TY - THES A1 - Wagner, Wolfgang T1 - Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides T1 - Supramolekulare Blockcopolymere von Perylenbisimiden mittels saat-induzierter lebender supramolekularer Polymerisation N2 - The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5. The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry. The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations. Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding. The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity. In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers. Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks. In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization. Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process. Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks. In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials. N2 - Das Forschungsgebiet der supramolekularen Polymerisation hat sich in den letzten Jahrzehnten sehr rasch entwickelt, zumal da supramolekulare Polymere eine Fülle an Anwendungsmöglichkeiten in der organischen Elektronik, der Biologie oder als Funktionsmaterialen bieten (Kapitel 2.1). Während frühere Studien den Fokus auf die Untersuchung der Thermodynamik der supramolekularen Polymerisation gelegt haben (Kapitel 2.2), hat sich das akademische Interesse in jüngster Zeit dahingehend verschoben, Einblicke in kinetisch kontrollierte Selbstassemblierungsprozesse zu erhalten, um neuartige Strukturen mit faszinierenden Eigenschaften zu generieren (Kapitel 2.3). Im Zuge dieser Entwicklung wurde das Konzept der Saat-induzierten und der lebenden supramolekularen Polymerisation entwickelt, welche die Bildung von supramolekularen Polymeren mit geringer Polydispersität in kinetisch kontrollierten Prozessen ermöglichen (Kapitel 2.4). Des Weiteren wurden neue Strategien zu Erzeugung von Nanostrukturen entwickelt, die aus verschiedenen Komponenten aufgebaut sind und somit neue komplexe Strukturmotive zeigen. Eine Einteilung dieser supramolekularen Copolymere anhand einiger Literaturbeispiele und eine kurze Übersicht über die bisherigen Methoden, solche supramolekularen Strukturen zu erzeugen ist in Kapitel 2.5 dargestellt. Das Ziel der Doktorarbeit war die nicht-kovalente Synthese von erstrebenswerten supramolekularen Blockcopolymeren mittels lebender Saat-induzierter Polymerisation und zu erforschen, wie die molekulare Form der Monomerbausteine die supramolekulare Copolymerisation beeinflusst. Basierend auf der Molekülstruktur des zuvor untersuchten Perylenbisimidfarbstoffes H-PBI wurden in dieser Arbeit eine Reihe von neuen Perylenbisimiden mit identischen Amid-Seitengruppen in Imidposition und unterschiedlicher Art oder Anzahl von Buchtsubstituenten synthetisiert und charakterisiert. Die neuen Perylenbisimide wurden erfolgreich in drei Stufen durch neu entwickelte Syntheserouten erhalten, wobei von den jeweiligen Brom substituierten Perylen-3,4:9,10-tetracarbonsäuretetrabutylestern oder von N,N‘ Dicyclohexyl-1,7-dibromperylen-3,4:9,10-tetracarbonsäurebisimid ausgegangen wurde. Alle Zielverbindungen wurden im letzten Syntheseschritt mittels einer Imidisierungsreaktion der jeweiligen Perylenbisanhydridvorstufen mit N (2-Aminoethyl)-3,4,5-tris(dodecyloxy)benzamid erhalten und mittels 1H- und 13C NMR-Spektroskopie sowie mit hochauflösender Massenspektrometrie charakterisiert. Die Variation der Buchtsubstituenten hat einen starken Einfluss auf die optischen Eigenschaften der Perylenbisimidmonomere, was mittels UV/vis- und Fluoreszenzspektroskopie untersucht wurde. Die ansteigende Zahl der Methoxysubstituenten verursacht zum Beispiel eine Rotverschiebung der Absorptionsmaxima, welche mit einer Abnahme der Extinktionskoeffizienten einhergeht, und führt zu einem starken Anstieg der Fluoreszenzquantenausbeute. Außerdem wird auch die Molekülgeometrie der Perylenbisimide durch die Variation der Buchtsubstituenten beeinflusst. Mittels DFT-Rechnungen konnte gezeigt werden, dass eine Zunahme des sterischen Anspruchs der Buchtsubstituenten eine Vergrößerung des Torsionswinkels der Perylenbisimidkerne zur Folge hat. Als besonders geeignet für die im Rahmen dieser Arbeit anvisierten Studien erwies sich das mit zwei Methylgruppen in 1,7-Buchtposition substituierte MeO-PBI. Die Selbstassemblierung dieses 1,7-Dimethoxy-substituierten Perylenbisimid-Derivates wurde mit Hilfe von UV/vis-, Fluoreszenz- und FT-IR-Spektroskopie sowie mittels Rasterkraftmikroskopie detailliert analysiert (Kapitel 3). Diese