TY - JOUR A1 - Wohlfart, Jonas A1 - Holzgrabe, Ulrike T1 - Analysis of histamine and sisomicin in gentamicin: search for the causative agents of adverse effects JF - Archiv der Pharmazie N2 - In 1998, the aminoglycoside antibiotic gentamicin sulfate caused several cases of deaths in the United States, after the switch from twice- to once-daily application. Endotoxins were discussed as the cause for the adverse effects and sisomicin was identified as the lead impurity; batches containing sisomicin were contaminated with more impurities and were responsible for the fatalities. In 2016, anaphylactic reactions in horses, and later in humans with one fatality, were observed after application of gentamicin sulfate contaminated with histamine. To determine whether histamine was responsible for the 1990s death cases as well, histamine was quantified by means of liquid chromatography–tandem mass spectrometry (LC-MS/MS) in 30 samples of gentamicin sulfate analyzed in previous studies. Furthermore, a relative quantification of sisomicin was performed to check for a correlation between histamine and the lead impurity. A maximum amount of 11.52 ppm histamine was detected, which is below the limit for anaphylactic reactions of 16 ppm, and no correlation of the two impurities was observed. However, the European Medicines Agency recommends a stricter limit with regard to the maximum single dose of gentamicin sulfate to reach a greater gap between the maximum histamine exposition of 4.3 µg and the quantity known to cause hypotension of 7 µg. The low amounts of histamine and the fact that there is no connection with the contamination with sisomicin showed that histamine was not the cause for the death cases in the United States in 1998, and endotoxins remain the most probable explanation. KW - chemistry KW - sisomicin KW - drug impurities KW - gentamicin sulfate KW - histamine KW - LC-MS/MS Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256596 VL - 354 IS - 12 ER - TY - JOUR A1 - Pawellek, Ruben A1 - Krmar, Jovana A1 - Leistner, Adrian A1 - Djajić, Nevena A1 - Otašević, Biljana A1 - Protić, Ana A1 - Holzgrabe, Ulrike T1 - Charged aerosol detector response modeling for fatty acids based on experimental settings and molecular features: a machine learning approach JF - Journal of Cheminformatics N2 - The charged aerosol detector (CAD) is the latest representative of aerosol-based detectors that generate a response independent of the analytes' chemical structure. This study was aimed at accurately predicting the CAD response of homologous fatty acids under varying experimental conditions. Fatty acids from C12 to C18 were used as model substances due to semivolatile characterics that caused non-uniform CAD behaviour. Considering both experimental conditions and molecular descriptors, a mixed quantitative structure-property relationship (QSPR) modeling was performed using Gradient Boosted Trees (GBT). The ensemble of 10 decisions trees (learning rate set at 0.55, the maximal depth set at 5, and the sample rate set at 1.0) was able to explain approximately 99% (Q\(^2\): 0.987, RMSE: 0.051) of the observed variance in CAD responses. Validation using an external test compound confirmed the high predictive ability of the model established (R-2: 0.990, RMSEP: 0.050). With respect to the intrinsic attribute selection strategy, GBT used almost all independent variables during model building. Finally, it attributed the highest importance to the power function value, the flow rate of the mobile phase, evaporation temperature, the content of the organic solvent in the mobile phase and the molecular descriptors such as molecular weight (MW), Radial Distribution Function-080/weighted by mass (RDF080m) and average coefficient of the last eigenvector from distance/detour matrix (Ve2_D/Dt). The identification of the factors most relevant to the CAD responsiveness has contributed to a better understanding of the underlying mechanisms of signal generation. An increased CAD response that was obtained for acetone as organic modifier demonstrated its potential to replace the more expensive and environmentally harmful acetonitrile. KW - High-performance liquid chromatography (HPLC) KW - Charged aerosol detector (CAD) KW - Gradient boosted trees (GBT) KW - Quantitative structure-property relationship modeling (QSPR) KW - Fatty acids Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-261618 VL - 13 IS - 