a reasonable cost) with conventional single-satellite missions. In particular, distributed Earth observation applications such as photogrammetry and tomography or distributed space telescopes require precisely placed and controlled satellites in orbit. Several enabling technologies are required for SFF, such as inter-satellite communication, precise attitude control, and in-orbit maneuverability. However, one of the most important requirements is a reliable distributed Guidance, Navigation and Control (GNC) strategy. This work addresses the issue of distributed GNC for SFF in 3D with a focus on Continuous Low-Thrust (CLT) propulsion satellites (e.g., with electric thrusters) and concentrates on circular low Earth orbits. However, the focus of this work is not only on control theory, but control is considered as part of the system engineering process of typical small satellite missions. Thus, common sensor and actuator systems are analyzed to derive their characteristics and their impacts on formation control. This serves as the basis for the design, implementation, and evaluation of the following control approaches: First, a Model Predictive Control (MPC) method with specific adaptations to SFF and its requirements and constraints; second, a distributed robust controller that combines consensus methods for distributed system control and $H_{\infty}$ robust control; and finally, a controller that uses plant inversion for control and combines it with a reference governor to steer the controller to the target on an optimal trajectory considering several constraints. The developed controllers are validated and compared based on extensive software simulations. Realistic 3D formation flight scenarios were taken from the Networked Pico-Satellite Distributed System Control (NetSat) cubesat formation flight mission. The three compared methods show different advantages and disadvantages in the different application scenarios. The distributed robust consensus-based controller for example lacks the ability to limit the maximum thrust, so it is not suitable for satellites with CLT. But both the MPC-based approach and the plant inversionbased controller are suitable for CLT SFF applications, while showing again distinct advantages and disadvantages in different scenarios. The scientific contribution of this work may be summarized as the creation of novel and specific control approaches for the class of CLT SFF applications, which is still lacking methods withstanding the application in real space missions, as well as the scientific evaluation and comparison of the developed methods. N2 - Die anhaltenden Veränderungen in der Raumfahrt – die fortschreitende Miniaturisierung, die sinkenden Kosten für Raketenstarts und Satellitenkomponenten sowie die verbesserten Rechen- und Steuerungsmöglichkeiten von Satelliten – fördern den Satelliten-Formationsflug (SFF) als Forschungs- und Anwendungsgebiet. SFF ermöglicht neue Anwendungen, die mit herkömmlichen Einzelsatellitenmissionen nicht (oder nicht mit vertretbarem Aufwand) realisiert werden können. Insbesondere verteilte Erdbeobachtungsanwendungen wie Photogrammetrie und Tomographie oder verteilte Weltraumteleskope erfordern präzise positionierte und kontrollierte Satelliten in der Umlaufbahn. Für den SFF sind verschiedene Basistechnologien erforderlich, z. B. Kommunikation zwischen den Satelliten, präzise Lageregelung und Manövrierfähigkeit. Eine der wichtigsten Anforderungen sind jedoch zuverlässige verteilte Leit- und Regelungsverfahren (Guidance, Navigation and Control, GNC). Diese Arbeit befasst sich mit dem Thema der verteilten GNC für SFF in 3D mit dem Schwerpunkt auf Satelliten mit kontinuierlichem, niedrigen Schub (Continuous Low-Thrust, CLT) z.B. mit elektrischen Triebwerken und legt den Fokus hier zusätzlich auf niedrige kreisförmige Erdumlaufbahnen. Der Schwerpunkt dieser Arbeit liegt jedoch nicht nur auf der Regelungstheorie, vielmehr wird Regelung als Teil des Systementwicklungsprozesses typischer Kleinsatellitenmissionen betrachtet. So werden gängige Sensor- und Aktuatorsysteme analysiert, um ihre Eigenschaften und ihre Auswirkungen auf die Formationskontrolle abzuleiten. Dies dient als Grundlage für den Entwurf, die Implementierung und die Bewertung der folgenden Regelungsansätze: Erstens eine Modellprädiktive Regelung (Model-Predictive Control, MPC) mit spezifischen Anpassungen an die Anforderungen und Beschränkungen des SFFs, zweitens ein robuster Regler, der Konsensmethoden für die Steuerung verteilter Systeme mit robuster $H_{\infty}$-Regelung kombiniert, und schließlich ein kaskadierter Regler, der zur Steuerung die Regelstrecke invertiert und dessen Referenz von einem Referenzregler auf einer optimalen Trajektorie unter Berücksichtigung verschiedener Beschränkungen zum Ziel gesteuert wird. Die entwickelten Regler werden auf der Grundlage umfangreicher Softwaresimulationen validiert und miteinander verglichen. Realistische 3D-Formationsflug-Szenarien wurden der NetSat-Formationsflug-Mission entnommen. Die drei verglichenen Methoden zeigen unterschiedliche Vor- und Nachteile in den verschiedenen Anwendungsszenarien. Der verteilten robusten konsensbasierten Regelung fehlt bspw. die Fähigkeit, den maximalen Schub zu begrenzen, sodass sie nicht für Satelliten mit CLT geeignet ist. Aber sowohl der MPC-basierte Ansatz als auch der auf der Invertierung der Regelstrecke basierende Ansatz sind für CLT SFF-Anwendungen geeignet und weisen wiederum ander Vor- und Nachteile in unterschiedlichen Szenarien auf. Der wissenschaftliche Beitrag dieser Arbeit besteht in der Entwicklung neuartiger und spezifischer Regelungsansätze für die Klasse der CLT-SFF-Anwendungen, für die es noch keine Methoden gibt, die der Anwendung in realen Weltraummissionen standhalten, sowie in der wissenschaftlichen Bewertung und dem Vergleich der entwickelten Methoden. