TY - THES A1 - Weiß, Jörg T1 - Beiträge zur Chemie des höherkoordinierten Siliciums: Synthese, Struktur und Eigenschaften neuer penta- und hexakoordinierter Silicium(IV)-Komplexe T1 - Contributions to the Chemistry of Higher Coordinate Silicon: Syntheses, Structures and Properties of Novel Penta- and Hexacoordinate Silicon(IV) Complexes N2 - Die vorliegende Dissertation stellt einen Beitrag zur Chemie des höherkoordinierten Siliciums dar. Im Rahmen dieser Untersuchungen wurden neue neutrale penta- und hexakoordinierte Silicium(IV)-Komplexe, sowie deren benötigte Vorstufen dargestellt. Weiterhin wurde ein kationischer und ein zwitterionischer Silicium(IV)-Kompex synthetisiert. Die Charakterisierung dieser Verbindungen erfolgte durch Elementaranalysen, Festkörper-NMR-Spektroskopie (13C-, 15N-, 29Si- und 77Se-VACP/MAS-NMR) und Kristallstrukturanalysen. Ergänzend wurden einige Verbindungen durch NMR-Spektroskopie in Lösung (1H, 13C, 19F, 29Si, und 77Se) charakterisiert. N2 - This dissertation deals with the chemistry of higher-coordinate silicon. In the course of these studies, novel neutral penta- and hexacoordinate silicon(IV) complexes and the needed precursors were prepared. Furthermore, one kationic and one zwitterionic silicon(IV) complex was synthesized. These compounds were characterized by elemental analyses, solid-state NMR spectroscopy (13C, 15N, 29Si, and 77Se VACP/MAS NMR), and single-crystal X-ray diffraction. In addition, some of these compounds were characterized by NMR spectroscopy in solution (1H, 13C, 19F, 29Si, and 77Se). KW - Hypervalentes Molekül KW - Silicat Coordination Chemistry KW - Siliciumkomplexe KW - Chemische Synthese KW - Silicate KW - higher-coordinate KW - Pentacoordination KW - Hexacoordination KW - Höherkoordination KW - Koordinationschemie KW - Selen KW - Silicium KW - Siliciumkomplexe KW - Zwitterion KW - Koordinationslehre Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93250 ER - TY - THES A1 - Wahler, Johannes T1 - Borole als Synthesebausteine für neue Organoborverbindungen T1 - Boroles as Synthetic Building Blocks for novel Organoboron Compounds N2 - Die vorliegende Arbeit befasst sich mit der Synthese neuer Borolderivate des Typs Ph4C4BR' (R' = Substituent am Borzentrum). Zudem wurde die Reaktivität ausgewählter Borole gegenüber Lewis-Basen, gesättigten und ungesättigten Substraten sowie unter Reduktionsbedingungen untersucht. Auf diese Weise konnten neue Strategien für die Synthese von Bor-haltigen konjugierten Systemen erschlossen werden. Alle wichtigen Strukturmotive wurden durch Multikern-NMR-Spektroskopie in Lösung sowie durch Einkristall-Röntgenstrukturanalyse im Festkörper charakterisiert. N2 - The present work addresses the synthesis of novel borole derivatives derived from the Ph4C4BR' framework (R' = substituent at boron). Furthermore, the reactivity of selected boroles towards Lewis bases, saturated and unsaturated substrates as well as under reduction conditions was analyzed. Within this context new strategies for the synthesis of conjugated organoboron compounds were developed. All major structural motifs were characterized by multinuclear NMR spectroscopy in solution as well as single crystal X-ray diffraction in the solid state. KW - Chemische Synthese KW - Borole KW - Reaktivität KW - Radikal-Anion KW - Carboran KW - synthesis KW - boron KW - reactivity KW - borole KW - radical anion KW - carborane KW - Borolderivate KW - Bor KW - Synthese Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-84095 ER - TY - THES A1 - Vögler, Matthias T1 - Zweifach Eisen-substituierte Silane, Silanole und Siloxane T1 - Double iron substituted Silanes, Silanols and Siloxanes N2 - Die vorliegende Dissertation beschäftigt sich mit der Darstellung Übergangsmetall-substitutierter Silane und Untersuchungen zum Einfluss verschiedener Übergangsmetallsubstituenten auf die chemischen und spektroskopischen Eigenschaften dieser Klasse von Siliciumverbindungen. Dabei steht insbesondere die Synthese mehrfach metallierter Silanole und Siloxane im Vordergrund. A – Halogenierte Bis(metallo)silane: Durch schrittweise Umsetzung von HSiCl3 oder HSiCl2Me mit den Übergangsmetallaten Na[Fe(CO)2Cp] oder Li[W(CO)2PMe3Cp] wurden verschiedene bismetalliete Silane [LnM]2SiRCl (R = H, Me) aufgebaut. Durch weitere Derivatisierung konnten u.a. die Bis(ferrio)silane [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I) dargestellt und z. T. durch Röntgenstrukturen charakterisiert werden. Aus diesen Verbindungen lassen sich durch photochemische CO-Eliminierung die µ2-silylenverbrückten Komplexe [Cp(OC)Fe]2(µ2-CO)(µ2-SiRHal) (R = Me, Halogen) gewinnen. B – Bis(metallo)silanole und –siloxane: Die unter A hergestellten Verbindungen dienten als Vorstufen zur Synthese der neuen Bis(ferrio)silanole [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) und des hetero-bismetallierten Silanols [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Dabei konnte lediglich [Cp(OC)2Fe]2SiH(OH) durch Hydrolyse des entsprechenden halogenierten Bis(ferrio)silans hergestellt werden. Alle anderen Bis(metallo)silanole wurden durch Oxygenierung der jeweiligen SiH-funktionellen Vorstufen mit Hilfe von Dimethyldioxiran synthetisiert. Alle Bis(metallo)silanole sind stabil bezüglich Eigenkondensation, lassen sich aber mit ClSiMe2H in die entsprechenden Siloxane [LnM]2SiR(OSiMe2H) umwandeln. C – Co2(CO)2 assistierte Hydrolyse von Silanen: Die Umsetzung verschiedener Si-H-funktioneller Silane R3Si-H mit Dicobaltoctacarbonyl führt unter H2-Entwicklung zu Cobaltio-Silanen R3Si-Co(CO)4. Diese besitzen eine extrem labile Si-CoBindung, welche sich durch zahlreiche protische Reagenzien spalten läßt. Es wurden u. a die Cobaltio-Silane Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 und Ph2SiCo2(CO)7 generiert und durch Hydrolyse in verschiedene Silanole oder Siloxane überführt. Eine direkte hydrolytische SiH/SiOH-Umwandlung ist auch in Gegenwart katalytischer Mengen Co2(CO)8 möglich und wurde u.a. zur Darstellung des Bis(ferrio)siloxanols [Cp(OC)2Fe]2Si(OH)(OSiMe2H) genutzt. D – DFT-Berechnungen an Übergangsmetallverbindungen von Silicium und Phosphor: Die Strukturen der dimeren Siloxygallane (RH2SiOGaMe2)2 (R = H, tBu) wurden theoretisch berechnet. Man findet eine starke Abhängigkeit der Geometrie des zentralen viergliedrigen Ga-O-Ga-O-Ringes von Größe und relativen Position der exocyclischen Substituenten R. Struktur- und NBO-Analyse des cyclischen Metallasiloxans Cp(OC)(H)Fe[SiMe2O]2SiMe2 belegen den Einfluß des Cp(OC)(H)Fe-Fragmentes auf Struktur und Bindungsverhältnisse des Heterosiloxan Ringes. Relative thermodynamische Stabilitäten wurden für die diastereomeren Formen des kationischen Phosphankomplexe lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ und des µ2-silylenbrückten Eisenkomplexes cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) theoretisch berechnet. N2 - The present Ph.D. thesis is dealing with the preparation of transition metal substituted silanes and with studies concerning the influence of various transition metal substituents on the chemical and spectroscopic properties on this class of silicon compounds. Special emphasis is laid upon the synthesis of silanols and siloxanes with multiple metal substituents A – Halogenated bis(metallo)silanes: Several bismetalated silanes [LnM]2SiRCl (R = H, Me) have been prepared by stepwise metalation of HSiCl3 or HSiCl2Me with the metalates Na[Fe(CO)2Cp] and Li[W(CO)2PMe3Cp]. Of these metallosilanes further derivatives have been prepared, e. g. the halogenated bis(ferrio)silanes [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I), some of which could by characterized by X-ray structures. Photochemical CO elimination from these compounds yields µ2-silylene bridged complexes of the type [Cp(OC)Fe](µ2-CO)(µ2SiRHal) (R = Me, halogen). B – Bis(metallo)silanols and –siloxanes: The compounds prepared in chapter A have served as precursors in the synthesis of the novel bis(ferrio)silanols [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) and the hetero-bismetalated silanol [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Only [Cp(OC)2Fe]2SiH(OH) could be prepared via hydrolysis of the respective halogenated bis(ferrio)silane. The other bis(metallo)silanols were prepared by oxygenation of the SiH functional precursors using dimethyldioxirane. All bis(metallo)silanols are stable with respect to self condensation but can be readily converted with ClSiMe2H into the siloxanes [LnM]2SiR(OSiMe2H). C – Co2(CO)8 assisted hydrolysis of silanes: Reaction of various SiH functional silanes R3SiH with dicobaltoctacarbonyl leads to the formation of H2 and the cobaltio-silanes R3Si-Co(CO)4. The Si-Co bond in these metallosilanes is extremely weak and can be easily cleaved by protic solvents. Several cobaltio-silanes including Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 and Ph2SiCo2(CO)7 have been generated and then converted by hydrolysis into silanols or siloxanes. A direct hydrolytic SiH/SiOH transformation can also be achieved in the presence of catalytic amounts of Co2(CO)8. This procedure has been used e.g. for the preparation of the bis(ferrio)siloxanol [Cp(OC)2Fe]2Si(OH)(OSiMe2H). D – DFT calculations of transition metal substituted compounds of silicon and phosphorous: The molecular structure of the dimeric siloxygallanes (RH2SiOGaMe2)2 (R = H, tBu) has been calculated. A significant dependence of the geometry of the central four membered Ga-O-Ga-O ring on size and relative position of the exocyclic substituents R was found. The calculated structure and NBO analysis of the cyclic metallasiloxane Cp(OC)(H)Fe[SiMe2O]2SiMe2 are demonstrating the impact of the Cp(OC)(H)Fe-fragment on structure and bonding within the hetero-siloxane ring. The relative thermodynamic stabilities of the diastereomeric forms of the cationic phosphane complex lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ and the µ2-silylene bridged iron complex cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) have been calculated. KW - Eisenkomplexe KW - Siliciumorganische Verbindungen KW - Chemische Synthese KW - Silicium KW - Silanole KW - Siloxane KW - Übergangsmetall KW - Oxofunktionalisierug KW - DFT KW - silicon KW - silanol KW - siloxane KW - transition metal KW - oxofunctionalization KW - DFT Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181568 ER - TY - THES A1 - Turkin, Arthur T1 - Vom Monomer zum Polymer: Iterative Synthese und optische Spektroskopie von Squarain-Oligomeren T1 - From Monomer to Polymer: Iterative Synthesis and Optical Spectroscopy of Squaraine-Oligomers N2 - Mittels einer Schutzgruppenstrategie wurden Squarain-basierte monodisperse Oligomere synthetisiert. Die lösungsmittelabhängigen Konformationen (Random Coil vs. Helix) wie auch der Faltungsprozess der Homooligomere wurden mittels optischer Spektroskopie, verschiedener NMR-Experimenten, Kleinwinkelneutronenstreuungsexperimenten sowie quantenchemischen Berechnungen näher beleuchtet. Die optisch-spektroskopischen Beobachtungen wurden mithilfe der Exzitonenkopplungstheorie und einer Orientierungs- und Winkelabhängigkeit der Übergangsdipolmomente der Oligomere erklärt. Der hohe Windungsabstand der helikalen Konformation führt zu einer Interkalation von Lösungsmittel, wodurch eine Art Klathrat gebildet wird. Zusätzlich wurden mittels eines Frenkel-Exzitonenmodells die Absorptions- und Fluoreszenzspektren modelliert. Es konnten die Exzitonendelokalisationslängen abgeschätzt und die Auswirkung der energetischen und strukturellen Unordnungen auf die Absorptions- und Fluoreszenzspektren bestimmt werden. Die Absorptionsspektren werden vorwiegend durch strukturelle Unordnungen verbreitert, die Fluoreszenzspektren dagegen von energetischen Übergangsenergieabweichungen. Weiterhin wurden auch alternierende Squarain-Cooligomere synthetisiert und mittels optischer Spektroskopie untersucht. Es wurde, abhängig von dem gewählten Lösungsmittel, eine Verschiebung der Hauptbande beobachtet, was durch einen Random Coil vs. helikale-/schlaufenartige Konformation erklärt wird. Gestützt wurde dies mittels quantenchemischen Berechnungen der jeweiligen Konformationen. Abschließend wurden alternierende Squarain-Copolymere synthetisiert, in verschiedenen Größen aufgetrennt und mittels optischer Spektroskopie untersucht. Mittels EEI2D-Experimenten wurde die Exzitonendynamik in Abhängigkeit von der Kettenlänge eingehender untersucht. Hierbei wird eine steigende, aber relativ abnehmende Kohärenzlänge bestimmt, die Auswirkungen auf die Exzitonendynamik hat. Der Exzitonentransport weist erst wellenförmiges und dann subdiffuses Verhalten auf. N2 - A protecting group strategy was employed to synthesise squaraine-based monodisperse oligomers. The solvent-dependent conformations (random coil vs. helix) as well as the folding process of the homooligomers were examined in more detail using optical spectroscopy, various NMR experiments, small-angle neutron scattering experiments, and quantum chemical calculations. The optical-spectroscopic observations were explained using exciton coupling theory and an orientation and angle dependence of the transition dipole moments of the oligomers. The high pitch of the helical conformation leads to solvent intercalation, thereby forming a type of clathrate. In addition, the absorption and fluorescence spectra were modeled using a Frenkel exciton model. The exciton delocalization lengths were estimated and the effect of the energetic and structural disorders on the absorption and fluorescence spectra were determined. The absorption spectra are mainly broadened by structural disorder, while the fluorescence spectra are broadened by energetic transition energy deviations. Alternating squaraine cooligomers were also synthesised and analysed by optical spectroscopy. Depending on the chosen solvent, a shift of the main band was observed, which is explained by a random coil vs. helical/loop-like conformation. This was supported by quantum chemical calculations of the respective conformations. Finally, alternating squaraine copolymers were synthesised, separated into different sizes and analysed by optical spectroscopy. Exciton dynamics as a function of chain length were investigated in more detail using EEI2D experiments. Here, an increasing but relatively decreasing coherence length was determined, which affects the exciton dynamics. The exciton transport shows wavelike and then sub-diffusive behaviour. KW - Squarain KW - Oligomere KW - Polymere KW - Helix-Knäuel-Umwandlung KW - Chemische Synthese KW - Optische Spektroskopie KW - Squarain-Farbstoff KW - Helix-Knäuel-Umwandlung KW - J- and H-Aggregate KW - Optical Spectroscopy KW - Squaraine-Dye KW - J- and H-Aggregates KW - Helix-Coil-Transition Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-257950 ER - TY - JOUR A1 - Tacke, Reinhold A1 - Wiesenberger, Frank T1 - (Acetoxymethyl)methylphenylgerman: Synthese, thermisches Verhalten und olfaktorische Eigenschaften T1 - (Acetoxymethyl)methylphenylgermane: Synthesis, Thermal Behaviour and Olfactoric Properties N2 - No abstract available. KW - Chemische Synthese KW - Temperaturabhängigkeit KW - Olfaktorische Analyse KW - (Acetoxymethyl)methylphenylgermane KW - (Acetoxymethyl)methylphenylsilane KW - hydratropyl acetate KW - thermal stability KW - perfumes Y1 - 1991 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-86927 ER - TY - JOUR A1 - Tacke, Reinhold A1 - Link, Matthias A1 - Joppien, Hartmut A1 - Ernst, Ludger T1 - Sila-Substitution des Akarizids Fenbutatinoxid und einiger seiner Derivate: Synthese und Eigenschaften von Hexakis[(dimethylphenylsilyl)methyl]distannoxan und Tris[(dimethylphenylsilyl)methyl](1,2,4-triazol-1-yl)stannan T1 - Sila-substitution of the Acaricide Fenbutatinoxide and some of its derivatives: synthesis and properties of Hexakis[(dimethylphenylsilyl)methyl](1,2,4-triazol-1-yl)stannane N2 - No abstract available. KW - Chemische Synthese KW - Akarizid KW - sila-substitution KW - fenbutatinoxide KW - hexasila-fenbutatinoxide KW - acaricides KW - syntheses Y1 - 1986 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-86937 ER - TY - THES A1 - Schmitz, Jens T1 - Synthese von Liganden muscarinerger Rezeptoren - Allostere Modulatoren, bivalente Agonisten und Antagonisten T1 - Synthesis of ligands of muscarinic receptors - Allosteric modulators, bivalent agonists and antagonists N2 - Die vorliegende Arbeit befasst sich mit der Synthese von Liganden muscarinerger Rezeptoren, die zur Superfamilie der G-Protein-gekoppelten Rezeptoren gehören. Die fünf Muscarinrezeptor-Subtypen weisen im Bereich der orthosteren Bindungsstelle, an die u. a. der endogene Ligand Acetylcholin bindet, einen hohen Konservierungsgrad der Aminosäuresequenz auf. Alle Muscarinrezeptoren weisen neben der orthosteren Bindungsstelle auch eine oder mehrere allostere Bindungsstellen auf. Da diese sich im weniger konservierten extrazellulären Bereich des Rezeptors befinden, ist es möglich subtypspezifische Liganden zu entwickeln. Allostere Modulatoren binden an diese topographisch andere Stelle des Rezeptors und sind in der Lage, gezielt die Bindung eines orthosteren Agonisten oder Antagonisten zu modulieren. Dies bedeutet, dass sie die Assoziation und die Dissoziation orthosterer Agonisten und Antagonisten beeinflussen können. Die Gleichgewichtsbindung des Orthosters kann erhöht (d. h. positive Kooperativität), erniedrigt (d. h. negative Kooperativität) bzw. nicht beeinflusst (d. h. neutrale Kooperativität) werden. Das Ziel der Arbeit bestand zunächst darin, die Synthese allosterer Modulatoren des M2-Rezeptors vom Bis(ammonium)alkan-Typ, wie W84 und Naphmethonium, zu optimieren. Da die Synthesen dieser bisquartären Verbindungen zeitaufwändig sind, wurden die Synthesen durch Einsatz einer Synthesemikrowelle optimiert, um neue Bis(ammonium)alkan-Verbindungen effizienter synthetisieren zu können. Der Vergleich beider Synthesemethoden (konventionell bzw. Mikrowellen-unterstützt) zeigt sehr deutlich, dass die Reaktionszeiten durch Einsatz einer Synthesemikrowelle drastisch verkürzt werden konnten, insbesondere bei Verbindungen, die sehr lange Reaktionszeiten beanspruchen. Zusätzlich konnten die Ausbeuten aller synthetisierten Verbindungen durch Mikrowellen-unterstützte Synthese z. T. deutlich gesteigert werden. Im Verlauf der Arbeit wurden unsymmetrisch und symmetrisch nitrosubstituierte Bisnaphthalimide hergestellt. Durch Mikrowellen-unterstützte Hydrierung unter Palladium/Kohle-Katalyse wurden anschließend die analogen aminosubstituierten Derivate erhalten. Ein weiteres Ziel der Arbeit bestand darin, ein Naphmethonium-Derivat herzustellen, das über einen Spacer mit einem geeigneten Fluoreszenzfarbstoff gekoppelt werden kann. Ein Farbstoff-markierter allosterer Modulator könnte als ein wichtiges pharmakologisches Werkzeug zur direkten Charakterisierung