TY  - JOUR
A1  - Dörk, Thilo
A1  - Peterlongo, Peter
A1  - Mannermaa, Arto
A1  - Bolla, Manjeet K.
A1  - Wang, Qin
A1  - Dennis, Joe
A1  - Ahearn, Thomas
A1  - Andrulis, Irene L.
A1  - Anton-Culver, Hoda
A1  - Arndt, Volker
A1  - Aronson, Kristan J.
A1  - Augustinsson, Annelie
A1  - Beane Freeman, Laura E.
A1  - Beckmann, Matthias W.
A1  - Beeghly-Fadiel, Alicia
A1  - Behrens, Sabine
A1  - Bermisheva, Marina
A1  - Blomqvist, Carl
A1  - Bogdanova, Natalia V.
A1  - Bojesen, Stig E.
A1  - Brauch, Hiltrud
A1  - Brenner, Hermann
A1  - Burwinkel, Barbara
A1  - Canzian, Federico
A1  - Chan, Tsun L.
A1  - Chang-Claude, Jenny
A1  - Chanock, Stephen J.
A1  - Choi, Ji-Yeob
A1  - Christiansen, Hans
A1  - Clarke, Christine L.
A1  - Couch, Fergus J.
A1  - Czene, Kamila
A1  - Daly, Mary B.
A1  - dos-Santos-Silva, Isabel
A1  - Dwek, Miriam
A1  - Eccles, Diana M.
A1  - Ekici, Arif B.
A1  - Eriksson, Mikael
A1  - Evans, D. Gareth
A1  - Fasching, Peter A.
A1  - Figueroa, Jonine
A1  - Flyger, Henrik
A1  - Fritschi, Lin
A1  - Gabrielson, Marike
A1  - Gago-Dominguez, Manuela
A1  - Gao, Chi
A1  - Gapstur, Susan M.
A1  - García-Closas, Montserrat
A1  - García-Sáenz, José A.
A1  - Gaudet, Mia M.
A1  - Giles, Graham G.
A1  - Goldberg, Mark S.
A1  - Goldgar, David E.
A1  - Guenél, Pascal
A1  - Haeberle, Lothar
A1  - Haimann, Christopher A.
A1  - Håkansson, Niclas
A1  - Hall, Per
A1  - Hamann, Ute
A1  - Hartman, Mikael
A1  - Hauke, Jan
A1  - Hein, Alexander
A1  - Hillemanns, Peter
A1  - Hogervorst, Frans B. L.
A1  - Hooning, Maartje J.
A1  - Hopper, John L.
A1  - Howell, Tony
A1  - Huo, Dezheng
A1  - Ito, Hidemi
A1  - Iwasaki, Motoki
A1  - Jakubowska, Anna
A1  - Janni, Wolfgang
A1  - John, Esther M.
A1  - Jung, Audrey
A1  - Kaaks, Rudolf
A1  - Kang, Daehee
A1  - Kapoor, Pooja Middha
A1  - Khusnutdinova, Elza
A1  - Kim, Sung-Won
A1  - Kitahara, Cari M.
A1  - Koutros, Stella
A1  - Kraft, Peter
A1  - Kristensen, Vessela N.
A1  - Kwong, Ava
A1  - Lambrechts, Diether
A1  - Le Marchand, Loic
A1  - Li, Jingmei
A1  - Lindström, Sara
A1  - Linet, Martha
A1  - Lo, Wing-Yee
A1  - Long, Jirong
A1  - Lophatananon, Artitaya
A1  - Lubiński, Jan
A1  - Manoochehri, Mehdi
A1  - Manoukian, Siranoush
A1  - Margolin, Sara
A1  - Martinez, Elena
A1  - Matsuo, Keitaro
A1  - Mavroudis, Dimitris
A1  - Meindl, Alfons
A1  - Menon, Usha
A1  - Milne, Roger L.
A1  - Mohd Taib, Nur Aishah
A1  - Muir, Kenneth
A1  - Mulligan, Anna Marie
A1  - Neuhausen, Susan L.
A1  - Nevanlinna, Heli
A1  - Neven, Patrick
A1  - Newman, William G.
A1  - Offit, Kenneth
A1  - Olopade, Olufunmilayo I.
A1  - Olshan, Andrew F.
A1  - Olson, Janet E.
A1  - Olsson, Håkan
A1  - Park, Sue K.
A1  - Park-Simon, Tjoung-Won
A1  - Peto, Julian
A1  - Plaseska-Karanfilska, Dijana
A1  - Pohl-Rescigno, Esther
A1  - Presneau, Nadege
A1  - Rack, Brigitte
A1  - Radice, Paolo
A1  - Rashid, Muhammad U.
A1  - Rennert, Gad
A1  - Rennert, Hedy S.
A1  - Romero, Atocha
A1  - Ruebner, Matthias
A1  - Saloustros, Emmanouil
A1  - Schmidt, Marjanka K.
A1  - Schmutzler, Rita K.
A1  - Schneider, Michael O.
A1  - Schoemaker, Minouk J.
A1  - Scott, Christopher
A1  - Shen, Chen-Yang
A1  - Shu, Xiao-Ou
A1  - Simard, Jaques
A1  - Slager, Susan
A1  - Smichkoska, Snezhana
A1  - Southey, Melissa C.
A1  - Spinelli, John J.
A1  - Stone, Jennifer
A1  - Surowy, Harald
A1  - Swerdlow, Anthony J.
A1  - Tamimi, Rulla M.
A1  - Tapper, William J.
A1  - Teo, Soo H.
A1  - Terry, Mary Beth
A1  - Toland, Amanda E.
