TY - THES A1 - Schwegmann, Michael T1 - Eine molekulare Fliegenfalle zur Erkennung von biologisch relevanten (poly)-anionischen Substraten T1 - a molecular flytrap for the recognition of biologically relevant (poly)-anionic substrates N2 - Im Rahmen dieser Arbeit konnte ein multivalenter Rezeptor auf Basis von Guanidiniocarbonylpyrrolen zur Komplexierung von biologisch relevanten (poly)- anionischen Substraten wie Citrat, Malat und Tatrat dargestellt werden. Der Rezeptor bindet Citrat selbst in Gegenwart eines 1000fachen Überschusses an NaCl und einem 10fachen Überschuss an Bis-tris Puffer mit einer hohen Bindungskonstante von KAss = 86000 M-1 in Wasser. Wenn man Rezeptoren auf Metall- und Boronsäurebasis nicht berücksichtigt, handelt es sich nach meinem Wissen um den besten Citrat-Rezeptor, der in der Literatur bisher publiziert ist. Außerdem zeigt der Rezeptor mit einem Faktor von mindestens 8 eine hohe Selektivität für Citrat gegenüber anderen biologisch relevanten Dicarboxylaten wie Malat und Tatrat. Mithilfe von Bindungsstudien und Molecular Modeling Rechnungen konnte hergeleitet werden, welchen Einfluss die verschiedenen nicht-kovalenten Wechselwirkungen auf die Bindungskonstante haben. Dabei konnte gezeigt werden, dass Flexibilität, Hydroxy-Funktionen, pi-Stacking und Symmetrie bei den Substraten Einfluss auf die Bindungskonstanten zeigen, wobei vor allem die unpolaren Wechselwirkungen und die zusätzliche Hydroxy-Funktionen einen hohen Anteil an der Bindung zu haben scheinen. Neben der selektiven Erkennung von Citrat durch den Rezeptor konnte zusätzlich ein Sensorsystem mit Carboxyfluorescein auf Basis eines indicator displacement assays entwickelt werden, mit dem die Anwesenheit von Citrat im Gegensatz zu anderen Carboxylaten mit dem bloßen Auge (naked eye) erkannt werden kann. Neben den Polycarboxylaten zeigt der Rezeptor außerdem noch hohe Bindungskonstanten für polyanionische Zucker. So konnten z.B. für Glucophosphate mit UV-Spektroskopie Bindungskonstanten von KAss = ca. 20000 M-1 in dem sehr polaren Lösemittelgemisch 10 % DMSO/Wasser (pH = 4, Acetat-Puffer) gefunden werden. N2 - In the course of this work a multivalent receptor based on guanidiniocarbonyl-pyrrolcations for the complexation of biologically relevant (poly)-anionic substrates like citrate, malate or tatrate was synthesised. The receptor binds citrate in the presence of a 1000fold excess of NaCl and a 10fold excess of bis-tris buffer with a high binding constant of KAss = 86000 M-1 in water. To the best of my knowledge is hence the most efficient receptor for the binding of citrate in water reported so far, if receptors on metall- and boronic acid-basis are neglected. Furthermore receptor shows a high selectivity with a factor of at least 8 for citrate against other biologically relevant dicarboxylates like malate or tartrate. With the aid of binding studies and molecular modeling calculations could be determined, which influence the different non covalent interactions have on the binding constant. It was demonstrated in this way, that flexibility, hydroxyfunctions,pi-stacking and symmetry of the substrates have a major influence on the binding constant. Especially unpolar interactions and interactions with the hydroxy group seem to play a major role in the binding mode. In addition to the selective recognition of citrate with the receptor a sensor system with carboxyfluoresceine based on an indicator displacement assay (ida) could be developed. With this ida it was possible to detect citrate in contrast to other biologically relevant substrates with the naked eye. Furthermore the receptor showed high binding constants for anionic sugars. In a solvent mixture of 10 % DMSO/Water (pH = 4, acetate buffer) bindings constants of KAss = ca. 20000 M-1 were measured for the glucophosphates. KW - Supramolekulare Chemie KW - Rezeptor KW - Molekulare Erkennung KW - Molekulare Erkennung KW - Supramolekulare Chemie KW - Bioorganische Chemie KW - molecular recognition KW - supramolecular chemistry KW - bioorganic chemistry Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-17829 ER - TY - THES A1 - Bickert, Volker T1 - Neue künstliche Guanidiniocarbonylpyrrol-Rezeptoren zur Komplexierung von Oxo-Anionen in Wasser T1 - New artificial Guanidiniocarbonyl Pyrrole Receptors for the Complexation of Oxo-Anions in Water N2 - Ziel der Dissertation „Neue künstliche Guanidiniocarbonylpyrrol-Rezeptoren zur Komplexierung von Oxo-Anionen in Wasser“ war die Weiterentwicklung dieser Rezeptoren nach Schmuck für die Komplexierung insbesondere von Carboxylaten, um sie hinsichtlich Bindungsaffinität und Substratspezifität zu optimieren. Dazu wurde zunächst die Synthese zweier wichtiger Grundbausteine in einzelnen Schritten vollständig überarbeitet, wobei veränderte Reaktionsbedingungen und Aufarbeitungsschritte zu gesteigerten Ausbeuten führten. Dadurch ist es nun möglich, diese Bausteine effizienter zu synthetisieren und im Multigramm-Maßstab für die Darstellung von Rezeptoren zur Oxo-Anionen-Erkennung einzusetzen. Weiterhin wurde die Verbesserung der Komplexierungseigenschaften gegenüber Carboxylaten auf zwei Arten untersucht: zum einen durch das Anbringen eines zusätzlichen Seitenarms an der Guanidinio-Einheit zur Bildung von Guanidiniocarbonylpyrrol-Tweezer-Rezeptoren, zum anderen durch das Einführen einer zweiten positiven Ladung neben der Carboxylat-Bindungsstelle (CBS) zur Darstellung biskationischer Guanidiniocarbonylpyrrol-Rezeptoren. Zur Darstellung von Tweezer-Rezeptoren wurde ein zusätzlicher Seitenarm an der N’-Position der Guanidinio-Einheit angebracht. Die beiden Arme sollten ein Substrat pinzettenartig von zwei Seiten, mit der CBS als Kopfgruppe, komplexieren können. Durch zusätzliche Wechselwirkungen des neuen Seitenarms sollte neben einer stärkeren Komplexierung vor allem eine höhere Substratspezifität erzielt werden. Die experimentell ermittelten Bindungskonstanten lagen allerdings im Bereich der N’-unsubstituierten Rezeptoren. Somit stellen die Tweezer-Modifikationen daher keine Verbesserung der Guanidiniocarbonylpyrrol-Rezeptoren dar. In einem weiteren Projekt zur Rezeptor-Optimierung wurden, durch Einführung einer zweiten positiven Ladung in Form einer terminalen Ammonium-Gruppe, biskationische Guanidiniocarbonylpyrrol-Rezeptoren erfolgreich synthetisiert. Die Komplexierungseigenschaften dieser biskationischen Rezeptoren wurden in Bindungsstudien vornehmlich mit Aminosäurecarboxylaten mittels UV- und Fluoreszenz-Spektroskopie, Massenspektrometrie, NMR-Spektroskopie, ITC und Molecular Modeling Berechnungen untersucht. Anhand der Substratspezifität der biskationischen Rezeptoren wurde deutlich, dass die Spacerlänge, an der die zusätzliche positive Ladung angebracht ist, eine entscheidende Rolle bei der Komplexierung spielte. Galten eigentlich starre, präorganisierte, kurze Linker als vorteilhaft hinsichtlich der Entropie, so ist hier zu erkennen, dass längere, flexiblere Linker zu einer besseren Komplexierung führen können, wenn geeignete zusätzliche nichtkovalente Wechselwirkungen möglich sind. Die biskationischen Rezeptoren stellen damit eine Optimierung des Carboxylat-Bindungsmotivs der Guanidiniocarbonylpyrrol-Rezeptoren nach Schmuck in der Anionen-Erkennung dar. N2 - The main focus of the thesis “New artificial guanidiniocarbonyl pyrrole receptors for the complexation of oxo-anions in water” is the optimization of these receptors introduced by Schmuck for the oxo-anion recognition, especially carboxylates, in aqueous solution. Therefore, the details of the synthesis of two important building blocks were completely revised and yields increased by changing reaction conditions, workup and isolation steps. The new optimized, facile and efficient synthetic route to these N-protected guanidinocarbonyl pyrrole derivatives allows now a multi-gram synthesis of these versatile compounds as needed for the synthesis for a variety of supramolecular anion binding motifs. Furthermore two strategies to optimize the anion recognition have been pursued: On the one hand tweezer receptors were developed by connecting an additional side chain to the head group at the N’-position of the guanidino group. On the other hand another second positive charge was introduced into the receptor besides the carboxylate binding site (CBS) by an ammonium group to get bis-cationic receptors The tweezer receptors were developed in order to complex the guest from more than one side. A second side chain, connected to the N’-position of the guanidinio motif, leads to this kind of receptor, with the CBS as a head group. By using additional non covalent interactions in both side chains, the association constant as well as the specificity should be increased. In case of the optimization of the binding properties, the tweezer receptors have showen binding properties similar to the N’-unsubstituted guanidiniocarbonyl pyrrole receptors with respect to association constants and specificity. For this reason the tweezer receptors were no improvement of the guanidiniocarbonyl pyrrole receptors. In another project for optimization of the binding properties several bis-cations were synthesized, with a simple primary ammonium cation attached via flexible linkers of varying length to a guanidiniocarbonyl pyrrole. In UV-binding studies in aqueous buffer these bis-cations have shown efficient binding of various N-acetyl amino acid carboxylates. Further investigations by fluorescence spectroscopy, mass spectrometry, NMR spectroscopy, ITC as well as molecular mechanics calculations confirm the complexation by participation of the second charge in the complexation of the carboxylic function and therefore an increasing in complex stability. It is generally assumed, that short and rigid linkers are better for complexation due to the entropy and that a steady decrease of a linker length increase the complex stability. However, this case shows, that complex stability can increase while increasing the flexibility of a linker until other non covalent interactions are possible. Hence, the bis-cationic receptors indeed represent an optimisation of the guanidiniocarbonyl pyrrole receptors for oxo-anion-binding. KW - Molekulare Erkennung KW - Anion KW - Wirkstoff-Rezeptor-Bindung