TY - JOUR A1 - Schnitzlein, Matthias A1 - Zhu, Chongwei A1 - Shoyama, Kazutaka A1 - Würthner, Frank T1 - π‐Extended Pleiadienes by [5+2] Annulation of 1‐Boraphenalenes and ortho‐Dihaloarenes JF - Chemistry – A European Journal N2 - Palladium‐catalyzed [5+2] annulation of 1‐boraphenalenes with ortho‐dihaloarenes afforded negatively curved π‐extended pleiadienes. Two benzo[1,2‐i:4,5‐i’]dipleiadienes (BDPs) featuring a seven‐six‐seven‐membered ring arrangement were synthesized and investigated. Their crystal structure revealed a unique packing arrangement and theoretical calculations were employed to shed light onto the dynamic behavior of the BDP moiety and its aromaticity. Further, a naphthalene‐fused pleiadiene was stitched together by oxidative cyclodehydrogenation to yield an additional five‐membered ring. This formal azulene moiety led to distinct changes in optical and redox properties and increased perturbation of the aromatic system. KW - annulation KW - aromaticity KW - azulene KW - cyclodehydrogenation KW - polycyclic aromatic hydrocarbons Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-293919 VL - 28 IS - 61 ER - TY - JOUR A1 - Leininger, H. A1 - Lanzendörfer, F. A1 - Christl, Manfred T1 - Über die Reduktion des Benzvalenozonids zum cis-1,3-Cyclobutandimethanol mit LiAlH\(_4\) N2 - No abstract available KW - Organische Chemie Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58130 ER - TY - JOUR A1 - Zhang, Fangyuan A1 - Radacki, Krzysztof A1 - Braunschweig, Holger A1 - Lambert, Christoph A1 - Ravat, Prince T1 - Zinc-[7]helicenocyanine and its discrete π-stacked homochiral Dimer JF - Angewandte Chemie International Edition N2 - In this communication, we demonstrate a novel approach to prepare a discrete dimer of chiral phthalocyanine (Pc) by exploiting the flexible molecular geometry of helicenes, which enables structural interlocking and strong aggregation tendency of Pcs. Synthesized [7]helicene-Pc hybrid molecular structure, zinc-[7]helicenocyanine (Zn-7HPc), exclusively forms a stable dimeric pair consisting of two homochiral molecules. The dimerization constants were estimated to be as high as 8.96×10\(^6\) M\(^{−1}\) and 3.42×107 M\(^{−1}\) in THF and DMSO, respectively, indicating remarkable stability of dimer. In addition, Zn\(^{-7}\)HPc exhibited chiral self-sorting behavior, which resulted in preferential formation of a homochiral dimer also in the racemic sample. Two phthalocyanine subunits in the dimeric form strongly communicate with each other as revealed by a large comproportionation constant and observation of an IV-CT band for the thermodynamically stable mixed-valence state. KW - organic chemistry KW - supramolecular assembly KW - chirality KW - helicenes KW - homochiral dimer KW - phthalocyanines Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256534 VL - 60 ER - TY - JOUR A1 - Scheidel, Sebastian A1 - Östreicher, Laurina A1 - Mark, Isabelle A1 - Pöppler, Ann-Christin T1 - You cannot fight the pressure: Structural rearrangements of active pharmaceutical ingredients under magic angle spinning JF - Magnetic Resonance in Chemistry N2 - Although solid-state nuclear magnetic resonance (NMR) is a versatile analytical tool to study polymorphs and phase transitions of pharmaceutical molecules and products, this work summarizes examples of spontaneous and unexpected (and unwanted) structural rearrangements and phase transitions (amorphous-to-crystalline and crystalline-to-crystalline) under magic angle spinning (MAS) conditions, some of them clearly being due to the pressure experienced by the samples. It is widely known that such changes can often be detected by X-ray powder diffraction (XRPD); here, the capability of solid-state NMR experiments with a special focus on \(^{1}\)H-\(^{13}\)C frequency-switched Lee–Goldburg heteronuclear correlation (FSLG HETCOR)/MAS NMR experiments to detect even subtle changes on a molecular level not observable by conventional 1D NMR experiments or XRPD is presented. Furthermore, it is shown that a polymorphic impurity combined with MAS can induce a crystalline-to-crystalline phase transition. This showcases that solid-state NMR is not always noninvasive and such changes upon MAS should be considered in particular when compounds are studied over longer time spans. KW - \(^{1}\)H-\(^{13}\)C HETCOR KW - API KW - structural changes KW - XRPD KW - solid-state NMR KW - MAS Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318838 VL - 60 IS - 6 SP - 572 EP - 582 ER - TY - THES A1 - Spenst, Peter T1 - Xylylene Bridged Perylene Bisimide Cyclophanes and Macrocycles T1 - Xylol verbrückte Perylenbisimid Cyclophane und Makrozyklen N2 - This work is concerned with the syntheses and photophysical properties of para-xylylene bridged macrocycles nPBI with ring sizes from two to nine PBI units, as well as the complexation of polycyclic aromatic guest compounds. With a reduced but substantial fluorescence quantum yield of 21% (in CHCl3) the free host 2PBI(4-tBu)4 can be used as a dual fluorescence probe. Upon encapsulation of rather electron-poor guests the fluorescence quenching interactions between the chromophores are prevented, leading to a significant fluorescence enhancement to > 90% (“turn-on”). On the other hand, the addition of electron-rich guest molecules induces an electron transfer from the guest to the electron-poor PBI chromophores and thus quenches the fluorescence entirely (“turn-off”). The photophysical properties of the host-guest complexes were studied by transient absorption spectroscopy. These measurements revealed that the charge transfer between guest and 2PBI(4-tBu)4 occurs in the “normal region” of the Marcus-parabola with the fastest charge separation rate for perylene. In contrast, the charge recombination back to the PBI ground state lies far in the “inverted region” of the Marcus-parabola. Beside complexation of planar aromatic hydrocarbons into the cavity of the cyclophanes an encapsulation of fullerene into the cyclic trimer 3PBI(4-tBu)4 was observed. 3PBI(4-tBu)4 provides a tube-like structure in which the PBI subunits represent the walls of those tubes. The cavity has the optimal size for hosting fullerenes, with C70 fitting better than C60 and a binding constant that is higher by a factor of 10. TA spectroscopy in toluene that was performed on the C60@3PBI(4-tBu)4 complex revealed two energy transfer processes. The first one comes from the excited PBI to the fullerene, which subsequently populates the triplet state. From the fullerene triplet state a second energy transfer occurs back to the PBI to generate the PBI triplet state. In all cycles that were studied by TA spectroscopy, symmetry-breaking charge separation (SB-CS) was observed in dichloromethane. This process is fastest within the PBI cyclophane 2PBI(4-tBu)4 and slows down for larger cycles, suggesting that the charge separation takes place through space and not through bonds. The charges then recombine to the PBI triplet state via a radical pair intersystem crossing (RP-ISC) mechanism, which could be used to generate singlet oxygen in yields of ~20%. By changing the solvent to toluene an intramolecular folding of the even-numbered larger cycles was observed that quenches the fluorescence and increases the 0-1 transition band in the absorption spectra. Force field calculations of 4PBI(4-tBu)4 suggested a folding into pairs of dimers, which explains the remarkable odd-even effect with respect to the number of connected PBI chromophores and the resulting alternation in the absorption and fluorescence properties. Thus, the even-numbered macrocycles can fold in a way that all chromophores are in a paired arrangement, while the odd-numbered cycles have open conformations (3PBI(4-tBu)4, 5PBI(4-tBu)4, 7PBI(4-tBu)4) or at least additional unpaired PBI unit (9PBI(4-tBu)4). With these experiments we could for the first time give insights in the interactions between cyclic PBI hosts and aromatic guest molecules. Associated with the encapsulation of guest molecules a variety of possible applications can be envisioned, like fluorescence sensing, chiral recognition and photodynamic therapy by singlet oxygen generation. Particularly, these macrocycles provide photophysical relaxation pathways of PBIs, like charge separation and recombination and triplet state formation that are hardly feasible in monomeric PBI dyes. Furthermore, diverse compound specific features were found, like the odd-even effect in the folding process or the transition of superficial nanostructures of the tetrameric cycle influenced by the AFM tip. The comprehensive properties of these macrocycles provide the basis for further oncoming studies and can serve as an inspiration for the synthesis of new macrocyclic compounds. N2 - In dieser Arbeit wurde die Synthese para-Xylol-verbrückter Makrozyklen nPBI mit Ringgrößen von zwei bis neun PBI Einheiten beschrieben und deren photophysikalische Eigenschaften sowie Komplexierungsvermögen für polyzyklische aromatische Gastverbindungen analysiert. Mit einer reduzierten, aber noch substantiellen Fluoreszenzquantenausbeute von 21% in CHCl3 eignet sich der freie Wirt 2PBI(4-tBu)4 als dualer Fluoreszenzsensor. Durch die Aufnahme von elektronenarmen Gästen wird die zur Fluoreszenzlöschung führende Wechselwirkung zwischen den Chromophoren unterbunden, was sich in einer deutlichen Steigerung der Fluoreszenzquantenausbeute auf > 90% widerspiegelt („turn-on”). Andererseits führt die Zugabe elektronenreicher Gäste zu einem Elektronentransfer vom Gast auf die elektronenarmen PBI-Chromophore und quencht die Fluoreszenz damit nahezu vollständig („turn-off”). Die photophysikalischen Eigenschaften der Wirt-Gast Komplexe wurden mittels transienter Absorptionsspektroskopie weitergehend untersucht. Diese Studien zeigten, dass die Ladungstrennung zwischen Gast und 2PBI(4-tBu)4 in der „normalen Region“ der Marcus-Parabel stattfindet mit der schnellsten Ladungstrennungsrate für Perylen. Im Gegensatz dazu liegt die Ladungsrekombination zurück zum PBI Grundzustand weit in der „invertierten Region“ der Marcus-Parabel. Neben der Komplexierung flacher aromatischer Kohlenwasserstoffe in die Kavitäten der Cyclophane konnte auch die Aufnahme von Fullerenen in das zyklische Trimer 3PBI(4 tBu)4 beobachtet werden. 3PBI(4-tBu)4 weist eine röhrenartige Struktur auf, in der die PBI-Untereinheiten die Wände der Röhren darstellen. Damit hat die Kavität die optimale Größe für die Aufnahme von Fullerenen, wobei C70 besser hinein passt als C60 und damit eine um den Faktor 10 höhere Bindungskonstante besitzt. Transiente Absorptions-spektroskopie des C60@3PBI(4-tBu)4 Komplexes zeigte in Toluol zwei Energietransfer-prozesse auf. Der erste erfolgt vom angeregten PBI zum Fulleren, welches daraufhin den Triplettzustand populiert. Vom Fulleren-Triplettzustand erfolgt ein zweiter Energie-transfer zurück zum PBI, was schließlich im PBI-Triplett Zustand mündet. Für alle mittels transienter Absorptionsspektroskopie untersuchten Zyklen konnte eine symmetriebrechende Ladungstrennung in Dichlormethan beobachtet werden. Dieser Prozess ist für das PBI Cyclophan 2PBI(4-tBu)4 am schnellsten und wird mit zunehmender Ringgröße langsamer. Demnach ist die Ladungstrennung abhängig von der räumlichen Nähe der PBI Chromophore und nicht von deren Verbrückung. Im Anschluss erfolgt eine Ladungsrekombination zum PBI-Triplettzustand über ein Radikalpaar (radical pair intersystem crossing RP-ISC-Mechanismus), was zur Gewinnung von Singulettsauerstoff in Ausbeuten von ~20% genutzt werden konnte. Bei Verwendung von Toluol als Lösungsmittel wurde eine intramolekulare Faltung der geradzahligen größeren Zyklen beobachtet, wodurch die Fluoreszenz gequencht und die 0-1 Übergangsbande der Absorption verstärkt wird. Kraftfeldberechnungen für 4PBI(4 tBu)4 legen eine Faltung zu Dimerpaaren nahe, welche den außergewöhnlichen gerade-ungerade Effekt bezogen auf die Anzahl der verknüpften PBI Chromophore und die daraus resultierende Alternanz in den Absorptions- und Fluoreszenzeigenschaften erklärt. Dementsprechend können die geradzahligen Makrozyklen in der Art falten, dass alle Chromophore in einer gepaarten Anordnung vorliegen, während die ungeradzahligen Zyklen offene Konformationen (3PBI(4 tBu)4, 5PBI(4 tBu)4, 7PBI(4 tBu)4) oder zumindest teilweise ungepaarte PBI-Einheiten (9PBI(4 tBu)4) aufweisen. Mit zunehmender Ringgröße erhöht sich der Anteil an gefalteten Untereinheiten, was dazu führt, dass sich die optischen Eigenschaften des ungeradzahligen 9PBI(4 tBu)4 Zyklus den vollständig gefalteten Systemen angleicht. Mit diesen Experimenten konnten wir erstmals Enblicke in die Wechselwirkungen zwischen zyklischen PBI-Wirten und aromatischen Gastmolekülen geben. Verbunden mit der Aufnahme von Gastmolekülen ist eine Reihe möglicher Anwendungen wie Fluoreszenzsensorik, Chiralitätserkennung und photodynamische Therapie über die Generierung von Singulettsauerstoff denkbar. Insbesondere ermöglichen diese Makrozyklen photophysikalische Relaxationspfade von PBIs wie die Ladungstrennung und –rekombination und die Ausbildung von Triplettzuständen, welche in monomeren PBI-Frabstoffen nur schwer realisierbar sind. Weiterhin konnten einige verbindungs-spezifische Eigenschaften gefunden werden, wie den gerade-ungerade Effekt im Faltungsprozess oder die für den tetrameren Zyklus gefundene Umwandlung von Oberflächennanostrukturen unter dem Einfluß der AFM-Spitze. Die reichhaltigen Eigenschaften dieser Makrozyklen bilden damit die Basis für weitergehende Untersuchungen und können als Inspiration für die Synthese neuer makrozyklischer Verbindungen dienen. KW - Supramolekulare Chemie KW - Wirt-Gast-Beziehung KW - Perylenbisimid KW - Energietransfer KW - Elektronentransfer KW - Perylene Bisimide KW - Energy Transfer KW - Electron Transfer KW - Elektronentransfer KW - Perylenderivate KW - Wirt-Gast-Komplex-Chemie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-139015 ER - TY - THES A1 - Schindler, Dorothee T1 - Water Oxidation with Multinuclear Ruthenium Catalysts T1 - Wasseroxidation mit mehrkernigen Ruthenium-Katalysatoren N2 - In terms of the need of environmentally benign renewable and storable energy sources, splitting of water into hydrogen and oxygen by using sunlight is a promising approach. Hereby, water oxidation catalysts (WOCs) are required to perform the water oxidation comprising the transfer of four electrons to provide the reducing equivalents for producing hydrogen. The class of Ru(bda) (bda = 2,2'-bipyridine-6,6'-dicarboxylate) catalysts has proven to be efficient for this reaction. In this thesis, ligand exchange processes in Ru(bda) complexes have been analyzed and the formation of multinuclear macrocyclic WOCs was studied. Based on the knowledge acquired by these studies, new multinuclear cyclic Ru(bda) complexes have been synthesized and their catalytic efficiencies in homogeneous water oxidation have been investigated. Going one step further for setting up functional devices, molecular WOCs have been immobilized on conducting or semiconducting supporting materials. Direct anchoring on carbon nanotubes generated a promising materials for further applications. N2 - Der Klimawandel als die gesellschaftliche Herausforderung des 21. Jahrhunderts ist der Allgemeinheit in den letzten Jahren insbesondere durch Aktivitäten der jüngeren Generation mehr und mehr ins Bewusstsein gerückt. Mit ihrem Engagement in Klimabewegungen machen sie auf die Dringlichkeit aufmerksam, fossile Brennstoffe als Hauptverursacher schädlicher Emissionen zu ersetzen. Angesichts des Bedarfs an umweltfreundlichen erneuerbaren und zugleich speicherbaren Energie¬quellen ist die Erzeugung von Wasserstoff unter Verwendung von Sonnenlicht zur Spaltung von Wasser in seine Bestandteile ein vielversprechender Ansatz (Kapitel 2.1). Die Wasser¬oxidationsreaktion, die die erforderlichen Reduktionsäquivalenten für die Umwandlung von Protonen in molekularen Wasserstoff liefert, umfasst jedoch einen herausfordernden Vier-Elektronen-Transferprozess, der robuste und effiziente Katalysatoren unverzichtbar macht (Kapitel 2.2). In den letzten Jahrzehnten durchgeführte ausführliche Untersuchungen an molekularen Wasser¬oxidations¬katalysatoren (WOCs, engl: water oxidation catalysts) haben gezeigt, dass Katalysatoren, die das katalytisch aktive Ru(bda) Fragment (bda: 2,2'-bipyridin-6,6'-dicarbonsäure) enthalten, eine hohe Effizienz in der Wasseroxidation aufweisen.[41] Basierend auf diesen Erkenntnissen entwickelten Würthner und Mitarbeiter einen supra-molekularen Ansatz, bei dem drei Ru(bda) Einheiten makrozyklisch organisiert werden.[42] Diese makrozyklischen Ru(bda) Komplexe zeigten außerordentlich hohe katalytische Aktivitäten mit bedeutend höherer Umsatzfrequenz (TOF, engl: turnover frequency) und Umsatzzahl (TON, engl: turnover number) sowie einer verbesserten Stabilität des Katalysators im Vergleich zur einkernigen Referenzverbindung Ru(bda)(pic)2.[40] Interessanter¬weise wurde heraus¬gefunden, dass vermutlich ein wasserstoffverbrücktes Wasser¬netzwerk in der Kavität des Makrozyklus für schnelle Protonen-gekoppelte Elektronen-Transfer-Schritte (PCET, engl: protonen-coupled electron transfer) und somit beschleunigte Reaktionsgeschwindigkeiten verantwortlich ist. Darüber hinaus belegten mechanistische Untersuchungen einen Wechsel des katalytischen Weges von einem bimolekularen I2M (Interaktion von zwei M-O Einheiten, engl: interaction of two M-O units) Mechanismus im einkernigen Ru(bda)pic2 Referenzkomplex zu einem mononuklearen WNA (nukleophiler Wasserangriff, engl: water nucleophiilic attack) Mechanismus im dreikernigen makro-zyklischen WOC MC3 (Kapitel 2.3), was letzteren besonders interessant für anwendungs-bezogene Untersuchungen macht. ... KW - Rutheniumkomplexe KW - catalysis KW - Wasser KW - Katalyse KW - Oxidation KW - metallosupramolecular chemistry KW - ruthenium complexes KW - water oxidation KW - Ruthenium Komplexe KW - Metallosupramolekulare Chemie KW - Wasseroxidation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-233093 ER - TY - JOUR A1 - Schlosser, Julika A1 - Cibulka, Radek A1 - Groß, Philipp A1 - Ihmels, Heiko A1 - Mohrschladt, Christian J. T1 - Visible‐Light‐Induced Di‐\(\pi\)‐Methane Rearrangement of Dibenzobarrelene Derivatives JF - ChemPhotoChem N2 - It is demonstrated that the di‐\(\pi\)‐methane (DPM) rearrangement of carbonyl‐substituted dibenzobarrelene (9,10‐dihydro‐9,10‐ethenoanthracene) derivatives is induced by visible‐light‐induced triplet photosensitization with Ir(ppy)\(_{3}\), Ir(dFppy)\(_{3}\) or 1‐butyl‐7,8‐dimethoxy‐3‐methylalloxazine as catalysts, whereas derivatives that lack carbonyl substituents are photoinert under these conditions. Notably, the products are formed almost quantitatively. KW - dibenzosemibullvalenes KW - di-\(\pi\)-methane rearrangement KW - ethenoanthracenes KW - photocatalysis KW - photosensitization Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212633 VL - 4 IS - 2 SP - 132 EP - 137 ER - TY - JOUR A1 - Christl, Manfred A1 - Herbert, R. T1 - Unusual Carbon Shielding Effects of Cyclopropanes and Double Bonds in Strained Bicyclo[3.1.0]hexanes and Cyclopentenes N2 - Carbon-13 shieldings and one-bond \(^{13}\)C-H coupling constants of bicydo[2.1.1]hexane, bicydo[2.l.l]hex- 2-ene, tricydo[3.1.1.0\(^{2.4}\)]heptane and benzvalene are presented and compared. to the data of related. compounds. H a bicydo[3.1.0]hexane system is part of a rigid skeleton, the cydopropane ring exerts spedfk: 'Y substituent eflects of two ldnds. In the case of the bicyclobexane boat form an upfield shift of the C-3 signal is observed and in tbe esse of the chair form a downfield shift of 15-20 ppm. Compared to the corresponding cydopentanes the double bond in strained cydopentenes causes downfield shifts of the C-4 absorption. 1bis eftect increases witb increasing strain, reaching 8 45.9 ppm maximum in benzvalene. Hence it is tbe only known bicydo[l.l.O]butane baving 8 reversed order of carbon shieldings. The downfield shifts are e:xplained by means of simple orbital interaction schemes. KW - Organische Chemie Y1 - 1979 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58038 ER - TY - JOUR A1 - Lübtow, Michael M. A1 - Marciniak, Henning A1 - Schmiedel, Alexander A1 - Roos, Markus A1 - Lambert, Christoph A1 - Luxenhofer, Robert T1 - Ultra-high to ultra-low drug loaded micelles: Probing host-guest interactions by fluorescence spectroscopy JF - Chemistry - A European Journal N2 - Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug‐loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra‐high curcumin loading exceeding 50 wt.%, while the other allows a drug loading of only 25 wt.