TY - THES A1 - Müller, Kerstin T1 - Einzelmolekül- und Ensemble-Fluoreszenzstudien an funktionalisierten, halbleitenden Kohlenstoffnanoröhren T1 - Single molecule and ensemble fluorescence studies on functionalized, semiconducting carbon nanotubes N2 - Ziel dieser Dissertation war es zu einem besseren Verständnis hinsichtlich folgender Themen beizutragen und Möglichkeiten aufzuzeigen, mit welchen die Voraussetzungen für Anwendungen von einzelnen, funktionalisierten Kohlenstoffnanoröhren, wie u.a. Einzelphotonenquellen, erfüllt werden können. Eine wesentliche Voraussetzung für die Funktionalisierung von einzelnen Kohlenstoffnanoröhren ist zunächst eine Probenpräparation, welche SWNT-Suspensionen mit einem hohen Anteil an vereinzelten SWNTs hoher PL-Intensität bereitstellen kann. Um solche SWNT-Suspensionen herstellen zu können, wurden drei verschiedene Rohmaterialien und Dispergiermittel auf deren Entbündelungseffizienz- und relativer Photolumineszenzquantenausbeute untersucht. Anhand von photolumineszenzspektroskopischen Untersuchungen und Messungen der Extinktion stellte sich heraus, dass in Kombination des unaufbereiteten CVD-Kohlenstoffnanorohrrußes mit dem Copolymer PFO:BPy als Dispergiermittel und einem speziell in dieser Dissertation entwickelten Herstellungsverfahren für die Mikroskopieproben, stabile (6,5)-SWNT-Suspensionen mit einem großen Anteil an einzelnen SWNTs hoher PL-Intensität, hergestellt werden können. Letztere Suspension diente als Ausgangsmaterial für die, in dieser Dissertation neuartige, entwickelte Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten mittels PL- und Ramanmessungen an einem PL-Mikroskopie-Aufbau, welche eine weitere Voraussetzung für Einzelpartikelstudien darstellt. Hierbei wurden im Rahmen einer statistischen Messreihe PL- und Ramanspektren von 150 SWNT-Objekten aufgenommen und hieraus resultierend die Parameter FWHM, Energie des S1-Emissions-Zustands und relative Photolumineszenzquantenausbeute ermittelt. Schließlich konnten die zwischen einer einzelnen SWNT und einem Aggregat charakteristischen Differenzen anhand der Korrelationen zwischen den drei Parametern dargestellt werden. Zudem erfolgte eine statistische Analyse zur Bestimmung der statistischen Signifikanz dieser Korrelationen. Hierbei wurde anhand der nicht-parametrischen Spearman-Korrelationskoeffizienten und der p-Werte gezeigt, dass in Kombination dieser drei Messparameter mit einer hohen Wahrscheinlichkeit zwischen einer einzelnen SWNT und einem Aggregat differenziert werden kann. Demnach konnte eine neuartige, im Vergleich zur Literatur, praktikable Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten, etabliert werden, welche die Voraussetzung für Einzelrohrstudien ist. Der Fokus dieser Dissertation ist die Entschlüsselung der Reaktionsmechanismen der Arylierung und reduktiven Alkylierung von (6,5)-SWNTs im Ensemble und auf Einzelrohrbasis. Durch diese kovalenten Funktionalisierungsverfahren entstehen neue fluoreszierende Defekt-Zustände, deren zeitabhängiges Intensitätsverhalten in der vorliegenden Arbeit näher untersucht wurde. Hinsichtlich der Arylierung von SWNTs mit Diazoniumsalzen postulieren Studien einen zweistufigen Reaktionsmechanismus, welcher durch eine kombinatorische, spektroskopische Gesamtbetrachtung im Rahmen dieser Dissertation bestätigt werden konnte. Auch konnte erstmalig in der Literatur gezeigt werden, dass die Reaktion in hohem Maße reproduzierbar ist. Reproduzierbarkeitsstudien wurden auch im Falle der reduktiven Alkylierung unternommen, wobei erstmalig festgestellt wurde, dass diese Reaktion lediglich im hohen Maße reproduzierbar ist, sofern die Reduktionslösung mindestens 17 Stunden vor Reaktionsstart angesetzt wird. Basierend auf diesem Resultat, wurden reproduzierbare Messreihen zur Untersuchung der Reaktionsbedingungen und des Reaktionsmechanismus unternommen, da diesbezüglich unzureichend Kenntnis in der Literatur vorhanden ist. Zur Klärung des Reaktionsmechanismus, von welchem lediglich Annahmen existieren, wurde zum einen der Einfluss der Laseranregung auf die Reaktion untersucht. Da lediglich für den Falle