TY - THES A1 - Diwischek, Florian T1 - Development of synthesis pathways and characterization of cerulenin analogues as inhibitors of the fatty acid biosynthesis of Mycobacterium tuberculosis and of efflux pump resistant Candida albicans T1 - Entwicklung von Synthesewegen und Charakterisierung von Ceruleninanaloga als Inhibitoren der Fettsäuresynthese von Mycobacterium tuberculosis und Effluxpumpen-resistentem Candida albicans N2 - The work deals with the synthesis and characterization of cerulenin analogues as inhibitors of efflux pump mediated resistance of Candida albicans isolates and as inhibitors of the fatty acid synthesis enzyme KasA of Mycobacterium tuberculosis. Cerulenin was chosen as the lead structure, being a substrate of the efflux pumps in Candida albicans on one hand and therefore variations on the structure could lead to a blocking of the efflux pumps as in the case of tetracycline and inhibitor 13-CPTC of the TetB efflux pump. On the other hand, cerulenin is a known inhibitor of the FAS system but inhibition is unselective in type I and II FAS. Therefore, analogues could result in increased selectivity towards the type II FAS system in M. tuberculosis. The first cerulenin derivatives were prepared by coupling 2,3-dihydrofuran to the before synthesized 1-octaniodide, followed by ring opening and oxidation in one step by chromic acid and transfer of the resulting 4-keto acid to amides to give analogues 4a-d, 4e was prepared in analogy. To include the epoxide function especially with regard to the mechanism of action of cerulenin in the FAS system (considering known crystal structures of cerulenin and the KasA analogue of E. coli) tetrahydro- and dihydrocerulenin analogues were synthesized. Starting from the corresponding aldehyde, lactone 5 (tetrahydrocerulenin analogues) was obtained via two different routes A and B. Route A included the coupling of the aldehyde 1-nonanal to propiolic acid via a Grignard reaction with subsequent hydrogenation with the Lindlar catalyst under hydrogen pressure to give 5. Via Route B 1-nonanal was coupled to methyl propiolate by n-BuLi with subsequent hydrogenation under reflux with the catalytic system Lindlar cat./NH4HCO2 to yield 5. These hydrogenations were also executed in a microwave oven resulting in better yields and/or reaction times. The lactone 5 was then epoxidized, the ring opened by amidation and the remaining alcohol was oxidized via Collins oxidation to result in tetrahydrocerulenin analogues 8a-e. The same procedure was used for dihydrocerulenin analogues 10a-c except that to obtain the corresponding lactone 9a only route A was used and a further step had to be executed for ring closure. To obtain analogues with all structural features of cerulenin including two double bonds and the epoxide function, a third pathway was chosen. To obtain the future side chain, aldehyde 12 was synthesized by coupling protected 4-pentyn-1-ol to either crotyl bromide or crotyl chloride, which then was deprotected, hydrogenated with Lindlar catalyst under hydrogen pressure and oxidized via a Swern oxidation. The following synthesis sequence starting from 12 was executed similar to that of dihydrocerulenins via the corresponding lactone (51) with the major exception of the oxidation procedure in the last step via TPAP/NMO to result in (4Z,7E)-cerulenin analogues 15a-b. A fourth class of cerulenin analogues was synthesized with the aromatic analogues 17a-e. This synthesis pathway started with the formation of the benzoyl acrylamides 16a-e from benzoylacrylic acid via a mixed anhydride which was prepared with isobutylchloroformate followed by the addition of the corresponding amine. Subsequent epoxidation with H2O2 in basic EtOH gave the aromatic cerulenin analogues 17a-e. Pharmacological testings for the synthesized substances were executed on efflux pump-resistant and -sensitive Candida albicans isolates, on the fatty acid synthesis enzyme KasA of Mycobacterium tuberculosis and on other organisms such as Leishmania major, Trypanosoma brucei brucei, Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa within the Sonderforschungsbereich 630. N2 - Die Arbeit befasst sich mit der Synthese und Charakterisierung von Ceruleninanaloga als Inhibitoren effluxpumpenresistenter Candida-albicans-Isolate und als Inhibitoren des Fettsäuresyntheseenzyms