TY - THES A1 - Wehner, Tobias T1 - Multifunktionale Kompositmaterialien auf Basis lanthanidhaltiger Verbindungen mit lumineszierenden Nanopartikeln und superparamagnetischen Mikropartikeln T1 - Multifunctional composite materials based on lanthanide containing compounds with luminescent nanoparticles and superparamagnetic microparticles N2 - Die vorliegende Arbeit umfasst die Synthese und Charakterisierung 23 neuartiger, multifunktionaler Kompositmaterialien basierend auf lanthanidhaltigen Verbindungen sowie verschiedenen Nano- und Mikropartikeln. Die dargestellten Materialien konnten als Core/Shell-Systeme mit einem nano- bzw. mikropartikelhaltigen Kern und einer lanthanidhaltigen Hülle charakterisiert werden und vereinen aufgrund ihres Kompositcharakters die spezifischen Eigenschaften der Einzelkomponenten wie Lumineszenz, Superparamagnetismus oder Reflexionseigen-schaften miteinander. Zur Synthese multifunktionaler, lumineszierender Materialien wurden zirconylbasierte, lumineszierende Nanopartikel mit Lanthanidchloriden und lanthanidhaltigen MOFs funktionalisiert. Die Kompositsysteme LnCl3@ZrO(FMN) (FMN = Flavinmononukleotid, Ln = Y, Sc, La, Eu, Tb, Ho) ermöglichen eine Modifizierung der Lumineszenzeigenschaf-ten der Materialien abhängig von der Reaktionstemperatur sowie dem verwendeten Selten-Erd-Ion. Durch Variation der Nanopartikelkomponente konnte mittels der Kom-posite LnCl3@ZrO(MFP) (MFP = Methylfluoresceinphosphat) ein zusätzlicher sol-vatochromer Effekt der Systeme eingeführt werden, während das Kompositmaterial YCl3@ZrO(RP) (RP = Resorufinphosphat) eine andere Chromatizität zugänglich macht. Durch Modifizierung von ZrO(FMN)- und ZrO(MFP)-Nanopartikeln mit 3∞[Eu2(BDC)3]· 2DMF·2H2O (BDC2- = Benzol-1,4-dicarboxylat) wurden Kompositmaterialien dargestellt, die zwei Lumineszenzprozesse mit unterschiedlicher Chromatizität und unterschiedli-cher Anregbarkeit miteinander kombinieren und somit eine reversible Schaltbarkeit zwischen beiden Prozessen durch Variation der Anregungswellenlänge ermöglichen. Zur Synthese luminomagnetischer Materialien wurden superparamagnetische Fe3O4/SiO2-Mikropartikel mit einer Vielzahl lanthanidhaltiger MOFs, die sich hinsichtlich ihrer Lumineszenzeigenschaften und ihrer Stabilität gegenüber Luft und Wasser unterscheiden, modifiziert. Als MOFs wurden hierbei 2∞[Ln2Cl6(Bipy)3]·2Bipy (Bipy = 4,4‘-Bipyridin, Ln = Nd, Sm, Eu, Tb, Er), 3∞[Eu(Im)2], 3∞[Ba0.95Eu0.05(Im)2] (Im = Imidazolat) und 3∞[Eu2(BDC)3]·2DMF·2H2O eingesetzt. Die Variation der zur Funktionalisierung verwendeten Komponente oder eine Kombination mehrerer MOFs ermöglicht eine Anpassung der Lumineszenz der Kompositmaterialien innerhalb des kompletten sichtbaren Spektralbereichs sowie im NIR-Bereich. Die dargestellten luminomagnetische Kompositmaterialien mit wasserempfindlichen MOFs können zur Detektion von Wasser in verschiedenen organischen Lösungsmitteln verwendet werden und stellen somit eine mobile und einfach anwendbare Alternative zur Karl-Fischer-Titration mit einer vergleichbaren Sensitivität dar. So eignen sich die Kompositsysteme 2∞[Eu2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 und 2∞[Eu2Cl6(Bipy)3]·2Bipy, 2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 als optische turn-off-Sensoren, während das Kom-posit 3∞[Eu2(BDC)3]·2DMF·2H2O,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 als ratiometrischer Sensor verwendet werden kann. Als Alternative zu sphärischen Partikeln wurden auch anisotrope, stäbchenförmige Fe3O4/SiO2-Mikropartikel mittels 3∞[Eu2(BDC)3]·2DMF·2H2O modifiziert. Das resul-tierende Kompositmaterial vereint die isotropen Lumineszenzeigenschaften der MOF-Hülle mit der anisotropen Reflexion von sichtbarem Licht der. Durch die Wahl der Anregungswellenlänge und Richtung eines externen Magnetfelds wird eine stufenlose und reversible Schaltbarkeit zwischen isotropen und anisotropen Eigenschaften ermöglicht. Durch mechanochemische Umsetzung der MOF-Edukte [LnCl3(Py)4]·0.5Py (Ln = Eu, Ho) und 4,4‘-Bipyridin konnte eine Vielzahl von literaturbekannten lanthanidhaltigen Komplexen und Koordinationspolymeren mittels einer neuen und zeiteffizienten Syntheseroute dargestellt werden. Hierbei kann die Verknüpfungsdimension der resultierenden Produkte abhängig von verschiedenen Reaktionsparametern, die den Energieeintrags der Kugelmühle beeinflussen, gesteuert werden. N2 - The thesis at hand deals with the synthesis and characterization of 23 novel multi-functional composite materials that are based on lanthanide containing compounds as well as different nano- and microparticles. The synthesized compounds can be described as core/shell systems with a nanoparticle and microparticle containing core, respectively, and a lanthanide containing shell. Due to their composite character, the materials combine the specific properties of their single constituents such as luminescence, superparamagnetism or reflection properties. For the synthesis of multifunctional luminescent materials, zirconyl containing, lumines-cent nanoparticles were modified with lanthanide chlorides as well as lanthanide con-taining MOFs. The composite materials LnCl3@ZrO(FMN) (FMN = flavin mononucleo-tide, Ln = Y, Sc, La, Eu, Tb, Ho) enable a modification of the materials’ luminescence properties in dependence on the reaction temperature and the particular rare earth ion. Variation of the nanoparticle component leads on the one hand to formation of the sys-tem LnCl3@ZrO(MFP) (MFP = methylfluorescein phosphate), which exhibits a strong solvatochromic effect, and on the other hand to the composite YCl3@ZrO(RP) (RP = resorufin phosphate), which makes another chromaticity of the luminescence ac-cessible. The modification of ZrO(FMN) and ZrO(MFP) nanoparticles with 3∞[Eu2(BDC)3]· 2DMF·2H2O (BDC2- = benzene-1,4-dicarboxylate) results in composite materials that combine two luminescence processes with a different chromaticity and a diverse excita-tion range. Therefore, a continuous and reversible switching between both processes can be executed by variation of the excitation wavelength. For the synthesis of luminomagnetic materials, superparamagnetic Fe3O4/SiO2 micro-particles were modified with a variety of lanthanide containing MOFs that differ in terms of their luminescence properties and their water and air stability. For this purpose, the MOFs 2∞[Ln2Cl6(Bipy)3]·2Bipy (Bipy = 4,4’-Bipyridine, Ln = Nd, Sm, Eu, Tb, Er), 3∞[Eu(Im)2], 3∞[Ba0.95Eu0.05(Im)2] (Im- = imidazolate) and 3∞[Eu2(BDC)3]·2DMF·2H2O were employed for microparticle functionalization. By variation of the selected MOF or a combination of two different compounds, the luminescence properties of the composite materials could be adjusted in the whole visible spectral region as well as in the NIR region. The synthesized luminomagnetic composite materials with water sensitive MOFs can be applied for the detection of water in various organic solvents. Therefore, such compo-sites can be used as alternative to the Karl-Fischer titration that is easy applicable, mo-bile and exhibits similar detection limits. The composite materials 2∞[Eu2Cl6(Bipy)3]· 2Bipy@Fe3O4/SiO2 and 2∞[Eu2Cl6(Bipy)3]·2Bipy,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 can be deployed as optical turn-off sensors, while the composite system 3∞[Eu2(BDC)3]· 2DMF·2H2O,2∞[Tb2Cl6(Bipy)3]·2Bipy@Fe3O4/SiO2 is suitable for a ratiometric determina-tion of the water content. As alternative to spherical particles, anisotropic rod-like Fe3O4/SiO2 microparticles were functionalized with 3∞[Eu2(BDC)3]·2DMF·2H2O. The resulting composite material com-bines the isotropic luminescence of the MOF shell with the anisotropic reflection of visible light of the microparticle component. A continuous and reversible switching between both optical properties is enabled by the variation of the excitation wavelength and the direction of an external magnetic field. The mechanochemical reaction of the MOF precursors [LnCl3(Py)4]·0.5Py (Ln = Eu, Ho) and 4,4’-bipyridine leads to a variety of lanthanide containing complexes and coordina-tion polymers that have already been reported in literature. Thus, a novel and time effi-cient synthesis route could be described for an alternative preparation of these com-pounds. The dimensionality of the resulting substances can be influenced in dependence on different reaction parameters that have an influence on the application of energy by the ball mill. KW - Photolumineszenz KW - Metallorganisches Netzwerk KW - Superparamagnetismus KW - Mikropartikel KW - Nanopartikel KW - Kompositmaterialien KW - Lumineszenzsensor KW - Luminomagnetische Partikel Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-158186 ER - TY - THES A1 - Rieger, Max T1 - Preconcentration with Metal-Organic Frameworks as adsorbents for airborne Explosives and Hazardous Materials - A study using inverse gas chromatography T1 - Anreicherung mit Metal-Organic Frameworks als „Adsorbentien für luftgetragene Explosiv- und Gefahrstoffe - Eine Studie mit inverser Gaschromatographie" N2 - Sensitivity and selectivity remain the central technical requirement for analytical devices, detectors and sensors. Especially in the gas phase, concentrations of threat substances can be very low (e.g. explosives) or have severe effects on health even at low concentrations (e.g. benzene) while it contains many potential interferents. Preconcentration, facilitated by active or passive sampling of air by an adsorbent, followed by thermal desorption, results in these substances being released in a smaller volume, effectively increasing their concentration. Traditionally, a wide range of adsorbents, such as active carbons or porous polymers, are used for preconcentration. However, many adsorbents either show chemical reactions due to active surfaces, serious water retention or high background emission due to thermal instability. Metal-organic frameworks (MOFs) are a hybrid substance class, composed inorganic and organic building blocks, being a special case of coordination polymers containing pores. They can be tailored for specific applications such as gas storage, separation, catalysis, sensors or drug delivery. This thesis is focused on investigating MOFs for their use in thermal preconcentration for airborne detection systems. A pre-screening method for MOF-adsorbate interactions was developed and applied, namely inverse gas chromatography (iGC). Using this pulse chromatographic method, the interaction of MOFs and molecules from the class of explosives and volatile organic compounds was studied at different temperatures and compared to thermal desorption results. In the first part, it is shown that archetype MOFs (HKUST-1, MIL-53 and Fe-BTC) outperformed the state-of-the-art polymeric adsorbent Tenax® TA in nitromethane preconcentration for a 1000 (later 1) ppm nitromethane source. For HKUST-1, a factor of more than 2000 per g of adsorbent was achieved, about 100 times higher than for Tenax. Thereby, a nitromethane concentration of 1 ppb could be increased to 2 ppm. High enrichment is addressed to the specific interaction of the nitro group as by iGC, which was determined by comparing nitromethane’s free enthalpy of adsorption with the respective saturated alkane. Also, HKUST-1 shows a similar mode of sorption (enthalpy-entropy compensation) for nitro and saturated alkanes. In the second part, benzene of 1 ppm of concentration was enriched with a similar setup, using 2nd generation MOFs, primarily UiO-66 and UiO-67, under dry and humid (50 %rH) conditions using constant sampling times. Not any MOF within the study did surpass the polymeric Tenax in benzene preconcentration. This is most certainly due to low sampling times – while Tenax may be highly saturated after 600 s, MOFs are not. For regular UiO-66, four differently synthesized samples showed a strongly varying behavior for dry and humid enrichment which cannot be completely explained. iGC investigations with regular alkanes and BTEX compounds revealed that confinement factors and dispersive surface energy were different for all UiO-66 samples. Using physicochemical parameters from iGC, no unified hypothesis explaining all variances could be developed. Altogether, it was shown that MOFs can replace or add to state-of-the-art adsorbents for the enrichment of specific analytes with preconcentration being a universal sensitivity-boosting concept for detectors and sensors. Especially with iGC as a powerful screening tool, most suitable MOFs for the respective target analyte can be evaluated. iGC can be used for determining “single point” retention volumes, which translate into partition coefficients for a specific MOF × analyte × temperature combination. N2 - Empfindlichkeit und Selektivität bleiben die zentralen technischen Anforderungen an analytische Geräte, Detektoren und Sensoren. Speziell in der Gasphase können die Konzentrationen von Gefahrstoffen sehr niedrig sein (z. B. Explosivstoffe) oder bereits bei niedrigen Konzentrationen schädigende Auswirkungen auf die Gesundheit aufweisen (z. B. Benzol) während sie viele potenzielle Interferenzien enthält. Präkonzentration, die durch aktives oder passives Sampling von Luft durch ein Adsorbens, gefolgt von einer Thermodesorption realisiert wird, setzt diese Substanzen effektiv in einem kleineren Volumen frei, was zu einer Erhöhung der Konzentration führt. Üblicherweise wird hierfür eine breite Auswahl an Adsorbentien wie Aktivkohlen oder poröse Polymere verwendet. Jedoch weisen viele Adsorbentien entweder chemische Reaktionen wegen aktiver Oberflächen, starke Wasserretention oder hohe Hintergrundemission wegen thermischer Instabilität auf. Metal-organic frameworks (MOFs) sind eine hybride Substanzklasse, ein Spezialfall der porösen Koordinationspolymere, die aus anorganischen und organischen Baugruppen aufgebaut sind. Sie können für spezifische Anwendungen wie Gasspeicherung, Trennung, Katalyse, Sensorik oder Wirkstofftransport maßgeschneidert werden. Diese Arbeit befasst sich hauptsächlich mit der Untersuchung von MOFs bei der thermischen Anreicherung für luftgetragene Detektionssysteme. Eine Methode zur schnellen Untersuchung von MOF-Analyt Interaktionen wurde entwickelt und angewendet, die inverse Gaschromatographie (iGC). Mit dieser pulschromatographischen Methode wurde die Interaktion von MOFs und Molekülen aus der Klasse der Explosivstoffe sowie Klasse der flüchtigen organischen Verbindungen (VOCs) in der Gasphase bei verschiedenen Temperaturen untersucht und mit Thermodesorptionsmessungen verglichen. Im ersten Teil der Arbeit würde gezeigt das Modell-MOFs (HKUST-1, MIL-53 und Fe-BTC) den polymeren Standard Tenax® TA beim Anreichern von Nitromethan an einer 1000 (später 1) ppm Nitromethan Quelle übertrafen. Im Fall von HKUST-1 konnte ein Faktor von 2000 pro Gramm erreicht werden, etwa 100-fach höher als für Tenax. Auf diese Weise könnte eine Nitromethan Konzentration von 1 ppb auf 2 ppm erhöht werden. Diese hohen Anreicherungsfaktoren entstammen vermutlich der hohen spezifischen Wechselwirkung der Nitrogruppe mit den MOFs. Diese wurden durch iGC beim Vergleich von Nitromethans freier Adsorptionsenthalpie mit dem entsprechenden gesättigten Alkan ermittelt. HKUST-1 weist auch einen ähnlichen Adsorptionsmodus (Enthalpie-Entropie Kompensation) für Nitro- und gesättigte Alkane auf. Im zweiten Teil der Arbeit wurde die Anreicherung von 1 ppm Benzol, mit einem ähnlichen Aufbau und anderen MOFs, hauptsächlich UiO-66 und UiO-67, unter trockenen und feuchten (50 %rF) Bedingungen bei konstanten Samplingzeiten, untersucht. Hierbei konnte kein MOF das polymere Tenax beim Anreichern von Benzol übertreffen. Dies liegt vermutlich an den niedrigen Samplingzeiten – während Tenax nach 600 s bereits stark gesättigt ist, gilt dies nicht für MOFs. Im Fall von UiO-66 zeigten vier Proben unterschiedlicher Herkunft ein stark unterschiedliches Verhalten bei trockener und feuchter Anreicherung welches nicht vollständig erklärt werden kann. iGC Untersuchungen mit gesättigten Alkanen und BTEX-Verbindungen konnten aufzeigen, dass räumliche Beschränktheitsfaktoren und dispersive Oberflächenenergien für alle vier Proben unterschiedlich waren. Mit physikochemischen Parametern aus iGC-Messungen konnte jedoch keine einheitliche Hypothese zum Unterscheiden der Proben entwickelt werden. Insgesamt konnte gezeigt werden, dass MOFs bestehende Adsorbens-Standards zum Anreichern von bestimmten Analyten ersetzen oder erweitern können, wobei Präkonzentration ein Konzept ist, welches universell die Empfindlichkeit eines Detektors oder Sensors steigern kann. Insbesondere mit iGC als mächtiges Werkzeug zur Vorselektion können passende MOFs für die entsprechenden Zielanalyten evaluiert werden. Ebenso kann iGC auch zur Bestimmung von Einzelpunkt Retentionsvolumen, welche Verteilungskoeffizienten für eine bestimmte MOF × Analyt × Temperatur Kombination entsprechen, genutzt werden. KW - Metallorganisches Netzwerk KW - MOF KW - Gas chromatography KW - iGC KW - Explosives KW - Preconcentration KW - Explosivstoff KW - Inverse Gaschromatographie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-177750 ER - TY - THES A1 - Meier, Michael T1 - Synthese und Eigenschaften von funktionalisierten Borolen und 1,2-Azaborininen T1 - Synthesis and properties of functionalized boroles and 1,2-azaborinines N2 - Im Rahmen dieser Arbeit konnte das Portfolio an literaturbekannten, freien Bisborolen beträchtlich erweitert werden. Die Reihe der Oligothiophen-verbrückten Borole konnte um die Vertreter der Ter- bzw. Quaterthiophene erweitert werden. Weiterhin wurden Lewisbasenaddukte mit IMes, CAAC und DMAP dargestellt und zur röntgenspektrographischen Charakterisierung herangezogen. Durch den Vergleich der spektroskopischen Daten mit den bereits literaturbekannten Vertretern wurde eine schrittweise Entwicklung der Absorptionsmaxima in Abhängigkeit der Anzahl der Thienyleinheiten detektiert. Daraus konnte sowohl auf eine Verkleinerung der HOMO-LUMO-Abstände mit zunehmender Kettenlänge, als auch die Entwicklung zu einem Grenzwert bei einer hypothetisch unendlichen Kettenlänge geschlossen werden, welcher sich bei ca. ca. 2,40 eV befindet. Weiterhin wurden 9,9-Dimethylfluoren und Biphenyl erfolgreich zu Bisborolen umgesetzt. Beide Systeme sind aufgrund ihrer strukturellen Gemeinsamkeiten sowie ihrer Vergleichbarkeit mit literaturbekannten Bis(borolyl)benzol - Verbindungen von besonderem Interesse. Zudem konnte ein Vergleich der spektroskopischen Daten aller literaturbekannten und im Rahmen dieser Arbeit dargestellten Bisborole bewerkstelligt werden. Es wurde somit gezeigt, dass