TY - THES A1 - Böhnke, Julian T1 - Reaktivität niedervalenter, Carben-stabilisierter Bor-Bor-Mehrfachbindungssysteme T1 - Reactivity of low-valent, carbene-stabilized boron-boron multiple bonds N2 - Im Rahmen dieser Arbeit war es möglich, vielfältige Reaktivitäten des Diborakumulens (7) und davon abgeleiteter Verbindungen zu untersuchen. Häufig begründet in den bemerkenswerten elektronischen Eigenschaften der verwendeten CAAC-Liganden, konnten neuartige und teilweise ungewöhnliche Bindungsmodi an niedervalenten Borspezies beobachtet werden. Der Einfluss der starken σ-Donor-Fähigkeiten und der hohen π-Acidität der cyclischen (Alkyl)(amino)carbene spiegeln sich hierbei in vergleichenden Reaktivitätsstudien mit den entsprechenden NHC-stabilisierten Bor–Bor-Mehrfachbindungssystemen wider. Zunächst wurde jedoch auf die Synthese weiterer Diborakumulene eingegangen und am Beispiel der Bis(CAACCy)-stabilisierten B2-Einheit (12) erfolgreich durchgeführt. Mit vergleichbaren 11B-NMR-Verschiebungen und Bindungslängen unterscheidet sich die Verbindung in ihren elektronischen Eigenschaften kaum von B2(CAAC)2 (7), welches aufgrund der besseren Zugänglichkeit für die Reaktivitätsstudien eingesetzt wurde. Grundlegende Studien zum Redoxverhalten des Diborakumulens zeigten die vollständige, oxidative Spaltung der Bor–Bor-Bindung mit Chlorgas unter Ausbildung eines CAAC-stabilisierten Bortrichlorid-Fragments. Die Arbeiten zum Bis(boraketen) 17 und die Darstellung des Bis(boraketenimins) 18 durch die Umsetzung des Diborakumulens mit Kohlenstoffmonoxid bzw. geeigneten Isocyaniden, stellte einen ersten größeren Teilbereich dieser Arbeit dar. Durch die enorme π-Rückbindung in die CAAC-Liganden und die CO-Liganden aus der elektronenreichen B2-Einheit kommt es in 17 zu einer Aufweitung der B–B-Bindung und orthogonal zueinander stehenden Molekülhälften. Im weiteren Verlauf konnte ein Mechanismus für die Addition von CO an B2(CAAC)2 gefunden werden, in dem aufgrund hoher energetischer Barrieren eine Umsetzung zum Bis(boralacton) – einer Spezies, die für die Reaktion von Kohlenstoffmonoxid mit NHC-stabilisierten Diborinen gefunden wurde – unterbunden wird. Die elektronischen und strukturellen Unterschiede zwischen Diborinen und dem Diborakumulen 7 konnten so erstmals anhand definierter Reaktionsbedingungen evaluiert werden. Die Reaktion von 7 mit zwei Äquivalenten tert-Butylisocyanid führte zur Bildung eines Bis(boraketenimins). Ähnlich wie im Bis(boraketen) 17 kommt es auch hier unter anderem zu einer starken π-Rückbindung in den Isocyanidliganden einhergehend mit der Aufweitung der B–B-Bindung und orthogonal zueinander stehenden Molekülhälften. Die Thermolyse der Verbindung führte zu einer Abspaltung zweier tert-Butylradikale und zur Bildung des ersten, strukturell charakterisierten Dicyanodiborens 20. Das Dicyanodiboren zeigte hier eine strukturelle Besonderheit: Während ein CAAC-Ligand in Konjugation mit dem π-System der B2-Einheit steht, zeigt der zweite CAAC-Ligand eine orthogonale Orientierung zu diesem, was vermutlich zu einer Polarisierung der B=B-Doppelbindung führt und potentiell hochinteressante Reaktivitäten ermöglicht. So führte die Umsetzung von 20 mit Kohlenstoffmonoxid zur Spaltung der B–B-Bindung und Insertion eines µ2-gebundenen CO-Moleküls in die BB-Einheit. Die Tatsache, dass ein ähnliches Reaktionsverhalten bisher nur vom ebenfalls CAAC-stabilisierten Dihydrodiboren 22 bekannt war (vide infra), demonstrierte an diesem Beispiel eindeutig die bemerkenswerten Fähigkeiten von CAACs reaktive, niedervalente Hauptgruppenelementverbindungen zu stabilisieren. Die Reaktivität des Diborakumulens 7 gegenüber Diwasserstoff stellte einen weiteren, großen Teilaspekt dieser Arbeit dar. Das Rühren von 7 unter einer H2-Atmosphäre führte zur 1,2-Addition des H2-Moleküls an die B2-Einheit unter Ausbildung eines trans-ständigen, Basen-stabilisierten Dihydrodiborens 22. Im Gegensatz zum Dicyanodiboren (20) handelt es sich bei 22 um eine C2-symmetrische Verbindung, dessen π-System im HOMO aufgrund der π-Acidität der CAAC-Liganden über das gesamte C–B–B–C-Grundgerüst delokalisiert ist. Die Hydrierung wurde ebenfalls mit hochreinem D2 durchgeführt, um eine Hydridabstraktion aus dem Lösungsmittel auszuschließen. DFT-Berechnungen konnten zudem die Bor-gebundenen Wasserstoffatome als Hydride klassifizieren und den Mechanismus der Addition von Diwasserstoff an die B2-Einheit ermitteln. Mit einem berechneten, exothermen Reaktionsverlauf stellt die Umsetzung von 7 zu 22 auf diesem Weg das erste Beispiel einer nicht katalysierten Hydrierung einer homodinuklearen Mehrfachbindung der 2. Periode dar. Das CAAC-stabilisierte Dihydrodiboren 22 zeigte im Verlauf dieser Arbeit vielfältige Bindungsmodi aus der Umsetzung mit Kohlenstoffmonoxid. Unter anderem die Eigenschaft von CAACs, eine 1,2-Wasserstoffwanderung von angrenzenden BH-Einheiten auf das Carbenkohlenstoffatom zu begünstigen, führte zur Ausbildung verschiedener Tautomere. Während das Produkt aus der formalen Addition und Insertion von zwei CO-Molekülen (24) lediglich unter CO-Atmosphäre stabil war, konnte unter Argonatmosphäre ein Tautomerengemisch von 25 mit intakter Bor–Bor-Bindung und einer Boraketeneinheit isoliert werden. Während dieser Prozess vollständig reversibel war, führte das Erhitzen von 25 zur Bildung eines Alkylidenborans (26), welches ebenfalls in zwei tautomeren Formen vorlag. Darüber hinaus konnte die Bildung einer weiteren Spezies (27) in geringen Ausbeuten beobachtet werden, die aus der vollständigen Spaltung eines CO-Fragments und der Bildung einer intramolekularen C≡C-Dreifachbindung resultierte. VT-NMR- und Korrelationsexperimente, Kristallisationen unter verschiedenen Atmosphären, Schwingungsspektroskopie sowie die mechanistische Analyse der Umsetzungen basierend auf DFT-Berechnungen ermöglichten hier einen tiefen und detaillierten Einblick in die zugrunde liegenden Prozesse. Die thermische Umsetzung des Dihydrodiborens 22 mit Acetylen führte wider Erwarten nicht zur Cycloaddition an die B=B-Doppelbindung, sondern zur Insertion in diese. Das erhaltene Produkt 28 zeigte eine C2-symmetrische Struktur und durchgängig sp2-hybridisierte Kohlenstoff- und Borzentren entlang der Hauptachse. Eine DFT-Studie ergab ein konjugiertes π-System, dass dem 1,3,5-Hexatrien stark ähnelte. Eine weitere Umsetzung von 22 mit zwei Äquivalenten Diphenyldisulfid führte ebenfalls zur Spaltung der B=B-Doppelbindung und zur Ausbildung eines CAAC-stabilisierten, sp3-hybridisierten Monoborans. Das Diborakumulen 7 konnte in zwei weiteren Reaktivitätsstudien selektiv mit Kohlenstoffdioxid und Aceton umgesetzt werden. Die Reaktion von B2(CAAC)2 mit zwei CO2-Molekülen führte zur Ausbildung einer Spezies mit einer Boraketenfunktionalität und einem Borsäureesterderivat (30). Für die Aktivierung von Kohlenstoffdioxid an unpolaren Mehrfachbindungen gab es bisher kein Beispiel in der Literatur, sodass diese mechanistisch untersucht wurde. Hier erfolgte die Reaktion über eine ungewöhnliche, sukzessive [2+1]-Cycloaddition an die koordinativ ungesättigten Boratome mit einem insgesamt stark exergonen Verlauf. Die Umsetzung von 7 mit Aceton führte zur Ausbildung eines fünfgliedrigen Heterocyclus mit einer C=C-Doppelbindung und asymmetrisch verbrückter Bor–Bor-Bindung mit einem orthogonal zum Heterocyclus stehenden μ2-Hydrid. Interessanterweise zeigte hier eine vergleichende Studie von Tobias Brückner an einem SIDep-stabilisierten Diborin bei einer analogen Reaktionsführung ein 1,2-Enol-Additionsprodukt, sodass der zugrunde liegende Reaktionsmechanismus ebenfalls untersucht wurde. Während das 1,2-Enol-Additionsprodukt als Intermediat zur Bildung von 31 beschrieben werden konnte, führten moderate Energiebarrieren und ein deutlich exergoner Reaktionsverlauf im Fall des Diborakumulens zu einer doppelten Acetonaktivierung. Für 31 konnte darüber hinaus ein Isomerengemisch beobachtet werden, das nach der Bildung nicht mehr ineinander überführt werden konnte. Die Reaktion des Diborakumulens mit Münzmetallhalogeniden ergab für die Umsetzung von 7 mit drei Äquivalenten Kupfer-(I)-chlorid-Dimethylsulfidaddukt eine T-förmige Koordination von drei CuCl-Fragmenten an die B2-Einheit (33). Setzte man das Diborakumulen 7 mit einem Äquivalent IMeMe um, bildete sich das heteroleptisch substituierte Mono-Basenaddukt 34. Dieses zeigte eine thermische Labilität, sodass sich nach einem Zeitraum von 24 Stunden bei erhöhter Temperatur selektiv das Produkt einer CH-Aktivierung isolieren ließ. Das gleiche Produkt (35) konnte ebenfalls durch die Zugabe einer Lewis-Säure (Galliumtrichlorid) zu 34 nach kurzer Zeit bei Raumtemperatur erhalten werden. Setzte man 34 mit einem weiteren Äquivalent IMeMe um, so bildete sich das Bis(IMeMe)-Addukt des Diborakumulens 36, das zunächst an das Bis(CO)-Addukt 17 erinnerte und durch die hohe sterische Spannung im System eine stark aufgeweitete Bor–Bor-Bindung besitzt. Die Reaktion von 34 gegenüber Kohlenstoffmonoxid lieferte das heteroleptisch substituierte Basenaddukt 37. Das elektronenreiche Boratom des Boraketenstrukturfragments führt hier zu einer erheblichen π-Rückbindung in den CO-Liganden, der die niedrigsten, zu diesem Zeitpunkt jemals beobachteten Wellenzahlen für die CO-Schwingung in einer derartigen Funktionalität aufweist. Eine abschließende Umsetzung des Mono-Basenaddukts 34 mit Diwasserstoff führte zur spontanen Hydrierung beider Boratome und zur Spaltung der Bor–Bor-Bindung. Die Reaktionsmischung zeigte nach erfolgter Reaktion ein 1:1-Verhältnis aus einem CAAC-stabilisierten BH3-Fragment 39 und einem zweifach Basen-stabilisierten BH-Borylen 38. Die Spaltung einer Bor–Bor-(Mehrfach)-Bindung zur Synthese von heteroleptisch Lewis-Basen-stabilisierten Borylenen stellte dabei einen bisher nicht bekannten Zugang zu dieser Verbindungsklasse dar. Ein sehr großer Teilbereich dieser Arbeit beschäftigte sich mit der Synthese und Reaktivität von Diborabenzol-Derivaten. Setzte man das Diborakumulen 7 mit Acetylen um, so konnte die Bildung eines CAAC-stabilisierten 1,4-Diborabenzols beobachtet werden. Das planare Grundgerüst, C–C- und B–C-Bindungen im Bereich von (partiellen) Doppelbindungen, stark entschirmte Protonen des zentralen B2C4H4-Heterocyclus, Grenzorbitale, die denen des Benzols ähneln, sowie negative NICS-Werte stellen 42 als einen 6π-Aromaten dar, der mit seinem energetisch stark destabilisierten HOMO als elektronenreicher Ligand in der Übergangsmetallchemie eingesetzt werden konnte (vide infra). Die Reaktion von B2(CAAC)2 mit Propin bzw. 2-Butin lieferte hingegen 2π-aromatische, paramagnetische Verbindungen mit Schmetterlingsgeometrie aus der [2+2]-Cycloaddition an die Bor–Bor-Bindung und anschließender Umlagerung zu den thermodynamisch stabileren 1,3-Diboreten. Die weitere, thermisch induzierte Umsetzung von 40 und 41 mit Acetylen ermöglichte die Darstellung der Methyl-substituierten 1,4-Diborabenzol-Derivate 43 und 44. Um die Eigenschaften des CAAC-stabilisierten 1,4-Diborabenzols zu analysieren, wurde sowohl die Redoxchemie von 42 als auch dessen potentieller Einsatz als η6-Ligand an Übergangsmetalle der Chromtriade untersucht. Es zeigte sich, dass durch die Reduktion mit Lithium die Darstellung des zweifach reduzierten Diborabenzols 45 möglich war. Die Ausbildung eines quinoiden Systems führte hier zu einem Isomerengemisch aus cis/trans-konfigurierten CAAC-Liganden. Die Umsetzung der isolierten Verbindung mit 0.5 Äquivalenten Zirkoniumtetrachlorid führte quantitativ zur Bildung von 42 und demonstrierte somit das hohe Reduktionspotential der dilithiierten Spezies. Durch die Reaktion von 42 mit [(MeCN)3M(CO)3] (M = Cr, Mo, W) gelang darüber hinaus die Darstellung von 18-Valenzelektronen-Halbsandwichkomplexen. Die Koordination des elektronenreichen Heteroarens an die Metalltricarbonyl-Segmente lieferte die niedrigsten, zu diesem Zeitpunkt je beobachteten Carbonylschwingungen für [(η6-aren)M(CO)3]-Komplexe, die durch den starken, elektronendonierenden Einfluss des Liganden auf das Metall und die daraus resultierende erhebliche Rückbindung in die antibindenden π*-Orbitale der CO-Liganden hervorgerufen werden. DFT-Analysen der Verbindungen zeigten zudem im Vergleich zu [(η6-C6H6)Cr(CO)3] signifikant höhere Bindungsenergien zwischen dem Metallfragment und dem 1,4-Diborabenzol und unterstreichten zusammen mit weiteren spektroskopischen und theoretischen Analysen die bemerkenswerten Eigenschaften von 42 als überaus stark elektronendonierender Ligand. Letztlich gelang in einer Reaktivitätsstudie am Wolframkomplex 48 die Darstellung eines Mono-Radikalanions (49), das vermutlich das erste Beispiel eines monoanionischen Aren-Metalltricarbonyl-Komplexes der Gruppe 6 darstellt. Ein abschließendes, großes Thema dieser Arbeit beschäftigte sich mit der Synthese von Biradikalen aus verdrehten Doppelbindungen und dem Vergleich mit den verwandten, diamagnetischen Diborenen. Die Reaktion des Diborakumulens mit verschieden substituierten Disulfiden und einem Diselenid führte zur Ausbildung von persistenten, paramagnetischen, biradikalischen Spezies durch die 1,2-Addition an die Bor–Bor-Mehrfachbindung. Während die Addition der Substrate an das IDip-stabilisierte Diborin 5 geschlossenschalige, diamagnetische Diborene mit coplanarer Anordnung der Substituenten lieferte, konnte nach der Addition der Substrate an das Diborakumulen 7 stets eine Bor–Bor-Einfachbindung mit orthogonaler Ligandenorientierung festgestellt werden. ESR-spektroskopische und magnetische Messungen der Proben ergaben für 51e einen Triplett-Grundzustand bei Raumtemperatur und durch den captodativen-Effekt der π-Donor Stickstoffatome und der π-Akzeptor Boratome eine erhebliche Delokalisierung der ungepaarten Elektronen in die Liganden. Detaillierte theoretische Studien konnten darüber hinaus zeigen, dass die Singulett-Zustände der synthetisierten Diborene stabiler als die Triplett-Zustände sind und dass die Triplett-Zustände der paramagnetischen Verbindungen 51a,b,e stabiler als die entsprechenden Singulett-Zustände sind. Die Verbindungen liegen stets in ihrem Grundzustand vor und lieferten somit hochinteressante Modellsysteme zum tieferen Verständnis dieser Verbindungsklasse. N2 - Within the scope of this work, various reactivities of the diboracumulene 7 and derivatives thereof were investigated. Induced by the exceptional electronic properties of the applied CAAC ligands, unprecedented and exceptional binding modes of low-valent boron species have been observed. The influence of the strong σ-donor properties and the pronounced π-acidity of the cyclic (alkyl)(amino)carbenes is reflected in comparative reactivity studies with the respective NHC-stabilized boron–boron multiple bonded systems. Initially the synthesis of further diboracumulenes was attempted and realized with a bis(CAACCy)-stabilized B2 unit (12). With comparable 11B NMR shifts and similar bond lengths, the compound does not significantly differ in terms of its electronic properties from B2(CAAC)2 (7), which was used in the reactivity studies due to its superior accessibility. Fundamental studies on the redox properties of B2(CAAC)2 showed the complete oxidative cleavage of the boron–boron bond with chlorine gas while forming a CAAC-stabilized boron trichloride fragment. Research on the bis(boraketene) 17 and the synthesis of the bis(boraketeneimine) 18 through the treatment of the diboracumulene 7 with carbon monoxide and suitable isocyanides represents the first major section of this work. Due to the strong π-backbonding into the CAAC ligands and the CO ligands from the electron rich B2 unit, the B–B bond of 17 is significantly elongated and the π-frameworks are mutually orthogonal. By means of DFT calculations the reaction pathway could be investigated, which shows high energetic barriers for the conversion of 17 to the bis(boralactone), a species that was observed for the NHC-stabilized boron–boron multiple bonds. In this way the electronic and structural differences between diborynes and the diboracumulene 7 could be evaluated under defined reaction conditions for the first time. The reaction of 7 with two equivalents of tert-butyl isocyanide led to the formation of a bis(boraketeneimine). Comparable to the bis(boraketene), 18 shows strong π-backbonding into the isocyanide ligands, which is concomitant with an elongated B–B bond and orthogonally oriented boraketeneimine moieties. Thermolysis of the compound led to the elimination of two tert-butyl radicals and formation of the first structurally characterized dicyanodiborene (20). The dicyanodiborene shows a structural peculiarity: While one CAAC ligand is in conjugation with the π-system of the B2 unit, the second one shows an orthogonal orientation to the π-framework, which presumably results in polarization of the B=B double bond and potentially enables highly interesting reactivity. Thus, the addition of carbon monoxide to 20 led to the splitting of the B–B bond and the insertion of a µ2-bound CO molecule into the B2 unit. The fact that similar reactivity is only known from the CAAC-stabilized dihydrodiborene 22 (vide infra) clearly demonstrates the exceptional properties of CAACs to stabilize highly reactive, low-valent main group compounds. The reactivity of the diboracumulene 7 towards dihydrogen represents another major section of this work. When 7 was stirred under a H2 atmosphere the H2 molecule was added across the B2 unit in a 1,2-addition, leading to the formation of a base-stabilized trans dihydrodiborene. In contrast to the dicyanodiborene, 22 is C2 symmetric and the π-system in the HOMO is delocalized over the whole C–B–B–C framework due to the π-acidity of the CAAC ligands. The hydrogenation was also carried out with pure D2 to rule out hydrogen abstraction from the solvent. DFT calculations also classified the boron-bound hydrogens as hydrides and determined the mechanism of the dihydrogen addition to the B2 unit. With a calculated exothermic reaction pathway, the reaction from 7 to 22 represents the first example of an uncatalyzed hydrogenation of a homodinuclear multiple bond of the second row. In this work the CAAC-stabilized dihydrodiborene 22 showed diverse binding modes when treated with carbon monoxide. Among other outcomes, the propensity to promote 1,2-hydrogen shifts from adjacent BH-moieties to the carbene carbon atom led to the formation of various tautomers. While the product of the formal addition and insertion of two CO molecules was only stable under a CO atmosphere (24), under argon atmosphere two tautomers of 25 with a boron–boron bond and boraketene unit could be isolated. This process was found to be completely reversible. However, heating of 25 led to the formation of an alkylidene borane 26 which also exists in two tautomers. Furthermore, the formation of another species in low yields from the complete splitting of a CO fragment and the formation of an intramolecular C≡C triple bond could be observed. VT-NMR and correlation experiments, crystallizations under different atmospheres, vibrational spectroscopy, as well as determination of the reaction pathway by means of DFT calculations, enabled a deep and detailed insight into the underlying processes. The reaction of the dihydrodiborene 22 with acetylene under thermal conditions did not lead to the expected cycloaddition across the B=B double bond but to the insertion of acetylene into it. The obtained product 28 showed a C2 symmetric structure with sp2-hybridized carbon and boron centers along the major axis. A DFT study showed a conjugated π-system which closely resembles the of 1,3,5-hexatriene. Another reaction of 22 with two equivalents of diphenyl disulfide yielded the splitting of the B=B double bond and the formation of a CAAC-stabilized sp3-hybridized monoborane. In two other reactivity studies the diboracumulene could be selectively reacted with carbon dioxide and acetone. The reaction of B2(CAAC)2 with two CO2 molecules led to the formation of a species with a boraketene functionality and a boronic ester group (30). There are no reported examples of the activation of carbon dioxide with apolar multiple bonds, which is why the reaction pathway was investigated by DFT calculations. The reaction proceeds via an unusual successive [2+1] cycloaddition to the coordinatively unsaturated boron atoms with the whole process being strongly exergonic. The reaction of 7 with acetone led to the formation of a five-membered heterocycle with a C=C double bond and an unsymmetrically bridged boron–boron bond with a µ2 hydride orthogonal to the heterocycle. Interestingly, a comparative study from Tobias Brückner with a SIDep-stabilized diboryne and analogous reactions conditions resulted in the 1,2-enol addition product so that the underlying reaction pathway was also investigated. While the 1,2-enol addition product can be described as an intermediate on the way towards 31, moderate energetic barriers and a noticeably exergonic reaction pathway led to a double acetone activation when using the diboracumulene. 