TY - THES A1 - Hösl, Daniel T1 - In vitro- Untersuchungen zur Biokompatibilität und antibakteriellen Wirksamkeit von silber-dotierten Tricalciumphosphat-Zementen T1 - In vitro- studies on the biocompatibility and antibacterial activity of silver-doped tricalcium phosphate cements N2 - Gegenstand der vorliegenden Arbeit war die Modifikation von Hydroxylapatit- und Bruschit-Zementen mit 1 % Silber. Ziel war es, den Zementen eine antibakterielle Wirksamkeit bei gleichzeitiger Biokompatibilität ohne Beeinträchtigung ihrer mechanischen Eigenschaften zu verleihen. Durch Mischung von silberdotiertem β-TCP mit Calcium-bis-dihydrogenphosphat Monohydrat (MCPM) bzw. von silberdotiertem α-TCP mit einer 2,5%-Na2HPO4-Lösung entstanden Zementformulierungen, deren Silberfreisetzung, Druckfestigkeit, Abbindezeit sowie Phasenzusammensetzung bestimmt wurde. Desweiteren wurden in vitro-Untersuchungen zur Evaluation der Zytotoxizität mittels Osteoblasten sowie der antibakteriellen Eigenschaften mittels Staph. aureus und Staph. epidermidis durchgeführt. Bei der massenspektrometrischen Analyse der Auslagerungsmedien legte Ag-Bruschit im LB-Medium mit kumulativ 184,5 µg nach 7 Tagen das höchste Freisetzungsverhalten im Vergleich zu Ag-Hydroxylapatit mit 36,8 µg an den Tag; außerdem konnte gezeigt werden, dass sich das molare Verhältnis von Ag+/Ca2+ von theoretisch 1 % bereits bei der Herstellung von Ag+-dotiertem α- bzw. β-TCP auf je 0,78 % reduziert hatte. Die Untersuchung der Phasenzusammensetzung der Zemente wies auf die für die Zemente charakteristischen Beugungsmuster hin. Peaks, die auf Silber hinweisen würden, konnten nicht nachgewiesen werden. Betrachtet man die Druckfestigkeit, konnte der silberdotierte Bruschit-Zement eine leichte Steigerung um 5,1 MPa auf 19,8 MPa erfahren, während der Ag-Hydroxylapatit-Zement nahezu eine Halbierung seiner Festigkeit um 18,5 MPa auf 22,7 MPa erfahren musste. Bei der Auswertung der Versuchsergebnisse wies Ag-Bruschit einen signifikanten bakteriziden Effekt auf, führte aber auch zu einer Reduktion der Osteoblasten auf dieser Oberfläche. Ag-Hydroxylapatit zeigte hingegen nur eine geringe Wirkung gegen die Bakterien, während die Verbindung in dieser in vitro-Studie eher biokompatibel auf die Zellen wirkte. Die in dieser Arbeit modifizierten Zemente sind aufgrund ihrer nicht einheitlichen Ergebnisse hinsichtlich der antibakteriellen Wirksamkeit sowie der wünschenswerten Biokompatibilität für den Einsatz als Knochenersatzmaterial noch nicht geeignet. Die von Ag-Bruschit freigesetzte bakterizide Silbermenge ist für eukaryotische Zellen zu hoch, sodass in weiterführenden Studien diese Freisetzung begrenzt werden müsste. N2 - The present work was the modification of hydroxyapatite and brushite cements with 1% silver. The aim was to give the cement an anti-bacterial activity simultaneously with a biocompatibility without compromising their mechanical properties. Cement formulations, of which the release of silver ions, compressive strength, setting time and phase composition were determined, emerged by mixing silver-doped β-TCP with calcium bis-dihydrogen phosphate monohydrate (MCPM) or by silver-doped α-TCP with a 2.5% Na2HPO4 solution. Furthermore, in vitro- studies were performed to evaluate the cytotoxicity by osteoblasts, and the antibacterial properties using Staph. aureus and Staph. epidermidis. In the mass spectrometric analysis of the outsourcing media, Ag brushite in LB-medium with cumulative 184.5 µg after 7 days, demonstrated the highest release behavior as compared to Ag-hydroxyapatite with 36.8 µg; it also could be shown that the molar ratio of Ag+/ Ca2+ of theoretically 1% had already reduced to 0.78% in the production of Ag+-doped α- and β-TCP. The investigation of the phase composition of the cements showed the characteristic diffraction pattern for these cements. Peaks, which would indicate silver, could not be detected. Considering the compressive strength, the silver-doped brushite cement had shown a slight increase of 5.1 MPa to 19.8 MPa, while the Ag-hydroxyapatite cement had experienced a near halving of its strength of 18.5 MPa to 22.7 MPa. When evaluating the test results, Ag-brushite presented a significant bactericidal effect, but also led to a reduction of osteoblasts on the surface. Ag-hydroxyapatite offered a little effect against the bacteria, while the compound in this in vitro- study had more biocompatible to the cells. The modified cements in this study are, due to their non-uniform results in terms of antibacterial efficacy as well as the desirable biocompatibility, not suitable for the use as a bone substitute material. The release of Ag-brushite bactericidal amount of silver for eukaryotic cells is too high, so this release should be limited in further studies. KW - Bruschit KW - Hydroxylapatit KW - Silber KW - Biokompatibilität KW - antibakteriell KW - Tricalciumphosphat KW - Knochenzement KW - brushite KW - hydroxyapatite KW - silver KW - biocompatibility KW - antibacterial Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52383 ER - TY - THES A1 - Klarner, Michael T1 - 3D-Pulverdruck von Calciumphosphat-Keramiken mit polymeren und anorganischen Bindersystemen T1 - Polymer and inorganic 3D-rapid prototyping systems to build calciumphospate-ceramics N2 - Die vorliegende Arbeit hatte die Herstellung phasenreiner ß-Tricalciumphosphat (ß-TCP) - Implantate durch 3D-Pulverdruck zum Ziel. Variiert wurden hierbei die zum Druck verwendeten Pulver-Binder-Systeme. Als Verfestigungsmechanismen wurden hydraulisch abbindende Pulver-Binder-Systeme aus Tricalciumphosphat / Phosphorsäure bzw. Tetracalciumphosphat / Citronensäure untersucht, sowie der Zusatz quellfähiger Polymere zum Pulver, etwa Polyacrylsäure oder Hydroxypropylmethyl-Cellulose. Die gedruckten Strukturen wurden anschließend in Hinblick auf die zu erreichende Auflösung, die mechanischen Eigenschaften und die Zusammensetzung des Endproduktes verglichen. N2 - Custom made ß-tricalcium phosphate (ß-TCP) bone substitutes with a macroporous architecture were fabricated in this study using 3D powder printing with three different preparation strategies and analysed with regard to their mechanical and physical properties. Samples were either obtained by (A) using hydroxypropylmethylcellulose (5wt%) modified TCP (Ca/P=1.5) powder with water as a binder, (B) by using phosphoric acid (10%) as a binder with a calcium phosphate powder of a Ca/P ratio of 1.7 and different binder/volume ratios or (C) by printing a tetracalcium phosphate (Ca/P=2.0) / dicalcium phosphate (Ca/P=1.0) / tricalcium phosphate powder mixture with citric acid (25wt%). The production process was followed by a heat treatment at 1100°C for all variations to produce phase pure ß-TCP (Ca/P=1.5). The results showed that ß-TCP samples fabricated according to method (B) showed the best printing resolution with a minimum macropore diameter of approximately 500µm and a compressive strength of up to 7.4 ± 0.7 MPa. Since the samples could be removed from the powder bed immediately after printing, this method would significantly decrease processing time for commercial fabrication. KW - Rapid Prototyping KW - Biomaterial KW - 3D-Pulverdruck KW - Calciumphosphat KW - Tricalciumphosphat KW - Knochenersatzwerkstoff KW - Biokompatibel KW - ß-tricalcium phosphate KW - beta TCP KW - 3D - rapid prototyping KW - bone substitute Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36373 ER - TY - THES A1 - Krönung, Mariusz T1 - Untersuchungen zum Abbindeverhalten und den mechanischen Eigenschaften von Bruschit-bildenden mineralischen Knochenzementen T1 - Inquiries to the setting reaction and mechanical properties of a brushite forming mineral bone cement N2 - Ziel der vorliegenden Arbeit war die Untersuchung des Abbindeverhaltens, der Verarbeitungsqualität und der mechanischen Eigenschaften von Bruschit- bildenden, mineralischen Knochenzementen auf der Basis von ß- Tricalciumphosphat. Die Zemente stellen eine interessante Materialklasse für den Knochenersatz dar, da sie im Gegensatz zu marktgängigen Hydroxylapatit- Zementen durch ihre höhere chemische Löslichkeit im Zeitraum von 6- 12 Monaten resorbierbar sind. Zur Herstellung von ß- TCP wurden verschiedene Parameter variiert, etwa die Sinterdauer, Temperatur sowie Mahlparameter. Durch Mischung von ß-TCP mit primärem Calcium-bis-dihydrogenphosphat Hydrat (MCPM) entstanden abbindefähige Zementformulierungen, deren Druckfestigkeit, Abbindezeit und Phasenzusammensetzung bestimmt wurde. Die mechanische Testung erfolgte hierbei ohne Vorkompression der Zementpaste, so dass die Ergebnisse auch vom klinischen Anwender nachvollziehbar wären. N2 - The aim of this study was to investigate the setting reaction, the manufacturing quality and the mechanical properties of Brushite forming, mineral bone cement based on beta- tricalcium phosphate. These cements belong to a special class of bone substitute material, which provide a better chemical solvation and quicker resorption than conventional hydroxyapatite cement. Beta- TCP was produced with a variation of several parameters, such as the duration of sintering, the sintering temperature and grinding parameters. Beta- TCP / monocalcium phosphate monohydrate (MCPM) mixtures were found to set and harden like conventional hydraulic cements and were tested by their compressive strength, setting time and the phase composition. The mechanical strength was tested without pre- compression of the cement paste in order to achieve reproducible results by a clinical operator. KW - Knochenzement KW - Bruschit KW - Calziumphosphatzemente KW - Tricalciumphosphat KW - Brushite KW - Calciumphosphate cement KW - Tri- calciumphosphate Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-29284 ER -