TY - JOUR A1 - Schneider, Verena A1 - Kruse, Daniel A1 - Bernardelli de Mattos, Ives A1 - Zöphel, Saskia A1 - Tiltmann, Kendra-Kathrin A1 - Reigl, Amelie A1 - Khan, Sarah A1 - Funk, Martin A1 - Bodenschatz, Karl A1 - Groeber-Becker, Florian T1 - A 3D in vitro model for burn wounds: monitoring of regeneration on the epidermal level JF - Biomedicines N2 - Burns affect millions every year and a model to mimic the pathophysiology of such injuries in detail is required to better understand regeneration. The current gold standard for studying burn wounds are animal models, which are under criticism due to ethical considerations and a limited predictiveness. Here, we present a three-dimensional burn model, based on an open-source model, to monitor wound healing on the epidermal level. Skin equivalents were burned, using a preheated metal cylinder. The healing process was monitored regarding histomorphology, metabolic changes, inflammatory response and reepithelialization for 14 days. During this time, the wound size decreased from 25% to 5% of the model area and the inflammatory response (IL-1β, IL-6 and IL-8) showed a comparable course to wounding and healing in vivo. Additionally, the topical application of 5% dexpanthenol enhanced tissue morphology and the number of proliferative keratinocytes in the newly formed epidermis, but did not influence the overall reepithelialization rate. In summary, the model showed a comparable healing process to in vivo, and thus, offers the opportunity to better understand the physiology of thermal burn wound healing on the keratinocyte level. KW - skin models KW - open-source epidermis KW - wound model KW - impedance spectroscopy KW - wound physiology KW - burn wound Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246068 SN - 2227-9059 VL - 9 IS - 9 ER - TY - JOUR A1 - Wallstabe, Julia A1 - Bussemer, Lydia A1 - Groeber-Becker, Florian A1 - Freund, Lukas A1 - Alb, Mirian A1 - Dragan, Mariola A1 - Waaga-Gasser, Ana Maria A1 - Jakubietz, Rafael A1 - Kneitz, Hermann A1 - Rosenwald, Andreas A1 - Rebhan, Silke A1 - Walles, Heike A1 - Mielke, Stephan T1 - Inflammation-Induced Tissue Damage Mimicking GvHD in Human Skin Models as Test Platform for Immunotherapeutics JF - ALTEX N2 - Due to the rapidly increasing development and use of cellular products, there is a rising demand for non-animal-based test platforms to predict, study and treat undesired immunity. Here, we generated human organotypic skin models from human biopsies by isolating and expanding keratinocytes, fibroblasts and microvascular endothelial cells and seeding these components on a collagen matrix or a biological vascularized scaffold matrix in a bioreactor. We then were able to induce inflammation-mediated tissue damage by adding pre-stimulated, mismatched allogeneic lymphocytes and/or inflammatory cytokine-containing supernatants histomorphologically mimicking severe graft versus host disease (GvHD) of the skin. This could be prevented by the addition of immunosuppressants to the models. Consequently, these models harbor a promising potential to serve as a test platform for the prediction, prevention and treatment of GvHD. They also allow functional studies of immune effectors and suppressors including but not limited to allodepleted lymphocytes, gamma-delta T cells, regulatory T cells and mesenchymal stromal cells, which would otherwise be limited to animal models. Thus, the current test platform, developed with the limitation that no professional antigen presenting cells are in place, could greatly reduce animal testing for investigation of novel immune therapies. KW - inflammation-induced tissue demage KW - immunotherapeutics Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-229974 VL - 37 IS - 3 ER - TY - JOUR A1 - Tuca, Alexandru-Cristian A1 - Bernardelli de Mattos, Ives A1 - Funk, Martin A1 - Winter, Raimund A1 - Palackic, Alen A1 - Groeber-Becker, Florian A1 - Kruse, Daniel A1 - Kukla, Fabian A1 - Lemarchand, Thomas A1 - Kamolz, Lars-Peter T1 - Orchestrating the dermal/epidermal tissue ratio during wound healing by controlling the moisture content JF - Biomedicines N2 - A balanced and moist wound environment and surface increases the effect of various growth factors, cytokines, and chemokines, stimulating cell growth and wound healing. Considering this fact, we tested in vitro and in vivo water evaporation rates from the cellulose dressing epicite\(^{hydro}\) when combined with different secondary dressings as well as the resulting wound healing efficacy in a porcine donor site model. The aim of this study was to evaluate how the different rates of water evaporation affected wound healing efficacy. To this end, epicite\(^{hydro}\) primary dressing, in combination with different secondary dressing materials (cotton gauze, JELONET\(^◊\), AQUACEL\(^®\) Extra\(^™\), and OPSITE\(^◊\) Flexifix), was placed on 3 × 3 cm-sized dermatome wounds with a depth of 1.2 mm on the flanks of domestic pigs. The healing process was analyzed histologically and quantified by morphometry. High water evaporation rates by using the correct secondary dressing, such as cotton gauze, favored a better re-epithelialization in comparison with the low water evaporation resulting from an occlusive secondary dressing, which favored the formation of a new and intact dermal tissue that nearly fully replaced all the dermis that was removed during wounding. This newly available evidence may be of great benefit to clinical wound management. KW - bacterial cellulose dressing KW - secondary wound dressing KW - moisture balance KW - wound healing KW - in vivo experiments Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-275115 SN - 2227-9059 VL - 10 IS - 6 ER - TY - JOUR A1 - Gensler, Marius A1 - Leikeim, Anna A1 - Möllmann, Marc A1 - Komma, Miriam A1 - Heid, Susanne A1 - Müller, Claudia A1 - Boccaccini, Aldo R. A1 - Salehi, Sahar A1 - Groeber-Becker, Florian A1 - Hansmann, Jan T1 - 3D printing of bioreactors in tissue engineering: A generalised approach JF - PLoS One N2 - 3D printing is a rapidly evolving field for biological (bioprinting) and non-biological applications. Due to a high degree of freedom for geometrical parameters in 3D printing, prototype printing of bioreactors is a promising approach in the field of Tissue Engineering. The variety of printers, materials, printing parameters and device settings is difficult to overview both for beginners as well as for most professionals. In order to address this problem, we designed a guidance including test bodies to elucidate the real printing performance for a given printer system. Therefore, performance parameters such as accuracy or mechanical stability of the test bodies are systematically analysed. Moreover, post processing steps such as sterilisation or cleaning are considered in the test procedure. The guidance presented here is also applicable to optimise the printer settings for a given printer device. As proof of concept, we compared fused filament fabrication, stereolithography and selective laser sintering as the three most used printing methods. We determined fused filament fabrication printing as the most economical solution, while stereolithography is most accurate and features the highest surface quality. Finally, we tested the applicability of our guidance by identifying a printer solution to manufacture a complex bioreactor for a perfused tissue construct. Due to its design, the manufacture via subtractive mechanical methods would be 21-fold more expensive than additive manufacturing and therefore, would result in three times the number of parts to be assembled subsequently. Using this bioreactor we showed a successful 14-day-culture of a biofabricated collagen-based tissue construct containing human dermal fibroblasts as the stromal part and a perfusable central channel with human microvascular endothelial cells. Our study indicates how the full potential of biofabrication can be exploited, as most printed tissues exhibit individual shapes and require storage under physiological conditions, after the bioprinting process. KW - stem cells KW - technology Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-231368 VL - 15 IS - 11 ER -