TY - THES A1 - Baur, Florentin Philipp T1 - Establishment of a 3D tumour model and targeted therapy of BRAF-mutant colorectal cancer T1 - Entwicklung eines 3D Tumormodells und zielgerichtete Behandlung von BRAF-mutiertem kolorektalen Karzinom N2 - Cancer remains after cardiovascular diseases the leading cause of death worldwide and an estimated 8.2 million people died of it in 2012. By 2030, 13 million cancer deaths are expected due to the growth and ageing of the population. Hereof, colorectal cancer (CRC) is the third most common cancer in men and the second in women with a wide geographical variation across the world. Usually, CRC begins as a non-cancerous growth leading to an adenomatous polyp, or adenoma, arising from glandular cells. Since research has brought about better understanding of the mechanisms of cancer development, novel treatments such as targeted therapy have emerged in the past decades. Despite that, up to 95% of anticancer drugs tested in clinical phase I trials do not attain a market authorisation and hence these high attrition rates remain a key challenge for the pharmaceutical industry, making drug development processes enormously costly and inefficient. Therefore, new preclinical in vitro models which can predict drug responses in vivo more precisely are urgently needed. Tissue engineering not only provides the possibility of creating artificial three-dimensional (3D) in vitro tissues, such as functional organs, but also enables the investigation of drug responses in pathological tissue models, that is, in 3D cancer models which are superior to conventional two-dimensional (2D) cell cultures on petri dishes and can overcome the limitations of animal models, thereby reducing the need for preclinical in vivo models. In this thesis, novel 3D CRC models on the basis of a decellularised intestinal matrix were established. In the first part, it could be shown that the cell line SW480 exhibited different characteristics when grown in a 3D environment from those in conventional 2D culture. While the cells showed a mesenchymal phenotype in 2D culture, they displayed a more pronounced epithelial character in the 3D model. By adding stromal cells (fibroblasts), the cancer cells changed their growth pattern and built tumour-like structures together with the fibroblasts, thereby remodelling the natural mucosal structures of the scaffold. Additionally, the established 3D tumour model was used as a test system for treatment with standard chemotherapeutic 5-fluorouracil (5-FU). The second part of the thesis focused on the establishment of a 3D in vitro test system for targeted therapy. The US Food and Drug Administration has already approved of a number of drugs for targeted therapy of specific types of cancer. For instance, the small molecule vemurafenib (PLX4032, Zelboraf™) which demonstrated impressive response rates of 50–80% in melanoma patients with a mutation of the rapidly accelerated fibrosarcoma oncogene type B (BRAF) kinase which belongs to the mitogen active protein kinase (MAPK) signalling pathway. However, only 5% of CRC patients harbouring the same BRAF mutation respond to treatment with vemurafenib. An explanation for this unresponsiveness could be a feedback activation of the upstream EGFR, reactivating the MAPK pathway which sustains a proliferative signalling. To test this hypothesis, the two early passage cell lines HROC24 and HROC87, both presenting the mutation BRAF V600E but differing in other mutations, were used and their drug response to vemurafenib and/or gefitinib was assessed in conventional 2D cell culture and compared to the more advanced 3D model. Under 3D culture conditions, both cell lines showed a reduction of the proliferation rate only in the combination therapy approach. Furthermore, no significant differences between the various treatment approaches and the untreated control regarding apoptosis rate and viability for both cell lines could be found in the 3D tumour model which conferred an enhanced chemoresistance to the cancer cells. Because of the observed unresponsiveness to BRAF inhibition by vemurafenib as can be seen in the clinic for patients with BRAF mutations in CRC, the cell line HROC87 was used for further xenografting experiments and analysis of activation changes in the MAPK signalling pathway. It could be shown that the cells presented a reactivation of Akt in the 3D model when treated with both inhibitors, suggesting an escape mechanism for apoptosis which was not present in cells cultured under conventional 2D conditions. Moreover, the cells exhibited an activation of the hepatocyte growth factor receptor (HGFR, c-Met) in 2D and 3D culture, but this was not detectable in the xenograft model. This shows