TY - THES A1 - Pavel, Ioana-Emilia T1 - Vibrational spectroscopy and density functional theory calculations, a powerful approach for the characterization of pharmaceuticals and new organometallic complexes T1 - Schwingungsspektroskopie und Dichtefunktionaltheorie-Rechnungen, ein vielversprechender Ansatz zur Charakterisierung von Pharmazeutika und neuer metallorganischer Komplexe. N2 - In the current work, several well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) and new organometallic compounds (nickel(II) cupferronato complexes NiL2An, L = PhN2O2-, n = 1, A = o-phenanthroline (1), o,o’-bipyridine (2) and n = 2, A = H2O (3), o-NH2Py (4), o-C6H4(NH2)2 (5); silylene-bridged dinuclear iron complexes [Cp(OC)2Fe]2SiX2 (X = H (6), F (7), Cl (8), Br (9), I (10)); 3-silaoxetane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-oxa-3-silacyclobutane (11) and 3-silathietane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-sila-3-thiacyclobutane (12) compounds), which have successfully been characterized by using vibrational spectroscopy in conjunction with accurate density functional theory (DFT) calculations, are presented. The DFT computed molecular geometries of the species of interest reproduced the crystal structure data very well and in conjunction with IR and Raman measurements helped us to clarify the structures of the compounds, for which no experimental data were available; and this, especially for the new organometallic compounds, where the X-Ray analysis was limited by the non-availability of single crystals (3, 5, 10). Furthermore, a natural population analysis (NPA) and natural bond orbital (NBO) calculations together with a detailed analysis of the IR and Raman experimental as well as calculated spectra of the new organometallic compounds, allowed us to study some special bonding situations (1-12) or to monitor the structural changes observed with the change in temperature during the Raman experiments (11, 12). By combining these two methods (DFT and vibrational spectroscopy), the auspicious results obtained on the organometallic compounds 6-12 and overall in literature, made us confident of the power of theoretical calculations in aiding the interpretation of rich SERS spectra by solving some interesting issues. Consequently, the Raman and SERS spectra of well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) or new potentially biological active organometallic complexes (1-5), that were synthetized by our coworkers, were discussed with the assistance of the accurate results obtained from DFT calculations (structural parameters, harmonic vibrational wavenumbers, Raman scattering activities), and many previous incomplete assignments have been analyzed and improved. This allowed us to establish the vibrational behavior of these biological compounds near a biological artificial model at different pH values or concentrations (Ag substrate), taking into account that information about the species present under particular conditions could be of great importance for the interpretation of biochemical processes. The total electron density of molecules and the partial charges situated on selected atoms, which were determined theoretically by NPA, allowed us to establish the probability of different atoms acting as an adsorptive site for the metal surface. Moreover, a closer examination of the calculated orbitals of molecules brought further arguments on the presence or absence of the photoproducts at the Ag surface during the irradiation (1,4-dihydrazinophthalazine sulfate). Overall, the results provide a benchmark illustration of the virtues of DFT in aiding the interpretation of rich vibrational spectra attainable for larger polyatomic adsorbates by using SERS, as well as in furnishing detailed insight into the relation between the vibrational properties and the nature of the Ag substrate-adsorbate bonding. Therefore, we strongly believe that theoretical calculations will become a matter of rapidly growing scientific and practical interest in SERS. N2 - In der vorliegenden Arbeit werden allgemein bekannte Pharmazeutika (1,4-Dihydrazin-phtalazinsulfat, Koffein und Papaverinhydrochlorid) und mehrere neue metallorganische Verbindungen (Nickel(II)-Kupferron-Komplexe NiL2An, L = PhN2O2-, n = 1, A = o-phenanthrolin (1), o,o’-bipyridine (2) and n = 2, A = H2O (3), o-NH2Py (4), o-C6H4(NH2)2 (5); Silicium-verbrückte dinucleare Eisen-Komplexe [Cp(OC)2Fe]2SiX2 (X = H (6), F (7), Cl (8), Br (9), I (10)); 3-Silaoxetan 3,3-Dimethyl-2,2,4,4-tetraphenyl-1-oxa-3-silacyclobutan (11) und 3-Silathietan 3,3-Dimethyl-2,2,4,4-tetraphenyl-1-sila-thiacyclobutan (12) Verbindungen) vorgestellt, die erfolgreich unter Verwendung schwingungsspektroskopischer Methoden in Verbindung mit genauen DFT Rechnungen charakterisiert worden sind. Die mittels DFT berechneten Molekülgeometrien der uns interessierenden Substanzen gaben die Daten, die aus Kristallstrukturanalyse erhalten worden sind, sehr gut wieder und halfen uns zusammen mit IR- und Raman-Messungen die Strukturen der Verbindungen aufzuklären, für die bisher keine experimentellen Daten erhältlich waren. Besondere Aufmerksamkeit wurde denjenigen neuen Metallorganika geschenkt, deren Röntgenstrukturanalyse (3, 5, 10) auf Grund der Fehlens von Einkristallen eingeschränkt war. Desweiteren erlaubten uns “natural population analysis” (NPA)- und ” natural bond orbital“ (NBO)-Analysen, ebenso wie detallierte Auswertungen der experimentellen und berechneten Spektren (IR, Raman) der metallorganischen Verbindungen, die Untersuchung spezieller Bindungssituationen (1-12) und die strukturellen Änderungen (11, 12) zu verfolgen, die mit der Variation der Temperatur während der Raman-Messungen einhergehen. Die vielversprechenden Ergebnisse der Untersuchungen an metallorganischen Verbindungen 6-12 sowie entsprechende bisher publizierte Ergebnisse, die durch Kombination dieser zwei Methoden (DFT und Schwingungsspektroskopie) erhalten worden sind, machten uns zuversichtlich, dass theoretische Berechnungen bei der Auswertung auch komplexer SERS-Spektren durch Lösung einiger interessanter Probleme sehr behilflich sein könnten. Folglich konnten die Raman- und SERS-Spektren von bekannten Pharmazeutika (1,4-Dihydrazin-phtalazinsulfat, Koffein und Papaverinhydrochlorid) oder von neuen, potentiell biologisch aktiven Organometall-Komplexen (1-5), die von Mitarbeitern anderer Institute synthetisiert worden sind, unter Zuhilfenahme genauer Ergebnisse aus DFT-Rechnungen (strukturelle Parameter, harmonische Schwingungswellenzahlen, Raman-Streuaktivitäten) interpretiert werden. So war es möglich, viele bisher unvollständig zugeordnete Schwingungen zuzuordnen und zu erklären. Dies erlaubte uns, das Schwingungsverhalten dieser biologischen Substanzen innerhalb eines künstlichen biologischen Modells (Ag-Substrat) bei verschiedenen pH-Werten und Konzentrationen zu ermitteln. Informationen über das Verhalten solcher Verbindungen unter besonderen Bedingungen könnten bei der Interpretation biologischer Prozesse eine wichtige Rolle spielen. Die totale Elektronendichte dieser Moleküle und die Partialladung an unterschiedlichen Atomen, die durch NPA bestimmt wurden, ermöglichten uns, die Adsorptionswahrscheinlichkeit verschiedener Atome an bestimmten Stellen der Metalloberfläche zu ermitteln. Ferner lieferte eine genauere Betrachtung der berechneten Molekülorbitale weitere Hinweise auf das Auftreten oder Fehlen von Photoprodukten auf der Silberoberfläche während der Bestrahlung (1,4-Dihydrazin-phtalazinsulfat). Zusammenfassend zeigen die Ergebnisse die Vorteile von DFT-Rechnungen bei der Interpretation komplexer Schwingungsspektren größerer polyatomarer Adsorbate auf, die nur unter Ausnützung des SERS-Effekts aufgenommen werden können. Auch tragen sie dazu bei, einen detaillierten Einblick in den Zusammenhang zwischen den Schwingungseigenschaften und der Natur der Silbersubstratadsorbat-Bindung zu liefern. Demzufolge sind wir davon überzeugt, dass theoretische Methoden einen größeren Stellenwert bei einem schnell wachsenden wissenschaftlichen und praktischen Interesse an SERS gewinnen werden. KW - Arzneimittel KW - Oberflächenverstärkter Raman-Effekt KW - Dichtefunktionsformalismus KW - Infrarot- und Raman-Spektroskopie KW - SERS KW - DFT KW - Pharmazeutika KW - neue metallorganische Komplexe KW - Infrared and Raman spectroscopy KW - SERS KW - DFT KW - pharmaceuticals KW - new organometallic complexes Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7186 ER - TY - THES A1 - Almeling, Stefan T1 - The use of aerosol-based detection systems in the quality control of drug substances T1 - Die Verwendung von aerosol-basierten Detektionssystemen in der Qualitätskontrolle von Arneiwirkstoffen N2 - The work presented in this thesis was mainly targeted at exploring the capabilities of evaporation based LC detectors as well as further alternatives for the control of impurities in substances not exhibiting a suitable chromophore for UV-detection. In the course of the work carried out, several new methods for the identification, impurities control and composition testing of APIs were elaborated. An evaporation based detector that entered into the field of pharmaceutical analysis in the recent years was the Evaporative Light Scattering Detector (ELSD). However, non-reproducible spikes were reported when injecting concentrated test solutions as they are usually required for the control of impurities. The reasons, for the appearance of these spikes as well as possibilities for their avoidance were explored in a systematic study. Moreover, the dependence of the detector sensitivity on different eluent composition, eluent flow-rate and ELSD settings was investigated. In the course of the revision of the Ph.Eur. monographs for aspartic acid and alanine, a C18 reversed phase ion-pair LC method using 1 mmol/L of perfluoroheptanoic acid as an ion-pair reagent and a charged aerosol detector (CAD) was developed and fully validated for the purity control of Asp. The method was capable of separating the organic acids and major amino acids known to occur as process related impurities. With a slight modification, the method was also applicable for the purity control of Ala. Based on the developed LC-CAD method for the impurity control of alanine, a comparative study of the performance characteristics of different evaporation based LC detectors, i.e. ELSD, CAD and the recently developed Nano Quantity Analyte Detector (NQAD) was carried out. Additionally, an MS