TY - THES A1 - Weber, Manuel T1 - Synthese, Charakterisierung und Eigenschaften neuartiger carboranyl-substituierter NHC-Liganden und Anwendung in der Metallkomplex-Chemie T1 - Synthesis, characterisation and properties of novel carboranyl-substituted NHC ligands and application in metal complex chemistry N2 - Im Fokus der Dissertation stand die Synthese von Vorstufen (Imidazoliumsalze) für NHC-Liganden sowie die Umsetzung dieser Verbindungen zu N-heterocyclischen Carbenen unter Verwendung des Carba-closo-dodecaborat-Anions. Hierbei wurde der Cluster über die Position B12 oder B7 an das Stickstoffatome des Imidazols gebunden. Zur Synthese wurden unterschiedliche Routen ausgehend von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(12-PhI-closo-1-CB_{11}H_{11}\) sowie den entsprechenden 7-Isomeren untersucht und miteinander verglichen. Die isomerenreinen Synthesen wurden hinsichtlich ihrer Vor- und Nachteile untersucht und so optimiert. Es wurden sowohl unsymmetrische Imidazoliumsalze mit dem Carba-closo-dodecaborat-Anion auf der einen Seite und Alkyl- oder Arylreste (Butyl, Methyl, Phenyl, p-Methoxyphenyl, p-Fluorphenyl-, Vinyl-, Benzyl- und Mesitylsubstituenten) als auch die symmetrische Variante mit zwei Carboranylcluster synthetisiert. Besonders hervorzuheben ist hierbei, dass die Synthese des Bis(1,3-Carboran-12-yl)imidazolatanions in einer Buchwald-Hartwig-Kreuzkupplungsreaktion durch Umsetzung der Reagenzien \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}]\) durch 1 zu 1 Umsetzung miteinander reagiert haben. In den meisten bisher literaturbekannten und im Rahmen der Doktorarbeit untersuchten Buchwald-Hartwig-Kreuzkupplungsreaktionen sind 4-14 Äquivalente des Amins notwendig. Darüberhinaus erfordert das Amin häufig eine Aktivierung durch Umsetzung zu Lithiumorganylen. Dies war bei der Umsetzung von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) mit \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}] \) nicht notwendig und zeigt den starken elektronenschiebenden Effekt des Clusters auf. Die unsymmetrischen Imidazoliumsalze konnten durch Umsetzung mit n-Butyllithium zu C2-NHC-Derivate umgesetzt werden. Bei der Umsetzung des Bis(1,3-Carboran-12-yl)imidazolatanions bildete sich zunächst ein Gemisch aus dem C2- und C5-Isomer, des Weiteren ist anteilig auch die Deprotonierung am Clusterkohlenstoffatom aufgetreten. N2 - The dissertation focused on the synthesis of precursors (imidazolium salts) for NHC ligands and the conversion of these compounds to N-heterocyclic carbenes using the carba-closo-dodecaborate anion. Here, the cluster was attached to the nitrogen atom of the imidazole via the B12 or B7 position. For synthesis, different routes starting from \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(12-PhI-closo-1-CB_{11}H_{11}\) as well as the corresponding 7-isomers were investigated and compared. The isomerically pure syntheses were investigated with respect to their advantages and disadvantages and thus optimised. Both asymmetric imidazolium salts with the carba-closo-dodecaborate anion on one side and alkyl or aryl residues (butyl, methyl, phenyl, p-methoxyphenyl, p-fluorophenyl, vinyl, benzyl and mesityl substituents) and the symmetric variant with two carboranyl clusters were synthesised. Of particular note here is that the synthesis of the bis(1,3-carboran-12-yl)imidazolate anion was achieved in a Buchwald-Hartwig cross-coupling reaction by reacting the reagents \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11}]\) by 1 to 1 reaction. In most of the Buchwald-Hartwig cross-coupling reactions known so far in the literature and investigated in the doctoral thesis, 4-14 equivalents of the amine are required. Furthermore, the amine often requires activation by conversion to lithium organyls. This was not necessary in the reaction of \(Cs[12-I-closo-1-CB_{11}H_{11}]\) with \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11})\), demonstrating the strong electron-pushing effect of the cluster. The unsymmetrical imidazolium salts could be converted to C2-NHC derivatives by reaction with n-butyllithium. During the reaction of the bis(1,3-carboran-12-yl)imidazolate anion, a mixture of the C2 and C5 isomer was initially formed, and furthermore, deprotonation also occurred proportionally at the cluster carbon atom. KW - NHC KW - N-Heterocyclische Carbene KW - Carboranylsubstituierte NHC KW - NHC-Gold(I)-Komplexe KW - NHC-Selenkomplexe KW - Imidazolatsalze KW - Imidazoliumsalze Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258143 ER - TY - THES A1 - Landmann, Johannes T1 - Cyanoborate: Synthesen, Ionische Flüssigkeiten und Koordinationsverbindungen sowie die Chemie des Bor-zentrierten Nukleophils B(CN)\(_3\)\(^2\)\(^-\) T1 - Cyanoborates: Syntheses, Ionic Liquids and coordination compounds and the chemistry of the boron-centred nucleophile B(CN)\(_3\)\(^2\)\(^-\) N2 - Diese Arbeit beschäftigt sich mit der Synthese, Reaktivität und den physikalischen Eigenschaften verschiedener Cyanoborate. Es gelang die optimierte Synthese des Tricyanofluoroborates M[BF(CN)3] (M = Na, K) mittels Lewis-Säure-Katalyse. Aus diesem Borat wurde mittels Reduktion das Bor-zentrierte Nukleophil B(CN)3 2− hergestellt, welches ebenfalls über die äußerst ungewöhnliche Depronotierung des [BH(CN)3]− -Anions zugänglich ist. Das B(CN)3 2− -Dianion wurde erfolgreich mit diversen Elektrophilen wie z.B. Alkylhalogeniden, CO2, CN+-Quellen sowie per- und teilfluorierten Aromaten umgesetzt. Darüber hinaus ergibt die Synthese mit Tricyanohalogenoborat-Anionen das ungewöhnlich stabile gekoppelte Diborat-Dianion [B2(CN)6]2−, welches über einen SN2-Mechanismus entsteht und eine elektronenpräzise B-B-Bindung aufweist. Ferner wurden Ionische Flüssigkeiten mit Perfluoraklylcyanoboraten hergestellt und die physikalischen Parameter systematisch und ausführlich untersucht. N2 - In this work the syntheses, reactivity and physical properties of different cyanoborates are presented. The synthesis of the tricyanofluoroborates M[BF(CN)3] (M = Na, K) was optimized via a Lewis-acid-catalysis. Reducing this anion resulted in the formation of the boron-centered nucleophile B(CN)3 2−, which is accessible by the highly unusual deprotonation of [BH(CN)3]−, too. The B(CN)3 2− -dianion was successfully treated with various electrophiles such as alkylhalides, CO2, CN+ -sources as well as partly and perfluorinated arenes. Moreover, the synthesis with halidotricyanoborate anions provide the unusually stable coupled diborat-dianion [B2 (CN)6]2−, which is formed via a SN2-mechanismusm and exhibits an electron-precise B-B-bond. Furthermore, Ionic Liquids based on perlfuorocyanoborates were synthesized and their physical properties were studied systematically in detail. KW - Borate KW - Koordinationsverbindungen KW - Nucleophile Substitution KW - Viskosität KW - Elektrische Leitfähigkeit KW - Ionische Flüssigkeiten KW - Cyanoborate KW - Nukleophiles Bor KW - Diboran(6)-Verbindung KW - Umpolung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155469 ER - TY - THES A1 - Kachel, Stephanie T1 - Element-Element-Bindungsaktivierungen und Carben-Boran-Adduktdarstellungen durch vicinale Biscarbenoide T1 - Element-element bond activations and carbene-borane adduct representations by vicinal biscarbenoids N2 - Im Rahmen der vorliegenden Arbeit wurde das vicinale Biscarbenoid Bis(piperidyl)acetylen eingesetzt um neben Bindungsaktivierungen, auch Carben-Addukte darzustellen. Im ersten Abschnitt liegt der Fokus auf der Reaktivität des Acetylens gegenüber 1,3-dipolaren Reagenzien. Dies führte auf Grund der carbenoiden Eigenschaften des Acetylens, neben der Ausbildung heterocyclischer Additionsprodukte, zu Bindungsaktivierungen. Der zweite Abschnitt befasst sich mit der Darstellung von Carben-Boran-Addukten, die anhand ihrer strukturellen und spektroskopischen Parameter miteinander verglichen und eingehend untersucht wurden. In dieser Arbeit wird die Reaktivität des Bis(piperidyl)acetylens auf Nebengruppen-Metallkomplexe erweitert. N2 - The vicinal biscarbenoid bis(piperidyl)acetylene was used to prepare carbene adducts in addition to bond activations. In the first section, the focus is on the reactivity of acetylene towards 1,3-dipolar reagents. This led to bond activations due to the carbenoid properties of acetylene and to the formation of heterocyclic addition products. The second section deals with the preparation of carbene-borane adducts, which were compared and studied in detail based on their structural and spectroscopic parameters. In this work, the reactivity of bis(piperidyl)acetylene is extended to side-group metal complexes. KW - Carbenoide KW - Bindungsaktivierungen KW - Bindungsaktivierung KW - Biscarbenoide KW - Carben-Boran-Addukte Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-253291 ER - TY - THES A1 - Rang, Maximilian