KW - Ligand KW - Peptidsynthese KW - Chemische Synthese KW - Guanidinderivate KW - Oxo-Anionen-Erkennung KW - Guanidiniocarbonylpyrrol KW - nicht-kovalente Wechselwirkungen KW - Supramolekulare Chemie KW - Tweezer-Rezeptoren KW - oxo anion recognition KW - guanidiniocarbonyl pyrrole KW - non-covalent interactions KW - supramolecular chemistry KW - tweezer receptors Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32460 ER - TY - THES A1 - Kotzsch, Alexander T1 - BMP Ligand-Rezeptor-Komplexe: Molekulare Erkennung am Beispiel der Spezifischen Interaktion zwischen GDF-5 und BMPR-IB T1 - BMP ligand receptor complexes: Molecular recognition exemplified by the specific interaction between GDF-5 and BMPR-IB N2 - Knochenwachstumsfaktoren (Bone Morphogenetic Proteins, BMPs) sind ubiquitäre, sekretierte Proteine mit vielfältigen biologischen Funktionen. Die Vielfalt an zellulären Prozessen, die durch BMPs reguliert werden, von der Knochenentwicklung und Organhomöostase bis hin zur Neurogenese, erstaunt – und wirft angesichts von teils redundanten, teils spezifischen Funktionen der BMPs Fragen zu den Mechanismen ihrer Signalübermittlung auf. Die Signaltransduktion von BMPs erfolgt wie bei den strukturell verwandten TGF-βs und Activinen durch die ligandeninduzierte Oligomerisierung von transmembranen Serin/Threonin-Kinaserezeptoren, von denen zwei Typen – Typ I und Typ II – existieren. Einer Vielzahl von mehr als 18 BMP-Liganden stehen nach derzeitigem Erkenntnisstand nur vier Typ I und drei Typ II Rezeptorsubtypen für die Bildung von heteromeren Rezeptorkomplexen zur Verfügung. Ein BMP-Ligand kann hochspezifisch nur einen bestimmten Rezeptorsubtyp oder in einer promisken Art und Weise mehrere Rezeptorsubtypen binden. Trotz dieser Bindungspromiskuität üben BMPs ihre biologische Funktion überwiegend hochspezifisch aus, d.h. abhängig vom Liganden werden spezifische zelluläre Prozesse reguliert. Somit stellt sich die Frage, wie die Bildung von heteromeren Ligand-Rezeptor-Komplexen und die Aktivierung definierter intrazellulärer Signalkaskaden zusammenhängen und wie letztlich ein bestimmtes BMP-Signal durch einen „Flaschenhals“, repräsentiert durch die begrenzte Anzahl an Rezeptorsubtypen, in das Zellinnere übermittelt wird. Die Interaktionen zwischen BMP-2 / GDF-5 und den Typ I Rezeptoren BMPR-IA / BMPR-IB sind ein Paradebeispiel für Bindungspromiskuität und -spezifität. Während BMP-2 beide Rezeptoren BMPR-IA und BMPR-IB mit gleicher Bindungsaffinität bindet („promiske Interaktion“), zeigt GDF-5 eine 15-20fach höhere Bindungsaffinität zu BMPR-IB („spezifische“ Interaktion). Dieser Unterschied ist scheinbar gering, aber physiologisch überaus relevant. Um Einblick in die Mechanismen der molekularen Erkennung zwischen den Bindungspartnern zu gewinnen, wurden binäre und ternäre Komplexe aus den Liganden BMP-2 oder GDF-5, den extrazellulären Domänen der Typ I Rezeptoren BMPR-IA oder BMPR-IB sowie der extrazellulären Domäne des Typ II Rezeptors ActR-IIB untersucht. Die hier vorliegende Arbeit beschreibt die strukturelle und funktionelle Analyse dieser Ligand-Rezeptor-Komplexe. Um den Einfluss struktureller Flexibilität auf die BMP Typ I Rezeptor Erkennung näher zu analysieren, wurde zudem die Struktur von BMPRIA in freiem Zustand mittels NMR-Spektroskopie aufgeklärt. Aus Mutagenesedaten und der Kristallstruktur des GDF-5•BMPR-IB-Komplexes lassen sich im Vergleich zu bekannten Kristallstrukturen Merkmale ableiten, mit denen die Ligand-Rezeptor-Bindung und -Erkennung charakterisiert werden kann: (1) Die Hauptbindungsdeterminanten in Komplexen von BMPR-IA und BMPR-IB mit ihren Liganden sind unterschiedlich. Während in Komplexen mit BMPR-IB ein hydrophobes Motiv die Bindungsaffinität bestimmt, trägt in Komplexen mit BMPR-IA eine polare Interaktion signifikant zur Bindungsenergie bei. Ein Vergleich der Strukturen von freien und gebundenen Liganden und Typ I Rezeptoren zeigt, dass interessanterweise diese Hauptbindemotive erst bei der Ligand-Rezeptor-Interaktion entstehen, sodass ein „induced fit“ vorliegt und die Moleküle entsprechend „aufeinander falten“. (2) Die Bindungsspezifität wird durch periphere Schleifen in den Typ I Rezeptoren bestimmt. Wie Untersuchungen von Punktmutationen in BMPR-IA zeigen, die einer krebsartigen Darmerkrankung (Juvenile Polyposis) zugrunde liegen, führt erst die „richtige“ Kombination aus Flexibilität in den Schleifen und Rigidität des Rezeptorgrundgerüsts zu signalaktiven Typ I Rezeptoren mit einer potentiell den Liganden komplementären Oberfläche. Die mangelnde sterische Komplementarität von Ligand- und Rezeptoroberflächen führt zu der niedrigeren Bindungsaffinität von GDF-5 zu BMPR-IA im Vergleich zu BMPR-IB. Interessanterweise zeigen die hier vorgestellten, hochaufgelösten Strukturdaten, dass die Orientierungen/Positionen der Typ I Rezeptoren BMPR-IA und BMPR-IB in den Bindeepitopen der Liganden BMP-2 und GDF-5 variieren. Unter der Voraussetzung, dass die extrazelluläre Domäne, das Transmembransegment und die intrazelluläre Domäne der Typ I Rezeptoren ein starres Element bilden, sollte sich die unterschiedliche Orientierung der extrazellulären Domänen der Typ I Rezeptoren in der Anordnung der Kinasedomänen widerspiegeln und sich auf die Signaltransduktion auswirken. Möglicherweise ist eine bestimmte Anordnung der Kinasedomänen der Typ I und Typ II Rezeptoren für eine effiziente Phosphorylierung bzw. Signaltransduktion erforderlich. Der Vergleich mehrerer Ligand-Typ I Rezeptor-Komplexe zeigt, dass die unterschiedliche Orientierung dieser Rezeptoren möglicherweise vom Liganden abhängt. Angesichts der Bindungspromiskuität unter BMP-Liganden und -Rezeptoren könnten so spezifische Signale übermittelt und spezifische biologische Funktionen reguliert werden. Die in dieser Arbeit vorgestellten Erkenntnisse tragen wesentlich zur strukturellen Charakterisierung der Ligand-Rezeptor-Erkennung in der BMP-Familie bei. Die Frage, warum trotz strukturell hoch homologer Liganden und Rezeptoren und weitgehend konservierten Bindeepitopen eine teils promiske und teils spezifische Interaktion möglich ist, kann nun für die Liganden BMP-2 und GDF-5 sowie den beiden Typ I Rezeptoren BMPR-IA und BMPR-IB beantwortet werden. N2 - Bone morphogenetic proteins (BMPs) are ubiquitous, secreted cytokines involved in a manifold of biological functions. The diversity of cellular processes regulated by BMPs, from bone development to tissue homeostasis and neuronal processes, is amazing – and raises questions about the mechanisms of signal transduction in the light of redundant functions on the one hand, and specific functions on the other hand. Similar to structurally related activins and TGF-βs, the signal transduction of BMPs is accomplished by ligand-induced oligomerization of transmembrane BMP type I and type II serine/threonine receptor kinases. According to current knowledge, only four type I and three type II receptor subtypes are available for BMP signal transduction, facing a multitude of more than 18 BMP ligands. Binding of BMP ligands to their receptors can be highly specific meaning that only one specific receptor of either subtype is used for signaling. In contrast, many BMP ligands can recruit more than one receptor subtype, which results in binding promiscuity. However, even though receptor subtypes are bound in a promiscuous manner, only certain biological functions are triggered. Dependent on the BMP ligand, specific cellular processes are activated and regulated. This discrepancy between unspecific binding and specific signaling events and the biological response raises the question how the formation of heteromeric ligand-receptor complexes is linked to the activation of defined intracellular signaling cascades, and finally, how a certain BMP signal is transduced into the interior of the cell through a „bottleneck“ represented by the limited number of receptor subtypes. The interaction between BMP-2 / GDF-5 and the BMP type I receptors BMPR-IA / BMPR-IB is a prime example for binding promiscuity and binding specificity. BMP-2 binds BMPR-IA and BMPRIB with almost equal binding affinity („promiscuous interaction“) while GDF-5 exhibits a 15-20fold higher binding affinity to BMPR-IB („specific interaction“). Although this difference is seemingly small, it is however of considerable relevance for the physiological role of these ligands. To gain insight into the mechanisms of molecular recognition between the binding partners, binary and ternary ligand-receptor complexes consisting of BMP-2 or GDF-5, the extracellular domains of the type I receptors BMPR-IA or BMPR-IB, and the extracellular domain of the type II receptor ActRIIB were investigated. The thesis presented here describes the structural and functional analysis of these ligand-receptor complexes. To analyse the effect of structural flexibility on BMP type I receptor recognition in more detail, the structure of free BMPR-IA was determined using NMR spectroscopy. Based on data from a limited mutagenesis and the crystal structure of the GDF-5•BMPR-IB complex several characteristics concerning ligand-receptor binding and recognition can be deduced: (1) The main binding determinants in complexes of BMPR-IA and BMPR-IB with their ligands BMP-2 and GDF-5 differ. A hydrophobic binding motif determines binding affinity in complexes of BMPR-IB, whereas a polar interaction significantly contributes to binding energy in complexes of BMPR-IA. These main binding motifs are only formed during complex formation as demonstrated by a comparison between structures of free and bound ligands as well as type I receptors. Both ligand and receptor fold „onto each other“ which suggests an induced fit mechanism. (2) Binding specificity is encoded on loops at the periphery of the binding epitope of the type I receptors. Only the „appropriate“ combination between structural flexibility in the receptor loops and structural rigidity of the receptor backbone results in signal active type I receptors, as shown by analysis of single polymorphisms in BMPR-IA causing juvenile polyposis syndrome, a cancerous disease of the intestine. A lack of steric surface complementarity between GDF-5 and BMPR-IA, that cannot be overcome by structural flexibility, leads