TY - JOUR A1 - Pham, Mirko A1 - Helluy, Xavier A1 - Kleinschnitz, Christoph A1 - Kraft, Peter A1 - Bartsch, Andreas J. A1 - Jakob, Peter A1 - Nieswandt, Bernhard A1 - Bendszus, Martin A1 - Guido, Stoll T1 - Sustained Reperfusion after Blockade of Glycoprotein-Receptor-Ib in Focal Cerebral Ischemia: An MRI Study at 17.6 Tesla JF - PLoS ONE N2 - Background: Inhibition of early platelet adhesion by blockade of glycoprotein-IB (GPIb) protects mice from ischemic stroke. To elucidate underlying mechanisms in-vivo, infarct development was followed by ultra-high field MRI at 17.6 Tesla. Methods: Cerebral infarction was induced by transient-middle-cerebral-artery-occlusion (tMCAO) for 1 hour in C57/BL6 control mice (N = 10) and mice treated with 100 mg Fab-fragments of the GPIb blocking antibody p0p/B 1 h after tMCAO (N = 10). To control for the effect of reperfusion, additional mice underwent permanent occlusion and received anti-GPIb treatment (N = 6; pMCAO) or remained without treatment (N = 3; pMCAO). MRI 2 h and 24 h after MCAO measured cerebral-blood-flow (CBF) by continuous arterial-spin labelling, the apparent-diffusion-coefficient (ADC), quantitative-T2 and T2-weighted imaging. All images were registered to a standard mouse brain MRI atlas and statistically analysed voxel-wise, and by cortico-subcortical ROI analysis. Results: Anti-GPIb treatment led to a relative increase of postischemic CBF vs. controls in the cortical territory of the MCA (2 h: 44.2 +/- 6.9 ml/100g/min versus 24 h: 60.5 +/- 8.4; p = 0.0012, F((1,18)) = 14.63) after tMCAO. Subcortical CBF 2 h after tMCAO was higher in anti-GPIb treated animals (45.3 +/- 5.9 vs. controls: 33.6 +/- 4.3; p = 0.04). In both regions, CBF findings were clearly related to a lower probability of infarction (Cortex/Subcortex of treated group: 35%/65% vs. controls: 95%/100%) and improved quantitative-T2 and ADC. After pMCAO, anti-GPIb treated mice developed similar infarcts preceded by severe irreversible hypoperfusion as controls after tMCAO indicating dependency of stroke protection on reperfusion. Conclusion: Blockade of platelet adhesion by anti-GPIb-Fab-fragments results in substantially improved CBF early during reperfusion. This finding was in exact spatial correspondence with the prevention of cerebral infarction and indicates in-vivo an increased patency of the microcirculation. Thus, progression of infarction during early ischemia and reperfusion can be mitigated by anti-platelet treatment. KW - Von-Willebrand-factor KW - Experimental stroke KW - Magnetic-resonance KW - Arterial water KW - Brain KW - Perfusion KW - Mice KW - Inflammation KW - Coefficient KW - mechanisms Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142608 VL - 6 IS - 4 ER - TY - JOUR T1 - Measurement of the inelastic proton–proton cross-section at √s=7 TeV with the ATLAS detector JF - Nature Communications N2 - The dependence of the rate of proton–proton interactions on the centre-of-mass collision energy, √s, is of fundamental importance for both hadron collider physics and particle astrophysics. The dependence cannot yet be calculated from first principles; therefore, experimental measurements are needed. Here we present the first measurement of the inelastic proton–proton interaction cross-section at a centre-of-mass energy, √s, of 7 TeV using the ATLAS detector at the Large Hadron Collider. Events are selected by requiring hits on scintillation counters mounted in the forward region of the detector. An inelastic cross-section of 60.3±2.1 mb is measured for ξ>5×10−6, where ξ is calculated from the invariant mass, MX, of hadrons selected using the largest rapidity gap in the event. For diffractive events, this corresponds to requiring at least one of the dissociation masses to be larger than 15.7 GeV. KW - Physical Sciences KW - Particle physics Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140960 VL - 2 ER - TY - JOUR A1 - Yilmaz, Ali A1 - Rösch, Sabine A1 - Klingel, Karin A1 - Kandolf, Reinhard A1 - Helluy, Xavier A1 - Hiller, Karl-Heinz A1 - Jakob, Peter M A1 - Sechtem, Udo T1 - Molecular magnetic resonance imaging (MRI) of inflamed myocardium using ferucarbotran in patients with acute myocardial infarction JF - Journal of Cardiovascular Magnetic Resonance N2 - Introduction: Superparamagnetic iron oxide nanoparticle (SPIO)-based molecular imaging agents targeting macrophages have been developed and successfully applied in animal models of myocardial infarction. KW - Acute Myocardial Infarction KW - Cardiovascular Magnetic Resonance KW - Iron Oxide Nanoparticle KW - Superparamagnetic Iron Oxide KW - Infarct Zone Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140991 VL - 13 IS - Suppl. 1 ER - TY - JOUR A1 - Borisjuk, Ljudmilla A1 - Rolletschek, Hardy A1 - Fuchs, Johannes A1 - Melkus, Gerd A1 - Neuberger, Thomas T1 - Low and High Field Magnetic Resonance for \(in\) \(Vivo\) Analysis of Seeds JF - Materials N2 - Low field NMR has been successfully used for the evaluation of seed composition and quality, but largely only in crop species. We show here that 1.5T NMR provides a reliable means for analysing the seed lipid fraction present in a wide range of species, where both the seed size and lipid concentration differed by >10 fold. Little use of high field NMR has been made in seed research to date, even though it potentially offers many opportunities for studying seed development, metabolism and storage. Here we demonstrate how 17.5T and 20T NMR can be applied to image seed structure, and analyse lipid and metabolite distribution. We suggest that further technical developments in NMR/MRI will facilitate significant advances in our understanding of seed biology. KW - Time-domain NMR KW - H-1-NMR spectroscopy KW - Soybean seeds KW - Human brain KW - Oil KW - Storage KW - Plants KW - Deterioration KW - Transport KW - Gradients KW - NMR KW - MRI KW - seed quality KW - Crop seed KW - lipid imaging KW - sucrose allocation KW - seed aging KW - (13)C Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140910 VL - 4 IS - 8 ER - TY - JOUR A1 - Hill, Philip J. A1 - Stritzker, Jochen A1 - Scadeng, Miriam A1 - Geissinger, Ulrike A1 - Haddad, Daniel A1 - Basse-Lüsebrink, Thomas C. A1 - Gbureck, Uwe A1 - Jakob, Peter A1 - Szalay, Aladar A. T1 - Magnetic Resonance Imaging of Tumors Colonized with Bacterial Ferritin-Expressing \(Escherichia\) \(coli\) JF - PLoS ONE N2 - Background: Recent studies have shown that human ferritin can be used as a reporter of gene expression for magnetic resonance imaging (MRI). Bacteria also encode three classes of ferritin-type molecules with iron accumulation properties. Methods and Findings: Here, we investigated whether these bacterial ferritins can also be used as MRI reporter genes and which of the bacterial ferritins is the most suitable reporter. Bacterial ferritins were overexpressed in probiotic E. coli Nissle 1917. Cultures of these bacteria were analyzed and those generating highest MRI contrast were further investigated in tumor bearing mice. Among members of three classes of bacterial ferritin tested, bacterioferritin showed the most promise as a reporter gene. Although all three proteins accumulated similar amounts of iron when overexpressed individually, bacterioferritin showed the highest contrast change. By site-directed mutagenesis we also show that the heme iron, a unique part of the bacterioferritin molecule, is not critical for MRI contrast change. Tumor-specific induction of bacterioferritin-expression in colonized tumors resulted in contrast changes within the bacteria-colonized tumors. Conclusions: Our data suggest that colonization and gene expression by live vectors expressing bacterioferritin can be monitored by MRI due to contrast changes. KW - Blood-brain barrier KW - Gene-expression KW - Salmonella-typhimurium KW - Sugar-transport KW - Breast-tumors KW - MRI reporter KW - Iron-uptake KW - Proteins KW - Therapy KW - Mice Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140920 VL - 6 IS - 10 ER - TY - JOUR A1 - Hertlein, Tobias A1 - Sturm, Volker A1 - Kircher, Stefan A1 - Basse-Lüsebrink, Thomas A1 - Haddad, Daniel A1 - Ohlsen, Knut A1 - Jakob, Peter T1 - Visualization of Abscess Formation in a Murine Thigh Infection Model of \(Staphylococcus\) \(aureus\) by (19)F-Magnetic Resonance Imaging (MRI) JF - PLoS ONE N2 - Background: During the last years, (19)F-MRI and perfluorocarbon nanoemulsion (PFC) emerged as a powerful contrast agent methodology to track cells and to visualize inflammation. We applied this new modality to visualize deep tissue abscesses during acute and chronic phase of inflammation caused by Staphylococcus aureus infection. Methodology and Principal Findings: In this study, a murine thigh infection model was used to induce abscess formation and PFC or CLIO (cross linked ironoxides) was administered during acute or chronic phase of inflammation. 24 h after inoculation, the contrast agent accumulation was imaged at the site of infection by MRI. Measurements revealed a strong accumulation of PFC at the abscess rim at acute and chronic phase of infection. The pattern was similar to CLIO accumulation at chronic phase and formed a hollow sphere around the edema area. Histology revealed strong influx of neutrophils at the site of infection and to a smaller extend macrophages during acute phase and strong influx of macrophages at chronic phase of inflammation. Conclusion and Significance: We introduce (19)F-MRI in combination with PFC nanoemulsions as a new platform to visualize abscess formation in a murine thigh infection model of S. aureus. The possibility to track immune cells in vivo by this modality offers new opportunities to investigate host immune response, the efficacy of antibacterial therapies and the influence of virulence factors for pathogenesis. KW - Soft-tissue infection KW - In-vivo KW - Iron-oxide KW - F-19 MRI KW - Inflammation KW - Particles KW - Tracking KW - Lesions KW - Images KW - Rats Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142846 VL - 6 IS - 3 ER - TY - JOUR A1 - Han, Luyang A1 - Wiedwald, Ulf A1 - Biskupek, Johannes A1 - Fauth, Kai A1 - Kaiser, Ute A1 - Ziemann, Paul T1 - Nanoscaled alloy formation from self-assembled elemental Co nanoparticles on top of Pt films JF - Beilstein Journal of Nanotechnology N2 - The thermally activated formation of nanoscale CoPt alloys was investigated, after deposition of self-assembled Co nanoparticles on textured Pt(111) and epitaxial Pt(100) films on MgO(100) and SrTiO3(100) substrates, respectively. For this purpose, metallic Co nanoparticles (diameter 7 nm) were prepared with a spacing of 100 nm by deposition of precursor-loaded reverse micelles, subsequent plasma etching and reduction on flat Pt surfaces. The samples were then annealed at successively higher temperatures under a H2 atmosphere, and the resulting variations of their structure, morphology and magnetic properties were characterized. We observed pronounced differences in the diffusion and alloying of Co nanoparticles on Pt films with different orientations and microstructures. On textured Pt(111) films exhibiting grain sizes (20–30 nm) smaller than the particle spacing (100 nm), the formation of local nanoalloys at the surface is strongly suppressed and Co incorporation into the film via grain boundaries is favoured. In contrast, due to the absence of grain boundaries on high quality epitaxial Pt(100) films with micron-sized grains, local alloying at the film surface was established. Signatures of alloy formation were evident from magnetic investigations. Upon annealing to temperatures up to 380 °C, we found an increase both of the coercive field and of the Co orbital magnetic moment, indicating the formation of a CoPt phase with strongly increased magnetic anisotropy compared to pure Co. At higher temperatures, however, the Co atoms diffuse into a nearby surface region where Pt-rich compounds are formed, as shown by element-specific microscopy. KW - alloy KW - CoPt KW - HRTEM KW - nanoparticles KW - XMCD KW - Co KW - epitaxy KW - magnetometry KW - Pt Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142869 VL - 2 ER - TY - JOUR A1 - Sacépé, Benjamin A1 - Oostinga, Jeroen B. A1 - Li, Jian A1 - Ubaldini, Alberto A1 - Couto, Nuno J. G. A1 - Giannini, Enrico A1 - Morpurgo, Alberto F. T1 - Gate-tuned normal and superconducting transport at the surface of a topological insulator JF - Nature Communications N2 - Three-dimensional topological insulators are characterized by the presence of a bandgap in their bulk and gapless Dirac fermions at their surfaces. New physical phenomena originating from the presence of the Dirac fermions are predicted to occur, and to be experimentally accessible via transport measurements in suitably designed electronic devices. Here we study transport through superconducting junctions fabricated on thin Bi2Se3 single crystals, equipped with a gate electrode. In the presence of perpendicular magnetic field B, sweeping the gate voltage enables us to observe the filling of the Dirac fermion Landau levels, whose character evolves