the limitations of in vivo models. The results suggest another feedback activation loop than that to the EGFR which might not primarily be involved in the resistance mechanism. This reflects the before mentioned high attrition rates in the preclinical drug testing. N2 - Krebs ist nach Herz- und Kreislauferkrankungen die führende Todesursache weltweit und 2012 starben daran geschätzt 8,2 Millionen Menschen. Für das Jahr 2030 werden 13 Millionen Krebstote erwartet, was auf das Bevölkerungswachstum und deren Überalterung zurückzuführen ist. Dabei ist das kolorektale Karzinom (engl. colorectal cancer, CRC) der dritthäufigste Krebs bei Männern und der zweithäufigste bei Frauen. Für gewöhnlich entwickelt sich CRC aus einem nicht-kanzerösen Wachstum, das zu einem adenomatösen Polyp bzw. Adenom führt, welches aus Drüsenzellen hervorgeht. Da die Forschung in den vergangenen Jahrzehnten ein besseres Verständnis für die Mechanistik der Krebsentstehung hervorgebracht hat, entstanden neuartige Behandlungsformen, wie die zielgerichtete Krebstherapie. Hohe Versagensraten, welche den Medikamentenentwicklungsprozess sehr kostenaufwendig und ineffizient machen, bleiben eine entscheidende Herausforderung für die pharmazeutische Industrie. Deshalb werden dringend neue präklinische in vitro Modelle, die bessere in vivo Wirkungsvorhersagen liefern, benötigt. Das Tissue Engineering bietet die Möglichkeit künstliche dreidimensionale (3D) in vitro Gewebe herzustellen, z.B. funktionelle Organe, aber es ermöglicht auch, die Reaktion auf ein Medikament in pathologischen Gewebemodellen, wie beispielsweise Krebsmodelle, zu untersuchen. Diese sind der konventionellen zweidimensionalen (2D) Zellkultur in Petrischalen überlegen und können die begrenzten Möglichkeiten von Tiermodellen erweitern, was zudem die Notwendigkeit für präklinische in vivo Modelle vermindert. In der vorliegenden Arbeit wurden neuartige 3D CRC Modelle auf Basis einer dezellularisierten intestinalen Matrix entwickelt. Im ersten Teil konnte gezeigt werden, dass die Zelllinie SW480 verschiedene Charakteristika bezüglich des Wachstums in der konventionellen 2D Zellkultur oder der 3D Umgebung aufwies. Im Gegensatz zu den mesenchymalen Eigenschaften der Zellen in der 2D Zellkultur, zeigten sie im 3D Modell einen betonteren epithelialen Charakter. Durch das Hinzufügen von Fibroblasten änderten die Krebszellen ihr Wachstumsverhalten und sie bildeten zusammen tumorartige Strukturen aus, wobei die natürlichen Strukturen der Darmmatrix, Krypten und Villi, umgebaut wurden. Zusätzlich wurde das entwickelte 3D Tumormodell als Testsystem für das Standardchemotherapeutikum 5-Fluorouracil (5-FU) herangezogen. Der zweite Teil der Dissertation konzentrierte sich auf die Entwicklung eines 3D in vitro Testsystems für die zielgerichtete Behandlung. Es gibt schon eine Reihe von der US Food and Drug Administration zugelassenen Medikamente für die zielgerichtete Behandlung spezifischer Tumorentitäten, wie z.B. Vemurafenib (PLX4032, Zelboraf™), das eindrucksvolle Ansprechraten von 50–80% bei Melanompatienten mit BRAF-Mutation erzielt. Trotzdem sprechen nur 5% der CRC-Patienten mit der gleichen BRAF-Mutation auf die Behandlung mit Vemurafenib an. Gründe für diese Unempfindlichkeit könnte eine Rückkoppelung zum aufwärtsgelegenen EGFR sein, der das Signal zur Proliferation aufrecht erhält. Um diese Hypothese zu überprüfen, wurden die zwei Zelllinien HROC24 und HROC87, die beide die BRAF V600E-Mutation tragen aber sich in anderen Mutationen unterscheiden, mit Vemurafenib und/oder Gefitinib behandelt und das Ansprechen auf die Substanzen in der herkömmlichen 2D Zellkultur sowie im fortschrittlicheren 3D Modell verglichen. In 3D Kulturbedingungen zeigten beide Zelllinien eine Senkung der Proliferation nur im Kombinationstherapie-Ansatz. Außerdem wurden bei den 3D Modellen keine signifikanten Unterschiede zwischen den verschiedenen Behandlungsansätzen und der unbehandelten Kontrolle, hinsichtlich der Apoptoserate und Viabilität, gefunden. Das deutet auf eine erhöhte Chemoresistenz der Krebszellen in der 3D Umgebung hin. Wegen der vorhandenen Unempfindlichkeit der Zelllinie HROC87 gegenüber der BRAF-Inhibierung mit Vemurafenib, wie es auch in der Klinik im Fall von Patienten mit BRAF-Mutation des CRC beobachtet werden kann, wurden diese Zellen für weitere Xenograft-Experimente und Analysen von Aktivierungsunterschieden im MAPK-Signaltransduktionsweg herangezogen. Weiterhin zeigten die Zellen eine Aktivierung des „hepatocyte growth factor receptor“ (HGFR, c-Met) in 2D und 3D Zellkultur, der jedoch nicht im Xenograft-Modell zu sehen war, was die limitierte Übertragbarkeit von Ergebnissen des Tiermodells auf den Menschen verdeutlicht. Dies spiegelt wiederum die