allosterer Interaktionen und zur Verfolgung des „Rezeptor-Traffickings“ mittels Fluoreszenzkorrelations-spektroskopie genutzt werden. Als Spacer diente eine Alkylkette mit endständiger primärer Aminofunktion, die mit Alexa-Fluor 532 gekoppelt werden sollte. Zur Einführung des Spacers wurden verschiedene Strategien verfolgt. Schließlich konnte Verbindung 3h über eine Chlorzwischenstufe hergestellt werden, über deren freie primäre Aminogruppe der Fluoreszenzfarbstoff in weiteren Arbeiten gekoppelt werden kann. Ein weiteres Ziel der Arbeit war die Syntheseoptimierung des hochpotenten unselektiven Agonisten Iperoxo, das eine für akademische Zwecke wichtige Substanz in der pharmakologischen Testung und ein wichtiges Zwischenprodukt in der Synthese bivalenter Agonist/Alloster-Hybridverbindungen ist. Die Ausbeuten aller Stufen konnten erhöht und die Gesamtausbeute signifikant von 13% auf 22% gesteigert werden. Außerdem wurden neue Agonisten hergestellt, die sich im Heterozyklus unterscheiden. Ein weiteres Ziel der Arbeit war die Synthese bivalenter Hybridverbindungen nach dem Nachrichten-Adressen-Modell von Schwyzer. Zum einen sollten Agonist/Alloster-Hybridverbindungen synthetisiert werden, wobei die in der Literatur beschriebene Hybridverbindung Hybrid 1 (W84 und Iperoxo) als Leitstruktur diente. So wurde im ersten Schritt eine auf der allosteren Seite verkürzte Substanz ohne Phthalimidopropyl-Rest hergestellt (Hexamethonium und Iperoxo). Danach wurden verschiedene Funktionalitäten an der lateralen quartären Ammoniumfunktion eingeführt. Daneben wurden erstmals Antagonist/Alloster-Hybridverbindungen hergestellt, die aus einem M2-selektiven allosteren Modulator (W84, Naphmethonium bzw. Hexamethonium) und einem subtypunspezifischen Antagonisten (Atropin bzw. Scopolamin) bestehen. Im ersten Schritt wurde der allostere Molekülteil nach der optimierten Mikrowellen-unterstützten Synthese hergestellt. Die erhaltenen Zwischenstufen 2 wurden im Anschluss mit Atropin und Scopolamin in Acetonitril umgesetzt und die Antagonist/Alloster-Hybridverbindungen 34 und 35 erhalten. Die pharmakologische Testung der synthetisierten Verbindungen erfolgte durch Radioligandbindungsstudien an Herzventrikelgewebe des Hausschweins. Der allostere Effekt der Testsubstanzen wurde indirekt über die Verzögerung der Dissoziation des radioaktiv markierten orthosteren Antagonisten [3H]N-Methylscopolamin. N2 - The present work focussed on the synthesis and characterisation of ligands of muscarinic receptors belonging to the superfamily of G-protein-coupled receptors. The five known subtypes of muscarinic receptors (M1-M5) are located ubiquitary in the mammalian organism and participate in many physiological procedures. The endogenous ligand acetylcholine and classical antagonists bind to the orthosteric binding site, which is located deeply in the receptor channel and exhibit a highly conserved amino acid sequence. Allosteric modulators bind to a topographically different site than classical orthosteric ligands. The allosteric binding sites are located in the external loops of the receptor protein. Since these regions exhibit a less conserved structure it is possible to design allosteric modulators capable of binding selectively to specific subtypes and modulating the efficiency of the orthosteric ligand. An allosteric modulator has the ability to affect equilibrium binding of the orthosteric agonist or antagonist: equilibrium binding can either be increased (= positive cooperativity), decreased (= negative cooperativity) or left unaltered (= neutral cooperativity). One intention of this work was to optimize the synthetic pathway to bis(ammonio)alkane-type allosteric modulators of the M2-receptor, like W84 or naphmethonio. The syntheses to these bisquaternary compounds are time consuming. In order to obtain new potent bis(ammonio)alkane-compounds the syntheses were optimized by using a microwave oven. Comparing the conversion times of conventional and microwave-assisted heating revealed a substantially speed up in the synthetic pathway particularly for the reactions which took the longest under conventional reflux conditions. Additionally, the yields of all synthesized compounds could be increased by means of microwave-assisted synthesis. In this work symmetrical and non-symmetrical nitro-substituted bisnaphthalimides were synthesized and the analogue amino-substituted compounds were obtained by microwave-assisted hydrogenation afterwards. A further aim of this work was to synthesize a naphmethonio-derivative which is suitable for a connection to a fluorescent dye. A fluorescent naphmethonio-derivative may help to characterize allosteric interactions directly and trace receptor trafficking by means of fluorescence correlation spectroscopy. Firstly, a primary amino group should be connected via an alkyl-spacer to the allosteric modulator and secondly, this intermediate should be combined with the fluorescent dye alexa-fluor-532. Several strategies were prosecuted. Finally, the synthesis of compound 3h via a chloride-intermediate was successful. Another intention of this work was to optimize the synthetic pathway to the non-selective muscarinic agonist iperoxo, which is an important reference compound in the pharmacological testing and an intermediate in the synthetic pathway of bivalent agonist/allosteric modulator hybrid compounds. The yields in each reaction step were enhanced and the total yield was increased from 13 % to 22 %. Furthermore, other muscarinic agonists differing in the substitution pattern of the heterocycle were synthesized. A further aim of this work was to synthesize bivalent hybrid compounds combining an orthosteric and an allosteric ligand in one molecule. Following Schwyzer´s concept of hybrid compounds containing an “address” skeleton that binds selectively to a receptor subtype and a non-selective “message” moiety inducing agonism or antagonism, a group of hybrid hexamethonio-type derivatives has been designed as subtype selective agonists and antagonists. Hybrid 1 served as a lead for the agonist/allosteric modulator-hybrid compounds synthesized in this work. Firstly, the goal was to combine the agonist iperoxo with hexamethonio and secondly, to introduce a different substitution pattern at the lateral quaternary ammonio-group in the obtained iperoxo/hexamethonio-hybrid compound 27a. Another aim of this work was to synthesize antagonist/allosteric modulator hybrid compounds. Therefore, the classical antagonists atropine and scopolamine were connected with the allosteric agents W84, naphmethonio and hexamethonio via hexyl-spacer. The pharmacological testing of all compounds was accomplished by radioligand binding studies in homogenates of porcine heart ventricles. The resulting allosteric effect was determined by measuring the inhibition of the dissociation of the radioactive marked orthosteric antagonist [3H]N-methylscopolamine ([3H]NMS). In equilibrium binding studies information about the affinity of the allosteric modulators to the free receptor and about the cooperativity between the allosteric and the orthosteric ligand was obtained. KW - Chemische Synthese KW - Muscarinrezeptor KW - Bivalente Hybridverbindungen KW - Allostere Modulation KW - GPCR KW - bivalent hybrid compounds KW - allosteric modulation KW - GPCR Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28390 ER - TY - THES A1 - Schad, Caroline T1 - Synthese und Testung neuartiger peptidomimetischer, selektiver Inhibitoren parasitärer Cystein-Proteasen T1 - Synthesis and testing of new peptidomimetic, selective inhibitors of parasitic cysteine proteases N2 - Parasitäre Protozoen wie Leishmanien, Trypanosomen und Plasmodien weisen eine Vielzahl von Cystein-Proteasen der Papainfalimilie (CAC1) auf, welche als Pathogenitäts- und Virulenzfaktoren identifiziert werden konnten. Die aktuell eingesetzten Medikamente zur Behandlung der von diesen Parasiten hervorgerufenen Infektionskrankheiten (Leishmaniose, Afrikanische Schlafkrankheit, Chagas-Krankheit, Malaria) sind aufgrund von Nebenwirkungen, hohen Kosten und sich entwickelnden Resistenzen suboptimal. Die parasitären Cystein-Proteasen stellen daher potentielle Targets zur Entwicklung neuer Therapieansätze dar. Das angestrebte Ergebnis der Entwicklung ist es, selektive Inhibitoren der parasitären Proteasen zu entwickeln, während die Wirt-Proteasen unbeeinflusst bleiben. Ziel der vorliegenden Arbeit war die Optimierung der literaturbekannten Aziridin-2,3-dicarboxylat-basierten Inhibitoren RV122C (Boc-(S)-Leu-(R)-Pro-(S,S)-Azi(OBn)2) und RV212C (Boc-(R)-Leu-(S)-Pro-(S,S)-Azi(OBn)2) sowie des Michael-Akzeptor-basierten Inhibitors 16a (Boc-(S)-Phg-(S)-vGln(Trt)-OEt) hinsichtlich ihrer selektiven inhibitorischen Aktivität an parasitären Cystein-Proteasen. Bei allen synthetisierten Verbindungen handelt es sich um potenziell irreversible, kovalente und kompetitive Inhibitoren. Der Aziridinring und das Michael-System stellen elektrophile Bausteine dar, die von dem nucleophilen Thiolatrest des aktiven Zentrums einer Cystein-Protease angegriffen werden und in der irreversiblen Alkylierung des aktiven Zentrums resultieren. Die Testung der synthetisierten Verbindungen erfolgte mittels fluorimetrischer und photometrischer Enzymassays. Zur Evaluierung der biologischen Aktivitäten wurden ggf. weitere biologische Testungen durchgeführt. Die Leitstrukturen RV122C und RV212C der Aziridinylpeptide wurden als Inhibitoren von Proteasen der Cathepsin-L-Subfamilie identifiziert. Eine zweite Serie von Stereo- und Konstitutionsisomeren von RV122C und RV212C brachte ein Derivat hervor, CS09 (Boc-(S)-Leu-(R)-Pro-(R,R)-Azi(OBn)2), welches selektive Inhibition von parasitären Cystein-Proteasen aufwies, ohne humanes Cathepsin L zu hemmen. Neben leishmanizider Aktivität weisen sowohl RV122C und RV212C als auch CS09 keine Toxizität an den eingesetzten Zelllinien auf. Daher erfolgte die Fokussierung auf Untersuchungen in Leishmania major zur detaillierten Aufklärung zellulärer Effekte in vitro und in vivo. Der ausgelöste Zelltot wurde als Apoptose-ähnlich charakterisiert, welcher durch unvollständige Verdaunung in Lysosom-ähnlichen Vakuolen hervorgerufen wurde. In-vivo-Untersuchungen im Mausmodell zeigten, dass es das Ziel sein muss, Inhibitoren mit Selektivität insbesondere für die Cathepsin-B-ähnliche LmajcatB zu entwickeln. Ausgehend von CS09 als neue Leitstuktur wurden verschiedene Variationen zur Strukturoptimierung vorgenommen, um im Anschluss Struktur-Wirkungs-Beziehungen ableiten zu können. Die Synthese erfolgte mittels Fragmentkupplung der zuvor stereoselektiv dargestellten Aziridin-Bausteine und der durch Standard-Peptidkupplungsreagenzien erhaltenen Aminosäure/Peptidbausteine. Die N-Acylierung wurde mittels des Kupplungsreagenzes PPA optimiert. Schließlich wurden die Verbindungen an den Cystein-Proteasen Cathepsin L, Cathepsin B, Cathepsin K, Cathepsin S, LmCPB2.8, LmajcatB, Rhodesain, Cruzain und Falcipain-2 auf ihre inhibitorische Aktivität getestet. Weiterhin wurden die Verbindungen im Rahmen der interdisziplinären Zusammenarbeit innerhalb des Sonderforschungsbereichs 630 auf ihre antiparasitäre Aktivität an Leishmanien, Trypanosomen und Plasmodien sowie auf ihre Cytotoxizität an der Makrophagenzelllinie J774.1 getestet. Vertreter dieser Serie erwiesen sich, ebenso wie CS09, als selektive Inhibitoren parasitärer, Cathepsin-L-ähnlicher Proteasen (LmCPB2.8, Rhodesain, Cruzain) und der Cathepsin-B-ähnlichen Protease (LmajcatB). Sehr gute Hemmung der Cathepsin-L-ähnlichen Protease LmCPB2.8 riefen Stereo- und Konstitutionsisomere von CS09 hervor, als auch Derivate, bei denen der Leucinrest gegen andere lipophile Reste mit ähnlichem oder größerem sterischen Anspruch substituiert ist. Die beste Inhibition des Cathepsin-B-ähnlichen Enzyms erfolgte durch Konstitutionsisomere von CS09 und durch Aziridinylpeptide, deren Prolinrest gegen einen Ornithin- oder einen Argininrest ersetzt wurde. Besonders hervor sticht CS25 (Boc-(S)-Ile-(R)-Pro-(R,R)-Azi(OBn)2), sich auszeichnend durch selektive Inhibition der LmajcatB (neben Cathepsin S) bei sehr guter leishmanizider Aktivität. Auch zeigen einige Vertreter selektive Hemmung von Rhodesain und/oder Cruzain. Mithilfe eines synthetisierten Aziridinylpeptids, welches bromierte Benzylesterreste trägt und sehr gute Hemmeigenschaften an parasitären Cystein-Proteasen aufweist (CS38), sollte die Kristallisation mit Rhodesain erfolgen, um die erste Röntgenstruktur eines Enzym-Aziridin-Inhibitor-Komplexes zu erhalten. Dieses Ziel konnte jedoch nicht realisiert werden. Aufgrund fehlender Röntgenstrukturen von Enzym-Inhibitor-Komplexen ist die Bindung der synthetisierten Inhibitoren noch immer spekulativ. Dockingstudien an Cruzain schlagen verschiedene Bindemodi vor, bei denen zwei von drei lipophilen Resten die hydrophoben S2- und S1´-Bindungstaschen adressieren. Die Mehrzahl der Aziridin-basierten Verbindungen konnte als leishmanizide und/oder trypanozide Verbindungen identifiziert werden. Mithilfe eines Biotin-markierten Derivats von RV122C (CS39) konnte durch active-site labeling nachgewiesen werden, dass Cystein-Proteasen von L.-major-Promastigoten die Targets des Inhibitors sind. Active-site-labeling und Untersuchungen durch Fluoreszenzaktivitätsassays mit L.-major-Promastigotenlysaten machten deutlich, dass bei Einsatz von RV122C und RV212C Cathepsin-B-ähnliche Proteasen beeinflusst werden. CS09 wies einen anderen Wirkmechanismus – ähnlich dem von E-64 – auf, wie Fluoreszenzaktivitätsassays zeigten. Hinsichtlich der Aufklärung dieser zellulären Effekte und zur Identifizierung weiterer möglicher Targets wurde ein Fluoreszenzfarbstoff-markierter Aziridin-Inhibitor (CS40) dargestellt. CS40 wies hervorragende Hemmeigenschaften an den isolierten Enzymen auf, war jedoch für In-vitro-Untersuchungen ungeeignet, da weder leishmanizide noch trypanozide Aktivität vorlagen. Durch antiplasmodiale Wirkung ist CS40 lediglich zu In-vitro-Studien an Plasmodien einsetzbar. Für In-vitro-Studien wurde zur Aufklärung des Wirkmechanismus der Aziridin-2,3-dicarboxylat-basierten Inhibitoren der literaturbekannte, für Cathepsin-L-ähnliche Enzyme selektive, Epoxid-basierte Standardinhibitor CLIK-148 als Vergleichssubstanz dargestellt. Zum Beweis der Inaktivität des Diastereomers von CLIK-148 mit (R,R)-konfiguriertem Epoxidring wurde zudem das Derivat CS41 synthetisiert. Die Synthese hierzu erfolgte zunächst über die stereoselektive Darstellung der trans-konfigurierten Diethyloxiran-2,3-dicarboxylate, die nach Verseifung der Ethylesterfunktionen mittels Peptidkupplungsreagezien mit den entsprechenden Aminen gekuppelt wurden. Zur Ableitung der Struktur-Wirkungs-Beziehung von Michael-Akzeptor-basierten Verbindungen wurde die Leitstruktur 16a durch Variation der Konfigurationen sowie durch Substitution der Trityl-Schutzgruppe der Glutaminseitenkette durch sterisch weniger anspruchsvolle Schutzgruppen verändert. Die Synthese erfolgte ausgehend von der Darstellung des entsprechenden Dipeptids mit Methylesterschutzgruppen. Ausgehend davon wurden die Methylesterreste entweder mit DIBAL zum entsprechenden Aldehyd reduziert oder aus Gründen der Praktikabilität zum entsprechenden Alkohol reduziert, um anschließend in einer Swern-Oxidation den Aldehyd zu liefern. Die Aldehyde wurden im finalen Schritt in einer Masamune-Reaktion mit Triethylphosphonoacetat zu den vinylogen Dipeptidestern umgesetzt. Die Stereoisomere CS42 und CS43 mit Tritylresten an der Glutaminseitenkette sind unspezifische, starke Inhibitoren humaner und parasitärer Enzyme. In vitro zeigten sie starke Hemmung des Parasiten-Wachstums als auch Cytotoxizität an Makrophagen. Die Verbindungen ohne Tritylrest (CS44, CS45) erwiesen sich weder als Proteaseinhibitoren, noch in vitro als wirksam. Ferner wurden mit den synthetisierten Verbindungen in interdisziplinären Kooperationen weitere biologische Testungen durchgeführt. In Selektivitätsstudien an den Aspartat-Proteasen Plasmepsin II und IV erwiesen sich die getesteten trans-konfigurierten Aziridin-basierten Inhibitoren als inaktiv, während die Leitstruktur der Michael-Akzeptor-basierten Inhibitoren 16a sowie deren Distereomer CS42 (= 16b) als Inhibitoren von Plasmepsin IV identifiziert werden konnten. Weder in Testungen an Plasmodium berghei infizierten humanen Hepatomzellen in Leberstadien, noch im Blut-Hirn-Schrankenmodell einer Trypanosoma-brucei-gambiense-Infektion sowie im In-vitro-Screening an Trichomonas vaginalis zeigten die jeweils getesteten Verbindungen Aktivität. Allein die Aziridin-2,3-dicarboxylat-basierten Cystein-Protease-Inhibitoren wiesen Wirksamkeit bezüglich des Wachstums von Schistosoma mansoni auf. In einem visuellen Phänotyp-Screening inhibierte eine Vielzahl der getesteten Verbidungen das Wachstum der jungen Form (Schistosomula), im zweiten Schritts des In-vitro-Screenings zeigte sich jedoch keine Verbindung aktiv an der adulten Form (Schistosomen) des Parasiten. N2 - Protozoan parasites contain an abundance of cysteine proteases of the papain family (CAC1), which are essential for parasite growth, differentiation, pathogenicity and virulence. Therefore they are attractive targets for the development of new, affordable, alternative drugs, because current therapy for infectious diseases like leishmaniasis, African trypanosiasis, Chagas disease or malaria is suboptimal due to toxicity of available therapeutic agents and the emergence of drug resistence. Protease inhibitors have to be selective inactivators of parasitic proteases, while not affecting mammalian proteases in order to become an antiparasitic drug. The main goal of this work was the optimization of the aziridine based inhibitors RV122C (Boc-(S)-Leu-(R)-Pro-(S,S)-Azi(OBn)2) and RV212C (Boc-(R)-Leu-(S)-Pro-(S,S)-Azi(OBn)2) and of the Michael acceptor based inhibitor 16a (Boc-(S)-Phg-(S)-vGln(Trt)-OEt), regarding their ability of selective inhibition of parasitic proteases. All synthesized substances are designed as irreversible, covalent, and competitive inhibitors, in which the aziridine ring and the Michael system represent electrophilic building blocks. The reaction of the electrophilic moieties with the nucleophilic thiolate of the active site results in the irreversible alkylation of the protease. The synthesized compounds were subsequently tested in fluorimetric or photometric enzyme assays, in some cases followed by further biological evaluation. The aziridines RV122C and RV212C could be identified as inhibitors of the cathepsin L subfamily. Starting from RV122C and RV212C as lead structures, a new series containing structural isomers, stereoisomers and derivatives with ethyl esters was synthesized. The most promising candidate of this series was CS09 (BOC-(S)-Leu-(R)-Pro-(R,R)-Azi(OBn)2), showing selective inhibition of the parasitic cysteine proteases, while not affecting mammalian