Studien haben gezeigt, dass MeO-PBI in einem Lösungsmittelgemisch aus Methylcyclohexan und Toluol (2:1, v/v) in einem kinetisch kontrollierten Prozess durch schnelles Abkühlen der Monomerlösung von 90 auf 20 °C „off-pathway“ Nanopartikel ausbildet. Durch langsames Abkühlen der Monomerlösung entstehen hingegen fluoreszierende, J-aggregierte Nanofasern aufgrund von π-π-Wechselwirkungen und intermolekularen Wasserstoffbrückenbindungen. Die kinetisch metastabilen „off-pathway“ H-Aggregate können durch Zugabe einer polymeren J-Aggregat-Saat, welche durch eine Behandlung der polymeren Nanofasern mit Ultraschall gewonnen werden kann, in die thermodynamisch begünstigten J-Aggregate transformiert werden. Außerdem wurde der lebende Charakter dieser supramolekularen Saat-induzierten Polymerisation durch ein neu entworfenes multizyklisches Versuchsprotokoll nachgewiesen. Diese Experimente zur lebenden supramolekularen Polymerisation zeigen deutlich, dass der Polymerisationsprozess nur an den „aktiven“ Enden der polymeren Saat stattfinden kann und dass außerdem kaum Rekombinations- oder Kettenterminationsprozesse auftreten. Folglich ermöglicht die Methode der lebenden supramolekularen Polymerisation die Synthese von supramolekularen Polymeren mit kontrollierbarer Polymerlänge und geringer Polydispersität. In Kapitel 4 wird die Copolymerisation von MeO-PBI mit den strukturell ähnlichen 1,7 Dichlor- (Cl-PBI) und 1,7-Dimethylthiosubstituierten (MeS-PBI) Perylenbisimiden ausgeführt. Beide neuen Perylenbisimide bilden analog zu MeO-PBI „off-pathway“ Aggregate, die durch Saatzugabe in einem kinetisch kontrollierten Prozess in die thermodynamisch stabileren supramolekularen Polymere umgewandelt werden können. Die Stabilität der kinetisch gefangenen Aggregate von Cl-PBI und MeS-PBI ist jedoch verglichen mit den metastabilen Aggregaten von MeO-PBI deutlich geringer, da die π π Wechselwirkungen zwischen den molekularen Bausteinen aufgrund des vergrößerten Torsionswinkels der Peryleneinheiten stark reduziert sind. UV/vis-spektroskopische Studien zeigen, dass die Saat-induzierte Copolymerisation des kinetisch gefangenen Zustandes von MeO-PBI mit der Saat von Cl-PBI durch einen lebenden Kettenwachstumsprozess an den Polymerenden der Saat zur Ausbildung von neuartigen supramolekularen Blockcopolymeren mit A B A Blockstruktur führt. Die erzeugte A-B-A-Blockstruktur der erhaltenen Copolymere konnte eindeutig mittels Rasterkraftmikroskopie bestätigt werden, da die jeweiligen Polymerblöcke bestehend aus den einzelnen monomeren Einheiten anhand der Ganghöhe der helikalen Nanofasern unterschieden werden können. Ausführliche UV/vis- und Rasterkraftmikroskopiestudien haben außerdem demonstriert, dass, zum Beispiel durch Zugabe der Saat von MeO-PBI zu den kinetisch gefangenen Aggregaten von Cl PBI, Triblockcopolymere mit B-A-B-Blockstruktur in einer invertierten Saat-induzierten Zweikomponenten-Copolymerisation, erzeugt werden können. Dieser Wechsel der Blockstruktur kann nur durch perfekt abgestimmte Bedingungen für die Copolymerisation und bei übereinstimmender Molekülgeometrie der Monomereinheiten erreicht werden. Diese Studien zeigen erstmals, dass die Blockstruktur der supramolekularen Polymere durch das Versuchsprotokoll der lebenden supramolekularen Polymerisation variiert werden kann. Des Weiteren lieferten UV/vis-spektroskopische Untersuchungen der lebenden Copolymerisation von MeO-PBI und MeS-PBI ähnliche Ergebnisse, was darauf hindeutet, dass ebenfalls supramolekulare Blockcopolymere mit A-B-A- und B-A-B-Struktur gebildet werden können. Obwohl die einzelnen Polymerblöcke in diesem Fall wegen der identischen Helixganghöhe der Nanofasern nicht zugeordnet werden konnten, so zeigten diese Experimente doch, dass die Methode der Saat-induzierten lebenden Polymerisation nicht auf ein spezielles Paar von Monomerbausteinen limitiert ist. Im letzten Abschnitt der Doktorarbeit (Kapitel 5) wird eine systematische Studie der lebenden Zweikomponenten-Copolymerisation von Perylenbisimiden mit unterschiedlich sterisch anspruchsvollen Buchtsubstituenten dargestellt. Dementsprechend wurde eine Reihe von Perylenbisimiden mit identischen Amidseitenketten, aber unterschiedlicher Anzahl (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) oder Größe (EtO PBI, iPrO-PBI) der Alkoxybuchtsubstituenten untersucht. Die Molekülgeometrie der Monomereinheiten hat einen starken Einfluss auf das thermodynamisch und mehr noch auf das kinetisch kontrollierte Aggregationsverhalten in