TY - THES A1 - Röger, Cornelia T1 - Bioinspired Light-Harvesting Zinc Chlorin Rod Aggregates Powered by Peripheral Chromophores T1 - Bioinspirierte lichtsammelnde Zinchlorin-Stabaggregate N2 - Artificial light-harvesting (LH) systems have been obtained by self-assembly of naphthalene diimide-functionalized zinc chlorin dyads and triad in nonpolar, aprotic solvents. UV-vis, CD, and steady-state emission spectroscopy as well as atomic force microscopy showed that rod-like structures are formed by excitonic interactions of zinc chlorin units, while the appended naphthalene diimide dyes do not aggregate at the periphery of the cylinders. In all cases, photoexcitation of the enveloping naphthalene diimides at 540 and 620 nm, respectively, was followed by highly efficient energy-transfer processes to the inner zinc chlorin backbone, as revealed by time-resolved fluorescence spectroscopy on the picosecond time-scale. As a consequence, the LH efficiencies of zinc chlorin rod aggregates were increased by up to 63%. The effective utilization of solar energy recommends these biomimetic systems for an application in electronic materials on the nanoscale. N2 - In der vorliegenden Arbeit werden selbstorganisierte Lichtsammelsysteme auf der Basis von Napthalinbisimid-funktionalisierten Zinkchlorinen beschrieben. KW - Farbstoff KW - Scheibe-Aggregat KW - Naphthalinbisimid KW - Chlorin KW - Selbstorganisation KW - Lichtsammelsystem KW - Energietransfer KW - naphthalene diimide KW - chlorin KW - self-assembly KW - light harvesting KW - energy transfer Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26760 ER - TY - THES A1 - Steeger, Markus T1 - Energy and Charge Transfer in Donor-Acceptor Substituted Hexaarylbenzenes T1 - Energie- und Ladungstransfer in Donor-Akzeptor-substituierten Hexaarylbenzolen N2 - The focus of this work was the investigation of energy transfer between charge transfer states. For this purpose the multidimensional chromophores HAB-S, HAB-A, B1 and B2 were synthesised, each consisting of three electron donor and three electron acceptor redox centres linked symmetrically or asymmetrically by the hexaarylbenzene framework. Triarylamines represent in all these compounds the electron donors, whereas the electron poor centres were triarylboranes in B1 and B2 and PCTM centres in HAB-S and HAB-A, respectively. The hexaarylbenzenes were obtained by cobalt catalysed cyclotrimerisation of the respective tolan precursors. In addition, Star was synthesised, which consists of a central PCTM linked to three triarylamin centres by tolan bridging units in a star-like configuration. The hexaarylbenzene S1a/b substituted with six squaraine chromophores could not be realised. It is assumed that the cyclotrimerisation catalyst Co2(CO)8 does not tolerate the essential hydroxyl groups in the tolan precursor S2a. The alternative reaction pathway to execute the cyclotrimerisation reaction first and introduce the hydroxyl groups thereafter failed as well, because the required hexaarylbenzene substituted by six semisquaric acid moieties could not be synthesised. However, energy transfer interactions could be investigated in the tolan precursor S2a with two squaraine units to obtain information about the electronic coupling provided by the tolan bridge. For all multidimensional compounds model molecules were synthesised with only a single donor-acceptor pair (B3, Star-Model and HAB-Model). This allows a separate consideration of energy and charge transfer processes. It has to be stressed that in all before mentioned multidimensional compounds the “through bond” energy transfer interaction between neighbouring IV-CT states is identical to a transfer of a single electron between two redox centres of the same kind (e.g. TAA -> TAA+). The latter can be analysed by electron transfer theory. This situation is observed when the two IV-CT states transferring energy share one redox centre. All