TY - JOUR A1 - Horder, Hannes A1 - Guaza Lasheras, Mar A1 - Grummel, Nadine A1 - Nadernezhad, Ali A1 - Herbig, Johannes A1 - Ergün, Süleyman A1 - Teßmar, Jörg A1 - Groll, Jürgen A1 - Fabry, Ben A1 - Bauer-Kreisel, Petra A1 - Blunk, Torsten T1 - Bioprinting and differentiation of adipose-derived stromal cell spheroids for a 3D breast cancer-adipose tissue model JF - Cells N2 - Biofabrication, including printing technologies, has emerged as a powerful approach to the design of disease models, such as in cancer research. In breast cancer, adipose tissue has been acknowledged as an important part of the tumor microenvironment favoring tumor progression. Therefore, in this study, a 3D-printed breast cancer model for facilitating investigations into cancer cell-adipocyte interaction was developed. First, we focused on the printability of human adipose-derived stromal cell (ASC) spheroids in an extrusion-based bioprinting setup and the adipogenic differentiation within printed spheroids into adipose microtissues. The printing process was optimized in terms of spheroid viability and homogeneous spheroid distribution in a hyaluronic acid-based bioink. Adipogenic differentiation after printing was demonstrated by lipid accumulation, expression of adipogenic marker genes, and an adipogenic ECM profile. Subsequently, a breast cancer cell (MDA-MB-231) compartment was printed onto the adipose tissue constructs. After nine days of co-culture, we observed a cancer cell-induced reduction of the lipid content and a remodeling of the ECM within the adipose tissues, with increased fibronectin, collagen I and collagen VI expression. Together, our data demonstrate that 3D-printed breast cancer-adipose tissue models can recapitulate important aspects of the complex cell–cell and cell–matrix interplay within the tumor-stroma microenvironment KW - adipose-derived stromal cells KW - adipose tissue KW - bioprinting KW - breast cancer model KW - extracellular matrix KW - hyaluronic acid KW - spheroids Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-236496 VL - 10 IS - 4 ER - TY - JOUR A1 - Viera, Jonathan Trujillo A1 - El-Merahbi, Rabih A1 - Nieswandt, Bernhard A1 - Stegner, David A1 - Sumara, Grzegorz T1 - Phospholipases D1 and D2 Suppress Appetite and Protect against Overweight JF - PLoS ONE N2 - Obesity is a major risk factor predisposing to the development of peripheral insulin resistance and type 2 diabetes (T2D). Elevated food intake and/or decreased energy expenditure promotes body weight gain and acquisition of adipose tissue. Number of studies implicated phospholipase D (PLD) enzymes and their product, phosphatidic acid (PA), in regulation of signaling cascades controlling energy intake, energy dissipation and metabolic homeostasis. However, the impact of PLD enzymes on regulation of metabolism has not been directly determined so far. In this study we utilized mice deficient for two major PLD isoforms, PLD1 and PLD2, to assess the impact of these enzymes on regulation of metabolic homeostasis. We showed that mice lacking PLD1 or PLD2 consume more food than corresponding control animals. Moreover, mice deficient for PLD2, but not PLD1, present reduced energy expenditure. In addition, deletion of either of the PLD enzymes resulted in development of elevated body weight and increased adipose tissue content in aged animals. Consistent with the fact that elevated content of adipose tissue predisposes to the development of hyperlipidemia and insulin resistance, characteristic for the pre-diabetic state, we observed that Pld1\(^{-/-}\) and Pld2\(^{-/-}\) mice present elevated free fatty acids (FFA) levels and are insulin as well as glucose intolerant. In conclusion, our data suggest that deficiency of PLD1 or PLD2 activity promotes development of overweight and diabetes. KW - enzyme regulation KW - insulin resistance KW - body weight KW - mouse models KW - bioenergetics KW - insulin KW - hypothalamus KW - adipose tissue Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-179729 VL - 11 IS - 6 ER - TY - JOUR A1 - Vandenberg, Laura N. A1 - Chahoud, Ibrahim