TY - JOUR A1 - Wolter, Steffen A1 - Aizezers, Janis A1 - Fennel, Franziska A1 - Seidel, Marcus A1 - Würthner, Frank A1 - Kühn, Oliver A1 - Lochbrunner, Stefan T1 - Size-dependent exciton dynamics in one-dimensional perylene bisimide aggregates JF - New Journal of Physics N2 - The size-dependent exciton dynamics of one-dimensional aggregates of substituted perylene bisimides are studied by ultrafast transient absorption spectroscopy and kinetic Monte-Carlo simulations as a function of the excitation density and the temperature in the range of 25-90 degrees C. For low temperatures, the aggregates can be treated as infinite chains and the dynamics is dominated by diffusion-driven exciton-exciton annihilation. With increasing temperature the aggregates dissociate into small fragments consisting of very few monomers. This scenario is also supported by the time-dependent anisotropy deduced from polarization-dependent experiments. KW - rotational diffusion KW - spectroscopy KW - dyes KW - annihilation KW - migration KW - films Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-135190 VL - 14 IS - 105027 ER - TY - JOUR A1 - Schmidt, David A1 - Stolte, Matthias A1 - Süß, Jasmin A1 - Liess, Dr. Andreas A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Protein-like enwrapped perylene bisimide chromophore as bright microcrystalline emitter material JF - Angewandte Chemie International Edition N2 - Strongly emissive solid‐state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer‐like absorption and emission profiles as well as fluorescence quantum yields over 90 % in its crystalline solid state. The material was synthesized by attaching two bulky tris(4‐tert‐butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments. KW - cristal engeneering KW - dyes KW - flourescence quantum yield KW - perylene bisimides KW - solid-state emitters Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204809 VL - 58 IS - 38 ER - TY - THES A1 - Osswald, Peter Uwe T1 - Perylene Bisimide Atropisomers : Synthesis and Optical and Chiroptical Properties T1 - Perylenbisimid Atropisomere: Synthese, Optische und Chiroptische Eigenschaften N2 - Zur Herstellung von atropo-enantiomeren Perylenbisimiden wurde die kovalente Verknüpfung von Aryloxysubstituenten durch Makrocyclisierung eingesetzt. Die Darstellung makrocyclischer Perylenbisimide erfolgte ausgehend von einem vierfach (3-Hydroxyphenoxy)-funktionalisierten Perylenbisimid mit achiralen 2,6-Diisopropylphenylsubstituenten an den Imidpositionen durch Williamsonsche Ethersynthese. Die Synthese konnte für vier unterschiedliche Oligoethylenglykol-Kettenlängen realisiert werden, wobei für jede Brückenlänge jeweils zwei regioisomere Makrocyclen, nämlich das diagonal verbrückte (1,7- und 6,12-Verküpfung) und das seitlich verbrückte Isomer (1,12- und 6,7- Verknüpfung), isoliert werden konnten. Die strukturelle Zuordnung der isolierten Makrocyclen zu einem der beiden Regioisomeren gelang zweifelsfrei anhand von Röntgenstrukturanalysen für zwei Makrocyclen und 1H NMR-Spektroskopie für alle Isomere. Der konformative Einfluß der Aryloxy-Substituenten auf die funktionenellen Eigenschaften dieser Farbstoffklasse konnte durch Vergleich der optischen und elektrochemischen Eigenschaften aller isolierter Makrocyclen mit einer offenkettigen Referenzverbindung abgeleitet werden. Hierbei zeigte sich, dass die Aryloxy-Substituenten dieser Farbstoffe in Lösung bevorzugt in einer horizontalen Konformation vorliegen. Durch lösungsmittelabhängige Fluoreszenzmessungen konnte gezeigt werden, dass ein photoinduzierter Elektronentransferprozess für die Fluoreszenzlösung elektronenreicher Aryloxy-Substituenten von Bedeutung ist. Die Trennung der Atropo-Diastereomere konnte für eine diagonal überbrückte makrocyclische Verbindung mit chiralen 2-(R)-Octylamin Imidsubstituenten und Diethyleneglykol als Brückenkette mittels semi-preparativer HPLC an einer chiralen stationären Phase realisiert werden. Die chiroptischen Eigenschaften der isolierten epimerenreinen Makrocyclen wurden mittels CD-Spektroskopie untersucht. Die Zuordnung der absoluten Stereochemie konnte anhand der erhaltenen CD-Spektren durch Anwendung der „Theorie der excitonischen