compounds containing PCTM centres were characterised by paramagnetic resonance spectroscopy. Thereby, a weak interaction between the three PCTM units in HAB-S and HAB-A was observed. In addition, when oxidising Star-Model, a strongly interacting singlet or triplet state was obtained. In contrast, signals corresponding to a weakly interacting biradical were obtained for HAB-Model+. This indicates a strong electronic coupling between the redox centres provided by the tolan bridge and a weak coupling when linked by the hexaarylbenzene. This trend is supported by UV/Vis/NIR absorption measurements. The analysis of the observed IV-CT absorption bands by electron transfer theory reveals a weak electronic coupling of V = 340 cm-1 in HAB-Model and a distinctly stronger coupling of V = 1190-2900 cm-1 in Star-Model. In the oxidised HAB-S+, Star+ and Star-Model+ a charge transfer reversed from that of the neutral species, that is, from the PCTM radical to the electron poorer cationic TAA centre, was observed by spectroelectrochemistry. The temporal evolution of the excited states was monitored by ultrafast transient absorption measurements. Within the first picosecond stabilisation of the charge transfer state was observed, induced by solvent rotation. Anisotropic transient absorption measurements revealed that within the lifetime of the excited state (tau = 1-4 ps) energy transfer does not occur in the HABs whereas in the star-like system ultrafast and possibly coherent energy redistribution is observed. Taken this information together the identity between energy transfer and electron transfer in the specific systems were made apparent. It has to be remarked that neither energy transfer nor charge transfer theory can account for the very fast energy transfer in Star. The electrochemical and photophysical properties of B1 and B2 were investigated by cyclic voltammetry, absorption and fluorescence measurements and were compared to B3 with only one neighbouring donor-acceptor pair. For the asymmetric B2 CV measurements show three oxidations as well as three reduction peaks whose peak separation is greatly influenced by the conducting salt due to ion-pairing and shielding effects. Consequently, peak separations cannot be interpreted in terms of electronic couplings in the generated mixed valence species. Transient absorption, fluorescence solvatochromism and absorption spectra show that charge transfer states from the amine to the boron centres are generated after optical excitation. The electronic donor-acceptor interaction is weak though as the charge transfer has to occur predominantly through space. The electronic coupling could not be quantified as the CT absorption band is superimposed by pi-pi* transitions localised at the amine and borane centres. However, this trend is in good agreement to the weak coupling measured for HAB-Model. Both transient absorption and fluorescence upconversion measurements indicate an ultrafast stabilisation of the charge transfer state in B1- B3 similar to the corresponding observations in HAB-S and Star. Moreover, the excitation energy of the localised excited charge transfer states can be redistributed between the aryl substituents of these multidimensional chromophores within fluorescence lifetime (ca. 60 ns). This was proved by steady state fluorescence anisotropy measurements, which further indicate a symmetry breaking in the superficially symmetric HAB. Anisotropic fluorescence upconversion measurements confirm this finding and reveal a time constant of tau = 2-3 ps for the energy transfer in B1 and B2. It has to be stressed that, although the geometric structures of B1 and HAB-S are both based on the same framework and furthermore the neighbouring CT states show in both cases similar Coulomb couplings and negligible “through bond” couplings, very fast energy transfer is observed in B1 whereas in HAB-S the energy is not redistributed