des Ansetzens der Reduktionslösung unmittelbar vor Messbeginn, wobei die reaktiven SO2- -Radikale erzeugt werden, ein Einfluss der Laseranregung festgestellt werden konnte, nicht jedoch im weiteren Reaktionsverlauf, ist von keiner radikalischen Reaktion im Funktionalisierungsschritt auszugehen. Dies konnte durch den Einsatz von Konstitutionsisomeren des Iodbutans bestätigt werden, wobei das Iodbutanisomer, welches im Fall einer radikalischen Reaktion die höchste Reaktivität zeigen sollte, zu keiner Funktionalisierung der SWNTs führte. Im Gegensatz hierzu, konnte durch das 1-Iodbutan, mit dem primären C-Atom, eine hohe PL-Intensität der defekt-induzierten Zustände E11- und T- verzeichnet werden, was die weitere Annahme einer SN2-Reaktion stützt. Im Rahmen dieser Dissertation konnte zudem erstmalig entdeckt werden, dass unter deren alkalischen, reduktiven Bedingungen, eine Funktionalisierung mit Acetonitril erfolgen kann, was durch die Durchstimmung der PL-Intensität des Defektzustands bei Variation des Volumenanteils von Acetonitril bestätigt werden konnte. Hierbei gilt es jedoch weiter zu analysieren, auf welche Art die Koordination bzw. Funktionalisierung von Acetonitril an den SWNTs erfolgt, was u.a. durch Ramanmessungen untersucht werden könnte. Auch konnten neuartige Kenntnisse bezüglich der Reaktionskinetik basierend auf den Studien dieser Dissertation erhalten werden, wobei festgestellt wurde, dass das Reaktionsprofil mit dem einer komplexen Folgereaktion angenähert werden kann. Zudem konnten neuartige Kenntnisse aus der Thermodynamik, wie die Ermittlung der Aktivierungsenergie der Adsorption von DOC-Molekülen auf der SWNT-Oberfläche, durch die Zugabe des Tensids DOC zum Reaktionsansatz und dem hieraus resultierenden Reaktionsabbruch, erhalten werden. Schließlich fand eine Übertragung der Ergebnisse aus den Ensemblestudien der reduktiven Alkylierung auf Einzelpartikeluntersuchungen statt, wobei letztere erstmalig im Rahmen dieser Arbeit durchgeführt wurden. Aus der statistischen Analyse, welche von Martina Wederhake durchgeführt wurde, resultierte durch Erhöhung des Stoffmengenverhältnisses von 1-Iodbutan zu Kohlenstoff eine inhomogene Steigerung des Funktionalisierungsgrades. Ausblickend gilt es nun zu prüfen, ob die zeitlichen Reaktionsverläufe der photolumineszierenden Zustände, welche aus den Ensemble-Studien erhalten wurden, auf Einzelrohrbasis reproduziert werden können. Es lässt sich demnach festhalten, dass mithilfe der Studien dieser Dissertation ein Probenherstellungsverfahren, welches stabile SWNT-Suspensionen mit einem großen Anteil an einzelnen Kohlenstoffnanoröhren, hoher PL-Intensität ermöglicht, etabliert werden konnte. Zudem wurde eine neuartige, praktikable und statistisch signifikante Methodik zur Differenzierung zwischen einzelnen Kohlenstoffnanoröhren und Aggregaten entwickelt. Schließlich konnten neue, essentielle Informationen bezüglich des Reaktionsmechanismus und den Reaktionsbedingungen der Arylierung und reduktiven Alkylierung von halbleitenden (6,5)-SWNTs erhalten werden. Wie in der Einleitung bereits erwähnt, sind sowohl der Erhalt einer stabilen SWNT-Suspension mit einem großen Anteil an einzelnen Nanoröhren hoher PL-Intensität, die Möglichkeit der Identifizierung einzelner SWNTs, als auch ein ausgiebiges Verständnis der Reaktionsmechanismen der Funktionalisierungsreaktionen, essentielle Voraussetzungen für die Verwirklichung von Einzelphotonenquellen auf Basis einzelner, funktionalisierter Kohlenstoffnanoröhren. Diese können aufgrund derer geeigneter Emissionseigenschaften als vielversprechende Kandidaten für das Ausgangsmaterial von Einzelphotonenquellen in der Quanteninformationstechnologie angesehen werden. N2 - The motivation of the present thesis was to obtain a better understanding considering the following topics and to show possibilities with the aid of which the requirements for the realization of applications based on single functionalized carbon nanotubes, e.g. single-photon-sources, can be fullfilled. For single-particle studies a SWNT suspension with a high amount of individual and bright carbon nanotubes