continuously from electron- to hole-like. When B=0, a supercurrent appears, whose magnitude can be gate tuned, and is minimum at the charge neutrality point determined from the Landau level filling. Our results demonstrate how gated nano-electronic devices give control over normal and superconducting transport of Dirac fermions at an individual surface of a three-dimensional topological insulators. KW - Physical sciences KW - Condensed matter KW - Materials science KW - nanotechnology Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140175 VL - 2 ER - TY - THES A1 - Dürig, Tobias T1 - Fracture dynamics in silicate glasses T1 - Bruchdynamiken in Silikatgläsern N2 - Understanding the mechanisms of fragmentation within silicate melts is of great interest not only for material science, but also for volcanology, particularly regarding molten fuel coolant-interactions (MFCIs). Therefore edge-on hammer impact experiments (HIEs) have been carried out in order to analyze the fracture dynamics in well defined targets by applying a Cranz-Schardin highspeed camera technique. This thesis presents the corresponding results and provides a thorough insight into the dynamics of fragmentation, particularly focussing on the processes of energy dissipation. In HIEs two main classes of cracks can be identified, characterized by completely different fracture mechanisms: Shock wave induced “damage cracks” and “normal cracks”, which are exclusively caused by shear-stresses. This dual fracture situation is taken into account by introducing a new concept, according to which the crack class-specific fracture energies are linearly correlated with the corresponding fracture areas. The respective proportionality constants - denoted “fracture surface energy densities” (FSEDs) - have been quantified for all studied targets under various constraints. By analyzing the corresponding high speed image sequences and introducing useful dynamic parameters it has been possible to specify and describe in detail the evolution of fractures and, moreover, to quantify the energy dissipation rates during the fragmentation. Additionally, comprehensive multivariate statistical analyses have been carried out which have revealed general dependencies of all relevant fracture parameters as well as characteristics of the resulting particles. As a result, an important principle of fracture dynamics has been found, referred to as the “local anisotropy effect”: According to this principle, the fracture dynamics in a material is significantly affected by the location of directed stresses. High local stress gradients cause a more stable crack propagation and consequently a reduction of the energy dissipation rates. As a final step, this thesis focusses on the volcanological conclusions which can be drawn on the basis of the presented HIE results. Therefore fragments stemming from HIEs have been compared with natural and experimental volcanic ash particles of basaltic Grimsvötn and rhyolitic Tepexitl melts. The results of these comparative particle analyses substantiate HIEs to be a very suitable method for reproducing the MFCI loading conditions in silicate melts and prove the FSED concept to be a model which is well transferable to volcanic fragmentation processes. N2 - Forschungen mit dem Ziel die Abhängigkeiten und Mechanismen von Bruchprozessen in amorphen silikatischen Materialien exakt verstehen zu lernen, sind nicht nur in den Materialwissenschaften, sondern darüber hinaus auch in der Vulkanologie von größter Bedeutung, vor allem auch im Hinblick auf thermohydraulische Schmelze-Wasser-Wechselwirkungen (sog. "molten fuel coolant-interactions", MFCIs). Aus diesem Grund wurden Hammerschlagexperimente (HIEs) durchgeführt, um unter Verwendung einer Cranz-Schardin Funkenzeitlupe die Bruchdynamiken in exakt definierten Versuchsmaterialien zu analysieren. Die vorliegende Arbeit stellt die Ergebnisse dieser Versuchsreihen vor und beleuchtet detailliert die zeitlichen Abläufe während der Fragmentation, wobei sie ihr Hauptaugenmerk besonders auf die energetischen Dissipationsprozesse beim Rissfortschritt richtet. In den HIEs können zwei Hauptklassen von Rissen identifiziert werden, welche durch vollkommen unterschiedliche Rissmechanismen gekennzeichnet sind: Stoßwelleninduzierte "Schadensrisse" ("damage cracks") und "Normalrisse" ("normal cracks"), welche ihre Ursachen ausschließlich in Scherspannungen haben. Diesem parallelen Vorhandensein beider Rissklassen wurde mit einem neu entwickelten Konzept Rechnung getragen: Ihm zufolge sind die rissklassenspezifischen Bruchenergien direkt proportional zur jeweiligen Bruchfläche, wobei die entsprechenden Proportionalitätskonstanten als Bruchflächenenergiedichten ("fracture surface energy densities", FSEDs) bezeichnet werden. Ihre Werte wurden für alle untersuchten Targets unter verschiedenen, genau definierten Randbedingungen ermittelt. Die Auswertungen der Zeitlupenaufnahmen und die Einführung neuer bruchdynamischer Parameter ermöglichten nicht nur eine detaillierte Beschreibung der Rissentwicklung im Target, sondern darüber hinaus auch quantitative Aussagen zur Dynamik der Bruchenergiedissipationsraten. Mit Hilfe umfassender multivariater statistischer Analysen war es zudem möglich, die allgemeinen Abhängigkeiten aller relevanten Bruchparameter sowie die Einflüsse auf die kennzeichnenden Merkmale der bei der Fragmentation erzeugten Partikel herauszufinden. Auf diese Weise konnte ein wichtiges Prinzip der Bruchdynamik nachgewiesen werden, das in dieser Arbeit als "lokaler Anisotropieeffekt" (“local anisotropy effect”) bezeichnet wird. Diesem Prinzip zufolge wird die Bruchdynamik in einem Material signifikant durch die Lage von gerichteten Spannungen beeinflusst: Hohe örtliche Spannungsgradienten senkrecht zur Bewegungsrichtung des Risses bewirken eine stabilere Rissausbreitung und damit eine Verringerung der Energiedissipationsraten. In einem letzten Schritt beschäftigt sich die vorliegende Arbeit mit der Frage, welche vulkanologischen Schlussfolgerungen man aus den vorgestellten Versuchsergebnissen ziehen kann. Dazu wurden die erzeugten HIE-Fragmente mit natürlichen und experimentellen vulkanischen Aschen verglichen, welche von rhyolitischen Tepexitl- und basaltischen Grimsvötn-Schmelzen entstammten. Auf Grundlage dieser Partikelvergleiche konnte gezeigt werden, dass die Hammerschlagsversuche eine geeignete Methode darstellen, um genau jene Belastungsbedingungen zu reproduzieren, welchen Magmen während eines MFCI ausgesetzt sind. Zudem wurde damit der Nachweis erbracht, dass das in dieser Arbeit vorgestellte FSED-Konzept sich adäquat auf vulkanische Fragmentationsprozesse übertragen lässt. KW - Bruchmechanik KW - Vulkanologie KW - Sprödbruch KW - Rissbildung KW - Rissverlauf KW - Bruchfläche KW - Glas KW - Stoßwelle KW - Fragmentation KW - Fragmentationsenergie KW - Hochgeschwindigkeitskinematographie KW - explosiver Vulkanismus KW - Impaktversuche KW - fragmentation KW - fragmentation energy KW - high-speed photography KW - explosive volcanism KW - impact experiments Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73492 ER - TY - THES A1 - Baß, Utz T1 - Analysis of MBE-grown II-VI Hetero-Interfaces and Quantum-Dots by Raman Spectroscopy T1 - Analyse von MBE-gewachsenen II-VI Heterogrenzschichten und Quantenpunkten mittels Ramanspektroskopie N2 - The material system of interest in this thesis are II-VI-semiconductors. The first part of this thesis focuses on the formation of self-assembled CdSe-based quantum dots (QD) on ZnSe. The lattice constants of ZnSe and CdSe differ as much as about 7\% and therefore a CdSe layer grown on top of ZnSe experiences a huge strain. The aspired strain relief constitutes in the self-assembly of QDs (i.e. a roughened layer structure). Additionally, this QD layer is intermixed with Zn as this is also a possibility to decrease the strain in the layer. For CdSe on ZnSe, in Molecular Beam Epitaxy (MBE), various QD growth procedures were analysed with respect to the resulting Cd-content of the non-stoichiometric ternary (Zn,Cd)Se. The evaluation was performed by Raman Spectroscopy as the phonon frequency depends on the Cd-content. The second part of the thesis emphasis on the interface properties of n-ZnSe on n-GaAs. Different growth start procedures of the ZnSe epilayer may lead to different interface configurations with characteristic band-offsets and carrier depletion layer widths. The analysis is mainly focused on the individual depletion layer widths in the GaAs and ZnSe. This non-destructive analysis is performed by evaluating the Raman signal which comprises of phonon scattering from the depleted regions and coupled plasmon-phonon scattering from regions with free carriers. N2 - Im Rahmen dieser Dissertation wurden II-VI Halbleiter untersucht. Der erste Teil behandelt die Selbstorganisation von CdSe basierten Quantenpunkten auf ZnSe. Die Gitterkonstante von ZnSe und CdSe differieren um ca. 7% und daher erfährt eine CdSe Schicht auf ZnSe eine riesige Verspannung. Der angestrebte Abbau dieser Verspannung resultiert in der Selbstorganisation von Quantenpunkten (bzw. einer rauen CdSe-Oberfläche). Zusätzlich bietet die Durchmischung mit Zn eine weitere Möglichkeit die Verspannung zu senken. In der Arbeit wurde mittels Raman Spektroskopie der Einfluss von verschiedenen MBE-Wachstumsmethoden auf den resultierenden Cd-Gehalt der Quantenpunktschicht untersucht. Im zweiten Teil standen die Grenzflächeneigenschaften von n-ZnSe auf n-GaAs im Fokus. Unterschiedliche Wachstumsmethoden dieser Grenzflächen können sich auf verschiedene Eigenschaften auswirken. Insbesondere in der Ausbildung von Verarmungszonen innerhalb der beiden Materialien an der Grenzfläche. Hierzu kam auch Raman Spektroskopie zum Einsatz da sich das Raman Signal aus Streubeiträgen von Phononen aus den verarmten Zonen und aus gekoppelten Plasmon-Phonon Moden aus den Schichten mit freien Ladungsträgern zusammensetzt. KW - Zwei-Sechs-Halbleiter KW - Molekularstrahlepitaxie KW - self-assembly KW - quantum-dots KW - Raman KW - plasmon KW - phonon KW - Wide-gap-Halbleiter KW - n-Halbleiter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-73413 ER - TY - THES A1 - Mark, Stefan T1 - A Magnetic Semiconductor based Non-Volatile Memory and Logic Element T1 - Ein auf magnetischen Halbleiter basierendes nicht-flüchtiges Speicher- und Logik-Element N2 - For the realization of a programmable logic device, or indeed any nanoscale device, we need a reliable method to probe the magnetization direction of local domains. For this purpose we extend investigations on the previously discovered tunneling anisotropic magneto resistance effect (TAMR) by scaling the pillar size from 100 µm down to 260 nm. We start in chapter 4 with a theoretical description of the TAMR effect and show experimental data of miniaturized pillars in chapter 5. With such small TAMR probes we are able to locally sense the magnetization on the 100 nm scale. Sub-micron TAMR and anisotropic magneto resistance (AMR) measurements of sub-millimeter areas show that the behavior of macroscopic (Ga,Mn)As regions is not that of a true macrospin, but rather an ensemble average of the behavior of many nearly identical macrospins. This shows that the magnetic anisotropies of the local regions are consistent with the behavior extracted from macroscopic characterization. A fully electrically controllable read-write memory device out the ferromagnetic semiconductor (Ga,Mn)As is presented in chapter 6. The structure consists of four nanobars which are connected to a circular center region. The first part of the chapter describes the lithography realization of the device. We make use of the sub-micron TAMR probes to read-out the magnetization state of a 650 nm central disk. Four 200 nm wide nanobars are connected to the central disk and serve as source and drain of a spin-polarized current. With the spin-polarized current we are able to switch the magnetization of the central disk by means of current induced switching. Injecting polarized holes with a spin angular momentum into a magnetic region changes the magnetization direction of the region due to the p-d exchange interaction between localized Mn spins and itinerant holes. The magnetization of the central disk can be controlled fully electrically and it can serve as one bit memory element as part of a logic device. In chapter 7 we discuss the domain wall resistance in (Ga,Mn)As. At the transition from nanobars to central disk we are able to generate 90° and 180° domain walls and measure their resistance. The results presented from chapter 5 to 7 combined with the preexisting ultracompact (Ga,Mn)As-based memory cell of ref. [Papp 07c] are the building blocks needed to realize a fully functioning programmable logic device. The work of ref. [Papp 07c] makes use of lithographically engineered strain relaxation to produce a structure comprised of two nanobars with mutually orthogonal uniaxial easy axes, connected by a narrow constriction. Measurements showed that the resistance of the constriction depends on the