within the excited state lifetime. To explain this, it has to be kept in mind that the energy transfer and the relaxation of the CT state are competing processes. The latter is influenced moreover by the solvent viscosity. Hence, it is assumed that this discrepancy in energy transfer behaviour is caused by monitoring the excited state in solvents of varying viscosity. Adding fluoride ions causes the boron centres to lose their acceptor ability due to complexation. Consequently, the charge transfer character in the donor-acceptor chromophores vanishes which could be observed in both the absorption and fluorescence spectra. However, the fluoride sensor ability of the boron centre is influenced strongly by the moisture content of the solvent possibly due to hydrogen bonding of water to the fluoride anions. UV/Vis/NIR absorption measurements of S2a show a red-shift by 1800 cm-1 of the characteristic squarain band compared to the model compound S20. From exciton theory a Coulomb coupling of V = 410 cm-1 is calculated which cannot account for this strong spectral shift. Consequently, “through-bond” interactions have to contribute to the strong communication between the two squaraine chromophores in S2a. This is in accordance with the strong charge transfer coupling calculated for the tolan spacer in Star-Model. N2 - Ziel dieser Arbeit war die Untersuchung des Energietransfers zwischen Ladungstransfer-Zuständen in multidimensional Donor-Akzeptor Systemen. Zu diesem Zweck wurden die Chromophore HAB-S, HAB-A, B1 und B2 synthetisiert. Diese bestehen jeweils aus drei Elektronen-Donoren und Elektronen-Akzeptoren, die über das Hexaarylbenzol-Gerüst symmetrisch oder asymmetrisch verknüpft sind. Triarylamine stellen dabei die Elektronen-Donoren dar, während Triarylborane in B1 und B2 und PCTM-Zentren in HAB-S und HAB-A die Aufgabe der Elektronen-Akzeptoren übernehmen. Die Hexaarylbenzole konnten durch Cobalt-katalysierte Cyclotrimerisierung der entsprechenden Tolan-Vorstufen hergestellt werden. Zusätzlich wurde das multidimensionale Chromophor Star synthetisiert. Dieses besteht aus einem zentralen PCTM, welches über Tolan-Brückeneinheiten sternförmig mit drei Triarylamin Zentren verknüpft ist. Das Hexaarylbenzol S1a/b, das mit sechs Squarain Chromophoren substituiert ist, konnte nicht realisiert werden. Möglichweise werden die essentiellen Hydroxygruppen der Tolan-Vorstufe S2a nicht von dem Cyclotrimerisierungs-Katalysator Co2(CO)8 toleriert. Der alternative Reaktionsweg, die Cyclotrimerisierung zuerst durchzuführen und anschließend die Hydroxygruppen einzuführen, schlug ebenfalls fehl. Grund dafür war, dass das Hexaarylbenzol, welches mit sechs Quadratsäure-Einheiten substituiert ist, nicht synthetisiert werden konnte. Nichtsdestotrotz konnten Energietransfer Wechselwirkungen in der Tolan-Vorstufe S2a untersucht werden. Dabei konnte die elektronische Kopplung zwischen den zwei Squarain-Zentren charakterisiert werden. Zu allen multidimensionalen Verbindungen wurden zusätzlich Modelverbindungen mit nur einem einzelnen Donor-Akzeptor-Paar hergestellt (B3, Star-Model und HAB-Model). Dadurch konnten die Energie- und Ladungstransferprozesse getrennt betrachten werden. Es soll noch angemerkt werden, dass in allen genannten multidimensionalen Verbindungen der Energietransfer „über Bindungen“ zwischen zwei benachbarten IV-CT Zuständen identisch ist mit dem Transfer eines einzelnen Elektrons zwischen zwei gleichartigen Redoxzentren (z.B. TAA→TAA+). Diese Situation ist immer dann zu beobachten, wenn sich die zwei IV-CT Zustände, zwischen denen Energie übertragen wird, ein Redox-Zentrum teilen. Alle Verbindungen, die PCTM Zentren beinhalten, wurden durch Elektronenspinzresonanz Experimente charakterisiert. Dabei wurde eine schwache Wechselwirkung zwischen den drei PCTM Einheiten in HAB-S und HAB-A beobachtet. Durch die Oxidation von Star-Model konnten zudem stark wechselwirkende