is needed. Therefore different carbon nanotube soots and dispersing agents were used to determine the unbundling efficiency and relative photoluminescence quantum yield of the resulting suspensions. It turned out that by using the homemade CVD soot with the copolymer PFO:BPy as the dispersing agent and by means of a special developed preparation method of the microscope samples, stabilized SWNT suspensions with a huge amount of individualzed SWNTs with a high PL-intensity could be obtained. Consequently based on this thesis a practically new method was developped by using photoluminescence and raman microscopy. As the source material of this study, the mentioned suspension resulting from CVD soot and PFO:BPy was used. In this context pl and raman spectra of 150 SWNT objects were taken and the parameter FWHM, energy of the first exzitonic subband S1 of the pl spectra and the relative photoluminescence quantum yield were obtained. The characteristical trends concerning the optical properties of aggregates and individual carbon nanotubes could be observed by means of the correlations between the three parameters. However, the standard deviations of the results were quite high, for which reason a statistical analysis has been done to proove the statistical significance of the data. Hereby the non-parametric spearman correlation coefficients and the p-values were determined. It turned out that by the combination of this three parameters one could distinguish with a high probability individual SWNT from aggregates which is the requirement for single-particle studies. As mentioned at the beginning of this work the main aim of this thesis was to get a better understanding of the reaction mechanism and conditions of the arylation and reductive alkylation on (6,5)-SWNTs in solution and on single-particle level. As a result of this functionalization reactions new fluorescent defect-states are formed whose time-dependent intensity behaviour is analyzed among this thesis. Concerning the arylation of SWNTs with diazonium salts a two-step radical chain mechanism is assumed which could be confirmed by viewing the reaction in its spectroscopic entirety during this thesis. Finally it turned out that the arylation of swnts as it is done in this work is highly reproducible. Studies on the reproducibility also have been done for the case of the reductive alkylation. It has become clear that it is very important to prepare the alkaline solution of the reducing agent sodium dithionite at least 17 hours before measurement. Based on this result, reproducible measurements were done to anazyle the reaction conditions and mechanism, as the reaction is not well understood yet in literature. To get a better insight into the reaction mechanism of the redutive alkylation the influence of the laser excitation was studied. It turned out that just in case for the reaction run whereby the sodium dithionit solution was prepared immediately before the measurement, a dependence on the pl intensity of the defect state from laser excitation could be oberved. This is explained by the stepe where the SO2- -radicals are generated. As there is no dependency in the further reaction process no radical reactions are present in the reductive alkylation. This observation could be confirmed by the use of iodobutane constitution isomers as they have the contrary reaction reactivities for the radical and the SN2 pathway. It turned out that the primary 1-iodobutane shows the highest reactivity by the presence of an intensive defect state in the pl spectra, whereby no defect state could be generated by means of the tertiary 2-iodo-2-methylpropane. Therefore it is likely that the reductive alkylation runs via the SN2 pathway. Besides by means of this thesis it could be observed for the first time, that under these reductive conditions, acetonitrile is also available to functionalize the SWNTs even in the absence of haloalkanes. This could be confirmed with the tuning of the defect induced pl intensity by a varying ratio of the volumina of acetonitrile. However, the way how acetonitrile functionalizes