TY - JOUR A1 - Hahn, Lukas A1 - Beudert, Matthias A1 - Gutmann, Marcus A1 - Keßler, Larissa A1 - Stahlhut, Philipp A1 - Fischer, Lena A1 - Karakaya, Emine A1 - Lorson, Thomas A1 - Thievessen, Ingo A1 - Detsch, Rainer A1 - Lühmann, Tessa A1 - Luxenhofer, Robert T1 - From Thermogelling Hydrogels toward Functional Bioinks: Controlled Modification and Cytocompatible Crosslinking JF - Macromolecular Bioscience N2 - Hydrogels are key components in bioink formulations to ensure printability and stability in biofabrication. In this study, a well-known Diels-Alder two-step post-polymerization modification approach is introduced into thermogelling diblock copolymers, comprising poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine). The diblock copolymers are partially hydrolyzed and subsequently modified by acid/amine coupling with furan and maleimide moieties. While the thermogelling and shear-thinning properties allow excellent printability, trigger-less cell-friendly Diels-Alder click-chemistry yields long-term shape-fidelity. The introduced platform enables easy incorporation of cell-binding moieties (RGD-peptide) for cellular interaction. The hydrogel is functionalized with RGD-peptides using thiol-maleimide chemistry and cell proliferation as well as morphology of fibroblasts seeded on top of the hydrogels confirm the cell adhesion facilitated by the peptides. Finally, bioink formulations are tested for biocompatibility by incorporating fibroblasts homogenously inside the polymer solution pre-printing. After the printing and crosslinking process good cytocompatibility is confirmed. The established bioink system combines a two-step approach by physical precursor gelation followed by an additional chemical stabilization, offering a broad versatility for further biomechanical adaptation or bioresponsive peptide modification. KW - chemical crosslinking KW - biofabrication KW - bioprinting KW - hydrogels Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-257542 VL - 21 IS - 10 ER - TY - THES A1 - Beudert, Matthias T1 - Bioinspired Modification and Functionalization of Hydrogels for Applications in Biomedicine T1 - Biologisch-inspirierte Modifizierung und Funktionalisierung von Hydrogelen für Anwendungen in der Biomedizin N2 - Over the years, hydrogels have been developed and used for a huge variety of different applications ranging from drug delivery devices to medical products. In this thesis, a poly(2-methyl-2-oxazoline) (POx) / poly(2-n-propyl-2-oxazine) (POzi) bioink was modified and analyzed for the use in biofabrication and targeted drug delivery. In addition, the protein fibrinogen (Fbg) was genetically modified for an increased stability towards plasmin degradation for its use as wound sealant. In Chapter 1, a thermogelling, printable POx/POzi-based hydrogel was modified with furan and maleimide moieties in the hydrophilic polymer backbone facilitating post-printing maturation of the constructs via Diels-Alder chemistry. The modification enabled long-term stability of the hydrogel scaffolds in aqueous solutions which is necessary for applications in biofabrication or tissue engineering. Furthermore, we incorporated RGD-peptides into the hydrogel which led to cell adhesion and elongated morphology of fibroblast cells seeded on top of the scaffolds. Additional printing experiments demonstrate that the presented POx/POzi system is a promising platform for the use as a bioink in biofabrication. Chapter 2 highlights the versatility of the POx/POzi hydrogels by adapting the system to a use in targeted drug delivery. We used a bioinspired approach for a bioorthogonal conjugation of insulin-like growth factor I (IGF-I) to the polymer using an omega-chain-end dibenzocyclooctyne (DBCO) modification and a matrix metalloprotease-sensitive peptide linker. This approach enabled a bioresponsive release of IGF-I from hydrogels as well as spatial control over the protein distribution in 3D printed constructs which makes the system a candidate for the use in personalized medicine. Chapter 3 gives a general overview over the necessity of wound sealants and the current generations of fibrin sealants on the market including advantages and challenges. Furthermore, it highlights trends and potential new strategies to