relative orientation of the magnetization in the two bars. The programmable logic device consists of two central disks connected by a small constriction. The magnetization of the two central disks are used as the input bits and the constriction serves as the output during the logic operation. The concept is introduced in the end of chapter 6 and as an example for a logic operation an XOR gate is presented. The functionality of the programmable logic scheme presented here can be straightforwardly extended to produce multipurpose functional elements, where the given geometry can be used as various different computational elements depending on the number of input bits and the chosen electrical addressing. The realization of such a programmable logic device is shown in chapter 8, where we see that the constriction indeed can serve as a output of the logic operation because its resistance is dependent on the relative magnetization state of both disks. Contrary to ref. [Papp 07c], where the individual magnetic elements connected to the constriction only have two non-volatile magnetic states, each disk in our scheme connected to the constriction has four non-volatile magnetic states. Switching the magnetization of a central disk with an electrical current does not only change the TAMR read-out of the respective disk, it also changes the resistance of the constriction. The resistance polar plot of the constriction maps the relative magnetization states of the individual disks. The presented device design serves as an all-electrical, all-semiconductor logic element. It combines a memory cell and data processing in a single monolithic paradigm. N2 - Für die Realisierung eines programmierbaren Logikelements oder beliebiger nanometer großer Bauteile, brauchen wir eine verlässlige Methode, um die Magnetisierungsrichtung lokaler Domänen auzulesen. Dafür erweitern wir die Untersuchungen an TAMR (tunneling magneto resistance) Strukturen und skalieren die Fläche des Tunnelkontakts von 100 µm auf 260 nm. In Kapitel 4 geben wir zunächst eine theoretische Beschreibung des TAMR Effekts und zeigen darauf im folgenden Kapitel 5 experimentelle Daten der miniaturisierten Tunnelkontakte. Mit diesen TAMR-Kontakten ist es möglich die Magnetisierung lokal in einer Grössenordnung von 100 nm zu detektieren. Sub-micron TAMR-Messungen und anisotrope Magnetowiderstandmessungen (AMR) an sub-millimeter Gebieten zeigen, dass das Verhalten von makrokopischen (Ga,Mn)As nicht das eines Makrospins ist, sondern ein Ensembledurchschnitt von vielen fast identischen Makrospins. Dieses Ergebnis ist mit der makroskopischen Beschreibung der lokalen magnetischen Aniotropien konform.\\ Ein rein elektrisch kontrollierbares Read-Write Speicherelement aus dem ferromagnetischen Halbleiter (Ga,Mn)As wird in Kapitel 6 gezeigt. Das Element besteht aus vier 200 nm breiten Streifen, die mit einer kreisförmigen zentralen Disc verbunden sind. Der erste Teil des Kapitels beschreibt die einzelnen Lithographieschritte zur Herstellung des Elements. Zum Auslesen der Magnetisierungsrichtung der zentralen Disc mit einem Durchmesser von 650 nm verwenden wir einen miniaturisierten TAMR-Kontakt. Die 200 nm breiten Streifen dienen als Quelle eines spinpolarisierten Stromes in die zentrale Disc. Das Injezieren von polarisierten Löchern mit einem Spin-Drehimpuls in eine magnetische Region verändert die Magnetisierung der Region durch p-d Austauschwechselwirkung zwischen lokalisierten Mn-Spins und den Löchern. Die Magnetisierung der zentralen Disc kann rein elektrisch kontrolliert werden and als Bit eines Logikelementes verwendet werden. In Kapitel 7 untersuchen wir den Domänenwiderstand in (Ga,Mn)As. Am Übergang von den Streifen zur zentralen Disc ist es möglich 90°- und 180° Domänenwände zu erzeugen und deren Widerstand zu messen.\\ Die Ergebnisse von Kapitel 5 bis 7, kombiniert mit dem bereits existierenden Ergebnissen einer ultrakompakten (Ga,Mn)As-basierenden Speicherzelle von Ref. [Papp 07c], sind die Schlüsselelemente die man zur Realisierung eines programmierbaren Logikelements benötigt. Die Arbeit von Referenz [Papp 07c] nutzt Lithographie induzierte Deformationsrelaxation, um eine Struktur zu erzeugen, die aus zwei senkrechten Streifen besteht und durch eine Verengung verbunden sind. Der Widerstand dieser Verengung ist von der relativen Magnetisierungsorientierung der beiden Streifen abhängig. Das programmierbare Logikelement besteht aus zwei zentralen Discs, die mittels einer schmalen Verengung verbunden sind. Die Magnetisierung der beiden zentralen Discs dienen als Eingänge und die Verengung als Ausgang während der Logikoperation. Das Konzept wird am Ende des sechsten Kapitels eingeführt und als Beispiel für eine Logikoperation wird ein XOR-Gate präsentiert. Die Funktionalität des hier gezeigten programmierbaren Logikschemas kann Problemlos auf ein multifunktionales Element erweitert werden. Diese Geometrie kann abhängig von der Anzahl der Eingänge und der gewählten Adressierung für verschiedene Rechenelemente genutzt werden. \\ Die Realisierung eines programmierbaren Logikelements ist in Kapitel 8 gezeigt. Der Widerstand der Verengung hängt von der relativen Magnetisierungsrichtung der beiden zentralen Discs ab und wird als Ausgang während der Logikoperation verwendet. Im Gegensatz zu Referenz [Papp 07c], indem die einzelnen über die Verengung verbundenen magnetischen Elemente jeweils nur zwei nicht-flüchtige magnetische Zustände besitzen, hat jede zentrale Disc in unserem Schema vier nicht-flüchtige magnetische Zustände. Das Verändern der Magnetisierungsrichtung einer zentralen Disc durch einen elektrischen Strom kann durch den jeweiligen TAMR-Kontakt und durch die Widerstandänderung der Verengung gemessen werden. Der Widerstands-Fingerabdruck (resistance polar plot) der Verengung zeigt die verschiedenen relativen Magnetisierungszutände der zentralen Discs.\\ Das hier präsentierte Konzept dient als reines Halbleiter und rein-elektrisches Logikelement. Es kombiniert eine Speicherzelle und Datenverarbeitung in einem neuartigen monolithischen Bauelement. KW - Magnetischer Halbleiter KW - Magnetische Halbleiter KW - Magnetische Anisotropien KW - Spinelektronik KW - magnetic semiconductors KW - magnetic anisotropy KW - Magnetic properties of thin films interfaces KW - Spinelectronic KW - Magnetische Anisotropie KW - Spintronik Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71223 ER - TY - THES A1 - Rüth, Michael T1 - A Comprehensive Study of Dilute Magnetic Semiconductor Resonant Tunneling Diodes T1 - Umfassende Untersuchung von resonanten Tunneldioden aus verdünnt-magnetischen Halbleitern N2 - We investigate transport measurements on all II-VI semiconductor resonant tunneling diodes (RTDs). Being very versatile, the dilute magnetic semiconductor (DMS) system (Zn,Be,Mn,Cd)Se is a perfect testbed for various spintronic device designs, as it allows for separate control of electrical and magnetic properties. In contrast to the ferromagnetic semiconductor (Ga,Mn)As, doping ZnSe with Mn impurities does not alter the electrical properties of the semiconductor, as the magnetic dopant is isoelectric in the ZnSe host. N2 - Diese Doktorarbeit befasst sich mit Transportmessungen an resonanten Tunneldioden (engl. resonant tunneling diode, RTD), welche vollst� andig aus II-VI Halbleitermaterial bestehen. Das verd� unnt magnetische (engl. dilute magnetic semiconductor, DMS) Halbleitermaterialsystem (Zn,Be,Mn,Cd)Se ist sehr vielseitig und eignet sich hervorragend als Testsystem f� ur diverse Spintronik Bauelemente, denn magnetische und elektrische Eigenschaften lassen sich getrennt voneinander einstellen. Im Gegensatz zum ferromagnetischen Halbleiter (Ga,Mn)As ver� andert das Dotieren von ZnSe mit Mn nicht die elektrischen Eigenschaften des Halbleiters. KW - Semimagnetischer Halbleiter KW - Resonanz-Tunneleffekt KW - Halbleiter KW - Resonante Tunneldioden KW - Spintronik KW - dilute magnetic semiconductors KW - spintronics KW - resonant tunneling diodes Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71472 ER - TY - JOUR A1 - Janotta, Peter A1 - Gogolin, Christian A1 - Barrett, Jonathan A1 - Brunner, Nicolas T1 - Limits on nonlocal correlations from the structure of the local state space N2 - The outcomes of measurements on entangled quantum systems can be nonlocally correlated. However, while it is easy to write down toy theories allowing arbitrary nonlocal correlations, those allowed in quantum mechanics are limited. Quantum correlations cannot, for example, violate a principle known as macroscopic locality, which implies that they cannot violate Tsirelson’s bound. This paper shows that there is a connection between the strength of nonlocal correlations in a physical theory and the structure of the state spaces of individual systems. This is illustrated by a family of models in which local state spaces are regular polygons, where a natural analogue of a maximally entangled state of two systems exists. We characterize the nonlocal correlations obtainable from such states. The family allows us to study the transition between classical, quantum and super-quantum correlations by varying only the local state space. We show that the strength of nonlocal correlations—in particular whether the maximally entangled state violates Tsirelson’s bound or not— depends crucially on a simple geometric property of the local state space, known as strong self-duality. This result is seen to be a special case of a general theorem, which states that a broad class of entangled states in probabilistic theories—including, by extension, all bipartite classical and quantum states— cannot violate macroscopic locality. Finally, our results show that models exist that are locally almost indistinguishable from quantum mechanics, but can nevertheless generate maximally nonlocal correlations. KW - Physik Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-75003 ER - TY - JOUR A1 - Jakob, Peter A1 - Hertlein, Tobias A1 - Sturm, Volker A1 - Kircher, Stefan A1 - Basse-Lüsebrink, Thomas A1 - Haddad, Daniel A1 - Ohlsen, Knut T1 - Visualization of Abscess Formation in a Murine Thigh Infection Model of Staphylococcus aureus by 19F-Magnetic Resonance Imaging (MRI) N2 - Background: During the last years, 19F-MRI and perfluorocarbon nanoemulsion (PFC) emerged as a powerful contrast agent based MRI methodology to track cells and to visualize inflammation. We applied this new modality to visualize deep tissue abscesses during acute and chronic phase of inflammation caused by Staphylococcus aureus infection. Methodology and Principal Findings: In this study, a murine thigh infection model was used to induce abscess formation and PFC or CLIO (cross linked ironoxides) was administered during acute or chronic phase of inflammation. 24 h after inoculation, the contrast agent accumulation was imaged at the site of infection by MRI. Measurements revealed a strong accumulation of PFC at the abscess rim at acute and chronic phase of infection. The pattern was similar to CLIO accumulation at chronic phase and formed a hollow sphere around the edema area. Histology revealed strong influx of neutrophils at the site of infection and to a smaller extend macrophages during acute phase and strong influx of macrophages at chronic phase of inflammation. Conclusion and Significance: We introduce 19F-MRI in combination with PFC nanoemulsions as a new platform to visualize abscess formation in a murine thigh infection model of S. aureus. The possibility to track immune cells in vivo by this modality offers new opportunities to investigate host immune response, the efficacy of antibacterial therapies and the influence of virulence factors for pathogenesis. KW - Staphylococcus aureus Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74994 ER - TY - THES A1 - Fischer, André T1 - On the Application of Compressed Sensing to Magnetic Resonance Imaging T1 - Über die Anwendung von Compressed Sensing in der Magnetresonanztomographie N2 - This thesis investigated the potential of Compressed Sensing (CS) applied to Magnetic Resonance Imaging (MRI). CS is a novel image reconstruction method that emerged from the field of information theory. The framework of CS was first published in technical reports in 2004 by Candès and Donoho. Two years later, the theory of CS was published in a conference abstract and two papers. Candès and Donoho proved that it is possible, with overwhelming probability, to reconstruct a noise-free sparse signal from incomplete frequency samples (e.g., Fourier coefficients). Hereby, it is assumed a priori that the desired signal for reconstruction is sparse. A signal is considered “sparse“ when the number of non-zero elements is significantly smaller than the number of all elements. Sparsity is the most important foundation of CS. When an ideal noise-free signal with few non-zero elements is given, it should be understandably possible to obtain the relevant information from fewer Fourier coefficients than dictated by the Nyquist-Shannon criterion. The theory of CS is based on noise-free sparse signals. As