TY - THES A1 - Hügel, Markus T1 - The control of nanomorphology in star-shaped mesogens T1 - Die Steuerung der Nanomorphologie von sternförmigen Mesogenen N2 - Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined. N2 - Auf Stilben basierende sternförmige Mesogene wurden mit als auch ohne Fullerengäste synthetisiert. Die thermotropen Eigenschaften und der Mechanismus der Raumfüllung in den Mesophasen dieser Systeme wurden untersucht. KW - Flüssigkristall KW - Fullerene KW - Porphyrin KW - Mesogen KW - Raumfüllung KW - Dyade KW - Nanosegregation KW - Fulleren-Netzwerk KW - Mesogen KW - Space filling KW - Dyad KW - Nanosegregation KW - fullerene network KW - Hekate Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-165321 ER - TY - THES A1 - Roos, Markus T1 - Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems T1 - Synthese, Photophysik und Photokatalyse von [FeFe]-Komplex enthaltenden Dyaden und bimolekularen Systemen N2 - In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis. N2 - Im Rahmen dieser Arbeit konnten insgesamt drei photokatalytisch aktive Dyaden zur Protonenreduktion zusammen mit den zugehörigen Einzelkomponenten synthetisiert werden. Zwei von ihnen, D1 und D2, umfassten einen [Ru(bpy)3]2+-Photosensibilisator und D3 einen [Ir(ppy)2bpy]+-Photosensibilisator. Als Katalysator wurde in allen Systemen ein Ppyr3-substituierter Propyldithiolat-[FeFe]-Komplex verwendet. Die absorptionsspektroskopischen und elektrochemischen Untersuchungen zeigten, dass eine innerdyadische elektronische Kopplung aufgrund von Konjugationsblockern innerhalb der verwendeten Brückeneinheiten wirksam verhindert wird. Die photokatalytischen Untersuchungen zeigten, dass alle dyadenhaltigen Zweikomponentensysteme (2CS) eine signifikant schlechtere Leistung zeigten als die entsprechenden bimolekularen Dreikomponentensysteme (3CS). Mithilfe der transienten Absorptionsspektroskopie konnte gezeigt werden, dass sich die 2CS während der Photokatalyse sehr ähnlich wie die zugehörigen Mehrkomponentensysteme verhalten. Das Elektron, das für den intramolekularen Transfer von der Photosensibilisatoreinheit zur Katalysatoreinheit innerhalb der Dyaden vorgesehen war, verbleibt analog zu den 3CS und trotz des kovalent gebundenen Katalysators relativ lange am Photosensibilisator. Es wird daher angenommen, dass dieser intramolekulare Elektronentransfer wahrscheinlich aufgrund der schwachen elektronischen Kopplung, die durch die verwendeten Brückeneinheiten verursacht wird, behindert wird. Stattdessen umgeht das System dies durch einen intermolekularen Transfer zu anderen Dyadenmolekülen in unmittelbarer Nähe. Darüber hinaus konnte mithilfe von Emissionslöschungsexperimenten und elektrochemischen Untersuchungen eindeutig darauf geschlossen werden, dass alle untersuchten Systeme während der Photokatalyse über den reduktiven Löschmechanismus ablaufen. KW - Fotokatalyse KW - Elektronentransfer KW - proton reduction KW - [FeFe] hydrogenase mimic KW - dyad KW - ruthenium photosensitizer KW - iridium photosensitizer KW - Protonenreduktion KW - [FeFe]-Hydrogenase Imitator KW - Dyade KW - Ruthenium-Photosensibilisator KW - Iridium-Photosensibilisator Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234537 ER - TY - THES A1 - Sieck, Carolin T1 - Synthesis and Photophysical Properties of Luminescent Rhodacyclopentadienes and Rhodium 2,2'-Biphenyl Complexes T1 - Synthese und photophysikalische Eigenschaften von lumineszierenden Rhodacyclopentadienen und Rhodium 2,2'-Biphenyl Komplexen N2 - The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment. Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes. In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies. In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors. Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before. As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane. Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes. On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature). With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure  and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster. In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields. Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands. Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work. Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed. Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes. Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided. The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct). CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase. N2 - Die photochemischen und photophysialischen Eigenschaften von Übergangsmetall-komplexen sind von großem Interesse, da solche Materialien für eine Vielzahl von Anwendungen, zum Beispiel in der Photokatalyse, für Sensing und Imaging, als Multiphotonenabsorptionsmaterialien und in der Herstellung von OLEDs genutzt werden können. Ein grundlegendes Verständnis des angeregten Zustands von Übergangsmetallverbindungen ist daher für die Entwicklung neuer Materialen für die oben genannten Anwendungen maßgeblich. Grundsätzlich können die Lumineszenzeigenschaften dieser Klasse von Verbindungen einerseits durch das Metall selbst, oder andererseits durch subtile Modifikation der Ligandensphäre beeinflusst werden. Darüber hinaus spielen Übergangsmetallkomplexe weiterhin eine wichtige Rolle in der modernen Synthesechemie. Insbesondere können Bindungen selektiv geknüpft werden, die in der klassischen organischen Chemie nur schwer zugänglich oder nicht realisierbar sind. So ermöglichen sie beispielsweise die effiziente und selektive Knüpfung von Kohlenstoff-Kohlenstoff-Bindungen. Ein bekanntes Beispiel für solch eine Bindungsknüpfung sind