to the lower binding affinity in comparison to BMPR-IB. Interestingly, the high resolution structure of the GDF-5•BMPR-IB complex shows that the orientations/positions of BMPR-IA in the binding epitope of BMP-2 and of BMPR-IB in the binding epitope of GDF-5 vary. Assuming that the extracellular domain, the transmembrane segment, and the intracellular domain of the type I receptors form a rigid element, the different orientations of the extracellular domains should also reflect the assembly of the kinase domains and therefore, affect signal transduction. One can assume that a defined arrangement of the kinase domains of type I and type II receptors is required to allow for efficient phosphorylation and signal transduction, respectively. The comparison of several BMP ligand-type I receptor complexes suggests that the different orientations of these receptors are likely dependent on the ligand. Considering the binding promiscuity among BMP ligands and receptors such a mechanism would represent a possible way for the transmission of specific signals and regulation of specific biological functions. The insights into molecular structure and function of BMP ligands and receptors presented in this thesis contribute significantly to a more detailed understanding of their binding properties. The question why the interaction of BMP ligands and receptors is promiscuous on the one hand and specific on the other hand in spite of structurally highly homologous molecules can now be answered for BMP-2 and GDF-5 as well as BMPR-IA and BMPR-IB. KW - Cytokine KW - Knochen-Morphogenese-Proteine KW - Ligand KW - Proteinfaltung KW - Molekulare Erkennung KW - Rezeptor KW - Transforming Growth Factor beta KW - Wachstumsfaktor KW - Strukturaufklärung KW - Dreidimensionale NMR-Spektroskopie KW - Protein-Serin-Threonin-Ki KW - Proteinkristallographie KW - GDF-5 KW - BMPR-IB KW - Signaltransduktion KW - protein crystallography KW - molecular recognition KW - signal transduction KW - ligand KW - receptor Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-31040 ER - TY - THES A1 - Wich, Peter Richard T1 - Multifunctional Oligopeptides as an Artificial Toolkit for Molecular Recognition Events T1 - Multifunktionale Oligopeptide als künstlicher Werkzeugkasten für molekulare Erkennungsprozesse N2 - The main focus of this thesis was the synthesis and analysis of multifunctional oligopeptides. The study of their non-covalent interactions with various counterparts revealed interesting new results, leading to both methodological and application related progress. The first project of this thesis concentrated on the in-depth analysis of the peptide receptor CBS-Lys-Lys-Phe-NH2 to acquire a better understanding of its binding mode upon complexation with a substrate. In this context it was possible to develop—in cooperation with the group of Prof. Sebastian Schlücker—a direct and label free spectroscopic detection of immobilized compounds which are often found in combinatorial libraries. This new screening method utilizes the advantages of the surface enhanced Raman spectroscopy and allowed for the first time a surface mapping of a single polystyrene bead for the identification of peptides in femtomolar concentrations. Hence, this method allows a very fast and sensitive detection of resin bound compounds. The development of this promising new approach set the starting point for future experiments to enable on-bead library screenings and to investigate the complex formation of immobilized compounds. After the comprehensive analysis of the basic structural features of small peptide receptors in the first part of this thesis, the second big block focused on its in vitro evaluation using biological relevant targets. Therefore, several different modifications of the initial peptide structures were synthesized. These modifications provided a molecular toolkit for the tailor made synthesis of structures individually designed for the respective target. The first tests addressed the interaction with Alzheimer’s related amyloid fibrils. During these experiments, the successful SPPS syntheses of tri- and tetravalent systems were achieved. The comparison of the multivalent form with the corresponding monovalent version was then under special investigations. These concentrated mainly on the interaction with various bacteria strains, as well as with different parasites. To localize the compounds within the organisms, the synthesis of fluorescence labelled versions was achieved. In addition, several compounds were tested by the Institute for Molecular Infection Biology of the University of Würzburg for their antibacterial activity. This thorough evaluation of the biological activity generated precious information about the influence of small structural changes in the peptide receptors. Especially the distinct influence of the multivalency effect and the acquired synthetic skills led to the development of an advanced non-covalent recognition event, as described in the final project of this thesis. The last part of this thesis discussed the development of a novel inhibitor for the serine protease beta-tryptase based on a tailor-made surface recognition event. It was possible to study and analyze the complex interaction with the unique structure of tryptase, that features a tetrameric frame and four catalytic cleavage sites buried deep inside of the hollow structure. However, the point of attack were not the four binding pockets, as mostly described in the literature, but rather the acidic areas around the cleavage sites and at the two circular openings. These should attract peptides with basic residues, which then can block the accessibility to the active sites. A combinatorial library of 216 tetravalent peptide compounds was synthesized to find the best structural composition for the non-covalent inhibition of beta-tryptase. For the screening of the library a new on-bead assay was applied. With this method a simultaneous readout of the total inhibition of all library members was possible, thus allowing a fast and direct investigation of the still resin bound inhibitors. Several additional experiments in solution unveiled the kinetics of the inhibition process. In conclusion, both mono- and multivalent inhibitors interact in a non-destructive and reversible way with the tryptase. N2 - Der Hauptfokus dieser Arbeit lag in der Synthese und Analyse multifunktionaler Oligopeptide. Die Untersuchung ihrer nicht-kovalenten Wechselwirkungen mit verschiedenen Strukturen resultierte sowohl in interessanten methodischen als auch anwendungsbezogenen Fortschritten. Das erste Projekt dieser Dissertation konzentrierte sich auf die detaillierte Analyse des Peptid-Rezeptors CBS-Lys-Lys-Phe-NH2, um ein besseres Verständnis seines Bindungsverhaltens während einer Substratkomplexierung zu erhalten. In diesem Zusammenhang gelang in Kooperation mit der Gruppe von Prof. Sebastian Schlücker, die Entwicklung einer direkten und markierungsfreien spektroskopischen Methode zur Detektion festphasengebundener Substanzen, wie man sie z.B. oft in kombinatorischen Molekülbibliotheken findet. Diese neuartige Screeningmethode bedient sich der Vorteile der Oberflächen-verstärkten Raman-Streuung (SERS) und ermöglichte erstmals das Scannen der Oberfläche eines einzelnen Harz-Kügelchens und damit die Identifizierung von Peptiden in femtomolaren Konzentrationen. Zusammenfassend erlaubt diese neue Methode eine schnelle und hoch sensitive Detektion harzgebundener Substanzen. Die Entwicklung dieses viel versprechenden Ansatzes bildet die Basis möglicher zukünftiger Entwicklungen für das direkte und schnelle Screening von kombinatorischen Bibliotheken sowie für die detaillierte Untersuchung der Komplexbildung von immobilisierten Verbindungen. Nach der ausführlichen Analyse der grundlegenden strukturellen Eigenschaften kleiner Peptidrezeptoren im ersten Teil dieser Dissertation schloss sich im zweiten großen Block dessen in vitro Evaluierung mit Hilfe verschiedener biologisch relevanter Zielstrukturen an. Dazu wurden einige strukturell verwandte Versionen der ursprünglichen Rezeptoren synthetisiert. Dies ermöglichte die Zusammenstellung eines variablen molekularen Baukasten zur zielgerichteten Synthese von Strukturen, die individuell für ausgesuchte Ziele entworfen werden konnten. Die ersten Tests betrachteten die Wechselwirkung mit Amyloid-Fibrillen, die im Zusammenhang mit der Alzheimer-Krankheit stehen. Während dieser Arbeiten wurden erste tri- und tetravalente Rezeptorsysteme mit Hilfe der Festphasenchemie synthetisiert. In diesem Zusammenhang war insbesondere der Vergleich der multivalenten Systemen mit den entsprechenden monovalenten Peptiden von Interesse. Die Untersuchungen konzentrierten sich hauptsächlich auf die Interaktion mit verschiedenen Bakterienarten, sowie unterschiedlichen Parasiten. Um die Verbindungen in den Organismen zu lokalisieren wurden spezielle Fluoreszenz-markierte Versionen der Peptide synthetisiert. Zusätzlich wurden einige Verbindung vom Institut für Molekulare Infektionsbiologie der Universität Würzburg auf ihre antibakterielle Aktivität untersucht. Mit dieser detaillierten Evaluierung der biologischen Aktivität konnten somit wertvolle Informationen über den Einfluss kleiner struktureller Änderungen in den Peptidrezeptoren gewonnen werden. Insbesondere der ausgeprägte Einfluss des multivalenten Effektes und die angeeigneten synthetischen Fertigkeiten führten zur Entwicklung und Untersuchung eines komplexeren Bindungsereignisses. Der letzte Abschnitt dieser Dissertation beschreibt die Entwicklung eines neues Inhibitors der Serinprotease beta-Tryptase, welche eine tetramere Struktur aufweist, in der die vier aktiven Zentren sich im Inneren eines zentralen Hohlraumes befinden. In diesem Zusammenhang gelang es die zur Inhibierung notwendige Komplexbildung, die auf einem speziell zugeschnittenen Oberflächenerkennungsprozess basiert, zu studieren und analysieren. Die Angriffspunkte waren jedoch nicht die üblicherweise in der Literatur beschriebenen aktiven Zentren, sondern Anhäufungen negativ geladener Aminosäure-Reste, die in der Umgebung der aktiven Zentren sowie in den beiden Eingangsbereichen zum zentralen Hohlraum zu finden sind. Diese