the SWNTs must be analyzed in further experiments. This could be done by raman measurements. Additionaly new results concerning the reaction's kinetic could be obtained by the studies during this thesis, as the time dependent behaviour of the defect induced pl intensity is similiar to a complexe consecutive reaction and the reaction's rates are proportional to the amount of functionalization agent. To get new information about the thermodynamics of the reaction, DOC was added to abort the reaction. Due to an exchange of the SDS and unreactive molecules of acetonitrle and 1-iodobutane by DOC on the SWNT-surface adsorption isotherms could be observed with the start of the DOC addition and the saturation of the pl intensity of the defect state E11-. Finally the results of the ensemble studies of the reductive alkylation were transferred to the single-particle level to get information about the distribution of the defect centers on the individual SWNT. By means of a statistical analysis which has been done by Martina Wederhake an inhomogeneous distribution of sp3 defect centers on the SWNT surface was obtained as the amount of the functionalization agent was enhanced. For the future, it should be examined if the time-dependent behaviour of the fluorescent states can be reproduced on single carbon nanotoubes. It can thus be concluded that by means of this thesis a procedure which enables stabilized SWNT suspensions with a huge amount of single SWNTs with a high pl-intensity could be established. Besides a new practically and statistical significant method for the differentiation between individual SWNTs and aggregates could be developped. Finally important information concerning the reaction mechanisms and reaction conditions of the arylation and reductive alkylation on semiconducting (6,5)-single wall carbon nanotubes could be obtained. As mentioned at the beginning of the thesis in the introduction a SWNT suspension with a huge amount of single SWNTs with a high pl-intensity, the possiblity to identify individualized SWNTs and a deep understanding of the functionalization reactions are essential requirements for the realization of single photon sources based on functionalized carbon nanotubes. Latter ones are promising candidates for the source material of single-photon sources in quantum information technology due to their suited emission properties. KW - Einwandige Kohlenstoff-Nanoröhre KW - Funktionalisierung KW - Spektroskopie KW - Einzelmolekülmikroskopie KW - Photolumineszenz KW - kovalente Funktionalisierung KW - covalent functionalization KW - reduktive Alkylierung KW - reductive alkylation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-209942 ER - TY - THES A1 - Auth, Michael Tilman T1 - Quantitative Electron Paramagnetic Resonance Studies of Charge Transfer in Organic Semiconductors T1 - Quantitative Elektron Paramagnetische Resonanz Untersuchungen von Ladungstransfer Prozessen in Organischen Halbleitern N2 - In the present work we investigated various charge transfer processes, as they appear in the versatile world of organic semiconductors by probing the spin states of the corresponding charge carrier species via electron paramagnetic resonance (EPR) spectroscopy. All studied material systems are carbon-based compounds, either belonging to the group of polymers, fullerenes, or single-wall carbon nanotubes (SWNTs). In the first instance, we addressed the change of the open circuit voltage (Voc) with the fullerene blend stoichiometry in fullerene-based solar cells for organic photovoltaics (OPV). The voltage depends strongly on the energy separation between the lowest unoccupied molecular orbital (LUMO) of the donor and the highest occupied molecular orbital (HOMO) of the acceptor. By exploiting the Gaussian distribution of the charge carriers in a two-level system, and thus also their spins in the EPR experiment, it could be shown that the LUMOs get closer by a few to a few hundred meV when going from pure fullerene materials to a fullerene mixture. The reason for this strong energetic effect is likely the formation of a fullerene