%. In the low capacity micelles, steady‐state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time‐resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high‐capacity micelles, preventing an observable emission in steady‐state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles. KW - curcumin KW - drug delivery KW - fluorenscence KW - poly(2-oxazine) KW - pol(2-oxazoline) KW - Polymer-drug interaction KW - upconversion Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206128 VL - 25 IS - 54 ER - TY - THES A1 - Mahlmeister, Bernhard T1 - Twisted Rylene Bisimides for Organic Solar Cells and Strong Chiroptical Response in the Near Infrared T1 - Kernverdrillte Rylenbisimide für organische Solarzellen und starke chirooptische Eigenschaften im Nahinfrarot N2 - The chirality of the interlocked bay-arylated perylene motif is investigated upon its material prospect and the enhancement of its chiroptical response to the NIR spectral region. A considerable molecular library of inherently chiral perylene bisimides (PBIs) was utilized as acceptors in organic solar cells to provide decent device performances and insights into the structure-property relationship of PBI materials within a polymer blend. For the first time in the family of core-twisted PBIs, the effects of enantiopurity on the device performance was thoroughly investigated. The extraordinary structural sensitivity of CD spectroscopy served as crucial analytical tool to bridge the highly challenging gap between molecular properties and device analytics by proving the excitonic chirality of a helical PBI dimer. The chirality of this perylene motif could be further enhanced on a molecular level by both the expansion and the enhanced twisting of the π-scaffold to achieve a desirable strong chiroptical NIR response introducing a new family of twisted QBI-based nanoribbons. These achievements could be substantially further developed by expanding this molecular concept to a supramolecular level. The geometrically demanding supramolecular arrangement necessary for the efficient excitonic coupling was carefully encoded into the molecular design. Accordingly, the QBIs could form the first J-type aggregate constituting a fourfold-stranded superhelix of a rylene bisimide with strong excitonic chirality. Therefore, this thesis has highlighted the mutual corroboration of experimental and theoretical data from the molecular to the supramolecular level. It has demonstrated that for rylene bisimide dyes, the excitonic contribution to the overall chiroptical response can be designed and rationalized. This can help to pave the way for new organic functional materials to be used for chiral sensing or chiral organic light-emitting devices. N2 - Die Chiralität des verzahnten Bucht-arylierten Perylenmotivs wurde im Hinblick auf seine Materialanwendung sowie die Verstärkung seiner chiroptischen Eigenschaften im NIR-Spektralbereich untersucht. Eine umfangreiche Molekülbibliothek von inhärent chiralen PBIs wurde als NFAs in OSCs verwendet, um sowohl gute Solarzelleneffizienzen sowie Einblicke in die Struktur-Eigenschafts-Beziehung von PBI Materialien innerhalb einer Polymermischung zu erhalten. Zum ersten Mal wurden für kernverdrillte PBIs die Auswirkungen der Enantiomerenreinheit auf die Effizienz von organischen Dünnfilmbauteilen untersucht. Die außerordentliche strukturelle Empfindlichkeit der CD Spektroskopie diente als entscheidendes Analysewerkzeug, um die hoch anspruchsvolle Lücke zwischen der Analytik molekularer Eigenschaften und der Bauteilanalytik zu schließen, indem die exzitonische Chiralität eines helikalen PBI-Dimers nachgewiesen wurde. Die Chiralität dieses Perylenmotivs konnte auf molekularer Ebene weiter verstärkt werden, indem das π-Gerüst sowohl erweitert als auch stärker verdrillt wurde, um wünschenswert starke chiroptische Eigenschaften im NIR-Bereich zu erzielen und so eine neue Molekülfamilie kernverdrillter QBIs zu definieren. Diese Errungenschaften konnten durch die Ausweitung dieses molekularen Konzepts auf eine supramolekulare Ebene noch erheblich weiterentwickelt werden. Die geometrisch anspruchsvolle supramolekulare Anordnung, die für die effiziente exzitonische Kopplung erforderlich ist, wurde sorgfältig in das molekulare Design kodiert. Dementsprechend stellt das präsentierte QBI in seiner vierfach versetzt gestapelten Superhelix das erste Rylenbisimid-J-Aggregat dar, welches eine starke exzitonische Chiralität zeigt. Somit hat die Arbeit hat die gegenseitige Bestätigung von experimentellen und theoretischen Daten von der molekularen bis hin zur supramolekularen Ebene herausgestellt und gezeigt, dass für Rylenbisimid-Farbstoffe der exzitonische Beitrag zu den chiroptischen Eigenschaften konzipiert, synthetisch realisiert und quantenmechanisch verstanden werden kann. Dies kann den Weg für neue organische Funktionsmaterialien ebnen, die für chirale Sensoren oder Licht emittierende Bauteile verwendet werden können. KW - Molekül KW - Chiralität KW - Exziton KW - Organische Solarzelle KW - Supramolekulare Chemie KW - organic solar cell KW - non-fullerene acceptor KW - perylene bisimide KW - quaterrylene bisimide KW - inherent chirality KW - excitonic chirality KW - supramolecular chemistry KW - self-assembly KW - near infrared chirality Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-346106 ER - TY - JOUR A1 - Dietzsch, Julia A1 - Bialas, David A1 - Bandorf, Johannes A1 - Würthner, Frank A1 - Höbartner, Claudia T1 - Tuning Exciton Coupling of Merocyanine Nucleoside Dimers by RNA, DNA and GNA Double Helix Conformations JF - Angewandte Chemie International Edition N2 - Exciton coupling between two or more chromophores in a specific environment is a key mechanism associated with color tuning and modulation of absorption energies. This concept is well exemplified by natural photosynthetic proteins, and can also be achieved in synthetic nucleic acid nanostructures. Here we report the coupling of barbituric acid merocyanine (BAM) nucleoside analogues and show that exciton coupling can be tuned by the double helix conformation. BAM is a nucleobase mimic that was incorporated in the phosphodiester backbone of RNA, DNA and GNA oligonucleotides. Duplexes with different backbone constitutions and geometries afforded different mutual dye arrangements, leading to distinct optical signatures due to competing modes of chromophore organization via electrostatic, dipolar, - stacking and hydrogen-bonding interactions. The realized supramolecular motifs include hydrogenbonded BAM–adenine base pairs and antiparallel as well as rotationally stacked BAM dimer aggregates with distinct absorption, CD and fluorescence properties. KW - Chromophore Assembly KW - Merocyanine KW - Nucleobase Analogue KW - Supramolecular Element KW - Nucleic Acids Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-254565 ER - TY - JOUR A1 - Christl, Manfred A1 - Lang, R. T1 - Tricyclo[5.1.0.0\(^{2,8}\)]octa-3,5-diene (Octavalene) N2 - No abstract available KW - Organische Chemie Y1 - 1982 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58124 ER - TY - JOUR A1 - Christl, Manfred A1 - Kraft, A. T1 - Tricyclo[3.1.1.0\(^{2,6}\)]hexandion (the Valen of o-Benzochinons), Bicyclo[2.1.1]hexan-2,3-dion and Valene of a Chinoxalins, of Phenazins and of a Benzophenazine N2 - No abstract available KW - Organische Chemie Y1 - 1988 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58462 ER - TY - JOUR A1 - Hollmann, Claudia A1 - Wiese, Teresa A1 - Dennstädt, Fabio A1 - Fink, Julian A1 - Schneider-Schaulies, Jürgen A1 - Beyersdorf, Niklas T1 - Translational approaches targeting ceramide generation from sphingomyelin in T cells to modulate immunity in humans JF - Frontiers in Immunology N2 - In T cells, as in all other cells of the body, sphingolipids form important structural components of membranes. Due to metabolic modifications, sphingolipids additionally play an active part in the signaling of cell surface receptors of T cells like the T cell receptor or the co-stimulatory molecule CD28. Moreover, the sphingolipid composition of their membranes crucially affects the integrity and function of subcellular compartments such as the lysosome. Previously, studying sphingolipid metabolism has been severely hampered by the limited number of analytical methods/model systems available. Besides well-established high resolution mass spectrometry new tools are now available like novel minimally modified sphingolipid subspecies for click chemistry as well as recently generated mouse mutants with deficiencies/overexpression of sphingolipid-modifying enzymes. Making use of these tools we and others discovered that the sphingolipid sphingomyelin is metabolized to ceramide to different degrees in distinct T cell subpopulations of mice and humans. This knowledge has already been translated into novel immunomodulatory approaches in mice and will in the future hopefully also be applicable to humans. In this paper we are, thus, summarizing the most recent findings on the impact of sphingolipid metabolism on T cell activation, differentiation, and effector functions. Moreover, we are discussing the therapeutic concepts arising from these insights and drugs or drug candidates which are already in clinical use or could be developed for clinical use in patients with diseases as distant as major depression and chronic viral infection. KW - sphingolipids KW - CD4+ T cells KW - regulatory T cells (Treg) KW - CD8+ T cells KW - anti-depressant drug Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-198806 SN - 1664-3224 VL - 10 IS - 2363 ER - TY - THES A1 - Bauer, Christian T1 - Towards ecological and efficient electrochemical energy storage in supercapacitors and sodium ion batteries using onion-like carbon T1 - Ökologische und effiziente elektrochemische Energiespeicherung in Superkondensatoren und Natriumionen-Batterien mit Kohlenstoff-Nanozwiebeln N2 - In this thesis, the usage of onion-like carbon (OLC) for energy storage applications was researched regarding sustainability, performance and processability. This work targets to increase the scientific understanding regarding the role of OLC in electrodes and to facilitate a large-scale production, which is the foundation for commercial application. Research was devoted to increase the knowledge in the particular field, to yield synergistic approaches and a shared value regarding sustainability and performance. N2 - Im Rahmen dieser Arbeit wurde die Verwendung von Onion-like Carbon (OLC) als Aktivmaterial zur Energiespeicherung untersucht. Die Arbeit zielte darauf ab, das wissenschaftliche Verständnis der Rolle von OLC im Kontext der elektrochemischen Energiespeicherung zu verbessern. Hierfür wurde an den Prozessschritten und Verfahren gearbeitet, um OLC-basierte Elektroden erfolgreich in Superkondensatoren und Pseudokondensatoren zu verwenden. Auch der Einsatz von OLC als Aktivmaterial für Natriumionenbatterien wurde erforscht, wobei sich das Material in dieser Anwendung als Aktivmaterial ungeeignet erwies. Die Bearbeitungen dieser Fragestellungen war darauf ausgerichtet, das Wissen in diesem Bereich zu erweitern, synergetische Ansätze für Problemlösungen zu finden und einen Mehrwert in Bezug auf Nachhaltigkeit, Performance und Prozessierbarkeit zu schaffen. KW - Elektrochemie KW - Chemie KW - Anode KW - Kohlenstoff KW - Superkondensator KW - OLC KW - SIB KW - PEDOT KW - Supercap Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-317956 ER - TY - THES A1 - Shamburger, William T1 - Total Synthesis of Mono- and Dimeric Naphthylisoquinoline Alkaloids and Related Analogs T1 - Totalsynthese von monomeren und dimeren Naphthylisochinolin-Alkaloiden und davon abgeleiteten Analoga N2 - Our research group focusses on the isolation, structural elucidation, and synthesis of bioactive natural products, among others, the naphthylisoquinoline alkaloids from tropical lianas. This intriguing class of compounds comprises representatives with activities against, e.g. P. falciparum, the cause of Malaria tropica, against the neglected disease leishmaniasis, and, as discovered more recently, against different types of cancer cells. Based on the high potency of theses extraordinary secondary metabolites, this thesis was devoted to the total synthesis of bioactive natural products and closely related analogs. N2 - Die bemerkenswerte Substanzklasse der Naphthylisochinolin-Alkaloide enthält Wirkstoffe mit Aktivitäten gegen P. falciparum, den Erreger der Malaria tropica, gegen Leishmaniose und, wie erst kürzlich entdeckt, Wirkstoffe mit Aktivität gegenüber Zelllinien verschiedener Krebsarten. Aufgrund der hohen Wirksamkeit dieser außergewöhnlichen Sekundärmetabolite wurde die vorliegende Doktorarbeit auf die Totalsynthese bioaktiver Naphthylisochinoline und davon abgeleiteter Derivate ausgerichtet. KW - Naphthylisochinolinalkaloide KW - Totalsynthese KW - Dioncophylline C KW - 5'-O-Methyldioncophylline D KW - Ancistrolikokine E3 KW - Jozimine A2 KW - Naphthyl Isoquinolines KW - Total Synthesis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-250612 ER - TY - JOUR A1 - Quast, Helmut A1 - Gescheidt, Georg A1 - Spichty, Martin T1 - Topological dynamics of a radical ion pair: Experimental and computational assessment at the relevant nanosecond timescale JF - Chemistry N2 - Chemical processes mostly happen in fluid environments where reaction partners encounter via diffusion. The bimolecular encounters take place at a nanosecond time scale. The chemical environment (e.g., solvent molecules, (counter)ions) has a decisive influence on the reactivity as it determines the contact time between two molecules and affects the energetics. For understanding reactivity at an atomic level and at the appropriate dynamic time scale, it is crucial to combine matching experimental and theoretical data. Here, we have utilized all-atom molecular-dynamics simulations for accessing the key time scale (nanoseconds) using a QM/MM-Hamiltonian. Ion pairs consisting of a radical ion and its counterion are ideal systems to assess the theoretical predictions because they reflect dynamics at an appropriate time scale when studied by temperature-dependent EPR spectroscopy. We have investigated a diketone radical anion with its tetra-ethylammonium counterion. We have established a funnel-like transition path connecting two (equivalent) complexation sites. The agreement between the molecular-dynamics simulation and the experimental data presents a new paradigm for ion–ion interactions. This study exemplarily demonstrates the impact of the molecular environment on the topological states of reaction intermediates and how these states can be consistently elucidated through the combination of theory and experiment. We anticipate that our findings will contribute to the prediction of bimolecular transformations in the condensed phase with relevance to chemical synthesis, polymers, and biological activity. KW - ion pairing KW - radical anion KW - kinetics KW - thermodynamics KW - molecular dynamics KW - QM/MM KW - EPR Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285195 SN - 2624-8549 VL - 2 IS - 2 SP - 219 EP - 230 ER - TY - THES A1 - Wagenhäuser [geb. Vonhausen], Yvonne T1 - Thermodynamic Investigations on the Dimerization and Anti-Cooperative Self-Assembly of Dipolar Merocyanines T1 - Thermodynamische Untersuchungen zur Dimerisierung und anti-kooperativen Selbstassemblierung von dipolaren Merocyaninen N2 - Dipolar merocyanines are very attractive supramolecular building blocks, as they combine interesting functional properties with strong, directional intermolecular interactions. The pyridine dioxocyano-pyridine (PYOP) chromophore (Chapter 2.2), used in this thesis, stands out because of its exceptionally high ground state dipole moment (g ~ 17 D), in combination with the option to retain good solubility also in unpolar solvents, by decoration with solubilizing groups. The reliable binding motif of anti-parallel -stacking due to dipole-dipole interactions has allowed the design of molecular building blocks that form assemblies of predictable geometry. The intense unstructured charge transfer UV/Vis absorption band (eg ~ 10.7 D) is a result of the dominant contribution of the zwitterionic resonance structure which brings the PYOP chromophore just beyond the cyanine limit in solvents of low polarity (c2 = 0.60, 1,4 dioxane). The high sensitivity of the S0 – S1 UV/Vis absorption band to the environment manifests itself in a pronounced negative solvatochromism and strong H-type exciton coupling within -stacked PYOP assemblies. In accordance with the classical molecular exciton theory, an increasing hypsochromic shift of the dominant absorption band of these H aggregates can be observed as the stack size increases up to about six chromophores, where it levels out at about max ~ 440 nm (CHCl3). This allows a uniquely simple estimation of the number of interacting chromophores within the self-assembled structure from a single UV/Vis absorption spectrum of an aggregate. The defined and well investigated PYOP dimer formation was employed in this thesis to probe the applicability and limitations of concentration-, temperature-, and solvent-dependent self-assembly studies (Chapter 3). Straightforward theoretical models to evaluate datasets of concentration-, temperature-, and solvent-dependent UV/Vis absorption by nonlinear regression analysis were derived for the case of dimer formation (Chapter 2.1). Although the dimer model is well known and widely applied in literature, this detailed derivation is helpful to understand assumptions and potential problems of the different approaches for the determination of thermodynamic parameters. This helps to decide on the most appropriate method to analyse a system of interest. In this regard it should be noted that covering a large portion of the self-assembly process with the experimental data is a prerequisite for the accuracy of the analysis. Additionally, many of the insights can also be transferred to other self-assembly systems like supramolecular polymerization or host-guest interactions. The concentration-dependent analysis is the most straightforward method to investigate self-assembly equilibria. No additional assumptions, besides mass balance and mass action law, are required. Since it includes the least number of parameters (only K, if M/D are known), it is the most, or even only, reliable method, to elucidate the self-assembly mechanism of an unknown system by model comparison. To cover a large concentration range, however, the compound must be soluble enough and generally sample amounts at least in the low mg scale must be available. The temperature-dependent analysis has the advantage that all thermodynamic parameters G0, H0 and S0 can be obtained from a single sample in one automated measurement. However, the accessible temperature-range is experimentally often quite limited and dependent on the solvent. For systems which do not show the transition from monomer to aggregate in a narrow temperature range, as given for, e.g., cooperative aggregation or processes with a high entropy contribution, often not the entire self-assembly process can be monitored. Furthermore, the assumptions of temperature-independent extinction coefficients of the individual species as well as temperature-independent H0 and S0 must be met. Monte Carlo simulations of data sets demonstrated that even minor changes in experimental data can significantly impact the optimized values for H0 and S0. This is due to the redundancy of these two parameters within the model framework and even small thermochromic effects can significantly influence the results. The G0 value, calculated from H0 and S0, is, however, still rather reliable. Solvent-dependent studies can often cover the entire self-assembly process from monomeric (agg = 0) to the fully aggregated state (agg = 1). However, for dyes with strong solvatochromic effects, such as the dipolar merocyanines investigated in this thesis, the results are affected. Also, the assumption of a linear relation of the binding energy G0 and the fraction of denaturating solvent f, which is based on linear free energy relationships between G0 and the solvent polarity, can lead to errors. Especially when specific solvent effects are involved. For the evaluation of experimental data by nonlinear regression, general data analysis software can be used, where user-defined fit models and known parameters can be implemented as desired. Alternatively, multiple specialized programs for analysing self-assembly data are available online. While the latter programs are usually more user-friendly, they have the disadvantage of being a “black box” where only pre-implemented models can be used without the option for the user to adapt models or parameters for a specific system. In Chapter 3 comprehensive UV/Vis absorption datasets are presented for the dimerization of merocyanine derivative 1 in 1,4-dioxane, which allowed for the first time a direct comparison of the results derived from concentration-, temperature-, and solvent-dependent self-assembly studies. The results for the binding constant K and corresponding G0 from the concentration- and temperature-dependent analysis were in very good agreement, also in comparison to the results from ITC. For the temperature-dependent analysis, though, multiple datasets of samples with different concentration had to be evaluated simultaneously