Kopplung“ abgeleitet und durch quantenchemische Berechnung der CD-Spektren bestätigt werden. Dieses Synthesekonzept wurde auf 1,7-diaryloxy-substituierten Perylenbisimide erweitert. Die Struktur der erhaltenen diagonal verbrückten monocyclischen Verbindung konnte erneut durch NMR-Spektroskopie und Röntgenstrukturanalyse eindeutig bestimmt werden. Die Trennung der Atropo-Enantiomere gelang mittels semi-preparativer HPLC an einer chiralen stationären Phase. Die Zuordnung der Stereochemie konnte anhand des Vergleichs der CD-Spektren mit den zuvor für epimerenreine Bismakrocyclen erhaltenen CD-Spektren realisiert werden. Anhand der Röntgenstrukturanalysen sowohl der racemischen Mischung als auch eines Atropo-Enantiomers ließen sich bedeutende Informationen über die p-Dimerisierung von Perylenbisimiden ableiten. Die Abhängigkeit der Razemisierungsbarriere von der Größe der Bay-Substituenten wurde für vier halogensubstituierte Derivate untersucht. Die dynamischen Eigenschaften wurden mittels temperaturabhängiger NMR-Spektroskopie und kinetischer Messungen mittels CD-Spektroskopie bestimmt. Unter Anwendung des „Apparent Overlap“-Konzeptes konnte eine überzeugende lineare Beziehung zwischen der Größe der Substituenten und der Inversionsbarriere hergestellt werden. Darüber hinaus war es möglich die Atropo-Diastereomere bzw. Enantiomere der tetrachlor- und tetrabrom-substituierten Derivate zu trennen, wobei vor allem das 1,6,7,12-tetrabrom-substituierte Perylenbisimid stabile Enantiomere bei Raumtemperatur lieferte. Die abgeleitete Struktur-Eigenschaftsbeziehung sollte zukünftig die Herstellung von stabilen Enantiomeren durch geeignete Wahl der Substituenten in den Bay-Positionen ermöglichen. Um die Reversibilität der Selbstorganisation zur quantitativen Synthese makrocyclischer Perylenbisimide ausnützen zu können, wurde ein tetra(zinkporphyrin)-funktionalisiertes Perylenbisimid synthetisiert. Die Ausbildung des angestrebten 1:2-Sandwichkomplexes aus Tetra-Zinkporphyrin-Perylenbisimid und Diazabicyclo-[2.2.2]-undecan wurde mittels UV/Vis und 1H NMR Spektroskopie untersucht und die makrocyclische Struktur des Komplexes konnte mittels diffusionsabhängiger NMR Spektroskopie (DOSY NMR) eindeutig bewiesen werden. Weiterhin konnte mittels rasterkraftmikroskopischer (AFM) Untersuchungen gezeigt werden, dass diese funktionellen makrocyclischen Verbindungen sehr geordnet auf einer Graphitoberfläche (HOPG) abgeschieden werden können. Die Ausrichtung eines amino-funktionalsierten p-konjugierten Polymers durch Zugabe des bichromphoren Tetra-Zinkporphyrin-Perlyenbisimids wurde mittels UV/Vis-Spektroskopie und AFM-Messungen untersucht. Die Oberflächenanalyse mittels AFM zeigte, dass die bichromophore Verbindung die linearen p-konjugierten Polymere über weite Teile der Oberfläche auszurichten vermag, so dass eine definierte Anordnung von drei p-Systemen auf der Graphitoberfläche ermöglicht wurde. N2 - The covalent linkage of the aryloxy-substituents through macrocyclisation was applied for the synthesis of perylene bisimide atropo-enantiomers. The synthesis of macrocyclic perylene bisimides was achieved by using a tetra(3-hydroxyphenoxy)-functionalized perylene bisimide with achiral 2,6-diisopropylphenyl as imide substituent through Williamson´s etherfication which could be realized for four different oligoethylene glycol bridging units. Two regioisomeric macrocycles, namely the diagonally bridged (1,7- and 6,12- linkage) and the laterally bridged (1,12- and 6,7-linkage) isomers, were obtained for each bridging unit. The structural assignment of the isolated regioisomeric macrocycles was unambiguously accomplished by X-ray analysis of two macrocycles and by 1H NMR spectroscopy for all isomers. The conformational influence of the aryloxy-substituents on the functional properties of this class of chromophores could be derived by comparison of the optical and electrochemical properties of all isolated macrocylces with those of an open-chained reference compound. It was shown that the aryloxy-substituents prefer a lateral conformation in solution. Furthermore, solvent dependent fluorescence studies indicated that a photoinduced electron transfer process is