TY - THES A1 - Seifert, Jürgen T1 - Elektrophysiologische Untersuchung zur Wirksamkeit von Methylphenidat anhand einer Vergleichsuntersuchung von Kindern mit und ohne ADHS T1 - Electrophysiological investigation of the effectiveness of methylphenidate in children with and without ADHD N2 - Ziel der vorliegenden Studie war es, mittels eines weiter entwickelten CPT-Tests (CPT-OX-Paradigma) gewonnener hirnelektrischer Korrelate, die klinische Wirksamkeit von Methylphenidat (MPH) bei Kindern mit Aufmerksamkeitsdefizit-/ Hyperaktivitätsstörung (ADHS) im Kontrollgruppenvergleich experimentell nachzuweisen. 1) Vorgegeben wurden Aufgaben zur Anregung von „Aufmerksamkeit“ und zur „Hemmungskontrolle“ bzw. „Impulsivitätskontrolle“ mittels einer weiter entwickelten Form des Continous- performance- Tests (CPT- OX). Die Kinder mit ADHS wurden unter den entsprechend definierten experimentellen Bedingungen mit und ohne Medikation von je 10 mg MPH untersucht und die evozierten Potentiale mit jenen der Gruppe alters- und geschlechtsgleicher Kontrollkinder verglichen. Als abhängige Variable wurden 21Kanal-ERPs von 17 Jungen mit ADHS, - mit und ohne Methylphenidatmedikation -, sowie von 20 gesunden Kontrollkindern mittels referenzunabhängiger Methoden analysiert. Vier quasi stabile Mikrozustände, welche den Zeitabschnitten der konventionellen ERP-Komponenten P 100, P 200, P 3a und P 3b entsprechen, konnten dabei mittels einer datengetriebenen Segmentierung abgegrenzt werden. Anschließend wurden die P 3a-Amplituden der Kinder mit ADHS – jeweils ohne und mit MPH-Medikation – mit den P 3a-Amplituden der gesunden Kontrollkinder verglichen. Die hypothesengeleitete experimentelle Studie kam zu folgenden wesentlichen Ergebnissen: Im Gruppenvergleich ohne Medikation waren die Amplituden im P 3a-Intervall (257-406 ms post stimulus) sowohl in der Hinweisreiz- als auch in der Hemmreizbedingung, also bei Aufmerksamkeitsanforderung wie auch bei Anforderung zur Impulsivitätskontrolle, bei den nicht medizierten hyperkinetischen Kindern jeweils signifikant niedriger als bei den gesunden Kontrollkindern. 2) Im Gruppenvergleich ergab sich ein signifikanter Medikationseffekt. Die Amplituden im Zeitbereich 3 (P 300) bei den mit Methylphenidat medizierten Kindern mit Aufmerksamkeitsdefizit-/ Hyperaktivitätsstörung unterschieden sich nicht mehr signifikant von den entsprechenden P 3a-Amplituden der gesunden Kontrollkinder. Durch Stimulantienmedikation ließ sich somit eine Normalisierung des hirnelektrischen Korrelats von Aufmerksamkeit und Impulsivitätskontrolle erreichen. Die Interpretation der Ergebnisse führt zu dem Schluss, dass Methylphenidat einen normalisierenden Effekt auf die frühe, hirnelektrisch messbare Reizverarbeitung bei der visuellen Orientierung (Aufmerksamkeit) und Stimuluserkennung (Bewertung von Reizunterschieden) aufweist. Mit dem CPT-OX-Paradigma lassen sich damit zuverlässig elektrophysiologische Korrelate der hirnelektrischen Wirksamkeit von Methylphenidat, in verschiedenen Reizbedingungen, messen. N2 - The Continuous Performance Test (CPT) is an appropriate instrument for assessment of correlates at the brain electrical activity level of attention and response to stimulant medication. The aim of the study was to confirm at the electrophysiological level the clinical effectiveness of methylphenidate (MPH) in children with attention deficit / hyperactivity disorder (ADHD); to this end, a comparative study of hyperactive and healthy control children was undertaken, employing a modified CPT test. Twenty-one channel ERPs from 17 hyperactive boys, with and without MPH treatment, and from 20 healthy control children were analyzed with reference-independent techniques. The resulting quasi-stabile microstates correspond to the time ranges of the conventional ERP components P100, P200 and P300 (with the subcomponents P3a and P3b) and could be discriminated by means of data-based segmentation. The P3a amplitudes of the hyperactive children, in each case with and without MPH medication, were compared with those of healthy controls. P3a segment amplitudes were significantly lower in non-medicated ADHD patients than in healthy children, both following positive and inhibitory stimulus conditions. A significant medication effect was