TY - THES A1 - Kerner, Florian Tobias T1 - Reactions of rhodium(I) with diynes and studies of the photophysical behavior of the luminescent products T1 - Reaktionen von Rhodium(I) mit Diinen und Untersuchung der photophysikalischen Eigenschaften der lumineszenten Produkte N2 - Chapter 1 deals with the reaction of [Rh(acac)(PMe3)2] with para-substituted 1,4-diphenylbuta-1,3-diynes at room temperature, in which a complex containing a bidentate organic fulvene moiety, composed of two diynes, σ-bound to the rhodium center is formed in an all-carbon [3+2] type cyclization reaction. In addition, a complex containing an organic indene moiety, composed of three diynes, attached to the rhodium center in a bis-σ-manner is formed in a [3+2+3] cyclization process. Reactions at 100 °C reveal that the third diyne inserts between the rhodium center and the bis-σ-bound organic fulvene moiety. Furthermore, the formation of a 2,5- and a 2,4-bis(arylethynyl)rhodacyclopentadiene is observed. The unique [3+2] cyclization product was used for the synthesis of a highly conjugated organic molecule, which is hard to access or even inaccessible by conventional methods. Thus, at elevated temperatures, reaction of the [3+2] product with para-tolyl isocyanate led to the formation of a purple organic compound containing the organic fulvene structure and one equivalent of para-tolyl isocyanate. The blue and green [3+2+3] complexes show an unusually broad absorption from 500 – 1000 nm with extinction coefficients ε of up to 11000 M-1 cm-1. The purple organic molecule shows an absorption spectrum similar to those of known diketopyrrolopyrroles. Additionally, the reaction of [Rh(acac)(PMe3)2] with para-tolyl isocyanate was investigated. A cis-phosphine complex of the form cis-[Rh(acac)(PMe3)2(isocyanate)2] with an isocyanate dimer bound to the rhodium center by one carbon and one oxygen atom was isolated. Replacing the trimethylphosphine ligands in [Rh(acac)(PMe3)2] with the stronger σ-donating NHC ligand Me2Im (1,3-dimethylimidazolin-2-ylidene), again, drastically alters the reaction. Similar [3+2] and [3+2+3] products to those discussed above could not be unambiguously assigned, but cis- and trans-π-complexes, which are in an equilibrium with the two starting materials, were formed. Chapters 2 is about the influence of the backbone of the α,ω-diynes on the formation and photophysical properties of 2,5-bis(aryl)rhodacyclopentadienes. Therefore, different α,ω-diynes were reacted with [Rh(acac)(PMe3)2] and [Rh(acac)(P(p-tolyl)3)2] in equimolar amounts. In general, a faster consumption of the rhodium(I) starting material is observed while using preorganized α,ω-diynes with electron withdrawing substituents in the backbone. The isolated PMe3-substituted rhodacyclopentadienes exhibit fluorescence, despite the presence of the heavy atom rhodium, with lifetimes τF of < 1 ns and photoluminescence quantum yields Φ of < 0.01 as in previously reported P(p-tolyl)-substituted 2,5-bis(arylethynyl)rhodacyclopentadienes. However, an isolated P(p-tolyl)-substituted 2,5-bis(aryl)rhodacyclopentadiene shows multiple lifetimes and different absorption and excitation spectra leading to the conclusion that different species may be present. Reaction of [Rh(acac)(Me2Im)2] with dimethyl 4,4'-(naphthalene-1,8-diylbis(ethyne-2,1-diyl))dibenzoate, results in the formation of a mixture trans- and cis-NHC-substituted 2,5-bis(aryl)rhodacyclopentadienes. In chapter 3 the reaction of various acac- and diethyldithiocarbamate-substituted rhodium(I) catalysts bearing (chelating)phosphines with α,ω-bis(arylethynyl)alkanes (α,ω-diynes), yielding luminescent dimers and trimers, is described. The photophysical properties of dimers and trimers of the α,ω-diynes were investigated and compared to para-terphenyl, showing a lower quantum yield and a larger apparent Stokes shift. Furthermore, a bimetallic rhodium(I) complex of the form [Rh2(ox)(P(p-tolyl)3)4] (ox: oxalate) was reacted with a CO2Me-substituted α,ω-tetrayne forming a complex in which only one rhodium(I) center reacts with the α,ω-tetrayne. The photophysical properties of this mixed rhodium(I)/(III) species shows only negligible differences compared to the P(p-tolyl)- and CO2Me-substituted 2,5-bis(arylethynyl)rhodacyclopentadiene, previously synthesized by Marder and co-workers. N2 - Kapitel 1 beschäftigt sich mit der Umsetzung von [Rh(acac)(PMe3)2] mit zwei Äquivalenten para-substituierten 1,4-Diphenylbuta-1,3-diins bei Raumtemperatur. Dabei bildete sich ein Komplex, welcher eine organische Fulveneinheit, bestehend aus zwei Diinen und verbunden über zwei σ-Bindungen mit dem Rhodiumzentralatom, besitzt. Diese Verbindung bildet sich in einer „all-carbon“ [3+2] ähnlichen Zyklisierungsreaktion. Ebenso konnte aus derselben Reaktion ein Komplex mit einer Indeneinheit, bestehend aus drei Diinen, welche durch zwei σ-Bindungen mit dem Rhodiumzentralatom verbunden sind, isoliert und charakterisiert werden. Diese Verbindung bildet sich in einer „all-carbon“ [3+2+3] ähnlichen Zyklisierungsreaktion. Experimente bei 100 °C zeigen, dass sich das zusätzliche dritte Diin zwischen dem Rhodiumzentralatom und der organischen Fulveneinheit einfügt. Zusätzlich konnte die Bildung von 2,4- und 2,5-Bis(arylethinyl)rhodazyklopentadienen bei 100°C beobachtet werden. Diese seltene [3+2] Zyklisierungsreaktion kann benutzt werden um konjugierte, organische Moleküle darzustellen, welche sonst nur schwer oder gar nicht mit bisher bekannten Synthesemethoden zugänglich sind. In der Umsetzung des [3+2] Komplexes mit para-Tolylisocyanat bei 80 °C konnte ein violetter, rein organischer Feststoff erhalten werden, bestehend aus der organischen Fulveneinheit und einem Äquivalent para-Tolylisocyanat. Die blauen und grünen [3+2+3] Komplexe zeigen unter anderem eine ungewöhnliche breite Absorption von 500 – 1000 nm mit einem Extinktionskoeffizienten von bis zu 11000 M-1 cm-1. Die violette, rein organische Verbindung zeigt ein Absorptionsspektrum ähnlich zu bereits bekannten Diketopyrrolopyrrolen. Auch wurde die Reaktion von [Rh(acac)(PMe3)2] mit para-Tolylisocyanat untersucht. Es konnte ein cis-phosphan Komplex, bei dem ein para-Tolylisocyanat-Dimer über ein Kohlenstoff- und ein Sauerstoffatom an das Rhodiumzentralatom koordiniert, isoliert und charakterisiert werden. Substitution des Trimethylphosphans im Rh(I)-Präkursors durch einen NHC Liganden, nämlich Me2Im (1,3-dimethylimidazolin-2-yliden) führt zu einem unterschiedlichen Reaktionsverlauf. Ähnliche [3+2] und [3+2+3] Komplexe konnten nicht zweifelsfrei bestätigt werden, dafür konnte aber gezeigt werden, dass sich in der Reaktion bildende cis- und trans-Komplexe im Gleichgewicht mit den verwendeten Startmaterialien befinden. Im zweiten Kapitel dieser Arbeite wurde der Einfluss des Rückgrats von α,ω-bis(arylethynyl)alkanen (α,ω-Diine) auf die Bildung und die photophysikalischen Eigenschaften von 2,5-Bis(aryl)rhodazyklopentadienen untersucht. Dazu wurden mehrere α,ω-Diine mit unterschiedlichem Rückgrat synthetisiert und diese mit [Rh(acac)(PMe3)2] und [Rh(acac)(P(p-tolyl)3)2] in äquimolaren Mengen reagiert. Es konnte ein schnellerer Verbrauch des Rh(I)-Präkursors bei der Verwendung von vororganisierten α,ω-Diinen mit elektronenziehenden Substituenten am Rückgrat festgestellt werden. Die PMe3-substituierten Rhodazyklopentadiene zeigen Fluoreszenz, trotz der Anwesenheit eines Schwermetalls. Lebenszeiten von τF < 1 ns und Quantenausbeuten