metallkatalysierte Ringschlussreaktionen. Hierbei spielen Metallacyclopentadien-Komplexe als Zwischenstufen bei metallvermittelten oder katalysierten Ringschlussreaktionen, wie beispielsweise der [2+2+2] Cyclotrimerisierung von Alkinen, eine Schlüsselrolle. Die jüngsten Forschungen konzentrierten sich auf die Synthese und Charakterisierung dieser metallacyclischen Zwischenprodukte, auch MC4-Ringsysteme genannt, welche strukturell mit Hauptgruppen-EC4-Systemen wie Borolen, Silolen, Thiophenen und Phospholen verwandt sind. Insgesamt ist diese Gruppe von Verbindungen (EC4-Analoga) wohlbekannt und hat aufgrund ihrer Elektronentransport- und optischen Eigenschaften beträchtliche Aufmerksamkeit erregt. Im Gegensatz zu Übergangsmetallanaloga zeigen Hauptgruppen-EC4-Systeme jedoch keine Phosphoreszenz, was auf eine ineffiziente Spin-Bahn-Kopplung zurückzuführen ist. Im Vergleich dazu zeigen Übergangsmetalle der fünften und sechsten Periode Phosphoreszenz, weshalb es von großem Interesse ist, die Lumineszenzeigenschaften der Metallacyclopentadiene näher zu untersuchen. Im Jahr 2001 entwickelte Marder et al. eine Eintopfsynthese von lumineszierenden 2,5 Bis(arylethinyl)rhodacyclopentadienen durch reduktive Kupplung von 1,4 Diarylbuta 1,3 diinen an einer geeigneten Rhodium(I)-Vorstufe. In den vergangenen Jahren wurden eine Vielzahl von Liganden (z.B. TMSA, S,S'-Diethyldithiocarbamat, usw.) und Substarten (1,4-Bis(p-R-phenyl)-1,3-butadiine oder verknüpfte ,-Bis(p-R-arylethinyl)alkane (R = Elektronen-ziehende oder schiebende Gruppen)) untersucht, wobei stets eine selektive Reaktion zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen beobachtet werden konnte. Trotz des Zentralatoms Rhodium wurde ausschließlich Fluoreszenz beobachtet. Um den Einfluss der Ligandensphäre um das Rhodiumatom auf die Interkombination (Intersystem-Crossing Prozesse, ISC) in diesen fluoreszierenden Rhodacyclopentadienen zu untersuchen und den Metallcharakter in den Grenzorbitalen durch Destabilisierung der Rhodium-d-Orbitale zu erhöhen, wurde Acetylacetonat (acac), ein  Elektronen-schiebender Ligand, eingeführt. Interessanterweise beobachtete Tay im Jahr 2010 durch Reaktion von , Bis(p R arylbutadiinyl)alkanen mit [Rh(κ2-O,O-acac)(PMe3)2] nicht nur die fluoreszierenden 2,5-Bis(arylethinyl)-rhodacyclopentadiene, sondern auch einen isomeren Rhodium 2,2' Biphenyl Komplex, der in ersten photophysikalischen Studien Phosphoreszenz zeigte. In dieser Arbeit wurden das Reaktionsverhalten und die Reaktionsbedingungen von [Rh(κ2 O,O acac)(L)2] (L = PMe3, P(p-tolyl)3) mit verschiedenen , Bis(p R-arylbutadiinyl)alkanen untersucht. Weiterhin wurde die Trennung der beiden Isomere 2,5-Bis(arylethinyl)rhodacyclopentadien (A) und Rhodium-2,2'-bph-Komplex (B) optimiert und die photophysikalischen Eigenschaften der beiden Isomere untersucht. Die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen führt selektiv zum 2,5-Bis(arylethinyl)rhodacyclopentadien-Isomer A, welches nur schwach fluoresziert. Wird jedoch der Phosphanligand P(p-tolyl3) mit PMe3 ersetzt, führt die Reaktion von [Rh(κ2 O,O acac)(PMe3)2] und ,-Bis(arylbutadiinyl)alkanen zu zwei verschiedenen Isomeren von MC4-Metallacyclen mit grundverschiedenen photophysikalischen Eigenschaften. 2,5 Bis(arylethinyl)rhodacyclopentadiene (A) werden durch eine reduktive [2+2]-Kopplung an Rhodium gebildet und weisen eine intensive Fluoreszenz auf. Das zweite Isomer waren Rhodium-2,2'-bph-Komplexe (B), die Phosphoreszenz zeigen. Dies rührt von einer ungewöhnlichen [4+2]-Cycloadditionsreaktion und einer nachfolgenden  H Verschiebung her. Die Kontrolle des Isomeren-Verhältnisses von 2,5-Bis(arylethinyl)rhodacyclopentadienen (A) und Rhodium-2,2'-bph-Komplexen (B) erfolgt durch Modifizierung der Alkankette des verknüpften ,-Bis(arylbutadiinyl)alkans. Die Veränderung der Ligandenbrücke von vier zu drei CH2-Gruppen begünstigt die Bildung des Rhodium-Biphenyl-Isomers B drastisch und bietet einen grundsätzlich neuen Weg, um Zugang zu photoaktiven Biphenyl-Metallverbindungen in guten Ausbeuten zu erhalten. Die photophysikalischen Eigenschaften sind bisher nur von einer begrenzten Anzahl an Biphenyl-Komplexen von Iridium, Palladium und Platin untersucht worden, wobei die geringe Menge an Beispielen vermutlich auf limitierte Synthesestrategien von verschieden-substituierten 2,2'-bph Übergangsmetall-komplexen zurückzuführen ist. Da die Reaktion von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit ,-Bis(arylbutadiinyl)alkanen selektiv zu 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexen mit P(p-tolyl3) als Phosphanliganden führt, und um die zeitaufwendige Trennung der Isomere zu vermeiden, wurde eine neue Synthesestrategie für 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexe mit PMe3 als Phosphanliganden entwickelt. Die relativ schwache Rhodium-P(p tolyl)3 Bindung von 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplexen ermöglicht Liganden-Austauschreaktionen. Durch Zugabe von PMe3 im Überschuss bei Raumtemperatur wurde eine schrittweise Reaktion beobachtet, wobei zuerst die monosubstituierte Phosphan Rhodacyclopentadien-Zwischenstufe und anschließend durch Erwärmung vollständige Umsetzung und somit der zweifach PMe3 substituierte 2,5 Bis(arylethinyl)rhodacyclopentadien-Komplex erhalten werden konnte. Die isolierten 2,5-Bis(arylethinyl)rhodacyclopentadien-Komplexe A (mit PMe3 als Phosphanliganden) und Rhodium-2,2'-bph-Komplexe B wurden auf ihre photophysikalischen Eigenschaften hin untersucht. Isomer A ist stark fluoreszierend mit hohen Quantenausbeuten von bis zu 54% und sehr kurzen Lebenszeiten (τ = 0,2  2,5 ns) in Lösung bei Raumtemperatur. Sogar bei 77 K in Glasmatrizen wird keine Phosphoreszenz beobachtet, was im Einklang mit