T1 - Metallähnliche Reaktivität \(in\) \(situ\) erzeugter Borylene T1 - Metallomimetic reactivity of transiently generated borylenes N2 - Einfach Lewis-Basen stabilisierte Borylene wurden durch Reduktion in situ hergestellt und in Gegenwart von Kohlenstoffmonoxid oder Distickstoff umgesetzt. Die entstandenen Verbindungen wurden mittels NMR-, ESR-, UV/Vis- und IR-Spektroskopie sowie Einkristallröntgenstrukturanalyse charakterisiert. Im Zuge dessen konnten für die erhaltenen Spezies Eigenschaften ermittelt werden, die denen analoger Übergangsmetallkomplexe ähneln. Ferner konnten die zugrundeliegenden mechanistischen Vorgänge der Reaktionen durch gezielte Variation der Reaktionsparameter aufgeklärt werden. Zudem wurden Redoxverhalten und Reaktivitäten der isolierten Produkte in weiterführenden Studien näher untersucht. N2 - Mono(Lewis base)-stabilized borylenes were transiently generated by reduction and converted in the presence of carbon monoxide or dinitrogen. The resulting compounds were characterized by means of NMR, EPR, UV-vis and IR spectroscopy as well as X-ray diffraction analysis. The properties determined for the isolated species in the course of these investigations closely resemble those of analogous transition metal complexes. Furthermore, it was possible to elucidate the mechanistic processes underlying the reactions through systematic alteration of the reaction parameters. Additionally, the redox behaviour and reactivities of the isolated products were examined more closely. KW - Bor KW - Distickstoff KW - Kohlenstoffmonoxid KW - Borylene KW - niedervalente Borverbindungen KW - Distickstoff Aktivierung KW - Distickstoff Spaltung KW - Borylencarbonyle KW - Kohlenmonoxid KW - cAAC Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240465 ER - TY - THES A1 - Brückner, Tobias Walter T1 - Lewisbasenstabilisierte Bor-Bor-Mehrfachbindungssysteme - Darstellung und Reaktivitätsstudien T1 - Lewis base stabilized boron-boron multiple binding systems - Synthesis and reactivity N2 - Diese Dissertation befasst sich mit der Darstellung und Reaktivität von Lewisbasenstabilisierten Bor-Bor-Mehrfachbindungssystemen. Besonderes Augenmerk lag hierbei auf der Aktivierung von Element-Wasserstoff-Bindungen von Boranen, Aminen, Silanen und Phosphanen durch NHC-stabilisierte Diborine. Des Weiteren wurde die Aktivierung von Bor-Bor-, sowie Phosphor-Phosphor-Einfachbindungen untersucht. Zusätzlich wurde die Reaktivität gegenüber Carbenen und aromatischen Stickstoffbasen näher beleuchtet. N2 - This dissertation deals with the representation and reactivity of Lewis base-stabilized boron-boron multiple bond systems. Special attention was paid to the activation of element-hydrogen bonds of boranes, amines, silanes and phosphanes by NHC-stabilized diborins. Furthermore, the activation of boron-boron and phosphorus-phosphorus single bonds was investigated. In addition, the reactivity towards carbenes and aromatic nitrogen bases was investigated. KW - Diborine KW - Bor KW - boron KW - Diborine KW - Diborene KW - Lewisbasen KW - diborynes KW - diborenes KW - lewis bases KW - Bor KW - Mehrfachbindung KW - Lewis-Base Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213479 ER - TY - THES A1 - Kelch, Hauke T1 - Synthese und Reaktivität neuer Bor-haltiger Heterocyclen UND Element-Element-Bindungsaktivierungen durch vicinale Biscarbenoide T1 - Synthesis and Reactivity of Novel Boron Containing Heterocycles AND Element-Element-Bond Activation via Vicinal Biscarbenoids N2 - Teil 1: Synthese und Reaktivität neuer Bor-haltiger Heterocyclen Im Rahmen der vorliegenden Arbeit wurden Versuche unternommen, neue Borolverbindungen auf Basis des 2,3,4,5-Tetrakis(pinakolboryl)buta-1,3-diendiyl-Rückgrates mit unterschiedlichen Substituenten am Borzentrum darzustellen. Des Weiteren wurde ein neues Borolsystem auf Basis des Tetraphenylbutadien-Gerüstes synthetisiert, das die elektronenziehende Perfluorphenylgruppe als Bor-ständigen Substituenten trägt. Durch experimentelle Gegenüberstellung der strukturellen und spektroskopischen Parameter konnte - unterstützt durch quantenchemische Berechnungen - der Einfluss der Rückgratsubstitution eingehend untersucht werden. Teil 2: Element-Element-Bindungsaktivierungen durch vicinale Biscarbenoide Im Rahmen der vorliegenden Arbeit wurde das vicinale Biscarbenoid Bis(piperidyl)acetylen eingesetzt um die Reaktivität dieser Verbindungsklasse gegenüber Lewis-sauren