31 also showed a mixture of two isomers that could not be interconverted after formation. The reaction of B2(CAAC)2 with (Me2S)CuCl led to a T-shaped coordination of three CuCl fragments to the B2 unit. If treated with one equivalent IMeMe, the diboracumulene showed the formation of the heteroleptic substituted mono base adduct 34. Due to its thermal lability, after 24 hours at elevated temperature the selective formation of a C–H activation product was observed. The same product (35) could be obtained within minutes after addition of a Lewis acid (gallium trichloride) to 34 at room temperature. The addition of another equivalent of IMeMe to 34 led to the formation of the bis(IMeMe) adduct of the diboracumulene 36, which was reminiscent of the bis(CO) adduct 17 and features a strongly elongated B–B bond due to the steric strain in the system. The reaction of 34 towards carbon monoxide resulted in the formation of the heteroleptic base adduct 37. The electron rich boron atom of the boraketene fragment induces strong π-backdonation into the CO ligand, resulting in the lowest observed CO stretch for such a functionality. A final reactivity test of the monobase adduct 34 was carried out with dihydrogen, which led to the spontaneous hydrogenation of both boron atoms and the splitting of the boron–boron bond. The reaction mixture showed two species in a 1:1 ratio: a CAAC-stabilized BH3 fragment 39 and a twofold base-stabilized BH-borylene 38. The splitting of a boron–boron (multiple) bond to access heteroleptic Lewis-base-stabilized borylenes provides a novel approach towards this class of compounds. A large part of this work concerns with the synthesis and reactivity of diborabenzene derivatives. When treating the diboracumulene 7 with acetylene, the formation of a CAAC-stabilized 1,4-diborabenzene could be observed. The planar framework, C–C and B–C bonds within the area of (partial) double bonds, strongly deshielded protons of the central B2C4H4 heterocycle, frontier orbitals that resemble those of benzene as well as negative NICS values represent 42 as a 6π-aromatic system. Due to its tremendously energetically destabilized HOMO, the compound was capable to be used as an electron rich ligand in transition metal chemistry (vide infra). The reactions of B2(CAAC)2 with propyne and 2-butyne led to the formation of 2π-aromatic, paramagnetic compounds with a butterfly shape from the [2+2] cycloaddition to the boron–boron-bond followed by a rearrangement to the thermodynamically more stable 1,3-diboretes. The thermally induced reaction of 40 and 41 with acetylene enabled the formation of the methyl-substituted 1,4-diborabenzene derivatives 43 and 44. To evaluate the properties of the CAAC-stabilized 1,4-diborabenzene 42, the redox properties as well as the potential application as a η6-ligand for transition metals of the chromium triad, were investigated. The reduction of 42 with elemental lithium led to the formation of the two-electron reduction product 45. The formation of a quinoidal system led to an isomeric mixture of cis/trans configured CAAC ligands. Treatment of the compound with 0.5 equivalents of zirconium tetrachloride led to the quantitative formation of 42 and thereby demonstrating the high reduction potential of the dilithiated species. Furthermore, the reaction of 42 with [(MeCN)3M(CO)3] (M = Cr, Mo, W) enabled the synthesis of 18-valence-electron half-sandwich complexes. The coordination of the electron rich heteroarene to the metal tricarbonyl fragments resulted in the lowest ever observed carbonyl stretches for [(η6-arene)M(CO)3] complexes due to the strong electron donation of the ligand to the metal and the resulting backdonation into the antibonding π*-orbitals of the CO ligands. DFT calculations revealed (in contrast to [(η6-C6H6)Cr(CO)3]) significantly higher binding energies between the metal fragment and the 1,4-diborabenzene and together with further spectroscopic and theoretical analyses underline the remarkable ability of 42 to act as an exceedingly electron donating ligand. Ultimately in a reactivity study with the tungsten complex 48, it was possible to obtain the radical monoanion 49, which is the first example of a monoanionic arene metal tricarbonyl complex of group 6 metals. A final topic of this work concerned the synthesis of biradicals from twisted double bonds and the comparison with their diamagnetic congeners, diborenes. The reaction of the diboracumulene with differently substituted disulfides and one diselenide led to the formation of persistent, paramagnetic biradicals through 1,2 additions across the boron–boron multiple bond. While the addition of the reagents to the IDip-stabilized diboryne provided closed-shell, diamagnetic diborenes with a coplanar orientation of the substituents, the addition to the diboracumulene 7 led to the formation of a boron–boron single bond with mutually orthogonal ligands. EPR spectroscopy as well as magnetic measurements of the samples showed a triplet ground state for 51e at room temperature with a strong delocalization of the unpaired electrons into the ligands due to the captodative effect of the π-donor nitrogen atoms and π-acceptor boron atoms. Furthermore, detailed theoretical studies showed that the singlet states of the synthesized diborenes are always more stable than the triplet states and that the triplet states of the paramagnetic compounds 51a,b,e are always more stable than the respective singlet states. All compounds exist in their ground states and therefore represent highly interesting model systems for a deeper understanding of this class of compounds. KW - Bor KW - Mehrfachbindung KW - Reaktivität KW - CAAC KW - Diborakumulen KW - Diborin KW - Diboren KW - Carben Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163335 ER - TY - THES A1 - Schuster, Julia Katharina T1 - Lewis-Basen-Stabilisierte Mono- und Dinukleare Verbindungen des Galliums und Niedervalente Verbindungen des Berylliums - Darstellung und Reaktivitätsstudien T1 - Lewis-Base-Stabilized Mono- and Dinuclear Gallium Compounds and Low-Valent Beryllium Compounds - Synthesis Reactivity Studies N2 - The present work is divided into two parts, the first of which is concerned with the synthesis and reactivity of carbene-stabilized gallium compounds. The second part of this thesis adresses the synthesis of novel, beryllium-containing compounds, whereby, in addition to investigations into new structural motifs of linear, sp-hybridized beryllium compounds, the stabilization of low valent beryllium complexes by the use of carbene ligands is a central part of this thesis. 1 Lewis-base-stabilized gallium compounds In this chapter, two different synthetic routes towards carbene stabilized, low-valent gallium compounds were investigated. By the use of CAAC ligands, four different [GaCl3(RCAAC)]-species (R = Me, Cy, Et, Menth) were realized, and investigated in terms of their reactivity towards reducing agents. However, all experimental approaches led to either decomposition products or renewed isolation of the starting materials and the synthesis of dinuclear gallium compounds via reductive coupling of two CAAC-Ga fragments was found not to be feasible. A different approach towards low-valent gallium compounds was the chemical reduction of Lewis-base-stabilized digallanes(4), in which the two gallium atoms are already connected via a σ bond. The synthesis of such compounds by reaction of either the subhalide ´GaI` or the mixed-valent salt [Ga]+[GaCl4]– with two equivalents of the free MeCAAC did not afford the double Lewis-base-stabilized [Ga2X4(MeCAAC)2] species (X = I, Cl). However, [Ga2Cl4(MeCAAC)2] was accessible through ligand exchange reaction of [Ga2Cl4(1,4-dioxane)2] with two equivalents of MeCAAC, due to the relatively weakly-coordinating nature of 1,4-dioxane. In an analogous fashion, three additional Lewis-base-stabilized digallanes(4) could be realized when the carbenes CyCAAC, SIDep und IDipp were used. The reactivity of the Lewis-base-stabilized digalliumtetrachlorides was tested towards different reducing agents. However, none of the reactions led to a distinct product formation and the synthesis of neutral, Ga-Ga multiple bond systems could not be realized in this manner. However, treatment of [Ga2Cl4(MeCAAC)2] with two equivalents of 1,3,2 diazaborolyllithium induced Ga-Ga bond cleavage and [GaCl2{B(NDippCH)2}(MeCAAC)] was isolated as the only boron-containing compound. The halide exchange reactions of the double Lewis-base adducts of digalliumtetrachloride were also investigated. Treatment of [Ga2Cl4(MeCAAC)2] and [Ga2Cl4(CyCAAC)2] with 1.3 molar equivalents of either BBr3 or BI3, well established reagents for halide exchange at other Group 13 elements, yielded the corresponding [Ga2X4(MeCAAC)2] (X = Br, I ) and [Ga2X4(CyCAAC)2] (X = Br, I), with retention of the carbene ligands. Also, the reaction of [Ga2Br4(CyCAAC)2] with BI3 afforded the fully iodinated species. In contrast to the MeCAAC-stabilized compounds, which feature extreme insolubility in common organic solvents, the CyCAAC-stabilized compounds could be characterized by NMR spectroscopy and X-ray diffraction. 