von Φ < 0.01, ähnlich wie in P(p-tolyl)-substituierten 2,5-Bis(arylethynyl)rhodazyklopentadienen wurden beobachtet. Bei einem isolierten P(p-tolyl)-substituierten 2,5-Bis(aryl)rhodazyklopentadien konnten mehrere Lebenszeiten, wie auch unterschiedliche Absorptions- und Anregungsspektren detektiert werden, was zu der Schlussfolgerung führt, dass in Lösung mehrere Spezies vorhanden sind. Die Reaktion von [Rh(acac)(Me2Im)2] mit Dimethyl 4,4'-(naphthalen-1,8-diylbis(ethyn-2,1-diyl))dibenzoat führt zur Bildung einer Mischung aus trans- und cis-NHC-substituierter 2,5-Bis(aryl)rhodazyklopentadienen. Im dritten Kapitel, wurde die Bildung lumineszenter Dimere und Trimere aus der Umsetzung von verschiedenen α,ω-Diinen mit katalytischen Mengen verschiedener acac- und diethyldithiocarbamat-substituierter Rhodium(I)-Katalysatoren mit (chelatisierenden) phosphanen untersucht. Anschließend wurden die photophysikalischen Eigenschaften der Dimere und Trimere untersucht und mit para-Terphenyl verglichen. Dabei wurden ähnliche Lebenszeiten, eine geringere Quantenausbeute wie auch größere Stokes-Verschiebungen der Dimere und Trimere im Vergleich zu para-Terphenyl gefunden. Auch wurde die Reaktion zwischen einem bimetallischen Rhodium Komplex [Rh2(ox)(P(p-tolyl)3)4] (ox: oxalat) und einem CO2Me-substituiertem α,ω-bis(arylbutadiynyl)alkan (α,ω-Tetrain) untersucht. In dieser Umsetzung reagierte nur eine der beiden möglichen Rhodium(I)-zentren mit dem α,ω-Tetrain unter Bildung eines 2,5-Bis(arylethynyl)rhodazyklopentadiens. Die photophysikalischen Eigenschaften dieser gemischten Rhodium(I)/(III)-Spezies zeigt nur marginale unterschiede, verglichen mit einem mononuklearen P(p-tolyl)- und CO2Me-substituiertem 2,5-Bis(arylethynyl)rhodazyklopentadiens, welches zuvor im Arbeitskreis Marder schon synthetisiert wurde. KW - Übergangsmetallkomplexe KW - Rhodium KW - Übergangsmetallkomplex KW - Zyklisierung KW - Transitionmetal KW - Cyclization Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-209107 ER - TY - THES A1 - Eck, Martin T1 - Iron- and Copper-catalyzed Borylation of Alkyl and Aryl Halides and B–B Bond Activation and NHC Ring-expansion Reactions of the Diboron(4) Compound Bis(ethylene glycolato)diboron (B\(_2\)eg\(_2\)) T1 - Eisen- und kupferkatalysierte Borylierung von Alkyl- und Arylhalogeniden und B-B Bindungsaktivierung und NHC Ringerweiterungsreaktionen der Diboran(4) Verbindung Bis(ethylenglykol)diboran (B\(_2\)eg\(_2\)) N2 - The purpose of the present work was, in the first part, to investigate the potential of iron-based metal complexes in catalytic borylation reactions with alkyl halides as substrates and B2pin2 as the borylation reagent. Moreover, extended studies of the recently reported, copper mediated borylation reactions of aryl halides were performed, including the screening of substrates and alkoxy bases as well as ligand-screening. Investigations were undertaken on the role of Cu-nanoparticles, which might be involved in this catalytic reaction. Furthermore, Cu-phosphine complexes were synthesized as precursors, but attempts to isolate Cu-boryl species which are intermediates in the proposed catalytic cycle were unsuccessful, although 11B NMR evidence for a Cu-boryl complex was obtained. In the second part of this work, the alternative, Lewis-acidic diboron(4) compound bis(ethylene glycolato)diboron (B2eg2) was synthesized to compare its reactivity with the reactivity of other diboron(4) compounds (e.g. B2neop2, B2cat2, B2pin2 and B2(NMe2)4). Therefore, reactions of B2eg2 with different Lewis-bases, such as NHCs and phosphines, were performed to investigate the possible formation of sp2-sp3 or sp3-sp3 adducts and ring-expansion reactions (RERs). The aim was to obtain a better general insight into the reactivity of diboron(4) compounds with Lewis-bases because they are both used as reactants in transition metal-catalyzed and metal-free borylation reactions. Understanding the B–B bond activation process promoted by Lewis-bases provides a new perspective on the reaction pathways available for various borylation reactions. N2 - Im ersten Teil der vorliegenden Arbeit wurde das Potential eisenkatalysierter Borylierungsreaktionen von Alkylhalogeniden (Substrate) mit B2pin2 als Borylierungsreagenz untersucht. Weiterhin wurden detaillierte und intensive Untersuchungen zur literaturbekannten kupferkatalysierten Borylierung von Arylhalogeniden durchgeführt, einschließlich eines Screenings von unterschiedlich funktionalisierten Substraten und diversen Alkoxybasen. Es wurde ebenfalls ein sehr umfangreiches Ligandenscreening durchgeführt. Des Weiteren wurden die mögliche Entstehung und der mögliche Einfluss von Kupfernanopartikeln auf die Borylierungsreaktion untersucht. Um Intermediate der kupferkatalysierten Borylierung zu untersuchen wurden Kupferphosphankomplexe als Vorläufermoleküle für die Synthese von Kupferborylkomplexen hergestellt. Aufgrund der sehr hohen Reaktivität gelang es jedoch nicht, die entsprechenden Kupferborylkomplexe zu isolieren und zu charakterisieren. Es gelang allerdings in einem in situ 11B{1H}-NMR-Experiment, ein 11B{1H}-Signal zu detektieren, welches in dem zu erwartendem Bereich für einen Kupferborylkomplex lag und einen ersten Hinweis für die Bildung eines solchen Kupferborylkomplexes lieferte. Im zweiten Teil der vorliegenden Arbeit wurde das alternative, lewissaure Diboran(4)-Derivat Bis(ethylenglykol)diboran (B2eg2) synthetisiert, um dessen Reaktivität mit der Reaktivität von anderen Diboran(4)-Verbindungen (z.B. B2neop2, B2cat2, B2pin2 und B2(NMe2)4) zu vergleichen. Hierfür wurden Reaktionen von B2eg2 mit unterschiedlichen Lewisbasen wie NHCs und Phosphanliganden durchgeführt und die mögliche Bildung von sp2-sp3 oder sp3-sp3 hybridisierten mono- bzw. bis-Addukten sowie mögliche NHC-Ringerweiterungsreaktionen untersucht. Im Allgemeinen wurde im zweiten Teil der Arbeit versucht ein besseres Verständnis über die Reaktivität von Diboran(4)-Verbindungen mit Lewisbasen zu erlangen, da beide als Reaktanten in übergangsmetallkatalysierten und metallfreien Borylierungsreaktionen verwendet werden. Dies macht es zwingend erforderlich die B–B-Bindungsaktivierung durch Lewisbasen zu verstehen, da hierdurch eine komplett neue Perspektive auf mögliche Reaktionspfade vieler Borylierungsreaktionen eröffnet wird. KW - Boron KW - Catalysis KW - Chemistry Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149791 ER - TY - THES A1 - Hailmann, Michael T1 - Carba-closo-dodecaboranylethinyl-Liganden und deren Einsatz als Liganden für Münzmetall(I)-Komplexe T1 - Carba-closo-dodecaboranyl ligands and their use as ligands for coinage metal complexes N2 - Ein wesentliches Ziel dieser Arbeit war die Synthese von mehrfach funktionalisierten Carba-closo-dodecaborat-Anionen, um lineare Bausteine für höhermolekulare Netzwerke zu generieren. Speziell funktionelle Gruppen, die entweder zwei Koordinationstellen aufweisen oder weitere Funktionalisierungen ermöglichen, stehen im Fokus. Des Weiteren soll die Koordinationschemie von Carba-closo-dodecaborat-Anionen mit Ethinylgruppen am antipodalen Boratom, besonders in Hinsicht auf die Bildung von Münzmetall(I)-Komplexen untersucht werden. Im Rahmen dieser Themengebiete wurden zahlreiche zweifach funktionalisierte Derivate des Carba-closo-dodecaboratanions synthetisiert. Drei ausgewählte Anionen sind in Abbildung 141 gezeigt. Überdies wurde mit der Synthese von [1-H2CHCC(O)NH-closo-1-CB11H11]- gezeigt, dass die Aminofunktion derivatisiert werden kann. Diese Resultate ermöglichen die Synthese einer breiten Palette an linearen Bausteinen, beispielsweise für die Verwendung als Linker in höhermolekularen Netzwerken.Zudem wurden Bausteine synthetisiert, welche über Wasserstoffbrücken-bindungen lineare Stränge bilden . Aufgrund des, für Carboxylgruppen selten beobachteten Motivs von tetrameren Einheiten mit dem Graph-Set-Deskriptor [R44(16)] sticht die Struktur von [1-HO(O)C-12-HCC-closo-1-CB11H10]- besonders hervor, da normalerweise für Carbonsäuren die Bildung von Dimeren bevorzugt ist.