Hauptgruppenelementverbindungen aufzuklären. N2 - Part 1: Synthesis and Reactivity of Novel Boron Containing Heterocycles The synthesis of novel 2,3,4,5-tetrakis(pinacolatoboryl) substituted boroles has been attempted in this work. A novel borole based on the tetraphenyl backbone has been synthesized using the electron withdrawing perfluorphenyl substituent at boron, allowing accurate determinaton of the backbone influence on the electronic properties of boroles. Part 2: Element-Element Bond Activation via Vicinal Biscarbenoids The vicinal biscarbenoid bis(piperidyl)acetylene was used to probe the reactivity of this class of compounds towards Lewis-acidic main group reagents. KW - Borheterocyclen KW - Carbenoide KW - Bindungsaktivierung KW - Umlagerung KW - Antiaromatizität Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153951 ER - TY - THES A1 - Duda, Katharina T1 - Synthesen und Eigenschaften von Dicarba-closo-dodecaboran-Derivaten und ersten gemischten Fluorohydridoborat-Anionen T1 - Syntheses and properties of dicarba-closo-dodecaborane derivatives and first mixed fluorohydridoborate anions N2 - Ein wesentliches Ziel dieser Arbeit war die Durchführung von regioselektiven Deborierungsreaktionen von 1,7-Dicarba-closo-dodecaboranen sowie die Herstellung von polyfunktionalisierten meta-Carboran-Derivaten. Die synthetisierten {nido-7,9-C2B9}- und {closo-1,7-C2B10}-Derivate und ausgewählte ortho-Carboran-Derivate wurden nach erfolgter Kumada-artiger Kreuzkupplungsreaktion bzgl. ihrer Koordinationschemie untersucht. Die ethinylfunktionalisierten Borcluster wurden als Edukte für die Herstellung von Gold(I)-Komplexen genutzt. Weitere Ziele dieser Arbeit waren außerdem die Synthese und umfassende Charakterisierung des gemischten Fluorohydridoborat-Anions [BHF3]− und der carboranylsubstituierten Borat-Anionen [1-HF2B-closo-1,2-C2B10H11]− und [1-HF2B-9,12-I2-closo-1,2-C2B10H9]− sowie die Untersuchung hinsichtlich ihrer Folgechemie. N2 - An essential aim of the presented work was the investigation of regioselective deboronation reactions of 1,7-dicarba-closo-dodecaboranes as well as the preparation of poly-functionalized meta-carboranes. After the {nido-7,9-C2B9}-, {closo-1,7-C2B10}- and selected ortho-carborane derivates were prepared by a Kumada-type cross coupling reaction, the behaviour of these compounds in coordination chemistry was examined. The ethynyl-functionalised boron clusters were used as educts for the preparation of gold(I) complexes. Further objectives of this work were the synthesis and complete characterisation of the mixed fluorohydridoborate anion [BHF3]− and of the carboranyl substituted anions [1-HF2B-closo-1,2-C2B10H11]− and [1-HF2B-9,12-I2-closo-1,2-C2B10H9]− and in further applications in syntheses. KW - Carborane KW - Fluoroborate KW - regioselektive Deborierungsreaktionen KW - Gold(I)-Komplexe KW - gemischte Fluorohydridoborat-Anionen KW - Cluster-Aufbau Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-181038 ER - TY - THES A1 - Gernert, Markus Stefan T1 - Lumineszenzverhalten von Kupfer(I)- und Zink(II)-verbindungen mit N-heterozyklischen Carbenen als π-Chromophorliganden T1 - Luminescence characteristics of copper(I) and zinc(II) compounds with N-heterocyclic carbenes as π-chromophore ligands N2 - Zu Beginn dieser Arbeit galten Kupfer(I)-emitter als vielversprechende Alternativen zu den bis dato führenden Iridium(III)-emittern, waren dabei aber nur sehr selten tatsächlich kompetitiv. Die oftmals verwendenten chelatisierenden Diimin- bzw. Phosphanliganden als π-Chromophorligand ermöglichten bei diesen Kupfer(I)-emittern die Nutzung von TADF als Emissionsmechanismus, womit in seltenen Fällen strahlenden Ratenkonstanten von kr > 105 s-1 erreicht wurden. Diese Werte konnten allerdings nicht für den gesamten sichtbaren Spektralbereich erzielt werden, was auf eingeschränkte Modifikationsmöglichkeiten sowie unvollständige Struktur-Eigenschafts-Beziehungen zurückgeführt werden kann. Erklärtes Ziel dieser Arbeit war es folglich, die Modifikationsmöglichkeiten von Kupfer(I)-emittern deutlich zu vergrößern. Hierbei wurde besonderes Augenmerk auf die Verwendung von Carbenen als monodentaten π-Chromophorliganden gelegt. Ausgehend von MeCAAC bzw. verschiedenen CAArCs konnte eine Bandbreite von Kupfer(I)- sowie Zink(II)-verbindungen synthetisiert sowie charakterisiert werden. Die durchgeführten Photolumineszenzstudien zeigen eindrucksvoll