soon as noise is introduced, no exact sparsity can be specified since all elements have signal intensities that are non-zero. However, with the addition of little or moderate noise, an approximate sparsity that can be exploited using the CS framework will still be given. The ability to reconstruct noisy undersampled sparse MRI data using CS has been extensively demonstrated. Although most MR datasets are not sparse in image space, they can be efficiently sparsified by a sparsifying transform. In this thesis, the data are either sparse in the image domain, after Discrete Gradient transformation, or after subtraction of a temporally averaged dataset from the data to be reconstructed (dynamic imaging). The aim of this thesis was to identify possible applications of CS to MRI. Two different algorithms were considered for reconstructing the undersampled sparse data with the CS concept. The Nonlinear Conjugate Gradient based technique with a relaxed data consistency constraint as suggested by Lustig et al. is termed Relaxed DC method. An alternative represents the Gradient or Steepest Descent algorithm with strict data consistency and is, therefore, termed the Strict DC method. Chapter 3 presents simulations illustrating which of these two reconstruction algorithms is best suited to recover undersampled sparse MR datasets. The results lead to the decision for the Strict DC method as reconstruction technique in this thesis. After these simulations, different applications and extensions of CS are demonstrated. Chapter 4 shows how CS benefits spectroscopic 19F imaging at 7 T, allowing a significant reduction of measurement times during in vivo experiments. Furthermore, it allows highly resolved spectroscopic 3D imaging in acceptable measurement times for in vivo applications. Chapter 5 introduces an extension of the Strict DC method called CS-CC (CS on Combined Coils), which allows efficient processing of sparse undersampled multi-coil data. It takes advantage of a concept named “Joint Sparsity“, which exploits the fact that all channels of a coil array detect the same sparse object weighted with the coil sensitivity profiles. The practical use of this new algorithm is demonstrated in dynamic radial cardiac imaging. Accurate reconstructions of cardiac motion in free breathing without ECG triggering were obtained for high undersampling factors. An Iterative GRAPPA algorithm is introduced in Chapter 6 that can recover undersampled data from arbitrary (Non-Cartesian) trajectories and works solely in the Cartesian plane. This characteristic makes the proposed Iterative GRAPPA computationally more efficient than SPIRiT. Iterative GRAPPA was developed in a preceding step to combine parallel imaging with CS. Optimal parameters for Iterative GRAPPA (e.g. number of iterations, GRAPPA kernel size) were determined in phantom experiments and verified by retrospectively undersampling and reconstructing a radial cardiac cine dataset. The synergistic combination of the coil-by-coil Strict DC CS method and Iterative GRAPPA called CS-GRAPPA is presented in Chapter 7. CS-GRAPPA allows accurate reconstruction of undersampled data from even higher acceleration factors than each individual method. It is a formulation equivalent to L1-SPIRiT but computationally more efficient. Additionally, a comparison with CS-CC is given. Interestingly, exploiting joint sparsity in CS-CC is slightly more efficient than the proposed CS-GRAPPA, a hybrid of parallel imaging and CS. The last chapter of this thesis concludes the findings presented in this dissertation. Future applications expected to benefit from CS are discussed and possible synergistic combinations with other existing MR methodologies for accelerated imaging are also contemplated. N2 - In der vorliegenden Arbeit wurde untersucht, welches Potential die Anwendung von Compressed Sensing (CS) in der Magnetresonanztomographie (MRT) hat. CS ist eine neue Bildrekonstruktionsmethode aus der Informationstheorie. Das Grundgerüst für CS wurde zuerst in zwei technischen Berichten von Candès und Donoho aus dem Jahr 2004 vorgestellt. Zwei Jahre später wurde die CS-Theorie in einem Konferenzbeitrag und zwei wissenschaftlichen Artikeln veröffentlicht. Candés und Donoho zeigten, dass es mit überwältigender Wahrscheinlichkeit möglich ist, ein rauschfreies sparses Signal aus unvollständig vorliegender Frequenzinformation zu rekonstruieren. Hierfür ist eine wichtige A-priori-Annahme, dass das gewünschte Signal, welches rekonstruiert werden soll, sparse sein soll. Man spricht von sparsen Signalen, falls die Anzahl der Elemente mit Intensität größer Null signifikant kleiner als die Anzahl aller Elemente ist. Die CS-Theorie basiert auf rauschfreien, sparsen Signalen. Sobald Rauschen auftritt, kann keine exakte Sparsity mehr bestimmt werden, da alle Elemente Signalintensitäten größer Null haben. Falls jedoch nur wenig oder moderates Rauschen hinzugefügt wird ist immer noch näherungsweise eine Sparsity gegeben, die mit Hilfe von CS ausgenutzt werden kann. Die meisten MR-Datensätze sind nicht-sparse im Bildraum, können allerdings durch eine sog. Sparsifizierungstransformation effektiv sparsifiziert werden. In der vorliegenden Arbeit sind die Daten entweder im Bildraum sparse, nach einer Diskreten-Gradienten-Transformation oder nachdem bei dynamischen Daten ein zeitlich gemittelter Datensatz von den zu rekonstruierenden Daten abgezogen worden ist. Das Ziel dieser Arbeit war es, mögliche Anwendungen für CS in der MRT zu identifizieren. Zwei unterschiedliche Algorithmen wurden untersucht, um unterabgetastete sparse Daten mit dem CS-Konzept zu rekonstruieren. Eine Technik, die auf einer Nichtlinearen Methode der Konjugierten Gradienten basiert und eine gelockerte Datenkonsistenzbedingung beinhaltet, wird als Relaxed DC-Methode bezeichnet. Eine Alternative stellt der Gradienten- oder Steilster-Abstieg-Algorithmus dar, der strikte Datenkonsistenz fordert und daher als Strict-DC-Methode bezeichnet wird. Kapitel 3 zeigt Simulationen, die darlegen, dass die Strict-DC-Methode am besten zur Datenrekonstruktion in dieser Arbeit geeignet ist. Kapitel 4 zeigt, in wie fern die spektroskopische 19F-Bildgebung bei 7 T von CS profitieren kann, indem CS eine signifikante Reduktion der Messzeiten bei in vivo Experimenten erlaubt. Desweiteren ermöglicht CS hochaufgelöste spektroskopische 3D-Bildgebung in akzeptablen Messzeiten für in vivo Anwendungen. Kapitel 5 führt eine Erweiterung der Strict-DC-Methode ein, die CS-CC genannt wird, welche eine effiziente Bearbeitung von sparsen unterabgetasteten Multi-Empfänger-Datensätzen erlaubt. Hierbei profitiert CS-CC von einem Konzept namens "Joint Sparsity", welches ausnutzt, dass alle Empfangskanäle eines Spulenarrays dasselbe sparse Objekt detektieren, jeweils gewichtet mit den entsprechenden Spulensensitivitätsprofilen. Der praktische Nutzen dieses neuen Algorithmus wird an einem dynamischen radialen Herzdatensatz verdeutlicht. Akkurate Rekonstruktionen der Herzbewegung in freier Atmung und ohne EKG-Trigger konnten bei hohen Unterabtastfaktoren erreicht werden. Ein Iterativer-GRAPPA-Algorithmus, der unterabgetastete Daten beliebiger (nicht-kartesischer) Trajektorien rekonstruieren kann und ausschließlich auf einem kartesischen Gitter arbeitet, wird in Kapitel 6 vorgestellt. Das vorgeschlagene Iterative GRAPPA ist vom Rechenaufwand her effizienter als SPIRiT und wurde als ein vorhergehender Schritt zur Kombination von Paralleler Bildgebung und Compressed Sensing entwickelt. Optimale Parameter für Iteratives GRAPPA (z.B. Anzahl an Iterationen, GRAPPA-Kern-Größe) wurden in Phantom-Experimenten bestimmt und mittels Rekonstruktionen an einem retrospektiv unterabgetasteten radialen Herzdatensatz verifiziert. Die synergetische Kombination der spulenweise angewendeten Strict-DC-Methode und Iterativem GRAPPA genannt CS-GRAPPA wird in Kapitel 7 präsentiert. CS-GRAPPA erlaubt akkurate Rekonstruktionen unterabgetasteter Daten von höheren Beschleunigungsfaktoren, als mit den jeweiligen Einzelmethoden möglich gewesen wäre. Die Formulierung ist äquivalent zu L1-SPIRiT, allerdings vom Rechenaufwand effizienter. Es wurde zusätzlich ein Vergleich zu CS-CC durchgeführt. Interessanterweise hat sich gezeigt, dass das Ausnutzen der Joint Sparsity in CS-CC etwas effizienter ist als das vorgeschlagene CS-GRAPPA, das ein Hybrid aus Compressed Sensing und Paralleler Bildgebung ist. Im abschließenden Kapitel dieser Dissertation werden die Ergebnisse zusammengefasst und Schlussfolgerungen daraus gezogen. Zukünftige Anwendungen werden diskutiert, die von CS profitieren und mögliche synergetische Kombinationen mit anderen existierenden MR-Methoden für beschleunigte Bildgebung werden angesprochen. KW - NMR-Tomographie KW - Rekonstruktion KW - NMR-Bildgebung KW - Compressed Sensing KW - Unterabtastung KW - Compressed Sensing KW - Undersampling Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72496 ER - TY - THES A1 - Eyring, Stefan T1 - Extremely Nonlinear Optics with wavefront controlled ultra-short laser pulses T1 - Extrem nichtlineare Optik mit wellenfront-gesteuerten ultrakurzen Laserpulsen N2 - This work deals with nonlinear optics with wavefront controlled ultra-short laser pulses. The effects studied are self-phase modulation due to filamentation of ultra-short laser pulses and high-order harmonic generation in a jet of noble gas. Additionally, a way to optimize the spectral brilliance of the high-order harmonic source is studied by measuring the spectrum and wavefront of the generated XUV beam. N2 - Diese Arbeit beschäftigt sich mit nichtlinearer Optik mit wellenfront-gesteuerten ultrakurzen Laserpulsen. Die untersuchten nichtlinearen Effekte sind die Selbstphasenmodulation in einem Filament und die Erzeugung von hohen Harmonischen in einem Edelgasjet. Weiterhin wird eine Methode zur Optimierung der spektralen Brillanz der Hohen-Harmonischen Quelle untersucht. Die spektrale Brillanz wird mit Hilfe des Spektrums und der Wellenfront des erzeugten XUV-Strahls bestimmt. KW - Nichtlineare Optik KW - Ultrakurzer Lichtimpuls KW - Ultrakurze Laserpulse KW - Hohen-Harmonischen Erzeugung KW - Hartmannsensor KW - ultra-short laser pulses KW - nonlinear optics KW - high-order harmonic generation KW - wavefront KW - adaptive optics KW - Titan-Saphir-Laser KW - Laserverstaerker KW - Laser KW - Jena / Institut fuer Optik und Quantenelektronik Jena KW - Kohaerente Optik Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72351 ER - TY - THES A1 - Ehses, Philipp T1 - Development of new Acquisition Strategies for fast Parameter Quantification in Magnetic Resonance Imaging T1 - Entwicklung neuer Aufnahmeverfahren zur schnellen Parameterbestimmung in der Magnetresonanztomographie N2 - Magnetic resonance imaging (MRI) is a medical imaging method that involves no ionizing radiation and can be used non-invasively. Another important - if not the most important - reason for the widespread and increasing use of MRI in clinical practice is its interesting and highly flexible image contrast, especially of biological tissue. The main disadvantages of MRI, compared to other widespread imaging modalities like computed tomography (CT), are long measurement times and the directly resulting high costs. In the first part of this work, a new technique for accelerated MRI parameter mapping using a radial IR TrueFISP sequence is presented. IR TrueFISP is a very fast method for the simultaneous quantification of proton density, the longitudinal relaxation time T1, and the transverse relaxation time T2. Chapter 2 presents speed improvements to the original IR TrueFISP method. Using a radial view-sharing technique, it was possible to obtain a full set of relaxometry data in under 6 s per slice. Furthermore, chapter 3 presents the investigation and correction of two major sources of error of the IR TrueFISP method, namely magnetization transfer and imperfect slice profiles. In the second part of this work, a new MRI thermometry method is presented that can be used in MRI-safety investigations of medical implants, e.g. cardiac pacemakers and implantable cardioverter-defibrillators (ICDs). One of the major safety risks associated with MRI examinations of pacemaker and ICD patients is RF induced heating of the pacing electrodes. The design of MRI-safe (or MRI-conditional) pacing electrodes requires elaborate testing. In a first step, many different electrode shapes, electrode positions and sequence parameters are tested in a gel phantom with its geometry and conductivity matched to a human body. The resulting temperature increase is typically observed using temperature probes that are placed at various positions in the gel phantom. An alternative to this local thermometry approach is to use MRI for the temperature measurement. Chapter 5 describes a new approach for MRI thermometry that allows MRI thermometry during RF heating caused by the MRI sequence itself. Specifically, a proton resonance frequency (PRF) shift MRI thermometry method was combined with an MR heating sequence. The method was validated in a gel phantom, with