TY - THES A1 - Schweeberg, Sarah T1 - Biomedizinische Anwendung von Nanodiamant: Untersuchungen zu den Wechselwirkungen mit der biologischen Umgebung und zur gezielten Wirkstofffreisetzung T1 - Biomedical applications of nanodiamond: Examinations of the interactions with the biological environment and controlled drug release N2 - Nanodiamant bietet in der Medizin und in der Biologie zahlreiche Anwendungsmöglichkeiten aufgrund der guten Biokompatibilität und geringen Toxizität. Durch die umfangreichen Funktionalisierungsmöglichkeiten der Oberfläche der nanometergroßen Partikel können viele unterschiedliche Wirkstoffe, Rezeptormoleküle oder Peptidsequenzen angebunden werden ,die zusammen mit Nanodiamant ein anderes, durchaus besseres Wirkprofil aufweisen als der Wirkstoff allein. Ziel dieser Arbeit war die Synthese eines pH-labilen Linkersystems, dass hydroxylhaltige Wirkstoffe kovalent bindet und zusammen mit Nanodiamant in die Zelle, in der ein saurer pH-Wert herrscht, eingeschleust werden. Über die Änderung des pH-Wertes in der Zelle soll der Wirkstoff freigesetzt werden und seine Wirkung entfalten können. Weiterhin wurde ein pH-labiles Linkersystem auf der Basis eines Hydrazons hergestellt. Über das synthetisierte Hydrazinderivat können Wirkstoffe, die über eine Aldehyd- oder Ketonfunktion verfügen angebunden werden und pH-labil in der Zelle freigesetzt werden. Zusätzlich trägt der Nanodiamant ein kovalent angebundenes Targeting-Molekül, welches eine verbesserte Adressierung der Wirkorte gewähr¬leisten soll. Die Freisetzung wurde mittels UV-Vis-Spektroskopie detektiert und ausgewertet. Neben der spezifischen Funktionalisierung von Nanodiamant besitzt auch die Interaktion der Nanodiamantpartikel mit biologischen Medien eine besondere Bedeutung für zukünftige biomedizinische Anwendungen. Wenn die Partikeloberfläche durch Proteinadsorption gegenüber dem Wirkort abgeschirmt wird, so kann der angebundene Wirkstoff gegebenenfalls nicht freigesetzt werden und somit nicht seine Wirkung entfalten und bleibt letztlich ungenutzt. So war es von besonderem Interesse die Wechselwirkungen von Nanodiamant in Humanserum und auch weiteren physiologischen Medien zu untersuchen. Dabei wurden sowohl freie Nanodiamantpartikel als auch solche, die auf klinisch bereits eingesetzten Gerüstmaterialien im Bereich der Therapie großer Knochendefekte adsorbiert waren, untersucht. Auch wurden die Wechselwirkungen von Nanodiamant mit der physiologischen Umgebung untersucht, die zur Agglomeration der Nanopartikel führen können. Es wurde ein unter¬schiedliches Agglomerationsverhalten der Nanodiamanten in wässriger Umgebung verglichen mit Nanodiamanten in physiologischen Medien sowie deren Stabilität im Serum beobachtet. Durch die in dieser Arbeit vorgestellten Untersuchungen konnten wichtige Erkenntnisse zur Wechselwirkung verschieden präparierter und funktionalisierter Nanodiamanten mit physiologisch relevanten Umgebungen sowie zu stimuli-responsiven Wirkstofffreisetzung aus Nanodiamant-Konjugaten gewonnen werden. Zudem wurde mit der Untersuchung der angelagerten Proteine um Nanodiamant ein erster Schritt in Richtung eines umfassenden Verständnisses der Wechselwirkung dieses Materials mit biologischen Umgebungen unternommen. Auch wenn diese Wechselwirkungen sehr komplex sind, so sind erste Aussagen bezüglich der Art der angelagerten Proteine möglich. Erste Versuche der Stabilisierung von Nanodiamant in physiologischen Medien wurden ebenfalls erfolgreich durchgeführt und zeigen eine effiziente und einfache Möglichkeit, Nanodiamant in biologischen Medien vor der Agglomeration zu bewahren. Die im Rahmen dieser Arbeit gewonnen Erkenntnisse bezüglich mehrfacher Funktionalisierungsmöglichkeiten von Nanodiamant sowie dessen Stabilisierung in physiologischen Medien zeigen die breite Anwendungsmöglichkeit und das enorme Potential von Nanodiamant im Bereich medizinischer und biologischer Anwendungen auf. N2 - Nanodiamond offers various possible applications