KasA von Mycobacterium tuberculosis. Der Naturstoff Cerulenin wurde als Leitstruktur gewählt, da er einerseits ein Substrat der bekannten Effluxpumpen von Candida albicans ist und deshalb Strukturvariationen zu einer Blockierung der Effluxpumpen, wie im Fall von Tetrazyklin und dem Inhibitor 13-CPTC der TetB Effluxpumpe, führen können. Andererseits ist Cerulenin ein bekannter Inhibitor der Fettsäuresynthese, allerdings unselektiv für Typ I und II. Ceruleninanaloga als Fettsäureinhibitoren könnten daher eine erhöhte Selektivität bezüglich des Typ II Fettsäuresystems in M. tuberculosis aufweisen. Die in dieser Arbeit zuerst synthetisierten Ceruleninderivate wurden durch Kupplung von 2,3-Dihydrofuran und dem zuvor dargestellten 1-Octaniodid gefolgt von Ringöffnung und Oxidation mittels Chromsäure zur 4-Ketosäure, und Umsetzung zum entsprechenden Amid und somit den Ceruleninanaloga 4a-d hergestellt. Substanz 4e wurde entsprechend synthetisiert. Um die Epoxidfunktion der Leitstruktur zu integrieren, die besonders hinsichtlich des Wirkmechanismus von Cerulenin im FAS-System wichtig zu sein scheint (wenn man die bekannten Kristallstrukturen von Cerulenin und dem KasA-Analogon in E. coli berücksichtigt), wurden Tetrahydro- und Dihydroceruleninanaloga synthetisiert. Ausgehend von dem entsprechendem Aldehyd wurde (im Fall der Tetrahydrocerulenine) Lacton 5 auf zwei verschiedene Arten dargestellt: mittels Route A und B. Route A beinhaltete die Kupplung des Aldehyds 1-Nonanal mit Propiolsäure durch eine entsprechende Grignardreaktion mit anschließender Hydrierung über Lindlar-Katalysator unter Wasserstoffdruck. Bei Route B wurden 1-Nonanal und Methylpropiolat mittels n-BuLi gekuppelt und anschließend hydriert durch Refluxieren mit Lindlar-Katalysator und NH4HCO2. Die Hydrierungen von Route A und B wurden auch in der Mikrowelle durchgeführt, wodurch bessere Ausbeuten und/oder Reaktionszeiten erzielt werden konnten. Das so dargestellte Lacton 5 wurde dann epoxidiert, der Lactonring durch den Angriff eines Amins geöffnet und der so entstandene Alkohol mittels Collins Oxidierung zu den Tetrahydroceruleninanaloga 8a-e oxidiert. Dihydroceruleninanaloga 10a-c wurden auf analogem Syntheseweg hergestellt mit dem Unterschied, dass die entsprechende Lactonzwischenstufe 9a nur durch Route A synthetisiert und ein weiterer Zwischenschritt zum Ringschluss benötigt wurde. Um Ceruleninanaloga mit allen strukturellen Komponenten des Cerulenins inklusive zweier Doppelbindungen und Epoxidfunktion zu erhalten, wurde ein dritter Syntheseweg gewählt. Zur Integration der späteren Seitenkette wurde zuerst Aldehyd 12 durch Kupplung von geschütztem 4-Pentyn-1-ol mit entweder Crotylbromid oder Crotylchlorid, anschließendem Entschützen und Hydrierung über Lindlar-Katalysator und unter Wasserstoffdruck und nachfolgender Swern Oxidation synthetisiert. Die anschließende Synthesesequenz startete von Substanz 12 und wurde in Anlehnung der Synthese an die Dihydroceruleninderivate über Lacton 51 durchgeführt. Die größte Abweichung stellte dabei die Oxidation im letzten Schritt dar, die mittels TPAP/NMO durchgeführt wurde und in den (4Z,7E)-Ceruleninanaloga 15a-b resultierte. Eine vierte Klasse von Ceruleninanaloga wurde mit den aromatischen Derivaten 17a-e synthetisiert. Diese Route startete mit der Synthese der Benzoylacrylamide 16a-e aus Benzoylacrylsäure über das gemischte Anhydrid, das mit Isobutylchloroformiat hergestellt wurde, gefolgt von der Zugabe des entsprechenden Amins. Die nachfolgende Epoxidierung mit H2O2 in basischem EtOH ergab die aromatischen Ceruleninanaloga 17a-e. Pharmakologische Testungen der synthetisierten Substanzen wurden an Efflux-pumpen-resistenten und -sensitiven Candida albicans Isolaten, am Fettsäuresyntheseenzym KasA von Mycobacterium tuberculosis und an anderen Mikroorganismen wie Leishmania major, Trypanosoma brucei brucei, Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli und Pseudomonas aeruginosa im Sonderforschungsbereich 630 durchgeführt. KW - Organische Synthese KW - Candida albicans KW - Tuberkelbakterium KW - Instrumentelle Analytik KW - Naturstoff KW - Cerulenin KW - KasA KW - Effluxpumpen KW - Fettsäurebiosynthese KW - fatty acid biosynthesis KW - efflux pumps KW - kasA KW - cerulenin KW - tuberculosis KW - Candida albicans Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-27532 ER -