a copper wire serving as a simple model for a medical implant. N2 - Die Magnetresonanztomographie (MRT) zeichnet sich als medizinisches Bildgebungsverfahren dadurch aus, dass sie ohne ionisierende Strahlung auskommt und nicht-invasiv einsetzbar ist. Ein weiterer wichtiger - wenn nicht der wichtigste - Grund für die weite und wachsende Verbreitung der MRT in der klinischen Praxis ist ihr interessantes und hoch-flexibles Kontrastverhalten, und damit die gute Darstellbarkeit biologischen Gewebes. Die Hauptnachteile der MRT sind die, verglichen mit z.B. Computer-Tomographie (CT), langen Messzeiten und die damit direkt verbundenen hohen Untersuchungskosten. Der erste Teil dieser Arbeit beschreibt Verbesserungen der IR TrueFISP Methode zur MR-Parameterbestimmung. IR TrueFISP ist eine schnelle Methode zur gleichzeitigen Quantifizierung der Protonendichte, der longitudinalen Relaxationszeit T1, sowie der transversalen Relaxationszeit T2. In Kapitel 2 dieser Arbeit wird eine Methode zur Beschleunigung der IR TrueFISP Quantifizierung vorgestellt, die es erlaubt einen kompletten Relaxometrie-Datensatz in unter 6 s pro Schicht aufzunehmen. Weiterhin werden in Kapitel 3 zwei allgemeine Fehlerquellen der IR TrueFISP Methode untersucht und Korrekturverfahren vorgestellt. Im zweiten Teil dieser Arbeit werden neuartige MR-Thermometrie Methoden vorgestellt, die sich besonders zur Untersuchung der MR-Sicherheit von medizinischen Implanten, insbesondere Herzschrittmachern und implantierbaren Kardioverter-Defibrillatoren (ICDs), eignen. Momentan sind in den allermeisten Fällen MRT Untersuchungen an Herzschrittmacher- und ICD-Patienten aufgrund der damit verbundenen Risiken kontraindiziert. Das dabei am schwierigste in den Griff zu bekommende und damit größte Risiko ist die mögliche Schädigung des Myokards, hervorgerufen durch die von den geschalteten HF-Feldern induzierten Ströme in den Schrittmacherelektroden. Um eine MR-sichere Elektrode und/oder sichere Messprotokole zu entwickeln ist es notwendig viele verschiedene Elektroden, Elektrodenpositionen und Messparameter-Einstellungen in einem körperähnlichen Gel-Phantom untersucht. Die bei der jeweiligen Messung auftretenden Erhitzungen werden dabei meist mit Hilfe fiberoptischer Thermometer an verschiedenen Positionen im Gel gemessen. Eine Alternative ist die Aufnahme einer globalen Karte der Temperaturerhöhung mit Hilfe der MR-Thermometrie. In dieser Arbeit wird eine Messmethode vorgestellt, die MR-Thermometrie mit HF induziertem Heizen kombiniert. Diese Methode wurde an einem Kupferdraht im Gelphantom validiert und mit fiberoptisch gemessenen Temperaturanstiegen verglichen. KW - Kernspintomografie KW - Messprozess KW - Relaxometrie KW - Thermometrie KW - nicht-kartesische Bildgebung KW - Relaxometry KW - Thermometry KW - non-Cartesian imaging KW - Optimierung KW - MRI KW - NMR-Tomographie Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72531 ER - TY - JOUR A1 - Reichardt, Joerg A1 - Alamino, Roberto A1 - Saad, David T1 - The interplay between microscopic and mesoscopic structures in complex networks N2 - Understanding a complex network’s structure holds the key to understanding its function. The physics community has contributed a multitude of methods and analyses to this cross-disciplinary endeavor. Structural features exist on both the microscopic level, resulting from differences between single node properties, and the mesoscopic level resulting from properties shared by groups of nodes. Disentangling the determinants of network structure on these different scales has remained a major, and so far unsolved, challenge. Here we show how multiscale generative probabilistic exponential random graph models combined with efficient, distributive message-passing inference techniques can be used to achieve this separation of scales, leading to improved detection accuracy of latent classes as demonstrated on benchmark problems. It sheds new light on the statistical significance of motif-distributions in neural networks and improves the link-prediction accuracy as exemplified for gene-disease associations in the highly consequential Online Mendelian Inheritance in Man database. KW - Netzwerk KW - Mesoskopisches System Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-68993 ER - TY - THES A1 - Lochner, Florian T1 - Epitaxial growth and characterization of NiMnSb layers for novel spintronic devices T1 - Epitaktisches Wachstum und Charakterisierung von NiMnSb Schichten für neuartige Spintronikanwendungen N2 - In dieser Dissertation wurde das epitaktische Wachstum und die Charakterisierung des halb-metallischen Ferromagneten NiMnSb vorgestellt. NiMnSb kristallisiert in der C1b Kristallstruktur, welche ähnlich der Zinkblendestruktur von häufig verwendeten III-V Halbleitern ist. Eine besondere Eigenschaft von NiMnSb ist die theoretische 100% Spin-polarisation an der Fermikante, die es zu einem perfekten Kandidaten für Spintronikexperimente macht. Eine weitere große Rolle für diese Arbeit spielten die magnetischen Eigenschaften von NiMnSb, insbesondere die niedrige magnetische Dämpfung der abgeschiedenen Schichten. Alle gewachsenen Schichten wurden mit der MBE-Technik hergestellt. Die Schichtstapel für alle unterschiedlichen Experimente und Anwendungen wurden auf InP Substrate in (001) oder (111)B Orientierung abgeschieden. Vor der NiMnSb Schicht wurde eine undotierte (In,Ga)As Pufferschicht gewachsen. Für einige Proben auf InP(111)B wurde zusätzlich eine Si-dotierte (In,Ga)As-Schicht auf die undotierte (In,Ga)As-Schicht gewachsen. Die Dotierungskonzentration der n-dotierenten Schicht wurde per ETCH-CV bestimmt. Alle Schichten wurden auf strukturelle Eigenschaften und die NiMnSb-Schichten zusätzlich auf magnetische Eigenschaften untersucht. Für die strukturellen Untersuchungen wurde die in-situ Technik RHEED und das ex-situ Werkzeug HRXRD verwendet. Auf beiden Orientierungen zeigten die RHEED-Beobachtungen eine gute Qualität der gewachsenen Puffer- und halb-metallischen Ferromagnetschichten. Dieses Ergebnis wurde durch die HRXRD-Messung bestärkt. Es konnte die vertikale Gitterkonstante bestimmt werden. Der erhaltene Wert von NiMnSb auf InP(001) a(NiMnSb_vertikal) = 5.925 Å ist in guter Übereinstimmung mit dem Literaturwert a(NiMnSb_Lit) = 5.903 Å[Cas55]. Für NiMnSb auf InP(111)B wurde eine vertikale Gitterkonstante von a(NiMnSb_vertikal) = 6.017 Å bestimmt. Die horizontale Gitterkonstante des Puffers und des halb-metallischen Ferromagneten konnte in guter Übereinstimmung mit der Substratgitterkonstante bestimmt werden. Allerdings ist dieses Ergebnis ausschließlich bis zu einer Schichtdicke von ≈40nm für NiMnSb gültig. Um diese maximale Schichtdicke zu erhöhen, wurden NiMnSb auf InP(001) Substrate gewachsen und mit einer Ti/Au-Schicht als Schutz versehen. Mit diesen Proben wurden reziproke Gitterkarten des (533) Reflex mit GIXRD am Synchrotron BW2 des HASYLAB gemessen [Kum07]. Es hat sich gezeigt, dass sich die kritische Schichtdicke mehr als verdopppeln lässt, wenn eine Ti/Au- Schicht direkt nach dem Wachstum von NiMnSb abgeschieden wird, ohne das Ultrahochvakuum (UHV) zu verlassen. Die magnetischen Eigenschaften wurden mit FMR Experimenten und SQUID bestimmt. Der gemessene magnetische Dämpfungsparameter α einer 40nm dicken NiMnSb Schicht auf InP(001) wurde zu 3.19e−3 entlang [1-10] bestimmt. Die resultierende Linienbreite von unseren Schichten auf InP(001) ist mehr als 4.88 mal kleiner als bei [Hei04] gemessen. Ein weiteres Ergebnis ist die Richtungsabhängigkeit der Dämpfung. Es wurde gemessen, dass die Dämpfung sich um mehr als 42% ändert, wenn das angelegte Feld um 45° von [1-10] nach [100] gedreht wird. Mit SQUID messten wir die Sättigungsmagnetisierung von einer 40nm dicken NiMnSb-Schicht zu 4µB. NiMnSb-Schichten auf InP(111)B Substrate wurden ebenfalls mit FMR untersucht, mit einem überraschenden Ergebnis. Diese Schichten zeigten nicht nur eine Abnahme im Anisotropiefeld mit ansteigender Schichtdicke, sondern auch ein uniaxiales Anisotropieverhalten. Dieses Verhalten kann mit Defekten in diesen Proben erklärt werden. Mit einem Rasterkraftmikroskop (AFM) wurden dreieckige Defekte gemessen. Diese Defekte haben ihren Ursprung in der Pufferschicht und beeinflussen die magnetischen Eigenschaften. Ein weiterer Teil dieser Arbeit widmete sich dem Verhalten von NiMnSb bei Temperaturen um die 80K. In unserer Probe konnte ein Phasenübergang in den Messdaten des normalen Hall Koeffizienten, anomalen Hall-Term und Leitungswiderstand nicht beobachtet werden. Der letzte Teil dieser Arbeit behandelt verschiedene Spintronikanwendungen, welche aus unseren NiMnSb-Schichten gebaut wurden. In einer ersten Anwendung agiert die Magnetisierung auf einen Strom I. Die so genannte GMR-Anwendung besteht aus InP:S(001)- 180nm undotierten (In,Ga)As - 40nm NiMnSb - 10nm Cu - 6nm NiFe - 10nm Ru in CPP Geomtrie . Wir erhielten ein MR-Verhältnis von 3.4%. In einer zweiten Anwendung agiert der Strom I auf die Magnetisierung und nutzt dabei das Phänomen des Spin-Drehmomentes aus. Dieser so genannte Spin Torque Oscillator (STO) emittiert Frequenzen im GHz Bereich (13.94GHz - 14.1GHz). Die letzte hergestellte Anwendung basiert auf dem magnetischen Wirbelphänomen. Für das Umschalten der Kernpolarität sind die gyrotropischen Frequenzen f + = 254MHz, f − = 217MHz und ein totales, statisches magnetisches Feld von nur mµ0H = 65mT nötig. Die Umkehreffizienz wurde besser als 99% bestimmt. N2 - In this work the epitaxial growth and characterization of the half-metallic ferromagnet NiMnSb was presented. NiMnSb crystallizes in the C1b structure which is similar to the zinc blende structure from widely used III-V semiconductors. One special property of NiMnSb is the theoretical 100% spin-polarization at the Fermi edge. This makes it a perfect candidate for spintronic experiments and the material of choice for building novel spintronic devices. Another important topic in this work were the magnetic properties of NiMnSb, especially the low magnetic damping of the grown thin films. All grown layers were fabricated with the technique of MBE. The layer stacks for all different experiments and devices were grown on InP substrate in (001) or (111)B orientation. Before the NiMnSb layer a buffer layer of undoped (In,Ga)As was grown. Additional for some samples on InP(111)B, a Si doped (In,Ga)As layer was grown on top of the undoped (In,Ga)As layer. The dopant concentration of this n-doped layer was determined by ETCH-CV. All layers were investigated by structural and the NiMnSb layer additional by magnetic properties. For the structural investigation the in-situ technique RHEED and ex-situ tool HRXRD were used. RHEED observations showed a good quality of the grown buffer and half-metallic ferromagnet layers on both orientations. These results were strengthened by the HRXRD measurement. The vertical lattice constant could be determined. The received value of a(NiMnSb_vertical) = 5.925 Å for NiMnSb on InP(001) is in good agreement to the value a(NiMnSb_Lit) = 5.903 Å found in literature [Cas55]. For NiMnSb on InP(111)B a vertical lattice constant of a(NiMnSb_vertikal) = 6.017 Å could be determined. The horizontal lattice constant of the buffer and the half-metallic ferromagnet layer could be determined as the same of the substrate. For NiMnSb this conclusion is only valid up to a thickness of ≈40nm. To increase this maximum thickness, NiMnSb samples were grown on InP(001) substrates and capped with Ti/Au layers. Afterwards a reciprocal space map of the (533) reflex was drawn with GIXRD at the synchrotron beamline BW2 of HASYLAB [Kum07]. It has been shown that the critical thickness is more than doubled by depositing a Ti/Au capping directly after growth of NiMnSb without breaking the ultrahigh vacuum (UHV). The magnetic properties were determined with FMR experiments and SQUID measurements. The received magnetic damping parameter α from a 40nm thick NiMnSb layer on InP(001) could be determined to 3.19e−3 along [1-10]. The resulting line width of our NiMnSb layers on InP(001) is more than 4.88 times smaller than measured before [Hei04]. Another result is the direction dependence of the damping. It has been measured that the difference of the damping is changed by more than 42% when rotating the applied field by 45° from [1-10] to [100].With SQUID we measured a saturation magnetization of a 40nm thick NiMnSb layer as 4µB. NiMnSb layers on InP(111)B substrate where also measured with FMR with a surprising result. These layers not only showed a decreasing in the anisotropy field with increasing thickness but also an uniaxial anisotropy. This behaviour can be explained with defects on these samples. With an AFM triangle-like defects were measured. These defects originated from the buffer layer and influenced the magnetic properties. Another part of this work is dedicated to the behaviour of NiMnSb at temperatures around 80K. With our samples, no phase transition can be observed in the data of the Hall, anomalous Hall term and resistivity. The last part of this work discusses different spintronic devices build