[129-131] Die maximale Länge des tetrameren, cyclischen Bausteins beträgt 2.24 nm. Das Anion [1-H2N(O)C-12-HCC-closo-1-CB11H10]- bildet einen linearen Strang mit einer Länge von 2.10 nm, welcher an beiden Enden funktionelle Gruppen trägt. Ein interessantes Einsatzgebiet von derartigen Verbindungen ist wiederum die Verwendung als Liganden im Bereich von Münzmetall(I)-Komplexen, wie sie beispielsweise von Himmelspach et al.[87] synthetisiert wurden, wobei in diesem Fall über das Wasserstoffbrückenbindungsmotiv ein Verknüpfungspunkt vorhanden wäre, um höhermolekulare Netzwerke zu bilden. Des Weiteren wurde der elektronische Einfluss verschiedener funktioneller Gruppen auf die Polarisierung der Alkinylfunktion über das {closo-CB11}-Gerüst untersucht. Die Differenzen der experimentellen und berechneten chemischen Verschiebungen der Alkinylresonanzen stehen in linearem Zusammenhang mit der berechneten Differenz der NBO-Ladung des entsprechenden Clusters, wie Abbildung 143 zu entnehmen ist. Im Vergleich mit in 1,4-Position substituierten Derivaten von Benzol und Bicyclo[2.2.2]oktan wird deutlich, dass bei dem Carba-closo-dodecaborat-Anion in größerem Maße induktive Effekte eine Rolle spielen, aber zu einem gewissen Teil auch mesomere Effekte über das {closo-1-CB11}-Gerüst vermittelt werden. Dementsprechend ist das Carba-closo-dodecaborat-Anion zwischen den beiden Extremfällen Benzol - mit dominierenden mesomeren Effekten - und Bicyclo[2.2.2]oktan - mit reinen induktiven Effekten - einzuordnen.Durch die Verwendung ausgewählter funktionalisierter Pyridinderivate wurde ein breites Spektrum unterschiedlicher AgI-Cluster synthetisiert. Mit Pyridin und 4-Me-Pyridin ist die Struktur im Festkörper ein Oktaeder. Bei Verwendung von 4 tBu-Pyridin wird neben eines, auf einer Seite geöffneten Oktaeders, auch ein stark verzerrtes geschlossenes Oktaeder beobachtet. Wird 4-F3C-Pyridin als Ligand verwendet, werden je nach Reaktionstemperatur zwei verschiedene geometrische Grundgerüste im Festkörper erhalten. Bei Temperaturen über 20 °C wird ein Oktaeder und bei Temperaturen unter 15 °C ein Dekaeder aus AgI-Ionen im Festkörper gebildet. Bei Einsatz von 3,5-Me-Lutidin hingegen formt sich eine pentagonale Bipyramide.Diese Komplexe phosphoreszieren bei Raumtemperatur, was für diese Verbindungsklasse sehr selten beobachtet wird. Des Weiteren konnten Informationen hinsichtlich der Struktur-Eigenschafts-Beziehung solcher Komplexe erhalten werden, so wird die Quantenausbeute der einzelnen Komplexe maßgeblich von der Struktur beeinflusst wird. Während das am häufigsten beobachtete geometrische Grundgerüst das Oktaeder ist und die Quantenausbeuten für diese Serie von Clustern in einem Bereich zwischen 0.01 und 0.14 liegen, wird bei Verwendung von 3,5-Me2-Lutidin als Ligand eine pentagonale Bipyramide gebildet, die sich darüber hinaus mit einer Quantenausbeute von 0.76 deutlich von allen anderen bislang synthetisierten Komplexen hervorhebt. Mit den eben erwähnten Silber(I)-Komplexen wurden Ergebnisse bei Umsetzungen mit halogenidhaltigen Salzen erhalten. Auch hier wurden Unterschiede bei den verschiedenen Liganden beobachtet und bei Verwendung von 3,5-Me2-Lutidin wurden, in Abhängigkeit der verwendeten Kationen der eingesetzten Halogenid-Salze, unterschiedliche Komplexe erhalten. Im Falle des [Et4N]+-Kations bleibt die pentagonale Bipyramide erhalten und [Et4N][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)9] bildet sich, während bei Verwendung des [Ph4P]+-Kations [Ph4P][Ag7(12-CC-closo-1-CB11H11)4(3,5-(Me)2C5H3N)13] erhalten wird und die Struktur im Kristall ist mit der von [Ag(C5H5N)4][(Ag7(12-CC-closo-1-CB11H11)4(C5H5N)11] verwandt. Die Struktur-Eigenschaft-Beziehung der Komplexe wird hierbei bestätigt, da für beide Komplexe sehr unterschiedliche Quantenausbeuten gemessen werden. Der Cluster mit dem pentagonal bipyramidalen Aufbau [Et4N][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)8] hat eine Quantenausbeute von 0.23 gemessen, während die Quantenausbeute im Fall von [Ph4P][Ag7(12-CC-closo-1-CB11H11)4(3,5-(Me)2C5H3N)13] nur 0.04 beträgt. Dies belegt, dass die Struktur des AgI-Clusters im Festkörper die Lumineszenzeigenschaften maßgeblich bestimmt. Des Weiteren wurden verschiedene Münzmetallkomplexe mit Carboranyl-ethinyl- und Triphenylphosphan-Liganden synthetisiert . Auch diese Komplexe lumineszieren bei Bestrahlung mit UV-Licht. Im Falle des gemischten Komplexes {12-(Ph3PAu)((Ph3P)2Ag)]-CC-closo-1-CB11H11} konnte die Quantenausbeute auf 0.39 im Vergleich zu den reinen AgI- und AuI-Verbindungen erhöht werden. In diesen Fällen liegt die Quantenausbeute bei lediglich 0.01 beziehungsweise 0.02. N2 - The synthesis of difunctionalized carba-closo-dodecaborate anions was an essential aim of this work in order to form linear building blocks for the use in molecular frameworks. The focus was on functional groups with two coordination centers or the ability for further functionalization. Furthermore, of major interest was the coordination chemistry of alkyne-functionalized carba-closo-dodecaborate anions regarding their ability to form coinage metal complexes. As a part of this work numerous difunctionalized complexes were synthesized.Moreover, linear building blocks with the ability to form linear assemblies due to hydrogen bonding were prepared. At this point the structure of [1-HO(O)C-12-HCC-closo-1-CB11H10]- has to be highlighted because of the formation of a tetrameric unit with the graph-set-descriptor [R44(16)] and a maximum length of 2.24 nm. Furthermore, the structure of [1-H2N(O)C-12-HCC-closo-1-CB11H10]- in the solid state is a dimeric unit with a length of 2.10 nm and two coordination centers at both ends. The electronic influence of different functional groups was studied regarding their effect on the polarisation over the {closo-CB11} cage of the alkyne function. The experimental and calculated values of D[d(13CCC)] show a linear correlation with the corresponding calculated NBO charges (Figure 3). A comparison with functionalized derivatives of benzene and bicyclo[2.2.2]octane shows that inductive and mesomeric effects are transported over the {closo-CB11} cage. The mesomeric effects play a minor role, therefore, the {closo-CB11} cage has to be classified between benzene derivatives (with dominantly mesomeric effects) and derivatives of bicyclo[2.2.2]octane (with only inductive effects).A range of different AgI clusters (figure 4) was obtained by using selected derivatives of pyridine. In the solid state, the clusters form octahedra in the case of C5H5N and 4-Me-C5H4N. In the case of 4-tBu-C5H4N, an octahedron with one open side is observed, along with a distorted octahedron, in a 95:5 ratio. When 4-F3C-C5H4N is used as a ligand, two different complexes were obtained, depending on the reaction temperature. In contrast, the structure of [Ag(3,5-Me2-C5H3N)4][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)10] is a pentagonal bipyramid.These clusters show phosphorescence at room temperature, which is rare for this class of complexes. Whereas the octahedron is the dominant motif in the solid state, for the complex [Ag(3,5-Me2-C5H3N)4][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)10] a quantum yield of 0.76 is observed, which is markedly higher than those of other AgI clusters. The relation between the structure of the AgI clusters and their luminescence properties is verified by further reactions with halide salts. Two different complexes were obtained by reacting [Ag(3,5-Me2-C5H3N)4][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)10] with [Et4N]Cl and [Ph4P]Br. The geometric framework of [Et4N][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)8] remains a pentagonal bipyramid, whereas an octahedron is observed in the case of [Ph4P][Ag7(12-CC-closo-1-CB11H11)4(3,5-(Me)2C5H3N)13] (figure 5). Due to the structure of [Ph4P][Ag7(12-CC-closo-1-CB11H11)4(3,5-(Me)2C5H3N)13] the quantum yield (in this case 0.04) is significantly lower than the value of [Et4N][Ag7(12-CC-closo-1-CB11H11)4(3,5-Me2-C5H3N)8] (Phi = 0.23). Several coinage metal complexes were synthesized with carboranylalkynyl and triphenylphosphine ligands (figure 6). These complexes also show phosphorescence in the solid state. The quantum yield rises to 0.39 in the case of {12-[(Ph3PAu)((Ph3P)2Ag)]-CC-closo-1-CB11H11} whereas the values for the homonuclear metal complexes are very low (0.01-0.02). KW - Carborane KW - Münzmetall(I)-Komplexe KW - Alkinylkomplexe KW - Funktionalisierte Carborat-Anionen KW - Carboranylethinyl-Liganden KW - Lumineszenz Ag(I)-Komplexe Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-149249 ER - TY - THES A1 - Lubitz, Katharina T1 - Synthese und Untersuchungen zur Reaktivität NHC-stabilisierter Kobaltverbindungen T1 - Synthesis and reactivity of NHC-stabilized cobalt complexes N2 - Die vorliegende Arbeit befasst sich mit der Synthese und den Eigenschaften verschiedener NHC-stabilisierter Kobaltkomplexe. Der Fokus liegt dabei einerseits auf der Entwicklung geeigneter Organokobaltverbindungen, welche sich in CVD bzw. ALD-Prozessen zur Abscheidung von elementarem Kobalt eignen. Hierfür wurden verschiedene NHC-stabilisierte sowie gemischt substituierte Kobalt(carbonyl)(nitrosyl)komplexe dargestellt und die thermischen Eigenschaften dieser Verbindungen untersucht. Andererseits wurden Studien zur Synthese und Reaktivität NHC-stabilisierter Halbsandwichverbindungen des Kobalts durchgeführt. Dabei wurde unter anderem überprüft, inwiefern sich der sterische Einfluss des NHC-Liganden auf die Fähigkeiten auswirkt, Element-Element-Bindungen in Silanen und Diboranen zu aktivieren. Ferner wurden weitere Untersuchungen zur Reaktivität derartiger Komplexe, insbesondere gegenüber Alkinen, vorgenommen. Ein weiterer Teil dieser Arbeit beschäftigt sich mit der Darstellung und Reaktivität NHC-Phosphiniden-stabilisierter Kobaltverbindungen. N2 - The present work concerns the synthesis and reactivity of various NHC-stabilized cobalt complexes. The first part focuses on the development of cobalt compounds suitable for depositing elemental cobalt in chemical vapor deposition processes (CVD and ALD). Therefore, a variety of NHC-stabilized cobalt carbonyl nitrosyl complexes, as well as asymmetrically substituted cobalt complexes, were synthesized and the thermal properties were investigated. Secondly, the thesis addresses the synthesis and reactivity of NHC-stabilized cobalt half sandwich complexes with a focus on the investigation of the influence of sterically demanding carbene ligands in the stoichiometric activation of element-element bonds, as well as further reactivity studies of this class of compounds. Furthermore, studies have been performed on the synthesis and reactivity of NHC-phosphinidene substituted cobalt complexes. KW - Kobalt KW - N-Heterozyklische Carbene KW - Chemische Gasphasenabscheidung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-206854 ER - TY - THES A1 - Berthel, Johannes H. J. T1 - Synthese und Charakterisierung neuer NHC-stabilisierter Nickelkomplexe für die Gasphasenabscheidung T1 - Synthesis and characterization of new NHC-stabilized nickel complexes for the vapor deposition N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Charakterisierung NHC-stabilisierter Nickelkomplexe, die durch weitere Co-Liganden wie Carbonyle, Olefine, Alkine, Alkyle, Cyanide oder Allylliganden koordiniert sind. Ferner gibt diese Arbeit einen Überblick über die thermischen Eigenschaften dieser Verbindungen, um deren Potenzial für den Einsatz zur Abscheidung elementaren Nickels in CVD- bzw. ALD-Prozessen abschätzen zu können. Dabei konnten vor allem die Substanzklassen der Carbonyl- und Alkylkomplexe als geeignete Präkursoren für die Gasphasenabscheidung elementaren Nickels identifiziert werden, von denen einige ausgewählte Vertreter bereits erfolgreich in CVD-Prozessen getestet wurden. N2 - The present work is about the synthesis and characterization of NHC-stabilized nickel complexes, which are coordinated by further co-ligands like carbonyls, olefins, alkynes, alkyls, cyanides or allylic ligands. This work presents an overview of the thermical properties of these nickel compounds, which gives an insight in their potential for using them to deposit elemental nickel in CVD and ALD processes. It was found the carbonyl and alkyl complexes were identified as useful precursors for vapor depositing elemental nickel. Some of these compounds have already been tested successfully in CVD processes. KW - Nickelkomplexe KW - Heterocyclische Carbene <-N> KW - CVD-Verfahren KW - NHC KW - Nickel KW - Gasphasenabscheidung KW - Carbene Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147571 ER - TY - THES A1 - Hock, Andreas T1 - NHC-stabilized Alanes and Gallanes T1 - NHC-stabilisierte Alane und Gallane N2 - This thesis describes the synthesis and reactivity of NHC-stabilized Lewis-acid/Lewis-base adducts of alanes and gallanes (NHC = Me2ImMe, iPr2Im, iPr2ImMe, Dipp2Im, Dipp2ImH). As this field of research has developed tremendously, especially in the last five years, the first chapter provides an overview of the current state of knowledge. The influence of electronegative π-donor-substituents on the stability of the NHC alane adducts is examined in chapter 2. For this purpose, the carbene stabilized alanes (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) were reacted with secondary amines of different steric demand and with phenols. The π-donor substituents saturate the Lewis acidic aluminium center and coordination of a second NHC-ligand was not observed. The strongly electronegative N and O substituents increase the Lewis acidity of the aluminium atom, which leads to stronger Al-CNHC as well as Al-H bonds, which inhibits the insertion of the carbene into the Al-H bond. In Chapter 3 the development of the synthesis and reactivity of carbene-stabilized gallanes is presented. The synthesis of NHC gallane adducts (NHC)∙GaH3, (NHC)∙GaH2Cl and (NHC)∙GaHCl2 and their reactivity towards NHCs and cAACMe were investigated in detail. The reaction of the mono- and dichlorogallanes (NHC)∙GaH2Cl and (NHC)∙GaHCl2 (NHC = iPr2ImMe, Dipp2Im) with cAACMe led to insertion of the cAACMe with formation of chiral and achiral compounds depending on the sterically demand of the used NHC. Furthermore, the