TY - THES A1 - Zapf, Ludwig T1 - Novel Borane- and Phosphorane- Functionalized Anionic Carbene Ligands T1 - Neuartige Boran- und Phosphoran-funktionalisierte anionische Carbenliganden N2 - N-heterocyclic carbenes (NHC) are utilized for the stabilization of reactive compounds, for the activation of strong bonds, and as ligands in transition metal chemistry. In contrast to neutral NHCs, few examples of anionic or even dianionic NHCs are known. One approach for the synthesis of anionic carbenes is the deprotonation of neutral or anionic precursors, bearing Lewis acids instead of alkyl or aryl substituents. Following this strategy, novel anionic and dianionic NHCs, featuring weakly coordinating fluorinated borane and phosphorane substituents or coordinating tricyanoborane substituents were synthesized within the scope of this thesis. These carbenes possess unprecedented stabilities compared to related species. Furthermore, their electronic and steric properties can be directly adjusted by the type of Lewis acid attached. Their potential as ligands with highly shielding weakly coordinating substituents next to the carbene coordination center was demonstrated by the syntheses of the respective NHC selenium adducts and NHC gold(I) complexes. In contrast anionic NHCs with coordinating tricyanoborane moieties have an outstanding potential as ditopic ligands with coordination being possible at the carbene center and via the cyano groups. Their beneficial ligand properties were demonstrated by the syntheses of the respective NHC selenium adducts and NHC nickeltricarbonyl complexes. The combination of electronic properties, the large buried volume, the negative charge, the possibility to act as ditopic or ligands with weakly coordinating groups, and the ease of accessibility render borane- and phosphorane functionalized NHCs unique novel ligands. A further project of this PhD thesis deals with the steric properties of Lewis acids. Therefore, an easy-to-apply model was designed to quantify the steric demand of Lewis acids. Using the results of this evaluation, a second model was developed which judges the steric repulsion in Lewis acid/base adduct formation for arbitrary sets of acids and bases. N2 - N-heterozyklische Carbene (NHC) werden für die Stabilisierung reaktiver Verbindungen, für die Aktivierung starker Bindungen sowie als Liganden in der Übergangsmetallchemie eingesetzt. Im Gegensatz zu neutralen NHCs sind nur sehr wenige Vertreter anionischer oder gar dianionischer NHCs bekannt. Eine gute Strategie für deren Synthese stellt die Deprotonierung neutraler oder anionischer Vorstufen dar, welche Lewis-Säuren an Stelle von Alkyl- oder Arylsubstituenten tragen. Dieser Route folgend, wurden im Rahmen dieser Arbeit neue anionische und dianionische NHCs dargestellt, welche mit schwach koordinierenden, fluorierten Boran- und Phosphoransubstituenten oder mit koordinierenden Tricyanoboraneinheiten funktionalisiert sind. Diese Carbene besitzen beispiellose Stabilitäten, verglichen mit verwandten Verbindungen. Darüber hinaus können deren elektronischen und sterischen Eigenschaften direkt über die Wahl der Lewis-Säure gesteuert werden. Das Potential der Liganden mit stark abschirmenden schwach koordinierenden Substituenten in Nachbarschaft zum Carbenzentrum wurde durch die Synthese von NHC-Selen-Verbindungen sowie NHC-Gold(I)komplexen gezeigt. Im Gegensatz hierzu besitzen anionische NHCs mit koordinierenden Tricyanoboraneinheiten ein herausragendes Potential als ditope Liganden, da eine Koordination sowohl über das Carbenzentrum als auch über die Cyanogruppen möglich ist. Diese Vorteilhaften Ligandeneigenschaften wurden durch die Synthese entsprechender NHC-Selen-Addukte und NHC-Nickeltricarbonylkomplexe gezeigt. Somit macht die Kombination der elektronischen Eigenschaften, des großen verdeckten Volumens, der negativen Ladung, der Möglichkeit als ditoper Ligand oder als Ligand mit schwach koordinierenden Gruppen zu fungieren sowie die einfache Zugänglichkeit Boran- und Phosphoran-funktionalisierte NHCs zu einzigartigen neuartigen Liganden. Ein weiterer Teil dieser Arbeit setzt sich mit dem sterischen Anspruch von Lewis-Säuren auseinander. Hierfür wurde ein einfach anwendbares Modell entworfen, welches diesen quantifiziert. Ausgehend von diesen Ergebnissen wurde ein zweites Modell entwickelt, welches die sterische Abstoßung zwischen Lewis-Säure/Base-Addukten für beliebige Säure/Base-Kombinationen beurteilt. KW - Komplexe KW - Borane KW - Carbene KW - Phosphorane KW - Koordinationsverbindungen KW - Liganden Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-320781 ER - TY - THES A1 - Winner, Lena T1 - Synthese und Reaktivität neuer Iminoborane T1 - Synthesis and Reactivity of novel Iminoboranes N2 - Im Rahmen dieser Arbeit konnte der erste metallfreie, an Raumtemperatur ablaufende Wasserstofftransfer von Amminboran (NH3BH3) auf Iminoborane durchgeführt werden. Bei der Umsetzung von NH3BH3 mit Di tert butyliminoboran XXIIIa wurde die Bildung des hydrierten Iminoborans 1 beobachtet. DFT Rechnungen belegen einen konzertierten H+/H- Transfer von NH3BH3 mit einer Aktivierungsenergie weit unter der vergleichbarer Wasserstoffübertragungsreaktionen. Da trotz zahlreicher Versuche keine geeigneten Einkristalle von 1 für eine strukturelle Charakterisierung erhalten werden konnten, wurde 1 mit IPr bzw. etherischer HCl umgesetzt, wobei das Addukt 2 bzw. das 1,2 Additionsprodukt 3 isoliert und vollständig charakterisiert werden konnte. Darüber hinaus konnten weitere sterisch anspruchsvolle disubstituierte Amminborane dargestellt werden, die ebenfalls die Fähigkeit besitzen, das Di tert butyliminoboran XXIIIa zu hydrieren. Dafür wurden die Arylamminborane (Aryl = Dur (4) & Tip (5)) dargestellt und mit XXIIIa umgesetzt. Hierbei bildeten sich neben 1 die entsprechenden Arylaminoborane 6 und 7. Ein weiteres Ziel war die Synthese neuartiger Iminoborane. Dafür wurden zwei ferrocenylsubstituierte Aminoboranpräkursoren dargestellt (Schema 53). Über eine Chlorsilan Eliminierung sollte aus Verbindung 8 das entsprechende Iminoboran 9 synthetisiert werden. Jedoch zeigten sich in 11B NMR spektroskopischen Untersuchungen nur Zersetzungsprodukte. Des Weiteren wurde versucht, eine HCl Abstraktion mit Hilfe von verschiedenen Abstrahierungs-Reagenzien, ausgehend von dem Aminoboranpräkursor 10, zu initiieren. Diesbezüglich wird 10 mit diversen Substraten (Na[BAr4F], Na[BAr4Cl], NaH, LiTmp und Na[HMDS]) umgesetzt, wobei sich allerdings für keine der eingesetzten Reagenzien die gewünschte HCl Eliminierung zeigte. Ferner wurde der Aminoboranpräkursor 1,4-Bis{[tert-butyl(trimethylsilyl)amino]-chlorboranyl}durylen 14 erfolgreich dargestellt. Allerdings verlief die Chlorsilan-Eliminierung zu dem Bis-(tert-butylimino)durylenboran 15 im Pyrolyseofen erfolglos. Weitere Syntheseversuche der Aminoborane 16, 17 und 19 als Präkursoren für das (tert-Butylimino) tris bzw. bis (trifluormethyl)phenylboran führten nicht zum gewünschten Ziel (Abbildung 29). Die Bildung dieser Aminoborane läuft unselektiv ab und es werden erhebliche Mengen unerwünschter Nebenprodukte beobachtet. Daher können keine analysenreinen Endprodukte isoliert werden. Im Gegensatz dazu gelang die Darstellung des CF3 meta substituierten Präkursors 21. Durch anschließende Chlorsilan-Eliminierung konnte das (tert Butylimino) 3,5 bis(trifluormethyl)phenylboran 22 isoliert werden. Als Oligomerisierungsprodukt von 22 wurde das Dewar Borazin-Derivat 23 nachgewiesen. Weiterhin wurde der Aminoboranpräkursor Trietylphenyl[tert-butyl(trimethylsilyl)amino]chlorboran 24 erfolgreich dargestellt (Schema 56). Nach anschließender Chlorsilaneliminierung im Pyrolyseofen konnte die Bildung des (tert Butylimino)-2,4,6-triethylphenylborans 25 beobachtet werden. Durch Erwärmen von 24 für zwei Stunden auf 100 °C wurde das Dimerisierungsprodukt 26 detektiert. Die Umsetzung des Iminoborans 25 mit cAAC lieferte bei tiefen Temperaturen das Addukt 28. Erwärmen des Reaktionsgemisches auf Raumtemperatur führte zur Bildung des Cyclopropan Intermediats 30. Ferner ergab das Erhitzen auf 50 °C unter intramolekularem Ringschluss das bicyclische 1,2-Azaborolidin 31. Außerdem wurde das Azaborinin 27 über eine metallkatalysierte Syntheseroute, ausgehend von dem Iminoboran 25 und dem Rhodiumkatalysator [{RhCl(PiPr3)2}2] LXV, unter Acetylenatmosphäre dargestellt. Angesichts weiterer Reaktivitätsstudien von Iminoboranen gegenüber Lewissäuren, wurde das Di tert butyliminoboran XXIIIa mit Tris(pentafluorphenyl)boran umgesetzt (Schema 59). Bei der Reaktion findet eine Carboborierung statt; demgemäß handelt es sich um eine 1,2 Addition des Borans an das Iminoboran unter Bor-Kohlenstoff Bindungspaltung. DFT Rechnungen zufolge beträgt die freie Energie der Reaktion -17.4 kcal mol-1 und läuft damit exergonisch ab. Des Weiteren konnte mit dem NHC IDip (1,3-Bis(2,6-diisopropylphenyl)imidazol-2-yliden) in Reaktivitätsstudien mit (tert Butylimino)mesitylboran XXIIIb die Bildung des Aminoborans 34 beobachtet werden. Dieses entsteht durch die Migration eines Dipp Restes des NHC´s zum Stickstoffatom des vormaligen Iminoborans. Dieser Reaktionstyp stellt ein neues Beispiel für die Reaktivität zwischen Iminoboranen und NHCs im Gegensatz zu klassischen Adduktformationen dar. Einen weiteren neuartigen Beitrag zur Iminoboranchemie lieferte die Reaktion von Di tert butyliminoboran XXXII und dem von Tacke et al. entwickelten Bis(amidinato)silylen XCVI. Bei dem Reaktionsprodukt handelt es sich um eine bicyclische Silaiminboranstruktur, welche aus der Insertion von XCVI in die BN Dreifachbindung des Iminoborans hervorgeht. DFT Rechnungen bestätigen eine exergonische Reaktion mit einer Gesamtenergie von -28.4 kcal mol-1. Eine Insertion in eine Bor-Stickstoff-Dreifachbindung ist unter den Reaktivitätsstudien mit Iminoboranen ein seltener Reaktionstyp. Überdies wurde die Reaktion zwischen dem Pentafluorphenyl-(tert-butyl)iminoboran (XCVII) und PiPr3 beobachtet. Dabei fand formal eine CH Aktivierung der drei Isopropyleinheiten von PiPr3 mit den Boratomen von drei XCVII-Einheiten statt. Zusätzlich bindet ein Sauerstoff an das Phosphoratom. Die Ursache dieser Beobachtung und der Mechanismus dieser Reaktion ist bislang nicht geklärt. N2 - Within the scope of this work, the first spontaneous, metal-free, room temperature hydrogen transfer from ammonia-borane to iminoborane can be pointed out. When di tert butyliminoborane XXIIIa was reacted with NH3BH3 the formation of 1 could be revealed (Scheme 1). DFT-calculations of the mechanism indicate a concerted transfer of H+ and H– with an activation energy far below those of comparable concerted transfer hydrogenations.[126-129] However, because of several attempts to crystallise 1 failed, 1 was reacted with IPr and HCl, respectively to yield compound 2 and 3, which were fully characterised (Scheme 1). Beyond that, the sterically more demanding arylamineboranes (aryl = dur (4) & tip (5)) were synthesised and it could be shown that these compounds were also able to hydrogenate di-tert-butyliminoborane XXIIIa (Scheme 2). Therefore, the reaction of 4 and 5 with XXIIIa yielded not only compound 1, but also the corresponding arylaminoboranes 6 and 7. A further goal was the synthesis of novel iminoboranes. Therefore, the two ferrocenyl substituted aminoborane precursors were synthesised (Scheme 3). The chlorosilane elimination should lead to the iminoborane 9 starting from compound 8. Unfortunately, 11B NMR spectroscopic investigations showed only decomposition products. Furthermore, the aminoborane precursor 10 was treated with different substrates (NaBAr4F, NaBAr4Cl, NaH, LiTmp und NaHMDS) to eliminate HCl and to achieve compound 9. Unfortunately, no HCl elimination took place. Moreover, the aminoborane precursor 1,4-bis{[tert-butyl(trimethylsilyl)amino]-chloroboranyl}durylene 14 was synthesised successfully. However, the chlorosilane elimination to the 1,4-bis-(tert-butylimino)durylenborane 15 in the pyrolysis oven was unsuccessful (Scheme 4). Further attempts to synthesise 16, 17 and 19 as precursors for the (tert-butylimino) tris or bis (trifluoromethyl)phenylborane did not lead to the desired iminoborane through halogensilane elimination (Figure 1). The formation of these aminoboranes proceed unselectively and the formation of undesired by products can be observed. For that reason, no pure products could be isolated. In contrast, the synthesis of the CF3 meta substituted precursor 21 (Scheme 5) was successful. Further, the chlorosilane elimination led to the (tert butylimino)-3,5 bis(trifluormethyl)-phenylborane 22 which could be isolated. The oligomerisation product turned out to be the trimerisation product Dewar borazine derivative 23 (Scheme 5). Furthermore, the aminoborane precursor triethylphenyl[tert-butyl(trimethylsilyl)amino]-chloroborane 24 was synthesised (Scheme 6). The following chlorosilane elimination in the pyrolysis oven led to the formation of the (tert butylimino)-2,4,6-triethylphenylborane 25. After warming compound 24 for two hours at 100 °C the dimerisation product 26 was detected (Scheme 6). The reaction of the novel iminoborane 25 with cAAC at low temperature provided the adduct 28. Warming the reaction mixture to room temperature led to the formation of the cyclopropanintermediate 30. Further, the heating of 30 to 50 °C gave the bicyclic 1,2 azaborilidine compound 31 (Schema 57). In addition, the azaborinine 27 could be synthesised utilizing a [2+2]/[2+4] cycloaddition reaction of the iminoborane 25 with acetylene in the presence of the rhodium catalyst [{RhCl(PiPr3)2}2] (LXV) (Scheme 8). Considering further reactivity studies of iminoboranes towards a Lewis acid, di tert butyliminoborane XXIIIa was reacted with tris(pentafluorophenyl)borane (Scheme 9). Thus, a carboboration took place, a 1,2 addition of the borane to the iminoborane with a BC bond cleavage. DFT calculations showed a total energy of the reaction of 17.4 kcal mol1, which implies an exergonic reaction. Besides, the reaction of the NHC, IDip (1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene) with (tert Butylimino)mesitylborane XXIIIb yielded the aminoborane 34, through a shift of one carbene-bound dipp substituent to the iminoborane nitrogen atom of the former iminoborane (Scheme 10). This reaction is another example of an unexpected reactivity of iminoboranes and is in contrast with classical adduct formation. An additional contribution to the iminoborane chemistry is the reaction of di tert butyliminoborane XXXII with the bis(amidinato)silicon(II) XCVI of the Tacke group (Scheme 11). The reaction gives a bicyclic silaimineborane structure, which was formed through an insertion of XCVI in the BN triple bound of the iminoborane. DFT calculations confirm an exergonic reaction with a total free energy of -28.4 kcal mol-1. The insertion in the B-N bond of iminoboranes are very rare, which makes this type of reaction very interesting. Moreover, the reaction of (pentafluorophenyl)-tert-butyliminoborane XCVII and PiPr3 was observed. In this reaction a formal CH activation of the three isopropyl units of PiPr3 with the boron atoms of three XCVII units took place. Additionally an oxygen binds at the phosphorus atom. The reason of this observation and the mechanism of this reaction is not yet clear. KW - Bor KW - Iminoboran KW - Mehrfachbindung KW - Heterocyclische Carbene <-N> KW - Reaktivität KW - NHC KW - cAAC Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-169169 ER - TY - THES A1 - Wennemann, Benedikt T1 - Untersuchungen zur Synthese und Reaktivität von Übergangsmetallborylenkomplexen der Gruppe 8 T1 - Synthesis and reactivity of group 8 borylene complexes N2 - Zusammenfassung Die vorliegende Arbeit wurde in drei Teilbereiche untergliedert. Der erste Teil beschäftigte sich mit der Untersuchung des anionischen Systems K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) und dessen Reaktivität gegenüber Dihalogenboranen. Der zweite Teil widmete sich der Untersuchung der Reaktivät des Eisenbis(borylen)komplexes 45 gegenüber verschiedenen Lewis-Basen und Lewis-Säuren. Im letzten Teil der Arbeit wurde die Insertion von Metallfragmenten der Übergangsmetalle der Gruppe 8 in die M=B-Doppelbindung des Borylenkomplexes 28 untersucht. Durch Umsetzungen der anionischen Osmiumverbindung 64 mit Cl2BDur und Br2BDur konnten die Borylkomplexe 67 und 68 erhalten werden (SCHEMA 56). Die Untersuchungen zum sterischen Einfluss des Silylsubstituenten zeigten, dass die Osmiumkomplexe 65 und 66 mit SiEt3- bzw. SiPh3-Substituenten in die entsprechenden Borylkomplexe überführt werden können, wobei diese Spezies nicht analysenrein isoliert werden konnten. Der Borylkomplex 68 konnte nachfolgend weder unter thermischen Bedingungen, noch unter Verwendung der Lewis-Base Pyridin bzw. des Halogenabstraktionsmittels Na[BArCl4] in einen terminalen Osmiumborylenkomplex umgewandelt werden (Schema 57). Anfängliche Studien zur Reaktivität der anionischen Rutheniumverbindungen 81-83 gegenüber Dihalogenboranen haben sich auf den sterischen Einfluss der borgebundenen Arylsubstituenten konzentriert. Hierdurch konnte gezeigt werden, dass eine Ph-Substitution keine ausreichende Stabilisierung der entstehenden Borylkomplexe liefert. Im Gegensatz dazu erwies sich der sterische Anspruch von Duryl- und Mesitylsubsituenten als ideal für die Bildung stabiler Borylkomplexe, wohingegen die sterische Überfrachtung der Supermesityl- und Terphenylsubstituenten eine Salzeliminierungsreaktion von vornherein verhindert. Der Einfluss des Halogensubstituenten in X2BDur (X = Cl, Br) wurde anhand der Reaktivität gegenüber 81 näher untersucht. In beiden Fällen konnten die entsprechenden Borylkomplexe 84 und 85 isoliert und charakterisiert werden. Da bei der Umsetzung mit Br2BDur auch noch weitere Produkte zu erkennen waren, wurde der sterische Einfluss des Silylsubstituenten in 82 und 83 auf die Produktverteilung bei Reaktion mit Br2BDur untersucht. Es hat sich gezeigt, dass die Wahl der Reaktionsbedingungen einen starken Einfluss auf den Reaktionsverlauf ausübt. So konnte durch regelmäßiges Entgasen der Reaktionslösung der Rutheniumborylenkomplex 86 erhalten werden, während eine thermische Reaktionsführung unter CO-Atmosphäre selektiv zu einer Silylboraneliminierung führte, dessen Produkt indirekt über die Bildung von [(OC)4Ru(PMe3)] (75) nachgewiesen werden konnte (Schema 59). Während die Umsetzung der analogen Eisenspezies K[(OC)3Fe(PMe3)(SiEt3)] (92) mit Cl2BDur lediglich zu Zersetzung führte, konnte im Verlauf der Reaktion mit Br2BDur eine neue, sehr interessante Reaktivität beobachtet werden. Hier war die Salzeliminierungsreaktion mit einer Alkylboraneliminierung verbunden, wobei der intermediär entstehende Silylenkomplex (95) in situ zum dinuklearen, zweifach-verbrückten Bis(silylen)komplex 94 dimerisierte (SCHEMA 60). Unter photolytischen Bedingungen konnte 94 weiter in den dreifach-verbrückten Bis(silylen)komplex 96 überführt werden, welcher den ersten strukturell charaktersierten Komplex dieser Art darstellt. In SCHEMA 61 sind alle relevanten Reaktivitäten des Systems K[(OC)3M(PMe3)(SiR3)] gegenüber X2BDur (X = Cl, Br) zusammen mit den Ergebnissen vorangegangener Arbeiten in einer Übersicht dargestellt. Der zweite Teil dieser Arbeit beschäftigte sich mit der Reaktivität des Eisenbis(borylen)komplexes [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Zunächst wurde 45 mit verschiedenen Lewis-Basen umgesetzt. Während die Umsetzungen mit verschiedenen NHCs (IMe, IMes, IDipp) nur zu Zersetzung führte, konnte durch die Reaktion mit cAACMe der außergewöhnliche Komplex 98 isoliert und vollständig charakterisiert werden (SCHEMA 62). Dieser stellt das erste Beispiel für eine intramolekulare Spaltung eines Carbonylliganden in einem einkernigen Komplex dar. Anschließend wurde die Reaktivität von 45 gegenüber den Lewis-Säuren BBr3, AlBr3 und GaBr3 untersucht. Während die Umsetzung von 45 mit AlBr3 lediglich zu Zersetzung führte, konnte mit GaBr3 als Hauptprodukt Br2BDur nachgewiesen werden. In einem möglichen Reaktionsmechanismus ist die Reaktion mit einer 1,2-Addition des GaBr3 unter Bildung eines Gallylkomplexes verbunden, welcher nach Abspaltung von Br2BDur in einen instabilen Gallylenkomplex übergeht (SCHEMA 63). Die Umsetzung von 45 mit BBr3 lieferte bei tiefen Temperaturen den zweikernigen Tris(borylen)komplex 100 (SCHEMA 64), welcher ein Analogon des wohlbekannten Fe2(CO)9 darstellt. Das abschließende Kapitel dieser Arbeit befasste sich mit der Insertion von Metallfragmenten der Gruppe 8-Übergangsmetalle in die M=B-Doppelbindung von [(OC)5Mo=BN(SiMe3)2] (28). Während bei den Umsetzungen von 28 mit [(OC)4Fe(PMe3)] (90) und [(OC)4Ru(PMe3)] (75) die MOLPs 104 und 105 nur NMR-spektroskopisch nachgewiesen werden konnten, war die Isolierung des MOLPs 103 sowie dessen strukturelle Charakterisierung möglich (SCHEMA 65). Bemerkenswert ist hierbei, dass die Reaktion sowohl unter thermischen als auch unter photolytischen Bedingungen durchgeführt werden kann. N2 - Summary The first part of this work focused on the development of a new route to neutral terminal group 8 transition metal borylene complexes. Thus, the reactivity of the anionic system K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) towards dihaloboranes was studied in detail. The second part of this work dealt with the reactivity studies of the iron bis(borylene) complex 45 towards common lewis bases and acids. The final part of this work concentrated on the insertion of group 8 transition metal fragments into the M=B double bond of the molybdenum borylene complex 28. The reaction of the anionic osmium complex 64 with X2BDur (X = Cl, Br) resulted in the formation of the osmium boryl complexes 67 and 68 (SCHEME 1). Studies concerning the steric influence of the silyl substituent showed that the osmium species 65 and 66 containing SiEt3 and SiPh3 groups can also be converted into the respective boryl complexes, while the resulting products could not be isolated. All attempts to convert the osmium boryl complex 68 into an osmium borylene complex, either under thermal conditions or by reaction with lewis bases and halide abstracting reagents, consistently failed (SCHEME 2). Initial studies on the reactivity of the anionic ruthenium complexes 81-83 towards dihaloboranes focused on the steric influence of the aryl ligand on boron. The results clearly showed that the small phenyl substituent is not able to efficiently stabilize the resulting boryl complexes. By contrast, the steric demand of the mesityl and duryl ligands appeared to be sufficient to afford stable boryl complexes, while supermesityl and terphenyl substituents were sterically too encumbered even for the initial salt elimination step (SCHEME 3). The influence of the halide substituents in X2BDur (X = Cl, Br) was evaluated by reactivity studies towards 81. In both cases, boryl complexes 84 and 85 could be isolated and fully characterized. However, reaction of 81 with Br2BDur suggested the formation of additional products, for which reason the steric influence of the silyl substituents in 81 and 82 on the nature of the products was studied in detail. It turned out that the reaction conditions have a strong influence on the observed pathways. Thus, periodical degassing favoured the formation of the neutral terminal ruthenium borylene complex 86, while thermal treatment under an atmosphere of CO led to silyl borane elimination (SCHEME 4). While the reaction of the analogous iron species K[(OC)3Fe(PMe3)(SiEt3)] (92) with Cl2BDur resulted in decomposition, reaction with Br2BDur uncovered a new, highly interesting reactivity pattern. Here, initial salt elimination was followed by alkyl borane elimination step while the in situ generated silylene complex readily dimerized to form the dinuclear bis(silylene) complex 94 (SCHEME 5). Photolysis of 94 in solution subsequently converted 94 into the triply-bridged dinuclear complex 96, which is the first structurally characterized example of this class of compounds. The second part of this work focused on the reactivity of the iron bis(borylene) complex [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Intitally, 45 was reacted with different lewis bases. While reaction with NHCs (IMe, IMes, IDipp) only resulted in decomposition, reaction with cAACMe enabled the isolation of the uncommon complex 98 (SCHEME 7), which represents the first example of an intramolecular carbonyl cleavage in a mononuclear complex. Next, the reactivity of 45 towards lewis acids BBr3, AlBr3 and GaBr3 was studied. While reaction of 45 with AlBr3 was accompanied by decomposition, reaction with GaBr3 selectively afforded Br2BDur as the main product. A plausible mechanism involves the 1,2-addition of GaBr3 to afford a gallyl species, which subsequently eliminates Br2BDur to generate a labile gallylene complex (SCHEME 8). At low temperatures, the reaction of 45 with BBr3 resulted in the formation of the dinuclear tris(borylene)complex 100 (SCHEME 9), which can be considered an analogue of the well-known [Fe2(CO)9]. The final part of this work was concerned with the insertion of group 8 transition metal fragments into the M=B-double bond of [(OC)5Mo=BN(SiMe3)2] (28). While the reaction of 28 with [(OC)4Fe(PMe3)] (90) and [(OC)4Ru(PMe3)] (75) afforded the MOLPs 104 and 105, which could only be identified by NMR-spectroscopy, the isolation and structural characterization of the MOLP product 103 of the reaction with [(OC)4Os(PMe3)] (59) was feasible (SCHEME 10). Remarkably, this reaction can be carried out both under thermal and photolytic conditions. KW - Borylgruppe KW - Borylenkomplexe KW - Borylkomplexe KW - Übergangsmetallkomplexe Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130755 ER - TY - THES A1 - Welz, Eileen T1 - Theoretical Investigations on Inorganic, Boron-containing Biradicals with a unique Structure T1 - Theoretische Untersuchungen von anorganischen, biradikalischen Borverbindungen mit einer einzigartigen Struktur N2 - In this work, biradical boron containing systems with various structures are investigated to reveal the dependency of the biradical character on the ligated carbene (NHC, CAAC) and the related steric demands of the substituents. N2 - In dieser Arbeit werden biradikalische Bor-Systeme mit unterschiedlichen Strukturen untersucht, um die Abhängigkeit des biradikalischen Charakter von der Carben-Einheit, die am Bor (NHC, CAAC) gebunden ist, und den sterischen Anspruch der Substituenten zu analysieren. KW - Biradical KW - Bor KW - theoretical chemistry KW - SF-DFT KW - Benchmark KW - CAAC KW - NEVPT2 KW - NHC Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202598 ER - TY - THES A1 - Weber, Manuel T1 - Synthese, Charakterisierung und Eigenschaften neuartiger carboranyl-substituierter NHC-Liganden und Anwendung in der Metallkomplex-Chemie T1 - Synthesis, characterisation and properties of novel carboranyl-substituted NHC ligands and application in metal complex chemistry N2 - Im Fokus der Dissertation stand die Synthese von Vorstufen (Imidazoliumsalze) für NHC-Liganden sowie die Umsetzung dieser Verbindungen zu N-heterocyclischen Carbenen unter Verwendung des Carba-closo-dodecaborat-Anions. Hierbei wurde der Cluster über die Position B12 oder B7 an das Stickstoffatome des Imidazols gebunden. Zur Synthese wurden unterschiedliche Routen ausgehend von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(12-PhI-closo-1-CB_{11}H_{11}\) sowie den entsprechenden 7-Isomeren untersucht und miteinander verglichen. Die isomerenreinen Synthesen wurden hinsichtlich ihrer Vor- und Nachteile untersucht und so optimiert. Es wurden sowohl unsymmetrische Imidazoliumsalze mit dem Carba-closo-dodecaborat-Anion auf der einen Seite und Alkyl- oder Arylreste (Butyl, Methyl, Phenyl, p-Methoxyphenyl, p-Fluorphenyl-, Vinyl-, Benzyl- und Mesitylsubstituenten) als auch die symmetrische Variante mit zwei Carboranylcluster synthetisiert. Besonders hervorzuheben ist hierbei, dass die Synthese des Bis(1,3-Carboran-12-yl)imidazolatanions in einer Buchwald-Hartwig-Kreuzkupplungsreaktion durch Umsetzung der Reagenzien \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}]\) durch 1 zu 1 Umsetzung miteinander reagiert haben. In den meisten bisher literaturbekannten und im Rahmen der Doktorarbeit untersuchten Buchwald-Hartwig-Kreuzkupplungsreaktionen sind 4-14 Äquivalente des Amins notwendig. Darüberhinaus erfordert das Amin häufig eine Aktivierung durch Umsetzung zu Lithiumorganylen. Dies war bei der Umsetzung von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) mit \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}] \) nicht notwendig und zeigt den starken elektronenschiebenden Effekt des Clusters auf. Die unsymmetrischen Imidazoliumsalze konnten durch Umsetzung mit n-Butyllithium zu C2-NHC-Derivate umgesetzt werden. Bei der Umsetzung des Bis(1,3-Carboran-12-yl)imidazolatanions bildete sich zunächst ein Gemisch aus dem C2- und C5-Isomer, des Weiteren ist anteilig auch die Deprotonierung am Clusterkohlenstoffatom aufgetreten. N2 - The dissertation focused on the synthesis of precursors (imidazolium salts) for NHC ligands and the conversion of these compounds to N-heterocyclic carbenes using the carba-closo-dodecaborate anion. Here, the cluster was attached to the nitrogen atom of the imidazole via the B12 or B7 position. For synthesis, different routes starting from \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(12-PhI-closo-1-CB_{11}H_{11}\) as well as the corresponding 7-isomers were investigated and compared. The isomerically pure syntheses were investigated with respect to their advantages and disadvantages and thus optimised. Both asymmetric imidazolium salts with the carba-closo-dodecaborate anion on one side and alkyl or aryl residues (butyl, methyl, phenyl, p-methoxyphenyl, p-fluorophenyl, vinyl, benzyl and mesityl substituents) and the symmetric variant with two carboranyl clusters were synthesised. Of particular note here is that the synthesis of the bis(1,3-carboran-12-yl)imidazolate anion was achieved in a Buchwald-Hartwig cross-coupling reaction by reacting the reagents \(Cs[12-I-closo-1-CB_{11}H_{11}]\) and \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11}]\) by 1 to 1 reaction. In most of the Buchwald-Hartwig cross-coupling reactions known so far in the literature and investigated in the doctoral thesis, 4-14 equivalents of the amine are required. Furthermore, the amine often requires activation by conversion to lithium organyls. This was not necessary in the reaction of \(Cs[12-I-closo-1-CB_{11}H_{11}]\) with \(Cs[12-imidazolyl-closo-1-CB_{11}H_{11})\), demonstrating the strong electron-pushing effect of the cluster. The unsymmetrical imidazolium salts could be converted to C2-NHC derivatives by reaction with n-butyllithium. During the reaction of the bis(1,3-carboran-12-yl)imidazolate anion, a mixture of the C2 and C5 isomer was initially formed, and furthermore, deprotonation also occurred proportionally at the cluster carbon atom. KW - NHC KW - N-Heterocyclische Carbene KW - Carboranylsubstituierte NHC KW - NHC-Gold(I)-Komplexe KW - NHC-Selenkomplexe KW - Imidazolatsalze KW - Imidazoliumsalze Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258143 ER - TY - THES A1 - Ullrich, Stefan T1 - Synthese und Reaktivität NHC-stabilisierter Diborene T1 - Synthesis and reactivity of NHC-stabilized diborenes N2 - In der vorliegenden Arbeit wurde der Fokus auf die Synthese neuer Diborene mit unterschiedlichem Substitutionsmuster gerichtet. Ein Ziel bestand darin, die Gruppe der heteroaromatisch substituierten Diborene, die sich bisher aus den literaturbekannten Thienyl-substituierten Diborenen 59 und 60 zusammensetzt, um weitere Vertreter zu bereichern. In diesem Kontext konnte das Furanyl-substituierte Diboren 85 synthetisiert und charakterisiert werden (Schema 59). Die Festkörperstruktur von 85 zeigt eine koplanare Anordnung zwischen der B=B-Doppelbindung und den Furanylsubstituenten, was als Hinweis auf eine Konjugation zwischen der B=B-Doppelbindung und den Heteroaromaten gewertet werden kann und damit Parallelen zu den Thienyl-substituierten Diborenen 59 und 60 erkennen lässt. Analog