TY - JOUR A1 - Mechau, Jannik A1 - Frank, Andreas A1 - Bakirci, Ezgi A1 - Gumbel, Simon A1 - Jungst, Tomasz A1 - Giesa, Reiner A1 - Groll, Jürgen A1 - Dalton, Paul D. A1 - Schmidt, Hans‐Werner T1 - Hydrophilic (AB)\(_{n}\) Segmented Copolymers for Melt Extrusion‐Based Additive Manufacturing JF - Macromolecular Chemistry and Physics N2 - Several manufacturing technologies beneficially involve processing from the melt, including extrusion‐based printing, electrospinning, and electrohydrodynamic jetting. In this study, (AB)\(_{n}\) segmented copolymers are tailored for melt‐processing to form physically crosslinked hydrogels after swelling. The copolymers are composed of hydrophilic poly(ethylene glycol)‐based segments and hydrophobic bisurea segments, which form physical crosslinks via hydrogen bonds. The degree of polymerization was adjusted to match the melt viscosity to the different melt‐processing techniques. Using extrusion‐based printing, a width of approximately 260 µm is printed into 3D constructs, with excellent interlayer bonding at fiber junctions, due to hydrogen bonding between the layers. For melt electrospinning, much thinner fibers in the range of about 1–15 µm are obtained and produced in a typical nonwoven morphology. With melt electrowriting, fibers are deposited in a controlled way to well‐defined 3D constructs. In this case, multiple fiber layers fuse together enabling constructs with line width in the range of 70 to 160 µm. If exposed to water the printed constructs swell and form physically crosslinked hydrogels that slowly disintegrate, which is a feature for soluble inks within biofabrication strategies. In this context, cytotoxicity tests confirm the viability of cells and thus demonstrating biocompatibility of this class of copolymers. KW - 3D printing KW - (AB)\(_{n}\) segmented copolymers KW - biocompatibility KW - melt electrowriting Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-224513 VL - 222 IS - 1 ER - TY - JOUR A1 - Bakirci, Ezgi A1 - Frank, Andreas A1 - Gumbel, Simon A1 - Otto, Paul F. A1 - Fürsattel, Eva A1 - Tessmer, Ingrid A1 - Schmidt, Hans‐Werner A1 - Dalton, Paul D. T1 - Melt Electrowriting of Amphiphilic Physically Crosslinked Segmented Copolymers JF - Macromolecular Chemistry and Physics N2 - Various (AB)\(_{n}\) and (ABAC)\(_{n}\) segmented copolymers with hydrophilic and hydrophobic segments are processed via melt electrowriting (MEW). Two different (AB)\(_{n}\) segmented copolymers composed of bisurea segments and hydrophobic poly(dimethyl siloxane) (PDMS) or hydrophilic poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEG-PPO) segments, while the amphiphilic (ABAC)\(_{n}\) segmented copolymers consist of bisurea segments in the combination of hydrophobic PDMS segments and hydrophilic PPO-PEG-PPO segments with different ratios, are explored. All copolymer compositions are processed using the same conditions, including nozzle temperature, applied voltage, and collector distance, while changes in applied pressure and collector speed altered the fiber diameter in the range of 7 and 60 µm. All copolymers showed excellent processability with MEW, well-controlled fiber stacking, and inter-layer bonding. Notably, the surfaces of all four copolymer fibers are very smooth when visualized using scanning electron microscopy. However, the fibers show different roughness demonstrated with atomic force microscopy. The non-cytotoxic copolymers increased L929 fibroblast attachment with increasing PDMS content while the different copolymer compositions result in a spectrum of physical properties. KW - melt electrowriting KW - 3D printing KW - additive manufacturing KW - electrohydrodynamics Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-257572 VL - 222 IS - 22 ER - TY - THES A1 - Bakirci, Ezgi T1 - Development of \(In\) \(vitro\) Models for Tissue Engineering Applications Using a High-Resolution 3D Printing Technology T1 - Entwicklung von \(In\) \(vitro\)-Modellen für Tissue-Engineering-Anwendungen mithilfe einer hochauflösenden 3D-Drucktechnologie N2 - In vitro models mimic the tissue-specific anatomy and play essential roles in personalized medicine and disease treatments. As a sophisticated manufacturing technology, 3D printing overcomes the limitations of traditional technologies and provides an excellent potential for developing in vitro models to mimic native tissue. This thesis aims to investigate the potential of a high-resolution 3D printing technology, melt electrowriting (MEW), for fabricating in vitro models. MEW has a distinct capacity for depositing micron size fibers with a defined design. In this thesis, three approaches were used, including 1) extending the MEW polymer library for different biomedical applications, 2) developing in vitro models for evaluation of cell growth and migration toward the different matrices, and 3) studying the effect of scaffold designs and biochemical cues of microenvironments on cells. First, we introduce the MEW processability of (AB)n and (ABAC)n segmented copolymers, which have thermally reversible network formulation based on physical crosslinks. Bisurea segments are combined with hydrophobic poly(dimethylsiloxane) (PDMS) or hydrophilic poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEG-PPO) segments to form the (AB)n segmented copolymers. (ABAC)n segmented copolymers contain all three segments: in addition to bisurea, both hydrophobic and hydrophilic segments are available in the same polymer chain, resulting in tunable mechanical and biological behaviors. MEW copolymers either support cells attachment or dissolve without cytotoxic side effects when in contact with the polymers at lower