TY - THES A1 - Dörfler, Rainer Michael Manfred T1 - Synthese, Charakterisierung und Reaktivität zinnverbrückter ansa-Halbsandwichkomplexe von Molybdän und Wolfram T1 - Synthesis, characterisation and reactivity of tin-bridged ansa-halfsandwich complexes of molybdenum and tungsten N2 - Im Rahmen dieser Arbeit wurden neuartige Distanna-ansa-Halbsandwichkomplexe mit Molybdän und Wolfram als Zentralmetallatome hergestellt und charakterisiert. Die chemischen Eigenschaften der Verbindungen wurden bestimmt, und ihr Verhalten bei Erwärmung und ihre Reaktivität gegenüber Gruppe 10-Komplexen und elementaren Chalkogenen untersucht. Als eine weitere Ausgangsverbindung wurde die dilithiierte Molybdänspezies Li[(η5-C5H4Li)(CO)3Mo] ∙ 4 THF in guten Ausbeuten dargestellt. Diese beiden hochreaktiven Verbindungen wurden durch Umsetzung mit (Me2NBBr)2 erfolgreich zur Darstellung der Diboranyl-Oxycarbin-Komplexe [M{κ1-CO-B(NMe2)-B(NMe2)-(η5-C5H4)}(CO)2] (M = W, Mo) verwendet, die jedoch nur eine geringe thermische Stabilität zeigten. Durch Reaktion mit [(Ph3P)2Pt(η2-C2H4)] konnte durch Komplexierung der W≡C-Dreifachbindung die Spannung des Moleküls signifikant reduziert und damit die µ-Diboranyl-Oxycarbin-verbrückte Platin-Komplexe [M{η1,μ-CO-B(NMe2)-B(NMe2)-(η5-C5H4)}(CO)2{Pt(PPh3)2}] (M = W, Mo) isoliert werden. Die Synthese von Distanna-ansa-Halbsandwichkomplexen mit tert-Butyl-Gruppen am Zinn führte über eine zweistufige Syntheseroute nicht zum Erfolg, obwohl mit der Synthese der Komplexe [(η5-C5H5)W{SnR2(CH2I)}(CO)3] geeignete Ausgangsverbindungen dargestellt werden konnten. Diese wurden jedoch durch die Reaktion der beiden dilithiierten Spezies mit tBu4Sn2Cl2 in guten Ausbeuten dargestellt. Beide Verbindungen wurden vollständig charakterisiert und kristallografisch untersucht. Die Verbindungen [{κ1-SntBu2-SntBu2(η5-C5H4)}M(CO)3] (M = W, Mo) zeichnen sich trotz enger Winkel innerhalb des Henkels als unter Schutzatmosphäre bemerkenswert stabile Verbindungen aus. Die an beiden Komplexen durchgeführten Polymerisationsversuche führten nicht zur erwünschten ringöffnenden Polymerisation (ROP), sondern zur Zersetzung der Verbindungen unter Spaltung der ansa-Brücke, was durch DSC- und thermogravimetrische Analyse bewiesen werden konnte. Die Reaktion mit vierfach homoleptisch koordinierten Nickel(0)-Komplexen führte selektiv zum Austausch des zur Stannylgruppe trans-ständigen Carbonylliganden durch einen Liganden der Nickelverbindung. Durch Umsetzungen mit elementaren Chalkogenen wurde jedoch gezeigt, dass der Austausch eines Carbonylliganden durch ein tert-Butylisonitril die Reaktivität im Hinblick auf eine Insertion in die Sn–Sn-Bindung entscheidend erhöht. Im Falle von drei Carbonylliganden am Zentralmetallatom war die Insertion nur für den Wolframkomplex möglich. Auf diese Weise konnten zahlreiche Insertionsprodukte dargestellt und vollständig charakterisiert werden. Die NMR-spektroskopischen Daten sowie die Strukturen im Festkörper beweisen den nahezu vollständigen Abbau der Ringspannung durch die dreiatomige Brücke. Bei Zugabe von [Pd(CNtBu)2] erfolgte spontan die Insertion in die SnSn-Bindung, wodurch die neuartigen 1,3-Distanna-2-Pallada-ansa-Halbsandwichkomplexe [{κ1-SntBu2-{Pd(CNtBu)2}-SntBu2(η5-C5H4)}M(R)(CO)2] synthetisiert wurden. Diese Reaktion ist die erste oxidative Addition einer Halbsandwichkomplex-ansa-Brücke an ein Gruppe 10-Übergangsmetall. Die