2 Lewis-base-stabilized beryllium compounds The reaction of BeCl2 with two equivalents 1,3,2-diazaborolyllithium provided the homoleptic, linear Be{B(NDippCH)2}2. In its 9Be NMR spectrum, the compound shows a chemical shift of δ = 45 ppm, significantly outside the normal range of two-coordinate beryllium compounds. The electrophilic nature of the beryllium center in Be{B(NDippCH)2}2 was calculated by quantum chemical calculations and demonstrated by its reactivity towards different substrates: methanolysis of Be{B(NDippCH)2}2 induced a Be-B bond cleavage, and, along with insoluble materials presumed to be the polymeric beryllium methanolate, cleanly afforded the protonated 1,3,2 diazaborole. The use of deuterated MeOD in the reaction confirmed methanol as the proton source. Treatment of Be{B(NDippCH)2}2 with one equivalent of the small carbene IMe effected addition at the beryllium center to yield the trigonal mixed Lewis-base adduct. The heteroleptic BeCl{B(NDippCH)2} could not be synthesized by the reaction of BeCl2 with equimolar amounts of 1,3,2-diazaborolyllithium. Therefore, [BeClCp*] was used as starting material for the synthesis of novel, heteroleptic sp-hybridized beryllium species. Treatment of [BeClCp*] with various NHCs did not lead to the expected adduct formation, but yielded, only in the case of IiPr, the metallocene [BeCp*2] and the double Lewis-base adduct [BeCl2(IiPr)2] in a ligand exchange reaction. The reaction of [BeClCp*] with equimolar amounts of 1,3,2 diazaborolyllithium formed the linear coordinated [BeCp*{B(NDippCH)2}] in a salt elimination reaction. A central part of this work was the monomerization of BeCl2 by the use of CAAC ligands. Four differerent [BeCl2(RCAAC)] species (R = Me, Cy, Et, Menth) were synthesized via reaction of the corresponding free carbenes and BeCl2. Furthermore, the reactivity of these kinds of compounds towards different substrates was investigated. Treatment of [BeCl2(MeCAAC)] with equimolar amounts of 1,3,2-diazaborolyllithium afforded the trigonal mixed Lewis-base adduct [BeCl{B(NDippCH)2}(MeCAAC)] in a salt elimination reaction. This compound showed limited stability under reduced pressure, in solution as well as in the solid state, and subsequently formed the protonated 1,3,2 diazaborole and a beryllium containing compound that could not be further identified. The reaction of [BeCl2(MeCAAC)] with Bogdanović-Magnesium ([Mg(C14H10)(thf)3]) provided the CAAC-stabilized berylliumanthracendiyl [Be(C14H10)(MeCAAC)], which was isolated as a red solid. The mechanism of this reaction might be described as a nucleophilic addition of the dianionic anthracene unit to the beryllium center with concomitant loss of MgCl2. [Be(C14H10)(MeCAAC)] shows structural similarities to the magnesium containing species [Mg(C14H10)(thf)3], as both compounds show a non-planar anthracene moiety in their solid-state structures, due to the loss of aromaticity of the substituent. None of the attempts to chemically reduce the various [BeCl2(RCAAC)] compounds with a range of one-electron reducing agents afforded a selective reaction product, and either decomposition products or starting materials were isolated. However, treatment of the Lewis-base adducts [BeCl2(MeCAAC)] and [BeCl2(CyCAAC)] with potassium graphite in the presence of an additional equivalent of RCAAC (R = Me, Cy) yielded the homoleptic and heteroleptic compounds [Be(CyCAAC)2], [Be(MeCAAC)2] and [Be(MeCAAC)(CyCAAC)]. The solid-state structures of the double Lewis-base stabilized beryllium compounds show linear geometries around the beryllium center and significant differences to their beryllium-containing starting materials. A contraction of the Be1-C1 bonds as well as an elongation of the ligand-centered C1-N1 bonds was observed, indicative of strong Be-C bonding. Whereas the beryllium atom is usually found in its +II oxidation state, the central atom in the linear [Be(CAAC)] compounds is formally in its elemental form. Therefore, these compounds represent the first neutral complexes with a formally zerovalent CAAC-stabilized s-block element. The unusual electronic structure of these compounds is emphasized by their deep violet color (λmax (THF) = 575/579 nm). Quantum chemical calculations describe the bonding situation in [Be(CAAC)2] with a combination of donor-acceptor interactions between two ground-state singlet CAAC ligands and Be(0) in a 1s22s02p2 electronic configuration, resulting in a 3c 2e− π bond stretching over the C Be C core. Furthermore, the stabilization arising from π backdonation from Be to the CAAC ligands was found to significantly predominate over that from σ-donation from CAAC to the beryllium center. The NHC-stabilized compounds [Be(IDipp)2] and [Be(IDipp)(IMes)] and the mixed NHC/CAAC-stabilized species [Be(MeCAAC)(NHC)] (NHC = IDipp, IMes, SIDep) could not be synthesized. This might be explained by the different electronic properties of the carbenes. On the one hand, the π-accepting abilities of the NHCs are likely insufficient to form a 3c 2e− π bond. On the other hand, the stability of the mixed CAAC/NHC stabilized Be(0) compounds might not be sufficient due to differences in the σ-donating and π accepting properties of the ligands, which limits the formation of a symmetrical 3c 2e− π bond across the C-Be-C unit. N2 - Die vorliegende Arbeit ist in zwei Abschnitte gegliedert und befasst sich im ersten Teil mit der Darstellung und Reaktivität neuartiger, Carben-stabilisierter Galliumverbindungen. Der zweite Teil wurde den Untersuchungen zur Darstellung von berylliumhaltigen Verbindungen gewidmet, wobei, neben der Synthese von neuartigen, monomeren, sp-hybridisierten Berylliumverbindungen, die Stabilisierung niedervalenter Berylliumverbindungen durch die Verwendung von Carbenen einen zentralen Teil der Arbeit darstellt. 1 Lewis-Basen-stabilisierte Galliumverbindungen Zur Darstellung von Carben-stabilisierten, niedervalenten Galliumverbindungen wurden zwei unterschiedliche Syntheserouten herangezogen. Dabei konnten zum einen vier [GaCl3(RCAAC)]-Spezies (R = Me, Cy, Et, Menth) dargestellt werden, deren Verhalten unter reduktiven Bedingungen untersucht wurde. Jedoch führte keiner der Versuche zur chemischen Reduktion dieser Systeme zu einheitlichen Produkten und die Darstellung von dinuklearen Galliumverbindungen durch eine reduktive Kupplung zweier CAAC-Ga-Fragmente war auf diesem Weg nicht realisierbar. Ein weiterer Ansatz zur Darstellung von niedervalenten Digalliumverbindungen war die Reduktion Lewis-Basen-stabilisierter Digallan(4)-Verbindungen, bei welchen die beiden Galliumatome bereits über eine σ Einfachbindung verknüpft vorliegen. Die Synthese solcher Verbindungen durch die direkte Umsetzung des Galliumsubhalogenids ´GaI` bzw. des gemischt-valenten Salzes [Ga]+[GaCl4]– mit zwei Äquivalenten des freien Carbens MeCAAC führte nicht zu den doppelt Carben stabilisierten [Ga2X4(MeCAAC)2]-Spezies (X = I, Cl). Jedoch konnte [Ga2Cl4(MeCAAC)2] ausgehend von [Ga2Cl4(1,4 Dioxan)2], auf Basis der relativ schwach koordinierenden 1,4-Dioxan-Liganden, mittels Ligandaustauschreaktion dargestellt werden. In analoger Weise waren drei zusätzliche Vertreter realisierbar, wobei die Carbene CyCAAC, SIDep und IDipp verwendet wurden. Die Reaktivität der Lewis-Basen-stabilisierten Digalliumtetrachloride wurde gegenüber unterschiedlicher Reduktionsmittel getestet, wobei bei keiner der Umsetzungen ein einheitliches Produkt isoliert werden konnte. Die Darstellung von neutralen, Ga-Ga-Mehrfachbindungssystemen war folglich auf diese Weise nicht möglich. Die Umsetzung von [Ga2Cl4(MeCAAC)2] mit zwei Äquivalenten 1,3,2-Diazaborolyllithium führte zu einem Ga-Ga-Bindungsbruch und [GaCl2{B(NDippCH)2}(MeCAAC)] konnte als einziges Bor-haltiges Produkt isoliert werden. Ein weiterer zentraler Bestandteil dieser Arbeit beschreibt die Halogenaustauschreaktionen der doppelt Lewis-Basen-stabilisierten Digalliumtetrachloride. Die Verbindungen [Ga2Cl4(MeCAAC)2] und [Ga2Cl4(CyCAAC)2] wurden jeweils mit BBr3 oder BI3 umgesetzt, welche gängigerweise zum Halogenaustausch weiterer Gruppe-13-Verbindungen eingesetzt werden. Alle Reaktionen führten zu einem vollständigen Halogenaustausch der Digalliumtetrachloride unter Retention der Liganden und die Produkte [Ga2X4(MeCAAC)2] (X = Br, I) und [Ga2X4(CyCAAC)2] (X = Br, I) konnten isoliert werden. Auch die Umsetzung von [Ga2Br4(CyCAAC)2] mit BI3 lieferte die iodierte Spezies. Die CyCAAC-stabilisierten Vertreter weisen im Gegensatz zu den MeCAAC-stabilisierten Spezies eine bessere Löslichkeit in gängigen organischen Lösungsmitteln auf und konnten anhand von NMR-spektroskopischen Methoden charakterisiert werden. 2 Lewis-Basen-stabilisierte Berylliumverbindungen Durch die Umsetzung von BeCl2 mit zwei Äquivalenten 1,3,2-Diazaborolyllithium konnte das homoleptisch substituierte, lineare Be{B(NDippCH)2}2 dargestellt werden. Dieses zeigt im 9Be NMR-Spektrum eine Resonanz bei δ = 45 ppm, welche im Vergleich zu anderen linear-koordinierten Berylliumverbindungen weit zu tiefem Feld verschoben ist und bis dato das erste Beispiel dieses Frequenzbereichs darstellt. Der elektrophile Charakter des Berylliumatoms in Be{B(NDippCH)2}2 wurde anhand quantenchemischer Rechnungen postuliert und durch die Reaktivität der Verbindung gegenüber unterschiedlichen Substraten bestätigt. Die Methanolyse von Be{B(NDippCH)2}2 führt zu einem Be-B Bindungsbruch und neben dem, in gängigen Lösungsmitteln unlöslichen, Feststoff (Ben(OMe)m), wurde das protonierte 1,3,2 Diazaborol isoliert. Anhand von Deuterierungsexperimenten konnte Methanol als Protonenquelle identifiziert werden. Die Reaktion mit äquimolaren Mengen IMe lieferte ein trigonal planares Lewis-Basenaddukt. Durch die Umsetzung von BeCl2 mit stöchiometrischen Mengen des 1,3,2 Diazaborolyllithiums konnte die einfach borylierte Verbindung BeCl{B(NDippCH)2} nicht realisiert werden. Um heteroleptisch substituierte, lineare Berylliumverbindungen darzustellen, wurde [BeClCp*] als Edukt eingesetzt. Die Umsetzung mit NHCs führte lediglich im Fall des sterisch weniger anspruchsvollen IiPr zu einer Reaktion, welche nicht unter Adduktbildung verlief, sondern unter Ligandaustausch [BeCp*2] und das zweifach IiPr-stabilisierte Berylliumdichlorid lieferte. Die Umsetzung von [BeClCp*] mit äquimolaren Mengen 1,3,2 Diazaborolyllithium verlief in einer Salzeliminierung und das linear koordinierte [BeCp*{B(NDippCH)2}] wurde isoliert. Ein zentraler Bestandteil dieser Arbeit war die Monomerisierung von BeCl2 durch die Verwendung von CAAC-Liganden. Vier unterschiedlich substituierte Vertreter dieser [BeCl2(RCAAC)]-Spezies (R = Me, Cy, Et, Menth) konnten durch Umsetzung von BeCl2 mit dem entsprechenden freien Carben realisiert werden. Weiterhin erfolgte eine Untersuchung dieser Verbindungen gegenüber unterschiedlicher Substrate. Die Reaktion von [BeCl2(MeCAAC)] mit 1,3,2-Diazaborolyllithium verlief in einer Salzeliminierungsreaktion zu dem verzerrt trigonal planar koordinierten [BeCl{B(NDippCH)2}(MeCAAC)]. Die Verbindung konnte als Feststoff isoliert werden, wies jedoch eine limitierte Stabilität auf und zerfiel, sowohl in Lösung als auch in fester Form, unter Vakuum in das protonierte 1,3,2-Diazaborol und eine berylliumhaltige Verbindung, dessen Struktur nicht aufgeklärt werden konnte. Bei der Umsetzung von [BeCl2(MeCAAC)] mit Bogdanović-Magnesium ([Mg(C14H10)(thf)3]) konnte das CAAC-stabilisierte Berylliumanthracendiyl [Be(C14H10)(MeCAAC)] als roter, kristalliner Feststoff isoliert werden. Der Reaktionsmechanismus dieser Umsetzung ist bislang nicht vollständig geklärt, jedoch wird eine nukleophile Addition des Dianions des Anthracens an das Berylliumzentrum postuliert, welche eine