formation of bis-alkylgallanes was observed for the insertion of two equivalents of cAACMe with release of the NHC ligand. Chapter 4 describes investigations concerning the synthesis and reactivity of NHC-stabilized iodoalanes and iodogallanes, which are suitable for the formation of cationic aluminium and gallium dihydrides. The reaction of (NHC)∙EH2I (E = Al, Ga) stabilized by the sterically less demanding NHCs (NHC = Me2ImMe, iPr2Im, iPr2ImMe) with an additional equivalent of the NHC led to the formation of the cationic bis-NHC aluminium and gallium dihydrides [(NHC)2∙AlH2]+I- and [(NHC)2∙GaH2]+I-. Furthermore, the influence of the steric demand of the used NHC was investigated. The adduct (Dipp2Im)∙GaH2I was reacted with an additional equivalent of Dipp2Im. Due to the bulk of the NHC used, rearrangement of one of the NHC ligands from normal to abnormal coordination occurred and the cationic gallium dihydride [(Dipp2Im)∙GaH2(aDipp2Im)] was isolated. Chapter 5 of this thesis reports investigations concerning the reduction of cyclopentadienyl-substituted alanes and gallanes with singlet carbenes. NHC stabilized pentamethylcyclopentadienyl aluminium and gallium dihydrides (NHC)∙Cp*MH2 (E = Al, Ga) were prepared by the reaction of (AlH2Cp*)3 with the corresponding NHCs or by the salt elimination of (NHC)∙GaH2I with KCp*. The gallane adducts decompose at higher temperatures with reductive elimination of Cp*H and formation of Cp*GaI. . The reductive elimination is preferred for sterically demanding NHCs (Dipp2Im > iPr2ImMe > Me2ImMe). In addition, NHC ring expansion of the backbone saturated carbene Dipp2ImH was observed for the reaction of the NHC with (AlH2Cp*)3, which led to (RER-Dipp2ImHH2)AlCp*. Furthermore, the reactivity of the adducts (NHC)∙Cp*EH2 (E = Al, Ga) towards cAACMe was investigated. The reaction of the alane adducts stabilized by the sterically more demanding NHCs iPr2ImMe and Dipp2Im afforded the exceptionally stable insertion product (cAACMeH)Cp*AlH V-10 with liberation of the NHC. The reaction of the gallium hydrides (NHC)∙Cp*GaH2 with cAACMe led to the reductive elimination of cAACMeH2 and formation of Cp*GaI. A variety of neutral and cationic carbene-stabilized alanes and gallanes are presented in this work. The introduction of electronegative π-donor substituents (Cl-, I-, OR-, NR2-) and the investigations on the thermal stability of these compounds led to the conclusion that the stability of alanes and gallanes increased significantly by such a substitution. Investigations on the reactivity of the NHC adducts towards cAACMe resulted in various insertion products of the carbene into the Al-H or Ga-H bonds and the first cAACMe stabilized dichlorogallane was isolated. Furthermore, a first proof was provided that carbenes can be used specifically for the (formal) reduction of group 13 hydrides of the higher homologues. Thus, the synthesis of Cp*GaI from the reaction of (NHC)∙Cp*GaH2 with cAACMe was developed. In the future, this reaction pathway could be of interest for the preparation of other low-valent compounds of aluminium and gallium. N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Reaktivität NHC stabilisierter Lewis-Säuren/Lewis-Basen Addukte von Alanen und Galanen. Da sich dieses Forschungsgebiet insbesondere in den letzten fünf Jahren rasant entwickelt hat, wird im ersten Kapitel dieser Arbeit eine Übersicht über den gegenwärtigen Kenntnisstand gegeben. Nachdem in vorangegangenen Arbeiten in der Gruppe gezeigt werden konnte, dass NHC-substituierte Alane (NHC)∙AlH3 eine begrenzte Stabilität bezüglich einer möglichen Eliminierung von Dihydroaminal NHC-H2 bzw. der Ringerweiterung oder Ringöffnung des NHC-Liganden aufweisen, wird in Kapitel 2 der Arbeit der Einfluss elektronegativer π-Donor-Substituenten am Aluminium auf die Stabilität der dargestellten NHC-Alan-Addukte untersucht. Dazu wurden die Carben stabilisierten Alane (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) mit sekundären Aminen unterschiedlichen sterischen Anspruchs und Phenolen umgesetzt. Die π-Donor Substituenten sättigen das Lewis-saure Aluminiumzentrum ab, sodass eine Koordination eines zweiten NHC-Liganden nicht möglich ist. Ferner erhöhen die stark elektronegativen N- und O-Substituenten die Lewis-Acidität des Aluminiumatoms, das zu stärkeren Al-CNHC, aber auch Al-H-Bindungen führt und vermutlich deshalb die Insertion des Carbens in diese Bindung erschwert ist. Kapitel 3 beschreibt die Entwicklung der Synthese von Carben-stabilisierten Gallanen und Untersuchungen zu deren Reaktivität. Es wurde die Darstellung der NHC-Gallan-Addukte und ihre Reaktivität gegenüber NHCs und cAACMe im Detail untersucht. Durch die Substitution der Hydrid-Substituenten durch Chloride konnte mit zunehmendem Chlorierungsgrad eine erhöhte Stabilität der Addukte festgestellt werden. Die Reaktion von cAACMe mit den NHC-stabilisierten Gallanen führt zur Insertion des cAACMe in die Ga-H-Bindung unter Ausbildung chiraler und achiraler Insertionsprodukten, sowie der zweifachen Insertion von cAACMe unter Abspaltung des NHC-Liganden und Bildung von Bisalkylgallanen. Kapitel 4 beschreibt Untersuchungen zur Synthese und Reaktivität Carben-stabilisierter Iodtriele, welche zur Darstellung kationischer Aluminium- und Galliumdihydride geeignet sind. Die Reaktion der NHC-Iodotriele (NHC)∙EH2I (E = Al, Ga), welche durch weniger sterisch anspruchsvollen NHCs stabilisiert werden, mit einem zusätzlichen Äquivalent des entsprechenden NHCs führt zur Bildung der kationischen bis-NHC-Aluminium- und Galliumdihydride [(NHC)∙MH2]+I. Um den Einfluss des sterischen Anspruchs des NHCs zu untersuchen, wurde das Addukt (Dipp2Im)∙GaH2I mit einem zusätzlichen Äquivalent Dipp2Im umgesetzt. Aufgrund der Sterik der verwendeten Carbene führte dies zur Umlagerung eines NHCs von normaler zu abnormaler Koordination unter Bildung von [(Dipp2Im)∙GaH2(aDipp2Im)]I. Im fünften Kapitel der Arbeit werden Untersuchungen zur Reduktion Cp*-substituierter Triele mit Carbenen beschrieben. Die Darstellung NHC-stabilisierter Cp* -Alane- und Gallane (NHC)∙Cp*MH2 (M = Al, Ga) erfolgte durch die direkte Umsetzung von (AlH2Cp*)3 mit den entsprechenden NHCs, bzw. durch Salzeliminierung ausgehend von (NHC)∙GaH2I mit KCp*. Die Gallan-Addukte zersetzen sich bei höheren Temperaturen unter reduktiver Eliminierung von Cp*H und Bildung von Cp*GaI. Die reduktive Eliminierung findet bevorzugt für sterisch anspruchsvolle NHCs statt. Darüber hinaus wurde eine NHC Ringerweiterungsreaktion des im Rückgrat gesättigten Carbens Dipp2ImH bei der Reaktion mit (AlH2Cp*)3 unter Ausbildung von (RER-Dipp2ImHH2)AlCp*. Darüber hinaus wurde die Reaktivität der Addukte (NHC)∙Cp*EH2 (E = Al. Ga) gegenüber cAACMe untersucht. Die Reaktion der durch die sterisch anspruchsvolleren NHCs iPr2ImMe und Dipp2Im stabilisierten Addukte mit cAACMe führte zur Bildung des außergewöhnlich stabilen Insertionsproduktes (cAACMeH)Cp*AlH unter Abspaltung des NHC-Liganden. Die Reaktion der Galliumhydride (NHC)∙Cp*GaH2 mit cAACMe führte stattdessen direkt zur reduktiven Eliminierung von cAACMeH2 unter Ausbildung von Cp*GaI.Im Rahmen dieser Arbeit wurden neutrale und kationische Carben-stabilisierte Alane und Gallane eingehend untersucht. Durch das Einführen elektronegativer π-Donor-Substituenten und Untersuchungen zur thermischen Belastbarkeit dieser Verbindungen wurde nachgewiesen, dass sich die Stabilität der Alane bzw. Gallane durch eine