A1 - Heindel, Jerrold J. A1 - Padmanabhan, Vasantha A1 - Paumgartten, Francisco J. R. A1 - Schönfelder, Gilbert T1 - Urinary, Circulating, and Tissue Biomonitoring Studies Indicate Widespread Exposure to Bisphenol A T1 - Estudos de biomonitoração do sistema urinário, circulatório e tecidos indicam grande exposição ao Bisfenol A JF - Ciência & Saúde Coletiva N2 - Bisphenol A (BPA) is one of the highest-volume chemicals produced worldwide, and human exposure to BPA is thought to be ubiquitous. Thus, there are concerns that the amount of BPA to which humans are exposed may cause adverse health effects. We examined many possibilities for why biomonitoring and toxicokinetic studies could come to seemingly conflicting conclusions. More than 80 published human biomonitoring studies that measured BPA concentrations in human tissues, urine, blood, and other fluids, along with two toxicokinetic studies of human BPA metabolism were examined. Unconjugated BPA was routinely detected in blood (in the nanograms per milliliter range), and conjugated BPA was routinely detected in the vast majority of urine samples (also in the nanograms per milliliter range). In stark contrast, toxicokinetic studies proposed that humans are not internally exposed to BPA. Available data from biomonitoring studies clearly indicate that the general population is exposed to BPA and is at risk from internal exposure to unconjugated BPA. The two toxicokinetic studies that suggested human BPA exposure is negligible have significant deficiencies, are directly contradicted by hypothesis-driven studies, and are therefore not reliable for risk assessment purposes. N2 - Bisfenol A (BPA) é um dos produtos químicos mais produzido em todo o mundo, e a exposição humana a ele é considerada onipresente. Assim, há preocupações de que a quantidade de BPA para o qual os seres humanos estão expostos podem causar efeitos adversos à saúde. Nós examinamos muitas possibilidades sobre o porquê estudos de biomonitorização e toxicocinética podem chegar a conclusões aparentemente conflitantes. Mais de 80 estudos publicados de biomonitorização humana que mediram a concentração de BPA em tecidos humanos, urina, sangue e outros fluidos, juntamente com dois estudos de toxicocinética do metabolismo humano BPA foram examinados. BPA não conjugado foi detectado no sangue (nonanogramas por mililitro gama), e BPA conjugado foi detectado na grande maioria das amostras de urina. Em contraste, estudos de toxico-cinética propuseram que os seres humanos não são internamente expostos ao BPA. Dados disponíveis de estudos de biomonitorização indicam que a população em geral está exposta ao BPA e em risco de exposição interna ao BPA não conjugado. Os dois estudos de toxicocinética, que sugeriram a exposição humana ao BPA é insignificante, têm deficiências significativas e estão diretamente refutados por outros estudos e, portanto não são confiáveis para fins de avaliação de risco. KW - human KW - performance liquid-chromatography KW - toxicocinética KW - serum KW - fluorescence detection KW - disrupting chemicals KW - endocrine disruptor KW - human exposure KW - PBPK/PBTK model KW - pregnancy KW - risk assessment KW - toxicokinetics KW - solid-phase extraction KW - tandem mass-spectrometry KW - HPLC-MS/MS method KW - environmental phenols KW - estrogen receptor KW - adipose tissue KW - disruptor endócrino KW - exposição humana KW - modelo PBPK/PBTK KW - gravidez KW - avaliação de risco Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134332 VL - 17 IS - 2 ER - TY - THES A1 - Werner, Katharina Julia T1 - Adipose Tissue Engineering - In vitro Development of a subcutaneous fat layer and a vascularized adipose tissue construct utilizing extracellular matrix structures T1 - Fettgewebe Engineering - In vitro Entwicklung einer subkutanen Fettschicht und eines vaskularisierten Fettgewebskonstruktes unter Verwendung extrazellulärer Matrixstrukturen N2 - Each year millions of plastic and reconstructive procedures are performed to regenerate soft tissue defects after, for example, traumata, deep burns or tumor