TY - THES A1 - Sánchez Naya, Roberto T1 - Synthesis and Characterization of Dye-Containing Covalent Organic Frameworks T1 - Synthese und Charakterisierung von farbstoffhaltigen kovalenten organischen Netzwerken N2 - The present thesis adress the synthesis and characterization of novel COFs that contain dye molecules as integral components of the organic backbone. These chromophore-containing frameworks open new research lines in the field and call for the exploration of applications such as catalysis, sensing, or in optoelectronic devices. Initially, the fabrication of organic-inorganic composites by the growth of DPP TAPP COF around functionalized iron oxide nanoparticles is reported. By varying the ratio between inorganic nanoparticles and organic COFs, optoelectronic properties of the materials are adjusted. The document also reports the synthesis of a novel boron dipyrromethene-containing (BODIPY) COF. Synthesis, full characterization and the scope of potential applications with a focus on environmental remediation are discussed in detail. Last, a novel diketopyrrolopyrrole-containing (DPP) DPP-Py-COF based on the combination of DDP and pyrene building blocks is presented. The very low bandgap of these materials and initial investigations on the photosensitizing properties are discussed. N2 - Die Forschung an modernen porösen Materialien hat die Entwicklung von COFs als robuste, leichtgewichtige, hochgeordnete und vielseitig einsetzbare organische Materialien vorangetrieben. Der Einsatz von DCC ist entscheidend für den Aufbau hochkristalliner Netzwerke, die in der Lage sind, strukturelle Defekte selbst zu heilen (Kapitel 2.2). Für die einfache Bildung wohldefinierter Kristallite wurden verschiedene synthetische Strategien entwickelt (Kapitel 2.3). Darüber hinaus ist ein detailliertes Verständnis über die verschiedenen Reaktionen, die für die kovalente Verknüpfung organischer Bausteine eingesetzt werden (Kapitel 2.4), und der verschiedenen Topologien, die sich nach der Vernetzung ergeben (Kapitel 2.5), von grundlegender Bedeutung für die Entwicklung einer breiten Auswahl von Materialien für gezielte Anwendungen. ... KW - Organische Chemie KW - Porosität KW - Covalent Organic Framework KW - Reticular Chemistry KW - Dye KW - Porous Materials Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-288996 ER - TY - THES A1 - Mahl, Magnus T1 - Polycyclic Aromatic Dicarboximides as NIR Chromophores, Solid-State Emitters and Supramolecular Host Platforms T1 - Polyzyklische aromatische Dicarboximide als NIR-Chromophore, Festkörperemitter und supramolekulare Wirtsplattformen N2 - The present thesis introduce different synthetic strategies towards a variety of polycyclic aromatic dicarboximides (PADIs) with highly interesting and diverse properties. This included tetrachlorinated, tetraaryloxy- and tetraaryl-substituted dicarboximides, fused acceptor‒donor(‒acceptor) structures as well as sterically shielded rylene and nanographene dicarboximides. The properties and thus the disclosure of structure‒property relationships of the resulting dyes were investigated in detail among others with UV‒vis absorption spectroscopy, fluorescence spectroscopy, cyclic voltammetry and single crystal X-ray analysis. For instance, some of the fused and substituted PADIs offer strong absorption of visible and near infrared (NIR) light, NIR emission and low-lying LUMO levels. On the contrary, intriguing optical features in the solid-state characterize the rylene dicarboximides with their bulky N-substituents, while the devised sterically enwrapped nanographene host offered remarkable complexation capabilities in solution. N2 - Die vorliegende Arbeit stellt verschiedene Synthesestrategien für eine Vielfalt an polyzyklischen aromatischen Dicarboximiden (PADIs) mit hochinteressanten und vielfältigen Eigenschaften vor. Dies beinhaltete tetrachlorierte, tetraryloxy- und tetraaryl-substituierte Dicarboximide, fusionierte Akzeptor‒Donor(‒Akzeptor)-Strukturen wie auch sterisch abgeschirmte Rylen- und Nanographen-Dicarboximide. Die Eigenschaften und damit die Offenlegung von Struktur‒Eigenschaftsbeziehungen der resultierenden Farbstoffe wurden unter anderem mittels UV‒vis Absorptionsspektroskopie, Fluoreszenzspektroskopie, Zyklovoltammetrie und Einkristallstrukturanalyse detalliert untersucht. Zum Beispiel bieten einige der fusionierten und substituierten PADIs eine starke Absorption von sichtbaren und nahen Infrarot-Licht (NIR), NIR-Emission und niedrigliegende LUMO-Niveaus. Im Gegensatz dazu sind die Rylendicarboximide mit ihren voluminösen N-Substituenten durch faszinierende optische Eigenschaften im Festkörper charakterisiert, wohingegen der konzipierte sterisch eingehüllte Nanographen-Wirt bemerkenswerte Komplexierungs-Fähigkeiten in Lösung zeigte. KW - Organische Chemie KW - Perylenbisdicarboximide KW - Farbstoff KW - Fluoreszenz KW - Supramolekulare Chemie KW - C-C coupling KW - dicarboximide KW - NIR chromophore KW - solid-state emitter KW - host-guest chemistry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234623 ER - TY - THES A1 - Bahndorf, Katrin T1 - Synthese und Charakterisierung von Aminosäure-basierten Amphiphilen und deren Umsetzung zu C\(_3\)-symmetrischen Sternmesogenen - Strukturkontrolle in weicher Materie über Oligopeptidaggregation T1 - Synthesis and characterization of amino-acid based amphiphiles and their conversion to C\(_3\)-symmetric star mesogens - structure control in soft matter via oligopeptide aggregation N2 - Synthese einer Bibliothek von Aminosäure-basierten Oligopeptid-Amphiphilen mittels Festphasensynthese, deren kovalente Knüpfung an einen nukleophilen Kern zu C3-symmetrischen Sternmesogenen und die Analyse der Einflüsse der verwendeten Aminosäuren auf die Sekundärstruktur des synthetisierten Moleküls. N2 - Synthesis of a library of amino acid based oligopeptide amphiphiles by solid phase synthesis, their covalent linkage to a nucleophilic core to form C3-symmetrical star mesogens and the analysis of the influences of the used amino acids on the secondary structure of the synthesized molecule. KW - Organische Chemie KW - Flüssigkristalle KW - Festphasenpeptidsynthese KW - Aminosäuren