derartige Substitution deutlich erhöht. Untersuchungen zur Reaktivität der NHC-Addukte gegenüber cAACMe brachte diverse Insertionsprodukte des Carbens in Al-H bzw. Ga-H-Bindungen hervor. Ferner konnte das erste cAACMe-stabilisierte Dichlorogalliumhydrid dargestellt werden. Darüber hinaus wurde ein erster Nachweis erbracht, dass Carbene gezielt zur (formalen) Reduktion von Hydriden der höheren Homologen der Gruppe 13 verwendet werden können. So wurde die Synthese von Cp*GaI aus der Reaktion von (NHC)∙Cp*GaH2 mit cAACMe entwickelt. In Zukunft könnte dieser Reaktionspfad zur Darstellung niedervalenter Verbindungen der Triele Aluminium und Gallium von Interesse sein. KW - Aluminiumhydridderivate KW - Gallium KW - Heterocyclische Carbene <-N> KW - Aluminium KW - Carbene Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212525 ER - TY - THES A1 - Schulze, Marcus T1 - Ruthenium Complexes as Water Oxidation Catalysts and Photosensitizers T1 - Rutheniumkomplexe als Wasseroxidationskatalysatoren und Photosensibilisatoren N2 - In der vorliegenden Arbeit werden Aspekte der photokatalytischen Wasseroxidationsreaktion behandelt. Der erste Themenschwerpunkt der Dissertation beschäftigt sich mit einem supramolekularen Makrozyklus, der drei Rutheniummetallzentren enthält. Dieser neuartige Katalysator zeigt eine sehr hohe katalytische Aktivität und gewährt neue Einblicke in den Mechanismus der Wasseroxidationsreaktion. Des Weiteren wird auf die mit Licht interagierenden Komponenten der photokatalytischen Wasseroxidation eingegangen. Hierbei haben sich azabenz-anellierte Perylenderivate als vielseitige Farbstoffklasse herausgestellt. Die Kombination dieser Farbstoffe mit Metallkomplexen liefert metallorganische Verbindungen, die als Photosensibilisatoren eingesetzt werden können. N2 - The thesis discusses aspects of the photocatalytic water oxidation reaction. The first chapter deals with a supramolecular macrocycle which contains three ruthenium metal centers. This novel catalyst shows promising catalytic activity and provides insides into the mechanism of the water oxidation reaction. After this part, the focus lies on the light interacting components of the photocatalytic water oxidation. In this regard, the azabenz-annulated perylene derivatives appeared to be a promising dye class. The combination of these chromophores and metal complexes result in metal organic compounds, which have photosensitizer potential. KW - Farbstoff KW - Ruthenium KW - Fotokatalyse KW - Photosensibilisator KW - Makrozyklus KW - macrocycle KW - Wasseroxidationsreaktion KW - water oxidation reation KW - Perylen-Farbstoffe KW - perylene dyes KW - Katalyse KW - Wasserspaltung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-142454 ER - TY - THES A1 - Seufert, Jens T1 - Synthese und Reduktionsverhalten neuer Lewis-Basen-Addukte des Bors sowie Redox-aktiver Ligandentransfer durch Silylene T1 - Synthesis and reduction of novel Lewis-base adducts of boron and redox-active Ligand Transfer through silylenes N2 - Im Rahmen dieser Arbeit war es möglich, diverse Lewis-Basen für deren Einsatz zur Stabilisierung niedervalenter Borverbindungen zu testen. Dabei wurden neuartige Mono- und Diboran(4)-Addukte mit mesoionischen Carbenen, Phosphanen und Alkyl-verbrückten Carbenen synthetisiert, charakterisiert und deren Reduktionsverhalten getestet. Des Weiteren konnte gezeigt werden, dass elektronenreiche Bis(amidinato)- und Bis(guanidinato)silylene eine diverse Vielfalt an Reaktionstypen induzieren und dabei zu Redox-Reaktionen und Ligandenübertrag neigen. N2 - Within the scope of this work, a variety of Lewis-bases were tested for their capability to stabilize low-valent boron compounds. Thereby, novel adducts of mono- and diboranes with mesoionic carbenes, phosphines and alkyl-bridged carbenes were synthesized, characterized and their reduction behavior was tested. Furthermore, it was shown that electron-rich bis(amidinato)- and bis(guanidinato)silylenes induce a range of interesting reactions and are prone to ligand transfer as well as redox reactions. KW - Bor KW - Reaktivität KW - Silylen KW - Carbene KW - Ligandentransfer KW - verbrückende Carbene KW - mesoionische Carbene Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-173987 ER - TY - THES A1 - Kunz, Valentin T1 - Supramolecular Approaches for Water Oxidation Catalysis with Ruthenium Complexes T1 - Supramolekulare Ansätze für die Wasseroxidationskatalyse mit Rutheniumkomplexen N2 - The catalytic splitting of water into its elements is an important reaction to establish hydrogen as a solar fuel. The bottle-neck of this process is considered to be the oxidative half reaction generating oxygen, and good catalysts are required to handle the complicated redox chemistry involved. As can be learned from nature, the incorporation of the catalytically active species into an appropriate matrix can help to improve the overall performance. Thus, the aim of the present thesis was to establish novel supramolecular approaches to improve water oxidation catalysis using the catalytically active {Ru(bda)} fragment as key motive (bda = 2,2'-bipyridine-6,6'-dicarboxylate). First, the synthesis of ruthenium catalysts gathering three {Ru(bda)} water oxidation subunits in a macrocyclic fashion is described. By using bridging bipyridine ligands of different lengths, metallosupramolecular macrocycles with distinct sizes have been obtained. Interestingly, an intermediate ring size has been proven to be optimal for the catalytic water oxidation. Detailed kinetic, spectroscopic, and theoretical studies helped to identify the reaction mechanism and to rationalize the different catalytic activities. Furthermore, solubilizing side chains have been introduced for the most active derivative to achieve full water solubility. Secondly, the {Ru(bda)} fragment was embedded into supramolecular aggregates to generate more stable catalytic systems compared to a homogeneous reference complex. Therefore, the catalyst fragment was equipped with axial perylene bisimide (PBI) ligands, which facilitate self-assembly. Moreover, the influence of the different accessible aggregate morphologies on the catalytic performance has been investigated. N2 - Die katalytische Spaltung von Wasser in seine Elemente ist eine wichtige Reaktion für die Erzeugung von Wasserstoff als alternativem Brennstoff. Die Sauerstoff-erzeugende Halbreaktion gilt gemeinhin als Flaschenhals dieses Prozesses, weshalb effiziente Katalysatoren benötigt werden um die komplizierte Redoxchemie zu bewältigen. Die Natur als Vorbild lehrt uns, dass die Einbettung katalytisch aktiver Zentren in eine unterstützende Matrix dazu beitragen kann deren Leistung erheblich zu steigern. Ziel der vorliegenden Dissertation war daher die Etablierung neuartiger supramolekularer Ansätze zur Verbesserung der Wasseroxidationskatalyse. Als Katalysator-Leitmotiv diente das {Ru(bda)}-Fragment (bda = 2,2'-Bipyridin-6,6'-dicarboxylat). Zunächst wird die Synthese von Rutheniumkatalysatoren beschrieben, in denen drei {Ru(bda)}-Zentren in makrozyklischer Weise verknüpft sind. Durch die Verwendung von verbrückenden Bipyridin-Liganden unterschiedlicher Länge wurden metallosupramolekulare Makrozyklen mit verschiedenen Ringgrößen erhalten. Interessanterweise erwies sich eine mittlere Größe als optimal für die katalytische Wasseroxidation. Detaillierte kinetische, spektroskopische und theoretische Untersuchungen haben dazu beigetragen, den