Salzeliminierung zur Folge hat. Die Verbindung weist strukturelle Ähnlichkeiten zu der Magnesium-haltigen Spezies im Festkörper auf und für beide Verbindungen wird, durch den Verlust der Aromatizität des Anthracenylsubstituenten, eine Aufhebung der Planarität des Ringsystems beobachtet. Versuche zur Reduktion der unterschiedlich substituierten [BeCl2(RCAAC)]-Verbindungen mit einer Reihe an Einelektronen-Reduktionsmitteln führten nicht zum Erfolg und es konnte in keinem der Fälle ein einheitliches Produkt isoliert werden. Hingegen lieferte die Reaktion der Lewis-Basenaddukte [BeCl2(MeCAAC)] und [BeCl2(CyCAAC)] mit Kaliumgraphit und einem zusätzlichen Äquivalent RCAAC (R = Me, Cy) die homoleptisch- und heteroleptisch-substituierten Verbindungen [Be(CyCAAC)2], [Be(MeCAAC)2] und [Be(MeCAAC)(CyCAAC)]. Die Festkörperstrukturen der doppelt Lewis-Basen-stabilisierten Berylliumverbindungen zeigen deutliche Unterschiede zu denen der Edukte. Sowohl eine Kontraktion der Be1-C1-Bindungslängen, als auch eine Verlängerung der ligandzentrierten C1-N1-Bindungslängen ist zu beobachten, womit die Be-C-Bindungen der [BeL2] Verbindungen mit einem partiellen Doppelbindungscharakter beschrieben werden können. Im Gegensatz zu anderen, zweifach koordinierten Berylliumverbindungen, welche gewöhnlich in der formalen Oxidationsstufe +II vorliegen, wird in [Be(CAAC)2] das Berylliumatom formal in seiner elementaren Form stabilisiert. Die Verbindungen stellen somit bis dato die ersten neutralen Komplexe dar, bei welchen ein s-Block-Element in der formalen Oxidationsstufe 0 stabilisiert wird. Die ungewöhnliche elekronische Struktur dieser Spezies wird bereits an der tief-violetten Färbung der Verbindungen deutlich (λmax (THF) = 575/579 nm). Quantenmechanische Berechnungen beschreiben die Bindungssituation in [Be(CAAC)2] mit einer Kombination aus Donor-Akzeptor-Wechselwirkungen zwischen zwei CAAC-Liganden im Singulett-Grundzustand und einem neutralen Be(0) im doppelt angeregten Zustand (1s22s02p2). Daraus resultiert eine 3c-2e−-π-Bindung, welche sich über den CCarben Be CCarben-Kern erstreckt und im Vergleich zur σ Hinbindung einen größeren Anteil zur Stabilisierung des Systems beiträgt. Die analogen NHC-stabilisierten Vertreter [Be(IDipp)2] bzw. [Be(IDipp)(IMes)] als auch die heteroleptisch substituierten Spezies [Be(MeCAAC)(NHC)] (NHC = IDipp, IMes, SIDep) konnten nicht realisiert werden. Eine Erklärung hierfür könnten die elektronischen Unterschiede der Carbene liefern. Zum einen reicht vermutlich die Akzeptorfähigkeit der NHCs nicht aus, um eine 3c-2e−-π-Bindung auszubilden und zum anderen ist auch die Stabilität von gemischten CAAC/NHC-stabilisierten Be(0)-Komplexen nicht gegeben, wenn durch die unterschiedliche σ-Donor bzw. π-Akzeptorfähigkeit der Liganden keine symmetrische π-Bindung ausgebildet werden kann. KW - Beryllium KW - Beryllium(0)-Verbindungen KW - Gallium KW - Lewis-Basen Addukte KW - niedervalente Verbindungen KW - Lewis-Basen-stabilisierte Galliumverbindungen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-166381 ER - TY - THES A1 - Lenczyk, Carsten T1 - Koordination und Funktionalisierung von Dihydroboranen an Übergangsmetallkomplexen - Darstellung neuer Carbodiphosphorane und deren Koordination an ausgewählte Substrate T1 - Coordination and functionalization of dihydroboranes with transition metal complexes - Synthesis of new carbodiphosphoranes and their coordination to selected substrates N2 - Teil 1: Koordination und Funktionalisierung von Dihydroboranen an Übergangsmetallkomplexen Im Rahmen der vorliegenden Arbeit wurden Untersuchungen zur Koordination und Funktionalisierung von Dihydroboranen an Übergangsmetallkomplexen durchgeführt. Aufgrund der möglichen Anwendung in Dehydrokupplungsreaktionen wurde die Umwandlung von Dihydroboranen in Borylenkomplexe genauer untersucht. Teil 2: Darstellung neuer Carbodiphosphorane und deren Koordination an ausgewählte Substrate Durch Anwendung einfacher Synthesemethoden konnten in der vorliegenden Arbeit neuartige Carbodiphosphorane dargestellt werden. Diese wurden im weiteren Verlauf der Untersuchungen auf ihre Reaktivität gegenüber ausgewählten Substraten untersucht. N2 - Part 1 Coordination and functionalization of dihydroboranes with transition metal complexes The present work has focused on the coordination and functionalization of dihydroboranes towards various transition metal complexes. In light of possible applications in dehydrocoupling reactions, the conversion of dihydroboranes to borylene complexes was investigated in detail. Part 2 Various carbodiphosphoranes have been synthesized using simple reaction methods. In addition, these carbodiphosphoranes were used to probe the reactivity of this class of compounds towards selected substrates. KW - Borylene KW - Übergangsmetallkomplexe KW - Dehydrokupplung KW - Dihydroborane KW - Borylene Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-180581 ER - TY - THES A1 - Berthel, Johannes H. J. T1 - Synthese und Charakterisierung neuer NHC-stabilisierter Nickelkomplexe für die Gasphasenabscheidung T1 - Synthesis and characterization of new NHC-stabilized nickel complexes for the vapor deposition N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung NHC-stabilisierter Nickelkomplexe, die durch weitere Co-Liganden wie Carbonyle, Olefine, Alkine, Alkyle, Cyanide oder Allylliganden koordiniert sind. Ferner gibt diese Arbeit einen Überblick über die thermischen Eigenschaften dieser Verbindungen, um deren Potenzial für den Einsatz zur Abscheidung elementaren Nickels in CVD- bzw. ALD-Prozessen abschätzen zu können. Dabei konnten vor allem die Substanzklassen der Carbonyl- und Alkylkomplexe als geeignete Präkursoren für die Gasphasenabscheidung elementaren Nickels identifiziert werden, von denen einige ausgewählte Vertreter bereits erfolgreich in CVD-Prozessen getestet wurden. N2 - The present work is about the synthesis and characterization of NHC-stabilized nickel complexes, which are coordinated by further co-ligands like carbonyls, olefins, alkynes, alkyls, cyanides or allylic ligands. This work presents an overview of the thermical properties of these nickel compounds, which gives an insight in their potential for using them to deposit elemental nickel in CVD and ALD processes. It was found the carbonyl and alkyl complexes were identified as useful precursors for vapor depositing elemental nickel. Some of these compounds have already been tested successfully in CVD processes. KW - Nickelkomplexe KW - Heterocyclische Carbene <-N> KW - CVD-Verfahren KW - NHC KW - Nickel KW - Gasphasenabscheidung KW - Carbene Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147571 ER - TY - THES A1 - Prieschl, Dominic T1 - Reaktivitätsstudien zu Diboranen(4) und NHC-stabilisierten µ-Hydridodiboranen(5) T1 - Reactivity studies of diboranes(4) and NHC-stabilised µ-hydrido diboranes(5) N2 - Die vorliegende Arbeit behandelt im ersten Abschnitt die Synthese und Reaktivität neuartiger Diborane(4). Ebenfalls wurde die Reaktivität von Dihalogendiboranen(4) gegenüber Phenylazid untersucht, wobei symmetrische Vertreter unter Beibehalt der B-B-Bindung die fünfgliedrigen B2N3 Heterocyclen 14 und 15 lieferten. Der zweite Abschnitt dieser Arbeit beschäftigt sich mit der unerwarteten Reaktivität der NHC-stabilisierten μ-Hydridodiborane(5) XXIII und XXIV. Der abschließende Teil dieser Arbeit befasst sich mit den ersten Versuchen zur Darstellung eines CAAC-stabilisierten, Diboranyl-substituierten Borylens. N2 - The first part of this thesis focuses on the synthesis and reactivity of novel diboranes(4). Furthermore, the reactivity of dihalodiboranes(4) towards phenyl azide was investigated. Symmetrical derivatives Ia and IIb gave five-membered B2N3 heterocycles 14 and 15 with retention of the B-B bond. The second chapter of this work deals with the unexpected reactivity of NHC-stabilized μ-hydridodiboranes(5) XXIII and XXIV. The final part of this thesis focuses on the first attempts to synthesize a CAAC-stabilised, diboranyl-substituted borylene. KW - Diborane KW - Diborane(4) KW - diboranes(4) KW - Diborane(5) KW - diboranes(5) KW - sp2-sp3 KW - Bor KW - boron Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210749 ER - TY - THES A1 - Hock, Andreas T1 - NHC-stabilized Alanes and Gallanes T1 - NHC-stabilisierte Alane und Gallane N2 - This thesis describes the synthesis and reactivity of NHC-stabilized Lewis-acid/Lewis-base adducts of alanes and gallanes (NHC = Me2ImMe, iPr2Im, iPr2ImMe, Dipp2Im, Dipp2ImH). As this field of research has developed tremendously, especially in the last five years, the first chapter provides an overview of the current state of knowledge. The influence of electronegative π-donor-substituents on the stability of the NHC alane adducts is examined in chapter 2. For this purpose, the carbene stabilized alanes (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) were reacted with secondary amines of different steric demand and with phenols. The π-donor substituents saturate the Lewis acidic aluminium center and coordination of a second NHC-ligand was not observed. The strongly electronegative N and O substituents increase the Lewis acidity of the aluminium atom, which leads to stronger Al-CNHC as well as Al-H bonds, which inhibits the insertion of the carbene into the Al-H bond. In Chapter 3 the development of the synthesis and reactivity of carbene-stabilized gallanes is presented. The synthesis of NHC gallane adducts (NHC)∙GaH3, (NHC)∙GaH2Cl and (NHC)∙GaHCl2 and their reactivity towards NHCs and cAACMe were investigated in detail. The reaction of the mono- and dichlorogallanes (NHC)∙GaH2Cl and (NHC)∙GaHCl2 (NHC = iPr2ImMe, Dipp2Im) with cAACMe led to insertion of the cAACMe with formation of chiral and achiral compounds depending on the sterically demand of the used NHC. Furthermore, the formation of bis-alkylgallanes was observed for the insertion of two equivalents of cAACMe with release of the NHC ligand. Chapter 4 describes investigations concerning the synthesis and reactivity of NHC-stabilized iodoalanes and iodogallanes, which are suitable for the formation of cationic aluminium and gallium dihydrides. The reaction of (NHC)∙EH2I (E = Al, Ga) stabilized by the sterically less demanding NHCs (NHC = Me2ImMe, iPr2Im, iPr2ImMe) with an additional equivalent of the NHC led to the formation of the cationic bis-NHC aluminium and gallium dihydrides [(NHC)2∙AlH2]+I- and [(NHC)2∙GaH2]+I-. Furthermore, the influence of the steric