heteroaromatisch-verbrückte Bisborole eine größere energetische HOMO-LUMO-Lücke aufzeigen, als aromatisch-verbrückte Systeme. Zudem spielt die Position der Borolylgruppen und der damit verbundene Grad an pi-Interaktionen eine wichtige Rolle. Die beiden im Rahmen dieser Arbeit dargestellten Systeme 1,1'-(9,9-Dimethylfluoren-2,7-diyl)bis-(2,3,4,5-tetraphenylborol) und 4,4'-Bis(2,3,4,5-tetraphenylborol-1-yl)-1,1'-biphenyl reihen sich energetisch zwischen dem 1,3- bzw. 1,4-Bis(2,3,4,5-tetraphenylborol-1-yl)benzol ein. Insbesondere der Vergleich zwischen 1,4-Bis(2,3,4,5-tetraphenylborol-1-yl)benzol und 4,4'-Bis(2,3,4,5-tetraphenylborol-1-yl)-1,1'-biphenyl offenbart keine signifikante Energiedifferenz zwischen einer Phenyl- und einer Biphenylbrücke, was ein Indiz dafür darstellt, dass die Erweiterung des Spacers um eine zweite Phenyleinheit bei analoger 1,4-Verknüpfung nahezu keinen Einfluss auf die elektronischen Eigenschaften des Systems hat. Auch die Überführung von 1,1'-(9,9-Dimethylfluoren-2,7-diyl)bis-(2,3,4,5-tetraphenylborol) und 4,4'-Bis(2,3,4,5-tetraphenylborol-1-yl)-1,1'-biphenyl in die entsprechenden 1,2-Azaborinine wurde unter Verwendung von Trimethylsilylazid bewerkstelligt. Neben der Darstellung und Untersuchung neuer Bisborole wurde 9-(Thiophen-2-yl)carbazol erfolgreich für den Aufbau borhaltiger Donor-Akzeptor-Systeme eingesetzt. Es konnten im Zuge dessen ein Borol und dessen IMes-Addukt, ein 1,2-Azaborinin sowie ein Dimesitylboryl-substituiertes Derivat dargestellt und auf ihre optischen und elektronischen Eigenschaften hin untersucht werden. Dabei stand insbesondere die elektrochemische Quantifizierung der Elektronenakzeptorstärke des Borols im Vergleich zum Dimesitylboran im Fokus. Es wurde ein signifikanter Unterschied des Borols (Epc = -1.60 V, CH2Cl2) im Vergleich zum Dimesitylboran (E1/2 = -2.39 V, THF) detektiert, woraus eine deutlich höhere Akzeptorstärke des Borols abgeleitet werden kann. Zusätzlich wurden spektroskopische und photophysikalische Untersuchungen in Abhängigkeit der jeweiligen Verbindung durchgeführt. Durch den Vergleich des energetisch niedrigsten Absorptionsmaximas des Borols mit bereits literaturbekannten, thienylsubstituierten Borolen konnte ein signifikanter Donoreinfluss der Carbazoleinheit bestätigt werden. N2 - Within the scope of this thesis, a library of novel, free bisborole compounds was prepared, characterized and their spectroscopic properties examined. Oligothiophen-bridged bisboroles could be extended to ter- and quaterthiophenes. Furthermore, Lewis base adducts with IMes, cAAC and DMAP were synthesized and characterized by X-ray crystallography. By comparing the spectroscopic data with literature-known compounds, a successive increase in the absorption maxima with the number of thiophene units could be observed/identified. Extension of the chain length leads to an increasingly smaller HOMO-LUMO gap and a limiting value of 2.40 eV considering a hypothetically infinitely long thiophene spacer. Furthermore, 9,9-dimethylfluorene and biphenyl were successfully converted into bisboroles. Both systems are of special interest due to their structural similarities and comparability to the literature-known Bis(borolyl)benzene - compounds. Additionally, a spectroscopic comparison between all new and literature-known bisboroles could be achieved during this work. It was shown that heteroaryl-brigded bisboroles offer a larger HOMO-LUMO gap then aryl-brigded systems. Furthermore the position of the borolyl groups and the degree of pi-conjugation play an important role. Both systems 1,1'-(9,9-dimethylfluorene-2,7-diyl)bis-(2,3,4,5-tetraphenylborole) and 4,4'-bis(2,3,4,5-tetraphenylborole-1-yl)-1,1'-biphenyl are found to be energetically between 1,3- and 1,4-bis(2,3,4,5-tetraphenylborole-1-yl)benzene. The comparison between 1,4-bis(2,3,4,5-tetraphenylborole-1-yl)benzene and 4,4'-bis(2,3,4,5-tetraphenylborole-1-yl)-1,1'-biphenyl shows almost no difference in energy between a phenyl- and biphenyl-bridged system, indicating that expanding the system with another phenyl unit with the same 1,4-linkage has virtually no influence on the electronic properties. Additionally, the conversion of 1,1'-(9,9-dimethylfluorene-2,7-diyl)bis-(2,3,4,5-tetraphenylborole) and 4,4'-bis(2,3,4,5-tetraphenylborole-1-yl)-1,1'-biphenyl into the corresponding 1,2-azaborinines was achieved by reaction with trimethylsilyl azide. Besides the synthesis and investigation of new bisborole compounds, 9-(thiophen-2-yl)carbazole was successfully converted into new donor-acceptor-systems. Based on this system, a borole, an IMes-adduct, an 1,2-azaborinine and also a dimesitylboryl-substituted derivative were successfully prepared, characterized and investigated for their optical and electronic properties, with focus on the electrochemical quantification of the Lewis acid strength of the borole and the dimesitylborane. A significant difference in the first reduction potentials was detected between the borole (Epc = 1.60 V, CH2Cl2) and the dimesitylborane (E1/2 = -2.39 V, THF), indicating a much higher acceptor strength of borole. Additionally, spectroscopic and photophysical investigations were performed on each of these compounds. By comparison of the lowest maximum of the borole with literature-known, thienyl-substituted boroles, a significant donor influence of the carbazole group could be confirmed. KW - Borheterocyclen KW - Fünfringheterocyclen KW - Lewis-Säure KW - Sechsringverbindungen KW - Aromatische Verbindungen KW - Borole KW - 1,2-Azaborinine KW - Donor-Brücke-Akzeptor Systeme KW - Bisborole KW - Thiophen KW - boroles KW - 1,2-azaborinines KW - donor–bridge–acceptor systems KW - bisboroles KW - thiophene Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178402 ER - TY - THES A1 - Bertsch, Stefanie T1 - Photolytisch und thermisch induzierte Transmetallierung von Aminoborylenkomplexen T1 - Photolytically and thermally induced transmetallation of amino borylene complexes N2 - Aminoborylenkomplexe der Gruppe 6 [(OC)5M=BN(SiMe3)2] (M = Cr, Mo, W) reagieren mit Übergangsmetallkomplexen unter Transfer der Boryleneinheit bzw. in Transmetallierungsreaktionen und bilden dabei neuartige Borylenkomplexe. In dieser Dissertation wird die Synthese, Charakterisierung und Reaktivität der auf diesem Wege dargestellten Verbindungen - unter anderem Hydridoborylenkomplexe, Bis(borylen)komplexe und borylensubstituierte MOLPs - beschrieben. N2 - Amino borylene complexes of group 6 [(OC)5M=BN(SiMe3)2] (M = Cr, Mo, W) undergo reactions with transition metal complexes to form novel borylene complexes. These reactions can be viewed either as borylene transfer or as transmetallation reactions. In this thesis the syntheses, characterizations and reactivities of these novel compounds – amongst others hydridoborylene complexes, bis(borylene) complexes and borylene substituted MOLPs - is reported. KW - Borylene KW - Übergangsmetallkomplexe KW - Transmetallierung KW - Aminoborylenkomplexe KW - Borylentransfer Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-106797 ER - TY - THES A1 - Dück, Klaus T1 - Synthese, Untersuchung und Polymerisation neuartiger Sandwichkomplexe T1 - Synthesis, Investigation and Polymerization of new Sandwich Compounds N2 - In dieser Dissertation werden die Ergebnisse zur Synthese und Polymerisation gespannter Manganoarenophane vorgestellt. Weiterhin wird die Reaktivität von Bis(benzol)titan und die Synthese von ansa-Verbindungen dieses Komplexes, sowie Untersuchungen zu deren Eigenschaften beschrieben. Zum Vergeleich wird auch der Komplex Bis(mesityl)titan untersucht. Die Polymerisation von zinnverbrückten, gespannten Vanadium-Sandwichkomplexen und die Untersuchungen der paramagnetischen Eigenschaften ist ebenso in dieser Dissertationsschrift beschrieben. Zusätzlich wird die Synthese heteroleptischer Sandwichkomplexe des Scandiums und Yttriums dargestellt, sowie deren Ringsubstitution. Die Vorarbeiten zur Synthese heteroleptischer Sandwichkomplexe der Lanthanoide bildet ebenso einen Bestandteil dieser Schrift, wie die Synthese von ansa-Komplexen des Thorocens und Uranocens via flytrap-Methode. N2 - This Dissertation presents the results of the synthesis and polymerization of strained Manganoarenophanes. Furthermore the reactivity of bis(benzene)titanium and the synthesis of its ansa-compounds, as well as property investigations are shown. Comparative studies of the complex bis(mesityl)titanium are also described. The polymerization of tin-bridged, strained Vanadium sandwich compounds and the investigations of their paramagnetic properties are also described within this dissertation. Additionally the synthesis of heteroleptic sandwich complexes of Scandium and Yttrium and their ring substitution are presented. First results concerning the synthesis of heteroleptic sandwich complexes of the Lanthanides are a part of this work as well as the synthesis of ansa-compounds of Thorocene and Uranocene via flytrap-method. KW - Sandwich-Verbindungen KW - Überbrückte Verbindungen KW - Polymerisation KW - Lanthanoide KW - Actinoide KW - ansa-Komplexe/ ansa complexes KW - ringsubstituierte Sandwichverbindungen/ ring-substitueted sadnwich compounds KW - Verbrückte Verbindungen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112600 ER - TY - THES A1 - Meyer, Larissa Valerie T1 - Dünne Filme, Detektoren sowie Co-Dotierungen und Mischbarkeiten auf Basis von lumineszierenden Erdalkali-/Selten-Erd-Imidazolat-Gerüstverbindungen T1 - Thin films, detectors as well as co-doping and miscibilities based on luminescent alkaline earth / rare earth imidazolate frameworks N2 - This thesis deals with the formation of thin films and luminescence based detectors as well as co-dopings and larger miscibilities in luminescent alkaline earth / rare earth imidazolate coordination polymers and MOFs (metal organic frameworks). The formation of luminescent thin films of the coordination polymers 3∞[Sr1-xEux(Im)2] (x = 0 - 1) and the MOFs 3∞[Tb(Im)3] and 3∞[Ce(Im)3ImH]·ImH on nanostructured alumina substrates (AAO-substrates) was enabled by a new in-situ coating method based on a solvent free melt synthesis. Various layer thicknesses as well as different degrees of coverage were achieved. For the in-situ deposition of 3∞[Sr0.95Eu0.05(Im)2] two different coating strategies for the AAO substrates were established. In addition to the melt approach an electride induced coating method was carried out. Extraordinary baryte rose analogue crystals were observed on the AAO surface for the electride induced coating method. The deposition of the MOFs 3∞[Tb(Im)3] and 3∞[Ce(Im)3ImH]·ImH also took place via CVD processes (chemical vapor deposition). Thin luminescent films of the framework 3∞[Eu(Im)2] on (0001)-sapphire sub-strates were created by a new femto-PLD-process (femto-pulsed-laser-deposition). The films displayed a switchable transparency depending on the wavelength of the incoming light. 3∞[Sr0.95Eu0.05(Im)2], 3∞[Tb(Im)3] and 3∞[Ce(Im)3ImH]·ImH were examined as potential sensors or detectors regarding eight solvents and four gases. The exposure of the networks to water lead to a complete loss of luminescence intensity. MeOH-exposure is followed by a batho-chromic shift of the chromaticity of 3∞[Sr0.95Eu0.05(Im)2] from turquoise to orange. Acetone, pyridine, toluene, hexane, acetonitrile and dichloromethane increase the luminescence in-tensity of 3∞[Sr0.95Eu0.05(Im)2] and 3∞[Tb(Im)3]. The luminescence intensity of 3∞[Ce(Im)3ImH]·ImH is increased by acetonitrile as well as dichloromethane, but decreased under the influence of the other investigated solvents. The interaction of O2 and CO2 lead to a decrease of luminescence intensity by a turn-off-effect with the compounds 3∞[Tb(Im)3] and 3∞[Ce(Im)3ImH]·ImH, whereas no influence on the luminescence intensity of 3∞[Sr0.95Eu0.05(Im)2] was observed during exposure to N2, Ar, O2 and CO2. New coordination polymers 3∞[La4(Im)12(ImH)5]∙xImH (x = 2 - 3) and 3∞[Gd(Im)3] were synthe-sized as missing parts in the field of rare earth imidazolates. Both networks and the known alkaline earth imidazolates 2∞[Ca(Im)2(ImH)2], 3∞[Sr(Im)2] and 3∞[Ba(Im)2] as well as the rare earth imidazolates 3∞[Y(Im)3], 3∞[Ln(Im)3ImH]·ImH (Ln = Ce, Pr, Nd, Sm), 3∞[Gd2(Im)6(ImH)1.5]·0.5 ImH and 3∞[Tb(Im)3] were used as host lattice for the intrinsic luminescence of the Ln-ions Ce3+, Sm3+, Eu2+, Tb3+, Dy3+ and Yb3+. In addition to co-doping, larger miscibilities and possible phase boundaries were investigated. The correlation be-tween structure and luminescence as well as the possibility of color tuning based on additive color mixing of the emission colors were explored with the obtained bulk materials. Furthermore, the solvent free approach was expanded to alkaline earth and lanthanide met-als and the bicyclic ligand 1H-benzimidazole. The monomeric complexes [M(BIm)2(BImH)4] (M = Ca, Sr, Eu) and the two dimensional coordination polymers ²[AE(BIm)2] (AE = Mg, Ba) and ²[Eu(BIm)2(BImH)2] were synthesized and fully characterized. In the case of the Ba con-taining network two polymorphic forms of the network were obtained. N2 - Die vorliegende Arbeit behandelt die Herstellung dünner Filme und lumineszenzbasierter Detektoren sowie die Untersuchung von Co-Dotierungen bis hin zu größeren Bereichen von Mischbarkeiten auf Basis von lumineszierenden Erdalkali-/Selten-Erd-Imidazolat-Gerüstverbindungen und MOFs (metal organic frameworks). Die Herstellung lumineszierender, dünner Filme der Koordinationspolymere 3∞[Sr1-xEux(Im)2] (x = 0-1) und der MOFs 3∞[Tb(Im)3] und 3∞[Ce(Im)3ImH]·ImH auf nanoporösen, vorstrukturier-ten Aluminiumoxid-Trägern (AAO-Träger) gelang durch eine neue in-situ-Beschichtungsmethode auf Basis der solvensfreien Schmelzsynthese. Es wurden Filme mit unterschiedlichen Schichtdicken sowie Bedeckungsgraden erhalten. Die in-situ-Beschichtung von 3∞[Sr0.95Eu0.05(Im)2] auf AAO-Trägern erfolgte neben der Schmelzsynthese durch tieftem-peratur- und elektridinduzierte Vororganisation der Metalle mit nachfolgender Schmelzsyn-these. Außergewöhnliche, Barytrosen-analoge Kristallite konnten dabei auf den AAO-Trägern beobachtet werden. Für die Abscheidung der beiden MOFs 3∞[Tb(Im)3] und 3∞[Ce(Im)3ImH]·ImH konnten zudem CVD-Prozesse (chemical vapor deposition) nachge-wiesen werden. Mittels eines neuen Femto-PLD-Verfahrens (femto-pulsed-laser-deposition) konnten zudem lumineszierende, dünne Filme aus 3∞[Eu(Im)2] auf (0001)-Saphirsubstraten erhalten werden, die eine optische Schaltbarkeit in Abhängigkeit vom eingestrahlten Licht aufweisen. 3∞[Sr0.95Eu0.05(Im)2], 3∞[Tb(Im)3] und 3∞[Ce(Im)3ImH]·ImH wurden auf ihre Fähigkeit untersucht, als potentielle Sensoren bzw. Detektoren für acht Lösungsmittel und für vier Gase zu fungie-ren. Unter dem Einfluss von Wasser wird die Lumineszenz aller drei Netzwerke sofort und vollständig gequencht. Der MeOH-Einfluss auf 3∞[Sr0.95Eu0.05(Im)2] führt zu einem bathochro-men Shift der Chromatizität von türkis zu orange. Die Lösungsmittel Aceton, Pyridin, Toluol, Hexan, Acetonitril und Dichlormethan führen zu turn-on-Effekten unterschiedlicher Stärke auf die Lumineszenzintensität von 3∞[Sr0.95Eu0.05(Im)2] und 3∞[Tb(Im)3]. Die Lumineszenz von 3∞[Ce(Im)3ImH]·ImH erfährt nur durch Acetonitril und Dichlormethan einen turn-on-Effekt, die übrigen Solventien führen zu einem turn-off-Effekt. Die Gasexpositionen führten im Fall der Polymere 3∞[Tb(Im)3] und 3∞[Ce(Im)3ImH]·ImH zu ei-nem turn-off-Effekt durch O2 und CO2 auf die Lumineszenz, wohingegen die Lumineszenz von 3∞[Sr0.95Eu0.05(Im)2] durch die untersuchten Gase N2, Ar, O2 und CO2 nicht beeinflusst wer-den konnte. In dieser Arbeit konnten mit den beiden neuen Koordinationspolyme-ren 3∞[La4(Im)12(ImH)5]∙xImH (x = 2 - 3) und 3∞[Gd(Im)3] fehlende Glieder in der Reihe der Sel-ten-Erd-Imidazolate synthetisiert und vollständig charakterisiert werden. Beide Gerüste so-wie die bereits bekannten Erdalkali-Imidazolate 2∞[Ca(Im)2(ImH)2], 3∞[Sr(Im)2] und 3∞[Ba(Im)2] und die Selten-Erd-Imidazolate 3∞[Y(Im)3], 3∞[Ln(Im)3ImH]·ImH (Ln = Ce, Pr, Nd, Sm), 3∞[Gd2(Im)6(ImH)1.5]·0.5 ImH und 3∞[Tb(Im)3] konnten als Wirtsgitter für die intrinsisch lumineszierenden Ln-Ionen Ce3+, Sm3+, Eu2+, Tb3+, Dy3+ und Yb3+ erfolgreich verwendet wer-den. Über Co-Dotierungen hinaus wurden auch größere Bereiche der Mischbarkeiten sowie das Auftreten von eventuellen Phasengrenzen untersucht. Die erhaltenen Bulkmaterialien wurden auf Struktur-Eigenschafts-Beziehungen sowie auf ein Farbtuning der Lumineszenz durch additive Farbmischung der zugrundeliegenden Emissionsfarben untersucht. Die Synthesestrategie der solvensfreien Schmelzsynthese konnte erfolgreich auf die Erdalka-li- und Lanthanidmetalle und den bicyclischen Liganden 1H-Benzimidazol übertragen wer-den. Es wurden neben den monomeren Komplexen [M(BIm)2(BImH)4] (M = Ca, Sr, Eu) die zweidimensionalen Koordinationspolymere ²[EA(BIm)2] (EA = Mg, Ba) synthetisiert und voll-ständig charakterisiert. Das Ba-Netzwerk tritt zudem in zwei Polymorphen auf. Im Fall der Umsetzung der Lanthanidmetalle konnte ²[Eu(BIm)2(BImH)2] erfolgreich synthetisiert und charakterisiert werden. KW - Metallorganisches Netzwerk KW - Lanthanoide KW - Erdalkalimetalle KW - Photolumineszenz KW - Mischbarkeit KW - Koordinationspolymere KW - coordination polymer KW - MOF KW - Beschichtungen KW - lumineszenzbasierte Detektoren KW - metal-organic framework KW - coatings KW - luminescence based detectors KW - Metallorganische Gerüstverbindung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-121501 ER - TY - THES A1 - Dannenbauer, Nicole T1 - Koordinationspolymere und -verbindungen mit intrinsischer Lumineszenz auf Basis von Selten-Erd-Chloriden, Thiazol, Thiolaten und Amin-Co-Liganden T1 - Coordination polymers and compounds with intrinsic luminescence based on rare earth chlorides, thiazole, thiolates and amine co-ligands N2 - In dieser Arbeit konnten 69 neue und neuartige Koordinationspolymere sowie Komplexe mit schwefelhaltigen Liganden auf Selten-Erd-Chlorid-Basis synthetisiert und strukturell charak-terisiert werden. Durch die Umsetzung der Chloride mit dem Liganden Thiazol konnten bei Raumtemperatur, abhängig vom Ionenradius und der eingesetzten Menge Thiazol, sowohl Koordinationspolymere wie 1∞[LnCl3(thz)6]·thz (Ln = La, Ce), dimere Komplexe [Ln2Cl6(thz)8]·3(thz) (Ln = La, Ce, Pr, Nd), [Pr2Cl6(thz)8] sowie monomere Komplexe [LnCl3(thz)4]2·thz (Ln = Sm , Eu , Tb, Ho) erhalten werden. Mittels temperaturabhängiger Pulverdiffraktometrie und in-situ Infra-rotspektroskopie sowie DTA/TG-Messungen konnte exemplarisch an 1∞[LaCl3(thz)6]·thz und [Pr2Cl6(thz)8] gezeigt werden, dass stufenweise thermisch bedingt Thiazolmoleküle aus den Strukturen abgegeben werden bis hin zur Rückbildung des eingesetzten LnCl3. Unter der Vo-raussetzung, dass die flüchtige Komponente Thiazol resorbiert wird, ist daher ein Kreispro-zess denkbar. Ferner konnten zusätzlich wasserhaltige Phasen wie der vierkernige Cluster [Pr4Cl10(OH)2(thz)8(H2O)2] erhalten werden. Durch die Zugabe eines geeigneten Linkermoleküls in das Reaktionssystem aus trivalenten Lanthanidchloriden und Thiazol konnten unter solvothermalen Bedingungen eine Vielzahl an Koordinationspolymeren und Komplexen erhalten werden. Als Linker oder als end-on Ligan-den eigneten sich sowohl eine Reihe an ditopischer Pyridylliganden 4,4'-Biypridin (bipy), 1,2-Di-(4-pyridyl)ethen (dpe), trans-1-(2-Pyridyl)-2-(4-pyridyl)ethylen (tppe), 1,2-Di-(4-pyridyl)ethan (dpa), sowie die Diazine Pyrazin (pyz) und Pyrimidin (pym) oder auch Azole wie 1,2,4-Triazol (tzH) und Pyrazol (pzH). Mittels Einkristallstrukturanalyse und pulverdiffrakto-metrischer Methoden konnten die dreidimensionalen Gerüstverbindungen 3∞[LnCl3(dpa)2]·thz (Ln = Ce - Sm, Gd - Lu), die Schichtstrukturen 2∞[Ln2Cl6(bipy)3(thz)2]·thz (Ln = La, Ce), 2∞[LnCl3(tzH)2(thz)]·thz (Ln = Pr, Sm - Gd) und die strangartigen Koordinationspolymere 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Pr, Nd), 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Sm, Eu - Er, Yb), 1∞[Ln2Cl6(dpe)2(thz)4]·dpe (Ln = Ce, Nd), 1∞[LnCl3(dpe)(thz)2]· 0.5 (dpe) 0.5 (thz) (Ln = Sm, Gd - Dy, Er, Yb), 1∞[HoCl3(dpe)(thz)2]·thz, 1∞[La2Cl6(dpa)(thz)6], 1∞[Pr2Cl6(pyz) (thz)6], 1∞[Ln2Cl6(tzH)4(thz)2] (Ln = Pr, Sm, Gd) sowie die Komplexe [LnCl3(tppe)2(thz)2] (Ln = Nd, Tb, Ho, Er), [Ln2Cl6(pyz)(thz)6]·2(thz) (Ln = Tb, Er), [Ln2Cl6(pym)2(thz)4] (Ln = Tb , Er), [LnCl3(pzH)3(thz)2] (Ln = Pr, Gd) charakterisiert werden.   