Lösungsmittelgemischen aus Methylcyclohexan und Toluol. Während die mono- und dialkoxysubstituierten Perylenbisimide kinetisch metastabile Zustände ausbilden, findet die Selbstassemblierung der tri- und tetramethoxysubstituierten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) vollständig unter thermodynamischer Kontrolle statt. Die zwei 1,7 alkoxysubstituierten Perylenbisimide (EtO-PBI, iPrO-PBI) bilden analog zu MeO PBI sowohl kinetische „off-pathway“ H-Aggregate als auch thermodynamisch begünstigte J Aggregate. Verglichen mit MeO-PBI ist jedoch die Stabilität der kinetisch metastabilen Zustände von EtO-PBI und iPrO-PBI viel geringer und die Umwandlung in die thermodynamisch stabileren Aggregate geschieht daher viel schneller. Das monomethoxysubstituierte Perylenbisimid-Derivat (1 MeO PBI) bildet im Gegensatz dazu kinetisch gefangene Monomere durch intramolekulare Wasserstoffbrücken-bindungen, welche sich durch Saat-induzierte Polymerisation in die thermodynamisch begünstigteren Nanofasern transformieren lassen. Die Saat-induzierte Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von MeO-PBI durch Saatzugabe der anderen Perylenbisimide der Reihe wurde mittels UV/vis-Spektroskopie und Rasterkraftmikroskopie analysiert. Diese Studien eröffneten, dass die Bildung von supramolekularen Blockcopolymeren nur für geometrisch passende Kombinationen der Perylenbisimide möglich ist. Dementsprechend führt die Saat-induzierte Polymerisation des kinetisch gefangenen Zustands von MeO-PBI mit den, laut DFT Rechnungen, strukturell ähnlichen Perylenbisimiden (EtO-PBI, iPrO-PBI) zur Bildung von A B A Blockcopolymeren, analog zu dem im Kapitel 4 beschriebenem Fall der Saat induzierten Copolymerisation mit Cl-PBI und MeS-PBI. Die Zugabe einer Saat der planaren Perylenbisimide (H-PBI, 1-MeO-PBI) oder der Perylenbisimide mit stark verdrehten Perylenkernen (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) zum kinetisch metastabilen Zustand von MeO-PBI führt dagegen nicht zur Bildung von Blockcopolymeren. Der Unterschied in der Molekülgeometrie dieser Monomerbausteine vermindert erheblich die Stärke der π π Wechselwirkungen zwischen den unterschiedlichen Perylenbisimiden und verhindert daher deren Copolymerisation. Die Studien zur Saat induzierten Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von 1-MeO-PBI mit den anderen Perylenbisimiden der Serie bestätigte weiterhin, dass eine genaue Übereinstimmung der molekularen Geometrie entscheidend für die Erzeugung von supramolekularen Blockcopolymeren ist. Durch Zugabe der Saat von H-PBI zum kinetisch metastabilen Zustand von 1-MeO-PBI konnten folglich supramolekulare Blockcopolymere generiert werden. Mittels DFT-Rechnungen wurde gezeigt, dass beide Perylenbisimide einen relativ planaren Perylenkern aufweisen, was zu sehr starken, nicht-kovalenten Wechselwirkungen zwischen diesen beiden Monomerbausteinen führt. Die übereinstimmende Geometrie beider Perylenbisimide ermöglicht auch die invertierte Saat-induzierte Copolymerisation des kinetisch gefangenen Zustands von H-PBI mit 1-MeO-PBISaat, was mit einem Wechsel der Blockstruktur des supramolekularen Blockcopolymers von A B A zu B A B einhergeht. Die Zugabe der Saat der mäßig (EtO-PBI, iPrO PBI) und stark verdrehten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) hat im Gegensatz dazu keinen Effekt auf den kinetisch gefangenen Zustand von 1-MeO-PBI, da die Copolymerisation dieser Perylenbisimide durch die Nichtübereinstimmung der Molekülgeometrie der Monomerbausteine verhindert wird. Abschließend lässt sich zusammenfassen, dass in dieser Arbeit die supramolekulare Polymerisation und Saat-induzierte Zweikomponenten-Copolymerisation einer Reihe von Perylenbisimidmonomeren untersucht worden ist. Die Studien haben demonstriert, dass die thermodynamisch und kinetisch kontrollierten Selbstassemblierungsprozesse durch subtile Änderungen der Monomerbausteine stark variiert werden können. Außerdem zeigen die Ergebnisse, dass die lebende supramolekulare Polymerisation eine sehr leistungsfähige Methode zur Erzeugung von neuartigen supramolekularen, polymeren Nanostrukturen mit kontrollierter Blockstruktur und Längenverteilung darstellt. Die Bildung dieser supramolekularen Blockcopolymere kann nur unter präziser kinetischer Kontrolle erreicht werden und ist durch die Komplementarität der einzelnen molekularen Komponenten stark beeinflusst. Diese aufschlussreichen Studien bilden möglicherweise die Grundlage für ein rationaleres Design neuer Monomerbausteine