Singlett- bzw. Triplettzustände erhalten werden. Dagegen wurden für HAB-Model+∙ Signale beobachtet, die einem schwach wechselwirkendem Biradikal entsprechen. Das lässt darauf hindeuten, dass die Tolan-Brückeneinheit eine starke Kopplung zwischen den Redox-Zentren gewährleistet, während die Verknüpfung über das Hexaarylbenzol-Gerüst eine schwache Kopplung zur Folge hat. Dieser Trend wurde durch UV/Vis/NIR Absorptionsmessungen gestützt. Durch die Analyse der beobachteten IV-CT Absorptionsbanden mittels Elektronentransfer-Theorie konnte eine schwache Kopplung von V = 340 cm-1 in HAB-Model und eine deutlich stärkere Kopplung von V = 1190-2900 cm-1 in Star-Model ermittelt werden. In spektroelektrochemischen Untersuchungen wurde in den oxidierten Verbindungen HAB-S+, Star+ und Star-Model+, im Vergleich zu den neutralen Verbindungen, der Ladungstransfer in entgegengesetzter Richtung beobachtet. D.h. vom PCTM-Radikal zum elektronenärmeren, kationischen TAA-Zentrum. Die zeitliche Entwicklung der angeregten Zustände wurde mit transienter Absorptionsspektroskopie verfolgt. Innerhalb der ersten Pikosekunden konnte eine Stabiliserung des Ladungstransferzustands, verursacht durch Umorientierungen des Lösungsmittels, beobachtet werden. Anisotrope, transiente Absorptionsmessungen konnten zeigen, dass innerhalb der Lebenszeit des angeregten Zustands (τ = 1-4 ps) kein Energietransfer in den HABs stattfindet, während in dem sternförmigen System eine ultraschnelle und möglicherweise koherente Energieumverteilung beobachtet wurde. Letztendlich konnte klargestellt werden, dass Energietransfer und Ladungstransfer in diesen speziellen Systemen identisch sind. Jedoch konnte weder die Energie-, noch die Ladungstransfertheorie den sehr schnellen Energietransfer in Star erklären. Die elektrochemischen und photophysikalischen Eigenschaften von B1 und B2 wurden mittels Cyclovoltammetrie, Absorptions- und Fluoreszenzmessungen untersucht und mit B3 verglichen. Im Fall vom asymmetrischen B2 zeigten CV Messungen drei Oxidations- und drei Reduktionspeaks, wobei der Abstand zwischen den Peaks stark vom Leitsalz abhing. Dies lässt sich auf Ionenpaar und Abschirmungseffekte zurückführen. Folglich konnten die Abstände zwischen den Peaks nicht in Bezug auf elektronische Kopplungen in den erzeugten, gemischtvalenten Verbindungen interpretiert werden. Transiente Absorption, Fluoreszenz Solvatochromie sowie Absorptionsspektren zeigten, dass nach optischer Anregung Ladungstransferzustände vom Amin- zum Borzentrum bevölkert werden. Die elektronische Donor-Akzeptor Wechselwirkung war jedoch schwach, da der Ladungstransfer hauptsächlich über den Raum stattfindet. Die elektronische Kopplung konnte nicht quantifiziert werden, weil die CT Absorptionsbande von π-π* Übergängen, die an den Amin- und Borzentren lokalisiert sind, überlagert war. Der Trend ist jedoch in guter Übereinstimmung mit der schwachen Kopplung, die für HAB-Model gemessen wurde. Sowohl transiente Absorptions- wie auch Fluoreszenz-Aufkonversionsmessungen deuten auf eine ultraschnelle Stabilisierung des Ladungstransferzustandes in B1 - B3, ähnlich dem Verhalten von HAB-S und Star, hin. Des Weiteren kann die Anregungsenergie der lokalisierten, angeregten Ladungstransferzustände innerhalb der Fluoreszenzlebensdauer (ca. 60 ns) zwischen den Arylsubsituenten dieser multidimensionalen Chromophore umverteilt werden. Dies wurde mit stationären Fluoreszenz-Anisotropiemessungen bewiesen, die weiterhin einen Symmetriebruch im vermeintlich symmetrischen HAB andeuten. Anisotrope Fluoreszenz-Aufkonversionsmessungen bestätigten diese Schlussfolgerung und zeigten eine Zeitkonstante von τ = 2-3 ps für den Energietransfer in B1 und B2. Es soll darauf hingewiesen werden, dass obwohl die geometrischen Strukturen von B1 und HAB-S beide auf dem gleichen Grundgerüst basieren und weiterhin benachbarte CT Zustände in beiden Fällen ähnliche Coulomb Kopplungen und vernachlässigbare