to cover a meaningful part of the self-assembly process. Furthermore, a significant dependence of the optimized parameters H0 and S0 on the wavelength chosen for the analysis was observed. This can be rationalized by the small thermochromic shifts of both the monomer and the dimer UV/Vis absorption band. The results from the solvent-dependent evaluation showed the largest deviation, as expected for the highly solvatochromic merocyanine dye. However, even here by evaluation at 491 and 549 nm the deviation for G0 was only 2.5 kJ mol1 (9%) with respect to the results from the concentration-dependent analysis (G0 = 29.1 kJ mol1). Thus, despite the strong solvatochromism of the dipolar chromophore, it can still be considered a reliable method for estimating the binding strength. Furthermore, multiple repetitions of the concentration-, temperature-, and solvent-dependent studies provided insight into the reproducibility of the results and possible sources of experimental errors. In all cases, the deviations of the results were small (G0 < 0.4 kJ mol1) and within the same range as the fit error from the nonlinear regression analysis. The insights from these studies were an important basis for the in-depth investigation of a more complex supramolecular system in Chapter 4, as a single method is often not enough to capture the full picture of a more complicated self-assembly process. To elucidate the anti-cooperative self-assembly of the chiral merocyanine 2, a combination of multiple techniques had to be applied. Solvent-dependent UV/Vis absorption studies in CH2Cl2/MCH mixtures showed the step-wise assembly of the merocyanine monomer (max(M) = 549 nm, CH2Cl2) to first a dimer (max(D) = 498 nm, CH2Cl2/MCH 15:85) by dipole-dipole interactions, and then a -stacked higher aggregate (max(H) = 477 nm, MCH), with pronounced H-type coupling. The thermodynamic evaluation of this data, however, suffered from the severe solvatochromism, especially of the monomeric species (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Therefore, concentration-dependent studies were performed at three different temperatures (298, 323, 353 K) to elucidate the self-assembly mechanism and determine reliable thermodynamic parameters. The studies at elevated temperatures were hereby necessary, to obtain experimental data over a larger agg--range. Due to the pronounced difference in the thermodynamic driving force for dimerization and higher aggregate formation (KD/K5 = 6500) a concentration range exists in MCH where almost exclusively the dimer species of 2 is present, before further self-assembly by dispersion interactions occurs. Therefore, the data could be evaluated independently for the two self-assembly steps. The self-assembly of dimers into the higher aggregate could not be described by the isodesmic model but was fitted satisfactorily to a pentamer model. This rather small size of about ten -stacked PYOP chromophores was, furthermore, consistently indicated by AFM, VPO and DOSY NMR measurements. Based on 1D and 2D NMR data as well as the strong bisignate CD signal of the higher aggregate in combination with TD-DFT calculations, a P-helical stack is proposed as its structure. The small size can be rationalized by the anti-cooperative self-assembly mechanism and the sterical demand of the solubilizing trialkoxyphenyl and the chiral tetralin substituents. Additionally, the aliphatic shell formed by the solubilizing chains around the polar chromophore stack, can account for the exceptionally high solubility of 2 in MCH (> 15 mg mL1). These combined studies of the self-assembly process enabled the identification of suitable conditions for the investigation of fluorescence properties of the individual aggregate species. Aggregation-induced emission enhancement was observed for the almost non-emissive monomer (Fl(M) = 0.23%), which can be rationalized by the increasing rigidification within the dimer (Fl(D) = 2.3%) and the higher aggregate (Fl(H) = 4.5%). The helical chirality of the PYOP decamer stack, furthermore, gave rise to a strong CPL signal with a large glum value of 0.011. The important conclusion of this thesis is that the temperature- and solvent-dependent analyses are valid alternatives to the classical concentration-dependent analysis to determine thermodynamic parameters of self-assembly equilibria. Although, for a specific supramolecular system, one approach might be favourable over the others for a variety of reasons. The experimental limitations often demand a combination of techniques to fully elucidate a self-assembly process and to gain insights in the aggregate structure. The anti-cooperative merocyanine self-assembly, which was described here for the first time for the PYOP merocyanine 2, is no exception. Besides the interest in the merocyanine assemblies from a structural and functional point of view, the insights gained from the presented studies can also be transferred to other self-assembly systems and be a guide to find the most appropriate analysis technique. N2 - Dipolare Merocyanine sind sehr attraktive supramolekulare Bausteine, da sie interessante funktionale Eigenschaften mit starken, gerichteten zwischenmolekularen Wechselwirkungen vereinen. Der Pyridin-dioxocyano-pyridin (PYOP)-Chromophor (Kapitel 2.2), welcher in dieser Arbeit verwendet wurde, zeichnet sich durch sein besonders starkes Grundzustands-dipolmoment (g ~ 17 D) aus, in Kombination mit der Möglichkeit durch Funktionalisierung mit löslichkeitsvermittelnden Gruppen dennoch gute Löslichkeit zu bewahren. Das zuverlässige Bindungsmotiv der durch Dipol-Dipol Wechselwirkungen anti-parallel  gestapelten Merocyanine ermöglicht es, gezielt molekulare Bausteine zu entwerfen, welche sich zu Strukturen von vorhersagbarer Geometrie zusammenlagern. Der dominante Beitrag der zwitterionischen Resonanzstruktur führt zu einer intensiven, unstrukturierten Charge-Transfer UV/Vis-Absorptionsbande (eg ~ 10.7 D) und bringt den PYOP Chromophor leicht jenseits des Cyanin-Limits in unpolaren Lösungsmitteln (c2 = 0.60, 1,4-Dioxan). Die Sensitivität der S0 S1 UV/Vis-Absorptionsbande gegenüber der Umgebung zeigt sich in der ausgeprägten negativen Solvatochromie und einer starken H artigen excitonischen Kopplung in -gestapelten Aggregaten. In Übereinstimmung mit klassischer Excitonen-Theorie kann eine zunehmende hypsochrome Verschiebung der dominanten Absorptionsbande mit zunehmender Größe der H-Aggregate beobachtet werden, bis bei etwa sechs Chromophoren und max ~ 440 nm ein Plateau erreicht wird. Dies ermöglicht eine einmalig einfache Abschätzung, der Anzahl an wechselwirkenden Chromophoren innerhalb einer Aggregatstruktur, basierend auf einem einzigen UV/Vis-Absorptionsspektrum. Das definierte und gut untersuchte Beispiel des PYOP-Dimers wurde in dieser Arbeit verwendet, um die Anwendbarkeit und die Grenzen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien auszutesten (Kapitel 3). Theoretische Modelle zur thermodynamischen Auswertung von konzentrations-, temperatur- und lösungsmittelabhängigen Studien mittels nichtlinearer Regression wurden für das Beispiel der Dimerisierung hergeleitet (Kapitel 2). Obwohl das Dimer-Modell literaturbekannt ist, ist diese detaillierte Herleitung hilfreich, um die Annahmen zu verstehen, die dem Modell zugrunde liegen. So können potenzielle Problemquellen der verschiedenen Methoden erkannt und die geeignetste Methode zur Bestimmung der thermodynamischen Parameter für ein bestimmtes System ausgewählt werden. Hierbei sollte man beachten, dass es sich für die Aussagekraft der Analyse klar als zuträglich erwiesen hat, wenn ein möglichst großer Bereich des Aggregationssprozesses von den experimentellen Daten abgedeckt werden kann. Viele der hier gewonnen Erkenntnisse lassen sich auch auf andere Systeme wie supramolekulare Polymere oder Wirt-Gast-Komplexe übertragen. Die konzentrationsabhängige Analyse ist die direkteste Methode, um ein supramolekulares Gleichgewicht zu untersuchen. Sie erfordert keine zusätzlichen Annahmen, außer dem Massenerhalt und dem Massenwirkungsgesetz. Da das konzentrationsabhängige mathematische Modell die wenigsten Parameter enthält (nur K, wenn M/D bekannt), ist es die zuverlässigste, wenn nicht sogar die einzig zuverlässige, Methode, um den Aggregationsmechanismus durch einen Vergleich der experimentellen Daten mit verschiedenen Modellen aufzuklären. Allerdings muss die zu untersuchende Verbindung hierbei löslich genug sein, damit ein großer Teil des Aggregationsprozesses in den Studien abgebildet werden kann und es werden üblicherweise Substanzmengen im niedrigen mg Bereich benötig. Die temperaturabhängige Analyse hat den Vorteil, dass alle thermodynamischen Parameter G0, H0 und S0 in einer einzigen automatisierten Messung einer einzelnen Probe erhalten werden können. Allerdings ist der experimentell zugängliche Temperaturbereich oft sehr eingeschränkt und abhängig von dem verwendeten Lösungsmittel. Für Systeme, bei denen der Übergang vom Monomer zum Aggregat nicht in einem engen Temperaturbereich erfolgt, z.B. aufgrund von Kooperativität oder einem großen Entropie-Beitrag, ist es oft nicht möglich den gesamten Aggreationsprozess abzubilden. Zusätzlich sollten die Annahmen, dass sowohl die Extinktionskoeffizienten der einzelnen Spezies sowie H0 und S0 temperaturunabhängig sind, zutreffen. Mittels Monte Carlo Simulationen konnte gezeigt werden, dass selbst kleine Änderungen in den experimentellen Daten die erhaltenen Werte von H0 und S0 deutlich beeinflussen können. Dies liegt daran, dass die beiden Parameter im mathematischen Modell nicht völlig unabhängig voneinander sind. Selbst geringfügige thermochrome Veränderungen können daher die Ergebnisse für H0 und S0 beeinflussen. Die G0-Werte, die sich aus H0 und S0 berechnen lassen, sind allerding dennoch recht zuverlässig. Mittels lösungsmittelabhängiger Studien ist es oft am einfachsten, den vollständigen Prozess vom Monomer (agg = 0) bis zum Aggregat (agg = 1) abzubilden. Für stark solvatochrome Farbstoffe wie die hier untersuchten dipolaren Merocyanine werden die Ergebnisse allerdings deutlich verfälscht. Auch die Annahme einer linearen Abhängigkeit der Bindungsenergie G0 und der Lösungsmittelzusammensetzung f, die auf linearen Freie-Energie Beziehungen zwischen G0 und der Lösungsmittelpolarität beruhen, kann zu Abweichungen führen, vor allem, wenn spezifische Lösungsmitteleffekte involviert sind. Die Auswertung der experimentellen Daten erfolgt mittels nichtlinearer Regression. Hierfür können diverse Datenauswertungsprogramme genutzt werden, in die sich benutzerdefinierte Modelle inklusive bekannter Parameter implementieren lassen. Alternativ gibt es auch eine Auswahl von spezialisierten Programmen zur Auswertung von Aggregationsdaten im Internet. Diese sind zwar deutlich benutzerfreundlicher, aber auch „Black Boxes“, deren voreingestellte Modelle und Parameter in der Regel nicht vom Nutzer für ein spezielles System angepasst werden können. In Kapitel 3 wurden umfangreiche UV/Vis-Absorptionsstudien für die Dimerisierung von Merocyanin 1 in 1,4-Dioxan vorgestellt, welche zum ersten Mal einen direkten Vergleich zwischen den Ergebnissen von konzentrations-, temperatur- und lösungsmittelabhängigen Aggregationsstudien ermöglichten. Die Ergebnisse für die Bindungskonstante K und dem dazugehörigen G0-Wert aus der konzentrations- und temperaturabhängigen Analyse stimmen mit den Ergebnissen der isothermalen Titrationskalorimetrie (ITC) überein. Bei der temperaturabhängigen Auswertung mussten allerdings mehrere Datensätze von Proben mit unterschiedlichen Konzentrationen zusammen ausgewertet werden, um einen aussagekräftigen Bereich des Aggregationsprozesses abzudecken. Außerdem wurde eine deutliche Abhängigkeit der Ergebnisse für H0 und S0 von der Wellenlänge festgestellt, die für die Auswertung gewählt wurde. Dies liegt an der kleinen thermochromen Verschiebung der Monomer- und Dimer-Absorptionsbande. Die Ergebnisse der lösungsmittelabhängigen Studien zeigten, wie für den stark solvatochromen Chromophor erwartet, die größte Abweichung. Allerdings beträgt die Abweichung für G0 selbst hier nur 2.5 kJ mol1 (9%), bei Auswertung bei 491 und 549 nm, im Vergleich zur konzentrationsabhängigen Auswertung (G0 = 29.1 kJ mol1). Trotz der ausgeprägten Solvatochromie sind die lösungsmittelabhängigen Studien also geeignet, um die Bindungsstärke eines Systems abzuschätzen. Mehrmalige Wiederholung der Experimente erlaubte eine Abschätzung der Reproduzierbarkeit der Ergebnisse und möglicher Fehlerquellen. Die Ergebnisse schwankten hierbei in allen Fällen nur geringfügig (G0 < 0.4 kJ mol1) und in der gleichen Größenordnung wie der Fehler der nichtlinearen Regression. Die Erkenntnisse aus diesen Studien waren eine wichtige Grundlage für die Untersuchung eines komplexeren supramolekularen Systems in Kapitel 4. Eine einzelne Methode ist oft nicht ausreichend, um einen mehrstufigen Aggregationsprozess vollständig aufzuklären, und auch zur Aufklärung der anti-kooperativen Aggregation des chiralen Merocyanins 2, wurde eine Kombination verschiedener Techniken angewandt. Lösungsmittelabhängige UV/Vis-Absorptionsstudien in CH2Cl2/MCH Mischungen zeigten die stufenweise Zusammenlagerung der Merocyanin-Monomere (max(M) = 549 nm, CH2Cl2) zuerst durch Dipol-Dipol Wechselwirkungen zu Dimeren (max(D) = 498 nm, CH2Cl2/MCH 15:85) und dann zu größeren -Stapeln (max(H) = 477 nm, MCH) mit ausgeprägter H-Kopplung. Die thermodynamische Auswertung dieser Daten leidet allerdings unter der ausgeprägten Solvatochromie, vor allem der Monomer-Spezies (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Daher wurden stattdessen konzentrationsabhängige Studien bei verschiedenen Temperaturen durchgeführt, um den Aggregationsmechanismus aufzuklären und verlässliche thermodynamische Parameter zu bestimmen. Die Studien bei höheren Temperaturen waren notwendig, um mit den experimentellen Daten einen größeren agg--Bereich abdecken zu können. Aufgrund des ausgeprägten Unterschieds in der thermodynamischen Triebkraft für die Dimerisierung und die Bildung höherer Aggregate (KD/K5 = 6500) gibt es in MCH einen Konzentrationsbereich, in dem fast ausschließlich die dimere Spezies vorhanden ist, bevor eine weitere Zusammenlagerung durch Dispersionswechselwirkungen erfolgt. Dies ermöglichte eine unabhängige Auswertung der Daten für die beiden Aggregationsschritte. Der Zusammenschluss von Dimeren zum höheren Aggregat ließ sich nicht durch das isodesmische Modell beschreiben, sondern durch ein Pentamer-Modell. Diese Größe von etwa zehn -gestapelten PYOP-Chromophoren wurde außerdem durch AFM-, VPO- und DOSY-NMR-Messungen bestätigt. Basierend auf 1D- und 2D-NMR-Daten und dem CD-Signal des höheren Aggregats mit positivem Cotton-Effekt in Kombination mit TD-DFT Rechnungen, wurde ein P-helikaler -Stapel als Struktur angenommen. Die geringe Größe lässt sich durch den anti-kooperativen Aggregationsmechanismus und den sterischen Anspruch der lösungsvermittelnden Trialkoxyphenyl- und der chiralen Tetralin-Substituenten erklären. Die durch diese Substituenten ausgebildete aliphatische Hülle um den polaren Chromophorstapel kann außerdem die ungewöhnlich hohe Löslichkeit der Verbindung 2 in MCH erklären (> 15 mg mL1). Die detaillierte Untersuchung des Selbstorganisationsprozesses ermöglichte die Identifizierung geeigneter Bedingungen für die Untersuchung der Fluoreszenzeigenschaften der einzelnen Aggregatspezies. Für das nahezu nicht emittierende Monomer (Fl(M) = 0.23%) wurde durch zunehmende Rigidisierung im Dimer (Fl(D) = 2.3%) und im höherem Aggregat (Fl(H) = 4.5%) eine durch Aggregation induzierte Emissionssteigerung beobachtet. Die helikale Chiralität des PYOP-Decamer-Stapels führte außerdem zu einem starken CPL Signal mit einem hohen glum-Wert von 0.011. Das wichtige Fazit dieser Arbeit ist, dass sowohl temperatur- als auch lösungsmittelabhängige Studien valide Alternativen zu den klassischen konzentrationsabhängigen Untersuchungen sind, mit denen thermodynamische Parameter von Selbstorganisations-Gleichgewichten bestimmt werden können. Wobei für ein bestimmtes supramolekulares System eine der Methoden aus verschiedenen Gründen vorteilhafter sein kann als die anderen. Üblicherweise gegebene experimentelle Beschränkungen erfordern oft den kombinierten Einsatz von Techniken, um einen Selbstorganisationsprozess und die Aggregatstrukturen vollständig aufzuklären. Die anti-kooperative Merocyanin-Selbstorganisation, die hier zum ersten Mal für das PYOP-Merocyanin 2 beschrieben wurde, ist keine Ausnahme. Neben dem Interesse an den Merocyanin-Aggregaten aus struktureller und funktioneller Sicht können die aus den vorgestellten Studien gewonnenen Erkenntnisse auch auf andere Selbstassemblierungs-systeme übertragen werden und als Leitfaden für die Suche nach der am besten geeigneten Analysemethode dienen. KW - Merocyanine KW - Supramolekulare Chemie KW - Self-Assembly Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-352111 ER - TY - JOUR A1 - Christl, Manfred A1 - Heinemann, U. A1 - Kristof, W. T1 - Thermal Rearrangement of Some Endo-Endo'-Bridged Bicyclo[1.1.0]butanes N2 - No abstract available KW - Organische Chemie Y1 - 1975 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57967 ER - TY - JOUR A1 - Wortmann-Saleh, D. A1 - Engels, Bernd A1 - Peyerimhoff, S. D. T1 - Theoretical Study of the Reaction O(\(^3\)P) + C\(_2\)H\(_4\) and comparison with the \(^3\)CH\(_3\) + C\(_2\)H\(_4\) Reaction N2 - The minimum energy path for the reaction O(\(^3\)P\(_g\)) + C\(_2\)H\(_4\)(\(^1\)A\(_g\)) has been calculated by optimizing all relevant geometrical parameters along the approach of oxygen to ethene. A barrier of 4.7 kcal/mol in the \(^3\)A"( ... 9a'\(^2\)- 10a'3a") potential energy surface and an energy difference of 14.4 kcal/mol between the product and the fragments is found at the multireference-configuration interaction level. The corresponding values at the lower-level treatment CASSCF are 9 kcal/mol for the barrier and 9 kcal/mol for the depth of the potential; this shows the importance of inclusion of electron correlation. The barrier for CH\(_2\) rotation for the lowestenergy structure (asymmetric OC\(_2\)H\(_4\)) is around 5 kcal/mol. The energy gap to the first excited state \(^3\)A'( ... 9a'l0a'3a'12) is found tobe 3.6 kcal/mol in MRD-CI calculations at the ground-state minimum. Comparison with \(^3\)CH\(_2\) + C\(_2\)H\(_4\) shows that in this system the lowest-energy surface is \(^3\)A', i.e., the state which is the excited state in 0 + C\(_2\)H\(_4\). This difference in energy ordering of \(^3\)A' and \(^3\)A" states results from the fact that the p\(_x\), p\(_y\), p\(_z\) degeneracy of oxygen orbitals is lifted in \(^3\)CH\(_2\)leading to b\(_1\), b\(_2\). and a\(_1\) MOs whereby the lowest b\(_2\) (a") remains doubly occupied; as a consequence, the reaction pattem between the oxygen and \(^3\)CH\(_2\) approach is different, which is also quite apparent in the calculated charge transfer. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59076 ER - TY - JOUR A1 - Engels, Bernd A1 - Peyerimhoff, S.D. A1 - Skell, P.S. T1 - Theoretical study of the potential energy surface governing the stereochemistry in ClC\(_2\)H\(_4\) reactions N2 - Large-scale multireference configuration interaction calculations in a double·t·type AO basis including polarization functions are carried out for the potential surface of the ClC\(_2\)H\(_4\9 system. The charge distribution for various extreme points of the surface is discussed. The absolute minimum is found for an asymmetric ClC2H4 structure. The symmetrical bridged nuclear conformation is also found to be stable with respect to dissociation into Cl + C\(_2\)H\(_4\)• The activation energy for rotation about the C-C axis is calculated tobe around 18 kJ/mol, which is comparable tothat for the 1,2 migration {around 26 kJ/mol). The stereochemistry is governed by the fact that addition of CI to C\(_2\)H\(_4\) (or dissociation) is a two-step reaction proceeding through a symmetrica1 intermediate. The direct addition pathway possesses a small barrier of about 8 kJ jmol. KW - Organische Chemie Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58851 ER - TY - JOUR A1 - Huang, M.-B. A1 - Suter, H. U. A1 - Engels, Bernd T1 - Theoretical Study of the Dimethylamino Radical (CH\(_3\))\(_2\)N and its protonated cation (CH\(_3\))\(_2\)NH\(^+\) N2 - In the present work the dimethylamino radical ( ( CH\(_3\)) \(_2\)N) and its protonated cation ( ( CH\(_3\))\(_2\)NH\(^+\)) are investigated by means of ab initio methods. The geometries of various conformations of both compounds are obtained with UMP2/6·31 G** calculations, while the hyperfine structure and its dependence on the geometry is studied using the MRD-Cl/B\(_K\) method. The two molecules are compared to study the inftuence of the protonation on geometry and hyperfine structure. The effects of the rotational barriers on the hyperfine structures of (CH\(_3\))\(_2\)N, (CH\(_3\)CH\(_2\))\(_2\)N and ( (CH\(_3\))\(_2\)CH)\(_2\)N will be discussed. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59047 ER - TY - JOUR A1 - Engels, Bernd A1 - Peyerimhoff, S. D. T1 - Theoretical study of the bridging in β-Halo Ethyl N2 - Large-acale multi-reference configuration interaction (MRD-CI) calculations in a quite flexible AO basis are employed to study the energy hypersurface for the reaction intermediates XC\(_3\)H\(_4\) with X = Cl, Br and F. Particular emphasis is therby placed on determining the equilibrium conformations, the CH\(_2\) rotation barrier and the energy surface for a possible bridging (shuttling motion (1a] of X between the two carbon centers). The absolute minimum in the potential energy surface is found in all three cases for the asymmetric ß-halo radical in general agreement with ESR data at an XCC angle of ca. 110°, a c-c separation somewhat shorter than a single bond and an approximate sp3 type hybridization (\(\alpha _2 \approx \) 135-140°). In FC\(_2\)H\(_4\) the energy difference between the minimum in the symmetric conformation and the absolute minimum is found to be more than 30 kcal so that shuttling seems impossible in agreement with experimental findings. In BrC\(_2\)H\(_4\) the difference between these two potential minima is only between 1-2 kcal, i.e., smaller than the barrier to CH\(_2\), rotation, so that· shuttling is favored, while ClC\(_2\)H\(_4\) takes an intermediate position between these extremes. The use of correlated wavefunctions is found to be quite important for such a study; the results are related to various kinetic studies of these radicals. KW - Organische Chemie Y1 - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58779 ER - TY - JOUR A1 - Engels, Bernd A1 - Peyerimhoff, S.D. T1 - Theoretical study of FC\(_2\)H\(_4\) N2 - Large-scale multireference configuration interaction (MRD-CI) calculations in a quite flexible AO basis are employed to study the energy hypersurface for the reaction intermediate FC\(_2\)H\(_4\) • The reaction F + C\(_2\)H\(_4\) -> FC\(_2\)H\(_4\) as weil as the 1,2 migration of the fluorine atom in FC\(_2\)H\(_4\) is investigated. In addition the rotation around the CC bond in the optimum conformation is studied. The absolute minimum in the potential energy is found for the asymmetric structure but the symmetric structure is also found to be stable with respect to the dissociation, so that a shuttling of the fluorine atom is in principle possible but highly unlikely because ( l) the activation energy is high ( II 5-130 kJ fmol) and the saddle point lies only 4(}-50 kJ jmol below the dissociation Iimit of F + C\(_2\)H\(_4\) and (2) the competitive motion, i.e., rotation around the CC axis, is nearly free (I 1-17 kJ/mol). KW - Organische Chemie Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58824 ER - TY - THES A1 - Sturm, Christian T1 - Theoretical Investigation of the Geometrical Arrangements of alpha-alanyl-peptide Nucleic Acid Hexamer Dimers and the Underlying Interstrand Binding Motifs T1 - Theoretische Untersuchungen der geometrischen Anordnung der alpha-Alanyl-Peptid-Nukleinsäure-Hexamer-Dimere und deren Interstrang-Bindungsmotive N2 - Die Funktionalitäten der DNA oder RNA werden hauptsächlich durch die verschiedenen Wechselwirkungen der paarenden Nucleinbasen bestimmt. Um die komplexen Zusammenhänge dieser verschiedenen Wechselwirkungen zu verstehen, werden Modellsysteme benötigt, die weniger Restriktionen durch das Rückgrat besitzen. Ein Beispiel für solche Systeme sind Peptidnucleinsäuren (PNA), in denen das Zuckerphosphatrückgrat der DNA oder RNA durch ein Peptidrückgrat ersetzt wird. Diederichsen et al. gelang es, eine große Anzahl solcher Systeme mit einen alpha-Alanyl-Rückgrat zu synthetisieren, an das kanonische und nicht-kanonische Nucleinsäuren gebunden sind. Diese Systeme aggregieren in verschiedenen Bindungsmotiven, die nicht in der DNA oder RNA auftauchen. Diese ungewöhnlichen Paarungsmotive könnten einen tiefen Einblick in das Zusammenspiel der Wechselwirkungen der Nucleinbasen geben, aber die geringen Löslichkeit der alpha-Alanyl-PNA Oligomere verhinderte eine experimentelle Charakterisierung der geometrischen Anordnung durch Röntgenstruktur- oder NMR-Experimente. Lediglich die absolute Stabilität der verschiedenen Aggregate konnte durch Messungen der Schmelztemperatur mit Hilfe der UV-Spektroskopie bestimmt werden. Da die Kenntnis der geometrischen Strukturen sowie der ausgebildeten Bindungsmotive wichtig ist, um einen Einblick in das Zusammenspiel der einzelnen Wechselwirkungen zu erlangen, besteht das Ziel der vorliegenden Arbeit darin, solche Informationen mit der Hilfe von theoretischen Methoden zu erlangen. Zusätzlich sind Effekte von Interesse, aus denen sich Trends bezüglich der Stabilität bestimmen lassen. Solche Untersuchungen sind einfacher zu realisieren als die Berechnung der absoluten Stabilitäten, da viele Beiträge zur absoluten Energie für ähnliche Systeme (entropische und dynamische Effekte) in etwa gleich groß sind. Somit sind diese entropischen und dynamischen Effekte für das Ziel dieser Arbeit weniger wichtig. Zur Untersuchung der Bindungseigenschaften und der Stabilitäten von alpha-Alanyl-PNA Oligomeren war es notwendig, bis dato nicht parametrisierte Nucleinbasen in den Parametersatz des Amber4.1 Kraftfelds zu integrieren. Die fehlenden Ladungen wurden durch Berechungen mit dem R.E.D-Programm-Paket ermittelt. Das Programm bestimmt aus dem elektrostatischen Potential einer optimierten Struktur die atomzentrierten Ladungen. Die fehlenden Bindungsparameter wurden der Literatur entnommen. Die Untersuchungen der einzelnen Dimere begannen jeweils mit der Konstruktion der alpha-Alanyl-PNAs für alle möglichen Paarungsmodi. Es konnte gezeigt werden, dass bestimmte Paarungsmodi aufgrund der geometrischen Gegebenheiten der Dimere und des Rückgrats nicht realisierbar waren. Für andere Dimere war ein Aufbau der alpha-Alanyl-PNA-Dimere zwar möglich, jedoch zerfielen die Dimere wieder während einer ersten Geometrieoptimierung aufgrund der hohen Spannung im Rückgrat. Die stabilen Systeme wurden zunächst in verschiedenen Molekulardynamik-(MD)-Läufen simuliert. Informationen über die Geometrie bei T=0 K wurden durch Geometrieoptimierungen erhalten, die an verschieden Punkten der MD Läufe gestartet wurden. Die resultierenden Geometrien aus den verschiedenen Anfangspunkten waren identisch. Für die geometrieoptimierten Strukturen wurden für das T=0 K Modell die Wechselwirkungsenergien zwischen den Nucleinbasen und der Einfluss der Rückgrats auf die Stabilität der Dimer in zwei separaten Schritten bestimmt. Im ersten Schritt wurde das Rückgrat entfernt und die Schnittstellen mit Methylgruppen abgesättigt. Die Wechselwirkungsenergie zwischen den Nucleinbasen wurde durch die Differenz der Energien des gesamten Systems und der Summe der Energien der einzelnen Nucleinbasen in der Geometrie des Dimers bestimmt. Aufgrund der durchgeführten Untersuchungen und die sich daraus ergebenen Korrelation der berechneten Stabilisierungsenergien mit der Schmelztemperatur konnte gezeigt werden, dass mit der vorgeschlagenen Methode eine verlässliche Beschreibung der PNA Systeme möglich ist. Für eine weitere Verbesserung des vorgestellten Modells bedarf es zusätzliche Röntgenstruktur- oder NMR-Experimente, die zur Strukturaufklärung der alpha-Alanyl-PNA Dimere entscheidend beitragen. Weitere detaillierte Daten über die Enthalpiebeiträge zur absoluten Energie der verschiedenen Komplexe wären sehr hilfreich, um die vorgestellte Methode zu bestätigen und zu verbessern. Diese Informationen könnten zum einen durch die Auswertung der Form der Schmelzkurve sowie durch Mikrokalorimetrie erhalten werden. Für den Fall, dass die Vorhersagen durch die experimentellen Befunde bestätigt würden, könnte der Ansatz auf verwandte Systeme wie zum Beispiel beta-Alanyl-PNA, DNA oder RNA angewandt werden. Durch diese weiteren Informationen könnte unser Ansatz zusätzlich durch die Berücksichtigung von dynamischen und/oder entropischen Effekte erweitert werden. N2 - The functionalities of DNA and RNA are mainly determined by the various interactions between the pairing nucleobases. To understand the complex interplay of the various interactions model systems are needed in which the interstrand pairing is less restricted by the backbone. Such systems are peptide nucleo acids (PNA) in which the sugar phosphate backbone of DNA or RNA is replaced by a peptide backbone. Diederichsen et al. were able to synthesize a large number of systems with an alpha-alanyl backbone to which canonical and non-canonical nucleobases were attached (alpha-alanyl-PNA). These systems formed aggregates with various binding motifs which do not appear in DNA or RNA. Especially the unusual binding motifs would allow a deep insight into the complex interplay of the interactions between nucleobases but the small solubility of alpha-alanyl PNA oligomers hampers the experimental determination of the geometrical arrangement by X-Ray or NMR. Only the overall stability of the various aggregates could be determined by measurements of melting temperatures via UV spectroscopy. Since a detailed knowledge about the geometrical structure and bonding motifs are necessary to obtain insight into the interplay of the various interactions it is the goal of the present work to achieve such information with the help of theoretical approaches. Additionally we are interested in the effects which govern the trends in the stabilities of the systems. This task should be simpler than an investigation of the absolute stabilities since many contributions (e.g. entropic and dynamic effects) can be expected to be similar for similar systems. Consequently, such effects are less important for our goal. For the investigation of all experimentally tested alpha-alanyl-PNA oligomers it was essential to parameterize the noncanonical nucleobases since they were not implemented in the standard version of the Amber4.1 force field. This was achieved by adding the missing parameters to the Amber Force Field. The charges of each nucleobase were determined by the R.E.D program package. The investigation started with the construction of all possible pairing modes for alpha-alanyl-PNA dimer. It could be observed that certain pairing modes were not realizable due to the geometrical arrangement of the dimer and the restriction of the backbone. For other pairing modes a construction was possible, but due to the geometrical restrictions of the backbone the strain in the system is so high that they fall apart during a first geometry optimization. Stable systems were then simulated by various molecular dynamics (MD)-runs. Information about their geometrical arrangements for T=0 K were obtained from geometry optimizations which were started from various points of the MD-run. The resulting geometries were found to be virtually identical. Information about the interactions within a dimer at T=0 K were obtained from a two step procedure in which the effects connected with the nucleobases and the influence of the backbone are determined separately. It was performed for the optimized geometries. In a first step the backbone was removed and the resulting dangling bonds were saturated by methyl groups. The total interaction energy between the nucleobases can now be estimated by the difference between the energy of the complete system and the sum of the energies of the single nucleobases computed at the geometries they take in the whole system. According to the carried out investigation and the resulting correlation of the melting temperature with the calculated stabilization energies the presented method seems to represent a reliable tool for the description of the PNA systems. Despite this success additional experimental verifications of our method are necessary to ensure its applicability. Such verifications could be based on geometrical information obtained via X-Ray or NMR investigations. More detailed data about entropic an enthalpic contribution to the stability of the various complexes would also be very helpful to verify and improve our approach. Such information could be either obtained from a careful analysis of shape of the melting temperature curve or from microcalorimetric investigations. If such tests confirm our predictions the approach could be extended and applied to neighboring fields as for examples beta-alanyl-PNA, DNA or RNA systems with unusual nucleobases. Such information is also necessary to extend our approach in a way that dynamic and/or entropic effects are also taken into account. KW - Peptid-Nucleinsäuren KW - Räumliche Anordnung KW - Wasserstoffbrückenbindung KW - PNA KW - Wasserstoffbrückenbindung KW - Stacking KW - Nukleinsäure KW - Kraftfeld KW - PNA KW - Hydrogen bond KW - Stacking KW - nucleic acid KW - force field Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-20363 ER - TY - JOUR A1 - Suter, H. U. A1 - Engels, Bernd T1 - Theoretical investigation of ESR parameters: H\(_2\)CN and H\(_2\)CO\(^+\) N2 - The hyperfine structure of the two isoelectronic molecules H\(_2\)CN and H\(_2\)CO\(^+\) in their electronic ground state (X\(^2\)B\(_2\)) is studied. The influence of the atomic orbital (AO), basis sets, of the correlation treatment, and of the. equilibrium geometry on the obtained hyperfine propertles 1s - investigated. It is found that the multireference double excitation-configuration interaction (MRD-CI)/ BK treatment in which an MRD-CI wave function is corrected by a modified B\(_K\) method yields equivalent results to quadratic CI [QCISD(T)], coupled cluster single doubles [CCSD(T)), or Brueckner doubled [BD(T)]. Uncertainties in the equilibrium geometries are found to be the major source for discrepancies between theoretically and experimentally determined isotropic hyperfine coupling constants (hfccs). For the heavier centers, the calculated values of the isotropic hfccs agrees nearly perfectly with experimental values (\(\approx\) 1%-2%). The calculated values for the hydrogens are too low, but using the equilibrium structure suggested by Yamamoto and Sato [J. Chem. Phys. 96, 4157 ( 1992)], the best estimate deviates by less than 3%. KW - Organische Chemie Y1 - 1994 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-59029 ER - TY - THES A1 - Mladenovic, Milena T1 - Theoretical Investigation into the Inhibition of Cystein Proteases T1 - Theoretische Untersuchung der Inhibierung von Cysteinproteasen N2 - Although known about and investigated since the late 1970’s, the picture of the basic principles governing inhibitor strengths and the structure-activity relationships of the cysteine protease inhibition mechanism is still very incomplete. Computational approaches can be a very useful tool for investigating such questions, as they allow the inspection of single, specific effects in isolation from all others, in a manner very difficult to achieve experimentally. The ab initio treatments of such large systems like proteins are still not feasible. However, there is a vast number of computational approaches capable of dealing with protein structures with reasonable accuracy. This work presents a summary of theoretical investigations into cysteine protease cathepsin B using a range of methods. We have concentrated on the investigation of cysteine protease inhibition by epoxide- and aziridine-based inhibitors in order to obtain better insight into these important topics. Various model systems are simulated by means of pure quantum mechanical methods and by hybrid (QM/MM) methods. Both approaches provide a static picture. Dynamical effects are then accounted for by additional molecular dynamics (MD) simulations, using both classical and QM/MM MD approaches. The quantum mechanical approach was used to study very small model systems consisting only of the electrophilic warhead of the inhibitor (both substitituted and not) and molecular moieties simulating a very simplified protein active site (methylthiolate instead of Cys29 and methylimidazolium instead of His199 residue) and solvent surroundings (two waters or two ammonium ions, in combination with a continuum solvent model). Although simple, such a system provides a good description of the most important interactions involved in the inhibition reaction. It also allows investigation of the influence of the properties of the electrophilic warhead on the reaction rate. Beside the properties of the electrophilic warhead, the protein and solvent environment is also an important factor in the irreversible deactivation of the enzyme active site by the inhibitor. The non-covalent interactions of the inhibitor with the oxyanion hole and other subsites of the enzyme, as well as its interaction with the solvent molecules, need to be explicitly taken into account in the calculations, because of their possible impact on the reaction profile. As molecular modeling methods allow the treatment of such large systems, but lack the possibility of describing covalent interactions, our method of choice was the combined quantum mechanics/molecular modeling approach. By splitting the system into a smaller part that undergoes the bond cleavage/formation process and must be treated quantum mechanically, and a larger part, comprised of the rest of the protein, which could be treated using force fields, we managed to simulate the system at the desired precision. Our investigations concentrated on the role of His199 in the inhibition mechanism as well as on the structure-reactivity relationships between cysteine protease and various inhibitors, yielding new insight into the kinetics, regio- and stereospecificity of the inhibition. In particular, our calculations provide the following insights: i.) an explanation for the regioselectivity of the reaction, and original insight into which interactions affect the stereoselectivity; ii.) a clear model which explains the known structure-activity relationships and connects these effects with the pH-dependency of the inhibition; iii.) our computations question the generally accepted two-step model by showing that substituent effects accelerate the irreversible step to such an extent that the achievement of an equilibrium in the first step is doubtful; iv.) by way of theoretical characterizations of aziridine models, the reasons for similarities and differences in the mode of action of epoxide- and aziridine-based inhibitors are elucidated; and finally, v.) combining our results with experimental knowledge will allow rational design of new inhibitors. To account for dynamical effects as well, molecular dynamics (MD) computations were also performed. In these calculations the potential energy was computed at the force field level. The results not only supported and clarified the QM/MM results, but comparison with previous X-ray structures helped correct existing errors in the available geometrical models and resolved inconsistencies in the weighting of various factors governing the inhibition. In the work the first QM/MM MD calculations on the active site of the cysteine proteases are presented. In contrast to the MD simulations, these calculations used potential energies computed at the QM/MM-level. With the help of these computations we sought to address strongly disputed questions about the reasons for the existence of the active site ion pair and its role in the high activity of the enzyme. N2 - Obwohl bereits seit den späten 70ern bekannt und untersucht, ist das Bild über die grundsätzlichen Prinzipien, welche die Wirksamkeit der Inhibition und die Struktur-Aktivitäts-Beziehungen (SAB) der Cysteinprotease-Hemmmechanismen beeinflussen, immer noch sehr unvollständig. In dieser Arbeit wurden quantenmechanische (QM), molekulardynamische (MD) und gemischte quantenmechanische/molekularmechanische (QM/MM) Berechnungen durchgeführt, um die irreversible Inaktivierung des Enzyms durch den Inhibitor, zu untersuchen. Die Stärke von computergestützten Verfahren liegt in der Möglichkeit, den Einfluss einzelner spezifischer Effekte durch das Ausblenden von Umgebungseffekten zu untersuchen. Diese Herangehensweise ist nur sehr schwer im Experiment zu erreichen. Die quantenmechanische Methode wurde benutzt, um sehr kleine Modellsysteme zu untersuchen, welche lediglich aus dem elektrophilen Kerngerüst des Inhibitors und einigen, das aktive Zentrum im Protein vereinfachend darstellenden, Molekülen bestanden. Die Solvensumgebung wurde durch zwei explizite Wassermoleküle und zwei Ammoniumionen in Kombination mit einem Kontinuum-Solvensmodell berücksichtigt. Ein solches vereinfachtes System liefert bereits eine gute Beschreibung der meisten wichtigen Wechselwirkungen während der Inhibierungsreaktion. Es erlaubt die Untersuchung des Einflusses der Eigenschaften des elektrophilen „Warheads“ auf den Reaktionsverlauf. Neben den Eigenschaften des elektrophilen „Warheads“ ist sowohl die Protein- als auch die Solvensumgebung von großer Bedeutung für die irreversible Deaktivierung des aktiven Zentrums des Enzyms durch den Inhibitor. Aufgrund eines möglichen Einflusses auf das Reaktionsprofil müssen Solvensmoleküle sowie die nicht-kovalenten