detector and qNMR were included in this study. It was found that the control of impurities in Alanine at an ICH conform level could be ensured using LC coupled to CAD, MSD and NQAD detection as well as by the use of qNMR. In terms of performance, prize and ease of use CAD and NQAD were found to be the most suitable alternatives. In terms of repeatability and sensitivity, the CAD appeared slightly superior to the NQAD. The quality of streptomycin sulfate is not sufficiently controlled by the current Ph.Eur. monograph in that an appropriate test for the control of the related substances is missing. A study was carried out to develop a C18 reversed phase ion-pair LC method using pentafluoropropionic acid as an ion-pair reagent and a CAD for the identification and control of the related substances. The developed method allowed the separation of 21 impurities from streptomycin. Moreover, coupling of the method to MS allowed the identification of the separated impurities. The method was shown to be sufficiently sensitive to control the related substances with a disregard limit of 0.1% as it is normally applied in the Ph.Eur. for products derived from fermentation. Currently, the aescin content of horse-chestnut standardized dry extract is determined using a complex and laborious photometric determination. A more selective LC-UV assay determination for beta-aescin has been proposed for the Ph.Eur. draft monograph of horse-chestnut standardized dry extract. Possibilities were explored to further improve the LC-method using detection by CAD. It was demonstrated that by the use of a modified LC-CAD method several problems related to the differences in the UV-response of the various components contained in the active aescin fraction could be eliminated. Moreover the proposed reference standard strategy was reviewed. Eventually, it was demonstrated on the example of two different clusters of pharmacologically active peptides how low energy collision induced dissociation mass spectrometry (low energy CID-MS) can successfully be used for identification testing in pharmacopoeial monographs. In this respect, the combination of a direct confirmation of the molecular mass via the m/z-ratio of the molecule ions with structural sequence information obtained by low energy CID-MS experiments was found to deliver a higher degree of certainty of the identity of a given substance than the set of tests currently described in the monographs. A significant gain in efficiency and throughput and important reduction of the amount of sample consumed during testing were identified as being additional advantages of this approach. Taken together, it could be demonstrated on various examples how recent technological advancements in the field of analytical chemistry can contribute to improve the quality control of APIs. N2 - Die durchgeführten Arbeiten hatten zum Ziel, das Potential von evaporationsbasierten HPLC-Detektoren sowie weiterer moderner Techniken hinsichtlich ihrer Eignung zur Reinheitsprüfung von pharmazeutischen Wirkstoffen zu untersuchen. Im Zuge der Arbeiten wurden verschiedene neue Methoden zur Identifizierung, Verunreinigungskontrolle und zur Überprüfung der Zusammensetzung von pharmazeutischen Wirkstoffen entwickelt. Ein evaporationsbasierter Detektor, der in den letzten Jahren Einzug in die pharmazeutische Analytik gehalten hat, ist der Lichtstreudetektor (ELSD). Allerdings wurde berichtet, dass es im Zusammenhang mit der Injektion konzentrierter Testlösungen zum Auftreten nicht reproduzierbarer Spikes kam. In einer systematischen Studie wurden die Gründe hierfür ermittelt und gleichzeitig Möglichkeiten ihrer Vermeidung aufgezeigt. Darüber hinaus wurde die Abhängigkeit der Empfindlichkeit des Detektors von der Zusammensetzung der mobilen Phase, der LC-Flußrate und den Einstellungen des ELSD untersucht. Im Zuge der Revision der Monografien für Asparaginsäure und Alanin wurde eine C18-Ionenpaar-HPLC-Methode unter Verwendung von 1 mmol/L Perfluorheptansäure und Detektion mittels eines geladenen Sprühnebeldetektors (Charged Aerosol Detector – CAD) für die Reinheitskontrolle von Asparaginsäure entwickelt und validiert. Mit Hilfe dieser Methode konnten sowohl organische Säuren als auch die wesentlichen Aminosäuren, die als prozessrelevante Verunreinigungen bekannt sind, abgetrennt werden. Nach geringfügiger Modifikation konnte diese Methode auch zur Reiheitskontrolle von Alanin eingesetzt werden. Basierend auf der HPLC-CAD-Methode für Alanin wurde eine vergleichende Studie der Leistungsfähigkeit verschiedener evaporationsbasierter HPLC-Detektoren durch-geführt. Untersucht wurden der ELSD, der CAD und der kürzlich entwickelte „Nano Quantity Analyte Detektor“ (NQAD). Weiterhin wurden ein massenspektrometrischer Detektor (MSD) sowie die Quantifizierung mittels NMR-Spektroskopie (qNMR) in die Untersuchung einbezogen. Im Ergebnis war die Reinheitskontrolle von Alanin auf einem ICH konformen Niveau unter Verwendung des CAD, NQAD und MSD sowie mittels qNMR möglich. Hinsichtlich der Kriterien Leistungsfähigkeit, Preis und Benutzerfreundlichkeit waren der CAD und der NQAD die geeignetsten Alternativen. Bezüglich Wiederholbarkeit und Empfindlichkeit war der CAD dem NQAD leicht überlegen. Die Qualität von Streptomycinsulfat wird von der aktuellen Arzneibuchmonografie mangels eines geeigneten Reinheitstests nicht ausreichend kontrolliert. Aus diesem Grund wurde eine C18-Ionenpaar-HPLC-Methode unter Verwendung von Perfluorpropionsäure und Detektion mittels CAD zur Identifizierung und Kontrolle der Verunreinigungen entwickelt. Mit dieser Methode konnten 21 Verunreinigungen von Streptomycin abgetrennt und nach massenspektormetrischer Kopplung identifiziert werden. Die Methode erwies sich als ausreichend empfindlich, um Verunreinigungen mit einer Ausschlussgrenze von 0.1%, wie sie im Europäischen Arzneibuch für Fermentationsprodukte üblicherweise angewandt wird, zu kontrollieren. Derzeit wird der Aescingehalt in standardisiertem Rosskastanien-Trockenextrakt mittels einer komplexen photometrischen Methode bestimmt. Für den entsprechen-den Entwurf einer Monografie des Europäischen Arzneibuchs wurde eine selektivere HPLC-UV-Methode vorgeschlagen. Die Möglichkeiten einer weiteren Verbesserung dieser Methode unter Verwendung des CAD wurden untersucht. Es konnte gezeigt werden, dass eine modifizierte HPLC-CAD-Methode geeignet ist, Probleme, die sich aus der unterschiedlichen UV-Absorption der im Aescingemisch enthaltenen Substanzen ergeben, zu eliminieren. Weiterhin wurde die vorgeschlagene Referenzstandard Strategie überprüft. Abschließend wurde am Beispiel von zwei Gruppen pharmakologisch wirksamer Peptide nachgewiesen, wie kollisionsinduzierte Massenspektrometrie (CID-MS) erfolgreich für die Identitätskontrolle in Arzneibuchmongrafien eingesetzt werden kann. Diesbezüglich erbrachte die Kombination der direkten Massenbestätigung mittels des m/z-Verhältnisses des Molekül-Ions mit den aus dem CID-MS-Experiment erhaltenen Informationen ein höheres Maß an Gewissheit hinsichtlich der Identitätsbestätigung als die derzeit beschriebenen Tests. Als weitere Vorteile dieses Ansatzes wurden ein wesentlicher Effizienzgewinn sowie eine erhebliche Reduktion des durch die Testung verbrauchten Probenmaterials identifiziert. Zusammenfassend zeigen die Arbeiten an verschiedenen Beispielen, wie aktuelle Entwicklungen im Bereich der analytischen Chemie dazu beitragen können, die Qualitätskontrolle von Arzneimittelwirkstoffen zu verbessern. KW - Elektronensprayionisations-Massenspektrometrie KW - Qualitätskontrolle KW - Arzneimittel KW - Reinheitsanalytik KW - evaporationsbasierte Detektoren KW - Charged Aerosol Detektion KW - Streptomycin KW - Aminosäuren KW - Aescin KW - HPLC KW - Europäsches Arzneibuch KW - Purity control KW - evaporation based detectors KW - charged aerosol detector KW - Streptomycin KW - Amino acids KW - Aescin Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-64722 ER - TY - THES A1 - Gluyas, Josef Bheinn George T1 - Synthesis of Silicon-Based Drugs and Odourants T1 - Synthese von Silicium-haltigen Wirkstoffen N2 - This thesis concerns (i) the synthesis and olfactory characterisation of silicon-containing analogues of the musk odourant phantolide, (ii) the synthesis and pharmacological investigation of silicon-containing analogues of retinoids of the EC23 and TTNN type and (iii) the attempted syntheses of silicon-containing analogues of the antipsychotic penfluridol and the antidiarrhoeal agent loperamide. All target compounds and intermediates were characterised by multinuclear NMR studies (1H, 13C, 15N, 19F, 29Si) and elemental analyses or high-resolution mass spectrometry. Additionally, some of these compounds were characterized by single crystal X-ray diffraction studies. N2 - Die vorliegende Arbeit beschreibt (i) die Synthese und olfaktorische Charakterisierung von siliciumhaltigen Derivaten des Moschus-Riechstoffes Phantolid, (ii) die Synthese und pharmakologische Charakterisierung siliciumhaltiger Derivate von Retinoiden des EC23- und TTNN-Typs, und (iii) die Versuche zur Darstellung siliciumhaltiger Analoga der Wirkstoffe Penfluridol und Loperamid. Die Charakterisierung der Zielverbindungen sowie aller auftretenden Zwischenstufen erfolgte durch NMR-Spektroskopie (1H, 13C, 15N, 19F, 29Si) und Elementaranalyse bzw. hochaufgelöste Massenspektrometrie. Außerdem wurden einige der Verbindungen durch Kristallstrukturanalyse charakterisiert. KW - Silicium KW - Arzneimittel KW - Duftstoff KW - Präparative organische Chemie KW - Drugs KW - odourants KW - organic chemistry KW - synthesis silicon KW - organosilicon Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72182 ER - TY - THES A1 - Reggane, Maude T1 - Lowering lattice forces of crystalline bases T1 - Erniedrigung der Gitterenergie von kristallinen basischen Wirkstoffen N2 - The number of active pharmaceutical ingredients (APIs) exhibiting a low solubility in aqueous media or a slow dissolution rate kept rising over the past years urging formulation scientists to explore new ways to tackle poor solubility and to enable oral absorption from such compounds. Bioavailability of poorly water-soluble compounds can be improved by increasing the dissolution rate and/or by increasing the gastro intestinal concentration through transient supersaturation. The dissolution rate of the API can be typically modified by the choice of the physical form, the polymorphic form, the powder surface area, and the local pH, while a transient supersaturation can be extended mainly by nucleation or crystallization inhibiting effects. In the present thesis, three strategies were explored to tailor the dissolution rate, the supersaturation and the hydrotropic solubilization of APIs, weak bases, respectively. The first part of this thesis followed a bioinspired approach to extend the kinetic solubility of salts and co-crystals. API salts and co-crystals are high energy forms that can generate supersaturated solutions with respect to any more stable form, typically the most stable API form in physiological environment. The transient kinetic stabilization of supersaturated states, also termed “parachute effect”, is considered to improve bioavailability and is one aspect of the formulation that can be tailored. Inspiration from plants, which store high concentrations of aromatic bases in their vacuoles via complexation with polyphenols, sparked the evaluation to use hydroxybenzoic acid derivatives for salt or co-crystal engineering. Imatinib was chosen as the model compound for this investigation as its aromaticity and flat molecular architecture could favor interactions with hydroxybenzoic acid derivatives. One 1:1 Imatinib syringate co-crystal (I-SYA (1:1)) and one 1:2 Imatinib syringate co-crystal salt (I-SYA (1:2)) were obtained. Their dissolution assays in simulated intestinal fluid (SIF; a 50 mM phosphate buffer of pH 6.8) revealed that they formed stable solutions for several hours and days, respectively, in contrast to the marketed Imatinib mesylate salt (approx. 