cathepsin L. Besides antileishmanial activity, RV122C and RV212C as well as CS09 do not exhibit cytotoxicity against host cells. Therefore, in further investigations the mode of action of these inhibitors was characterized in Leishmania major. An apoptosis-like cell death was induced, which was caused by incomplete digestion in autophagy-related lysosome-like vacuoles. In vivo a mouse model of Leishmania infection showed, that the cathepsin-B-like enzyme LmajcatB should be targeted by the inhibitors in further investigations. Based on CS09 as a new lead structure, further derivatives were synthesized with structural modifications for structure-activity relationship (SAR) studies. The syntheses were achieved via fragment coupling of the prior stereoselectively synthesized aziridine-2,3-dicarboxylates with the appropriate aminoacids/peptids. PPA was used as coupling reagent of the N-acylation. Subsequently the compounds were tested for inhibition of cathepsin L, cathepsin B, cathepsin K, cathepsin S, LmCPB2.8, LmajcatB, rhodesain, cruzain and falcipain-2. Within the Collaborative Research Center 630 of the University of Würzburg the compounds were tested in regard of their antiparasitic activity and cytotoxicity. Compounds out of this series showed selective inhibition of parasitic cathepsin-L-like proteases (LmCPB2.8, rhodesain, cruzain) and cathepsin-B-like proteases (LmajcatB). Best inhibitors of LmCPB2.8 are the structural isomers and stereoisomers of CS09 and derivatives with other, sterically hindered, lipophilic moieties instead of the leucine moiety. LmajcatB was best inhibited by structural isomers of CS09 and by derivatives with ornithine or arginine moieties attached to the proline moiety. CS25 (Boc-(S)-Ile-(R)-Pro-(R,R)-Azi(OBn)2) should be highlighted, because of selective inhibition of LmajcatB (besides Cathepsin S) and outstanding antileishmanial activity. Some compounds showed selective inhibition of rhodesain and/or cruzain. In order to obtain the first X-ray structure of an enzym-aziridine-inhibitor-complex, an aziridine-2,3-dicarboxylate-based inhibitor with brominated benzyl esters was synthesized (CS38). CS38 displayed excellent inhibition of cysteine proteases, but the cristallisation with rhodesain failed. Because of missing X-ray structure investigations, the binding mode of the aziridine-based inhibitors is still unclear. Docking studies suggested several binding modes, where three out of two lipophilic residues adress the hydrophobic S2 and the S1´ binding pockets. The majority of the aziridine based inhibitors could be identified as antileishmanial and/or antitrypanosomal agents. As shown by fluorescence proteinase activity assays and active-site labeling in lysates of promastigotes with the biotin-tagged derivate of RV122C, CS36, RV122C and RV212C both targeted leishmanial cathepsin-B-like LmajcatB. By contrast, CS09 caused a different outcome in fluorescence proteinase activity assays, similar to the outcome observed with E-64. With respect to elucidate further cellular effects and to determine potential further targets via fluorescence microscopy, an aziridine was labeled with a fluorescent dye (CS40). CS40 showed very good inhibition of the cysteine proteases, but was not usefull for in-vitro-investigations, because of missing antileishmanial and also antitrypanosomal activity. Because of antiplasmodial activity, CS40 can be used in vitro with Plasmodia. The literature known cathepsin-L-selective, oxirane-based inhibitor CLIK-148 was synthesized in order to use it in comparison to the aziridine-based inhibitors in vitro. The derivative of CLIK-148 with (R,R)-konfigured oxirane ring (CS41) was also synthesized. As expected from literature data, CS41 did not show inhibition of any enzyme tested. The trans-konfigured diethyl oxirane-2,3-dicarboxylates were stereoselectively synthesized and in the following steps after alkaline hydrolysis brought to reaction with the corresponding amines. To investigate SAR of Michael acceptor based inhibitors, the lead structure 16a was modified structurally. Synthesis started with preparing the methyl ester dipeptides via peptide coupling methods. Subsequently the aldehyds were synthesized either via DIBAL reduction directly to the aldehyde or via DIBAL reduction to the alcohol, followed by Swern oxidation to the corresponding aldehyde. The last step led to the products via a Masamune reaction with triethylphosphono acetate. Michael acceptors containing a trityl group in the side chain of the glutamine residue are strong and unspecific inhibitors of human and parasitic proteases (CS42, CS43). Furthermore they are active against parasites in vitro, but they are also cytotoxic. Michael acceptors containing a benzhydryl group or an isopropyl group instead of the trityl group didn´t show inhibitory potency against the enzymes tested and parasite growth (CS44, CS45). Further biological tests were performed with the synthesized compounds. In contrast to the Michael acceptor based compounds CS42 and CS43 non of the aziridine based inhibitors showed inhibition of the aspartic proteases plasmepsin II and IV. No activity could be detected in tests concerning liver-stage development of Plasmodium berghei, a model of a blood-brain barrier of infection with Trypanosoma brucei gambiense, nor in an in vitro screening with Trichomonas vaginalis. In a phenotypic screening with Schistosoma mansoni, aziridine-2,3-dicarboxylate-based inhibitors showed inhibition of the juvenile parasites (schistosomula). In the second step, they were screened in vitro against adult parasites, but no inhibitor was active in that assay. KW - Proteaseinhibitor KW - parasitär KW - parasitic KW - peptidomimetisch KW - peptidomimetic KW - Chemische Synthese KW - Peptidomimetikum KW - Protozoen Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90973 ER - TY - THES A1 - Roos, Lena T1 - Synthese unterschiedlicher Tetracene und Untersuchung ihrer optischen und elektronischen Eigenschaften T1 - Synthesis of tetracene derivatives and investigation of their optical and electronical properties N2 - Mittels einer fünfstufigen Synthese wurde das 2,2´-Ditetracen als Modellsystem zur Erforschung von singlet fission-Prozessen hergestellt. Die Synthese wurde mit einer Gesamtausbeute von 21 % durchgeführt, wobei der Schlüsselschritt, die Kopplung der beiden Monomere, durch eine Suzuki-Kopplung erfolgte. Das gewünschte Produkt konnte nach gründlicher Reinigung mittels Gradientensublimation als leuchtend rote Einkristalle erhalten werden. Während die Emissionsspektren der Einzelmoleküle nahezu identisch sind, zeigen Untersuchungen mittels Photolumineszenzspektroskopie eine Rotverschiebung im Emissionsspektrum des Dimer-Einkristalls im Vergleich zum Einkristall des Tetracen-Monomers. Durch theoretische Berechnung konnte die Absenkung des S1-Zustands des Dimers im Kristall erklärt werden, wodurch die Energiebedingung für singlet fission (2 E(T1) ≤ E(S1)) nicht mehr erfüllt ist. Weiterhin wurden mehrere mit Alkylgruppen und Vinylgruppen substituierte Tetracenderivate synthetisiert und diese mittels optischer und elektrochemischer Methoden auf ihre Eigenschaften hin untersucht. Es wurde bei allen synthetisierten Derivaten eine Rotverschiebung der Hauptbanden im Absorptionsspektrum beobachtet, was durch einen kleineren HOMO-LUMO-Abstand im Vergleich zum nicht substituierten Tetracen erklärt wird. Es wurde zudem eine erhöhte Stabilität dieser Derivate gegenüber Umwelteinflüssen wie Licht und Sauerstoff, die die Bildung von Endoperoxiden und Dimeren zur Folge haben, festgestellt. Dies kann auf sterische Effekte sowie die Stabilisierung des biradikalischen Zustands dieser Moleküle durch Hyperkonjugation und Resonanzeffekte zurückgeführt werden. N2 - In a five-step synthesis, the 2,2'-ditetracene was prepared as a model system to study singlet fission processes. The synthesis was carried out with an overall yield of 21%, and the key step, the coupling of the two monomers, was carried out by a Suzuki coupling. The desired product was obtained as bright red single crystals after purification by gradient sublimation. While the emission spectra of the single molecules are nearly identical, investigations by photoluminescence spectroscopy show a red shift in the emission spectrum of the dimer single crystal compared to the single crystal of the tetracene monomer. Theoretical calculation could explain the lowering of the S1 state of the dimer in the crystal, which means that the energy condition for singlet fission (2 E(T1) ≤ E(S1)) is no longer fulfilled. Furthermore, several with alkyl groups and vinyl groups substituted tetracenes derivatives were synthesized and their properties were investigated by optical and electrochemical measurements. A red shift of the peaks in the absorption spectrum was observed for all synthesized derivatives, which is explained by a smaller HOMO-LUMO distance compared to the unsubstituted tetracene. Increased stability of these derivatives to environmental effects such as light and oxygen, resulting in the formation of endoperoxides and dimers, was also observed. This can be attributed to steric effects as well as stabilization of the biradical character of these molecules by hyperconjugation and resonance effects. KW - Polycyclische Aromaten KW - Naphthacenderivate KW - Chemische Synthese KW - Tetracenderivate KW - Polycyclische aromatische Kohlenwasserstoffe KW - Tetracene derivatives KW - Polycyclic aromatic hydrocarbons KW - singlet fission Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313268 ER - TY - THES A1 - Richter, Rolf Ingo T1 - Beiträge zur Chemie des höherkoordinierten Siliciums: Synthese, Struktur und Eigenschaften neuer Silicate mit SiO 3 C 2 -, SiO 4 C -, SiO 5 - und SiO 6 -Gerüst, Beiträge zur Chemie des tetrakoordinierten Siliciiums: Synthese, Struktur und Eigenschaften von Silanen, Silanolen und Siloxanen T1 - Contributions to the field of penta- and hexacoordinate silicon chemistry: syntheses, structures, and properties of new silicates with SiO3C2-, SiO4C-, SiO5-, and SiO6-skeletons N2 - Die vorliegende Arbeit stellt einen Beitrag zur Siliciumchemie dar — mit einem Schwerpunkt in der Chemie des penta- und hexakoordinierten Siliciums. Die Ergebnisse werden im Folgenden aufgegliedert in vier Themenkomplexe vorgestellt. 7.1 Synthese und Charakterisierung zwitterionischer l5Si-Silicate Im Rahmen der hier vorgestellten Untersuchungen wurden die bisher unbekannten zwitterionischen l5Si-Silicate 3–8 — lösungsmittelfrei oder in Form wohldefinierter Solvate — dargestellt. Erstmals konnte für die Substanzklasse der zwitterionischen l5Si-Spirosilicate an dem bereits bekannten l5Si-Silicat 1 durch 1H-VT-NMR-Experimente die Energiebarriere für die Enantiomerisierung im Sinne einer Berry-Pseudorotation in Lösung bestimmt werden. Durch Hydrolyse von 1 — gefolgt von Kondensationsreaktionen — wurde das neuartige Oktasilsesquioxan 2 dargestellt. Die Charakterisierung aller Verbindungen erfolgte durch Elementaranalysen, 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen (außer 2), 29Si-VACP/MAS-NMR-Spektroskopie an Feststoffen und im Fall der Verbindungen 2, 3×½HO(CH2)2OH, 4×HO(CH2)2OH, 6, 7×3/2C4H8O2 und 8×2CH2Cl2 durch Einkristall-Röntgenstrukturanalysen. Anhand der Synthese von 1 durch Umsetzung von Dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silan mit Ethan-1,2-diol wurde gezeigt, das Ethan-1,2-diol zu einer selektiven Si–C-Spaltungsreaktion (Abspaltung eines Moläquivalents Methan) in der Synthese zwitterionischer l5Si-Spirosilicate in der Lage ist. Durch 1H-VT-NMR-Experimente wurde die Barriere des Enantiomerisierungsprozesses am Silicium-Zentrum von 1 zu 35.3(5) kJ mol–1 bestimmt. Durch Umsetzung von 1 mit Wasser in Methylenchlorid bei Raumtemperatur gelang die Synthese des Aminomethylsubstituierten Octasilsesquioxans 2. Die Synthese der Verbindungen 3–5 erfolgte durch Umsetzung der entsprechenden Trialkoxy[(amino)alkyl]silane mit Ethan-1,2-diol in Substanz (3) oder in Acetonitril (4 und 5). Die bereits bekannte Verbindung 6 wurde zwecks struktureller Charakterisierung resynthetisiert. Durch Umsetzung von Trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]-silan mit Benzoin gelang die Synthese von 7. Mit Verbindung 8 — dargestellt durch Umsetzung von Dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silan mit Brenzkatechin — gelang erstmals die Synthese eines zwitterionischen l5Si-Silicates mit SiO3C2-Gerüst. In siedendem Acetonitril konnte 8 unter Methan-Abspaltung zum bekannten zwitterionischen l5Si-Spirosilicat 9 umgesetzt werden. 7.2 Synthese und Charakterisierung anionischer l5Si-Silicate und dianionischer l5Si,l5Si’-Disilicate mit SiO5-Gerüst Im Rahmen der hier vorgestellten Untersuchungen wurden erstmals die anionischen l5Si-Silicate 11 und 13–15 sowie die dianionischen l5Si,l5Si’-Disilicate 10, 12 und 16 mit SiO5-Gerüst — lösungsmittelfrei oder in Form wohldefinierter Solvate — dargestellt. Die Charakterisierung dieser Verbindungen erfolgte durch Elementaranalysen, 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen, 29Si-VACP/MAS-NMR-Spektroskopie am Festkörper sowie durch Kristallstrukturanalysen [(Δ,Δ/Λ,Λ)-10×2CH3CN, (Λ)-11×THF, meso-12×2CHCl3, 13, 14, 15×2THF und meso-16]. Die Synthesen der l5Si-Silicate 10–13 und 16 erfolgten in aprotischen organischen Lösungsmitteln durch Umsetzung von Tetramethoxysilan mit Benzilsäure, dem entsprechenden Amin und Wasser in dem erforderlichen stöchiometrischen Verhältnis. Das l5Si-[Trimethylsilanolato(1–)]silicat 14 wurde ausgehend von dem Hydroxosilicat 13, Chlortrimethylsilan und Triethylamin in Acetonitril erhalten. Das l5Si-[Methanolato- (1–)]silicat 15 wurde durch die Umsetzung von Tetramethoxysilan mit Benzilsäure und Lithiummethanolat in Tetrahydrofuran dargestellt. Die l5Si,l5Si’-μ-Oxo-disilicate 10, 12 und 16 sind die ersten strukturell charakterisierten Verbindungen, in denen zwei pentakoordinierte Silicium-Atome mit SiO5-Skelett über ein gemeinsames Sauerstoff-Atom miteinander verbrückt sind. Sowohl ihre Reaktivität gegenüber Wasser, als auch ihr stereodynamisches Verhalten in Lösung, das mit 1H- und 13C-VT-NMR-Experimenten untersucht werden konnte, machen diese Verbindungen zu sehr lohnenden Studienobjekten für das Verständnis der Chemie des pentakoordinierten Siliciums. Mit den Verbindungen 11 und 13 wurden erstmals l5Si-Hydroxosilicate zugänglich gemacht und strukturell charakterisiert (unabhängig von einem kürzlich von P. Klüfers et al. veröffentlichten l5Si-Hydroxosilicat). Das l5Si-[Trimethylsilanolato(1–)]silicat 14 ist das erste Beispiel für die Verknüpfung eines pentakoordinierten und tetrakoordinierten Silicium-Atoms durch ein Sauerstoff-Atom und demonstriert die Zugänglichkeit der HO-Funktionaliät des l5Si-Hydroxosilicates 13 für Derivatisierungen. Das l5Si-[Methanolato(1–)]silicat 15 ist als Modellverbindung für die Bildung der l5Si-Hydroxosilicate 11 und 13 von mechanistischem und auch präparativem Interesse. 7.3 Synthese und Charakterisierung dianionischer l6Si-Silicate mit SiO6-Gerüst Im Rahmen der hier vorgestellten Untersuchungen wurden die bisher unbekannten dianionischen l6Si-Silicate 19–21 mit SiO6-Gerüst — lösungsmittelfrei oder in Form wohldefinierter Solvate — dargestellt. Die bereits bekannte Verbindung 18 wurde zwecks Kristallstrukturanalyse resynthetisiert. Die Charakterisierung aller synthetisierten Verbindungen erfolgte durch Elementaranalysen 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen (mit Ausnahme von 19 und 21 [nur 1H- und 13C-NMR-Messungen]), 29Si-VACP/MAS-NMR-Spektroskopie am Festkörper sowie durch Röntgenbeugungs-Experimente an Einkristallen [18·2NH3·2H2O , mer-19, fac-20·½C4H8O2, (R,R/S,S)-21]. Die l6Si-Silicate 19–21 wurden durch Umsetzung von Tetramethoxysilan bzw. Tetrachlorsilan mit drei bzw. zwei Moläquivalenten des entsprechenden Amins dargestellt. Diese Verbindungen stellen die ersten l6Si-Silicate mit deprotonierten α-Hydroxycarbonsäuren als Liganden dar. Verbindung 21 ist darüber hinaus die erste Silicium-Verbindung mit dreizähnigen Citrato(3–)-Liganden. Neben einem allgemein erweiterten Verständnis der Chemie von l6Si-Silicaten mit SiO6-Gerüst geben die untersuchten Verbindungen insbesondere auch neue stereochemische Einblicke in die Koordinationschemie des Siliciums. In wieweit diese hier genannten l6Si-Silicate einen Beitrag zum Verständnis der Siliciumdioxid-Biomineralisation leisten können, bleibt abzuwarten. 7.4 Synthese und Charakterisierung von Verbindungen des tetrakoordinierten Siliciums Im Rahmen der hier vorgestellten Untersuchungen wurden erstmals die Silane 25 und 27 dargestellt, und die Synthesen der bereits bekannten Silicium-Verbindungen 22–24 konnten verbessert werden. Die Charakterisierung von 22–27 erfolgte durch Elementaranalysen 1H-, 13C- und 29Si-NMR-Spektroskopie an Lösungen, 29Si-VACP/MAS-NMR-Spektroskopie am Festkörper (nur 23×EtOAc), sowie durch Röntgenbeugung an Einkristallen (23×EtOAc, 25–27). Eine Verbesserung der Synthese von 22 gelang durch die Umsetzung von 1,2-Bis(diethylamino)-1,1,2,2-tetraphenyldisilan mit Acetylchlorid zum 1,2-Dichlor-1,1,2,2-tetraphenyldisilan und dessen nachfolgende Hydrolyse. Die Kristallisation des macrocyclischen Siloxans 23 konnte verbessert und das Solvat 23×EtOAc durch Röntgenbeugung strukturell charakterisiert werden. Bei der Umkristallisation von 22 wurden auch einzelne Kristalle des entsprechenden Disiloxans 26 erhalten, welches erstmals durch Kristallstrukturanalyse charakterisiert werden konnte. Das Silan 24 wurde auf zwei neuen Synthesewegen dargestellt: zum einen durch Umsetzung von Bis(chlormethyl)diphenylsilan mit Trifuormethansulfonsäure und anschließende Aufarbeitung mit Triethylammoniumchlorid, zum anderen durch Chlormethylierung von Chlor(chlormethyl)bis(diethylamino)silan mittels der Reagenzkombination BrCH2Cl/n-BuLi und anschließende Umsetzung mit Benzoylchlorid. Das Silan 25 wurde ausgehend von Trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]silan durch wiederholte Umsetzung mit Tetrachlorsilan erhalten, und das Silan 27 wurde ausgehend von Tetrachlorsilan durch vierfache Chlormethylierung mittels der Reagenzkombination BrCH2Cl/n-BuLi erhalten. N2 - This Thesis contributes to the field of silicon chemistry, with a special emphasis on the chemistry of penta- and hexacoordinate silicon. The results are summarized in the following four chapters. 