A1  - Tollenaar, Rob A. E. M.
A1  - Torres, Diana
A1  - Torres-Mejía, Gabriela
A1  - Troester, Melissa A.
A1  - Truong, Thérèse
A1  - Tsugane, Shoichiro
A1  - Untch, Michael
A1  - Vachon, Celine M.
A1  - van den Ouweland, Ans M. W.
A1  - van Veen, Elke M.
A1  - Vijai, Joseph
A1  - Wendt, Camilla
A1  - Wolk, Alicja
A1  - Yu, Jyh-Cherng
A1  - Zheng, Wei
A1  - Ziogas, Argyrios
A1  - Ziv, Elad
A1  - Dunnig, Alison
A1  - Pharaoh, Paul D. P.
A1  - Schindler, Detlev
A1  - Devilee, Peter
A1  - Easton, Douglas F.
T1  - Two truncating variants in FANCC and breast cancer risk
JF  - Scientific Reports
N2  - Fanconi anemia (FA) is a genetically heterogeneous disorder with 22 disease-causing genes reported to date. In some FA genes, monoallelic mutations have been found to be associated with breast cancer risk, while the risk associations of others remain unknown. The gene for FA type C, FANCC, has been proposed as a breast cancer susceptibility gene based on epidemiological and sequencing studies. We used the Oncoarray project to genotype two truncating FANCC variants (p.R185X and p.R548X) in 64,760 breast cancer cases and 49,793 controls of European descent. FANCC mutations were observed in 25 cases (14 with p.R185X, 11 with p.R548X) and 26 controls (18 with p.R185X, 8 with p.R548X). There was no evidence of an association with the risk of breast cancer, neither overall (odds ratio 0.77, 95%CI 0.44–1.33, p = 0.4) nor by histology, hormone receptor status, age or family history. We conclude that the breast cancer risk association of these two FANCC variants, if any, is much smaller than for BRCA1, BRCA2 or PALB2 mutations. If this applies to all truncating variants in FANCC it would suggest there are differences between FA genes in their roles on breast cancer risk and demonstrates the merit of large consortia for clarifying risk associations of rare variants.
KW  - oncology
KW  - risk factors
Y1  - 2019
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-222838
VL  - 9
ER  - 
TY  - THES
A1  - Jung, Melissa
T1  - Entwicklung und Charakterisierung vorgemischter lagerstabiler Zementpasten für den 3D-Druck
T1  - Development and characterization of premixed cement pastes for 3D printing
N2  - Ziel dieser Arbeit war die Entwicklung und Charakterisierung vorgemischter Calciumphosphatzementpasten sowie die Übertragung des Konzepts dieser Pasten auf den 3D-Druck. Es wurden drei verschiedene Zementformulierungen untersucht, basierend auf Pulvermischungen aus α-TCP/DCPA/CaCO3 (Biozement D), TTCP/DCPA und β-TCP/MCPA, die auf verschiedene Materialeigenschaften geprüft und einem 3D-Druckversuch unterzogen wurden. Die Biozement D Paste wurde mit drei Pulver-Flüssigkeits-Verhältnissen (PLR) (80/20, 85/15, 87/13), die TTCP/DCPA Paste mit zwei PLR (83/17, 85/15), und die β-TCP/MCPA Paste ebenfalls mit zwei PLR (67/33, 70/30) getestet. Alle Pasten konnten mit dem 3D-Drucker erfolgreich verdruckt werden. Die Biozement D Paste mit dem PLR 85/15 stellte sich in ihrer Gruppe als die geeignetste Paste heraus. Bessere Ergebnisse bezüglich der Injizierbarkeit und Druckbarkeit erreichte die TTCP/DCPA Paste. Hier wurden mit beiden PLR formstabile Scaffolds erzielt. Feine Wabenmuster konnten mit dem PLR von 83/17 in Kombination mit einer hohen Druckgeschwindigkeit hergestellt werden. Mit dem höheren PLR (85/15) und einer niedrigeren Druckgeschwindigkeit stieg die Formstabilität weiter an, wodurch die hexagonale Struktur exakter gedruckt werden konnte. Ein gutes Druckergebnis konnte auch mit der β-TCP/MCPA Paste und dem PLR 70/30 erreicht werden.
N2  - The aim of this work was the development and characterization of pre-mixed calcium phosphate cement pastes and the transfer of the concept of these pastes to 3D printing. Three different cement formulations were tested, based on powder mixture of α-TCP/DCPA/CaCO3 (Biozement D), TTCP/DCPA and β-TCP/MCPA, which were analyzed for various material properties and subjected to a 3D printing process. The Biozement D paste was made with three powder-to-liquid ratios (PLR) (80/20, 85/15, 87/13), the TTCP/DCPA paste with two PLRs (83/17, 85/15), and the β-TCP/MCPA paste also with two PLR (67/33, 70/30). Every paste could be successfully printed with the 3D printer. The Biozement D paste with the PLR 85/15 turned out to be the most suitable paste in its group. The TTCP/DCPA paste achieved better results in terms of injectability and printability. Dimensionally stable scaffolds were achieved with both PLR. Fine honeycomb patterns could be produced with the PLR of 83/17 in combination with a high printing speed. With the higher PLR (85/15) and a lower printing speed, the dimensional stability increased further, which enabled the hexagonal structure to be printed more precisely. A good print result could also be achieved with the β-TCP/MCPA paste and the PLR 70/30.
KW  - Knochenzemente
KW  - 3D-Druck
KW  - vorgemischt
KW  - Zementpaste
KW  - 3d printing
KW  - premixed
KW  - cement paste
Y1  - 2021
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-230189
ER  -