concentrations, indicating that this copolymer class has potential in biological applications. The unique biological and surface properties, transparency, adjustable hydrophilicity of these copolymers could be beneficial in several in vitro models. The second manuscript addresses the design and development of a melt electrowritten competitive 3D radial migration device. The approach differs from most of the previous literature, as MEW is not used here to produce cell invasive scaffolds but to fabricate an in vitro device. The device is utilized to systematically determine the matrix which promotes cell migration and growth of glioblastoma cells. The glioblastoma cell migration is tested on four different Matrigel concentrations using a melt electrowritten radial device. The glioblastoma U87 cell growth and migration increase at Matrigel concentrations 6 and 8 mg mL-1 In the development of this radial device, the accuracy, and precision of melt electrowritten circular shapes were investigated. The results show that the printing speed and design diameter are essential parameters for the accuracy of printed constructs. It is the first instance where MEW is used for the production of in vitro devices. The influence of biochemical cues and scaffold designs on astrocytes and glioblastoma is investigated in the last manuscript. A fiber comprising the box and triangle-shaped pores within MEW scaffolds are modified with biochemical cues, including RGD and IKVAV peptides using a reactive NCO-sP(EO-stat-PO) macromer. The results show that astrocytes and glioblastoma cells exhibit different phenotypes on scaffold designs and peptide-coated scaffolds. N2 - In-vitro-Modelle sind Werkzeuge, die die gewebespezifische Anatomie nachbilden und eine wesentliche Rolle in der personalisierten Medizin und bei der Behandlung von Krankheiten spielen. Als hochentwickelte, multifunktionale Fertigungstechnologie überwindet der 3D-Druck die Grenzen herkömmlicher Technologien und bietet ein hervorragendes Potenzial für die Herstellung von In-vitro-Modellen. Der 3D-Druck ist eine der vielversprechendsten Techniken, um biologische Materialien in einer komplexen Anordnung zusammenzusetzen, die das natürliche Gewebe nachahmt. In dieser Arbeit soll das Potenzial der hochauflösenden 3D-Drucktechnologie melt electrowriting (MEW), für die Herstellung von In-vitro-Modellen untersucht werden. Wir konzentrieren uns auf drei Ansätze: 1) die Erweiterung der MEW-Polymerbibliothek für verschiedene biomedizinische Anwendungen, 2) die Entwicklung von In-vitro-Modellen zur Bewertung des Zellwachstums und der Zellmigration in Richtung der verschiedenen Matrizes und 3) die Untersuchung der Auswirkungen von MEW-Gerüstdesigns und biochemischen Faktoren der Mikroumgebung auf Zellen. Zunächst haben wir die MEW-Verarbeitbarkeit von segmentierten (AB)n- und (ABAC)n-Copolymeren vorgestellt, die eine thermisch reversible Netzwerkformulierung auf der Grundlage physikalischer Vernetzungen aufweisen. Bisurea-Segmente werden mit hydrophoben hydrophobic poly(dimethyl siloxane) (PDMS) oder hydrophilen poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEG-PPO) Segmenten kombiniert, um die (AB)n segmentierten Copolymere zu bilden. Segmentierte (ABAC)n-Copolymere enthalten alle drei Segmente: Zusätzlich zu den Bisurea-Segmenten sind sowohl hydrophobe als auch hydrophile Segmente in derselben Polymerkette vorhanden, was den segmentierten (ABAC)n-Copolymeren abstimmbare mechanische und biologische Eigenschaften verleiht. MEW-Copolymere unterstützten entweder die Anhaftung an Zellen oder lösten sich ohne zytotoxische Nebenwirkungen auf, wenn sie in niedrigeren Konzentrationen mit ihnen in Berührung kamen, was darauf hindeutet, dass diese Copolymerklasse über umfassende biologische Eigenschaften verfügt. Die einzigartigen biologischen Eigenschaften und Oberflächeneigenschaften, die Transparenz und die einstellbare Hydrophilie dieser Copolymere könnten in verschiedenen In-vitro-Modellen von Vorteil sein. Das zweite Manuskript befasst sich mit einem durch MEW hergestellten wettbewerbsfähigen 3D-Radialmigrationsdesign. Der Ansatz unterscheidet sich vom Großteil der MEW-Literatur, da MEW nicht zur Herstellung von invasiven Zellgerüsten verwendet wurde, sondern zur Herstellung eines In-vitro-Designs diente. Das Design wurde verwendet, um systematisch die Matrix zu bestimmen, die die Zellmigration und das Wachstum von Glioblastomzellen fördert. Die Migration der Glioblastomzellen wurde auf vier verschiedenen Matrigel-Konzentrationen unter Verwendung einer durch MEW hergestellten Radialvorrichtung getestet. Das Wachstum und die Migration der Glioblastomzellen U87 nahmen bei Matrigelkonzentrationen von 6 und 8 mg mL-1 zu. Wir untersuchten auch die Genauigkeit und Präzision der durch MEW erzeugten Kreisformen. Die Ergebnisse zeigten, dass die Druckgeschwindigkeit und der Designdurchmesser wesentliche Parameter für die Genauigkeit der gedruckten Konstrukte sind. Die Arbeit ist die erste Studie, die MEW für die Herstellung von In-vitro-Modellen verwendet. Im letzten Manuskript wurde der Einfluss von biochemische Funktionalisierung in Kombination mit Gerüstdesigns auf Astrozyten und Glioblastome untersucht. Die kastenförmigen und achteckigen MEW-Gerüste wurden mit biochemischen Wirkstoffen modifiziert, darunter RGD- und IKVAV-Peptide unter Verwendung von reaktivem NCO-sP(EO-stat-PO). Wir fanden heraus, dass Astrozyten und Glioblastomzellen unterschiedliche Phänotypen auf den verschiedenen Designs und mit Peptiden beschichteten Gerüsten aufweisen. KW - Melt electrowriting KW - 3D-Druck KW - 3D printing KW - In vitro model Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251645 ER -