8.1 Synthesis and characterization of zwitterionic l5Si-silicates In the course of these investigations, the hitherto unknown zwitterionic l5Si-silicates 3–8 were synthesized — solvent-free or as well-defined solvates. For the first time, the energy barrier for the enantiomerization of zwitterionic l5Si-spirosilicates in terms of a Berry-pseudorotation process could be determined by VT 1H NMR experiments using the already known l5Si-silicate 1. The hydrolysis of 1, followed by condensation reactions, yielded the novel octasilsesquioxane 2. The identities of all compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si; except for 2), and solid-state 29Si VACP/MAS NMR experiments. In addition, compounds 2, 3×½HO(CH2)2OH, 4×HO(CH2)2OH, 6, 7×3/2C4H8O2, and 8×2CH2Cl2 were structurally characterized by single-crystal X-ray diffraction. By means of the synthesis of 1 [obtained by treatment of dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silane with ethane-1,2-diol] it was demonstrated that ethane-1,2-diol can be used for the synthesis of zwitterionic l5Si-silicates via selective Si–C cleavage reactions (elimination of one molar equivalent of methane). For compound 1 the energy barrier for the enantiomerization process at the silicon atom was determined to be 35.3(5) kJ mol–1 (VT 1H NMR experiments). Treatment of 1 with water in dichloromethane at room temperature gave the aminomethyl-substituted octasilsesquioxane 2. Compounds 3–5 were synthesized by reaction of the respective trialkoxy[(amino)alkyl]silane with ethane-1,2-diol using no solvent (3) or using acetonitrile as solvent (4 and 5). The already known compound 6 was resynthesized to characterize it by single-crystal X-ray diffraction. Treatment of trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]silane with benzoin yielded compound 7. Treatment of dimethoxy(methyl)[(2,2,6,6-tetramethylpiperidino)methyl]silan with pyrocatechol gave the first zwitterionic l5Si-silicate with an SiO3C2 skeleton, compound 8. In boiling acetonitrile, 8 undergoes an elimination reaction (formation of methane) to yield the known l5Si-spirosilicate 9. 8.2 Synthesis and characterization of anionic l5Si-silicates and dianionic l5Si,l5Si’-disilicates with SiO5 skeletons In the course of these investigations, the anionic l5Si-silicates 11 and 13–15 and the dianionic l5Si,l5Si’-disilicates 10, 12, and 16 with SiO5 skeletons were synthesized for the first time — solvent-free or as well-defined solvates. The identities of these compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si), and solid-state 29Si VACP/MAS NMR experiments. In addition, compounds (Δ,Δ/Λ,Λ)-10×2CH3CN, (Λ)-11×THF, meso-12×2CHCl3, 13, 14, 15×2THF, und meso-16 were structurally characterized by single-crystal X-ray diffraction. The syntheses of the l5Si-silicates 10–13 and 16 were performed in aprotic organic solvents by treatment of tetramethoxysilane with, benzilic acid, the respective amine, and water, using the required stoichiometry. The [trimethylsilanolato(1–)]silicate 14 was obtained from the hydroxosilicate 13, chlorotrimethylsilane, and triethylamine in acetonitrile. The [methanolato(1–)]silicate 15 was synthesized by treatment of tetramethoxysilane with benzilic acid and lithium methanolate in tetrahydrofuran. The μ-oxo-disilicates 10, 12, and 16 are the first compounds, with two pentacoordinate oxygen-bridged silicon atoms with SiO5 skeletons that could be structurally characterized by single-crystal X-ray diffraction. Both their reactivity toward water and their stereodynamics in solution (studied by VT 1H and 13C NMR experiments) make these compounds unique objects in the study of pentacoordinate silicon compounds. Compounds 11 and 13 are the first pentacoordinate l5Si-hydroxosilicates that have been synthesized and structurally characterized (independently from a l5Si-hydroxosilicate recently published by Klüfers et al.). The l5Si-[trimethylsilanolato(1–)]silicate 14 represents the first example of a compound containing an oxygen-bridged pentacoordinate and tetracoordinate silicon atom. With respect to mechanistic and preparative aspects, the l5Si-[methanolato(1–)]silicate 15 is a model system for the formation of the l5Si-hydroxosilicates 11 and 13. 8.3 Synthesis and characterization of dianionic l6Si-silicates with SiO6 skeletons In the course of these investigations, the dianionic l6Si-silicates 19–21 with SiO6 skeletons were synthesized for the first time — solvent-free or as well-defined solvates. The already known compound 18 was resynthesized for its characterization by crystal structure analysis. The identities of all compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si except for 18, only 29Si NMR for 20), and solid-state 29Si VACP/MAS NMR experiments. In addition, compounds 18·2NH3·2H2O, mer-19, fac-20·½C4H8O2, and (R,R/S,S)-21 were structurally characterized by single-crystal X-ray diffraction. The l6Si-silicates 19–21 were synthesized by reaction of tetramethoxysilane or tetrachlorosilane with two or three molar equivalents of the respective α-hydroxy carboxylic acid and two molar equivalents of the respective amine. Compounds 19–21 represent the first l6Si-silicates with ligands derived from α-hydroxycarboxylic acids. In addition, 21 is the first silicon compound containing tridentate citrato(3–) ligands. Apart from the expanded knowledge about l6Si-silicates with SiO6 skeletons, the compounds studied allow some insight into the stereochemistry of such compounds. It remains an open question as to whether or not l6Si-silicates of this particular formula type have any potential relevance for silicon biochemistry (SiO2 biomineralization). 8.4 Synthesis and characterization of tetracoordinate silicon compounds In the course of these investigations, the silanes 25 and 27 were synthesized for the first time, and the syntheses of the already known compounds 22–24 could be improved. The identities of all compounds were established by elemental analyses (C, H, N), solution NMR studies (1H, 13C, and 29Si), and solid-state 29Si VACP/MAS NMR experiments (23×EtOAc only). In addition, compounds 23×EtOAc and 25–27 were structurally characterized by single-crystal X-ray diffraction. The improved synthesis of 22 was achieved by the reaction of 1,2-bis(diethylamino)-1,1,2,2-tetraphenyldisilane with acetyl chloride to give 1,2-dichloro-1,1,2,2-tetraphenyldisilane, followed by its hydrolysis. The crystallization of the macrocyclic siloxane 23 could be improved, and the solvate 23×EtOAc was structurally characterized by X-ray diffraction. In the course of the crystallization of 22, also crystals of the corresponding disiloxane 26 were obtained that allowed a structural characterization by single-crystal X-ray diffraction. The silane 24 was synthesized by using two novel strategies, (i) the reaction of bis(chloromethyl)diphenylsilane with trifluoromethanesulfonic acid, followed by triethylammonium chloride, and (ii) the chloromethylation of chloro(chloromethyl)bis(diethylamino)silane with BrCH2Cl/n-BuLi, followed by reaction with benzoyl chloride. The silane 27 was synthesized from tetrachlorosilane by a four-fold chloromethylation with BrCH2Cl/n-BuLi. The silane 25 was synthesized from trimethoxy[(2,2,6,6-tetramethylpiperidino)methyl]silane by repeated treatment with tetrachlorosilane. KW - Silicate KW - Silicium KW - Pentakoordination KW - Tetrakoordinierte Verbindungen KW - Chemische Synthese KW - Silicium KW - Pentakoordination KW - Hexakoordination KW - Silane KW - Siloxane KW - silicon KW - pentacoordination KW - hexacoordination KW - silanes KW - siloxanes Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2972 ER - TY - THES A1 - Projahn, Holger T1 - Synthese, Stereochemie und pharmakologische Charakterisierung von 3,7-Diazabicyclo[3.3.1]nonan Derivaten als selektive kappa-Agonisten T1 - Synthesis, stereochemistry and pharmacological characterization of 3,7-diazabicyclo[3.3.1]nonane derivates as selective kappa-agonists N2 - In der vorliegenden Arbeit wird die Synthese von verschiedenen bicyclischen Substanzklassen gemäß des folgenden Syntheseschemas beschrieben. Es wurden verschiedene 2,4-di-(2-pyridyl)- oder 2,4-di-(3-fluorphenyl)-substituierte 9-Oxo-3,7-diazabicyclo[3.3.1]nonan-1,5-dicarbonsäurediester (9-Oxo-BNDS: 21-25, 27-55) synthetisiert, welche 1. teilweise als Vorstufen zur Synthese von 1,5-Di-(hydroxymethyl)-3,7-diazabicyclo[3.3.1]nonan-9-olen (Triole: 56-65) eingesetzt wurden, 2. teilweise als Vorstufen zur Synthese von 9-Hydroxy-3,7-diazabicyclo[3.3.1]nonan-1,5-dicarbonsäuredimethylestern (9-OH-BNDS: 66-69) verwendet wurden, die ihrerseits zu 9-O-Acyl-3,7-diazabicyclo[3.3.1]nonan-1,5-dicarbonsäuredimethylestern (9-OAc-BNDS: 70-76) umgesetzt wurden oder 3. als Vorstufe zur Synthese der 9-Oxo-3,7-diazabicyclo[3.3.1]nonan-1,5-dicarbonsäure 26 dienten. Die 9-Oxo-BNDS wurden aus den kommerziell erhältlichen Aceton-1,3-dicarbonsäuredimethyl- (ADS-Me), -ethylester (ADS-Et) oder den ADS 1-3 synthetisiert, die ihrerseits ausgehend von ADS-Me und den entsprechenden Alkoholen durch Umesterung hervorgehen. Die ADS wurden durch eine Mannich-Kondensation mit zwei Äquivalenten eines aromatischen Aldehyds und einem Äquivalent eines primären Amins in MeOH zu den entsprechenden 4-Piperidon-3,5-dicarbonsäureestern (PDS: 4-20) umgesetzt, die wiederum ebenfalls durch eine Mannich-Kondensation mit zwei Äquivalenten Formaldehyd und einem Äquivalent eines primären Amins in THF oder Aceton zu den entsprechenden 9-Oxo-BNDS reagieren. Dieser Syntheseschritt wurde hinsichtlich Ausbeute, Vereinfachung und Beschleunigung der Aufarbeitung optimiert. Die Stereochemie der so erhaltenen 9-Oxo-BNDS, die in Abhängigkeit vom Substitutionsmuster als cis- oder trans-Isomere entstehen, konnte mittels NMR-Spektroskopie aufgeklärt werden. Der 1,5-Dibenzylester 25 konnte durch katalytische Hydrierung mit Pd/C als Katalysator in EtOAc zur freien 1,5-Dicarbonsäure 26 umgesetzt werden. Die Triole 56-62 wurden ausgehend von den 9-Oxo-BNDS HZ2, 3FLB, 21-24, 28, 33 in einer Eintopfsynthese mittels NaBH4 in THF/MeOH durch Reduktion hergestellt. Die N3- und/oder N7-benzyl-substituierten Triole 57-59 wurden mittels katalytischer Hydrierung mit Pd/C als Katalysator in MeOH zu den entsprechenden NH-substituierten Triolen 63-65 umgesetzt. Mit Hilfe von selektiven 1D-NOESY-Messungen konnte die Stereochemie der Triole bezüglich der Stellung der Hydroxygruppe an C9 zugeordnet werden. Die 9-OH-BNDS 66-69 wurden durch Reduktion der entsprechenden 9-Oxo-BNDS HZ2, 3FLB, 32, 33 mit Na(CN)BH3 in MeOH synthetisiert. Die Reduktion verläuft nicht stereoselektiv, sodass die dabei entstehenden 9-OH-BNDS als Diastereomerengemische durch syn/anti-Isomerie der C9-OH-Gruppe anfallen. Das Diastereomerengemisch 66 konnte durch präparative Säulenchromatographie in die beiden reinen Isomere 66a (anti) und 66b (syn) getrennt werden. Das Gemisch 67 konnte durch Entwicklung einer HPLC-Methode und anschließender Übertragung auf ein Flashchromatographiesystem präparativ in die diastereomerenreinen Isomere 67a (anti) und 67b (syn) getrennt werden. Die stereochemische Zuordnung der Konfiguration an C9 wurde durch selektive 1D-NOESY-Messungen erreicht. Die Synthese der 9-OAc-BNDS 70-76 erfolgte durch Umsetzen des entsprechenden 9-OH-BNDS 66a, 67a, 67-69 mit einer äquimolaren Menge eines entsprechenden Carbonsäurechlorids und DBU als Hilfsbase in CHCl3. Im Fall der Synthese von Verbindung 76 musste das eingesetzte Decanoylchlorid mit Zinkstaub aktiviert werden. Die Zuordnung der Stereochemie der so erhaltenen Verbindungen basiert auf selektiven 1D-NOESY-Messungen. Die Verbindungen 25-27, 31, 56, 60, 63-66, 66a/b, 67, 67a/b, 70a, 71, 71a wurden auf pharmakologische Affinität zum kappa-Opioidrezeptor (OR) untersucht. Dadurch konnten die Verbindungen 71, 71a und 67a/b als hochaffine Liganden des kappa-OR identifizert werden. Durch die qualitative Analyse der Struktur-Wirkungs-Beziehungen, die auf dem Vergleich der pharmakologischen Daten dieser Arbeit und vorangegangener Arbeiten basiert, konnten folgende Anforderungen an selektive Liganden des kappa-OR mit 3,7-Diazabicyclo[3.3.1]nonan-Grundgerüst ermittelt werden: 1. Das Grundgerüst sollte an Position 2/4 mit 2-Pyridylresten substituiert sein. 2. An Position N3 und N7 dürfen keine Substituenten angebracht sein, die größer als ein Methylrest sind. 3. Das Molekül sollte an Position 1/5 mit Methylestergruppen versehen sein. 4. Der 3,7-Diazabicyclus kann an Position 9 eine -OH, -OAc oder möglicher-weise auch entsprechende, sterisch anspruchsvollere Funktionen besitzen. 5. Die Stellung des Substituenten an Position 9 sollte vorzugsweise anti-konfiguriert sein, bezogen auf den höher substituierten Piperidinring. N2 - The aim of the present work was the synthesis of several bicyclic compound classes as described in the following synthetic pathway. Various 2,4-di-(2-pyridyl)- or 2,4-di-(3-fluorphenyl)-substituted 9-oxo-3,7-diazabicyclo[3.3.1]-nonan-1,5-dicarboxylates (9-Oxo-BNDS: 21-25, 27-55) have been synthesized, which 1. were partially used as templates for the synthesis of 1,5-di-(hydroxymethyl)-3,7-diazabicyclo[3.3.1]nonan-9-oles (trioles: 56-65), 2. were partially used as starting compounds for the synthesis of dimethyl-9-hydroxy-3,7-diazabicyclo[3.3.1]nonan-1,5-dicarboxylates (9-OH-BNDS: 66-69), which in turn were used for the preparation of dimethyl-9-O-acyl-3,7-diazabicyclo[3.3.1]nonan-1,5-dicarboxylates (9-OAc-BNDS: 70-76), 3. served as starting compound for the synthesis of the 9-oxo-3,7-diazabicyclo-[3.3.1]nonan-1,5-dicarboxylic acid 26. The 9-Oxo-BNDS were prepared starting from the commercially available di-methyl- (ADS-Me) or diethylacetone-1,3-dicarboxylate (ADS-Et) or the ADS 1-3, which themselves were synthesized by transesterification of ADS-ME with the corresponding alcohols. The ADS were converted to the respective 4-piperidon-3,5-dicarboxylates (PDS: 4-20) by means of a Mannich-condensation with two equivalents of an aromatic aldehyde and one equivalent of a primary amine in MeOH as a solvent. The PDS were subjected to a second Mannich-condensation with two equivalents of formaldehyde and one equivalent of a primary amine in THF or acetone to form the corresponding 9-Oxo-BNDS. This step was optimized with respect to the yields, simplification and acceleration of the refurbishment. The stereochemistry of the so achieved 9-Oxo-BNDS, which can emerge as cis- or trans-isomers dependent on their substitution pattern, was elucidated by means of NMR-spectroscopy. The dibenzylcarboxylate 25 could be converted to the free dicarboxylic acid 26 by means of catalytic hydrogenation with Pd/C as catalyst in EtOAc as solvent. The trioles 56-62 were synthesized starting from the the 9-Oxo-BNDS HZ2, 3FLB, 21-24, 28, 33 in a one-pot-reduction-step by means of NaBH4 in THF/MeOH. The N3- and/or N7-benzyl-substituted trioles 57-59 were converted to the respective NH-substituted trioles 63-65 by catalytic hydrogenation with Pd/C in MeOH. The assignment of the hydroxy-group at C9 was achieved via selective 1D-NOESY measurements. The 9-OH-BNDS 66-69 were perpared by reduction of of the appropriate 9-Oxo-BNDS HZ2, 3FLB, 32, 33 with Na(CN)BH3 in MeOH. The reduction does not proceed in a stereoselective manner, which in consequence leads to the isolation of syn/anti-isomers with respect to the hydroxygroup at C9. The isomeric mixture 66 could be resolved into both pure isomers 66a (anti) and 66b (syn) by means of preparative column chromatography. The isomeric mixture 67 was separated in order to obtain the pure isomers 67a (anti) and 67b (syn) by preparative flash-chromatography. The stereochemical assignment of the hydroxygroup at C9 was accomplished by selective 1D-NOESY measurements. The synthesis of the 9-OAc-BNDS 70-76 was carried out by reaction of the respective 9-OH-BNDS 66a, 67a, 67-69 with an equimolar amount of the congruent acylchloride and DBU as an auxilary base in CHCl3. In the case of compound 76 the deployed decanoylchloride had to be activated with zinc dust. The stereochemical assignment of the so obtained compounds is based on selective 1D-NOESY measurements. The compounds 25-27, 31, 56, 60, 63-66, 66a/b, 67, 67a/b, 70a, 71, 71a were investigated with respect to their pharmacological affinity to the kappa-opioid receptor (OR). Compounds 71, 71a and 67a/b were identified to be highly affine ligands to the kappa-OR. By means of the analysis of structure-affinity-relationships, which are based upon the comparison of the pharmacological data of the present work and previous findings, the following prerequisites for high affinity towards the kappa-OR were derived for compounds bearing the 3,7-diazabicyclo[3.3.1]nonan-skeleton: 1. The skeleton at position 2/4 should be substituted by 2-pyridyl moieties. 2. No substituents being larger than a methyl-group should be attached to the nitrogens N3 and N7. 3. The molecule should carry a methyl carboxylate at positions 1/5. 4. The 3,7-diazabicycle may possess a -OH, -OAc or probably a respective, even sterically larger substituent at position 9. 