dazu weist 85 drei Banden im UV-Vis-Absorptionsspektrum auf, die anhand von quantenchemischen Rechnungen den entsprechenden elektronischen Anregungen zugeordnet werden können. Demzufolge sind die HOMOs ausschließlich an der B=B-Doppelbindung und die LUMOs an den Furanylringen, sowie den NHCs lokalisiert. Cyclovoltammetrische Messungen legen zudem den Elektronenreichtum des Furanyl-substituierten Diborens 85 offen und sprechen für dessen Eignung als starkes, neutrales nichtmetallisches Oxidationsmittel. Darüber hinaus zeigen sie eine teilweise reversible Oxidation zu dem entsprechenden Monoradikalkation auf. Zur Realisierung weiterer heteroaromatisch substituierter Diborene wurden Versuche unternommen die Pyrrolylgruppe als Substituent zu etablieren, die noch elektronenreicher verglichen zu Furanyl- und Thienylgruppen ist. Die erfolgreiche Darstellung des NHC-stabilisierten Diborens 88 konnte mittels NMR-Spektroskopie verifiziert werden, jedoch gelang die weitere Charakterisierung aufgrund der extremen Empfindlichkeit von 88 nicht (Schema 59). Der Einsatz von vergleichsweise großen NHCs wie IMes zur kinetischen Stabilisierung der B=B-Doppelbindung eines Pyrrolyl-substituierten Diborens war nicht erfolgreich. Schema 59: Synthese der NHC-stabilisierten heteroaromatisch substituierten Diborene (85, 88) durch Reduktion der korrespondierenden NHC-Boran-Addukte (84, 87). In unmittelbarer Fortführung der aussichtsreichen Arbeiten von Dr. Philipp Bissinger wurde an geeigneten Syntheserouten zu den NHC-stabilisierten Diborenen 95 und 99 mit derivatisierten Thiophensubstituenten gearbeitet. Ausgehend von den BMes2- und B(FMes)2-funktionalisierten Thiophensubstituenten konnten über mehrere Reaktionssequenzen die korrespondierenden NHC-Boran-Addukte synthetisiert und charakterisiert werden. Die Reduktion dieser NHC-Boran-Addukte erzeugt intensiv gefärbte Lösungen, deren 11B-NMR-spektroskopische Untersuchungen Hinweise auf die Generierung der Diborene 95 und 99 lieferten (Schema 60). Darüber hinaus wird die erfolgreiche Darstellung des Diborens 95 durch Röntgenstrukturanalyse an Einkristallen gestützt. Schema 60: Synthese der Diborene 95 und 99 mit derivatisierten Thiophensubstituenten. Die Isolierung größerer Mengen der Diborene 95 und 99 in analytisch reiner Form gelang jedoch bislang nicht. UV-Vis Absorptionsspektroskopie, Cyclovoltammetrie und TD-DFT-Rechnungen offenbaren die drastische Einflussnahme der BMes2- bzw. der B(FMes)2-Gruppe auf die Eigenschaften der resultierenden Diborene 95 und 99. Vor allem die elektronenziehende B(FMes)2-Gruppe senkt die Grenzorbitale energetisch erheblich ab und verringert das HOMO-LUMO-gap signifikant. Die Hauptabsorptionsbande im UV-Vis-Absorptionsspektrum findet sich im nahinfraroten Bereich (NIR) und ist damit gegenüber jener des Thienyl-substituierten Diborens 59 stark bathochrom verschoben. Ziel anknüpfender Arbeiten der Gruppe um Braunschweig ist die Optimierung der Synthese der Diborene 95 und 99, sowie die weitere Charakterisierung der physikalischen Eigenschaften und die Erforschung der Reaktivitäten. Ein weiteres Ziel dieser Arbeit war die Synthese von Vinyl-substituierten Diborenen. Das NHC-Boran-Addukt 102 konnte, ausgehend von 1,1-Diphenylethen, erfolgreich dargestellt werden. Die Reduktion mit KC8 erzeugte eine intensiv gefärbte Reaktionslösung, deren 11B-NMR-spektroskopische Untersuchung eine gegenüber bekannten Diborenen leicht tieffeldverschobene Resonanz im 11B-NMR-Spektrum zeigt. Die Isolierung und zweifelsfreie Identifizierung des Reaktionsprodukts gelang aufgrund der hohen Empfindlichkeit bislang nicht. Weitere Versuche ein Diboren mit vinylogem Substitutionsmuster zu synthetisieren, in dem die alpha-Position des Vinyl-Substituenten durch eine Phenylgruppe besetzt ist, waren nicht zielführend (Schema 61). Anknüpfend an die Arbeiten von Thomas Steffenhagen, dem die Darstellung des ersten [2]Diboraferrocenophans mit Diborenbrücke 109 und dessen Identifizierung mittels NMR-Spektroskopie gelang, wurden Versuche unternommen, 109 zu kristallisieren. Dabei konnten geeignete Einkristalle zur röntgenstrukturanalytischen Charakterisierung erhalten werden und das Strukturmotiv im Festkörper bestätigt werden (Schema 62). Zentraler Gegenstand dieser Arbeit war neben der Synthese und Charakterisierung von neuen Diborenen die Untersuchung der Chemie der reaktiven B=B-Doppelbindung. Dazu wurden unter anderem Reaktivitätsstudien mit Münzmetallkomplexen durchgeführt, um die Koordinationschemie der heteroaromatisch substituierten Diborene 59 und 85, sowie des Diboren-verbrückten [2]Diboraferrocenophans 109 zu erforschen. Die Umsetzungen von 59, 85 und 109 mit CuCl führten zu den entsprechenden Münzmetall π-Diboren-Komplexen 111-113 (Schema 63). Röntgenstrukturanalytische Untersuchungen zeigen die T-förmige Geometrie der Komplexe, die aus der side-on Koordination des jeweiligen Diborens an das Metallzentrum resultiert. Das erhaltene Strukturmotiv entspricht damit dem der literaturbekannten Münzmetall-π-Diboren-Komplexe 71 und 72. Aufgrund der hohen Empfindlichkeit konnten allerdings weder die Ausbeute bestimmt noch eine detaillierte NMR-spektroskopische Charakterisierung durchgeführt werden. Das photophysikalische Potential dieser Verbindungsklasse wird dennoch in qualitativen Tests durch Bestrahlung mit UV-Licht erkennbar. Die Koordination von Kupferalkinen an die B=B-Doppelbindung der Verbindungen 59, 85 und 109 verläuft demgegenüber selektiv (Schema 63). Die ebenfalls T-förmigen Komplexe (114-116) erweisen sich als deutlich stabiler als die CuCl-Analoga und konnten demzufolge in analysenreiner Form isoliert werden. Allerdings zeigen diese in qualitativen Tests kein Lumineszenzverhalten. Eine genauere Analyse dieser Befunde erfolgte bislang nicht, ist aber aktueller Bestandteil der Forschung der Arbeitsgruppe um Braunschweig. Da die heteroaromatisch substituierten Diborene wegen ihres energetisch hoch liegenden HOMO bereitwillig zur Abgabe von Elektronen tendieren, wie in cyclovoltammetrischen Messungen gezeigt werden konnte, wurde deren potentielle Verwendung als Reduktionsmittel untersucht. Die Diborene 59, 60, 85 und 88 wurden dazu mit dem milden Oxidationsmittel (C7H7)BArf4 oxidiert und die Monoradikalkationen 117-120 mittels EPR-Spektroskopie nachgewiesen (Schema 64). Aufgrund der hohen Empfindlichkeit der Radikale (117-120) konnte keine weitere Charakterisierung erfolgen. Durch Oxidation des Diborens 85 mit Iod konnte Verbindung 121 erhalten werden (Schema 65). Die Festkörperstruktur zeigt einen dreigliedrigen Heterocyclus, bestehend aus einem positiv polarisierten Iodatom, das eine B2-Einheit verbrückt und damit die gleichwertige Beschreibung als Iodoniumion in Analogie zu den gleichnamigen Intermediaten, die bei der Addition von Halogenen an Alkene entstehen, rechtfertigt. Die Hydroborierungsreaktion ist eine bekannte Additionsreaktion von H-B-Bindungen an C=C-Doppelbindungen und konnte in dieser Arbeit erfolgreich auf die alkenanalogen Diborene übertragen werden. Die Reaktion des heteroaromatisch substituierten Diborens 85 mit Catecholboran ergibt das Triboran 122, das strukturell den klassischen Hydroborierungsprodukten von Alkenen gleicht. In Analogie dazu wird von einer syn-Addition der H-B-Bindung an die B=B-Doppelbindung des Diborens ausgegangen. Wird hingegen das Hydroborierungsreagenz Durylboran eingesetzt, so findet eine nicht-klassische Addition der H-B-Fragmente an die B=B-Doppelbindung statt. Der genaue Mechanismus, der zur Bildung des Triborans 124 führt, ist bisher nicht aufgeklärt (Schema 66). Wird das [2]Diboraferrocenophan 109, das ein cyclisches, cis-konfiguriertes Diboren als Brücke beinhaltet, mit Catecholboran bzw. Durylboran umgesetzt, so werden ebenfalls Triborane (123 und 125) generiert, die sich jedoch von den Triboranen 122 und 124 in ihrer Struktur grundlegend unterscheiden (Schema 67). Ein Erklärungsansatz hierfür könnte in der hohen Ringspannung im cyclischen Diboren-verbrückten [2]Diboraferrocenophan 109 verglichen mit dem acyclischen heteroaromatisch substituierten Diboren 85 liegen. Ein Schritt zur Bildung des Triborans 123 aus der Umsetzung von 109 mit Catecholboran findet offenbar, wie die Festkörperstruktur von 123 nahe legt, durch eine Ringerweiterung des Fünfringes des Catecholborans zu einem Sechsring durch Insertion eines Boratoms der Diborenbrücke statt. Um genauere Aussagen zur Bildung von 123 wie auch 125 treffen zu können, sind quantenchemische Studien zu diesem Thema aktuelles Arbeitsgebiet der Arbeitsgruppe um Braunschweig. Die Reaktivität der elektronenreichen B=B-Doppelbindung der heteroaromatisch substituierten Diborene wurde in der vorliegenden Arbeit gegenüber der Substanzklasse der Chalkogene überprüft. Dabei stellte sich heraus, dass die Reaktionen der Diborene 60 und 85 mit elementarem Schwefel durch reduktive Insertion von Schwefel in die B=B-Doppelbindung zur Bildung von Produktgemischen aus Trithiadiborolanen und Diborathiiranen führen. Es zeigte sich, dass die gezielte Darstellung der Trithiadiborolane 126 und 127 durch Einwirkung von Ultraschall gelingt, wohingegen das Thiadiborolan 128 selektiv durch Reaktion des Diborens 85 mit Ethylensulfid oder einem Überschuss an Triphenylphosphansulfid zugänglich gemacht werden kann (Schema 68). Die Reaktion der Diborene 60 und 85 mit elementarem Selen bzw. elementarem Tellur ergibt die entsprechenden Diboraselenirane (129 und 130) bzw. Diboratellurirane (131 und 132), die durch reduktive Insertion des entsprechenden Chalkogens in die B=B-Doppelbindung entstehen (Schema 69). Eine vollständige Spaltung der B=B-Bindung durch Insertion weiterer Äquivalente Selen bzw. Tellur ist auch unter Behandlung mit Ultraschall nicht zu beobachten. Das Furanyl-substituierte Diboren 85 konnte zudem mit chalkogenhaltigen Verbindungen erfolgreich umgesetzt werden. 85 reagiert mit Diphenyldisulfid und Diphenyldiselenid selektiv durch Addition der E-E-Bindung an die B=B Doppelbindung (Schema 70). Die diaseteroselektiven, analysenreinen 1,2-Additionsprodukte (133, 137) lassen auf einen Mechanismus, der in Analogie zu den Additionen von Disulfiden bzw. Diseleniden an Alkene über die Zwischenstufe entsprechender Sulfonium- bzw. Seleniumionen verläuft, folgern. Alternativ dazu muss eine konzertierte syn-Addition der E-E-Bindung in Erwägung gezogen werden. Demgegenüber konnten aus den Umsetzungen des Thienyl-substituierten Diborens 60 mit Diphenyldisulfid, Diphenyldiselenid und isoPropylthiol keine analysenreinen Produkte isoliert werden. Das Diboren-verbrückte [2]Diboraferrocenophan 109 reagiert mit Diphenyldisulfid in einer 1,2-Addition der S-S-Bindung an die B=B-Doppelbindung, wobei ein sp2-sp3-Diboran durch Abspaltung eines NHCs gebildet wird. Die verkürzte Fe-Bsp2-Bindungslänge lässt auf eine Stabilisierung des sp2-Boratoms durch das Fe-Zentrum schließen. In einer vergleichbaren Reaktion mit Dimethyldisulfid konnte das identische Strukturmotiv, ein sp2-sp3-Diboran, erhalten werden (Schema 71). Die Reaktion des [2]Diboraferrocenophans 109 mit Diphenyldiselenid führt zur vollständigen Spaltung der B=B-Doppelbindung unter Addition zweier Se-Se-Bindungen von zwei Äquivalenten Diphenyldiselenid und der damit einhergehenden Bildung der acyclischen bisborylierten Ferrocenspezies 139 (Schema 72). Die Bildung des einfachen Additionsprodukts, was wahrscheinlich intermediär auftritt, wurde auch bei Umsetzung mit nur einem Äquivalent Diphenyldiselenid nicht beobachtet. Die Umsetzung des Furanyl-substituierten Diborens 85 mit isoPropylthiol verläuft unter Addition der H-S-Bindung an die B=B-Doppelbindung, wobei in allen Fällen das syn-Additionsprodukt 142 erhalten wurde (Schema 72). Die von Thomas Steffenhagen beschriebene Addition der H-S-Bindung von isoPropylthiol an die B=B-Doppelbindung des [2]Diboraferrocenophans 109 ergibt dagegen selektiv ein anti-Additionsprodukt. In einer vergleichbaren Reaktion des [2]Diboraferrocenophans 109 mit tert-Butylthiol wurden anhand von NMR-Spektroskopie Indizien für die Bildung eines 1,2-Additionsproduktes erhalten. Allerdings gelang die Isolierung eines analysenreinen Produktes bislang nicht. N2 - Initially the focus of this work was the synthesis and characterization of novel diborenes bearing a variety of boron substituents. Of particular interest was the introduction of new heterocyclic functionalized diborenes synthesized in a manner akin to two literature-known thienyl functionalized diborenes (59 and 60). Through these studies, the synthesis and charaterization of the furanyl-functionalized diborene 85 has been achieved (scheme 1). The solid-state structure of 85 displays coplanarity between the respective B2 unit and the furanyl rings, indicating some degree of pi-conjugation between the heterocyclic substituents and the central B2 unit. This structural feature closely parallels the thienyl-functionalized diborenes, which also exhibit coplanarity between the central B2 unit and the peripheral heterocycles as well. Similar to 59 and 60, the furanyl-functionalized diborene 85 reveals three absorption bands in the UV-vis spectrum. According to TD-DFT calculations the excitations can be assigned to transitions between the frontier orbitals. The HOMOs are exclusively located at the central B=B double bond, whereas the LUMOs are predominantly delocalized over the furanyl substituents and the NHCs. Cyclovoltammetry measurements prove that the diborene 85 is extraordinarily electron rich, which is in accordance with previous data taken from the characterization of the thienyl-substituted diborenes (59, 60). Therefore the heterocyclic-functionalized diborenes can be considered strong electron donors. Respectively, these species rank among the class of strong, neutral non-metallic reducing agents. Moreover the partial reversible reduction wave suggests the formation of a stable monoradical cation, which was also observed in similar cyclovoltametry measurements of the related diborenes 59 and 60. A synthetic approach to establish a pyrrolyl-functionalized diborene was also investigated. The successful synthesis of the IMe-stabilized diborene 88 was verified by NMR spectroscopy (scheme 1). Further charaterization of 88 failed because of the instability of the compound in both the solid state and in solution. The application of a more sterically demanding NHC (IMes) led only to the respective NHC-borane adduct 89, which could not be reductively coupled to the desired diborene. In a continuation of the promising work of Dr. Philipp Bissinger, the search for a reliable synthesis route to the heterocyclic-substituted diborenes 95 and 99 was examined (scheme 2). These species consisted of thiophene-derived heterocyclics substituted with BMes2 and B(FMes)2 groups, respectively. Starting from the BMes2- and B(FMes)2-functionalized thiophene precursors, the synthesis of the respective NHC-borane adducts was first accomplished over several reaction steps. The reduction of these adducts produced intensely colored solutions of the respective diborenes 95 and 99 as confirmed by 11B NMR spectroscopic investigations. The diborene 95 was structurally confirmed by X-ray diffraction studies of suitable crystals, however, isolation of the pure compounds (95, 99) in larger amounts for detailed NMR spectroscopic studies could not be achieved. Investigations via UV-vis spectroscopy, cyclovoltammetry and TD-DFT-calculations revealed the significant influence of the BMes2 and the B(FMes)2 groups on the chemical and photophysical properties of both diborenes 95 and 99. The strong electron withdrawing B(FMes)2 group was found to lower the energy of the LUMO, subsequently decreasing the HOMO-LUMO energetic gap dramatically. The main absorption band in the UV-vis spectrum of 99 is detected in the near infrared (NIR) range, bathochromically shifted in comparison to the parent thienyl-substituted diborene 59. A following prospective study in the Braunschweig group could be the optimization of the synthesis of these diborenes, accompanied by the characterization and exploration of their reactivity patterns. Another part of this thesis dealt with the synthesis of diborenes bearing vinyl-group functionalized boron precursors. Based on the 1,1-diphenylethene starting material, the corresponding NHC-borane adduct was generated through several sequential reactions. Reduction with KC8 afforded an intensely colored reaction mixture that upon filtration had a 11B NMR resonance slightly downfield shifted with respect to the literature-known diborenes. However, isolation of the product and its identification were unsuccessful. Further attempts to prepare a diborene bearing a vinyl substituent with a phenyl group in the alpha-position were attempted but were ultimately unrewarding (scheme 3). Extending the work of Thomas Steffenhagen on the synthesis of the first diborene-bridged [2]diboraferrocenophane 109, experiments aimed at crystallizing 109 were successfully performed. Single crystal X-ray diffraction experiments confirmed the highly strained structure [2]diboraferrocenophane 109 bearing a cis-configured bridging diborene (scheme 4). Besides the synthesis and characterization of new diborenes, exploration of the chemistry of the reactive B=B double bond was also a major interest in this thesis. Therefore diborene reactivity studies with coinage metal complexes were carried out in order to evaluate the ability of the heterocyclic-substituted species 59, 85 and the diborene-bridged [2]diboraferrocenophane (109) to interact with these metal species. The reactions of 59, 85 and 109 with CuCl led to the formation of the corresponding copper complexes 111-113 (scheme 5). Single X-ray crystallographic analysis of 111 and 112 revealed a T-shaped geometry for these complexes. This geometry results through side-on coordination of the diborene to the metal center. The structural motif is equivalent to those of literature known diborene CuCl pi-complexes. Due to their instability, further characterization of the complexes 111-113 could not be achieved. In addition, the potential of the diborene CuCl pi-complexes was realized qualitatively via irradiation with UV light, indicating strong luminescence. The coordination of copper alkyne complexes at the B=B double bond of 59, 85 and 109 proceeded selectively and resulted in the formation of T-shaped complexes 114-116, which are structurally similar to the CuCl complexes 111 and 112 (scheme 5). Remarkably, 114 and 116 display enhanced stability compared with the CuCl complexes 111 and 112 and could be characterized via NMR spectroscopy. However contrary to the CuCl complexes, the diborene Cu alkynyl  complexes 114-116 showed no signs of luminescence while under UV irradiation. A concurrent detailled study of these findings is underway in the Braunschweig group. Owing to their energetically high-lying HOMOs, diborenes can easily be oxidized as shown in CV measurements. Therefore their application as reducing agent was explored in this thesis. The diborenes were utilized in redox reactions with (C7H7)BArf4 to yield the monoradical cations 117-120 (scheme 6). These species could be subsequently be verified by EPR spectroscopic measurements. Due to the instability of the radical species 117-120, further characterization could not be accomplished. Upon oxidation with elemental iodine (I2), the diborene 85 could be succcessfully converted to the dicationic species 121. This species can be considered an iodonium ion analogous to the compounds generated in reactions of alkenes with iodine (scheme 7). The solid state structure shows a three-membered heterocyclic ring in which the positively charged iodine atom symmetrically bridges the two boron atoms. The diborene species were tested for hydroboration reactivity in a manner analogous to the well-known hydroboration reaction between borane B-H bonds and C=C double bonds. This work utilized the B=B double bonds of diborenes to serve as alkene mimics. The reaction of the furanyl-substituted diborene 85 with catecholborane afforded the triborane 122. This product is presumably formed via syn-addition of the borane B-H bond to the diborene B=B double bond. Treatment of the same diborene 85 with durylborane led to the formation of a non-classical species in contrast to known alkene hydroboration reactivity. As can be seen in Scheme 8, the species formed seemingly arises upon cleavage of a B-Cfuryl bond (scheme 8). The detailled mechanism for this reaction has thus far not been elucidated. In reactions of 109 with catecholborane or durylborane, the triboranes 123 and 125 were generated, respectively (scheme 9). The structural motifs of both species show the ring expansion of the diboraferrocenophane that likely occurs through the insertion of the BDur and BCat fragments into the diborene B=B double bond. Additionally, in the case of the reaction with catecholborane, one boron atom must insert into the B-O bond to yield compound 123. The reaction patterns between the heterocycle-substitued diborene 85 and the [2]diboraferocenophane 109 towards hydroboration reagents have been shown to differ dramatically. One reason for this divergent reactivity could be the tendency of the diborene-bridged [2]diboraferrocenophane 109 to alleviate some of its ring strain. To gain further knowledge into this reactivity, theoretical studies are currently underway in the Braunschweig group. The electron rich B=B double bond of diborenes was further exploited in reactivity studies with elemental chalcogen reagents as well as chalcogen-containing reagents. The reaction products of the heterocycle-substituted diborenes 60 and 85 with elemental sulfur proved to be dependent upon the reaction conditions. Reactions performed at room temperature were observed to generate a mixture of diborathiiranes and trithiadiborolanes, whereas the selective formation of the trithiadiborolanes (126, 127) has been accomplished by ultrasonification of the reaction mixture. The trithiadiborolanes 126 and 127 are formed by the reductive insertion of three sulfur atoms into the B=B double bond while the partial insertion of one sulfur atom affords the diborathiirane 128. Further reactivity studies were conducted with triphenylphosphine sulfide and ethylene sulfide reagents in order to probe the application of sulfur-atom-donor compounds. These test reactions yielded successful transfer of the sulfur atom to the B=B double bonds of the diborene 85 (scheme 10). The reactions of diborenes 60 and 85 with elemental selenium or tellurium exclusively afforded the heterocyclic three-membered diboraseleniranes 129 and 130 and diboratelluriranes 131 and 132, respectively (scheme 11). The formation of similar five-membered heterocyclic compounds relative to the trithiadiborolanes was not observed under ultrasonification of the reaction mixtures. Besides the reactions with elemental chalcogens, the heterocyclic-substituted diborene 85 was succesfully reacted with diorganyldichalcogens (diphenyl disulfide and diphenyl diselenide), whereby 1,2-addition of the E-E single bond of the dichalcogens to the B=B double bond was observed (scheme 12). In contrast, the reaction of the thienyl-substituted diborene with diphenyl diselenide led to the formation of the desired compound 138, however isolation of the pure product was not successful. The structural motifs of 133 and 137 are indicative of either a syn-addition mechanism or a thiol-ene Michael-addition-type mechanism. A radical mechanism can be ruled out, since only one stereoisomer was generated through these studies. In order to validate these proposed mechanisms, ongoing theoretical studies are being performed by the Braunschweig group. The reaction of diborene-bridged [2]diboraferrocenophane 109 with diphenyl disulfide resulted in the formation of a sp2-sp3 diborane through cleavage of one B-CNHC bond. The short Fe-Bsp2 distance indicates some interaction between the Fe core and the Bsp2 atom. In a similar reaction the [2]diboraferrocenophane 109 formed an identical sp2-sp3 diborane when reacted with dimethyl disulfide (scheme 13). The B=B double bond of [2]diboraferrocenophane 109 was completely cleaved upon addition of two equivalents of diphenyl diselenide, yielding compound 139 (scheme 14). The simple 1,2-addition product of one Se-Se bond to the B=B double bond could not be detected or isolated as an intermediate, even if only one equivalent of diphenyl dislenide was applied. The reactions of the heterocycle-substituted diborenes 85 and 60 with isopropyl mercaptan result in addition of one H-S bond to the B=B double bonds to yield the syn-addition products 142 and 143 (scheme 14). In constrast, the anti-addition product 110 of the reaction of [2]diboraferrocenophane 109 with isopropyl mercaptan has been recently isolated by Thomas Steffenhagen. The reaction of 109 with a tert-butyl-mercaptan was also attempted. NMR spectroscopic investigations indicated the successful formation of the 1,2-addition product. Since attempts to crystallize 144 did not succeed, the structure of 144 could not be confirmed. KW - Mehrfachbindung KW - Bor KW - Ferrocenophane KW - Diboren KW - NHC KW - Heterocyclische Carbene <-N> Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140485 ER - TY - THES A1 - Tröster, Tobias T1 - Darstellung und Reaktivität von Beryllolen sowie Dibenzoberyllolen T1 - Synthesis and Reactivity of berylloles as well as dibenzoberylloles N2 - Im Rahmen dieser Arbeit konnte zunächst die Reaktivität des CAAC-substituierten 2,3,4,5-Tetraphenylberyllols gegenüber häufig verwendeten Substraten für Ringerweiterungsreaktionen und Cycloadditionen untersucht werden. Weiterhin wurde die Darstellung eines neuen monocyclischen Beryllols beschrieben, welches aufgrund seines veränderten Rückgrats eine erhöhte Reaktivität verspricht. In einem weiteren Teil dieser Arbeit wurde die Verbindungsklasse der Dibenzoberyllole erstmals zugänglich gemacht. Zusätzlich wurde deren Reduktionsverhalten und thermische Zersetzung beispielhaft anhand eines CAAC-substituierten Dibenzoberyllols aufgeklärt. Im letzten Teil erfolgte die Untersuchung der Reaktivität dieser neuen Verbindungsklasse gegenüber Lewisbasen und typischen Substraten für Ringerweiterungsreaktionen. Weiterhin wurde die Möglichkeit, Dibenzoberyllole als Transferreagenzien für das Biphenylrückgrat zu nutzen, ermittelt. N2 - Within this thesis, the reactivity of the CAAC-substituted 2,3,4,5-tetraphenyl beryllole towards frequently used substrates for ring extension reactions and cycloadditions could first be investigated. Furthermore, the preparation of a new monocyclic beryllole was described, which promises increased reactivity due to its modified backbone. In another part of this work, the compound class of dibenzoberylloles was made accessible for the first time. In addition, their reduction behaviour and thermal decomposition were elucidated using a CAAC-substituted dibenzoberyllole as an example. In the last part, the reactivity of this new class of compounds towards Lewis bases and typical substrates for ring extension reactions was investigated. Furthermore, the possibility of using dibenzoberylloles as transfer reagents for the biphenyl backbone was determined. KW - Beryllium KW - Heterocyclische Verbindungen KW - Beryllole KW - Dibenzoberyllole KW - Beryllafluorene Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289117 ER - TY - THES A1 - Trumpp, Alexandra T1 - Synthese und Reaktivität von Diboran(4)- und Diboran(4)-Addukt-Verbindungen T1 - Synthesis and reactivity of diborane(4)- and diborane(4)-adduct-compounds N2 - In der vorliegenden Arbeit wurde zum einen das Koordinationsverhalten von Lewis-Basen an die Lewis-aciden Borzentren der symmetrisch konfigurierten 1,2-Dihalogendiborane(4) des Typs B2R2X2 (R = NMe2, Mes, Dur, tBu; X = Cl, Br, I) und des unsymmetrisch 1,1 substituierten Diborans(4) F2BB(Mes)2, sowie die Eigenschaften und die Reaktivität der erhaltenen sp2–sp3 Diboran(4)-Verbindungen untersucht. Zum anderem wurde die Fähigkeit des 1,1-substituierten Diborans(4) F2BB(Mes)2 zur oxidativen Addition der B–F- bzw. B–B-Bindung an Bisphosphan-Platin(0)-Komplexe untersucht. N2 - The present work focuses on two different reactivities of diboranes(4): a)the coordination behaviour of Lewis bases to the Lewis-acidic boron centres of symmetrical 1,2-dihalodiboranes(4) of the type B2R2X2 (R = NMe2, Mes, Dur, tBu; X = Cl, Br, I) and the unsymmetrical 1,1-dimesityl-2,2-difluorodiborane(4) F2BB(Mes)2, furthermore the properties and reactivity of the prepared sp2–sp3 diboranes(4) were investigated, and b)the oxidative addition of 1,1-dimesityl-2,2-difluorodiborane(4) towards low-valent bis(phosphine)platinum precursors. KW - Diborane KW - Bor KW - Diboran(4) KW - Addukt KW - sp2-sp3 KW - boron KW - adduct Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136812 ER - TY - THES A1 - Thiess, Torsten T1 - Synthese und Reaktivität von 1,4-Diaza-2,3-diborininen T1 - Synthesis and reactivity of 1,4-diaza-2,3-diborinines N2 - In der vorliegenden Arbeit wurde die Synthese, Funktionalisierung und Reaktivität von 1,4,2,3-Diazadiborininen untersucht. Zu Beginn sollten Bis(dimethylamino)-substituierte Diazadiborinine mit unterschiedlichen Resten an den Stickstoffatomen dargestellt werden, deren weitere Funktionalisierung später im Fokus stand. Die Synthese erfolgte durch Reduktion von 1,4-Diazabutadienen mit elementarem Lithium und anschließender Salzeliminierungsreaktion mit B2(NMe2)2Cl2. Dadurch ließen sich die monocyclischen vier N,N’-Diaryl-substituierten Diazadiborinine sowie ein Alkyl-substituiertes Diazadiborinin darstellen. Durch etablierte Methoden der Diboran(4)-Chemie wurden diese in ihre Halogenderivate (Cl, Br, I) überführt. Aus diesen konnten drei 2,3-Diazido-1,4,2,3-diazadiborinine durch Umsetzung mit TMSN3 aus den Dihalogenderivaten dargestellt werden. Diese stellen hierbei die ersten isolierten Diboran(4)azidverbindugen dar. Ebenso gelang die Synthese eines bicyclischen Naphthalinisosters, welches erneut erfolgreich in seine Halogenderivate sowie das Diazdidoderivat überführt werden konnte. Einen Einblick in den Mechanismus der 1,4,2,3-Diazadiborininbildung ermöglichte die Isolierung eines Diazadiboretidinintermediats, welches durch doppelte Salzeliminierung entsteht. Dieses erwies sich jedoch als metastabil und lagerte zum Sechsring Diazadiborinin um. Quantenchemische Berechnungen unterstutzten die experimentellen Befunde. Über Kommutierungsreaktionen konnte eine Vielzahl an B,B‘-unsymmetrisch substituierten Diazadiborininen dargestellt und isoliert werden, wobei je nach verwendeten Startmaterialien entweder Gleichgewichtsreaktionen oder quantitative Umsetzungen beobachtet wurden. Ebenso wurde die Reaktivität der neuartigen Diazidodiborane(4) gegenüber Lewis-Basen untersucht. Sowohl das monocyclische Diazadiborinin, als auch das Benzodiazadiborinin konnten mit NHC-Basen zu den fünf verschiedenen Addukten umgesetzt werden. Unter thermischer Belastung wurde bei den monocyclischen Addukten eine Staudinger-artige Reaktion beobachtet, die unter Freisetzung von N2 zur Bildung von Guanadin-substituierten Diborane(4) führte. Die Benzodiazadiborininaddukte zeigten jedoch eine gänzlich andere Reaktivität. Hier fand eine Ringverkleinerungsreaktion unter Bildung von Diazaborolen statt, welche unter Wanderung einer Azidfunktion auf das NHC-stabilisierte Boratom gebildet wurden. Auf diese Weise konnten drei 1,1-Diamino-2,2-diazidodiborane(5) isoliert werden. Während bei der Umsetzung des Naphtalenderivats mit cAAC keine selektive Reaktion beobachtet wurde, reagierte das monocyclische Diazadiborinin mit zwei Äquivalenten cAAC. Hier bedingte das erste Carbon eine Staudinger-artige Reaktion, die unter Distickstofffreisetzung zu einem Formamidin führte. Die zweite Azidgruppe wurde am $\gamma$-Stickstoffatom von einem weiteren Äquivalent cAAC koordiniert. In weiteren Reaktivitätsstudien wurde die Generierung von transienten Iminoboranen aus Diazidodiazadiborininen untersucht. Die Diazide zeigten bei Temperaturen von über 150 °C ein sehr selektives Reaktionsverhalten und gingen unter Freisetzung von Distickstoff zu 1,3,2,4-Diazadiboretidin über, wobei dies über