alloy. Further, we investigated the chemical doping mechanism of SWNTs with a (6,5)-chirality and their behaviour under optical excitation. In order to determine the unintentional (pre)-doping of SWNTs, EPR spectra of the raw material as well as after different purification steps were recorded. This facilitated the determination of nanotube defects and atmospheric p-doping as the causes of the measured EPR signals. In order to deliberately transfer additional charge carriers to the nanotubes, we added the redox-active substance AuCl3 where we determined an associated doping-yield of (1.5±0.2)%. In addition, a statistical occupation model was developed which can be used to simulate the distribution of EPR active, i.e. unpaired and localised charge carriers on the nanotubes. Finally, we investigated the charge transfer behaviour of (6,5)-SWNTs together with the polymer P3HT and the fullerene PC60BM after optical excitation. N2 - Die vorliegende Arbeit untersuchte mit Hilfe der Elektron Paramagnetischen Resonanz Spektroskopie (EPR) die Ladungsträgerspins bei Ladungstransfer-Prozessen in organischen Halbleitern. Insbesondere wurden hier verschiedene Kohlenstoffverbindungen betrachtet, welche zur Gruppe der Polymere, Fullerene, oder Kohlenstoff-Nanoröhren gehören. Zu Beginn gingen wir auf die Veränderung der Leerlaufspannung in Fulleren Solarzellen für organische photovoltaic (OPV) ein, welche mit der Fulleren Stöchiometry variiert. Die Leerlaufspannung ist entscheidend für das Ladungsstransfer-Verhalten nach erfolgreicher optischer Anregung. Sie hängt stark vom Energieabstand des niedrigsten unbesetzten Molekülorbitals (engl. LUMO) des Donators zum höchsten besetzten Molekülorbital (engl. HOMO) des Akzeptors ab. Hierbei wurde die Gaußsche Verteilungs-Statistik der Ladungsträger, und damit auch deren Spins, in einem zwei Niveau System im EPR Experiment ausgenutzt. Es konnte gezeigt werden, dass sich deren Abstand um wenige bis hin zu wenigen Hundert meV annähert wenn man vom reinen Fulleren Material zu einem Fulleren Gemisch übergeht. Die Ursache für diesen starken energetischen Effekt ist wahrscheinlich die Bildung einer Fulleren-Legierung. Des weiteren betrachteten wir speziell einwandige Kohlenstoff-Nanoröhren der Chiralität (6,5). Untersucht wurde zunächst die chemische Dotierung dieser Systeme und anschließend ihr Verhalten bei optischer Anregung. Um zunächst die ungewünschte (vor)-Dotierung der Nanoröhren zu ermitteln, wurden EPR Spektren in unbehandelter Form, als auch nach unterschiedlichen Aufreinigungsschritten aufgenommen. Dies ermöglichte die Bestimmung von Nanorohr-Defekten und atmosphärischer p-Dotierung als Ursache für das gemessene EPR Signal. Um bewusst zusätzliche Ladungsträger auf die Nanoröhren zu übertragen gaben wir die redox-aktive Substanz AuCl3 hinzu, wo wir eine zugehörige Dotiereffizienz von (1,5±0,2)% ermittelten. Darüber hinaus wurde ein statistisches Modell erarbeitet welches die Verteilung von EPR aktiven, d.h. ungepaarten und lokalisierten Ladungsträgern auf den Nanoröhren simulieren kann. Zum Abschluss betrachteten wir das Ladungstransfer-Verhalten von (6,5)-Nanoröhren zusammen mit dem Polymer P3HT und dem Fulleren PC60BM nach optischer Anregung. KW - Organische Halbleiter KW - EPR Spektroskopie KW - Dotierung KW - Ladungstransfer KW - organic semiconductor KW - carbon nanotube KW - epr spectroskopy KW - doping KW - quantitative epr KW - charge transfer KW - organic photovoltaic KW - spin Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-189513 ER - TY - THES A1 - Kastner, Matthias J. T1 - Spectroscopic investigation of molecular adsorption and desorption from individual single-wall carbon nanotubes T1 - Spektroskopische Untersuchung von molekularer Adsorption und Desorption an einzelnen einwandigen Kohlenstoffnanoröhren N2 - Nanoelectronics is an essential technology for down-scaling beyond the limit of silicon-based electronics. Single-Wall Carbon Nanotubes (SWNT) are semiconducting components that exhibit a large variety of properties that make them usable for sensing, telecommunication, or computational tasks. Due to their