Wechselwirkungen des Inhibitors mit dem Oxyanionloch und anderen Nebenbindungstellen des Enzyms explizit behandelt werden. Berücksichtigt man, dass nur molekularmechanische Methoden eine Behandlung von solch großen Systeme erlauben, im Gegenzug aber nicht in der Lage sind, kovalente Wechselwirkungen zu beschreiben, so wurde als Methode der Wahl ein kombinierter QM/MM Ansatz gewählt. Durch das Aufteilen des Gesamtsystems in einen kleinen Bereich, der die Bindungsspaltung- und Bindungsbildungsreaktionen beinhaltet (mit QM behandelt), und in einen großen Teil, welcher den Rest des Proteins umfasst (mit MM behandelt), waren wir in der Lage, das System mit gewünschter Genauigkeit zu simulieren. In den Kapiteln 3.2.2 bis 3.2.4 werden die Struktur-Reaktivitäts-Beziehungen (SRB) zwischen der Cysteinprotease und verschiedenen Inhibitoren vorgestellt. Es wird gezeigt, dass die SRB eine entscheidende Rolle in Kinetik, Regio- und Stereoselektivität der Inhibierung spielen. Um auch die dynamischen Effekte im Anspruch zu nehmen, wurden klassische molekulardynamische (MD) Simulationen durchgeführt. Die Ergebnisse dieser Berechnungen haben nicht nur unterstützt und die QM/MM Ergebnisse näher erklärt, sondern auch durch der Vergleich mit bereits bestehenden Röntgenstrukturen verschiedener Cysteineprotease-Inhibitor-Komplexen geholfen, Fehler in vorhandenen Proteinkristallstrukturen zu korrigieren. Somit wurden Widersprüche in der Bewertung verschiedener Funktionen, die die Inhibierungsreaktion bestimmen, aufgelöst (Kapitel 3.2.5). In der Arbeit werden auch die ersten QM/MM MD Berechnungen vom aktiven Zentrum der Cysteineprotease vorgestellt. Im Kontrast zu den klassischen MD Simulationen, wird in diesen Untersuchungen die potentielle Energie auf dem QM/MM Theorieniveau berechnet. Hier haben wir versucht die stark umstrittene Frage über die Gründe für das Vorhandensein des aktiven Zentrums als His199+/Cys29- Ion-paar und seine Rolle für die hohe Aktivität des Enzyms zu beantworten. KW - Quantenchemie KW - Quantum mechanics / molecular modeling KW - Molecular dynamics Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-25763 ER - TY - THES A1 - Arnone, Mario T1 - Theoretical Characterization and Optimization of Photochemical Alkoxyl Radical Precursors T1 - Theoretische Charakterisierung und Optimierung photochemischer Alkoxylradikalvorläufer N2 - Oxygen-centered radicals are important intermediates in photobiological, mechanistic and synthetic studies. The majority of precursors of reactive oxyl radicals are labile and thus delicate to handle. Therefore N-(alkoxy)-pyridinethiones and N-(Alkoxy)-thiazolethiones have attracted attention as "mild'' photochemical source of alkoxyl radicals, in the last few years. A disadvantage of the pyridine compounds, is their sensibility to daylight. Despite of their similarities, both molecules behave surprisingly different, if photolyzed in the absence of trapping reagents. The pyridinethione compounds undergo highly efficient radical chain reactions under such conditions while the corresponding thiazolethiones react surprisingly sluggish and give rise to several unwanted side products. The properties of both compounds should be understood and optimized in the frame of this work. Additionally new compounds should be suggested that can also be applied in the photochemical alkoxyl radical generation. Some background information about the generation and application of alkoxyl radicals is provided in chapter 2. Electronic excitations and UV/vis spectroscopy together with a description of quantum chemical approaches that are able to calculate such phenomena are outlined in chapter 3. Chapter 4 deals with the description of the vertical excitation spectra. During the validation CASSCF, CASPT2, TD-DFT and RI-CC2 were tested with respect to their ability to describe the vertical excitations in both compounds. The CASPT2 approach gives accurate descriptions of the electronic excitation spectra of all compounds. The time-dependent DFT results are very sensitive on the choice of the functional and a validation of the results should be always done. On the basis of these computations the spectroscopic visible absorption bands of both compounds were assigned to a pi-->pi* transition in the thiohydroxamic acid functionality. In chapter 5 the mechanism of the thermally and the photochemically induced N,O homolysis in both compounds is unveiled. The near UV-induced N,O homolysis will start from the S2 state. The expected relaxation from the S2- to the S1-state and the dissociation process is expected to be very fast in the case of the thiazolethione compound. The potential surfaces of the pyridine compound in contrast point to a slower N,O bond dissociation. Due to the resulting faster dissociation process the excess energy which results from the photochemical activation is quenched only to small amounts. The maximal possible excess energy of the fragments is lower and a quenching is much more likely in the case of the pyridinethione compounds. This explaines the different reactivities of both compounds. For the also already successfully applied precursor system N-(alkoxy)-pyridineones the computed dissociation paths show courses that clearly predict a slow bond dissociation process. Chapter 6 deals with the tuning of the initial excitation wave length of the known pyridinethiones und thiazolethiones. In the first part the effects of substituents on the thiazolethione heterocycle was examined. The UV/vis spectra of 4 and 5 substituted thiazolethiones can be interpreted like the spectrum of the parent compound. The second part of chapter 6 deals with the identification of a substitution pattern on the pyridine heterocycle which induces a blue shift of the photo active band. The computations showed that electron rich and electron poor substituents result the same effects on the electronic excitation spectra. These substituent effects are additive, but the steric orientation of the substituents has to be taken into account. Chapter 7 describes a computer aided design of new alkoxyl radical precursors. Combining the advantages of both compounds the radical formation should be initiated by an irradiation with light at about 350 nm, and the amount of side products during the radical formation process should be small. To achieve this 18 test candidates were obtained by a systematic variation of the parent compound of the thiazolethione precursor. To identify the promising new precursor systems a screening of the lower electronic excitations of all resulting 18 systems was performed with TD-DFT. For promising systems the N,O or P,O dissociation paths, respectively, were analyzed according to the developed model. N-(methoxy)-azaphospholethione and N-(methoxy)-pyrrolethione seem to be the most promising candidates. The computations predict a strong absorption at about 350 nm respectively 320 nm. Due to the amounts of maximal excess energy and the shapes of the potential surfaces of the N,O bond dissociation paths their reactivity should resemble more the behavior of the pyridinethiones. N2 - Sauerstoff zentrierte Radikale sind wichtige organisch chemische Zwischenstufen. Die Mehrzahl der Vorläufer zur Erzeugung von Sauerstoffradikalen sind allerdings instabil und schwer zu handhaben. Deshalb haben N-(Alkoxy)-Pyridinthione und N-(Alkoxy)-Thiazolthione in den letzten Jahren als milde Quelle von Alkoxylradikalen verstärkt Aufmerksamkeit erhalten. Ein Nachteil der Pyridinverbindungen ist ihre Tageslichtempfindlichkeit. Außerdem verhalten sich beide Moleküle sehr unterschiedlich, wenn sie in ohne die Anwesenheit effektiver Radikalfänger photolysiert werden. Die Pyridinthione reagieren unter diesen Bedingungen in sauberen und effizienten Radikalkettenreaktionen, wogegen die entsprechenden Thiazolthione unkontrollierbar mit unerwünschten Nebenreaktionen reagieren. Im Rahmen dieser Arbeit sollen die Eigenschaften beider Verbindungen verstanden und verbessert werden. Außerdem sollen neue Verbindungen vorgeschlagen werden die ebenfalls in der photochemischen Alkoxylradikalchemie eingesetzt werden können. Kapitel 2 behandelt die theoretischen Hintergründe der Erzeugung und Anwendung von Alkoxylradikalen. Elektronische Anregungen, die UV/vis Spektroskopie sowie quantenchemischer Ansätze, die in der Lage sind diese Phänomene zu berechnen, werden in Kapitel 3 dieser Arbeit beschrieben. Kapitel 4 befasst sich mit der Beschreibung der senkrechten elektronischen Anregungsspektren. Im Validierungsschritt wurden CASSCF, CASPT2, TD-DFT sowie RI-CC2 getestet wie gut sie die senkrechten elektronischen Übergänge in beiden Vorläufersystemen beschreiben. Der CASPT2 Ansatz berechnet die gemessenen elektronischen Anregungen aller Verbindungen sehr genau. Die Ergebnisse der TD-DFT Berechnungen sind sehr empfindlich bezüglich der Wahl des Funktionales und eine Validierung sollte deshalb immer durchgeführt werden. Auf der Grundlage der Berechnungen wurden die spektroskopisch aktiven Banden einem pi-->pi* Übergang in der Thiohydroxamsäure-Gruppe zugeordnet. In Kapitel 5 wird der Mechanismus der thermisch oder photochemisch induzierten N,O-Homolyse in beiden Verbindungen aufgeklärt. Die durch UV-Licht induzierte N,O-Homolyse beginnt im S2-Zustand. Die zu erwarteten Relaxation vom S2- in den S1-Zustand und die anschließende Dissoziation wird im Fall der Thiazolthion Verbindung sehr rasch verlaufen. Die Potentialflächen der Pyrridinverbindung weisen hingegen auf einen langsameren N,O Bindungsbruch hin. Wegen des schnelleren Dissoziationsprozess wird die Überschussenergie, die von der photochemischen Aktivierung der Moleküle herrührt nur zu einem kleinen Teil abgebaut. Für die Pyridinthione ist die maximal mögliche Überschussenergie der Fragmente deutlich geringer und ein Energieabbau wesentlich wahrscheinlicher. Dies erklärt die unterschiedliche gefundene Reaktivität beider Verbindungen. Für die ebenfalls erfolgreich im Experiment eingesetzten Alkoxylradikalvorläufer N-(Alkoxy)-Pyridinon weisen die berechneten Dissoziationspfade Verläufe auf, die klar auf einen relativ langsamen Bindungsbruch hindeuten. Kapitel 6 dieser Arbeit behandelt das Anpassen der Anregungswellenlänge der bekannten Pyridinthione und Thiazolthione. Im ersten Teil wurde der Effekt von Substituenten am Thiazolthion Heterocyclus erforscht. Die UV/vis Spektren von 4 und 5 substituierten Thiazolthionen können wie das Spektrum des Grundkörpers interpretiert werden. Der zweite Teil von Kapitel 6 beschreibt die Identifikation eines Substitutionsmuster am Pyridinring, das eine Blauverschiebung der photoaktiven Bande induzieren soll. Die Berechnungen zeigen, dass elektronenarme und elektronenreiche Substituenten den gleichen Einfluss auf das elektronische Anregungsspektrum haben. Die Substituenteneffekte auf die elektronischen Anregungen sind additiv allerdings muss ihre sterische Orientierung berücksichtig werden. Kapitel 7 dieser Arbeit beschreibt ein computerunterstütztes Design neuer Alkoxylradikalvorläufer. Um die Vorteile beider bekannter Verbindungen zu kombinieren, sollte die Radikalerzeugung mit Licht der Wellenlänge von ungefähr 350 nm initiiert werden, und es sollten wenige unerwünschte Nebenreaktionen während der Radikalbildung auftreten. Hierzu wurden 18 Testsysteme durch eine systematische Modifikation des Thiazolthion-Grundkörpers erhalten. Vielversprechende Vorläufersysteme wurden durch ein Screening der ersten elektronischen Anregungen aller 18 Moleküle auf TD-DFT Niveau identifiziert. Für die erhaltenen neuen, vielversprechenden Systeme wurden die N,O oder P,O Bindungsdissoziationspfade nach dem entwickelten Modell analysiert. N-(Methoxy)-Azaphospholthion und N-(Methoxy)-Pyrrolthion scheinen die vielversprechendsten neuen Kandidaten zu sein. Die Berechnungen sagen eine intensive Absorption bei ungefähr 350 nm bzw. 320 nm voraus. Anhand der maximal möglicher Überschussenergie und der N,O Bindungsdissoziationspfade, wird eine Reaktivität erwartet, die mehr dem Verhalten der Pyridinthione entsprechen sollte. KW - Photochemie KW - Alkoxylradikale KW - Theoretische Charakterisierung KW - TD-DFT KW - Photochemistry KW - Alkoxylradikals KW - theoretical characterisation KW - TD-DFT Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23815 ER - TY - THES A1 - Geiger, Lars T1 - The versatile use of Guanidiniocarbonylpyrroles : from self-assembly to peptide recognition T1 - Der vielseitige Einsatz von Guanidiniocarbonylpyrrolen: Von der Selbstassoziation bis zur Peptide-Erkennung N2 - Die vorliegende Arbeit gliedert sich in zwei Themenschwerpunkte. Ein supramolekulares Projekt beinhaltete die Entwicklung von neuen flexiblen, selbst-aggregierenden Zwitterionen als Bausteine für supramolekulare Polymere. In einem zweiten bioorganischem Teil bestand das Ziel darin, Rezeptoren für Aminosäuren und Dipeptide in Wasser zu entwickeln. Beide Projekte basieren auf dem Guanidiniocarbonylpyrrol als effizientes Bindungsmotiv für die Komplexierung von Carboxylaten in wässrigen Lösungen. Eine notwendige Voraussetzung für die Realisierung dieser Projekte war jedoch zunächst die Entwicklung einer allgemeinen, effizienten und milden Synthese für Guanidiniocarbonylpyrrole. Die bei der zuvor verwendeten Methode aggressiven Reaktionsbedingungen und die problematische Aufreinigung verhinderten eine größere Anwendung dieses Bindungsmotivs in bioorganischen und supramolekularen Projekten. Im Rahmen dieser Arbeit gelang es mir erfolgreich eine neue Syntheseroute zu entwickeln. Hierbei wurde mono-tBoc-Guanidine mit dem Benzylester mittels PyBOP gekuppelt und nach Entschützung der Benzylschutzgruppe wurde die zentrale Zwischenstufe für die weiteren Synthesen, die tBoc-geschützte Guanidinocarbonylpyrrol-Säure erhalten. Durch diese neuartige Synthese war es möglich, eine Reihe von flexiblen Zwitterionen 3-6 herzustellen und deren Selbst-Aggregation und den Einfluß der Kettenlänge und somit Flexibilität der Alkylkette auf Struktur und Stabilität der gebildeten Aggregate in Lösung sowie auch in der Gasphase zu untersuchen. In DMSO deuten NMR-Verdünnungsreihen darauf hin, dass die flexiblen Zwitterionen mit n = 1, 3 und 5 oligomere Strukturen ausbilden. Im Falle von n = 1 werden hoch stabile helicale und Nanometer große Aggregate in der gebildet. In den Gasphasen-Studien wurde die Stabilität und Zerfallskinetik einer Reihe von Natriumaddukten der Dimere von n = 2, 3 und 5 untersucht. Dieses gelang durch die Methode der „infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry“ (IRMPD-FT-ICR MS). Solche Studien ermöglichen möglicherweise in Zukunft das gezielte Design von supramolekularen Bausteinen. Der bioorganische Teil meiner Arbeit setzte sich aus drei Einzelprojekten zusammen. So synthetisierte ich durch eine fünfstufige Synthesesequenz vier neue Arginin-Analoga, die in Zukunft als Ersatz für Arginin in Peptide eingebaut werden können. Als Testreaktion für die Eignung dieser Verbindungen in einer Festphasenpeptidsynthese, wurde ein Tripetid Ala-AA1-Val (AA: Arginin-Analogon) mit einem eingebauten Arginin-Analogon erfolgreich hergestellt. In einem zweiten Projekt habe ich den Einfluß einer zusätzlichen ionischen Wechselwirkung in unserem Bindungsmotiv untersucht. Dazu wurde ein zweifach-kationischer Rezeptor und der dreifach-geladenen Rezeptor synthetisiert und physikalisch-organisch ihre Bindungseigenschaften mit Hilfe von NMR-Titrationsexperimenten gegen eine Reihe von Aminosäuren untersucht. Der dreifach-kationische Rezeptor 11 zeigte hierbei herausragende Bindungseigenschaften und war um ca. den Faktor 100 besser als für die bisher bekannten Guanidiniocarbonylpyrrole. Die Assoziationskonstanten waren auch fast reinem Wasser mit bis zu Kass = 2000 noch bemerkenswert hoch. Im dritten Projekt habe ich einen de-novo entwickelten Rezeptor für C-terminale Dipeptide in einer beta-Faltblatt Struktur entwickelt.Dieser Rezeptor wurde mittels NMR and UV-Titrationen untersucht. In 40 % Wasser/ 60 % DMSO waren die Bindungskonstanten zu hoch um überhaupt quantifiziert zu werden. Deshalb wurden die Bindungseigenschaften des Rezeptors mittels UV Titrationen in einer Mischung aus 90 % Wasser mit 10 % DMSO gegen eine Reihe von Dipeptiden und Aminosäuren getestet. Die Bindungsdaten zeigen, dass Rezeptor Dipeptide mit ausgezeichneten Bindungskonstanten (Kass > 10000 M-1) komplexiert. Im Gegensatz dazu bindet der Rezeptor 12 Aminosäuren um den Faktor zehn schlechter (Kass > 1000 M-1). Die Komplexstabilität nimmt hierbei in Abhängigkeit von der Seitenkette des Dipeptids in der Reihe Gly < Ala < Val zu, was sich mit der abnehmenden Flexibilität und zunehmenden Hydrophobizität der Seitenkette erklären lässt. Diese Eigenschaften machen den Rezeptor 12 zu dem besten bisher bekannten Dipeptidrezeptor in wässrigen Lösungen. Innerhalb meiner Arbeit gelang es mir somit, nicht nur eine essentiell wichtige, milde und effiziente Synthese für Guanidinocarbonylpyrrole zu entwickeln, sondern es gelang mir ebenso ein neues Bindungsmotiv für die Komplexierung von Aminosäuren in Wasser zu entwickeln. Zusätzlich konnte noch der Dipeptidrezeptor erfolgreich synthetisiert und untersucht werden. Mit Bindungskonstanten für von Kass > 10000 M-1 ist er der derzeit beste Dipeptidrezeptor in wässriger Lösung. N2 - The present thesis encompasses two parts. The first supramolecular part focuses on the development of new flexible self-assembling zwitterions as building blocks for supramolecular polymers. In the second part, the aim was to develop bioorganic receptors for amino acids and dipeptides in aqueous media. Both research projects are based on the guanidiniocarbonyl pyrrole 1 as a new efficient binding motif for the complexation of carboxylates in polar solution.A necessary requirement for the realization of these research projects was to develop an efficient and mild synthetic approach for the cationic guanidiniocarbonyl pyrroles in general. The harsh reaction conditions of the previously used method and the problematic purification of the cationic guanidinocarbonyl pyrroles so far prevented a more extensive exploration in bioorganic and supramolecular research. In the course of this work I successfully developed a new synthesis starting with mono tBoc-protected guanidine that was coupled with a benzyl protected pyrrole carboxylic acid. After deprotection of the benzyl group, a key intermediate in the newly developed synthesis, the tBoc-protected guanidinocarbonyl pyrrole acid, was obtained. This new, mild and extremely efficient synthetic approach for the introduction of acyl guanidines is now the standard procedure in our group for the preparation of both solution and solid-phase guanidiniocarbonyl pyrroles. With this facile method at hand, a new class of flexible zwitterions, in which a carboxylate is linked via an alkyl chain to a guanidiniocarbonyl pyrrole cation was synthesized. The self-aggregation and the influence of the length and therefore flexibility of the alkyl spacer on the structure and stability of the formed aggregates were studied in solution and gas phase. In solution the aggregation was studied by NMR-dilution experiments in DMSO which suggest that flexible zwitterions with n = 1, 3 and 5 form oligomers. For n = 1, highly stable helical aggregates with nanometer size are formed. In the gas phase studies the stability and the fragmentation kinetics of a series of sodiated dimeric zwitterions with n = 2, 3 and 5 were investigated. This was done by infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry (IRMPD-FT-ICR-MS). These kinds of studies can be used in the future for a more directed design of supramolecular building blocks The bioorganic research part comprises three different projects. In a first project I synthesized four new arginine analogues which can be implemented in peptides as a substitute for arginine. Therefore, I developed the new multi-step synthesis shown below for these arginine analogues. As a test for their application in normal solid phase synthesis, I successfully prepared a tripeptide sequence Ala-AA1-Val (AA: arginine analogue. In a second project I studied the influence of additional ionic interactions within our binding motif. I synthesized a di-cationic and a tris-cationic receptor and evaluated the binding properties via NMR titration experiments against a variety of amino acids. Especially, the tris-cationic receptor was capable to strongly complex amino acids. The association constants were about a factor of 100 higher than those for the guanidiniocarbonyl pyrroles known so far. Even in 90 %water/10 % DMSO the association constants determined by NMR titration were extremely high with values around Kass = 2000 M-1. In the third project I developed a de-novo designed receptor for C-terminal dipeptides in a beta-sheet conformation based on molecular calculations. This receptor was studied in NMR and also UV titration experiments. In 40 % water/ 60 % DMSO the association constants were too strong to be measured by NMR titration experiments. Therefore, the complexation properties of 12 were studied by UV titration