Ferner konnten die erhaltenen Verbindungen weitestgehend auf ihre photolumineszenz-spektroskopischen sowie thermischen Eigenschaften hin untersucht werden. Außerdem konn-ten auch durch direkte Schwefelkoordination an die Ln3+-Zentren eindimensionale Koordina-tionspolymere 1∞[PrCl2(amt)(py)3] (amt- = 3-Amino-5-mercapto-1,2,4-triazolat), [HNEt3]1∞[LnCl2(amt)2] (Ln = Ho, Er) und Komplexe [LnCl2(Mbim)(py)3]·py (Ln = Y, Er; Mbim = 2-Mercaptobenzimdiazolat) generiert werden N2 - This thesis deals with the structural characterization of 69 novel coordination polymers and complexes synthesized with sulfur containing heterocyclic ligands and trivalent rare earth chlorides. Depending on the ionic radii of the used lanthanide chloride and the amount of the ligand thiazole coordination polymers as 1∞[LnCl3(thz)6]·thz (Ln = La, Ce), dimeric compounds [Ln2Cl6(thz)8]·3(thz) (Ln = La, Ce, Pr, Nd), [Pr2Cl6(thz)8] and monomeric complexes [LnCl3(thz)4]2·thz (Ln = Sm, Eu , Tb, Ho) were derived at room temperature. Using tempera-ture-dependent powder diffraction methods, in-situ IR-spectroscopy and DTA/TG measure-ments it was demonstrated that there is a stepwise, thermal induced release of thiazole molecules out of the structures to back-formation of crystalline lanthanide chloride in the cases of the coordination polymer 1∞[LaCl3(thz)6]·thz and the dimer [Pr2Cl6(thz)8]. This could be a cyclic process requiring the elusive ligand thiazole to be reabsorbed. Furthermore, hy-drous phases were also obtained like the tetranuclear cluster [Pr4Cl10(OH)2(thz)8(H2O)2]. It was possible to generate a series of various coordination polymers and complexes under solvothermal conditions adding suitable linker molecules into the reaction system of lantha-nide chloride and thiazole. Suitable linkers or end-on ligands are a range of ditopic pyridyl ligands like 4,4'-biypridine (bipy), 1,2-di-(4-pyridyl)ethene (dpe), trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (tppe), 1,2-di-(4-pyridyl)ethane (dpa), diazine as pyrazine (pyz) and pyrimi-dine (pym) as well as azole like 1,2,4-triazole (tzH) and pyrazole (pzH). By single-X-ray struc-ture determination and powder diffraction it was possible to characterize three dimensional networks 3∞[LnCl3(dpa)2]·thz (Ln = Ce - Sm, Gd - Lu), layer structures 2∞[Ln2Cl6(bipy)3(thz)2]·thz (Ln = La, Ce), 2∞[LnCl3(tzH)2(thz)]·thz (Ln = Pr, Sm - Gd) and strand like coordination polymers 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Pr, Nd), 1∞[LnCl3(bipy)(thz)2]·thz (Ln = Sm, Eu - Er, Yb), 1∞[Ln2Cl6(dpe)2(thz)4]·dpe (Ln = Ce, Nd), 1∞[LnCl3(dpe)(thz)2]·0.5 (dpe) 0.5 (thz) (Ln = Sm, Gd - Dy, Er, Yb), 1∞[HoCl3(dpe)(thz)2]·thz, 1∞[La2Cl6(dpa)(thz)6], 1∞[Pr2Cl6(pyz) (thz)6], 1∞[Ln2Cl6(tzH)4(thz)2] (Ln = Pr, Sm, Gd) as well as the complexes [LnCl3(tppe)2(thz)2] (Ln = Nd, Tb, Ho, Er), [Ln2Cl6(pyz)(thz)6]·2(thz) (Ln = Tb, Er), [Ln2Cl6(pym)2(thz)4] (Ln = Tb , Er), [LnCl3(pyr)3(thz)2] (Ln = Pr, Gd). Furthermore, nearly all of the generated structures were investigated with regards to their photoluminescent and thermal properties.   Moreover, one dimensional coordination polymers 1∞[PrCl2(amt)(py)3] (amt- = 3-amino-5-mercapto-1,2,4-triazolate), [HNEt3]1∞[LnCl2(amt)2] (Ln = Ho, Er) and complexes [LnCl2(Mbim)(py)3]·py (Ln = Y, Er; Mbim = 2-mercaptobenzimdiazolate) were obtained by direct coordination of sulfur at Ln3+-centers. KW - Lanthanoide KW - Polymerkomplexe KW - Photolumineszenz KW - Thiolate KW - Thiazole KW - Selten-Erd-Chloride KW - Koordinationspolymere KW - Lumineszenz KW - Thiazol KW - rare earth chlorides KW - coordination polymers KW - luminescence KW - thiazole Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136218 ER - TY - THES A1 - Brede, Franziska Andrea T1 - Synthesestrategien und Struktur-Eigenschafts-Beziehungen anorganisch-organischer Hybridmaterialien basierend auf 3d-Übergangsmetallchloriden und N-heterozyklischen Liganden T1 - Synthesis strategies and structure-property relations of inorganic-organic hybrid materials based on 3d-transition metal chlorides and N-heterocyclic ligands N2 - Die vorliegende Arbeit umfasst die Synthese, die Untersuchung von Struktur-Eigenschafts-Beziehungen und Eigenschaftsmodifikationen von Komplexen und Koordinationspolymeren basierend auf den 3d-Übergangsmetallchloriden von Mn, Fe, Co sowie Zn und N-heterozyklischen Liganden. Durch die Kombination von mechanochemische Umsetzungen, mikrowellenassistierten Synthesen, solvensassistierten, solvothermalen und solvensfreien Reaktionen zu verschiedenen Synthesestrategien wurden 23 neue Koordinationsverbindungen synthetisiert und charakterisiert. Ausgehend von den auf mechanochemischem Weg synthetisierten, monomeren Precursor-Komplexen [MCl2(TzH)4] (M = Mn und Fe) konnten die höhervernetzten Koordinationspolymere 1∞[FeCl(TzH)2]Cl und 1∞[MCl2(TzH)] (M = Fe und Mn) durch thermische und mikrowelleninduzierte Konversionsreaktionen als phasenreine Bulkprodukte erhalten werden. Die sukzessive Abgabe organischer Liganden und die damit verbundene Umwandlung in die höhervernetzten Spezies wurden dabei mittels temperaturabhängiger Pulverdiffraktometrie und simultanem DTA/TG-Verfahren analysiert. Durch gezielte Variation der Lösungsmittel beim Liquid-assisted grinding, der mechanochemischen Synthese unter Zugabe einer flüssigen Phase, konnten die beiden polymorphen Koordinationspolymere α-1∞[MnCl2(BtzH)2] und β-1∞[MnCl2(BtzH)2] erhalten werden, die im monoklinen bzw. orthorhombischen Kristallsystem kristallisieren. Solvensassistierte Umsetzungen von MnCl2 mit 1,2,4-1H-Triazol (TzH) unter Zugabe von Hilfsbasen resultierten unter anderem in der Bildung der dreidimensionalen Koordinationspolymere 3∞[MnCl(Tz)(TzH)] und 3∞{[Mn5Cl3(Tz)7(TzH)2]}2·NEt3HCl. Die Untersuchung von Struktur-Eigenschafts-Korrelationen erfolgte systematisch an ausgewählten Verbindungen hinsichtlich ihrer dielektrischen Eigenschaften. Dabei wurden die Einflüsse intra- und intermolekularer Wechselwirkungen auf die strukturelle Rigidität und die daraus folgenden Polarisierbarkeitseigenschaften analysiert und miteinander verglichen. Die gemessenen dielektrischen Konstanten erstrecken sich von Werten im high-k-Bereich für monomere Komplexe bis hin zu den nahezu frequenzunabhängigen low-k-Werten der eindimensionalen Koordinationspolymere 1∞[MnCl2(TzH)] und 1∞[MnCl2(BtzH)2] sowie der Komplexe [ZnCl2(TzH)2] und [ZnCl2(BtzH)2]·BtzH. Eigenschaftsmodifikationen und -optimierungen der synthetisierten Verbindungen er-folgten zum einen durch Erzeugung flexibler Kunststofffilme, in welche die eindimensionalen Koordinationspolymere 1∞[MCl2(TzH)] (M = Fe und Mn) eingebettet wurden. Zum anderen konnten in mechanochemischen Umsetzungen superparamagnetische Kompositpartikel bestehend aus einem Fe3O4/SiO2-Kern und einer kristallinen [ZnCl2(TzH)2]-Hülle erhalten werden, die in situ aus den Edukten ZnCl2 und TzH synthetisiert wurde. N2 - This thesis deals with the synthesis, the investigation of structure-property-relations and property modifications of complexes and coordination polymers based on 3d-transition metal chlorides of Mn, Fe, Co and Zn and N-heterocyclic ligands. The combination of different synthesis strategies including mechanochemistry, micro-wave-assisted reactions, solvothermal, solvent-assisted and solvent-free approaches results in the formation and characterization of 23 new coordination compounds. The utilization of the mechanochemically synthesized, monomeric complexes [MCl2(TzH)4] (M = Mn and Fe) as precursors yield the higher dimensional coordination polymers 1∞[FeCl(TzH)2]Cl and 1∞[MCl2(TzH)] (M = Fe and Mn) as phase-pure bulk products by thermal or microwave-induced conversion reactions. The stepwise release of organic ligands and the formation of the high-temperature species was monitored and determined via temperature-dependent powder diffraction as well as simultaneous DTA/TG analysis. Depending on the utilized solvent, liquid-assisted grinding of MnCl2 and BtzH leads to the formation of the two polymorphous coordination polymers α-1∞[MnCl2(BtzH)2] and β-1∞[MnCl2(BtzH)2], crystallizing either in the orthorhombic or in the monoclinic crystal system. Solvothermal reactions of MnCl2 and 1,2,4-1H-triazole (TzH) with additional amounts of assistant bases exhibit the two three-dimensional coordination poly-mers 3∞[MnCl(Tz)(TzH)] and 3∞{[Mn5Cl3(Tz)7(TzH)2]}2·NEt3HCl. The investigation of structure-property-correlations was carried out systematically by determining the dielectric properties of selected compounds. The influences of intra- and intermolecular interactions on the structural rigidity and the resulting polarizabil-ity were investigated. The dielectric constants range from high-k values for monomeric complexes to almost frequency-independent low-k values for the one-dimensional co-ordination polymers 1∞[MnCl2(TzH)] and 1∞[MnCl2(BtzH)2] as well as the complexes [ZnCl2(TzH)2] and [ZnCl2(BtzH)2]·BtzH. On the one hand, modifications of the compounds' properties were achieved by em-bedding the coordination polymers 1∞[MCl2(TzH)] (M = Fe and Mn) in flexible plastic films. On the other hand, via mechanochemical approaches, a superparamagnetic com-posite material was obtained by in situ formation of the crystalline complex [ZnCl2(TzH)2] (3) on Fe3O4/SiO2 microparticle cores. KW - Komplexe KW - Mechanochemie KW - Mikropartikel KW - Heterocyclische Verbindungen KW - Übergangsmetallchloride KW - Thermische Konversion KW - Organisch-anorganischer Hybridwerkstoff KW - Koordinationsverbindung KW - Struktur-Eigenschafts-Beziehung KW - Permittivität Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-138146 ER - TY - THES A1 - Schönfeld, Fabian T1 - Solvensfreie Synthese von Übergangsmetall-azolat- und -azin-Netzwerken mit Struktureigenschaftsbeziehungen bezüglich Polarisierbarkeit und sorptionsabhängiger Lumineszenz T1 - Solvent-free Synthesis of transition metal azolate and azine frameworks with structure/property relations regarding polarisability and sorption-dependent luminescence N2 - Diese Arbeit befasst sich mit der Verwendung einer solvensfreien Synthesese zur Darstellung koordinationspolymerer Verbindungen basierend auf den 3d-Übergangsmetallen Mn, Fe, Co und Zn und N-heterozyklischen, aminischen Ligandenschmelzen. Die eingesetzten Metalle wurden entweder in ihrer elementaren Form in einer bereits bekannten, redox-basierten Synthese oder als Metallchloride in einer adduktbasierten Synthese verwendet. Synthesen mit den Liganden Imidazol (ImH), Pyrazol (PzH), Benzimidazol (bzImH), 1,2,3-Triazol (1,2,3-TzH), 1,2,4,-Triazol (1,2,4-TzH) und Piperazin (pipz) führten zu verschiedenen neuen Verbindungen und Kristallstrukturen, speziell bei Verwendung des Liganden pipz. Die erhaltenen Produkte wurden für Untersuchungen von Struktureigenschafts-beziehungen hinsichtlich des Polarisationsverhaltens und im Falle der 1,2,3-Triazolate für eine Untersuchung von Photolumineszenzeigenschaften in Abhängigkeit von Physisorptionsprozessen verwendet. Unter den Piperazin-Verbindungen findet sich eine starke Varianz im Bereich des polymeren Charakters und des Vernetzungsgrades, welcher von Komplexen (null-dimensional) wie [CoCl2(pipz)] (26) and [ZnCl2(pipz)] (27) über Stränge (eindimensional) wie 1∞[ÜMCl2(py)2(pipz)] (ÜM = Mn (29), Fe (30), Co (31)) bis hin zu Netzen (zweidimensional) wie 2∞[Fe2Cl4(pipz)3]∙(pipz) (25) und Gerüsten (dreidimensional) wie 3∞[FeCl2(pipz)] (32) reicht. Thermoanalyse und darauf basierende Veränderungen in den Reaktionsbedingungen ermöglichen es, die Zusammenhänge zwischen den einzelnen Phasen aufzuzeigen und ihre thermodynamischen Stabilitäten zu untersuchen, was nicht nur für die Piperazin-Verbindungen, sondern auch für andere Systeme gelang, von denen die größte Gruppe die Imidazolate des Typs 3∞[ÜM3(Im)6(ImH)2] (ÜM = Mn (1), Fe (2), Co (3)) waren. Der erfolgreiche Zusatz von geringen Mengen Mn2+ in das MOF 3∞[Zn(1,2,3-Tz)2] (21) führt zur Bildung der Phase 3∞[Zn0,9Mn0,1(1,2,3-Tz)2] (22) und zur Aktivierung von Photolumineszenz unter Beibehaltung von Mikroporosität. Das erhaltene lumineszierende, mikroporöse Gerüst wurde als Modellsystem für die Analyse von Lumineszenzänderungen während der Physisorption verschiedener Analysegase und bei unterschiedlichen Temperaturen verwendet. Die erhaltenen Ergebnisse können eine wichtige Rolle bei der Charakterisierung potentieller Sensormaterialien spielen und sind weiterhin ein möglicher Ausgangspunkt für mechanistische Überlegungen bei diesen hochinteressanten Struktureigenschaftsbeziehungen. Die erfolgreiche Redoxreaktion elementarer Metalle mit den Liganden ImH, PzH, bzImH und 1,2,3-TzH erlaubte eine Untersuchung dielektrischer Eigenschaften einer Gruppe von verwandten Verbindungen bezüglich verschiedener Probenformen (Pulverschüttungen gegenüber gepressten Pellets) und Strukturmerkmale wie Rigidität der Kristallstrukturen. Diese Eigenschaften wurden darüber hinaus auch temperaturabhängig in einem Bereich von -100 °C bis 150 °C untersucht. Weiterhin konnte mit Untersuchungen an den MOFs 3∞[ÜM(1,2,3-Tz)2] (ÜM = Mn (18), Fe (19), Co (20), Zn (21)) auch ein Beitrag zu einem Feld der MOF-Chemie geleistet werden, welches bereits stark diskutiert wurde, jedoch bislang nur sehr schwach erforscht ist. N2 - This work elaborates on the use of solvent free approach towards the generation of coordination polymers based on the 3d transition metals Mn, Fe, Co and Zn by use of N-heterocyclic amine ligand melts. Metals employed were either used as elemental metals in a redox-based approach derived from previous works or in the form of metal chlorides in an adduct-based strategy. Products obtained from reactions with the ligands imidazole (ImH), pyrazole (PzH), benzimidazole (bzImH), 1,2,3-triazole (1,2,3-TzH), 1,2,4-triazole (1,2,4-TzH) and piperazine (pipz) led to a variety of new compounds and crystal structures, especially with the ligand piperazine. The obtained products were subsequently used for studies in structure-property relations in the fields of polarizability and in the case of the triazolate frameworks for investigations into the dependence between luminescent properties and physisorption properties. Among these newly discovered and characterized compounds, the polymeric character and degree of linkage varies from complexes (zero-dimensional) such as [CoCl2(pipz)] (26) and [ZnCl2(pipz)] (27), to strands (one-dimensional) such as 1∞[TMCl2(py)2(pipz)] (TM = Mn (29), Fe (30), Co (31)), nets (two-dimensional) such as 2∞[Fe2Cl4(pipz)3]∙(pipz) (25) and frameworks (three-dimensional) such as 3∞[FeCl2(pipz)] (32). Thermal analysis and subsequent changes in reaction conditions were able to show the relations between the obtained products and their thermodynamic stability not only in the aforementioned products, but also for a number of previously known compounds, most notably the imidazolates 3∞[TM3(Im)6(ImH)2] (TM = Mn (1), Fe (2), Co (3)). Introducing small quantities of Mn2+ into the metal organic framework (MOF) 3∞[Zn(1,2,3-Tz)2] (21) leads to the compound 3∞[Zn0,9Mn0,1(1,2,3-Tz)2] (22) and activation of photoluminescent properties whilst retaining initial microporosity. This luminescent, microporous framework was used as a model system for the analysis of changes in photoluminescence during physisorption of several analyst gases at different temperatures. The obtained results could play a highly important role for the characterization of potential sensor materials and can be employed as a step-stone for mechanistic considerations in these highly interesting structure-property relations. The successful redox-reactions of elemental metals with the ligands ImH, PzH, bzImH and 1,2,3-TzH allowed for an investigation of dielectric properties, comparing the influence of sample composition (compacted powders vs. mechanically prepared pellets) as well as structural features such as rigidity of crystal structures and their dimensional linkage on the permittivity of a family of compounds with very similar compositions. Additionally, these properties were also analysed with regards to changes in temperatures ranging from -100 °C and up to 150 °C. In this particular instance, the analysis of dielectric properties conducted on the MOFs 3∞[TM(1,2,3-Tz)2] (TM = Mn (18), Fe (19), Co (20), Zn (21)) contributes to another highly important field of properties in MOF chemistry, which has been discussed for quite some time, but is still underdeveloped. KW - Festkörperchemie KW - Polymerkomplexe KW - Lumineszenz KW - Mikroporosität KW - Polarisierbarkeit KW - Festkörperchemie KW - Koordinationspolymere KW - Lumineszenz KW - Mikroporosität KW - Polarisierbarkeit Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115035 ER - TY - THES A1 - Matthes, Philipp Robert T1 - Neue