5. The orientation of the substituent at position 9 should be preferably of anti-configuration according to the higher substituted piperidine ring. KW - Opioide KW - Rezeptor KW - Diazabicyclononanone KW - Chemische Synthese KW - Stereochemie KW - Synthese KW - Pharmakologie KW - Opioide KW - Kappa KW - Diazabicyclononan KW - Synthesis KW - Pharmacology KW - Opioids KW - Kappa KW - Diazabicyclononane Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14072 ER - TY - THES A1 - Muth, Mathias T1 - Synthese und Charakterisierung allosterer Modulatoren muscarinischer M2-Rezeptoren : Strukturvariationen der Bis(ammonium)alkan-Verbindung W84 T1 - Synthesis and characterisation of allosteric modulators of the muscarinic M2-receptor - structural variations of the bis(ammonio)alkane-compound W84 N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung allosterer Modulatoren muscarinischer Rezeptoren. Allostere Modulatoren binden an einer topographisch anderen Stelle am Rezeptor als klassische orthostere Liganden und sind so in der Lage, die Dissoziation und die Assoziation orthosterer Agonisten und Antagonisten zu beeinflussen. Die fünf Subtypen des Muscarinrezeptors M1-M5 unterscheiden sich vor allem in der Aminosäuresequenz der in den äußeren Bereichen des Rezeptorproteins vorhandenen Loops, während sie im Bereich des Rezeptorkanals, wo die orthostere Bindungsstelle lokalisiert ist, eine hohe Sequenzhomologie aufweisen. Die gemeinsame Bindungsstelle allosterer Modulatoren des M2-Rezeptors befindet sich im weniger konservierten extrazellulären Bereich. Somit sind allostere Modulatoren in der Lage, spezifisch an einen der Rezeptorsubtypen zu binden. Als Leitstruktur zum Entwurf der im Rahmen dieser Arbeit synthetisierten Verbindungen diente die Bis(ammonium)alkanverbindung W84. Über Weg A wurden Phthalsäure- bzw. Naphthalsäureanhydridderivate in einer Kondensationsreaktion mit dem entsprechenden N,N-Dimethylpropan-1,3-diaminderivat zum jeweiligen Phthalimidopropylaminderivat umgesetzt. Durch die Reaktion von zwei Äquivalenten des Amins mit einem Äquivalent 1,6-Dibromhexan wurden dann die symmetrischen W84-Derivate erhalten. Um die unsymmetrischen W84-Derivate zu erhalten, musste zunächst das jeweilige Phthalimidopropylamin einseitig durch 1,6-Dibromhexan alkyliert werden. Im letzten Schritt wurden äquimolare Mengen der alkylierten Verbindung und eines Phthalimidopropylamins umgesetzt. Da sich im Laufe der Arbeit die Methylierung an Position 2 der Propylketten als kritische Position zur Beeinflussung der Gleichgewichtsbindung herausstellte, wurden Verbindungen hergestellt, die an den Propylketten Alkylgruppen verschiedener Länge tragen. Aus diesem Grund wurde Syntheseweg B entwickelt. Zunächst wurden in mehreren Stufen, ausgehend von Malonsäurediethylester, einfach und zweifach mit Alkylgruppen substituierte 1,3-Dibrompropanderivate hergestellt. Diese wurden dann mit Kaliumphthalimid zu den jeweiligen 3-Brompropylphthalimidderivaten umgesetzt. Zwei Äquivalente dieser 3-Brompropylphthalimide reagierten mit einem Äquivalent N,N,N’,N’-Tetramethyl-1,6-hexandiamin zu den entsprechenden symmetrischen W84-Derivaten. Ein weiteres Ziel der Arbeit bestand darin, stark fluoreszierende W84-Derivate herzustellen. Die fluoreszierenden Eigenschaften N-substituierter Naphthalimide könnten zur direkten Charakterisierung allosterer Interaktionen oder zur Verfolgung des „Rezeptor-Traffickings“ mittels Fluoreszenzkorrelationsspektroskopie genutzt werden. Deshalb wurden in Position 3 und 4 des Naphthalimidringes des potentesten allosteren Modulators Aminogruppen eingeführt. Hexamethonio-Derivate beeinflussen in nennenswertem Maße bisher nur die Bindung von Antagonisten am M2-Rezeptor. Da die allostere und die orthostere Bindungsstelle räumlich nahe zusammenliegen, wurde der Versuch unternommen, einen orthosteren Agonisten und einen allosteren Modulator in einem Molekül miteinander zu verknüpfen. Es wurden zwölf Hybridmoleküle aus einem Teil des hochaffinen allosteren Modulators 3a und Derivaten des Muscarinagonisten Oxotremorin-M, verbunden durch aliphatische Spacer verschiedener Länge, hergestellt. In pharmakologischen Testungen soll aufgeklärt werden, ob es möglich ist, mit einem Agonist/Alloster-Hybridmolekül gleichzeitig die orthostere und die allostere Bindungsstelle zu besetzen. Die pharmakologische Testung der synthetisierten Verbindungen erfolgte durch Radioligandbindungsstudien. Der allostere Effekt der Testsubstanzen wurde indirekt über die Verzögerung der Dissoziation des radioaktiv markierten orthosteren Antagonisten [3H]N-Methylscopolamin bestimmt. Alle bisquartären Testverbindungen weisen deutlich höhere Affinitätswerte als die Leitstruktur W84 auf. Die 1,8-Naphthalimid-substituierten Verbindungen mit gleichzeitiger zweifacher Methylierung erwiesen sich als hochaffin und zugleich positiv kooperativ. Die wirksamste Verbindung dieser Serie ist Verbindung 3a (Naphmethonium), deren Affinität zum NMS-besetzten Rezeptor im einstelligen nanomolaren Bereich liegt (pEC50 = 8.36). Somit stellt Naphmethonium den potentesten in der Literatur bekannten allosteren Modulator des M2 Rezeptors dar. Mittels QSAR-Analysen wurden die ermittelten Affinitäten zum freien und zum NMS-besetzten Rezeptor in Zusammenhang mit verschiedenen physikochemischen Parametern gebracht. Die Affinität zum NMS-besetzten Rezeptor der Verbindungen der Serie 2 lässt sich mit hoher Güte durch das Volumen eines lateralen N-Methylimids in Kombination mit der benachbarten Dimethylierung der Propylkette beschreiben. Somit wird deutlich, dass zur Erzielung von positiver Kooperativität die Kombination aus einem hochaffinen aromatischen Imid in direkter Nachbarschaft zu einer 2,2-Alkylpropylkette essentiell ist. N2 - The present work deals with the synthesis and characterization of allosteric modulators of muscarinic receptors. Allosteric modulators bind to a topographically different site than classical orthosteric ligands and, thus, are capable of influencing both the dissociation and the association of orthosteric agonists and antagonists. Allosteric modulators are capable of binding selectively to specific subtypes. The bis(ammonio)alkane-type compound W84 served as a lead for the compounds synthesized in this work. Via pathway A, phthalic- and naphthalic anhydride derivatives were converted with N,N-dimethylpropane-1,3-diamines to the phthalimidopropylamine derivatives. The symmetrical W84-derivatives were obtained by the conversion of two equivalents of the amine with one equivalent 1,6 dibromohexane. To obtain the non-symmetrical W84-derivatives the phthalimidopropylamines were unilaterally alkylated by 1,6-dibromohexane. In the last step equimolar amounts of the monoalkylated compound and a phthalimidopropylamine were connected. During our studies the methylation of position 2 of the propylene chains was identified as critical position for the influence on equilibrium binding. Therefore, compounds with varying alkyl substituents were synthesized. First, starting from malonic diethyl ester, 1,3-dibromo-propane derivatives carrying one or two ethyl-, propyl- or iso-butyl groups, respectively, were synthesized first. The latter were converted to the corresponding 3-bromopropylphthalimid derivatives with potassium phthalimide. In the last step two equivalents of the bromopropyl-phthalimides reacted with one equivalent tetramethyl-1,6-hexane-diamine to the symmetrical hexamethonio-derivatives. A further aim of the work was to synthesize highly fluorescent W84-derivatives. The fluorescent properties of N-substituted naphthalimides could be utilized for the direct characterization of allosteric interactions. Therefore, amino groups were introduced in positions 3 and 4 of the naphthalimide moiety. Until now, only the binding of antagonists of the M2 receptor was influenced by hexamethonio derivatives. Because of the spatial proximity of the orthosteric to the allosteric binding site it was tried to combine an agonist and an allosteric modulator in one molecule. Twelve hybride molecules consisting of a part of a highly affin allosteric modulator and of derivatives of the muscarinic agonist oxotremorine-M were synthesized. In the pharmacological evaluation it will be elucidated if it is possible for an agonist/alloster-hybride molecule to bind simultaneously to the orthosteric and the allosteric site. The pharmacological testing of the compounds was accomplished by radioligand binding studies . The allosteric effect of the compounds was determined by measurement of the inhibition of the dissociation of the radioactive marked orthosteric antagonist [3H]N-methylscopolamine. All compounds revealed higher affinitiy values than the lead structure W84. The most potent compound of that series is compound 3a (naphmethonium) that reveals an affinity to the NMS-occupied receptor in the low nanomolar range (pEC50 = 8.36). Taking all results together, the highest affinity values in combination with positive cooperativity were obtained for W84-derivatives carrying at least one naphthalimide moiety directly connected to a 2,2-dimethylpropyl chain. By the introduction of different alkyl groups in the propylene chains it was possible to verify the critical position with respect to the cooperative behaviour of W84-derivatives. QSAR-studies were performed in order to check whether the pharmacologically determined affinities to the free and to the NMS-occupied receptor can be explained by physicochemical properties of the compounds. The affinity to the NMS-occupied receptor of the compounds of series 2 can be described using the volume of one lateral N-methylimide in combination with the dimethylation of the neighbored propylene chain. Summarizing these results it can be concluded that the compounds feature a dominant side with regard to allosteric potency. To achieve positive cooperativity the combination of an affinity generating lateral aromatic imide moiety connected to a 2,2-alkylated propylene chain is essential. KW - Muscarinrezeptor KW - allosterischer Effektor KW - W84 KW - Analoga KW - Chemische Synthese KW - GPCR KW - allostere Modulation KW - Muscarinrezeptor KW - GPCR KW - allosteric modulation KW - muscarinic receptor Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8839 ER - TY - THES A1 - Laskowski, Nadine T1 - Synthese und Charakterisierung neuartiger siliciumhaltiger Synthesebausteine T1 - Synthesis and characterization of novel silicon building blocks N2 - Die vorliegende Arbeit beschreibt die Synthese von linearen und verzweigten funktionalisierten siliciumhaltigen Synthesebausteinen unter Verwendung der 2,4,6-Trimethoxyphenyl-Schutzgruppe sowie die Synthese cyclischer siliciumhaltiger Synthese-bausteine unter Verwendung eines Donor-stabilisierten Silylens. Diese Forschungsarbeit leistet daher sowohl einen Beitrag zur Schutzgruppenchemie des Siliciums als auch zur Chemie des nieder- bzw. höhervalenten Siliciums. Alle Zielverbindungen sowie die entsprechenden isolierten Vorstufen wurden durch NMR-Spektroskopie in Lösung (1H-, 13C- und 29Si-NMR) und Elementaranalysen (C, H, N; außer 15 und 16) charakterisiert. Die Verbindungen 34, 36, 41, 42, 45, 48, 52, 54 und 55 wurden zusätzlich durch NMR-Spektroskopie im Festkörper (13C-, 15N- und 29Si-VACP/MAS-NMR) untersucht, und die Verbindungen 1–6, 9, 18, 25, 29, 34, 36, 41, 42, 45, 48, 52, 54 und 55 wurden außerdem durch Einkristall-Röntgenstrukturanalyse charakterisiert. N2 - This thesis describes the synthesis of linear and branched Si-functionalized building blocks by using the 2,4,6-trimethoxyphenyl protecting group as well as the synthesis of cyclic silicon-containing building blocks by using a donor-stabilized silylene. Thus, this research project contributes to both the chemistry of silicon protecting groups and the chemistry of high/low-valent silicon. The identities of all target compounds and their isolated precursors were established by NMR spectroscopic studies in solution (1H, 13C, and 29Si NMR) and elemental analyses (C, H, N; except 15 and 16). In addition, compounds 34, 36, 41, 42, 45, 48, 52, 54, and 55 were studied by NMR spectroscopy in the solid state (13C, 15N, and 29Si VACP/MAS NMR), and compounds 1–6, 9, 18, 25, 29, 34, 36, 41, 42, 45, 48, 52, 54, and 55 were additionally characterized by single-crystal X-ray diffraction. KW - Silicium KW - Chemische Synthese KW - siliciumhaltige Synthesebausteine Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107481 ER - TY - THES A1 - Kirchwehm, Yvonne T1 - Untersuchungen zur Synthese aromatisch anellierter Triquinacene T1 - Investigations on the synthesis of aromatically annulated triquinacenes N2 - In dieser Arbeit wurde ein geeigneter Zugang zu TBTQ-Derivaten erarbeitet, der eine paarweise Funktionalisierung der aromatischen Positionen in direkter Nachbarschaft zum Triquinacen-Kern zulässt. Hierfür wurde sowohl die doppelte Cyclodehydratisierungsroute als auch die dreifache Cyclisierungsvariante zur Darstellung von Tribenzotriquinacenen dahingehend modifiziert, dass die Einführung der „ortho“-Substituenten bereits zu Beginn der Synthese mit den Edukten erfolgte, da eine nachträgliche Funktionalisierung der gewünschten Positionen am TBTQ aufgrund sterischer Faktoren nicht möglich ist. Es wurden unter anderem die ersten literaturbekannten „ortho“-substituierten TBTQ-Derivate erhalten und vollständig charakterisiert. Zur Erweiterung des aromatischen Systems wurden außerdem Benzodiphenanthrenotriquinacen-Vorstufen synthetisiert, die im Falle der doppelten Cyclodehydratisierungsroute Acenapthylen-Derivate lieferten. Benzodiphenanthrenotriquinacen konnte mit Hilfe der dreifachen Cyclisierungsvariante synthetisiert werden. Die Zielmoleküle sollen als Vorstufen für überbrückte aromatisch anellierte Triquinacene dienen. N2 - In this work a suitable reaction pathway for TBTQ-derivatives with geminate functionalization of the aromatic positions adjacent to the triquinacene core was developed. Therefore, the double cyclodehydration as well as the triple cyclization strategy for the synthesis of tribenzotriquinacenes were modified, so that the introduction of the „ortho“-substituents takes place as part of generating the starting material at the beginning of the synthetic scheme. The reason for this is that subsequent functionalization at the „ortho“-positions is impeded due to steric hindrance. Among other things the first “ortho”-substituted TBTQ-derivatives known in literature were synthesized and fully characterized. Furthermore, precursors for benzodiphenanthrenotriquinacene were synthesized in order to extend the aromatic periphery. The double cyclodehydration strategy provided acenaphthylene derivatives. However, Benzodiphenanthrenotriquinacene could be generated via triple cyclization strategy. The target molecules might serve as precursors for the formation of bridged aromatically annulated triquinacenes. KW - Triquinacenderivate KW - Aromatisch anellierte Triquinacene KW - „ortho“-substituierte Tribenzotriquinacene KW - Benzodiphenanthrenotriquinacen KW - gekrümmte Kohlenwasserstoffe KW - Aromatically annulated triquinacenes KW - „ortho“-substituted tribenzotriquinacenes KW - benzodiphenanthrenotriquinacene KW - curved hydrocarbons KW - Chemische Synthese KW - Kohlenwasserstoffe Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85088 ER - TY - THES A1 - Hofmann, Marco T1 - Ferriomethyl- und Wolframiomethyl-substituierte Silane, Silanole und Siloxane T1 - Ferriomethyl- and Tungsteniomethyl-substituted silanes, silanols and siloxanes N2 - Das Interesse an Übergangsmetall-substituierten Siloxanen ist in den vergangenen Jahren stark angewachsen. Dies ist vor allem darauf zurückzuführen, dass diesen Systemen eine wichtige Modellfunktion für auf Silica-Oberflächen verankerte, katalytisch aktive Übergangsmetallkomplexe zukommt, die eine Vielzahl organischer Reaktionen katalysieren und dabei sowohl die Vorteile der Homogenkatalyse als auch der Heterogenkatalyse in einem einzigen System vereinen. Weiterhin kommt ihnen auch eine wichtige Bedeutung als Vorstufen zur Darstellung von Silicon-Polymeren und Keramiken zu, die definierte Metallzentren in ihrem Polymer-Grundgerüst enthalten und somit als neue Werkstoffe mit hoher mechanischer und thermischer Stabilität sowie ausgezeichneten leitenden Eigenschaften dienen können. Metallosiloxane mit einer direkten Metall-Silicium-Bindung können über die entsprechenden Metallo-silanole generiert werden, die seit Beginn der 90er Jahre eine intensivere Bearbeitung erfahren. In dieser Arbeit wurden die ersten Vertreter von Metallo-silanolen dargestellt und bezüglich ihrer Reaktivität untersucht, in denen das Metall- und Siliciumatom durch einen Alkylidenspacer getrennt ist. Es wurde zunächst eine Reihe von C5R5(OC)2FeCH2-substituierten Silanolen über die Et3N-assistierte Hydrolyse von Ferriomethyl-chlorsilanen bzw. Oxygenierung von Si-H-funktionellen Ferriomethyl-silanen mit Dimethyldioxiran dargestellt. Die Stabilisierung durch das Metallfragment in β-Stellung zur Silanoleinheit erweist sich ebenfalls hinreichend für die Darstellung von Ferriomethyl-silandiolen und –silantriolen, wie anhand der Darstellung von Cp(OC)2Fe-CH2-Si(R)(OH)2 (R = Me, OH) nachgewiesen werden konnte. Allerdings zeigen diese Vertreter im Vergleich zu ihren Analoga mit direkter Fe-Si-Bindung eine z.T. deutlich erhöhte Eigenkondensationsneigung. Die Röntgenstrukturanalysen der Ferriomethyl-diorganosilanole C5R5(OC)2Fe-CH2-Si(Me)(R’)OH belegen deren Aggregation zu Tetrameren bzw. unendlichen Ketten im Festkörper über starke intermolekulare OH...O-Wasserstoffbrückenbindungen. Durch Et3N-assistierte Kondensation mit Organochlorsilanen, wie z.B. Me2Si(H)Cl lassen sich kontrolliert Ferriomethyl-substiuierte Di-, Tri- und Tetrasiloxane generieren. Auch der Aufbau von mehrkernigen Heterosiloxangerüsten ist möglich, wie exemplarisch anhand der Synthese von Cp(OC)2Fe-CH2-SiMe2O-M(Cl)Cp2 (M = Ti, Zr) überprüft wurde. Weiterhin können auch Modifikationen am Metallfragment vorgenommen werden, wie der photochemisch induzierte CO/PR3-Austausch an Cp(OC)2-CH2-SiMe2OH beweist. Die synthetisierten Ferriomethyl-siloxane mit δ-ständiger Si-H-Funktion eignen sich für weitere Umsetzungen, wie z.B. der oxidativen Addition der Si-H-Funktion an ungesättigte Metallfragmente. So lassen sich das Tri- bzw. Tetrasiloxan Cp(OC)2Fe-CH2-Si(R)(OSiMe2H)2 (R = Me, OSiMe2H) durch UV-Bestrahlung unter CO-Eliminierung glatt in die Cyclo(ferra)siloxane Cp(OC)(H)Fe-SiMe2-OSi(Me)(R)-OSiMe2 überführen. Abschließend wurde überprüft, ob sich die Chemie der Ferriomethyl-silanole auch auf andere Übergangsmetallfragmente übertragen lässt. Hierbei konnten Wolframiomethyl-silanole mit dem Cp(OC)2(Me3P)WCH2-Fragment dargestellt werden, wobei sich, im Gegensatz zu den Eisenvertretern, die Darstellungsmethode der Oxygenierung von Si-H-funktionellen Vorläufern als vorteilhafter erweist. N2 - The interest in transition metal substituted siloxanes has rapidly grown in recent years. This is mainly due to their ability to serve as model systems for catalytically active transition metal complexes immobilized on a silica surface combining the advantages of homogeneous as well as those of heterogeneous catalysis in one system. In addition, these systems are also considered as precursors in the production of silicon polymers and ceramics with well-defined metal centres in the polymer backbone and can so be applied as new materials with good mechanical and thermal stability and excellent conducting properties. Metallo-siloxanes with a direct metal-silicon bond can be generated via the corresponding metallo-silanols which raised a greater attention in the last ten years. In this work the first examples of metallo-silanols have been synthesized and studied in which the metal and silicon atom are separated by an alkylidene spacer group. A number of C5R5(OC)2FeCH2-substituted silanols has been generated via Et3N-assisted hydrolysis of ferriomethyl-chlorosilanes and oxygenation of Si-H-functional ferriomethyl-silanes with dimethyldioxirane, respectively. The stabilizing effect of the metal fragment in β-position to the silanol unit is sufficient for the isolation of ferriomethyl-silanediols und –silanetriols as could be demonstrated in the synthesis of Cp(OC)2Fe-CH2-Si(R)(OH)2 (R = Me, OH). However, these compounds show an enhanced tendency to self-condensation compared to their analogues with a direct metal-silicon bond. The X-ray structure analyses of the ferriomethyl-diorganosilanols C5R5(OC)2Fe-CH2-Si(Me)(R’)OH show their aggregation to tetramers or infinite chains in the solid state, respectively, via strong intermolecular OH...O hydrogen bonds. Ferriomethyl-substiuted di-, tri- and tetrasiloxanes can be generated by controlled Et3N-assisted condensation with organochlorosilanes, e.g. Me2Si(H)Cl. Even binuclear heterosiloxanes can be synthesized as was proved by the synthesis of Cp(OC)2Fe-CH2-SiMe2O-M(Cl)Cp2 (M = Ti, Zr). In addition, there are also modifications at the metal fragment possible like the photochemically induced CO/PR3 substitution at