1h). This kinetic stability in solution was linked to the nucleation inhibition of the less soluble Imatinib hydrate by syringic acid (SYA). In solution 1H-NMR studies evidenced the aggregation of Imatinib and SYA. The amphiphilic nature of both Imatinib and SYA is considered to drive their association in solution, additionally, multiple intermolecular interactions such as hydrogen bonds and π-π stacking are likely to contribute. The association in solution enabled a phase of extended supersaturation, i.e., a parachute against desupersaturation, while no negative impact of aggregation on the permeability of both Imatinib and SYA was observed. A prerequisite to reach supersaturation is a rapid dissolution and release of the API from the formulation. Accordingly, the second and third part of this thesis is focused on the so-called “spring effect” of amorphous solid dispersions (ASDs). The addition of a hydrotropic agent, meaning a molecule that can solubilize poorly water-soluble APIs in aqueous solutions (well-known examples of hydrotropes are benzoic acid and nicotinamide) into an amorphous Ciprofloxacin-polymer matrix led to ternary systems with a significantly faster release and higher concentration of the API in SIF as compared to binary ASDs consisting of Ciprofloxacin (CPX) and polymer only. The stronger spring could be rationalized by an improved wetting of the ASD, or/and by a hydrotropic solubilization effect, although these hypotheses need further investigation. Marked differences in the dissolution profiles of binary ASDs were observed in biorelevant fasted simulated intestinal fluid (FaSSIF; a medium containing Na taurocholate (3 mM) and lecithin (0.75 mM) at pH 6.5) as compared to SIF. In FaSSIF, API release from binary polymeric ASDs was largely improved, and the duration of supersaturation was extended. This suggests that the bile salt Na taurocholate and lecithin present in FaSSIF do improve both dissolution rate and supersaturation of ASDs, the two pillars of ASDs as oral enabling formulations. Indeed, bile salts are endogenous surfactants which, together with phospholipids, play an important role in the wetting, solubilization, and absorption of lipophilic compounds. The aim of the third part of the present thesis was to study ASDs as formulation principles reducing the strong positive food effect of Compound A. By inclusion of Na taurocholate (NaTC) within the matrix of polymeric ASDs a significant improvement of the dissolution rate and the kinetic solubility in SIF were achieved. Transient supersaturated states of up to four orders of magnitude over the equilibrium solubility were obtained. Two ASDs were selected for further in vivo evaluation in dog. The first was a NaTC/Eudragit E based ASD meant to dissolve and release Compound A in the acidic environment of the stomach, where its solubility is the highest. The second relied on the release of Compound A in the neutral environment of the duodenum and jejunum by using an enterically dissolving polymer, HPMC-P. Releasing the API at the site of its putative absorption was an attempt to control supersaturation levels in the duodenum and to prevent portioning and thus dilution effects during transfer from the stomach. In fasted dogs, exposure from the NaTC/HPMC-P ASD was close to that of the reference Compound A formulation under fed conditions, which suggests an improved dissolution rate and kinetic solubility under fasted conditions (historical data). The exposure from the NaTC/Eudragit E ASD was twice as low as from the NaTC/HPMC-P ASD, and also lower compared to Compound A reference formulation, whereas in vitro the parachute effect of the NaTC/Eudragit E ASD was largely superior to that of the NaTC/HPMC-P ASD. A difference in the extend of the parachute could be related to differences in the thermodynamic activity of dissolved molecules from the two ASDs. Indeed, the high instability of the NaTC/HPMC-P ASD could stem from a high thermodynamic activity driving diffusion through membranes, whereas less instable solutions of NaTC/Eudragit E could indicate solubilization effects which often translate into a lower flux through the biological membrane. Additionally, the pH of the environment where dissolution takes place might be an important factor for absorption, and could also account for the difference in exposure from the two ASDs. The aim of this thesis was to explore how the intimate environment of weak, poorly soluble bases could be functionalized to improve dissolution rate and kinetic solubility. The investigations highlighted that the performance of enabling oral delivery formulations of weak bases in aqueous media can be enhanced at different levels. At one end initial dissolution rate of ASDs can be tailored by introducing hydrotropes or/and bile salts within the polymeric matrix of ASDs. Bile salts, when combined with appropriate polymers, had also a precipitation inhibition effect enabling the maintenance of supersaturation for a bio-relevant period of time. These results set the ground for further investigations to comprehend specific interactions between bile salts and APIs, and potentially polymers at the molecular level. It will be interesting to explore how such complex systems can be exploited in the formulation design of poorly water-soluble APIs. In addition, it was observed that the duration of supersaturation generated by salts/co-crystals can be extended by the pertinent selection of counterions or coformers. The in vivo relevance of these tunings remains to be evaluated, as translation from closed, in vitro systems to the highly dynamic gastrointestinal environment is not straightforward. A better understanding of the contribution of each kinetic stage (dissolution, supersaturation, and precipitation) and their interplay with physiological factors impacting absorption is essential to facilitate the design of formulations with improved pharmacokinetics. N2 - Die Anzahl chemischer Wirkstoffe, welche sich schlecht oder langsam auflösen, hat in den vergangenen Jahren stetig zugenommen. Aus diesem Grunde müssen Entwickler neuer Formulierungen Wege finden, um die Löslichkeit und damit die Absorbtion dieser Wirkstoffe zu verbessern. Grundsätzlich kann die Bioverfügbarkeit schlecht wasserlöslicher Wirkstoffe verbessert werden, wenn die Auflöserate verbessert wird und/oder durch höhere Konzentrationen der Wirkstoffe am Resorptionsort, beispielsweise durch kontrollierte Übersättigungen. Die Auflösungsrate eines Wirkstoffes kann durch die Wahl der physikalischen Form (Salz und Polymorph), Modifikation der spezifischen Oberfläche (Mahlen) und lokalem pH Wert (Ionisierungszustand) maßgeblich beeinflusst werden. Im Falle von kontrollierten Übersättigungen, kann die Verlängerung der Dauer der Übersättigung durch die Unterdrückung der Bildung von Kristallisationskeimen erreicht werden. In der vorliegenden Promotionsarbeit wurden neue Strategien entlang dieser Herausforderungen für schwach basische Wirkstoffe untersucht und entwickelt. Im ersten Teil der Arbeit wurden biomimetische Strategien angewandt, um die physikalischen und biopharmazeutischen Eigenschaften basischer Wirkstoffe zu verbessern. Dieses erfolgte mit der Absicht, durch strukturelles Design von Salzen oder Co-Kristallen das Ausfallen des Wirkstoffes aus Lösungen hinauszögern und eine Aufklärung der zugrundeliegenden Mechanismen vorzunehmen. Dabei konnten mit ausgesuchten Wirkstoff-Salzen oder Co-Kristallen Lösungen erzeugt werden, welche zu Übersättigungen führten. Diese thermodynamisch instabilen allerdings (vorübergehend) kinetisch gehemmt vorliegenden Zustände sind mit dem Begriff „Fallschirm Effekt“ in der Literatur verknüpft, womit die Verlängerung der Übersättigungen durch geeignete Salz-/Cokristallbildung metaphorisch umschrieben ist. Diese kinetisch gehemmten und somit langanhaltend vorliegenden Übersättigungen sind entscheidend für die Verbesserung der Bioverfügbarkeit. Pflanzen nutzen diese Effekte ebenfalls aus. So können Pflanzen aromatische und schlecht wasserlösliche Basen in übersättigten Lösungen kinetisch „stabilisieren“, in dem diese an Polyphenol-Komplexe in den Vacuolen ihrer Zellen komplexiert vorliegen. Hier wurden diese bei Pflanzen beobachteten Effekte für Hydroxybenzoesäure-Derivate übernommen untersucht und zur pharmazeutischen Verbesserung des Wirkstoffes Imatinib angewandt. Das aromatische Imatinib hat eine flache molekulare Struktur, die mit Hydroxybenzoesäure-Derivaten interagieren sollte. Es wurde ein 1:1 Imatinib-Syringat Co-Kristall (I-SYA (1:1)) sowie ein 1:2 Imatinib-Syringat Co-Kristall Salz (I-SYA (1:2)) hergestellt. Mittels dieser Salze konnten beeindruckende kinetisch „stabilisierte“ und übersättigte Lösungen des Imatinib realisiert werden, die beispielsweise in künstlicher Darmflüssigkeit (SIF) über Stunden beziehungsweise Tage vorlagen. Dieses steht im Gegensatz zum handelsüblichen Imatinib-Mesylat (Dauer der Übersättigung ca. 