früheren Beobachtungen von Steffen et al. ist, die zeigten, dass Spin-Bahn-Kopplung (SOC) durch das Schwermetallatom in 2,5-Bis(arylethinyl)rhodacyclopentadienen und 2,5 Bis(arylethinyl)iridacyclopentadienen vernachlässigbar ist. Der Ursprung dieser Fluoreszenz liegt in der reinen Intra-Ligand-Natur der angeregten Zustände S1 und T1. Das HOMO und das LUMO sind fast reine - und *-Ligandenorbitale und das HOMO ist energetisch gut von den gefüllten d-Orbitalen des Rhodiums getrennt. Die Abwesenheit von Phosphoreszenz in Übergangsmetallkomplexen ist aufgrund des dominierenden IL-Charakters der angeregten Zustände bei schwereren Homologen, im Vergleich zu Rhodium, und somit größeren Spin Bahn Kopplungskonstanten nicht ungewöhnlich, auch wenn ISC von S1→Tn ausreichend effizient ist, um Triplett-Zustände zu erreichen. Allerdings gibt es im Vergleich zu unseren Rhodacyclopentadienen sehr wenige Komplexe, die Fluoreszenz mit der Effizienz und mit diesen außergewöhnlich langsamen Intersystem-Crossing Prozessen im Nanosekundenbereich anstatt von einigen Pikosekunden oder schneller besitzen. Im Gegensatz dazu sind die Rhodium-2,2'-bph-Komplexe B ausschließlich phosphoreszierend, wie es für Übergangsmetallkomplexe erwartet wird. Sie zeigen bei langen Lebenszeiten (Hunderte von s) Phosphoreszenz-Quantenausbeuten von bis zu 33% bei Raumtemperatur in Lösung. Da auch bei niedriger Temperatur keine Fluoreszenz festgestellt wird, kann davon ausgegangen werden, dass S1→Tn-ISC schneller als Fluoreszenz und strahlungslose Relaxation aus dem S1-Zustand sein muss. Dies ist jedoch gegenläufig zum Verhalten der isomeren 2,5 Bis(arylethinyl)rhodacyclopentadiene, für die ein ungewöhnlich langsames ISC auf der Zeitskala auftritt, die mit Fluoreszenz konkurrenzfähig ist (siehe oben). Die sehr kleinen Werte für die Strahlungsgeschwindigkeitskonstanten weisen jedoch darauf hin, dass der T1-Zustand reinen 3IL-Charakter mit schwacher Spin-Bahn-Kopplung vom Rhodiumatom ausgehend besitzt. Die Phosphoreszenz-Effizienz dieser Komplexe in Lösung bei Raumtemperatur ist noch beeindruckender, da die nicht-strahlende Kopplung des angeregten Zustands mit dem Grundzustand typischerweise die Phosphoreszenz hemmt. Stattdessen erlaubt die Rigidität des organischen -Systems, dass der ligandenbasierte angeregte Triplettzustand für mehrere hundert s stabil vorliegt und einen effizienten strahlenden Übergang in den Grundzustand vollzieht. Die außergewöhnlich langen Lebensdauern und kleinen Strahlungsgeschwindigkeitskonstanten der Rhodium-2,2'-bph-Komplexe sind vermutlich ein Ergebnis des hochkonjugierten -Systems des organischen Liganden. Laut unseren TD-DFT-Studien wird die Elektronendichte durch Ladungstransfer vom Rhodiumatom auf die Arylethinylreste übertragen und verringert somit die Spin-Bahn-Kopplung des Metallzentrums, die für eine kurze Phosphoreszenzlebenszeit erforderlich wäre. Diese Ergebnisse zeigen, dass der π-chromophore Ligand maßgeblich Einfluss auf den angeregten Zustand hat, dass auch schwere Übergangsmetallkomplexe wie Rhodium fluoreszieren können, wie es eigentlich nur von Hauptgruppenanaloga bekannt ist. Aufgrund der erhaltenen Ergebnisse und im Hinblick auf die Modifikation der optischen Eigenschaften und darüber hinaus das Reaktionsverhalten dieser Rhodiumkomplexe zu erforschen, wurde der Einfluss der Ligandensphäre um das Rhodiumatom untersucht. In Anbetracht dessen, dass die P(p-tolyl)3-Liganden leicht durch die stärker -donierenden PMe3 Liganden er-setzt werden können, wurden Ligandenaustausch-reaktionen mit N heterocyclischen Carbenen (NHCs) als noch stärkere -Donoren unter-sucht. Die Addition von zwei Äqui-valenten NHC führt bei Raumtemperatur zur Substitution von nur einem Äquivalent P(p-tolyl3) und somit zur Bildung des monosubstituierten NHC Rhodiumkomplexes. Die Reaktion des isolierten Mono-NHC-Komplexes mit einem weiteren Äquivalent NHC bei Raumtemperatur führte jedoch auch nicht zum gewünschten Austausch des zweiten Phosphanliganden. Erhöhung der Reaktionstemperatur auf 60 °C resultiert in der Bildung des tetra-substituierten NHC-Rhodiumkomplexes [Rh(nPr2Im)4]+[acac]-. Um zweifach NHC-substituierte 2,5 Bis(arylethinyl)-rhodacyclopentadiene zu erhalten, wurde eine neue Syntheseroute entwickelt. Durch Reaktion des Bis-NHC-Komplexes [Rh(κ2 O,O acac)(nPr2Im)2] mit , Bis(arylbutadiinyl)alkanen bei Raumtemperatur konnten 2,5 Bis(arylethinyl)rhodacyclopentadiene mit NHC-Liganden in cis- und trans-Stellung zueinander erhalten werden und durch NMR-spektroskopische Messungen und Einkristallröntgenbeugungsanalyse identifiziert werden. Die Isolierung und volle Charakterisierung sowie eine fundamentale photophysikalische Studie konnten im Rahmen dieser Arbeit aus Zeitgründen nicht beendet werden. Weiterhin wurden die optischen Eigenschaften und das Reaktionsverhalten von Rhodiumkomplexen mit einem verkürzten konjugierten -System des chromophoren Liganden untersucht. Hierbei werden zur Synthese anstatt Tetrainen, Diine eingesetzt. Die Umsetzung von [Rh(κ2-O,O-acac)(PMe3)2] mit 1,7-Diaryl-1,6-heptadiinen führt zur selektiven Bildung von 2,5 Bis(aryl)rhodacyclopentadienen. Diese Verbindungen sind jedoch nur sehr schwach fluoreszierend, was sich in Quantenausbeuten ФPL < 1% und sehr kurzen Emissionslebenszeiten in Toluol bei Raumtemperatur zeigt. Vermutlich führt Schwingung und Rotation des Bis(phenyl)butadien-Grundgerüsts vermehrt zu strahlungsloser Relaxation in den Grundzustand und ist somit für die geringeren Quantenausbeuten im Vergleich zu PMe3-Komplexen mit dem Bis(phenylethinyl)butadien-Grundgerüst verantwortlich. Phosphoreszenz konnte auch bei Tieftemperaturmessungen bei 77 K in der Glasmatrix nicht beobachtet werden. Die Reaktionen von [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] mit 1,7-Diaryl-1,6-heptadiinen führten jedoch zu einer metallvermittelten oder -katalysierten Cycloadditionsreaktion von Alkinen und zur Bildung von Dimerisierungs- und Trimerisierungsprodukten. Arylphosphan-Liganden (P(Ar)3 (Ar = Aryl)) gelten als schwächere -Donorliganden und haben daher eine höhere Tendenz zur Dissoziation. Hiermit lässt sich erklären, dass Rhodium(I)-Komplexe mit Arylphosphan-Liganden eine zunehmende Tendenz haben, katalytische Reaktionen einzugehen, während die stärkeren -Donor-Liganden (PMe3 oder NHCs) die Bildung stabiler Rhodiumkomplexe begünstigen. In Kapitel 4 werden die Ergebnisse der Untersuchung von NHCs und cyclischen (Alkyl)(amino)carbenen (CAACs) präsentiert. Diese Verbindungen besitzen einzigartige elektronische und sterische Eigenschaften und sind daher als Liganden für Katalysatoren in organokatalytischen Reaktionen von großem Interesse. In dieser Arbeit werden Studien von Substitutionsreaktionen an neuartigen Carbonylkomplexen von Rhodium und Nickel vorgestellt. Zur Charakterisierung und zur Einordnung von CAACmethyl wird mit der großen Menge an Daten, die für NHCs und sterisch- anspruchsvollere CAAC-Liganden zur Verfügung stehen, ein Überblick über physikochemische Parameter (Elektronik, Sterik und Bindungsstärke) gegeben. Die Reaktion von [Rh(-Cl)(CO)2]2 mit zwei Äquivalenten CAACmethyl führte bei tiefer Temperatur zur Bildung des mononuklearen Komplexes cis-[(RhCl(CO)2(CAACmethyl)]. Bei Raumtemperatur jedoch bildeten sich durch Reaktion von [Rh(-Cl)(CO)2]2 mit CAACmethyl der mononukleare Komplex [(RhCl(CO)(CAACmethyl)2], die chlorverbrückten Komplexe [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 und ein Kohlenmonoxid-Aktivierungsprodukt. Das Kohlenmonoxid-Aktivierungsprodukt wird vermutlich durch Reaktion von zwei Äquivalenten des CAACs mit CO und anschließender Umlagerung durch Migration der Dipp-Gruppe gebildet. Während klassische N-heterocyclische Carbene nicht elektrophil genug sind, um mit CO zu reagieren, gehen verwandte Diamidocarbene und (Alkyl)(amino)carbene Additionsreaktionen mit CO ein. Für die selektive Synthese des CAAC-disubstituierten mononuklearen Komplexes wurden acht Äquivalente CAACmethyl mit einem Äquivalent [Rh(-Cl)(CO)2]2 umgesetzt. Für die Auswertung von TEP-Werten wurde [Ni(CO)3(CAAC)] in Zusammenarbeit mit der Gruppe um Radius synthetisiert. Durch Isolierung der Komplexe [(RhCl(CO)(CAACmethyl)2] und [Ni(CO)3(CAAC)] war es weiterhin möglich, die elektronischen und ster-ischen Parameter von CAACmethyl zu untersuchen. Genau wie die sterisch anspruchsvolleren Ver-bindungen CAACmenthyl und CAACcy, ist das Methyl substituierte CAAC im Vergleich zu üblichen NHCs ein besonders starker -Donor. Während dieser einen sehr ähnlichen TEP-Wert von 2046 cm-1 aufweist, besitzt er zusätzlich ausgezeichnete -Akzeptor-Eigenschaften (P = 67,2 ppm Phosphinidenaddukt). Durch das tiefliegende LUMO und das kleine HOMO-LUMO-Gap sind CAACs sehr effektiv für die Isolierung einer Vielzahl von ansonsten instabilen diamagnetischen und paramagnetischen Spezies von Hauptgruppen- und Übergangs-metallverbindngen. Die elektronischen Eigenschaften erlauben auch freien CAACs, kleine Moleküle mit starken Bindungen zu aktivieren. Eine neuere Entwicklung ist die Verwendung von CAACs als Liganden in Übergangsmetall-komplexen, die bisher nur als kurzlebige katalytische Zwischenstufen postuliert wurden.[271,324] Die Isolierung dieser reaktiven Spezies ermöglicht ein besseres Verständnis für bereits bekannte katalytische Reaktionen, sowie die Entwicklung neuer Katalysatoren und Anwendungen. Sol entwickelte Radius et al.[300] zum Beispiel einen CAAC-Komplex aus Kobalt als Vorläufer für die Dünnfilmabscheidung von Werkstoffen und Steffen et al.[326] berichtete von CAAC-Kupfer-Komplexen mit sehr hohen Photolumineszenz-Quantenausbeuten, die in LED Geräten eingesetzt werden könnten. Mit der Entwicklung von günstigen und flexiblen Synthesemethoden für die Herstellung von CAACs und deren entsprechenden Übergangsmetallkomplexen sowie der Kenntnis ihrer elektronischen Eigenschaften scheint es sicher, dass Anwendungen rund um dieses Ligandensystem weiter zunehmen werden. KW - Fluorescence KW - Phosphorescence KW - Rhodium KW - Sonogashira coupling KW - Carbenes KW - Übergangsmetallkomplexe KW - Rhodium KW - Lumineszenz Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154844 ER - TY - THES A1 - Ceymann, Harald T1 - Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores T1 - Synthese und Optisch Spektroskopische Eigenschaften von Squarain Superchromophoren N2 - In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance. N2 - Diese Arbeit beschreibt die Synthese von einigen linearen und stern-förmigen Squarain Superchromophoren die auf Indol Derivaten basieren. Außerdem werden sowohl deren lineare und nicht lineare spektroskopische Eigenschaften als auch ihr elektrochemisches Verhalten präsentiert. Der Versuch ähnliche Farbstoffe mit Benzothiazol Derivaten zu synthetisieren schlug leider fehl. Allerdings konnte ein stern-förmiges Trimer hergestellt und untersucht werden, dessen Äste aus einem gemischten Indol-Benzothiazol Squarain bestehen. Die linearen spektroskopischen Eigenschaften, wie Rotverschiebung und die Verbreiterung der Absorption, aller Superchromophore konnten mit Hilfe der Exzitonen-Kopplungs Theorie erklärt werden. Die Heterochromophore (SQA)2(SQB)-N, (SQA)(SQB)2-N und (SQA)(SQB)-NH zeigten zusätzlich zu der typischen Squarain Fluoreszenz aus dem niedrigsten angeregten Zustand einige Besonderheiten die lokalisierten Zuständen zugeordnet werden konnten. Während die Farbstoffe mit einem Stickstoffkern lediglich geringe Fluoreszenzquantenausbeuten zeigen, zeigen die