Molekülstrukturen im Festkörper zeigen ein nahezu perfekt quadratisch-planares Palladiumzentrum, wodurch die Winkel innerhalb der ansa-Brücke an den Stannylgruppen bis auf fast 120° geweitet werden. Es wurde ebenfalls versucht, die Darstellung von ansa-Halbsandwichkomplexen durch die Kopplung bzw. die Verbrückung von Bis(stannyl)-Halbsandwichverbindungen zu erreichen. N2 - Within the scope of this work, novel Distanna-ansa-half sandwich complexes with molybdenum and tungsten as central metal atom could be prepared and characterized. The chemical properties of these compounds were investigated; their behavior upon warming and their reactivity towards complexes of Group 10 and elemental chalcogens were studied. The dilithiated molybdenum species Li[(η5-C5H4Li)(CO)3Mo] ∙ 4 THF could be synthesized in good yields. These highly reactive compounds could be successfully used for the preparation of the diboranyl oxycarbyne complexes [M{η1-CO-B(NMe2)-B(NMe2)-(η5-C5H4)}(CO)2] (M = W, Mo) upon treatment with (Me2NBBr)2 which showed poor thermal stability in solution. The stability could be increased through complexation of the W≡C triple bond upon reaction with [(Ph3P)2Pt(η2-C2H4)], which decreases the strain within the molecule and yields the µ-diboranyl oxycarbyne bridged platinum complexes [M{η1,μ-CO-B(NMe2)-B(NMe2)-(η5-C5H4)}(CO)2{Pt(PPh3)2}] (M = W, Mo). The synthesis of distanna-ansa-half sandwich complexes bearing tert-butyl at the tin atoms could not be realized via a two-step reaction pathway despite the preparation of the complexes [(η5-C5H5)W{SnR2(CH2I)}(CO)3] as ideal precursors. Nonetheless, these compounds could be obtained in good yields by reaction with tBu4Sn2Cl2. The compounds [{κ1-SntBu2-SntBu2(η5-C5H4)}M(CO)3] (M = W, Mo) were fully characterized by NMR spectroscopy and X-ray diffraction and showed remarkable stability under argon atmosphere despite acute angles within the bridge. Polymerization experiments with both complexes did not lead to the desired ring-opening polymerization (ROP), but to decomposition by cleavage of the ansa bridge, which could be proved by DSC and thermogravimetric analyses. The treatment with quaternary homoleptic coordinated nickel(0) species results in the selective exchange of the carbonyl trans to the stannyl group by a ligand of the nickel compound. Insertion reactions with elemental chalcogens show that the substitution of one carbonyl with a tert-butyl isonitrile ligand significantly enhances the reactivity towards insertion into the tin-tin bond, which is only possible in case of tungsten bearing three carbonyl ligands at the central metal atom. The NMR spectroscopic data and the solid structures obtained by X-ray crystallography show almost full depletion of the ring strain within the now triatomic bridge. Upon the addition of [Pd(CNtBu)2], an immediate insertion into the tin-tin bond occurs, from which the novel 1,3-distanna-2-pallada-ansa-half sandwich complexes [{κ1-SntBu2-{Pd(CNtBu)2}-SntBu2(η5-C5H4)}M(R)(CO)2] could be prepared. These are the first example of an oxidative addition by a half sandwich ansa-bridge to a Group 10 transition metal. The molecular structures of 100 and 101 show an almost perfect square planar palladium center, which evokes an enlargement of the angles at the stannyl groups within the bridge to almost 120°. Additionally, the formation of ansa-half sandwich complexes by