die Chromophoreigenschaften der verwendeten Carbene auf, werden doch Quantenausbeuten bis nahezu 1 sowie strahlende Ratenkonstanten von bis zu 9·105 s-1 erreicht. Es gelang somit also, Kupfer(I)-carbenverbindungen als vielversprechende Emitterklasse zu etablieren. In einem zweiten Bereich wurden anschließend erste Versuche unternommen, die gewonnen Erkenntnisse auf das Feld der Zink(II)-carbenverbindungen zu übertragen. Dabei konnten wichtige Erkenntnisse hinsichtlich Struktur und Stabilität Zink(II)-MeCAAC-verbindungen erhalten werden. N2 - At the beginning of this work, copper(I) emitters were regarded as promising alternatives to the hitherto leading iridium(III) emitters, although they were only very rarely truly competitive. The often used chelating diimine or phosphane ligands as π-chromophore ligands enabled the use of TADF as emission mechanism for these copper(I) emitters, thus achieving radiative rate constants of kr > 105 s-1 in rare cases. However, these values could not be obtained for the entire visible spectral range, which can be attributed to limited modification possibilities as well as incomplete structure-property relationships. Consequently, the stated goal of this work was to significantly increase the modification possibilities of copper(I) emitters. In this regard, particular attention was paid to the use of carbenes as monodentate π-chromophore ligands. Starting from MeCAAC or various CAArCs, a range of copper(I) as well as zinc(II) compounds could be synthesized as well as characterized. The photoluminescence studies carried out impressively demonstrate the chromophor properties of the carbenes used, as quantum yields of up to almost 1 and radiative rate constants of up to 9·105 s-1 are achieved. It was thus possible to establish copper(I) carbene compounds as a promising emitter class. In a second area, initial attempts were then made to transfer the knowledge gained to the field of zinc(II) carbene compounds. In the process, important findings were obtained with regard to the structure and stability of zinc(II) meCAAC compounds. KW - Photolumineszenz KW - Kupferverbindungen KW - Zinkverbindungen KW - Heterocyclische Carbene <-N> KW - Lumineszenzverhalten Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-231099 ER - TY - THES A1 - Saalfrank, Christian T1 - Lewis-Basen stabilisierte, aromatische Verbindungen des Bors : Darstellung und Reaktivität T1 - Lewis-base stabelized, aromatic compounds of boron - synthesis and reactivity N2 - Die vorliegende Arbeit befasst sich mit der Darstellung und Untersuchung cyclischer konjugierter Systeme des Bors. Hierbei wurden die zentralen Ringeinheiten der organischen Analoga mit zwei Boratomen in 1,4-Position substituiert. 1 Darstellung und Eigenschaften des CyCAAC-stabilisierten 1,4 Diborabenzols (87) Die Darstellung eines weiteren Vertreters des basenstabilisierten 1,4-Diborabenzols orientierte sich an vorangegangen Arbeiten der Gruppe um Braunschweig auf diesem Gebiet. Das Cyclohexyl-CAAC koordinierte Diboracumulen (85) wurde unter einer gereinigten Acetylen-atmosphäre mit einem Druck von etwa 1 bar gerührt. Quantenchemische Rechnungen ergaben einen NICS(0)-Wert von –2.6483 des [B2C4]-Rings (vgl. NICS(0)Benzol: –8.1723; B3LYP/Def2SVP Niveau) und bestätigten zusätzlich die Bildung eines Ringstroms bzw. eines aromatischen Systems. Umsetzungen des Diborabenzols 87 mit den Alkalimetallen Lithium und Natrium wurden durchgeführt und die entsprechenden dianionischen Verbindungen 88 und 89 erhalten. Unter gleichen Reaktionsbedingungen wurden im Falle des Kaliums Einkristalle erhalten deren röntgenkristallographische Untersuchung den Konnektivitätsbeweis für das Monoanion 90 liefern. 2 Synthese und Umsetzungen CAAC-stabilisierter 9,10 Diboraanthracene Die Darstellung des 9,10-(Dibromo)diboraanthracens 63 entlehnt sich der Literatur und findet durch eine Abfolge von Salzmetathesereaktionen zwischen o(Bistrimethylsilyl)benzol (65) und Bortribromid statt. Nach der Koordination der CAAC-Liganden an 63 wurde die schrittweise reduktive Abstraktion der Bromatome möglich. Die Einelektronreduktionen von 92 und 93 lieferten nicht, wie erwartet, neutrale gemischtvalente Systeme. Röntgenkristallographische Untersuchungen an geeigneten Einkristallen der Verbindung 99 zeigten, dass sich eine salzartige Struktur bildete. Bei der Reduktion von 93 wurden beide Bromidreste abgespalten und das Diboraanthracenfragment