with our NiMnSb layers. In a first device the magnetization acts on the current. This Giant Magneto Resistance (GMR) device consisted of InP:S(001) - 180nm undoped (In,Ga)As - 40nm NiMnSb - 10nm Cu - 6nm NiFe - 10nm Ru in current perpendicular to plane (CPP) geometry. We received a Magneto-Resistance-Ratio of 3.4%. In a second device the current acts on the magnetization and makes use of the spin torque phenomena. This so called Spin Torque Oscillator (STO) emitted frequencies in the GHz range (13.94GHz - 14.1GHz). The last fabricated device is based on the magnetic vortex phenomena. For switching the core polarity the gyrotropic frequencies f + = 254MHz f − = 217MHz and a total static magnetic field of only mµ0H = 65mT were necessary. The reversal efficiency has been determined as better than 99% [Lou09]. KW - Nickelverbindungen KW - Manganverbindungen KW - Molekularstrahlepitaxie KW - Röntgenbeugung KW - NiMnSb KW - Molecular beam epitxy KW - XRD KW - NiMnSb KW - Röntgendiffraktometrie KW - MBE Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72276 ER - TY - THES A1 - Schafferhans, Julia T1 - Investigation of defect states in organic semiconductors: Towards long term stable materials for organic photovoltaics T1 - Untersuchung elektronischer Störstellen in organischen Halbleitern: Auf dem Weg zu langzeitstabilen Materialien für die organische Photovoltaik N2 - In this work, the trap states in the conjugated polymer P3HT, often used as electron donor in organic bulk heterojunction solar cells, three commonly used fullerene based electron acceptors and P3HT:PC61BM blends were investigated. Furthermore, the trap states in the blend were compared with these of the pure materials. Concerning the lifetime of organic solar cells the influence of oxygen on P3HT and P3HT:PC61BM blends was studied. The experimental techniques used to investigate the trap states in the organic semiconductors were (fractional) thermally stimulated current (TSC) and current based deep level transient spectroscopy (Q-DLTS). Fractional TSC measurements on P3HT diodes revealed a quasi-continuous trap distribution. The distribution suggested two different traps in P3HT with approximately Gaussian energy distributions and maxima at about 50 meV and 105 meV. Thereby, the former was attributed to the tail states within the regular Gaussian density of states due to the low activation energy. The latter, deeper traps, however, exhibited a strong dependence on oxygen. Exposure of the P3HT diodes to oxygen, ambient air and synthetic (dry) air all revealed an increase of the deeper traps density with exposure time in the same manner. While the lower limit of the trap density in non aged P3HT samples was in the range of (1.0 − 1.2)×10^22 m^−3, it was more than doubled after an exposure of 50 h to air. An increase of the trap density with oxygen exposure time was also seen in the Q-DLTS measurements accompanied with an increase of the temperature dependence of the emission rates, indicating an enhanced formation of deeper traps. Due to the raise in density of the deeper traps, the charge carrier mobility in P3HT significantly decreased, as revealed by photo-CELIV measurements, resulting in a loss in mobility of about two orders of magnitude after 100 h exposure to synthetic air. The increased trap density was attributed to p-doping of P3HT by the transfer of an electron to adsorbed oxygen. This effect was partially reversible by applying vacuum to the sample for several hours or, more significantly, by a thermal treatment of the devices in nitrogen atmosphere. The trap states in the methanofullerenes PC61BM, bisPC61BM and PC71BM were investigated by TSC measurements. PC61BM yielded a broad quasi-continuous trap distribution with the maximum of the distribution at about 75 meV. The comparison of the TSC spectra of the three methanofullerenes exhibited significant differences in the trap states with higher activation energies of the most prominent traps in bisPC61BM and PC71BM compared to PC61BM. This probably originates from the different isomers bisPC61BM and PC71BM consist of. Each of the isomers yields different LUMO energies, where the lower ones can act as traps. The lower limit of the trap density of all of the three investigated fullerene derivatives exhibited values in the order of 10^22 m^−3, with the highest for bisPC61BM and the lowest for PC61BM. By applying fractional TSC measurements on P3HT:PC61BM solar cells, it was shown that the trap distribution in the blend is a superposition of the traps in pure P3HT and PC61BM and additional deeper traps in the range of about 250 meV to 400 meV. The origin of these additional traps, which can not be related to the pure materials, was attributed to a higher disorder in the blend and P3HT/PC61BM interfaces. This conclusion was supported by standard TSC and Q-DLTS measurements performed on pristine and annealed P3HT:PC61BM blends, exhibiting a higher ratio of the deep traps in the pristine samples. The lower limit of the trap density of the investigated annealed solar cells was in the range of (6−8)×10^22 m^−3, which was considerably higher than in the pure materials. The influence of oxygen on P3HT:PC61BM solar cells was investigated by exposure of the devices to synthetic air under specific conditions. Exposure of the solar cells to oxygen in the dark resulted in a strong decrease in the power conversion efficiency of 60 % within 120 h, which was only caused by a loss in short-circuit current. Simultaneous illumination of the solar cells during oxygen exposure strongly accelerated the degradation, resulting in an efficiency loss of 30 % within only 3 h. Thereby, short-circuit current, open-circuit voltage and fill factor all decreased in the same manner. TSC measurements revealed an increase of the density of deeper traps for both degradation conditions, which resulted in a decrease of the mobility, as investigated by CELIV measurements. However, these effects were less pronounced than in pure P3HT. Furthermore, an increase of the equilibrium charge carrier density with degradation time was observed, which was attributed to oxygen doping of P3HT. With the aid of macroscopic simulations, it was shown that the doping of the solar cells is the origin of the loss in short-circuit current for both degradation conditions. N2 - In der vorliegenden Arbeit wurden die elektronischen Störstellen in dem konjugierten Polymer P3HT, welches häufig als Elektronendonator in organischen Mischabsorbersolarzellen verwendet wird, in drei auf Fullerenen basierenden Elektronenakzeptoren und im P3HT:PC61BM Gemisch untersucht. Des Weiteren wurden die Störstellen im Gemisch mit denen der reinen Materialien verglichen. Im Hinblick auf die Lebensdauer organischer Solarzellen wurde der Einfluss von Sauerstoff auf P3HT und das P3HT:PC61BM Gemisch untersucht. Die verwendeten Methoden zur Untersuchung der Störstellen waren (fraktionierte) thermisch stimulierte Ströme (TSC) und strombasierte transiente Störstellenspektroskopie (Q-DLTS). Fraktionierte TSC Messungen an P3HT Dioden ergaben eine quasi-kontinuierliche Störstellenverteilung. Die Verteilung lies darauf schließen, dass in P3HT zwei verschiedene Störstellen mit jeweils annähernd gaußförmiger energetischer Verteilung vorliegen, deren Maxima Aktivierungsenergien von 50 meV und 105 meV besitzen. Erstere wurde dabei den Ausläufern der regulären gaußförmigen DOS zugewiesen. Die tiefere Störstelle wies eine starke Abhängigkeit von Sauerstoffexposition auf. Das gezielte Aussetzten von P3HT Dioden an Sauerstoff, ergab eine Zunahme in der Dichte der tieferen Störstellen mit zunehmender Expositionszeit. Während die untere Abschätzung der Störstellendichte für ungealterte P3HT Proben im Bereich von (1.0 − 1.2)x10^22 m^−3 lag, hat sich diese nach 50 Std. an Luft mehr als verdoppelt. Eine Zunahme der Störstellendichte durch Sauerstoffexposition wurde ebenfalls mit Q-DLTS Messungen beobachtet. Die Zunahme der Störstellenkonzentration führte zu einer signifikanten Abnahme der Ladungsträgerbeweglichkeit, wie mittels photo-CELIV Messungen gezeigt wurde. Die Beweglichkeitsabnahme betrug dabei etwa zwei Größenordnungen nach 100 Std. Exposition an synthetischer Luft. Die erhöhte Störstellendichte wurde der p-Dotierung des Polymers zugeschrieben, welche durch Elektronentransfer von P3HT auf angelagerten Sauerstoff hervorgerufen wird. Dieser Effekt war teilweise reversibel, u.a. durch Tempern der Proben in Stickstoffatmosphäre. Die Störstellen in den Methanofullerenen PC61BM, bisPC61BM und PC71BM wurden mittels TSC Messungen untersucht. Dabei ergaben sich wesentliche Unterschiede in den Störstellenspektren, mit höheren Aktivierungsenergien der ausgeprägtesten Störstellen in bisPC61BM und PC71BM verglichen mit PC61BM. Dies ist auf die verschiedenen Isomere, aus denen bisPC61BM und PC71BM bestehen, zurückzuführen. Jedes der Isomere besitzt verschiedene LUMO Niveaus, wobei die tiefer liegenden als Störstellen fungieren können. Die untere Abschätzung der Störstellendichte aller drei untersuchten Methanofullerene lag in der Größenordnung von 10^22 m^−3, mit der höchsten Störstellenkonzentration für bisPC61BM und der niedrigsten für PC61BM. Mittels fraktionierter TSC Messungen an P3HT:PC61BM Solarzellen wurde gezeigt, dass die Störstellenverteilung im Gemisch eine Überlagerung der Störstellen der Einzelmaterialien und zusätzlicher tiefer gelegener Ladungsträgerfallen mit Aktivierungsenergien von etwa 250 meV bis 400 meV ist. Diese zusätzlichen Störstellen wurden der höheren Unordnung im Gemisch und P3HT/PC61BM Grenzflächen zugeschrieben. Diese Folgerung wurde durch TSC und DLTS Messungen gestützt, welche an ungetemperten und getemperten P3HT/PC61BM Gemischen durchgeführt wurden und einen erhöhten Anteil tiefer Störstellen in der ungetemperten Solarzelle darlegten. Die untere Abschätzung der Störstellendichte lag für die untersuchten getemperten Solarzellen im Bereich von (6 − 8)x10^22 m^−3 und somit deutlich höher als in den Einzelmaterialien. Der Einfluss von Sauerstoff auf P3HT:PC61BM Solarzellen wurde durch gezielte Exposition der Proben an synthetischer Luft untersucht. Die Exposition der Solarzellen an synthetischer Luft im Dunklen resultierte in einer starken Abnahme der Solarzelleneffizienz von 60 % innerhalb von 120 Std., was alleine von der Abnahme des Kurzschlussstroms herrührte. Gleichzeitige Beleuchtung der Solarzellen während der Sauerstoffexposition führte zu einer starken Beschleunigung des Effizienzverlustes. Hierbei nahmen Kurzschlussstrom, Leerlaufspannung und Füllfaktor gleichsam ab. TSC Messungen zeigten eine Zunahme in der Konzentration der tieferen Störstellen für beide Degradationsbedingungen, was zu einer Abnahme der Ladungsträgerbeweglichkeit führte, wie mittels CELIV Messungen gezeigt wurde. Jedoch waren diese beiden Effekte weniger ausgeprägt als in reinem P3HT. Des Weiteren wurde eine Zunahme der Gleichgewichtsladungsträgerkonzentration mit zunehmender Degradationszeit beobachtet, was auf Sauerstoffdotierung des P3HT zurückgeführt wurde. Unter Zuhilfenahme makroskopischer Simulationen konnte gezeigt werden, dass die Dotierung der Solarzellen die Ursache für die Abnahme des Kurzschlussstroms ist. KW - Organischer Halbleiter KW - Störstellenverteilung KW - Degradation KW - TSC KW - P3HT KW - Fullerenderivate KW - Polymere KW - Organische Solarzelle KW - DLTS KW - organic solar cells KW - trap distribution KW - organic semiconductors KW - methanofullerenes KW - conjugated polymers Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57669 ER - TY - THES A1 - Riegler, Andreas T1 - Ferromagnetic resonance study of the Half-Heusler alloy NiMnSb : The benefit of using NiMnSb as a ferromagnetic layer in pseudo-spin-valve based spin-torque oscillators T1 - Ferromagnetische Resonanz Studie der Halb-Heusler Legierung NiMnSb N2 - Seit der Entdeckung des Spin-Torque durch Berger und Slonczewsky im Jahre 1996 gewann dieser Effekt immer mehr an Einfluss in dem Gebiet der Spintronic. Dies geschah besonders durch den Einfluss des Spin-Torque auf die Informationsspeicher und Kommunikationstechnologien (z.B. die Möglichkeit einen magnetischen Zustand eines Speicherelementes mit Hilfe von Strom und nicht wie bisher durch das Anlegen eines magnetischen Feldes zu ändern, oder die Realisierung eines hochfrequenten Spin-Torque-Oszillator (STO). Aufgrund des direkten Zusammenhangs zwischen der Dämpfung in Ferromagneten und der kritischen Stromdichte, die nötig ist um ein Spin-Ventil zu schalten oder ein Präzidieren der Magnetisierung zu induzieren, wurde die Forschung an Ferromagneten mit geringer Dämpfung zunehmend forciert. In dieser Arbeit werden Studien der ferromagnetischen Resonanz (FMR) von NiMnSb Schichten und Transportmessungen an NiMnSb basierten Spin-Ventilen präsentiert. Das Halbmetall NiMnSb ist mit einer theoretischen 100%igen Spinpolarisation prädestiniert für die Verwendung in GMR Elementen. Neben der theoretisch vorhergesagten hohen Spinpolarisation zeigen die durchgeführten FMR Messungen einen überaus geringen Dämpfungsfaktor für dieses Material. Dieser