obenstehend erwähnten hohen Versagensraten in der präklinischen Medikamententestung wider. Zusammengefasst kann das Tissue Engineering Möglichkeiten zur Herstellung und Entwicklung neuartiger 3D Testsysteme bieten, welche besser die in vivo Situation abbilden. Für eine Medikamententestung in Übereinstimmung mit personalisierter Medizin eröffnet das 3D Tumormodell vielversprechende Wege, welche in Zukunft das präklinische Screening verbessern sowie die hohen Versagensraten und Tierversuche vermindern könnten. KW - Dickdarmtumor KW - Therapie KW - BRAF-mutant KW - colorectal cancer KW - targeted therapy KW - 3D tumour model KW - BRAF-mutiert KW - kolorektales Karzinom KW - zielgerichtete Behandlung KW - 3D Tumormodell KW - In vitro KW - 3D KW - tumour Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174129 ER - TY - JOUR A1 - Khare, Siddhartha A1 - Latifi, Hooman A1 - Rossi, Sergio A1 - Ghosh, Sanjay Kumar T1 - Fractional cover mapping of invasive plant species by combining very high-resolution stereo and multi-sensor multispectral imageries JF - Forests N2 - Invasive plant species are major threats to biodiversity. They can be identified and monitored by means of high spatial resolution remote sensing imagery. This study aimed to test the potential of multiple very high-resolution (VHR) optical multispectral and stereo imageries (VHRSI) at spatial resolutions of 1.5 and 5 m to quantify the presence of the invasive lantana (Lantana camara L.) and predict its distribution at large spatial scale using medium-resolution fractional cover analysis. We created initial training data for fractional cover analysis by classifying smaller extent VHR data (SPOT-6 and RapidEye) along with three dimensional (3D) VHRSI derived digital surface model (DSM) datasets. We modelled the statistical relationship between fractional cover and spectral reflectance for a VHR subset of the study area located in the Himalayan region of India, and finally predicted the fractional cover of lantana based on the spectral reflectance of Landsat-8 imagery of a larger spatial extent. We classified SPOT-6 and RapidEye data and used the outputs as training data to create continuous field layers of Landsat-8 imagery. The area outside the overlapping region was predicted by fractional cover analysis due to the larger extent of Landsat-8 imagery compared with VHR datasets. Results showed clear discrimination of understory lantana from upperstory vegetation with 87.38% (for SPOT-6), and 85.27% (for RapidEye) overall accuracy due to the presence of additional VHRSI derived DSM information. Independent validation for lantana fractional cover estimated root-mean-square errors (RMSE) of 11.8% (for RapidEye) and 7.22% (for SPOT-6), and R\(^2\) values of 0.85 and 0.92 for RapidEye (5 m) and SPOT-6 (1.5 m), respectively. Results suggested an increase in predictive accuracy of lantana within forest areas along with increase in the spatial resolution for the same Landsat-8 imagery. The variance explained at 1.5 m spatial resolution to predict lantana was 64.37%, whereas it decreased by up to 37.96% in the case of 5 m spatial resolution data. This study revealed the high potential of combining small extent VHR and VHRSI- derived 3D optical data with larger extent, freely available satellite data for identification and mapping of invasive species in mountainous forests and remote regions. KW - Lantana camara KW - SPOT-6 KW - RapidEye KW - 3D KW - DSM KW - Fractional cover analysis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197250 SN - 1999-4907 VL - 10 IS - 7 ER - TY - THES A1 - Proppert, Sven Martin T1 - Design, implementation and characterization of a microscope capable of three-dimensional two color super-resolution fluorescence imaging T1 - Design, Implementierung und Charakterisierung eines Mikroskops für dreidimensionale zwei Farben superhochauflösende Fluoreszenz-Bildgebung N2 - This thesis reviews the fundamentals of three-dimensional super-resolution localization imaging. In order to infer the axial coordinate of the emission of single fluorophores, the point spread function is engineered following a technique usually referred to as astigmatic imaging by the introduction of a cylindrical lens to the detection path of a microscope. After giving a short introduction to optics and localization microscopy, I outline sources of aberrations as frequently encountered in 3D-localization microscopy and will discuss their respective impact on the precision and accuracy of the localization process. With the knowledge from these considerations, experiments were designed and conducted to verify the validity of the conclusions and to demonstrate the abilities of the proposed microscope to resolve biological