in water (with 10 % DMSO added for solubility reasons) with various dipeptides and amino acids as substrates. The data show that 12 binds dipeptides very efficiently even in water with association constants Kass > 10000 M-1, making 12 one of the most effective dipeptide receptors known so far. In contrast to that, simple amino acids are bound up to ten times less efficiently (Kass > 1000 M-1) than dipeptides. In the series of dipeptides studied the complex stability increases depending on the side chains present in the order Gly < Ala < Val which is a result of the decreasing flexibility of the peptide and the increasing hydrophobicity of the side chains. The binding properties of this receptor are superior to any other dipeptide receptor reported so far. Within my thesis I have not only developed an essential, mild and efficient synthetic approach for guanidiniocarbonyl pyrroles in general, but also a new binding motif for the complexation of amino acids 15, 11 and in addition a dipeptide receptor 12 that is superior to all dipeptides receptors known so far. KW - Guanidinderivate KW - Supramolekulare Chemie KW - Selbstassoziation KW - Bioorganik KW - supramolekulare Chemie KW - molekulare Erkennung KW - Self-Assembly KW - Bioorganic chemistry KW - supramolecular chemistry KW - molecular recognition Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9272 ER - TY - JOUR A1 - Christl, Manfred A1 - Lang, R. A1 - Herzog, C. T1 - The Synthesis of Octavalene (Tricyclo[5.1.0.0\(^{2,8}\)]octa-3,5-diene) and Several Substituted Octavalenes N2 - No abstract available KW - Organische Chemie Y1 - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58254 ER - TY - JOUR A1 - Zimniak, Melissa A1 - Kirschner, Luisa A1 - Hilpert, Helen A1 - Geiger, Nina A1 - Danov, Olga A1 - Oberwinkler, Heike A1 - Steinke, Maria A1 - Sewald, Katherina A1 - Seibel, Jürgen A1 - Bodem, Jochen T1 - The serotonin reuptake inhibitor Fluoxetine inhibits SARS-CoV-2 in human lung tissue JF - Scientific Reports N2 - To circumvent time-consuming clinical trials, testing whether existing drugs are effective inhibitors of SARS-CoV-2, has led to the discovery of Remdesivir. We decided to follow this path and screened approved medications "off-label" against SARS-CoV-2. Fluoxetine inhibited SARS-CoV-2 at a concentration of 0.8 mu g/ml significantly in these screenings, and the EC50 was determined with 387 ng/ml. Furthermore, Fluoxetine reduced viral infectivity in precision-cut human lung slices showing its activity in relevant human tissue targeted in severe infections. Fluoxetine treatment resulted in a decrease in viral protein expression. Fluoxetine is a racemate consisting of both stereoisomers, while the S-form is the dominant serotonin reuptake inhibitor. We found that both isomers show similar activity on the virus, indicating that the R-form might specifically be used for SARS-CoV-2 treatment. Fluoxetine inhibited neither Rabies virus, human respiratory syncytial virus replication nor the Human Herpesvirus 8 or Herpes simplex virus type 1 gene expression, indicating that it acts virus-specific. Moreover, since it is known that Fluoxetine inhibits cytokine release, we see the role of Fluoxetine in the treatment of SARS-CoV-2 infected patients of risk groups. KW - SARS-CoV-2 KW - viral epidemiology KW - viral infection Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259820 VL - 11 ER - TY - JOUR A1 - Kleiber, Nicole A1 - Lemus-Diaz, Nicolas A1 - Stiller, Carina A1 - Heinrichs, Marleen A1 - Mong-Quyen Mai, Mandy A1 - Hackert, Philipp A1 - Richter-Dennerlein, Ricarda A1 - Höbartner, Claudia A1 - Bohnsack, Katherine E. A1 - Bohnsack, Markus T. T1 - The RNA methyltransferase METTL8 installs m\(^3\)C\(_{32}\) in mitochondrial tRNAs\(^{Thr/Ser(UCN)}\) to optimise tRNA structure and mitochondrial translation JF - Nature Communication N2 - Modified nucleotides in tRNAs are important determinants of folding, structure and function. Here we identify METTL8 as a mitochondrial matrix protein and active RNA methyltransferase responsible for installing m\(^3\)C\(_{32}\) in the human mitochondrial (mt-)tRNA\(^{Thr}\) and mt-tRNA\(^{Ser(UCN)}\). METTL8 crosslinks to the anticodon stem loop (ASL) of many mt-tRNAs in cells, raising the question of how methylation target specificity is achieved. Dissection of mttRNA recognition elements revealed U\(_{34}\)G\(_{35}\) and t\(^6\)A\(_{37}\)/(ms\(^2\))i\(^6\)A\(_{37}\), present concomitantly only in the ASLs of the two substrate mt-tRNAs, as key determinants for METTL8-mediated methylation of C\(_{32}\). Several lines of evidence demonstrate the influence of U\(_{34}\), G\(_{35}\), and the m\(^3\)C\(_{32}\) and t\(^6\)A\(_{37}\)/(ms\(^2\))i\(^6\)A\(_{37}\) modifications in mt-tRNA\(^{Thr/Ser(UCN)}\) on the structure of these mt-tRNAs. Although mt-tRNA\(^{Thr/Ser(UCN)}\) lacking METTL8-mediated m\(^3\)C\(_{32}\) are efficiently aminoacylated and associate with mitochondrial ribosomes, mitochondrial translation is mildly impaired by lack of METTL8. Together these results define the cellular targets of METTL8 and shed new light on the role of m\(^3\)C\(_{32}\) within mt-tRNAs. KW - Modified Nucleotides in tRNAs KW - METTL8 KW - Mitochondrial Matrix Protein KW - RNA Methyltransferase KW - RNA KW - Enzymes KW - Organelles Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-254592 VL - 13 ER - TY - JOUR A1 - Reuter, W. A1 - Engels, Bernd A1 - Peyerimhoff, S.D. T1 - The Reaction of Singlet and Triplet Methylen with Ethene - A Multi-Reference CI Study N2 - Large-scale multireference configuration interaction (MRD-CI) calculations in a flexible atomic orbital (AO) basis are employed to study the reaction of C\(_2\)H\(_4\) with CH\(_2\) in its firSt triplet and singlet state. The minimum energy path (MEP) of both reactions is calculated, and different mechanisms are discussed. To examine the possible participation of the singlet state in the overall reaction starting from the triplet channel and terminating in the singlet-state c-C\(_3\)H\(_6\), various cuts through both hypersurfaces are calculated. lt is found that favorable interconversion from the trip1et to the singlet surface can only occur at !arge separations of the two fragments of CH2 and C\(_2\)H\(_4\). Experimental data considering the vibrational motion of CH\(_2\) in connection with the relative position of both surfaces are used to obtain an estimate for the overall barrier of the reaction. The height of the barrier is about 6 kcal/mol, while the barrier of the pure triplet reaction is calculated to be 7-9 kcal/mol. KW - Organische Chemie Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58923 ER - TY - JOUR A1 - Engels, Bernd A1 - Peyerimhoff, S.D. T1 - The hyperfine coupling constants of the X\(^3\)Σ\(^-\) state of NH : Influence of polarization functions and configuration space on the description of spin polarization N2 - The hyperfine coupling constants for the \(^3\)Σ\(-\) ground state of the NH molecule are determined by configuration interaction calculations whereby the infl.uence of polarization functions as weil as of the configuration space on the spin polarization mechanism is analysed. The dipolar part Au(N) and Au(H) can be obtained very reliably without much computational effort (A .. (N) == -45·3 MHz and A"(H) = -62·3 MHz). The value for the isotropic contribution a1.., in the best AO basis and MRD-CI treatment is - 64·5 MHz for H and 16·6 MHz for nitrogen compared to the corresponding experimental quantities of -66 MHz and 19 MHz respectively. Their determination depends on a subtle balance of the lu, 2u and 3u shell correlation description, whereby the dominant contribution to a1..,(H) results from the 2u shell. It is shown that the often good agreement of a110 values with experiment in a small basis singledouble configuration interaction treatment results from a cancellation of two errors. KW - Organische Chemie Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58832 ER - TY - JOUR A1 - Engels, Bernd A1 - Peyerimhoff, S.D. A1 - Karna, S.P. A1 - Grein, F. T1 - The hyperfine coupling constants of the five lowest states of CH : An ab initio MRD-CI study N2 - No abstract available KW - Organische Chemie Y1 - 1988 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58807 ER - TY - JOUR A1 - Karna, S. A1 - Grein, F. A1 - Engels, Bernd A1 - Peyerimhoff, S.D. T1 - The hyperfine coupling constants of \(^{19}\)F\(_2\) N2 - The isotropic (a\(_{iso}\)) and dipolar (A\(_{dip}\)) hyperfine coupling constants of 19F2 were obtained from MRD-CI wave functions using a variety of basis sets. In series I, increasing numbers of d functions were added to a 5s4p contracted Huzinaga!Dunning basis. In series II, the 5s3p basis set was uncontracted in several steps until 9s5p was reached, to which were added from one to three d-polarization functions. Cl parameters (selectioo threshoids and the number of reference coofiguratioos) were also varied. A study of the R dependence of aiso and Adip was perfonned. The best values obtained at R\(_e\) are 260 G for a\(_{iso}\) and 308 G for A\(_{dip}\)• compared with experimental values of about 280 G for a;10 and 320 G for A\(_{dip}\)· KW - Organische Chemie Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-58817 ER - TY - JOUR A1 - Wawra, Stephan A1 - Fesel, Philipp A1 - Widmer, Heidi A1 - Timm, Malte A1 - Seibel, Jürgen A1 - Leson, Lisa A1 - Kesseler, Leona A1 - Nostadt, Robin A1 - Hilbert, Magdalena A1 - Langen, Gregor A1 - Zuccaro, Alga T1 - The fungal-specific beta-glucan-binding lectin FGB1 alters cell-wall composition and suppresses glucan-triggered immunity in plants JF - Nature Communications N2 - β-glucans are well-known modulators of the immune system in mammals but little is known about β-glucan triggered immunity in planta. Here we show by isothermal titration calorimetry, circular dichroism spectroscopy and nuclear magnetic resonance spectroscopy that the FGB1 gene from the root endophyte Piriformospora indica encodes for a secreted fungal-specific β-glucan-binding lectin with dual function. This lectin has the potential to both alter fungal cell wall composition and properties, and to efficiently suppress β-glucan-triggered immunity in different plant hosts, such as Arabidopsis, barley and Nicotiana benthamiana. Our results hint at the existence of fungal effectors that deregulate innate sensing of β-glucan in plants. KW - Effectors in plant pathology KW - Fungal host response KW - Lectins Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-165945 VL - 7 ER - TY - JOUR A1 - Müller, Diana A1 - Bessi, Irene A1 - Richter, Christian A1 - Schwalbe, Harald T1 - The Folding Landscapes of Human Telomeric RNA and DNA G‐Quadruplexes are Markedly Different JF - Angewandte Chemie International Edition N2 - We investigated the folding kinetics of G‐quadruplex (G4) structures by comparing the K\(^{+}\)‐induced folding of an RNA G4 derived from the human telomeric repeat‐containing RNA (TERRA25) with a sequence homologous DNA G4 (wtTel25) using CD spectroscopy and real‐time NMR spectroscopy. While DNA G4 folding is biphasic, reveals kinetic partitioning and involves kinetically favoured off‐pathway intermediates, RNA G4 folding is faster and monophasic. The differences in kinetics are correlated to the differences in the folded conformations of RNA vs. DNA G4s, in particular with regard to the conformation around the glycosidic torsion angle χ that uniformly adopts anti conformations for RNA G4s and both, syn and anti conformation for DNA G4s. Modified DNA G4s with \(^{19}\)F bound to C2′ in arabino configuration adopt exclusively anti conformations for χ. These fluoro‐modified DNA (antiTel25) reveal faster folding kinetics and monomorphic conformations similar to RNA G4s, suggesting the correlation between folding kinetics and pathways with differences in χ angle preferences in DNA and RNA, respectively. KW - folding landscapes KW - G-quadruplexes KW - kinetics KW - real-time NMR spectroscopy KW - TERRA RNA Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-238917 VL - 60 IS - 19 SP - 10895 EP - 10901 ER - TY - THES A1 - Henn, Julian T1 - The electron density : a bridge between exact quantum mechanics and fuzzy chemical concepts T1 - Die Elektronendichte: Eine Brücke zwischen exakter Quantenmechanik und unscharfen chemischen Konzepten N2 - Summary The nature of the chemical bond is a topic under constant debate. What is known about individual molecular properties and functional groups is often taught and rationalized by explaining Lewis structures, which, in turn, make extensive use of the valence concept. The valence concept distinguishes between electrons, which do not participate in chemical interactions (core electrons) and those, which do (single, double, triple bonds, lone-pair electrons, etc.). Additionally, individual electrons are assigned to atomic centers. The valence concept is of paramount success: It allows the successful planning of chemical syntheses and analyses, it explains the behavior of individual functional groups, and, moreover, it provides the “language” to think of and talk about molecular structure and chemical interactions. The resounding success of the valence concept may be misleading to forget its approximative character. On the other hand, quantum mechanics provide in principle a quantitative description of all chemical phenomena, but there is no discrimination between electrons in quantum mechanics. From the quantum mechanical point of view there are only indistinguishable electrons in the field of the nuclei, i.e., it is impossible to assign a given electron to a particular center or to ascribe a particular purpose to individual electrons. The concept of indistinguishability of micro particles is founded on the Heisenberg uncertainty relation, which states, that wavepackets diverge in the 6N dimensional phase space, such that individual trajectories can not be identified. Hence it is a deep-rooted and approved physical concept. As an introduction to the present work density partitioning schemes were discussed, which divide the total molecular density into chemically meaningful areas. These partitioning schemes are intimately related to either the concepts of bound atoms in a molecule (as in the Atoms In Molecules theory (AIM) according to Bader or as in the Hirshfeld partitioning scheme) or to the concept of chemical structure in the sense of Lewis structures, which divide the total molecular density into core and valence density, where the valence density is split up again into bonding and non-bonding electron densities. Examples are early and recent loge theories, the topological analysis by means of the Electron Localization Function (ELF), and the Natural Bond Orbital (NBO) approach. Of these partitioning schemes, the theories according to Bader (AIM), to Becke and Edgecomb (ELF) and according to Weinhold (NBO and Natural Resonance Theory, NRT), respectively, were reviewed in detail critically. Points of criticism were explicated for each of the mentioned theories. Since theoretically derived electron densities are to be compared to experimentally derived densities, a brief introduction into the theory of X-ray di®raction experiments was given and the multipole formalism was introduced. The procedure of density refinement was briefly discussed. Various suggestions for improvements were developed: One strategy would be the employment of model parameters, which are to a maximum degree mutually orthogonal, with the object of minimizing correlations among the model parameters, e.g., to introduce nodal planes into the radial functions of the multipole model. A further suggestion involves the guidance of the iterative refinement procedure by an extremum principle, which states, that when di®erent solutions to the least squares minimization problem are available with about the same statistical measures of quality and with about the same residual density, then the solution is to prefer, which yields a minimum density at the bond critical point (BCP) and a maximum polarity in terms of the ratio of distances between the BCP and the nuclei. This suggestion is based on the well known fact, that the bond polarity (in terms of the ratio of distances between the BCP and the respective nuclei) is underestimated in the experiment. Another suggestion for including physical constraints is the explicit consideration of the virial theorem, e.g., by evaluating the integration of the Laplacian over the entire atomic basins and comparing this value to zero and to the value obtained from the integration of the electron gradient field over the atomic surface. The next suggestion was to explicitly use the electrostatic theorem of Feynman (often also denoted as Hellmann-Feynman theorem), which states, that the forces onto the nuclei can be calculated from the purely classical electrostatic forces of the electron distribution and the nuclei distribution. For a stationary system, these forces must add to zero. This also provides an internal quality criterion of the density model. This can be performed in an iterative way during the refinement procedure or as a test of the final result. The use of the electrostatic theorem is expected to reduce significantly correlations among static density parameters and parameters describing vibrations, since it is a valuable tool to discriminate between physically reasonable and artificial static electron densities. All of these mentioned suggestions can be applied as internal quality criteria. The last suggestion is based on the idea to initiate the experimental refinement with a set of model parameters, which is, as much as possible close to the final solution. This can be achieved by performing periodic boundary conditions calculations, from which theoretically created files are obtained, which contain the Miller indices (h, k, l) and the respective intensity I. This file is used for a model parameter estimation (refinement), which excludes vibrations. The resulting parameters can be used for the experimental refinement, where, in a first step, the density parameters are fixed to determine the parameters describing vibrations. For a fine tuning, again the electrostatic theorem and the other above mentioned suggestions could be applied. Theoretical predictions should not be biased by the method of computation. Therefore the dependence of the density analyzing tools on the level of calculation (method of calculation/basis set) and on the substituents in complex chemical bonding situations were evaluated in the second part of the present work. A number of compounds containing formal single and double sulfur nitrogen bonds was investigated. For these compounds, experimental data were also available. The calculated data were compared internally and with the experimental results. The internal comparison was drawn with regard to questions of convergency as well as with regard to questions of consistency: The resulting molecular properties from NBO/NRT analyses were found to be very stable, when the geometries were optimized at the respective level of theory. This stability is valid for variations in the methods of calculation as well as for variations in the basis set. Only the individual resonance weights of the contributing Natural Lewis Structures differed considerably depending on the level of calculation and depending on the substituents. However, the deviations were in both cases to a large extent within a limit which preserves the descending order of the leading resonance structure weights. The resulting bond orders, i.e., the total, covalent and ionic bond order from NRT calculations, were not affected by the shift in the resonance weights. The analysis of the bond topological parameters resulted in a discrimination between insensitive parameters and sensitive parameters. The stable parameters do neither depend strongly on the method of calculation nor on the basis set. Only minor variation occurs in the numerical values of these parameters, when the level of calculation is changed or even when other functional groups (H, Me, or tBu) are employed, as long as the methods of calculation do not drop considerably below a standard level. The bond descriptors of the sulfur nitrogen bonds were found to be also stable with respect to the functional groups R = H, R = Me, and R = tBu. Stable parameters are the bond distance, the density at the bond critical point (BCP) and the ratio of distances between the BCP and the nuclei A and B, which varies clearly when considering the formal bond type. For very small basis sets like the 3-21G basis set, this characteristic stability collapses. The sensitive parameters are based on the second derivatives of the density with respect to the coordinates. This is in accordance with the well known fact, that the total second derivative of the density with respect to the coordinates is a strongly oscillating function with positive as well as negative values. A profound deviation has to be anticipated as a consequence of strong oscillations. lambda3, which