sollten in der Lage sein positiv geladene Aminosäurereste anzuziehen und dazu führen, dass ein entsprechend voluminöses Peptid die Zugänglichkeit zu den aktiven Zentren einschränkt. Daraufhin wurde eine kombinatorische Bibliothek bestehend aus 216 Verbindungen synthetisiert. Es war das Ziel, die beste strukturelle Zusammensetzung zu finden, die eine effiziente nicht-kovalente Inhibierung der Tryptase ermöglicht. Verschiedene zusätzliche Experimente in Lösung halfen bei der Aufklärung der kinetischen Beschreibung des Hemmprozesses. Zusammenfassend lässt sich die Wechselwirkung zwischen der Tryptase und den sowohl mono- als auch multivalenten Inhibitoren als nicht-destruktiv und gleichzeitig reversibel beschreiben. KW - Peptidsynthese KW - Kombinatorische Synthese KW - Enzyminhibitor KW - Aminosäuren KW - Organische Synthese KW - Guanidinderivate KW - Molekulare Erkennung KW - Onbead-Enzymscreening KW - Guanidiniocarbonylpyrrol KW - nicht-kovalente Wechselwirkungen KW - Supramolekulare Chemie KW - onbead enzym screening KW - guanidiniocarbonyl pyrrole KW - non-covalent interactions KW - supramolecular chemistry Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-38108 ER - TY - THES A1 - Urban, Christian T1 - Design, Synthese und Untersuchung eines Membrantransporters für acetylierte Aminosäuren T1 - Design, Synthesis and Investigation of a Membrane Transporter for Acetylated Amino Acids N2 - Im Rahmen dieser Arbeit wurde ein synthetischer Membrantransporter für acetylierte Aminosäurecarboxylate entworfen und hergestellt. Als Bindungsstelle für die Carboxylate wurde das Guanidiniocarbonylpyrrol-Motiv von Schmuck verwendet. In den Seitenarm des Pyrrols wurde ein L-Valinamid-Rest eingebracht, um die Möglichkeit zu zusätzlichen Wasserstoffbrückenbindungen zu bieten und gegebenenfalls Substrat- und Enantioselektivität zu erreichen. Zur Herstellung der Löslichkeit in unpolaren Medien wie dem Inneren der Zellmembran musste eine lipophile Gruppe eingebracht werden. Als löslichkeitsvermittelnder Rest wurde Tris-(Dodecyloxy)phenylmethylen ausgewählt, das drei lange unpolare Alkylreste trägt. Zusammengenommen ergab sich so ein Rezeptor für Oxo-Anionen und speziell für Aminosäurecarboxylate mit erhöhter Löslichkeit in organischen Medien. Somit war die Fähigkeit zu Membrantransport gegeben. In Kraftfeldrechnungen erhielt man die vermutliche Struktur des Rezeptor-Substrat-Komplexes, der eine Kombination aus einer Salzbrücke, Wasserstoffbrückenbindungen und einer Stapelwechselwirkung von Guanidinum-Kation, Benzylgruppe und ggf. aromatischem Rest des Aminosäuresubstrates aufweist. Nach erfolgreicher Synthese wurde in Extraktionsexperimenten die Fähigkeit des Rezeptors erprobt, Aminosäurecarboxylate aus einer wässrigen in eine organische Phase aus zu überführen. Man erhielt das beste Extraktionsvermögen für Ac-Trp-OH, gefolgt von Ac Phe OH und Ac Tyr OH. Es wurde eine neue Formel aufgestellt, mit der aus den pKS-Werten der Substrate und den Extraktionsdaten mit und ohne Rezeptor die Bindungskonstanten der Rezeptor-Substrat-Komplexe berechnet werden konnten. Die Größe der Bindungkonstanten entsprach der Reihenfolge Trp > Tyr > Phe ~ Val mit den höchsten Bindungskonstanten für das Tryptophanderivat mit 1.5*10E4 1/M. Zur Bestätigung der Bindungskonstanten wurden ITC-Messungen durchgeführt. Es wurden Messungen des Rezeptors in Chloroform mit den tert-Butylammoniumsalzen der acetylierten Aminosäuren Phenylalanin, Tyrosin und Valin durchgeführt. Für die Werte von Enthalpie und Entropie konnten bei dieser Auswertung konsistente Werte ermittelt werden. Die höchsten Werte der Enthalpie erhielt man für das Tyrosinderivat mit 3.7*10E3 cal/mol, gefolgt vom Phenylalaninderivat mit 2.8*10E3 cal/mol und Valinderivat mit 1.3*10E3 cal/mol. Diese Abstufung entspricht dem Einfluss des aromatischen Restes, der durch die Stapelwechselwirkung mit dem Guanidinium-Kation die Bindungswärme erhöht und durch den damit verbundenen engeren Komplex den Wert für die Entropie senkt. Für die Evaluierung des Transportvermögens wurden U-Rohr-Versuche verschiedener Art durchgeführt. Es wurde ein Gradient von pH 6 in der Ausgangsphase auf pH 8 in der Zielphase eingesetzt, wodurch der Rezeptor an der Grenzfläche zur Zielphase deprotoniert wurde, was zu gerichtetetem Transport führte. Es ergaben sich recht starke Unterschiede für die Fluxwerte der einzelnen Substraten, die der Reihenfolge Val > Phe > Ala > Trp > Tyr folgten. Dabei wurde das Valinderivat um den Faktor 17 schneller als das Tyrosinderivat befördert, mit dem recht hohen Flux von 1.11*10E-6 mol/m2*s, was nahe an den höchsten literaturbekannten Wert für acetylierte Aminosäuren heranreicht. Durch Verwendung gleicher Substratkonzentrationen in Start- und Zielphase konnte aktiver Transport nachgewiesen werden, d.h. Transport gegen das Konzentrationsgefälle. Die Triebkraft des Transportes war der Gradient von pH 6 auf pH 8 zwischen Ausgangs- und Zielphase, der durch den Symport von Substrat und einem Proton ausgeglichen wurde. Bei einem kompetitiven Versuch mit einer Mischung der verschiedenen Substrate in der Ausgangsphase wurden veränderte Fluxwerte und Selektivitäten festgestellt. Die neue Reihenfolge der Transportgeschwindigkeit war nun Trp > Phe > Val > Tyr > Ala, wobei die Fluxwerte fast durchgehend niedriger waren als im Einzelversuch. Die Veränderung der Werte erschließt sich bei Vergleich mit den thermodynamischen Daten aus den Extraktionsexperimenten. Bei direkter Konkurrenz um den Rezeptor wurden diejenigen Substrate mit den höchsten Bindungskonstanten bevorzugt, unabhängig von ihrer Transportgeschwindigkeit. Die schwächer bindenden Substrate wurden aus dem Komplex verdrängt und wiesen deswegen niedrigere Transportwerte auf. Der kompetitive Versuch ist somit eine stärkere Abbildung der Bindungsstärke und entspricht eher der Situation in einer realen Zelle. N2 - Within the scope of this work a new membrane carrier for acetylated amino acids was designed and synthesized. For the binding site of the carboxylate the guanidinio-carbonylpyrrole motif by Schmuck was selected. In the pyrrole’s side chain an L-valinamide residue was introduced, to allow for additional hydrogen bonding and potentially achieve substrate- and enantioselectivity. For solubility in nonpolar media such as the inner part of the cell membrane a lipophilic group had to be introduced. Tris-(dodecyloxy)-phenylmethylene, which bears three long, nonpolar alkyl chains, was selected to procure the desired solubility. All in all this yielded a receptor for oxo-anions and especially for amino acid carboxylates with increased solubility in organic media. This design resulted in the ability for membrane transport. In force field calculations the probable structure of the receptor-substrate-complex was obtained. It showed a combination of a salt bridge, hydrogen bonds and pi-stacking between the guanidinium cation, the benzyl group and, if applicable, the amino acid’s aromatic residue. After the successful synthesis, extraction experiments were carried out to test the receptor’s ability to transfer amino acid carboxylates from an aqueous into an organic phase. The best extractability was attained for Ac-Trp-OH, followed by Ac-Phe-OH and Ac-Tyr-OH. A new equation was established to calculate the binding constants of the receptor-substrate-complexes with the known pKS-values of the substrates and the extraction data with and without receptor. The values of the binding constants followed the order Trp > Tyr > Phe ~ Val with the highest values for the tryptophane derivative with 1.5*10E4 1/M. To confirm the binding constants, ITC experiments were conducted. Measurements of the receptor in chloroform with the tert-butylammonium salts of the acetylated amino acids phenylalanine, tyrosine and valine were conducted.For the enthalpy and entropy consistent values could be determined. These were 3.7*10E3 cal/mol for the tyrosine derivative, 2.8*10E3 cal/mol for the phenylalanine derivative and 1.3*10E3 cal/mol for the valine derivative. This incrementation complies with the influence of the aromatic residue, which increases the binding heat by the pi-stacking and decreases the value of the entropy because of the resulting tighter complex. For the evaluation of the transport capabilities various U-tube experiments were conducted. A gradient from pH 6 in the source phase to pH 8 in the target phase was employed, which led to deprotonation of the receptor near the interface to the target phase, resulting in directed transport. There were quite strong differences for the substrates’ flux values, which followed the order of Val > Phe > Ala > Trp > Tyr. The valine derivative was transported 17 times faster than the tyrosine derivative, with a quite high flux of 1.11*10E-6 mol/m2*s. This is close to the highest literature-known value for acetylated amino acids. By employing analogous substrate concentrations in the source and target phase, active transport, that is transport against the concentration gradient, could be achieved. The driving force of the transport was the gradient from pH 6 to pH 8 between the source and target phase, which was diminished by the symport of substrate and a proton. In a competitive experiment with a mixture of the various substrates in the source phase different values for flux and selectivity were found. The new order of the transport velocities was now Trp > Phe > Val > Tyr > Ala. Nearly all of the flux values were lower than before. The change of the values can be explained by the comparison with the thermodynamic data from the extraction experiments. With direct competition for the receptor, the substrates with higher binding constants were preferred, independent of their transport velocity. The substrates with weaker binding were expulsed from the complex and now showed lower transport values. The competitive transport experiment is therefor a better depiction of the binding strength and comes closer to the situation in a real cell. KW - Molekulare Erkennung KW - Guanidiniumverbindungen KW - Aminosäurentransport KW - Flüssig-Flüssig-Extraktion KW - Membrantransport KW - Supramolekulare Chemie KW - Organische Synthese KW - Pyrrolderivate KW - Naturstoffchemie KW - Adiabatische Kalorimetrie KW - UV-VIS-Spektroskopi KW - Aktiver Transport KW - Molecular Recognition KW - Guanidinium Cations KW - Amino Acid Transport KW - Amino Acid Extraction KW - Membrane Carrier Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-38094 ER - TY - THES A1 - Walden, Nicholas Sebastian T1 - Neue zwitterionische Halbschalen als Bausteine für supramolekulare Kapseln T1 - Novel zwitterionic subunits as building blocks for supramolecular capsules N2 - Ziel der Dissertation „Neue zwitterionische Halbschalen als Bausteine für supramolekulare Kapseln“ war die Verknüpfung zweier Guanidiniocarbonylpyrrolcarboxylat-Bindungsmotive von Schmuck über starre, sowohl aromatische als auch nichtaromatische Linker. Die so erhaltenen zwitterionische Halbschalen sollten in Lösung zu supramolekulare Kapseln aggregieren, welche einen Hohlraum ausweisen, in den Gastmoleküle eingelagert werden können. Dieses Bindungsmotiv ist selbstkomplementär und daher in der Lage Homodimere auszubilden. Durch die Kombination aus Wasserstoffbrücken und Ionenbindungen sind diese selbst in polaren Lösemitteln wie DMSO oder Wasser stabil, im Gegensatz zu Systemen, welche z.B. nur über Wasserstoffbrücken verfügen und in polaren Medien wieder dissoziieren. Zur Synthese wurden zwei Bindungsmotive mittels Tetrahydroxybenzol verbrückt. Die eindeutige Charakterisierung erfolgte über NMR-Spektroskopie, Massen-Spektrometrie und Röntgenstrukturanalyse. Anschließend wurde die Verbindung in die zwitterionische Form überführt und auf Kapselbildung hin untersucht (NMR, DOSY, Masse, Molecular Modelling). Die theoretischen Berechnungen wiesen darauf hin, dass die synthetisierten Halbschalen in der Lage sein sollten, Kapseln zu bilden. Trotz der erfolgreichen Synthese dieses neuartigen zwitterionischen Makrozyklus steht der experimentelle Nachweise auf Grund der schlechten Löslichkeit der Zwitterionen in allen verwendeten Lösemitteln noch aus. Auch wurde Glucoluril als nichtaromatisches Linkermolekül erfolgreich verwendet. Als erstes wurde das 4,4’-Diphenylglucoluril erfolgreich in der Kupplung eingesetzt. Es war möglich, die so erhaltenen cis/trans-Makrozyklen säulenchromatographisch zu isolieren und mittels Röntgenstrukturanalyse zu charakterisieren. Nach Überführung in die Zwitterionen wurden diese wiederum auf die Kapselbildung hin untersucht (NMR, DOSY, Masse, Molecular Modelling). Berechnungen zufolge sollte die Kapselbildung möglich sein, jedoch steht auch hier trotz erfolgreicher Synthese der experimentelle Nachweis auf Grund der Unlöslichkeit noch aus. Zur Verbesserung der Löslichkeit wurden zwei neue Glucolurilderivate entwickelt, welche am Phenylring mit Octyl- bzw. Triethylenglykolketten substituiert waren. Dadurch sollte die Löslichkeit der Zwitterionen in organischen bzw. wässrigen Lösungen erhöht werden. Jedoch zeigte die Einführung dieser Ketten keine wesentliche Verbesserung der Löslichkeit und somit konnte auch bei diesen neuen zwitterionischen Halbschalen keine Kapselbildung nachgewiesen werden. Im Rahmen dieser Dissertation wurden sieben neue zwitterionische makrozyklische Halbschalen synthetisiert und die daraus gewonnenen Erkenntnisse können als Ausgangspunkt verwendet werden, die Löslichkeit weiter zu verbessern. N2 - The main focus of the thesis „Novel zwitterionic subunits as building blocks for supramolecular capsules“ was to combine two Guanidiniocarbonylpyrrolecarboxylate binding motifs developed by Schmuck by the use of rigid aromatic and non aromatic linkers. The resulting zwitterionic subunits should be able to aggregate in solution to form supramolecular capsules with a cavity large enough to encapsulate guest molecules. The binding motif is self complementary and able to form homodimers. Because of the combination of hydrogen and ionic bonds, this binding motif is able to form stable dimers in polar solvents such as DMSO or water unlike a system containing only hydrogen bonds which dissociates again in polar solvents. For the synthesis, two of these binding motifs were linked together by tetrahydroxybenzene. The characterization was done by NMR-spectroscopy, mass-spectrometry and X-ray crystal structure analysis. Subsequently the compound was converted into the zwitterionic form and the capsule forming abilities were analysed (NMR, DOSY, ESI/MALDI, molecular modelling). The calculated results show that capsule formation should be possible. Despite the successful synthesis of this new zwitterionic macrocycle the experimental detection of the supramolecular capsule has not been successful yet due to the bad solubility of the zwitterions. The second system contained 4,4-diphenylglucolurile as a nonaromatic linker molecule. The cis/trans-mixture of the new macrocycles were separated by column chromatography and characterized by NMR-spectroscopy, mass-spectrometry and X-ray crystal structure analysis. The transformation into the zwitterionic form yielded two new macrocyclic zwitterionic half shells which should be able to form stable supramolecular capsules in solution. Due to the bad solubility in all used solvents the experimental detection of the supramolecular capsules has not been successful yet. The introduction of octyl and triethyleneglycole groups to enhance the solubility was successful but led to no significant change in the solubility. Despite the fact that the capsule formation could not yet be detected experimentally, seven novel macro cyclic zwitterionic half shells where synthesised and the hereby obtained knowledge can be used as a basis for the future synthesis of soluble building blocks for supramolecular capsules. KW - Supramolekulare Chemie KW - Molekulare Erkennung KW - nicht kovalente Wechselwirkungen KW - reversible Verkapselung KW - Einschlusskomplexe KW - supramolekulare Kapseln KW - Wirts-Gast-Einschlusskomplex KW - supramolecular chemistry KW - supramolecular capsules KW - organic sythesis KW - host-guest-complexation KW - non covalent interactions KW - reversible encapsulation Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-35256 ER - TY - THES A1 - Harth, Stefan T1 - Molecular Recognition in BMP Ligand-Receptor Interactions T1 - Molekulare Erkennung in BMP Ligand-Rezeptor Interaktionen N2 - Bone Morphogenetic Proteins (BMPs) are secreted multifunctional signaling proteins that play an important role during development, maintenance and regeneration of tissues and organs in almost all vertebrates and invertebrates. BMPs transmit their signals by binding to two types of serine-/threonine-kinase receptors. BMPs bind first to their high affinity receptor, thereby recruiting their low affinity receptor into the complex. This receptor assembly starts a Smad (Small mothers against decapentaplegic) protein signaling cascade which regulates the transcription of responsive genes. Up to date, only seven type I and five type II receptors are known for more than 30 ligands. Therefore, many BMP ligands can recruit more than one receptor subtype. Vice versa, receptors can bind to several ligands, indicating a highly promiscuous ligand-receptor interaction. This raises the following questions: (i) How are BMPs able to induce ligand-specific signals, despite forming complexes with identical receptor composition and (ii) how are they able to recognize and bind various binding partners in a highly specific manner. From the ligand’s point of view, heterodimeric BMPs are valuable tools for studying the interplay between different sets of receptors, thereby providing new insights into how the various BMP signals can be generated. This study describes the expression and purification of the heterodimers BMP-2/6 and -2/7 from E.coli cells. BIAcore interaction studies and various in vitro cell activity assays revealed that the generated heterodimers are biologically active. Furthermore, BMP-2/6 and -2/7 exhibit a higher biological activity in most of the cell assays compared to their homodimeric counterparts. In addition, the BMP type I receptor BMPR-IA is involved in heterodimeric BMP signaling. However, the usage of other type I receptor subtypes (e.g. ActR-I) building a heteromeric ligand-receptor type I complex as indicated in previous works could not be determined conclusively. Furthermore, BMP heterodimers seem to require only one type I receptor for signaling. From the receptors’ point of view, the BMP type I receptor BMPR-IA is a prime example for its promiscuous binding to different BMP ligands. The extracellular binding interface of BMPR-IA is mainly unfolded in its unbound form, requiring a large induced fit to adopt the conformation when bound to its ligand BMP-2. In order to unravel whether the binding promiscuity of BMPR-IA is linked to structural plasticity of its binding interface, the interaction of BMPR-IA bound to an antibody Fab fragment was investigated. The Fab fragment was selected because of its ability to recognize the BMP-2 binding epitope on BMPR-IA, thus neutralizing the BMP-2 mediated receptor activation. This study describes the crystal structure of the complex of the extracellular domain of BMPR-IA bound to the antibody Fab fragment AbyD1556. The crystal structure revealed that the contact surface of BMPR-IA overlaps extensively with the contact surface of BMPR-IA for BMP-2 interaction. Although the contact epitopes of BMPR-IA to both binding partners coincide, the three-dimensional structures of BMPR-IA in both complexes differ significantly. In contrast to the structural differences, alanine-scanning mutagenesis of BMPR-IA showed that the functional determinants for binding to both the antibody and BMP-2 are almost identical. Comparing the structures of BMPR-IA bound to BMP-2 or to the Fab AbyD1556 with the structure of unbound BMPR-IA revealed that binding of BMPR-IA to its interaction partners follows a selection fit mechanism, possibly indicating that the ligand promiscuity of BMPR-IA is inherently encoded by structural adaptability. N2 - „Bone Morphogenetic Proteins” (BMPs) sind sezernierte multifunktionelle Signalproteine, die eine wichtige Rolle während der Entwicklung, Aufrechterhaltung und Regeneration von Geweben und Organen in fast allen Vertebraten und wirbellosen Tieren spielen. Die BMP-Signalgebung wird durch die Bindung an zwei Typen von Serin/Threonin