Kopplungen „über Bindungen“ aufweisen, in B1 ein sehr schneller Energietransfer beobachtet werden konnte, während in HAB-S die Anregungsenergie innerhalb der Fluoreszenzlebenszeit nicht umverteilt wird. Um dies zu erklären, muss berücksichtigt werden, dass Energietransfer und die Relaxation des CT Zustands konkurrierende Prozesse darstellen. Letzteres wird zudem von der Viskosität des Lösungsmittels beeinflusst. Demnach wird angenommen, dass der Unterschied im Ladungstransferverhalten auf die Verwendung von unterschiedlich viskosen Lösungsmitteln zurückzuführen ist. Wenn Fluorid-Ionen zugesetzt wurden, verloren die Borzentren auf Grund von Komplexierung die Akzeptoreigenschaften. Folglich ging der Ladungstransfercharakter in den Donor-Akzeptor-Verbindungen verloren, was mittels Absorptions- und Fluoreszenzspektroskopie verfolgt wurde. Die Fluorid-Sensor-Eigenschaften der Borzentren war jedoch stark vom Feuchtigkeitsgehalt des Lösungsmittels beeinflusst. Dies ist wahrscheinlich auf starke Wasserstoffbindungen zwischen Wasser Molekülen und Fluorid-Ionen zurückzuführen. UV/Vis/NIR Absorptionsmessungen von S2a zeigten im Vergleich zur Modelverbindung S20 eine Rotverschiebung der charakteristischen Squarain Bande um 1800 cm-1. Anhand der Excitonen-Theorie konnte eine Coulomb Kopplung von V = 410 cm-1 berechnet werden, die jedoch diese starke Verschiebung nicht erklären kann. Demnach müssen Wechselwirkungen „durch Bindungen“ mit zu dieser guten Kommunikation zwischen den beiden Squarain Chromophoren in S2a beitragen. Diese Annahme stimmt mit der starken Ladungstransfer Kopplung überein, die für die Tolan-Brücke in Star-Model berechnet wurde. KW - Energietransfer KW - Ladungstransfer KW - energy transfer KW - charge transfer KW - hexaarylbenzenes KW - Energietransfer KW - Ladungstransfer KW - Hexaarylbenzole Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112520 ER - TY - THES A1 - Spitznagel, Niko T1 - Energy transfer during molten fuel coolant interaction T1 - Energieübertragung während Schmelze-Wasser-Interaktion N2 - The contact of hot melt with liquid water - called Molten Fuel Coolant Interaction (MFCI) - can result in vivid explosions. Such explosions can occur in different scenarios: in steel or powerplants but also in volcanoes. Because of the possible dramatic consequences of such explosions an investigation of the explosion process is necessary. Fundamental basics of this process are already discovered and explained, such as the frame conditions for these explosions. It has been shown that energy transfer during an MFCI-process can be very high because of the transfer of thermal energy caused by positive feedback mechanisms. Up to now the influence of several varying parameters on the energy transfer and the explosions is not yet investigated sufficiently. An important parameter is the melt temperature, because the amount of possibly transferable energy depends on it. The investigation of this influence is the main aim of this work. Therefor metallic tin melt was used, because of its nearly constant thermal material properties in a wide temperature range. With tin melt research in the temperature range from 400 °C up to 1000 °C are possible. One important result is the lower temperature limit for vapor film stability in the experiments. For low melt temperatures up to about 600 °C the vapor film is so unstable that it already can collapse before the mechanical trigger. As expected the transferred thermal energy all in all increases with higher temperatures. Although this effect sometimes is superposed by other influences such as the premix of melt and water, the result is confirmed after a consequent filtering of the remaining influences. This trend is not only recognizable in the amount of transferred energy, but also in the fragmentation of melt or the vaporizing water. But also the other influences on MFCI-explosions showed interesting results in the