1 Stunde). Die kinetische „Stabilisierung“ der Lösung wurde mechanistisch mittels 1H-NMR Studien auf eine Unterdrückung/Verzögerung der Kristallkeimbildung des weniger löslichen Imatinib Hydrates durch Anwesenheit der Polyphenolsäure (Syringasäure) zurückgeführt. In-vitro Transportstudien durch biologische Barrieren zeigten, dass die Syringasäure die Permeabilität des Imatinib nicht nachteilig beeinflusste. Während in diesem Kapitel die Verlängerung von Übersättigungszuständen das Ziel war (Fallschirm Effekt; „parachute“), ist die Optimierung des Ausmaßes der Übersättigung das Ziel der folgenden Kapitel, welches in der Literatur als „Feder-Effekt“ („spring“) bekannt geworden ist. Eine Voraussetzung zum Erreichen von Übersättigung ist die rasche Auflösung und Freisetzung des Wirkstoffes aus der Formulierung. Diesen „Feder-Effekt“ wurde hier in amorphen Feststoffdispersionen (ASDs) erreicht. Zielführend war die Anwendung hydrotroper Moleküle, welche in wässerigen Lösungen lösungsvermittelnd auf schlecht wasserlösliche Substanzen wirken. Diese Formulierungen führten bei amorphen Wirkstoff-Polymer Gemischen zu ternären Systemen mit deutlich schnellerer Wirkstofffreisetzung und es konnten deutlich höhere Konzentration an gelöstem Wirkstoff in simulierten gastrointestinalen Flüssigkeiten erreicht werden, als dieses im Vergleich zu binären ASDs der Fall war, die lediglich aus Wirkstoff und Polymer zusammengesetzt waren. Im Übrigen konnte gezeigt werden, dass sich die Auflösungsprofile der ASDs in verschiedenen Medien unterschieden. Durch diesen Vergleich in unterschiedlichen Medien konnte die Bedeutung des Taurocholats und des Lezithins (beide Moleküle sind Bestandteil der Gallenflüssigkeit) für die Verbesserung der Auflösungsrate von ASDs gezeigt werden. Gallensalze können in diesem Sinne als „endogene Tenside“ verstanden werden, die zusammen mit Phospholipiden eine wichtige Rolle in der Lösungsvermittlung und Absorption von lipophilen Substanzen haben. Während im vorhergehenden Teil die Bedeutung von Gallensalzen für Auflösungsphänomene aus ASDs im Zentrum des Interesses lag, wurde nun eine andere Herausforderung pharmazeutischer Entwicklungen adressiert, der sogenannte „Food effect“. Dieser Effekt meint die nahrungsbedingte Änderung der Bioverfügbarkeit von Wirkstoffen. In diesen Arbeiten führte der Zusatz von Natriumtaurocholat in eine ASD Matrix zu einer Verbesserung der Auflösungsrate und der kinetischen Löslichkeit in simulierten intestinalen Flüssigkeiten mit der bemerkenswerten Verbesserung der kinetischen Löslichkeit um bis zu vier log Einheiten im Vergleich zur thermodynamischen Löslichkeit. Zwei ASD Formulierungen wurden für eine Studie am Hund ausgewählt, die eine bestehend aus Natriumtaurocholat/Eudragit E (Eudragit E löst sich in der sauren Umgebung des Magens auf) und die andere aus Natriumtaurocholat/HPMC-P (HPMC-P setzt Wirkstoffe in der pH-neutraler Umgebung des Dünndarms frei). Unerwartet waren die resultierenden Wirkstoff-Blutspiegel. Die Blutspiegel nach Verabreichung der NaTC/Eudragit E ASD waren nur etwa halb so hoch als jene von NaTC/HPMC-P, was im Gegensatz zu den in-vitro Konzentrationsprofilen steht. Eine mögliche Erklärung ist, dass instabile Lösungen, wie sie für die Natriumtaurocholat/HPMC-P ASD in vitro beobachtet wurden, die Diffusion durch die biologische Membran antreiben, wogegen dieser Effekt umso geringer ausfällt, je stabiler die erzeugte Lösung ist, wie das im Falle der Natriumtaurocholat/Eudragit E ASD in vitro der Fall war. Ein anderer Faktor, der in diesem Zusammenhang zu diskutieren ist, ist der unterschiedliche pH–Wert am Ort, an dem beide ASD den Wirkstoff freisetzen. Übergreifendes Ziel der Promotionsarbeit war die Optimierung der unmittelbaren Umgebung von schwachen, schlecht löslichen Basen, um die Auflösungsgeschwindigkeit und kinetische Löslichkeit der Wirkstoffe zu verbessern. Einerseits lässt sich die Auflösungsrate durch den Zusatz von hydrotropen Substanzen und/oder Gallensalzen zur Polymermatrix von ASDs steigern. Die Kombination von Gallensalzen mit geeigneten Polymeren konnte effektiv das Ausfallen des Wirkstoffes begrenzen und die Dauer von Übersättigungen deutlich verbessern. Diese interessanten Kombinationen sollten für andere Polymere zukünftig untersucht werden, so dass die spezifischen Wechselwirkungen zwischen Gallensalzen und Wirkstoff, gegebenenfalls auch mit Polymeren, auf molekularer Ebene besser verstanden werden können. In einem Teil der Promotionsarbeit wurde auch gezeigt, dass die Dauer der Übersättigung durch eine gezielte Auswahl von Gegenionen oder von Co-Kristallbildnern verlängert werden kann. Die in vivo Relevanz dieser Ansätze, sind vor dem Hintergrund der sehr dynamischen Verhältnisse im Magen-Darm-Trakt zu bewerten. Darüber hinaus ist ein besseres Verständnis des Zusammenspiels der kinetischen Phasen der Freisetzung (Auflösung, Übersättigung und Ausfällung) mit physiologischen Einflussgrößen zu erarbeiten, um zuverlässig Darreichungsformen mit besseren pharmazeutischen Eigenschaften zu entwickeln. KW - Kokristallisation KW - Bioverfügbarkeit KW - Löslichkeit KW - Gallensalze KW - Arzneimittel KW - amorphous solid dispersion KW - cocrystal KW - Imatinib KW - lattice forces KW - solubility KW - bioavailability KW - permeability Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163803 ER - TY - THES A1 - Widmer, Toni T1 - Lowering lattice forces in drug substance crystals to improve dissolution and solubility T1 - Verringerung der Gitterkräfte in kristallinen Arzneistoffen zur Erhöhung der Auflösungsgeschwindigkeit und Löslichkeit N2 - Lattice forces are based on the attraction between the single moieties of molecules. The strength of lattice forces has an impact on the solid state and related physical properties such as melting point, boiling point, vapor pressure solvation and solubility. For solvation to occur, energy is required to break the lattice forces attracting ions and molecules among themselves. The energy for breaking up the attraction between the molecules is gained from the energy released when ions or molecules of the lattice associate with molecules of the solvent. Solubility is therefore, directly linked to the energy which is required to break the lattice forces and the energy which is liberated by solvation of the molecules or ions. Based on this relation, the lattice forces in two acidic compounds and a neutral compound were subsequently lowered by different approaches with the intention to increase the solubility, supersaturation, and dissolution rate. The conversion to an ionic liquid and the embedding of the compound in a pH-sensitive matrix in an amorphous state were investigated with an acidic compound and its pro-drug. The tetrabutylphosphonium (TBPH) salt showed the most promising properties among the tested counter ions. It alters the properties of the compound from a highly crystalline physicochemical state to an amorphous readily soluble material showing supersaturation in a wider pH range and higher solubility than the sodium and potassium salts. A solid dispersion approach was developed in parallel. Solid dispersions with two different pH-sensitive polymers and different drug load were prepared by lyophilization to determine the miscibility of the compound and the polymer by differential scanning calorimetry (DSC). A miscibility of 50% of the amorphous acid with the pH-sensitive Eudragit L100-55 matrix and a miscibility of 40% with hydroxypropyl methylcellulose acetate succinate (HPMC-AS) was found. Both approaches, the TBPH salt and the solid dispersion based on the pH-sensitive Eudragit L100-55 were tested in vivo. The TBPH salt was dosed in a buffered solution to prevent precipitation in the acidic stomach pH. This resulted in BAV higher than the crystalline suspension but lower than the solid dispersion. There were no acute toxicology effects seen. Thus, TBPH was considered safe for further studies. The TBPH salts were very hygroscopic, sticky and prone to precipitation as free compound when exposed to low pH when simulating the passage through the stomach. Thus, the principle of the ionic liquid was combined with the principle of an amorphous solid dispersion. This mitigated the risk of precipitation of the TBPH salt during the passage of the stomach. Also delinquency upon open storage was improved by embedding the TBPH salt in a pH-sensitive polymer. Dissolution tests mimicking the pH gradient in the gastro intestinal tract confirmed the protective properties of the pH-sensitive polymer matrices against recrystallization at low stomach pH in vitro. Furthermore, supersaturation at pH ranges relevant in the intestines of preclinical species or humans was observed. The TBPH solid dispersion showed superior supersaturation behavior in vitro compared to the free acid in pH-sensitive matrix. However, equally increased bioavailability (BAV) was observed when the amorphous solid dispersion contained the free acid form or the TBPH salt. Absorption seemed to be so fast that the short in vitro supersaturation observed for the free from in pH-sensitive matrix was already sufficient for complete absorption within 15 - 30 minutes. This is in accordance with the short tmax of around 15 - 30 minutes after oral application of the low lattice force principles. The pharmacokinetic (PK) profile became the main focus of further optimization as the BAV was maximized already. Early maximal plasma concentration (tmax) went along with high maximal plasma concentration (Cmax) for the low lattice force principles. Central nervous system related side effects as consequence of the PK profile with such a high Cmax were likely to happen and therefore, the formulation principles were modified to maintain the doubled BAV and reduce the observed Cmax. Additionally, the compound showed a short half-life requiring a two times daily dose, which is suboptimal for a chronic treatment. The amorphous acid in pH-matrix showed a modified PK profile when dosed in a hydrogel but not in an oleo gel. Surprisingly, administration of the TBPH salt in pH-matrix suspended in oil showed a massive delay of the tmax to 8 hours and a reduction of Cmax by factor 2 - 3 with unchanged good BAV when administered as a suspension in oil without increased viscosity. TBPH salt solution with a high viscosity resulted in the same PK profile as when administered without increased viscosity. The animal model was changed from rat to dog. The dose was limited to 15 mg/dog since they reacted