Ln-N-Koordinationspolymere und MOFs als Hybridmaterialien für effektive Lumineszenz und neuartige Phosphore T1 - New Ln-N-coordination polymers and MOFs as hybrid materials for effective luminescence and new phosphors N2 - In der vorliegenden Arbeit wird die Darstellung und Charakterisierung von Komplexen, Koordinationspolymeren und MOFs auf der Basis von dreiwertigen Lanthanidchloriden und verschiedenen verbrückenden Azin- und Diazin-Liganden beschrieben. Ziel war es neuartige Koordinationspolymere mit effektiven Photolumineszenzeigenschaften zu generieren. Es konnten 44 neue organisch-anorganische Hybridmaterialien präsentiert werden. Der Fokus der Arbeit lag neben der strukturellen Charakterisierung auf der Bestimmung der Photolumineszenzeigenschaften und der Betrachtung der thermischen Eigenschaften der Verbindungen. Bei solvothermalen Reaktionen von wasserfreien Lanthanidchloriden mit den Liganden 4,4‘-Bipyridin (bipy) und Pyridin (py) konnten die dinuklearen Komplexe [Ln2Cl6(bipy)(py)6] mit Ln = Y, Pr, Nd, Sm-Yb, die strangartigen Koordinationspolymere 1∞[LnCl3(bipy)(py)2]·(py) mit Ln = Gd-Er, Yb und 1∞[Lu2Cl5(bipy)2 (py)4]1∞[LuCl4(bipy)], sowie das 2D-Netzwerk 2∞[Ce2Cl6(bipy)4]·(py) synthetisiert und mithilfe der Röntgeneinkristallstrukturanalyse charakterisiert werden. Spektroskopische Untersuchungen an den Verbindungen ergaben außergewöhnliche Photolumineszenzeigenschaften auf der Basis von Ln3+-Ionen mit Emissionen im UV-VIS und NIR-Bereich. Im Falle des dinuklearen Komplexes konnten mithilfe der Ionen Y3+, Gd3+, Tb3+ und Eu3+ Lichtemission in den RGB-Grundfarben generiert werden. Der Einfluss salzsaurer Bedingungen führt zur Bildung der pyridiniumhaltigen Nebenphasen [Hpy]1∞[LnCl4(bipy)] mit Ln = Y, Tb), Yb, Lu, [Hpy]22∞[Sm2Cl8(bipy)3]·2(py) und [Hdpa] [EuCl4(dpa)]. Unter der Verwendung einer Schmelzsyntheseroute wurden die Verbindungen 3∞[La2Cl6(bipy)5] ·4(bipy) 2∞[Ln2Cl6(bipy)3]·2(bipy) mit Ln = Nd, Sm-Dy, Er, Yb und eine Dotierreihe mit Ln = Gd2-x-yEuxTy (x,y = 0-1), welche vor einigen Jahren im Arbeitskreis von Prof. Müller-Buschbaum et al. entdeckt wurden, dargestellt. Der Fokus der Arbeit lag hierbei auf der Bestimmung der Photolumineszenzeigenschaften der Netzwerke, wobei vor allem bei der Dotierreihe unter der Verwendung von Ln3+-zentrierter Emission ein stufenloses Farbtuning der Emissionsfarbe von grün nach rot erreicht werden konnte. Zusätzlich wurden an diesen Verbindungen systematische Untersuchungen zur strukturellen Aufklärung, der bei höheren Temperaturen entstehenden Netzwerk- und Gerüstverbindungen, durchgeführt. Hierbei konnten Kondensationsprodukte wie 3∞[LaCl3(bipy)], 2∞[Ln3Cl9(bipy)3] mit Ln = Pr, Sm, 2∞[Ho2Cl6(bipy)2] und 2∞[Gd2Cl6(qtpy)(bpy)]·(bipy) strukturell aufgeklärt werden. Die Übertragung der solvothermalen Syntheseroute unter der Verwendung von Pyridin auf die gegenüber bipy verlängerten Azin-Liganden Dipyridylethen (dpe) bzw. –ethan (dpa) erwies sich als erfolgreich und resultierte in eine Erweiterung der Strukturchemie durch die Darstellung der lumineszierenden Koordinations-polymere 2∞[La2Cl6(dpe)3(py)2]·(dpe), 1∞[LnCl3(dpe)(py)2]·0.5(dpe)0.5(py) mit Ln = Eu, Gd, Er, 2∞[LaCl3(dpa)2]·(dpa) und 1∞[LnCl3(dpa)(py)2]·0.5(dpa)0.5(py) mit Ln = Gd, Er. Eine Verkürzung des bipy-Liganden in Form der Di-Azinen wie Pyrazin (pyz), Pyrimidin (pym) und Pyridazin (pyd) und deren Umsetzung mit LnCl3 führte zur Bildung von Komplexen und polymeren Strukturen wie 3∞[LaCl3(pyz)], [Ln2Cl6(pyz)(py)6]·2(pyz) mit Ln = Sm, Er, 1∞[Sm2Cl6(μ-pym)2(pym)3]·(pym), [Er2Cl6(pym)6] und [ErCl3(η-pyd)(pyd)2] mit Lumineszenzeigenschaften auf der Basis der jeweiligen Liganden und Ln3+-Ionen. N2 - The present work is about the synthesis and characterization of complexes, coordination polymers and MOFs based on trivalent lanthanidechlorides and different bridging azine and diazine ligands. The creation of new coordination polymers with effective photoluminescent properties was a main goal of this thesis. Therefore, 44 new organic-inorganic hybrid-materials are presented in this work. Main focus of investigation was on structural characterization and determination of photoluminescence and thermal properties of the synthesized compounds. Solvothermal reactions of anhydrous lanthanidechlorides with the ligand 4,4‘-bipyridine (bipy) and pyridine (py) lead to dinuclear complexes [Ln2Cl6(bipy)(py)6] with Ln = Y, Pr, Nd, Sm-Yb, strand-like coordination polymers 1∞[LnCl3(bipy)(py)2]·(py) with Ln = Gd-Er, Yb and 1∞[Lu2Cl5(bipy)2(py)4]1∞[LuCl4(bipy)] and also 2D-networks like 2∞[Ce2Cl6(bipy)4]·(py) could be obtained and characterized by single-crystal-X-ray-stucture-determination. Spectroscopic investigations revealed extraordinary photoluminescence properties based on Ln3+-ions with light emission in the UV-VIS and NIR range. Especially the dinuclear complexes containing Y3+, Gd3+, Eu3+ and Tb3+ ions showed the RGB basic colors, allowing color tuning in the visible range. The influence of hydrochloric conditions lead to the formation of the pyridinium containing side phases [Hpy]1∞[LnCl4(bipy)] with Ln = Y, Tb, Yb, Lu, [Hpy]22∞[Sm2Cl8(bipy)3]·2(py) and [Hdpa]1∞[EuCl4(dpa)]. Furthermore, the compounds 3∞[La2Cl6(bipy)5]·4(bipy), 2∞[Ln2Cl6(bipy)3]·2(bipy) with Ln = Nd, Sm-Dy, Er, Yb and a solid solution with Ln = Gd2-x-yEuxTy (x,y = 0-1), which were discovered in the research group of Prof. Müller-Buschbaum et al., were synthesized by using a melt-synthesis route. Hereby, the emphasis was on the investigation of photoluminescence properties of the networks, most notably the color tuning properties based on Ln3+centered emission of the solid solution in the color range from green to red. Additionally, systematic investigations were performed on the networks for the determination of high-temperature dependent structural changes, leading to the structural characterization of the structural condensation products 3∞[LaCl3(bipy)], 2∞[Ln3Cl9(bipy)3] with Ln = Pr, Sm, 2∞[Ho2Cl6(bipy)2] and 2∞[Gd2Cl6(qtpy)(bipy)]·(bipy). The transfer of the solvothermal reaction route with the use of pyridine as solvent on the ligands dipyridylethene (dpe) and -ethane (dpa) was successful, also leading to luminescent coordination polymers in 2∞[La2Cl6(dpe)3(py)2]·(dpe), 1∞[LnCl3(dpe)(py)2]·0.5(dpe)0.5(py) wih Ln = Eu, Gd, Er, 2∞[LaCl3(dpa)2]·(dpa) and 1∞[LnCl3(dpa)(py)2]·0.5(dpa)0.5(py) with Ln = Gd, Er. The shortening of the bipy ligand by using diazines, like pyrazine (pyz), pyrimidine (pym) and pyridazine (pyd) as connector ligands, resulted in the extension of coordination compounds based on LnCl3 and diazine building blocks. Therefore, complexes and coordination polymers like 3∞[LaCl3(pyz)], [Ln2Cl6(pyz)(py)6]·2(pyz) with Ln = Sm, Er, 1∞[Sm2Cl6(μ-pym)2(pym)3]·(pym), [Er2Cl6(pym)6] and [ErCl3(η-pyd)(pyd)2] were discovered and characterized. Furthermore, first basic luminescence properties of the used ligands and their interaction with Ln3+-ions were investigated. KW - Lanthanoide KW - Metallorganisches Netzwerk KW - Polymerkomplexe KW - Photolumineszenz KW - Leuchtstoff KW - Lanthanoide KW - MOF KW - Koordinationspolymer KW - Azine / Diazine KW - Photolumineszenz KW - lanthanides KW - coordination polymer KW - metal-organic frameworks KW - photoluminescence KW - azines / diazines Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-109519 ER - TY - THES A1 - Siedler, Eva T1 - Reaktivitätsstudien an terminalen Alkylborylenkomplexen T1 - Studies on the reactivity of terminal alkyl borylene complexes N2 - Im Rahmen der Dissertation wurde die Reaktivitat des terminalen Mangan-Borylenkomplexes gegenüber verschiedenen polaren Doppelbindungssystemen, koordinativ ungesattigten Übergangsmetallfragmenten sowie Lewis-Basen untersucht. Mithilfe der spektroskopischen und strukturellen Daten der dabei synthetisierten Verbindungen konnten neue Erkenntnisse uber die Natur der Metall-Bor-Bindung erlangt werden. N2 - This work aims to investigate the reactivity of a terminal manganese borylene complex towards a range of polar unsaturated substrates as well as transition metal complexes and Lewis bases. Thereby, discussion of the spectroscopical and structural data of the prepared compounds helps to determine the nature of the metal-boron bond. KW - Borylene KW - Übergangsmetallborylen, Borylentransfer, Basenstabilisiertes Borylen, Metathese KW - Reaktivität Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93882 ER - TY - THES A1 - Christ, Bastian T1 - Synthese, Fabrikation und Charakterisierung eines faserförmigen Zellträgermaterials auf Basis von Titan-oxo-carboxo-Clustern T1 - Synthesis, fabrication and characterization of a fibrous scaffold based on titanium-oxo-carboxo-clusters N2 - In dieser Arbeit konnten ethanolische Sole aus TEOT und der metabolisierbaren α-Hydroxycarbonsäure Milchsäure (LA) in spinnfähige viskose Spinnmassen überführt werden und erstmalig über die Methode des Druckspinnens zu Mikrofasern prozessiert werden. Die hybriden Fasern sind intrinsisch stabil. Über FTIR- und 13C-MAS-NMR-Untersuchungen konnte gezeigt werden, dass in der Faser der Koordinationsmodus von LA an Ti sowohl im mono- als auch im bidentaten Modus (Nomenklatur bezogen auf die Säureeinheit) vorliegt. Die nähere Untersuchung des Degradationsverhaltens einer LA-Faser zeigte hauptsächlich die Freisetzung von Lactat und Ethanol innerhalb weniger Stunden. Danach kann kaum noch ein Massenverlust der Fasern nachgewiesen werden. Vermutlich ist die Degradationsgeschwindigkeit abhängig von der Sättigungskonzentration der wasserlöslichen Titanoxid-Spezies Ti(OH)4 und Ti(O)(OH)2. Die Löslichkeit dieser Verbindungen beträgt ca. 1 µmol/L. Die Freisetzung von Titanverbindungen an das Degradationsmedium konnte über ICP-Messungen und indirekt auch über NMR-Messungen der Degradationsprodukte in Lösung nachgewiesen werden. Nach ca. einer Woche in Lösung bildet sich der wasserlösliche metallorganische Komplex TiBALDH. Dieser Komplex zeigt keinen negativen Einfluss auf die Umwelt, so dass Zellkulturmedien, die in Kontakt mit den Fasermaterialien getreten sind, in Zukunft nach dem Autoklavieren gefahrlos entsorgt werden können. Zudem sollte keines der detektierten Abbauprodukte in den abgegebenen Mengen toxisch auf den humanen Organismus bei in vivo-Anwendungen wirken. Lactat und Ethanol können im menschlichen Organismus verstoffwechselt werden. TIBALDH ist dem im menschlichen Serum nachweisbaren Titan(IV)citrat-Komplex strukturell sehr ähnlich. Aufgrund der Tatsache, dass die Bildung von TiBALDH ca. 1 Woche dauert, ist die vorherige Bildung des Titan(IV)citrat-Komplexes im humanen Organismus wahrscheinlich. Weiterhin konnte das hybride Fasermaterial durch den Zusatz von basischen Stoffen neutralisiert werden und nach Vorkonditionierung der Fasern als nicht zytotoxisch eingestuft werden. Als Gegenionen wurde Ammonium, das biogene Amin Phenethylamin, die Aminosäure Phenylalanin und das Biopolymer CHI getestet. Für zukünftige Weiterentwicklungen können auch basische Wirkstoffe als Gegenionen herangezogen werden. Somit könnte das hybride Zellträgermaterial zusätzlich eine Drug-Delivery-Funktion erhalten. Die LA-Fasern verhalten sich nach dem Verspinnen sehr flexibel. Bei einer Lagerung bei RT jedoch verspröden diese sehr schnell innerhalb von 3 d. Diese Materialeigenschaft wurde im zweiten Teil der Arbeit näher untersucht und optimiert. Tempern des Fasermaterials bei 170 °C bewirkte eine Umlagerung der LA-Liganden zu AA-Liganden, aber keine Verbesserung der mechanischen Eigenschaften. Versuche einer getemperten LA-Faser mit CHI als Gegenion zeigte durchwegs positive Eigenschaften in den Zytotoxizitätstests und auf deren Oberfläche konnten Zellen der Zelllinien L929, 16HBE, HTB94 und MG63 erfolgreich kultiviert werden. Durch die Verwendung anderer metabolisierbarer α Hydroxycarbonsäuren konnten Rückschlüsse auf die chemische Zusammensetzung der Fasern gezogen werden. Die Fasern scheinen aus wenig untereinander vernetzen Titan-oxo-carboxo-Clustern der Summenformel [Ti6O6(OR)6(Carboxylat)6] (mit R = H2+, H, Et oder „Ti6O6(OR)5(Carboxylat)6“) zu bestehen. Durch Variation der verwendeten Säuren konnten die Wechselwirkungen der Cluster untereinander verstärkt werden, so dass beispielsweise eine Faser mit MA bedeutend flexiblere Eigenschaften – auch bei einer Lagerung für 3d bei RT aufweist. Des Weiteren konnte durch Lagerung dieser Faser bei 4 °C der Versprödungsprozess für mind. 1 Monat gestoppt werden. Eine Lagerung von Medizinprodukten bei 4 °C stellt in Ländern mit ausreichender Infrastruktur kein Problem dar. Aufbauend auf diesen Tatsachen und TGA-MS-Messungen konnte die These aufgestellt werden, dass sich zwischen den wenig untereinander vernetzten Titan-oxo-carboxo-Cluster direkt nach dem Verspinnen noch Wassermoleküle befinden. Diese Reste an Wasser verleihen – vermutlich aufgrund der Ausbildung von Wasserstoffbrückenbindungen – der Faser flexible Eigenschaften. Bei einer Lagerung bei RT entweichen diese Wasserreste und die Faser versprödet; bei einer Lagerung bei 4°C wird das Verdampfen des restlichen Wassers bedeutend verlangsamt. Die Faser mit den flexibelsten Eigenschaften konnte letztendlich durch die Verwendung des zweizähnigen Carboxylat-Liganden MalA erhalten werden. Zusammenfassend konnte in dieser Arbeit ein neuartiges faserförmiges Material auf Basis von Titan-oxo-carboxo-Clustern produziert werden, welches großes Potential besitzt als Zellträgermaterial Anwendung zu finden. Aufbauend auf den hier gewonnenen Ergebnissen können die mechanischen Eigenschaften weiter optimiert und die Anforderungen des gewünschten Zielgewebes feinjustiert werden. Zudem besteht die Möglichkeit dem Material Drug-Delivery-Eigenschaften zu verleihen. Somit könnte das Scaffold aus Mikrofasern neben den bereits integrierten chemischen und physikalischen Stimuli (die Oberflächenfunktionalitäten und die Oberflächentopographie der Fasern) auch durch freigesetzte Wirkstoffe Zellen zur gewünschten Differenzierung anregen. N2 - In this thesis ethanolic sols out of the liquid sol gel precursor TEOT and metabolizable α-hydroxy carboxylic acids (e. g. LA) were transformed into spinnable viscous fluids and were processed for the first time to microfibers. These hybrid microfibers are intrinsic stable. FTIR- and 13C-MAS-NMR-measurements of the fibers show a monodentate as well as a bidentate coordination mode (with regard to the carboxylic unit) of LA to Ti. Degradation experiments show the release of lactate and ethanol within less hours. Afterwards no mass lost is detected anymore. The kinetics of fiber degradation might depend on the saturation concentration of the titanium oxide species Ti(OH)4 and Ti(O)(OH)2 in water. Their solubility in water is 1 µmol/L. The release of titanium containing compounds is detected indirectly by ICP- and NMR-measurements. This compound was identified as TIBALDH, which was shown having no negative impact on environment.[99, 160] Additionally the pH value of the hybrid fibers can be neutralized by adding basic compounds (ammonium, phenetylamine, phenylalanine or chitosan) to be classified as a non-cytotoxic material. LA fibers are very flexible after spinning. After storage at RT the fibers turn into a brittle material within 3 days. This property was investigated in the second part of the thesis. Fiber annealing at a temperature of 170 °C doesn’t result in an improvement of the mechanically properties. Nonetheless cytotoxicity assays of the annealed fibers show promising results and cell proliferation experiments show the proliferation of L929, 16HBE and HTB94 on the fibrous surface. Conclusion of the fiber composition can be drawn by using different metabolizable α-hydroxy carboxylic acids in fiber synthesis. Fibers seem to consist out of less crosslinked titanium-oxo-carboxo-clusters of the molecular formula [Ti6O6(OR)6(carboxylate)6] (with R = H2+, H, Et or „Ti6O6(OR)5(carboxylate)6“). By varying the carboxylates the interaction of the clusters can be enhanced. For instance a fibers with the acid MA shows better flexibility – even after storage at RT for 3 days. Additionally the brittling of fibers can be stopped for at least one months by a storage temperature of 4 °C. Referring to these results and TGA-measurements following hypothesis was put forward: Directly after fiber spinning water molecules are present in the small pores betwenn different titanium-oxo-carboxo-clusters. These water residuals reinforce fiber flexibility due to hydrogen bonds. After storing the fibers at RT residual water molecules will evaporate out of the fibers. Consequently the fibers are brittling. At a storage temperature of 4 °C the evaporation of water molecules is slowed down. Fibers containing MalA – an α-hydroxy carboxylic acid with two coordinating carboxylic groups – were determined as the most flexible fiber. KW - Scaffold KW - Mikrofaser KW - Zellträgermaterial KW - Mikrofasern Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-162015 ER - TY - THES A1 - Stangl, Johannes Maria T1 - Quantitative Feuchtesensorik mit lumineszierenden Ln-MOFs und Polymer-MOF-Matrix-Membranen T1 - Quantitative humidity sensning with luminescent Ln-MOFs and Polymer-MOF-Matrix-Membranes N2 - In der vorliegenden Arbeit werden die Sensorikeigenschaften der lumineszierenden metallorganischen Gerüstverbindungen (metal-organic frameworks, MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5), sowohl in Form der Bulksubstanzen als auch in Form von mixed-matrix membranes (MMMs) gegenüber den Analyten Wasser, Methanol, Ethanol und Isopropanol untersucht und mittels kinetischer Betrachtungen quantitativ beschrieben. Hierfür wurde ein Versuchsaufbau konstruiert, der den Anforderungen einer quantitativen Erfassung der Sensorikeigenschaften genügt und einflussgebende externe und interne Parameter, wie die Konzentration des Analyten, Temperatur, Druck, Probenmenge und Probenoberfläche standardisiert, um eine möglichst genaue Erfassung der auftretenden Veränderung der Lumineszenzintensität zu ermöglichen. Zusätzlich wurde eine mathematische Betrachtung genutzt, um die Ergebnisse der Experimente zu interpretieren und in einen Gesamtkontext zu setzen. Für jedes der fünf Modellsysteme wurde je eine Messreihe gegen ein breites Spektrum an relativen Feuchten (Wasser als Analyt) bei 25 °C durchgeführt. Der in allen Fällen auftretende Lumineszenzverlust ließ sich jeweils mittels einer Exponentialfunktion beschreiben und zur Bestimmung der konzentrationsabhängigen Reaktionskonstanten sowie der Halbwertszeiten nutzen. Die gewonnenen Informationen wurden verwendet, um die Reaktionskonstanten und die