of importance for the fluorescence quenching of electron-rich aryloxy-substituted perylene bisimides. The resolution of the atropo-diastereomers of diagonally bridged macrocyclic perylene bisimides with chiral 2-(R)-octylamine as imide substituent and diethylene glycol bridging units could be accomplished by semi-preparative HPLC on a chiral column. The chiroptical properties of the isolated epimerically pure macrocycles were determined by CD spectroscopy. Based on the experimental CD spectra, the stereochemical assignment of the isolated epimers was accomplished by application of the excition chirality method and confirmed by quantum chemical calculation of the CD spectra. The synthetical concept was extended successfully to 1,7-diaryloxy-substituted perylene bisimides. The structure of the diagonally bridged macrocycle was unambiguously confirmed by X-ray analysis and NMR spectroscopy. The atropo-enantiomers of this macrocycle could be resolved by semi-preparative HPLC on a chiral column and the assignment of the absolute configuration was achieved by comparison of the CD spectra of the resolved enantiomers with those of epimerically pure bis(macrocycles) reported before. By comparison of the X-ray structures obtained for the racemic mixture as well as one enantiomer important information could be extracted for the formation of p-dimers of perylene bisimides. The dependence of the interconversion barrier on the bulkiness of the bay-substituents was investigated for four halogen-substituted perylene bisimides. The dynamic properties were investigated by temperature-dependent NMR spectroscopy and kinectic measurements using CD spectroscopy. By applying the concept of the “apparent overlap” a convincing linear relationship between the size of the substituents and the free enthalpy of activation could be derived. Furthermore, the resolution of the atropo-diastereomers or enantiomers of the tetrachloro and tetrabromo-substituted derivates was accomplished, whereupon especially the 1,6,7,12-tetrabromosubstituted perylene bisimide provided at room temperature stable enantiomers. Additionally, the derived structure-property relationship allows the design of conformationally stable perylene bisimide enantiomers by proper choice of the bay substituents. In order to utilize the reversibility of self-assembly for the quantitative formation of macrocyclic perylene bisimides, a tetrazinc porphyrin-functionalized perylene bisimide was synthesized. The self-assembly of the zinc porphyrin perylene bisimide bichromophoric building block and diazabicyclo-[2.2.2]-undecane into the desired 1:2 sandwich complex was investigated by UV/Vis and 1H NMR spectroscopy and the macrocyclic structure was unequivocally proven by diffusion-ordered NMR spectroscopy (DOSY NMR). Furthermore, the controlled deposition of these well-defined macrocycles on highly ordered pyrolitic graphite (HOPG) was demonstrated by atomic force microscopy (AFM) investigations. The alignment of a linear amino functionalised p-conjugated polymers upon addition of the bichromphoric tetrazinc porphyrin-perylene bisimide was investigated by UV/Vis spectroscopy and AFM measurement. The surface analysis by AFM investigations revealed that the bichromophoric system composed of perylene bisimide and zinc porphyrin is able to cross-link the linear p-conjugated polymer over a wide range of the graphite surface which provided a defined arrangement of three different functional p-systems. KW - Farbstoffe KW - Perylenbisimid KW - Atropisomere KW - optische Eigenschaften KW - dyes KW - perylene bisimide KW - atropisomer KW - optical properties Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23248 ER - TY - JOUR A1 - Mahl, Magnus A1 - Shoyama, Kazutaka A1 - Krause, Ana‐Maria A1 - Schmidt, David A1 - Würthner, Frank T1 - Base‐Assisted Imidization: A Synthetic Method for the Introduction of Bulky Imide Substituents to Control Packing and Optical Properties of Naphthalene and Perylene Imides JF - Angewandte Chemie International Edition N2 - We report the direct imidization of naphthalene and perylene dicarboxylic anhydrides/esters with bulky ortho,ortho‐diaryl‐ and ortho,ortho‐dialkynylaniline