resections. Tissue engineered adipose tissue grafts are a promising alternative to autologous fat transfer or synthetic implants to meet this demand for adipose tissue. Strategies of tissue engineering, especially the use of cell carriers, provide an environment for better cell survival, an easier positioning and supplemented with the appropriate conditions a faster vascularization in vivo. To successfully engineer an adipose tissue substitute for clinical use, it is crucial to know the actual intended application. In some areas, like the upper and lower extremities, only a thin subcutaneous fat layer is needed and in others, large volumes of vascularized fat grafts are more desirable. The use and interplay of stem cells and selected scaffolds were investigated and provide now a basis for the generation of fitted and suitable substitutes in two different application areas. Complex injuries of the upper and lower extremities, in many cases, lead to excessive scarring. Due to severe damage to the subcutaneous fat layer, a common sequela is adhesion formation to mobile structures like tendons, nerves, and blood vessels resulting in restricted motion and disabling pain [Moor 1996, McHugh 1997]. In order to generate a subcutaneous fat layer to cushion scarred tissue after substantial burns or injuries, different collagen matrices were tested for clinical handling and the ability to support adipogenesis. When testing five different collagen matrices, PermacolTM and StratticeTM showed promising characteristics; additionally both possess the clinical approval. Under culture conditions, only PermacolTM, a cross-linked collagen matrix, exhibited an excellent long-term stability. Ranking nearly on the same level was StratticeTM, a non-cross-linked dermal scaffold; it only exhibited a slight shrinkage. All other scaffolds tested were severely compromised in stability under culture conditions. Engineering a subcutaneous fat layer, a construct would be desirable with a thin layer of emerging fat for cushioning on one side, and a non-seeded other side for cell migration and host integration. With PermacolTM and StratticeTM, it was possible to produce constructs with ASC (adipose derived stem cells) seeded on one side, which could be adipogenically differentiated. Additionally, the thickness of the cell layer could be varied. Thereby, it becomes possible to adjust the thickness of the construct to the surrounding tissue. In order to reduce the pre-implantation time ex vivo and the costs, the culture time was varied by testing different induction protocols. An adipogenic induction period of only four days was demonstrated to be sufficient to obtain a substantial adipogenic differentiation of the applied ASC. Thus, seeded with ASC, PermacolTM and StratticeTM are suitable scaffolds to engineer subcutaneous fat layers for reconstruction of the upper and lower extremities, as they support adipogenesis and are appropriately thin, and therefore would not compromise the cosmesis. For the engineering of large-volume adipose tissue, adequate vascularization still represents a major challenge. With the objective to engineer vascularized fat pads, it is important to consider the slow kinetics of revascularization in vivo. Therefore, a decellularized porcine jejunum with pre-existing vascular structures and pedicles to connect to the host vasculature or the circulation of a bioreactor system was used. In a first step, the ability of a small decellularized jejunal section was tested for cell adhesion and for supporting adipogenic differentiation of hASC mono-cultures. Cell adhesion and adipogenic maturation of ASC seeded on the jejunal material was verified through histological and molecular analysis. After the successful mono-culture, the goal was to establish a MVEC (microvascular endothelial cells) and ASC co-culture; suitable culture conditions had to be found, which support the viability of both cell types and do not interfere with the adipogenic differentiation. After the elimination of EGF (epidermal growth factor) from the co-culture medium, substantial