KW - Organic Chemistry KW - Liquid Crystals KW - Solid Phase Peptide Synthesis KW - Amino Acids Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252753 ER - TY - THES A1 - Peethambaran Nair Syamala, Pradeep T1 - Bolaamphiphilic Rylene Bisimides: Thermodynamics of Self-assembly and Stimuli-responsive Properties in Water T1 - Bolaamphiphile Rylenebisimide: Thermodynamik der Selbstorganisation und Stimuli-responsiven Merkmale in Wasser N2 - The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate ‘smart’ materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers. N2 - Die vorliegende Arbeit zeigt, wie verschiedene thermodynamische Aspekte der Selbstorganisation sowie die Stimuli-responsiven Merkmale in Wasser mittels der Struktur von π-Amphiphilen mit Perylen- oder Naphthalinbisimidkernen programmiert werden können. Zunächst wurden quantitative thermodynamische Einblicke in die entropisch getriebene Selbstorganisation für eine Reihe von Naphthalinbisimiden mit UV / Vis- und ITC-Messungen untersucht. Diese zeigten, dass ihr thermodynamisches Aggregationsprofil stark von den Oligoethylenglykol-Seitenketten beeinflusst wird. Anschließend wurde durch gezielte Modulation der Glykolketten und der daraus resultierenden Neuorientierung der Ketten, eine Kontrolle über die Thermodynamik der Selbstassemblierung zwischen der häufiger beobachtbaren enthalpisch getriebenen und der entropisch getriebenen Selbstorganisation erreicht. Schließlich wurde das für diese Farbstoffe beobachtete Phänomen der niedrigeren kritischen Lösungstemperatur (LCST) untersucht, da eine genaue Kontrolle dieses Verhaltens für Selbstorganisationsstudien sowie für die Erzeugung „intelligenter“ Materialien von entscheidender Bedeutung ist. Es konnte gezeigt werden, dass der Beginn der Phasentrennung für diese Moleküle von ihren Imidsubstituenten und hauptsächlich durch die supramolekulare Packung bestimmt werden und nicht durch die Hydrophobie einzelner Monomere. KW - Supramolekulare Chemie KW - Aggregation KW - Selbstorganisation KW - Wasser KW - Supramolecular Chemistry KW - Thermodynamics KW - Self-assembly KW - Lower Critical Solution Temperature (LCST) KW - Water KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213424 ER - TY - THES A1 - Wehner, Marius T1 - Supramolecular Polymorphism in Homo- and Heterochiral Supramolecular Polymerizations T1 - Supramolekularer Polymorphismus in homo- und heterochiralen supramolekularen Polymerisationen N2 - The aim of the first part of this thesis was to investigate (R,R)-PBI as a model system for polymorphism at its origin by a supramolecular approach. The pathway complexity of (R,R)-PBI was fine-tuned by experimental parameters such as solvent, temperature and concentration to make several supramolecular polymorphs accessible. Mechanistic and quantum chemical studies on the kinetics and thermodynamics of the supramolecular polymerization of (R,R)-PBI were conducted to shed light on the initial stages of polymorphism. The second part of this work deals with mechanistic investigations on the supramolecular polymerization of the racemic mixture of (R,R)- and (S,S)-PBI with regard to homochiral and heterochiral aggregation leading to conglomerates and a racemic supramolecular polymer, respectively. N2 - Das Ziel des ersten Teils der Dissertation war es, anhand des Modellsystems (R,R)-PBI Polymorphismus mit Hilfe eines supramolekularen Ansatzes an dessen Ursprung zu untersuchen. Durch die Wahl geeigneter experimenteller Parameter wie Lösungsmittel, Temperatur und Konzentration wurden die komplexen Polymerisationspfade von (R,R)-PBI gezielt beeinflusst und verschiedene supramolekulare Polymorphe zugänglich gemacht. Mechanistische und quantenchemische Untersuchungen der Kinetik und Thermodynamik der supramolekularen Polymerisation von (R,R)-PBI wurden durchgeführt, um die Anfangsphase des Polymorphismus zu beleuchten. Der zweite Teil der vorliegenden Arbeit befasst sich mit mechanistischen Untersuchungen der supramolekularen Polymerisation der racemischen Mischung aus (R,R)- und (S,S)-PBI im Hinblick auf homo- und heterochirale Aggregation, welche zu Konglomeraten beziehungsweise einem racemischen supramolekularen Polymer führte. KW - Supramolekulare Chemie KW - Polymorphismus KW - Konglomerat KW - Aggregat KW - Organische Chemie KW - Aggregation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211519 ER - TY - THES A1 - Sapotta, Meike T1 - Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer T1 - Perylenbisimidcyclophane: Alkaloiderkennung, Aggregationsverhalten in wässriger Umgebung und gastvermittelter Chiralitätstransfer N2 - Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest. N2 - Diese Arbeit befasste sich mit der Erforschung neuer Eigenschaften von Perylenbisimid-cyclophanwirten, zum Beispiel der Gast-Komplexierung in wässriger Umgebung (Kapitel 3.2) oder dem Einfluss von Wasser beim Selbstassemblierungsprozess einer dieser Wirte in Wasser (Kapitel 3.3). Weiterhin wurden der Chiralitätstransfer durch Gasterkennung und das der Wirt-Gast-Komplexbildung zugrunde liegende mechanistische Modell untersucht (Kapitel 3.4). ... KW - Supramolekulare Chemie KW - Perylenderivate KW - Wirt-Gast-Beziehung KW - Host-Guest-Chemistry KW - Self-Assembly in Water KW - Chirality Transfer KW - Chiralität KW - Selbstorganisation KW - Organische Chemie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200028 ER - TY - THES A1 - Wagner, Wolfgang T1 - Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides T1 - Supramolekulare Blockcopolymere von Perylenbisimiden mittels saat-induzierter lebender supramolekularer Polymerisation N2 - The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5. The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry. The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations. Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding. The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity. In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers. Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks. In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization. Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process. Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks. In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials. N2 - Das Forschungsgebiet der supramolekularen Polymerisation hat sich in den letzten Jahrzehnten sehr rasch entwickelt, zumal da supramolekulare Polymere eine Fülle an Anwendungsmöglichkeiten in der organischen Elektronik, der Biologie oder als Funktionsmaterialen bieten (Kapitel 2.1). Während frühere Studien den Fokus auf die Untersuchung der Thermodynamik der supramolekularen Polymerisation gelegt haben (Kapitel 2.2), hat sich das akademische Interesse in jüngster Zeit dahingehend verschoben, Einblicke in kinetisch kontrollierte Selbstassemblierungsprozesse zu erhalten, um neuartige Strukturen mit faszinierenden Eigenschaften zu generieren (Kapitel 2.3). Im Zuge dieser Entwicklung wurde das Konzept der Saat-induzierten und der lebenden supramolekularen Polymerisation entwickelt, welche die Bildung von supramolekularen Polymeren mit geringer Polydispersität in kinetisch kontrollierten Prozessen ermöglichen (Kapitel 2.4). Des Weiteren wurden neue Strategien zu Erzeugung von Nanostrukturen entwickelt, die aus verschiedenen Komponenten aufgebaut sind und somit neue komplexe Strukturmotive zeigen. Eine Einteilung dieser supramolekularen Copolymere anhand einiger Literaturbeispiele und eine kurze Übersicht über die bisherigen Methoden, solche supramolekularen Strukturen zu erzeugen ist in Kapitel 2.5 dargestellt. Das Ziel der Doktorarbeit war die nicht-kovalente Synthese von erstrebenswerten supramolekularen Blockcopolymeren mittels lebender Saat-induzierter Polymerisation und zu erforschen, wie die molekulare Form der Monomerbausteine die supramolekulare Copolymerisation beeinflusst. Basierend auf der Molekülstruktur des zuvor untersuchten Perylenbisimidfarbstoffes H-PBI wurden in dieser Arbeit eine Reihe von neuen Perylenbisimiden mit identischen Amid-Seitengruppen in Imidposition und unterschiedlicher Art oder Anzahl von Buchtsubstituenten synthetisiert und charakterisiert. Die neuen Perylenbisimide wurden erfolgreich in drei Stufen durch neu entwickelte Syntheserouten erhalten, wobei von den jeweiligen Brom substituierten Perylen-3,4:9,10-tetracarbonsäuretetrabutylestern oder von N,N‘ Dicyclohexyl-1,7-dibromperylen-3,4:9,10-tetracarbonsäurebisimid ausgegangen wurde. Alle Zielverbindungen wurden im letzten Syntheseschritt mittels einer Imidisierungsreaktion der jeweiligen Perylenbisanhydridvorstufen mit N (2-Aminoethyl)-3,4,5-tris(dodecyloxy)benzamid erhalten und mittels 1H- und 13C NMR-Spektroskopie sowie mit hochauflösender Massenspektrometrie charakterisiert. Die Variation der Buchtsubstituenten hat einen starken Einfluss auf die optischen Eigenschaften der Perylenbisimidmonomere, was mittels UV/vis- und Fluoreszenzspektroskopie untersucht wurde. Die ansteigende Zahl der Methoxysubstituenten verursacht zum Beispiel eine Rotverschiebung der Absorptionsmaxima, welche mit einer Abnahme der Extinktionskoeffizienten einhergeht, und führt zu einem starken Anstieg der Fluoreszenzquantenausbeute. Außerdem wird auch die Molekülgeometrie der Perylenbisimide durch die Variation der Buchtsubstituenten beeinflusst. Mittels DFT-Rechnungen konnte gezeigt werden, dass eine Zunahme des sterischen Anspruchs der Buchtsubstituenten eine Vergrößerung des Torsionswinkels der Perylenbisimidkerne zur Folge hat. Als besonders geeignet für die im Rahmen dieser Arbeit anvisierten Studien erwies sich das mit zwei Methylgruppen in 1,7-Buchtposition substituierte MeO-PBI. Die Selbstassemblierung dieses 1,7-Dimethoxy-substituierten Perylenbisimid-Derivates wurde mit Hilfe von UV/vis-, Fluoreszenz- und FT-IR-Spektroskopie sowie mittels Rasterkraftmikroskopie detailliert analysiert (Kapitel 3). Diese Studien haben gezeigt, dass MeO-PBI in einem Lösungsmittelgemisch aus Methylcyclohexan und Toluol (2:1, v/v) in einem kinetisch kontrollierten Prozess durch schnelles Abkühlen der Monomerlösung von 90 auf 20 °C „off-pathway“ Nanopartikel ausbildet. Durch langsames Abkühlen der Monomerlösung entstehen hingegen fluoreszierende, J-aggregierte Nanofasern aufgrund von π-π-Wechselwirkungen und intermolekularen Wasserstoffbrückenbindungen. Die kinetisch metastabilen „off-pathway“ H-Aggregate können durch Zugabe einer polymeren J-Aggregat-Saat, welche durch eine Behandlung der polymeren Nanofasern mit Ultraschall gewonnen werden kann, in die thermodynamisch begünstigten J-Aggregate transformiert werden. Außerdem wurde der lebende Charakter dieser supramolekularen Saat-induzierten Polymerisation durch ein neu entworfenes multizyklisches Versuchsprotokoll nachgewiesen. Diese Experimente zur lebenden supramolekularen Polymerisation zeigen deutlich, dass der Polymerisationsprozess nur an den „aktiven“ Enden der polymeren Saat stattfinden kann und dass außerdem kaum Rekombinations- oder Kettenterminationsprozesse auftreten. Folglich ermöglicht die Methode der lebenden supramolekularen Polymerisation die Synthese von supramolekularen Polymeren mit kontrollierbarer Polymerlänge und geringer Polydispersität. In Kapitel 4 wird die Copolymerisation von MeO-PBI mit den strukturell ähnlichen 1,7 Dichlor- (Cl-PBI) und 1,7-Dimethylthiosubstituierten (MeS-PBI) Perylenbisimiden ausgeführt. Beide neuen Perylenbisimide bilden analog zu MeO-PBI „off-pathway“ Aggregate, die durch Saatzugabe in einem kinetisch kontrollierten Prozess in die thermodynamisch stabileren supramolekularen Polymere umgewandelt werden können. Die Stabilität der kinetisch gefangenen Aggregate von Cl-PBI und MeS-PBI ist jedoch verglichen mit den metastabilen Aggregaten von MeO-PBI deutlich geringer, da die π π Wechselwirkungen zwischen den molekularen Bausteinen aufgrund des vergrößerten Torsionswinkels der Peryleneinheiten stark reduziert sind. UV/vis-spektroskopische Studien zeigen, dass die Saat-induzierte Copolymerisation des kinetisch gefangenen Zustandes von MeO-PBI mit der Saat von Cl-PBI durch einen lebenden Kettenwachstumsprozess an den Polymerenden der Saat zur Ausbildung von neuartigen supramolekularen Blockcopolymeren mit A B A Blockstruktur führt. Die erzeugte A-B-A-Blockstruktur der erhaltenen Copolymere konnte eindeutig mittels Rasterkraftmikroskopie bestätigt