1 ER - TY - JOUR A1 - Leistner, Adrian A1 - Holzgrabe, Ulrike T1 - Impurity Profiling of Baclofen Using Gradient HPLC–UV Method JF - Chromatographia N2 - The GABA\(_{B}\) receptor agonist baclofen is a medication commonly used for the treatment of muscle spasticity. It is an amino acid and related to the neurotransmitter GABA. In this study, we developed a new, gradient high-performance liquid chromatography (HPLC) method for the impurity assessment of baclofen, which is appropriate for pharmacopoeial purposes. Since the impurities related to the synthesis pathway are acids, zwitterionic, or neutral, the method development is challenging. However, the separation of all components was achieved on a C18 stationary phase using a water–acetonitrile–trifluoroacetic acid gradient. A limit of detection (LOD) of at least 0.02% was registered for all specified impurities. Additionally, CAD detection was performed to detect potential impurities lacking off a chromophore. The baclofen batches analyzed are far more pure than expected. All impurities were found below the specification limit, and thus, they can be regarded as unspecified. Moreover, the required runtime could be significantly reduced compared to the current USP or Ph. Eur. method. KW - GABA\(_{B}\) KW - impurity profiling KW - baclofen KW - gradient HPLC–UV KW - CAD detection KW - pharmaceutical analysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268921 SN - 1612-1112 VL - 84 IS - 10 ER - TY - JOUR A1 - Urlaub, Jonas A1 - Kaiser, Reinhard P. A1 - Scherf‐Clavel, Oliver A1 - Bolm, Carsten A1 - Holzgrabe, Ulrike T1 - Investigation of isomerization of dexibuprofen in a ball mill using chiral capillary electrophoresis JF - Electrophoresis N2 - Besides the racemate, the S‐enantiomer of ibuprofen (Ibu) is used for the treatment of inflammation and pain. Since the configurational stability of S‐Ibu in solid state is of interest, it was studied by means of ball milling experiments. For the evaluation of the enantiomeric composition, a chiral CE method was developed and validated according to the ICH guideline Q2(R1). The addition of Mg\(^{2+}\), Ca\(^{2+}\), or Zn\(^{2+}\) ions to the background electrolyte (BGE) was found to improve Ibu enantioresolution. Chiral separation of Ibu enantiomers was achieved on a 60.2 cm (50.0 cm effective length) x 75 μm fused‐silica capillary using a background electrolyte (BGE) composed of 50 mM sodium acetate, 10 mM magnesium acetate tetrahydrate, and 35 mM heptakis‐(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (TM‐β‐CD) as chiral selector. The quantification of R‐Ibu in the mixture was performed using the normalization procedure. Linearity was evaluated in the range of 0.68–5.49% R‐Ibu (R\(^{2}\) = 0.999), recovery was found to range between 97 and 103%, the RSD of intra‐ and interday precision below 2.5%, and the limit of quantification for R‐ in S‐Ibu was calculated to be 0.21% (extrapolated) and 0.15% (dilution of racemic ibuprofen), respectively. Isomerization of S‐Ibu was observed under basic conditions by applying long milling times and high milling frequencies. KW - capillary electrophoresis KW - chiral separation KW - Ibuprofen KW - isomerization KW - validation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-225852 VL - 42 IS - 17-18 SP - 1790 EP - 1799 ER - TY - JOUR A1 - Seitzer, Moritz A1 - Klapper, Sylvia A1 - Mazigo, Humphrey D. A1 - Holzgrabe, Ulrike A1 - Mueller, Andreas T1 - Quality and composition of Albendazole, Mebendazole and Praziquantel available in Burkina Faso, Côte d’Ivoire, Ghana and Tanzania JF - PLoS Neglected Tropical Diseases N2 - Background Even though the international combat against Neglected Tropical Diseases such as schistosomiasis or soil-transmitted helminthiases depends on reliable therapeutics, anthelminthic pharmacovigilance has been neglected on many national African drug markets. Therefore, quality and composition of Albendazole, Mebendazole and Praziquantel locally collected in Burkina Faso, Côte d’Ivoire, Ghana and Tanzania were analysed. Methods Samples of 88 different batches were obtained from randomly selected facilities. Sampling took place in Northwest Tanzania, Western Burkina Faso, Southeast Côte d’Ivoire and Southwest Ghana. Visual examination of both packaging and samples was performed according to the WHO ‘Be Aware’ tool. Products were then screened with the GPHF Minilab, consisting of tests of mass uniformity, disintegration times and thin-layer chromatography (TLC). Confirmatory tests were performed according to international pharmacopoeiae, applying assays for dissolution profiles and high-performance liquid chromatography (HPLC). Findings Despite minor irregularities, appearance of the products did not hint at falsified medicines. However, 19.6% of the brands collected in Ghana and Tanzania were not officially licensed for sale. Mass uniformity was confirmed in 53 out of 58 brands of tablets. 