Rezeptorkinasen eingeleitet. Hierbei binden BMPs zuerst an ihren hochaffinen Rezeptor, bevor der niederaffine Rezeptor in den Komplex eingefügt wird. Durch das Zusammenfügen beider Rezeptortypen wird eine von Smad (Small mothers against decapentaplegic)-Proteinen gesteuerte Signalkaskade gestartet, die letztendlich die Transkription responsiver Gene reguliert. Aktuell sind nur sieben Typ I und fünf Typ II Rezeptoren für mehr als 30 Liganden bekannt. Viele BMP-Liganden können demzufolge mehr als einen Rezeptorsubtyp rekrutieren. Umgekehrt jedoch können auch Rezeptoren an unterschiedliche Liganden binden, was auf eine im hohen Maße promiske Ligand-Rezeptor-Interaktion hinweist. Dabei stellen sich folgende Fragen: (i) Wie können BMPs ligandspezifische Signale erzeugen, obwohl sie dafür die gleichen Rezeptoren benutzen? (ii) Und wie können BMPs unterschiedliche Bindungspartner erkennen und trotzdem hochspezifisch an diese binden? Von Blickwinkel der Liganden aus betrachtet stellen heterodimere BMPs wertvolle Hilfsmittel dar, um das Zusammenspiel zwischen den verschiedenen Rezeptortypen zu studieren. Darüber hinaus können sie neue Einblicke in die Entstehung von unterschiedlichen BMP-Signalen gewähren. In dieser Doktorarbeit wird die Expression und Aufreinigung von heterodimeren BMP-2/6 und -2/7 aus E.coli Zellen beschrieben. Mittels BIAcore Interaktionsstudien und in vitro Aktivitätsassays in Säugerzellen konnte gezeigt werden, dass die hergestellten Heterodimere biologisch aktiv sind. Darüber hinaus zeigen BMP-2/6 and -2/7 in den meisten Zellassays eine höhere biologische Aktivität als ihre homodimeren Gegenstücke. Außerdem konnte nachgewiesen werden, dass der BMP Typ I Rezeptor BMPR-IA an der Signalgebung von heterodimeren BMPs involviert ist. Eine Beteiligung weiterer Typ I Rezeptoren (wie z.B. die von ActR-I), die einen heteromeren Ligand-Rezeptor Typ I Signalkomplex bilden, wie es bereits in früheren Studien gezeigt wurde, konnte jedoch experimentell nicht eindeutig belegt werden. Des Weiteren lassen die Ergebnisse darauf schließen, dass heterodimere BMPs für eine erfolgreiche Signalweiterleitung nur die Präsenz eines einzelnen Typ I Rezeptors benötigen. Von Blickwinkel der Rezeptoren aus betrachtet, ist der BMP Typ I Rezeptor BMPR-IA ein Paradebeispiel für promiskes Bindeverhalten an verschiedene BMP-Liganden. Das extra-zelluläre Kontaktepitop von BMPR-IA ist im Wesentlichen ungefaltet, wenn BMPR-IA in freier ungebundener Form vorliegt. Infolge dessen durchläuft die Binderegion in BMPR-IA weit reichende strukturelle Veränderungen, um die erforderliche Konformation auszubilden, die für die Bindung an BMP-2 essentiell ist. Um herauszufinden, ob das promiske Binde-verhalten von BMPR-IA mit einer strukturellen Plastizität seiner Binderegion einhergeht, wurde die Interaktion zwischen BMPR-IA und einem Antikörper Fab Fragment experimentell untersucht. Das Fab Fragment wurde aufgrund folgender Eigenschaft ausgewählt, nämlich an das BMP-2 Bindeepitop des Rezeptors anzudocken, um so eine BMP-2 vermittelte Rezeptoraktivierung zu verhindern. In dieser Doktorarbeit wird die Kristallstruktur des Komplexes, bestehend aus der extrazellulären Domäne von BMPR-IA und dem Antikörper Fab Fragment AbyD1556 beschrieben. Die Kristallstruktur zeigt, dass die Kontaktoberfläche von BMPR-IA zu einem sehr großen Teil mit der Kontaktoberfläche bei der Interaktion mit BMP-2 übereinstimmt. Obwohl das Kontaktepitop von BMPR-IA zu beiden Bindungspartnern weitestgehend deckungsgleich ist, unterscheiden sich die dreidimensionalen Strukturen von BMPR-IA in beiden Komplexen sehr stark voneinander. Im Gegensatz zu den strukturellen Differenzen zeigt jedoch eine Mutationsanalyse, bei der wichtige Aminosäuren mit Alanin ausgetauscht wurden, dass die funktionellen Determinanten, die die Bindung an den Antikörper und an BMP-2 bestimmen, beinahe die gleichen sind. Wenn man die Strukturen von BMPR-IA, das an BMP-2 bzw. an das Fab Fragment AbyD1556 gebunden ist, mit der Struktur von ungebundenem BMPR-IA vergleicht, so fällt auf, dass die Bindung von BMPR-IA an seine Bindungspartner einem sog. „Selektions-Anpassungsmechanismus“ folgt, was möglicherweise zeigt, dass das promiske Ligand-Bindeverhalten von BMPR-IA von Natur aus durch seine strukturelle Anpassungsfähigkeit festgelegt wird. KW - Knochen-Morphogenese-Proteine KW - Ligand KW - Molekulare Erkennung KW - Transforming Growth Factor beta KW - Strukturaufklärung KW - Proteinfaltung KW - Proteinkristallographie KW - Heterodimer KW - BMP-2/6 KW - BMP-2/7 KW - BMPR-IA KW - Rezeptor KW - Signaltransduktion KW - protein crystallography KW - signal transduction KW - heterodimer Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52797 ER - TY - THES A1 - Bertleff-Zieschang, Nadja Luisa T1 - Galectin-1: A Synthetic and Biological Study of a Tumor Target T1 - Galectin-1: Eine Synthetische und Biologische Studie eines Tumortargets N2 - Galectin-1 (hGal-1) is overexpressed by numerous cancer types and previously conducted studies confirmed that the β-galactoside-binding protein mediates various molecular interactions associated with tumor growth, spread and survival. Upon interaction with carbohydrate-based binding epitopes of glycan structures on human cell surfaces galectin-1 induces proliferative, angiogenetic and migratory signals and modulates negative T cell regulation which essentially helps the tumor to evade the immune response. These findings attributed galectin-1 a pivotal role in tumor physiology and strongly suggest the protein as target for diagnostic and therapeutic applications. Within the scope of this work a strategy was elaborated for designing tailor-made galectin-1 ligands by functionalizing selected hydroxyl groups of the natural binding partner N-acetyllactosamine (LacNAc) that are not involved in the sophisticated interplay between the disaccharide and the protein. Synthetic modifications intended to introduce chemical groups i) to address a potential binding site adjacent to the carbohydrate recognition domain (CRD) with extended hGal-1-ligand interactions, ii) to implement a tracer isotope for diagnostic detection and iii) to install a linker unit for immobilization on microarrays. Resulting structures were investigated regarding their targeting ability towards galectin-1 by cocrystallization experiments, SPR and ITC studies. Potent binders were further probed for their diagnostic potential to trace elevated galectin-1 levels in microarray experiments and for an application in positron emission tomography (PET). N2 - Galectin-1 (hGal-1) wird von zahlreichen Tumoren überexprimiert und frühere Studien bestätigten, dass das β-Galactosid-bindende Protein verschiedene molekulare Wechselwirkungen vermittelt, welche in direktem Zusammenhang mit Tumorwachstum, -ausbreitung und -überleben stehen. Durch die Wechselwirkung mit Kohlenhydrat-basierten Bindungsepitopen von Glykanstrukturen auf Zelloberflächen induziert Galectin-1 proliferative, angiogenetische und migratorische Signale und moduliert die negative Regulierung von T-Zellen, entscheidend für den Tumor, um der Immunantwort zu entkommen. Diese Beobachtungen schreiben Galectin-1 eine zentrale Rolle in der Tumorphysiologie zu, was dieses Protein zu einem attraktiven Target für diagnostische und therapeutische Anwendungen macht. Im Rahmen dieser Arbeit wurde eine Synthesestrategie für das Design maßgeschneiderter Galectin-1 Liganden entwickelt, wobei ausgewählte Hydroxylgruppen des natürlichen Bindungspartners N-Acetyllactosamin (LacNAc), welche nicht an dem hochkomplexen Zusammenspiel zwischen Protein und Disaccharid beteiligt sind, funktionalisiert wurden. Synthetische Modifikationen wurden mit der Absicht eingeführt i) eine potentielle Bindungstasche in Nachbarschaft der Kohlenhydraterkennungsdomäne (CRD) zu adressieren, ii) einen Isotopenmarker für die diagnostische Detektion zu implementieren und iii) eine Brückeneinheit zu integrieren, welche einer späteren Immobilisierung auf Mikroarrays dient. Resultierende Strukturen wurden mittels Kokristallisationsexperimenten, SPR- und ITC-Studien auf ihre Fähigkeit untersucht, Galectin-1 zu adressieren. Erfolgreich entwickelte Liganden wurden zudem auf ihr diagnostisches Potential getestet, erhöhte Galectin-1-Spiegel in Microarray-Experimenten zu detektieren und könnten zukünftig Einsatz in der Positronen-Emissions-Tomographie (PET) finden. KW - Organische Synthese KW - Galectine KW - Kohlenhydrate KW - Molekulare Erkennung KW - Click-Chemie KW - carbohydrate chemistry KW - protein crystallography KW - galectin-1 KW - protein-ligand-interaction KW - N-acetyllactosamine Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101529 ER - TY - THES A1 - Weißenstein, Annike T1 - Optische Chemosensoren aus Naphthalin- und Perylenbisimid-Farbstoffen T1 - Optical Chemosensors from Naphthalene and Perylene Bisimide Dyes N2 - Die Liste der interessanten nachzuweisenden Analyte ist lang. Deswegen besteht ein großer Bedarf zur Entwicklung neuer fluoreszierender und kolorimetrischer Chemosensoren. Ziel der vorliegenden Arbeit war daher die Synthese und Charakterisierung neuer optischer bzw. fluoreszierender und kolorimetrischer Chemosensoren mit dem Fokus auf die beiden Substanzklassen der Naphthalinbisimide und Perylenbisimide. Der erste Arbeitsschwerpunkt befasste sich mit wasserlöslichen Naphthalinbisimiden und ist in drei Unterkapitel aufgeteilt (Kapitel III – 1.1.