reductive coupling or bridging of bis(stannyl) half sandwich complexes was attempted. KW - Halbsandwich-Verbindungen KW - Übergangsmetallkomplexe KW - Zinnverbindungen KW - Molybdän KW - Übergangsmetallkomplexe KW - Ligand KW - Koordinativ ungesättigte Verbindung KW - Zinn KW - Wolfram KW - ansa-Komplexe KW - oxidative Addition KW - tin KW - molybdenum KW - tungsten KW - ansa complexes KW - oxidative addition KW - transition metal Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53315 ER - TY - THES A1 - Mager, Julian T1 - Synthese, Struktur und Reaktivität neuer [n]Metallocenophane T1 - Synthesis, Structure and Reactivity of new [n]Metallocenophanes N2 - Das Ziel dieser Arbeit bestand in der Synthese und Charakterisierung neuer Metallocenophane mit Sila-, Bora- und Stannabrücken. Sowohl für die Synthese über 1,1'-dimetallierte Metallocene als auch für die Synthese über die sogenannte flytrap-Methode sind dihalogenierte Brücken erforderlich. Für die Synthese neuer Trisilametallocenophane wurde deshalb eine verbesserte Synthese für 1,3-Diphenyl- und 1,3-Dichlorotrisilane erarbeitet. Die für die flytrap-Methode benötigten Liganden konnten aus 1,3-Dichloro-2,2-diisopropyltrisilan durch die Umsetzung mit den lithiierten Ringsystemen Lithiumindenid, Lithiumfluorenid und Lithiumoctafluorenid erhalten werden. Die dadurch dargestellten, zweifach arylsubstituierten Trisilane konnten anschließend erfolgreich mit BuLi zweifach lithiiert werden Das für die Darstellung von Triborametallocenophanen benötigte 1,3-Dibromo-1,2,3-tris(dimethylamino)triboran(5) sowie dessen Vorstufe 1,1,2,3,3-Pentakis-(dimethylamino)triboran(5) wurde über die bekannte Syntheseroute von Nöth et al. dargestellt. Durch eine Verbesserung der Reaktionsbedingungen konnten die Ausbeuten von 23% auf 36% bzw. auf 71% erhöht werden. Außerdem wurde eine Einkristallröntgenstrukturanalyse erhalten. Metallocenophane der 8. Gruppe werden meist durch Reaktion der 1,1'-dilithiierten Metallocenene mit dihalogenierten Brücken dargestellt. Um die Synthese von Rutheno- und Osmocenophanen zu ermöglichen, wurden Ruthenocen und Osmocen mit BuLi und pmdta als Hilfsbase lithiiert und erstmals als Feststoffe isoliert. Diese wurden mittels NMR-Spektroskopie und Einkristallröntgenstrukturanalyse untersucht, wodurch gezeigt wurde, dass sie wie 1,1'-Dilithioferrocen und 1,1'-Dilithometalloarenophane im Feststoff als dimere Verbindungen vorliegen. Aus thf konnte zusätzlich die Einkristallröntgenstrukturanalyse des thf-stabilisierten 1,1'-Dilithioruthenocen-Dimers erhalten werden Mit den in dieser Arbeit synthetisierten 1,3-Dichlorotrisilanen und 1,1'-Dilithioferrocen wurden die entsprechenden Trisilaferrocenophane synthetisiert und mittels NMR-Spektroskopie untersucht. Von der iPropyl-substituierten Verbindung konnte zusätzlich die erste Einkristallröntgenstrukturanalyse eines Trisilaferrocenophans erhalten werden Durch eine Umsetzung von 1,1‘-Dilithioruthenocen und –osmocen mit dem Diisopropyltrisilan konnten die ersten Trisilametallocenophane von Ruthenium und Osmium dargestellt werden. Durch die Umsetzung von 1,1‘-Dilithioosmocen mit Tetramethyldichlorodisilan gelang die Darstellung des ersten Osmocenophans mit einer zweiatomigen Brücke. Von Tetramethyldisilaosmocenophan konnte eine Einkristallröntgenstrukturanalyse erhalten werden. Die Syntheseroute von Tetra-tert-butyldistannaferrocenophan von Braunschweig