die Dimerisierung eines intermediär gebildeten siebengliedrigen, endocyclischen Iminoborans verlief. Der Mechanismus zur Bildung der transienten Iminoborane wurde anhand zweier möglicher Bildungswege mit quantenchemischen Methoden untersucht. Im letzten Kapitel wurde die Reaktivität des Dihydrodiazadiborinins gegenüber NHC- und cAAC-Lewis-Basen untersucht. Die Umsetzung mit cAAC führte zu einer B–H-Bindungsaktivierung durch das Carbenkohlenstoffatom, die vermutlich über eine Adduktspezies verläuft. Mit dem gesättigten NHC SIMes wurde ebenfalls keine Adduktbildung beobachtet, auch wenn ein derartiges Intermediat vermutlich durchlaufen wird. Als Produkt der Umsetzung wurde indes ein bicyclisches Molekül identifiziert, welches durch doppelte Ringerweiterung gebildet wurde. Mit ungesättigten NHCs wurden drei Addukte isoliert, welche jedoch nur metastabil waren und beim Erwärmen in bicyclische Verbindungen umlagerten. Die Umlagerungsprodukte konnten weiterhin durch Koordination eines weiteren Äquivalents IMe an die B–H-Funktionalität erneut zu Addukten umgesetzt werden. Die Bildung der zweier bicyclischer Verbindungen wurde ebenfalls mit quantenchemischen Methoden untersucht, wobei ein vierstufiger Prozess durchlaufen wird. Nach der Bildung des NHC-Addukts erfolgt die Übertragung eines Hydrids auf das Carbenkohlenstoffatom. Durch Insertion eines Boratoms in die NC-Bindung des Carbenrings wird eine Spiroverbindung gebildet und im letzten Schritt folgt die Spaltung der BB-Bindung durch Insertion des ehemaligen Carbenkohlenstoffatoms, was zur Bildung der Bicyclen führt. N2 - In the present work the synthesis, functionalization and reactivity of 1,4,2,3-diazadiborinines was investigated. Initially, bis(dimethylamino)-substituted diazadiborinines with different residues on the nitrogen atoms were to be synthesized, whose further functionalization was later in focus. The synthesis was performed by reduction of 1,4-diazabutadienes with elemental lithium and subsequent salt elimination reaction with B2(NMe2)2Cl2. Thus, the monocyclic four N,N'-diaryl-substituted diazadiborinines and one alkyl-substituted diazadiborinine could be prepared. By established methods of diborane(4) chemistry, these were converted into their halogen derivatives (Cl, Br, I). From these, three 2,3-diazido-1,4,2,3-diazadiborinines could be prepared by reaction with TMSN3 from the dihalogen derivatives. These represent the first isolated diborane(4)azide compounds. The synthesis of a bicyclic naphthalene isoster was also successful, which could again be successfully converted into its halogen derivatives as well as the diazdido derivative. An insight into the mechanism of 1,4,2,3-diazadiborinine formation was gained by isolating a diazadiboretidine intermediate, which is formed by double salt elimination. However, this proved to be metastable and rearranged to the six-membered ring of diazadiborinine. Quantum chemical calculations supported the experimental findings. Via commutation reactions, a large number of B,B'-unsymmetrically substituted diazadiborinines could be represented and isolated. Depending on the starting materials used, either equilibrium reactions or quantitative conversions were observed. The reactivity of the novel diazidodiboranes(4) to Lewis bases was also investigated. Both the monocyclic diazadiborinine and the benzodiazadiborinine could be converted with NHC bases to the five different adducts. Under thermal stress a Staudinger-like reaction was observed in the monocyclic adducts, which led to the formation of guanadine-substituted diboranes(4) with the release of N2. However, the benzodiazadiborinine adducts showed a completely different reactivity. Here, a ring reduction reaction took place with formation of diazaborols, which were formed by migration of an azide function to the NHC-stabilized boron atom. In this way, three 1,1-diamino-2,2-diazidodiboranes(5) could be isolated. While no selective reaction was observed during the reaction of the naphthalene derivative with cAAC, the monocyclic diazadiborinine reacted with two equivalents of cAAC. In this case, the first carbon caused a Staudinger-like reaction, which led to the release of dinitrogen to formamidine. The second azide group was coordinated at the $\gamma$ nitrogen atom by another equivalent cAAC. In further reactivity studies the generation of transient iminoboranes from diazidodiazadiborinines was investigated. The diazides showed a highly selective reaction behavior at temperatures above 150 °C and converted to 1,3,2,4-diazadiboretidine with the release of dinitrogen. This was achieved by dimerization of an intermediately formed seven-membered endocyclic iminoborane. The mechanism for the formation of the transient iminoboranes was investigated by quantum chemical methods on the basis of two possible formation pathways. In the last chapter the reactivity of dihydrodiazadiborinine towards NHC and cAAC Lewis bases were investigated. The reaction with cAAC resulted in B-H bond activation by the carbene carbon atom, which is thought to be via an adduct species. No adduct formation was observed with the saturated NHC SIMes either, although such an intermediate is likely to be passed through. However, a bicyclic molecule formed by double ring extension was identified as the product of the reaction. Three adducts were isolated with unsaturated NHCs, but they were only metastable and rearranged into bicyclic compounds upon heating. The rearrangement products were further converted back to adducts by coordinating another equivalent IMe to the B-H functionality. The formation of the two bicyclic compounds was also investigated by quantum chemical methods, whereby a four-step process is used. After formation of the NHC adduct, a hydride is transferred to the carbene carbon atom. By insertion of a boron atom into the NC bond of the carbene ring a spiro compound is formed and in the last step the BB bond is cleaved by insertion of the former carbene carbon atom, which leads to the formation of the bicycles. KW - Heterocyclische Verbindungen KW - Chemie KW - Elementorganik KW - Diazadiborinin Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-214598 ER - TY - THES A1 - Stoy, Andreas T1 - Darstellung, Charakterisierung und Reaktivität von NHC-stabilisierten 1,2-Dihalogendiborenen T1 - Preparation, characterization and reactivity of NHC-stabilized 1,2-dihalodiborenes N2 - Im Rahmen der vorliegenden Arbeit konnte eine Reihe symmetrischer und asymmetrischer Tetrahalogendiboran(4)-Addukte realisiert werden. Die symmetrischen Brom-substituierten Vertreter 19 und 102–107 waren durch quantitativen Ligandenaustausch der schwach gebundenen Lewis-Base SMe2 von 101 zugänglich. Im Falle der IDip-stabilisierten Addukte 108 bzw. 109a/b gelang die Darstellung in sehr guten Ausbeuten durch direkte Umsetzung von freiem Carben mit den Tetrahalogendiboran(4)-Vorstufen 1 (X = Cl) bzw. 2 (X = I). Die asymme¬trischen Vertreter 113a–116b konnten durch sukzessive Adduktbildung ausgehend von 1 bzw. 6 mit cAAC und dem jeweiligen NHC bei tiefen Temperaturen (−78 °C) in moderaten bis guten Ausbeuten dargestellt werden. Nachfolgende Reduktionsversuche der asymmetrischen Addukte 113a/b und 114b–116b waren von mäßigem Erfolg geprägt. Als Reduktionsmittel wurden Alkali- bzw. Erdalkalimetalle, Interkallationsverbindungen und Übergangsmetallkomplexe eingesetzt. Zwar war in allen Fällen eine deutliche Farbänderung beobachtbar, die, zusammen mit den beobachteten Resonanzen in den 11B-NMR-Spektren, die Synthese von asymmetrischen Diborenen nahelegten, jedoch gelang die Isolierung der Diborene nicht. Hierbei gestaltete sich die Abtrennung der gebildeten Nebenprodukte als problematisch. Deutlich selektiver verliefen hingegen die Reduktionen der symmetrischen Tetrahalogen-diboran(4)-Bis(Addukte) mit NaNaph bei tiefen Temperaturen (−78 °C). Hierbei gelang es, das Portfolio der bereits bekannten Vertreter dieser Substanzklasse zu erweitern. So konnten die Brom-substituierten Diborene 126–128 erstmals vollständig charakterisiert werden. Der Einfluss der Halogenatome auf die chemischen und physikalischen Eigenschaften der Diborene wurde ferner an zwei Beispielen der IDip-stabilisierten Diborene 129 und 130 untersucht. Bei identischem NHC, aber unterschiedlichen Halogenen, konnten die Eigenschaften der Diborene 21, 129 und 130 näher untersucht und miteinander verglichen werden. Besonders deutlich werden die Redoxeigenschaften der Diborene von der Art des gebundenen Halogens beeinflusst, wie cyclovoltammetrische Untersuchungen belegen. Alle NHC-stabilisierten 1,2 Dihal¬ogen¬diborene konnten ferner anhand ihrer physikalischen Eigenschaften eingeordnet und miteinander verglichen werden. Neben der Synthese und Charakterisierung neuartiger Diborene wurden auch verschiedene Reaktivitätsstudien durchgeführt. So konnten die Diborene 21, 123, 126 und 129 mit CO2 unter milden Bedingungen umgesetzt werden, wobei verschiedene Reaktionsprodukte nachgewiesen wurden. Der initiale Schritt umfasste in allen Fällen eine [2+2]-Cycloaddition die zu den Dibora-β-Lactonen 131a–134a führte, von denen 131a und 132a vollständig charakterisiert werden konnten. Im weiteren Reaktionsverlauf wurden jedoch Isomerisierungsreaktionen von 132a–134a bei Raum¬temperatur beobachtet, wobei die 2,4 Diboraoxetan 3 one 132b–134b isoliert wurden. Bedingt durch die verhältnismäßig langsame Umsetzung von 21 zu 132a konnte die [2+2] Cyclo¬addition mittels 1H-VT-NMR-Spektroskopie verfolgt werden, wobei die Rückgrat¬protonen der NHCs als selektive Sonde dienten. Eine bemerkenswert hohe Stabilität konnte für 131a bei Raumtemperatur beobachtet werden, bei der keine Anzeichen einer Umlagerung nachweisbar waren. Die angefertigten quantenchemischen Untersuchungen zum Reaktions¬mechanismus legen eine höhere Energiebarriere des Schlüsselschrittes der Umlagerungs¬reaktion für 131a als für 132a nahe, womit die Stabilität von 131a erklärbar ist. Ferner konnten beim Erhitzen von 131a für 16 Stunden auf 60 °C kurzlebige Intermediate in Form eines Oxoborans und Borylens, die im Laufe der Isomerisierungsreaktion der Dibora-β-Lactonen zu den 2,4 Diboraoxetan 3 onen auftreten, 11B NMR-spektroskopisch nachgewiesen werden. Hierdurch wurde ein weiteres Indiz gewonnen, dass die Richtigkeit des postulierten Reaktionsmechanimus verdeutlicht. Die reduzierende Wirkung der Diborene konnte mit der Darstellung von Radikalkationen demonstriert werden. Hierbei erfolgte die Umsetzung der Diborene 21, 123–126 und 128 mit [C7H7][BArF4] zu 138–143 in guten bis sehr guten Ausbeuten. Die gebildeten Radikale konnten vollständig charakterisiert werden und sind wegen ihrer Eigen¬schaften gut mit bereits literaturbekannten Vertretern dieser Substanzklasse vergleichbar. Versuche die Radikalkationen durch Umsetzung der Diborene mit [C7H7][BF4] darzustellen scheiterten an der Zersetzung während der Aufarbeitung, wodurch die Wichtigkeit des schwach koordinierenden Anions verdeutlich wird. Entgegen der Erwartungen wurden beim Vergleich der ESR-Spektren der dargestellten Radikalkationen mit bekannten Analoga deutlich unterschiedliche giso-Werte ermittelt, die auf den starken Einfluss der Bromatome zurückzuführen sind. Des Weiteren war es möglich, eine Korrelation zwischen den Strukturparametern in der Festphase und den UV/Vis-Absorptionsmaxima in Lösung nachzuweisen, wonach für diejenigen Radikale die stärkste Blauverschiebung beobachtet wurde, die den größten Diederwinkel α, zwischen den B2Br2-Ebenen und den CN2C2-Carben-ebenen, aufwiesen. In weiteren Studien wurden die Redoxeigenschaften der Diborene durch Umsetzung von 21 und 123–125 mit elementaren Chalkogenen unter milden Reaktionsbedingungen untersucht. So konnten durch Umsetzung der Diborene mit elementarem Schwefel die Diborathiirane 144–147 in moderaten bis guten Ausbeuten erhalten werden. Trotz eines großen Überschusses an Schwefel wurde aber keine vollständige BB-Bindungsspaltung beobachtet. Auf analoge Weise wurden die Diboraselenirane 148, 150 und 151 durch Umsetzung mit rotem Selen in moderaten bis guten Ausbeuten synthetisiert. Deutliche Unterschiede zeigten sich aber beim IDep-stabilisierten Diboren 123, das ein radikalisches Seleniran ausbildete. Überschüs¬siges Selen begünstigt vermutlich eine Folgeoxidation des in situ gebildeten Diboraselenirans, die jedoch für die anderen Verbindungen dieser Substanzklasse nicht beobachtbar war. Interessanterweise wurde bei allen Dipp-substituierten Verbindungen (Diborathiirane 144 und 146 sowie Dibora¬selenirane 148 und 151) das Fehlen einer Dipp-Gruppe der stabilisierten NHC-Basen im 1H NMR-Spektrum nachgewiesen. Dieser Umstand konnte durch eine eingeschränkte Rotation um die BC-Bindungsachse mittels 1H-VT-NMR-Spektrum aufgeklärt werden, wobei die Rotationsbarriere exemplarisch für 144 13.9 ± 1 kcal/mol beträgt. Eine bemerkenswerte Reaktivität der 1,2-Dibromdiborene 21 und 123–126 wurde gegenüber hetero¬aroma¬tischer Stickstoffbasen beobachtet. Mit einem großen Überschuss an Pyridin konnte ein Bromidanion aus den Diborenen verdrängt werden, wodurch die Diborenkationen 154–158 in moderaten bis guten Ausbeuten erhalten wurden. Die Abtrennung der dabei unvermeidlich gebildeten NHC-Salze gestaltete sich als schwierig, allerdings gelang es, nach einer in situ Deprotonierung mit NaHMDS die freien NHCs zu entfernen. Versuche der Deri-vatisierung mit anderen aromatischen Basen wie 2- bzw. 4-Picolin, Chinolin oder 2,2’-und 4,4’-Bipyridin scheiterten. Erfolgreich konnte DMAP eingesetzt werden, wodurch es möglich war, die Diborenkationen 160–162 in guten bis sehr guten Ausbeuten zu erhalten. Interessanterweise zeigen 154–158 teils deutliche solvatochrome Absorptions¬eigenschaften in den UV/Vis-Spektren. Im Laufe der Umsetzung von 125 mit Pyridin konnte durch angepasste Reaktions¬bedingungen das Dikation 159 in moderaten Ausbeuten isoliert werden. Dessen bemerkenswerte Stabilität zeigte sich durch eine ausgeprägte Widerstands¬fähigkeit gegenüber Sauerstoff und Luftfeuchtigkeit über mehrere Wochen. Weiterführende Unter¬suchungen der Festkörperstruktur von 159 zeigen Bindungsparameter, die trotz der ionischen Natur der Verbindung, nur geringfügig von denen des neutralen Diborens 125 abweichen. Mittels Raman-Spektroskopie konnten des Weiteren die BB-Bindungsstärke in 159 näher bestimmt werden, die mit einer Kraftkonstante von 470 N/m nahezu identisch zu der des neutralen Dibores (465 N/m) ist, was Rückschlüsse auf die Lokalisierung der positiven Ladungen auf den Pyridinringen zulässt. Aus diesem Grund kann Verbindung 159 als bis dato einziges Beispiel eines luft- und feuchtigkeitsstabilen Diborens bezeichnet werden. N2 - Within the scope of this work, a series of symmetrical and unsymmetrical tetrahalodiborane(4) adducts were synthesized. The symmetrical, bromine-substituted compounds 19 and 102–107 were accessible by quantitative ligand exchange of the weakly-bound Lewis base SMe2 in 101. The IDip-stabilized adducts 108 and 109a/b, were prepared in excellent yields by direct addition of free carbene to the tetrahalodiborane(4) precursors 1 (X = Cl), and 2 (X = I), and respectively, the unsymmetrical adducts 113a–116b could be prepared in moderate to good yields by stepwise addition of cAAC and the corresponding NHC to 1 or 6 at low temperatures (−78 °C). Subsequent attempts to reduce the asymmetric adducts 113a/b and 114b–116b with reagents such as alkali, or alkaline earth metals, intercalation compounds, and transition metal complexes were moderately successful. Although a change in colour was observed in all cases, which, together with the observed resonances in the 11B-NMR spectra, suggested the synthesis of unsymmetrical diborenes, their isolation was unsuccessful. Here, the separation of the byproducts proved to be problematic. In contrast, the reductions of the symmetrical tetrahalodiborane(4) bis(adducts) with NaNaph at low temperatures (−78 °C) were much more selective. Here, we succeeded in expanding the scope of known representatives of this substance class. Thus, the bromine-substituted diborenes 126–128 could be fully characterized for the first time. The influence of the halides on the chemical and physical properties of the diborenes were further investigated using two examples of IDip-stabilized diborenes 129 and 130. The properties of 21, 129 and 130, which represent diborenes with identical NHCs but different halides, were studied in more detail and compared with each other. The redox properties of the diborenes are particularly influenced by the nature of the halide, as emphasized by cyclo¬voltammetric studies. All NHC-stabilized 1,2-dihalodiborenes were also classified and compared with each other based on their physical properties. In addition to the synthesis and characterization of novel diborenes, a range of reactivity studies were also performed. For example, when diborenes 21, 123, 126, and 129 were reacted with CO2 under mild conditions, a variety of products were obtained. In all cases the initial step involved a [2+2] cycloaddition leading to the dibora-β-lactones 131a–134a, of which 131a and 132a were fully characterized. However, in the further course of the reaction, isomerization of 132a–134a took place, leading to the formation of the 2,4-diboraoxetane-3-ones 132b–134b. Thanks to the relatively slow conversion of 21 to 132a, the [2+2] cycloaddition could be monitored by variable-temperature 1H-NMR spectroscopy, with the backbone protons of the NHCs serving as viable probes. A remarkably high stability at room temperature was observed for 131a with no evidence of rearrangement. Quantum chemical studies of the reaction mechanism suggested a higher energy barrier for the key step of the rearrangement reaction for 131a relative to that of 132a. Furthermore, heating of 131a to 60 °C for 16 h led to the formation of short-lived intermediates in the form of an oxoborane and borylene, which occur in the course of the isomerization reaction of the dibora-β-lactones to the 2,4-diboraoxetane-3-one, and were detected by 11B-NMR spectroscopy. This provided a further indication that the postulated reaction mechanism is correct. The reducing properties of the diborenes were demonstrated by the preparation of the radical cations. Here, diborenes 21, 123–126, and 128 reacted with [C7H7][BArF4] to form 138–143 in good to excellent yields. The isolated radicals were fully characterized, and their properties are readily comparable with previously-reported representatives of this substance class. Attempts to prepare the radical cations by reacting diborenes with [C7H7][BF4] were accompanied by decomposition during workup, thus highlighting the importance of the weakly coordinating anion. Contrary to expectations, significantly different giso values were obtained when comparing the EPR spectra of the presented radical cations with known analogues, which could be attributed to the strong influence of the bromide atoms. Furthermore, it was possible to find a correlation between the structural parameters in the solid state and the UV/Vis absorption maxima in solution. The strongest blue shift was observed for those radicals that exhibited the largest dihedral angle α between the B2Br2 plane and the CN2C2-carbene planes. In further studies, the redox properties of diborenes were investigated by reacting 21 and 123–125 with elemental chalcogens under mild reaction conditions. This way, reaction of diborenes with elemental sulphur led to the formation of diborathiiranes 144–147 in moderate to good yields. Despite a large excess of sulphur, complete BB bond cleavage was not observed for any of these products. Analogously, diboraseleniranes 148, 150, and 151 were synthesized by reaction with red selenium in moderate to good yields. However, apparent differences were seen for the IDep-stabilized diborene 123, which in contrast to 21, 124 and 125 formed a radical diboraselenirane. Excess selenium presumably favors a subsequent oxidation of the in-situ-formed diboraselenirane, which however, was not observed for the other compounds of this substance class. Interestingly, one Dipp-group of the stabilizing NHC bases was not detected in the proton NMR spectrum for all Dipp-substituted compounds (diborathiiranes 144 and 146, and also diboraseleniranes 148 and 151). This circumstance could be explained by an inhibited rotation around the BC axis as verified by means of variable-temperature 1H-NMR spectroscopy, the rotation barrier exemplified by that of 144, which was found to be 13.9 ± 1 kcal/mol. A remarkable reactivity of 1,2-dibromodiborenes 21 and 123–126 was observed towards hetero¬aromatic nitrogen bases. With a large excess of pyridine, a bromide anion could be displaced, giving the diborene cations 154–158 in moderate to good yields. Separation of the NHC salts inevitably formed during this process proved to be difficult, but after in situ deprotonation with NaHMDS, it was possible to remove the free NHCs due to their substantially different solubilities. Attempts at derivatization with other aromatic bases such as 2- or 4-picoline, quinolone, or 2,2'-and 4,4'-bipyridine failed. However, addition of DMAP le to a successful halide substitution, making it possible to obtain the diborene cations 160–162 in good to excellent yields. Interestingly, 154–158 furthermore show partly distinct solvatochromic absorption properties in their UV/Vis spectra. In the course of the reaction of 125 with pyridine, the dication 159 was isolated in moderate yields by employing adjusted reaction conditions. Its remarkable stability was demonstrated by a pronounced resistance to oxygen and atmospheric humidity over a period of several weeks. Further studies of the solid-state structure of 159 show binding parameters that deviate only slightly from those of the neutral diborene 125, despite the ionic nature of the compound. Furthermore, by use of Raman spectroscopy, it was possible to determine the BB bond strength in 159 in more detail, which, with a force constant of 470 N/m, is almost identical to that of the neutral diborene (465 N/m). This result allows us to draw conclusions about the localization of the positive charges on the pyridine rings. For this reason, compound 159 represents a rare example of an air- and moisture-stable diborene. KW - Bor KW - Mehrfachbindung KW - Synthese KW - Eigenschaften KW - Reaktivität KW - Diboren KW - Carben Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-237818 ER - TY - THES A1 - Siedler, Eva T1 - Reaktivitätsstudien an terminalen Alkylborylenkomplexen T1 - Studies on the reactivity of terminal alkyl borylene complexes N2 - Im Rahmen der Dissertation wurde die Reaktivitat des terminalen Mangan-Borylenkomplexes gegenüber verschiedenen polaren Doppelbindungssystemen, koordinativ ungesattigten Übergangsmetallfragmenten sowie Lewis-Basen untersucht. Mithilfe der spektroskopischen und strukturellen Daten der dabei synthetisierten Verbindungen konnten neue Erkenntnisse uber die Natur der Metall-Bor-Bindung erlangt werden. N2 - This work aims to investigate the reactivity of a terminal manganese borylene complex towards a range of polar unsaturated substrates as well as transition metal complexes and Lewis bases. Thereby, discussion of the spectroscopical and structural data of the prepared compounds helps to determine the nature of the metal-boron bond. KW - Borylene KW - Übergangsmetallborylen, Borylentransfer, Basenstabilisiertes Borylen, Metathese KW - Reaktivität Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93882 ER - TY - THES A1 - Sieck, Carolin T1 - Synthesis and Photophysical Properties of Luminescent Rhodacyclopentadienes and Rhodium 2,2'-Biphenyl Complexes T1 - Synthese und photophysikalische Eigenschaften von lumineszierenden Rhodacyclopentadienen und Rhodium 2,2'-Biphenyl Komplexen N2 - The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment. Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes. In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies. In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors. Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before. As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane. Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes. On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature). With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure  and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster. In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields. Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands. Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work. Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed. Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes. Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided. The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct). CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase. N2 - Die photochemischen und photophysialischen Eigenschaften von Übergangsmetall-komplexen sind von großem Interesse, da solche Materialien für eine Vielzahl von Anwendungen, zum Beispiel in der Photokatalyse, für Sensing und Imaging, als Multiphotonenabsorptionsmaterialien und in der Herstellung von OLEDs genutzt werden können. Ein grundlegendes Verständnis des angeregten Zustands von Übergangsmetallverbindungen ist daher für die Entwicklung neuer Materialen für die oben genannten Anwendungen maßgeblich. Grundsätzlich können die Lumineszenzeigenschaften dieser Klasse von Verbindungen einerseits durch das Metall selbst, oder andererseits durch subtile Modifikation der Ligandensphäre beeinflusst werden. Darüber hinaus spielen Übergangsmetallkomplexe weiterhin eine wichtige Rolle in der modernen Synthesechemie. Insbesondere können Bindungen selektiv geknüpft werden, die in der klassischen organischen Chemie nur schwer zugänglich oder nicht realisierbar sind. So ermöglichen sie beispielsweise die effiziente und selektive Knüpfung von Kohlenstoff-Kohlenstoff-Bindungen. Ein bekanntes Beispiel für solch eine Bindungsknüpfung sind metallkatalysierte Ringschlussreaktionen. Hierbei spielen Metallacyclopentadien-Komplexe als Zwischenstufen bei metallvermittelten oder katalysierten Ringschlussreaktionen, wie beispielsweise der [2+2+2] Cyclotrimerisierung von Alkinen, eine Schlüsselrolle. Die jüngsten Forschungen konzentrierten sich auf die Synthese und Charakterisierung dieser metallacyclischen Zwischenprodukte, auch MC4-Ringsysteme genannt, welche strukturell mit Hauptgruppen-EC4-Systemen wie Borolen, Silolen, Thiophenen und Phospholen verwandt sind. Insgesamt ist diese Gruppe von Verbindungen (EC4-Analoga) wohlbekannt und hat aufgrund ihrer Elektronentransport- und optischen Eigenschaften beträchtliche Aufmerksamkeit erregt. Im Gegensatz zu Übergangsmetallanaloga zeigen Hauptgruppen-EC4-Systeme jedoch keine Phosphoreszenz, was auf eine ineffiziente Spin-Bahn-Kopplung zurückzuführen ist. Im Vergleich dazu zeigen Übergangsmetalle der fünften und sechsten Periode Phosphoreszenz, weshalb es von großem Interesse ist, die Lumineszenzeigenschaften der Metallacyclopentadiene näher zu untersuchen. Im Jahr 2001 entwickelte Marder et al. eine Eintopfsynthese von lumineszierenden 2,5 Bis(arylethinyl)rhodacyclopentadienen durch reduktive Kupplung von 1,4 Diarylbuta 1,3 diinen an einer geeigneten Rhodium(I)-Vorstufe. In den vergangenen Jahren wurden eine Vielzahl von Liganden (z.B. TMSA, S,S'-Diethyldithiocarbamat, usw.) und Substarten (1,4-Bis(p-R-phenyl)-1,3-butadiine oder verknüpfte ,-Bis(p-R-arylethinyl)alkane (R = Elektronen-ziehende oder schiebende Gruppen)) untersucht, wobei stets eine selektive Reaktion zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen beobachtet werden konnte. Trotz des Zentralatoms Rhodium wurde ausschließlich Fluoreszenz beobachtet. Um den Einfluss der Ligandensphäre um das Rhodiumatom auf die Interkombination (Intersystem-Crossing Prozesse, ISC) in diesen fluoreszierenden Rhodacyclopentadienen zu untersuchen und den Metallcharakter in den Grenzorbitalen durch Destabilisierung der Rhodium-d-Orbitale zu erhöhen, wurde Acetylacetonat (acac), ein  Elektronen-schiebender Ligand, eingeführt. Interessanterweise beobachtete Tay im Jahr 2010 durch Reaktion von , Bis(p R arylbutadiinyl)alkanen mit [Rh(κ2-O,O-acac)(PMe3)2] nicht nur die fluoreszierenden 2,5-Bis(arylethinyl)-rhodacyclopentadiene, sondern auch einen isomeren Rhodium 2,2' Biphenyl Komplex, der in ersten photophysikalischen Studien Phosphoreszenz zeigte. In dieser Arbeit wurden das Reaktionsverhalten und die Reaktionsbedingungen von [Rh(κ2 O,O acac)(L)2] (L = PMe3, P(p-tolyl)3) mit verschiedenen , Bis(p R-arylbutadiinyl)alkanen untersucht. Weiterhin wurde die Trennung der beiden Isomere 2,5-Bis(arylethinyl)rhodacyclopentadien (A) und Rhodium-2,2'-bph-Komplex (B) optimiert und die photophysikalischen Eigenschaften der beiden Isomere untersucht. Die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen führt selektiv zum 2,5-Bis(arylethinyl)rhodacyclopentadien-Isomer A, welches nur schwach fluoresziert. Wird jedoch der Phosphanligand P(p-tolyl3) mit PMe3 ersetzt, führt die Reaktion von [Rh(κ2 O,O acac)(PMe3)2] und ,-Bis(arylbutadiinyl)alkanen zu zwei verschiedenen Isomeren von MC4-Metallacyclen mit grundverschiedenen photophysikalischen Eigenschaften. 