Cp(OC)2-CH2-SiMe2OH. Ferriomethyl-siloxanes with a Si-H function in δ-position are suitable for further modifications, e.g. oxidative addition of the Si-H function to electronically unsaturated metal fragments. UV irradiation of the tri- and tetrasiloxanes Cp(OC)2Fe-CH2-Si(R)(OSiMe2H)2 (R = Me, OSiMe2H) leads to CO elimination producing the cyclo(ferra)siloxanes Cp(OC)(H)Fe-[SiMe2-OSi(Me)(R)-OSiMe2]. Finally it was examined if the chemistry of ferriomethyl-silanols can be transferred to compounds with other transition metal fragments. Tungsteniomethyl-silanols with a Cp(OC)2(Me3P)WCH2 fragment can be generated, whereas in contrast to the synthesis of ferriomethyl-silanols, the oxygenation method via Si-H functional precursors is more favourable. KW - Übergangsmetallkomplexe KW - Siliciumorganische Verbindungen KW - Chemische Synthese KW - Metallo-silanole KW - Metallo-siloxane KW - Hydrolyse KW - Oxygenierung KW - Kondensation KW - metallo-silanols KW - metallo-siloxanes KW - hydrolysis KW - oxygenation KW - condensation Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1181579 ER - TY - THES A1 - Herberth, Edith T1 - Hydro- und Carboborierungs-/Oxidationsreaktionen von Tricyclo[4.1.0.02,7]heptan-Derivaten sowie Synthese und Solvolyse-Reaktionen von exo,exo-Bicyclo[1.1.0]butan-2,4-dimethanoldimethansulfonat T1 - Hydro- and Carboboration/Oxidation Reactions of Tricyclo[4.1.0.02,7]heptane Derivatives as well as Synthesis and Solvolyses Reactions of exo,exo-Bicyclo[1.1.0]butane-2,4-dimethanol Dimethanesulfonate N2 - Die bekannte Umwandlung des Bromtricycloheptans 4 in den Homoallylalkohol 76 durch Hydroborierung/Oxidation wurde anders als früher mit einer in situ aus Natriumborhydrid und elementarem Iod erzeugten Boran-THF-Lösung bewirkt. Darüber hinaus konnten unter den gleichen Bedingungen das Chlortricycloheptan 26 und das Methyltricycloheptan 62 in den Homoallylalkohol 108 bzw. 109 überführt werden. Über 4, 26, 62 und das Phenyltricycloheptan 15 hinaus, dessen Hydroborierung/ Oxidation zum Homoallylalkohol 45a schon früher gelungen war, wurde eine Reihe von Bicyclo[1.1.0]butan-Derivaten mit Boran behandelt und das Gemisch dann oxidiert. Allerdings ergab sich in keinem Fall ein zu den Homoallylalkoholen 45a, 76, 108 und 109 analoges Produkt. Über die Ursachen dieser Misserfolge kann gegenwärtig nur spekuliert werden. Immerhin fand sich bei 3,4-Benzotricyclo[4.1.0.02,7]heptan (83) ein Hinweis auf eine Oligomerenbildung des Substrats. Als Grund für die Anlagerung von Boran an 4, 15, 26 und 62 wird die Fähigkeit der Substituenten am Tricycloheptan-System, eine positive Ladung zu stabilisieren, gesehen. Durch die Umsetzung von Trideuteroboran mit 4 wurden bestimmte Reaktions-mechanismen ausgeschlossen, etwa der via das Umlagerungsprodukt 119 von 4 und Hydroborierung von 119, und der mit dem Zwitterion 120 gestützt, das durch 1,2-Deuteridverschiebung in das Cyclohexenylmethylboran 121 umlagern sollte, das als die Vorstufe des nach der Oxidation isolierten Produkts 87 angesprochen wird. Die Reaktionen von 4 und 15 mit 9-Borabicyclo[3.3.1]nonan (9-BBN), gefolgt von der Oxidation des Gemisches, lieferten je nach der Geschwindigkeit der Zugabe von 9-BBN entweder die Dialkohole 122 bzw. 123, jeweils als Diastereomerengemische, oder/und die Homoallylalkohole 76 bzw. 45a. Als Vorstufen der Verbindungen 122 und 123 werden Zwitterionen des Typs 124, Trialkylborane 125, Zwitterionen 127 und Trialkylborane 128 und 129 gesehen. Die Zwitterionen 124 sollten durch Addition von 9-BBN an die Substrate 4 und 15 entstehen und durch Hydridwanderung in 125 übergehen, deren Anlagerung von 4/15 die Zwitterionen 126 und dann 127 hervorbringen sollte. Die 1,2-Wanderung eines Achtring-Kohlenstoffatoms müsste zu 128 und 129 führen, die durch Oxidation in 122/123 umgewandelt werden dürften. Das Dimesylat exo,exo-142 wurde in einer mehrstufigen Synthese über den bekannten Dibromdialkohol 148 ausgehend von Benzvalen (82) synthetisiert. Die Alkoholfunktionen von 148 wurden mit Trimethylsilylchlorid geschützt unter Bildung des Bis(silylethers) 151. Aus 151 wurde durch Umsetzung mit tert-Butyllithium das Bicyclobutan exo,exo-152 dargestellt. Nach Abspaltung der Schutzgruppen mit Kaliumcarbonat in Methanol wurde der Dialkohol exo,exo-150 erhalten, welcher mit Methansulfonsäurechlorid zum Zielmolekül exo,exo-142 reagierte. Die Reaktion einer 2:1-Mischung aus exo,exo-150 und 157 mit Natriumhydrid und Iodethan lieferte die Bis(ethylether) 160 und 161 in 38% bzw. 19% Ausbeute. In den Solvolyse-Reaktionen wurde ein 36:1:16-Gemisch aus exo,exo-142, endo,-endo-142 und 159 eingesetzt. Bei der Reaktion des Gemischs in 60% wässrigem Aceton in Gegenwart von Triethylamin bei 40 °C über fünf Tage zeigten die NMR-Spektren die Abnahme von exo,exo-142 um 75% (bezogen auf 159 als internen Standard), es konnte aber kein Produkt identifiziert werden. Die Ethanolyse bei 40 °C in Gegenwart von Triethylamin lieferte nach drei Tagen ein 3.5:2.8:1.0-Gemisch aus exo,exo-142, 159 und 162. Die Verbindung 162 wurde mit 70% Ausbeute (bezogen auf umgesetztes exo,exo-142) gebildet. Die NMR-Spektren zeigten einen Umsatz von exo,exo-142 von 30% (bezogen auf 159 als internen Standard). Wurde die Reaktion unter den gleichen Bedingungen sieben Tage durchgeführt, verringerte sich der Anteil an exo,exo-142 um 50% und man erhielt eine 1:1:1-Mischung aus exo,exo-142, 159 und 162. Die Ausbeute von 162 lag bei 50% (bezogen auf umgesetztes exo,exo-142). Bei der Solvolyse in 2,2,2-Trifluorethanol über drei Tage bei 40 °C in Gegenwart von Triethylamin erhielt man ein 3.2:2.0:1.0-Gemisch aus exo,exo-142, 159 und 163. Anhand der NMR-Spektren wurde ein Umsatz von exo,exo-142 von 20% beobachtet (bezogen auf 159 als internen Standard). Die Solvolyse-Reaktionen des Dimesylats exo,exo-142 verlaufen, anders als die seines Diastereomers endo,endo-142, unter ausschließlicher Bildung von Produkten mit nicht umgelagertem Gerüst und liefern damit erstmals einen deutlichen Hinweis für die Existenz eines Bicyclo[1.1.0]but-2-exo-ylcarbinyl-Kations (166) als Intermediat. Es ist zu erwarten, dass 162 und 163 ihrerseits solvolysieren unter Bildung des Bis(ethylethers) 160 bzw. dessen Hexafluor-Derivates, aber diese Verbindungen sind unter den Solvolysebedingungen nicht stabil. Dies konnte in einem Kontrollexperiment bestätigt werden. N2 - The known transformation of bromotricycloheptane 4 into the homoallylalcohol 76 by hydroboration/oxidation was performed different to the earlier procedure by using in the first step a THF solution of borane generated in situ from sodiumborohydride and elemental iodine. Furthermore chlorotricycloheptane 26 and methyltricycloheptane 62 could be transformed into the homoallylalcohol 108 and 109, respectively, by using the same reaction conditions. Beside 4, 26, 62 and phenyltricycloheptane 15, which hydroboration/oxidation to homoallylalcohol 45a succeeded earlier, a variety of bicyclo[1.1.0]butane derivatives was treated with borane and then the mixture was oxidized. But no reaction resulted in a product analogous to the homoallylalcohols 45a, 76, 108 and 109. About the reason for the failure of these reactions at this time only can be speculated. However, in the case of 3,4-benzotricyclo[4.1.0.02,7]heptane (83) evidence was given for formation of oligomers from the substrate. The ability to stabilize a positive charge of the substituents at the tricycloheptane system is to be considered as a reason for the addition of borane to 4, 15, 26 and 62. Based on the transformation of 4 with trideuteroborane certain reaction mechanisms, for example that via the rearrangement product 119 of 4 and hydroboration of 119, were excluded and that with the zwitterion 120 was supported. 120 should rearrange through a 1,2-shift of deuteride into cyclohexenylmethylborane 121 which is seen as a precursor in the oxidation reaction to the isolated product 87. The reactions of 4 and 15 with 9-borabicyclo[3.3.1]nonane (9-BBN) followed by oxidation of the mixture generated depending on the addition rate of 9-BBN to the substrate the dialcohols 122 and 123, respectively, in both cases as a diastereomeric mixture and/or the homoallylalcohol 76 and 45a, respectively. Zwitterions 124, trialkylboranes 125, zwitterions 127 and trialkylboranes 128 and 129 are considered as precursors for the compounds 122 and 123. The zwitterions 124 should be formed by addition of 9-BBN to the substrates 4 and 15 and should be transformed by hydride shift into 125 which should give rise to zwitterions 126 and then 127 after addition of 4/15. 1,2-Shift of a carbon atom of the eight-membered ring should lead to 128 and 129 which should be transformed into 122/123 by oxidation. Dimesylate exo,exo-142 was obtained in a more step reaction via the known dibromodialcohol 148 starting from benzvalene (82). The alcohol groups of 148 were protected with trimethylsilyl chloride by formation of the bis(silyl ether) 151. Bicyclo-butane exo,exo-152 was obtained from 151 by reaction with tert-butyllithium. After removing the protecting groups with potassium carbonate in methanol the dialcohol exo,exo-150 was formed. This alcohol reacted with methanesulfonyl chloride to the target molecule exo,exo-142. The reaction of a 2:1 mixture of exo,exo-150 and 157 with sodium hydride and iodoethane generated the bis(silyl ethers) 160 and 161 in 38% and 19% yield, respectively. For the solvolyses reactions a 36:1:16 mixture of exo,exo-142, endo,endo-142 and 159 was used. After reacting the mixture in 60% acetone/water in the presence of triethylamine at 40 °C during five days the NMR spectra showed a decrease of exo,exo-142 by 75% (determined by using 159 as internal standard) while no product could be identified. The ethanolysis at 40 °C during three days in the presence of triethylamine produced a 3.5:2.8:1.0 mixture of exo,exo-142, 159 and 162. The compound 162 was formed with 70% yield (based on exo,exo-142 consumed). The NMR spectra showed that the proportion of exo,exo-142 had decreased by 30% (determined by using 159 as internal standard). After seven days using the same reaction conditions the proportion of exo,exo-142 decreased by 50% (determined by using 159 as internal standard) and a 1:1:1 mixture of exo,exo-142, 159 and 162 was obtained. 162 was formed with 50% yield (based on exo,exo-142 consumed). Solvolysis in 2,2,2-trifluoroethanol at 40 °C during three days in the presence of triethylamine produced a 3.2:2.0:1.0 mixture of exo,exo-142, 159 und 163. In the NMR spectra a decrease of exo,exo-142 by 20% was observed (determined by using 159 as internal standard). The solvolyses reactions of the dimesylate exo,exo-142 proceed, in contrast to those of its diastereomer endo,endo-142, solely with formation of unrearranged products and therefore they offer for the first time strong evidence for the intermediacy of a bicyclo[1.1.0]-but-2-exo-ylcarbinyl cation (166). It should be expected that the compounds 162 and 163 solvolyses on their part to give the bis(ethyl ether) 160 and its hexafluoro-derivative, respectively, but these compounds are not stable under the solvolyses conditions. This was proved by a control experiment. KW - Tricycloheptanderivate KW - Hydroborierung KW - Oxidation KW - Bicyclobutanderivate KW - Chemische Synthese KW - Bicyclobutanderivate KW - Solvolyse KW - Bicyclobutane KW - Hydroborierung KW - Solvolysen KW - Bicyclobutanes KW - Hydroboration KW - Solvolyses Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4952 ER - TY - THES A1 - Güthlein, Markus T1 - Ex-Chiral-Pool-Synthese von 5-Aminopiperidylessigsäuren über eine Tandem-Wittig-1,3-dipolare Cycloaddition T1 - ex-chiral-pool synthesis of 5-aminopiperidylaceticacid via tandem-Wittig-1,3-dipolar cycloaddition reaction N2 - Ziel dieser Arbeit war es die Tandem-Wittig-1,3-dipolare Cycloaddition auf a-Hydroxyurethanderivate zu übertragen und so chirale, nichtracemische b-Amino-piperidylacetatderivaten in möglichst hoher Diastereomerenreinheit darzustellen. Diese Aminopiperidinderivate sollten mit 5-Chloro-2-methoxy-4-methylamino-benzoesäure gekoppelt werden, um die pharmakologische Wirksamkeit zu testen. Als Ausgangssubstanz wurde L-Pyroglutaminsäure (59) verwendet. Über eine dreistufige literaturbekannte Synthese wurden die beiden Halogenpyrrolidinon-derivate 62 und 63 hergestellt. Diese wurden über SN2-Reaktionen mit Natriumazid zu dem Azidopyrrolidinon 64 umgesetzt und durch die Einführung einer Boc-Schutzgruppe in die Verbindung 65 überführt. Die Hydroxyurethanderivate 66 erhält man auf zwei unterschiedlichen Wegen. Zum einen auf dem direkten Weg über eine DiBAl-H-Reduktion von 65 und zum anderen über eine Ringöffnung von 65 mit Natriummethanolat zu 68 und anschließender DiBAl-H-Reduktion. Mit 66 wurden das erste Mal a-Hydroxyurethanderivate einer Tandem Wittig 1,3-dipolaren Cycloaddition unterworfen. Man erhielt unter Essigsäurekatalyse ein Produktgemisch aus dem a,b-ungesättigten Ester 74, dem Triazolin 75 und dem Diazoester 76. Der isolierte a,b-ungesättigte Ester 74 konnte teilweise unter Essigsäaurekatalyse erneut zu den Cycloadditionsprodukten umgesetzt werden. Die Gleichgewichtseinstellung zwischen dem Triazolin 75 und dem Diazoester 76 konnte mit Triethylamin zugunsten des Diazoesters 76 verändert werden. Die Wittigreaktion verläuft unter thermodynamischer Kontrolle stereoselektiv zum E-konfigurierten a,b-ungesättigtem Ester 74. Auch die 1,3-dipolare Cycloaddition verläuft in einem äußerst hohem Maße diastereoselektiv. Durch 1H-NMR-spektroskopische Untersuchungen konnte man die Konfiguration der Cycloadditionsprodukte mit trans bestimmen. Eine Erklärung für die Stereoselektivität der 1,3-dipolaren Cycloaddition liefert die Betrachtung der sterischen und elektronischen Eigenschaften zweier hypothetischer sesselförmiger Konformere des a,b-ungesättigten Esters 74. Über eine katalytische Hydrierung des Diazoesters 76 konnte man einen sehr guten Zugang zu den trans-konfigurierten Piperidylacetaten 2R-78 etablieren. Das andere Diastereomer 2S-78 sollte nach Stickstoffextrusion aus 76 durch diastereoselektive Hydrierung des vinylogen Urethans 80 erhalten werden. Überraschenderweise entstand auch hier 2R-78 als Hauptprodukt. 2S-78 konnte nur als Nebenprodukt isoliert werden. Über eine reduktive Aminierung konnte man eine Methylgruppe am Ringstickstoff von 2R-78 bzw. 2S-78 einführen und erhielt 2R-81 bzw. 2S-81. Mit Moc2O konnte man die beiden Diastereomere 2R-78 und 2S-78 in die geschützten Piperidinderivate 2R-82 und 2S-82 überführen. Die Moc-geschützte Verbindung 2R-82 erhielt man außerdem über eine Synthese des Moc-geschützten Diazoesters 83 und anschließender katalytischen Hydrierung. Nach Abspalten der Boc-Schutzgruppe durch eine Umsetzung der Piperidine 2R-81 bzw. 2S-81 mit methanolischer Salzsäure konnte man die Dihydrochloride 2R-87 bzw. 2S-87 isolieren. Die freien Amine 2R-88 bzw. 2S-88 erhielt man nach Ausschütteln mit gesättigter Natriumcarbonatlösung. Die Piperidylacetate 2R-88 und 2S-88 konnten mit dem Benzoesäurederivat 79 über eine Amidkopplung verbunden werden. Diese Synthese war sowohl über den von GMEINER benutzten Weg, als auch über die Methode von MOHAPATRA und DATTA erfolgreich. Mit 2R-94 und 2S-94 konnten die ersten Nemonaprid-Analoga, die ein a-Aminopiperidingrundgerüst enthalten, dargestellt werden (Schema 47 und Schema 48). Das Piperidylacetat 2R-88 konnte man mit Lithiumaluminiumhydrid zu dem Piperidylethanol 99 umsetzten. N2 - The goal of this studies was to apply the tandem-Wittig-1,3-dipolar cycloaddition to cyclic acceptor substituted a-hydroxyurethanes. Chiral, non racemic 2-alkyl-5-aminopiperidines should be accessible in high diastereomeric excess by using this reaction. The a-aminopiperidine derivatives should be reacted with 5-chloro-2-methoxy-4-methylaminobenzoic acid to the amides and the pharmacological activities of the achieved compounds should be tested. L-pyroglutamic acid was used as a starting material. The synthesis of the key intermediate 66 starts with a three step reaction sequence to the halogenopyrrolidine derivatives 62 and 63. The introduction of azide functionality by nucleophilic substitution to the azidopyrrolidine derivative 64 followed by the protection of the amide group with Boc2O yielded 65. The hydroxyurethane derivative 66 was obtained in two different ways, namely directly by using a DiBAl-H reducing of 65 and on the other hand by ring opening reaction of 65 with sodium methoxide to 68 followed by a DiBAl-H reduction. For the first time the a-hydroxyurethanes 66 as starting material for the tandem-Wittig-1,3-dipolar cycloaddition reaction was applied. A product mixture of the a,b-unsaturated azido ester 74, the triazoline 75 and the diazo ester 76 was achieved by using acetic acid as a catalyst. A mixture of the cycloaddition products could be obtained again by treatment of the isolated a,b-unsaturated azido ester 74 with acetic acid. Rearrangement of the triazoline 75 to the corresponding diazo ester 76 was achieved by addition of triethylamine. Only the E-configurated compound 74 was obtained. This leads to the conclusion that the Wittig reaction is under thermodynamic control. The cycloaddition shows excellent diastereoselectivity. By using 1H-NMR-spectroscopy the trans-configurated cycloaddition product as the single isomer were determined. An explanation for the diastereoselectivity of the 1,3-dipolar cycloaddition is given by a consideration of the steric and electronic properties of two open chain products namely the a,b-unsaturated azido ester 74. An efficient synthetic pathway to the piperidine derivative 2R-78 was established by catalytic hydrogenation of the diazo ester 76. The other diastereomer should be obtained by Rh-mediated extrusion of nitrogen and distereoselective hydrogenation of the vinylogous urethane 80. To our surprise the piperidine derivative 2R-78 was the main product. 