liegt als Radikalkation vor. Die zweifache Reduktion der Verbindungen 92 und 93 liefert ebenfalls Produkte, die keine 11B-NMR-Resonanz zeigen. Dieser Umstand spricht erneut für die Generierung offenschaliger Systeme. Die Röntgenstrukturanalyse geeigneter Einkristalle der beiden erhaltenen Produkte 103 und 104 zeigte, dass die neutrale Diboraanthracenspezies gebildet wurde (Schema 58). ESR-Experimente bei tiefen Temperaturen lieferten Einsicht über den elektronischen Grundzustand der beiden Verbindungen 103 und 104. Die beiden Verbindungen liegen, unter den gewählten Bedingungen, im open shell-Singulett-grundzustand vor. Es ergeben sich Singulett-Triplett-Abstände ΔES→T = 0.43 kJ/mol (4.46 meV) für 103 bzw. ΔES→T = 2.3 kJ/mol (23.8 meV) für 104. Die Reduktion von 92 mit einem Überschuss von Lithium lässt die Darstellung des dianionischen Diborataanthracens 110 zu. Unter photochemischen Bedingungen bildet 103 eine zwitterionische Spiroverbindung 113, durch die Insertion eines Boratoms in den Pyrrolidinring des koordinierten CAAC-Liganden. Weiterhin sind 103 und 104 geeignete Ausgangsmaterialien zur Aktivierung kleiner Moleküle unter milden Bedingungen. Die Umsetzung der MeCAAC-Spezies 103 mit elementarem Schwefel liefert Verbindung 128, bei der eine S3-Brücke zwischen den Boratomen insertiert wird. Im Falle des CyCAAC-Diboraanthracens 104 konnte die Koordination eines CO-Moleküls an die Boratome (140) nachgewiesen werden. Zusätzlich konnten, durch die Darstellung des Halbsandwichkomplexes 149, erste Einsichten in die Verwendung des Diboraanthracens (104) als Ligand in der Übergangsmetallchemie gewonnen werden (Schema 60). Der Halbsandwichkomplex [η6-(9,10-(CyCAAC)2DBA)Cr(CO)3] (149) wurde durch die Zugabe von 104 zu [(MeCN)3Cr(CO)3] dargestellt und das zugehörige IR-Spektrum der Verbindung 149 identifiziert 104 als starken Elektronendonorliganden. N2 - This thesis deals with the synthesis and examination of cyclic conjugated systems of boron. The central ring-moiety of the organic analogues were substituted with two boron centres in 1,4-position. 1 Synthesis and properties of a CAAC-stabilized 1,4 diborabenzene (87) The synthesis of an additional example of base-stabilized 1,4-diborabenzene follows preceding studies of the Braunschweig´s research group on this topic. The cyclohexyl-CAAC coordinated diboracumulene (84) was stirred under an atmosphere of purified acetylene with a pressure of approximately 1 bar. Quantum chemical calculations, conducted on 87 established a NICS(0) value of –2.6483 at the [B2C4]-ring (cf. NICS(0)benzene: –8.1723; B3LYP/Def2SVP-level of theory) confirming the existence of a ring current and thus aromaticity of this system. Reaction of the diborabenzene 87 with the alkali metals lithium and sodium were performed and the corresponding dianionic compounds (88) and (89) were generated. Instead, for the reduction with potassium, under similar reaction conditions, single crystals were obtained that provided the evidence for the connectivity of the monoanionic species (90) by X-ray diffraction. 2 Synthesis and reactivity of CAAC stabilised 9,10 diboraanthracenes The synthesis of 9,10‐(dibromo)diboraanthracene 63 was performed according to a published procedure that follows a series of salt‐metathesis reactions of o‐bis(trimethylsilyl)benzene (65) and borontribomide. After the coordination of the CAAC ligands to compound 90 the stepwise reductive abstraction of the bromides was performed (Scheme 3). A single electron reduction of 92 and 93 did not result in the expected neutral mixed valence systems but instead provided products that did not show an 11B NMR-spectroscopic signal. X Ray crystallographic examination of suitable single crystals of the compound 93 showed a salt-like structure. Both bromides of 93 had been abstracted, leaving the diboraanthracene fragment as a radical cation. The double reduction of 92 and 93 also yielded 11B-NMR silent products, again suggesting the presence of open-shell systems. X-Ray diffraction of suitable single crystals of the obtained compounds 103 und 104 indicate the formation of the desired neutral diboraanthracene species In the solid state. Low temperature EPR-experiments gave insights into the electronic ground state of the compounds 103 und 104. Singlet-triplet gaps were deduced to be ΔES→T = 0.43 kJ/mol (4.46 meV) for 103 and ΔES→T = 2.3 kJ/mol (23.8 meV) for 104. Both compounds are present in open