demand of the used NHC was investigated. The adduct (Dipp2Im)∙GaH2I was reacted with an additional equivalent of Dipp2Im. Due to the bulk of the NHC used, rearrangement of one of the NHC ligands from normal to abnormal coordination occurred and the cationic gallium dihydride [(Dipp2Im)∙GaH2(aDipp2Im)] was isolated. Chapter 5 of this thesis reports investigations concerning the reduction of cyclopentadienyl-substituted alanes and gallanes with singlet carbenes. NHC stabilized pentamethylcyclopentadienyl aluminium and gallium dihydrides (NHC)∙Cp*MH2 (E = Al, Ga) were prepared by the reaction of (AlH2Cp*)3 with the corresponding NHCs or by the salt elimination of (NHC)∙GaH2I with KCp*. The gallane adducts decompose at higher temperatures with reductive elimination of Cp*H and formation of Cp*GaI. . The reductive elimination is preferred for sterically demanding NHCs (Dipp2Im > iPr2ImMe > Me2ImMe). In addition, NHC ring expansion of the backbone saturated carbene Dipp2ImH was observed for the reaction of the NHC with (AlH2Cp*)3, which led to (RER-Dipp2ImHH2)AlCp*. Furthermore, the reactivity of the adducts (NHC)∙Cp*EH2 (E = Al, Ga) towards cAACMe was investigated. The reaction of the alane adducts stabilized by the sterically more demanding NHCs iPr2ImMe and Dipp2Im afforded the exceptionally stable insertion product (cAACMeH)Cp*AlH V-10 with liberation of the NHC. The reaction of the gallium hydrides (NHC)∙Cp*GaH2 with cAACMe led to the reductive elimination of cAACMeH2 and formation of Cp*GaI. A variety of neutral and cationic carbene-stabilized alanes and gallanes are presented in this work. The introduction of electronegative π-donor substituents (Cl-, I-, OR-, NR2-) and the investigations on the thermal stability of these compounds led to the conclusion that the stability of alanes and gallanes increased significantly by such a substitution. Investigations on the reactivity of the NHC adducts towards cAACMe resulted in various insertion products of the carbene into the Al-H or Ga-H bonds and the first cAACMe stabilized dichlorogallane was isolated. Furthermore, a first proof was provided that carbenes can be used specifically for the (formal) reduction of group 13 hydrides of the higher homologues. Thus, the synthesis of Cp*GaI from the reaction of (NHC)∙Cp*GaH2 with cAACMe was developed. In the future, this reaction pathway could be of interest for the preparation of other low-valent compounds of aluminium and gallium. N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Reaktivität NHC stabilisierter Lewis-Säuren/Lewis-Basen Addukte von Alanen und Galanen. Da sich dieses Forschungsgebiet insbesondere in den letzten fünf Jahren rasant entwickelt hat, wird im ersten Kapitel dieser Arbeit eine Übersicht über den gegenwärtigen Kenntnisstand gegeben. Nachdem in vorangegangenen Arbeiten in der Gruppe gezeigt werden konnte, dass NHC-substituierte Alane (NHC)∙AlH3 eine begrenzte Stabilität bezüglich einer möglichen Eliminierung von Dihydroaminal NHC-H2 bzw. der Ringerweiterung oder Ringöffnung des NHC-Liganden aufweisen, wird in Kapitel 2 der Arbeit der Einfluss elektronegativer π-Donor-Substituenten am Aluminium auf die Stabilität der dargestellten NHC-Alan-Addukte untersucht. Dazu wurden die Carben stabilisierten Alane (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) mit sekundären Aminen unterschiedlichen sterischen Anspruchs und Phenolen umgesetzt. Die π-Donor Substituenten sättigen das Lewis-saure Aluminiumzentrum ab, sodass eine Koordination eines zweiten NHC-Liganden nicht möglich ist. Ferner erhöhen die stark elektronegativen N- und O-Substituenten die Lewis-Acidität des Aluminiumatoms, das zu stärkeren Al-CNHC, aber auch Al-H-Bindungen führt und vermutlich deshalb die Insertion des Carbens in diese Bindung erschwert ist. Kapitel 3 beschreibt die Entwicklung der Synthese von Carben-stabilisierten Gallanen und Untersuchungen zu deren Reaktivität. Es wurde die Darstellung der NHC-Gallan-Addukte und ihre Reaktivität gegenüber NHCs und cAACMe im Detail untersucht. Durch die Substitution der Hydrid-Substituenten durch Chloride konnte mit zunehmendem Chlorierungsgrad eine erhöhte Stabilität der Addukte festgestellt werden. Die Reaktion von cAACMe mit den NHC-stabilisierten Gallanen führt zur Insertion des cAACMe in die Ga-H-Bindung unter Ausbildung chiraler und achiraler Insertionsprodukten, sowie der zweifachen Insertion von cAACMe unter Abspaltung des NHC-Liganden und Bildung von Bisalkylgallanen. Kapitel 4 beschreibt Untersuchungen zur Synthese und Reaktivität Carben-stabilisierter Iodtriele, welche zur Darstellung kationischer Aluminium- und Galliumdihydride geeignet sind. Die Reaktion der NHC-Iodotriele (NHC)∙EH2I (E = Al, Ga), welche durch weniger sterisch anspruchsvollen NHCs stabilisiert werden, mit einem zusätzlichen Äquivalent des entsprechenden NHCs führt zur Bildung der kationischen bis-NHC-Aluminium- und Galliumdihydride [(NHC)∙MH2]+I. Um den Einfluss des sterischen Anspruchs des NHCs zu untersuchen, wurde das Addukt (Dipp2Im)∙GaH2I mit einem zusätzlichen Äquivalent Dipp2Im umgesetzt. Aufgrund der Sterik der verwendeten Carbene führte dies zur Umlagerung eines NHCs von normaler zu abnormaler Koordination unter Bildung von [(Dipp2Im)∙GaH2(aDipp2Im)]I. Im fünften Kapitel der Arbeit werden Untersuchungen zur Reduktion Cp*-substituierter Triele mit Carbenen beschrieben. Die Darstellung NHC-stabilisierter Cp* -Alane- und Gallane (NHC)∙Cp*MH2 (M = Al, Ga) erfolgte durch die direkte Umsetzung von (AlH2Cp*)3 mit den entsprechenden NHCs, bzw. durch Salzeliminierung ausgehend von (NHC)∙GaH2I mit KCp*. Die Gallan-Addukte zersetzen sich bei höheren Temperaturen unter reduktiver Eliminierung von Cp*H und Bildung von Cp*GaI. Die reduktive Eliminierung findet bevorzugt für sterisch anspruchsvolle NHCs statt. Darüber hinaus wurde eine NHC Ringerweiterungsreaktion des im Rückgrat gesättigten Carbens Dipp2ImH bei der Reaktion mit (AlH2Cp*)3 unter Ausbildung von (RER-Dipp2ImHH2)AlCp*. Darüber hinaus wurde die Reaktivität der Addukte (NHC)∙Cp*EH2 (E = Al. Ga) gegenüber cAACMe untersucht. Die Reaktion der durch die sterisch anspruchsvolleren NHCs iPr2ImMe und Dipp2Im stabilisierten Addukte mit cAACMe führte zur Bildung des außergewöhnlich stabilen Insertionsproduktes (cAACMeH)Cp*AlH unter Abspaltung des NHC-Liganden. Die Reaktion der Galliumhydride (NHC)∙Cp*GaH2 mit cAACMe führte stattdessen direkt zur reduktiven Eliminierung von cAACMeH2 unter Ausbildung von Cp*GaI.Im Rahmen dieser Arbeit wurden neutrale und kationische Carben-stabilisierte Alane und Gallane eingehend untersucht. Durch das Einführen elektronegativer π-Donor-Substituenten und Untersuchungen zur thermischen Belastbarkeit dieser Verbindungen wurde nachgewiesen, dass sich die Stabilität der Alane bzw. Gallane durch eine derartige Substitution deutlich erhöht. Untersuchungen zur Reaktivität der NHC-Addukte gegenüber cAACMe brachte diverse Insertionsprodukte des Carbens in Al-H bzw. Ga-H-Bindungen hervor. Ferner konnte das erste cAACMe-stabilisierte Dichlorogalliumhydrid dargestellt werden. Darüber hinaus wurde ein erster Nachweis erbracht, dass Carbene gezielt zur (formalen) Reduktion von Hydriden der höheren Homologen der Gruppe 13 verwendet werden können. So wurde die Synthese von Cp*GaI aus der Reaktion von (NHC)∙Cp*GaH2 mit cAACMe entwickelt. In Zukunft könnte dieser Reaktionspfad zur Darstellung niedervalenter Verbindungen der Triele Aluminium und Gallium von Interesse sein. KW - Aluminiumhydridderivate KW - Gallium KW - Heterocyclische Carbene <-N> KW - Aluminium KW - Carbene Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212525 ER - TY - THES A1 - Müssig, Jonas Heinrich T1 - Synthese und Reaktvität von Gruppe 13 Elementhalogeniden gegenüber metallischen und nicht-metallischen Lewis-Basen T1 - Synthesis and Reactivity of Group 13 Elemental halides towards Metal and Nonmetal Lewis-Bases N2 - Im Rahmen der vorliegenden Arbeit wurden Dibortetrahalogenide dargestellt, deren Eigenschaften strukturell sowie spektroskopisch analysiert und deren Reaktivität gegenüber Lewis-basischen Hauptgruppenelementverbindungen untersucht. Durch anschließende Reaktivitätsstudien konnten unter anderem neuartige Diborene dargestellt und analysiert werden. Weiterhin wurde die Verbindungsklasse der Elementhalogenide der Gruppe 13 in der Oxidationsstufe +2 (B, Ga, In) und +3 (In) bezüglich ihrer Reaktivität gegenüber Übergangsmetall Lewis-Basen untersucht. Die gebildeten, neuartigen Bindungsmodi der Gruppe 13 Elemente am Übergangsmetall wurden strukturell, spektroskopisch sowie quantenchemisch analysiert. N2 - As a part of the present work diborontetrahalides were synthesized, analyzed and their reactivity was investigated towards Lewis-basic main group compounds. Subsequent reactivity studies were performed and novel Diborenes were synthesized and analyzed. Furthermore the reactivity of group 13 elemental halides in the oxidation state +2 (B, Ga, In) and +3 (In) was investigated towards Lewis-basic transition metal complexes. The novel bonding motifs of the group 13 elements at the metal center were investigated structurally, spectroscopically and by quantum chemical calculations. KW - Übergangsmetallkomplex KW - Bor KW - Lewis-Base KW - Gallium KW - Indium KW - Gruppe 13 element KW - Diboren Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-179831 ER - TY - THES A1 - Sieck, Carolin T1 - Synthesis and Photophysical Properties of Luminescent Rhodacyclopentadienes and Rhodium 2,2'-Biphenyl Complexes T1 - Synthese und photophysikalische Eigenschaften von lumineszierenden Rhodacyclopentadienen und Rhodium 2,2'-Biphenyl Komplexen N2 - The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment. Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes. In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies. In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors. Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before. As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane. Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes. On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature). With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure  and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster. In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields. Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands. Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work. Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed. Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes. Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided. The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct). CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase. N2 - Die photochemischen und photophysialischen Eigenschaften von Übergangsmetall-komplexen sind von großem Interesse, da solche Materialien für eine Vielzahl von Anwendungen, zum Beispiel in der Photokatalyse, für Sensing und Imaging, als Multiphotonenabsorptionsmaterialien und in der Herstellung von OLEDs genutzt werden können. Ein grundlegendes Verständnis des angeregten Zustands von Übergangsmetallverbindungen ist daher für die Entwicklung neuer Materialen für die oben genannten Anwendungen maßgeblich. Grundsätzlich können die Lumineszenzeigenschaften dieser Klasse von Verbindungen einerseits durch das Metall selbst, oder andererseits durch subtile Modifikation der Ligandensphäre beeinflusst werden. Darüber hinaus spielen Übergangsmetallkomplexe weiterhin eine wichtige Rolle in der modernen Synthesechemie. Insbesondere können Bindungen selektiv geknüpft werden, die in der klassischen organischen Chemie nur schwer zugänglich oder nicht realisierbar sind. So ermöglichen sie beispielsweise die effiziente und selektive Knüpfung von Kohlenstoff-Kohlenstoff-Bindungen. Ein bekanntes Beispiel für solch eine Bindungsknüpfung sind metallkatalysierte Ringschlussreaktionen. Hierbei spielen Metallacyclopentadien-Komplexe als Zwischenstufen bei metallvermittelten oder katalysierten Ringschlussreaktionen, wie beispielsweise der [2+2+2] Cyclotrimerisierung von Alkinen, eine Schlüsselrolle. Die jüngsten Forschungen konzentrierten sich auf die Synthese und Charakterisierung dieser metallacyclischen Zwischenprodukte, auch MC4-Ringsysteme genannt, welche strukturell mit Hauptgruppen-EC4-Systemen wie Borolen, Silolen, Thiophenen und Phospholen verwandt sind. Insgesamt ist diese Gruppe von Verbindungen (EC4-Analoga) wohlbekannt und hat aufgrund ihrer Elektronentransport- und optischen Eigenschaften beträchtliche Aufmerksamkeit erregt. Im Gegensatz zu Übergangsmetallanaloga zeigen Hauptgruppen-EC4-Systeme jedoch keine Phosphoreszenz, was auf eine ineffiziente Spin-Bahn-Kopplung zurückzuführen ist. Im Vergleich dazu zeigen Übergangsmetalle der fünften und sechsten Periode Phosphoreszenz, weshalb es von großem Interesse ist, die Lumineszenzeigenschaften der Metallacyclopentadiene näher zu untersuchen. Im Jahr 2001 entwickelte Marder et al. eine Eintopfsynthese von lumineszierenden 2,5 Bis(arylethinyl)rhodacyclopentadienen durch reduktive Kupplung von 1,4 Diarylbuta 1,3 diinen an einer geeigneten Rhodium(I)-Vorstufe. In den vergangenen Jahren wurden eine Vielzahl von Liganden (z.B. TMSA, S,S'-Diethyldithiocarbamat, usw.) und Substarten (1,4-Bis(p-R-phenyl)-1,3-butadiine oder verknüpfte ,-Bis(p-R-arylethinyl)alkane (R = Elektronen-ziehende oder schiebende Gruppen)) untersucht, wobei stets eine selektive Reaktion zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen beobachtet werden konnte. Trotz des Zentralatoms Rhodium wurde ausschließlich Fluoreszenz beobachtet. Um den Einfluss der Ligandensphäre um das Rhodiumatom auf die Interkombination (Intersystem-Crossing Prozesse, ISC) in diesen fluoreszierenden Rhodacyclopentadienen zu untersuchen und den Metallcharakter in den Grenzorbitalen durch Destabilisierung der Rhodium-d-Orbitale zu erhöhen, wurde Acetylacetonat (acac), ein  Elektronen-schiebender Ligand, eingeführt. Interessanterweise beobachtete Tay im Jahr 2010 durch Reaktion von , Bis(p R arylbutadiinyl)alkanen mit [Rh(κ2-O,O-acac)(PMe3)2] nicht nur die fluoreszierenden 2,5-Bis(arylethinyl)-rhodacyclopentadiene, sondern auch einen isomeren Rhodium 2,2' Biphenyl Komplex, der in ersten photophysikalischen Studien Phosphoreszenz zeigte. In dieser Arbeit wurden das Reaktionsverhalten und die Reaktionsbedingungen von [Rh(κ2 O,O acac)(L)2] (L = PMe3, P(p-tolyl)3) mit verschiedenen , Bis(p R-arylbutadiinyl)alkanen untersucht. Weiterhin wurde die Trennung der beiden Isomere 2,5-Bis(arylethinyl)rhodacyclopentadien (A) und Rhodium-2,2'-bph-Komplex (B) optimiert und die photophysikalischen Eigenschaften der beiden Isomere untersucht. Die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen führt selektiv zum 2,5-Bis(arylethinyl)rhodacyclopentadien-Isomer A, welches nur schwach fluoresziert. Wird jedoch der Phosphanligand P(p-tolyl3) mit PMe3 ersetzt, führt die Reaktion von [Rh(κ2 O,O acac)(PMe3)2] und ,-Bis(arylbutadiinyl)alkanen zu zwei verschiedenen Isomeren von MC4-Metallacyclen mit grundverschiedenen photophysikalischen Eigenschaften. 2,5 Bis(arylethinyl)rhodacyclopentadiene (A) werden durch eine reduktive [2+2]-Kopplung an Rhodium gebildet und weisen eine intensive Fluoreszenz auf. Das zweite Isomer waren Rhodium-2,2'-bph-Komplexe (B), die Phosphoreszenz zeigen. Dies rührt von einer ungewöhnlichen [4+2]-Cycloadditionsreaktion und einer nachfolgenden  H Verschiebung her. Die Kontrolle des Isomeren-Verhältnisses von 2,5-Bis(arylethinyl)rhodacyclopentadienen (A) und Rhodium-2,2'-bph-Komplexen (B) erfolgt durch Modifizierung der Alkankette des verknüpften ,-Bis(arylbutadiinyl)alkans. Die Veränderung der Ligandenbrücke von vier zu drei CH2-Gruppen begünstigt die Bildung des Rhodium-Biphenyl-Isomers B drastisch und bietet einen grundsätzlich neuen Weg, um Zugang zu photoaktiven Biphenyl-Metallverbindungen in guten Ausbeuten zu erhalten. Die photophysikalischen Eigenschaften sind bisher nur von einer begrenzten Anzahl an Biphenyl-Komplexen von Iridium, Palladium und Platin untersucht worden, wobei die geringe Menge an Beispielen vermutlich auf limitierte Synthesestrategien von verschieden-substituierten 2,2'-bph Übergangsmetall-komplexen zurückzuführen ist. Da die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen selektiv zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen mit P(p-tolyl3) als Phosphanliganden führt, und um die zeitaufwendige Trennung der Isomere zu vermeiden, wurde eine neue Synthesestrategie für 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexe mit PMe3 als Phosphanliganden entwickelt. Die relativ schwache Rhodium-P(p tolyl)3 Bindung von 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexen ermöglicht Liganden-Austauschreaktionen. Durch Zugabe von PMe3 im Überschuss bei Raumtemperatur wurde eine schrittweise Reaktion beobachtet, wobei zuerst die monosubstituierte Phosphan Rhodacyclopentadien-Zwischenstufe und anschließend durch Erwärmung vollständige Umsetzung und somit der zweifach PMe3 substituierte 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplex erhalten werden konnte. Die isolierten 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexe A (mit PMe3 als Phosphanliganden) und Rhodium-2,2'-bph-Komplexe B wurden auf ihre photophysikalischen Eigenschaften hin untersucht. Isomer A ist stark fluoreszierend mit hohen Quantenausbeuten von bis zu 54% und sehr kurzen Lebenszeiten (τ = 0,2  2,5 ns) in Lösung bei Raumtemperatur. Sogar bei 77 K in Glasmatrizen wird keine Phosphoreszenz beobachtet, was im Einklang mit früheren Beobachtungen von Steffen et al. ist, die zeigten, dass Spin-Bahn-Kopplung (SOC) durch das Schwermetallatom in 2,5-Bis(arylethinyl)rhodacyclopentadienen und 2,5 Bis(arylethinyl)iridacyclopentadienen vernachlässigbar ist. Der Ursprung dieser Fluoreszenz liegt in der reinen Intra-Ligand-Natur der angeregten Zustände S1 und T1. Das HOMO und das LUMO sind fast reine - und *-Ligandenorbitale und das HOMO ist energetisch gut von den gefüllten d-Orbitalen des Rhodiums getrennt. Die Abwesenheit von Phosphoreszenz in Übergangsmetallkomplexen ist aufgrund des dominierenden IL-Charakters der angeregten Zustände bei schwereren Homologen, im Vergleich zu Rhodium, und somit größeren Spin Bahn Kopplungskonstanten nicht ungewöhnlich, auch wenn ISC von S1→Tn ausreichend effizient ist, um Triplett-Zustände zu erreichen. Allerdings gibt es im Vergleich zu unseren Rhodacyclopentadienen sehr wenige Komplexe, die Fluoreszenz mit der Effizienz und mit diesen außergewöhnlich langsamen Intersystem-Crossing Prozessen im Nanosekundenbereich anstatt von einigen Pikosekunden oder schneller besitzen. Im Gegensatz dazu sind die Rhodium-2,2'-bph-Komplexe B ausschließlich phosphoreszierend, wie es für Übergangsmetallkomplexe erwartet wird. Sie zeigen bei langen Lebenszeiten (Hunderte von s) Phosphoreszenz-Quantenausbeuten von bis zu 33% bei Raumtemperatur in Lösung. Da auch bei niedriger Temperatur keine Fluoreszenz festgestellt wird, kann davon ausgegangen werden, dass S1→Tn-ISC schneller als Fluoreszenz und strahlungslose Relaxation aus dem S1-Zustand sein muss. Dies ist jedoch gegenläufig zum Verhalten der isomeren 2,5 Bis(arylethinyl)rhodacyclopentadiene, für die ein ungewöhnlich langsames ISC auf der Zeitskala auftritt, die mit Fluoreszenz konkurrenzfähig ist (siehe oben). Die sehr kleinen Werte für die Strahlungsgeschwindigkeitskonstanten weisen jedoch darauf hin, dass der T1-Zustand reinen 3IL-Charakter mit schwacher Spin-Bahn-Kopplung vom Rhodiumatom ausgehend besitzt. Die Phosphoreszenz-Effizienz dieser Komplexe in Lösung bei Raumtemperatur ist noch beeindruckender, da die nicht-strahlende Kopplung des angeregten Zustands mit dem Grundzustand typischerweise die Phosphoreszenz hemmt. Stattdessen erlaubt die Rigidität des organischen -Systems, dass der ligandenbasierte angeregte Triplettzustand für mehrere hundert s stabil vorliegt und einen effizienten strahlenden Übergang in den Grundzustand vollzieht. Die außergewöhnlich langen Lebensdauern und kleinen Strahlungsgeschwindigkeitskonstanten der Rhodium-2,2'-bph-Komplexe sind vermutlich ein Ergebnis des hochkonjugierten -Systems des organischen Liganden. Laut unseren TD-DFT-Studien wird die Elektronendichte durch Ladungstransfer vom Rhodiumatom auf die Arylethinylreste übertragen und verringert somit die Spin-Bahn-Kopplung des Metallzentrums, die für eine kurze Phosphoreszenzlebenszeit erforderlich wäre. Diese Ergebnisse zeigen, dass der π-chromophore Ligand maßgeblich Einfluss auf den angeregten Zustand hat, dass auch schwere Übergangsmetallkomplexe wie Rhodium fluoreszieren können, wie es eigentlich nur von Hauptgruppenanaloga bekannt ist. Aufgrund der erhaltenen Ergebnisse und im Hinblick auf die Modifikation der optischen Eigenschaften und darüber hinaus das Reaktionsverhalten dieser Rhodiumkomplexe zu erforschen, wurde der Einfluss der Ligandensphäre um das Rhodiumatom untersucht. In Anbetracht dessen, dass