werden, da die jeweiligen Polymerblöcke bestehend aus den einzelnen monomeren Einheiten anhand der Ganghöhe der helikalen Nanofasern unterschieden werden können. Ausführliche UV/vis- und Rasterkraftmikroskopiestudien haben außerdem demonstriert, dass, zum Beispiel durch Zugabe der Saat von MeO-PBI zu den kinetisch gefangenen Aggregaten von Cl PBI, Triblockcopolymere mit B-A-B-Blockstruktur in einer invertierten Saat-induzierten Zweikomponenten-Copolymerisation, erzeugt werden können. Dieser Wechsel der Blockstruktur kann nur durch perfekt abgestimmte Bedingungen für die Copolymerisation und bei übereinstimmender Molekülgeometrie der Monomereinheiten erreicht werden. Diese Studien zeigen erstmals, dass die Blockstruktur der supramolekularen Polymere durch das Versuchsprotokoll der lebenden supramolekularen Polymerisation variiert werden kann. Des Weiteren lieferten UV/vis-spektroskopische Untersuchungen der lebenden Copolymerisation von MeO-PBI und MeS-PBI ähnliche Ergebnisse, was darauf hindeutet, dass ebenfalls supramolekulare Blockcopolymere mit A-B-A- und B-A-B-Struktur gebildet werden können. Obwohl die einzelnen Polymerblöcke in diesem Fall wegen der identischen Helixganghöhe der Nanofasern nicht zugeordnet werden konnten, so zeigten diese Experimente doch, dass die Methode der Saat-induzierten lebenden Polymerisation nicht auf ein spezielles Paar von Monomerbausteinen limitiert ist. Im letzten Abschnitt der Doktorarbeit (Kapitel 5) wird eine systematische Studie der lebenden Zweikomponenten-Copolymerisation von Perylenbisimiden mit unterschiedlich sterisch anspruchsvollen Buchtsubstituenten dargestellt. Dementsprechend wurde eine Reihe von Perylenbisimiden mit identischen Amidseitenketten, aber unterschiedlicher Anzahl (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) oder Größe (EtO PBI, iPrO-PBI) der Alkoxybuchtsubstituenten untersucht. Die Molekülgeometrie der Monomereinheiten hat einen starken Einfluss auf das thermodynamisch und mehr noch auf das kinetisch kontrollierte Aggregationsverhalten in Lösungsmittelgemischen aus Methylcyclohexan und Toluol. Während die mono- und dialkoxysubstituierten Perylenbisimide kinetisch metastabile Zustände ausbilden, findet die Selbstassemblierung der tri- und tetramethoxysubstituierten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) vollständig unter thermodynamischer Kontrolle statt. Die zwei 1,7 alkoxysubstituierten Perylenbisimide (EtO-PBI, iPrO-PBI) bilden analog zu MeO PBI sowohl kinetische „off-pathway“ H-Aggregate als auch thermodynamisch begünstigte J Aggregate. Verglichen mit MeO-PBI ist jedoch die Stabilität der kinetisch metastabilen Zustände von EtO-PBI und iPrO-PBI viel geringer und die Umwandlung in die thermodynamisch stabileren Aggregate geschieht daher viel schneller. Das monomethoxysubstituierte Perylenbisimid-Derivat (1 MeO PBI) bildet im Gegensatz dazu kinetisch gefangene Monomere durch intramolekulare Wasserstoffbrücken-bindungen, welche sich durch Saat-induzierte Polymerisation in die thermodynamisch begünstigteren Nanofasern transformieren lassen. Die Saat-induzierte Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von MeO-PBI durch Saatzugabe der anderen Perylenbisimide der Reihe wurde mittels UV/vis-Spektroskopie und Rasterkraftmikroskopie analysiert. Diese Studien eröffneten, dass die Bildung von supramolekularen Blockcopolymeren nur für geometrisch passende Kombinationen der Perylenbisimide möglich ist. Dementsprechend führt die Saat-induzierte Polymerisation des kinetisch gefangenen Zustands von MeO-PBI mit den, laut DFT Rechnungen, strukturell ähnlichen Perylenbisimiden (EtO-PBI, iPrO-PBI) zur Bildung von A B A Blockcopolymeren, analog zu dem im Kapitel 4 beschriebenem Fall der Saat induzierten Copolymerisation mit Cl-PBI und MeS-PBI. Die Zugabe einer Saat der planaren Perylenbisimide (H-PBI, 1-MeO-PBI) oder der Perylenbisimide mit stark verdrehten Perylenkernen (1,6,7-MeO-PBI, 1,6,7,12 MeO PBI) zum kinetisch metastabilen Zustand von MeO-PBI führt dagegen nicht zur Bildung von Blockcopolymeren. Der Unterschied in der Molekülgeometrie dieser Monomerbausteine vermindert erheblich die Stärke der π π Wechselwirkungen zwischen den unterschiedlichen Perylenbisimiden und verhindert daher deren Copolymerisation. Die Studien zur Saat induzierten Zweikomponenten-Copolymerisation des kinetisch gefangenen Zustands von 1-MeO-PBI mit den anderen Perylenbisimiden der Serie bestätigte weiterhin, dass eine genaue Übereinstimmung der molekularen Geometrie entscheidend für die Erzeugung von supramolekularen Blockcopolymeren ist. Durch Zugabe der Saat von H-PBI zum kinetisch metastabilen Zustand von 1-MeO-PBI konnten folglich supramolekulare Blockcopolymere generiert werden. Mittels DFT-Rechnungen wurde gezeigt, dass beide Perylenbisimide einen relativ planaren Perylenkern aufweisen, was zu sehr starken, nicht-kovalenten Wechselwirkungen zwischen diesen beiden Monomerbausteinen führt. Die übereinstimmende Geometrie beider Perylenbisimide ermöglicht auch die invertierte Saat-induzierte Copolymerisation des kinetisch gefangenen Zustands von H-PBI mit 1-MeO-PBISaat, was mit einem Wechsel der Blockstruktur des supramolekularen Blockcopolymers von A B A zu B A B einhergeht. Die Zugabe der Saat der mäßig (EtO-PBI, iPrO PBI) und stark verdrehten Perylenbisimide (1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) hat im Gegensatz dazu keinen Effekt auf den kinetisch gefangenen Zustand von 1-MeO-PBI, da die Copolymerisation dieser Perylenbisimide durch die Nichtübereinstimmung der Molekülgeometrie der Monomerbausteine verhindert wird. Abschließend lässt sich zusammenfassen, dass in dieser Arbeit die supramolekulare Polymerisation und Saat-induzierte Zweikomponenten-Copolymerisation einer Reihe von Perylenbisimidmonomeren untersucht worden ist. Die Studien haben demonstriert, dass die thermodynamisch und kinetisch kontrollierten Selbstassemblierungsprozesse durch subtile Änderungen der Monomerbausteine stark variiert werden können. Außerdem zeigen die Ergebnisse, dass die lebende supramolekulare Polymerisation eine sehr leistungsfähige Methode zur Erzeugung von neuartigen supramolekularen, polymeren Nanostrukturen mit kontrollierter