in medicine and biology because of its good biocompatibility and low toxicity. Due to the extensive opportunities functionalizing the surface of the nanosized particles it is possible to bind a lot of different active pharmaceutical ingredients (API), receptor molecules or peptide sequences. This functionalization can result in an improved efficacy compared to the profile of the drug alone. The aim of this thesis was the synthesis of a pH-labile linkersystem which covalently binds hydroxyl group-containing APIs and transfer them together with nanodiamond into the cells, where an acidic environment is predominant. Because of the change of the pH-value the drug gets released and can take its effect. Furthermore, a pH-labile linkersystem based on the formation of a hydrazon bond was synthesized. APIs containing an aldehyde or a ketone can be linked to the synthesized hydrazine derivative 70 and be released in cells due to the acid-labile bond. Additionally, the nanodiamond has a covalently bound targeting molecule to assure an improved uptake into the cell. The release of Doxorubicin was detected and evaluated via UV-Vis-spectroscopy. Besides the specific functionalization, the interaction of nanodiamond particles with biological media is gaining more and more importance regarding future biomedical applications. If the particle surface is shielded with proteins it is possible that the linked drug cannot be released, remains unused and cannot develop its desired effect. Because of this reason it was of main interest to examine the interactions of nanodiamond in human serum and further physiological media. Nanodiamond without further functionalization were analysed as well as nanodiamonds which are adsorbed on materials that are already in clinical usage in the field of greater bone defects. The interactions of nanodiamond with a physiological environment which can lead to the agglomeration of the particles was also examined. A different agglomeration bahaviour of nanodiamond in aqueous media was compared to nanodiamond in physiological media as well as their stability in serum. Due to the presented studies in this thesis important insights into the interactions of functionalized and different prepared nanodiamonds with physiological relevant environments as well as with stimuli-responsive drug release from nanodiamond conjugates were obtained. Furthermore, the examinations of the attached proteins around nanodiamond is the first step getting towards a better comprehensive understanding of the interactions of this material with its biological environment. Even if these interactions are very complex, first statements according to the type of attached proteins are possible. First trials of stabilizing nanodiamond in physiological media have been carried out successfully and demonstrate an easy and effective way to hinder agglomeration of nanodiamond in biological media. Finally, the insights gained in this thesis regarding the multiple possibilities of nanodiamond as well as their stabilization in physiological media offers a broad range of applications and the tremendous potential of nanodiamond in the field of medical and biological research. KW - Nanopartikel KW - nanodiamond KW - Wirkstofffreisetzung KW - drug release KW - Diamant KW - Wirkstofffreisetzung KW - Nanodiamant Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174619 ER - TY - THES A1 - Hinderer, Sandra T1 - Charakterisierung der Freisetzung verschiedener Antibiotika aus resorbierbaren anorganischen Knochenersatzmaterialien sowie die Untersuchung des Einflusses auf materialcharakteristische Eigenschaften T1 - Characterization of the release of various antibiotics from resorbable inorganic bone substitute materials and the study of the influence on material characteristic properties N2 - Synthetische anorganische Knochenersatzmaterialien auf Calcium-Phosphat- und Magnesium-Phosphat-Basis wurden in der hier vorliegenden Dissertation mit verschiedenen