41 out of 56 products passed disintegration times; 10 out of the 15 failing products did not disintegrate at all. Evaluating TLC results, only 4 out of 83 batches narrowly missed specification limits, 18 batches slightly exceeded them. Not more than 46.3% (31 / 67) of the tablets assayed passed the respective pharmaceutical criteria for dissolution. HPLC findings confirmed TLC results despite shifted specification limits: 10 out of 83 tested batches contained less than 90%, none exceeded 110%. Conclusion In the four study countries, no falsified anthelminthic medicine was encountered. The active pharmaceutical ingredient was not found to either exceed or fall below specification limits. Galenic characteristics however, especially dissolution profiles, revealed great deficits. KW - thin-layer chromatography KW - high performance liquid chromatography KW - Schistosomiasis KW - acetonitrile KW - acetic acid KW - Tanzania KW - veterinarians KW - veterinary medicine Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-270434 VL - 15 IS - 1 ER - TY - JOUR A1 - Masota, Nelson E. A1 - Vogg, Gerd A1 - Ohlsen, Knut A1 - Holzgrabe, Ulrike T1 - Reproducibility challenges in the search for antibacterial compounds from nature JF - PLoS One N2 - Background Reproducibility of reported antibacterial activities of plant extracts has long remained questionable. Although plant-related factors should be well considered in serious pharmacognostic research, they are often not addressed in many research papers. Here we highlight the challenges in reproducing antibacterial activities of plant extracts. Methods Plants with reported antibacterial activities of interest were obtained from a literature review. Antibacterial activities against Escherichia coli and Klebsiella pneumoniae were tested using extracts’ solutions in 10% DMSO and acetone. Compositions of working solutions from both solvents were established using LC-MS analysis. Moreover, the availability of details likely to affect reproducibility was evaluated in articles which reported antibacterial activities of studied plants. Results Inhibition of bacterial growth at MIC of 256–1024 μg/mL was observed in only 15.4% of identical plant species. These values were 4–16-fold higher than those reported earlier. Further, 18.2% of related plant species had MICs of 128–256 μg/mL. Besides, 29.2% and 95.8% of the extracts were soluble to sparingly soluble in 10% DMSO and acetone, respectively. Extracts’ solutions in both solvents showed similar qualitative compositions, with differing quantities of corresponding phytochemicals. Details regarding seasons and growth state at collection were missing in 65% and 95% of evaluated articles, respectively. Likewise, solvents used to dissolve the extracts were lacking in 30% of the articles, whereas 40% of them used unidentified bacterial isolates. Conclusion Reproducibility of previously reported activities from plants’ extracts is a multi-factorial aspect. Thus, collective approaches are necessary in addressing the highlighted challenges. KW - acetones KW - antibacterials KW - leaves KW - phytochemicals KW - solubility KW - plants KW - liquid chromatography-mass spectrometry KW - ethanol Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260239 VL - 16 IS - 7 ER - TY - JOUR A1 - Becht, Alexander A1 - Schollmayer, Curd A1 - Monakhova, Yulia A1 - Holzgrabe, Ulrike T1 - Tracing the origin of paracetamol tablets by near-infrared, mid-infrared, and nuclear magnetic resonance spectroscopy using principal component analysis and linear discriminant analysis JF - Analytical and Bioanalytical Chemistry N2 - Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6%/99.6% and 98.7/100% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer. KW - \(^{1}\)HNMR KW - IR KW - manufacturer KW - linear discriminant analysis KW - principal component analysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-265400 VL - 413 IS - 11 ER -