describes the local charge depletion in the direction of the interaction line, is the most varying parameter. A detailed analysis revealed that the position of the BCP in the rampant edge of the Laplacian distribution is responsible for the sensitivity of the numerical value of lambda3 in formal double bonds. Since the slope of the Laplacian assumes very high values in its rampant edge, a tiny displacement of the BCP leads already to a considerable change in lambda3. This instability is not a failure of the underlying theory, but it yields de facto to a considerable dependence of sensitive bond topological properties on the method of calculation and on the applied basis sets. Since the total second derivative is important to judge on the nature of the bond in the AIM theory (closed shell interactions versus shared interactions), the changes in lambda3 can lead to differing chemical interpretations. The comparison of theoretically derived bond topological properties of various sulfur nitrogen bonds provides the possibility to measure the self consistency of this data set. All data sets clearly exhibit a linear correlation between the bond distances and the density at the BCP on one hand and between the bond distances and the Laplacian values at the BCP on the other hand. These correlations were almost independent of the basis set size. In this context, the linear regression has to be regarded exclusively as a descriptive statistics tool. There is no correlation anticipated a priori. The formal bond type was found to be readily deducible from the theoretically obtained bond topological descriptors of the model systems. In this sense, the bond topological properties are self consistent despite of the numerical sensitivity of the derivatives, as exemplified above. Often, calculations are performed with the experimentally derived equilibrium geometries and not with optimized ones. Applying this approach, the computationally costly geometry optimizations are saved. Following this approach the bond topological properties were calculated using very flexible basis sets and employing the fixed experimental geometry (which, of course, includes the application of tBu groups). Regression coe±cients similar to those from optimized geometries were obtained for correlations between bond distances and the densities at the BCP as well as for the correlation between bond distances and the Laplacian at the BCP, i.e. the approach is valid. However, the data points scattered less and the coe±cient of correlation was clearly increased when geometry optimizations were performed beforehand. The comparison between data obtained from theory and experiment revealed fundamental discrepancies: In the data set of bond topological parameters from the experiment, the behavior of only 2 out of 3 insensitive parameters was comparable to the behavior of the theoretically obtained values, i.e. theoretical and experimental bond distances as well as theoretical and experimental densities at the BCP correlate. From the theoretically obtained data it was easy to deduce the formal bond type from the position of the BCP, since it changed in a systematic manner. The respective experimentally obtained values were almost constant and did not change systematically. For the SN bonds containing compounds, the total second derivative assumes exclusively negative values in the experiment. Due to the different internal behavior, experimentally and theoretically sensitive bond topological values could not be compared directly. The qualitative agreement in the Laplacian distribution, however, was excellent. In the third and last part of this work, the application to chemical systems follows. Formal hypervalent molecules, i.e. molecules where some atoms are considered to hold more than 8 electrons in their valence shell, were investigated. These were compounds containing sulfur nitrogen bonds (H(NtBu)2SMe, H2C{S(NtBu)2(NHtBu)}2, S(NtBu)2 and S(NtBu)3) and a highly coordinated silicon compound. The set of sulfur nitrogen compounds also contained a textbook example for valence expansion, the sulfur triimide. For these molecules, experimental reference values were available from high resolution X-ray experiments. The experimental results were in the case of the sulfur triimide not unique. Furthermore, from the experimental bond topological data no definite conclusion about the formal bonding type could be drawn. The situation of sulfur nitrogen bonds in the above mentioned set of molecules was analyzed in terms of a geometry discussion and by means of a topological analysis. The methyl-substituted isolated molecules served as model compounds. For the interpretation of the bonding situation additional NBO/NRT calculations were preformed for the sulfur nitrogen compounds and an ELF calculation and analysis was performed for the silicon compound. The ELF analysis included not only the presentation and discussion of the ELF-isosurfaces (eta = 0.85), but also the investigation of populations of disynaptic valence basins and the percentage contributions to these populations of the individual atoms when the disynaptic valence basins are split into atomic contributions according to Bader’s partitioning scheme. The question of chemical interest was whether hypervalency is present in the set of molecules or not. In the first case the octet rule would be violated, in the second case Pauling’s verdict would be violated. While the concept of hypervalency is well established in chemistry, the violation of Pauling’s verdict is not. The quantitative numbers of the sensitive bond topological values from theory and experiment were not comparable, since no systematic relationship between the experimentally and theoretically determined sensitive bond descriptors was found. However, the insensitive parameters are in good agreement and the qualitative Laplacian distribution is, with few exceptions, in excellent agreement. The formal bonding type was deduced from experimental and theoretical topological data by considering the number and shape of valence shell charge concentrations in proximity to the sulfur and nitrogen centers. The results from NBO/NRT calculations confirmed the findings. All employed density analyzing tools AIM, ELF and NBO/NRT coincided in describing the bonding situation in the formally hypervalent molecules as highly polar. A comparison and analysis of experimentally and theoretically derived electron densities led consistently to the result, that regarding this set of molecules, hypervalency has to be excluded unequivocally. N2 - Zusammenfassung Die Natur der chemischen Bindung ist ein viel und häufig auch sehr kontrovers diskutiertes Thema. In der Chemie werden Moleküleigenschaften und Eigenschaften funktionaler Gruppen oft anhand von Lewis-Strukturen rationalisiert. Lewis-Strukturen bauen auf dem Valenzkonzept auf, welches besagt, dass man zwischen Elektronen unterscheiden kann, die an chemischen Reaktionen nicht teilnehmen (Kernelektronen) und solchen, die sich z.B. als bindende Elektronen oder als nicht-bindende Elektronen an chemischen Prozessen beteiligen. Zusätzlich ermöglicht das Valenzkonzept die Zuordnung individueller Elektronen zu einzelnen atomaren Zentren im Molekül. Das Valenzkonzept ist sehr erfolgreich und überaus praktisch. Es erlaubt die zuverlässige Planung von chemischen Synthesen und Analysen, mit ihm lässt sich das charakteristische Verhalten funktioneller Gruppen erkl¨ ären. Das Valenzkonzept stellt eine Sprache bereit, in der es sich sehr gut über Molekülstrukturen und chemische Wechselwirkungen nachdenken und kommunizieren lässt. Der überwältigende Erfolg des Valenzkonzepts kann irrtümlich dazu verleiten dessen approximativen Charakter zu vergessen. In der Quantenmechanik hingegen, die eine physikalische Grundlage aller chemischen Prozesse darstellt und die im Prinzip alle chemischen Phänomene quantitativ beschreiben kann, gibt es keine Unterscheidungsmöglichkeit der Elektronen. Im Gegensatz zum Valenzkonzept geht die Quantenmechanik von ununterscheidbaren Elektronen aus, die sich im Feld der Kerne bewegen. Das bedeutet, dass es quantenmechanisch unmöglich ist individuelle Elektronen einzelnen Zentren oder bestimmten Aufgaben zuzuordnen. Die Ununterscheidbarkeit von Mikroteilchen beruht letztendlich auf der Heisenbergschen Unschärferelation, die besagt, dass Wellenpakete in einem 6N-dimensionalen Phasenraum (3N Ortskoordinaten und 3N Impulskoordinaten von N Teilchen) auseinanderlaufen, so dass im Gegensatz zur klassischen Mechanik keine Teilchen anhand ihrer individuellen Bahnen verfolgt und identifiziert werden k¨onnen. Im einleitenden ersten Teil der vorliegenden Arbeit wurden Analysemethoden vorgestellt, die die Partitionierung einer Gesamtelektronendichte in chemisch relevante Bereiche erlauben. Sie sind eng verknüpft entweder mit dem Konzept des im Molekül gebundenen Atoms (Baders Atoms in Molecules, AIM und Hirshfelds Partitionierungsschema) oder mit dem Konzept der chemischen Struktur im Sinne von Lewis-Strukturen, in denen die Gesamtdichte in Kern- und Valenzdichte unterteilt ist und diese wiederum in Bindungselektronendichte und nicht-bindende Elektronendichte. Beispiele hierfür sind frühe und auch aktuelle "Loge" Theorien, die topologische Analyse der Electron Localization Function (ELF) und die Natural Bond Orbital (NBO) Analyse. Aus den vorgestellten Partitionierungsschemata wurden die Theorien von Bader (AIM), Becke und Edgecomb (ELF) und Weinhold (NBO und Natural Resonance Theory, NRT) detaillierter vorgestellt und Kritikpunkte erläutert. Da in der vorliegenden Arbeit berechnete Elektronendichten mit experimentell bestimmten Elektonendichten verglichen werden, wurde eine kurze Einführung in Röntgenbeugungsexperimente und in das Multipolmodell gegeben. Es folgte eine kurze Beschreibung der Dichteverfeinerung und einige Verbesserungsorschläge: Eine mögliche Strategie mit dem Ziel, Korrleationen zwischen den Modellparametern zu minimieren, ist die Verwendung von Modellparametern, die zu einem maximalen Grade wechselseitig orthogonal sind. Ein Beispiel hierfür sind die Radialfunktionen des Multipolmodells, die zu einem erheblichen Teil denselben Raumbereich beschreiben, da sie keine Knotenflächen aufweisen. Mit der Einführung von Knortenflächen werden Korrelationen zwischen einzelnen Multipolpopulationen und Skalierungsfaktoren, sowie zwischen Schwingungen beschreibenden Parametern und Parametern, die die statische Elektronendichteverteilung beschreiben verringert. Ein weiterer Vorschlag beruht auf der Anwendung eines Extremalprinzips. Dieses tritt in Kraft, wenn es zu dem Kleinst-Quadrate Minimierungsproblem verschiedene Lösungen gibt, die sich anhand ihrer statistischen Gütemaße und ihrer Residualdichten nicht wesentlich unterscheiden. Das Extremalprinzip besagt, dass diejenige Lösung zu bevorzugen ist, die die kleinsten Dichtewerte am bindungskritischen Punkt ausfweist und die zugleich am stärksten polar ist. Die Polarität der Bindung wird in diesem Zusammenhang durch das Verhältnis der Abstände vom bindungskritschen Punkt zu den Kernorten ausgedrückt. Dieser Vorschlag beruht auf der bekannten Tatsache, dass experimentelle Ergebnisse eine Tendenz zum Unterschätzen der Bindungspolarität aufweisen. Eine weitere Möglichkeit zur Berücksichtigung physikalischer Randbedingungen ist die explizite Einbindung des Virialtheorems, d.h., die Integration der zweiten Ortsableitung über das atomare Bassin und die Integration des Elektronendichtegradienten auf der das Bader-Atom begrenzenden Fläche müssen beide identisch verschwinden. Die Abweichung voneinander und vom Wert Null kann als internes Gütekriterium des Dichtemodells dienen. Ein weiterer Vorschlag involviert das elektrostatische Theorem von Feynman, das oft auch Hellmann-Feynman Theorem genannt wird. Es besagt, dass die elektrostatischen Kräfte, die auf die Kerne im Molekül wirken ganz einfach klassisch berechnet werden dürfen und für eine stabile Born-Oppenheimer-Konfiguration der Kerne identisch verschwinden. Hiermit ergibt sich eine einfache Möglichkeit, eine gegebene statische Kern- und Elektronendichteverteilung auf ihre physikalische Plausibilität hin zu untersuchen. Dies kann iterativ im Verfeinerungsprozess geschehen oder als Test des finalen Modells. Darüberhinaus darf man von der Verwendung des elektrostatischen Theorems eine weitgehende Entkopplung von dichte- und schwingungsbeschreibenden Parametern erwarten, da im elektrostatischen Theorem statische Gleichgewichtsverteilungen vorausgesetzt wurden. Weiterhin könnten als Startwerte für die experimentelle Verfeinerung Modellparameter verwendet werden, die schon so nah wie möglich an der Lösung des Kleinst-Quadrate Problems liegen. Das wird erreicht, indem mit Berechnungen, die periodische Randbedingungen berücksichtigen, ein h, k, l, I-File erzeugt wird (also Reflexindizierung und Intensitäten), welches als Grundlage einer konventionellen hochauflösenden Verfeinerung verwendet wird. Der Vorteil dieses Files ist, dass es weder von Schwingungen noch von Rauschen berührt wird. Die resultierenden Modellparameter werden dann zur Verfeinerung eines Modells aufgrund der experimentellen h, k, l, I-Daten verwendet, wobei im ersten Schritt nur schwingungsbeschreibende Terme verfeinert werden. Wenn das Ergebnis noch nicht zufriedenstellend ist, können die oben genannten Verbesserungsvorschläge zur Feinabstimmung herangezogen werden. Im zweiten Teil der Arbeit wurde im Rahmen einer Evaluierungstudie die Methoden-, Basissatz-, und Substituentenabhängigkeit ausgewählter Analysewerkzeuge in der Beschreibung komplexer chemischer Bindungen untersucht. Als Testsysteme dienten eine Reihe von Schwefel Sticksto®verbindungen mit formalen Einfach- und Doppelbindungen, die zudem inter- und intramolekulare Wasserstoffbrückenbindungen ausbilden. Für diese Testsysteme liegen experimentelle Vergleichswerte vor. Die berechneten Daten wurden sowohl miteinander als auch mit den experimentell bestimmten Werten verglichen. Der interne Vergleich wurde sowohl im Hinblick auf Konvergenz- als auch auf Konsistenzfragen gezogen. Die berechneten Eigenschaften aus der NBO/NRT Analyse sind für auf dem jeweiligen Berechnungsniveau optimierte Molekülgeometrien generell sehr stabil, sowohl was die Basissatz- als auch die Methodenabhängigkeit betrifft. Eine Ausnahme sind die Resonanzgewichte der natürlichen Lewis-Strukturen aus NRT Rechnungen. Die numerischen Werte der Resonanzstrukturen zeigten zum Teil erheblich unterschiedliche Werte. Die Schwankungen sind jedoch weitgehend innerhalb der Grenze, die eine Vertauschung in der Reihenfolge der führenden Gewichte ausschließt. Die Bindungseigenschaften, wie z.B. die totale, kovalente und ionische Bindungsordnung sind von den Gewichtungsunterschieden nicht betroffen. Die Analyse der bindungstopologischen Daten führte zu einer Unterscheidung zwischen stabilen und sensitiven Parametern. Die stabilen Parameter sind in erster Näherung methoden- und basissatzunempfindlich. Sie variieren wenig, wenn Basissätze und Rechenmethoden gewechselt werden oder wenn bei der Berechnung unterschiedliche Substituenten verwendet werden, solange die verwendeten Methoden ein Standard-Niveau nicht unterscheiden. Mit Bezug auf die verschiedenen Substituenten R = H, Me und R = tBu haben sich die die Schwefel Stickstoffbindungen beschreibenden Parameter als unempfindlich herausgestellt. Die stabilen Parameter sind die Bindungslänge, die Dichte am bindungskritischen Punkt und das Verh¨altnis der Abstände des bindungskritischen Punktes zu den Kernen A und B der Bindungspartner, welche auffällig mit dem formalen Bindungstyp korrelieren. Für sehr kleine Basissätze, wie z.B. den 3-21G Basissatz, ist die Stabilität der Abstandsverhältnisse nicht mehr gegeben. Die sensitiven Parameter beruhen auf der zweiten Ortsableitung. Dies ist im Einklang mit der Tatsache, dass die zweite Ortsableitung eine stark oszillierende Funktion ist, weswegen für die zweite Ortsableitung größere numerische Schwankungen zu erwarten sind. Der am stärksten veränderliche Parameter ist lambda3. Eine genaue Analyse ergab, dass die Sensitivität von lambda3 in formalen Doppelbindungen auf die Lage des bindungskritischen Punktes in einer steilen Flanke der zweiten Ortsableitung zurückzuführen ist. Da die Steigung des Laplacewertes in der Flanke sehr groß wird, genügt schon eine winzige Verschiebung des bindungskritischen Punktes, um erhebliche Veränderungen im Wert von lambda3 herbeizuführen. Diese Instabilität darf nicht zu Kritik an der Theorie führen, jedoch verursacht sie de facto eine erhebliche Methoden- und Basissatzabhängigkeit der sensitiven topologischen Parameter. Da innerhalb der AIM-Theorie das Vorzeichen des Laplacewertes am bindungskritischen Punkt über die Natur der chemischen Wechselwirkung entscheidet (“closed-shell interactions” versus “shared interactions”) kann diese Interpretation sich von einem Berechnungsniveau zum anderen unterscheiden. Der Vergleich bindungstopologischer Daten von unterschiedlichen Schwefel Stickstoffbindungen, bietet die Möglichkeit zur Überprüfung der Konsistenz des Datensatzes. Die Datensätze zeigen eine lineare Korrelation zwischen den Bindungslängen und der jeweiligen Dichte am bindungskritischen Punkt sowie zwischen den Bindungslängen und der totalen zweiten Ableitung am bindungskritischen Punkt, nahezu unabhängig von der Güte der verwendeten Basissätze. Die lineare Regression ist hierbei lediglich als einfachste Anwendung deskriptiver Statistik zu betrachten und beinhaltet keine Modellbildung. Die bindungstopologischen Daten aus den Modellrechnungen lassen im Allgemeinen auf den zugrundeliegenden formalen Bindungstyp schließen. Es wurde festgestellt, dass die bindungstopologischen Daten aus den Modellrechnungen in diesem Sinne konsistent sind, trotz der oben genannten numerischen Instabilitäten der zweiten Ortsableitungen. In der Fachliteratur wird oft von Rechnungen berichtet, die mit der festgehaltenen experimentellen Gleichgewichtsgeometrie durchgef¨uhrt wurden, woduch die aufwendige Geometrioptimierung umgangen werden kann. Dieser Annäherung folgend, wurden die bindungstopologischen Eigenschaften der Schwefel Stickstoffverbindungen unter Benutzung von sehr flexiblen Basissätzen und bei festgehaltener experimenteller Geometrie berechnet. Die Regressionskoeffizienten betreffend die Korrelation zwischen Bindungsabstand und Dichte am b indungskritischen Punkt (BCP) sowie zwischen Bindungsabstand und Laplacewert am BCP waren denen von optimierten Geometrien sehr ähnlich, was die oben eingeführte Näherung rechtfertigt. Allerdings waren die Korrelationskoe±zienten bei gleichem Basissatz und bei gleicher Rechenmethode im Fall von zuvor optimierten Geometrien deutlich erhöht. Der Vergleich der Theoriewerte mit den experimentell erhaltenen Daten zeigt wesentliche Unterschiede zwischen beiden auf: Von den 3 stabilen Parametern aus der Analyse der theoretisch bestimmten Bindungscharakteristika erscheinen nur 2 auch in den experimentellen Daten als stabil, d.h., die theoretischen und experimentellen Bindungsabstände sowie die theoretischen und experimentellen Dichten am bindungskritischen Punkt korrelieren jeweils miteinander. Aus den theoretischen Daten (Verhältnis der Bindungspfadlängen vom bindungskritischen Punkt zu den Kernen der Bindungspartner) ließ sich der formale Bindungstyp leicht erschließen, während die entsprechenden Werte in den experimentell erhaltenen Daten keinen Rückschluss auf den formalen Bindungstyp erlaubten, da sie sich nicht systematisch änderten. Die totale zweite Ortsableitung der Dichte nimmt in den experimentellen Daten der Schwefel Stickstoffverbindungen ausschließlich negative Werte an. Durch diesen Unterschied im internen Verhalten der sensitiven Parameter am BCP konnte kein systematischer Zusammenhang zwischen diesen experimentell und theoretisch erhaltenen Werten gefunden werden. Die qualitative Übereinstimmung in der Verteilung der Laplacewerte war jedoch exzellent. Im dritten Teil der vorliegenden Arbeit folgen die Anwendungen auf chemische Fragestellungen. Es wurden formal hypervalente Moleküle, d.h.Verbindungen, in welchen manche Atome formal von mehr als 8 Valenzelektronen umgeben sind, untersucht. Es handelt sich um eine Reihe von Schwefel Sticksto®verbindungen (H(NtBu)2SMe, H2C{S(NtBu)2(NHtBu)}2, S(NtBu)2 und S(NtBu)3) und um eine Siliziumverbindung mit 6-fach koordiniertem Si. Unter den untersuchten Schwefel Stickstoffverbindungen ist auch ein Lehrbuchbeispiel für Valenzaufweitung, das Schwefeltriimid. Für diese Verbindungen lagen experimentelle Daten aus einer hochauflösenden Multipolverfeinerung vor. Der experimentelle Befund war besonders im Hinblick auf das Schwefeltriimid nicht eindeutig. Weiterhin konnte, wie bereits oben erwähnt von den bindungstopologischen Daten nicht auf den zugrundeliegenden formalen Bindungstyp geschlossen werden. Die Bindungssituation der interessierenden Schwefel Stickstoffbindungen wurde zunächst anhand der Geometrie und dann aufgrund der topologischen Eigenschaften der Elektronendichte