frame of this work. To perform the experiments the installation and preparation of the experimental Setup in the laboratory were necessary. In order to compare the results to volcanism and to get a better investigation of the brittle fragmentation of melt additional runs with magmatic melt were made. In the results the thermal power during energy transfer could be estimated. Furthermore the model of “cooling fragments “ could be usefully applied. N2 - Das Zusammentreffen von heißer Schmelze mit flüssigem Wasser (Schmelze-Wasser-Interaktion) - auf Englisch Molten-Fuel-Coolant-Interaction (MFCI) - kann zu heftigen Explosionen führen. Diese Explosionen sind in verschiedenen Szenarien möglich: in Stahl- und Kraftwerken, aber auch bei Vulkanen. Wegen der möglichen dramatischen Folgen solcher Explosionen ist eine Erforschung dieser Explosionsvorgänge notwendig. Wesentliche Grundlagen, unter welchen Voraussetzungen Schmelze-Wasser-Interaktionen zu Explosionen führen können, und der Ablauf dieser Vorgänge wurden weitgehend erforscht. Wie diese Forschungen gezeigt haben, kann die übertragene Energie bei diesen Vorgängen wegen positiver Rückkopplungsprozesse sehr hoch sein. Bislang wurden aber noch nicht in ausreichendem Maß die Einflussparameter auf die Energieübertragung und damit auf die Explosionsheftigkeit geprüft. Ein wichtiger Parameter ist die Schmelzetemperatur, da von ihr abhängt, wie viel thermische Energie freigesetzt werden kann. Die Untersuchung des Einflusses dieses Parameters ist das Hauptziel der vorliegenden Arbeit. Hierfür wurde bei den meisten Versuchen metallische Zinnschmelze verwendet, da die Materialwerte von Zinn über einen weiten Temperaturbereich annähernd konstant sind, von denen die Wärmeübertragung abhängt. Mit dieser Zinnschmelze war die Untersuchung der Schmelzetemperatur im Bereich von 400 °C bis 1000 °C möglich. Ein wesentliches Ergebnis zeigt die Abhängigkeit der Dampffilmstabilität von der Schmelzetemepratur. Bei niedrigen Schmelzetemperaturen bis etwa 600 °C ist der Dampffilm so instabil, dass er in den Experimenten bereits vor einer mechanischen Erschütterung zusammenbrach, die zu seiner Zerstörung eingesetzt wurde. Wie erwartet ist zu erkennen, dass mit höherer Schmelzetemperatur grundsätzlich mehr Energie umgesetzt werden kann. Obwohl dieser Effekt von weiteren Einflüssen auf die Explosionsstärke unter bestimmten Umständen überdeckt werden kann, wird dieses Ergebnis nach einer konsequenten Filterung der übrigen Einflüsse bestätigt. Diese Tendenz ist nicht nur an den berechneten übertragenen Gesamtenergiemengen erkennbar, sondern auch an den einzelnen Effekten wie z. B. der Fragmentation oder der Wasserverdampfung. Aber auch die weiteren Einflüsse auf die Energieübertragung wie z. B. die Vorvermischung von Schmelze und Wasser zeigten im Rahmen dieser Arbeit und der durchgeführten Experimente interessante Ergebnisse. Um diese Versuche durchführen zu können, waren die Einrichtung und Vorbereitung einer Versuchsanlage erforderlich. Zum Vergleich mit dem Vulkanismus und zur besseren Untersuchung der Feinfragmentation während ärmeübertagung wurden Versuche mit magmatischer Schmelze durchgeführt. In den Ergebnissen konnten thermische Leistungen während der Schmelze-Wasser-Interaktion bestimmt werden. Außerdem konnte das aufgestellte Modell der “kühlenden Fragmente “ sinnvoll angewendet werden. KW - Vulkanologie KW - Geophysik KW - Thermodynamik KW - Statisktik KW - Explosion KW - Sprödbruch KW - brittle fragmentation KW - Temperatureinfluss KW - Vorvermischung KW - Energieübertragung KW - Rückkopplung KW - influence of temperature KW - premix KW - energy transfer KW - feedback Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142891 ER - TY - JOUR A1 - Ouyang, Guanghui A1 - Rühe, Jessica A1 - Zhang, Yang A1 - Lin, Mei-Jin A1 - Liu, Minghua A1 - Würthner, Frank T1 - Intramolecular Energy and Solvent-Dependent Chirality Transfer within a