tackle current problems and broadens the toolbox for future generations of fibrin sealants. Chapter 4 applies the concepts of recombinant protein expression and molecular engineering to a novel generation of fibrin sealants. In a proof-of-concept study, we developed a new recombinant fibrinogen (rFbg) expression protocol and a Fbg mutant that is less susceptible to plasmin degradation. Targeted lysine of plasmin cleavage sites in Fbg were exchanged with alanine or histidine in different parts of the molecule. The protein was recombinantly produced and restricted plasmin digest was analyzed using high resolution mass spectrometry. In addition to that, we developed a novel time resolved screening protocol for the detection of new potential plasmin cleavage sites for further amino acid exchanges in the fibrin sealant. N2 - Hydrogele wurden im Laufe der Jahre für eine Vielzahl von Anwendungen, von der Verabreichung von Medikamenten bis hin zu medizinischen Produkten, entwickelt und eingesetzt. In dieser Arbeit wurde eine Poly(2-methyl-2-oxazolin) POx) / Poly(2-n-propyl-2- oxazin) (POzi) Biotinte modifiziert und für den Einsatz in der Biofabrikation und für die gezielte Verabreichung von Medikamenten analysiert. Außerdem wurde das Protein Fibrinogen (Fbg) gentechnisch verändert, um seine Stabilität gegenüber dem Plasminabbau in seiner Funktion als Wundkleber zu erhöhen In Kapitel 1 wurde ein thermogelierendes, druckbares Hydrogel auf POx/POzi-Basis mit Furan- und Maleimid-Funktionen im hydrophilen Polymerrückgrat modifiziert, was die Reifung der Konstrukte nach dem Druck durch Diels-Alder-Chemie bewirkt. Die Modifizierung ermöglichte eine langfristige Stabilität der Hydrogele in wässrigen Lösungen, was für Anwendungen im Bereich der Biofabrikation oder im Tissue Engineering erforderlich ist. Darüber hinaus haben wir RGD-Peptide in das Hydrogel integriert, was zur Zelladhäsion und einer verlängerten Morphologie von Fibroblasten, die auf den Gelen ausgesät wurden, führte. Weitere Druckexperimente zeigen außerdem, dass das POx/POzi-System eine vielversprechende Plattform für den Einsatz als Biotinte in der Biofabrikation ist. Kapitel 2 unterstreicht die Vielseitigkeit der POx/POzi-Hydrogele, indem das System für die gezielte Abgabe von Medikamenten angepasst wird. Wir verwendeten einen von der Natur inspirierten Ansatz für eine biorthogonale Konjugation vom Insuline-like Growth Factor I (IGF- I) an das Polymer unter Verwendung einer Dibenzocyclooctin-Modifikation des Polymers am Ende der Omega-Kette und eines Matrix-Metalloproteasen-empfindlichen Peptid-Linkers. Dieser Ansatz ermöglichte eine bioresponsive Freisetzung von IGF-I aus Hydrogelen sowie eine räumliche Kontrolle über die Proteinverteilung in 3D-gedruckten Konstrukten, was das System zu einem Kandidaten für den Einsatz in der personalisierten Medizin macht. Kapitel 3 gibt einen allgemeinen Überblick über die Notwendigkeit von Wundversiegelungsmitteln und die derzeit auf dem Markt befindlichen Generationen von Fibrinklebern einschließlich der Vorteile und Herausforderungen. Darüber hinaus werden Trends und potenzielle neue Strategien zur Lösung aktueller Probleme und zur Erweiterung der Toolbox für künftige Generationen von Fibrinklebern aufgezeigt. In Kapitel 4 werden die Konzepte der rekombinanten Proteinexpression und des Molecular Engineering auf eine neue Generation von Fibrin Wundklebern angewandt. In einer Proof-of- Concept-Studie haben wir ein neues rekombinantes Fbg Expressionsprotokoll und eine Fbg Mutante entwickelt, die weniger anfällig für einen Abbau durch Plasmin ist. Gezielte Lysine in Plasmin-Schnittstellen in Fbg wurde entweder durch Alanin oder Histidin in unterschiedlichen Teilen des Moleküls ausgetauscht. Das Protein wurde rekombinant hergestellt und eine verminderte Schnittrate wurde mittels hochauflösender Massenspektrometrie gezeigt. Zusätzlich haben wir ein neues zeitaufgelöstes Screening-Protokoll entwickelt, mit dem sich neue potenzielle Plasmin-Spaltstellen für weitere Aminosäurenaustausche in Fibrin-Klebern auflösen lassen. KW - Hydrogel KW - Targeted drug delivery KW - 3 D bioprinting KW - Hydrogels KW - Modification KW - Bioinks KW - Fibrinogen KW - Drug Delivery Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322887 ER -