Schwellenwerte der Sensorik der jeweiligen Systeme zu bestimmten. In weiteren Versuchsreihen wurde der Messaufbau genutzt und der Einfluss der Alkohole Methanol, Ethanol und Isopropanol auf die Lumineszenz der MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) bei verschie-denen Konzentrationen in der Gasphase und bei unterschiedlichen Temperaturen untersucht, quantitativ bestimmt und gemäß der vorangegangen Messreihen für Feuchte beschrieben. Zusätzlich wurde die Veränderung des Lumineszenzmusters der MOFs ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) untersucht. Die Möglichkeiten der Prozessierung von ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), und ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) wurden im Hinblick auf eine praktische Anwendung im Bereich der Sensorik hin untersucht. Hierfür wurden die jeweiligen Bulksubstanzen via Dropcoating in die drei Polymere Polystyrol (PS), Polyvinychlorid (PVC) und Polymethylpenten (TPX) eingebettet. Die so dargestellten MMMs wurden auf ihre Sensorikeigenschaften hin untersucht und der Lumineszenzverlust wurde quantitativ beschrieben. Des Weiteren wurde die korrespondierende Bulksubstanz, in Bezug auf die (konzentrationsabhängigen) Reaktionskonstanten und Halbwertszeiten, mit den MMMs verglichen. Im Rahmen einer Kooperation mit der Arbeitsgruppe von Prof. Dr. Janiak der Heinrich-Heine-Universität Düsseldorf wurden die MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) und ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) in Polysulfon (PSF) eingebettet und ebenfalls auf ihre Fähigkeit zur Feuchtesensorik hin untersucht. Im Rahmen der vorliegenden Arbeit war es erstmals möglich, die Sensoreigenschaften der genutzten MOFs und CPs (1 - 5) quantitativ zu erfassen und mathematisch zu beschreiben. Ebenso konnte das entwickelte Sensorikkonzept erfolgreich auf die Erfassung von verschiedenen Alkoholen in der Gasphase übertragen werden (für System 1, 4 und 5). Anschließend war es möglich, die genutzten Modellsysteme 1, 2 und 4 unter dem Erhalt der Lumineszenzeigenschaft in verschiedene Polymere einzubetten und deren Eigenschaften zur Feuchtesensorik ebenfalls quantitativ zu erfassen und mathematisch zu beschreiben. Im letzten Abschnitt der Arbeit wurden die beiden porösen ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) und Zn(nmIm)2 (7) mit einer Terbiumnitratlösung behandelt, um durch die Füllung der Kavitäten die Lumineszenzeigenschaft der Terbiumionen in das ZIF zu implementieren. Der Grad und die Qualität der Befüllung wurden anschließend analytisch auf Lumineszenzeigenschaften hin untersucht. Hierbei konnte die Befüllung von Na-Rho-ZMOF (6) erfolgreich nachgewiesen werden, während es bei Zn(nmIm)2 (7) nicht zu einer Befüllung des Porensystems kam. N2 - In the present work, the sensor properties of luminescent metal-organic frameworks (MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4), and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) were investigated and quantitatively described. Therefore, bulk substances and MMMs (mixed-matrix membranes) were generated and tested against different analytes like water (relative humidity) and alcohols like, methanol, ethanol and isopropanol. For this purpose, a special experimental setup was constructed, which meets the requirements of a quantitative detection of the sensor properties and influential environmental parameters, such as the concentration of the analyte (e.g. in the form of relative humidity of the atmosphere), temperature, pressure, sample mass and sample surface. This standardized method allowed a precise determination of the occurring luminescence changes. In addition, a mathematical methodology was used to interpret the results of the experiments and place them in an overall context. For each of the five model systems, a series of measurements were carried out against a wide range of relative humidity at 25 °C. In all cases the occurring "turn-off"-effect could be described for each experiment with an exponential function and used to determine the concentration-dependent reaction constants and the half-lifes. The obtained information was used to determine the reaction constants and the thresholds of the sensor properties of the respective systems. In a further series of experiments, the influence of the alcohols methanol, ethanol, and isopropanol onto the luminescence of the MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4), and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) at various concentrations and temperatures, was quantitatively determined and described mathematically. The relevant properties, such as concentration-dependent reaction constants and half-lifes, were determined. In addition, changes in the luminescence pattern of the MOFs were observed, studied, and described for ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) and ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5). To enable a real application, the possibilities of processing ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) and ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) were investigated. For this purpose, the respective bulk substances were embedded in the three polymers polystyrene (PS), polyvinyl chloride (PVC), and polymethylpentene (TPX) via dropcoating. The MMMs were tested for their ability of sensing humidity. The "turn-off"-effect was quantitatively described and analyzed. The corresponding bulk substance was set in relation to point out the occurring changes in stability (concentration-dependent reaction constants and half-lifes). Within a cooperation with the working group Prof. Janiak of the Heinrich Heine University, the MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) and ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) were embedded into polysulfone (PSF) and also tested for their ability to sense humidity. In this work it was possible to quantify and mathematically describe the sensor properties of the MOFs and CPs used (1 - 5) for the first time. The developed sensing concept was successfully transferred to detect various alcohols in the gas phase (for systems 1, 4, and 5). Subsequently, it was possible to embed the model systems (1, 2, and 4) used in different polymers, while obtaining the luminescence property. Subsequnt, it was possible to record quantitatively and describe mathematically their properties for humidity sensing. In the last part of the work, the two porous ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) and Zn(nmIm)2 (7) were mixed with a terbium nitrate solution to implement the luminescence properties into the ZIFs by filling the cavities. The degree and the quality of the filling were then checked by a number of analytical methods and the luminescence properties were investigated. The filling of the pore system was detected successfully for Na-Rho-ZMOF (6). For Zn(nmIm)2 (7) no evidence of pore filling was found. KW - MOFs KW - Sensorik KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173190 ER - TY - THES A1 - Bach, Tobias T1 - Electromechanical interactions in lithium-ion batteries: Aging effects and analytical use T1 - Elektromechanische Wechselwirkungen in Lithium-Ionen Batterien: Alterungseffekte und analytische Anwendungsmöglichkeiten N2 - In the first part of his work, the causes for the sudden degradation of useable capacity of lithium-ion cells have been studied by means of complementary methods such as computed tomography, Post-Mortem studies and electrochemical analyses. The results obtained point unanimously to heterogeneous aging as a key-factor for the sudden degradation of cell capacity, which in turn is triggered by differences in local compression. At high states of health, the capacity fade rate is moderate but some areas of the graphite electrode degrade faster than others. Still, the localized changes are hardly noticeable on cell level due to averaging effects. Lithium plating occurs first in unevenly compressed areas, creating patterns visible to the human eye. As lithium plating leads to rapid consumption of active lithium, a sudden drop in capacity is observed on cell level. Lithium plating appears to spread out from the initial areas over the whole graphite electrode, quickly consuming the remaining useful lithium and active graphite. It can be hypothesized that a self-amplifying circle of reciprocal acceleration of local lithium loss and material loss causes rapid local degradation. Battery cell designers can improve cycle life by homogeneous pressure distribution in the cell and using negative active materials that are resilient to elevated discharge potentials such as improved carbons or lithium titanate. Also, a sufficiently oversized negative electrode and suitable electrolyte additives can help to avoid lithium plating. When packs are designed, care must be taken not to exert local pressure on parts of cells and to avoid both very high and low states of charge. In the second part of this dissertation the resilience of cylindrical and pouchbag cells to shocks and different vibrations was investigated. Stresses inflicted by vibration and shock tests according to the widely recognized UN38.3 transport test were compared to a long-time test that exposed cells to a 186 days long ordeal of sine sweep vibrations with a profile based on real-world applications. All cells passed visual and electric inspection performed by TU München after the vibration tests. Only cylindrical cells subjected to long-term vibrations in axial direction showed an increase in impedance and a loss of capacity that could be recuperated in part. The detailed analyses presented in this thesis gave more details on the damages inflicted by vibrations and shocks and revealed drastic damages in some cases. In cylindrical cells, only movement in axial direction caused damage. Long term vibrations were found to be especially detrimental. No damage whatsoever could be detected for pouch cells, regardless of the test protocol and the direction of movement. The extreme resilience of pouchbag cells shows that the electrode stack of lithium-ion cells is resistant to vibrations, and that damages are caused by design imperfections that can be improved at low cost. The findings of this work, and the general state of research show that it is most crucial to control the lithiation and thus potential of the graphite electrode. In the last part of this work, a new, direct method for charge estimation based on changing transmission is presented. A correlation between transmission of short ultrasonic pulses and state of charge is found. This new technology allows direct measurement of the state of charge. The method is demonstrated for batteries with different positive active materials, showing its versatility. As the observed changes can be traced to the lithiation of graphite, it can be determined without a reference electrode. Already at this early stage of development, the found correlations allow estimation of state of charge. The present hysteresis in the signal height of the slow wave, which is unneglectable especially during discharging at higher currents, will be subject to further investigation. The observed effects can be explained by effects on different length scales. Biot’s theory explains the second wave’s slowness based on the active material particles size in the range of 0.01 mm and electrolyte-filled pores. Lithiation of graphite changes the porosity of the electrode and thereby the velocity and wavelength of the impulse. When the wavelength approaches the length scale of the layers, 0.1 mm, scattering effects dampen the transmitted signal. Finally, the wavelength of the pulse should be shorter than the transducers diameter to obtain a homogeneous wave front. To conclude, the new method allows the control of each individual cell in a pack independent from the electrical connections of the cells. As the method shows great promise, further studies regarding factors such as long-term behavior, temperature and current rates should be conducted. In this thesis hysteresis was observed and a deeper understanding of the reasons behind it may allow further improvements of measurement precision. N2 - Im ersten Teil dieser Doktorarbeit wurden die Ursachen des plötzlichen Kapazitätseinbruchs von Lithium-Ionen Zellen untersucht. Die mittels sich ergänzender Methoden wie Röntgentomographie, Post-Mortem Untersuchungen und elektrochemischer Analysen gewonnenen Ergebnisse weisen darauf hin, dass heterogene Alterungseffekte eine Schlüsselrolle für den beschleunigten Kapazitätsverlust spielen. Die beobachteten Ungleichmäßigkeiten auf gealterten Elektroden konnten wiederum auf Kompressionsunterschiede zurückgeführt werden. Im frühen Alterungsstadium war zwar nur ein moderater Kapazitätsverlust zu verzeichnen, einige Bereiche der Graphitelektrode altern jedoch schneller als andere. Diese lokalen Alterungseffekte sind auf Zellebene aufgrund von Mittelungseffekten zunächst schwer nachweisbar, sobald jedoch in Bereichen abweichender Kompression Lithiumplating auftritt, entstehen Muster welche nach Öffnen der Zelle gut zu erkennen sind. Inaktives Lithium, dicke Passivschichten sowie erhöhte Mengen an abgelagertem Mangan und anderen Metallen die aus dem positiven Aktivmaterial herausgewaschen wurden, konnten in geschädigten Bereichen der Zellen B und C, welche direkt beim Einsetzen beziehungsweise 150 Zyklen später geöffnet wurden, nachgewiesen werden. Da Lithiumplating zu raschem Verbrauch von aktivem Lithium führt, kann ein plötzlicher Einbruch der Zellkapazität beobachtet werden. Das Lithiumplating scheint sich von den geschädigten Bereichen über die gesamte Elektrode auszubreiten, wobei rasch das verbleibende aktive Lithium und teilweise auch das negative Aktivmaterial verbraucht wird. Daher wird die Hypothese aufgestellt, dass durch lokales Lithiumplating ein sich selbst verstärkender Kreislauf in Gang gesetzt wird, wobei sich lokaler Lithium- und Aktivmaterialverlust gegenseitig beschleunigen. Im zweiten Teil der Arbeit wurde die Widerstandsfähigkeit von zylindrischen und Pouchbagzellen gegenüber Schocks und Vibrationen untersucht. Belastungen durch Vibrationen und Schocks gemäß des weitläufig anerkannten Transporttests UN38.3 wurden mit 186 Tage dauernden Langzeittests verglichen. Alle Zellen bestanden die visuellen und elektrischen Überprüfungen die an der TU München nach Durchführung der Vibrationstests durchgeführt wurden. Nur die zylindrischen Zellen zeigten einen Anstieg des Innenwiderstands sowie einen weitgehend reversiblen Kapazitätsverlust. Die in dieser Arbeit vorgestellte tiefergehenden Analysen gaben ein detaillierteres Bild der beobachteten Effekte auf und zeigten teilweise schwere versteckte Schäden auf, wobei ausschließlich in axialer Richtung belastete Rundzellen Schäden aufwiesen. Langzeitvibrationen führten zu besonders schweren Schadensbildern. An den untersuchten Pouchzellen konnte keinerlei Schädigung durch die Vibration festgestellt werden. Die Widerstandsfähigkeit der Pouchzellen zeigt, dass der Elektrodenstapel, der die Grundlage jeder Lithium-Ionen Zelle bildet, äußerst vibrationsstabil ist und auftretende Schäden auf ungenügendes Zelldesign zurückzuführen sind. Die hier vorgestellten Ergebnisse und der Stand der Wissenschaft zeigen die Bedeutung des Lithiierungsgrad der Graphitelektrode für die Alterung auf. Im letzten Teil der Arbeit wurde daher eine neue Methode zur Ladezustandsbestimmung mittels Ultraschall vorgestellt. Die beobachteten Amplituden- und Laufzeitänderungen erlauben die direkte Bestimmung des Ladezustands von Lithium-Ionen Zellen und die Anwendbarkeit konnte an Zellen mit verschiedenen positiven Aktivmaterialien gezeigt werden. Die beobachteten Effekte können auf Vorgänge auf verschiedenen Längenskalen zurückgeführt werden. Biots Theorie bietet eine Erklärung der geringen Geschwindigkeit der zweiten Welle aufgrund der Ausbreitungsmodi der Schallwellen im porösen, elektrolytgefüllten Aktivmaterial. Die im Vergleich zur Wellenlänge kleine Längenskala der Aktivpartikel und der elektrolytgefüllten Poren von 0,01 mm führt hierbei dazu, dass sich das Material als Effektivmedium verhält. Durch die Lithiierung der Graphitpartikel ändern sich Eigenschaften und Porosität der Elektrode. Insbesondere die Porositätsänderung kann laut Biots Theorie die Geschwindigkeit und somit die Wellenlänge der zweiten Welle wesentlich verändern. Wenn die Wellenlänge auf die Größenordnung der Schichtdicken der Zelle, 0,1 mm, reduziert wird, treten Streuungseffekte auf, die die transmittierte Welle abschwächen. Schlussendlich muss der Durchmesser der eingesetzten Schallwandler größer als die Wellenlänge der Pulse sein um ein homogenes Schallfeld zu erzeugen. Da der Einsatz von Ultraschallpulsen vielversprechend erscheint, sollten in weiteren Studien Faktoren wie Langzeitverhalten, Temperatur- und Rateneinflüsse untersucht werden. In dieser Arbeit wurde weiterhin Hysterese beobachtet deren tieferes Verständnis nicht nur die Ladezustandsbestimmung, sondern auch das Verständnis der dynamischen Prozesse in Lithium-Ionen Zellen verbessern könnte. KW - Lithium-Ionen-Akkumulator KW - Lithium-Plating KW - Alterung KW - Ultraschall KW - Ultraschallsensor KW - vibration testing KW - mechanical shock KW - heterogeneous compression Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153325 ER - TY - THES A1 - Zottnick, Sven Holger T1 - Lumineszierende Lanthanid-Koordinationsverbindungen auf Basis von Cyano- und Spiroborat Salzen und ionischen Flüssigkeiten T1 - Luminescent lanthanide coordination compounds based on cyano- and spiroborate salts and ionic liquids N2 - Im Rahmen dieser Arbeit konnten, ausgehend von Borat-haltigen Salzen und ionischen Flüssigkeiten (ILs) sowie Lanthanid-haltigen Precursoren, 30 neue Komplexe und Koordinationspolymere dargestellt werden. Dazu wurden vielfältige Synthesestrategien verfolgt und angewendet, unter anderem Salzmetathesen in Lösung, Solvothermalsynthesen und Ionothermalsynthesen. Ein Hauptaugenmerk bei der Synthese der Zielverbindungen lag auf deren Eigenschaften, wobei insbesondere die Photolumineszenzeigenschaften der erhaltenen Koordinationsverbindungen untersucht wurden. Als Borat-haltige Liganden wurden sowohl Cyanoborate als auch Oxoborate hinsichtlich ihrer Eignung zum Aufbau neuer Koordinationspolymere untersucht. Als Cyanoborat-haltige Edukte wurden dabei Säuren und ionische Flüssigkeiten mit Dicyano-, Tricyano- und Tetracyanoborat- Anionen eingesetzt, die durch die unterschiedliche Zahl an Cyanogruppen zu vielfältigen