shell singlet ground state. The reduction of 92 with an excess of elemental lithium permitted the synthesis of the dianionic diborataanthracene 110. Under photochemical conditions by insertion of a boron atom into the pyrrolidine moiety of the coordinated CAAC ligand 103 forms a zwitterionic spiro-compound 113. Furthermore, 103 und 104 were found to be suitable reagents for the activation of small molecules under mild conditions. The reaction of MeCAAC-species 103 with elemental sulfur yields compound 128 with an S3 bridge between the boron atoms. For the CyCAAC-stabilized diboraanthracene 104 the coordination of a CO molecule to the boron atoms was observed (140). Additionally, initial insights were obtained into the ability of the diboraanthracene 104 to act as a ligand in transition metal chemistry by the synthesis of the halfsandwich-compound 149. The half sandwich complex [η6-(9,10-(CyCAAC)2DBA)Cr(CO)3] (149) was prepared by the addition of 104 to [(MeCN)3Cr(CO)3] and the IR-spectrum of 149 indicated that compound 104 is a strongly electron donating ligand. KW - Diradikal KW - Heteroacene KW - Anthracenanaloga KW - Offenschaliges System KW - Bor-11 KW - open-shell Singulett Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210578 ER - TY - THES A1 - Schmidt, Uwe T1 - Sandwich- und Halbsandwich-substituierte Diborene – Synthese, Eigenschaften und Reaktivität T1 - Sandwich- and half sandwich-substituted diborenes – synthesis, properties and reactivity N2 - Innerhalb der vorliegenden Arbeit ist es gelungen, durch das Einführen von Cymantrenylresten neue Diborene darzustellen, welche Halbsandwich-Substituenten tragen und somit das Substitutionsmuster von basenstabilisierten Diborenen um eine weitere Verbindungsklasse zu erweitern. Neben Cymantrenylresten gelang es auch, Ferrocenylreste als weitere Substituenten in entsprechende Diborensysteme einzuführen. Über die Darstellung neuer Diborensysteme hinaus, waren Reaktivitätsstudien am Diboraferrocenophan 29 ebenso ein wesentlicher Bestandteil der vorliegenden Arbeit. Es konnte gezeigt werden, dass 29 mit kleinen Lewis-Basen, Element-Wasserstoff-Verbindungen und Hydrierungsreagenzien zur Reaktion gebracht werden kann. N2 - The work in this project resulted in the synthesis of new diborenes with cymantrenyl substituents. With these half-sandwich substituents it was possible to expand the substitution pattern of base-stabilized diborenes by further examples. In addition to cymantrenyl substituents, ferrocenyl substituents were introduced into the corresponding diborene systems. In addition to the synthesis of new diborene systems, reactivity studies on the diboraferrocenophane 29 constituted another major component of the present work. It was shown that 29 reacts with small Lewis-bases, element-hydrogen compounds, and hydrogenation reagents. KW - Diborene KW - Mehrfachbindung KW - Cymantren KW - Ferrocen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234601 ER - TY - THES A1 - Härterich, Marcel T1 - Synthese und Reaktivität niedervalenter borhaltiger Verbindungen der Oxidationsstufe +1 T1 - Synthesis and reactivity of low-valent boron-containing compounds in the oxidation state +1 N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Reaktivitat niedervalenter borhaltiger Verbindungen der Oxidationsstufe +I, sowie der Darstellung eines neuen zweizähnigen Carbens. Von zentraler Bedeutung waren dabei Verbindungen aus der Substanzklasse der cAACs, die sowohl als stabilisierende Lewis-Basen der Diborene und Borylene zum Einsatz kamen, als auch das Grundgerüst des neuen Carbens bilden. Zunächst stand die Synthese eines neuen Diborens im Fokus, wobei Cyclohexylsubstituenten am Pyrrolidingerust des cAACs verwendet wurden. Die Reaktivitätsstudien wurden anschließend am Diboren mit dem methylsubstituierten cAAC-Derivat durchgeführt. Dabei konnte neben der 1,2-Addition von Wasser die Insertion von Acetylen in die BB-Bindung, sowie die Spaltung durch die Reaktion mit diversen Aziden beobachtet werden. Darüber hinaus gelingt die vollständige Separierung beider Boratome in zwei getrennte Moleküle bei der Umsetzung mit Kohlenstoffdioxid in einer Reaktionssequenz aus [2+2]-Cycloaddition und -reversion. Das dabei erhaltene Hydroborylen wurde im zweiten Teil der Arbeit hinsichtlich seiner Reaktivität untersucht. Gerade die Carbonylfunktionalität erlaubte hierbei den Zugang zu vielfältigen Reaktionsprodukten. Unter anderen