-1.3., Abbildung 79). Im ersten Unterkapitel (Kapitel III – 1.1.) wurden die Synthesen und optischen Eigenschaften der am Kern Amino-substituierten NBIs 60a-h, mit Dicarbonsäureresten in Imid-Position und 61a-h, mit 2-Dimethylaminoethyl-Gruppen, in polaren Lösungsmitteln beschrieben. Die systematische Anbringung verschiedener Amino-Substituenten mit steigendem elektronenziehendem Charakter der Aminoreste diente der mechanistischen Aufklärung der optischen Eigenschaften. Eine vollständige Untersuchung der optischen Eigenschaften erfolgte in wässriger Pufferlösung bei pH 2.1 sowie in Methanol und Acetonitril. Der Einfluss der Imid-Substituenten auf die optischen Eigenschaften war wie zu erwarten gering. Die verschiedenen Kern-Substituenten verursachten hingegen eine hypsochrome Verschiebung der Absorptions- und Fluoreszenzmaxima mit steigendem elektronenziehendem Charakter der an der Aminogruppe angebrachten Reste. Ein unerwarteter Trend konnte im Fall der Fluoreszenzquantenausbeute beobachtet werden. In den protischen Lösungsmitteln Wasser und Methanol wurde eine lineare Abhängigkeit gegenüber der Hammett-σmeta-Konstante ermittelt. Mit steigendem elektronenziehendem Charakter der Kern-Amino-Substituenten erfuhr die Quantenausbeute einen Anstieg auf bis zu 39% in Wasser für NBI 60h, 61h und 45% in Methanol für 60h. Die Tatsache, dass in Acetonitril keine solche Abhängigkeit gegenüber der Hammett-Konstante beobachtet werden konnte legte eine intermolekulare Wasserstoffbrücken-Bindung im angeregten Zustand als konkurrierenden Prozess zur Fluoreszenz nahe. Dieser Prozess tritt zwischen den Lösungsmittel-Molekülen und der Akzeptorgruppe (Carbonyl-Sauerstoff) der NBIs, welcher einen strahlungslosen Relaxationsprozess bzw. Fluoreszenzlöschung zur Folge hat, auf. Der Einfluss dieses Prozesses lässt sich durch die Stärke des elektronenziehenden Amino-Substituentens steuern. Die NBIs 60a-h zeigten zudem in potentiometrischen Titrationen in Wasser eine pH-Unabhängigkeit der optischen Eigenschaften bezüglich des Imid-Substituentens. Dies macht die NBIs mit Dicarbonsäureresten für die Anwendung in biologischen Systemen im neutralen pH-Milieu oder als chemische Sensoren besonders geeignet. Aufgrund dieser interessanten Befunde wurde im zweiten Unterkapitel (Kapitel III – 1.2.) das dihalogenierte NBI 58 hinsichtlich der Sensoreigenschaften gegenüber primären, sekundären und tertiären Amin- bzw. Diamindampf sowie zur Frischekontrolle von Fleisch untersucht. Die Absorptions- und Fluoreszenz-spektroskopische Untersuchung des Dünnschichtfilms von NBI 58 zeigte die erfolgreiche, selektive Detektion von primären Aminen und Diaminen bzw. biogenen Aminen. Zum einen konnte mit bloßen Auge ein Farbumschlag von gelb nach rot und zum anderen Änderungen in den Absorptionsspektren wie die Entstehung einer neuen bathochrom verschobenen Bande im Dünnschichtfilm beobachtet werden. Die Erhöhung der Fluoreszenz wie auch die NMR-spektroskopische Untersuchung konnte hingegen ausschließlich in Lösung detektiert werden. Hiermit konnte die kovalente Wechselwirkung der Amin-Moleküle mit dem NBI 58 nachgewiesen werden. Trotz der erfolgreichen Detektion biogener Amindämpfe erwies sich NBI 58 aufgrund der zu geringen Reaktivität als ungeeigneter chemischer Sensor zur Frischekontrolle von Fleisch. Das dritte und letzte Unterkapitel (Kapitel III – 1.3.) dieses Abschnittes bestand in der Synthese monochlor-monoamino-substituierter NBIs am Kern (65a,b und 66) und der Wechselwirkungen dieser Farbstoffe mit DNS/RNS. Die NBIs 65a,b und 66 wiesen in der Imidstellung 3-Trimethylammoniumpropyl auf, um die Wasserlöslichkeit zu gewährleisten und die elektrostatische Wechselwirkung mit dem negativ geladenen Phosphatrückgrad der DNS/RNS zu bewirken. Am Kern wurden die Aminosäuren (S)-2,3-Diaminopropionsäure (L-Dap) (65a) und (S)-2,6-Diaminohexansäure (L-Lys) (65b) sowie 2-Trimethylammoniumethylamin (66) eingefügt. Die Untersuchungen mit Hilfe von thermischen Denaturierungsstudien zeigten mit allen NBIs eine deutliche Schmelzpunkterhöhung der DNS/RNS (ΔTm-Werte zwischen 17 und 35 °C), was die Bildung von NBI/Polynukleotid-Komplexen nahelegte. Diese Komplex-Bildung konnte erneut aufgrund enormer Fluoreszenzlöschung in fluorimetrischen Titrationsstudien bestätigt werden. Hier wurden Bindungskonstanten zwischen logK = 5.9 und 7.2 M-1 ermittelt, wobei NBI 65a und poly(dG-dC)2 der stärksten Bindungsaffinität und NBI 65a und poly(dA-dT)2 der schwächste zugeordnet werden konnte. Für NBI 66 wurde die zweithöchste Bindungsaffinität zu Polynukleotid ct-DNS (logK = 7.08 M-1) beobachtet, während dieser Farbstoff sowie 65a,b nur geringe Bindungskonstanten mit dem Polynukleotid polyA-polyU zeigten. Mit Hilfe der CD-spektroskopischen Messungen wurde der Bindungsmodus und die Unterschiede in den Bindungseigenschaften der Farbstoffe mit DNS/RNS ermittelt. Der Großteil aller NBI-Verbindungen interkalierte in einer parallelen Anordnung zwischen die Basenpaare der Polynukleotide. Für NBI 65a und poly(dG-dC)2 ließ sich jedoch eine perpendikulare Anordnung zu den Basenpaaren beobachten. ITC-Titrationsstudien komplettierten letztendlich die Untersuchungen zwischen NBIs und Polynukleotiden. Neben Interkalation als Bindungsmodus konnte zusätzlich aufgrund der relativ hohen Entropiewerte eine Wechselwirkung zwischen den Substituenten am Kern und den Phosphatgruppen in der kleinen Furche festgestellt werden. Zusammengefasst sind die sterischen Hinderungen der Amino-Substituenten und die Furcheneigenschaften von ds-DNS/RNS entscheidend. Der zweite Arbeitsschwerpunkt ist ebenfalls in drei Unterkapitel (Kapitel III – 2.1.-2.3.) aufgeteilt und befasste sich mit der Synthese und den Sensoreigenschaften kernfunktionalisierter Perylenbisimide (Abbildung 80). Im ersten Abschnitt (Kapitel III – 2.1) wurde die Synthese und die optischen Eigenschaften in Lösung der am Kern einfach und zweifach Kronenether-funktionalisierten PBIs 77a,b und 71a,b untersucht. In Imidstellung waren alle PBIs mit 2-Trimethylammoniumethyl-Resten funktionalisiert, um eine Löslichkeit in polaren Lösungsmitteln zu gewährleisten. Die Buchtpositionen wurden jeweils ein- bzw. zweifach mit den Kronenether-Einheiten 2-Hydroxymethyl-15-Krone-5 und 2-Hydroxymethyl-18-Krone-6 substituiert. Die anschließende Untersuchung der optischen Eigenschaften der PBIs zeigten bei einer Konzentration von 10-5 M in Acetonitril den monomeren Zustand und in Wasser die Ausbildung von H-Aggregaten. Die Fluoreszenzquantenausbeuten erfuhren in Acetonitril mit steigender Kronenether-Ringgröße eine Zunahme von 73% auf 81% für die PBIs 71a,b und eine vernachlässigbare geringe Zunahme von 49% auf 51% für die PBIs 77a,b. Die Abnahme der Quantenausbeute vom zweifach funktionalisierten zum einfach funktionalisierten PBI um ca. 30% ließ sich durch die stärker ausgeprägten strahlungslosen Relaxationsprozesse dieses flexibleren Moleküls im angeregten Zustand erklären. Im zweiten Unterkapitel (Kapitel III – 2.2.) wurden die Selbstassemblierungseigenschaften der synthetisierten PBIs 71a,b und 77a,b in Gegenwart verschiedener Metallionen (Na+, K+, Rb+, Mg2+, Ca2+ und Ba2+) untersucht. Hier konnte eine Abhängigkeit von der Größe des Kronenether-Rezeptors sowie von der Art der Metallionen gezeigt werden. Die Absorptions- und Fluoreszenz-spektroskopischen Studien der zweifach funktionalisierten PBIs 71a und 71b bei einer PBI-Konzentration von c = 10-5 M zeigten ausschließlich für das 15-Krone-5-Derivat 71a und Ba2+ eine erfolgreiche Ausbildung von PBI-Stapeln mit H-artiger exzitonischer Kopplung. Aufgrund dessen erfuhr das Absorptionsmaximum eine stetige Abnahme einhergehend mit einer hypsochromen Verschiebung und die Fluoreszenz eine vollständige Löschung. Zudem konnte eine 1:1-Stöchiometrie der PBI-Stapeln ermittelt werden. Die Anpassung der spektroskopischen Änderungen an die Hill-Gleichung bestätigte letztendlich die Bildung eines [2+2]-Sandwich- bzw. Dimer-Komplexes in einem positiv kooperativen Bindungsprozess, in dem mittels ITC eine enorme Stabilisierung der Ba2+-Komplexierung aufgrund der π-π-Wechselwirkung zwischen zwei PBI-Molekülen, beobachtet wurde. Die Durchführung der Titrationsexperimente bei einer höheren PBI-Konzentration (c = 10-4 M) zusammen mit DOSY-Experimenten versicherten auch in diesem Fall die Formation diskreter Dimerkomplexe. Das einfach funktionalisierte PBI 77a zeigte in der Anwesenheit von Ba2+ ähnliche optische Änderungen. Die nachfolgenden Untersuchungen bzw. Interpretationen bestätigten die Bildung eines [1+2]-Dimerkomplexes mit H-artiger exzitonischer Kopplung, welches aufgrund der flexibleren Komplexstruktur keine Stabilisierung der Ba2+-Komplexierung erfuhr. Neben der Metallionen-Komplexierung war PBI 71b auch in der Lage, in einer 1:2-Stöchiometrie aromatische Aminosäuren und Dipeptide zu erkennen (Kapitel III – 2.3.), da hier sowohl die Ammoniumgruppen der Aminosäuren und Dipeptide mit den Kronenethereinheiten als auch die aromatischen Einheiten mit dem PBI-Kern wechselwirken können. Fluoreszenz-Titrationsexperimente zeigten, dass die Aminosäuren L-Tryptophan und L-Tyrosin, welche elektronenreiche aromatische Gruppen aufweisen, und Dipeptide, die diese Aminosäuren enthalten, die Fluoreszenz des PBIs stark löschen. Die Bindungskonstanten der Wirt-Gast-Komplexierung in Acetonitril konnten aufgrund eines statischen Löschungsprozesses aus den Fluoreszenztitrationsdaten bestimmt werden. Hier wurde beobachtet, dass die Bindungsstärke von der Größe und der elektronischen Natur der aromatischen Einheiten sowie von dem Abstand zwischen der Ammoniumgruppe und der aromatischen Einheit in Aminosäuren und Dipeptiden abhängt. Die stärkste Bindung konnte zwischen Ala-Trp und PBI 71b mit einem Wert von 3.1 x 105 M-1 beobachtet werden. NMR-Studien bestätigten ebenfalls die Wirt-Gast-Komplexierung, ließen jedoch offen, ob es zu der Bildung von zwei Diastereomeren aufgrund der eingeschränkten Umwandlung der Atrop-Enantiomere (P und M) des PBI 71b kommt oder zu der Bildung von vier Diastereomeren infolge des Chiralitätszentrums im Kronenether. Zusammenfassend wurden in dieser Arbeit Naphthalinbisimde und Perylenbisimide hinsichtlich ihrer Eignung als optische Chemosensoren untersucht. Die NBI-Derivate agierten aufgrund ihrer interessanten optischen Eigenschaften als chemische Sensoren selektiv für primären Amindampf und für die DNS/RNS-Wechselwirkung. Im Fall der PBI-Verbindungen wurden hervorragende fluorometrische Chemosensoren ermittelt, die Ba2+-Ionen und elektronenreiche aromatische Aminosäuren und Dipeptide in einer deutlichen Fluoreszenzlöschung detektieren können. N2 - The list of interesting analytes to be detected is long, therefore there is a great need for the development of new simpler fluorescent and colorimetric chemosensors because of their high sensitivity and selectivity for visual discrimination. Thus, the aim of the present work was the synthesis and characterization of new optical respectively fluorescent and colorimetric chemosensors with the focus on the substance classes naphthalene bisimide and perylene bisimide. The first focus of this work dealt with water-soluble naphthalene bisimides and is divided into three subchapters (Chapter III – 1.1.