diskutiert. Die methylsubstituierten isolierten Moleküle dienten dabei als Modell. Zur Interpretation der SN Bindungssituation wurden zusätzlich NBO/NRT Berechnungen durchgeführt und für die hochkoordinierte Siliziumverbindung wurden zusätzlich ELF Berechnungen angewendet. Die ELF Analyse umfasste nicht nur die Berechnung und Darstellung von ELF-Isofl ächen (eta = 0.85), sondern auch die Berechnung und Aufteilung der Elektronenpopulation der disynaptischen Valenzbassins, wobei zur Aufteilung das Partitionierungsschema von Bader verwendet wurde. Die chemisch relevante Fragestellung war dabei ob bei den betrachteten Molekülen Hypervalenz vorliegt oder nicht. Im Falle vorliegender Hypervalenz wäre die Oktettregel verletzt, wenn keine Hypervalenz vorliegen würde müssten formale Ladungen eingeführt werden, was eine Verletzung des Verdiktes von Pauling darstellt. Wie oben beschrieben, konnten die empfindlichen bindungstopologischen Werte von Theorie und Experiment nicht direkt miteinander verglichen werden, da kein systematischer Zusammenhang zwischen ihnen zu bestehen scheint. Die unempfindlichen Parameter waren jedoch in guter Übereinstimmung und die qualitative Laplaceverteilung in den meisten Fällen exzellent. Der formale Bindungstyp wurde aus den experimentell und theoretisch zugänglichen Daten abgeleitet, indem die Anzahl und Lage der Valenzschalen-Ladungskonzentrationen (Valence shell charge concentrations, VSCC) in der Umgebung der Schwefel und Stickstoffkerne beschrieben und verglichen wurde. Die Berechnungen an den Modellsystemen bekräftigten den Befund. Alle Methoden, die zur Analyse der Dichte herangezogen wurden, namentlich die AIM Theorie, die ELF Analyse, die NBO und die NRT Berechnungen führten übereinstimmend zu dem Ergebnis, dass die betreffenenden Bindungen als zu einem hohen Grad polar zu beschreiben sind. Der Vergleich und die Analyse von theoretischen und experimentellen Dichten führte damit gleichermaßen zu dem Ergebnis, dass Hypervalenz in dem betrachteten Satz von Molekülen definitiv ausgeschlossen werden muss. KW - Elektronendichtebestimmung KW - Vergleich KW - Chemische Bindung KW - Theorie KW - Elektronendichte KW - topologische Analyse KW - Dichtebestimmung in Theorie und Experiment KW - Electron density KW - topological analysis KW - experimental and theoretical determination of electron density Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9003 ER - TY - JOUR A1 - Griesbeck, Stefanie A1 - Michail, Evripidis A1 - Rauch, Florian A1 - Ogasawara, Hiroaki A1 - Wang, Chenguang A1 - Sato, Yoshikatsu A1 - Edkins, Robert M. A1 - Zhang, Zuolun A1 - Taki, Masayasu A1 - Lambert, Christoph A1 - Yamaguchi, Shigehiro A1 - Marder, Todd B. T1 - The Effect of Branching on the One‐ and Two‐Photon Absorption, Cell Viability, and Localization of Cationic Triarylborane Chromophores with Dipolar versus Octupolar Charge Distributions for Cellular Imaging JF - Chemistry – A European Journal N2 - Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two‐photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two‐photon excited fluorescence (TPEF) live‐cell imaging. KW - boranes KW - cell imaging KW - fluorescence KW - lysosome KW - two-photon excited fluorescence Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212887 VL - 25 IS - 57 SP - 13164 EP - 13175 ER - TY - JOUR A1 - Griesbeck, Stefanie A1 - Michail, Evripidis A1 - Rauch, Florian A1 - Ogasawara, Hiroaki A1 - Wang, Chenguang A1 - Sato, Yoshikatsu A1 - Edkins, Robert M. A1 - Zhang, Zuolun A1 - Taki, Masayasu A1 - Lambert, Christoph A1 - Yamaguchi, Shigehiro A1 - Marder, Todd B. T1 - The Effect of Branching on One- and Two-Photon Absorption, Cell Viability and Localization of Cationic Triarylborane Chromophores with Dipolar versus Octupolar Charge Distributions for Cellular Imaging JF - Chemistry - A European Journal N2 - Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two‐photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two‐photon excited fluorescence (TPEF) live‐cell imaging. KW - boranes KW - cell imaging KW - fluerescence KW - lysosome KW - two-photon excited fluorescence Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204829 VL - 25 IS - 57 ER - TY - THES A1 - Kraus, Michael T1 - The Conversion of Bifidobacterium adolescentis Sucrose Phosphorylase into a Polyphenol Transglucosidase via Structure-based Enzyme Engineering T1 - Umwandlung einer Sacharose Phosphorylase in eine Polyphenol Transglukosidase durch strukturbasiertes Enzyme Engineering N2 - The initial goal was the conversion of Bifidobacterium adolescentis Sucrose Phosphorylase (BaSP) into a polyphenol glucosidase by structure based enzyme engineering. BaSP was chosen because of its ability to utilize sucrose, an economically viable and sustainable donor substrate, and transfer the glucosyl moiety to various acceptor substrates. The introduction of aromatic residues into the active site was considered a viable way to render it more suitable for aromatic acceptor compounds by reducing its polarity and potentially introducing π-π-interactions with the polyphenols. An investigation of the active site revealed Gln345 as a suitable mutagenesis target. As a proof of concept BaSP Q345F was employed in the glycosylation of (+)-catechin, (-)-epicatechin and resveratrol. The variant was selective for the aromatic acceptor substrates and the glucose disaccharide side reaction was only observed after almost quantitative conversion of the aromatic substrates. A crystal structure of BaSP Q345F in complex with glucose was obtained and it displayed an unexpected shift of an entire domain by 3.3 Å. A crystal structure of BaSP D192N-Q345F, an inactive variant in complex with resveratrol-3-α-D-glucosid, the glucosylation product of resveratrol, synthesized by BaSP Q345F was solved. It proved that the domain shift is in fact responsible for the ability of the variant to glycosylate aromatic compounds. Simultaneously a ligand free crystal structure of BaSP Q345F disproved an induced fit effect as the cause of the domain shift. The missing link, a crystal structure of BaSP Q345F in the F-conformation is obtained. This does not feature the domain shift, but is in outstanding agreement with the wildtype structure. The domain shift is therefore not static but rather a step in a dynamic process. It is further conceivable that the domain shifted conformation of BaSP Q345F resembles the open conformation of the wild type and that an adjustment of a conformational equilibrium as a result of the Q345F point mutation is observed. An investigation into the background reaction, the formation of glucose-glucose disaccharides of BaSP Q345F and three further variants that addressed the same region (L341C, D316C-L341C and D316C-N340C) revealed the formation of nigerose by BaSP Q345F. N2 - Saccharose Phosphorylase aus Bifidobacterium adolescentis (BaSP) sollte durch strukturbasiertes Enzym-Engineering in die Lage versetzt werden Polyphenole zu glukosylieren. In die katalytische Tasche sollten aromatische Seitenketten eingeführt werden um die Polarität an jene der gewünschten Akzeptorsubstrate anzupassen und eine weitere Stabilisierung durch π-π-Wechselwirkungen zwischen Enzym und Substrat zu erlauben. BaSP Q345F war in der Lage die Zielsubstrate zu glukosylieren und behielt gleichzeitig ausreichen Aktivität bei. Die weitere Untersuchung dieses Enzyms ist in vier Studien beschrieben. Die Kristallstruktur einer inaktiven Variante, BaSP D192Q-Q345F in komplex mit dem Glukosylierungsprodukt Resveratrol-3-α-D-Glukosid wurde gelöst. Dadurch konnte gezeigt werden, dass einer Verschiebung einer Domäne für die Fähigkeit der Variante Glukose auf aromatische Substrate zu übertragen, verantwortlich ist. Die Orientierung des π-Systems von Resveratrol erlaubt weiterhin T-förmige π-π-Wechselwirkungen mit Phe156 und Phe345.Die detaillierte kinetische Untersuchung von BaSP Q345F mit acht Akzeptorsubstraten ergab eine starke Affinität der Variante zu den aromatischen Substraten (KM 0.08 bis 1.55 mM). Weitere Strukturdaten zeigen, dass die Verschiebung der Domäne Teil eines dynamischen Prozesses ist. Des weiteren ist die Q345F Variante in der Lage, den seltenen Zucker Nigerose zu synthetisisern. KW - enzyme engineering KW - sucrose phosphorylase KW - domain shift KW - resveratrol KW - quercetin KW - Phosphorylase KW - Glucosyltransferasen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192477 ER - TY - THES A1 - Hügel, Markus T1 - The control of nanomorphology in star-shaped mesogens T1 - Die Steuerung der Nanomorphologie von sternförmigen Mesogenen N2 - Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined. N2 - Auf Stilben basierende sternförmige Mesogene wurden mit als auch ohne Fullerengäste synthetisiert. Die thermotropen Eigenschaften und der Mechanismus der Raumfüllung in den Mesophasen dieser Systeme wurden untersucht. KW - Flüssigkristall KW - Fullerene KW - Porphyrin KW - Mesogen KW - Raumfüllung KW - Dyade KW - Nanosegregation KW - Fulleren-Netzwerk KW - Mesogen KW - Space filling KW - Dyad KW - Nanosegregation KW - fullerene network KW - Hekate Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-165321 ER - TY - JOUR A1 - Rushdi, Mohammed I. A1 - Abdel-Rahman, Iman A. M. A1 - Attia, Eman Zekry A1 - Saber, Hani A1 - Saber, Abdullah A. A1 - Bringmann, Gerhard A1 - Abdelmohsen, Usama Ramadan T1 - The biodiversity of the genus Dictyota: phytochemical and pharmacological natural products prospectives JF - Molecules N2 - Although a broad variety of classes of bioactive compounds have already been isolated from seaweeds of the genus Dictyota, most different species are still chemically and biologically unexplored. Dictyota species are well-known brown seaweeds belonging to the Dictyotaceae (Phaeophyta). The phytochemical composition within the genus Dictyota has recently received considerable interest, and a vast array of components, including diterpenes, sesquiterepenes, sterols, amino acids, as well as saturated and polyunsaturated fatty acids, have been characterized. The contribution of these valued metabolites to the biological potential, which includes anti-proliferative, anti-microbial, antiviral, antioxidant, anti-inflammatory, and anti-hyperpigmentation activities, of the genus Dictyota has also been explored. Therefore, this is the most comprehensive review, focusing on the published literature relevant to the chemically and pharmacologically diverse biopharmaceuticals isolated from different species of the genus Dictyota during the period from 1976 to now. KW - Phaeophyceae KW - Dictyotaceae KW - marine macroalgae KW - brown seaweeds KW - natural products KW - bioactivities KW - Dictyota Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-302428 SN - 1420-3049 VL - 27 IS - 3 ER - TY - JOUR A1 - Geiger, Nina A1 - Kersting, Louise A1 - Schlegel, Jan A1 - Stelz, Linda A1 - Fähr, Sofie A1 - Diesendorf, Viktoria A1 - Roll, Valeria A1 - Sostmann, Marie A1 - König, Eva-Maria A1 - Reinhard, Sebastian A1 - Brenner, Daniela A1 - Schneider-Schaulies, Sibylle A1 - Sauer, Markus A1 - Seibel, Jürgen A1 - Bodem, Jochen T1 - The acid ceramidase is a SARS-CoV-2 host factor JF - Cells N2 - SARS-CoV-2 variants such as the delta or omicron variants, with higher transmission rates, accelerated the global COVID-19 pandemic. Thus, novel therapeutic strategies need to be deployed. The inhibition of acid sphingomyelinase (ASM), interfering with viral entry by fluoxetine was reported. Here, we described the acid ceramidase as an additional target of fluoxetine. To discover these effects, we synthesized an ASM-independent fluoxetine derivative, AKS466. High-resolution SARS-CoV-2–RNA FISH and RTqPCR analyses demonstrate that AKS466 down-regulates viral gene expression. It is shown that SARS-CoV-2 deacidifies the lysosomal pH using the ORF3 protein. However, treatment with AKS488 or fluoxetine lowers the lysosomal pH. Our biochemical results show that AKS466 localizes to the endo-lysosomal replication compartments of infected cells, and demonstrate the enrichment of the viral genomic, minus-stranded RNA and mRNAs there. Both fluoxetine and AKS466 inhibit the acid ceramidase activity, cause endo-lysosomal ceramide elevation, and interfere with viral replication. Furthermore, Ceranib-2, a specific acid ceramidase inhibitor, reduces SARS-CoV-2 replication and, most importantly, the exogenous supplementation of C6-ceramide interferes with viral replication. These results support the hypotheses that the acid ceramidase is a SARS-CoV-2 host factor. KW - SARS-CoV-2 KW - ceramides KW - ceramidase KW - fluoxetine KW - acid sphingomyelinase Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-286105 SN - 2073-4409 VL - 11 IS - 16 ER - TY - JOUR A1 - Christl, Manfred A1 - Leininger, Hartmut A1 - Mattauch, Brigitte T1 - The 13C NMR Spectra of Some Tricyclo[2.2.0.02,6]hexane Derivatives : Unexpected High Field Absorptions Due to Additive gamma-anti Subsituent Effects N2 - By means of the BC NMR spectra of tricyclo{2.2.0~rfJ6Jhexane and thirteen of its derivatives the effects of substituents in endo-3- and endo-5-positions on the HC chemical shifts have been determined. The y-anti effects are at least as Jarge as in monosubstituted cyc1obutanes, where the shielding values of second-row hetero substituents exceed those in unstrained systems by far, and higher-row and carbon substituents still cause substantial upfield shifts. In the title system the y-anti effect of a substituent in the endo-3- and endo-5-position are operative additively, and thus shift the absorption of C-J upfieJd by a maximum of 27 ppm with respect to the unsubstituted hydrocarbon. Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-41620 SN - x ER - TY - JOUR A1 - Abdelhameed, Reda F. A. A1 - Habib, Eman S. A1 - Goda, Marwa S. A1 - Fahim, John Refaat A1 - Hassanean, Hashem A. A1 - Eltamany, Enas E. A1 - Ibrahim, Amany K. A1 - AboulMagd, Asmaa M. A1 - Fayez, Shaimaa A1 - Abd El-kader, Adel M. A1 - Al-Warhi, Tarfah A1 - Bringmann, Gerhard A1 - Ahmed, Safwat A. A1 - Abdelmohsen, Usama Ramadan T1 - Thalassosterol, a New Cytotoxic Aromatase Inhibitor Ergosterol Derivative from the Red Sea Seagrass Thalassodendron ciliatum JF - Marine Drugs N2 - Thalassodendron ciliatum (Forssk.) Den Hartog is a seagrass belonging to the plant family Cymodoceaceae with ubiquitous phytoconstituents and important pharmacological potential, including antioxidant, antiviral, and cytotoxic activities. In this work, a new ergosterol derivative named thalassosterol (1) was isolated from the methanolic extract of T. ciliatum growing in the Red Sea, along with two known first-reported sterols, namely ergosterol (2) and stigmasterol (3), using different chromatographic techniques. The structure of the new compound was established based on 1D and 2D NMR spectroscopy and high-resolution mass spectrometry (HR-MS) and by comparison with the literature data. The new ergosterol derivative showed significant in vitro antiproliferative potential against the human cervical cancer cell line (HeLa) and human breast cancer (MCF-7) cell lines, with IC\(_{50}\) values of 8.12 and 14.24 µM, respectively. In addition, docking studies on the new sterol 1 explained the possible binding interactions with an aromatase enzyme; this inhibition is beneficial in both cervical and breast cancer therapy. A metabolic analysis of the crude extract of T. ciliatum using liquid chromatography combined with high-resolution electrospray ionization mass spectrometry (LC-ESI-HR-MS) revealed the presence of an array of phenolic compounds, sterols and ceramides, as well as di- and triglycerides. KW - cytotoxic activity KW - ergosterol derivative KW - metabolic analysis KW - docking studies KW - seagrass KW - Thalassodendron ciliatum Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-236085 VL - 18 IS - 7 ER - TY - JOUR A1 - Wen, Xinbo A1 - Nowak-Król, Agnieszka A1 - Nagler, Oliver A1 - Kraus, Felix A1 - Zhu, Na A1 - Zheng, Nan A1 - Müller, Matthias A1 - Schmidt, David A1 - Xie, Zengqi A1 - Würthner, Frank T1 - Tetrahydroxy-perylene bisimide embedded in zinc oxide thin film as electron transporting layer for high performance non-fullerene organic solar cells JF - Angewandte Chemie International Edition N2 - By introduction of four hydroxy (HO) groups into the two perylene bisimide (PBI) bay areas, new HO‐PBI ligands were obtained which upon deprotonation can complex ZnII ions and photosensitize semiconductive zinc oxide thin films. Such coordination is beneficial for dispersing PBI photosensitizer molecules evenly into metal oxide films to fabricate organic–inorganic hybrid interlayers for organic solar cells. Supported by the photoconductive effect of the ZnO:HO‐PBI hybrid interlayers, improved electron collection and transportation is achieved in fullerene and non‐fullerene polymer solar cell devices, leading to remarkable power conversion efficiencies of up to 15.95 % for a non‐fullerene based organic solar cell. KW - hydroxylation KW - metal complexenes KW - perylene bisimide KW - photoconductive interlayer KW - solar cells Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204723 VL - 58 IS - 37 ER - TY - JOUR A1 - Neitz, Hermann A1 - Bessi, Irene A1 - Kachler, Valentin A1 - Michel, Manuela A1 - Höbartner, Claudia T1 - Tailored tolane‐perfluorotolane assembly as supramolecular base pair replacement in DNA JF - Angewandte Chemie International Edition N2 - Arene‐fluoroarene interactions offer outstanding possibilities for engineering of supramolecular systems, including nucleic acids. Here, we implement the tolane‐perfluorotolane interaction as base pair replacement in DNA. Tolane (THH) and perfluorotolane (TFF) moieties were connected to acyclic backbone units, comprising glycol nucleic acid (GNA) or butyl nucleic acid (BuNA) building blocks, that were incorporated via phosphoramidite chemistry at opposite positions in a DNA duplex. Thermodynamic analyses by UV thermal melting revealed a compelling stabilization by THH/TFF heteropairs only when connected to the BuNA backbone, but not with the shorter GNA linker. Detailed NMR studies confirmed the preference of the BuNA backbone for enhanced polar π‐stacking. This work defines how orthogonal supramolecular interactions can be tailored by small constitutional changes in the DNA backbone, and it inspires future studies of arene‐fluoroarene‐programmed assembly of DNA. KW - arene-fluoroarene KW - artificial base pair KW - DNA KW - sSupramolecular interaction KW - XNA Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-312575 VL - 62 IS - 1 ER - TY - THES A1 - Roos, Markus T1 - Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems T1 - Synthese, Photophysik und Photokatalyse von [FeFe]-Komplex enthaltenden Dyaden und bimolekularen Systemen N2 - In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis. N2 - Im Rahmen dieser Arbeit konnten insgesamt drei photokatalytisch aktive Dyaden zur Protonenreduktion zusammen mit den zugehörigen Einzelkomponenten synthetisiert werden. Zwei von ihnen, D1 und D2, umfassten einen [Ru(bpy)3]2+-Photosensibilisator und D3 einen [Ir(ppy)2bpy]+-Photosensibilisator. Als Katalysator wurde in allen Systemen ein Ppyr3-substituierter Propyldithiolat-[FeFe]-Komplex verwendet. Die absorptionsspektroskopischen und elektrochemischen Untersuchungen zeigten, dass eine innerdyadische elektronische Kopplung aufgrund von Konjugationsblockern innerhalb der verwendeten Brückeneinheiten wirksam verhindert wird. Die photokatalytischen Untersuchungen zeigten, dass alle dyadenhaltigen Zweikomponentensysteme (2CS) eine signifikant schlechtere Leistung zeigten als die entsprechenden bimolekularen Dreikomponentensysteme (3CS). Mithilfe der transienten Absorptionsspektroskopie konnte gezeigt werden, dass sich die 2CS während der Photokatalyse sehr ähnlich wie die zugehörigen Mehrkomponentensysteme verhalten. Das Elektron, das für den intramolekularen Transfer von der Photosensibilisatoreinheit zur Katalysatoreinheit innerhalb der Dyaden vorgesehen war, verbleibt analog zu den 3CS und trotz des kovalent gebundenen Katalysators relativ lange am Photosensibilisator. Es wird daher angenommen, dass dieser intramolekulare Elektronentransfer wahrscheinlich aufgrund der schwachen elektronischen Kopplung, die durch die verwendeten Brückeneinheiten verursacht wird, behindert wird. Stattdessen umgeht das System dies durch einen intermolekularen Transfer zu anderen Dyadenmolekülen in unmittelbarer Nähe. Darüber hinaus konnte mithilfe von Emissionslöschungsexperimenten und elektrochemischen Untersuchungen eindeutig darauf geschlossen werden, dass alle untersuchten Systeme während der Photokatalyse über den reduktiven Löschmechanismus ablaufen. KW - Fotokatalyse KW - Elektronentransfer KW - proton reduction KW - [FeFe] hydrogenase mimic KW - dyad KW - ruthenium photosensitizer KW - iridium photosensitizer KW - Protonenreduktion KW - [FeFe]-Hydrogenase Imitator KW - Dyade KW - Ruthenium-Photosensibilisator KW - Iridium-Photosensibilisator Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234537 ER -