Koordinationsverbindungen führen können. Mittels Ionothermalsynthese konnten die Verbindungen 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) sowie [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] dargestellt werden, wobei es zu einer Transformation der ionischen Flüssigkeit [EMIm][B(CN)4] in ein Koordinationspolymer kommt, in dem sowohl Kation als auch Anion der IL beteiligt sind. Dabei ist es bemerkenswerterweise durch die Reaktionstemperatur möglich zu steuern, welches Produkt sich letztlich bildet. Ebenfalls durch Ionothermalsynthese gelang die Synthese von Einkristallen der Verbindung 3∞[La{C2F5B(CN)3}3], durch deren Kenntnis die Verbindungen 3∞[Ln{C2F5B(CN)3}3](Ln = Eu, Ho) als isotype Strukturen identifiziert und hinsichtlich ihrer Lumineszenzeigenschaften charakterisiert werden konnten. Durch Umsetzungen der Lanthanidchloride mit der Säure H[BH2(CN)2] in Solvothermalsynthesen in Pyridin (py) konnten eindimensionale Koordinationspolymere [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) erhalten werden. Unter vergleichbaren Synthesebedingungen aber im Lösungsmittel MeCN beobachtet man hingegen die Bildung von Raumnetzen der Zusammensetzung 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb). Die dreidimensionalen Koordinationspolymere 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) wurden ebenfalls in MeCN synthetisiert, allerdings ausgehend von der Säure [H3O][BH(CN)3]. Die erwähnten Verbindungen zeigen für die spektroskopisch relevanten Vertreter charakteristische Lumineszenz auf Basis von 5d-4f- respektive 4f-4f-Übergängen, die überwiegend auf der direkten Anregung der jeweiligen Lanthanidionen beruht. Mit dem Bis-salicylatoborat-Anion (= BSB−) gelang ausgehend von Na[BSB] und LnCl3 unter solvothermalen Bedingungen in Pyridin die Synthese der eindimensionalen, strangartigen Koordinationspolymere 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) und der zweidimensionalen, schichtartigen Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er). Einblicke über den Mechanismus der Bildung der genannten Verbindungen konnten durch den Komplex [ErCl2(py)4BSB] gewonnen werden, der eine sukzessive Substitution der Chlorid-Liganden nachweist. Die Verbindungen mit dem [BSB]−-Anion zeigen Photolumineszenz, die auf unterschiedliche Prozesse zurückgeführt werden kann. So weist 1∞[Y(BSB)3(py)2] Fluoreszenz auf, die von den [BSB]−-Anionen herrührt, während 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) sowie 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) Lumineszenz auf Basis von 5d-4f- und 4f-4f-Übergängen zeigen, die durch einen Antenneneffekt der koordinierenden [BSB]−-Anionen vergleichsweise intensiv beobachtet werden können. Eine Sonderstellung nehmen hier die Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) ein. Während mit Eu3+ überwiegend direkte Anregung festgestellt werden kann, treten für Ho3+ Reabsorptionsprozesse auf. Durch Kombination unterschiedlicher Gehalte an Eu3+- bzw. Tb3+-Ionen in den eindimensionalen Koordinationspolymeren 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25) können zudem Mischfarben der Lumineszenz erzeugt werden. Mit dem Komplex [B2O(C2O4)2(dmf)2] (dmf = Dimethylformamid) und dem Koordinationspolymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = Phthalatoborat) konnte zudem die Sonderstellung des [BSB]−-Anions deutlich gemacht werden, da es als einziges untersuchtes Spiroborat-Anion vollständig in Zielverbindungen eingebaut werden konnte, während vergleichbare Spiroborat-Anionen wie das [PHB]−-Anion in Gegenwart Lewis-acider Verbindungen hingegen die Abspaltung funktioneller Gruppen zeigten. Insgesamt konnten in dieser Arbeit somit zahlreiche neue, lumineszierende Koordinationspolymere mit Cyano- und Oxoboraten erfolgreich dargestellt werden. N2 - Within the scope of this thesis 30 new complexes and coordination polymers could be synthesized, starting from borate-containing salts and ionic liquids (ILs) as well as lanthanide compounds. Therefore, manifold synthesis strategies were applied, including salt metatheses, solvothermal syntheses and ionothermal syntheses. The main focus within the synthesis of desired products was set on the properties of the compounds, particularly on their photoluminescence behavior. Both cyanoborates and oxoborates were investigated regarding their potential in constructing new coordination polymers. Acids and ionic liquids with dicyano-, tricyano- and tetracyanoborate anions were used, leading to diverse coordination compounds due to their varying number of cyano groups. By applying ionothermal methods, the compounds 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) and [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] could be synthesized from the ionic liquid [EMIm][B(CN)4], showing a transformation of the ionic liquid into a coordination polymer incorporating both cation and anion of the IL. Remarkably, it is possible to control, which of the products is formed by changing the reaction temperature. Single crystals of the compound 3∞[La{C2F5B(CN)3}3] could also be synthesized by ionothermal methods. With the knowledge on the crystal structure, it was possible to identify the compounds 3∞[Ln{C2F5B(CN)3}3] (Ln = Eu, Ho) as isotypic structures, thereby allowing further investigations on their properties, including their luminescence features. By reacting lanthanide chlorides with the acid H[BH2(CN)2] in pyridine (py), one-dimensional coordination polymers [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) could be obtained. Under similar solvothermal conditions, but in MeCN as solvent, the formation of networks of the constitution 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb) is observed instead. The three-dimensional coordination polymers 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) were also synthesized in MeCN, however starting from the acid [H3O][BH(CN)3]. The compounds described show characteristic luminescence for spectroscopically relevant ions, based on 5d- 4f- and 4f-4f-transitions, respectively. Thereby, the observed luminescence is mainly based on a direct excitation of the respective lanthanide ions. With the bis-salicylatoborate-anion (= BSB−), it was possible to synthesize one-dimensional, strand-like coordination polymers 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) as well as twodimensional, sheet-like structures 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er), starting from Na[BSB] and LnCl3 under solvothermal conditions in pyridine. The molecular complex [ErCl2(py)4BSB] allowed further insights into the formation of the described compounds, as it proves a gradual substitution of chloride ligands by [BSB]−-anions. The compounds with the [BSB]−-anion show photoluminescence features ascribed to different processes. 1∞[Y(BSB)3(py)2] shows fluorescence originating from the [BSB]−-anion, while 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) and 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) show luminescence based on 5d-4f- and 4f-4f-transitions. These are quite intense, as an antenna effect of coordinating [BSB]−-anions can be observed. The compounds 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) prove as exceptions, as direct excitation is mainly observed for Eu3+, while Ho3+ shows reabsorption processes. By mixing different contents of Eu3+ and Tb3+ in the one-dimensional coordination polymers 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25), it is possible to create mixed luminescence colors. With the complex [B2O(C2O4)2(dmf)2] (dmf = dimethylformamide) and the coordination polymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = phthalatoborate) the exceptional position of the [BSB]−-anions within the class of spiroborates could be revealed, as it proved as only spiroborate anion within this work, that could be fully incorporated in the desired products. This is benficial to a great extent, as similar spiroborate anions like the [PHB]−-anion tend to loose functional groups in the presence of Lewis-acid compounds. Altogether, it was possible to successfully synthesize numerous luminescent coordination polymers with cyano- and oxoborates in this work. KW - Photolumineszenz KW - Lanthanoide KW - Borate KW - Spiroborate KW - Cyanoborate KW - Koordinationsverbindungen KW - Koordinationspolymere KW - MOFs Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157945 ER - TY - THES A1 - Stauch, Claudia T1 - Synthese und Charakterisierung nanostrukturierter Mikropartikel mit einstellbarem Zerfallsverhalten als Additive für Elastomerkomposite T1 - Synthesis and characterization of nanostructured micro-particles with adjustable decomposition behavior as additives for elastomer composites N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung von nanostrukturierten Mikropartikelpulvern mit einstellbarem Zerfalls- und Dispergierungsverhalten und deren Anwendung als verstärkender Füllstoff sowie deren Eignung für Sensoranwendungen. Sie ist in drei Teilbereiche gegliedert: Der erste Teil beschreibt die Synthese der nanostrukturierten Mikropartikelpulvern durch Sprühtrocknung von kolloidalen oxidischen (silicatischen und eisenoxidischen) Nanopartikeln. Es wird ausgeführt, wie durch Variation der Art und Größe der Primärpartikel und deren mengenanteiligen Kombination Mikropartikel unterschiedlichster nanostruktureller Maserung und Ausprägung erhalten wurden. Das Spektrum dieser Partikel reichte von homogen verteilten Strukturen bis hin zu Kern-Satellit-Struktur, von kontrollierter Aggregierung bis hin zur vollständigen Dispergierbarkeit. Im zweiten Teil der Arbeit wurden die Partikel im Hinblick auf ihre Eignung und Verwendung als Füllstoffe für Elastomer-Matrices untersucht. Im Fokus stand die Verstärkungswirkung und die Korrelation mit dem Dispergierverhalten in PDMS. Im dritten Teil der Arbeit wurde das Syntheseprinzip der Herstellung nanostrukturierter Mikropartikel auf Hydroxid-basierte Systeme wie LDHs erweitert. Teil I: Von Silica-NP zu nanostrukturierten Mikropartikeln mit einstellbarem Zerfallsverhalten Um nanostrukturierte Mikropartikel mit einem integrierten Zerfallsverhalten zu erzeugen, wurden zunächst kolloidale Silica-NP mit einer Größe von 20 nm abgestuft mit unterschiedlichen Mengen (0, 1/10, 1/5, 1/3, 1/2, 2/3, 1) eines hydrophobierend wirkenden Silans (Triethoxyoctylsilan, OCTEO) modifiziert. Neben den beiden Extremen der vollständigen und unmodifizierten Varianten (1 und 0) wurden teilweise modifizierte Zwischenstufen erhalten, indem die Silanmenge auf 2/3, 1/2, 1/3, 1/5 und 1/10 im Vergleich zu den vollmodifizierten Silica-NP verringert wurde. Die modifizierten Nanopartikel zeigten beim Dispergieren in verschiedenen Flüssigkeiten (Wasser, Toluol) eindeutige und graduell klar differenzierbare Unterschiede in Abhängigkeit vom Bedeckungsgrad der Partikeloberfläche mit dem Silan. Wie erwartet nahm das hydrophobe Verhalten der Nanopartikel mit zunehmendem Bedeckungs- und damit Modifizierungsgrad zu und die Nanopartikel waren in unpolaren Flüssigkeiten wie Toluol gut dispergierbar, während sie in polaren Flüssigkeiten wie Wasser zur Agglomeration und Sedimentation neigten. In einem nächsten Schritt wurden die zu unterschiedlichen Graden mit OCTEO modifizierten kolloidalen Silica-NP mittels Sprühtrocknung in mikroskalige Pulver überführt. Die nanostrukturierten Mikropartikelpulver wurden mit verschiedenen Analysemethoden wie REM-Aufnahmen, BET-, FTIR- und TG-Messungen untersucht, und die Eigenschaften der gebildeten Partikel charakterisiert. Die nanostrukturierten Mikropartikel zeigten auf den REM-Aufnahmen abhängig vom Modifizierungsgrad der Nanopartikel ein sehr unterschiedliches Aussehen. Während die Mikropartikel aus vollständig modifizierten Nanopartikeln eine eher raue Oberfläche besaßen, hatten die aus unmodifizierten Nanopartiklen gebildeten eine sehr glatte, kompakt erscheinende Oberfläche, was als Hinweis auf eine Kondensation und eine damit verbundene Aggregation der Nanopartikel gewertet wurde. Da sich diese Hypothese anhand der Aufnahmen aber nicht beweisen ließ, wurden in einer nächsten weiterführenden Testreihe Nano-Indenter-Experimente unter dem REM mit den aus voll- und unmodifizierten Nanopartikeln aufgebauten Mikropartikeln durchgeführt. Die Ergebnisse bestätigten den ersten Eindruck der REM-Aufnahmen insofern, als das sich die sehr kompakt wirkenden unmodifizierten Partikel nicht mit einer Wolfram-Spitze eindrücken ließen und damit die Hypothese mechanisch stabiler Aggregate untermauerten. Ganz anders verhielten sich die vollmodifizierten Partikel, die mithilfe der Wolfram-Spitze so eingedrückt werden konnten, dass die Nanopartikel aus dem Mikropartikelverbund herausgelöst wurden und teilweise vereinzelt vorlagen. Hier handelte es sich mit hoher Wahrscheinlichkeit um Agglomerate, die unter der Einwirkung einer Scherkraft wieder vereinzelt werden konnten. Da es mit mikroskopischen Verfahren wie REM nicht möglich war, unmittelbare Aussagen bezüglich der Wechselwirkung der Nanopartikel im Mikropartikel zu treffen, wurden zunächst die Oberflächeneigenschaften mittels BET-, FTIR- und TG-Messungen untersucht. Im Hinblick auf die spätere Anwendung war es sehr wichtig, die Oberflächeneigenschaften der Mikropartikel möglichst umfassend zu charakterisieren, da diese entscheidend zur Dispergierbarkeit der Partikel in einem Matrixsystem beitragen. Mithilfe der FTIR- und TG-Messungen konnte die Anwesenheit und Menge von Silan auf der Partikeloberfläche bestimmt werden. Es zeigte sich ein klarer Trend für die zu verschiedenen Graden mit OCTEO modifizierten Silica-NP. Mit zunehmender Silanmenge nahm sowohl die Intensität der FTIR-Bande für die CH2- und CH3-Streckschwingung als auch der Masseverlust zu. Im Gegensatz zu diesen Messungen zeigte sich bei den BET-Messungen kein klarer Trend in Abhängigkeit vom Bedeckungsgrad der Silica-NP. Die höchsten Werte für die spezifische Oberfläche hatten Mikropartikel, die aus 1/5- und 1/3-modifizierten Silica-NP bestanden. Eine schlüssige Erklärung wird darin gesehen, dass durch die Alkylgruppen auf der Oberfläche ein Kondensieren der Silica-NP weitestgehend verhindert wurde und gleichzeitig noch genügend Mikroporen vorhanden blieben, die mit den Stickstoffmolekülen wechselwirken konnten. Neben den Standard-Analysemethoden wurden Dispergierbarkeitsuntersuchungen durchgeführt sowie die Hansen-Dispergierbarkeitsparameter (HDP) und die ET (30)-Werte mit dem Reichardt-Farbstoff bestimmt. Anhand der Dispergierbarkeitsuntersuchungen konnten erste qualitative Aussagen getroffen werden, ob es sich um hydrophile oder hydrophobe Partikel handelt. Diese ersten Ergebnisse und Trends konnten anschließend mit den HDP und dem RD quantitativ untermauert werden. Die Polarität der Mikropartikel, die aus zu unterschiedlichen Graden mit OCTEO modifizierten Silica-NP aufgebaut waren, nahm mit zunehmender Oberflächenbedeckung ab. Dieser Trend korrelierte mit den aus den FTIR- und TG-Messungen erhaltenen Werten. Da es mit den Silica-basierten Mikropartikeln nicht möglich war, unmittelbare Aussagen zum Agglomerations- bzw. Aggregationsgrad der Nanopartikel im Mikropartikel zu treffen, wurde das Prinzip der Agglomerations/Aggregationssteuerung über Oberflächenmodifikation auf magnetische Nanopartikel übertragen und so ein Modell geschaffen, das die Wechselwirkung auf nanopartikulärer Ebene sichtbar und messbar macht. Diese Informationen zum Agglomerationsgrad der Nanopartikel lieferten wertvolle Hinweise im Hinblick auf die Dispergierbarkeit der Partikel in einer Matrix: Handelte es sich bei den Partikeln um lose Agglomerate, könnten diese zum Beispiel in einem Elastomer wieder auf Primärpartikelgröße dispergiert werden, während Aggregate nur in undefinierte Sekundärstrukturen zerfallen. Gleichzeitig wurde mit dieser Systemübertragung die Frage beantwortet, ob es sich bei den teilmodifizierten Partikeln um eine Mischung aus voll- und unmodifizierten Partikeln handelte oder ob das Silan statistisch über die komplette Oberfläche verteilt war. Wie auch schon beim Silica-System wurden die Nanopartikel zunächst abgestuft mit OCTEO modifiziert (0, 1/10, 1/3, 1/2, 2/3, 1) und anschließend sprühgetrocknet. Aufgrund ihrer magnetischen Eigenschaften konnten die Eisenoxid-Partikel mittels ZFC- und FC-Messungen untersucht werden. Diese spezielle Analysemethode erlaubte es, Aussagen über den Grad der magnetischen Wechselwirkung der Partikel zu treffen und somit indirekt auch über den Grad der Agglomeration/ Aggregation der Nanopartikel im Mikropartikel. Es zeigten sich klare Unterschiede in den Werten für die Blocking-Temperatur (TB) zwischen den voll- und unmodifizierten Partikeln. TB ist die Temperatur, ab welcher die Magnetisierungsrichtung der Partikel aufgrund der thermischen Energie frei fluktuieren kann. Die vollmodifizierten Partikeln hatten einen sehr niedrigen Wert für TB, was auf eine schwache Dipol-Dipol- Wechselwirkung zwischen den einzelnen Eisenoxid-NP schließen ließ, während die unmodifizierten Eisenoxid-Partikel einen hohen TB-Wert hatten, woraus zu schließen war, dass es sich um Aggregate mit einem sehr geringen Partikel-Partikel-Abstand handelte und einer deshalb höheren Wechselwirkung. Die Werte der teilmodifizierten Partikel folgten dem Trend, dass mit zunehmender Silan-Bedeckung der TB-Wert abnahm. Um die Frage der Silan-Verteilung zu beantworten, wurde zusätzlich ein Mischsystem aus voll- und unmodifizierten Eisenoxid-NP versprüht. Sollte es sich bei den teilmodifizierten Partikeln (als Beispiel 1/2) nicht um eine statistische Verteilung der Octylgruppen auf der Oberfläche handeln, müssten die beiden Messungen Übereinstimmungen aufweisen. Dies war allerdings nicht der Fall, was mithilfe der ZFC- und FC-Messungen gezeigt werden konnte. Der TB-Wert des Mischsystems lag zwischen dem der voll- und zu 2/3-modifizierten Partikel, während der Tir-Wert dem der unmodifizierten Partikel entsprach. Die Breite der Aufspaltung zwischen TB undTir konnte als breite Partikelverteilung (Mischung aus Agglomeraten und Aggregaten) interpretiert werden. Im Hinblick auf die Anwendung als Füllstoff wurden die Mikropartikel in eine PDMS-Matrix eingearbeitet und erneut ZFC- und FC-Messungen durchgeführt, wobei die gleichen Trends wie bei den reinen nanostrukturierten Mikropartikeln erhalten wurden. Das bedeutete, dass sich die vollmodifizierten Eisenoxid-NP gut im Elastomer verteilt hatten und somit eine nur sehr geringe Dipol-Dipol-Wechselwirkung vorhanden war. Mit dem entwickelten System der nanostrukturierten Mikropartikel lässt sich