2,5 Bis(arylethinyl)rhodacyclopentadiene (A) werden durch eine reduktive [2+2]-Kopplung an Rhodium gebildet und weisen eine intensive Fluoreszenz auf. Das zweite Isomer waren Rhodium-2,2'-bph-Komplexe (B), die Phosphoreszenz zeigen. Dies rührt von einer ungewöhnlichen [4+2]-Cycloadditionsreaktion und einer nachfolgenden  H Verschiebung her. Die Kontrolle des Isomeren-Verhältnisses von 2,5-Bis(arylethinyl)rhodacyclopentadienen (A) und Rhodium-2,2'-bph-Komplexen (B) erfolgt durch Modifizierung der Alkankette des verknüpften ,-Bis(arylbutadiinyl)alkans. Die Veränderung der Ligandenbrücke von vier zu drei CH2-Gruppen begünstigt die Bildung des Rhodium-Biphenyl-Isomers B drastisch und bietet einen grundsätzlich neuen Weg, um Zugang zu photoaktiven Biphenyl-Metallverbindungen in guten Ausbeuten zu erhalten. Die photophysikalischen Eigenschaften sind bisher nur von einer begrenzten Anzahl an Biphenyl-Komplexen von Iridium, Palladium und Platin untersucht worden, wobei die geringe Menge an Beispielen vermutlich auf limitierte Synthesestrategien von verschieden-substituierten 2,2'-bph Übergangsmetall-komplexen zurückzuführen ist. Da die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen selektiv zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen mit P(p-tolyl3) als Phosphanliganden führt, und um die zeitaufwendige Trennung der Isomere zu vermeiden, wurde eine neue Synthesestrategie für 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexe mit PMe3 als Phosphanliganden entwickelt. Die relativ schwache Rhodium-P(p tolyl)3 Bindung von 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexen ermöglicht Liganden-Austauschreaktionen. Durch Zugabe von PMe3 im Überschuss bei Raumtemperatur wurde eine schrittweise Reaktion beobachtet, wobei zuerst die monosubstituierte Phosphan Rhodacyclopentadien-Zwischenstufe und anschließend durch Erwärmung vollständige Umsetzung und somit der zweifach PMe3 substituierte 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplex erhalten werden konnte. Die isolierten 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexe A (mit PMe3 als Phosphanliganden) und Rhodium-2,2'-bph-Komplexe B wurden auf ihre photophysikalischen Eigenschaften hin untersucht. Isomer A ist stark fluoreszierend mit hohen Quantenausbeuten von bis zu 54% und sehr kurzen Lebenszeiten (τ = 0,2  2,5 ns) in Lösung bei Raumtemperatur. Sogar bei 77 K in Glasmatrizen wird keine Phosphoreszenz beobachtet, was im Einklang mit früheren Beobachtungen von Steffen et al. ist, die zeigten, dass Spin-Bahn-Kopplung (SOC) durch das Schwermetallatom in 2,5-Bis(arylethinyl)rhodacyclopentadienen und 2,5 Bis(arylethinyl)iridacyclopentadienen vernachlässigbar ist. Der Ursprung dieser Fluoreszenz liegt in der reinen Intra-Ligand-Natur der angeregten Zustände S1 und T1. Das HOMO und das LUMO sind fast reine - und *-Ligandenorbitale und das HOMO ist energetisch gut von den gefüllten d-Orbitalen des Rhodiums getrennt. Die Abwesenheit von Phosphoreszenz in Übergangsmetallkomplexen ist aufgrund des dominierenden IL-Charakters der angeregten Zustände bei schwereren Homologen, im Vergleich zu Rhodium, und somit größeren Spin Bahn Kopplungskonstanten nicht ungewöhnlich, auch wenn ISC von S1→Tn ausreichend effizient ist, um Triplett-Zustände zu erreichen. Allerdings gibt es im Vergleich zu unseren Rhodacyclopentadienen sehr wenige Komplexe, die Fluoreszenz mit der Effizienz und mit diesen außergewöhnlich langsamen Intersystem-Crossing Prozessen im Nanosekundenbereich anstatt von einigen Pikosekunden oder schneller besitzen. Im Gegensatz dazu sind die Rhodium-2,2'-bph-Komplexe B ausschließlich phosphoreszierend, wie es für Übergangsmetallkomplexe erwartet wird. Sie zeigen bei langen Lebenszeiten (Hunderte von s) Phosphoreszenz-Quantenausbeuten von bis zu 33% bei Raumtemperatur in Lösung. Da auch bei niedriger Temperatur keine Fluoreszenz festgestellt wird, kann davon ausgegangen werden, dass S1→Tn-ISC schneller als Fluoreszenz und strahlungslose Relaxation aus dem S1-Zustand sein muss. Dies ist jedoch gegenläufig zum Verhalten der isomeren 2,5 Bis(arylethinyl)rhodacyclopentadiene, für die ein ungewöhnlich langsames ISC auf der Zeitskala auftritt, die mit Fluoreszenz konkurrenzfähig ist (siehe oben). Die sehr kleinen Werte für die Strahlungsgeschwindigkeitskonstanten weisen jedoch darauf hin, dass der T1-Zustand reinen 3IL-Charakter mit schwacher Spin-Bahn-Kopplung vom Rhodiumatom ausgehend besitzt. Die Phosphoreszenz-Effizienz dieser Komplexe in Lösung bei Raumtemperatur ist noch beeindruckender, da die nicht-strahlende Kopplung des angeregten Zustands mit dem Grundzustand typischerweise die Phosphoreszenz hemmt. Stattdessen erlaubt die Rigidität des organischen -Systems, dass der ligandenbasierte angeregte Triplettzustand für mehrere hundert s stabil vorliegt und einen effizienten strahlenden Übergang in den Grundzustand vollzieht. Die außergewöhnlich langen Lebensdauern und kleinen Strahlungsgeschwindigkeitskonstanten der Rhodium-2,2'-bph-Komplexe sind vermutlich ein Ergebnis des hochkonjugierten -Systems des organischen Liganden. Laut unseren TD-DFT-Studien wird die Elektronendichte durch Ladungstransfer vom Rhodiumatom auf die Arylethinylreste übertragen und verringert somit die Spin-Bahn-Kopplung des Metallzentrums, die für eine kurze Phosphoreszenzlebenszeit erforderlich wäre. Diese Ergebnisse zeigen, dass der π-chromophore Ligand maßgeblich Einfluss auf den angeregten Zustand hat, dass auch schwere Übergangsmetallkomplexe wie Rhodium fluoreszieren können, wie es eigentlich nur von Hauptgruppenanaloga bekannt ist. Aufgrund der erhaltenen Ergebnisse und im Hinblick auf die Modifikation der optischen Eigenschaften und darüber hinaus das Reaktionsverhalten dieser Rhodiumkomplexe zu erforschen, wurde der Einfluss der Ligandensphäre um das Rhodiumatom untersucht. In Anbetracht dessen, dass die P(p-tolyl)3-Liganden leicht durch die stärker -donierenden PMe3 Liganden er-setzt werden können, wurden Ligandenaustausch-reaktionen mit N heterocyclischen Carbenen (NHCs) als noch stärkere -Donoren unter-sucht. Die Addition von zwei Äqui-valenten NHC führt bei Raumtemperatur zur Substitution von nur einem Äquivalent P(p-tolyl3) und somit zur Bildung des monosubstituierten NHC Rhodiumkomplexes. Die Reaktion des isolierten Mono-NHC-Komplexes mit einem weiteren Äquivalent NHC bei Raumtemperatur führte jedoch auch nicht zum gewünschten Austausch des zweiten Phosphanliganden. Erhöhung der Reaktionstemperatur auf 60 °C resultiert in der Bildung des tetra-substituierten NHC-Rhodiumkomplexes [Rh(nPr2Im)4]+[acac]-. Um zweifach NHC-substituierte 2,5 Bis(arylethinyl)-rhodacyclopentadiene zu erhalten, wurde eine neue Syntheseroute entwickelt. Durch Reaktion des Bis-NHC-Komplexes [Rh(κ2 O,O acac)(nPr2Im)2] mit , Bis(arylbutadiinyl)alkanen bei Raumtemperatur konnten 2,5 Bis(arylethinyl)rhodacyclopentadiene mit NHC-Liganden in cis- und trans-Stellung zueinander erhalten werden und durch NMR-spektroskopische Messungen und Einkristallröntgenbeugungsanalyse identifiziert werden. Die Isolierung und volle Charakterisierung sowie eine fundamentale photophysikalische Studie konnten im Rahmen dieser Arbeit aus Zeitgründen nicht beendet werden. Weiterhin wurden die optischen Eigenschaften und das Reaktionsverhalten von Rhodiumkomplexen mit einem verkürzten konjugierten -System des chromophoren Liganden untersucht. Hierbei werden zur Synthese anstatt Tetrainen, Diine eingesetzt. Die Umsetzung von [Rh(κ2-O,O-acac)(PMe3)2] mit 1,7-Diaryl-1,6-heptadiinen führt zur selektiven Bildung von 2,5 Bis(aryl)rhodacyclopentadienen. Diese Verbindungen sind jedoch nur sehr schwach fluoreszierend, was sich in Quantenausbeuten ФPL < 1% und sehr kurzen Emissionslebenszeiten in Toluol bei Raumtemperatur zeigt. Vermutlich führt Schwingung und Rotation des Bis(phenyl)butadien-Grundgerüsts vermehrt zu strahlungsloser Relaxation in den Grundzustand und ist somit für die geringeren Quantenausbeuten im Vergleich zu PMe3-Komplexen mit dem Bis(phenylethinyl)butadien-Grundgerüst verantwortlich. Phosphoreszenz konnte auch bei Tieftemperaturmessungen bei 77 K in der Glasmatrix nicht beobachtet werden. Die Reaktionen von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit 1,7-Diaryl-1,6-heptadiinen führten jedoch zu einer metallvermittelten oder -katalysierten Cycloadditionsreaktion von Alkinen und zur Bildung von Dimerisierungs- und Trimerisierungsprodukten. Arylphosphan-Liganden (P(Ar)3 (Ar = Aryl)) gelten als schwächere -Donorliganden und haben daher eine höhere Tendenz zur Dissoziation. Hiermit lässt sich erklären, dass Rhodium(I)-Komplexe mit Arylphosphan-Liganden eine zunehmende Tendenz haben, katalytische Reaktionen einzugehen, während die stärkeren -Donor-Liganden (PMe3 oder NHCs) die Bildung stabiler Rhodiumkomplexe begünstigen. In Kapitel 4 werden die Ergebnisse der Untersuchung von NHCs und cyclischen (Alkyl)(amino)carbenen (CAACs) präsentiert. Diese Verbindungen besitzen einzigartige elektronische und sterische Eigenschaften und sind daher als Liganden für Katalysatoren in organokatalytischen Reaktionen von großem Interesse. In dieser Arbeit werden Studien von Substitutionsreaktionen an neuartigen Carbonylkomplexen von Rhodium und Nickel vorgestellt. Zur Charakterisierung und zur Einordnung von CAACmethyl wird mit der großen Menge an Daten, die für NHCs und sterisch- anspruchsvollere CAAC-Liganden zur Verfügung stehen, ein Überblick über physikochemische Parameter (Elektronik, Sterik und Bindungsstärke) gegeben. Die Reaktion von [Rh(-Cl)(CO)2]2 mit zwei Äquivalenten CAACmethyl führte bei tiefer Temperatur zur Bildung des mononuklearen Komplexes cis-[(RhCl(CO)2(CAACmethyl)]. Bei Raumtemperatur jedoch bildeten sich durch Reaktion von [Rh(-Cl)(CO)2]2 mit CAACmethyl der mononukleare Komplex [(RhCl(CO)(CAACmethyl)2], die chlorverbrückten Komplexe [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 und ein Kohlenmonoxid-Aktivierungsprodukt. Das Kohlenmonoxid-Aktivierungsprodukt wird vermutlich durch Reaktion von zwei Äquivalenten des CAACs mit CO und anschließender Umlagerung durch Migration der Dipp-Gruppe gebildet. Während klassische N-heterocyclische Carbene nicht elektrophil genug sind, um mit CO zu reagieren, gehen verwandte Diamidocarbene und (Alkyl)(amino)carbene Additionsreaktionen mit CO ein. Für die selektive Synthese des CAAC-disubstituierten mononuklearen Komplexes wurden acht Äquivalente CAACmethyl mit einem Äquivalent [Rh(-Cl)(CO)2]2 umgesetzt. Für die Auswertung von TEP-Werten wurde [Ni(CO)3(CAAC)] in Zusammenarbeit mit der Gruppe um Radius synthetisiert. Durch Isolierung der Komplexe [(RhCl(CO)(CAACmethyl)2] und [Ni(CO)3(CAAC)] war es weiterhin möglich, die elektronischen und ster-ischen Parameter von CAACmethyl zu untersuchen. Genau wie die sterisch anspruchsvolleren Ver-bindungen CAACmenthyl und CAACcy, ist das Methyl substituierte CAAC im Vergleich zu üblichen NHCs ein besonders starker -Donor. Während dieser einen sehr ähnlichen TEP-Wert von 2046 cm-1 aufweist, besitzt er zusätzlich ausgezeichnete -Akzeptor-Eigenschaften (P = 67,2 ppm Phosphinidenaddukt). Durch das tiefliegende LUMO und das kleine HOMO-LUMO-Gap sind CAACs sehr effektiv für die Isolierung einer Vielzahl von ansonsten instabilen diamagnetischen und paramagnetischen Spezies von Hauptgruppen- und Übergangs-metallverbindngen. Die elektronischen Eigenschaften erlauben auch freien CAACs, kleine Moleküle mit starken Bindungen zu aktivieren. Eine neuere Entwicklung ist die Verwendung von CAACs als Liganden in Übergangsmetall-komplexen, die bisher nur als kurzlebige katalytische Zwischenstufen postuliert wurden.[271,324] Die Isolierung dieser reaktiven Spezies ermöglicht ein besseres Verständnis für bereits bekannte katalytische Reaktionen, sowie die Entwicklung neuer Katalysatoren und Anwendungen. Sol entwickelte Radius et al.[300] zum Beispiel einen CAAC-Komplex aus Kobalt als Vorläufer für die Dünnfilmabscheidung von Werkstoffen und Steffen et al.[326] berichtete von CAAC-Kupfer-Komplexen mit sehr hohen Photolumineszenz-Quantenausbeuten, die in LED Geräten eingesetzt werden könnten. Mit der Entwicklung von günstigen und flexiblen Synthesemethoden für die Herstellung von CAACs und deren entsprechenden Übergangsmetallkomplexen sowie der Kenntnis ihrer elektronischen Eigenschaften scheint es sicher, dass Anwendungen rund um dieses Ligandensystem weiter zunehmen werden. KW - Fluorescence KW - Phosphorescence KW - Rhodium KW - Sonogashira coupling KW - Carbenes KW - Übergangsmetallkomplexe KW - Rhodium KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154844 ER - TY - THES A1 - Seufert, Jens T1 - Synthese und Reduktionsverhalten neuer Lewis-Basen-Addukte des Bors sowie Redox-aktiver Ligandentransfer durch Silylene T1 - Synthesis and reduction of novel Lewis-base adducts of boron and redox-active Ligand Transfer through silylenes N2 - Im Rahmen dieser Arbeit war es möglich, diverse Lewis-Basen für deren Einsatz zur Stabilisierung niedervalenter Borverbindungen zu testen. Dabei wurden neuartige Mono- und Diboran(4)-Addukte mit mesoionischen Carbenen, Phosphanen und Alkyl-verbrückten Carbenen synthetisiert, charakterisiert und deren Reduktionsverhalten getestet. Des Weiteren konnte gezeigt werden, dass elektronenreiche Bis(amidinato)- und Bis(guanidinato)silylene eine diverse Vielfalt an Reaktionstypen induzieren und dabei zu Redox-Reaktionen und Ligandenübertrag neigen. N2 - Within the scope of this work, a variety of Lewis-bases were tested for their capability to stabilize low-valent boron compounds. Thereby, novel adducts of mono- and diboranes with mesoionic carbenes, phosphines and alkyl-bridged carbenes were synthesized, characterized and their reduction behavior was tested. Furthermore, it was shown that electron-rich bis(amidinato)- and bis(guanidinato)silylenes induce a range of interesting reactions and are prone to ligand transfer as well as redox reactions. KW - Bor KW - Reaktivität KW - Silylen KW - Carbene KW - Ligandentransfer KW - verbrückende Carbene KW - mesoionische Carbene Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173987 ER - TY - THES A1 - Schäfer, Marius T1 - Darstellung und Reaktivität von Iminoboranen sowie deren Einsatz bei der Synthese von Azaborininen T1 - Synthesis and Reactivity of Iminoboranes and their Usage in the Synthesis of Azaborinines N2 - Die Dissertation befasst sich mit der Darstellung von Iminoboranen sowie deren Verwendung bei der Rhodium-vermittelten Synthese von Azaborininen. N2 - The first examples of adducts of cyclic alkyl(amino) carbenes (cAACs) and N-heterocyclic carbenes (NHCs) with iminoboranes have been synthesized and fully characterized. Furthermore new synthetic route to functionalized 1,2 and 1,4-azaborinines has been developed utilizing a [2+2]/[2+4] cycloaddition reaction of di-tert-butyliminoborane and the unsymmetric (tert-butylimino)mesityborane with a series of alkynes in presence of the rhodium complex [{RhCl(PiPr3)2}]2. KW - Iminoborane KW - Azaborinine Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136959 ER - TY - THES A1 - Schuster, Julia Katharina T1 - Lewis-Basen-Stabilisierte Mono- und Dinukleare Verbindungen des Galliums und Niedervalente Verbindungen des Berylliums - Darstellung und Reaktivitätsstudien T1 - Lewis-Base-Stabilized Mono- and Dinuclear Gallium Compounds and Low-Valent Beryllium Compounds - Synthesis Reactivity Studies N2 - The present work is divided into two parts, the first of which is concerned with the synthesis and reactivity of carbene-stabilized gallium compounds. The second part of this thesis adresses the synthesis of novel, beryllium-containing compounds, whereby, in addition to investigations into new structural motifs of linear, sp-hybridized beryllium compounds, the stabilization of low valent beryllium complexes by the use of carbene ligands is a central part of this thesis. 1 Lewis-base-stabilized gallium compounds In this chapter, two different synthetic routes towards carbene stabilized, low-valent gallium compounds were investigated. By the use of CAAC ligands, four different [GaCl3(RCAAC)]-species (R = Me, Cy, Et, Menth) were realized, and investigated in terms of their reactivity towards reducing agents. However, all experimental approaches led to either decomposition products or renewed isolation of the starting materials and the synthesis of dinuclear gallium compounds via reductive coupling of two CAAC-Ga fragments was found not to be feasible. A different approach towards low-valent gallium compounds was the chemical reduction of Lewis-base-stabilized digallanes(4), in which the two gallium atoms are already connected via a σ bond. The synthesis of such compounds by reaction of either the subhalide ´GaI` or the mixed-valent salt [Ga]+[GaCl4]– with two equivalents of the free MeCAAC did not afford the double Lewis-base-stabilized [Ga2X4(MeCAAC)2] species (X = I, Cl). However, [Ga2Cl4(MeCAAC)2] was accessible through ligand exchange reaction of [Ga2Cl4(1,4-dioxane)2] with two equivalents of MeCAAC, due to the relatively weakly-coordinating nature of 1,4-dioxane. In an analogous fashion, three additional Lewis-base-stabilized digallanes(4) could be realized when the carbenes CyCAAC, SIDep und IDipp were used. The reactivity of the Lewis-base-stabilized digalliumtetrachlorides was tested towards different reducing agents. However, none of the reactions led to a distinct product formation and the synthesis of neutral, Ga-Ga multiple bond systems could not be realized in this manner. However, treatment of [Ga2Cl4(MeCAAC)2] with two equivalents of 1,3,2 diazaborolyllithium induced Ga-Ga bond cleavage and [GaCl2{B(NDippCH)2}(MeCAAC)] was isolated as the only boron-containing compound. The halide exchange reactions of the double Lewis-base adducts of digalliumtetrachloride were also investigated. Treatment of [Ga2Cl4(MeCAAC)2] and [Ga2Cl4(CyCAAC)2] with 1.3 molar equivalents of either BBr3 or BI3, well established reagents for halide exchange at other Group 13 elements, yielded the corresponding [Ga2X4(MeCAAC)2] (X = Br, I ) and [Ga2X4(CyCAAC)2] (X = Br, I), with retention of the carbene ligands. Also, the reaction of [Ga2Br4(CyCAAC)2] with BI3 afforded the fully iodinated species. In contrast to the MeCAAC-stabilized compounds, which feature extreme insolubility in common organic solvents, the CyCAAC-stabilized compounds could be characterized by NMR spectroscopy and X-ray diffraction. 2 Lewis-base-stabilized beryllium compounds The reaction of BeCl2 with two equivalents 1,3,2-diazaborolyllithium provided the homoleptic, linear Be{B(NDippCH)2}2. In its 9Be NMR spectrum, the compound shows a chemical shift of δ = 45 ppm, significantly outside the normal range of two-coordinate beryllium compounds. The electrophilic nature of the beryllium center in Be{B(NDippCH)2}2 was calculated by quantum chemical calculations and demonstrated by its reactivity towards different substrates: methanolysis of Be{B(NDippCH)2}2 induced a Be-B bond cleavage, and, along with insoluble materials presumed to be the polymeric beryllium methanolate, cleanly afforded the protonated 1,3,2 diazaborole. The use of deuterated MeOD in the reaction confirmed methanol as the proton source. Treatment of Be{B(NDippCH)2}2 with one equivalent of the small carbene IMe effected addition at the beryllium center to yield the trigonal mixed Lewis-base adduct. The heteroleptic BeCl{B(NDippCH)2} could not be synthesized by the reaction of BeCl2 with equimolar amounts of 1,3,2-diazaborolyllithium. Therefore, [BeClCp*] was used as starting material for the synthesis of novel, heteroleptic sp-hybridized beryllium species. Treatment of [BeClCp*] with various NHCs did not lead to the expected adduct formation, but yielded, only in the case of IiPr, the metallocene [BeCp*2] and the double Lewis-base adduct [BeCl2(IiPr)2] in a ligand exchange reaction. The reaction of [BeClCp*] with equimolar amounts of 1,3,2 diazaborolyllithium formed the linear coordinated [BeCp*{B(NDippCH)2}] in a salt elimination reaction. A central part of this work was the monomerization of BeCl2 by the use of CAAC ligands. Four differerent [BeCl2(RCAAC)] species (R = Me, Cy, Et, Menth) were synthesized via reaction of the corresponding free carbenes and BeCl2. Furthermore, the reactivity of these kinds of compounds towards different substrates was investigated. Treatment of [BeCl2(MeCAAC)] with equimolar amounts of 1,3,2-diazaborolyllithium afforded the trigonal mixed Lewis-base adduct [BeCl{B(NDippCH)2}(MeCAAC)] in a salt elimination reaction. This compound showed limited stability under reduced pressure, in solution as well as in the solid state, and subsequently formed the protonated 1,3,2 diazaborole and a beryllium containing compound that could not be further identified. The reaction of [BeCl2(MeCAAC)] with Bogdanović-Magnesium ([Mg(C14H10)(thf)3]) provided the CAAC-stabilized berylliumanthracendiyl [Be(C14H10)(MeCAAC)], which was isolated as a red solid. The mechanism of this reaction might be described as a nucleophilic addition of the dianionic anthracene unit to the beryllium center with concomitant loss of MgCl2. [Be(C14H10)(MeCAAC)] shows structural similarities to the magnesium containing species [Mg(C14H10)(thf)3], as both compounds show a non-planar anthracene moiety in their solid-state structures, due to the loss of aromaticity of the substituent. None of the attempts to chemically reduce the various [BeCl2(RCAAC)] compounds with a range of one-electron reducing agents afforded a selective reaction product, and either decomposition products or starting materials were isolated. However, treatment of the Lewis-base adducts [BeCl2(MeCAAC)] and [BeCl2(CyCAAC)] with potassium graphite in the presence of an additional equivalent of RCAAC (R = Me, Cy) yielded the homoleptic and heteroleptic compounds [Be(CyCAAC)2], [Be(MeCAAC)2] and [Be(MeCAAC)(CyCAAC)]. The solid-state structures of the double Lewis-base stabilized beryllium compounds show linear geometries around the beryllium center and significant differences to their beryllium-containing starting materials. A contraction of the Be1-C1 bonds as well as an elongation of the ligand-centered C1-N1 bonds was observed, indicative of strong Be-C bonding. Whereas the beryllium atom is usually found in its +II oxidation state, the central atom in the linear [Be(CAAC)] compounds is formally in its elemental form. Therefore, these compounds represent the first neutral complexes with a formally zerovalent CAAC-stabilized s-block element. The unusual electronic structure of these compounds is emphasized by their deep violet color (λmax (THF) = 575/579 nm). Quantum chemical calculations describe the bonding situation in [Be(CAAC)2] with a combination of donor-acceptor interactions between two ground-state singlet CAAC ligands and Be(0) in a 1s22s02p2 electronic configuration, resulting in a 3c 2e− π bond stretching over the C Be C core. Furthermore, the stabilization arising from π backdonation from Be to the CAAC ligands was found to significantly predominate over that from σ-donation from CAAC to the beryllium center. The NHC-stabilized compounds [Be(IDipp)2] and [Be(IDipp)(IMes)] and the mixed NHC/CAAC-stabilized species [Be(MeCAAC)(NHC)] (NHC = IDipp, IMes, SIDep) could not be synthesized. This might be explained by the different electronic properties of the carbenes. On the one hand, the π-accepting abilities of the NHCs are likely insufficient to form a 3c 2e− π bond. On the other hand, the stability of the mixed CAAC/NHC stabilized Be(0) compounds might not be sufficient due to differences in the σ-donating and π accepting properties of the ligands, which limits the formation of a symmetrical 3c 2e− π bond across the C-Be-C unit. N2 - Die vorliegende Arbeit ist in zwei Abschnitte gegliedert und befasst sich im ersten Teil mit der Darstellung und Reaktivität neuartiger, Carben-stabilisierter Galliumverbindungen. Der zweite Teil wurde den Untersuchungen zur Darstellung von berylliumhaltigen Verbindungen gewidmet, wobei, neben der Synthese von neuartigen, monomeren, sp-hybridisierten Berylliumverbindungen, die Stabilisierung niedervalenter Berylliumverbindungen durch die Verwendung von Carbenen einen zentralen Teil der Arbeit darstellt. 1 Lewis-Basen-stabilisierte Galliumverbindungen Zur Darstellung von Carben-stabilisierten, niedervalenten Galliumverbindungen wurden zwei unterschiedliche Syntheserouten herangezogen. Dabei konnten zum einen vier [GaCl3(RCAAC)]-Spezies (R = Me, Cy, Et, Menth) dargestellt werden, deren Verhalten unter reduktiven Bedingungen untersucht wurde. Jedoch führte keiner der Versuche zur chemischen Reduktion dieser Systeme zu einheitlichen Produkten und die Darstellung von dinuklearen Galliumverbindungen durch eine reduktive Kupplung zweier CAAC-Ga-Fragmente war auf diesem Weg nicht realisierbar. Ein weiterer Ansatz zur Darstellung von niedervalenten Digalliumverbindungen war die Reduktion Lewis-Basen-stabilisierter Digallan(4)-Verbindungen, bei welchen die beiden Galliumatome bereits über eine σ Einfachbindung verknüpft vorliegen. Die Synthese solcher Verbindungen durch die direkte Umsetzung des Galliumsubhalogenids ´GaI` bzw. des gemischt-valenten Salzes [Ga]+[GaCl4]– mit zwei Äquivalenten des freien Carbens MeCAAC führte nicht zu den doppelt Carben stabilisierten [Ga2X4(MeCAAC)2]-Spezies (X = I, Cl). Jedoch konnte [Ga2Cl4(MeCAAC)2] ausgehend von [Ga2Cl4(1,4 Dioxan)2], auf Basis der relativ schwach koordinierenden 1,4-Dioxan-Liganden, mittels Ligandaustauschreaktion dargestellt werden. In analoger Weise waren drei zusätzliche Vertreter realisierbar, wobei die Carbene CyCAAC, SIDep und IDipp verwendet wurden. Die Reaktivität der Lewis-Basen-stabilisierten Digalliumtetrachloride wurde gegenüber unterschiedlicher Reduktionsmittel getestet, wobei bei keiner der Umsetzungen ein einheitliches Produkt isoliert werden konnte. Die Darstellung von neutralen, Ga-Ga-Mehrfachbindungssystemen war folglich auf diese Weise nicht möglich. Die Umsetzung von [Ga2Cl4(MeCAAC)2] mit zwei Äquivalenten 1,3,2-Diazaborolyllithium führte zu einem Ga-Ga-Bindungsbruch und [GaCl2{B(NDippCH)2}(MeCAAC)] konnte als einziges Bor-haltiges Produkt isoliert werden. Ein weiterer zentraler Bestandteil dieser Arbeit beschreibt die Halogenaustauschreaktionen der doppelt Lewis-Basen-stabilisierten Digalliumtetrachloride. Die Verbindungen [Ga2Cl4(MeCAAC)2] und [Ga2Cl4(CyCAAC)2] wurden jeweils mit BBr3 oder BI3 umgesetzt, welche gängigerweise zum Halogenaustausch weiterer Gruppe-13-Verbindungen eingesetzt werden. Alle Reaktionen führten zu einem vollständigen Halogenaustausch der Digalliumtetrachloride unter Retention der Liganden und die Produkte [Ga2X4(MeCAAC)2] (X = Br, I) und [Ga2X4(CyCAAC)2] (X = Br, I) konnten isoliert werden. Auch die Umsetzung von [Ga2Br4(CyCAAC)2] mit BI3 lieferte die iodierte Spezies. Die CyCAAC-stabilisierten Vertreter weisen im Gegensatz zu den MeCAAC-stabilisierten Spezies eine bessere Löslichkeit in gängigen organischen Lösungsmitteln auf und konnten anhand von NMR-spektroskopischen Methoden charakterisiert werden. 2 Lewis-Basen-stabilisierte Berylliumverbindungen Durch die Umsetzung von BeCl2 mit zwei Äquivalenten 1,3,2-Diazaborolyllithium konnte das homoleptisch substituierte, lineare Be{B(NDippCH)2}2 dargestellt werden. Dieses zeigt im 9Be NMR-Spektrum eine Resonanz bei δ = 45 ppm, welche im Vergleich zu anderen linear-koordinierten Berylliumverbindungen weit zu tiefem Feld verschoben ist und bis dato das erste Beispiel dieses Frequenzbereichs darstellt. Der elektrophile Charakter des Berylliumatoms in Be{B(NDippCH)2}2 wurde anhand quantenchemischer Rechnungen postuliert und durch die Reaktivität der Verbindung gegenüber unterschiedlichen Substraten bestätigt. Die Methanolyse von Be{B(NDippCH)2}2 führt zu einem Be-B Bindungsbruch und neben dem, in gängigen Lösungsmitteln unlöslichen, Feststoff (Ben(OMe)m), wurde das protonierte 1,3,2 Diazaborol isoliert. Anhand von Deuterierungsexperimenten konnte Methanol als Protonenquelle identifiziert werden. Die Reaktion mit äquimolaren Mengen IMe lieferte ein trigonal planares Lewis-Basenaddukt. Durch die Umsetzung von BeCl2 mit stöchiometrischen Mengen des 1,3,2 Diazaborolyllithiums konnte die einfach borylierte Verbindung BeCl{B(NDippCH)2} nicht realisiert werden. Um heteroleptisch substituierte, lineare Berylliumverbindungen darzustellen, wurde [BeClCp*] als Edukt eingesetzt. Die Umsetzung mit NHCs führte lediglich im Fall des sterisch weniger anspruchsvollen IiPr zu einer Reaktion, welche nicht unter Adduktbildung verlief, sondern unter Ligandaustausch [BeCp*2] und das zweifach IiPr-stabilisierte Berylliumdichlorid lieferte. Die Umsetzung von [BeClCp*] mit äquimolaren Mengen 1,3,2 Diazaborolyllithium verlief in einer Salzeliminierung und das linear koordinierte [BeCp*{B(NDippCH)2}] wurde isoliert. Ein zentraler Bestandteil dieser Arbeit war die Monomerisierung von BeCl2 durch die Verwendung von CAAC-Liganden. Vier unterschiedlich substituierte Vertreter dieser [BeCl2(RCAAC)]-Spezies (R = Me, Cy, Et, Menth) konnten durch Umsetzung von BeCl2 mit dem entsprechenden freien Carben realisiert werden. Weiterhin erfolgte eine Untersuchung dieser Verbindungen gegenüber unterschiedlicher Substrate. Die Reaktion von [BeCl2(MeCAAC)] mit 1,3,2-Diazaborolyllithium verlief in einer Salzeliminierungsreaktion zu dem verzerrt trigonal planar koordinierten [BeCl{B(NDippCH)2}(MeCAAC)]. Die Verbindung konnte als Feststoff isoliert werden, wies jedoch eine limitierte Stabilität auf und zerfiel, sowohl in Lösung als auch in fester Form, unter Vakuum in das protonierte 1,3,2-Diazaborol und eine berylliumhaltige Verbindung, dessen Struktur nicht aufgeklärt werden konnte. Bei der Umsetzung von [BeCl2(MeCAAC)] mit Bogdanović-Magnesium ([Mg(C14H10)(thf)3]) konnte das CAAC-stabilisierte Berylliumanthracendiyl [Be(C14H10)(MeCAAC)] als roter, kristalliner Feststoff isoliert werden. Der Reaktionsmechanismus dieser Umsetzung ist bislang nicht vollständig geklärt, jedoch wird eine nukleophile Addition des Dianions des Anthracens an das Berylliumzentrum postuliert, welche eine Salzeliminierung zur Folge hat. Die Verbindung weist strukturelle Ähnlichkeiten zu der Magnesium-haltigen Spezies im Festkörper auf und für beide Verbindungen wird, durch den Verlust der Aromatizität des Anthracenylsubstituenten, eine Aufhebung der Planarität des Ringsystems beobachtet. Versuche zur Reduktion der unterschiedlich substituierten [BeCl2(RCAAC)]-Verbindungen mit einer Reihe an Einelektronen-Reduktionsmitteln führten nicht zum Erfolg und es konnte in keinem der Fälle ein einheitliches Produkt isoliert werden. Hingegen lieferte die Reaktion der Lewis-Basenaddukte [BeCl2(MeCAAC)] und [BeCl2(CyCAAC)] mit Kaliumgraphit und einem zusätzlichen Äquivalent RCAAC (R = Me, Cy) die homoleptisch- und heteroleptisch-substituierten Verbindungen [Be(CyCAAC)2], [Be(MeCAAC)2] und [Be(MeCAAC)(CyCAAC)]. Die Festkörperstrukturen der doppelt Lewis-Basen-stabilisierten Berylliumverbindungen zeigen deutliche Unterschiede zu denen der Edukte. Sowohl eine Kontraktion der Be1-C1-Bindungslängen, als auch eine Verlängerung der ligandzentrierten C1-N1-Bindungslängen ist zu beobachten, womit die Be-C-Bindungen der [BeL2] Verbindungen mit einem partiellen Doppelbindungscharakter beschrieben werden können. Im Gegensatz zu anderen, zweifach koordinierten Berylliumverbindungen, welche gewöhnlich in der formalen Oxidationsstufe +II vorliegen, wird in [Be(CAAC)2] das Berylliumatom formal in seiner elementaren Form stabilisiert. Die Verbindungen stellen somit bis dato die ersten neutralen Komplexe dar, bei welchen ein s-Block-Element in der formalen Oxidationsstufe 0 stabilisiert wird. Die ungewöhnliche elekronische Struktur dieser Spezies wird bereits an der tief-violetten Färbung der Verbindungen deutlich (λmax (THF) = 575/579 nm). Quantenmechanische Berechnungen beschreiben die Bindungssituation in [Be(CAAC)2] mit einer Kombination aus Donor-Akzeptor-Wechselwirkungen zwischen zwei CAAC-Liganden im Singulett-Grundzustand und einem neutralen Be(0) im doppelt angeregten Zustand (1s22s02p2). Daraus resultiert eine 3c-2e−-π-Bindung, welche sich über den CCarben Be CCarben-Kern erstreckt und im Vergleich zur σ Hinbindung einen größeren Anteil zur Stabilisierung des Systems beiträgt. Die analogen NHC-stabilisierten Vertreter [Be(IDipp)2] bzw. [Be(IDipp)(IMes)] als auch die heteroleptisch substituierten Spezies [Be(MeCAAC)(NHC)] (NHC = IDipp, IMes, SIDep) konnten nicht realisiert werden. Eine Erklärung hierfür könnten die elektronischen Unterschiede der Carbene liefern. Zum einen reicht vermutlich die Akzeptorfähigkeit der NHCs nicht aus, um eine 3c-2e−-π-Bindung auszubilden und zum anderen ist auch die Stabilität von gemischten CAAC/NHC-stabilisierten Be(0)-Komplexen nicht gegeben, wenn durch die unterschiedliche σ-Donor bzw. π-Akzeptorfähigkeit der Liganden keine symmetrische π-Bindung ausgebildet werden kann. KW - Beryllium KW - Beryllium(0)-Verbindungen KW - Gallium KW - Lewis-Basen Addukte KW - niedervalente Verbindungen KW - Lewis-Basen-stabilisierte Galliumverbindungen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-166381 ER - TY - THES A1 - Schorr, Fabian T1 - Der Einfluss von Alkinyl- und Thienyl-Substituenten auf die Reaktivität von Diboranen(4) T1 - The impact of alkynyl and thienyl functions on the reactivity of diboranes(4) N2 - Im Rahmen der Arbeit werden neue Alkinyl-substituierte Diaryldiborane(4) dargestellt und auf deren Eignung zur Oligomerisierung untersucht. Des Weiteren werden neue 1,2-Dialkinyldiborane(4) synthetisiert und deren Reaktivität beleuchtet. Außerdem werden neue 1,2-Diaryl-1,2-diheteroaryldiborane(4) dargestellt und ebenfalls auf deren Reaktivität hin untersucht. N2 - This work investigates the synthesis of novel alkynyl-functionalised diaryldiboranes(4) and their use in a catenation protocol. Furthermore new 1,2-Dialkynyldiboranes(4) are generated and their behaviour towards different reagents was examined. Also a novel 1,2-Diaryl-1,2-diheteroaryldiborane(4) was prepared and its reactivity was investigated. KW - Diboran KW - Alkin KW - Diborane(4) KW - Alkinyle KW - Thienyl KW - Oligomerisierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-273668 ER - TY - THES A1 - Schneider, Christoph T1 - Synthese und Reaktivität von Lewis-basischen Carbonylkomplexen der Gruppe 8 T1 - Synthesis and reactivity of Lewis basic group 8 carbonyle complexes N2 - Im Rahmen der vorliegenden Arbeit wurden Untersuchungen zur Lewis-Basizität von Carbonylkomplexen der Gruppe 8 durchgeführt. Hierzu wurde eine Reihe von Komplexen mit GaCl3 als Lewis-Säure zu den entsprechenden Lewis-Addukten umgesetzt. Durch Analyse der experimentell ermittelten spektroskopischen und strukturellen Parameter sowie auf der Basis von Transferexperimenten wurde die relative Lewis-Basizität dieser Verbindungen zueinander bestimmt. Durch Umsetzung von Eisenpenta-, -tetra- und -tricarbonylkomplexen mit den sterisch anspruchslosen Liganden PMe3, IMe und CNtBu mit der Lewis-Säure GaCl3 wurde eine Serie von GaCl3-Addukten dargestellt und diese durch NMR- und IR-Spektroskopie sowie Röntgenstruktur- und