high surface to volume ratio, carbon nanotubes are strongly affected by molecular adsorptions, and almost all properties depend on surface adsorption. SWNT with smaller diameters (0.7-0.9nm) show a stronger sensitivity to surface effects. An optimized synthesis route was developed to produce these nanotubes directly. They were produced with a clean surface, high quality, and large lengths of 2 μ m. The results complement previous studies on larger diameters (0.9-1.4nm). They allow performing statistically significant assumptions for a perfect nanotube, which is selected from a subset of nanotubes with good emission intensity, and high mechanical durability. The adsorption of molecules on the surface of carbon nanotubes influences the motion and binding strength of chargeseparated states in this system. To gain insight into the adsorption processes on the surface with a minimum of concurrent overlapping effects, a microscopic setup, and a measurement technique were developed. The system was estimated to exhibit excellent properties like long exciton diffusion lengths (>350nm), and big exciton sizes (8.5(5)nm), which was substantiated by a simulation. We studied the adsorption processes at the surface of Single-Wall Carbon Nanotubes for molecules in the gas phase, solvent molecules, and surfactant molecules. The experiments were all carried out on suspended individualized carbon nanotubes on a silicon wafer substrate. The experiments in the gas-phase showed that the excitonic emission energy and intensity experiences a rapid blue shift during observation. This shift was associated with the spontaneous desorption of large clusters of gaseous molecules caused by laser heat up. The measurement of this desorption was essential for creating a reference to an initially clean surface and allows us to perform a comparison with previous measurements on this topic. Furthermore, the adsorption of hydrogen on the nanotube surface at high temperatures was investigated. It was found that a new emission mode arises slightly red-shifted to the excitonic emission in these systems. The new signal is almost equally strong as the main excitonic peak and was associated with the brightening of dark excitons at sp3-defects through a K-phonon assisted pathway. The finding is useful for the direct synthesis of spintronic devices as these systems are known to act as single-photon emitters. The suspended nanotubes were further studied to estimate the effect of solvent adsorption on the excitonic states during nanotube dispersion for each nanotube individually. A significant quantum yield loss is observable for hexane and acetonitrile, while the emission intensity was found to be the strongest in toluene. The reference to a clean surface allowed us to estimate the exact influence of the dielectric environment of adsorbing solvents on the excitonic emission energy. Solvent adsorption was found to lead to an energy shift that is almost twice as high as suggested in previous studies. The amount of this energy shift, however, was comparably similar for all solvents, which suggests that the influence of the distinct dielectric constant in the outer environment less significantly influences the energy shift than previously thought. An interesting phenomenon was found when using acetonitrile as a solvent, which leads to greatly enhanced emission properties. The emission is more than twice as high as in the same air-suspended nanotubes, which suggests a process that depends on the laser intensity. In this study, it was reasonably explained how an energy down-conversion is possible through the coupling of the excitonic states with solvent vibrations. The strength of this coupling, however, also suggests adsorptions to the inside of the tubular nanotube structure leading to a coupled vibration of linear acetonitrile molecules that are adsorbed to the inner surface. The findings are important for the field of nanofluidics and provide an excellent system for efficient energy down-conversion in the transmission window of biological tissue. Having separated the pure effect of solvent adsorption