much more sensitively to the drug. BAV at this dose level was 100% for the crystalline suspension already, thus the focus of this study was not increasing BAV but to achieve prolonged and/or delayed exposure using different formulation principles elaborated in rats before. An immediate release formulation of 3 mg was combined with a delayed/modified release principle containing 12 mg of the compound. An additional study arm was conducted with a remote controlled device programmed to deliver a first dose of 3 mg instantaneously after passing the stomach and a second dose of 12 mg when entering the caecum. The tmax remained short for all formulation principles and it seemed that delayed and modified release lead to BAV reduction. The modified PK profiles could not be translated to an oral dog model which endorsed the hypothesis of an absorption window; however, the in vitro results could be translated to a dog model for colonic absorption. A nanosuspension of the crystalline compound, the TBPH salt in pH-matrix and the TBPH salt of the pro-drug of the compound were administered rectally to determine colonic absorption. The nanosuspension showed exposure around the limit of quantification whereas the TBPH in pH-matrix showed 4% BAV and the pro-drug as TBPH salt in pH-matrix resulted in 12% BAV although the pro-drug is factor 3 less soluble. This was in line with the increased permeation of the pro-drug which was observed in the Caco2 experiments. The bioavailability was increased by using the low lattice force principles and validated the hypothesis for the acidic drug and its pro-drug in the colonic dog model. Chemical and physicochemical stability of the investigated solid dispersions was confirmed for at least 18 months at room temperature. Amorphous solid dispersions were investigated to lower lattice forces of a neutral molecule. Solid dispersions are well known from literature; however, they are not frequently used as principles for dosage forms due to limitations in physical stability and complex manufacturing processes. A viable formulation principle was developed for a neutral compound assuming that the stability of a solid dispersion with a drug load below the maximal miscibility will be better than one which exceeds the maximal miscibility. The dispersed and amorphous state of the neutral compound resulted in a higher energy level and chemical potential compared to a crystalline form implying that they are thermodynamically instable and sensitive to recrystallization. This was confirmed by the fast recrystallization of an amorphous solid dispersion made from HPMC with 50% drug load which recrystallized within a few days. Solid dispersions with different drug loads in different polymers and in polymer mixtures were prepared by lyophilization. The miscibility of the compound and the polymer was determined by DSC as the miscibility is a surrogate for maximal stable drugload of the solid dispersion. HPMC was found to be miscible with 20% compound confirming the instability of the 50% HPMC solid dispersion observed earlier. Based on dosing needs, a miscibility/drug load of at least 30% was mandatory because of the dosing requirements to dose less than 1500 mg of final formulation. This was considered as maximal swallowable volume for later clinical development. Thus, all systems with a miscibility higher or equal to 30% drug in polymer were evaluated in an in vitro dissolution test and ranked in comparison with amorphous pure compound, crystalline compound and a 20% drug load solid dispersion made from HPMC. The HPMC based solid dispersion which gave good exposure in previous in vivo experiments did not support the high drugload that was needed. Therefore, similar in vitro behavior of this solid dispersion should result in similar in vivo performance. The polyvinylpyrrolidone (PVP) based solid dispersions scored with high drug load and medium initial kinetic solubility. The Soluplus based solid dispersion offer lower drug load and slightly lower initial kinetic solubility, but showed an extended supersaturation. The 4 best performing systems were evaluated in rats. They resulted in a short Tmax of 15 minutes and BAV higher than 85% indicating fast and complete absorption. The reference HPMC based solid dispersion with a drug load of 20% showed 65% BAV. This showed that higher drug loads were feasible and did not limit absorption in this animal model. Since the estimated human dose required a higher formulation density than obtained from lyophilization or spray drying, melt extrusion of the solid dispersion was considered to be the most adequate technology. The process temperature needed to be below 200 °C as this value represents the degradation temperature of the polymers. It was investigated by differential scanning calorimetry whether the compound can be mixed with the molten polymer. None of the polymers could dissolve the crystalline compound below the degradation point of the polymer. The temperature had to be increased to 260 °C until the compound was molten together to a monophasic system with polymer. This resulted in degradation of the polymers. Therefore, different plasticizers and small organic molecules with similar functional groups as the compound were investigated on their ability to reduce the melting point of the mixture of polymer and compound. Positive results were obtained with several small molecules. Based on a literature review, nicotinamide had the least concerning pharmaceutical activities and was chosen for further development. Solid dispersions with the same composition as the ones tested in rat were prepared with 9% nicotinamide as softener. Extrusion without nicotinamide was not possible at 135 °C or at 170 °C whereas the addition of 9% nicotinamide led to a homogenous extrudate when processed at 135 °C. The solid state of the extrudates was not molecularly dispersed but the compound was in a crystalline state. They could not reach the in vitro performance observed for the lyophilized solid dispersions with Soluplus or PVP derivatives. Nevertheless, the performances in the supersaturation assay were comparable to the HPMC based lyophilized solid dispersion. The Soluplus and PVP based crystalline extrudates were evaluated in a dog PK showing that the crystalline solid dispersion does not enable BAV higher than 90% within 24 hours after application. In parallel, the hygroscopicity of the meltextrudates was investigated by DVS and the best performing system based on Kollidon VA64 was further optimized regarding the solid state after its extrusion. The minimal process temperature to obtain a fully amorphous solid dispersion was determined by hot stage X-ray powder diffraction analysis (XRPD) and confirmed by lab scale extrusion. Addition of 9% nicotinamide lowered the process temperature from 220 °C (without nicotinamide) to 200 °C with nicotinamide. The minimal temperature for obtaining crystal free material was independent of the nicotinamide amount as soon as it exceeded 9%. Lowering the process temperature with nicotinamide reduced the impurity levels from 3.5% at 220 °C to 1.1% at 200 °C. The fully amorphous extrudates performed now better in the in vitro supersaturation assay than the lyophilized amorphous HPMC solid dispersion and the crystalline extrudates which were extruded at 135 °C. The process was up-scaled to a pilot scale extruder with alternative screw designs increasing mechanical shear forces and mixing which enabled lower process temperatures. This resulted in a maximal process temperature of 195 °C when nicotinamide was present and 205 °C without nicotinamide. However, shorter process time and reduced process temperatures (compared to the lab scale equipment) resulted in impurity levels smaller than 0.5% for both compositions and temperatures and made the nicotinamide obsolete. The amorphous extrudates from the pilot scale extruder performed better in vitro than the crystalline extrudates from the lab scale extruder and the lyophilized HPMC solid dispersion. A comparable PK profile of the HPMC solid dispersion and the amorphous melt extruded formulation principle was anticipated from these in vitro results. This was confirmed by the pharmacokinetic profile in dogs after oral administration of the final extruded solid dispersion formulation which was equivalent with the pharmacokinetic profile of the HPMC based solid dispersion formulation. The assumption that using a drug load below the miscibility prevents the solid dispersion from recrystallization was verified at least for a limited time by a stability test at elevated temperatures for 3 months showing no change in solid state. This indicates the opportunities of the low lattice forces approach, but also showed the importance of developing principles first assuring stable solid state, performance in vitro and in vivo, tailor them in a second step based on performance and combine them with technology such as melt extrusion as third step. If these steps are done in the context of clinical needs and quality it can rationalize the development of a solid dispersion and minimalize the formulation related risks regarding biopharmacy and stability. N2 - Gitterkräfte basieren auf der Interaktion zwischen einzelnen funktionellen Gruppen und Regionen von Molekülen oder Ionen. Die Summe der Interaktionen beeinflusst physikalische Eigenschaften wie Schmelzpunkt, Siedepunkt, Dampfdruck, Solvatisierung und Löslichkeit. Für die Solvatisierung eines Moleküls aus einem Feststoff muss zum einen Energie aufgewendet werden, damit das Molekül seine Interaktionen mit den es umgebenden Molekülen überwinden kann. Zum anderen wird Energie frei, wenn das herausgelöste Molekül mit dem Solvens interagiert. Die Differenz zwischen der benötigten Energie, um die Interaktionen im festen Zustand zu überwinden, und der Energie, die frei wird, wenn das gelöste Molekül oder Ion mit dem Solvens interagiert, bestimmt die Löslichkeit. Auf dieser Gesetzmässigkeit aufbauend wurden die Gitterkräfte von zwei sauren Arzneistoffen und einem neutralen Arzneistoff sukzessive reduziert, um ihre Löslichkeit entsprechend zu erhöhen. Die sauren Verbindungen, das Stamm-Molekül und dessen Prodrug, wurden mit verschiedenen Gegenionen in ionische Flüssigkeiten umgewandelt. Verschiedene Gegenionen aus der Literatur wurden in die Untersuchungen miteinbezogen. Das Tetrabutylphosphonium-Gegenion (TBPH) hatte besonders vielversprechende Eigenschaften. Es modifizierte den Feststoffzustand