structures in the three spatial dimensions. Additionally, it is demonstrated that measurements of huge volumes with virtually no aberrations is in principle feasible. During the course of this thesis, a new method was introduced for inferring axial coordinates. This interpolation method based on cubic B-splines shows superior performance in the calibration of a microscope and the evaluation of subsequent measurement and will therefore be used and explained in this work. Finally, this work is also meant to give future students some guidance for entering the field of 3D localization microscopy and therefore, detailed protocols are provided covering the specific aspects of two color 3D localization imaging. N2 - In dieser Arbeit werden die Grundlagen der dreidimensionalen hochauflösenden Lokalisationsmikroskopie erarbeitet und daraus Spezifikationen für ein geeignetes Mikroskop abgeleitet. Zur Gewinnung der axialen Koordinate der Emission einzelner Farbstoffe wird die Punktspreizfunktion in der Detektion astigmatisch mithilfe einer zylindrischen Linse verändert. Nach einer kurzen Einleitung in die Grundzüge der Optik und der Lokalisationsmikroskopie werden die Ursachen für typische Aberrationen besprochen, wie sie in der 3D-Lokalisationsmikroskopie häufig auftreten. Weiterhin wird der Einfluss dieser Aberrationen auf die erreichbare Präzision und Exaktheit des Lokalisationsprozesses behandelt. Mit dem Wissen aus diesen Überlegungen wurden Experimente entworfen und durchgeführt um die getroffenen Schlussfolgerungen zu validieren und zu demonstrieren, dass das vorgeschlagene Mikroskop dazu in der Lage ist, biologische Strukturen in den drei räumlichen Dimensionen aufzulösen. Weiterhin wird gezeigt, dass beinahe aberrationsfreie Mikroskopie großer Volumina prinzipiell möglich ist. Während der Arbeit an dieser Promotion wurde eine neue Methode zur Gewinnung der axialen Koordinaten eingeführt. Diese auf kubischen B-splines basierende Interpolationsmethode stellte sich als anderen Routinen überlegen in der Kalibration eines Mikroskops und der anschließenden Auswertung von Messungen heraus. Deshalb wird dieses Verfahren in der vorliegenden Arbeit verwendet und erklärt. Da diese Doktorarbeit auch den Anspruch hat, zukünftigen Studenten den Einstieg in die hochauflösende 3D Mikroskopie zu erleichtern, werden abschließend detaillierte Protokolle für spezifische Aspekte der zwei Farben 3D Lokalisationsmikroskopie zur Verfügung gestellt. KW - Dimension 3 KW - aberration KW - Einzelmolekülmikroskopie KW - single molecule microscopy KW - 3D KW - super-resolution KW - Mikroskopie KW - Hochauflösendes Verfahren KW - Aberration Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107905 ER - TY - THES A1 - Schneider, Sonja Jasmin Maria T1 - Basic Dental Analytical Tools for a Comparative Study of Applied Photoacoustics, Cone-Beam Computed Tomography, and Micro-Computed Tomography T1 - Grundlegende dentale analytische Untersuchungsmethoden für eine Vergleichsstudie zwischen angewendeter Photoakustik, Digitaler Volumentomographie und Micro-Computertomographie N2 - In this in-vitro study, teeth were imaged using photoacoustic tomography (PAT), cone-beam computed tomography (CBCT), and micro-computed tomography (µ-CT). The study had aim: to identify the best wavelength for PAT images to determine the accuracy of the three imaging methods, and to determine whether PAT images of teeth can achieve acceptable reconstruction quality. N2 - In dieser in-vitro Studie wurden 19 Unterkieferfrontzähne mittels Photoakustik (PA), Digitaler Volumentomographie (DVT) und Micro-Computertomographie (µ-CT) gescannt, um dreidimensionale Rekonstruktionen zu erstellen und zu vergleichen. Das Ziel der Studie war es, die Wellenlänge zu bestimmen bei der sich die Zähne mittels Photoakustik am besten darstellen lassen, um anschließend zu ermitteln, ob mittels Photoakustik akzeptable dreidimensionale Rekonstruktionen der Zähne erzeugt werden können. Die Photoakustik Bilder mit den besten Kontrastverhältnissen konnten bei einer Wellenlänge von 680 nm erzeugt werden. Diese Wellenlänge ermöglicht es zwischen Schmelz, Dentin, Wurzelzement und Pulpa zu unterschieden. Bezüglich der durchschnittlichen Flächenabweichung der Wurzeloberfläche und dem Gesamtvolumen der Zahnwurzel konnten keine signifikanten Unterschiede zwischen der „PA–µ-CT“ Gruppe und der“ DVT–µ-CT“ Gruppe festgestellt werden. Daraus kann geschlossen werden, dass die 3D-Rekonstruktion basierend auf in-vitro Photoakustik Aufnahmen bereits jetzt schon eine akzeptable Qualität erreicht. KW - cone-beam computed tomography KW - tooth KW - 3D KW - photoacoustic KW - micro-computed-tomography KW - accuracy Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-274635 ER -