Elementaranalyse vollständig charakterisiert. Während die Eisentetracarbonyladdukte 36-38 die gleiche cis-Geometrie aufweisen ist die Adduktbildung bei den Eisentricarbonylen 43-45 mit Konformationsänderungen in den Addukten 46, 48 und 49 verbunden. Hierbei zeigen die GaCl3-Addukte 46, 48 und 49 drei unterschiedliche Geometrien. Vergleicht man die Fe-Ga-Bindungslängen beziehungsweise die Winkelsummen der ClGa-Cl-Winkel, so zeichnet sich ein Trend für die Lewis-Basizität in Abhängigkeit von der Natur der σ-Donorliganden ab. Demnach weisen die IMe-substituierten Eisencarbonyle im Vergleich zu den PMe3- beziehungsweise tBuNC-substituierten Analoga die höchste Lewis-Basizität auf. Zudem konnte belegt werden, dass die Lewis-Basizität auch durch die Anzahl an σ-Donorliganden im Komplex erhöht wird. Die schrittweise Erhöhung des sterischen Anspruchs der Liganden in den Eisencarbonylen erschwert die Adduktbildung und äußert sich auch in der trans-ständigen Anordnung der Lewis-Säure. Die Gegenwart von zwei sterisch anspruchsvollen Liganden verhindert indes die Adduktbildung mit GaCl3 und es kommt zu einer Disproportionierung der Lewis-Säure in eine kationische [GaCl2]+-Einheit, welche an das Eisenzentrum koordiniert und eine anionische [GaCl4]--Einheit, die als Gegenion fungiert. Neben dem elektronischen und sterischen Einfluss der Liganden auf die Lewis-Basizität und die Adduktbildung in Eisencarbonylen wurde auch der Einfluss des Zentralatoms untersucht. Hierzu wurden analoge Ruthenium- und Osmiumcarbonyle dargestellt und mit der Lewis-Säure GaCl3 umgesetzt. Hierbei wurde die Ligandensphäre im Vergleich zu den Eisencarbonylen nicht verändert. Um die M-Ga-Bindungsabstände untereinander vergleichen zu können, wurde aufgrund der unterschiedlichen Kovalenzradien der Zentralmetalle der relative Abstand (drel) herangezogen, wodurch die relativen Lewis-Basizitäten abgeschätzt werden konnten. Hierbei konnte der gleiche Trend wie bei den Eisencarbonyladdukten beobachtet werden, dass mit steigender Anzahl an σ-Donorliganden die Lewis-Basizität erhöht wird. Weiterhin liegt aufgrund der kleineren drel-Werte die Vermutung nahe, dass sowohl Ruthenium-, als auch Osmiumcarbonyle Lewis-basischer sind als die entsprechenden Eisencarbonyle. Diese Befunde wurden weiterhin durch Transferexperimente untermauert. Hierzu wurden verschiedene GaCl3-Addukte mit Carbonylkomplexen in CD2Cl2 umgesetzt und eine eventuelle Übertragung der Lewis-Säure GaCl3 NMR-spektroskopisch verfolgt. Hierdurch konnte gezeigt werden, dass die Lewis-Säure GaCl3 jeweils erfolgreich auf die Komplexe mit der höheren Anzahl an σ-Donorliganden übertragen wird, was deren höhere Lewis-Basizität belegt. Zudem konnte bestätigt werden, dass Ruthenium- und Osmiumcarbonyle Lewis-basischer als die analogen Eisencarbonyle sind, zwischen Ruthenium und Osmium bei gleicher Ligandensphäre jedoch kaum Unterschiede in der Lewis-Basizität vorgefunden werden. Zusätzlich wurden auch ausgewählte Gruppe 8-Carbonyladdukte mit dem literaturbekannten Platinkomplex [(Cy3P)2Pt] (7) umgesetzt. Hierbei wurde in allen Fällen ein Transfer von GaCl3 auf die Platinverbindung beobachtet, welche demnach die stärkste Lewis-Base in dieser Studie darstellt. Neben einkernigen GaCl3-Addukten wurden auch dinukleare Gruppe 8-Carbonyle dargestellt. Hierzu wurde anstelle von GaCl3 die Lewis-Säure Ag+ eingesetzt, was zur Bildung der zweikernigen Addukte 83-86 führte. Hierdurch konnte gezeigt werden, dass neben den Hauptgruppenmetallen wie Gallium auch Gruppe 8-Addukte mit Übergangsmetallen zugänglich sind. Des Weiteren konnten die zweikernigen Komplexe 87-89 mit chelatisierenden beziehungsweise verbrückenden Liganden dargestellt und deren Reaktivität gegenüber GaCl3 untersucht werden. Der Unterschied zwischen diesen beiden Ligandenarten besteht darin, dass der M-M-Abstand bei Verwendung von chelatisierender Liganden eher gering ist, weshalb hier immer noch M-M-Wechselwirkungen möglich sind, während diese bei Verwendung eines Brückenliganden verhindert werden. Ausgewählte Gruppe 8-Carbonyle wurden auch in Bezug auf ihre katalytische Aktivität in der Hydrosilylierung von Benzaldehyd (90) mit Phenylsilan (91) untersucht. Hierbei konnte gezeigt werden, dass NHC-substituierte Carbonylkomplexe einen höheren Umsatz ermöglichen als Phosphan- oder Isocyanid-substituierte Verbindungen. Zudem wurde deutlich, dass die analogen Ruthenium- und Osmiumcarbonyle eine wesentlich geringere Aktivität bei der Hydrosilylierung aufweisen als die Eisenanaloga, trotz einer höheren Lewis-Basizität. Abschließend konnten Halogenidabstraktionsreaktionen exemplarisch an den GaCl3-Addukten 46, 66 und 76 durch Umsetzung mit GaCl3 demonstriert werden, wodurch die kationischen dimeren Komplexe 104-106 erhalten wurden. In diesen Komplexen sind formal zwei [(Me3P)2(OC)3M-GaCl2]+-Einheiten durch Ga-Cl-Wechselwirkungen miteinander verbrückt. Im Gegensatz dazu führte die Umsetzung von 46, 66 und 76 mit Na[BArCl4] (101) zu keiner Chloridabstraktion. Stattdessen konnte eine Verbrückung zweier GaCl3-Adduktfragmente durch zwei Natriumkationen beobachtet werden. N2 - This work describes a detailed study on the Lewis basicity of group 8 carbonyl complexes. Thus, a variety of carbonyl complexes was treated with GaCl3 as Lewis acid to afford the corresponding Lewis adducts. Based on the analysis of spectroscopic and structural parameters of these adducts as well as on transfer experiments it was possible to evaluate the relative Lewis basicities of the metal carbonyl complexes. The reaction of iron penta-, tetra- and tricarbonyl complexes with the sterically less demanding ligands PMe3, IMe and tBuNC with the Lewis acid GaCl3 yielded a series of GaCl3 adducts, which could be fully characterized by NMR- and IR-spectroscopy, as well as X-ray diffraction and elemental analysis. While the three iron tetracarbonyl adducts 36-38 adopt the same cis geometry, adduct formation of the iron carbonyl complexes 43-45 entails a conformational change in the adducts 46, 48 and 49. Here, different geometries were observed. Comparison of the Fe-Ga bond lengths and the sum of the Cl-Ga-Cl angles of the adducts revealed a clear trend for the Lewis basicity depending on the nature of the σ-donor ligand. Thus, IMe substituted complexes showed the greatest Lewis basicity as compared to their PMe3 and tBuNC substituted analogs. In addition, the more σ-donor ligands are present in the iron carbonyls, the higher their Lewis basicity. Stepwise increase of the steric demand of the σ-donor ligands makes the adduct formation more difficult, which is illustrated in a trans position of the GaCl3. The presence of two bulky ligands fully hampered the formation of simpler GaCl3 adducts. Instead disproportion reactions of the Lewis acid into cationic [GaCl2]+ and anionic [GaCl4]- unit took place, with the [GaCl2]+ fragment coordinated to the iron center and [GaCl4]- as counterion. In addition to the electronic and steric influences of the ligands on the Lewis basicity and the adduct formation process of iron carbonyl complexes, the influence of the central atom was also investigated. To this end, analogous ruthenium- and osmium carbonyl complexes were prepared and treated with GaCl3, while the ligand sphere was retained with respect to the iron carbonyl complexes. To enable a direct comparison of the M-Ga bond distances, the relative distance (drel) was employed, which accounts for the different covalent radii of the metal centers. Accordingly, the relative Lewis basicity of the different complexes could be evaluated. Here, the same trend as observed for the iron carbonyl complexes was revealed: the more σ-donor ligands are present, the higher the Lewis basicity. Also, the relativly small drel-values of the ruthenium- and osmium carbonyl complexes suggested a higher Lewis basicity as compared to the corresponding iron carbonyl complexes. These results were clearly validated by transfer experiments. In general, several GaCl3 adducts were reacted with carbonyl complexes in CD2Cl2 while a possible transfer of the Lewis acid GaCl3 was monitored by NMR spectroscopy. The results showed that the Lewis acid GaCl3 is transfered always to the complex with a higher number of σ-donor ligands, thus verifying the higher Lewis basictiy of the latter complexes. In addition, the experiments also showed that ruthenium- and osmium carbonyl complexes are more Lewis basic than analogous iron carbonyl complexes while ruthenium and osmium feature a similar Lewis basicity. Additionally, transfer experiments between group 8 carbonyl adducts and the well-known Lewis base [(Cy3P)2Pt] (7) were carried out, which highlighted the strong Lewis basic character of the platinum compound 7. In addition to these mononuclear GaCl3 adducts, several dinuclear group 8 carbonyl complexes were prepared. Therefore, Ag+ was used as Lewis acid instead of GaCl3, which resulted in the generation of the dinuclear adducts 83-86. These results demonstrated that not only main group metals as gallium, but also transition metals can be employed in the syntheses of group 8 carbonyl adducts. It was also possible to prepare the dinuclear complexes 87-89 featuring either chelating or bridging ligands and to study their reactivity towards GaCl3. The main difference between these two classes of ligands is provided by the fact that the M-M disctance is much smaller in complexes bearing chelating ligands for which reason M-M communication remains possible here. By contrast, employing bridging ligands such an interaction can be ruled out completely. Selected group 8 carbonyl complexes were also used in catalysis experiments to evaluate their catalytic activity in the hydrosilylation of benzaldehyde (90) with phenylsilan (91). The study showed that NHC substituted carbonyl complexes enable a significantly higher turnover than phosphine- or isocyanid substituted complexes. In addition, ruthenium- and osmium carbonyl complexes are far less active catalysts in hydrosilylation reactions than corresponding iron carbonyl complexes, despite their higher Lewis basicity. Addition of one equivalent of GaCl3 to the adducts 46, 66 und 76 resulted in chloride abstraction reactions to afford the cationic and dimeric complexes 104-106. Here, two [(Me3P)2(OC)3M-GaCl2]+ units are bridged by Ga-Cl interactions. By contrast, treatment of 46, 66 und 76 with Na[BArCl4] (101) did not result in chloride abstraction reactions. Instead, the dimeric complexes 107-109 were isolated, in which two GaCl3 adducts are connected by two sodium cations. KW - Lewis-Addukt KW - Metallcarbonyle KW - Carbonyladdukte der Gruppe 8 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134211 ER - TY - THES A1 - Schmidt, Uwe T1 - Sandwich- und Halbsandwich-substituierte Diborene – Synthese, Eigenschaften und Reaktivität T1 - Sandwich- and half sandwich-substituted diborenes – synthesis, properties and reactivity N2 - Innerhalb der vorliegenden Arbeit ist es gelungen, durch das Einführen von Cymantrenylresten neue Diborene darzustellen, welche Halbsandwich-Substituenten tragen und somit das Substitutionsmuster von basenstabilisierten Diborenen um eine weitere Verbindungsklasse zu erweitern. Neben Cymantrenylresten gelang es auch, Ferrocenylreste als weitere Substituenten in entsprechende Diborensysteme einzuführen. Über die Darstellung neuer Diborensysteme hinaus, waren Reaktivitätsstudien am Diboraferrocenophan 29 ebenso ein wesentlicher Bestandteil der vorliegenden Arbeit. Es konnte gezeigt werden, dass 29 mit kleinen Lewis-Basen, Element-Wasserstoff-Verbindungen und Hydrierungsreagenzien zur Reaktion gebracht werden kann. N2 - The work in this project resulted in the synthesis of new diborenes with cymantrenyl substituents. With these half-sandwich substituents it was possible to expand the substitution pattern of base-stabilized diborenes by further examples. In addition to cymantrenyl substituents, ferrocenyl substituents were introduced into the corresponding diborene systems. In addition to the synthesis of new diborene systems, reactivity studies on the diboraferrocenophane 29 constituted another major component of the present work. It was shown that 29 reacts with small Lewis-bases, element-hydrogen compounds, and hydrogenation reagents. KW - Diborene KW - Mehrfachbindung KW - Cymantren KW - Ferrocen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234601 ER - TY - THES A1 - Schleier, Domenik T1 - Using Photoionization to Investigate Reactive Boron Species and the Kinetics of Hydrocarbon Radicals T1 - Die Untersuchung von Reaktiven Borspezies und die Kinetik von Kohlenwassterstoffradikalen mittels Photoionization N2 - This thesis highlights the importance of isomer-selective approaches for the complete analysis of chemical processes. The method of choice is photoelectron/photoion coincidence spectroscopy, which allows simultaneous detection of electrons and ions coming from a single ionization event. Ionization techniques are sensitive and can record multiple species simultaneously, rendering them ideal tools to probe molecular transformations. Coupling these setups to synchrotron radiation allows one to analyze complex mixtures with isomer selectivity, based on ionization energies and vibrational structure in the cation, without any prior separation steps. Only few setups exist that can be used to gather these data, although their impact and applicability is growing steadily in various fields. For closed-shell species an easier and more widely used method is gas-chromatography, but most open shell species would not survive the separation process. Due to the reactivity of radicals they have to be created by selectively converting stable precursor molecules. Depending on the radical generation method different properties can be investigated ranging from thermodynamic data, over concentrations in high temperature environments, to chemical kinetics. The first part of this thesis deals with the determination of bimolecular rate constants. Isomeric hydrocarbon radicals were generated by a high intense UV light pulses and their kinetics with oxygen was measured. The pressure dependence of different isomers in the falloff region was compared to theoretical models, and their reactivity could be explained. The second part deals with boron containing compounds in various electronic situations. The corresponding precursors were successfully synthesized or could be bought. They were subjected to fluorine atoms in chemical reactors or destroyed pyrolytically at high temperatures. Most investigated species exhibited vibronic effects that could be elucidated using high level computations. N2 - Die vorliegende Arbeit lässt sich in zwei Unterkategorien gliedern. Sie befasst sich zum einen mit der isomerenselektiven Identifikation von hochreaktiven anorganischen Verbindungen. Zum anderen werden Ratenkonstanten für die Reaktionen verschiedener Kohlenwasserstoffradikale mit Sauerstoff ermittelt. Beide Bereiche sind durch die Frage der Energiespeicherung und -gewinnung in der Zukunft unmittelbar miteinander verbunden. Die Herausforderung reaktive Moleküle zu untersuchen, liegt oft darin sie in einer inerten Atmosphäre erzeugen zu müssen. Nur unter diesen Bedingungen hat ihre Reaktivität kaum Möglichkeiten sich zu entfalten. Hierzu wurden stabile Vorläufermoleküle in die Gasphase überführt und in einer verdünnten Umgebung möglichst selektiv in die gewünschte Radikalspezies überführt. Sowohl deren isomereselektive Identifikation als auch die Bestimmung der Ratenkonstanten wurde mittels Schwellenphotoelektronenspektroskopie durchgeführt. Mit Hilfe eines Photoelektron/Photoion Koinzidenz (PEPICO) Aufbaus konnten massenselektive Signale detektiert werden. Diese Methode benötigt eine Lichtquelle, die eine hohe Repetitionsrate aufweist und im VUV-Bereich komplett spektral durchstimmbar ist. Diese Voraussetzungen sind an Synchrotron-Strahlungsquellen verfügbar, weshalb die Experimente in dieser Arbeit an den entsprechenden Strahllinien an der SwissLightSource oder am Synchrotron SOLEIL durchgeführt wurden. Zur Unterstützung der experimentellen Daten wurden durch quantenchemische Rechnungen und Simulationen durchgeführt, aus denen eine klare isomerenselektive Zuordnung des jeweiligen Signals erfolgt. Die gesuchten Ratenkonstanten konnten mittels geeigneter Programme aus den Kinetikdaten extrahiert werden, wobei auch die Ratenkonstanten der Seitenreaktionen berücksichtigt wurden. KW - Biradikal KW - Kinetics KW - Spectroscopy KW - Photolysis KW - Radicals KW - Biradicals KW - Fotoionisation KW - Fotolyse KW - Synchrotronstrahlung KW - Synchrotron Radiation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-242137 ER - TY - THES A1 - Saalfrank, Christian T1 - Lewis-Basen stabilisierte, aromatische Verbindungen des Bors : Darstellung und Reaktivität T1 - Lewis-base stabelized, aromatic compounds of boron - synthesis and reactivity N2 - Die vorliegende Arbeit befasst sich mit der Darstellung und Untersuchung cyclischer konjugierter Systeme des Bors. Hierbei wurden die zentralen Ringeinheiten der organischen Analoga mit zwei Boratomen in 1,4-Position substituiert. 1 Darstellung und Eigenschaften des CyCAAC-stabilisierten 1,4 Diborabenzols (87) Die Darstellung eines weiteren Vertreters des basenstabilisierten 1,4-Diborabenzols orientierte sich an vorangegangen Arbeiten der Gruppe um Braunschweig auf diesem Gebiet. Das Cyclohexyl-CAAC koordinierte Diboracumulen (85) wurde unter einer gereinigten Acetylen-atmosphäre mit einem Druck von etwa 1 bar gerührt. Quantenchemische Rechnungen ergaben einen NICS(0)-Wert von –2.6483 des [B2C4]-Rings (vgl. NICS(0)Benzol: –8.1723; B3LYP/Def2SVP Niveau) und bestätigten zusätzlich die Bildung eines Ringstroms bzw. eines aromatischen Systems. Umsetzungen des Diborabenzols 87 mit den Alkalimetallen Lithium und Natrium wurden durchgeführt und die entsprechenden dianionischen Verbindungen 88 und 89 erhalten. Unter gleichen Reaktionsbedingungen wurden im Falle des Kaliums Einkristalle erhalten deren röntgenkristallographische Untersuchung den Konnektivitätsbeweis für das Monoanion 90 liefern. 2 Synthese und Umsetzungen CAAC-stabilisierter 9,10 Diboraanthracene Die Darstellung des 9,10-(Dibromo)diboraanthracens 63 entlehnt sich der Literatur und findet durch eine Abfolge von Salzmetathesereaktionen zwischen o(Bistrimethylsilyl)benzol (65) und Bortribromid statt. Nach der Koordination der CAAC-Liganden an 63 wurde die schrittweise reduktive Abstraktion der Bromatome möglich. Die Einelektronreduktionen von 92 und 93 lieferten nicht, wie erwartet, neutrale gemischtvalente Systeme. Röntgenkristallographische Untersuchungen an geeigneten Einkristallen der Verbindung 99 zeigten, dass sich eine salzartige Struktur bildete. Bei der Reduktion von 93 wurden beide Bromidreste abgespalten und das Diboraanthracenfragment liegt als Radikalkation vor. Die zweifache Reduktion der Verbindungen 92 und 93 liefert ebenfalls Produkte, die keine 11B-NMR-Resonanz zeigen. Dieser Umstand spricht erneut für die Generierung offenschaliger Systeme. Die Röntgenstrukturanalyse geeigneter Einkristalle der beiden erhaltenen Produkte 103 und 104 zeigte, dass die neutrale Diboraanthracenspezies gebildet wurde (Schema 58). ESR-Experimente bei tiefen Temperaturen lieferten Einsicht über den elektronischen Grundzustand der beiden Verbindungen 103 und 104. Die beiden Verbindungen liegen, unter den gewählten Bedingungen, im open shell-Singulett-grundzustand vor. Es ergeben sich Singulett-Triplett-Abstände ΔES→T = 0.43 kJ/mol (4.46 meV) für 103 bzw. ΔES→T = 2.3 kJ/mol (23.8 meV) für 104. Die Reduktion von 92 mit einem Überschuss von Lithium lässt die Darstellung des dianionischen Diborataanthracens 110 zu. Unter photochemischen Bedingungen bildet 103 eine zwitterionische Spiroverbindung 113, durch die Insertion eines Boratoms in den Pyrrolidinring des koordinierten CAAC-Liganden. Weiterhin sind 103 und 104 geeignete Ausgangsmaterialien zur Aktivierung kleiner Moleküle unter milden Bedingungen. Die Umsetzung der MeCAAC-Spezies 103 mit elementarem Schwefel liefert Verbindung 128, bei der eine S3-Brücke zwischen den Boratomen insertiert wird. Im Falle des CyCAAC-Diboraanthracens 104 konnte die Koordination eines CO-Moleküls an die Boratome (140) nachgewiesen werden. Zusätzlich konnten, durch die Darstellung des Halbsandwichkomplexes 149, erste Einsichten in die Verwendung des Diboraanthracens (104) als Ligand in der Übergangsmetallchemie gewonnen werden (Schema 60). Der Halbsandwichkomplex [η6-(9,10-(CyCAAC)2DBA)Cr(CO)3] (149) wurde durch die Zugabe von 104 zu [(MeCN)3Cr(CO)3] dargestellt und das zugehörige IR-Spektrum der Verbindung 149 identifiziert 104 als starken Elektronendonorliganden. N2 - This thesis deals with the synthesis and examination of cyclic conjugated systems of boron. The central ring-moiety of the organic analogues were substituted with two boron centres in 1,4-position. 1 Synthesis and properties of a CAAC-stabilized 1,4 diborabenzene (87) The synthesis of an additional example of base-stabilized 1,4-diborabenzene follows preceding studies of the Braunschweig´s research group on this topic. The cyclohexyl-CAAC coordinated diboracumulene (84) was stirred under an atmosphere of purified acetylene with a pressure of approximately 1 bar. Quantum chemical calculations, conducted on 87 established a NICS(0) value of –2.6483 at the [B2C4]-ring (cf. NICS(0)benzene: –8.1723; B3LYP/Def2SVP-level of theory) confirming the existence of a ring current and thus aromaticity of this system. Reaction of the diborabenzene 87 with the alkali metals lithium and sodium were performed and the corresponding dianionic compounds (88) and (89) were generated. Instead, for the reduction with potassium, under similar reaction conditions, single crystals were obtained that provided the evidence for the connectivity of the monoanionic species (90) by X-ray diffraction. 2 Synthesis and reactivity of CAAC stabilised 9,10 diboraanthracenes The synthesis of 9,10‐(dibromo)diboraanthracene 63 was performed according to a published procedure that follows a series of salt‐metathesis reactions of o‐bis(trimethylsilyl)benzene (65) and borontribomide. After the coordination of the CAAC ligands to compound 90 the stepwise reductive abstraction of the bromides was performed (Scheme 3). A single electron reduction of 92 and 93 did not result in the expected neutral mixed valence systems but instead provided products that did not show an 11B NMR-spectroscopic signal. X Ray crystallographic examination of suitable single crystals of the compound 93 showed a salt-like structure. Both bromides of 93 had been abstracted, leaving the diboraanthracene fragment as a radical cation. The double reduction of 92 and 93 also yielded 11B-NMR silent products, again suggesting the presence of open-shell systems. X-Ray diffraction of suitable single crystals of the obtained compounds 103 und 104 indicate the formation of the desired neutral diboraanthracene species In the solid state. Low temperature EPR-experiments gave insights into the electronic ground state of the compounds 103 und 104. Singlet-triplet gaps were deduced to be ΔES→T = 0.43 kJ/mol (4.46 meV) for 103 and ΔES→T = 2.3 kJ/mol (23.8 meV) for 104. Both compounds are present in open shell singlet ground state. The reduction of 92 with an excess of elemental lithium permitted the synthesis of the dianionic diborataanthracene 110. Under photochemical conditions by insertion of a boron atom into the pyrrolidine moiety of the coordinated CAAC ligand 103 forms a zwitterionic spiro-compound 113. Furthermore, 103 und 104 were found to be suitable reagents for the activation of small molecules under mild conditions. The reaction of MeCAAC-species 103 with elemental sulfur yields compound 128 with an S3 bridge between the boron atoms. For the CyCAAC-stabilized diboraanthracene 104 the coordination of a CO molecule to the boron atoms was observed (140). Additionally, initial insights were obtained into the ability of the diboraanthracene 104 to act as a ligand in transition metal chemistry by the synthesis of the halfsandwich-compound 149. The half sandwich complex [η6-(9,10-(CyCAAC)2DBA)Cr(CO)3] (149) was prepared by the addition of 104 to [(MeCN)3Cr(CO)3] and the IR-spectrum of 149 indicated that compound 104 is a strongly electron donating ligand. KW - Diradikal KW - Heteroacene KW - Anthracenanaloga KW - Offenschaliges System KW - Bor-11 KW - open-shell Singulett Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210578 ER - TY - THES A1 - Ritschel, Benedikt Tobias T1 - Lewis-Basen-stabilisierte Bor–Bor-Mehrfachbindungssysteme – Reaktivitätsstudien an Diboracumulenen und Dicyanodiborenen T1 - Lewis base-stabilized boron-boron multiple bonds - reactivity studies on diboracumulenes and dicyanodiborenes N2 - Die vorliegende Arbeit umfasst im Wesentlichen Studien über die Reaktivität von Diboracumulenen sowie Dicyanodiborenen gegenüber diversen Substraten verschiedener Substanzklassen, wie z. B. Acetylenen, Aminen, Aziden, Nitrilen, Isonitrilen und Übergangsmetallen. Auf diese Weise sollen zunächst Einblicke in das unterschiedliche Reaktionsverhalten der niedervalenten Borverbindungen ermöglicht sowie ein Verständnis für die erhaltenen, teils neuartigen, Bindungsmodi und Substanzklassen etabliert werden. Die jeweiligen MecAAC- und CycAAC-stabilisierten Verbindungen wurden hierbei auf den Einfluss des sterischen Anspruchs der Liganden in Bezug auf die Reaktivität untersucht. Die aufgeführten Kapitel beziehen sich daher auf die Reaktivität der Diboracumulene wie auch die der Dicyanodiborene gegenüber Verbindungen jeweils einer bestimmten Substanzklasse. Die erhaltenen Produkte werden, soweit möglich, miteinander verglichen. N2 - The present work mainly comprises studies on the reactivity of diboracumulenes as well as dicyanodiborenes towards diverse substrates of different substance classes, such as acetylenes, amines, azides, nitriles, isonitriles and transition metals. In this way, insights into the different reaction behavior of the low-valent boron compounds of the obtained, partly novel, binding modes and substance classes should be established. In this context, the respective MecAAC- and CycAAC-stabilized compounds were examined towards the influence of the steric requirement of the ligands with respect to the reactivity. Therefore, the chapters refer to the reactivity of the diboroacumulenes as well as that of the dicyanodiborenes towards compounds of a particular substance class in each case. Where possible, the products obtained are compared with each other. KW - Bor KW - Reaktivitätsstudien KW - reacitvity studies KW - Mehrfachbindung KW - Hauptgruppenelementverbindungen KW - Diboren KW - Diboracumulen KW - diborene KW - diboracumulene Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-243306 ER - TY - THES A1 - Rempel, Anna T1 - Synthese und Reaktivität von Boryldiazenidokomplexen T1 - Synthesis and Reactivity of Boryldiazenido Complexes N2 - Die vorliegende Arbeit befasst sich mit der Synthese, Charakterisierung und Reaktivität von Boryldiazenidokomplexen. Im ersten Abschnitt wird die Synthese von neuartigen Boryldiazenidokomplexen behandelt. Im zweiten Teil werden Studien zu den Reaktivitäten dieser Verbindungen gegenüber Elektrophilen, Lewis-Basen sowie Reaktionen an den Element-Halogen-Bindungen vorgestellt. N2 - The present work deals with the synthesis, characterization and reactivity of boryldiazenido complexes. In the first section, the synthesis of novel boryldiazenido complexes is discussed. In the second part, studies on the reactivities of these compounds toward electrophiles, Lewis bases, and reactions at the element-halogen bonds are presented. KW - Übergangsmetallkomplexe KW - Diazenidokomplexe KW - Bor KW - Distickstoffkomplexe KW - Boryldiazenidokomplexe KW - Boryldiazenido Complexes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-247415 ER - TY - THES A1 - Rang, Maximilian T1 - Metallähnliche Reaktivität \(in\) \(situ\) erzeugter Borylene T1 - Metallomimetic reactivity of transiently generated borylenes N2 - Einfach Lewis-Basen stabilisierte Borylene wurden durch Reduktion in situ hergestellt und in Gegenwart von Kohlenstoffmonoxid oder Distickstoff umgesetzt. Die entstandenen Verbindungen wurden mittels NMR-, ESR-, UV/Vis- und IR-Spektroskopie sowie Einkristallröntgenstrukturanalyse charakterisiert. Im Zuge dessen konnten für die erhaltenen Spezies Eigenschaften ermittelt werden, die denen analoger Übergangsmetallkomplexe ähneln. Ferner konnten die zugrundeliegenden mechanistischen Vorgänge der Reaktionen durch gezielte Variation der Reaktionsparameter aufgeklärt werden. Zudem wurden Redoxverhalten und Reaktivitäten der isolierten Produkte in weiterführenden Studien näher untersucht. N2 - Mono(Lewis base)-stabilized borylenes were transiently generated by reduction and converted in the presence of carbon monoxide or dinitrogen. The resulting compounds were characterized by means of NMR, EPR, UV-vis and IR spectroscopy as well as X-ray diffraction analysis. The properties determined for the isolated species in the course of these investigations closely resemble those of analogous transition metal complexes. Furthermore, it was possible to elucidate the mechanistic processes underlying the reactions through systematic alteration of the reaction parameters. Additionally, the redox behaviour and reactivities of the isolated products were examined more closely. KW - Bor KW - Distickstoff KW - Kohlenstoffmonoxid KW - Borylene KW - niedervalente Borverbindungen KW - Distickstoff Aktivierung KW - Distickstoff Spaltung KW - Borylencarbonyle KW - Kohlenmonoxid KW - cAAC Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240465 ER - TY - THES A1 - Prieschl, Dominic T1 - Reaktivitätsstudien zu Diboranen(4) und NHC-stabilisierten µ-Hydridodiboranen(5) T1 - Reactivity studies of diboranes(4) and NHC-stabilised µ-hydrido diboranes(5) N2 - Die vorliegende Arbeit behandelt im ersten Abschnitt die Synthese und Reaktivität neuartiger Diborane(4). Ebenfalls wurde die Reaktivität von Dihalogendiboranen(4) gegenüber Phenylazid untersucht, wobei symmetrische Vertreter unter Beibehalt der B-B-Bindung die fünfgliedrigen B2N3 Heterocyclen 14 und 15 lieferten. Der zweite Abschnitt dieser Arbeit beschäftigt sich mit der unerwarteten Reaktivität der NHC-stabilisierten μ-Hydridodiborane(5) XXIII und XXIV. Der abschließende Teil dieser Arbeit befasst sich mit den ersten Versuchen zur Darstellung eines CAAC-stabilisierten, Diboranyl-substituierten Borylens. N2 - The first part of this thesis focuses on the synthesis and reactivity of novel diboranes(4). Furthermore, the reactivity of dihalodiboranes(4) towards phenyl azide was investigated. Symmetrical derivatives Ia and IIb gave five-membered B2N3 heterocycles 14 and 15 with retention of the B-B bond. The second chapter of this work deals with the unexpected reactivity of NHC-stabilized μ-hydridodiboranes(5) XXIII and XXIV. The final part of this thesis focuses on the first attempts to synthesize a CAAC-stabilised, diboranyl-substituted borylene. KW - Diborane KW - Diborane(4) KW - diboranes(4) KW - Diborane(5) KW - diboranes(5) KW - sp2-sp3 KW - Bor KW - boron Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210749 ER - TY - THES A1 - Paprocki, Valerie Indra Katharina T1 - Synthese und Reaktivität neuartiger Komplexe mit carbo- und heterocyclischen pi-Liganden T1 - Synthesis and reactivity of novel complexes featuring carbo- and heterocyclic pi-ligands N2 - Die vorliegende Arbeit befasst sich mit der Synthese, Charakterisierung und Reaktivität von Nebengruppen-Metallkomplexen, die mindestens einen pi-koordinierenden Liganden tragen. Im ersten Abschnitt liegt der Fokus auf heteroleptischen Systemen mit carbocyclischen Liganden, zu deren Synthese die gängige Methodik der Salzeliminierung herangezogen wird. Das Metallierungsverhalten dieser Komplexe, sowie die Reaktivität von Komplexen mit reduktionsstabilen funktionellen Gruppen an den Ligandensystemen wird untersucht. Der zweite Abschnitt behandelt die Redox- und Koordinationseigenschaften des CAAC-stabilisierten 1,4 Diborabenzols, wobei Alkali-Metalle, Gruppe 10 