allowed us to study the undisturbed molecular adsorption of polymers in these systems. The addition of polyfluorene polymer leads to a slow but stepwise intensity increase. The intensity increase is overlapping with a concurrent process that leads to an intensity decrease. Unfortunately, observing the stepwise process has a low spacial resolution of only 100-250nm, which is in the range of the exciton diffusion length in these systems and hinders detailed analysis. The two competing and overlapping processes processes are considered to originate from slow π-stacking and fast side-chain binding. Insights into this process are essential for selecting suitably formed polymers. However, the findings also emphasize the importance of solvent selection during nanotube dispersion since solvent effects were proven to be far more critical on the quantum yield in these systems. These measurements can shed light on the ongoing debate on polymers adsorption during nanotube individualization and allow us to direct the discussion more towards the selection of suitable solvents. This work provides fundamental insights into the adsorption of various molecules on the surface of individually observed suspended Single-Wall Carbon Nanotubes. It allows observing the adsorption of individual molecules below the optical limit in the solid, liquid, and gas phases. Nanotubes are able to act as sensing material for detecting changes in their direct surrounding. These fundamental findings are also crucial for increasing the quantum yield of solvent-dispersed nanotubes. They can provide better light-harvesting systems for microscopy in biological tissue and set the base for a more efficient telecommunication infrastructure with nano-scale spintronics devices and lasing components. The newly discovered solvent alignment in the nanotube surrounding can potentially also be used for supercapacitors that are needed for caching the calculation results in computational devices that use polymer wrapped nanotubes as transistors. Although fundamental, these studies develop a strategy to enlighten this room that is barely only visible at the bottom of the nano-scale. N2 - Nanoelektronik ist eine wichtige Technologie um das Größen-Limit gegenwärtiger Silizium-basierter Technologie zu überwinden. Einwandige Kohlenstoffnanoröhren sind halbleitende Moleküle, die eine Reihe von Eigenschaften dafür zur Verfügung stellen. Sie sind einsetzbar als Sensoren, in der Fernmeldetechnik und für elektronische Rechenoperationen. Aufgrund ihres hohen Verhältnisses von Oberfläche zu Volumen werden nahezu alle Eigenschaften von Kohlenstoffnanoröhren stark von Adsorption beeinflusst. Einwandige Kohlenstoffnanoröhren mit kleineren Durchmessern (0.7-0.9nm) zeigen einen stärkeren Einfluss auf Phänomene, die an der Oberfläche auftreten. Um speziell diese Nanoröhren genauer zu untersuchen wurde eine Synthese Strategie entwickelt, die Nanoröhren mit hoher Qualität und Länge herstellen kann und dabei eine saubere Oberfläche gewährleisten ohne ihre Emissions-Stärke durch Bündelung zu verlieren. Die erhaltenen Ergebnisse unterstützen Studien aus der Literatur, die zumeist an Röhren mit größeren Durchmessern durchgeführt wurden. Die Größe des Datensatzes erlaubt es, Nanoröhren mit perfekten Emissions-Eigenschaften und großer mechanischer Stabilität auszuwählen. Adsorptionen beeinflussen die Bewegung und Bindungs-Stärke der Excitonen, da sie ein Coulomb Potential an der Außenseite der Röhre ausbilden. Um die Adsorptionsprozess an der Oberfläche mit minimalen konkurrierenden Effekten zu untersuchen, wurde ein spezielles mikroskopisches Setup gewählt und eine Messmethode entwickelt um dieses System zu untersuchen. Das System wurde mit Hilfe von Bildern und Spektren charakterisiert. Über eine Simulation wurde außerdem gezeigt dass die untersuchten Nanoröhren große Diffusionslängen (>350nm) und Exciton Größen (<8.5nm) besitzen müssen. Der Adsorptions Prozess an Kohlenstoffnanoröhren wurde sowohl mit Molekülen in der Gas-Phase untersucht, also auch in Lösungsmitteln und mit Feststoffen. Alle Experimente wurde dabei an frei