BINOL-Perylene Hetero-Cyclophane JF - Angewandte Chemie International Edition N2 - Multichromophoric macrocycles and cyclophanes are important supramolecular architectures for the elucidation of interchromophoric interactions originating from precise spatial organization. Herein, by combining an axially chiral binaphthol bisimide (BBI) and a bay-substituted conformationally labile twisted perylene bisimide (PBI) within a cyclophane of well-defined geometry, we report a chiral PBI hetero-cyclophane (BBI-PBI) that shows intramolecular energy and solvent-regulated chirality transfer from the BBI to the PBI subunit. Excellent spectral overlap and spatial arrangement of BBI and PBI lead to efficient excitation energy transfer and subsequent PBI emission with high quantum yield (80–98 %) in various solvents. In contrast, chirality transfer is strongly dependent on the respective solvent as revealed by circular dichroism (CD) spectroscopy. The combination of energy and chirality transfer affords a bright red circularly polarized luminescence (CPL) from the PBI chromophore by excitation of BBI. KW - chirality transfer KW - solvent effects KW - perylene bisimide KW - energy transfer KW - cyclophanes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-318818 VL - 61 IS - 31 ER - TY - THES A1 - Hippius, Catharina T1 - Multichromophoric Arrays of Perylene Bisimide Dyes - Synthesis and Optical Properties T1 - Multichromophore Perylenbisimidkaskaden - Synthese und optische Eigenschaften N2 - The present work deals with the synthesis and the investigation of the photophysical properties of covalently constructed calix[4]arene–perylene bisimide dye arrays containing various PBI units. The obtained conjugates are characterized with respect towards their application in a new, zigzag-type architecture of artificial light-harvesting systems. For this purpose, orange (core-unsubstituted), red (6,7,11,12-tert-butylphenoxy-functionalized) and green (1,7-pyrrolidino-substituted) perylene bisimide building blocks have been attached to the calix[4]arene scaffold. First, the monochromophoric reference systems have been studied, and second, the photophysical properties of a comprehensive series of newly synthesized, multichromophoric calix[4]arene–perylene bisimide conjugates showing efficient energy transfer processes between the individual dye subunits have been investigated. Furthermore, a series of bichromophoric compounds containing identical chromophoric units has been obtained. Towards this goal, a variety of spectroscopic techniques such as UV/vis absorption, steady state and time-resolved fluorescence emission, and femtosecond transient absorption spectroscopy as well as a spectrotemporal analysis of the obtained data has been applied. This work presents a new concept for an artificial light-harvesting system positioning the dye units by means of calix[4]arene spacers along a zigzag chain. The investigations start with the syntheses and optical properties of the monochromophoric building blocks and result in an elaborate study on the energy and electron transfer processes occurring after photoexcitation in a comprehensive series of multichromophoric calix[4]arene–perylene bisimide conjugates. Finally, the photophysical properties of a series of compounds containing each two identical PBI units are discussed. N2 - Die vorliegende Arbeit hat die Synthese und die Untersuchung der photophysikalischen Eigenschaften kovalent verknüpfter Calix[4]aren–Perylenbisimid(PBI)-Farbstoffkaskaden zum Thema, die verschiedenartige PBI-Chromophore enthalten. Dazu wurden orange (kernunsubstituierte), rote (6,7,11,12-tert-butylphenoxy-funktionalisierte) und grüne (1,7-pyrrolidino-substituierte) Perylenbisimid-Bausteine an ein Calix[4]arengerüst geknüpft. Zunächst wurden die monochromophoren Referenzverbindungen bezüglich ihrer photophysikalischen Eigenschaften untersucht. Im Anschluss daran wurde eine