kann der Carbonylsubstituent in ein Alkin oder ein Nitril überführt werden. Zudem kann die, aus der Übergangsmetall-Carbonylchemie bekannte, Fischer-Carben Synthese am Borylen reproduziert werden und stellt somit ein metallomimetisches Verhalten der Borylene zur Schau. Der letzte Teil befasst sich mit der Darstellung eines zweizähnigen Carbenliganden, wobei der Nachweis des freien Carbens indirekt mittels Abfangreaktionen gelang. N2 - The present work deals with the synthesis and reactivity of low-valent boron-containing compounds of oxidation state +I, as well as the preparation of a new bidentate carbene. Compounds from the substance class of cAACs were of central importance, since they were used both as stabilizing Lewis bases of the diborenes and borylenes and also represent the generic framework of the newly synthesised. Firstly, this work focused on the synthesis of a new diborene using cyclohexyl substituents on the pyrrolidine residue of the cAAC. Reactivity studies were then performed on the diborene with the methyl-substituted cAAC. In addition to the 1,2-addition of water, the insertion of acetylene into the BB bond as well as the bond cleavage upon treatment with various azides was observed. Moreover, the complete separation of both boron atoms into two separate molecules succeeds upon reaction with carbon dioxide in a reaction sequence of [2+2]-cycloaddition and -reversion. The hydroborylene obtained from the reaction with CO2 was investigated in the second part of the work with respect to its reactivity. The carbonyl functionality in particular allowed access to a wide range of structural motifs. Among others, the carbonyl substituent can be converted into an alkyne or a nitrile. In addition, the Fischer-Carben synthesis, known from transition metal carbonyl chemistry, can be reproduced on the borylene, thus exhibiting a metallomimetic behavior of the borylene. The last part deals with the preparation of a bidentate carbene ligand, where the detection of the free carbene was achieved indirectly by means of trapping reactions. KW - Bor KW - Doppelbindung KW - Borylene KW - Carbene KW - Reaktivität KW - Diboren KW - Borylen KW - Carben KW - Niedervalent Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-317605 ER - TY - THES A1 - Dietz, Maximilian T1 - Synthese und Reaktivität neutraler Diboraarene T1 - Synthesis and Reactivity of Neutral Diboraarenes N2 - Die vorliegende Arbeit befasst sich mit der Darstellung und Reaktivität neutraler Diboraarene, wobei im ersten Teil die Synthese neuer Metallkomplexe eines cAAC-stabilisierten (cAAC = cyclisches Alkyl(amino)carben) 1,4-Diborabenzols sowie deren Folgereaktivität im Fokus steht. Im zweiten Abschnitt wird die Reaktivität des Diborabenzols und eines cAAC-stabilisierten 9,10-Diboraanthracens gegenüber Hauptgruppenelementverbindungen untersucht und vergleichend gegenübergestellt. Darauffolgend werden neben der Synthese neuer Metallkomplexe des Diboraanthracens auch weitere Reaktivitätsuntersuchungen der Verbindung behandelt. Der letzte Teil der Arbeit befasst sich mit der Darstellung neuartiger neutraler und cAAC-stabilisierter Diboraacene über eine Modulation des π-Systems. Dabei wird der synthetische Zugang zu einem 1,4-Diboranaphthalin und einem 6,13-Diborapentacen ermöglicht und ausgewählte Reaktivitäten beider Verbindungen demonstriert. N2 - The work presented herein deals with the preparation and reactivity of neutral diboraarenes, focusing in the first part on the synthesis of new metal complexes of a cAAC-stabilized (cAAC = cyclic alkyl(amino)carbene) 1,4-diborabenzene and their subsequent reactivity. In the second section, the reactivity of diborabenzene and a cAAC-stabilized 9,10-diboraanthracene towards main group element compounds is investigated in a comparative study. Subsequently, in addition to the synthesis of new metal complexes of diboraanthracene, further reactivity studies of the compound are also discussed. The last part of the work covers the preparation of novel neutral and cAAC-stabilized diboraacenes via modulation of the π system. Synthetic access to a 1,4-diboranaphthalene and a 6,13-diborapentacene is provided and selected reactivity patterns of both compounds are demonstrated. KW - Bor KW - Aromaten KW - Metallkomplexe KW - Diborabenzol KW - Diboraarene KW - Diboraacene KW - Arenkomplexe KW - Biradikale Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-321098 ER -