Metalle, Lanthanoide, sowie die Actinoide Thorium und Uran untersucht werden. N2 - The present work deals with the synthesis, characterization and reactivity studies of subgroup metal complexes bearing at least one sandwich-type carbo- or heterocyclic ligand. The first chapter covers studies on the synthesis of heteroleptic sandwich complexes employing the well-established salt-metathesis strategy. The metalation properties as well as the reactivity of the complexes is investigated. The second chapter of this work discusses further studies on the redox and coordination properties of neutral, CAAC-stabilized 1,4-diborabenze. To this end reactions with alkali and group 10 metals, elements of the lanthanides as well as the actinide metals Thorium and Uranium are reviewed. KW - Sandwich-Verbindungen KW - Metallierung KW - Diborabenzolderivate KW - Thorium KW - Uran KW - Sandwich Komplexe KW - Diborabenzol Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-193707 ER - TY - THES A1 - Okorn, Alexander T1 - Synthese und Reaktivität von PAH-substituierten Diborenen und Dihydroanthracendiyl-verbrückten Diborverbindungen T1 - Synthesis and Reactivity of PAH-substituted Diborenes and Dihydroanthracendiyl-bridged Diboroncompounds N2 - Die vorliegende Arbeit beschäftig sich mit der Synthese und Reaktivität von Phosphan-stabilisierten Diborenen, die auf Grund ihres Substitutionsmusters über ein erhöhtes Reaktivitätsvermögen verfügen. Der erste Teil dieser Arbeit beschreibt die Synthese von polycyclischen aromatischen Kohlenwasserstoff (PAH)-substituierten, Trimethylphosphan-stabilisierten Diborenen. Im zweiten Abschnitt dieser Arbeit wird die Synthese von Diborenen beschrieben, welche in einer Dihydroanthracendiyl-verbrückten Ringstruktur eingebunden sind. N2 - The work deals with the synthesis and reactivity of phosphine-stabilised diborenes with increased reactivity due to their substitution pattern. The first part describes the synthesis of polycyclic aromatic hydrocarbon (PAH)-substituted, trimethylphosphine-stabilised diborenes.The second part of this work describes the synthesis of strained diborenes, which are incorporated into a dihydroanthracenediyl-bridged ring structure. KW - Diborene Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348368 ER - TY - THES A1 - Nutz, Marco T1 - Synthese und Reaktivität terminaler Arylborylenkomplexe der Gruppe 6 T1 - Syntheses and reactivity of terminal Arylborylen complexes of Group 6 N2 - Die Synthese unterschiedlicher terminaler Gruppe 6 Borylenkomplexe wurde durchgeführt. Dabei wurden neben NMR- und IR-spektroskopischen Untersuchungen, die Identitäten der Verbindungen mittels Röntgenkristallographie festgestellt. Ferner wurden Studien zur Reaktivität des nucleophilen Borzentrums in diesen Verbindungen durchgeführt und die erhaltenen Reaktionsprodukte ebenfalls durch die oben genannten Spektroskopiemethoden charakterisiert. Dabei lag das Augenmerkt besonders auf der Darstellung von monovalenten Borverbindungen, sowie Verbindungen mit Bor-Element-Mehrfachbindungen. N2 - Synthesis and reactivity of group 6 arylborylene complexes. Characterization via NMR, IR spectroscopy and X-Ray analysis. KW - Borylene KW - Borylenkomplexe KW - Bor-Übergangsmetallkomplexe KW - Borkomplexe Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154859 ER - TY - THES A1 - Nees, Samuel T1 - Synthese und Reaktivität von niedervalenten Aluminium-Phosphor-Verbindungen T1 - Synthesis and reactivity of low-valent aluminum-phosphorus-compounds N2 - Die vorliegende Arbeit beschäftigt sich mit der Darstellung und Reaktivität von Cp substituierten Aluminium(I)-Verbindungen. Außerdem konnten die ersten Vertreter für planare Cyclopenten-4-yl-Kationen dargestellt werden. Die Reaktivität von Cp3tAl(I), [AlCp*]4 und DipNacNacAl wurde gegenüber Cyclotriphosphiranen untersucht. In Abhängigkeit vom sterischen Anspruch der Substituenten am Phosphor- und Aluminiumatom wurden hierbei verschiedenartige AlP-Ringsysteme erhalten. Desweiteren wurden Phospha-Wittig-Reagenzien als Phosphinidenquelle für die Umsetzung mit Aluminium(I)-Spezies getestet, wobei verschiedene 3- und 4 gliedrige Strukturmotive erhalten werden konnten. Bei Erhöhung der Sterik am Phospha-Wittig-Reagenz zu einem DipTer-Substituenten konnte im Fall der Umsetzung mit [AlCp*]4 der ersten Vertreter eines Phosphaalumens dagestellt werden. In ersten Reaktivitätsstudien mit ungesättigten Substraten konnten für Doppelbindungssysteme charakteristische Additionsreaktionen nachgewiesen werden. N2 - The present work deals with the preparation and reactivity of Cp substituted aluminum(I) compounds. In addition, the first representatives for planar cyclopenten-4-yl cations could be presented. The reactivity of Cp3tAl(I), [AlCp*]4 and DipNacNacAl was investigated towards cyclotriphosphiranes. Depending on the steric demand of the substituents on the phosphorus and aluminum atom, different AlP ring systems were obtained. Furthermore, phospha-Wittig reagents were tested as a phosphinide source for the reaction with aluminum(I) species, and various 3- and 4-membered structural motifs were obtained. Upon increasing the steric on the phospha-Wittig reagent to a DipTer substituent, the first representative of a phosphaalumene was digested in the case of the reaction with [AlCp*]4. In first reactivity studies with unsaturated substrates, addition reactions characteristic for double bond systems could be detected. KW - Niedervalente Verbindungen KW - Aluminium KW - Phosphor KW - Mehrfachbindung KW - Cyclische Verbindungen KW - Cyclopenten-4-yl-Kationen KW - Aluminium(I)-Verbindungen KW - Cyclotriphosphiran KW - Phospha-Wittig-Reagenz KW - Koordinativ ungesättigte Verbindungen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-292848 ER - TY - THES A1 - Müssig, Jonas Heinrich T1 - Synthese und Reaktvität von Gruppe 13 Elementhalogeniden gegenüber metallischen und nicht-metallischen Lewis-Basen T1 - Synthesis and Reactivity of Group 13 Elemental halides towards Metal and Nonmetal Lewis-Bases N2 - Im Rahmen der vorliegenden Arbeit wurden Dibortetrahalogenide dargestellt, deren Eigenschaften strukturell sowie spektroskopisch analysiert und deren Reaktivität gegenüber Lewis-basischen Hauptgruppenelementverbindungen untersucht. Durch anschließende Reaktivitätsstudien konnten unter anderem neuartige Diborene dargestellt und analysiert werden. Weiterhin wurde die Verbindungsklasse der Elementhalogenide der Gruppe 13 in der Oxidationsstufe +2 (B, Ga, In) und +3 (In) bezüglich ihrer Reaktivität gegenüber Übergangsmetall Lewis-Basen untersucht. Die gebildeten, neuartigen Bindungsmodi der Gruppe 13 Elemente am Übergangsmetall wurden strukturell, spektroskopisch sowie quantenchemisch analysiert. N2 - As a part of the present work diborontetrahalides were synthesized, analyzed and their reactivity was investigated towards Lewis-basic main group compounds. Subsequent reactivity studies were performed and novel Diborenes were synthesized and analyzed. Furthermore the reactivity of group 13 elemental halides in the oxidation state +2 (B, Ga, In) and +3 (In) was investigated towards Lewis-basic transition metal complexes. The novel bonding motifs of the group 13 elements at the metal center were investigated structurally, spectroscopically and by quantum chemical calculations. KW - Übergangsmetallkomplex KW - Bor KW - Lewis-Base KW - Gallium KW - Indium KW - Gruppe 13 element KW - Diboren Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-179831 ER - TY - THES A1 - Mies, Jan T1 - Ansa-Verbindungen von Pianostuhlkomplexen der Übergangsmetalle und Alkinanaloge Verbindungen des Bors — Darstellung und Reaktivitätsstudien T1 - Ansa-halfsandwich complexes of piano stool transition metal complexes and alkyne-type compounds of boron - synthesis and reactivity studies N2 - Im Rahmen dieser Arbeit konnten im Ersten Teil durch Anwendung verschiedener Synthesestrategien neuartige ansa-Halbsandwichkomplexe der sechsten, achten und zehnten Gruppe der Übergangsmetalle synthetisiert und umfassend charakterisiert werden. Die dargestellten Verbindungen wurden in Reaktivitätsstudien auf ihr Verhalten gegenüber Chalkogenen, sowie gegenüber niedervalenten späten Übergangsmetallkomplexen untersucht. Weiterhin wurden die erhalten Komplexe auf ihrer Eignung als mögliche Vorstufen für metallhaltige Polymere hin untersucht. Dabei wurden verschiedene Polymerisationsmethoden wie thermische, katalytische oder anionische induzierte Ringöffnungsreaktion eingesetzt und die erhaltenen Polymere mit Hilfe der Gelpermeations-Chromatographie auf ihr Molekulargewicht bzw. auf ihre Polydisperisität hin untersucht. Im zweiten Teil dieser Arbeit konnten verschiedene neuartige Basenaddukte von Tetrabromdiboran(4) dargestellt und charakterisiert werden. Durch schrittweise Reduktion gelang die Synthese basenstabilisierter neutraler Diborene auf einer bisher unbekannten Syntheseroute. Durch die erschöpfende Reduktion von [B2Br4(IDip)2] konnte erstmals ein basenstabilisiertes Diborin außerhalb einer inerten Edelgasmatrix isoliert und charakterisiert werden. Zum Verständnis der Bindungssituation sowie der Konstitution in Lösung und Festkörper wurden umfangreiche physikochemische und theoretische Studien angefertigt. Die erhaltenen Daten belegen die Synthese von [B2(IDip)2] mit einer Bindungsordnung von drei entlang der zentralen B2-Einheit. Es wurden umfangreiche Reaktivitätsstudien gegenüber verschiedenen Substraten durchgeführt. Die Umsetzung von [B2(IDip)2] mit CO lieferte ein basenstabilisiertes Bis-boralacton, bei dessen Bildung eine gänzlich unbekannte CO-Verknüpfungsreaktion auftritt, welche für Hauptgruppenelementverbindungen bisher nicht beobachtet werden konnte. Im Zuge mechanistischer Studien gelang der Nachweis eines Reaktionsintermediates. Weiterhin zeigt das Diborin [B2(IDip)2] (140) eine interessante Koordinationschemie gegenüber Kupfer(I)-Verbindungen. Dabei gelang die Darstellung von tri- und dinuklearen Kupfer(I)-Komplexen von [B2(IDip)2]. Diese wurden durch multinukleare NMR-Spektroskopie sowie mit Hilfe der Röntgenstrukturanalyse umfassend charakterisiert. N2 - Within the scope of this work, novel base adducts of phospanes and NHC ligands with tetrabromodiborane(4) were synthesized and fully characterized. Subsequent two electron-reduction of the latter yields novel base stabilized diborenes. Full reduction of [B2Br4(IDip)2] with four equivalents of sodium naphthalenide, yielded the diboryne [B2(IDip)2] which is the first example of a triply-bound B2 unit stable at ambient temperature. Crystallographic and spectroscopic characterizations confirmed that the latter is a halide-free linear system containing a boron-boron triple bond. In the course of reactivity studies of the diboryne towards various substrates a novel coupling reaction between [B2(IDip)2] and 4 CO-molecules was be observed, leading to a base-stabilized bis(bora)lactone which was isolated and fully characterized. Furthermore, an intermediat of the reaction pathway incorporating a single CO-molecule was isolated and characterized by X-ray diffraction and multinuclear NMR. Reactions with coinage-metal precusors lead to di and trinuclear coordination compounds. The geometry of both complexes were investigated by X-ray diffraction and multinuclear NMR. The bonding situation was studied by DFT-calculations. ... KW - Bor KW - Halbsandwich-Verbindungen KW - Dreifachbindung KW - Bor KW - Diborin KW - Ansa Halbsandwich Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93652 ER - TY - THES A1 - Meier, Michael T1 - Synthese und Eigenschaften von funktionalisierten Borolen und 1,2-Azaborininen T1 - Synthesis and properties of functionalized boroles and 1,2-azaborinines N2 - Im Rahmen dieser Arbeit konnte das Portfolio an literaturbekannten, freien Bisborolen beträchtlich erweitert werden. Die Reihe der Oligothiophen-verbrückten Borole konnte um die Vertreter der Ter- bzw. Quaterthiophene erweitert werden. Weiterhin wurden Lewisbasenaddukte mit IMes, CAAC und DMAP dargestellt und zur röntgenspektrographischen Charakterisierung herangezogen. Durch den Vergleich der spektroskopischen Daten mit den bereits literaturbekannten Vertretern wurde eine schrittweise Entwicklung der Absorptionsmaxima in Abhängigkeit der Anzahl der Thienyleinheiten detektiert. Daraus konnte sowohl auf eine Verkleinerung der HOMO-LUMO-Abstände mit zunehmender Kettenlänge, als auch die Entwicklung zu einem Grenzwert bei einer hypothetisch unendlichen Kettenlänge geschlossen werden, welcher sich bei ca. ca. 2,40 eV befindet. Weiterhin wurden 9,9-Dimethylfluoren und Biphenyl erfolgreich zu Bisborolen umgesetzt. Beide Systeme sind aufgrund ihrer strukturellen Gemeinsamkeiten sowie ihrer Vergleichbarkeit mit literaturbekannten Bis(borolyl)benzol - Verbindungen von besonderem Interesse. Zudem konnte ein Vergleich der spektroskopischen Daten aller literaturbekannten und im Rahmen dieser Arbeit dargestellten Bisborole bewerkstelligt werden. Es wurde somit gezeigt, dass heteroaromatisch-verbrückte Bisborole eine größere energetische HOMO-LUMO-Lücke aufzeigen, als aromatisch-verbrückte Systeme. Zudem spielt die Position der Borolylgruppen und der damit verbundene Grad an pi-Interaktionen eine wichtige Rolle. Die beiden im Rahmen dieser Arbeit dargestellten Systeme 1,1'-(9,9-Dimethylfluoren-2,7-diyl)bis-(2,3,4,5-tetraphenylborol) und 4,4'-Bis(2,3,4,5-tetraphenylborol-1-yl)-1,1'-biphenyl reihen sich energetisch zwischen dem 1,3- bzw. 1,4-Bis(2,3,4,5-tetraphenylborol-1-yl)benzol ein. Insbesondere der Vergleich zwischen 1,4-Bis(2,3,4,5-tetraphenylborol-1-yl)benzol und 4,4'-Bis(2,3,4,5-tetraphenylborol-1-yl)-1,1'-biphenyl offenbart keine signifikante Energiedifferenz zwischen einer Phenyl- und einer Biphenylbrücke, was ein Indiz dafür darstellt, dass die Erweiterung des Spacers um eine zweite Phenyleinheit bei analoger 1,4-Verknüpfung nahezu keinen Einfluss auf die elektronischen Eigenschaften des Systems hat. Auch die Überführung von 1,1'-(9,9-Dimethylfluoren-2,7-diyl)bis-(2,3,4,5-tetraphenylborol) und 4,4'-Bis(2,3,4,5-tetraphenylborol-1-yl)-1,1'-biphenyl in die entsprechenden 1,2-Azaborinine wurde unter Verwendung von Trimethylsilylazid bewerkstelligt. Neben der Darstellung und Untersuchung neuer Bisborole wurde 9-(Thiophen-2-yl)carbazol erfolgreich für den Aufbau borhaltiger Donor-Akzeptor-Systeme eingesetzt. Es konnten im Zuge dessen ein Borol und dessen IMes-Addukt, ein 1,2-Azaborinin sowie ein Dimesitylboryl-substituiertes Derivat dargestellt und auf ihre optischen und elektronischen Eigenschaften hin untersucht werden. Dabei stand insbesondere die elektrochemische Quantifizierung der Elektronenakzeptorstärke des Borols im Vergleich zum Dimesitylboran im Fokus. Es wurde ein signifikanter Unterschied des Borols (Epc = -1.60 V, CH2Cl2) im Vergleich zum Dimesitylboran (E1/2 = -2.39 V, THF) detektiert, woraus eine deutlich höhere Akzeptorstärke des Borols abgeleitet werden kann. Zusätzlich wurden spektroskopische und photophysikalische Untersuchungen in Abhängigkeit der jeweiligen Verbindung durchgeführt. Durch den Vergleich des energetisch niedrigsten Absorptionsmaximas des Borols mit bereits literaturbekannten, thienylsubstituierten Borolen konnte ein signifikanter Donoreinfluss der Carbazoleinheit bestätigt werden. N2 - Within the scope of this thesis, a library of novel, free bisborole compounds was prepared, characterized and their spectroscopic properties examined. Oligothiophen-bridged bisboroles could be extended to ter- and quaterthiophenes. Furthermore, Lewis base adducts with IMes, cAAC and DMAP were synthesized and characterized by X-ray crystallography. By comparing the spectroscopic data with literature-known compounds, a successive increase in the absorption maxima with the number of thiophene units could be observed/identified. Extension of the chain length leads to an increasingly smaller HOMO-LUMO gap and a limiting value of 2.40 eV considering a hypothetically infinitely long thiophene spacer. Furthermore, 9,9-dimethylfluorene and biphenyl were successfully converted into bisboroles. Both systems are of special interest due to their structural similarities and comparability to the literature-known Bis(borolyl)benzene - compounds. Additionally, a spectroscopic comparison between all new and literature-known bisboroles could be achieved during this work. It was shown that heteroaryl-brigded bisboroles offer a larger HOMO-LUMO gap then aryl-brigded systems. Furthermore the position of the borolyl groups and the degree of pi-conjugation play an important role. Both systems 1,1'-(9,9-dimethylfluorene-2,7-diyl)bis-(2,3,4,5-tetraphenylborole) and 4,4'-bis(2,3,4,5-tetraphenylborole-1-yl)-1,1'-biphenyl are found to be energetically between 1,3- and 1,4-bis(2,3,4,5-tetraphenylborole-1-yl)benzene. The comparison between 1,4-bis(2,3,4,5-tetraphenylborole-1-yl)benzene and 4,4'-bis(2,3,4,5-tetraphenylborole-1-yl)-1,1'-biphenyl shows almost no difference in energy between a phenyl- and biphenyl-bridged system, indicating that expanding the system with another phenyl unit with the same 1,4-linkage has virtually no influence on the electronic properties. Additionally, the conversion of 1,1'-(9,9-dimethylfluorene-2,7-diyl)bis-(2,3,4,5-tetraphenylborole) and 4,4'-bis(2,3,4,5-tetraphenylborole-1-yl)-1,1'-biphenyl into the corresponding 1,2-azaborinines was achieved by reaction with trimethylsilyl azide. Besides the synthesis and investigation of new bisborole compounds, 9-(thiophen-2-yl)carbazole was successfully converted into new donor-acceptor-systems. Based on this system, a borole, an IMes-adduct, an 1,2-azaborinine and also a dimesitylboryl-substituted derivative were successfully prepared, characterized and investigated for their optical and electronic properties, with focus on the electrochemical quantification of the Lewis acid strength of the borole and the dimesitylborane. A significant difference in the first reduction potentials was detected between the borole (Epc = 1.60 V, CH2Cl2) and the dimesitylborane (E1/2 = -2.39 V, THF), indicating a much higher acceptor strength of borole. Additionally, spectroscopic and photophysical investigations were performed on each of these compounds. By comparison of the lowest maximum of the borole with literature-known, thienyl-substituted boroles, a significant donor influence of the carbazole group could be confirmed. KW - Borheterocyclen KW - Fünfringheterocyclen KW - Lewis-Säure KW - Sechsringverbindungen KW - Aromatische Verbindungen KW - Borole KW - 1,2-Azaborinine KW - Donor-Brücke-Akzeptor Systeme KW - Bisborole KW - Thiophen KW - boroles KW - 1,2-azaborinines KW - donor–bridge–acceptor systems KW - bisboroles KW - thiophene Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178402 ER - TY - THES A1 - Matthes, Philipp Robert T1 - Neue Ln-N-Koordinationspolymere und MOFs als Hybridmaterialien für effektive Lumineszenz und neuartige Phosphore T1 - New Ln-N-coordination polymers and MOFs as hybrid materials for effective luminescence and new phosphors N2 - In der vorliegenden Arbeit wird die Darstellung und Charakterisierung von Komplexen, Koordinationspolymeren und MOFs auf der Basis von dreiwertigen Lanthanidchloriden und verschiedenen verbrückenden Azin- und Diazin-Liganden beschrieben. Ziel war es neuartige Koordinationspolymere mit effektiven Photolumineszenzeigenschaften zu generieren. Es konnten 44 neue organisch-anorganische Hybridmaterialien präsentiert werden. Der Fokus der Arbeit lag neben der strukturellen Charakterisierung auf der Bestimmung der Photolumineszenzeigenschaften und der Betrachtung der thermischen Eigenschaften der Verbindungen. Bei solvothermalen Reaktionen von wasserfreien Lanthanidchloriden mit den Liganden 4,4‘-Bipyridin (bipy) und Pyridin (py) konnten die dinuklearen Komplexe [Ln2Cl6(bipy)(py)6] mit Ln = Y, Pr, Nd, Sm-Yb, die strangartigen Koordinationspolymere 1∞[LnCl3(bipy)(py)2]·(py) mit Ln = Gd-Er, Yb und 1∞[Lu2Cl5(bipy)2 (py)4]1∞[LuCl4(bipy)], sowie das 2D-Netzwerk 2∞[Ce2Cl6(bipy)4]·(py) synthetisiert und mithilfe der Röntgeneinkristallstrukturanalyse charakterisiert werden. Spektroskopische Untersuchungen an den Verbindungen ergaben außergewöhnliche Photolumineszenzeigenschaften auf der Basis von Ln3+-Ionen mit Emissionen im UV-VIS und NIR-Bereich. Im Falle des dinuklearen Komplexes konnten mithilfe der Ionen Y3+, Gd3+, Tb3+ und Eu3+ Lichtemission in den RGB-Grundfarben generiert werden. Der Einfluss salzsaurer Bedingungen führt zur Bildung der pyridiniumhaltigen Nebenphasen [Hpy]1∞[LnCl4(bipy)] mit Ln = Y, Tb), Yb, Lu, [Hpy]22∞[Sm2Cl8(bipy)3]·2(py) und [Hdpa] [EuCl4(dpa)]. Unter der Verwendung einer Schmelzsyntheseroute wurden die Verbindungen 3∞[La2Cl6(bipy)5] ·4(bipy) 2∞[Ln2Cl6(bipy)3]·2(bipy) mit Ln = Nd, Sm-Dy, Er, Yb und eine Dotierreihe mit Ln = Gd2-x-yEuxTy (x,y = 0-1), welche vor einigen Jahren im Arbeitskreis von Prof. Müller-Buschbaum et al. entdeckt wurden, dargestellt. Der Fokus der Arbeit lag hierbei auf der Bestimmung der Photolumineszenzeigenschaften der Netzwerke, wobei vor allem bei der Dotierreihe unter der Verwendung von Ln3+-zentrierter Emission ein stufenloses Farbtuning der Emissionsfarbe von grün nach rot erreicht werden konnte. Zusätzlich wurden an diesen Verbindungen systematische Untersuchungen zur strukturellen Aufklärung, der bei höheren Temperaturen entstehenden Netzwerk- und Gerüstverbindungen, durchgeführt. Hierbei konnten Kondensationsprodukte wie 3∞[LaCl3(bipy)], 2∞[Ln3Cl9(bipy)3] mit Ln = Pr, Sm, 2∞[Ho2Cl6(bipy)2] und 2∞[Gd2Cl6(qtpy)(bpy)]·(bipy) strukturell aufgeklärt werden. Die Übertragung der solvothermalen Syntheseroute unter der Verwendung von Pyridin auf die gegenüber bipy verlängerten Azin-Liganden Dipyridylethen (dpe) bzw. –ethan (dpa) erwies sich als erfolgreich und resultierte in eine Erweiterung der Strukturchemie durch die Darstellung der lumineszierenden Koordinations-polymere 2∞[La2Cl6(dpe)3(py)2]·(dpe), 1∞[LnCl3(dpe)(py)2]·0.5(dpe)0.5(py) mit Ln = Eu, Gd, Er, 2∞[LaCl3(dpa)2]·(dpa) und 1∞[LnCl3(dpa)(py)2]·0.5(dpa)0.5(py) mit Ln = Gd, Er. Eine Verkürzung des bipy-Liganden in Form der Di-Azinen wie Pyrazin (pyz), Pyrimidin (pym) und Pyridazin (pyd) und deren Umsetzung mit LnCl3 führte zur Bildung von Komplexen und polymeren Strukturen wie 3∞[LaCl3(pyz)], [Ln2Cl6(pyz)(py)6]·2(pyz) mit Ln = Sm, Er, 1∞[Sm2Cl6(μ-pym)2(pym)3]·(pym), [Er2Cl6(pym)6] und [ErCl3(η-pyd)(pyd)2] mit Lumineszenzeigenschaften auf der Basis der jeweiligen Liganden und Ln3+-Ionen. N2 - The present work is about the synthesis and characterization of complexes, coordination polymers and MOFs based on trivalent lanthanidechlorides and different bridging azine and diazine ligands. The creation of new coordination polymers with effective photoluminescent properties was a main goal of this thesis. Therefore, 44 new organic-inorganic hybrid-materials are presented in this work. Main focus of investigation was on structural characterization and determination of photoluminescence and thermal properties of the synthesized compounds. Solvothermal reactions of anhydrous lanthanidechlorides with the ligand 4,4‘-bipyridine (bipy) and pyridine (py) lead to dinuclear complexes [Ln2Cl6(bipy)(py)6] with Ln = Y, Pr, Nd, Sm-Yb, strand-like coordination polymers 1∞[LnCl3(bipy)(py)2]·(py) with Ln = Gd-Er, Yb and 1∞[Lu2Cl5(bipy)2(py)4]1∞[LuCl4(bipy)] and also 2D-networks like 2∞[Ce2Cl6(bipy)4]·(py) could be obtained and characterized by single-crystal-X-ray-stucture-determination. Spectroscopic investigations revealed extraordinary photoluminescence properties based on Ln3+-ions with light emission in the UV-VIS and NIR range. Especially the dinuclear complexes containing Y3+, Gd3+, Eu3+ and Tb3+ ions showed the RGB basic colors, allowing color tuning in the visible range. The influence of hydrochloric conditions lead to the formation of the pyridinium containing side phases [Hpy]1∞[LnCl4(bipy)] with Ln = Y, Tb, Yb, Lu, [Hpy]22∞[Sm2Cl8(bipy)3]·2(py) and [Hdpa]1∞[EuCl4(dpa)]. Furthermore, the compounds 3∞[La2Cl6(bipy)5]·4(bipy), 2∞[Ln2Cl6(bipy)3]·2(bipy) with Ln = Nd, Sm-Dy, Er, Yb and a solid solution with Ln = Gd2-x-yEuxTy (x,y = 0-1), which were discovered in the research group of Prof. Müller-Buschbaum et al., were synthesized by using a melt-synthesis route. Hereby, the emphasis was on the investigation of photoluminescence properties of the networks, most notably the color tuning properties based on Ln3+centered emission of the solid solution in the color range from green to red. Additionally, systematic investigations were performed on the networks for the determination of high-temperature dependent structural changes, leading to the structural characterization of the structural condensation products 3∞[LaCl3(bipy)], 2∞[Ln3Cl9(bipy)3] with Ln = Pr, Sm, 2∞[Ho2Cl6(bipy)2] and 2∞[Gd2Cl6(qtpy)(bipy)]·(bipy). The transfer of the solvothermal reaction route with the use of pyridine as solvent on the ligands dipyridylethene (dpe) and -ethane (dpa) was successful, also leading to luminescent coordination polymers in 2∞[La2Cl6(dpe)3(py)2]·(dpe), 1∞[LnCl3(dpe)(py)2]·0.5(dpe)0.5(py) wih Ln = Eu, Gd, Er, 2∞[LaCl3(dpa)2]·(dpa) and 1∞[LnCl3(dpa)(py)2]·0.5(dpa)0.5(py) with Ln = Gd, Er. The shortening of the bipy ligand by using diazines, like pyrazine (pyz), pyrimidine (pym) and pyridazine (pyd) as connector ligands, resulted in the extension of coordination compounds based on LnCl3 and diazine building blocks. Therefore, complexes and coordination polymers like 3∞[LaCl3(pyz)], [Ln2Cl6(pyz)(py)6]·2(pyz) with Ln = Sm, Er, 1∞[Sm2Cl6(μ-pym)2(pym)3]·(pym), [Er2Cl6(pym)6] and [ErCl3(η-pyd)(pyd)2] were discovered and characterized. Furthermore, first basic luminescence properties of the used ligands and their interaction with Ln3+-ions were investigated. KW - Lanthanoide KW - Metallorganisches Netzwerk KW - Polymerkomplexe KW - Photolumineszenz KW - Leuchtstoff KW - Lanthanoide KW - MOF KW - Koordinationspolymer KW - Azine / Diazine KW - Photolumineszenz KW - lanthanides KW - coordination polymer KW - metal-organic frameworks KW - photoluminescence KW - azines / diazines Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-109519 ER - TY - THES A1 - Matler, Alexander T1 - Synthese und Reaktivität von Übergangsmetall-stabilisierten und Lewis-basenstabilisierten Borylenen T1 - Synthesis and reactivity of transition metal-stabilized and Lewis base-stabilized borylenes N2 - Die vorliegende Arbeit befasst sich im ersten Teil mit der Reaktivität von Gruppe 8 Borylenkomplexen. Zunächst wurde der Eisenborylenkomplex 71 mit verschiedenen Carbodiimiden umgesetzt. Die entstandenen Produkte in Form von Spiroverbindungen, [2+2]-Cycloadditionsprodukten sowie Diazadiboretidinen konnten strukturell und spektroskopisch untersucht werden. Außerdem wurde 71 mit Aziden umgesetzt, was NMR-spektroskopisch zur Bildung von Tetrazaborolen führt. Der Eisenbis(borylen)komplex 72 wurde ebenfalls mit Carbodiimiden umgesetzt und die entstandenen Verbindungen, unter anderem Diazadiboretidine, strukturell und spektroskopisch untersucht. Eine Umsetzung von 72 mit Stickstoffbasen wie Azobenzol, 2,2'-Bipyridin oder Pyridazin führte bei letzterem zur Bildung eines Koordinationsprodukts. Während die Umsetzungen des Eisentetrakis(borylen)komplexes 73 mit Methylisocyanid, Magnesium und Trimethylphosphan zu Zersetzung führten, konnten mit Bis(piperidyl)acetylen und Diisopropylcarbodiimid keine Umsetzungen festgestellt werden. Nach Aufnahme eines UV/Vis- und CV-Spektrums des Eisentetraborkomplexes 74 wurde versucht, diesen mit diversen Erd- und Erdalkalimetallverbindungen zu reduzieren. Hierbei konnte entweder keine Reaktion oder Zersetzung festgestellt werden. Weitere Umsetzungen von 74 erfolgten mit unterschiedlichen Lewis-Basen, Stickstoffbasen, Säuren, Gasen, Chalkogenen, DIC und einer Platin(0)-verbindung. Diese Umsetzungen führten zu keinen identifizierbaren Produkten. Im zweiten Teil dieser Arbeit wurde die Synthese und Reaktivität des basenstabilisierten Borylens 89 untersucht. Nach Verbesserung der Synthesebedingungen konnte ein photolytisch induzierter Ligandenaustausch des CO-Liganden mit verschiedenen Substraten durchgeführt werden. Hierbei führten die Umsetzungen mit Carbenen oder Phosphanen in Abhängigkeit derer sterischer Eigenschaften zu den entsprechenden Adduktverbindungen. Außerdem konnte eine Adduktverbindung mit Schwefel dargestellt werden, während eine Umsetzung mit Selen nur zur Zersetzung führte. Die Umsetzung mit DMAP lieferte im Gegensatz zur den vorherigen Adduktverbindungen ein biradikalisches Produkt, welches durch ESR-Messung charakterisiert werden konnte. Eine lösungmittelabhängige Reaktion findet mit Trifluorophosphan statt, mit welchem die entsprechende instabile Borylenverbindung NMR-spektroskopisch untersucht werden konnte. Die Borazidspezien 169 und 170 sowie das Aminoboran 171 konnten durch Umsetzung von 89 mit Mesityl- und Phenylazid generiert und vollständig charakterisiert werden. In Anlehnung an die Synthese von Fischercarbenkomplexen wurde 89 mit Organometallverbindungen umgesetzt, um die Reaktivität des CO-Liganden zu erforschen. Nach Umsetzungen mit Phenyllithium, Methyllithium oder Benzylkalium erfolgte die Methylierung in situ mittels Methyltriflat oder dem Meerwein-Salz [Me3O][BF4]. Die entstandenen Fischercaben-analogen Verbindungen konnten strukturell und spektroskopisch charakterisiert werden. N2 - The present work deals in the first part with the reactivity of group 8 borylene complexes. First, the iron borylene complex 71 was reacted with various carbodiimides. The resulting products in the form of spiro compounds, [2+2]-cycloaddition products as well as diazadiboretidines could be studied structurally and spectroscopically. In addition, 71 was reacted with azides, leading to the formation of tetrazaboroles by NMR spectroscopy. The iron bis(borylene) complex 72 was also reacted with carbodiimides and the resulting compounds, including diazadiboretidines, were studied structurally and spectroscopically. Reaction of 72 with nitrogen bases such as azobenzene, 2,2'-bipyridine, or pyridazine led to the formation of a coordination product in the latter. While reactions of the iron tetrakis(borylene) complex 73 with methyl isocyanide, magnesium and trimethylphosphane led to decomposition, no reactions were detected with bis(piperidyl)acetylene and diisopropylcarbodiimide. After recording a UV/Vis and CV spectrum of the iron tetraboron complex 74, attempts were made to reduce it with various earth and alkaline earth metal compounds. Here, either no reaction or decomposition was observed. Further reactions of 74 were carried out with various Lewis bases, nitrogen bases, acids, gases, chalcogens, DIC, and a platinum(0) compound. These reactions did not lead to any identifiable products. In the second part of this work, the synthesis and reactivity of the base-stabilized borylene 89 was investigated. After improvement of the synthesis conditions, photolytically induced ligand exchange of the CO ligand with different substrates could be performed. Here, the reactions with carbenes or phosphanes led to the corresponding adduct compounds depending on their steric properties. In addition, an adduct compound with sulfur could be presented, while a reaction with selenium only led to decomposition. In contrast to the previous adduct compounds, the reaction with DMAP gave a biradical product, which could be characterized by ESR measurement. A solvent-dependent reaction occurs with trifluorophosphane, with which the corresponding unstable borylene compound could be studied by NMR spectroscopy. The borazide species 169 and 170 as well as the aminoborane 171 could be generated and fully characterized by reacting 89 with mesityl and phenyl azide. Following the synthesis of Fischer carbene complexes, 89 was reacted with organometallic compounds to explore the reactivity of the CO ligand. After reactions with phenyllithium, methyllithium or benzyl potassium, methylation was carried out in situ using methyl triflate or the Meerwein salt [Me3O][BF4]. The resulting Fischercaben-analogous compounds could be characterized structurally and spectroscopically. KW - Borylene KW - Borylenkomplexe KW - Bor-Übergangsmetallkomplexe KW - Borkomplexe KW - Lewis-basenstabilisierte Borylene KW - Lewis base-stabilized borylene Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240184 ER - TY - THES A1 - Mailänder, Lisa T1 - Darstellung neuer Borheterocyclen durch Umsetzung von Borolen mit 1,3-dipolaren Reagenzien T1 - Synthesis of new boron heterocycles by reaction of boroles with 1,3-dipolar reagents N2 - Darstellung neuer Borheterocyclen durch Umsetzung von Borolen mit 1,3-dipolaren Reagenzien. Bei der Usetzung von Borolen mit Aziden, Diazoalkanen und Nitronen kam es zu Ringerweiterungsreaktionen und zur Bildung von neuen Borheterocyclen (z.B. 1,2-Azaborinine, 1,2-Azaborinin-substituierte Azofarbstoffe, Boracyclohexadiene, Oxazaborocine). N2 - Synthesis of new boron heterocycles by reaction of boroles with 1,3-dipolar reagents KW - Borole KW - Heterocyclische Verbindungen KW - Dipol <1,3-> KW - Ringerweiterungsreaktionen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127147 ER - TY - THES A1 - Macha, Bret B. T1 - Boron-Containing Aromatics as Communicating and Communicative Units in π-Conjugated Systems T1 - Borhaltige Aromaten als Kommunikations-vermittelnde Einheiten in π-konjugierten Systemen N2 - Project Borylene A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new “first generation” unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence. Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand’s coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state. Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new “second generation” borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively. Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions: [1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex. [2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center. [3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals. Project Borirene The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring. A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions. Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex’s photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable. A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species. Project Boratabenzene The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings. This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, and E\(_{1/2}\)(4) = −2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/–1}\), and [(189)]\(^{–1/–2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge. While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes. Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed. N2 - Projekt: Borylene Ein neuer Borylen-Ligand ({BN(SiMe\(_3\))(t-Bu)}) konnte dargestellt werden, der terminal an Metallfragmente der Form [M(CO)\(_5\)] (M = Cr, Mo, und W) bindet. Die Komplexe [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), und [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) konnten durch doppelte Salzeliminierung von Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), und W (12)) mit dem Dihalogenboran Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18) erfolgreich dargestellt werden (Abbildung 6-1). Der neue, unsymmetrische Borylen-Ligand der “ersten Generation” ist eng verwandt mit dem Bis(trimethylsilyl)aminoborylen-Liganden, zu dem er, wie gezeigt werden konnte, ähnliche Strukturmerkmale und Reaktivitäten aufweist. Der unsymmetrische Borylen-Ligand {BN((SiMe\(_3\))(t-Bu)} zeigt jedoch auch einige Besonderheiten. So verläuft der photolytische Transfer auf Übergangsmetallfragmente im Vergleich zum symmetrischen {BN(SiMe\(_3\))\(_2\)}-Liganden schneller, was ihn auf der Grundlage von NMR- und IR-spektroskopischen Daten zu einem reaktiveren Borylen macht. Photolytische Transferreaktionen des neuen Borylens ({BN((SiMe\(_3\))(t-Bu)}) mit verschiedenen Metallkomplexen verlaufen entweder unter vollständigem oder teilweisem Transfer zu verbrückenden Borylen-Komplexen. Im Falle von Lewis-aciden, frühen Übergangsmetallkomplexen (bis zur Gruppe 6) wird eine terminale Koordination bevorzugt. Bei Lewis-basischen Übergangsmetallen (jenseits der Gruppe 9) hingegen scheint der verbrückende Koordinationsmodus energetisch bevorzugt zu sein. Es wurde beobachtet, dass bei Transferreaktionen anfänglich terminale Borylen-Komplexe gebildet werden, die sich in Komplexe mit verbrückenden Borylen-Liganden umlagern. Abbildung 6-2 gibt eine Übersicht über die durchgeführten Transferreaktionen zwischen der Chromborylen-Spezies [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) und den Übergangsmetallkomplexen [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). Bei diesen Umsetzungen konnten die Borylen-Komplexe der “zweiten Generation” [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), und [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62) erfolgreich erhalten werden. Eine Analyse der gesammelten spektroskopischen (NMR, IR) und strukturellen Daten erlaubt folgende Schlussfolgerungen für die terminalen Borylen-Komplexe: [1] Die NMR-spektroskopischen Daten für die Gruppe-6-Metall-Komplexe der “ersten Generation” ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) zeigen, dass die \(^{11}\)B{\(^1\)H}- und \(^{13}\)C{\(^1\)H}-NMR Signale für die Carbonyle bei Gang zu den schwereren Homologen zu höherem Feld verschoben sind. Daraus resultiert die größte Entschirmung der Kerne für den Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19). [2] Die Bor-Metall-trans-Kohlenstoff-Achse (B-M-C\(_{trans}\)) in den Borylen-Komplexen der “ersten Generation” [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20) und W (21)) ist nicht linear, was einen direkten Vergleich der IR-Schwingungsbanden miteinander verhindert. Die Chrom-Verbindung ist nahezu linear und zeigt die erwarteten drei IR-Schwingungsbanden für die Carbonyle, die im Vergleich zum Chrom-Bis(trimethylsilyl)aminoborylen-Komplex (OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) zu höheren Energien verschoben sind. Die Befunde deuten darauf hin, dass der ({BN(SiMe\(_3\))(t-Bu)})-Ligand ein etwas stärkerer σ-Donor ist. [3] Wie in Transferreaktionen gezeigt werden konnte, bevorzugt der Borylen-Ligand {BN(SiMe\(_3\))(t-Bu)} einen terminalen Koordinationsmodus bei Lewis-aciden, frühen Übergangsmetallen und einen verbrückenden Koordinationsmodus bei Lewis-basischen, späten Übergangsmetallen. Projekt: Borirene Die Synthese der ersten Bis(borirenyl)platin-Komplexe wurde vorgestellt, zusammen mit strukturellen und elektronischen Auswirkungen der koplanar angeordneten Borirenringe. Die Reihe der trans-Bis(borirenyl)platin-Komplexe 119/120, 122/123, und 125/126 stellt die ersten Beispiele für Bis(boriren)-Komplexe dar, in denen die Ringsysteme koplanar zueinander angeordnet sind (Abbildung 6-4). Die Rolle des Platinatoms als Vermittler elektronischer Kommunikation zwischen den chromophoren, aromatischen Borliganden manifestiert sich in einem bathochromen Shift der Boriren-Absorptionsbanden im Vergleich zu Mono-σ-Borirenyl-Systemen, als Folge einer ausgedehnten Elektronendelokalisierung. Das trans-Bis(boriren)platin-Gerüst dient dabei als vereinfachtes monomeres System, um sowohl die Effekte des Übergangmetallatoms in der Vermittlung elektronischer Konjugation als auch die Abstimmbarkeit der photophysikalischen Eigenschaften in Abhängigkeit der dreigliedrigen, aromatischen Ringe zu studieren. Eine Reihe von trans-Bis(alkinyl)platin-Komplexen (95, 102, 106, und 63) wurde als Plattform für den Borylentransfer von {BN(SiMe\(_3\))\(_2\)} dargestellt (Abbildung 6-3). Durch Salzeliminierungsreaktionen von cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) mit zwei Äquivalenten des entsprechenden Alkins in Diethylamin ließen sich die Komplexe "trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)]" (95), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] " (102), "trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)]" (106), und "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) synthetisieren. Drei trans-Bis(borirenyl)platin-Komplexe (119/120, 122/123, und 125/126) konnten erfolgreich durch photolytischen Transfer des terminalen Borylen-Liganden {BN(SiMe\(_3\))\(_2\)} vom Chrom-Komplex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) auf die trans-Bis(alkinyl)platin-Komplexe (95, 102, und 106) dargestellt werden (Abbildung 6-4). Versuche des Borylentransfers auf den trans-Bis(alkinyl)platin-Komplex "trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)]" (63) scheiterten an der Photoinstabilität des Komplexes. Obwohl eine weitere Vielzahl an Platin-Alkinyl-Komplexen dargestellt wurde, verlief der Borylentransfer nur bei den drei eben erwähnten Komplexen erfolgreich. Weitere Bestrebungen, ein cis-Isomer zum direkten Vergleich mit den trans-konfigurierten Komplexen darzustellen, verliefen ebenfalls erfolglos. Außerdem wurden terminal funktionalisierte Platin-Komplexe vom Gladysz-Typ als Plattform zum Borylentransfer synthetisiert, zeigten sich aber ebenfalls instabil unter photolytischen Bedingungen. Eine Reihe neuer Monoborirene Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), und [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) wurde durch photolytischen und thermischen Transfer des unsymmetrischen {BN(SiMe\(_3\))(t-Bu)}-Liganden ausgehend von den Komplexen [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), und W (21)) auf organische und organometallische Alkin-Substrate dargestellt. Ziel dieser Umsetzungen war es zu untersuchen, ob der unsymmetrische Borylen-Ligand eine andere Reaktivität im Vergleich zu den symmetrischen, terminalen Borylenen der Form [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), und W (15)) aufweist. Die entsprechenden Monoborirene wurden als analytisch reine Öle isoliert. Zur Röntgenstrukturanalyse geeignete Einkristalle konnten demnach nicht erhalten werden. Projekt: Boratabenzole Der Bis(boratabenzol)-Komplex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}](189) wurde durch Umsetzung von Tetrabromdiboran (65) mit sechs Äquivalenten Cobaltocen erfolgreich dargestellt. Die Reaktion ist in der Hinsicht besonders, da Cobaltocen (176) sowohl als Reagens als auch als Reduktionsmittel fungiert (Abbildung 6-5). Der bimetallische Übergangsmetallkomplex besteht aus einem verbrückenden Bis(boratabenzol)-Liganden, der die beiden Metallzentren durch eine Bor-Bor-Einfachbindung verbindet. Es konnte gezeigt werden, dass der neuartige Ligand eine Delokalisierung der π-Elektronen zwischen den Cobaltatomen ermöglicht, begünstigt durch das zur Bor-Bor-Bindung zugehörige LUMO. Wie durch die Separation aufeinanderfolgender Redoxprozesse im Cyclovoltammogramm gezeigt werden konnte, vermittelt der dianionische Diborligand die elektronische Kopplung zwischen den Cobaltatomen. Vier verschiedene Redoxpotentiale wurden für Komplex 189 gefunden:E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, und E\(_{1/2}\)(4) = −2.36 V (referenziert gegen das Fc/Fc+-Paar) (Abbildung 6-6). Die Potentiale können zwei dicht beieinander liegenden Oxidationsprozessen ([(189)]\(^{0/+1}\) und [(189)]\(^{+1/+2}\) und zwei gut getrennten Reduktionsprozessen [(189)]\(^{+1/+2}\) und [(189)]\(^{–1/–2}\) zugeordnet werden. Das Ausmaß der Metall-Metall-Kommunikation ist dabei abhängig von der Ladung der Metallatome. Die negative Ladung wird effektiver durch die Bis(boratabenzol)-Einheit delokalisiert (Robin-Day-Klasse II). Magnetische Messungen deuten darauf hin, dass die Cobalt(II)-Ionen schwach antiferromagnetisch über die B-B-Brücke gekoppelt sind. Während die Reduktion des Bis(boratabenzol)-Systems zur Zersetzung des Komplexes führte, resultierte die Ein- und Zwei-Elektronen-Oxidation in isolierbaren, stabilen monokationischen (194) bzw. dikationischen (195) Formen des Bis(boratabenzol)-Komplexes (Abbildung 6-7). Die präparativen Arbeiten bestätigen damit die elektrochemischen Ergebnisse an der neutralen Verbindung. Die kationischen Spezies zeigten sich instabil in Acetonitril oder Nitromethan, den einzigen Lösungsmitteln worin sie sich lösten, was weitere Reaktivitätsstudien erschwerte. Schließlich wurde die Reaktivität des neutralen Bis(boratabenzol)-Komplexes 189 eingehender untersucht. Versuche zur (A) Abspaltung des freien Bis(boratabenzol)-Liganden durch Dekomplexierung der Cyclopentadienylcobalt-Fragmente und zur (B) oxidativen Addition von Übergangsmetall-Komplexen an die B-B-Bindung, um die ersten L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\))Komplexe darzustellen, wurden unternommen. Alle Versuche zeigten jedoch, dass die eingesetzten Reagenzien entweder zu keinen Umsetzungen oder zur Zersetzung des Bis(boratabenzol)-Komplexes führten. Bisher konnten somit noch keine Hinweise auf eine oxidative Addition der B-B-Bindung im Bis(boratabenzol)-Komplex erhalten werden. KW - Borverbindungen KW - Boron Chemistry KW - Aromatic Systems KW - Transition Metals KW - Aromaten KW - Übergangsmetall KW - Chemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-137498 ER - TY - THES A1 - Liu, Siyuan T1 - New Avenues in the Reactivity of Borylene Complexes T1 - Neue Wege in der Reaktivität von Borylenkomplexen N2 - The thesis is mainly about the reactivities of borylene complexes. Including the investigation of the reaction of base stabilized terminal borylene with elemental chalcogens. On the other hand the are also the reactivity of borylene with bipyridine species is also studies. A C-H activation of the Cp2WH2 using borylene is also discovered. Finally the reaction of a borylene with Lewis acids such as GaCl3 and InBr3 is also studied. N2 - Die Fragestellung der Arbeit zielte auf die Erforschung der Reaktivität von Borylenkomplexen (20, 22, 43, 50, 90, 104). Reaktionen von Übergangsmetallborylen-Komplexen wurden mit einer Reihe von verschiedenen Reagenzien untersucht, deren Produkte neuartige Bindungsmotive zeigten. Viele der Verbindungen wurden als erste Beispiele ihrer Art isoliert, mit teils sehr ungewöhnlichen strukturellen Eigenschaften. Durch spektroskopische und strukturelle Charakterisierungsmethoden wurden sowohl die Konstitution der Verbindungen bestätigt als auch ihre Bindungsverhältnisse aufgeklärt ... KW - borylene KW - chalcogen KW - Borylene KW - Chalkogene Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-184302 ER - TY - THES A1 - Lindl, Felix T1 - Synthese und Reaktivität spezieller Borheterocyclen T1 - Synthesis and reactivity of special boron heterocycles N2 - Die Dissertationsschrift befasst sich mit der Synthese, Charakterisierung sowie Reaktivität spezieller Borheterocyclen und lässt sich in drei Themengebiete gliedern. Der erste Teil behandelt die Reaktivität des elektronisch stabilisierten 1-Ferrocenyl-2,3,4,5-tetraphenylborols gegenüber klassischen Substraten für Ringerweiterungsreaktionen von Borolen. Der zweite Abschnitt beschreibt post-synthetische Funktionalisierungen von 1,2-Azaborininen. Dargestellte Boryl-substituierte 1,2-Azaborinine konnten in BN-analoge Verbindungen von Borafluorenen überführt werden. Ferner gelang die Isolierung eines zweifach BN-substituierten Phenanthrenderivats. Im dritten Teil erfolgt eine kritische Auseinandersetzung mit anerkannten Zusammenhängen der Reaktionen von B-funktionalisierten 2,3,4,5-Tetraphenylborolen gegenüber Diphenylacetylen. N2 - Three topics were addressed in the present work. The first part focused on the reactivity of the electronically stabilized 1-ferrocenyl-2,3,4,5-tetraphenylborole towards typical substrates for ring expansion reactions of boroles. In the second part, post-synthetic functionalizations of 1,2-azaborinines were described, and in the third part, a critical discussion of generally recognized interrelationships of the reactions of B-functionalized 2,3,4,5-tetraphenylboroles with diphenylacetylene was undertaken. KW - Borheterocyclen KW - Borole KW - Boron heterocycles KW - 1,2-Azaborinine KW - Ringerweiterungsreaktionen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246929 ER - TY - THES A1 - Lenczyk, Carsten T1 - Koordination und Funktionalisierung von Dihydroboranen an Übergangsmetallkomplexen - Darstellung neuer Carbodiphosphorane und deren Koordination an ausgewählte Substrate T1 - Coordination and functionalization of dihydroboranes with transition metal complexes - Synthesis of new carbodiphosphoranes and their coordination to selected substrates N2 - Teil 1: Koordination und Funktionalisierung von Dihydroboranen an Übergangsmetallkomplexen Im Rahmen der vorliegenden Arbeit wurden Untersuchungen zur Koordination und Funktionalisierung von Dihydroboranen an Übergangsmetallkomplexen durchgeführt. Aufgrund der möglichen Anwendung in Dehydrokupplungsreaktionen wurde die Umwandlung von Dihydroboranen in Borylenkomplexe genauer untersucht. Teil 2: Darstellung neuer Carbodiphosphorane und deren Koordination an ausgewählte Substrate Durch Anwendung einfacher Synthesemethoden konnten in der vorliegenden Arbeit neuartige Carbodiphosphorane dargestellt werden. Diese wurden im weiteren Verlauf der Untersuchungen auf ihre Reaktivität gegenüber ausgewählten Substraten untersucht. N2 - Part 1 Coordination and functionalization of dihydroboranes with transition metal complexes The present work has focused on the coordination and functionalization of dihydroboranes towards various transition metal complexes. In light of possible applications in dehydrocoupling reactions, the conversion of dihydroboranes to borylene complexes was investigated in detail. Part 2 Various carbodiphosphoranes have been synthesized using simple reaction methods. In addition, these carbodiphosphoranes were used to probe the reactivity of this class of compounds towards selected substrates. KW - Borylene KW - Übergangsmetallkomplexe KW - Dehydrokupplung KW - Dihydroborane KW - Borylene Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-180581 ER - TY - THES A1 - Landmann, Johannes T1 - Cyanoborate: Synthesen, Ionische Flüssigkeiten und Koordinationsverbindungen sowie die Chemie des Bor-zentrierten Nukleophils B(CN)\(_3\)\(^2\)\(^-\) T1 - Cyanoborates: Syntheses, Ionic Liquids and coordination compounds and the chemistry of the boron-centred nucleophile B(CN)\(_3\)\(^2\)\(^-\) N2 - Diese Arbeit beschäftigt sich mit der Synthese, Reaktivität und den physikalischen Eigenschaften verschiedener Cyanoborate. Es gelang die optimierte Synthese des Tricyanofluoroborates M[BF(CN)3] (M = Na, K) mittels Lewis-Säure-Katalyse. Aus diesem Borat wurde mittels Reduktion das Bor-zentrierte Nukleophil B(CN)3 2− hergestellt, welches ebenfalls über die äußerst ungewöhnliche Depronotierung des [BH(CN)3]− -Anions zugänglich ist. Das B(CN)3 2− -Dianion wurde erfolgreich mit diversen Elektrophilen wie z.B. Alkylhalogeniden, CO2, CN+-Quellen sowie per- und teilfluorierten Aromaten umgesetzt. Darüber hinaus ergibt die Synthese mit Tricyanohalogenoborat-Anionen das ungewöhnlich stabile gekoppelte Diborat-Dianion [B2(CN)6]2−, welches über einen SN2-Mechanismus entsteht und eine elektronenpräzise B-B-Bindung aufweist. Ferner wurden Ionische Flüssigkeiten mit Perfluoraklylcyanoboraten hergestellt und die physikalischen Parameter systematisch und ausführlich untersucht. N2 - In this work the syntheses, reactivity and physical properties of different cyanoborates are presented. The synthesis of the tricyanofluoroborates M[BF(CN)3] (M = Na, K) was optimized via a Lewis-acid-catalysis. Reducing this anion resulted in the formation of the boron-centered nucleophile B(CN)3 2−, which is accessible by the highly unusual deprotonation of [BH(CN)3]−, too. The B(CN)3 2− -dianion was successfully treated with various electrophiles such as alkylhalides, CO2, CN+ -sources as well as partly and perfluorinated arenes. Moreover, the synthesis with halidotricyanoborate anions provide the unusually stable coupled diborat-dianion [B2 (CN)6]2−, which is formed via a SN2-mechanismusm and exhibits an electron-precise B-B-bond. Furthermore, Ionic Liquids based on perlfuorocyanoborates were synthesized and their physical properties were studied systematically in detail. KW - Borate KW - Koordinationsverbindungen KW - Nucleophile Substitution KW - Viskosität KW - Elektrische Leitfähigkeit KW - Ionische Flüssigkeiten KW - Cyanoborate KW - Nukleophiles Bor KW - Diboran(6)-Verbindung KW - Umpolung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155469 ER - TY - THES A1 - Kramer, Thomas T1 - Übergangsmetall-Bor-Wechselwirkungen in Boryl- und Boridkomplexen T1 - Transitionmetal-Boron-Interactions in Boryl and Boride Complexes N2 - Durch Untersuchungen zur Reaktivität von Boryl- und Boridverbindungen konnten deren Bindungssituationen aufgeklärt und neuartige Koordinationsmotive von Übergangsmetall-Bor-Verbindungen erhalten werden. Die erhaltenen Verbindungen wurden mittels NMR-Spektroskopie, IR-Spektroskopie, Elementaranalyse und Röntgendiffraktometrie untersucht und zusätzlich wurden DFT-Rechnungen angefertigt. An verschieden substituierten Eisenborylkomplexen wurden Reaktivitätsuntersuchungen gegenüber Halogenidabstraktionsmitteln und Reduktionsmitteln durchgeführt und im Falle der Boridkomplexe wurden Verbindungen mit bis dato unbekanntem Strukturmotiv erhalten. N2 - Investigations into the reactivities of boryl and boride complexes provided insight into their bonding and led to previously unknown coordination motifs for transition-metal-boron complexes. The resulting compounds were analyzed via NMR spectroscopy, IR spectroscopy, elemental analyses and crystal structure analyses. Their electronic structures were investigated by theoretical calculations using DFT methods. The reactivities of substituted iron boryl complexes toward halogenide abstracting and reducing reagents were studied and, in case of the boride complexes, novel structural motifs were dentified. KW - Übergangsmetall KW - Mehrkernige Komplexe KW - Borylgruppe KW - Dimerisierung KW - Übergangsmetall-Borverbindungen KW - Borchemie KW - Boridkomplexe KW - Isonitrilinsertion KW - Boride KW - Borylkomplexe Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112222 ER - TY - THES A1 - Kelch, Hauke T1 - Synthese und Reaktivität neuer Bor-haltiger Heterocyclen UND Element-Element-Bindungsaktivierungen durch vicinale Biscarbenoide T1 - Synthesis and Reactivity of Novel Boron Containing Heterocycles AND Element-Element-Bond Activation via Vicinal Biscarbenoids N2 - Teil 1: Synthese und Reaktivität neuer Bor-haltiger Heterocyclen Im Rahmen der vorliegenden Arbeit wurden Versuche unternommen, neue Borolverbindungen auf Basis des 2,3,4,5-Tetrakis(pinakolboryl)buta-1,3-diendiyl-Rückgrates mit unterschiedlichen Substituenten am Borzentrum darzustellen. Des Weiteren wurde ein neues Borolsystem auf Basis des Tetraphenylbutadien-Gerüstes synthetisiert, das die elektronenziehende Perfluorphenylgruppe als Bor-ständigen Substituenten trägt. Durch experimentelle Gegenüberstellung der strukturellen und spektroskopischen Parameter konnte - unterstützt durch quantenchemische Berechnungen - der Einfluss der Rückgratsubstitution eingehend untersucht werden. Teil 2: Element-Element-Bindungsaktivierungen durch vicinale Biscarbenoide Im Rahmen der vorliegenden Arbeit wurde das vicinale Biscarbenoid Bis(piperidyl)acetylen eingesetzt um die Reaktivität dieser Verbindungsklasse gegenüber Lewis-sauren Hauptgruppenelementverbindungen aufzuklären. N2 - Part 1: Synthesis and Reactivity of Novel Boron Containing Heterocycles The synthesis of novel 2,3,4,5-tetrakis(pinacolatoboryl) substituted boroles has been attempted in this work. A novel borole based on the tetraphenyl backbone has been synthesized using the electron withdrawing perfluorphenyl substituent at boron, allowing accurate determinaton of the backbone influence on the electronic properties of boroles. Part 2: Element-Element Bond Activation via Vicinal Biscarbenoids The vicinal biscarbenoid bis(piperidyl)acetylene was used to probe the reactivity of this class of compounds towards Lewis-acidic main group reagents. KW - Borheterocyclen KW - Carbenoide KW - Bindungsaktivierung KW - Umlagerung KW - Antiaromatizität Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153951 ER - TY - THES A1 - Kachel, Stephanie T1 - Element-Element-Bindungsaktivierungen und Carben-Boran-Adduktdarstellungen durch vicinale Biscarbenoide T1 - Element-element bond activations and carbene-borane adduct representations by vicinal biscarbenoids N2 - Im Rahmen der vorliegenden Arbeit wurde das vicinale Biscarbenoid Bis(piperidyl)acetylen eingesetzt um neben Bindungsaktivierungen, auch Carben-Addukte darzustellen. Im ersten Abschnitt liegt der Fokus auf der Reaktivität des Acetylens gegenüber 1,3-dipolaren Reagenzien. Dies führte auf Grund der carbenoiden Eigenschaften des Acetylens, neben der Ausbildung heterocyclischer Additionsprodukte, zu Bindungsaktivierungen. Der zweite Abschnitt befasst sich mit der Darstellung von Carben-Boran-Addukten, die anhand ihrer strukturellen und spektroskopischen Parameter miteinander verglichen und eingehend untersucht wurden. In dieser Arbeit wird die Reaktivität des Bis(piperidyl)acetylens auf Nebengruppen-Metallkomplexe erweitert. N2 - The vicinal biscarbenoid bis(piperidyl)acetylene was used to prepare carbene adducts in addition to bond activations. In the first section, the focus is on the reactivity of acetylene towards 1,3-dipolar reagents. This led to bond activations due to the carbenoid properties of acetylene and to the formation of heterocyclic addition products. The second section deals with the preparation of carbene-borane adducts, which were compared and studied in detail based on their structural and spectroscopic parameters. In this work, the reactivity of bis(piperidyl)acetylene is extended to side-group metal complexes. KW - Carbenoide KW - Bindungsaktivierungen KW - Bindungsaktivierung KW - Biscarbenoide KW - Carben-Boran-Addukte Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-253291 ER - TY - THES A1 - Hörl, Christian T1 - Synthese und Reaktivität von heteroaromatisch-substituierten Borolen und Diborenen T1 - Synthesis and reactivity of heteroaromatic-substituted boroles and diborenes N2 - Im Rahmen dieser Arbeit konnten erstmals die Eigenschaften von 1-heteroaromatisch-substituierten, freien Borolen des Typs R′BC4Ph4 untersucht werden. Der Rest R′ wurde unter Verwendung von bekannten Synthesemethoden (Zinn-Bor-Austausch, Salzeliminierung) variiert und die Borolderivate 45 (R′ = Thien-2-yl), 46 (R′ = 5-Methylfuran-2-yl), 47 (R′ = 5-Trimethylsilylthien-2-yl) und 49 (R′ = N-Methylpyrrol-3-yl) erfolgreich synthetisiert und vollständig charakterisiert (Multikern-NMR-Spektroskopie, Elementaranalyse, Röntgenstrukturanalyse am Einkristall). Des Weiteren ist es gelungen, die ersten Bis(borole) mit den heteroaromatischen Brückeneinheiten 2,5-Thienyl (54) und 5,5′-Bithiophen (55) mittels Zinn-Bor-Austausch-Reaktion darzustellen. Die Molekülstruktur von 54 bestätigt dabei nicht nur die erfolgreiche Synthese, sondern auch die coplanare Ausrichtung der drei Ringsysteme zueinander. Anhand von cyclovoltammetrischen Messungen konnte gezeigt werden, dass in diesem -konjugierten Akzeptor-Donor-Akzeptor-System (54) eine ausgeprägte Kommunikation zwischen den beiden Borzentren vorliegt. Dadurch ergeben sich vier irreversible Reduktionsereignisse, die ausgehend von 54, dem Monoanion [54]•−, dem Dianion [54]2−, dem Trianion [54]3− und dem Tetraanion [54]4− zugewiesen werden können. Das Verhalten von 54 gegenüber Reduktion wurde außerdem nicht nur elektrochemisch, sondern auch mithilfe unterschiedlicher Reduktionsmittel analysiert. Die Reduktion mit einem halben Äquivalent des Zwei-Elektronen-Reduktionsmittels Magnesiumanthracen führte dabei zu dem vollständig delokalisierten Monoanion Mg0.5[54], welches ESR-spektroskopisch charakterisiert werden konnte. Die Reduktion mit einem Äquivalent Magnesiumanthracen bzw. zwei Äquivalenten des Ein-Elektronen-Reduktionsmittels CoCp*2 lieferte das Dianion [54]2−, das für den Fall von [CoCp*2]2[54] im Festkörper studiert werden konnte. Die Molekülstruktur belegt, dass es sich bei Dianion [54]2− nicht um ein diradikalisches, sondern ein diamagnetisches, chinoides System handelt, welches auch als Bipolaron beschrieben werden kann. Der Einfluss von heteroaromatischen Substituenten wurde außerdem im Hinblick auf die Synthese neuartiger Basen-stabilisierter Diborene untersucht. Durch reduktive Kupplung geeigneter NHC-stabilisierter Dihalogenborane 77 und 78 (NHC = IMe) konnten die beiden Thienyl-substituierten Diborene 81 und 82 in sehr guten Ausbeuten (81: 82%; 82: 89%) dargestellt werden. UV-Vis-spektroskopische Untersuchungen und quantenchemische Rechnungen belegen, dass das HOMO der Diborene durch die -Bindung der BB-Bindung repräsentiert wird. Im Gegensatz zu den bekannten Aryl-substituierten Diborenen (73, 74) zeigt die Festkörperstruktur von 82 eine coplanare Ausrichtung der Heterocyclen relativ zur BB-Bindungsebene. Dadurch wird die sterische Abschirmung der reaktiven BB-Doppelbindung vermindert und weitere Reaktivitätsuntersuchungen in Analogie zur Reaktivität von CC-Doppelbindungen können durchgeführt werden. N2 - In this thesis, the properties of 1-heteroaromatic-substituted, non-annulated boroles with a R′BC4Ph4 framework have been studied for the first time. The variation of the R′ substituent was achieved with established synthetic procedures (tin-boron exchange, salt elimination) and the borole derivatives 45 (R′ = thien-2-yl), 46 (R′ = 5-methylfuran-2-yl), 47 (R′ = 5-trimethylsilylthien-2-yl) and 49 (R′ = N-methylpyrrol-3-yl) were successfully synthesized and characterized (multinuclear NMR spectroscopy, elemental analysis, single-crystal X-ray diffraction). In addition, the isolation of the first bis(borole)s with the heteroaromatic spacer units 2,5-thienyl (54) and 5,5′-bithiophene (55) via tin-boron exchange reaction was accomplished. The solid-state structure of 54 confirms not only the successful synthesis, but also the coplanar arrangement of the three five-membered rings with respect to each other. The measurement of a cyclic voltammogram for this compound revealed the existence of distinct communication between the two boron atoms in this acceptor-donor-acceptor system (54). Thus, the four irreversible reduction events of 54 were assigned to the formation of the monoanion [54]•−, the dianion [54]2−, the trianion [54]3− and the tetraanion [54]4−. Moreover, the reduction behavior of 54 was analyzed chemically with a selection of diverse reducing agents. The reduction with half an equivalent of the two-electron reducing agent magnesium anthracene results in the fully delocalized monoanion Mg0.5[54], which was characterized by EPR spectroscopy. The dianion [54]2− is accessible via reduction with one equivalent of magnesium anthracene or two equivalents of the one-electron reducing agent CoCp*2. In the case of [CoCp*2]2[54], the molecular structure revealed that the dianion is not a diradical, but rather has a diamagnetic, quinoidal structural motif across the thiophene spacer, which is characteristic of so-called bipolarons. The effect of heteroaromatic substituents was also explored with respect to the synthesis of novel base-stabilized diborenes. After reductive coupling of appropriate NHC-stabilized dihalogen-boranes 77 and 78 (NHC = IMe) the thienyl-substituted diborenes 81 and 82 were isolated in excellent yields (81: 82%; 82: 89%). UV-vis spectroscopy and DFT calculations independently substantiate that the HOMO of the diborenes is represented by the -bond of the BB double bond (Figure 4). In contrast with the common aryl-substituted diborenes (73, 74), the solid-state structure of 82 exhibits a coplanar alignment of the heterocyclic substituents with respect to the BB bond plane. Thus, the steric shielding of the reactive BB double bond is significantly reduced and enables further reactivity studies in analogy to the well-known reactivity of CC double bonds. KW - Borole KW - Borheterocyclen KW - Heteroaromaten KW - Diboren KW - Boryl Anion KW - Heteroaromaten KW - Bor Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-94391 ER - TY - THES A1 - Häfner, Alena T1 - Reaktivität eines \(ortho\)-phenylenverbrückten Diborans und Darstellung von gespannten C\(_2\)B\(_2\)-Ringsystemen T1 - Reactivity of an \(ortho\)-phenylenbridged diborane and synthesis of strained C\(_2\)B\(_2\) ring systems N2 - Die Dissertation befasst sich mit der Reaktivität von 1,2-Bis(dichlorboryl)benzol. Im ersten Kapitel wird auf die Problematik bei dessen Synthese eingegangen. Der zweite Teil der Arbeit befasst sich mit der Bildung von entsprechenden Boran-Addukten mit verschiedenen Lewis-Basen. Das dritte Kapitel beschreibt die Synthese eines neuartigen, vollständig ungesättigten 1,2-Diboretdiradikals, welches durch die schrittweise Reduktion des 1,2-[(CAAC)BCl2]2-Benzols erhalten wurde. Darüber hinaus konnte bei dieser schrittweisen Reduktion ebenfalls das einfache Borylradikal, das nicht-cyclische Diradikal und das dianionische gespannte C2B2-Ringsystem erhalten werden. Anfängliche Reaktivitätsstudien zum 1,2-Diboretdiradikal zeigen zudem, dass die B-B-Bindung durch Umsetzung mit Kohlenstoffmonoxid gespalten und so ein Bisborylen dargestellt werden kann. Im vierten Kapitel konnte das 1,2-Bis(dichlorboryl)benzol durch Transmetallierungsreaktionen zu verschiedenen, sich in ihren Eigenschaften stark unterscheidenden, Verbindungen umgesetzt werden. So konnte das fluoreszierende ortho-phenylenverbrückte Bis-9-Borafluoren erhalten werden, aus welchem durch Wärmezufuhr das ebenfalls fluoreszierendes diboraanthracenartige Umlagerungsprodukt gewonnen werden konnte. Beide Verbindungen wurden auf ihre photophysikalischen und elektrochemischen Eigenschaften untersucht. Weiterhin konnten polycyclische Boracyclen mit C10B2-Gerüst erhalten werden, bei welchen instantan die selektive Bildung von zwei chiralen Zentren über eine Vielzahl an B-C-Bindungsbrüchen und -knüpfungen beobachtet wurde. Zuletzt konnte ein thermisch empfindliches, potentiell explosives Azid-verbrücktes Azidoboran dargestellt werden, bei welchem eine Staudinger-artige Reaktivität beobachtet werden konnte. N2 - The dissertation deals with the reactivity of 1,2-bis(dichloroboryl)benzene. The first chapter deals with the problems involved in its synthesis. The second part of the thesis deals with the formation of corresponding borane adducts with various Lewis bases. The third chapter describes the synthesis of a novel, fully unsaturated 1,2-diboretdiradical, which was obtained by the stepwise reduction of 1,2-[(CAAC)BCl2]2-benzene. In addition, the simple boryl radical, the non-cyclic diradical and the dianionic strained C2B2 ring system were also obtained in this stepwise reduction. Initial reactivity studies on the 1,2-diboretdiradical also show that the B-B bond can be cleaved by reaction with carbon monoxide to give a bisborylene. In the fourth chapter, 1,2-bis(dichloroboryl)benzene was reacted by transmetallation reactions to from various compounds with very different properties. Thus, the fluorescent ortho-phenylene-bridged bis-9-borafluorene was obtained, from which the likewise fluorescent diboraanthracene-like rearrangement product could be obtained by applying heat. Both compounds were investigated for their photophysical and electrochemical properties. Furthermore, polycyclic boracycles with a C10B2 scaffold were obtained, in which the selective formation of two chiral centers via a multitude of B-C bond breaks and linkages was observed instantaneously. Finally, a thermally sensitive, potentially explosive azide-bridged azidoborane was obtained for which Staudinger-like reactivity was observed. KW - Biradikal KW - Borylierung KW - Diboret KW - Borylradikale KW - CnB2-Heterocyclen KW - Biradikale Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-348020 ER - TY - THES A1 - Hupp, Florian T1 - Synthese und Reaktivität ausgewählter Platin(0)-Addukte von Gruppe 14/15 Halogeniden T1 - Synthesis and reactivity of selected platinum(0) adducts of group 14/15 halogenides N2 - Im Rahmen dieser Arbeit wurden Addukte zwischen dem elektronenreichen, späten Übergangsmetallkomplex Bisphosphanplatin(0) und Lewis-Säuren aus der Gruppe 14 und 15 dargestellt, sowie deren Reaktivität untersucht. Hier sind insbesondere die Darstellung und Untersuchung kationischer Komplexe zu erwähnen. Es konnten erfolgreich Addukte zwischen homoleptischen Platin(0) und heteroleptischen Platin(0)komplexen mit divalenten Gruppe 14 Chloriden (GeCl2, SnCl2 und PbCl2) dargestellt werden (Schema 50). Die Charakterisierung der Verbindungen [(IMes)(Cy3P)Pt–ECl2] (46–48) und [(Cy3P)2Pt–EX2] (50–53) erfolgte über multinukleare NMR-Spektroskopie und Röntgendiffraktometrie. Für die Stannylen- und Plumbylenaddukte konnten ebenfalls Diplatinaddukte [{(Cy3P)2Pt}2(μ2-EX2)] (54–57) dargestellt werden. Untersuchungen der Monoplatinkomplexe mittels Röntgendiffraktometrie ergaben einen erheblichen Grad der Pyramidalisierung um die Gruppe 14 Zentren. Das Germylenaddukt ist dabei der am höchsten pyramidalisierte Pt=EX2 Komplex, der bisher strukturell untersucht wurde.Die Koordination der Pt(0)einheiten in den Diplatinkomplexen wurde mittels 31P{1H}-NMR-Spektroskopie und UV-Vis-Spektroskopie bei variablen Temperaturen sowie DFT Rechnungen untersucht. Während im Diplatin-Stannylenkomplex 55 beide Pt–Sn-Bindungen stabil sind, verliert der Diplatin-Plumbylenkomplex 57 reversibel ein Pt(0)-Fragment bei hohen Temperaturen (RT). Die quantenchemischen DFT-Analysen des Plumbylens 53 ergaben, dass die berechnete σ-Hinbindung in der Richtung Pt→Pb deutlich stärker ausgeprägt ist und die σ-Rückbindung in der Richtung Pt←Pb kaum Bindungsanteile ausmacht. Somit entspricht der Bindungscharakter in Verbindung 53, wenn überhaupt, nur partiell dem einer Doppelbindung. Die vorherrschende Wechselwirkung ist die Pt→Pb σ-Donation. Transferexperimente bewiesen die erhöhte Lewis-Basizität im heteroleptischen Platin(0)fragment, außerdem konnte erfolgreich in einem Addukt der Ligand (PCy3 vs. IMes) ausgetauscht werden, was die Stabilität der Pt–E-Bindung beweist (Schema 50).Der synthetische Zugang zu niedrig koordinierten Sn- und Pb- Mono- und Dikationen wird allgemein durch die schlechte Löslichkeit und die hohe elektrophile Natur dieser Teilchen eingeschränkt. Durch die Reaktion der Germylen, Stannylen und Plumbylen Monoplatinaddukte (50–53) mit Aluminiumtrihalogeniden gelang es jedoch, solche niedrig koordinierten Monokationen [(Cy3P)2Pt–EX]2[AlX4]2 (64a = Sn, Br; 70a = Pb, Cl) in der Koordinationssphäre von Platin(0) darzustellen. Durch Abstraktion eines weiteren Halogenides mittels AlX3 konnten sogar bisher unbekannte niedervalente Komplexe [(Cy3P)2Pt–E][AlX4]2 (68 = Sn, Br; 75 = Pb, Cl) mit einem dikationischen Zinn- beziehungsweise Bleizentrum in der Koordinationssphäre eines Übergangsmetalles isoliert werden (Schema 51).Da durch die Stellung im Periodensystem kein vakantes p-Orbital vorhanden ist, reagieren Elementverbindungen der Gruppe 15 normalerweise nicht als Lewis-Säuren. Eine Reaktivitätsuntersuchung von hypervalenten Lewis-Säuren aus der späten Hauptgruppe mit elektronenreichen späten Übergangsmetallverbindungen stand daher noch aus. Es gelang eine Lewis-Säuren-unterstützte Transformation von Platin(0) und Phosphor(V)fluorid in eine Pt(II)/P(III)-Verbindung der Form trans-[(Cy3P)2Pt(F)(PF3)][PF6] (91) (Schema 52). Die Bildung einer stabilen Pt–PF3 Enheit mit starken σ-/π-Bindungen liefert die Triebkraft der Reaktion. Die Reaktivitätstudien von Antimon(III)halogeniden mit Platin(0)-Komplex ergaben sowohl die Bildung eines zweifach Pt(0)-basenstabiliserten Stiboniumkations, als auch das Produkt der oxidativen Addition. Beide Reaktionen wurden per multinuklearer NMR-Spektroskopie und Röntgendiffraktometrie bestätigt. Die Bildung des Diplatin-Stibeniumkations [{(Cy3P)2Pt}2(μ-SbF2)]+ (94) ist das erste Beispiel für ein MOLP mit einer antimonzentrierten Lewis-Acidität, wohingegen die Bildung des oxidativen Dihalostibanylkomplexes trans-[PtCl(SbCl2)(PCy3)2] (97) das erste Beispiel einer oxidativen Addition einer Sb–X-Bindung an ein Übergangsmetallzentrum ist (Schema 52). N2 - The results of this work can be summarized as follows. Adducts between the electron-rich Lewis-base [(Cy3P)2Pt] (10) and Lewis-acids from groups 14 and 15 were synthesized and their reactivity investigated, especially the formation of cationic species. The adducts were successfully obtained by the reaction of homoleptic and heteroleptic platinum(0)compounds and divalent group 14 chlorides (GeCl2, SnCl2 and PbCl2). The characterization of the compounds (IMes)(Cy3P)Pt–ECl2] (46–48) and [(Cy3P)2Pt–EX2] (50–53) was possible by multinuclear NMR spectroscopy and X-ray crystal diffraction analysis. For the stannylene and plumbylene adducts the bisplatinum analogues [{(Cy3P)2Pt}2(μ2-EX2)] (54–57) could also be isolated (Scheme 1). The Monoplatinum compounds exhibit a large degree of pyramidalization at the Group 14 centers. Compound 3a was found to be the most highly pyramidalized M=ER2 complex ever structurally characterized. The addition of a second platinum moiety was studied by 31P{1H} NMR spectroscopy and UV-Vis spectroscopy at variable temperatures as well as DFT calculations. The Pt-Sn bond of the bisplatinum stannylene complex 55 is robust. Nevertheless, the bisplatinum plumblyene compound complex 57 loses reversibly one Pt fragment at high temperature (RT). DFT calculations of the plumbylene compound 53 showed, that the calculated Pt→Pb σ-bond is much stronger than the calculated Pt←Pb σ-back-bond. Thus the character of the Pt–Pb bonding in the compound 53 corresponds if at all, only partially with that of a double bond. The predominant binding interaction is the Pt→Pb σ-donation. Transfer experiments revealed the higher Lewis-basicity of the heteroleptic platinum(0) vs that of the homoleptic platinum(0) fragments. The stability of the Pt–E bond was confirmed by the ligand exchange PCy3 vs IMes on the adduct compounds. Synthetic access to low-coordinate Pb mono- and dications is in general impeded due to their poor solubility and highly electrophilic nature. However, the electrophilicity of these cations can be tamed by attaching them to electron-rich transition metals. Monostannylene and -plumbylene complexes were treated with AlX3 to afford the cationic platinum complexes [(Cy3P)2Pt–EX]2[AlX4]2 (64a = Sn, Br; 70a = Pb, Cl). The abstraction of another halide with AlX3 led to the isolation of the unprecedented low-valent compounds [(Cy3P)2Pt–E][AlX4]2 (68 = Sn, Br; 75 = Pb, Cl) containing a dicationic tin or lead centre.Since no vacant p-orbital is available, through the position in the periodic table, group 15 compounds react normally not as Lewis-acids. Hence, the reactivity of hypervalent Lewis-acids from the late main group with electron-rich late transition metal complexes are still under investigation. The Lewis-acid supported transformation of bisphosphineplatinum(0) and phosphorus(V)fluoride into the mixed Pt(II)/P(III) compound trans-[(Cy3P)2Pt(F)(PF3)][PF6] (91) was successfully carried out (Scheme 3). The formation of a stable Pt–PF3 unit with strong σ-/π-bonds provides the driving force for the reaction.Extended studies towards the antimony trihalides with platinum(0), revealed the first example of unambiguous, unsupported MOLP chemistry of antimony-centered ligands, as well as the first evidence of an oxidative addition. Both reactions were studied by multinuclear NMR spectroscopy as well as X-ray diffraction analysis. The formation of the cationic stibenium complex [{(Cy3P)2Pt}2(μ-SbF2)]+ (94), is the first example for an unsupported metal-only Lewis pair containing an antimony-centered Lewis acid. In contrast, the dihalostibanyl complex trans-[PtCl(SbCl2)(PCy3)2] (97), is the first example of an oxidative addition of an antimony-halide bond to a transition metal (Scheme 3). KW - Metallorganische Verbindungen KW - Adduktbildung KW - Hauptgruppenelement KW - Platinkomplexe KW - Platinaddukte KW - Metall-zentrierte Lewis-Paare KW - Metal-only Lewis-Pairs KW - Adduct Complex KW - Organometallverbindungen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-108766 ER - TY - THES A1 - Hofmann, Alexander T1 - Neue niedervalente Organoaluminiumverbindungen: Darstellung und Eigenschaften T1 - New low valent organoaluminium compounds: synthesis and reactivity N2 - Die vorliegende Arbeit befasst sich mit der Darstellung und der Reaktivität von cyclopentadienylsubstituierten, niedervalenten Aluminiumverbindungen. Mit der Einführung einer Cp*-Gruppe konnte ein neues, bromsubstituiertes Dialan dargestellt, charakterisiert und auf seine Reaktivitäten untersucht werden. Neben 1,2-Dialuminierungen von Alkinen sowie einer Nitreninsertion, war eine Lewis-Basen-induzierten Disproportionierung des Dialans zu beobachten. Die Lewis-Basen-induzierten Disproportionierung konnte angewendet werden, um eine monomere 1,3,5-Tri-tert-butylcyclopentadienyl-Al(I)-Spezies zu isolieren. Um das Reaktionsverhalten mit anderen Al(I)-Verbindungen zu vergleichen, wurden Umsetzungen mit Distickstoffmonoxid und Phenylazid untersucht. Dabei wurden ähnliche Strukturmuster wie bei den anderen Al(I)-Systemen beobachtet. Weiterhin konnten verschieden Al-B-Verbindungen mit unterschiedlichen B-Al-Bindungen dargestellt werden, unter anderem die erste B-Al-Mehrfachbindung. N2 - Within this work, the synthesis and reactivity of cyclopentadienyl substituted, low valent aluminium complexes was investigated. Introduction of a Cp*-group allowed the synthesis of a new dibromodialane. The reactivity of compound 2 includes 1,2-dialumination of alkynes, nitrene insertion into the Al-Al-Bond, and Lewis base induced disproportionation of dialane. With the method of Lewis base induced disproportionation, a monomeric 1,3,5-Tri-tert-butylcyclopentadienyl Al(I) species was isolated. For comparison of the reactivity with other Al(I)-compounds, it was reacted with Nitrous Oxide and phenylazide, obtaining structures that are similar to those obtained in analogous reactions with other Al(I)-systems. Furthermore several compounds with different B-Al-interactions were synthesized, including the first B-Al multiple bond KW - Aluminiumverbindungen KW - Koordinativ ungesättigte Verbindungen KW - Cyclopentadienylkomplexe KW - Bor-Aluminium-Verbindungen KW - Niedervalente Verbindungen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178526 ER - TY - THES A1 - Hock, Andreas T1 - NHC-stabilized Alanes and Gallanes T1 - NHC-stabilisierte Alane und Gallane N2 - This thesis describes the synthesis and reactivity of NHC-stabilized Lewis-acid/Lewis-base adducts of alanes and gallanes (NHC = Me2ImMe, iPr2Im, iPr2ImMe, Dipp2Im, Dipp2ImH). As this field of research has developed tremendously, especially in the last five years, the first chapter provides an overview of the current state of knowledge. The influence of electronegative π-donor-substituents on the stability of the NHC alane adducts is examined in chapter 2. For this purpose, the carbene stabilized alanes (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) were reacted with secondary amines of different steric demand and with phenols. The π-donor substituents saturate the Lewis acidic aluminium center and coordination of a second NHC-ligand was not observed. The strongly electronegative N and O substituents increase the Lewis acidity of the aluminium atom, which leads to stronger Al-CNHC as well as Al-H bonds, which inhibits the insertion of the carbene into the Al-H bond. In Chapter 3 the development of the synthesis and reactivity of carbene-stabilized gallanes is presented. The synthesis of NHC gallane adducts (NHC)∙GaH3, (NHC)∙GaH2Cl and (NHC)∙GaHCl2 and their reactivity towards NHCs and cAACMe were investigated in detail. The reaction of the mono- and dichlorogallanes (NHC)∙GaH2Cl and (NHC)∙GaHCl2 (NHC = iPr2ImMe, Dipp2Im) with cAACMe led to insertion of the cAACMe with formation of chiral and achiral compounds depending on the sterically demand of the used NHC. Furthermore, the formation of bis-alkylgallanes was observed for the insertion of two equivalents of cAACMe with release of the NHC ligand. Chapter 4 describes investigations concerning the synthesis and reactivity of NHC-stabilized iodoalanes and iodogallanes, which are suitable for the formation of cationic aluminium and gallium dihydrides. The reaction of (NHC)∙EH2I (E = Al, Ga) stabilized by the sterically less demanding NHCs (NHC = Me2ImMe, iPr2Im, iPr2ImMe) with an additional equivalent of the NHC led to the formation of the cationic bis-NHC aluminium and gallium dihydrides [(NHC)2∙AlH2]+I- and [(NHC)2∙GaH2]+I-. Furthermore, the influence of the steric demand of the used NHC was investigated. The adduct (Dipp2Im)∙GaH2I was reacted with an additional equivalent of Dipp2Im. Due to the bulk of the NHC used, rearrangement of one of the NHC ligands from normal to abnormal coordination occurred and the cationic gallium dihydride [(Dipp2Im)∙GaH2(aDipp2Im)] was isolated. Chapter 5 of this thesis reports investigations concerning the reduction of cyclopentadienyl-substituted alanes and gallanes with singlet carbenes. NHC stabilized pentamethylcyclopentadienyl aluminium and gallium dihydrides (NHC)∙Cp*MH2 (E = Al, Ga) were prepared by the reaction of (AlH2Cp*)3 with the corresponding NHCs or by the salt elimination of (NHC)∙GaH2I with KCp*. The gallane adducts decompose at higher temperatures with reductive elimination of Cp*H and formation of Cp*GaI. . The reductive elimination is preferred for sterically demanding NHCs (Dipp2Im > iPr2ImMe > Me2ImMe). In addition, NHC ring expansion of the backbone saturated carbene Dipp2ImH was observed for the reaction of the NHC with (AlH2Cp*)3, which led to (RER-Dipp2ImHH2)AlCp*. Furthermore, the reactivity of the adducts (NHC)∙Cp*EH2 (E = Al, Ga) towards cAACMe was investigated. The reaction of the alane adducts stabilized by the sterically more demanding NHCs iPr2ImMe and Dipp2Im afforded the exceptionally stable insertion product (cAACMeH)Cp*AlH V-10 with liberation of the NHC. The reaction of the gallium hydrides (NHC)∙Cp*GaH2 with cAACMe led to the reductive elimination of cAACMeH2 and formation of Cp*GaI. A variety of neutral and cationic carbene-stabilized alanes and gallanes are presented in this work. The introduction of electronegative π-donor substituents (Cl-, I-, OR-, NR2-) and the investigations on the thermal stability of these compounds led to the conclusion that the stability of alanes and gallanes increased significantly by such a substitution. Investigations on the reactivity of the NHC adducts towards cAACMe resulted in various insertion products of the carbene into the Al-H or Ga-H bonds and the first cAACMe stabilized dichlorogallane was isolated. Furthermore, a first proof was provided that carbenes can be used specifically for the (formal) reduction of group 13 hydrides of the higher homologues. Thus, the synthesis of Cp*GaI from the reaction of (NHC)∙Cp*GaH2 with cAACMe was developed. In the future, this reaction pathway could be of interest for the preparation of other low-valent compounds of aluminium and gallium. N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Reaktivität NHC stabilisierter Lewis-Säuren/Lewis-Basen Addukte von Alanen und Galanen. Da sich dieses Forschungsgebiet insbesondere in den letzten fünf Jahren rasant entwickelt hat, wird im ersten Kapitel dieser Arbeit eine Übersicht über den gegenwärtigen Kenntnisstand gegeben. Nachdem in vorangegangenen Arbeiten in der Gruppe gezeigt werden konnte, dass NHC-substituierte Alane (NHC)∙AlH3 eine begrenzte Stabilität bezüglich einer möglichen Eliminierung von Dihydroaminal NHC-H2 bzw. der Ringerweiterung oder Ringöffnung des NHC-Liganden aufweisen, wird in Kapitel 2 der Arbeit der Einfluss elektronegativer π-Donor-Substituenten am Aluminium auf die Stabilität der dargestellten NHC-Alan-Addukte untersucht. Dazu wurden die Carben stabilisierten Alane (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) mit sekundären Aminen unterschiedlichen sterischen Anspruchs und Phenolen umgesetzt. Die π-Donor Substituenten sättigen das Lewis-saure Aluminiumzentrum ab, sodass eine Koordination eines zweiten NHC-Liganden nicht möglich ist. Ferner erhöhen die stark elektronegativen N- und O-Substituenten die Lewis-Acidität des Aluminiumatoms, das zu stärkeren Al-CNHC, aber auch Al-H-Bindungen führt und vermutlich deshalb die Insertion des Carbens in diese Bindung erschwert ist. Kapitel 3 beschreibt die Entwicklung der Synthese von Carben-stabilisierten Gallanen und Untersuchungen zu deren Reaktivität. Es wurde die Darstellung der NHC-Gallan-Addukte und ihre Reaktivität gegenüber NHCs und cAACMe im Detail untersucht. Durch die Substitution der Hydrid-Substituenten durch Chloride konnte mit zunehmendem Chlorierungsgrad eine erhöhte Stabilität der Addukte festgestellt werden. Die Reaktion von cAACMe mit den NHC-stabilisierten Gallanen führt zur Insertion des cAACMe in die Ga-H-Bindung unter Ausbildung chiraler und achiraler Insertionsprodukten, sowie der zweifachen Insertion von cAACMe unter Abspaltung des NHC-Liganden und Bildung von Bisalkylgallanen. Kapitel 4 beschreibt Untersuchungen zur Synthese und Reaktivität Carben-stabilisierter Iodtriele, welche zur Darstellung kationischer Aluminium- und Galliumdihydride geeignet sind. Die Reaktion der NHC-Iodotriele (NHC)∙EH2I (E = Al, Ga), welche durch weniger sterisch anspruchsvollen NHCs stabilisiert werden, mit einem zusätzlichen Äquivalent des entsprechenden NHCs führt zur Bildung der kationischen bis-NHC-Aluminium- und Galliumdihydride [(NHC)∙MH2]+I. Um den Einfluss des sterischen Anspruchs des NHCs zu untersuchen, wurde das Addukt (Dipp2Im)∙GaH2I mit einem zusätzlichen Äquivalent Dipp2Im umgesetzt. Aufgrund der Sterik der verwendeten Carbene führte dies zur Umlagerung eines NHCs von normaler zu abnormaler Koordination unter Bildung von [(Dipp2Im)∙GaH2(aDipp2Im)]I. Im fünften Kapitel der Arbeit werden Untersuchungen zur Reduktion Cp*-substituierter Triele mit Carbenen beschrieben. Die Darstellung NHC-stabilisierter Cp* -Alane- und Gallane (NHC)∙Cp*MH2 (M = Al, Ga) erfolgte durch die direkte Umsetzung von (AlH2Cp*)3 mit den entsprechenden NHCs, bzw. durch Salzeliminierung ausgehend von (NHC)∙GaH2I mit KCp*. Die Gallan-Addukte zersetzen sich bei höheren Temperaturen unter reduktiver Eliminierung von Cp*H und Bildung von Cp*GaI. Die reduktive Eliminierung findet bevorzugt für sterisch anspruchsvolle NHCs statt. Darüber hinaus wurde eine NHC Ringerweiterungsreaktion des im Rückgrat gesättigten Carbens Dipp2ImH bei der Reaktion mit (AlH2Cp*)3 unter Ausbildung von (RER-Dipp2ImHH2)AlCp*. Darüber hinaus wurde die Reaktivität der Addukte (NHC)∙Cp*EH2 (E = Al. Ga) gegenüber cAACMe untersucht. Die Reaktion der durch die sterisch anspruchsvolleren NHCs iPr2ImMe und Dipp2Im stabilisierten Addukte mit cAACMe führte zur Bildung des außergewöhnlich stabilen Insertionsproduktes (cAACMeH)Cp*AlH unter Abspaltung des NHC-Liganden. Die Reaktion der Galliumhydride (NHC)∙Cp*GaH2 mit cAACMe führte stattdessen direkt zur reduktiven Eliminierung von cAACMeH2 unter Ausbildung von Cp*GaI.Im Rahmen dieser Arbeit wurden neutrale und kationische Carben-stabilisierte Alane und Gallane eingehend untersucht. Durch das Einführen elektronegativer π-Donor-Substituenten und Untersuchungen zur thermischen Belastbarkeit dieser Verbindungen wurde nachgewiesen, dass sich die Stabilität der Alane bzw. Gallane durch eine derartige Substitution deutlich erhöht. Untersuchungen zur Reaktivität der NHC-Addukte gegenüber cAACMe brachte diverse Insertionsprodukte des Carbens in Al-H bzw. Ga-H-Bindungen hervor. Ferner konnte das erste cAACMe-stabilisierte Dichlorogalliumhydrid dargestellt werden. Darüber hinaus wurde ein erster Nachweis erbracht, dass Carbene gezielt zur (formalen) Reduktion von Hydriden der höheren Homologen der Gruppe 13 verwendet werden können. So wurde die Synthese von Cp*GaI aus der Reaktion von (NHC)∙Cp*GaH2 mit cAACMe entwickelt. In Zukunft könnte dieser Reaktionspfad zur Darstellung niedervalenter Verbindungen der Triele Aluminium und Gallium von Interesse sein. KW - Aluminiumhydridderivate KW - Gallium KW - Heterocyclische Carbene <-N> KW - Aluminium KW - Carbene Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212525 ER - TY - THES A1 - Hermann, Alexander T1 - Untersuchung von B-B-Doppelbindungen als Bestandteil konjugierter p-Systeme T1 - Integration of B-B Double Bonds in conjugated p-Systems N2 - Der erste Teil dieser Arbeit beschäftigt sich mit der "Synthese und Reaktivität sterisch anspruchsvoller Iminoborane". Dabei war es möglich, ausgehend von einem Terphenylamin geeignete Aminoborane zu synthetisieren, welche anschließend mit starken, nicht-nukleophilen Basen umgesetzt wurden. Mittels formaler HCl-Eliminierung mit LiTmp gelang auf diese Weise die Darstellung sterisch anspruchsvoller Iminoborane. Der zweite Teil dieser Arbeit befasst sich mit der "Untersuchung von B-B-Doppelbindungen als Bestandteil konjugierter p-Systeme". Durch die Verwendung von sterisch wenig anspruchsvollen Liganden oder Boryl-Substituenten war es möglich planare Diboren-Systeme zu generieren und darüberhinaus Divinyldiborene darzustellen. N2 - The first part of this work deals with the "Synthesis and Reactivity of Sterically Demanding Iminoboranes". Starting with a terphenylamine, it was possible to synthesize aminoboranes, which were then reacted with strong, non-nucleophilic bases. Formal HCl elimination mit LiTmp thus enabled the preparation of sterically demanding iminoboranes. The second part of this thesis focuses on the "Integration of B-B Double Bonds in conjugated p-Systems". By using sterically low damanding ligands or boryl-substituents it was possible to generate planar diborene structures and to synthesize divinyldiborenes. KW - Konjugation KW - Hauptgruppenelementverbindungen KW - Diborene KW - Hauptgruppenelementchemie KW - Conjugation KW - Diborene KW - Main Group Chemistry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-204592 ER - TY - THES A1 - Hagspiel, Stephan Alexander T1 - Synthesis and Reactivity of Pseudohalide-substituted Boranes and Borylenes T1 - Synthese und Reaktivität Pseudohalogenid-substituierter Borane und Borylene N2 - This work involves the synthesis and reactivity of pseudohalide-substituted boranes and borylenes. A series of compounds of the type (CAAC)BR2Y (CAAC = cyclic alkyl(amino)carbene; R = H, Br; Y = CN, NCS, PCO) were prepared first. The two-electron reduction of (CAAC)BBr2Y (Y = CN, NCS) in the presence of a second Lewis base L (L = N-heterocyclic carbene) resulted in the formation of the corresponding doubly Lewis base-stabilized pseudohaloborylenes (CAAC)(L)BY. These borylenes show versatile reactivity patterns, including their oxidation to the corresponding radical cations, coordination via the respective pseudohalide substituent to group 6 metal carbonyl complexes, as well as a boron-centered protonation with Brønsted acids to boronium cations. Reduction of (CAAC)BBr2(NCS) in the absence of a second donor ligand, led to the formation of boron-doped thiazolothiazoles via reductive dimerization of two isothiocyanatoborylenes. These B,N,S-heterocycles possess a low degree of aromaticity as well as interesting photophysical properties and can furthermore be protonated as well as hydroborated. Additionally, CAAC adducts of the parent boraphosphaketene (CAAC)BH2(PCO) could be prepared, which readily reacted with boroles [Ph4BR'] (R' = aryl) via decarbonylation in a ring expansion reaction. The obtained 1,2-phosphaborinines represent B,P-isosteres of benzene and consequently could be coordinated to metal carbonyl complexes of the chromium triade via η6-coordination, resulting in new half-sandwich complexes thereof. N2 - Diese Arbeit beinhaltet die Synthese und Reaktivität von Pseudohalogenid-substituierten Boranen und Borylenen. Dabei wurde zunächst eine Reihe an Verbindungen des Typs (CAAC)BR2Y (CAAC = cyclisches Alkyl(amino)carben; R = H, Br; Y = CN, NCS, PCO) dargestellt. Die Zweielektronenreduktion von (CAAC)BBr2Y (Y = CN, NCS) in der Gegenwart einer weiteren Lewis-Base L (L = N-heterocyclisches Carben) resultierte in der Bildung der entsprechenden zweifach Lewis-Basen-stabilisierten Pseudohalogenborylene (CAAC)(L)BY. Diese Borylene zeigen eine vielseitige Folgechemie, wobei sie zu den korrespondierenden Radikalkationen oxidiert, über den jeweiligen Pseudohalogenidsubstituenten an Metallcarbonylkomplexe der Gruppe 6 koordiniert sowie mit Brønsted-Säuren Bor-zentriert zu Boroniumkationen protoniert werden können. Die Reduktion von (CAAC)BBr2(NCS) in Abwesenheit eines weiteren Donorliganden führte über die reduktive Dimerisierung zweier Isothiocyanatoborylene zur Bildung Bor-dotierter Thiazolothiazole. Diese B,N,S-Heterocyclen verfügen über ein geringes Ausmaß an Aromatizität sowie interessante photophysikalische Eigenschaften, und können darüber hinaus protoniert wie auch hydroboriert werden. Des Weiteren konnten CAAC-Addukte des Stammboraphosphaketens (CAAC)BH2(PCO) dargestellt werden, die bereitwillig unter Decarbonylierung in einer Ringerweiterungsreaktion mit Borolen [Ph4BR‘] (R‘ = Aryl) reagieren. Die erhaltenen 1,2-Phosphaborinine stellen B,P-Isostere des Benzols dar und konnten folglich über eine η6-Koordination an Metallcarbonylkomplexe der Chromtriade koordiniert werden, woraus neue Halbsandwichkomplexe dieser resultierten. KW - Borylene KW - Pseudohalogenide KW - Heteroaromaten KW - boron KW - pseudohalides KW - heterocycles KW - aromaticity KW - DFT KW - Bor KW - Pseudohalogenide KW - Heterocyclen KW - Aromatizität KW - DFT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-249459 ER - TY - THES A1 - Gärtner, Annalena T1 - Synthese und Reaktivität niedervalenter Borverbindungen T1 - Synthesis and reactivity of low-valent boron compounds N2 - Die Dissertation befasst sich mit der Synthese und Reaktivität verschiedener niedervalenter Borverbindungen. In dem ersten Kapitel der Arbeit wurde das CAAC-stabilisierte Cyano(hydro)borylanion auf seine Bor- sowie Stickstoff-zentrierte Nucleophilie hin untersucht. Das ambidente Reaktionsverhalten der Verbindung konnte gegenüber verschiedenen Kohlenstoffelektrophilen sowie Monohalogenboranen nachgewiesen werden. Der zweite Teil der Arbeit befasst sich mit der Aktivierung, Fixierung und Verkettung von Distickstoff durch Borylene. Es gelang den Mechanismus experimentell sowie quantenchemisch aufzuklären. Das Folgeprodukt der Protonierung, welches ein Bisborylhydrazindiradikal darstellt, wurde weitergehend auf seine Reaktivität als Reduktionsmittel untersucht und konnte selektiv einfach sowie zweifach oxidiert werden. Das dritte Kapitel beschreibt die Synthese eines neuartigen, vollständig ungesättigten 1,2-Diboretdiradikals, welches durch die schrittweise Reduktion des 2,3-[(CAAC)BBr2]2-Naphthalins erhalten wurde. Anfängliche Reaktivitätsstudien zu dem 1,2-Diboretdiradikal zeigen zudem, dass die Verbindung als Bor-Bor-Mehrfachbindung gegenüber einem Azid reagiert, jedoch durch die Umsetzung mit Kohlenstoffmonoxid auch zu einem Bisborylen gespalten werden kann. N2 - The dissertation deals with the synthesis and reactivity of various low-valent boron compounds. The first chapter of the thesis discusses the boron- and nitrogen-centred nucleophilicity of the CAAC-stabilised cyano(hydro)borylanion. The ambivalent reaction behaviour of the compound was demonstrated by reacting it with various carbon electrophiles as well as monohalogen boranes. The second part of the work deals with the activation, fixation and reductive coupling of dinitrogen by borylenes. The mechanism was elucidated experimentally and quantum-chemically. The protonation product, a bisboryl hydrazine diradical, was further investigated for its reactivity as a reducing agent and could be selectively oxidized. The third chapter describes the synthesis of a novel, fully unsaturated 1,2-diborete biradicaloid obtained by the stepwise reduction of 2,3-[(CAAC)BBr2]2 naphthalene. Initial reactivity studies on the 1,2-diborete biradicaloid also show that the compound reacts either as a boron-boron multiple bond towards azides, but can also be cleaved to a bisborylene by reaction with carbon monoxide. KW - Borylene KW - Stickstofffixierung KW - Borylierung KW - Borylanion KW - Diboret KW - Borylen KW - Niedervalentes Bor KW - Niedervalente Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-292771 ER -