von hochkristallin zu amorph. Dies resultierte in guten Löslichkeiten in ungepufferten wässrigen Systemen, vergleichbar mit den bereits bekannten Natriumsalze. Zusätzlich zeigten sie eine massiv verbesserte Löslichkeit bei biorelevantem pH. Die ionischen Flüssigkeiten blieben in Lösung in pH-Bereichen, in denen die klassischen Salze aufgrund ihres Eigen-pHs bereits präzipitierten. Bei einem tiefen pH, wie er im Magen vorkommt, fiel jedoch unmittlerbar die freie Form aus. Daher wurde parallel zum TBPH-Salz eine Solid Dispersion entwickelt auf Basis von pH-sensitiven Polymeren. Diese sollten zum einen den amorphen Zustand stabilisieren, zum anderen verhindern, dass der amorphe Arzneistoff bereits im Magen freigesetzt wird, da er als Säure bei tiefem pH schlecht löslich ist und ausfallen kann. Es wurden Trägermaterialen evaluiert, welche erst bei einem pH grösser als 5.5 löslich sind. Kriterium war die Mischbarkeit der Matrixpolymere mit dem Arzneistoff. Dazu wurden Solid Dispersions, bestehend aus der Verbindung und den Polymermatrices, in verschiedenen Verhältnissen lyophilisiert und anschliessend mit dynamischer Differenzkalorimetrie (DSC) auf ihre Mischbarkeit hin untersucht. Eudragit L100-55 wurde als pH-sensitives Matrixpolymer ausgewählt, da es bis zu 50% mit der Verbindung mischbar war. Hydroxypropyl-methylcellulose-Acetat-Succinat (HPMC-AS) jedoch nur zu 40%. In einer Tierstudie wurden das TBPH-Salz und die Solid Dispersion gegen eine Suspension des kristallinen Arzneistoffes getestet. Aufgrund der stark pH-abhängigen Löslichkeit des TBPH-Salzes wurde es als gepufferte Lösung appliziert, die Solid Dispersion als Suspension. Die beste Pharmakokinetik (PK) wurde für die Solid Dispersion gemessen, gefolgt von der TBPH-Salz-Lösung. Da das TBPH-Salz auch Schwächen im Bereich der Hygroskopizität und der Verarbeitung (wie Zerfliessen und Kleben) zeigte, wurde die ionische Flüssigkeit und die freie, amorphe Form des Arzneistoffes in eine pH-sensitive Matrix inkorporiert. Dissolutionsversuche, welche den pH-Verlauf nach oraler Applikation wiederspiegelten, zeigten, dass die anfänglich beobachtete Präzipitation bei den ionischen Flüssigkeiten bei tiefem pH ausbleibt, wenn sie in die pH-Matrix inkorporiert sind. Zusätzlich konnte eine Übersättigung in Kombination mit der pH-sensitiven Matrix beobachtet werden, nachdem der pH-Wert auf Niveau des Dünndarms anstieg. Der Effekt der Supersaturierung war jedoch mit der ionischen Flüssigkeit signifikant länger. Ebenso verbesserte sich mit der Solid Dispersion die Handhabung der ionischen Flüssigkeiten als Feststoff. Die modifizierten Löslichkeitseigenschaften in vitro führten auch zu einer verdoppelten Bioverfügbarkeit (BAV) in Ratten. Im PK-Profil war kein Unterschied auszumachen, ob der Arzneistoff amorph in pH-Matrix appliziert wurde oder als ionische Flüssigkeit in der pH-Matrix. Die Supersaturierung der freien amorphen Form in pH-Matrix, obwohl wesentlich kürzer als mit dem TBPH-Salz, reichte bereits für eine komplette Absorption in 15-30 Minuten. Dies widerspiegelte auch der tmax-Wert von 30 Minuten. Da Nebenwirkungen oft einhergehen mit hohen maximalen Plasmakonzentrationen (Cmax) und der Arzneistoff relativ schnell aus der Blutzirkulation eliminiert wird, wurde nun versucht, das PK-Profil entsprechend zu modifizieren, um eine längere Exposition und einen tiefere Cmax-Wert bei gleicher Fläche unter der Kurve (AUC) zu erreichen. Die freie amorphe Form des sauren Arzneistoffes zeigte eine leicht verlängerte Zeitspanne, bis Cmax erreicht wurde (tmax), und einen tieferen Cmax-Wert, wenn die Viskosität der dosierten Suspension mit Hydroxypropylmethylcellulose (HPMC) erhöht wurde. Überraschenderweise zeigte das in Maisöl dosierte TBPH-Salz ein um 7 Stunden verzögertes tmax und einen reduzierten Cmax-Wert. Da die Ratte nur bedingt Rückschlüsse und Extrapolation für ein humanes PK-Profil zulässt, wurde der Beagle-Hund als finales und repräsentatives Tiermodel gewählt. Die Hunde reagierten viel sensitiver auf die Verbindung. Deshalb war die maximale Dosis auf 15 mg pro Hund limitiert. Bei dieser Dosis beträgt die BAV für die kristalline freie Form des Arzneistoffes bereits 100%. Das Interesse lag primär auf der Modifizierung des PK-Profils hin zu tieferen Cmax-Werten und späterem tmax bei gleichbleibender AUC. Die Formulierungsansätze aus der Rattenstudie wurden zu einer Dosis von 3 mg kombiniert, welche unmittelbar freigesetzt wird, und einer zweiten Dosis von 12 mg, welche verzögert oder langsamer aufgenommen werden sollte. Zusätzlich wurde eine ferngesteuerte Kapsel benutzt, welche 3 mg sofort nach der Passage des Magens und 12 mg bei Ankunft im Caecum freisetzen sollte. Das tmax blieb für alle Kombinationen kurz und die verzögert oder langsamer freisetzenden Prinzipien resultierten in einer tieferen Exposition. Dies führte zur Formulierung der Hypothese, dass dieser Arzneistoff ein Absorptionsfenster haben könnte. Daher würde die Aufnahme, zumindest im Wesentlichen, auf den Dünndarm beschränkt. Die Entwicklung verzögert freisetzender Arzneiformen, die Anteile der Wirkstoffbeladung distal zum intestinalen Teil des Darmes freisetzen, wäre dann nicht zweckmäßig. Dieser Wirkstoffanteil würde in geringerem Maße, gegebenenfalls auch gar nicht, aufgenommen werden. Da technische Probleme bei der verzögerten Freisetzung nicht ausgeschlossen werden konnten, wurden die Formulierungen nun rektal in den Bereich des Caecums appliziert. Der Arzneistoff wurde als Nanosuspension, als TBPH in pH-Matrix und als TBPH des Prodrugs rektal appliziert. Die Exposition bei der Nanosuspension bewegte sich nahe dem Detektionslimit und ein wenig höher beim TBPH in pH-Matrix. Die Bioverfügbarkeit des Prodrugs als TBPH in pH-Matrix verglichen mit dem TBPH der Grundverbindung in der pH-Matrix war viermal höher. Dies passt gut zur besseren Permeation des Prodrugs in Caco2-Zellen, obwohl das Prodrug um Faktor 3 schlechter löslich ist. Amorphe Solid Dispersions wurden auf ihre Fähigkeit untersucht, die Gitterkräfte im Kristall eines neutralen Moleküls zu senken. Solid Dispersions sind seit ungefähr 50 Jahren in der Literatur bekannt, werden jedoch erst seit kürzerer Zeit erfolgreich von der Pharmaindustrie vermarktet. Die amorphe Form mit dem latenten Risiko der Rekristallisation bedeutet ein grosses Risiko in Bezug auf die Haltbarkeit eines Arzneimittels. In der vorliegenden Arbeit wurde diesem Risiko Rechnung getragen, indem die Mischbarkeit der Substanz mit den Polymeren gründlich untersucht wurde. Systeme, welche mischbar sind, haben ein wesentlich kleineres Risiko, bei der Lagerung zu rekristallisieren. Der amorphe Zustand geht einher mit einer höheren Energie im System, welche das System anfällig macht, durch Kristallisation in den tieferen Energiezustand überzugehen. Dies wurde bei einer HPMC-basierten Solid Dispersion mit 50% Beladung beobachtet. Die Bestimmung der Mischbarkeit deutete auf eine maximale Mischbarkeit von nur 20% hin. Dies korrelierte mit der Rekristallisation dieser Solid Dispersion innerhalb von zwei Wochen, wohingegen diejenige mit nur 20% Beladung wesentlich stabiler war. Basierend auf der zu erwartenden Dosis von 200  400 mg im Menschen, wie sie mit Hilfe der PK-Software vorhergesagt wurde, wurde eine Beladung von mindestens 30% spezifiziert. Alle Kombinationen, die bei der Analyse von den lyophilisierten Systemen mit DSC eine Mischbarkeit von 30% und mehr zeigten, wurden daher in einem Dissolutionstest untersucht. Die Resultate wurden in Relation zum reinen amorphen Arzneistoff, der kristallinen Form und der Solid Dispersion mit HPMC und 20% Beladung bewertet. Diese Solid Dispersion zeigte in Ratten bereits sehr gute Ergebnisse. Daher galt sie als positive Referenz. Systeme, die in vitro gleich gut oder besser abschnitten, sollten ebenfalls in vivo gut abschneiden. Polyvinylpyrrolidon (PVP)-basierte Systeme punkteten mit guter Mischbarkeit und hoher kinetischer Löslichkeit. Soluplus-basierte Systeme zeichneten sich hingegen eher durch lange Supersaturation bei etwas tieferen kinetischen Löslichkeiten und etwas tieferen Mischbarkeiten aus. In der Ratte zeigten alle getesteten Solid Dispersions eine bessere BAV als diejenige mit HPMC. Das tmax war mit 15 Minuten früh und die Absorption vollständig. Dies zeigte, dass höhere Beladungen durchaus möglich sind, ohne dass dies einen negativen Einfluss auf die PK hat. Mit der antizipierten Dosis für den Menschen fielen alle Herstellungsverfahren weg, bei denen das finale Produkt eine kleine Dichte hat. Als adäquat wurde somit die Hot Melt-Extrusion als Herstellungsmethode gewählt. Dieser Prozess hat seine Limitierung jedoch in der maximal möglichen Prozesstemperatur, welche je nach Gerät und Polymer bei ungefähr 200 °C liegt. DSC-Untersuchungen zeigten, dass aber 260 °C nötig sind, um die Substanz und das Polymer zu einer amorphen Phase zusammenzuschmelzen. Dies resultierte in einer Verkohlung der Polymere und war somit nicht umsetzbar. Verschiedene klassische plastifizierende Substanzen und kleinere organische Moleküle mit homologen funktionellen Gruppen wurden auf ihre schmelzpunktreduzierende Wirkung hin untersucht. Vielversprechende Resultate wurden mit mehreren kleinen organischen Molekülen beobachtet. Die klassischen plastifizierenden Substanzen waren allesamt nicht mischbar mit dem Arzneistoff. Nicotinamid wurde aufgrund seines Status als Nahrungsergänzungsmittel für die weitere Entwicklung ausgewählt. Die Solid Dispersions aus der Rattenstudie wurden mit den identischen Beladungen gemischt, jedoch waren die Pulvermischungen bei Temperaturen unter 170 °C nicht extrudierbar. Bei Zugabe von 9% Nicotinamid war die Mischung leicht über dem Schmelzpunkt von Nicotinamid bei 135 °C extrudierbar. Die Extrudate waren für alle verwendeten Polymere kristallin, die Resultate im Auflösungstest im Bereich der HPMC-Solid Dispersion mit 20% Beladung konnten aber mit den Ergebnissen der Kollidon- und Soluplus-basierten Systeme aus der Rattenstudie (alle amorph) nicht mithalten. Die folgende Hundestudie, welche mit einer Formulierung basierend auf Kollidon VA64, einer auf Kollidon K12/K30 und einer auf Basis Kollidon VA64/Soluplus Formulierung durchgeführt wurde, zeigte eine Verbesserung der PK im Hund. Gleichzeitig war aber auch ersichtlich, dass die amorphe HPMC-Solid Dispersion mit 20% Beladung noch wesentlich besser abschnitt. Daher wurde der Extrusionsprozess optimiert, um ein komplett amorphes Extrudat zu erhalten. Parallel wurden die Solid Dispersions per DVS auf ihre Hygroskopizität hin getestet. Kollidon VA64 zeigte die geringste Wasseraufnahme. Zusätzlich ist das Polymer laut Hersteller temperaturstabil bis ungefähr 230 °C. Die Prozesstemperatur wurde mittels Hot Stage-Pulverdiffraktometrie (XRPD) bestimmt, indem eine physikalische Mischung erhitzt wurde und dabei jeweils XRP-Diffraktogramme erstellt wurden, bis bei 230 °C keine kristallinen Signale mehr beobachtbar waren. Diese Temperatur lieferte auch auf dem im Labormassstab arbeitenden Extruder komplett amorphes Material. Die minimale Extrusionstemperatur betrug 220 °C ohne Nicotinamid und 200 °C mit 9% Nicotinamid. Höhere Nicotinamidanteile reduzierten die minimale Extrusionstemperatur nicht weiter, kleinere Anteile erhöhten sie jedoch. Die um 20 °C reduzierte Prozesstemperatur senkte den Anteil von Abbauprodukten von 3.5% ohne Nicotinamid auf 1.1% mit Nicotinamid. Der Wechsel auf einen grösseren Extruder mit variablem Schraubendesign und verschiedenen Temperaturzonen ermöglichte grössere Scherkräfte, was tiefere Prozesstemperaturen ohne kristalline Anteile im Extrudat erlaubte. 