Blockstruktur und Längenverteilung darstellt. Die Bildung dieser supramolekularen Blockcopolymere kann nur unter präziser kinetischer Kontrolle erreicht werden und ist durch die Komplementarität der einzelnen molekularen Komponenten stark beeinflusst. Diese aufschlussreichen Studien bilden möglicherweise die Grundlage für ein rationaleres Design neuer Monomerbausteine zur nicht-kovalenten Synthese von hochkomplexen, supramolekularen Strukturen mit potentiell einzigartigen Eigenschaften für mögliche Anwendungen, beispielsweise als neuartige Funktionsmaterialien. KW - Supramolekulare Chemie KW - Perylenbisdicarboximide KW - Lebende Polymerisation KW - Aggregation KW - Supramolecular Block Copolymers KW - Perylenbisimides KW - Kinetic Self-assembly KW - Living Polymerisation KW - Organische Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193004 ER - TY - THES A1 - Zitzler-Kunkel, André T1 - Funktionale Merocyaninfarbstoffe: Synthese, molekulare und Selbstorganisationseigenschaften sowie ihre Anwendung in der organischen Photovoltaik T1 - Functional merocyanine dyes: Synthesis, molecular and self-organization properties as well as their application in organic photovoltaics N2 - Analog zu den auf hochgeordneten Farbstoffarchitekturen in den biologischen Photosyntheseapparaten basierenden Energiekonversionssystemen sollte die exakte Einstellung zwischenmolekularer Wechselwirkungen auch in künstlichen Halbleitern eine entscheidende Rolle für die Weiterentwicklung organischer Elektronikmaterialien spielen. Für eine derartige, präzise Steuerung der nanoskaligen Anordnung in organischen Materialien erscheinen Merocyaninfarbstoffe wegen ihrer hochgerichteten, dipolaren Aggregation äußerst aussichtsreich. In diesem Zusammenhang war das Ziel der vorliegenden Arbeit die Ausnutzung funktionaler, stark selbstorganisierender Merocyanine, um eine gezielte Beeinflussung der Morphologie in der aktiven Schicht von BHJ-Solarzellen zu erreichen. Hierzu sollte zunächst eine umfangreiche Serie komplexer Merocyanine synthetisiert und vollständig charakterisiert werden. Im Folgenden wurde angestrebt, die optischen und elektrochemischen Eigenschaften der molekular gelösten Farbstoffe zu bestimmen und für ausgewählte, geeignete Strukturen das Selbstorganisationsverhalten im Detail zu studieren. Zuletzt sollte durch eine sorgfältige Optimierung der Prozessierungsbedingungen ein Transfer der in Lösung gefundenen, supramolekularen Strukturen in den Blend lösungsprozessierter BHJ-Solarzellen erreicht werden. Die organischen Elektronikbauteile wurden dabei im Arbeitskreis von Prof. Dr. Klaus Meerholz (Universität Köln) gefertigt und charakterisiert. Zusammenfassend zeichnet die vorliegende Arbeit ein umfassendes Bild von der Synthese funktionaler Merocyanine, dem Studium ihrer molekularen und Selbstorganisationseigenschaften sowie ihrer Anwendung als p-Halbleitermaterialien in organischen Solarzellen. Der komplexe Molekülaufbau der dargestellten Farbstoffe führte dabei zur Ausbildung verschiedener Farbstofforganisate, deren Struktur sowohl in Lösung als auch teilweise im Festkörper aufgeklärt werden konnte. Die erfolgreiche Implementierung von H-aggregierten Spezies der Verbindung 67b in die aktive Schicht organischer BHJ-Solarzellen resultierte in der Bildung effizienter Perkolationspfade für Exzitonen und freie Ladungsträger, wodurch diese Bauteile merklich höhere Stromdichten generieren konnten und gegenüber Zellen ohne H-Spezies über 20 % gesteigerte Effizienz aufwiesen. Diese Befunde verifizieren die postulierte Hypothese, dass eine gezielte Einstellung der zwischenmolekularen Wechselwirkungen bei organischen Halbleitern zu einer Optimierung der Funktionalität organischer Elektronikmaterialien beitragen kann. N2 - Similar to the highly ordered dye assemblies in biological photosynthetic energy conversion systems, the exact setting of noncovalent interactions in artificial semiconductor materials could also be of crucial importance for further advancements of organic electronic materials. For such a precise control of the nanoscale arrangement in organic materials, merocyanine dyes appear extremely promising due to their highly directional, dipolar aggregation. In this context, the objective of this work was the use of functional, intensely self-organizing merocyanine dyes to specifically influence the active layer morphology of BHJ solar cells. For this purpose, first of all a comprehensive series of complex merocyanine dyes should be synthesized and fully characterized. In the following, the optical and electrochemical properties of the molecularly dissolved dyes should be determined and the aggregation behavior of selected suitable structures should be in-depth analyzed. Finally, a transfer of the supramolecular structures formed in solution into the blend of solution-processed BHJ solar cells should be accomplished by careful optimization of the processing conditions. In the course of this, the organic solar cell devices were fabricated and characterized in the group of Prof. Dr. Klaus Meerholz (University of Cologne). In summary, the present thesis draws a comprehensive picture of the synthesis of functional merocyanine dyes, the detailed study of their molecular and self-organization properties as well as their application as p-type semiconductor materials in organic photovoltaics. The complex nature of the synthesized dyes led to the formation of various dye assemblies, whose structure could be elucidated in solution as well as partially in the solid state. The successful implementation of H-aggregated species in the active layer of organic BHJ solar cells resulted in the creation of efficient percolation paths for excitons and charge carriers, whereby such devices generated remarkably higher current densities and revealed more than 20 % higher efficiencies compared to cells without H-species. Based on this finding, the initially postulated hypothesis that an exact setting of intermolecular interactions in organic semiconductors can help to optimize the functionality of organic electronic materials, indeed could be verified. KW - Merocyanine KW - Merocyaninfarbstoffe KW - merocyanine dyes KW - Organische