zur nicht-kovalenten Synthese von hochkomplexen, supramolekularen Strukturen mit potentiell einzigartigen Eigenschaften für mögliche Anwendungen, beispielsweise als neuartige Funktionsmaterialien. KW - Supramolekulare Chemie KW - Perylenbisdicarboximide KW - Lebende Polymerisation KW - Aggregation KW - Supramolecular Block Copolymers KW - Perylenbisimides KW - Kinetic Self-assembly KW - Living Polymerisation KW - Organische Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193004 ER - TY - JOUR A1 - Nguyen, Duy Ba A1 - Kersten, Clauss A1 - Senmao, Cao A1 - Vahid, Naeimi A1 - Kuenzer, Claudia A1 - Wagner, Wolfgang T1 - Mapping Rice Seasonality in the Mekong Delta with Multi-Year Envisat ASAR WSM Data JF - Remote Sensing N2 - Rice is the most important food crop in Asia, and the timely mapping and monitoring of paddy rice fields subsequently emerged as an important task in the context of food security and modelling of greenhouse gas emissions. Rice growth has a distinct influence on Synthetic Aperture Radar (SAR) backscatter images, and time-series analysis of C-band images has been successfully employed to map rice fields. The poor data availability on regional scales is a major drawback of this method. We devised an approach to classify paddy rice with the use of all available Envisat ASAR WSM (Advanced Synthetic Aperture Radar Wide Swath Mode) data for our study area, the Mekong Delta in Vietnam. We used regression-based incidence angle normalization and temporal averaging to combine acquisitions from multiple tracks and years. A crop phenology-based classifier has been applied to this time series to detect single-, double- and triple-cropped rice areas (one to three harvests per year), as well as dates and lengths of growing seasons. Our classification has an overall accuracy of 85.3% and a kappa coefficient of 0.74 compared to a reference dataset and correlates highly with official rice area statistics at the provincial level (R-2 of 0.98). SAR-based time-series analysis allows accurate mapping and monitoring of rice areas even under adverse atmospheric conditions. KW - band SAR data KW - SAR KW - rice KW - WSM KW - ASAR KW - Envisat KW - MODIS image KW - Southeast China KW - polarimetric SAR KW - cropping systems KW - time-series KW - paddy rice KW - radar KW - paddy KW - rice mapping KW - Vietnam KW - Mekong-Delta KW - synthetic aperture radar KW - multitemporal ALOS/PALSAR imagery KW - soil moisture retrieval Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137554 VL - 7 IS - 12 ER - TY - JOUR A1 - Naeimi, Vahid A1 - Leinenkugel, Patrick A1 - Sabel, Daniel A1 - Wagner, Wolfgang A1 - Apel, Heiko A1 - Kuenzer, Claudia T1 - Evaluation of Soil Moisture Retrieval from the ERS and Metop Scatterometers in the Lower Mekong Basin JF - Remote Sensing N2 - The natural environment and livelihoods in the Lower Mekong Basin (LMB) are significantly affected by the annual hydrological cycle. Monitoring of soil moisture as a key variable in the hydrological cycle is of great interest in a number of Hydrological and agricultural applications. In this study we evaluated the quality and spatiotemporal variability of the soil moisture product retrieved from C-band scatterometers data across the LMB sub-catchments. The soil moisture retrieval algorithm showed reasonable performance in most areas of the LMB with the exception of a few sub-catchments in the eastern parts of Laos, where the land cover is characterized by dense vegetation. The best performance of the retrieval algorithm was obtained in agricultural regions. Comparison of the available in situ evaporation data in the LMB and the Basin Water Index (BWI), an indicator of the basin soil moisture condition, showed significant negative correlations up to R = −0.85. The inter-annual variation of the calculated BWI was also found corresponding to the reported extreme hydro-meteorological events in the Mekong region. The retrieved soil moisture data show high correlation (up to R = 0.92) with monthly anomalies of precipitation in non-irrigated regions. In general, the seasonal variability of soil moisture in the LMB was well captured by the retrieval method. The results of analysis also showed significant correlation between El Niño events and the monthly BWI anomaly measurements particularly for the month May with the maximum correlation of R = 0.88. KW - soil moisture KW - scatterometer KW - ASCAT KW - Mekong Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130480 VL - 5 IS - 4 ER -