die P(p-tolyl)3-Liganden leicht durch die stärker -donierenden PMe3 Liganden er-setzt werden können, wurden Ligandenaustausch-reaktionen mit N heterocyclischen Carbenen (NHCs) als noch stärkere -Donoren unter-sucht. Die Addition von zwei Äqui-valenten NHC führt bei Raumtemperatur zur Substitution von nur einem Äquivalent P(p-tolyl3) und somit zur Bildung des monosubstituierten NHC Rhodiumkomplexes. Die Reaktion des isolierten Mono-NHC-Komplexes mit einem weiteren Äquivalent NHC bei Raumtemperatur führte jedoch auch nicht zum gewünschten Austausch des zweiten Phosphanliganden. Erhöhung der Reaktionstemperatur auf 60 °C resultiert in der Bildung des tetra-substituierten NHC-Rhodiumkomplexes [Rh(nPr2Im)4]+[acac]-. Um zweifach NHC-substituierte 2,5 Bis(arylethinyl)-rhodacyclopentadiene zu erhalten, wurde eine neue Syntheseroute entwickelt. Durch Reaktion des Bis-NHC-Komplexes [Rh(κ2 O,O acac)(nPr2Im)2] mit , Bis(arylbutadiinyl)alkanen bei Raumtemperatur konnten 2,5 Bis(arylethinyl)rhodacyclopentadiene mit NHC-Liganden in cis- und trans-Stellung zueinander erhalten werden und durch NMR-spektroskopische Messungen und Einkristallröntgenbeugungsanalyse identifiziert werden. Die Isolierung und volle Charakterisierung sowie eine fundamentale photophysikalische Studie konnten im Rahmen dieser Arbeit aus Zeitgründen nicht beendet werden. Weiterhin wurden die optischen Eigenschaften und das Reaktionsverhalten von Rhodiumkomplexen mit einem verkürzten konjugierten -System des chromophoren Liganden untersucht. Hierbei werden zur Synthese anstatt Tetrainen, Diine eingesetzt. Die Umsetzung von [Rh(κ2-O,O-acac)(PMe3)2] mit 1,7-Diaryl-1,6-heptadiinen führt zur selektiven Bildung von 2,5 Bis(aryl)rhodacyclopentadienen. Diese Verbindungen sind jedoch nur sehr schwach fluoreszierend, was sich in Quantenausbeuten ФPL < 1% und sehr kurzen Emissionslebenszeiten in Toluol bei Raumtemperatur zeigt. Vermutlich führt Schwingung und Rotation des Bis(phenyl)butadien-Grundgerüsts vermehrt zu strahlungsloser Relaxation in den Grundzustand und ist somit für die geringeren Quantenausbeuten im Vergleich zu PMe3-Komplexen mit dem Bis(phenylethinyl)butadien-Grundgerüst verantwortlich. Phosphoreszenz konnte auch bei Tieftemperaturmessungen bei 77 K in der Glasmatrix nicht beobachtet werden. Die Reaktionen von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit 1,7-Diaryl-1,6-heptadiinen führten jedoch zu einer metallvermittelten oder -katalysierten Cycloadditionsreaktion von Alkinen und zur Bildung von Dimerisierungs- und Trimerisierungsprodukten. Arylphosphan-Liganden (P(Ar)3 (Ar = Aryl)) gelten als schwächere -Donorliganden und haben daher eine höhere Tendenz zur Dissoziation. Hiermit lässt sich erklären, dass Rhodium(I)-Komplexe mit Arylphosphan-Liganden eine zunehmende Tendenz haben, katalytische Reaktionen einzugehen, während die stärkeren -Donor-Liganden (PMe3 oder NHCs) die Bildung stabiler Rhodiumkomplexe begünstigen. In Kapitel 4 werden die Ergebnisse der Untersuchung von NHCs und cyclischen (Alkyl)(amino)carbenen (CAACs) präsentiert. Diese Verbindungen besitzen einzigartige elektronische und sterische Eigenschaften und sind daher als Liganden für Katalysatoren in organokatalytischen Reaktionen von großem Interesse. In dieser Arbeit werden Studien von Substitutionsreaktionen an neuartigen Carbonylkomplexen von Rhodium und Nickel vorgestellt. Zur Charakterisierung und zur Einordnung von CAACmethyl wird mit der großen Menge an Daten, die für NHCs und sterisch- anspruchsvollere CAAC-Liganden zur Verfügung stehen, ein Überblick über physikochemische Parameter (Elektronik, Sterik und Bindungsstärke) gegeben. Die Reaktion von [Rh(-Cl)(CO)2]2 mit zwei Äquivalenten CAACmethyl führte bei tiefer Temperatur zur Bildung des mononuklearen Komplexes cis-[(RhCl(CO)2(CAACmethyl)]. Bei Raumtemperatur jedoch bildeten sich durch Reaktion von [Rh(-Cl)(CO)2]2 mit CAACmethyl der mononukleare Komplex [(RhCl(CO)(CAACmethyl)2], die chlorverbrückten Komplexe [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 und ein Kohlenmonoxid-Aktivierungsprodukt. Das Kohlenmonoxid-Aktivierungsprodukt wird vermutlich durch Reaktion von zwei Äquivalenten des CAACs mit CO und anschließender Umlagerung durch Migration der Dipp-Gruppe gebildet. Während klassische N-heterocyclische Carbene nicht elektrophil genug sind, um mit CO zu reagieren, gehen verwandte Diamidocarbene und (Alkyl)(amino)carbene Additionsreaktionen mit CO ein. Für die selektive Synthese des CAAC-disubstituierten mononuklearen Komplexes wurden acht Äquivalente CAACmethyl mit einem Äquivalent [Rh(-Cl)(CO)2]2 umgesetzt. Für die Auswertung von TEP-Werten wurde [Ni(CO)3(CAAC)] in Zusammenarbeit mit der Gruppe um Radius synthetisiert. Durch Isolierung der Komplexe [(RhCl(CO)(CAACmethyl)2] und [Ni(CO)3(CAAC)] war es weiterhin möglich, die elektronischen und ster-ischen Parameter von CAACmethyl zu untersuchen. Genau wie die sterisch anspruchsvolleren Ver-bindungen CAACmenthyl und CAACcy, ist das Methyl substituierte CAAC im Vergleich zu üblichen NHCs ein besonders starker -Donor. Während dieser einen sehr ähnlichen TEP-Wert von 2046 cm-1 aufweist, besitzt er zusätzlich ausgezeichnete -Akzeptor-Eigenschaften (P = 67,2 ppm Phosphinidenaddukt). Durch das tiefliegende LUMO und das kleine HOMO-LUMO-Gap sind CAACs sehr effektiv für die Isolierung einer Vielzahl von ansonsten instabilen diamagnetischen und paramagnetischen Spezies von Hauptgruppen- und Übergangs-metallverbindngen. Die elektronischen Eigenschaften erlauben auch freien CAACs, kleine Moleküle mit starken Bindungen zu aktivieren. Eine neuere Entwicklung ist die Verwendung von CAACs als Liganden in Übergangsmetall-komplexen, die bisher nur als kurzlebige katalytische Zwischenstufen postuliert wurden.[271,324] Die Isolierung dieser reaktiven Spezies ermöglicht ein besseres Verständnis für bereits bekannte katalytische Reaktionen, sowie die Entwicklung neuer Katalysatoren und Anwendungen. Sol entwickelte Radius et al.[300] zum Beispiel einen CAAC-Komplex aus Kobalt als Vorläufer für die Dünnfilmabscheidung von Werkstoffen und Steffen et al.[326] berichtete von CAAC-Kupfer-Komplexen mit sehr hohen Photolumineszenz-Quantenausbeuten, die in LED Geräten eingesetzt werden könnten. Mit der Entwicklung von günstigen und flexiblen Synthesemethoden für die Herstellung von CAACs und deren entsprechenden Übergangsmetallkomplexen sowie der Kenntnis ihrer elektronischen Eigenschaften scheint es sicher, dass Anwendungen rund um dieses Ligandensystem weiter zunehmen werden. KW - Fluorescence KW - Phosphorescence KW - Rhodium KW - Sonogashira coupling KW - Carbenes KW - Übergangsmetallkomplexe KW - Rhodium KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154844 ER - TY - THES A1 - Hofmann, Alexander T1 - Neue niedervalente Organoaluminiumverbindungen: Darstellung und Eigenschaften T1 - New low valent organoaluminium compounds: synthesis and reactivity N2 - Die vorliegende Arbeit befasst sich mit der Darstellung und der Reaktivität von cyclopentadienylsubstituierten, niedervalenten Aluminiumverbindungen. Mit der Einführung einer Cp*-Gruppe konnte ein neues, bromsubstituiertes Dialan dargestellt, charakterisiert und auf seine Reaktivitäten untersucht werden. Neben 1,2-Dialuminierungen von Alkinen sowie einer Nitreninsertion, war eine Lewis-Basen-induzierten Disproportionierung des Dialans zu beobachten. Die Lewis-Basen-induzierten Disproportionierung konnte angewendet werden, um eine monomere 1,3,5-Tri-tert-butylcyclopentadienyl-Al(I)-Spezies zu isolieren. Um das Reaktionsverhalten mit anderen Al(I)-Verbindungen zu vergleichen, wurden Umsetzungen mit Distickstoffmonoxid und Phenylazid untersucht. Dabei wurden ähnliche Strukturmuster wie bei den anderen Al(I)-Systemen beobachtet. Weiterhin konnten verschieden Al-B-Verbindungen mit unterschiedlichen B-Al-Bindungen dargestellt werden, unter anderem die erste B-Al-Mehrfachbindung. N2 - Within this work, the synthesis and reactivity of cyclopentadienyl substituted, low valent aluminium complexes was investigated. Introduction of a Cp*-group allowed the synthesis of a new dibromodialane. The reactivity of compound 2 includes 1,2-dialumination of alkynes, nitrene insertion into the Al-Al-Bond, and Lewis base induced disproportionation of dialane. With the method of Lewis base induced disproportionation, a monomeric 1,3,5-Tri-tert-butylcyclopentadienyl Al(I) species was isolated. For comparison of the reactivity with other Al(I)-compounds, it was reacted with Nitrous Oxide and phenylazide, obtaining structures that are similar to those obtained in analogous reactions with other Al(I)-systems. Furthermore several compounds with different B-Al-interactions were synthesized, including the first B-Al multiple bond KW - Aluminiumverbindungen KW - Koordinativ ungesättigte Verbindungen KW - Cyclopentadienylkomplexe KW - Bor-Aluminium-Verbindungen KW - Niedervalente Verbindungen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178526 ER - TY - THES A1 - Seufert, Jens T1 - Synthese und Reduktionsverhalten neuer Lewis-Basen-Addukte des Bors sowie Redox-aktiver Ligandentransfer durch Silylene T1 - Synthesis and reduction of novel Lewis-base adducts of boron and redox-active Ligand Transfer through silylenes N2 - Im Rahmen dieser Arbeit war es möglich, diverse Lewis-Basen für deren Einsatz zur Stabilisierung niedervalenter Borverbindungen zu testen. Dabei wurden neuartige Mono- und Diboran(4)-Addukte mit mesoionischen Carbenen, Phosphanen und Alkyl-verbrückten Carbenen synthetisiert, charakterisiert und deren Reduktionsverhalten getestet. Des Weiteren konnte gezeigt werden, dass elektronenreiche Bis(amidinato)- und Bis(guanidinato)silylene eine diverse Vielfalt an Reaktionstypen induzieren und dabei zu Redox-Reaktionen und Ligandenübertrag neigen. N2 - Within the scope of this work, a variety of Lewis-bases were tested for their capability to stabilize low-valent boron compounds. Thereby, novel adducts of mono- and diboranes with mesoionic carbenes, phosphines and alkyl-bridged carbenes were synthesized, characterized and their reduction behavior was tested. Furthermore, it was shown that electron-rich bis(amidinato)- and bis(guanidinato)silylenes induce a range of interesting reactions and are prone to ligand transfer as well as redox reactions. KW - Bor KW - Reaktivität KW - Silylen KW - Carbene KW - Ligandentransfer KW - verbrückende Carbene KW - mesoionische Carbene Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173987 ER -