Photovoltaik KW - organic photovoltaics KW - Fotovoltaik KW - Organische Chemie Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101536 ER - TY - THES A1 - Gsänger, Marcel T1 - Organic Thin-Film Transistors Based on Dipolar Squaraine Dyes T1 - Organische Dünnschichttransistoren von dipolaren Squarainfarbstoffen N2 - In summary, it can be stated that the herein studied set of acceptor-substituted squaraine dyes can be seen as potent candidates for OTFTs. Furthermore, their transistor performance can be easily tuned to obtain hole mobilities up to 0.45 cm2/Vs from solution and 1.3 cm2/Vs from sublimation by choosing adequate deposition techniques. In the end, a probable structural model derived from studies of the thin-film morphology by methods such as optical spectroscopy, AFM and X-ray even facilitated the clarification of the observed charge transport behavior. N2 - Zusammenfassend lässt sich sagen, dass die in dieser Arbeit untersuchten akzeptorsubstituierten Squarainfarbstoffe durchaus als leistungsfähige Kandidaten für den Einsatz in OTFT-Bauteilen angesehen werden können. Ihre Transistorleistung lässt sich durch geeignete Wahl der Abscheidungsmethode dahingehend einstellen, als dass sich Lochmobilitäten von bis zu 0.45 cm2/Vs mittels Lösungsprozessierung und von bis zu 1.3 cm2/Vs mittels Sublimation realisieren lassen. Schließlich ermöglichte die Untersuchung der Dünnfilmmorphologie mit Methoden wie der optischen Spektroskopie, Rasterkraftmikroskopie und Röntgenbeugung die Schlussfolgerung auf ein mutmaßliches Strukturmodell. KW - Organische Chemie KW - Squaraine KW - Organischer Feldeffekttransistor KW - Organic Chemistry KW - Squaraine KW - Organic Field-Effect Transistor KW - Organischer Halbleiter Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-80588 ER - TY - THES A1 - Mayerhöffer, Ulrich T1 - Synthese, Eigenschaften und funktionale Anwendungen von NIR absorbierenden Squarainen T1 - Synthesis, Properties and Functional Applications of NIR Absorbing Squaraines N2 - Zusammenfassend lässt sich festhalten, dass die in dieser Abreit vorgestellten Squaraine herausragend gute NIR-Absorptions- und NIR-Emissionseigenschaften aufweisen, die sie für zahlreiche Anwendungen interessant machen. Darüber hinaus konnte gezeigt werden, dass ihre besondere cis-Konfiguration und ihr daraus resultierendes Dipolmoment zu vorteilhaften Anordnungen in dünnen Filmen und in Blends mit PCBM führen. Diese Strukturen zeigen für dipolare Moleküle beeindruckende Exzitonen- und Ladungstransporteigenschaften, die vielversprechende Anwendungen in der organischen Elektronik wie in hier untersuchten lösungsprozessierten BHJ-Solarzellen oder auch in OFETs erwarten lassen. N2 - Concluding the results of the present work, the here descript acceptor-substituted squaraines exhibit extremely favourable NIR absorption and emission properties which make them to ideal candidates for a broad variety of functional applications. Furthermore, the additional acceptor functions provoke a cis-configuration, resulting in a permanent ground state dipole moment which becomes a dominating ordering force in supramolecular arrangements of those squaraine dyes in solution as well as in thin organic films and in blends with PCBM. These structures feature unprecedented exciton and charge carrier mobilities for dipolar molecules with promising properties for the application in organic photovoltaics, as demonstrated in this work and for possible future applications such as OFETs. KW - Supramolekulare Chemie KW - Squaraine KW - Photovoltaik KW - NIR KW - Organische Chemie KW - Organic Chemistry KW - supramolecular Chemistry KW - Squaraine KW - Photovoltaic KW - NIR Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69428 ER - TY - THES A1 - Schmidt, Ralf T1 - Hamilton-Receptor-Mediated Self-Assembly of Merocyanine Dyes into Supramolecular Polymers T1 - Hamilton-Rezeptor-vermittelte Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren N2 - Die Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren wurde untersucht. Dabei konnte die Anordnung der hoch dipolaren Farbstoffe durch die Verwendung von verschiedenen Kombinationen von Wasserstoffbrückenbindungsmotiven und dipolarer Aggregation der Chromophore gesteuert. N2 - The self-assembly of merocyanine dyes into supramolecular polymers has been studied. Thereby, the spacial arrangement of the highly dipolar dyes has been controled by employing different combinations of hydrogen bonding motifs and dipolar aggregation of the chromophores. KW - Selbstorganisation KW - Merocyanine KW - Polymere KW - Supramolekulare Struktur KW - Organische Chemie KW - cooperativity KW - dipolar aggregation KW - dyes/pigments KW - hydrogen bond KW - self-assembly Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56265 ER - TY - THES A1 - Musch, Patrick T1 - Large-Scale Applications of Multi-Reference Methods in Chemistry and Development of a Multi-Reference Moller-Plesset Perturbation Theory Program T1 - Anwendung von Multireferenz-Methoden in der Chemie und Entwicklung eines Multireferenz Moller-Plesset-Störungstheorie-Programmes N2 - The first part of this work focuses on the characterization of systems which complex electronic structures require the application of multi-reference methods. The anti-tumor efficacy of the natural product Neocarzinostatin is based on the formation of diradicals and causes DNA cleavage and finally cytolysis. Computations on model systems performed in the present work show the influence of structural features on the mode of action and the efficacy of this antitumor-antibiotic. The cyclization of systems related to the enyne-cumulene framework like the enyne-allenes was investigated earlier and relations to the more unusual class of enyne-ketenes are analyzed. The class of enyne-ketenes (and also the enyne-allenes) show a broad spectrum of possible intermediates (diradicals, zwitterions, allenes). The electronic structures of these intermediates are also possible for the (heteroatom substituted) 1,2,4-cyclohexatriene and a model for their energetic sequence based on high-level multi-reference computations is proposed. In all three projects the application of multi-reference