liegt in der Größenordnung von wenigen 10-3. Somit ist die Dämpfung in NiMnSb um den Faktor zwei geringer als in Permalloy und gut vergleichbar mit epitaktisch gewachsenen Eisen-Schichten. Neben den guten Dämpfungseigenschaften zeigen jedoch theoretische Modelle den Verlust der 100%igen Spinpolarisation durch das Brechen der Translationssymmetrie an Grenzflächen und das Kollabieren der Aufspaltung im Minoritäts-Spin-Band. Da ein Wachstum in (111) Richtung diesen Prozess entgegen wirken kann, werden in dieser Arbeit zudem auf (111)(In,Ga)As gewachsene NiMnSb Schichten mittels FMR untersucht. Die Messungen an diesen Proben zeigen, im Vergleich zu (001) orientierten Schichten, eine erhöhte Dämpfung. Zudem kann bei diesen Schichten eine schichtdickenabhängige uni-direktionale magnetische Anisotropie gemessen werden. Im Hinblick auf den möglichen industriellen Einsatz in Speicherelementen werden überdies Messungen an Sub-Mikrometer großen NiMnSb Elementen auf (001) orientierten Substraten präsentiert. Die Elemente wurden mittels Elektronenstrahllithographie hergestellt und mittels FMR vermessen. Auch die so prozessierten Schichten zeigen einen Dämpfungsfaktor im unteren 10-3 Bereich. Das Auftreten von magnetostatischen Moden in den Messungen ist ein weiterer indirekter Nachweis der hohen Qualität der NiMnSb-Schichten. Im Jahre 2001 wurde von Mizukamie und seinen Kollegen eine dickenabhängige Erhöhung der Gilbertdämpfung bei, mit Metallen bedeckten, Permalloy-Schichten beobachtet. Im Jahr darauf wurde von Tserkovnyak, Brataas und Bauer eine Theorie erarbeitet die dieses Phänomen auf ein Pumpen von Spins aus dem Ferromagneten in die Metalschicht zurückführt. Aus diesem Grund werden Messungen von NiMnSb Schichten, die mit verschiedenen Metallen und Isolatoren in-situ vor Oxidation geschützt wurden, präsentiert. Nach diesen materialspezifischen Voruntersuchungen werden auf NiMnSb und Permalloy basierte Pseudo-Spin-Ventile unter Verwendung eines selbst ausrichtenden lithographischen Prozesses hergestellt. Transportmessungen an den Proben zeigen ein GMRVerhältnis von 3,4% bei Raumtemperatur und fast das doppelte bei tiefen Temperaturen. Diese sind sehr gut vergleichbar mit den besten veröffentlichten GMR-Verhältnissen für Einzelschichtsysteme. Überdies kann in den Experimenten eine viel versprechend geringe kritische Stromdichte, die nötig ist, um die magnetische Orientierung zu ändern, gemessen werden. Diese ist vergleichbar mit kritischen Stromdichten aktuellster metallbasierter GMR-Elemente oder auf dem Tunneleffekt basierenden Spin-Ventilen. Das eigentliche Potential der auf NiMnSb basierenden Spin-Ventile wird erst ersichtlich wenn diese als STO zum Emittieren hochfrequenter, durchstimmbarer und schmalbandiger elektromagnetischer Wellen verwendet werden. Auf Heusler basierende STO zeigen einen überdurchschnittlich hohen q-Faktor von 4180, sogar im Betrieb ohne extern angelegtes Magnetfeld. Dieser ist um mehr als eine Größenordnung höher als der höchste veröffentliche q-Faktor eines ohne externes Feld arbeitenden STO. Während die Heusler basierten STO ebenso wie alle anderen STO unter einer geringen Ausgangsleistung leiden, machen die Maßstäbe im Sub-Mikrometer Bereich eine On-Chip Herstellung möglich. Somit kann durch ein Parallelschalten von gekoppelten Oszillatoren eine Erhöhung der Ausgangsleistung erzielt werden. N2 - Since the discovery of spin torque in 1996, independently by Berger and Slonczewski, and given its potential impact on information storage and communication technologies, (e.g. through the possibility of switching the magnetic configuration of a bit by current instead of a magnetic field, or the realization of high frequency spin torque oscillators (STO), this effect has been an important field of spintronics research. One aspect of this research focuses on ferromagnets with low damping. The lower the damping in a ferromagnet, the lower the critical current that is needed to induce switching of a spin valve or induce precession of its magnetization. In this thesis ferromagnetic resonance (FMR) studies of NiMnSb layers are presented along with experimental studies on various spin-torque (ST) devices using NiMnSb. NiMnSb, when crystallized in the half-Heusler structure, is a half-metal which is predicted to have 100% spin polarization, a consideration which further increases its potential as a candidate for memory devices based on the giant magnetoresistance (GMR) effect. The FMR measurements show an outstandingly low damping factor for NiMnSb, in low 10-3 range. This is about a factor of two lower than permalloy and well comparable to lowest damping for iron grown by molecular beam epitaxy (MBE). According to theory the 100% spin polarization properties of the bulk disappear at interfaces where the break in translational symmetry causes the gap in the minority spin band to collapse but can remain in other crystal symmetries such as (111). Consequently NiMnSb layers on (111)(In,Ga)As buffer are characterized in respect of anisotropies and damping. The FMR measurements on these samples indicates a higher damping that for the 001 samples, and a thickness dependent uniaxial in-plane anisotropy. Investigations of the material for device use is pursued by considering sub-micrometer sized elements of NiMnSb on 001 substrates, which were fabricated by electron-beam lithography and measured by ferromagnetic resonance. The damping remains in the low 10-3 range as determined directly by extracting the Gilbert damping from the line width. Additionally magnetostatic modes are observed in arrays of elements, which is further evidence of high material quality of the samples. By sputtering various metals on top of the NiMnSb, spin pumping from the ferromagnet into the non-magnetic layer is investigated. After these material investigations, pseudo-spin-valves using NiMnSb as one of the ferromagnet, in combination with Permalloy were fabricating using a self-aligned lithography process. These samples show a GMR ratio of 3.4% at room temperature and almost double at low temperature, comparing favourably to the best single stack GMR structures reported to date. Moreover, current induced switching measurements show promisingly low current densities are necessary to change the magnetic orientation of the free layer. These current densities compete with state-of-the-art GMR devices for metal based structures and almost with tunnel junction devices. The true potential of these devices however comes to light when they are operated as spin torque oscillators to emit high frequency, tunable, narrow spectrum electromagnetic waves. These Heusler based STOs show an outstanding q-factor of 4180, even when operating in the absence of an external field, a value which bests the highest value in the literature by more than an order of magnitude. While these devices currently still suffer from the same limited output power as all STO reported to date, their sub-micron lateral dimensions make the fabrication of an on-chip array of coupled oscillators, which is a promising path forward towards industrially relevant output power. KW - Nickelverbindungen KW - Manganverbindungen KW - Antimonide KW - Riesenmagnetowiderstand KW - GMR KW - ferromagnetische Resonanz KW - NiMnSb KW - Spin Drehmoment KW - NiMnSb KW - STO KW - GMR KW - ferromagnetic resonance KW - NiMnSb KW - spin torque Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66305 ER - TY - THES A1 - Issing, Sven T1 - Correlation between Lattice Dynamics and Magnetism in the Multiferroic Manganites T1 - Korrelation von Kristallgitterdynamik und Magnetismus in den Multiferroischen Manganaten N2 - In this thesis a systematic analysis of the correlation effects between lattice dynamics and magnetism in the Multiferroic Manganites RMnO3 with Pnma structure was conducted. For this task, Raman and FT-IR Spectroscopy were employed for an investigation of all optically accessible lattice vibrations, i.e. phonons. To study the correlation effects as well as their specific connections to symmetry and compositional properties of the Multiferroic Manganites, the polarisation and temperature dependence of the phonons were considered explicitly. In combination with lattice dynamical calculations based on Density Functional Theory, two coupling effects - Spin-Phonon Coupling and Electromagnon-Phonon Coupling - were systematically analysed. N2 - Grundlegendes Verständnis der physikalischen Zusammenhänge innerhalb multifunktionaler Materialien im Hinblick auf spätere potentielle Anwendungen ist eines der Hauptziele der heutigen Forschungsbemühungen in der Festkörperphysik. Im Wesentlichen geht es dabei um das Ausnutzen von intrinsischen Kopplungseffekten, um zusätzliche Funktionalität im Vergleich zur heutigen auf Miniaturisierung von halbleiterbasierten Bauelementen aufbauenden Informationstechnologie zu erreichen. Die vorgelegte Dissertation zielt in dies em Themengebiet auf die systematische Untersuchung der Kopplungseffekte zwischen Kristallgitterdynamik und Magnetismus in den multiferroischen Manganaten ab. Konkret geht es um das Modelsystem der multiferroischen Selten-Erd-Manganate RMnO3 mit orthorhombischer Pnma-Struktur. Die zu diesem Zweck verwendeten experimentellen Techniken waren Raman und Fourier-Transform Infrarot (FT-IR) Spektroskopie, mit deren Hilfe alle optisch aktiven Kristallgitterschwingungen dieser Systeme spektroskopiert werden konnten. Zur Untersuchung der Kopplungseffekte wurden die spektroskopischen Experimente polarisationssensitiv und unter Variation der Probentemperatur durchgeführt, um insbesondere Renormalisierungseffekte der Gitterschwingungen im Temperaturbereich magnetischer Phasenübergänge nachweisen zu können. In Verbindung mit gitterdynamischen Rechnungen, die auf der Dichtefunktionaltheorie (DFT) basieren, wurden zwei Kopplungseffekte systematisch untersucht: Spin-Phonon Kopplung (SPC) sowie Elektromagnon-Phonon Kopplung (EMPC). KW - FT-IR-Spektroskopie KW - Multiferroikum KW - Magnetoelektrischer Effekt KW - Manganate KW - Magneto-Elektrischer Effekt KW - Raman-Spektroskopie KW - Manganate KW - Dichtefunktionalformalismus KW - Magneto-Electric Effect KW - Multiferroics Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66283 ER - TY - THES A1 - Baumann, Andreas T1 - Charge Transport and Recombination Dynamics in Organic Bulk Heterojunction Solar Cells T1 - Ladungstransport und Rekombination in organischen Heterogemisch-Solarzellen N2 - The charge transport in disordered organic bulk heterojunction (BHJ) solar cells is a crucial process affecting the power conversion efficiency (PCE) of the solar cell. With the need of synthesizing new materials for improving the power conversion efficiency of those cells it is important to study not only the photophysical but also the electrical properties of the new material classes. Thereby, the experimental techniques need to be applicable to operating solar cells. In this work, the conventional methods of transient photoconductivity (also known as "Time-of-Flight" (TOF)), as well as the transient charge extraction technique of "Charge Carrier Extraction by Linearly Increasing Voltage" (CELIV) are performed on different organic blend compositions. Especially with the latter it is feasible to study the dynamics, i.e. charge transport and charge carrier recombination, in bulk heterojunction (BHJ) solar cells with active layer thicknesses of 100-200 nm. For a well performing organic BHJ solar cells the morphology is the most crucial parameter finding a trade-off between an efficient photogeneration of charge carriers and the transport of the latter to the electrodes. Besides the morphology, the nature of energetic disorder of the active material blend and its influence on the dynamics are discussed extensively in this work. Thereby, the material system of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PC61BM) serves mainly as a reference material system. New promising donor or acceptor materials and their potential for application in organic photovoltaics are studied in view of charge dynamics and compared with the reference system. With the need for commercialization of organic solar cells the question of the impact of environmental conditions on the PCE of the solar cells raises. In this work, organic BHJ solar cells exposed to synthetic air for finite duration are studied in view of the charge carrier transport and recombination dynamics. Finally, within the framework of this work the technique of photo-CELIV is improved. With the modified technique it is now feasible to study the mobility and lifetime of charge carriers in organic solar cells under operating conditions. N2 - Der Ladungstransport in ungeordneten organischen "bulk heterojunction" (Heterogemisch, Abk.: BHJ) Solarzellen stellt einen kritischen Prozess dar, der den Wirkungsgrad wesentlich beeinflusst. Aufgrund der großen Nachfrage neuer, vielversprechender Materialien für die organische Photovoltaik, ist es um so wichtiger nicht nur ihre photophysikalischen sondern auch deren elektrischen Eigenschaften zu