195 °C waren mit 9% Nicotinamid nötig, 205 °C ohne. Beide Extrudate zeigten unter 0.5% Abbauprodukte. Dies machte den Gebrauch von Nicotinamid obsolet. Die Extrudate vom grösseren Extruder zeigten Dissolutionsergebnisse, welche identisch mit den lyophilisierten aus den Rattenstudien waren. Diese waren somit besser als die kristallinen Extrudate oder die HPMC-basierte 20% beladene Solid Dispersion. Das gute Abschneiden im in vitro-Test bestätigte sich in einer Hundestudie. Die Exposition der Kollidon basierten Extrudate war mit der PK des HPMC-Systems vergleichbar. Die Stabilität der beiden extrudierten Varianten wurde in einem Stabilitätstest unter Stressbedingungen verifiziert. Keines der Systeme zeigte physikalische Instabilitäten, und die Annahme, dass Beladungen von Systemen unterhalb ihrer maximalen Mischbarkeit physikalisch stabil sind, wurde für den gewählten Zeitraum von 3 Monaten auch unter Stressbedingungen bestätigt. Dies zeigt, dass eine rationale Entwicklung einer Solid Dispersion in einem finalen Produkt resultiert, welches die biopharmazeutischen Ansprüche ebenso erfüllt wie jene bezüglich der physikalischen Stabilität. KW - Arzneimittel KW - Ionic Liquids KW - solid dispersion KW - lowering lattice forces KW - poorly water soluble drugs KW - oral bioavailability KW - Löslichkeit KW - Bioverfügbarkeit Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126232 ER - TY - THES A1 - Balk, Anja T1 - Ionic liquids of active pharmaceutical ingredients: A novel platform addressing solubility challenges of poorly water soluble drugs T1 - Ionische Flüssigkeiten von Arzneistoffen: Ein neues Konzept für Löslichkeitsprobleme von schwer wasserlöslichen Wirkstoffen N2 - Starting in the late 1990s ionic liquids (ILs) gained momentum both in academia as well as industry. ILs are defined as organic salts with a melting point below 100 °C. Active pharmaceutical ingredients (APIs) may be transferred into ILs by creating salts with a bulky counterion with a soft electron density. ILs have demonstrated the potential to tune important pharmaceutical features such as the solubility and the dissolution rate, particularly addressing the challenge of poor water soluble drugs (PWSD). Due to the tunability of ILs, modification of physico-chemical properties of APIs may be envisioned without any modifications of the chemical structure. In the first chapter the potential as well as the limitation of ILs are discussed. The chapter commences with an overview of preparation and characterization of API-ILs. Moreover, examples for pharmaceutical parameters are presented which may be affected by IL formation, including the dissolution rate, kinetic solubility or hygroscopicity as well as biopharmaceutical performance and toxicology. The impact of IL formation on those pharmaceutically relevant features is highlighted, resulting in a blueprint for a novel formulation concept to overcome PWSD challenges without the need for structural changes of the API. Within the second chapter the IL concept is detailed for one specific API - counterion combination. A poorly water soluble acidic API against migraine attacks was transformed into an IL in an effort to minimize the time to maximum plasma concentration (tmax) and optimize the overall bioavailability. These studies were conducted in parallel to a prodrug of the API for comparison of the IL strategy versus a strategy involving modification of the API’s structure. A significantly longer duration of API supersaturation and a 700 fold faster dissolution rate of the IL in comparison to the free acid were obtained and the underlying mechanism was elucidated. The transepithelial absorption was determined using Caco-2 cell layers. For the IL about 3 times more substance was transported in comparison to the prodrug when substances were applied as suspensions, despite the higher permeability of the prodrug, as increased solubility of the IL exceeded this effect. Cytotoxicity of the counterion was assessed in hepatic, renal and macrophage cell lines, respectively, and IC50 values were in the upper µM / lower mM range. The outcome of the study suggested the IL approach instrumental for tuning biopharmaceutical properties, without structural changes of the API as required for preparation of prodrugs. Thus the toolbox for formulation strategies of poorly water soluble drugs could be extended by an efficient concept. The third chapter focuses on the effect of different counterions on the physico-chemical properties of an API-IL, in particular to overcome the challenge of poor water solubility. Therefore, the same poorly water soluble acidic API against migraine attacks mentioned above was combined with 36 counterions resulting in ILs and low lattice enthalpy salts (LLES). Depending on the counterions, different dissolution rates, durations of supersaturation and hygroscopicities were obtained and release profiles could be tailored from immediate to sustained release. Besides, in vitro the cytotoxicity of the counterions was assessed in three cell lines. Using molecular descriptors such as the number of hydrophobic atoms, the graph theoretical diameter and the number of positive charges of the counterion, the dissolution rate, supersaturation and hygroscopicity as well as the cytotoxicity of counterions could be adequately modeled, rendering it possible to predict properties of new LLESs. Within the forth chapter different poorly water soluble APIs were combined with the counterion tetrabutylphosphonium (TBP) studying the impact on the pharmaceutical and physical properties of the APIs. TBP-ILs and low lattice enthalpy salts were prepared of the acidic APIs Diclofenac, Ibuprofen, Ketoprofen, Naproxen, Sulfadiazine, Sulfamethoxazole and Tolbutamide. NMR and IR spectroscopy, DSC, XRPD, DVS and dissolution rate measurements, release profiles and saturation concentration measurements were used to characterize the free acids and TBP salts as compared to the corresponding sodium salts. The TBP salts as compared to the free acids displayed lower melting points and glass transition temperatures and up to 1000 times higher dissolution rates. The increase in the dissolution rate directly correlated with the salts’ hygroscopicity, an aspect which is critically discussed in terms of pharmaceutical translation challenges. In summary TBP ILs of solid salts were proved instrumental to approach the challenge of poor water solubility. The outcome profiled tailor-made counterions as a powerful formulation strategy to address poor water solubility, hence bioavailability and ultimately therapeutic potential of challenging APIs. In summary, a plethora of ILs and LLESs were prepared by combination of different acidic APIs and counterions. The IL and LLESs concept was compared to conventional salt and prodrug strategies. By choice of the counterion, biopharmaceutical relevant parameters were deliberately modified and release profiles were tuned ranging from immediate to prolonged release. The impact of distinct structural counterion features controlling the dissolution, supersaturation, hygroscopicity and counterion cytotoxicity were identified, correlations were presented and predictive models were built. ILs and LLESs could be proven to be a powerful concept for the formulation of poorly water soluble acidic APIs. N2 - Seit etwa 1990 haben Ionische Flüssigkeiten (IL) großes Interesse sowohl in der universitären als auch in der industriellen Forschung geweckt. ILs werden als organische Salze definiert, die einen Schmelzpunkt von unter 100 °C aufweisen. Arzneistoffe können in ILs umgewandelt werden, indem man Salze herstellt, mit einem voluminösen Gegenion mit delokalisierter Elektronendichte. ILs ermöglichen es wichtige pharmazeutische Eigenschaften wie Löslichkeit und Auflösungsgeschwindigkeit bewusst zu verändern, und im Besonderen stellen sie eine Möglichkeit dar, die Herausforderung, die schwer wasserlösliche Arzneistoffe mit sich bringen, zu bewältigen. Aufgrund der Variabilität von ILs, wird die Anpassung von physikochemischen Eigenschaften von Wirkstoffen denkbar, ohne die chemische Struktur des Stoffes zu modifizieren. Im ersten Kapitel werden die Potentiale aber auch die Grenzen von ILs dargestellt. Zu Beginn des Kapitels wird eine Übersicht über die Herstellung und Charakterisierung von ILs gegeben. Des Weiteren werden pharmazeutisch relevante Parameter gezeigt, die durch die IL Herstellung beeinflusst werden können, wie beispielsweise die Auflösungsgeschwindigkeit, die kinetische Löslichkeit oder die Hygroskopizität. Daneben können biopharmazeutische Größen und die Toxizität modifiziert werden. Der Einfluss der IL Bildung auf diese pharmazeutisch relevanten Parameter wird zusammengefasst und ein Formulierungskonzept aufgezeigt, um die schlechte Wasserlöslichkeit von Arzneistoffen zu überwinden ohne den Wirkstoff strukturell zu verändern. Im zweiten Kapitel wird das IL Konzept für eine spezifische Wirkstoff-Gegenion Kombination gezeigt. Ein schwer wasserlöslicher Arzneistoff gegen Migräne wird in ein IL umgewandelt, um eine schnellere und bessere Bioverfügbarkeit im Vergleich zu einem Prodrug zu erreichen. Eine signifikant verlängerte Übersättigung des Wirkstoffes und eine 700-fach schnellere Auflösung des ILs im Vergleich zur freien Säure wurden gemessen und der zugrunde liegende Mechanismus aufgeklärt. Die transepitheliale Aufnahme wurde anhand von Caco-2 