derivatives. This imidization method uses n‐butyllithium as a strong base to increase the reactivity of bulky amine derivatives, proceeds under mild reaction conditions, requires only stoichiometric amounts of reactants and gives straightforward access to new sterically crowded rylene dicarboximides. Mechanistic investigations suggest an isoimide as intermediary product, which was converted to the corresponding imide upon addition of an aqueous base. Single‐crystal X‐ray diffraction analyses reveal dimeric packing motifs for monoimides, while two‐side shielded bisimides crystallize in isolated molecules without close π–π‐interactions. Spectroscopic investigations disclose the influence of the bulky substituents on the optical properties in the solid state. KW - dyes KW - fluorescence KW - imidization KW - perylene imide KW - solid-state emitters Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-218246 VL - 59 IS - 32 SP - 13401 EP - 13405 ER - TY - JOUR A1 - Görl, Daniel A1 - Zhang, Xin A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Supramolecular block copolymers by kinetically controlled co-self-assembly of planar and core-twisted perylene bisimides JF - Nature Communications N2 - New synthetic methodologies for the formation of block copolymers have revolutionized polymer science within the last two decades. However, the formation of supramolecular block copolymers composed of alternating sequences of larger block segments has not been realized yet. Here we show by transmission electron microscopy (TEM), 2D NMR and optical spectroscopy that two different perylene bisimide dyes bearing either a flat (A) or a twisted (B) core self-assemble in water into supramolecular block copolymers with an alternating sequence of (A\(_{m}\)BB)\(_{n}\). The highly defined ultralong nanowire structure of these supramolecular copolymers is entirely different from those formed upon self-assembly of the individual counterparts, that is, stiff nanorods (A) and irregular nanoworms (B), respectively. Our studies further reveal that the as-formed supramolecular block copolymer constitutes a kinetic self-assembly product that transforms into thermodynamically more stable self-sorted homopolymers upon heating. KW - cylindrical micelles KW - water KW - amplification KW - association KW - emission KW - organization KW - polymerization KW - dyes KW - fluorescent KW - aqueous medium Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-148657 VL - 6 IS - 7009 ER - TY - JOUR A1 - Grande, Vincenzo A1 - Soberats, Bartolome A1 - Herbst, Stefanie A1 - Stepanenko, Vladimir A1 - Würthner, Frank T1 - Hydrogen-bonded perylene bisimide J-aggregate aqua material N2 - A new twelvefold methoxy-triethyleneglycol-jacketed tetraphenoxy-perylene bisimide (MEG-PBI) amphiphile was synthesized that self-assembles into two types of supramolecular aggregates in water: red-coloured aggregates of low order and with weak exciton coupling among the PBIs and blue-coloured strongly coupled J-aggregates consisting of a highly ordered hydrogen-bonded triple helix of PBIs. At room temperature this PBI is miscible with water at any proportions which enables the development of robust dye aggregates in solution, in hydrogel states and in lyotropic liquid crystalline states. In the presence of 60–95 wt% water, self-standing coloured hydrogels exhibit colour changes from red to blue accompanied by a fluorescence light-up in the far-red region upon heating in the range of 30–50 °C. This phenomenon is triggered by an entropically driven temperature-induced hydrogen-bond-directed slipped stacking arrangement of the MEG-PBI chromophores within structurally well-defined J-aggregates. This versatile aqua material is the first example of a stable PBI J-aggregate in water. We anticipate that this study will open a new avenue for the development of biocompatible functional materials based on self-assembled dyes and inspire the construction of other hydrogen-bonded supramolecular materials in the highly competitive solvent water. KW - self-assembly KW - dyes KW - aqua material Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204715 UR - https://doi.org/10.1039/C8SC02409J SN - 2041-6539 VL - 9 ER -