der Agglomerations- bzw. Aggregationsgrad der Nanopartikel mehr oder weniger gezielt einstellen, und es können zusätzlich Voraussagen über die Redispergierbarkeit des Partikelpulvers in einer geeigneten Matrix gemacht werden. Basierend auf den gewonnen Erkenntnissen, die zum Verständnis der nanostrukturierten Mikropartikel beitrugen, wurden in einem nächsten Schritt gezielt komplexe Strukturen aufgebaut. Für eine gezielte Strukturierung von Nanopartikeln in Kern-Satellit-Partikel wurde zunächst große 100 nm Silica-NP mit einem PCE funktionalisiert und anschließend mit kleinen und großen unmodifizierten Silica-NP versprüht. Wurden die geeigneten Verhältnisse (70:20:10; 100 nm Mel : 100 nm blank : 20 nm blank) der Partikel zueinander gewählt, konnten Kern-Satellit-Strukturen auf der Mikropartikeloberfläche erzeugt werden. Beim Dispergieren der Mikropartikel in einer Flüssigkeit und in einem Elastomer (PDMS) konnten vereinzelte Kern-Satellit-Strukturen erhalten werden. Um zu bestätigen, dass es sich bei den dispergierten Kern-Satellit-Partikeln nicht um durch Trocknungseffekte entstandene Strukturen handelte, wurden in-situ-Flüssigkeitszellen- TEM-Aufnahmen gemacht. Die Aufnahmen konnten zeigen, dass sich die Kern-Satellit- Partikel in Abhängigkeit zueinander bewegen und nicht jeder Nanopartikel für sich, was auf eine Bindung der Partikel untereinander hindeutete. Neben den Silica-basierten Kern-Satellit-Partikeln konnten auch welche erzeugt werden, deren Satellit-Partikel aus Eisenoxid bestanden. Mit diesem System ist es möglich, multifunktionelle Partikel mit verschiedensten Eigenschaften und Strukturen herzustellen. Teil II: Anwendungspotential nanostrukturierter Mikropartikel Im zweiten Teil der Arbeit wurde zunächst die Anwendung der nanostrukturierten Mikropartikel als Füllstoff in IR und PDMS untersucht. Dafür wurde ein weiteres Silan, Si69TM, zur abgestuften Modifizierung der Silica-NP eingesetzt. Es handelt sich um ein multifunktionelles Silan, welches sowohl an die Partikeloberfläche als auch an das Elastomer binden kann. Bei den mechanischen Untersuchungen der IR-Silica-Komposite zeigte sich, dass das Silan einen entscheidenden Einfluss auf die Verstärkung bei kleinen Deformationen hatte. Während bei dem monofunktionellen Silan (OCTEO) eine direkte Korrelation zwischen Bedeckungsgrad und mechanischer Verstärkung (G‘) bei gleichbleibendem Füllstoffgehalt beobachtet werden konnte, hatte der Bedeckungsgrad beim multifunktionellen Silan (Si69TM) keinen Einfluss. Anders als bei kleinen Deformationen zeigte sich bei großen Deformationen ein gegenteiliges Bild. Die Verschleißrate der IR-Silica-Komposite nahm bei beiden Silantypen mit zunehmendem Modifizierungsgrad ab, wobei die mit Si69TM modifizierten Partikel-Komposite wesentlich beständiger gegen Verschleiß waren als die mit OCTEO modifizierten Partikel-Komposite, was auf die zusätzliche Matrixanbindung des Si69TM zurückzuführen war. Wurden die IR-Silica- Komposite mit den PDMS-Silica-Kompositen verglichen, konnten keine übereinstimmenden Trends gefunden werden. Im PDMS-System war die mechanische Verstärkung für Mikropartikel aus 2/3 mit OCTEO modifizierten Silica-NP maximal. Diese Unterschiede könnten sowohl auf die unterschiedliche Einarbeitung als auch auf die sehr unterschiedlichen Matrices zurückgeführt werden. Als weitere Anwendung wurden die nanostrukturierten Mikropartikel als Schersensoren für den 3D-Druck untersucht. Hierfür wurden die Silica-NP mit einem PCE modifiziert und anschließend sprühgetrocknet. Um die entstandenen Mikropartikel vollständig in einer Matrix zu dispergieren, waren hohe Scherkräfte und lange Scherzeiten erforderlich, was eine mögliche Anwendung als Schersensor nur schwer realisierbar macht. Teil III: Erweiterung des Ansatzes zur Herstellung nanostrukturierter Mikropartikel auf Hydroxid-basierte Systeme Im dritten Teil dieser Arbeit wurde das System zur Modifizierung von oxidischen Silicaund Eisenoxid-Partikeln auf ein hydroxidisches Systeme übertragen. Hierfür wurden mittels Fällungsprozess LDH-Partikel hergestellt, die anschließend mit OCTEO modifiziert und abschließend sprühgetrocknet wurden. In gleicher Weise wie bei den Mikropartikeln aus Silica-NP nahm der hydrophobe Charakter der LDH-Mikropartikel mit zunehmendem Modifizierungsgrad der Ausgangspartikel zu, was sich anhand von Untersuchungen zur Dispergierbarkeit in Flüssigkeiten unterschiedlicher Polarität zeigte. Zudem ließen sich die aus vollmodifizierten LDHs aufgebauten Mikropartikel in einer PDMS-Matrix wieder in vereinzelte Partikel dispergieren. Die Verstärkung der Komposite war für die teilmodifizierten Partikel (2/3) maximal, da es sich hier, wie auch bei den anderen Partikelsystemen (Silica und Eisenoxid), um eine Mischung aus vereinzelten LDHs und kleineren Aggregate handelte, was aufgrund der starken Füllstoff-Füllstoff-Wechselwirkung zu einer mechanischen Verstärkung bei kleinen Deformationen/Dehnungen führte. Die Eigenschaften der Polymer-Partikel-Komposite ließen sich über den Modifizierungsgrad der Primärpartikel einstellen. Dies konnte für alle drei Partikelsysteme (Silica, Eisenoxid und LDH) beobachtet werden. Ausblick In der vorliegenden Arbeit konnte die Synthese von verschiedenen nanostrukturierten Mikropartikeln und deren einstellbaren Zerfall gezeigt werden. Um den Zerfall der Mikropartikel noch gezielter einstellen zu können, sollte in weiterführenden Arbeiten vor allem die Modifizierung der Nanopartikel noch eingehender untersucht werden. Mithilfe der magnetischen Messungen konnte zwar zwischen einer Mischung aus un- und vollmodifizierten Partikel im Vergleich zu teilmodifizierten Partikel unterschieden werden, es konnten jedoch keine konkreten Aussagen zur Verteilung der Silanmoleküle auf der Partikeloberfläche getroffen werden. Hierfür sollten weitere Charakterisierungsmethoden hinzugezogen werden, die die Modifizierung auf molekularer Ebene analysieren. Zusätzlich sollte die Verteilung/Anordnung der teilmodifizierten Nanopartikel im Mikropartikel untersucht werden. Gerade für Nanopartikel mit einem geringen Modifizierungsgrad (1/10, 1/5 und 1/3) sind verschiedene Anordnungen möglich. Die Nanopartikel können sich während der Sprühtrocknung so anordnen, dass sich die Alkylketten entweder nach außen oder in die Mitte des Mikropartikels orientieren/ausrichten. Die Anordnung der Nanopartikel hat einen großen Einfluss auf die Polarität der entstehenden Mikropartikel- pulver. Darüber hinaus hat sie einen Einfluss auf die Aggregation der Nanopartikel untereinander und somit auf die Bildung von komplexen Unterstrukturen wie zum Beispiel Kern-Satellit-Partikel. Neben der Modifizierung der Nanopartikel sollte die Herstellung der komplexen Strukturen/Suprapartikel weiter optimiert werden. Mit einem detaillierten Verständnis der physikalischen Prozesse während der Sprühtrocknung könnte die Anzahl der Satelliten auf den Kernpartikel kontrollierter eingestellt werden. Grundsätzlich kann das hier entwickelte System der nanostrukturierten Mikropartikel mit einstellbarem Zerfallsverhalten an eine Vielzahl von Anwendungen angepasst werden. Da das System für zahlreiche Partikeltypen (Silica-, Eisenoxid-NP und LDH) geeignet ist, könnten verschiedene Partikel ko-versprüht und so Suprapartikel mit ganz neuen Funktionalitäten und Eigenschaften erzeugt werden. Diese können als verstärkende Füllstoffe in Elastomere oder zur Stabilisierung von Dispersionen eingesetzt werden. Mischpartikel aus Silica- und Eisenoxid-Partikel hätten zum Beispiel den Vorteil, dass sie eine Dispersion stabilisieren und gleichzeitig wieder magnetisch abgetrennt werden können. Diese Mischpartikel könnten auch als Füllstoffe in komplexe Kunststoffbauteile eingearbeitet werden, in denen sie zum einen als mechanisch verstärkender Füllstoff wirken und gleichzeitig durch induktive Erwärmung das Bauteil vernetzt. Beim induktiven Erwärmen handelt es sich um eine schonende Methode Bauteile gezielt zu vernetzen, indem die Wärme im Bauteil selbst, über magnetische Verluste der Magnetpartikel in einem magnetischen Wechselfeld, erzeugt wird und nicht über seine Oberfläche eingebracht werden muss. Eine weitere interessante Anwendung für Mischpartikel ist die als magnetooptisch aktiver Marker oder Tracer in der medizinischen Diagnostik. Aufgrund von Quenching-Effekten (Auslöschungseffekte) ist es schwierig magnetische Nanopartikel mit einer Farbigkeit oder Fluoreszenz auszustatten.[385] Mischt man jedoch die magnetischen Nanopartikel mit einem weiteren Partikelsystem wie zum Beispiel Silica-NP oder LDHs, können magnetooptische Eigenschaften erhalten werden N2 - The herein presented work deals with the synthesis and characterization of nanostructured microparticle powders with adjustable burst behavior and their application as reinforcing fillers as well as their application as a shear sensors. For this purpose, the work was structured into three parts. The first part was dedicated to the synthesis of nanostructured microparticle powders produced by spray-drying colloidal nanoparticles. Depending on the composition of the particles during the spray-drying process, it was possible to produce nanoparticulate structures such as core-satellites. In the second part of the work, these nanostructured microparticles could be redispersed in a suitable matrix such as polydimethylsiloxane (PDMS) and then tested for a potential application as reinforcing fillers. In the third and final part of the work, the synthesis approach was extended to hydroxide-based systems such as layered double hydroxides particles (LDHs). Part I: From silica nanoparticles to nanostructured microparticles with adjustable burst behavior To generate nanostructured microparticles with an integrated burst behavior, colloidal silica nanoparticles with a size of 20 nm were either partially or completely (1/10, 1/5, 1/3, 1/2, 2/3, 1) modified with triethoxyoctylsilane (OCTEO), which makes the nanoparticle surfaces hydrophobic or semi-hydrophobic, or the nanoparticles were left blank (0). To achieve the part-modification„ the amount of silane was reduced accordingly to 2/3, 1/2, 1/3, 1/5 and 1/10 compared to the completely modified silica nanoparticles. The modified nanoparticles showed clear differences when dispersed in different liquids (water, toluene) depending on the silanization degree of the particle surface. As expected, the hydrophobic behavior of the nanoparticles increased with increasing silane coverage and the nanoparticles were redispersible in non-polar liquids such as toluene while they tended to agglomerate and sediment in polar liquids such as water. In a next step, the colloidal silica nanoparticles, which were modified to different degrees with OCTEO, were spray-dried to yield a powder. The obtained nanostructured microparticle powders were then characterized by various analysis methods such as scanning electron microscope (SEM), specific surface area measurement by nitrogen adsorption according the Brunauer, Emmett and Teller theory (BET), FTIR measurements and thermogravimetric analysis (TGA) to examine the properties of the formed particles in more detail. SEM revealed that the nanostructured microparticles showed a very different appearance depending on the degree of modification of the nanoparticles. The microparticles consisting of completely modified nanoparticles had a rather rough surface, while the ones consisting of non-modified nanoparticles had a very smooth and compact surface, which could be due to possible condensation and associated hard agglomeration of the nanoparticles. Since based on SEM images alone it was not possible to confirm this assumption, in a next series of tests, in situ nano-indenter experiments were carried out in the SEM with microparticles composed of completely and non-modified nanoparticles. These results finally confirmed the first impression gained by SEM, as the very compact non-modified particles could not be indented with a tungsten tip which is possibly a good indication that hard agglomerates prevail in this case. The completely modified particles could be indented with the tungsten tip, thus behaved quite differently. The microparticles showed a ductile/plastic behavior and the nanoparticles could be separated from each other. This suggests that these particles probably consist of soft agglomerates of nanoparticles which can be separated again by force. Since it was not possible to make substantiated statements regarding the interaction of the nanoparticles within the microparticle with microscopy methods such as SEM, the surface properties of the particles were studied using BET, FTIR measurements and TGA. With a view to later applications, it it was important to characterize the surface properties of the microparticles in detail, since these are essential for the dispersibility of the particles in a matrix system. Using FTIR measurements and TGA the presence and amount of silane on the particle surface was determined. There was a clear trend for the silica nanoparticles which were modified to different degrees with OCTEO. As the amount of silane increased, both the intensity of the FTIR band for CH2 and CH3 stretching and mass loss increased. In contrast to these measurements, the BET measurements showed no clear trend depending on the surface coverage of the silica nanoparticles. The highest values for the specific surface area were found for microparticles consisting of 1/5- and 1/3-modified silica nanoparticles. In these cases, the condensation of the silica nanoparticles was largely prevented by the surface alkyl groups, and at the same time, there were still enough micropores that were able to interact with the nitrogen molecules which may explain the higher values. In addition to the standard analytical methods, liquid tests were performed and Hansen dispersibility parameters (HDP) and ET (30) values with Reichardt‘s dye (RD) were determined. Based on the liquid tests, first qualitative statements, concerning the hydro- philicity or hydrophobicity of the particles, modified to a different extend with silane, were made. These results and trends were then quantitatively substantiated with the HDP and the RD experiments. The polarity of the microparticles which were built up to different degrees with OCTEO modified silica nanoparticles decreased with increasing surface coverage. This tendency correlated with the values obtained from the FTIR and TG measurements. Since it had not been possible so far to determine the degree of soft and hard agglomeration of the silica nanoparticles in the microparticles, the system was transferred to iron oxide nanoparticles. The degree of agglomeration of the nanoparticles was crucial for subsequent dispersion in a matrix: If the particles were loose, soft agglomerates, they could be redispersed into primary nanoparticles in an elastomer, while hard agglomerates would only disintegrate into undefined secondary structures. At the same time, this system transfer was intended to answer the question whether the partially modified particles are a mixture of completely and non-modified particles or whether the silane is statistically distributed over the entire surface of all nanoparticles, i.e. whether all nanoparticles are modified to the same extend with silane. Similar to the silica system, the iron oxid nanoparticles were modified to different degrees with OCTEO (0, 1/10, 1/3, 1/2, 2/3, 1) and then spray-dried. Due to their magnetic properties, the iron oxide particles could be analyzed by Zero-Field-Cooled (ZFC) and Field-Cooled (FC) measurements. This special analysis method made it possible to deduce statements on the degree of the magnetic interaction of the particles and thus indirectly on the degree of soft and hard agglomeration of the nanoparticles in the microparticle. There were significant differences in the blocking temperature (TB) between the completely and the non-modified particles. TB is the temperature at which the magnetization direction of the particles can freely fluctuate due to thermal energy. The completely modified particles had very low TB value, suggesting a weak dipole-dipole interaction between the individual iron oxide nanoparticles. In contrary to this, the non-modified iron oxide particles had a high TB value, suggesting that the nanoparticles form hard agglomerates , coming with a very small particle-particle distance and therefore a higher interaction. The values of the partially modified particles followed the trend that the TB value decreased with increasing silane coverage. In order to answer the question of the silane distribution, a mixed system consisting of completely and non-modified iron oxide nanoparticles was also spray-dried. If the partially modified particles (as example 1/2) were a mixture of non-modified and modified nanoparticles and therefore the silane was not statically distributed on the nanoparticle surface, the TB value should be the same as for the mixed system. This was not the case however, as demonstrated by the ZFC and FC measurements. The TB value of the mixed system was between the one of the completely and 2/3-modified particles, while the irreversible temperature (Tir) value corresponded to that of the non-modified particles. The width of the splitting between TB and Tir could be interpreted as a broad particle distribution (mixture of soft and hard agglomerates). For the use as fillers, the microparticles were incorporated in a PDMS matrix and ZFC and FC measurements were again performed, and the same trends were observed as for the pure nanostructured microparticles. From this it could be concluded that the completely modified iron oxide nanoparticles had been well distributed in the elastomer and thus had very little dipole-dipole interaction. With the developed system of nanostructured microparticles, the degree of soft and hard agglomeration of the nanoparticles can be adjusted more or less specifically, and additional predictions can be made about the redispersibility of the particle powder in a suitable matrix. Based on the insights gained to understand the system, more complex structures were built up. For the adjustable structuring of nanoparticles in core-satellite particles, large 100 nm silica nanoparticles were firstly functionalized with a polycarboxylate ether (PCE) and afterwards spray-dried with small and large non-modified silica nanoparticles. By choosing a suitable ratio (70:20:10, 100 nm Mel : 100 nm blank : 20 nm blank) of the particles composition was chosen, core-satellite structures were generated on the microparticle