et al. konnte erfolgreich auf die Synthese der Ruthenium- und Osmiumanaloga übertragen werden. Die zinnverbrückten Metallocenophane konnten NMR-spektroskopisch und durch eine Einkristallröntgenstrukturanalyse charakterisiert werden. Die von Wrackmeyer et al. und Braunschweig et al. bekannte Insertion von Chalkogenen in die Zinn-Zinn-Bindung konnte ebenfalls für die Verbindungen gezeigt werden. Dabei konnte eine deutliche Verkürzung der Reaktionszeit von 10 d auf 1 d durch die Zugabe von einem Äquivalent pmdta zur Reaktionsmischung erreicht werden. Mit der Ligandenvorstufe 1,2-Bis(lithio-cyclopentadienid)-1,1,2,2-tetra-tert-butyldistannan konnten über die flytrap-Methode die Distannametallocenophane von Cobalt und Nickel synthetisiert werden. Zudem konnten beide Verbindungen mit Ferroceniumhexafluorophosphat einfach oxidiert werden. Die beiden 19-Valenzelektronenverbindungen wurden mittels ESR-Spektroskopie untersucht. Von beiden Cobaltocenophanen sowie vom Nickelocenophan konnte eine Einkristallröntgenstrukturanalyse erhalten werden. N2 - The aim of this work consisted in the synthesis and characterization of new metallocenophanes with sila-, bora-, and stanna-bridges. Dihalogenated bridges are necessary both for the synthesis via 1,1’-dimetalated metallocenes and for the synthesis via the so-called flytrap method. Therefore, the first step consisted in the development of an improved synthetic procedure for the synthesis of 1,3-diphenyl-, and 1,3-dichlorotrisilanes. The ligands necessary for the flytrap method were obtained by reacting 1,3-dichloro-2,2-diisoporpltrisilan with the lithiated ring systems lithium indenide, lithium fluorenide, and lithium octafluorenide. Subsequently, a twofold lithiation of these molecules was carried out successfully with BuLi. 1,3-Dibromo-1,2,3-tris(dimethylamino)triborane(5), which is necessary for the synthesis of triborametallocenophanes, and its precursor 1,1,2,3,3,-pentakis(dimethylamino)-triborane(5) were synthesised via the synthetic procedure of Nöth et al.. By adjusting the reaction parameters, the yields were improved from 23% to36% and to 71%. Additionally, a solid state structure was obtained. Metallocenophanes of group 8 are generally synthesised by reacting 1,1'-dilithiated metallocenes with dihalogenated bridges. To achieve the synthesis of ruthenocenophanes and osmocenophanes, ruthenocene and osmocene were lithiated with BuLi and pmdta and isolated for the first time as solids. These were analysed via NMR spectroscopy and molecular structure analysis. This showed that both are dimers in the solid state, similar to 1,1'-dilithioferrocene and 1,1'-dilithiometalloarenophane. Additionally, the solid state structure of the thf-stabilised 1,1'-dilithioruthenocene dimer was obtained. Using the trisilanes and 1,1’-dilithioferrocene, new trisilaferrocenophanes were synthesised and analysed via NMR spectroscopy. Additionally, the first example of a crystal structure analysis of a trisilaferrocenophane was obtained. By reacting 1,1’-dilithioruthenocene and -osmocene with diisopropyltrisilane, the first trisilametallocenophanes of ruthenium and osmium were obtained. The reaction of 1,1’-dilithioosmocene with Me4Si2Cl2 resulted in the first osmocenophane with a diatomic bridge Also, a crystal structure analysis was obtained. The earlier synthesis of tetra-tert-butyldistannaferrocenophane by Braunschweig