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 26 KW - Kleinsatellit KW - Low Earth Orbit KW - Verteiltes System KW - Modellprädiktive Regelung KW - Dezentrale Regelung KW - Satellite Formation Flying KW - Distributed Satellite Systems KW - Low Earth Orbit KW - Model Predictive Control KW - Distributed Control Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-287530 SN - 978-3-945459-42-3 ER - TY - THES A1 - Hess, Martin T1 - Motion coordination and control in systems of nonholonomic autonomous vehicles T1 - Bewegungskoordination und Regelung in Gruppen nichtholonomer autonomer Fahrzeuge N2 - This work focuses on coordination methods and the control of motion in groups of nonholonomic wheeled mobile robots, in particular of the car-like type. These kind of vehicles are particularly restricted in their mobility. In the main part of this work the two problems of formation motion coordination and of rendezvous in distributed multi-vehicle systems are considered. We introduce several enhancements to an existing motion planning approach for formations of nonholonomic mobile robots. Compared to the original method, the extended approach is able to handle time-varying reference speeds as well as adjustments of the formation's shape during reference trajectory segments with continuously differentiable curvature. Additionally, undesired discontinuities in the speed and steering profiles of the vehicles are avoided. Further, the scenario of snow shoveling on an airfield by utilizing multiple formations of autonomous snowplows is discussed. We propose solutions to the subproblems of motion planning for the formations and tracking control for the individual vehicles. While all situations that might occur have been tested in a simulation environment, we also verified the developed tracking controller in real robot hardware experiments. The task of the rendezvous problem in groups of car-like robots is to drive all vehicles to a common position by means of decentralized control laws. Typically there exists no direct interaction link between all of the vehicles. In this work we present decentralized rendezvous control laws for vehicles with free and with bounded steering. The convergence properties of the approaches are analyzed by utilizing Lyapunov based techniques. Furthermore, they are evaluated within various simulation experiments, while the bounded steering case is also verified within laboratory hardware experiments. Finally we introduce a modification to the bounded steering system that increases the convergence speed at the expense of a higher traveled distance of the vehicles. N2 - Diese Arbeit befasst sich mit Methoden zur Bewegungskoordination und Regelung in Gruppen autonomer, nichtholomer Fahrzeuge, wobei vornehmlich autoähnliche mobile Roboter betrachtet werden. Diese Fahrzeuge sind besonders eingeschränkt in ihrer Bewegungsfreiheit. Im Hauptteil der Arbeit werden die Probleme der Formationsbewegung und des Rendezvous in Gruppen verteilter Fahrzeuge betrachtet. Für ein bestehendes Verfahren zur Bewegungsplanung für Formationen nichtholonomer, mobiler Fahrzeuge werden eine Reihe von Verbesserungen vorgestellt. Diese ermöglichen dem erweiterten Verfahren den Umgang mit Referenztrajektorien mit nicht-konstanter Geschwindigkeit und stetig differenzierbarer Krümmung. Außerdem werden im Gegensatz zum ursprünglichen Ansatz unerwünschte Sprungstellen in den Geschwindigkeits- und Krümmungsprofilen der Fahrzeuge vermieden. Desweiteren wird in dieser Arbeit das Schneeräumen auf Flughafenrollfeldern mittels Formationen autonomer Schneepflugfahrzeuge diskutiert. Dabei werden Lösungen für die Teilprobleme Bewegungsplanung der Formationen und Spurführungsregelung der einzelnen Fahrzeuge vorgestellt. Zusätzlich zu den durchgeführten Simulationen werden außerdem die Ergebnisse von Hardwareexperimenten mit der entwickelten Spurführungsregelung präsentiert. Das Rendezvous-Problem in Gruppen autoähnlicher Roboter besteht darin, die Fahrzeuge durch dezentrale Regelgesetze zu einer gemeinsamen Position in der Ebene zu bewegen. Dabei besteht typischerweise keine direkte Interaktionsverbindung zwischen allen Fahrzeugen der Gruppe. In dieser Arbeit werden verteilte Rendezvous-Regelgesetze für Fahrzeuge mit unbeschränktem und mit beschränktem Lenkwinkel eingeführt und deren Konvergenzeigenschaften mit Methoden zur Stabilitätsanalyse nicht-linearer Systeme untersucht. Die vorgestellten Regelsysteme werden weiterhin anhand von Simulationen und Hardwareexperimenten verifiziert. Schließlich wird noch eine Erweiterung des Systems für Fahrzeuge mit beschränktem Lenkwinkel vorgestellt, welches die Konvergenzgeschwindigkeit auf Kosten der zurückgelegten Distanz der Fahrzeuge erhöht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 2 KW - Robotik KW - Autonomer Roboter KW - Mobiler Roboter KW - Bewegungskoordination KW - Dezentrale Regelung KW - Nichtlineare Regelung KW - Rendezvous KW - Kooperierende mobile Roboter KW - Formationsbewegung KW - Nichtholonome Fahrzeuge KW - Mehrfahrzeugsysteme KW - Unstetige Regelung KW - Autonomous multi-vehicle systems KW - multi-vehicle formations KW - multi-vehicle rendezvous KW - car-like robots KW - nonholonomic vehicles Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46442 SN - 978-3-923959-55-6 ER -