Reaktionsmechanismus zu identifizieren und die verschiedenen katalytischen Aktivitäten zu erklären. Darüber hinaus wurden löslichkeitsfördernde Seitenketten für den aktivsten Makrozyklus eingeführt, um eine vollständige Wasserlöslichkeit zu erreichen. Darüber hinaus wurde das {Ru(bda)}-Fragment in supramolekulare Aggregate eingebettet, um im Vergleich zu einem homogenen Referenzkomplex stabilere katalytische Systeme zu erzeugen. Dafür wurde das Katalysatorfragment mit axialen Perylenbisimid-Liganden ausgestattet, welche zur Selbstassemblierung neigen. In diesem Zusammenhang wurde der Einfluss der verschiedenen zugänglichen Aggregatmorphologien auf die katalytische Aktivität untersucht. KW - Ruthenium Komplexe KW - Metallosupramolekulare Chemie KW - Katalyse KW - Wasseroxidation KW - ruthenium complexes KW - metallosupramolecular chemistry KW - catalysis KW - water oxidation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154820 ER - TY - THES A1 - Tian, Yaming T1 - Selective C-X and C-H Borylation by N-Heterocyclic Carbene Nickel(0) Complex T1 - Selektive C-X und C-H Borylierung mittels N-Heterozyklischer Carben Nickel(0) Komplexe N2 - Organoboron compounds are important building blocks in organic synthesis, materials science, and drug discovery. The development of practical and convenient ways to synthesize boronate esters attracted significant interest. Photoinduced borylations originated with stoichiometric reactions of arenes and alkanes with well-defined metal-boryl complexes. Now photoredox-initiated borylations, catalyzed either by transition-metal or organic photocatalysts, and photochemical borylations with high efficiency have become a burgeoning area of research. In this chapter, we summarize research in the field of photocatalytic C-X borylation, especially emphasizing recent developments and trends, based on transition-metal catalysis, metal-free organocatalysis and direct photochemical activation. We focus on reaction mechanisms involving single electron transfer (SET), triplet energy transfer (TET), and other radical processes. We developed a highly selective photocatalytic C-F borylation method that employs a rhodium biphenyl complex as a triplet sensitizer and the nickel catalyst [Ni(IMes)2] (IMes = 1,3-dimesitylimidazolin-2-ylidene) for the C-F bond activation and defluoroborylation process. This tandem catalyst system operates with visible (400 nm) light and achieves borylation of a wide range of fluoroarenes with B2pin2 at room temperature in excellent yields and with high selectivity. Direct irradiation of the intermediary C-F bond oxidative addition product trans-[NiF(ArF)(IMes)2] leads to fast decomposition when B2pin2 is present. This destructive pathway can be bypassed by indirect excitation of the triplet states of the nickel(II) complex via the photoexcited rhodium biphenyl complex. Mechanistic studies suggest that the exceptionally long-lived triplet excited state of the Rh biphenyl complex used as the photosensitizer allows for efficient triplet energy transfer to trans-[NiF(ArF)(IMes)2], which leads to dissociation of one of the NHC ligands. This contrasts with the majority of current photocatalytic transformations, which employ transition metals as excited state single electron transfer agents. We have previously reported that C(arene)-F bond activation with [Ni(IMes)2] is facile at room temperature, but that the transmetalation step with B2pin2 is associated with a high energy barrier. Thus, this triplet energy transfer ultimately leads to a greatly enhanced rate constant for the transmetalation step and thus for the whole borylation process. While addition of a fluoride source such as CsF enhances the yield, it is not absolutely required. We attribute this yield-enhancing effect to (i) formation of an anionic adduct of B2pin2, i.e. FB2pin2-, as an efficient, much more nucleophilic {Bpin-} transfer reagent for the borylation/transmetalation process, and/or (ii) trapping of the Lewis acidic side product FBpin by formation of [F2Bpin]- to avoid the formation of a significant amount of NHC-FBpin and consequently of decomposition of {Ni(NHC)2} species in the reaction mixture. We reported a highly selective and general photo-induced C-Cl borylation protocol that employs [Ni(IMes)2] (IMes = 1,3-dimesitylimidazoline-2-ylidene) for the radical borylation of chloroarenes. This photo-induced system operates with visible light (400 nm) and achieves borylation of a wide range of chloroarenes with B2pin2 at room temperature in excellent yields and with high selectivity, thereby demonstrating its broad utility and functional group tolerance. Mechanistic investigations suggest that the borylation reactions proceed via a radical process. EPR studies demonstrate that [Ni(IMes)2] undergoes very fast chlorine atom abstraction from aryl chlorides to give [NiI(IMes)2Cl] and aryl radicals. Control experiments indicate that light promotes the reaction of [NiI(IMes)2Cl] with aryl chlorides generating additional aryl radicals and [NiII(IMes)2Cl2]. The aryl radicals react with an anionic sp2-sp3 diborane [B2pin2(OMe)]- formed from B2pin2 and KOMe to yield the corresponding borylation product and the [Bpin(OMe)]•- radical anion, which reduces [NiII(IMes)2Cl2] under irradiation to regenerate [NiI(IMes)2Cl] and [Ni(IMes)2] for the next catalytic cycle. A highly efficient and general protocol for traceless, directed C3-selective C-H borylation of indoles with [Ni(IMes)2] as the catalyst was achieved. Activation and borylation of N-H bonds by [Ni(IMes)2] is essential to install a Bpin moiety at the N-position as a traceless directing group, which enables the C3-selective borylation of C-H bonds. The N-Bpin group which is formed is easily converted in situ back to an N-H group by the oxidiative addition product of [Ni(IMes)2] and in situ-generated HBpin. The catalytic reactions are operationally simple, allowing borylation of of a variety of substituted indoles with B2pin2 in excellent yields and with high selectivity. The C-H borylation can be followed by Suzuki-Miyaura cross-coupling of the C-borylated indoles in an overall two-step, one-pot process providing an efficient method for synthesizing C3-functionalized heteroarenes. N2 - Es wurden effiziente und allgemeine Methoden für die selektive C-B-Verknüpfung mittels [Ni(IMes)2]-katalysierter Borylierungen von Arylfluoriden, Arylchloriden und substituierten Indolen entwickelt, welches alles leicht verfügbare Substrate sind. ... KW - Organoboron Compounds KW - N-Heterocyclic Carbene KW - Borylation KW - Photocatalysis KW - C-F KW - C-Cl KW - C-H KW - Nickel KW - Rhodium KW - Borylierung KW - Heterocyclische Carbene <-N> KW - Nickelkomplexe Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213004 ER - TY - THES A1 - Konieczka, Szymon Zbigniew T1 - Untersuchungen zu neuen polyhalogenierten Aminocarba-\(closo\)-dodecaboraten T1 - Investigations of new polyhalogenated aminocarba-\(closo\)-dodecaborates N2 - Die Arbeit umfasst zum einen Untersuchungen zu hochhalogenierten 1-Aminocarba-closo-dodecaboraten, zum anderen Untersuchungen zu hochfluorierten Aminocarba-closo-dodecaboraten mit einer an ein Boratom gebundenen Amino-Funktion. Außerdem wurden im diesem Zuge closo-Undecaborat-Cluster untersucht, da diese als interessante Ausgangsverbindungen für funktionalisierte {CB11}-Derivate eingesetzt werden können. N2 - In this work a number of nido- and closo-undecaborates are