charakterisieren. Gerade letztere erfordern experimentelle Messmethoden, die an funktionsfähigen Solarzellen angewandt werden können. Zur experimentellen Untersuchung des Landungstransportes in organischen Solarzellen werden in dieser Arbeit die Methoden der transienten Photoleitfähigkeit, auch bekannt als "Time-of-Flight" (TOF), sowie die transiente Ladungsextraktionsmethode "Charge Carrier Extraction by Linearly Increasing Voltage'' (CELIV) verwendet. Gerade Letztere ermöglicht es an Dünnschichtsystemen von nur wenigen 100 nm, eine typische Schichtdicke bei organischen Solarzellen, den Ladungstransport aber auch die Rekombination von Elektronen und Löchern zu untersuchen. Entscheidend für eine vielversprechende funktionsfähige organische BHJ Solarzelle ist dabei eine günstige Morphologie, die eine effiziente Generation von Ladungsträger, sowie deren Abführung zu den Elektroden erlaubt. Dabei wird in dieser Arbeit der Einfluss der räumlichen, als auch der der energetischen Unordnung der photoaktiven Schicht auf den Ladungstransport und der Rekombination der Ladungsträger untersucht. Das weit verbreitete Materialsystem bestehend aus Poly-3-(Hexyl) Thiophen (P3HT) und [6,6]-Phenyl C61 Buttersäure Methylester (PC61BM) dient dabei als Donator-Akzeptor Referenzsystem. Neuartige Donator- bzw. Akzeptor-Materialien und deren Potential für künftige Anwendungen in der organischen Photovoltaik werden hinsichtlich ihrer Ladungsträgereigenschaften mit dem Referenzmaterialsystem verglichen. Im Zuge der Kommerzialisierung organischer Solarzellen bzw. Solarmodulen ist die Anfälligkeit der Zellen gegenüber äußeren Umwelteinflüssen, wie Sauerstoff oder Wasser, in den Vordergrund des wissenschaftlichen Interesses gerückt. Dementsprechend wird in dieser Arbeit auch der Einfluss von synthetischer Luft auf den Transport und die Rekombination von Ladungsträgern und somit auf den Wirkungsgrad der Solarzelle untersucht und diskutiert. Schließlich wird im Rahmen dieser Arbeit eine Erweiterung der photo-CELIV Messmethode vorgestellt. Diese ermöglicht es die Lebensdauer und den Transport von Ladungsträgern in organischen Dünnschicht-Solarzellen unter realen Arbeitsbedingungen, d.h. Beleuchtung unter einer Sonne bei Raumtemperatur, zu bestimmen. KW - Photovoltaik KW - Ladungstransport KW - Rekombination KW - organische Photovoltaik KW - Ladungsträgerrekombination KW - photo-CELIV KW - organic solar cells KW - organic semicondcutors KW - recombination KW - photo-CELIV Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-64915 ER - TY - JOUR A1 - Weise, Gesa A1 - Basse-Lüsebrink, Thomas C. A1 - Kleinschnitz, Christoph A1 - Kampf, Thomas A1 - Jakob, Peter M. A1 - Stoll, Guido T1 - In Vivo Imaging of Stepwise Vessel Occlusion in Cerebral Photothrombosis of Mice by \(^{19}\)F MRI JF - PLoS One N2 - Background \(^{19}\)F magnetic resonance imaging (MRI) was recently introduced as a promising technique for in vivo cell tracking. In the present study we compared \(^{19}\)F MRI with iron-enhanced MRI in mice with photothrombosis (PT) at 7 Tesla. PT represents a model of focal cerebral ischemia exhibiting acute vessel occlusion and delayed neuroinflammation. Methods/Principal Findings Perfluorocarbons (PFC) or superparamagnetic iron oxide particles (SPIO) were injected intravenously at different time points after photothrombotic infarction. While administration of PFC directly after PT induction led to a strong \(^{19}\)F signal throughout the entire lesion, two hours delayed application resulted in a rim-like \(^{19}\)F signal at the outer edge of the lesion. These findings closely resembled the distribution of signal loss on T2-weighted MRI seen after SPIO injection reflecting intravascular accumulation of iron particles trapped in vessel thrombi as confirmed histologically. By sequential administration of two chemically shifted PFC compounds 0 and 2 hours after illumination the different spatial distribution of the \(^{19}\)F markers (infarct core/rim) could be visualized in the same animal. When PFC were applied at day 6 the fluorine marker was only detected after long acquisition times ex vivo. SPIO-enhanced MRI showed slight signal loss in vivo which was much more prominent ex vivo indicative for neuroinflammation at this late lesion stage. Conclusion Our study shows that vessel occlusion can be followed in vivo by \(^{19}\)F and SPIO-enhanced high-field MRI while in vivo imaging of neuroinflammation remains challenging. The timing of contrast agent application was the major determinant of the underlying processes depicted by both imaging techniques. Importantly, sequential application of different PFC compounds allowed depiction of ongoing vessel occlusion from the core to the margin of the ischemic lesions in a single MRI measurement. KW - in vivo imaging KW - magnetic resonance imaging KW - macrophages KW - emulsions KW - infarction KW - fluorine KW - prefrontal cortex KW - developmental signaling Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137792 VL - 6 IS - 12 ER - TY - THES A1 - Hammer, Maria T1 - Charge transport in disordered organic and nanocrystalline inorganic semiconductors - Effect of charge carrier density variation T1 - Ladungstransport in ungeordneten organischen und nanokristallinen anorganischen Halbleitern - Auswirkung der Ladungsträgerdichtevariation N2 - The charge transport properties of disordered organic and nanocrystalline inorganic semiconductors as well as their combinations have been investigated in regard to the charge carrier density employing field-effect-transistor structures. The results were discussed in the framework of different theoretical models. In organic semiconductors the presence of positional and energetic disorder determines the transport of charges through the respective thin films and interfaces. The electronic disorder is characterized by statistically distributed and localized transport sites which were shown to form a Gaussian density of states. In this electronic environment the charge transport occurs via thermally activated hopping between the localized states and therefore depends on the temperature and the local electric field. Particularly, a dependence of the carrier mobility on the charge carrier concentration is observed due to filling of tail states. Inorganic nanocrystalline semiconductors, however, are expected to present a different electronic structure: Within the volume of a nanocrystallite the semiconductor is assumed to reflect the electronic properties of the crystalline bulk material. However, the outer shell is characterized by a relatively large density of surface states and correspondingly bending of the energy bands, which creates an energetic barrier between the adjacent particles. In a nanocrystalline thin film this characteristic can be rate-limiting for the inter-particle carrier transport as reflected by reduced charge carrier mobility. The effective barrier height can be reduced by controlled doping of the nanocrystals which results in improved majority carrier transfer rates across the barrier. However, doping results in the simultaneous increase of the defect density and consequently to enhanced limitation of the mobility due to charge carrier scattering. In the experiments, thin films of commercially available p- and n-type organic semiconductors (P3HT, and two derivatives of PCBM) were investigated in field-effect transistor structures. Further, sol-gel synthesized n-type nanocrystalline-ZnO (nc-ZnO) with varied doping concentration (agent: aluminum Al$^{3+}$) was introduced in order to establish an alternative way of customizing the charge transport properties of the neat material and in combination with the organic polymer semiconductor P3HT. N2 - Der Ladungstransport in ungeordneten organischen und nanokristallinen anorganischen Halb\-leitern sowie in deren Mischsystemen wurde im Hinblick auf die Ladungsträgerdichte in Feldeffekttransistoren untersucht. Die Ergebnisse wurden anhand verschiedener theoretischer Modelle diskutiert. In organischen Halbleitern bestimmt die räumliche und energetische Unordnung den Ladungstransport durch die jeweiligen dünnen Schichten und Grenzflächen. Dabei ist die elektronische Unordnung charakterisiert durch statistisch verteilte und lokalisierte Transportzustände, die eine Gaußsche Zustandsdichte zeigen. In dieser elektronischen Umgebung ist der Ladungstransport durch thermisch aktiviertes Hüpfen zwischen lokalisierten Zuständen gekennzeichnet und hängt demzufolge von der Temperatur und dem lokalen elektrischen Feld ab. Insbesondere wurde eine Abhängigkeit der Mobilität von der Ladungsträgerdichte beobachtet, was eine Folge des Füllens energetisch tief liegender Zustände ist. Anorganische nanokristalline Halbleiter zeigen eine andere elektronische Struktur: Im Volumen des Nanokristalls kann man vereinfacht die elektrischen Eigenschaften des jeweiligen Einkristalls annehmen. Jedoch ist die äußere Hülle durch eine relativ hohe Dichte an Oberflächenzuständen und einer damit einhergehenden Energiebandverbiegung charakterisiert. Daher ergibt sich eine Energiebarriere zwischen den angrenzenden Kristalliten. In nanokristallinen dünnen Schichten kann diese Eigenschaft den Ladungstransport limitieren, was durch eine verringerte Beweglichkeit widergespiegelt wird. Die effektive Barrierenhöhe kann durch kontrollierte Dotierung der Nanokristalle vermindert werden, was die Transferraten über die Barriere erhöht. Jedoch führt Dotierung gleichzeitig zu einer Zunahme der Defektdichte und folglich zu einer weiteren Minderung der Beweglichkeit durch Streuprozesse der Ladungsträger. In den hier gezeigten Experimenten wurden dünne Schichten bestehend aus kommerziell erhältlichen organischen p- und n-Halbleitern (P3HT und zwei Derivate von PCBM) in Feldeffekttransistorstrukturen untersucht. Des weiteren wurde Sol--Gel synthetisiertes n-leitendes nanokristallines ZnO (nc-ZnO) mit variiertem Aluminium Dotierlevel eingeführt, was einen alternativen Weg aufzeigt, die Eigenschaften des Ladungstransports sowohl im reinen Material als auch in dessen Kombination mit dem organischen Polymer P3HT einzustellen. KW - Ladungstransport KW - Halbleiterschicht KW - organische ungeordnete Halbleiter KW - anorganische geordnete Halbleiter KW - Ambipolarer Ladungstransport KW - electronic transport in nanocrystalline materials KW - organic-inorganic hybrid nanostructures KW - charge carrier transport in organic thin films Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55188 ER - TY - THES A1 - Frey, Alexander T1 - Spin-Dependent Tunneling and Heterovalent Heterointerface Effects in Diluted Magnetic II-VI Semiconductor Heterostructures T1 - Spinabhängiges Tunneln und heterovalente Heterogrenzflächen in verdünnt magnetischen II-VI Halbleiter Heterostrukturen N2 - The contribution of the present thesis consists of three parts. They are centered around investigating certain semiconductor heterointerfaces relevant to spin injection, exploring novel, diluted magnetic single barrier tunneling structures, and further developing diluted magnetic II-VI resonant tunneling diodes. N2 - Der Beitrag der vorliegenden Arbeit besteht aus drei Teilen. Diese beschäftigen sich mit der Untersuchung bestimmter, für Spininjektion relevanter, Halbleiter Heterogrenzflächen, mit neuartigen, verdünnt magnetischen Einzelbarrieren-Tunnelstrukturen, sowie mit der Weiterentwicklung von verdünnt magnetischen Resonanz-Tunneldioden. KW - Zwei-Sechs-Halbleiter KW - Heterostruktur KW - Spintronik KW - II-VI Semiconductors KW - Diluted magnetic semiconductors KW - resonant tunneling KW - spintronics KW - heterovalent heterointerfaces KW - Spin KW - Halbleiter KW - Molekularstrahlepitaxie KW - Resonanz-Tunneleffekt KW - Tunneleffekt KW - Röntgendiffraktometrie KW - Magnetowiderstand Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78133 ER - TY - JOUR A1 - Wolter, Steve A1 - Endesfelder, Ulrike A1 - Linde, Sebastian van de A1 - Heilemann, Mike A1 - Sauer, Markus T1 - Measuring localization performance of super-resolution algorithms on very active samples JF - Optics Express N2 - Super-resolution fluorescence imaging based on inglemolecule localization relies critically on the availability of efficient processing algorithms to distinguish, identify, and localize emissions of single fluorophores. In multiple current applications, such as threedimensional, time-resolved or cluster imaging, high densities of fluorophore emissions are common. Here, we provide an analytic tool to test the performance and quality of localization microscopy algorithms and demonstrate that common algorithms encounter difficulties for samples with high fluorophore density. We demonstrate that, for typical single-molecule localization microscopy methods such as dSTORM and the commonly used rapidSTORM scheme, computational precision limits the acceptable density of concurrently active fluorophores to 0.6 per square micrometer and that the number of successfully localized fluorophores per frame is limited to 0.2 per square micrometer. Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-85936 ER -