detected following MPH treatment: segment 3 amplitudes in MPH-treated hyperactive children were not significantly different from those of healthy controls. MPH exerts a highly potent effect on stimulus recognition and resulting consequences. Application of the CPT-OX enables the reliable measurement of electrophysiological correlates of the clinical effectiveness of MPH under different stimulus conditions. KW - Aufmerksamkeitsdefitit-/ Hyperaktivitätsstörung KW - ADHS KW - Methylphenidat KW - ereigniskorrelierte Potentiale KW - Continous-Performance-Test KW - Attention-deficit hyperactivity disorder KW - ADHD KW - methylphenidate KW - event-related potentials KW - Continous performance test Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-10155 ER - TY - JOUR A1 - Seifert, Annika A1 - Groll, Jürgen A1 - Weichhold, Jan A1 - Boehm, Anne V. A1 - Müller, Frank A. A1 - Gbureck, Uwe T1 - Phase Conversion of Ice‐Templated α‐Tricalcium Phosphate Scaffolds into Low‐Temperature Calcium Phosphates with Anisotropic Open Porosity JF - Advanced Engineering Materials N2 - The current study aims to extend the material platform for anisotropically structured calcium phosphates to low-temperature phases such as calcium-deficient hydroxyapatite (CDHA) or the secondary phosphates monetite and brushite. This is achieved by the phase conversion of highly porous α-tricalcium phosphate (α-TCP) scaffolds fabricated by ice-templating into the aforementioned phases by hydrothermal treatment or incubation in phosphoric acid. Prior to these steps, α-TCP scaffolds are either sintered for 8 h at 1400 °C or remain in their original state. Both nonsintered and sintered α-TCP specimens are converted into CDHA by hydrothermal treatment, while a transformation into monetite and brushite is achieved by incubation in phosphoric acid. Hydrothermal treatment for 72 h at 175 °C increases the porosity in nonsintered samples from 85% to 88% and from 75% to 88% in the sintered ones. An increase in the specific surface area from (1.102 ± 0.005) to (9.17 ± 0.01) m2 g−1 and from (0.190 ± 0.004) to (2.809 ± 0.002) m2 g−1 due to the phase conversion is visible for both the nonsintered and sintered samples. Compressive strength of the nonsintered samples increases significantly from (0.76 ± 0.11) to (5.29 ± 0.94) MPa due to incubation in phosphoric acid. KW - phase conversion KW - α-tricalcium phosphate Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256311 VL - 23 IS - 5 ER - TY - JOUR A1 - Seifert, Annika A1 - Gruber, Julia A1 - Gbureck, Uwe A1 - Groll, Jürgen T1 - Morphological control of freeze‐structured scaffolds by selective temperature and material control in the ice‐templating process JF - Advanced Engineering Materials N2 - Herein, it is aimed to highlight the importance of the process parameter choice during directional solidification of polymer solutions, as they have a significant influence on the pore structure and orientation. Biopolymer solutions (alginate and chitosan) are directionally frozen, while systematically varying parameters such as the external temperature gradient, the temperature of the overall system, and the temperatures of the cooling surfaces. In addition, the effect of material properties such as molecular weight, solution concentration, or viscosity on the sample morphology is investigated. By selecting appropriate temperature gradients and cooling surface temperatures, aligned pores ranging in size between (50 ± 22) μm and (144 ± 56) μm are observed in the alginate samples, whereas the pore orientation is influenced by altering the external temperature gradient. As this gradient increases, the pores are increasingly oriented perpendicular to the sample surface. This is also observed in the chitosan samples. However, if the overall system is too cold, that is, using temperatures of the lower cooling surface down to −60 °C combined with low temperatures of the upper cooling surface, control over pore orientation is lost. This is also found when viscosity of chitosan solutions is above ≈5 Pas near the freezing point. KW - unidirectional freezing KW - anisotropic porous structures KW - morphology controls KW - systematic investigations Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-256330 VL - 24 IS - 3 ER -