et al. was successfully transferred to the synthesis of the ruthenium and osmium analogues. The tin-bridged metallocenophanes were characterised by NMR spectroscopy and molecular structure analysis. The insertion of chalcogens into the tin-tin bond, previously reported by Wrackmeyer et al. and Braunschweig et al. was also shown. By adding one equivalent of pmdta to the reaction mixture, the reaction time was shortened significantly from 10 d to less than1 d. Using the ligand precursor 1,2-bis(lithio-cyclopentadienide)-1,1,2,2-tetra-tert-butyldistannane and the flytrap method, the distannametallocenophanes of cobalt and nickel were synthesised. Additionally, both compounds were oxidised by one electron using ferrocenium hexafluorophosphate. The 19 valence electron compounds were analysed via ESR spectroscopy. Crystal structure analyses were obtained from both cobaltocenophanes as well as the nickelocenophane. KW - Metallocene KW - Cyclophane KW - Übergangsmetallorganische Verbindungen KW - Metallocenophane KW - Übergangsmetalle KW - ansa KW - Metallorganic KW - Osmium KW - Ruthenium KW - Esien KW - Cobalt KW - Nickel KW - Zinn KW - Silicium KW - Bor KW - Metallocenophanes KW - Transition Metals KW - ansa KW - metal organic Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78384 ER - TY - THES A1 - Dörrich, Steffen T1 - Synthese und Charakterisierung neuartiger Silicium-, Germanium- und zinnorganischer Riechstoffe T1 - Synthesis and characterization of novel Silicon-, Germanium- and tinorganic odorants N2 - Aufbauend auf dem Konzept der C/Si-Bioisosterie beschreibt die vorliegende Arbeit die Synthese und Charakterisierung siliciumhaltiger Derivate der Riechstoffe Galaxolide, Lilial, Bourgeonal, 5,7,7-Trimethyl-4-methylenoctanal und α-Galbanone sowie Beiträge zur Synthese eines silicium¬haltigen Derivats von δ-Damascone. Basierend auf der C/Ge- und C/Sn-Bioisosterie wurden zudem die Germa- und Stanna-Analoga von Lilial und Bourgeonal synthetisiert. Die entsprechenden Zielverbindungen sowie alle isolierten Zwischenstufen wurden durch NMR-Spektroskopie (1H, 11B, 13C, 15N, 29Si, 119Sn) und Elementaranalyse (C, H, N) charakterisiert. In einigen Fällen erfolgte zusätzlich eine Charakterisierung durch Einkristall-Röntgenstrukturanalyse oder Infrarot-Spektroskopie. N2 - Based on the concept of the C/Si bioisosterism, this doctoral thesis describes the syntheses and characterization of silicon-containing derivatives of the odorants galaxolide, lilial, bourgeonal, 5,7,7-trimethyl-4-methyleneoctanal, and α-galbanone as well as precursors to the synthesis of a silicon-containing derivative of δ-damascone. Based on the C/Ge and C/Sn bioisosterism, the germanium and tin analogues of lilial and bourgeonal were also synthesized. The identity of the respective target compounds and their isolated precursors was established by NMR spectroscopic studies (1H, 11B, 13C, 15N, 29Si, 119Sn) and elemental analyses (C, H, N). In some cases, an additional characterization by single-crystal X-ray diffraction or infrared spectroscopy was undertaken. KW - Silicium KW - Germanium KW - Zinn KW - Riechstoff KW - Siliciumorganische Verbindungen KW - Bioisosterie KW - bioisosterism KW - galaxolide KW - lilial KW - galbanone KW - damascone KW - bourgeonal KW - Sila-Substitution KW - C/Si-Austausch KW - Maiglöckchen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-94552 ER -