handelsüblichen Antibiotika versetzt und deren Freisetzungsverhalten charakterisiert. Zudem wurde der Einfluss des Antibiotikazusatzes auf bestimmte materialcharakteristische Eigenschaften untersucht, hierbei fanden die Quecksilberporosimetrie, die Röntgendiffraktometrie und die Rasterelektronenmikroskopie ihre Anwendung. Insbesondere für die Knochenersatzmaterialien auf Calcium-Phosphat-Basis sollte eine klinisch praktikable und demnach möglichst einfache Methode etabliert werden, um die Kombination mit einem Antibiotikum durchzuführen. Die Detektion der Antibiotika erfolgte mit Hilfe eines UV/VIS-Spektrophotometers. Zudem wurde für einige ausgewählte Kombinationen aus Antibiotikum und Knochenersatzmaterial durch einen Agardiffusionstest die antibakterielle Wirkung nach der Freisetzung aus dem jeweiligen Trägermaterial bestätigt. N2 - Synthetic inorganic bone substitute materials based on calcium phosphate and magnesium phosphate were mixed with various commercially available antibiotics and their release behavior was characterized in the present dissertation. In addition, the influence of the antibiotic addition on certain material characteristic properties was investigated using mercury porosimetry, X-ray diffractometry and scanning electron microscopy. For the calcium-phosphate-based bone substitutes in particular, the aim was to establish a clinically practicable and therefore as simple as possible method for carrying out the combination with an antibiotic. Antibiotics were detected using a UV/VIS spectrophotometer. In addition, for some selected combinations of antibiotic and bone substitute material, an agar diffusion test was used to confirm the antibacterial effect after release from the respective carrier material. KW - Wirkstofffreisetzung KW - Antibiotikum KW - Knochenzement KW - Calciumphosphat KW - UV-VIS-Spektroskopie KW - Antibiotikafreisetzung KW - local drug delivery Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230836 ER - TY - THES A1 - Waag, Thilo T1 - Funktionalisierung von Nanodiamanten für Wirkstofftransport und Knochenersatzmaterialien T1 - Functionalization of nanodiamonds for drug delivery and alternate bone material N2 - Ziel der vorliegenden Arbeit ist das Design, die Synthese und das anschließende Testen von Nanodiamant-Wirkstoff-Konjugaten. Dafür müssen zunächst Nanodiamanten mit geeigneten Linkersystemen funktionalisiert werden, um anschließend verschiedene pharmazeutische Wirkstoffe auf der Diamantoberfläche zu immobilisieren. Die Wirksamkeit der so angebundenen Inhibitoren auf die verschiedenen Erreger muss anschließend in vitro und in vivo getestet werden. Auch die Art der Aufnahme der Nanodiamanten in die verschiedenen Zellen muss untersucht werden. Dazu sollen Fluoreszenzfarbstoffe, wie z.B. Oregon Green 488, auf der Diamantoberfläche immobilisiert werden. N2 - Because of its low toxicity and rich surface chemistry nanodiamond is well suited for the application in the fields of biology and medicine. The aim of this work is the development of various nanodiamond conjugates as drug delivery systems and components of bone replacement materials. Before the immobilization of drugs the nanodiamond particles need to be functionalized with acid labile linker systems, in this case hydrazones. After entering the acidic cell compartments the drug is released. First of all, the linkers are isolated as diazonium-tetrafluoroborates and after that immobilized on mechanically deagglomerated nanodiamond. The drugs can be bound to the hydrazine linker systems. In this work several drugs are immobilized to the nanodiamond surface via hydrazine linker systems and the drug release under acidic conditions is analyzed. Further compounds are immobilized for the investigation for future bone replacement materials, namely dyes and growth factors. KW - Nanodiamant KW - nanomateriales KW - nanotherapeutics KW - Diamant KW - Nanostrukturiertes Material KW - Wirkstofffreisetzung KW - Knochenersatz Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-94597 ER - TY - THES A1 - Wagenhöfer, Julian T1 - Mikro- und mesoporöse Silicate als Wirkstoffspeichersysteme T1 - Micro and mesoporous silica for drug-delivery-systems N2 - Mesoporöse Silica-Materialien (MSM) und mikroporöse Zeolithe besitzen große innere Oberflächen und eine damit verbundene hohe Speicherkapazität von verschiedenen Molekülen. Auf Grund dieser Eigenschaften stehen poröse, silicatische Materialien seit etwa 10 Jahren im Focus der Entwicklung neuartiger Wirkstoffspeichersysteme (WSS). Die innerhalb dieser Thematik veröffentlichten wissenschaftlichen Arbeiten konnten die Fragestellungen nach dem exakten Mechanismus der Wirkstoffspeicherung und Wiederfreisetzung bisher nicht komplett beantworten. Die vorliegende Arbeit beschäftigt sich im Besonderen mit der Beladung und Abgabe des Lokalanästhetikum Lidocain-Hydrochlorid (LidHCl) in bekannten MSM wie SBA15, MCM41 oder HMS, sowie in unterschiedlich modifizierten Zeolithen vom Typ FAU und BEA. Zusätzlich wurde der Einfluss von organischen Ankergruppen innerhalb der Porenstruktur von SBA15 auf dessen Sorptions-eigenschaften hin untersucht. Ziel der Promotionsarbeit ist die Aufklärung des Speicher- und Freisetzungs-mechanismus dieses speziellen Speichersystems. Dazu wurden zunächst detaillierte Analysen der reinen und der mit Wirkstoff beladenen Matrizes via N2-Sorption (BET-, BJH-, t-plot-Methode), XRD, SAXS, DSC und TG durchgeführt. Außerdem wurden grafische Profile erstellt, die das Verhältnis der ad- bzw. desorbierten Wirkstoffmengen gegen die bei der Beladung eingesetzten Wirkstoffkonzentrationen (Speicherprofil) bzw. gegen die bei der Wiederfreisetzung verstrichene Zeit (Freisetzungsprofil) wiedergeben. Durch die Kombination dieser Untersuchungsmethoden konnte der jeweilige Sorptionsmechanismus, sowie der Speicherort der Wirkstoffmoleküle innerhalb der ausgewählten Matrix erfasst werden. Der Vergleich der verschiedenen, hier untersuchten Speichersysteme zeigt, dass neben der Porengröße, die Art der Adsorbens-Adsorbat-Wechselwirkung, aber auch die Stabilität der Porenstruktur einen großen Einfluss auf die Sorption von Molekülen nimmt. N2 - Mesoporous Silica Materials (MSM) and microporous zeolites show high inner surfaces and high storage capacities for the delivery of molecules. As a result of these characteristics porous silica materials are in the focus of new Drug Delivery Systems (DDS´s) for about ten years. Scientific work on this topic could not totally clarify the mechanism of drug delivery and drug release up to now. This work deals particularly with the storage and release of the local anesthetic lidocaine hydrochloride (LidHCl) both in well-known MSM like SBA15, MCM41 or HMS and in modified zeolite type FAU or BEA. In addition the influence of organic anchor groups in modified SBA15 on the sorption characteristic was examined. The aim of this PhD thesis is the clarification of the delivery mechanism of this special DDS. Initially detailed analysis of pure and drug-loaded matrices were done by N2 Sorption (BET-, BJH-, t-plot-method), XRD, SAXS, DSC and TGA. Furthermore graphic accounts illustrate the relationship between the adsorbed drug amount and the drug concentration used during the loading (sorption profile) or released drug amount and the elapsed time (release profile). Delivery mechanisms and sorption spots of the drug molecules inside the selected adsorbents were formulated by the combination of these characterization methods. The comparison of the used DDS´s shows in detail that the sorption of molecules in porous silicates is extra-ordinary influenced by pore size, drug-adsorbens interaction and pore structure stability of the matrix. KW - Silicate KW - Zeolith KW - Lidocain KW - Wirkstofffreisetzung KW - Mikroporosität KW - Freisetzungskinetik KW - Wirkstoffspeichersystem KW - Speicherprofil KW - Nanoporöser Stoff KW - Mesoporous Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-103848 ER -