anderen Superchromophore im Vergleich mit den monomeren Squarainen teilweise erheblich größere Fluoreszenzquantenausbeuten. Transiente Absorptionsspektroskopie Messungen der stern-förmigen Farbstoffe legen nahe, dass deren formell degenerierte S1 Zustände wegen einer Abweichung von der C3-Symmetrie aufspalten. Durch diese Abweichung bekommt auch der Übergang vom Grundzustand zum höchsten exzitonischen Zustand, der sich aus den S1-Zuständen der Monomere ableiten lässt, ein merkliches Übergangsdipolmoment und kann daher in den linearen Absorptionsspektren beobachtet werden. Die linearen Oligomere und die stern-förmigen Superchromophore die einen Benzol oder Triarylamin Kern haben zeigten mindestens additives, manchmal auch verstärkendes Verhalten in der Zweiphotonenabsorption. Zusätzlich zu den größeren molekularen Zweiphotonenabsorptions-Querschnitten sind auf Grund von Symmetriebrüchen und einer hohen Dichte von Zuständen die nicht linearen Absorptionsbanden merklich verbreitert. Im Falle der Donor substituierten Azulen-Squaraine, war es nicht möglich wegen sterischen Gründen oder unstabilen Zwischenprodukten in der Synthese, das Gleichgewicht der cisoiden und der transoiden Struktur so zu verschieben das in Lösung nur noch eine der beiden Strukturen beobachtet wird. KW - Squaraine KW - Squaraine KW - Chromophor Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136850 ER - TY - THES A1 - Maisch, Stefan T1 - Synthese von V- und brettförmigen Nematogenen und die Untersuchung ihrer biaxialen Ordnung in Mesophasen T1 - Synthesis of V- and board-shaped nematogens and the investigation of their biaxial order in mesophases N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Untersuchung V- und brettförmiger Flüssigkristalle zur Realisierung einer biaxialen nematischen Mesophase. Es wurde erfolgreich eine Serie neuer Mesogene mit hockeyschlägerförmiger und V-förmiger Struktur synthetisiert. Zusätzlich wurden Dimere aus einem dieser hockeyschlägerförmigen Verbindungen dargestellt. Als Kernbaustein wurde Benzo[1,2-b:4,3-b']dithiophen verwendet, dessen lokales Kerndipolmoment von 1.0 Debye sich nach theoretischen Vorgaben zusätzlich zum Bindungswinkel (108.9 °) positiv auf die Bildung einer Nb-Phase auswirken soll. Überraschenderweise bilden nur die hockeyschlägerförmigen Moleküle eine uniaxiale, optisch positive nematische Mesophase aus. Alle anderen V-förmigen Verbindungen und sogar die Dimere sind ausschließlich kristallin und keine Flüssigkristalle. Die Einkristallstrukturanalyse eines hockeyschlägerförmigen Mesogens sowie eines V-förmigen Moleküls zeigt bemerkenswerte Ähnlichkeiten auf. Ein Modell des Phasenübergangs wird präsentiert, welches die Abwesenheit der nematischen Mesophase in der Familie der V-förmigen, formstabilen Mesogene mit terminalen aliphatischen Ketten erklärt. Zudem befasst sich die Arbeit mit der Synthese und der Untersuchung brettförmiger Moleküle, welche dem optimalen Seitenverhältnis von 15 : 5 : 3 mit L > B > T zur Bildung biaxialer Mesophasen, relativ nahekommen. Ein Anthrachinon-Kernbaustein wurde dabei mit Armen bestehend aus einem Oligo(phenylenethinylen)-Grundgerüst entsprechender Länge verknüpft. Es konnten verschiedene dachförmige Mesogene dargestellt werden, bei denen die Art und Anzahl der Seitenketten sowie der terminalen Ketten variiert wurde. Thermische sowie mikroskopische Untersuchungen zeigen bei allen Verbindungen eine breite nematische Mesophase. Mittels spezieller Röntgenstreuung im magnetischen Feld kann die Bildung nematischer Domänen mit SmC-artigen biaxialen Aggregaten bestätigt werden. N2 - The present work deals with the synthesis and investigation of V- and board¬¬¬-shaped liquid crystals for the realization of a biaxial nematic mesophase. A series of new mesogens has been succesfully prepared, realizing hockey-stick, hockey-stick dimer and V-shaped molecular topologies. As a core unit, benzo[1,2-b: 4,3-b ']dithiophene was used, whose local core dipole moment of 1.0 Debye in addition to the bond angle (108.9 °) is supposed to have a positive effect on the formation of an Nb-phase according to theoretical guidelines. Surprisingly, only the hockey stick molecules form a uniaxial, optically positive nematic mesophase. All other V-shaped compounds and even the dimers are exclusively crystalline and no liquid crystals. Single crystal structure of a hockey-stick mesogen and a V-shaped molecule shows remarkable similarities. A model of the phase transition is presented, which explains the absence of the nematic mesophase in the family of V-shaped, shape-persistent mesogens with terminal aliphatic chains. In addition, the work is about the synthesis and investigation of board-shaped molecules, which are relatively close to the optimal aspect ratio of 15 : 5 : 3 with L > W > D for the formation of biaxial mesophases. An anthraquinone core building block was linked to arms consisting of an oligo(phenylenethynylene) scaffold of appropriate length. Different roof-shaped mesogens could be presented, in which the type and number of the side chains and the terminal chains as well, were varied. Thermal and microscopic studies show a broad nematic mesophase for all compounds. By means of special X-ray scattering in the magnetic field, the formation of nematic domains with SmC-like biaxial aggregates can be confirmed. KW - Thermotroper Flüssigkristall KW - Nematische Phase KW - V-förmige Mesogene KW - brettförmige Mesogene KW - biaxiale Nematogene KW - V-shaped mesogens KW - board-shaped mesogens KW - biaxial nematogens Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155409 ER - TY - THES A1 - Dechant, Moritz Thomas T1 - Synthese und Struktur-Eigenschaftsbeziehungen neuer Phthalocyanin-Sternmesogene – Ein neues Design für organische, flüssigkristalline Photovoltaikmaterialien T1 - Synthesis and structure-property relationships of new phthalocyanine star mesogens - A new design for organic, liquid crystalline photovoltaic materials N2 - Es wurde eine Vielzahl neuer, flüssigkristalliner Phthalocyanin-Sternmesogene synthetisiert. Die Struktur-Eigenschaftsbeziehungen und die thermotropen Eigenschaften neuer Phthalocyanin-Sternmesogene mit Freiraum sowie von sterisch überfrachteten Verbindungen wurden insbesondere hinsichtlich der Freiraumfüllung untersucht. Diesbezüglich wurde ein neuer supramolekularer, freiraumfüllender "Klick-Prozess" zwischen einem Molekül mit Freiraum und einem sterisch überfrachteten Molekül mit vier Fullerenen beobachtet. Die photophysikalischen Eigenschaften wurden zudem insbesondere im Hinblick auf die Anwendung für die Organische Photovoltaik untersucht. N2 - A large number of new, liquid crystalline phthalocyanine star mesogens was synthesized. The structure-property relationships and the thermotropic properties of new phthalocyanine star mesogens with free space and of sterically overcrowded compounds were investigated, whereas the space-filling was of great interest. In this regard, a new supramolecular, space-filling „click-process“ between one molecule with free space and one sterically overcrowded compound with four fullerenes was observed. The photophysical properties regarding to an application for the organic photovoltaics were investigated. KW - Phthalocyanin KW - Fullerene KW - Flüssigkristalle KW - Donor-Akzeptor-Dyaden KW - Sternmesogene KW - Freiraumfüllung KW - Flüssigkristall KW - Fotovoltaik KW - Fulleren Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-238888 ER - TY - THES A1 - Maier, Philipp T1 - Synthese und Struktur-Eigenschafts-Beziehungen sterisch überfrachteter Sternmesogene mit hexasubstituiertem Benzolkern und ihrer Wirt-Gast-Mesogene T1 - Synthesis and structure-property relationships of sterically crowded star mesogens with a hexasubstituted benzene core and their host-guest mesogens N2 - Die vorliegende Dissertation befasst sich mit den Struktur-Eigenschafts-Beziehungen von sternförmigen Mesogenen mit kontrollierbaren Konformationen in den LC-Phasen. Zunächst sollte mithilfe verschiedener Moleküldesigns geklärt werden, wie eine Faltung der Arme verhindert werden kann, und somit, ob sternförmige Konformationen in den kolumnaren Packungen realisiert werden können. Hierzu wurde erfolgreich eine Bibliothek von dreiarmigen Amidsternen, semiflexiblen Oligoestersternen mit hexasubstituiertem Benzolkern und formtreuen hexasubstituierten Benzolen synthetisiert. Die besondere Herausforderung bei der Darstellung letzterer lag in der C3-Symmetrie der Verbindungen und konnte durch Optimierung der Synthesestrategie mittels aufeinander folgender Wittig-Horner- und Suzuki-Reaktionen in einem divergenten Ansatz gemeistert werden. Ein herausragendes Ergebnis ist die Flüssigkristallinität dieser formtreuen hexasubstituierten Strukturen, wenn sie mindestens neun bzw. zwölf periphere Ketten besitzen. Die detaillierte Auswertung der Kolumnendurchmesser mithilfe von äquatorialen Reflexen sowie der Dichte und der meridionalen Beugungsmuster zeigen, dass lediglich für die formtreuen hexasubstituierten Benzolderivate eine Faltung verhindert werden kann. Intrinsische Freiräume (Kävitäten) zwischen den Oligo(phenylenvinylen)-Armen werden durch außergewöhnliche Dimerenbildung und helikale Packung der Moleküle kompensiert. In die Kavitäten der Trispyridylverbindungen können Carbonsäure-funktionalisierte Gäste unter Ausbildung von Wasserstoffbrücken eingelagert werden. Mit zunehmender Gastkonzentration wird die helikale Dimerphase des Wirts kontinuierlich in eine neue kolumnare Phase von monomeren Supermesogenen ohne helikale Struktur umgewandelt. Da die Gäste in den Supermesogenen vollständig von den Oligo(phenylenvinylen)-Armen und den aliphatischen Ketten umschlossen sind, handelt es sich bei der Wirtverbindung erstmals um einen flüssigkristallinen Endorezeptor mit drei Bindungsstellen. Das Sternmesogen mit größeren intrinsischen Freiräumen ermöglicht die Einlagerung von funktionalen Bausteinen wie z.B. Anthracenchromophoren. Aus Untersuchungen mittels Festkörper-NMR- und Fluoreszenzspektroskopie geht hervor, dass sich die Mesophase mit drei Anthracengästen langsam in eine doppelt nanosegregierte Struktur umwandelt, in der intrakolumnar Oligo(phenylenvinylen)-Arme und Anthracene Seite an Seite segregiert stapeln und so segmentierte Kolumnen bilden. Diese Art von doppelter Nanosegregation offenbart das Potential des verwendeten Moleküldesigns im Bezug auf die Entwicklung mesomorpher Multikabelstrukturen. Im Vergleich zu den Supermesogenen weisen die analogen Sternverbindungen mit kovalent gebundenen Pseudogästen um über 100 °C höhere Klärpunkte auf, was unter Berücksichtigung der strukturellen Ähnlichkeit der kolumnaren Phasen und der ähnlichen Mischungsenthalpien in unterschiedlichen Werten der Mischungsentropie begründet liegen muss. Der Vergleich mit einer 1:3-Mischung ohne spezifische Wirt-Gast-Wechselwirkung bestätigt in diesem Zusammenhang den Einfluss der Bindungsart der Gäste auf die Mesophasenstabilität. Die Klärtemperaturen der Sternmesogene lassen sich folglich über die Art der Bindung der Gastmoleküle kontrollieren. Dies ist vor allem für die Orientierung kolumnarer Phasen in dünnen Filmen großer funktionaler Mesogene, die häufig erst bei sehr hohen Temperaturen unter Zersetzung in die isotrope Phase übergehen, interessant. N2 - This dissertation examines the structure-property relationships of star-shaped mesogens with controllable conformations in the LC phases. First it should be clarified