surface. The dispersion of microparticles in a liquid or in an elastomer (PDMS) resulted in isolated core-satellite structures. In situ liquid cell TEM was carried out to confirm that the dispersed core-satellite particles were not only structures created by drying-effects. It was possible to record core-satellite particles moving/rotating in relation to each other which was an indication that the small particles were bound to the larger ones. In addition to the silica-based core-satellite particles, core-satellite particles were synthesized whose satellite particles consisted of iron oxide. This proved the approach being suitable to produce multifunctional particles with different properties and structures. Part II: Application potential of nanostructured microparticles In the second part of the work, the application of the nanostructured microparticles as reinforcing fillers in isopren rubber (IR) and PDMS, as well as shear sensor in 3D printing was examined. For this purpose, the silica nanoparticles were modified with the silane bis(triethoxysilylpropyl)tetrasulfide (Si69TM) in addition to OCTEO. Si69TM is a multifunctional silane capable of covalently binding to both, the particle surface via the ethoxy groups and the elastomer via the sulphur. The mechanical investigations of the IR-silica composites demonstrated that the silane modification of the silica nanoparticles had a significant influence on the reinforcement at small strain amplitudes. While the monofunctional silane (OCTEO) revelaed a direct correlation between the degree of coverage and mechanical reinforcement (G‘) at a constant filler content, the degree of coverage of the multifunctional silane (Si69TM) had no effect. In contrast to small strain amplitudes, a completely different behavior was found for large strain amplitudes. The wear rate of the IR-silica composites decreased with increasing modification degree for both silane types. The Si69TM modified particle composites were much more resistant to wear than the OCTEO modified particle composites due to the additional matrix binding of the Si69TM. When comparing the IR-silica composites to the PDMS-silica composites, no consistent trends were found. In the PDMS system, the mechanical reinforcement by the particles was at maximum for particles being modified on their surface to an extend of 2/3 by OCTEO. These differences could be attributed to the different incorporation processes as well as the different matrices. Another potential application for the nanostructured microparticles as shear sensor in 3D printing was tested. For this purpose, the silica nanoparticles were modified with a PCE and then spray-dried. In order to completely disperse the resulting microparticles in a matrix, high shear forces and long shear rates were required, which makes a potential application as shear sensor for the current system rather challenging to be realized in practice. Part III: Extension of the approach for the preparation of nanostructured microparticles to hydroxide-based systems In the third part of this work, the system of silica particle modification was transferred to hydroxide-based particles. For this purpose, LDHs were produced by a precipitation process and then modified with OCTEO and finally spray-dried. LDHs are an interesting material due to the broad application potential like as adsorbers for gases, drug containers, and flame-retardants. Exactly as with the silica particles, the hydrophobic character of the LDH microparticles increased with increasing modification degree of the primary LDHs which could be shown by liquid tests. In addition, the microparticles consisting of completely modified LDHs could be dispersed into isolated particles in a PDMS matrix. Similar to the silica particle systems, the reinforcement of the composites was the highest for the partially modified particles (2/3). The partly modified particles consisted of a mixture of isolated LDH particles and small hard agglomerates, which lead to a mechanical reinforcement at small strain amplitudes due to the strong filler-filler interaction. The properties of the polymer-particle composites could be adjusted by the modification degree of the primary LDHs. Outlook In the present work, the synthesis of different nanostructured microparticles and their adjustable burst was shown. In order to be able to carefully adjust the disintegration of the microparticles, the modification of the nanoparticles in particular should be investigated in more detail in future woks. Although it was possible to differentiate between a mixtures of non-modified and completely modified particles compared to partially modified particles, it was not possible to make any specific statements about the distribution of the silane molecules on the particle surface. For this purpose, further characterization methods should be consulted, which analyze the modification at the molecular level. In addition, the distribution/arrangement of the partially modified nanoparticles in the microparticle should be investigated. Especially for nanoparticles with a low degree of modification (1/10, 1/5 and 1/3) different arrangements are possible. During spraydrying, the nanoparticles can either be arranged in such a way that the silane molecules orient themselves in the direction of the particle surface or in the center of the particle. The arrangement of the nanoparticles has a great influence on the polarity of the resulting microparticle powders. In addition, it has an influence on the hard agglomeration of nanoparticles and thus on the formation of complex substructures, such as core-satellite particles. In addition to the modification of the nanoparticles, the production of complex structures/supraparticles should be further optimized. With a detailed understanding of the physical processes during spray-drying, the number of satellites on the core particles could be more controlled. In principle, the system of nanostructured microparticles with adjustable burst behavior, which has been developed herein, can be adapted to a large number of applications. Since the system is suitable for many types of particles (silica, iron oxide and LDH), different nanoparticle building blocks particles could be spray-dried together to create supraparticles with completely new functionalities and properties. These can be used as reinforcing fillers in elastomers or for the stabilization of dispersions. For example, mixed particles of silica and iron oxide particles would have the advantage to stabilize a dispersion and at the same time may be magnetically recovered again. These mixed particles could also be incorporated as fillers into complex plastic components in which they act as mechanically reinforcing fillers on the one hand and, at the same time, crosslink the components by inductive heating. The inductive heating is a gentle method to selectively crosslink components, since the heat produced by the magnetic particles in the component itself and does not have to be introduced over its surface KW - Mikropartikel KW - Nanostrukturierte Mikropartikel KW - nanostructured micro-particles KW - kolloidale Silica-Nanopartikel KW - Elastomerkomposite KW - Schersensoren KW - colloidal silica-nanoparticles KW - elastomer composites KW - shear sensor KW - Nanostrukturiertes Material KW - Elastomer KW - Nanotechnologies Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176154 ER - TY - THES A1 - Sorg, Jens Rudolf T1 - Koordinationspolymere auf Antimon- und Bismut-Basis mit aromatischen Stickstoff-Donor Liganden - Einblick in Strukturen und Lumineszenz T1 - Coordinationpolymers based on antimony and bismuth with aromatic nitrogen-donor ligands - insight into structures and luminescence N2 - Im Rahmen dieser Arbeit konnten die Strukturen von 32 neuen Koordinationspolymeren (CPs) und acht neuen Komplexen auf Basis von Antimon- \bzw Bismuthalogeniden und N-Donor Liganden aufgeklärt werden. Davon konnten 26 CPs vollständig mittels diffraktometrischer, spektroskopischer und thermischer Analysetechniken charakterisiert werden. Das Hauptaugenmerk dieser Arbeit lag dabei auf den strukturellen Eigenschaften sowie den Photolumineszenzeigenschaften der antimon- \bzw bismuthaltigen Koordinationspolymere. Für die Synthese der Koordinationsverbindungen wurden die Bis- \bzw Trispyridyle 4,4'-Bipyridin (\textit{4-bipy}), 1,2-Bis(4-pyridyl)ethylen (\textit{4-bpe}), 1,2-Bis(4-pyridyl)ethan (\textit{4-bpa}) und 2,4,6-Tris(4-pyridyl)triazin (\textit{4-tpt}), die aromatischen Nitrile 4-Cyanopyridin (\textit{4-cypy}) und 2,4,6-Tris(4-cyanophenyl)triazin (\textit{4-tcpt}) sowie die Heteroaromaten Pyrazin (\textit{pyz}) und Thiazol (\textit{thz}) zusammen mit SbX$_3$ und BiX$_3$ (X: Cl, Br, I) eingesetzt. Die Reagenzien wurden unter unterschiedlichen Synthesebedingungen miteinander zur Reaktion gebracht, um die Koordination der organische Liganden zu realisieren. Auf diese Weise konnte eine Fülle an Strukturen beobachtet werden, die sich von Komplexen über eindimensionale Stränge und zweidimensionale Schichten bis hin zu dreidimensionalen Netzwerken erstreckt. Als bevorzugte Koordinationsumgebung wurde sowohl für Bi$^{3+}$, als auch für Sb$^{3+}$ verzerrte Oktaeder beobachtet. Für Antimon konnten darüber hinaus quadratisch pyramidale und tetraedrische Koordination mit stereochemisch aktiven freien Elektronenpaaren beobachtet werden, während vergleichbare Bismutverbindungen oktaedrische Koordination aufweisen. Dies verdeutlicht die stärkere Neigung des freien Elektronenpaares von Sb$^{3+}$ über sterische Wechselwirkungen mit den Liganden in Interaktion zu treten, verglichen mit jenem von Bi$^{3+}$. Die Bispyridyl Liganden \textit{4-bipy}, \textit{4-bpe} und \textit{4-bpa} formen mit den Antimon(III)- und Bismut(III)halogeniden die sublimierbaren, doppelsträngigen CPs $^{\ 1}_\infty$[E$_2$X$_6$(\textit{L})$_2$] (E: Sb, Bi; X: Cl, Br, I; L: \textit{4-bipy}, \textit{4-bpe}, \textit{4-bpa}; \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15}) sowie $^{\ 1}_\infty$[SbCl$_3$(\textit{4-bipy})] (\textbf{7}). In den CPs \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15} erfolgt die Verknüpfung der E$^{3+}$-Kationen nicht nur über die organischen Liganden, sondern auch über die Halogenidoliganden. Eine ähnliche Art der Verknüpfung tritt in den CPs $^{\ 3}_\infty[$Bi$_2$Br$_6$(\textit{4-tcpt})] (\textbf{26}) und $^{\ 2}_\infty[$Bi$_2$Br$_6$(\textit{pyz})] (\textbf{32}) auf, während in $^{\ 1}_\infty[$BiX$_3$(\textit{4-cypy})$_2$] (X: Cl, Br; \textbf{16}, \textbf{17}) die Verknüpfung sogar ausschließlich über die Halogenidoliganden erfolgt. Umsetzungen der Halogenide mit \textit{4-tpt} führen zur Ausbildung verschiedener Koordinationspolymere. Während mit den Iodiden sowohl die CPs $^{\ 1}_\infty[$EI$_3$(\textit{4-tpt})] (E: Sb, Bi; \textbf{22}, \textbf{23}), als auch $^{\ 2}_\infty[$E$_4$I$_{12}$(\textit{4-tpt})$_2$] (E: Sb, Bi; \textbf{24}, \textbf{25}) zugänglich sind, reagieren die Chloride und Bromide zu $^{\ 2}_\infty[$EX$_3$(\textit{4-tpt})] (E: Sb , Bi; X: Cl, Br; \textbf{18}-\textbf{21}). Aus dem CP $^{\ 1}_\infty[$SbCl$_3$(\textit{pyz})] (\textbf{29}), das quadratische \{SbCl$_3$N$_2$\}-Pyramiden enthält, kann durch Erhitzen das höher vernetzte $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{30}) mit oktaedrischer Sb$^{3+}$-Koordination in einer Kondensationsreaktion dargestellt werden. Eine verwandte Struktur wurde auch für die iodidhaltige Verbindung $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{31}) beobachtet werden. Die Untersuchung der Lumineszenzeigenschaften der synthetisierten Koordinationspolymere ergab, dass die breitbandigen Anregungsprozesse in den Sb- und Bi-CPs durch metal-to-ligand charge-transfer (MLCT) Prozesse hervorgerufen werden. Für die Emission stellen ligand-to-metal charge-transfer (LMCT) Übergänge von ligandzentrierten Zustände in die elektronischen Grundzustände an den anorganischen Koordinationseinheiten und inter-valence charge-transfer (IVCT) Prozesse in E$^{3+}$-Paaren die bedeutendsten Prozesse dar. Darüber hinaus konnte in einigen CPs aber auch ligandbasierte Fluoreszenz \bzw Phosphoreszenz beobachtet werden. Die Intensität der Lumineszenz ist erheblich von den enthaltenen Halogenidoliganden abhängig (Cl>Br>I), weshalb für iodidhaltige Verbindungen keine Lumineszenz beobachtet werden konnte. Darüber hinaus wurden vier lanthanoidhaltige Koordinationspolymere der Zusammensetzung $\beta$-$^{\ 1}_\infty[$Bi$_{2-x}$Ln$_x$Cl$_6$(\textit{4-bipy})$_2$] (Ln: Ce, Eu, Tb, Eu/Tb; \textbf{41:Ln}) hergestellt. Dadurch konnte die hervorragende Eignung bismutbasierter Koordinationspolymere als Wirtsverbindungen für Ln$^{3+}$-Kationen nachgewiesen werden. In diesen Verbindungen führt die Anregung des Wirtsgitters über einen Energietransfer zu den charakteristischen Eu$^{3+}$- und Tb$^{3+}$-Emissionen. Die Anwesenheit von Ce$^{3+}$ führt hingegen zu einer deutlichen Intensitätssteigerung der Lumineszenz der Wirtsverbindung. Somit sind auf diese Weise effiziente Phosphore mit variablen Lumineszenzfarben zugänglich. Insgesamt konnten im Rahmen dieser Arbeit zahlreiche neue Sb- und Bi-basierte Koordinationsverbindungen mit N-Donor Liganden dargestellt werden und neue Erkenntnisse über ihre strukturellen Eigenschaften und Photolumineszenzeigenschaften erhalten werden. N2 - Within the scope of this thesis the structures of 32 new coordination polymers (CPs) and eight new complexes constructed from antimony- and bismuthhalides could be identified. 26 of these CPs could be completely characterised by diffractometric, spectroscopic and thermal analytical methods. The main goal of this thesis was to investigate the structural properties as well as the photoluminescence properties of antimony- and bismuth-based coordination polymers. The bis- and trispyridyls 4,4'-bipyridine (\textit{4-bipy}), 1,2-bis(4-pyridyl)ethene (\textit{4-bpe}), 1,2-bis(4-pyridyl)ethane (\textit{4-bpa}) and 2,4,6-tris(4-pyridyl)triazine (\textit{4-tpt}), the aromatic nitriles 4-cyano-pyridine (\textit{4-cypy}) and 2,4,6-tris(4-cyanophenyl)triazine (\textit{4-tcpt}) as well as the heterocycles pyrazine (\textit{pyz}) and thiazole (\textit{thz}) were used as organic ligands together with SbX$_3$ and BiX$_3$ for the synthesis of the coordination compounds. Various synthetic routes were investigated to allow the coordination of the organic ligands. Thereby, a variety of structures could be obtained ranging from complexes over one-dimensional strands and two-dimensional layers to three-dimensional networks. An octahedral coordination was observed to be preferred by both Bi$^{3+}$ and Sb$^{3+}$. Square pyramidal and tetrahedral coordination spheres have been discovered for antimony as well illustrating the stronger tendency of the antimony lone-pair for sterical interactions with the ligands, when compared to the bismuth lone pair. The bispyridyl-ligands \textit{4-bipy}, \textit{4-bpe} and \textit{4-bpa} form the double-stranded CPs $^{\ 1}_\infty$[E$_2$X$_6$(\textit{L})$_2$] (E: Sb, Bi; X: Cl, Br, I; L: \textit{4-bipy}, \textit{4-bpe}, \textit{4-bpa}; \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15}) and $^{\ 1}_\infty$[SbCl$_3$(\textit{4-bipy})] (\textbf{7}) with antimony(III)- and bismuth(III)halides. The E$^{3+}$-cations are interconnected by the organic ligands as well as the halogenidoligands in the CPs \textbf{1}-\textbf{6}, \textbf{8}-\textbf{15}. A similar interconnection can be observed in $^{\ 3}_\infty[$Bi$_2$Br$_6$(\textit{4-tcpt})] (\textbf{26}) and $^{\ 2}_\infty[$Bi$_2$Br$_6$(\textit{pyz})] (\textbf{32}), while the E$^{3+}$-cations in $^{\ 1}_\infty[$BiX$_3$(\textit{4-cypy})$_2$] (X: Cl, Br; \textbf{16}, \textbf{17}) are solely interconnected by the halogenidoligands. By reaction of the halides with \textit{4-tpt} different coordination polymers can be obtained. While the iodides form the CPs $^{\ 1}_\infty[$EI$_3$(\textit{4-tpt})] (E: Sb, Bi; \textbf{22}, \textbf{23}) and $^{\ 2}_\infty[$E$_4$I$_{12}$(\textit{4-tpt})$_2$] (E: Sb, Bi; \textbf{24}, \textbf{25}), reactions of the chlorides and bromides lead to $^{\ 2}_\infty[$EX$_3$(\textit{4-tpt})] (E: Sb , Bi; X: Cl, Br; \textbf{18}-\textbf{21}). The coordination polymer $^{\ 1}_\infty[$SbCl$_3$(\textit{pyz})] (\textbf{29}) contains square \{SbCl$_3$N$_2$\}-pyramids and reacts to the three-dimensional coordination polymer $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{30}) in a condensation reaction when heated. \textbf{30} features \textit{fac}-\{SbCl$_3$N$_3$\}-octahedra linked in all three dimensions by the organic ligands. A closely related structure could be discovered for the iodide-containing compound $^{\ 3}_\infty[$Sb$_2$Cl$_6$(\textit{pyz})$_3$] (\textbf{31}). Investigations of the photoluminescence properties of the presented cooridnation polymers showed that broad-banded excitation processes of the Sb- and Bi-CPs are due to metal-to-ligand charge-transfer (MLCT) transistions. Ligand-to-metal charge-transfer (LMCT) from ligand-centred electronic states to the electronic ground-state at the inorganic coordination units and inter-valence charge-transfer transistions in E$^{3+}$-pairs are the most important emission processes. Moreover, ligand-based fluorescence or phosphorescence could be observed in some CPs as well. The luminescence intensity is depending on the nature of the halogenido-ligands significantly (Cl>Br>I). Hence, no lumescence could be observed for compounds containing iodide at all. Additionally, the four lanthanide-containing CPs $\beta$-$^{\ 1}_\infty[$Bi$_{2-x}$Ln$_x$Cl$_6$(\textit{4-bipy})$_2$] (Ln: Ce, Eu, Tb, Eu/Tb; \textbf{41:Ln}) were synthesized in the scope of this thesis, which establish Bi-CPs as remarkable hosts for Ln$^{3+}$-cations. In these compounds the excitation of the bismuth-based host-network leads to the characteristic luminescence of the Eu$^{3+}$- and Tb${3+}$-cations by an energy transfer. However, the presence of Ce$^{3+}$ leads to a significant increase in intensity of the host-luminescence. Hence, efficient phosphors with customizable luminescence-colours can be obtained via this approach. Alltogether various new Sb- and Bi-based coordination compounds featuring N-donor-ligands could be obtained during this work. This allowed for new insights in their structural properties as well as their photoluminescence properties. KW - Photolumineszenz KW - Bismut KW - Antimon KW - Polymerkomplexe KW - Lanthanoide KW - N-Donor Liganden KW - Kristallstrukturen KW - Statistischer Ersatz Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211074 ER -