hängenden Röhren durchgeführt, die auf einem Silizium Wafer Substrat aufgebracht wurden. Die Experimente in der Gas Phase zeigten, dass die excitonische Emissions-Energie eine instantane und schnelle Blauverschiebung erfährt wenn die Nanoröhren mit einem Laser angeregt werden. Diese Verschiebung wurde auf die Desorption von Oberflächenverunreinigungen zurückgeführt, die an Luft inhärent die Messung beeinflussen. Durch die Annahme, nach der Untersuchung eine reine Oberfläche zu erhalten, konnte die Referenz der Vakkum-Emission erstellt werden, was es ermöglicht, den Einfluss der dielektrischen Umgebung genauer zu bestimmen. In einem weitern Experiment wurde die Adsorption von Wasserstoff getestet. In diesen Systemen bildet sich durch die Ausbildung von sp 3 -Defekten eine neue Emissionsbande aus. Solche Emissionen werden derzeit für die Anwendung als Einzelphotonenemitter diskutiert. Die hier vorgestellte Methode erlaubt die direkte Synthese solcher Systeme im CVD Ofen. Die frei hängenden Nanoröhren wurden weiter analysiert um den Effekt des Lösungsmittels auf die Emission detailiert zu untersuchen. Es wurde gezeigt, dass in Hexan und Acetonitril ein signifikant hoher Quantenausbeute-Verlust zu beobachten ist. Toluol hingegen zeigte sich hier am Besten. Die Energie-Verschiebungen waren insignifikant unterschiedlich zwischen den Lösungsmitteln. Ein Spezialfall war bei Acetonitril zu beobachten, in dem sich über den Zeitraum von 24h eine starke Emission herausbildet, die auf eine Kopplung mit Lösungsmittel-Schwingungen zurückgeführt wird. Die Stärke dieser Emission erlaubt die Vermutung, dass es sich um eine gekoppelte Schwingung von linear orientiertem Acetonitril in der Nanoröhre handelt. Eine solch starke Emission könnte zu Anwendungen in Zell-Gewebe führen, da weder Anregung noch Emission sich im Fenster der Blut- und Wasserabsorption befindet. Durch die eindeutige Identifizierung von Lösungsmitteleffekten auf die Dispergierung von Kohlenstoffnanoröhren war es möglich, den Prozess der Anlagerung von Polyfluorene Polymeren direkt zu beobachten. Das Hinzufügen von Polymer zur Lösung führt zu einem schrittweisen reversiblen Anstieg der Emissions Intensität. Dieser Anstieg wird von einem gleichzeitigen irreversiblen schrittweisen Abfall der Emissionsintensität begleitet. Leider ist das System nur geeignet, Adsorptionen bis maximal 100nm Länge aufzulösen. Eine detaillierte Analyse ist daher schwer. Trotzdem wird vermutet, dass es sich bei dem langsamen Prozess um das Ausbilden von π -Stapeln handelt, wobei der schnelle Prozess mit der nicht-kovalenten Bindung der Polymer-Seitenketten an die Oberfläche assoziiert wird. Obwohl über die eigentliche Bindung des Polymers nur Vermutungen angestellt werden können, so wirft die Untersuchung doch einen Fokus auf die Wahl des Lösungsmittels, da diese Entscheidung einen viel größeren Effekt verursacht, als die Bindung des Polymers selbst. Diese Arbeit stellt fundamentale Betrachtungen zur Adsorption von verschiedenen Molekülen an Kohlenstoffnanoröhren auf. Die Betrachtungen wurden mit festen, flüssigen und gasförmigen Molekülen durchgeführt. Die Ergebnisse zeigen, dass Nanoröhren geeignet sind, als Molekül-Sensoren verwendet zu werden, da sie stark auf Änderungen in ihrer Umgebung reagieren können. Weiterhin wurden Lösungsmittel und Eigenschaften aufgezeigt, die die Quanteneffizienz signifikant beeinflussen. Eine Anwendung in der biologischen Mikroskopie ist denkbar, genauso wie für eine effizientere und sicherere Fernmeldeinfrastruktur. Weiterhin wurden Wege aufgezeigt, Super-Kondensatoren auf Nanorohr-Basis zu bauen, die als Anwendung in einem Kohlenstoffnanorohr-basierenden Computer von Interesse sein könnten. Obwohl die Erkenntnisse fundamental sind, zeigen diese Studien, dass es mit bestimmten Tricks möglich ist, den Raum am unteren Ende der Nanometerskala zu erforschen und zu entdecken. KW - Kohlenstoff-Nanoröhre KW - Einwandige Kohlenstoff-Nanoröhre KW - Adsorption KW - Chemisorption KW - Physisorption KW - nanotube KW - microscopy KW - adsorption Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211755 ER -