approaches is necessary to obtain a comprehensive picture of the reactivity and electronic structure but also shows up the limits inherently existing in the currently available programs with respect to the size of the molecules. In the second part, algorithms for a multi-reference Moller-Plesset perturbation theory (MR-MP2) program, designed to perform large-scale computations, were developed and implemented. The MR-MP2 approach represents the most cost-effective multireference ansatz and requires an efficient evaluation of the Hamilton matrix for which an algorithm is designed to instantly recognize only non-vanishing matrix elements and to employ the recurring interaction patterns of the Hamilton matrix. The direct construction of the Hamilton matrix is additionally parallelized to work on cluster environments. N2 - Der erste Teil der vorliegenden Arbeit beschäftigt sich mit der Charakterisierung von Systemen, deren komplexe elektronische Struktur die Anwendung von Multireferenz-Methoden erfordert. Die Antitumor-Wirkung des Naturstoffes Neocarzinostatin beruht auf der Bildung von Diradikalen und führt zur Spaltung der DNS und löst den Zelltod aus. Berechnungen an Modellsystemen zeigen den Einfluss der Strukturmotive auf die Wirkungsweise und die Wirksamkeit des Antitumor-Antibiotikums. Die Cyclisierung von Systemen, wie die Eninallene, die dem Enincumulen-Grundgerüst des aktivierten Neocarzinostatin-Chromophors verwandt sind, wurden schon in früheren Arbeiten untersucht und die Verwandtschaft zur ungewöhnlicheren Substanzklasse der Eninketene wird in dieser Arbeit analysiert. Diese Verbindungsklasse und die der Eninallene zeigen ein breites Spektrum an möglichen Intermediaten, wie Diradikale, Carbene, Zwitterionen und Allene, deren elektronische Strukturen auch bei (heterosubstituierten) 1,2,4 Cyclohexatrienen auftreten. Für diese Verbindungen wird ein Modell für die energetische Abfolge der elektronischen Strukturen auf Basis von hochwertigen Multireferenz-Rechnungen vorgeschlagen. In den drei aufgeführten Projekten ist die Anwendung von Multireferenz-Ansätzen notwendig um ein umfassendes Bild der Reaktivitäten und elektronischen Strukturen zu erhalten, zeigen im Hinblick auf große Moleküle aber auch die inhärenten Grenzen in den zur Zeit verfügbaren Programme auf. Im zweiten Teil der Arbeit wurden Algorithmen für ein Multireferenz-Moller-Plesset-Störungstheorie-Programmes (MR-MP2) entwickelt und implementiert. Der MR-MP2-Ansatz stellt den effizientesten Multireferenz-Ansatz dar und setzt eine geschickte und schnelle Berechnung der Hamilton-Matrix voraus. Hierfür ist ein Algorithmus konzipiert worden, der zum einen verschwindende Matrixelemente sofort erkennt und die sich wiederholenden Muster innerhalb der Hamilton-Matrix zu Nutze macht. Die Konstruktion der Hamilton-Matrix für das direkte Verfahren ist zudem für Clusterumgebungen parallelisiert. KW - Theoretische Chemie KW - Organische Chemie KW - Multireferenz KW - Moller-Plesset KW - Antitumor-Antibiotikum KW - Theoretical Chemistry KW - Organic Chemistry KW - Multi Reference KW - Moller-Plesset KW - Antitumor-antibitioc Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7741 ER - TY - THES A1 - Roschmann, Konrad J. T1 - Mn(salen)- und Fe(porph)-katalysierte enantioselektive Epoxidierungen T1 - Mn(salen)- and Fe(porph)-catalyzed enantioselective epoxidations N2 - Ziel der vorliegenden Arbeit war es zum einen, das Potential von chiralen Eisenporphyrin- und Mangansalen-Katalysatoren zur kinetischen Racematspaltung sekundärer Allylalkohole durch asymmetrische Epoxidierung auszuloten. Zum anderen sollten Untersuchungen zum Mechanismus der Jacobsen-Katsuki-Epoxidierung durchgeführt werden; ein besonderes Augenmerk lag dabei auf der Fragestellung, welche Faktoren dazu führen, dass bei der Umsetzung von cis-Olefinen ein Gemisch aus cis- und trans-Epoxiden erhalten wird. Eine Auswahl arylsubstituierter Allylalkohole IIa-f wurde mit den Katalysatoren Ia und Ib,c und 0.8 bzw. 0.6 Äquivalenten an Iodosobenzol als Sauerstoffdonor umgesetzt (Gl. I), wobei es zu einer kinetischen Racematspaltung kommt. Die Oxidation verläuft für beide Katalysatorsysteme sowohl chemoselektiv (vorwiegend Epoxidierung) als auch diastereoselektiv (dr bis zu > 95:5). Als Hauptprodukte werden für die offenkettigen Allylalkohole IIa,e,f die threo-konfigurierten Epoxyalkohole III erhalten, während die cyclischen Allylakohole IIb-d die entsprechenden cis-Epoxyalkohole III lieferen. 1,1-Dimethyl-1,2-dihydro-2-naphthol (IIc) ist hierbei eine Ausnahme, da die CH-Oxidation dieses Substrats eine beachtliche Nebenreaktion darstellt. Der Hauptunterschied zwischen den Fe- und Mn-Katalysatoren liegt in der Enantioselektivität: Während mit dem Fe(porph*)-Komplex Ia nur Selektivitäten von maximal 43 Prozent ee (krel = 2.7) erzielt werden, erwiesen sich die Mn(salen*)-Komplexe Ib,c als geeignete Katalysatoren, mit denen ee-Werte von bis zu 80 Prozent (krel = 12.9) erreicht werden. Die in der kinetischen Racematspaltung erzielten Selektivitäten können durch ein synergistisches Zusammenwirken von hydroxy-dirigierendem Effekt einerseits und sterischen Wechselwirkungen zwischen Substrat und Eisen-Komplex oder, im Falle des Mangan-Komplexes, Angriff des Olefins entlang der so genannten Katsuki-Trajektorie andererseits erklärt werden. Fazit: Die chiralen Mn(salen*)-Komplexe Ib,c sind wirkungsvolle Katalysatoren für die asymmetrische Epoxidierung racemischer sekundärer Allylalkohole II. In exzellenten Chemo- und Diastereoselektivitäten entstehen die entsprechenden Epoxyalkohole III mit ee-Werten bis zu 80 Prozent. Die zurückbleibenden Allylalkohole werden dabei bis zu 53 Prozent ee angereichert. Im Vergleich dazu weist der Eisenkomplex Ia eine ungleich geringere Enantioselektivität auf. Mechanistische Untersuchungen mit Vinylcyclopropan Va ergeben, dass die Jacobsen-Katsuki-Epoxidierung nicht über ein kationisches, sondern über ein radikalisches Intermediat abläuft. Dies wird anhand von Produktstudien durch reversed phase-HPLC-Analytik belegt. In weitergehenden Untersuchungen mit cis-Stilben (Vb) und cis--Methylstyrol (Vc) als Sonden zur cis/trans-Isomerisierung wurde festgestellt, dass