umfassende Serie von Calix[4]aren–Perylenbisimid-Farbstoffkaskaden hinsichtlich der nach Photoanregung im angeregten Zustand stattfindenden Prozesse charakterisiert. Die erhaltenen Kaskaden weisen hocheffiziente und gerichtete Energietransferprozesse zwischen den einzelnen Untereinheiten auf, deren Transferraten sich unter Annahme einer Zickzack-Anordnung der Chromophoreinheiten gemäß der Förstertheorie erklären lassen. Weiterhin wurde eine Serie von Farbstoffkaskaden, die jeweils zwei identische PBI-Chromophore enthalten, bezüglich ihrer photophysikalischen Eigenschaften untersucht. Zur Charakterisierung wurden jeweils verschiedene spektroskopische Techniken wie UV/vis-Absorptions-, stationäre und zeitaufgelöste Fluoreszenzemissions-, sowie femtosekundenzeitaufgelöste transiente Absorptionsspektroskopie herangezogen, sowie zusätzlich eine spektrotemporale Analyse der erhaltenen Daten durchgeführt. Die vorliegende Arbeit beschreibt eine neue Architektur von künstlichen Lichtsammelsystemen, deren wesentliches Merkmal eine zickzack-Anordnung der Chromophoreinheiten ist. Zunächst wurden die Synthese und die optischen Eigenschaften der monochromophoren Bausteine diskutiert, und anschließend die Energie- und Elektronentransferprozesse nach Photoanregung in einer umfangreichen Serie von multichromophoren Perylenbisimid–Calix[4]arenkaskaden untersucht. Abschließend wurden die photophysikalischen Eigenschaften einer Serie von Calix[4]aren–PBI-Konjugaten diskutiert, die jeweils zwei identische PBI Chromophore enthalten. KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Perylenbisimide KW - Farbstoffe/Pigmente KW - Calix[4]aren KW - transiente Absorption KW - FRET KW - Dyes/pigments KW - energy transfer KW - multichromophoric arrays KW - transient absorption spectroscopy KW - calix[4]arene Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24767 ER - TY - JOUR A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Zottnick, Sven H. A1 - Müller-Buschbaum, Klaus T1 - Post-synthetic shaping of porosity and crystal structure of Ln-Bipy-MOFs by thermal treatment JF - Molecules N2 - The reaction of anhydrous lanthanide chlorides together with 4,4'-bipyridine yields the MOFs \(^{2}\)\(_{∞}\)[Ln\(_{2}\)Cl\(_{6}\)(bipy)\(_{3}\)]*2bipy, with Ln = Pr-Yb, bipy = 4,4'-bipyridine, and \(^{3}\)\(_{∞}\)[La\(_{2}\)Cl\(_{6}\)(bipy)\(_{5}\)]*4bipy. Post-synthetic thermal treatment in combination with different vacuum conditions was successfully used to shape the porosity of the MOFs. In addition to the MOFs microporosity, a tuneable mesoporosity can be implemented depending on the treatment conditions as a surface morphological modification. Furthermore, thermal treatment without vacuum results in several identifiable crystalline high-temperature phases. Instead of collapse of the frameworks upon heating, further aggregation under release of bipy is observed. \(^{3}\)\(_{∞}\)[LaCl\(_{3}\)(bipy)] and \(^{2}\)\(_{∞}\)[Ln\(_{3}\)Cl\(_{9}\)(bipy)\(_{3}\)], with Ln = La, Pr, Sm, and \(^{1}\)\(_{∞}\)[Ho\(_{2}\)Cl\(_{6}\)(bipy)\(_{2}\)] were identified and characterized, which can also exhibit luminescence. Besides being released upon heating, the linker 4,4'-bipyridine can undergo activation of C-C bonding in ortho-position leading to the in-situ formation of 4,4':2',2 '':4 '',4'''-quaterpyridine (qtpy). qtpy can thereby function as linker itself, as shown for the formation of the network \(^{2}\)\(_{∞}\)[Gd\(_{2}\)Cl\(_{6}\)(qtpy)\(_{2}\)(bipy)\(_{2}\)]*bipy. Altogether, the manuscript elaborates the influence of thermal treatment beyond the usual activation procedures reported for MOFs. KW - energy transfer KW - ligand KW - Ln-MOFs KW - luminescence crystal structure KW - metal-organic frameworks KW - shaping of porosity KW - thermal treatment KW - luminescence KW - crystal scructure KW - coordination polymers KW - solid state Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148404 VL - 20 ER -