2S-78 could only be obtained as the minor stereoisomer. A reductive amination was the most efficient way to introduce a methyl group to the ring nitrogen atom. Introducing Moc2O lead to the protected piperidine derivatives 2R-82 and 2S-82. The protected piperidine derivative 2R-78 was also obtained by the synthesis of the Moc-protected diazo ester 83 and following hydrogenation. After cleavage of the Boc-protecting groups with methanolic hydrogen chloride the dihydrochlorides 2R-87 and 2S-87 were obtained. The free amines 2R-88 and 2S-88 could be coupled with the benzoic acid derivate 79 by using different coupling methods e.g. the method of MOHAPATRA and DATTA. For the first time with 2R-94 and 2S-94 Nemonaprid analogous, which include a ƒÒ-aminopiperidine structure, were obtained. KW - Piperidinderivate KW - Chemische Synthese KW - Dipolare Cycloaddition KW - Tandem-Reaktion KW - Wittig-Reaktion KW - Tandem-Wittig-1 KW - 3-dipolare Cycloaddition KW - 5-Aminopiperidylessigsäuren KW - Ex-Chiral-Pool Synthese KW - tandem-Wittig-1 KW - 3-dipolar cycloaddition KW - 5-aminopiperidylaceticacid KW - ex-chiral-pool synthesis Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-5207 ER - TY - THES A1 - Güllük, Eduard T1 - Synthese von Cyclopenta[c]pyran-3(5H)-on und Cyclopenta[c]pyran-3(7H)-on als Vorstufen von Cyclopenta[c]pyranen T1 - Synthesis of cyclopenta[c]pyran-3(5H)-one and cyclopenta[c]pyran-3(7H)-one as precursors of cyclopenta[c]pyrans N2 - Die bisher unbekannten a-Pyrone Cyclopenta[c]pyran-3(5H)-on und Cyclopenta[c]pyran-3(7H)-on wurden auf zwei unabhängigen Synthesewegen hergestellt. Die Reaktivität der neuen a-Pyrone wurde untersucht. Das Hauptaugenmerk lag dabei auf der Synthese von Cyclopenta[c]pyranen. N2 - The hitherto unkwown a-pyrones cyclopenta[c]pyran-3(5H)-one and cyclopenta[c]pyran-3(7H)-one were prepared via two independent synthetic pathways. The reactivity of the new a-pyrones was investigated. The main objective was the synthesis of cyclopenta[c]pyrans. KW - Cyclopentapyrane KW - Pyranonen KW - Chemische Synthese KW - Cyclopenta[c]pyran-3(5H)-on KW - Cyclopenta[c]pyran-3(7H)-on KW - Cyclopenta[c]pyrane KW - cyclopenta[c]pyran-3(5H)-one KW - cyclopenta[c]pyran-3(7H)-one KW - cyclopenta[c]pyrans Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-6759 ER - TY - THES A1 - Götz, Daniel Christian Günter T1 - Synthese intrinsisch axial-chiraler mono-, di und trimerer Porphyrine sowie Strukturaufklärung und stereochemische Analyse von chiralen Porphyrinoiden und Naturstoffen durch HPLC-NMR- und HPLC-CD-Kopplung T1 - Synthesis of intrinsically axially chiral mono-, di-, and trimeric porphyrins and structural elucidation and stereochemical analysis of chiral porphyrinoids and natural products by HPLC-NMR and HPLC-CD coupling N2 - Seit der Strukturaufklärung der grünen Blattpigmente Chlorophyll a und Chlorophyll b sowie des roten Blutfarbstoffes Häm durch Richard Willstätter und Hans Fischer zu Beginn des 20. Jahrhunderts stehen tetrapyrrolische Naturstoffe weltweit im Fokus unzähliger biologischer, medizinischer, physikalischer und chemischer Forschungsarbeiten. Heute spielen insbesondere Porphyrine – die prominentesten Vertreter der synthetischen Tetrapyrrol-Makrocyclen – eine bedeutende Rolle in der modernen angewandten Chemie, etwa als metallorganische Katalysatoren, als Photosensibilisatoren in der photodynamischen Krebstherapie oder auf dem Gebiet der Materialwissenschaften. Neben monomeren Porphyrinen sind dabei v.a. Multiporphyrine mit maßgeschneiderten photophysikalischen Eigenschaften und definierter dreidimensionaler Struktur höchst attraktive Syntheseziele. Im Gegensatz zum immensen Forschungsinteresse an achiralen Porphyrin-Systemen wurde der Darstellung und stereochemischen Charakterisierung chiraler Porphyrinoide bislang vergleichsweise wenig Beachtung geschenkt. Insbesondere optisch aktive Vertreter mit stereo-genen Porphyrin-Aryl-Achsen und intrinsisch axial-chirale Oligoporphyrine wurden bislang kaum untersucht. Aufgrund eines Mangels an geeignet funktionalisierten tetrapyrrolischen Vorläufern sind hierbei Strukturmotive mit β-Verknüpfung besonders unterrepräsentiert. Die generell spärliche Beschreibung axial-chiraler Porphyrin-Systeme und ihrer chiroptischen Eigenschaften liegt hauptsächlich in der oft extrem schweren Zugänglichkeit entsprechender Verbindungen – insbesondere in optisch reiner Form – begründet. Aufgrund der derzeit rapide ansteigenden Bedeutung chiraler Porphyrinoide sind die Synthese und stereochemische Analyse sowie eine Erweiterung des bis dato mehr als begrenzten methodischen Repertoires zur stereoselektiven Darstellung von chiralen Porphyrin-Derivaten von größtem Interesse. Ziel der vorliegenden Arbeit war daher die Etablierung effizienter und vielseitig ein-setzbarer Verfahren zum Aufbau komplexer axial-chiraler Mono- und Multiporphyrine mit maßgeschneiderten chemischen, physikalischen und chiroptischen Eigenschaften sowie unter-schiedlicher räumlicher Anordnung der Chromophore. Desweiteren sollten erstmals verschiedene Konzepte zur stereoselektiven Synthese axial-chiraler Porphyrin-Systeme entwickelt und vergleichend erprobt werden. Bei allen bearbeiteten Fragestellungen standen ein tieferes Verständnis stereochemischer Aspekte sowie die eingehende Untersuchung der chiroptischen Eigenschaften (z.B. unter Anwendung moderner HPLC-Kopplungstechniken) der neuartigen synthetisierten Verbindungen im Vordergrund. N2 - Since the structural elucidation of the green leaf pigments chlorophyll a and chlorophyll b and the red blood dye heme by Richard Willstätter and Hans Fischer in the early 20th century, the broad area of tetrapyrrole research has become one of the most exciting, stimulating, and rewarding for scientists from most diverse disciplines like biology, medicince, and chemistry. Today in particular porphyrins – the most prominent representatives amongst synthetic tetrapyrroles – play a crucial role in modern applied chemistry, e.g., as metalorganic catalysts, as photosensitizers in photodynamic cancer therapy or in the field of material science. Besides monomeric porphyrins predominantly multiporphyrin arrays with tailor-made photophysical properties and well-defined three-dimensional structure display highly attractive synthetic targets. In contrast to the tremendous research interests in achiral porphyrin systems comparatively little attention has been paid to the synthesis and stereochemical characterization of chiral porphyrinoids. Especially optically active representatives with stereogenic porphyrin-aryl axes and intrinsically axially chiral oligoporphyrins have hardly been investigated so far. Due to a lack of suitably functionalized tetrapyrrolic precursors, structural motifs based on β-coupled subunits are particularly underrepresented. The fact that axially chiral porphyrins and their chiroptical properties have in general attracted only low attention can be ascribed to the extremely difficult accessibility of such compounds – especially in optically pure form. Be-cause of the nowadays rapidly increasing importance of chiral porphyrinoids, their synthesis and stereochemical analysis as well as an expansion of the – so far greatly limited – methodological repertoire for the stereoselective construction of chiral porphyrin derivatives is of highest interest. Thus, the aim of the present work was to establish efficient and widely applicable procedures for the construction of structurally complex axially chiral mono- and multiporphyrins with taylor-made chemical, physical, and chiroptical properties and well-defined spatial arrangement of the chromophores. In addition, different concepts for the stereoselective synthesis of axially chiral porphyrin systems were to be developed and comparatively evaluated for the first time. For all investigations the main focus concentrated on gaining detailed knowledge of stereochemical aspects and on closely studying the chiroptical behavior (e.g., by using modern HPLC hyphenation techniques) of the newly synthesized compounds. KW - Asymmetrische Synthese KW - CD-Spektroskopie KW - HPLC KW - HPLC-CD-Kopplung KW - HPLC-NMR-Kopplung KW - Organische Synthese KW - Chemische Synthese KW - Zirkulardichroismus KW - HPLC-CD coupling KW - HPLC-NMR coupling Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53377 ER - TY - THES A1 - Gulder, Tobias Alexander Marius T1 - Neue bioaktive Naturstoffe : Strukturaufklärung, Biosynthese und Synthese sowie stereochemische Analyse von Naturstoffen und synthetischen Verbindungen durch HPLC-CD T1 - Novel Bioactive Natural Products : Structural Elucidation, Biosynthesis and Synthesis as well as Stereochemical Analysis of Natural Products and Synthetic Compounds Using HPLC-CD N2 - Die Natur entwickelte im Laufe der Evolution eine unvorstellbare Vielfalt an unterschiedlichsten Lebewesen. Viele diese Organismen besitzen die Fähigkeit, biologisch aktive Sekundärstoffe zu produzieren, die ihnen im täglichen Überlebenskampf einen Vorteil gegenüber ihren Konkurrenten bieten. Die Effizienz, mit der solche Naturstoffe in lebenden Organismen biosynthetisch dargestellt werden, wurde von der organisch-chemischen Synthese bislang nicht annähernd erreicht. Die Untersuchung von Biosynthese-Routen verspricht daher nicht nur die Entdeckung wissenschaftlich interessanter Phänomene, sondern bietet zudem die Chance, von der Natur zu lernen. Die Ergebnisse der vorliegenden Arbeit zeigen dabei deutlich, dass sowohl die genaue Analyse des Aufbaus bereits lange bekannter Metabolite, wie z.B. des Furanonaphthochinons I (FNQ I) oder des Chrysophanols, als auch die Untersuchung der Biosynthese strukturell neuartiger Sekundärstoffe, wie etwa des Sorbicillactons A, von großem Interesse sein können. Die gewonnenen Informationen können dann zur optimierten biotechnologischen oder synthetischen Produktion viel versprechender bioaktiver Substanzen genutzt werden. Auch die Gewinnung neuer Substanzen aus der Natur, z.B. als Leitstrukturen für die Pharma-Forschung, ist ein lohnendes Ziel. Eine stete Verbesserung der Methoden zur Charakterisierung von Naturstoffen, z.B. unter Anwendung von Online-Analyse-Verfahren, hilft dabei, die gezielte Entdeckung noch unbekannter Metabolite schneller und einfacher zu gestalten. Für die Aufklärung der Konstitution von Substanzen nützlich ist hier vor allem die Kopplung von HPLC mit NMR und MS, wie beispielsweise im Rahmen der Identifizierung von Secohyperforin und neuer mariner Macrolactame gezeigt. Die Kombination von HPLC mit CD bietet zudem die Chance zur effizienten Aufklärung der absoluten Stereostruktur chiraler Verbindungen direkt am Peak im Chromatogramm. Ziel der vorliegenden Arbeit war die Isolierung, die biosynthetische und strukturelle Charakterisierung sowie die Produktion bioaktiver Sekundärstoffe unter Anwendung und Weiterentwicklung unterschiedlichster Konzepte und Methoden der Naturstoffchemie. Die vielfältigen Ergebnisse sind das Resultat von interdisziplinären Kooperationen innerhalb des SPP 1152 (DFG Schwerpunktprojekts 'Evolution metabolischer Diversität') und des vom BMBF geförderten Exzellenzzentrums BIOTECmarin ('Nachhaltige Nutzung mariner Schwämme'). N2 - In the course of evolution nature has developed an unimaginable abundance of most diverse creatures. Most of these organisms produce biologically active secondary metabolites, which give them advantages over their competitors in their daily fight for survival. The efficiency of the biosynthesis of such natural products in living organisms has by far not been reached by organic-chemical synthesis. The investigation of biosynthetic routes therefore does not only promise to discover academically interesting phenomena, but additionally provides the chance to learn from nature. The results of the work presented here clearly show that both, the analysis of pathways to long-known metabolites, like, e.g., furanonaphthoquinone I (FNQ I) or chrysophanol, as well as investigations on the biosynthesis of structurally unprecedented, novel secondary metabolites, like, e.g., sorbicillactone A, can be of particular interest. The information thus obtained can then be utilized for an optimized biotechnological or synthetic production of promising biologically active compounds. The extraction of novel substances from natural sources, e.g., as lead structures for pharmaceutical research, is likewise a rewarding goal. The continuous improvement of methods for the characterization of natural products, e.g., by application of online analytical methods, helps to accelerate and to simplify the directed discovery of as yet unknown metabolites. To elucidate the constitutions of compounds, the hyphenation of HPLC with NMR and MS is of particular value, as it becomes obvious from the identification of secohyperforin and of new marine macrolactams. The combination of HPLC and CD additionally offers the possibility to elucidate full absolute stereostructures of chiral compounds directly from the peak in the chromatogram. The aim of the present work was the isolation, characterization, and production of secondary metabolites by applying und further developing diverse concepts and methods of natural products chemistry. The versatile findings are the result of interdisciplinary cooperations within the SPP 1152 (DFG priority programme 'Evolution of Metabolic Diversity') and the BMBF-funded center of excellence BIOTECmarin ('Sustainable Use of Marine Sponges'). KW - Naturstoff KW - Biosynthese KW - Chemische Synthese KW - HPLC-CD-NMR KW - Natural Products KW - Biosynthesis KW - Chemical Synthesis KW - HPLC-CD-NMR Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26789 ER - TY - THES A1 - Gehrold, Andreas Christian T1 - Synthese und stereochemische Eigenschaften von monomeren Henkelporphyrinen und deren Einsatzmöglichkeiten in di- und trimeren Systemen T1 - Synthesis and stereochemical properties of monomeric basket-handle porphyrins and their use in di- and trimeric arrays N2 - Tetrapyrrole sind nicht nur in natürlichen Systemen von herausragender Bedeutung, sondern haben sich im letzten Jahrhundert zu einem zentralen Forschungsgegenstand verschiedener Naturwissenschaften entwickelt. Chirale Vertreter sind, trotz ihrer Bedeutung in der Natur, hierbei nur am Rande untersucht worden. Im Rahmen der vorliegenden Arbeit wurde, ausgehend von p-Xylylen-verbrückten Porphyrinen, sogenannten Henkelporphyrinen, eine Vielzahl an chiralen Strukturen synthetisiert und stereochemisch untersucht. Die monomeren Vertreter waren abhängig vom Substitutionsmuster der Henkeleinheit achiral oder planar-chiral. Über eine kurze und effiziente Syntheseroute wurden die Grundkörper im Multigramm-Maßstab aufgebaut und anschließend sowohl strukturell modifiziert als auch funktionalisiert. Die chiralen Vertreter wurden mittels HPLC an chiraler Phase in die Enantiomere getrennt und mittels online-ECD-Spektroskopie wurden die ECD-Spektren im stopped-flow-Modus gemessen. Der Vergleich mit quantenchemisch berechneten ECD-Kurven erlaubte die sichere Zuordnung der Absolutkonfigurationen. Des Weiteren wurden die Monomere röntgenkristallographisch, UV-Vis-spektroskopisch und elektrochemisch eingehend untersucht. Ausgehend von den monomeren Vertretern wurden mittels direkter oxidativer Kupplung oder über Übergangsmetall-katalysierte Verfahren di- und trimere Systeme aufgebaut. Diese lagen als axial-, helikal- oder planar-chirale Strukturen vor. HPLC-ECD-Kopplung in Verbindung mit quantenchemischen Rechnungen erlaubte auch hier die Aufklärung der absoluten Stereostrukturen. Neben klassischen Porphyrin-Vertretern wurden im Rahmen dieser Arbeit erstmals Henkelchlorine durch OsO4-vermittelte Dihydroxylierung der Henkelporphyrine synthetisiert und vollständig charakterisiert. Außerdem gelang in Kooperation mit Prof. Brückner (UConn) die Aufklärung der Absolutkonfigurationen helikal-chiraler Indachlorine. Die Arbeit liefert insgesamt eine breite Plattform an chiralen Porphyrinoiden, die für weitere Untersuchungen zu Reaktivität und Struktur von größtem Interesse sind, sowie erste detaillierte Einblicke in die faszinierenden Eigenschaften dieser Substanzklasse. N2 - Tetrapyrroles are of outstanding importance not only in naturally occurring systems, but also they have become a central research topic during the last century. Yet, chiral representatives were, despite their importance in nature, only investigated marginally. This work deals with the syntheses and stereochemical investigations of a plethora of chiral Systems based on p-xylylene-bridged porphyrins, so called basket-handle porphyrins. The monomeric representatives were achiral or chiral only by difference of the substitution pattern of the handle unit. Via a short and efficient synthesis, the core motif was accessible in multi-gram quantities. Subsequent modifications as well as functionalizations were achieved. The chiral derivatives were resolved into their enantiomers by HPLC on a chiral phase and their ECD spectra were recorded online in the stopped-flow mode. By comparison with quantum-chemically obtained ECD curves the absolute configurations were established. Additionally, the monomers were characterized by X-ray crystallography, UV-Vis spectroscopy, and electrochemical methods. Starting from the monomers, a variety of di- and trimeric arrays was synthesized by direct oxidative coupling or by transition-metal catalyzed reactions. These systems were either helically, axially, or planar-chiral. HPLC-ECD coupling in combination with quantum-chemical calculations permitted the assignment of the absolute stereostructures. Besides the classical porphyrins, basket-handle chlorins were synthesized by OsO4-mediated dihydroxylation of the basket-handle porphyrins and their absolute configurations were established. Furthermore, in cooperation with Prof. Brückner (UConn) the absolute stereostructures of novel helically chiral Indachlorins was assigned. In summary, this work provides a broad variety of chiral porphyrinoids, which are ideal candidates for further investigations regarding their chemical reactivity and their structural features, and included first detailed insight into the fascinating properties of this class of compounds. KW - Porphyrin KW - Zirkulardichroismus KW - Stereochemie KW - Organische Synthese KW - Chemische Synthese KW - HPLC-ECD-Kopplung KW - Organische Synthese KW - Porphyrine KW - organic synthesis KW - porphyrin chemistry KW - HPLC-ECD-coupling KW - ECD-Spektroskopie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134048 ER - TY - THES A1 - Fink, Julian T1 - Synthese von molekularen Werkzeugen zur Visualisierung und Untersuchung des Sphingolipidmetabolismus und weiterer biologischer Prozesse T1 - Synthesis of molecular tools to visualize and study sphingolipid metabolism and other biological processes N2 - Die Zelle stellt die kleinste Einheit des Lebens dar und zeichnet sich durch die hoch koordinierte Anordnung von mehreren Millionen (Bio-)Molekülen zu einem mikrometergroßen Objekt aus. Als struktureller Bestandteil der Lipiddoppelschicht eukaryotischer Zellen spielt neben Sterolen und Glycerolipiden die Verbindungsklasse der Sphingolipide eine zentrale Rolle bei der Aufrechterhaltung der Membranintegrität.[472] Darüber hinaus sind bioaktive Sphingolipide bei vielen grundlegenden zellulären Prozessen wie Apoptose, Wachstum, Differenzierung, Migration und Adhäsion entscheidend beteiligt.[87,120] Ein gestörtes Gleichgewicht des Sphingolipidmetabolismus und Defekte der entsprechenden Stoffwechselwege stehen im Zusammenhang mit vielen Krankheiten wie Krebs, Diabetes, Adipositas, Arteriosklerose, chronischen Entzündungen und Autoimmunerkrankungen sowie viraler und bakterieller Pathogenese.