by means of different molecular designs, how a folding of the arms can be prevented, and thus, if reliable star-shaped conformations can be realized in the columnar stacks. For this reason, a library of three-armed amide stars, semi-flexible oligoester stars with a hexasubstituted benzene core and shape-persistent hexasubstituted benzenes was successfully synthesized. The particular challenge in the preparation of the latter was the C3-symmetry of the compounds and could be accomplished by optimizing the synthetic strategy using subsequently Wittig-Horner and Suzuki reactions in a divergent route. An outstanding result is the liquid crystallinity of these shape-persistent hexasubstituted structures, if they contain at least nine or twelve peripheral chains. The detailed evaluation of the column diameters, using equatorial reflections, as well as the density and the meridional scattering patterns shows that only the shape-persistent hexasubstituted benzene derivatives can be prevented from folding. Intrinsic free spaces (cavities) between the oligo(phenylenevinylene) arms are compensated by exceptional dimer formation and helical packing of the molecules. Carboxylic acid functionalized guests can be incorporated into the cavities of the trispyridyl compounds by forming hydrogen bonds. Upon increasing the guest concentration the helical dimer phase of the host is continuously converted into a new columnar phase of monomeric supermesogens without a helical structure. Since the guests of the supermesogens are entirely enclosed by the oligo(phenylenevinylene) arms and the aliphatic chains, the host compound is the first liquid crystalline endoreceptor with three binding sites. The star mesogen with larger intrinsic free spaces facilitates the incorporation of functional building blocks such as anthracene chromophores. Investigations by solid state NMR and fluorescence spectroscopy uncovered that the mesophase with three anthracene guests slowly converts into a double nanosegregated structure in which oligo(phenylenevinylene) arms und anthracenes stack side by side and thus form segmented columns. This type of double nanosegregation reveals the potential of the molecular design used with respect to the development of mesomorphic multi cable structures. In comparison to the supermesogens the analog star compounds with covalently bound pseudo guests exhibit more than 100 °C higher clearing points. Considering the structural similarity and the similar mixing enthalpy this must be due to different values of the mixing entropy. In this context, the comparison with a 1:3 mixture without any specific host-guest interaction confirms the influence of the binding mode of the guests on the mesophase stability. As a consequence, the clearing temperatures of the star mesogens can be controlled by the binding mode of the guest molecules. This is particularly interesting for the orientation of columnar phases in thin films of large functional mesogens which frequently transform into the isotropic phase at very high temperatures under decomposition. KW - Thermotroper Flüssigkristall KW - Columnare Phase KW - Supramolekül KW - Sternmesogen KW - Endorezeptor KW - Wirt-Gast-Mesogen KW - Nanosegregation KW - Raumfüllung KW - star mesogen KW - endoreceptor KW - host-guest mesogen KW - nanosegregation KW - space filling KW - Mesogen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-185274 ER - TY - THES A1 - Wachtler, Stefan T1 - Synthese und Charakterisierung von funktionalisierten Nanodiamantmaterialien für biomedizinische Anwendungen T1 - Synthesis and characterization of functionalized nanodiamond particles for biomedical applications N2 - In dieser Arbeit ist die Synthese von funktionalisiertem Nanodiamant mit bioaktiven Substanzen, welche vor allem als Wirkstofftransporter eingesetzt werden sollen, beschrieben. Dazu werden zum einen bereits bekannte Anbindungsmöglichkeiten an Nanodiamant, wie zum Beispiel die Klick-Reaktion, sowie die Ausbildung von Amidbrücken verwendet. Zum anderen werden neuartige Funktionalisierungsmöglichkeiten wie Protein Ligation und Thioharnstoffbrücken verwendet und somit das Repertoire an bekannten Anbindungsreaktion erweitert. Des weiteren wurde ein multifunktionales Nanodiamantsystem synthetisiert. Dieses ist in der Lage, zwei verschiedene Moleküle auf einem Partikel zu immobilisieren. Die verwendeten Methoden ermöglichen die Anbindung verschiedener Substanzen aus unterschiedlichen Molekülgruppen an Nanodiamanten und sind somit universell einsetzbar. N2 - Because of its unique physical and chemical properties, nanodiamond can be used in a variety of scientific fields, such as in medical and biological research. In this thesis, new ways to covalently bind substances to the nanodiamond surface have been explored, which also can be used in biological systems. ... KW - Synthesediamant KW - Funktionalisierung KW - Fluoreszenz KW - Krebs KW - nanodiamond KW - Nanodiamant Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-210757 ER - TY - THES A1 - Gloza, Steffi T1 - Synthese und Charakterisierung von Anthracen- und Anthrachinon-substituierten sternförmigen Mesogenen T1 - Synthesis and Characterisation of Anthracene- and Anthraquinone-Substituted Star-Shaped Mesogens N2 - Im Rahmen der vorliegenden Arbeit wurden promesogene Arme sowie eine Bibliothek von Sternmesogenen mit Anthracen als Donor- und Anthrachinon als Akzeptorbaustein synthetisiert und untersucht. Ein Schwerpunkt der Arbeit lag auf der Synthese, dem Upscaling, der selektiven Schützung und weiteren Umsetzung der 2,6-substituierten Anthracen- und Anthrachinon-Chromophore zu den Armbausteinen. Besondere Herausforderungen ergaben sich nicht nur in der Entwicklung einer