-1.3., Figure 1). In the first subchapter (Chapter III – 1.1.), the syntheses and optical properties of the amino-substituted NBIs 60a-h with dicarboxylic acid residues in the imide position and 61a-h with 2-dimethylaminoethyl groups, were described in polar solvents. The systematic attachment of various amine substituents with increasing electron-withdrawing character of the amino residues served the mechanistic elucidation of the optical properties. A complete examination of the optical properties was carried out in aqueous buffer solution at pH 2.1 as well as in methanol and acetonitrile. As expected, the influence of the imide substituents on the optical properties was not significant. However, the different core substituents caused a hypsochromic shift of the absorption and fluorescence maxima with increasing electron-withdrawing character of the amino residues. An unexpected trend could be observed with regard to fluorescence quantum yield. In protic solvents, like water and methanol, a linear dependence of the Hammett constants was determined. Thus, with increasing electron-withdrawing character of the core-amino substituents the quantum yield increased to 39% in water for NBI 60h, 61h and to 45% in Methanol for 60h. The fact that no linear dependence was observed with respect to Hammett σmeta constants in acetonitrile, suggested an excited-state intermolecular hydrogen bond as a competitive process to fluorescence. This process occurs between the solvent molecules and the acceptor group (carbonyl oxygen) of the NBIs, which results in a radiationless relaxation process or fluorescence quenching. The influence of this process can be controlled by the strength of the electron-withdrawing amino substituent. In addition, the NBIs 60a-h showed a pH-independence of the optical properties with respect to the imide substituent in potentiometric titrations in water. This characteristic makes NBIs with dicarboxylic acid residues in particular suitable for the use in biological systems in a neutral pH environment or as chemical sensors. Because of these interesting results, the second subchapter (Chapter III - 1.2.) examined the dihalogenated NBI 58 with regard to sensing properties of primary, secondary and tertiary amine or diamine vapor as well as for freshness control of meat. The absorption and fluorescence spectroscopic studies of a thin film of NBI 58 successfully demonstrated the selective detection of primary amines and diamines respectively biogenic amines which is accompanied by absorption changes, such as the formation of a new bathochromic shifted band and the pronounced color change of the thin film can be observed by naked eye. The increase in fluorescence as well as the NMR spectroscopic investigation, however, could be determined only in solution. Hereby, the covalent interaction of the amine molecules with the NBI 58 could be proven. Despite the successful detection of biogenic amine vapors, NBI 58 proved to be an inappropriate chemical sensor for meat freshness control because of its low reactivity. The last subchapter (Chapter III – 1.3.) of this section consisted of the synthesis of monoamino-core-substituted NBIs and the investigation of the interactions of these dyes with DNA/RNA. NBIs 65a,b and 66 were equipped with 3-trimethylammonium propyl residues in the imide position to ensure water solubility and to cause electrostatic interaction with the negatively charged phosphate backbone of the DNA/RNA. Furthermore, the amino acids (S)-2,3-diaminopropionic acid (L-Dap) (65a) and (S)-2,6-diaminohexanoic acid (L-Lys) (65b) and 2-trimethylammonium ethylamine (66) were introduced to the core of the NBIs. Thermal denaturation studies showed for all NBIs a clear increase of the melting temperature of the DNA/RNA (ΔTm values between 17 and 35 °C) which can be attributed to the formation of NBI/polynucleotide complexes. This complex formation could also be confirmed by fluorometric titration studies due to an enormous fluorescence quenching. Hence, binding constants between logK = 5.9 and 7.2 M-1 were determined, whereby NBI 65a and poly(dG-dC)2 showed the strongest binding affinity and NBI 65a and poly(dA-dT)2 the weakest. A high affinity towards polynucleotide ct-DNA (logK = 7.08 M-1) was observed for NBI 66, whereas this dye and as well as 65a,b showed only low binding constants with the polynucleotide polyA-polyU. CD spectroscopic measurements were performed to determine the binding mode and the differences in the binding properties of the dyes with DNA/RNA. The majority of all NBI compounds intercalated in a parallel fashion between the base pairs of the polynucleotides, but for NBI 65a and poly(dG-dC)2 a perpendicular alignment with regard to the base pairs was observed.Finally, ITC titration studies completed investigations on interactions between NBIs and polynucleotides. In addition to an intercalation mechanism, the interaction of the amino core-substituents with the phosphate groups in the minor groove could be determined, due to relatively high entropy values. In summary, the steric hindrance of the amine substituents at the core and the groove properties of ds-DNA/RNA are crucial. The second focus of this work is also divided into three subsections (Chapter III – 2.1.-2.3.) and dealt with the synthesis and sensor properties of core-functionalized perylene bisimides (Figure 2). In the first section (Chapter III – 2.1.), the syntheses and optical properties of core-single and double crown ether functionalized PBIs 77a,b and 71a,b were investigated in solution. All PBIs were functionalized with 2-trimethylammoniumethyl residues at the imide position to ensure solubility in polar solvents. Bay positions were substituted once or twice with the crown ether units, 2-hydroxymethyl-15-crown-5 and 2-hydroxymethyl-18-crown-6. Subsequent investigation of the optical properties of the PBIs at a concentration of 10-5 M showed the monomeric state in acetonitrile and the formation of H-aggregates in water. Fluorescence quantum yields in acetonitrile increased with increasing ring size of the crown ethers from 73% to 81% for the PBIs 71a,b and a negligible small increase from 49% to 51% for the PBIs 77a,b. Decrease in quantum yield from the double functionalized to the single functionalized PBI by about 30% could be explained by the pronounced nonradiative relaxation processes of this flexible molecule in the excited state. In the second subchapter (Chapter III – 2.2.), the self-assembly properties of PBIs 71a,b and 77a,b were investigated in the presence of various metal ions (Na+, K+, Rb+, Mg2+, Ca2+, and Ba2+). Here, a dependence on the size of the crown ether receptor as well as on the type of metal ions could be shown. The absorption and fluorescence spectroscopic studies of the double functionalized PBIs 71a and 71b at a PBI concentration of c = 10-5 M showed successful formation of PBI stacks with H-type exciton coupling exclusively for the 15-crown-5 derivative 71a upon titration with Ba2+. Due to this, the absorption maximum experienced a decrease along with a hypsochromic shift and the fluorescence was completely quenched. In addition, a 1:1 stoichiometry of the PBI stacks could be determined. The fitting of the spectroscopic changes to the Hill equation finally confirmed the formation of a [2+2] sandwich complex in a positive cooperative binding process, in which an enormous stabilization of the Ba2+ complexation due to π-π interaction between two PBI molecules was observed by ITC experiments. Titration experiments at a higher PBI concentration (c = 10-4 M) revealed also in this case the formation of discrete dimer complexes which was further corroborated by DOSY experiments. The single functionalized PBI 77a showed similar optical changes in the presence of Ba2+. The subsequent studies or interpretations confirmed the formation of a [1+2] dimer complex with H-type exciton coupling, which did not undergo stabilization of Ba2+ complexation due to the more flexible complex structure. In addition to metal ion complexation, PBI 71b is also able to recognize aromatic amino acids and dipeptides in a 1:2 stoichiometry (Chapter III – 2.3.). The ammonium groups of the amino acids and dipeptides were complexed by the crown ether units and consequently, the aromatic moieties interact with the PBI core. Fluorescence titration experiments have shown that amino acids L-tryptophan and L-tyrosine bearing electron-rich aromatic groups and dipeptides containing these amino acids strongly quench the fluorescence of the PBI receptor. The binding constants of host-guest complexation could be determined from the fluorescence titration data due to a static quenching process. Hence, it has been observed that the binding strength is dependent on the size and electronic nature of the aromatic units as well as on the distance between the ammonium group and the aromatic unit in amino acids and dipeptides. The strongest binding affinity was observed for Ala-Trp and PBI 71b with a value of 3.1 x 105 M-1. NMR studies also confirmed host-guest complexation, but revealed the formation of two diastereomers due to restricted conversion of the atropo-enantiomers (P and M) of PBI 71b or the formation of four diastereomers due to the chirality center in the crown ether. In summary, in this work naphthalene bisimide and perylene bisimide were investigated for their suitability as optical chemosensors. Because of their interesting optical properties, the NBI derivatives acted as chemical sensors selectively for primary amine vapor and for interaction with DNA/RNA. In the case of PBI compounds, excellent fluorometric chemosensors have been determined that can detect Ba2+ ions and electron-rich aromatic amino acids and dipeptides resulting in a significant fluorescence quenching. KW - Chemischer Sensor KW - Supramolekulare Chemie KW - Chemical Sensor KW - Molecular Recognition KW - DNA KW - Supramolecular Chemistry KW - Naphthalinderivate KW - Perylenderivate KW - DNS KW - Molekulare Erkennung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161990 ER -