Zellen untersucht. Vom IL wurde 3mal mehr Substanz transportiert als von dem Prodrug, wenn Suspensionen der Substanzen appliziert wurden und dies trotz der höheren Permeabilität des Prodrugs, da die verbesserte Löslichkeit des ILs hier überwog. Die Zytotoxizität des Gegenions wurde in einer Leber- und einer Nierenzellinie und in Makrophagen getestet und die IC50 Werte lagen im oberen µM- und unteren mM-Bereich. Die Ergebnisse der Untersuchungen legen dar, dass das IL Konzept hilfreich sein kann, um biopharmazeutische Eigenschaften zu variieren, ohne strukturelle Veränderung des Arzneistoffes, wie es für ein Prodrug nötig ist. Entsprechend konnten die Strategien, um schwer wasserlösliche Arzneistoffe zu formulieren, um ein neues und effizientes Konzept ergänzt werden. Der Fokus des dritten Kapitels liegt auf dem Einfluss von verschiedenen Gegenionen auf die physikochemischen Eigenschaften von Arzneistoff-ILs, insbesondere um Probleme aufgrund von schlechter Wasserlöslichkeit zu lösen. Dazu wurde der bereits im zweiten Kapitel genannte, saure und schwer wasserlösliche Arzneistoff gegen Migräne mit 36 Gegenionen kombiniert, wodurch ILs und Salze mit einer geringen Gitterenthalpie (LLES) erhalten wurden. In Abhängigkeit vom Gegenion wurden verschiedene Auflösungsgeschwindigkeiten, Übersättigungsdauern und Hygroskopizitäten erhalten. Durch Verändern des Gegenions konnte sowohl eine sofortige als auch verzögerte Freisetzung des Arzneistoffs erreicht werden. Daneben wurde in vitro die Zytotoxizität in drei Zelllinien bestimmt. Mittels zwei-dimensionaler Deskriptoren, wie der Anzahl der hydrophoben Atomen, dem graphentheoretischen Durchmesser und der Anzahl an positiven Ladungen des Gegenions, konnten die Auflösungsgeschwindigkeit, die Übersättigung und die Hygroskopizität sowie die Zytotoxizität des Gegenions berechnet werden, wodurch es gleichzeitig möglich wird, diese Eigenschaften für neue LLES vorherzusagen. Im vierten Kapitel werden verschiedene schwer wasserlösliche Arzneistoffe mit dem Gegenion Tetrabutylphosphonium (TBP) kombiniert und der Einfluss auf die pharmazeutischen und physikochemischen Eigenschaften des Wirkstoffes untersucht. TBP-ILs und Salze mit niedrigem Schmelzpunkt wurden von den sauren Arzneistoffen Diclofenac, Ibuprofen, Ketoprofen, Naproxen, Sulfadiazin, Sulfamethoxazol und Tolbutamid hergestellt. NMR- und IR-Spektroskopie, DSC, XRPD, DVS und Auflösungsgeschwindigkeitsmessungen wurden verwendet, um die freien Säuren und die TBP-Salze im Vergleich zu den entsprechenden Natrium-Salzen zu untersuchen. Die TBP-Salze zeigten im Vergleich zu den freien Säuren niedrigere Schmelzpunkte und Glasübergangstemperaturen und eine bis zu 1000-fach schnellere Auflösungsgeschwindigkeit. Ein Nachteil der Salze, die eine schneller Auflösungsrate zeigten, war die damit einhergehende erhöhte Hygroskopizität. Zusammenfassend lässt sich sagen, dass die Herstellung von flüssigen und festen TBP-Salzen hilfreich sein kann, um die Wasserlöslichkeit von Arzneistoffen zu verbessern. Die Untersuchungen lassen den Schluss zu, dass durch maßgeschneiderte Gegenionen neue Formulierungsstrategien für schlecht wasserlösliche Arzneistoffe zugänglich werden, wodurch die Bioverfügbarkeit und der therapeutische Nutzen optimiert werden kann. Insgesamt wurde eine Vielzahl von ILs und LLESs durch die Kombination von verschiedenen sauren Arzneistoffen und Gegenionen hergestellt. Das IL- und LLES-Konzept wurde mit der klassischen Salz– und Prodrug-Strategie verglichen. Durch die Wahl des Gegenions konnten biopharmazeutisch Parameter bewusst verändert werden und die Freisetzungsprofile von sofortiger bis hin zu verzögerter Freisetzung gewählt werden. Die strukturellen Merkmale der Gegenionen, die entscheidend für die Auflösungsgeschwindigkeit, die Übersättigung, die Hygroskopizität und die Gegenionen-Zytotoxizität waren, konnten gezeigt werden und Berechnungen dazu wurden präsentiert. Abschließend lässt sich sagen, dass die Herstellung von ILs und LLESs ein wirkungsvolles Konzept ist, um schwer wasserlösliche, saure Arzneistoffe zu formulieren. KW - Arzneimittel KW - Wirkstofffreisetzung KW - Löslichkeit KW - Salz KW - Ionic Liquids KW - Poorly water soluble drugs KW - Active pharmaceutical ingredients KW - Supersaturation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121925 ER - TY - THES A1 - Hebron Mwalwisi, Yonah T1 - Assessment of Counterfeit and Substandard Antimalarial Medicines using High Performance Thin Layer Chromatography and High Performance Liquid Chromatography T1 - Untersuchung der Qualität gefälschter Antimalaria-Medikamente mittels Hochleistungs-Dünnschichtchromatographie und Hochleistungs-Flüssigchromatographie N2 - Although the prevalence of substandard and counterfeit pharmaceutical products is a global problem, it is more critical in resource-constrained countries. The national medicines regulatory authorities (MNRA) in these countries have limited resources to cater for regular quality surveillance programmes aimed at ensuring that medicines in circulation are of acceptable quality. Among the reasons explained to hinder the implementation of these strategies is that compendial monographs are too complicated and require expensive infrastructures in terms of environment, equipment and consumables. In this study it was therefore aimed at developing simple, precise, and robust HPLC and HPTLC methods utilizing inexpensive, readily available chemicals (methanol and simple buffers) that can determine the APIs, other API than declared one, and which are capable of impurity profiling. As an outcome of this study, three isocratic and robust HPLC and two HPTLC methods for sulfadoxine, sulfalene, pyrimethamine, primaquine, artesunate, as well as amodiaquine have been developed and validated. All HPLC methods are operated using an isocratic elution mode which means they can be implemented even with a single pump HPLC system and standard C18 columns. The densitometric sulfadoxine/sulfalene and pyrimethamine method utilizes standard TLC plates as well as inexpensive, readily available and safe chemicals (toluene, methanol, and ethyl acetate), while that for artesunate and amodiaquine requires HPTLC plates as well as triethylamine and acetonitrile due to challenges associated with the analysis of amodiaquine and poorly the detectable artesunate. These HPTLC methods can be implemented as alternative to those requiring HPLC equipment e.g. in countries that already have acquired densitometer equipment. It is understood that HPTLC methods are less sensitive, precise and accurate when compared to HPLC methods, but this hindrance can easily be addressed by sending representative samples to third party quality control laboratories where the analytical results are verified using compendial HPLC methods on a regular basis. It is therefore anticipated that the implementation of these methods will not only address the problem of limited resources required for medicines quality control but also increase the number of monitored targeted antimalarial products as well as the number of resource- constrained countries participating in quality monitoring campaigns. Moreover, the experiences and skills acquired within this work will be applied to other API groups, e. g. antibiotics, afterwards. N2 - Trotz der weltweiten Verbreitung gefälschter Arzneimittel und solcher, die nicht die deklarierte Menge an Wirkstoff enthalten, sind vor allem Entwicklungs- und Schwellenländer von dieser Problematik betroffen. Die Arzneimittelüberwachungs- bzw. Zulassungsbehörden dieser Länder verfügen nur über eingeschränkte Möglichkeiten, die Arzneimittelqualität regelmäßig zu überwachen und somit sicherzustellen, dass die im Markt befindlichen Medikamente eine gute Qualität aufweisen. Einer der Gründe hierfür ist unter anderem, dass die in Arzneibüchern beschriebenen Methoden oftmals sehr komplex sind und eine umfassende Laborausstattung, spezielle Geräte oder teure Chemikalien benötigen. In dieser Arbeit wurden einfache, genaue und robuste flüssigchromatographische Methoden entwickelt, die lediglich günstige, überall verfügbare Chemikalien (z. B. Methanol oder einfache Puffersalze) benötigen und mit denen der Gehalt des deklarierten Arzneistoffes, Arzneistoffverwechslungen sowie das Verunreinigungsprofil bestimmt werden kann. Es konnten drei isokratische, robuste flüssigchromatographische sowie zwei dünnschichtchromatographische Methoden zur Bestimmung von Sulfadoxin, Sulfalen, Pyrimethamin, Primaquin, Artesunat sowie Amodiaquin entwickelt und validiert werden. Alle flüssigchromatographischen Methoden arbeiten isokratisch, folglich können sie auch mit sehr einfachen HPLC-Geräten mit beispielsweise nur einem Pumpenkopf genutzt werden. Zudem werden nur einfache, kommerziell erhältliche C18-Säulen benötigt. Die densitometrischen Methoden für Sulfadoxin/Sulfalen sowie Pyrimethamin benötigen standardisierte Dünnschichtchromatographie-Platten sowie günstige, überall verfügbare und wenig toxische Chemikalien wie beispielsweise Toluol, Methanol oder Ethylacetat. Für die Methode zur Bestimmung von Artesunat und Amodiaquin werden Hochleistungsdünnschichtchromatographie-Platten und Triethylamin sowie Acetonitril benötigt. Dieser Umstand ist der Tatsache geschuldet, dass Amodiaquin und Artesunat sich anderweitig nur ungenügend trennen ließen. Die dünnschichtchromatographischen Protokolle können als Alternative zur HPLC eingesetzt werden, beispielsweise überall dort, wo bereits die entsprechenden Gerätschaften vorhanden sind. Natürlich weisen dünnschichtchromatographische Methoden im Vergleich zur Flüssigchromatographie eine geringere Sensitivität, Präzision und Richtigkeit auf, dies kann jedoch dadurch umgangen werden, die entsprechenden Methoden nur zum Screening zu verwenden und die zu analysierenden Proben anderweitig, z. B. in externen Laboratorien, detailliert zu untersuchen. Dort können beispielsweise Methoden aus gängigen Arzneibüchern verwendet werden. Durch die Implementierung der neu entwickelten Methoden kann zum einen das Problem schlecht verfügbarer Chemikalien umgangen werden und gleichzeitig die Anzahl an untersuchten Arzneimitteln erhöht werden. Dies ist ein wichtiger Beitrag zur Qualitätskontrolle in Ländern mit eingeschränkten Infrastrukturen. KW - Instrumentelle Analytik KW - Arzneimittel KW - Fälschung KW - Malaria KW - HPLC KW - Counterfeit Medicines KW - HPLC KW - Pharmaceutical Analysis KW - Impurity Profiling Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-145821 ER -