effizienten Synthesestrategie zur Gewinnung der Chromophore, sondern auch in der Wahl geeigneter Schutzgruppen. Die sternförmigen Verbindungen, die im Rahmen der vorliegenden Arbeit präpariert wurden, enthalten 1,3,5-Trihydroxybenzen (Phloroglucin) als Kerneinheit und sind Multiarmmesogene mit der kleinstmöglichen Zahl an Armen. Durch geeignete Schutzgruppenstrategien gelang neben den C3-symmetrischen Verbindungen die gezielte Darstellung der C2-symmetrischen und unsymmetrischen Verbindungen. Die Gesamtausbeuten der semiperfluorierten Verbindungen fallen deutlich geringer aus als die der ausschließlich mit Alkylketten dekorierten Derivate, da ihre Isolierung sehr anspruchsvoll ist. Alle Verbindungen bilden ausnahmslos kolumnare Phasen. Semiperfluorierte Ketten wurden eingeführt, um eine Trennung des Donors Anthracen und des Akzeptors Anthrachinon zu erreichen. Die Kolumnendurchmesser sind bei allen kolumnaren Mesophasen wesentlich kleiner als die Durchmesser der sternförmigen Konformere der Mesogene. Angelehnt an die früher untersuchten Oligobenzoatsterne werden Modelle mit gefalteten, E-förmigen Konformeren aufgestellt. So ist es möglich, die erforderliche Anzahl an Molekülen pro Elementarzelle in einer dichten, nanosegregierten Packung anzuordnen. Mit Absorptions- und Emissionsmessungen konnte dieses Modell bestätigt werden. In allen Donor- und Akzeptor-substituierten Verbindungen wird die Fluoreszenz durch Energietransferprozesse nach Förster und Dexter fast vollständig gelöscht. Restfluoreszenz wird in dem Bereich beobachtet, der nur noch den Transfer nach Dexter zulässt und ist für die Derivate am höchsten, die in den E-förmigen Konformeren Donor und Akzeptor am besten trennen können. Die Ergebnisse dieser Arbeit zeigen, dass Anthracen- und Anthrachinonderivate eine Vielzahl komplexer zwei- und dreidimensional hochgeordneter kolumnarer Strukturen ausbilden und damit hochinteressant sind als flüssigkristalline organische Halbleitermaterialien. N2 - As part of this work promesogenic arms and a library of star-shaped mesogens with anthracene as electron donor and anthraquinone as electron acceptor unit were synthesised and characterised. The work focused first on synthesis, upscaling, selective protection and further implementation of 2,6-substituted anthracene and anthraquinone chromophores to arm derivatives. The development of an efficient synthetic strategy, but also the selection of appropriate protecting groups was particular challenging. The star-shaped molecules prepared in this work contain 1,3,5-trihydroxybenzene (Phloroglucinol) as core unit and are multiarm mesogens with the smallest possible number of arms. In addition to the synthesis of the C3-symmetrical, suitable protecting group strategies led to selective preparation of the C2-symmetrical and unsymmetrical compounds. All over yields of semiperfluorinated compounds are significant lower compared to the alkyl chain derivatives, owing to the much more demanding work-up. The liquid crystalline properties of all star-shaped target compounds were analyzed. Without exception – all materials form columnar mesophases. Semiperfluorinated chains were used to nanosegregate the donor anthracene and the acceptor anthraquinone. Column diameters of all columnar mesophases are much smaller than the diameters of star-shaped conformers of the mesogens. According to previous investigations of oligobenzoate stars, models with folded, E-shaped conformers have been suggested. This way it is possible to arrange the required number of molecules in a dense, nanosegregated structure. This model could be confirmed by absorption und emission spectroscopy. For all donor and acceptor substituted compounds fluorescence is almost completely quenched by energy transfer processes according to Förster and Dexter. Residual fluorescence, which is only observed in the range of Dexter transfer, is highest for molecules in which donor and acceptor in the E-shaped conformer possess a high probability to be separated in the columnar stacks. The results of this work show anthracene and anthraquinone derivatives forming a number of complex two- and three-dimensional high-ordered columnar structures and thus are highly interesting for liquid crystalline organic semiconducting materials. KW - Flüssigkristall KW - Columnare Phase KW - Anthracenderivate KW - Anthrachinonderivate KW - Sternmesogene Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-110595 ER - TY - THES A1 - Bahndorf, Katrin T1 - Synthese und Charakterisierung von Aminosäure-basierten Amphiphilen und deren Umsetzung zu C\(_3\)-symmetrischen Sternmesogenen - Strukturkontrolle in weicher Materie über Oligopeptidaggregation T1 - Synthesis and characterization of amino-acid based amphiphiles and their conversion to C\(_3\)-symmetric star mesogens - structure control in soft matter via oligopeptide aggregation N2 - Synthese einer Bibliothek von Aminosäure-basierten Oligopeptid-Amphiphilen mittels Festphasensynthese, deren kovalente Knüpfung an einen nukleophilen Kern zu C3-symmetrischen Sternmesogenen und die Analyse der Einflüsse der verwendeten Aminosäuren auf die Sekundärstruktur des synthetisierten Moleküls. N2 - Synthesis of a library of amino acid based oligopeptide amphiphiles by solid phase synthesis, their covalent linkage to a nucleophilic core to form C3-symmetrical star mesogens and the analysis of the influences of the used amino acids on the secondary structure of the synthesized molecule. KW - Organische Chemie KW - Flüssigkristalle KW - Festphasenpeptidsynthese KW - Aminosäuren KW - Organic Chemistry KW - Liquid Crystals KW - Solid Phase Peptide Synthesis KW - Amino Acids Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252753 ER -