die Diastereoselektivität der Epoxidierung nicht nur vom Gegenion des Mangankatalysators Ib, sondern auch von der eingesetzten Sauerstoffquelle [OxD] abhängt. Daher musste der Katalysezyklus (Schema A) um eine diastereoselektivitäts-bestimmende Gabelung erweitert werden: Das primär entstehende MnIII(OxD)-Addukt kann entweder unter Abspaltung der Fluchtgruppe zum etablierten MnV(oxo)-Komplex reagieren (Weg 1) oder direkt das Olefin epoxidieren (Weg 2). Während die Sauerstoffübertragung durch die Oxo-Spezies stufenweise über ein Radikalintermediat verläuft und damit zu einer Mischung aus cis- und trans-Epoxid führt, erfolgt der Lewisäure-aktivierte Sauerstofftransfer konzertiert. Der Gegenion-Effekt auf die cis/trans-Isomerisierung erklärt sich dahingehend, dass die Natur des Anions (koordinierend oder nicht-koordinierend) die Lebensdauer des Radikalintermediats und/oder die Lage und Selektivität der Energiehyperflächen der verschiedenen Spinzustände des MnV(oxo)-Oxidans beeinflusst. Fazit: In der Jacobsen-Katsuki-Epoxidierung existiert neben dem etablierten MnV(oxo)-Oxidans zumindest noch ein weiteres; dabei handelt es sich um das MnIII(OxD)-Addukt, dessen Sauerstoff Lewissäure-aktiviert übertragen wird. Ein unterschiedlicher Anteil der beiden Reaktionskanäle erklärt die Unterschiede im Ausmaß der cis/trans-Isomerisierung. Auch das Gegenion des Mangan-Komplexes Ib beeinflusst die cis/trans-Diastereoselektivität. Mit koordinierenden Gegenionen dominiert Isomerisierung zum trans-Epoxid, während nicht-koordinierende Gegenionen bevorzugt zum cis-Epoxid führen. N2 - The aim of the present work was to explore the potential of chiral iron(porphyrin) and manganese(salen) complexes for the kinetic resolution of secondary allylic alcohols by asymmetric epoxidation. Furthermore, the mechanism of the Jacobsen-Katsuki epoxidation was investigated by elucidating the factors that determine the cis/trans diastereoselectivity in the epoxidation of cis olefins. A set of aryl-substituted racemic allylic alcohols IIa-f has been oxidized by the catalysts Ia and Ib,c with 0.8 or 0.6 equiv. of iodosyl benzene as oxygen source (eq. I) to effect kinetic resolution. For both catalysts, the oxidation is chemoselective (predominantly epoxidation) as well as diastereoselective (dr up to > 95:5), to afford the threo- or cis-configured epoxy alcohols III as main products. In this kinetic resolution, one enantiomer of the allylic alcohol II is preferentially epoxidized to give the corresponding epoxy alcohol III in ee values up to 80 per cent, the other enantiomer remains unreacted and is enriched (up to 53 per cent ee). Quite exceptional is 1,1-dimethyl-1,2-dihydro-2-naphthol (IIc), for which the CH oxidation dominates. The main difference between the iron and the manganese catalysts concerns their enantioselectivity: Whereas the Fe(porph*) complex Ia exhibits only moderate ee values of up to 43 per cent (krel up to 2.7), the Mn(salen*) complexes Ib,c provide enantioselectivities of up to 80 per cent ee (krel up to 12.9), which makes them useful catalysts for the kinetic resolution of the allylic alcohols II. The appreciable selectivities displayed for the manganese complexes Ib,c in these asymmetric epoxidations may be rationalized in terms of the synergistic interplay between the hydroxy-directing effect and the interactions of the catalyst and the substrate in the attack of the olefin along the Katsuki trajectory. Conclusion: The chiral Mn(salen*) complexes Ib,c are highly effective catalysts for the asymmetric epoxidation of the racemic allylic alcohols II. The respective epoxy alcohols III are formed in excellent chemo- and diastereoselectivitites with ee values up to 80 per cent, while the unreacted allylic alcohols are enriched up to 53 per cent ee. In comparison, the enantioselectivity for the iron catalyst Ia is much lower. The manganese-catalyzed oxidation of vinylcyclopropane Va reveals that radical intermediates are formed in the Jacobsen-Katsuki epoxidation rather than cationic ones, as has been confirmed through product studies by reversed-phase HPLC analysis. With cis-stilbene (Vb) and cis--methyl styrene (Vc) as mechanistic probes, it has been shown that the cis/trans diastereoselectivity of the Mn(salen)-catalyzed epoxidation depends not only on the counterion of the catalyst Ib, but also on the oxygen donor [OxD]. A diastereoselectivity-controlling bifurcation step needs to be added to the catalytic cycle (Scheme A), in which the initial MnIII(OxD) adduct may either split off its leaving group to form the established MnV(oxo) species (path 1) or epoxidize the olefin directly (path 2). The oxygen transfer by the oxo complex occurs stepwise through a radical intermediate and results in a mixture of the cis and trans epoxides; in contrast, the Lewis-acid-activated epoxidation is concerted. The effect of the counterion on the cis/trans diastereoselectivity may be explained in terms of whether the anion ligates to the metal. This affects the lifetime of the radical intermediate and/or the reaction profiles of the singlet, triplet and quintet spin states of the MnV(oxo) species, which in turn control the stereoselectivity. Conclusion: In addition to the established MnV(oxo) oxidant, at least one other oxidant has to be involved in the Jacobsen-Katsuki epoxidation; this species is proposed to be the MnIII(OxD) adduct that transfers its oxygen atom in a Lewis-acid activation. Varying proportions of the two oxygen-transfer pathways account for the cis/trans diastereoselectivities observed with the various oxygen donors. The cis/trans ratio also depends on the counterion of the manganese catalyst Ib: Whereas ligating counterions result in extensive cis/trans isomerization, with non-ligating counterions the formation of cis epoxides is strongly favored. KW - Mangan KW - Eisen KW - Epoxidation KW - Enantioselektivität KW - Katalyse KW - Allylalkohol KW - Organische Chemie KW - Katalyse KW - Epoxidierung KW - Mangan KW - Eisen KW - Allylalkohole KW - organic chemistry KW - catalysis KW - epoxidation KW - manganese KW - iron KW - allylic alcohols Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1182584 ER -