[22,143,473,474] Die Entwicklung und Anwendung von Sphingolipidanaloga als potenzielle Wirkstoffe rückten in den letzten Jahren immer weiter in den Fokus der interdisziplinären Forschung von Biologen, Chemikern und Medizinern. Als bekanntestes Beispiel ist Fingolimod (FTY720) zu nennen, das als Sphingosin-1-phosphat-Mimetikum heute unter dem Markennamen Gilenya® erfolgreich als Arzneistoff zur Behandlung von Multipler Sklerose eingesetzt wird.[475] Es besteht jedoch die Gefahr, dass Fingolimod zur Schädigung anderer Zellfunktionen und zu gravierenden Nebeneffekten wie Bradykardie führen kann.[476] Da Sphingolipide ebenfalls in der Kontrolle von bakteriellen und viralen Infektionen essentiell beteiligt sind, spielen Sphingolipide und deren synthetisch dargestellte Derivate vermehrt eine Rolle in der Wirkstoffentwicklung im Kampf gegen pathogene Krankheitserreger.[175,477-479] Die Wirkweise von antimikrobiellen Sphingolipiden ist bisher nicht vollständig aufgeklärt. Für eine Weiterentwicklung von bekannten Medikamenten gegen verschiedene Krankheiten oder für die Entwicklung neuartiger Wirkstoffe gegen Erreger ist eine umfassende Untersuchung der zugrundeliegenden zellulären Mechanismen auf molekularer Ebene entscheidend. Hierfür finden aufgrund der relativ einfachen Detektion mittels Fluoreszenzmikroskopie häufig fluoreszenzmarkierte Sphingolipidderivate breite Anwendung.[480] Die kovalent gebundene Farbstoffeinheit bringt jedoch wesentliche Nachteile mit sich, da sich die Biomoleküle durch die veränderte Struktur und Polarität in ihren biologischen Eigenschaften von den natürlichen Substraten unterscheiden können. Die Verwendung von bioorthogonal funktionalisierten Biomolekülen umgeht dieses Problem, da die strukturellen Änderungen minimal gehalten werden. Nach dem zellulären Einbau dieser Derivate ist eine schnelle und spezifische Konjugation mit einem komplementären Fluorophor zu einem gewünschten Zeitpunkt durch sogenannte Click-Reaktionen wie CuAAC oder SPAAC möglich.[12,46] Das Prinzip der Click-Chemie wurde bereits auf eine Vielzahl an Biomolekülen wie Sphingolipide, Fettsäuren, Aminosäuren, Proteine, Kohlenhydrate, Nukleoside oder Nukleinsäuren (DNA und RNA) übertragen.[47,280] Jedoch bedarf es weiterer spezifisch modifizierter Verbindungen, die vielfältige bioorthogonale Reaktionen für die Untersuchung von Zellprozessen zulassen ‒ sowohl in vitro als auch in vivo. Um neue Therapieansätze gegen verschiedene Krankheiten zu entwickeln und schwerwiegende Nebenwirkungen zu vermeiden, ist die detaillierte Erforschung hochkomplexer Zellvorgänge auf molekularer Ebene von entscheidender Bedeutung. Das Ziel dieser Arbeit war daher die Synthese und Charakterisierung von molekularen Werkzeugen, die in Kombination mit verschiedenen aktuellen Mikroskopie- und Massenspektrometriemethoden die Visualisierung und Untersuchung des Sphingolipidmetabolismus und weiterer biologischer Prozesse ermöglichen. Zusammenfassend wurde in dieser Arbeit eine Vielzahl an Sphingolipiden und deren bioorthogonal funktionalisierte Analoga ausgehend von der Aminosäure L-Serin erfolgreich synthetisiert. Die vorgestellten Verbindungen eignen sich in Kombination mit Massenspektrometrie und Fluoreszenz- oder Elektronenmikroskopie als molekulare Werkzeuge zur Untersuchung des komplexen Sphingolipidmetabolismus sowie des Einbaus und der Dynamik von Sphingolipiden in Modell- und Zellmembranen. Sowohl in humanen und tierischen Zellen als auch in Bakterien wurden die azidmodifizierten Sphingolipide durch Click-Reaktionen visualisiert, um ein verbessertes Verständnis von bakteriellen und viralen Infektionsprozessen zu erhalten. Der modulare Ansatz der Click-Chemie ermöglicht die Verwendung verschiedener komplementär funktionalisierter Farbstoffe, die unterschiedliche Eigenschaften bezüglich der Membrandurchgängigkeit oder Absorptions- und Emissionswellenlängen besitzen und somit je nach biologischer Fragestellung gezielt eingesetzt werden können. Alles in allem tragen die in dieser Arbeit synthetisierten Verbindungen dazu bei, die Rolle von Sphingolipiden bei Infektionsprozessen und Krankheitsverläufen auf subzellulärer Ebene aufzuklären. Dadurch wird ein entscheidender Beitrag für die Entwicklung neuartiger Wirkstoffe gegen bakterielle oder virale Erreger sowie innovativer Therapien gegen verschiedene humane Krankheiten geliefert. N2 - The cell represents the smallest unit of life and is characterized by the highly coordinated arrangement of several million (bio)molecules to form a micrometer-sized object. As a structural component of the lipid bilayer of eukaryotic cells, in addition to sterols and glycerophospholipids, the compound class of sphingolipids plays a central role in maintaining membrane integrity.[472] In addition, bioactive sphingolipids are critically involved in many basic cellular processes such as apoptosis, growth, differentiation, migration and adhesion.[87,120] A disturbed balance of the sphingolipid metabolism and defects in the corresponding metabolic pathways are associated with many diseases such as cancer, diabetes, obesity, arteriosclerosis, chronic inflammation and autoimmune diseases as well as viral and bacterial pathogenesis.[22,143,473,474] The development and application of sphingolipid analogues as potential active ingredients have moved more and more into the focus of interdisciplinary research by biologists, chemists and medical professionals in recent years. The best-known example is fingolimod (FTY720), which is now successfully used as a sphingosine-1-phosphate mimetic under the brand name Gilenya® as a drug for the treatment of multiple sclerosis.[475] However, there is a risk that fingolimod can damage other cell functions and lead to serious side effects such as bradycardia.[476] Since sphingolipids are also essential for the control of bacterial and viral infections, sphingolipids and their synthetically produced derivatives are playing an increasing a role in the development of active ingredients in the fight against pathogenic germs.[175,477-479] The mode of action of antimicrobial sphingolipids has not yet been fully elucidated. A comprehensive investigation of the underlying cellular mechanisms at the molecular level is crucial for further development of known drugs against various diseases or for the development of novel active substances against pathogens. Due to the relatively easy detection by fluorescence microscopy, fluorescence-labeled sphingolipid derivatives are widely used for this purpose.[480] However, the covalently bonded dye unit has significant disadvantages since the biological properties of the biomolecules can differ from the natural substrates concerning structure and polarity changes. The usage of bioorthogonally functionalized biomolecules avoids this problem because the structural changes are kept to a minimum. After the cellular incorporation of these derivatives, rapid and specific conjugation with a complementary fluorophore at a desired point of time is possible by so-called click reactions such as CuAAC or SPAAC.[12,46] The concept of click chemistry has already been applied to a large number of biomolecules such as sphingolipids, fatty acids, amino acids, proteins, carbohydrates, nucleosides or nucleic acids (DNA and RNA).[47,280] However, further specifically modified compounds are required, allowing diverse bioorthogonal reactions for the investigation of cell processes – both in vitro and in vivo. In order to develop new therapeutic approaches against numerous diseases and to avoid serious side effects, detailed research into highly complex cell processes at the molecular level is of crucial importance. Therefore, the aim of this work was the synthesis and characterization of molecular tools which, in combination with several current microscopy and mass spectrometry methods, enable the visualization and investigation of the sphingolipid metabolism and other biological processes. In summary, a variety of sphingolipids and their bioorthogonally functionalized analogues were successfully synthesized in this work starting from the amino acid L-serine. In combination with mass spectrometry and fluorescence or electron microscopy, the presented compounds are suitable as molecular tools for the investigation of the complex sphingolipid metabolism as well as the incorporation and dynamics of sphingolipids in model and cell membranes. The azide-modified sphingolipids were visualized by click reactions in human and animal cells as well as in bacteria to gain a better understanding of bacterial and viral infection processes. The modular approach of click chemistry enables the use of different complementarily functionalized dyes that have different properties in terms of membrane permeability or absorption and emission wavelengths and can therefore be used in a targeted manner depending on the biological issue. All in all, the compounds synthesized in this work help to elucidate the role of sphingolipids in infection processes and disease progression at subcellular level. This makes a decisive contribution to the development of novel active substances against bacterial or viral pathogens as well as of innovative therapies against various human diseases. KW - Chemische Synthese KW - Sphingolipide KW - Click-Chemie KW - Organische Synthese KW - Sphingolipidderivate KW - bioorthogonale Markierung KW - Wirkstoffentwicklung KW - Infektionsprozesse KW - Sphingolipidanaloga KW - Sphingolipidstoffwechsel Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-286992 ER - TY - THES A1 - Bickert, Volker T1 - Neue künstliche Guanidiniocarbonylpyrrol-Rezeptoren zur Komplexierung von Oxo-Anionen in Wasser T1 - New artificial Guanidiniocarbonyl Pyrrole Receptors for the Complexation of Oxo-Anions in Water N2 - Ziel der Dissertation „Neue künstliche Guanidiniocarbonylpyrrol-Rezeptoren zur Komplexierung von Oxo-Anionen in Wasser“ war die Weiterentwicklung dieser Rezeptoren nach Schmuck für die Komplexierung insbesondere von Carboxylaten, um sie hinsichtlich Bindungsaffinität und Substratspezifität zu optimieren. Dazu wurde zunächst die Synthese zweier wichtiger Grundbausteine in einzelnen Schritten vollständig überarbeitet, wobei veränderte Reaktionsbedingungen und Aufarbeitungsschritte zu gesteigerten Ausbeuten führten. Dadurch ist es nun möglich, diese Bausteine effizienter zu synthetisieren und im Multigramm-Maßstab für die Darstellung von Rezeptoren zur Oxo-Anionen-Erkennung einzusetzen. Weiterhin wurde die Verbesserung der Komplexierungseigenschaften gegenüber Carboxylaten auf zwei Arten untersucht: zum einen durch das Anbringen eines zusätzlichen Seitenarms an der Guanidinio-Einheit zur Bildung von Guanidiniocarbonylpyrrol-Tweezer-Rezeptoren, zum anderen durch das Einführen einer zweiten positiven Ladung neben der Carboxylat-Bindungsstelle (CBS) zur Darstellung biskationischer Guanidiniocarbonylpyrrol-Rezeptoren. Zur Darstellung von Tweezer-Rezeptoren wurde ein zusätzlicher Seitenarm an der N’-Position der Guanidinio-Einheit angebracht. Die beiden Arme sollten ein Substrat pinzettenartig von zwei Seiten, mit der CBS als Kopfgruppe, komplexieren können. Durch zusätzliche Wechselwirkungen des neuen Seitenarms sollte neben einer stärkeren Komplexierung vor allem eine höhere Substratspezifität erzielt werden. Die experimentell ermittelten Bindungskonstanten lagen allerdings im Bereich der N’-unsubstituierten Rezeptoren. Somit stellen die Tweezer-Modifikationen daher keine Verbesserung der Guanidiniocarbonylpyrrol-Rezeptoren dar. In einem weiteren Projekt zur Rezeptor-Optimierung wurden, durch Einführung einer zweiten positiven Ladung in Form einer terminalen Ammonium-Gruppe, biskationische Guanidiniocarbonylpyrrol-Rezeptoren erfolgreich synthetisiert. Die Komplexierungseigenschaften dieser biskationischen Rezeptoren wurden in Bindungsstudien vornehmlich mit Aminosäurecarboxylaten mittels UV- und Fluoreszenz-Spektroskopie, Massenspektrometrie, NMR-Spektroskopie, ITC und Molecular Modeling Berechnungen untersucht. Anhand der Substratspezifität der biskationischen Rezeptoren wurde deutlich, dass die Spacerlänge, an der die zusätzliche positive Ladung angebracht ist, eine entscheidende Rolle bei der Komplexierung spielte. Galten eigentlich starre, präorganisierte, kurze Linker als vorteilhaft hinsichtlich der Entropie, so ist hier zu erkennen, dass längere, flexiblere Linker zu einer besseren Komplexierung führen können, wenn geeignete zusätzliche nichtkovalente Wechselwirkungen möglich sind. Die biskationischen Rezeptoren stellen damit eine Optimierung des Carboxylat-Bindungsmotivs der Guanidiniocarbonylpyrrol-Rezeptoren nach Schmuck in der Anionen-Erkennung dar. N2 - The main focus of the thesis “New artificial guanidiniocarbonyl pyrrole receptors for the complexation of oxo-anions in water” is the optimization of these receptors introduced by Schmuck for the oxo-anion recognition, especially carboxylates, in aqueous solution. Therefore, the details of the synthesis of two important building blocks were completely revised and yields increased by changing reaction conditions, workup and isolation steps. The new optimized, facile and efficient synthetic route to these N-protected guanidinocarbonyl pyrrole derivatives allows now a multi-gram synthesis of these versatile compounds as needed for the synthesis for a variety of supramolecular anion binding motifs. Furthermore two strategies to optimize the anion recognition have been pursued: On the one hand tweezer receptors were developed by connecting an additional side chain to the head group at the N’-position of the guanidino group. On the other hand another second positive charge was introduced into the receptor besides the carboxylate binding site (CBS) by an ammonium group to get bis-cationic receptors The tweezer receptors were developed in order to complex the guest from more than one side. A second side chain, connected to the N’-position of the guanidinio motif, leads to this kind of receptor, with the CBS as a head group. By using additional non covalent interactions in both side chains, the association constant as well as the specificity should be increased. In case of the optimization of the binding properties, the tweezer receptors have showen binding properties similar to the N’-unsubstituted guanidiniocarbonyl pyrrole receptors with respect to association constants and specificity. For this reason the tweezer receptors were no improvement of the guanidiniocarbonyl pyrrole receptors. In another project for optimization of the binding properties several bis-cations were synthesized, with a simple primary ammonium cation attached via flexible linkers of varying length to a guanidiniocarbonyl pyrrole. In UV-binding studies in aqueous buffer these bis-cations have shown efficient binding of various N-acetyl amino acid carboxylates. Further investigations by fluorescence spectroscopy, mass spectrometry, NMR spectroscopy, ITC as well as molecular mechanics calculations confirm the complexation by participation of the second charge in the complexation of the carboxylic function and therefore an increasing in complex stability. It is generally assumed, that short and rigid linkers are better for complexation due to the entropy and that a steady decrease of a linker length increase the complex stability. However, this case shows, that complex stability can increase while increasing the flexibility of a linker until other non covalent interactions are possible. Hence, the bis-cationic receptors indeed represent an optimisation of the guanidiniocarbonyl pyrrole receptors for oxo-anion-binding. KW - Molekulare Erkennung KW - Anion KW - Wirkstoff-Rezeptor-Bindung KW - Ligand KW - Peptidsynthese KW - Chemische Synthese KW - Guanidinderivate KW - Oxo-Anionen-Erkennung KW - Guanidiniocarbonylpyrrol KW - nicht-kovalente Wechselwirkungen KW - Supramolekulare Chemie KW - Tweezer-Rezeptoren KW - oxo anion recognition KW - guanidiniocarbonyl pyrrole KW - non-covalent interactions KW - supramolecular chemistry KW - tweezer receptors Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32460 ER - TY - THES A1 - Berkefeld, André T1 - Der Silicium-α-Effekt : experimentelle Untersuchungen der Hydrolyse von Cα- und Cγ-funktionalisierten Alkoxytriorganylsilanen T1 - Silicon α-Effect: A Experimental Study of the Hydrolysis of Cα- and Cγ-functionalized Alkoxytriorganylsilanes N2 - Um den Silicium-α-Effekt "als vergrößerte Reaktivität der Si–OC-Bindung" von α-Silanen der allgemeinen Formel ROSiMe2CH2X verglichen mit den entsprechenden γ-Silanen des Typs ROSiMe2(CH2)3X (R = Me, Et; X = funktionelle Gruppe) besser zu verstehen, wurde im Rahmen dieser Arbeit eine systematische experimentelle Untersuchung der Hydrolyse der genannten Alkoxy¬silane durchgeführt. Um die Abhängigkeit der Hydrolyse von der funktionellen Gruppe X, dem Abstand zwischen dem Silicium-Atom und der funktionellen Gruppe X (CH2 oder (CH2)3, α- oder γ-Silan) und dem pD-Wert zu untersuchen, wurde eine Vielzahl an kinetischer Hydrolyse-Studien in CD3CN/D2O unter selbsteinstellendem pD-Wert, unter Verwendung von Pufferlösungen und unter definierten basischen und sauren Bedingungen durchgeführt. Die Kinetik der Hydrolyse der untersuchten Silane wurde dabei mittels 1H-NMR Spektroskopie verfolgt. Die Ergebnisse dieser Untersuchungen zeigen eindeutig, dass der Silicium-α-Effekt nicht als ein einziger Effekt der funktionellen Gruppen verstanden werden kann. Im Gegenteil, die verschiedenen beobachteten Reaktivitäten sind das Resultat mehrerer verschiedener Teileffekte. Die jeweils beobachtete Reaktivität entspricht der Summe der möglichen Teileffekte und kann nicht durch einen bestimmten Silicium-α-Effekt erklärt werden. N2 - To understand the silicon α effect in terms of an enhanced reactivity of the Si–OC bond of α-silanes of the formula type ROSiMe2CH2X compared to analogous γ silanes ROSiMe2(CH2)3X (R = Me, Et; X = functional group), a systematic experimental study of the kinetics and mechanisms of hydrolysis of such compounds was performed. For this purpose, a series of suitable model compounds was synthesized and studied for their hydrolysis kinetics in CD3CN/D2O under basic and acidic conditions, using 1H NMR spectroscopy as the analytical tool. These investigations demonstrated that the silicon α-effect cannot be rationalized in terms of a special single effect. The reactivities observed rather result from a summation of different components, such as electronic and steric effects, pD dependence, and hydrogen bonds between the functional group (or even protonated functional group) and the alkoxy leaving group. KW - Chemische Synthese KW - Alkoxysilane KW - Hydrolyse KW - Silanderivate KW - alpha-Effekt KW - Alkoxysilane KW - hydrolysis kinetics KW - nucleophilic substitution KW - reaction mechanisms KW - Nucleophile Substitution KW - Silicium KW - Magnetische Kernresonanz KW - Synthese Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85155 ER -