TY - THES A1 - Buschmann, Peter T1 - Anbindung von Katalysatoren an Nanodiamantpartikel mit Hilfe starrer Linker T1 - Immobilisation of catalysts on nanodiamond particles using rigid linkers N2 - Das Ziel dieser Arbeit war die Herstellung von Diamantmaterialien, deren Oberflächen mit Alkinen, Aziden oder Aldehyden modifiziert waren. Diese funktionellen Gruppen sollten die einfache Anbindung verschiedener katalytisch aktiver Systeme mit Hilfe der 1,3-dipolaren Cycloaddition nach Huisgen bzw. Iminbildung ermgöglich. Da in einer vorangegangenen Arbeit Hinweise darauf gefunden wurde, dass die hochgradig funktionalisierte Oberfläche von Detonationsnanodiamant dazu in der Lage ist, die Aktivität von immobilisierten Katalysatoren zu behindern. Darum wurde in dieser Arbeit verglichen, ob die Verwendung von starren Linkern auf Tolanbasis einen Vorteil gegenüber ihren flexiblen Gegenstücken liefert. Dazu wurde für jede der oben genannten Funktionalisierungsarten je ein Diamantmaterial mit flexibler sowie mindestens eines mit unbiegsamer Verbindungseinheit hergestellt und getestet. Dadurch konnte das Konzept der starren Linker für Enzyme bestätigt werden und es wurde eine signifikant höhere Aktivität erhalten, als wenn flexible Anbindungsbrücken verwendet wurden. Bei Organokatalysatoren und metallorganischen Systemen konnten jedoch keine erfolgreichen Katalysen durchgeführt werden. N2 - The aim of this work was the production of diamond materials whose surfaces were modified either with alkynes, azides, or aldehydes. These functional groups were supposed to allow the simple immobilisation of catalytically active systems via 1,3-dipolar cycloadditions or imine formation, respectively. In a previous publication, it was found that the highly functionalised surface of detonation nanodiamond can reduce the activity of immobilised catalysts. In this work, it was therefore investigated whether the use of rigid linkers based on tolane derivatives would be advantageous when compared to their flexible counterparts. For this purpose, at least one example for both cases was produced for each of the above mentioned functional groups. Test results showed that the concept of the rigid linkers was successful for the immobilisation of enzymes, for which a significantly higher activity was detected when compared to flexible linkers. However, for organocatalysts and metal organic systems successful catalysis was not achieved. KW - Nanopartikel KW - Diamant KW - Dipolare Cycloaddition KW - Immobilisiertes Enzym KW - Organokatalyse KW - Katalysatorimmobilisierung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-132966 ER - TY - THES A1 - Muzha, Andreas T1 - Herstellung und Charakterisierung kolloidaler Lösungen diamantbasierter und verwandter Materialien T1 - Preparation and characterization of colloidal solutions of diamond-based and related materials N2 - In der vorliegenden Publikation wurden stabile kolloidale Lösungen aus CVD-Diamant, Detonationsdiamant sowie artverwandten Materialien hergestellt und charakterisiert Besonderes Augenmerk wurde bei der Zerkleinerung von CVD Diamant daraufgelegt, dass die nanoskaligen Partikel ihre materialspezifischen Eigenschaften auch bei Reduktion der Größe beibehalten. Systematisch wurde die Zerkleinerung in einer Planetenmühle analysiert. Es wurde sowohl die minimal erreichbare Partikelgröße, als auch die Menge an erzeugtem, nanoskaligem Material bewertet. Um die Vermahlung zu verbessern, wurden die Geschwindigkeit der Mühle, die Größe der Mahlkörper, die Dauer der Vermahlung, sowie die eingesetzten Lösemittel variiert. Des Weiteren konnten durch die Vermahlung unterschiedlich hergestellter CVD Diamantfilme in einer Vibrationsmühle die Einflüsse von Schichtdicke und Korngröße der Diamantkristalle untersucht werden. Durch Bearbeitung von Detonationsdiamanten und Kohlenstoffnanozwiebeln wurden stabile kolloidale Lösungen hergestellt, mit Partikelgrößen im unteren Nanometerbereich. Diese sind im alkalischen pH-Bereich stabil sein, hierfür wurde durch Luft und Säureoxidation oxidierter Detonationsdiamant und oxidierte Kohlenstoffnanozwiebeln hergestellt. Mithilfe der thermogravimetrischen Analyse und Infrarotspektroskopie wurde die hierfür optimale Temperatur und Dauer bestimmt. N2 - In the present publication, stable colloidal solutions of CVD diamond, detonation diamond and related materials were produced and characterized. During the grinding of CVD diamond, special attention was paid to ensuring that the nanoscale particles retain their material-specific properties even when their size is reduced. The grinding in a planetary mill was analyzed systematically. Both the minimum achievable particle size and the amount of nanoscale material produced were evaluated. In order to improve the grinding, the speed of the mill, the size of the grinding media, the duration of the grinding and the solvents used were varied. Furthermore, the influences of layer thickness and grain size of the diamond crystals could be investigated by grinding differently produced CVD diamond films in a vibration mill. Stable colloidal solutions were prepared from detonation diamonds and carbon nano onions, with particle sizes in the sub-nanometer range. These are stable in alkaline pH range. For this purpose oxidized detonation diamond and oxidized carbon nano onions were modified by air and acid oxidation. The optimum temperature and duration for this was determined with the aid of thermogravimetric analysis and infrared spectroscopy. KW - Diamant KW - Kolloid / Lösung KW - Detonationsdiamant KW - CVD-Diamant KW - Kohlenstoffnanozwiebel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-296685 ER -