adipogenic maturation was observed. In the next step, a large jejunal segment (length 8 cm), with its pre-existing vascular structures and arterial/venous pedicles, was connected to the supply system of a custom-made bioreactor. After successful reseeding the vascular structure with endothelial cells, the lumen was seeded with ASC which were then adipogenically induced. Histological and molecular examinations confirmed adipogenic maturation and the existence of seeded vessels within the engineered construct. Noteworthily, a co-localization of adipogenically differentiating ASC and endothelial cells in vascular networks could be observed. So, for the first time a vascularized fat construct was developed in vitro, based on the use of a decellularized porcine jejunum. As this engineered construct can be connected to a supply system or even to a patient vasculature, it is versatile in use, for example, as transplant in plastic and reconstruction surgery, as model in basic research or as an in vitro drug testing system. To summarize, in this work a promising substitute for subcutaneous fat layer reconstruction, in the upper and lower extremities, was developed, and the first, as far as reported, in vitro generated adipose tissue construct with integrated vascular networks was successfully engineered. N2 - Jedes Jahr werden Millionen von plastischen und wiederherstellenden Eingriffe durchgeführt, um zum Beispiel nach Traumata, hochgradigen Verbrennungen oder Tumorekonstruktionen, die natürliche Erscheinung und Funktion im Bereich von Weichgewebsdefekt wiederherzustellen. Gezüchtete Fettgewebskonstrukte sind eine vielversprechende Alternative zu autologen Fettgewebstransfers oder synthetischen Implantaten, um dem Bedarf an Fettgewebe gerecht zu werden. Die Strategien der Gewebezüchtung, besonders das Verwenden von Zellträgern, schaffen eine Umgebung für besseres Zellüberleben, eine einfachere Positionierung und - versehen mit den entsprechenden Eigenschaften - eine schnellere Vaskularisierung in vivo. Um erfolgreich einen Fettgewebe-Ersatz für die klinische Anwendung herzustellen, ist es notwendig das spätere Anwendungsgebiet zu kennen. In manchen Bereichen, wie in den oberen und unteren Extremitäten, braucht man nur eine dünne Unterhautfettschicht, und in anderen Bereichen wiederum ist ein großes Volumen an vaskularisiertem Fettgewebskonstrukt anzustreben. Die Nutzung und das Zusammenspiel von Stammzellen und ausgewählten Zellträgern wurden untersucht und legen nun eine Basis für die Herstellung von passendem und zweckmäßigem Ersatzgewebe zweier unterschiedlicher Anwendungsgebiete. Komplexe Verletzungen der oberen und unteren Extremitäten führen oftmals zu beträchtlicher Narbenbildung. Eine häufige Folgeerscheinung, hervorgerufen durch eine schwere Beschädigung des Unterhautfettgewebes, ist die Adhäsion zwischen mobilen Strukturen wie Sehnen, Nerven und Blutgefäßen. Dies resultiert dann in eingeschränkter Beweglichkeit und lähmenden Schmerzen [Moor 1996, McHugh 1997]. Um eine subkutane Fettschicht herzustellen, die das vernarbte Gewebe nach schwerer Verbrennung oder Verletzung polstert, wurden verschiedene Kollagenmaterialien auf die klinische Handhabung und die Unterstützung der Adipogenese untersucht. In der Untersuchung von fünf verschiedenen Kollagenmatrices zeigten PermacolTM und StratticeTM vielversprechende Eigenschaften. Beide besitzen außerdem die klinische Zulassung. PermacolTM, eine chemisch quervernetzte Kollagenmatrix, zeigte unter Kulturbedingungen hervorragende Langzeitstabilität. Fast ebenso gute Eigenschaften konnten bei StratticeTM, einem nicht vernetzten dermalen Gerüstmaterial, beobachtet werden; es zeigte lediglich leichte Schrumpfung. Alle sonst getesteten Kollagenmaterialien waren unter Kulturbedingungen stark in ihrer Stabilität beeinträchtigt. Zur Herstellung einer subkutanen Fettschicht wäre ein Konstrukt wünschenswert mit einer dünnen, gerade entstehenden Fettschicht für die Polsterung auf der einen Seite und einer nicht besiedelten anderen Seite für die Zelleinwanderung und die Integration in das umliegende Gewebe. Mit PermacolTM und StratticeTM war es möglich Konstrukte herzustellen, welche auf einer Seite mit ASC (aus dem Fettgewebe isolierte Stammzellen) besiedelt und anschließend adipogen differenziert werden konnten. Zusätzlich konnte die Dicke der Zellschicht hierbei variiert werden. Somit ist es möglich die Dicke des Konstruktes an das umliegende Gewebe anzupassen. Um die Preimplantationszeit ex vivo zu verkürzen und damit auch die Kosten zu senken, wurde die Kulturzeit variiert, indem verschiedene Induktionsprotokolle getestet wurden. Eine adipogene Induktionsperiode von nur vier Tagen erwies sich als ausreichend, um eine substantielle adipogene Differenzierung der eingesetzten ASC zu erreichen. Das heißt, die mit ASC besiedelten PermacolTM und StratticeTM Matrices sind zweckdienliche Zellträgermaterialien, um eine subkutane Fettschicht für die oberen und unteren Extremitäten herzustellen, da sie die Adipogenese unterstützen und durch die nur geringe und anpassbare Dicke die Kosmesis nicht beeinträchtigen. Für die Entwicklung von großvolumigem Fettgewebe stellt die adäquate Vaskularisierung noch immer eine große Herausforderung dar. Mit dem Ziel ein vaskularisiertes Fettkonstrukt herzustellen, ist es wichtig die langsame Kinetik der Revaskularisierung in vivo zu berücksichtigen. Daher wurde hier ein dezellularisiertes Schweinedarmsegment mit schon vorhandenen Gefäßstrukturen und Gefäßanschlüssen für die Verbindung zum Kreislaufsystem des Patienten oder eines Bioreaktor-Systems verwendet. Im ersten Schritt wurden auf einem kleinen dezellularisierten Schweinedarm-Stück die Zelladhäsion und die adipogene Differenzierung der ASC in Monokultur getestet. Die Zelladhäsion und die adipogene Reifung konnte mittels histologischer und molekularer Analysen auf dem jejunalen Material nachgewiesen werden. Nach der erfolgreichen Monokultur musste die Co-Kultur von MVEC (micro vaskuläre Endothelzellen) und ASC etabliert werden. Um dieses Ziel zu erreichen, wurden geeignete Kulturbedingungen gesucht, die die Lebensfähigkeit beider Zelltypen unterstützen und gleichzeitig die adipogene Differenzierung nicht beeinträchtigen. Nach dem Ausschluss von EGF (epidermaler Wachstumsfaktor) aus dem Co-Kulturmedium wurde eine substantielle adipogene Reifung der ASC beobachtet. Im nächsten Schritt wurde ein großes dezellularisiertes jejunales Darmsegment (Länge 8 cm) mit der schon existenten Gefäßstruktur und dem arteriellen und venösen Gefäßstiel an den spezialangefertigten Bioreaktor angeschlossen. Nach der erfolgreichen Wiederbesiedelung der Gefäßstrukturen mit Endothelzellen wurde das Darmlumen mit ASC besiedelt, welche anschließend adipogen induziert wurden. Histologische und molekulare Untersuchungen konnten die adipogenen Reifung und die Existenz von besiedelten Gefäßen im hergestellten Konstrukt bestätigen. Besonders erwähnenswert ist die Beobachtung der Co-Lokalisierung von adipogen differenzierenden ASC und Endothelzellen in vasculären Netzwerken. Somit wurde zum ersten Mal - basierend auf einem dezellularisierten Schweinedarm - ein vaskularisiertes Fettgewebskonstrukt in vitro hergestellt. Da dieses Konstrukt an das Versorgungssystem angeschlossen oder mit dem Blutkreislauf des Patienten verbunden werden kann, ist es vielfältig einsetzbar, zum Beispiel in der plastisch-rekonstruktiven Chirurgie, als Modell in der Grundlagenforschung oder als ein in vitro Medikamenten-Testsystem. Zusammengefasst, wurde in der vorgelegten Arbeit ein vielversprechendes Ersatzmaterial für die Rekonstruktion des Unterhautfettgewebes für die unteren und oberen Extremitäten entwickelt, und zum ersten Mal erfolgreich, so weit in der Literatur bekannt, ein Fettgewebskonstrukt mit integriertem vaskularisiertem Netzwerk in vitro generiert. KW - Tissue Engineering KW - Fettgewebe KW - Extrazelluläre Matrix KW - Vascularisation KW - adipose tissue engineering KW - subcutaneous fat layer KW - scar revision surgery KW - vascularized fat construct KW - Bioreactor System KW - extracellular matrix KW - adipose tissue Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-104676 ER -