presented that can be used as potential precursors for Aufbau reactions of {closo-1-CB11} derivatives. One part deals with derivatives having one or more cyano groups bound to boron, such as salts of [7-NC-nido-B11H12]2–,[58] the synthesis of which was optimmized in this work. ... KW - carborane KW - borate KW - Halogenierte {CB11}-Cluster Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-122548 ER - TY - THES A1 - Brand, Johannes T1 - Darstellung und Untersuchung von niederkoordinierten Platinimino-, Platinoxo- und Platinalkylidenborylkomplexen T1 - Synthesis and investigation of low-coordinated platinum imino-, platinum oxo- and platinum alkylideneboryl complexes N2 - Diese Dissertation handelt von der Darstellung, Charakterisierung und Reaktivitätsuntersuchungen von neuartigen Platinalkylidenborylkomplexen und eines heteroleptischen Platiniminoborylkomplexes. Außerdem wurden Reaktivitätsuntersuchungen an einem Platinoxoborylkomplex durchgeführt und die erhaltenen Produkte wurden genau untersucht und charakterisiert. N2 - This dissertation is about the synthesis, characterisation and reactivity studies of new platinum alkylideneboryl complexes and a heteroleptic platinum iminoboryl complex. Furthermore reactivity studies of a platinum oxoboryl complex were carried out and the obtained products have been studied and characterised accurately. KW - Dreifachbindung KW - Doppelbindung KW - Iminogruppe KW - Oxoborane KW - alkylidengruppe KW - Alkylidenboryl komplexe KW - Iminoborylkomplexe KW - Oxoborylkomplexe Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112306 ER - TY - THES A1 - Geyer, Marcel T1 - Synthese und biologische Charakterisierung neuartiger siliciumorganischer Wirkstoffe sowie Synthese neuartiger siliciumorgansicher Synthese-Bausteine T1 - Synthesis and biological characterization of new silicon-containing drugs and synthesis of new silicon-containing building blocks for synthesis N2 - Aufbauend auf dem Konzept der C/Si-Bioisosterie beschreibt die vorliegende Arbeit die Synthese und biologische Charakterisierung siliciumorganischer Wirkstoffe sowie Beiträge zur Synthese von siliciumorganischen Synthese-Bausteinen unter Verwendung der Silicium-Schutzgruppen MOP (4-Methoxyphenyl), DMOP (2,6-Dimethoxyphenyl) und TMOP (2,4,6-Trimethoxyphenyl). Die entsprechenden Zielverbindungen sowie alle isolierten Zwischenstufen wurden durch NMR-Spektroskopie in Lösung (1H, 13C, 29Si) und Elementaranalyse (C, H, N) bzw. HRMS-Analytik (ESI) charakterisiert. Zusätzlich konnte in einigen Fällen eine strukturelle Charakterisierung durch Einkristall-Röntgenstrukturanalyse realisiert werden. N2 - Based on the concept “C/Si bioisosterism”, this doctoral thesis describes the synthesis and pharmacological characterization of silicon-containing drugs as well as contributions to the synthesis of silicon-containing building blocks containing the silicon protecting groups MOP (4-methoxyphenyl), DMOP (2,6-dimethoxyphenyl), and TMOP (2,4,6-trimethoxyphenyl). The identities of the respective target compounds and their isolated intermediates were established by NMR spectroscopic studies (1H, 13C, 29Si) and elemental analyses (C, H, N) or HRMS studies (ESI). In some cases, an additional characterization by single-crystal X-ray diffraction was performed. KW - Wirkstoff KW - siliciumorganische Wirkstoffe KW - Siliciumorganische Verbindungen KW - Silicium Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123766 ER - TY - THES A1 - Liu, Zhiqiang T1 - Fluorinated Aryl Boronates as Units in Organic Synthesis T1 - Fluorierte Arylboronate als Einheiten in organischer Synthese N2 - It is generally acknowledged that polyfluoroarenes are important fluorinated structural units for various organic molecules, such as pharmaceuticals, agrochemicals, and organic materials. Polyfluorinated aryl alkynes and alcohols are also powerful building blocks in chemical synthesis because of their versatility to be transformed into various useful molecules and also their ubiquity in natural product synthesis. Efficient methods for the synthesis of polyfluorinated aryl alkynes and alcohols are presented in Chapter 2 and Chapter 3. In addition, 3-amino-indoles have found a broad applications in medicinal chemistry as effective anticancer agents, compounds with analgesic properties and can function as potent inhibitors of tubulin polymerization, and agents for the prevention of type II diabetes. A simple method for the synthesis of 3-amino-indoles via the annulation reaction of polyfluorophenylboronates with DMF is reported in Chapter 4. Chapter 2 In Chapter 2, a mild process for the copper-catalyzed oxidative cross-coupling of electron-deficient polyfluorophenylboronate esters with terminal alkynes (Scheme S-1) is reported. This method displays good functional group tolerance and broad substrate scope, generating cross-coupled alkynyl(fluoro)arene products in moderate to excellent yields. This copper-catalyzed reaction was conducted on a gram scale to generate the corresponding product in good yield (72%). Scheme S-1. Copper-catalyzed oxidative cross-coupling of terminal alkynes with polyfluorophenylboronate esters. Based on previous reports and the aforementioned observations, a plausible catalytic cycle for this oxidative cross-coupling reaction is shown in Scheme S-2. The first step involves the addition of an alkynyl anion to Cu leading to the formation of alkynylcopper(II) species B. Subsequent transmetalation between ArFBpin and intermediate B occurs to form intermediate C. The desired product 3a is generated by eductive elimination. Finally, the oxidation of Cu(0) to Cu(II) with DDQ and Ag2O regenerates A to complete the catalytic cycle. Scheme S-2. Proposed mechanism of copper(II)-catalyzed oxidative cross-coupling between terminal alkynes and polyfluorophenylboronate esters. Chapter 3 In Chapter 3, A convenient and efficient protocol for the transition metal-free 1,2-addition of polyfluoroaryl boronate esters to aldehydes and ketones is reported, which provides secondary alcohols, tertiary alcohols, and ketones (Scheme S-3). The distinguishing features of this procedure include the employment of commercially available starting materials and the broad scope of the reaction with a wide variety of carbonyl compounds giving moderate to excellent yields. Scheme S-3. Base-promoted 1,2-addition of polyfluorophenylboronates to aldehydes and ketones. Control experiments were carried out to gain insight into the reaction mechanism. The reaction of 2a with pentafluorobenzene 5 under standard conditions was examined, yet 3a was not formed in any detectable amounts (Scheme S-4a), indicating that the C-Bpin moiety is essential and deprotonation of the fluoroarene or nucleophilic attack at the fluoroarene by the base is not a plausible pathway. Interestingly, for the standard reaction between 1a and 2a, the yield dropped dramatically if 18-crown-6 ether and K2CO3 were added (Scheme S-4b). This experimental result indicates that the presence of the potassium ion plays a crucial role for the outcome of the reaction. Furthermore, if the reaction of 1a and 2a was performed in the presence of only a catalytic amount of K2CO3 (20 mol%) (Scheme S-4c), reaction rates were reduced, and a week was required to produce 3a in good yield. This finding again indicates that the potassium ion (or the base) plays an important role in the reaction. Substituting ortho-fluorines by ortho-chlorines, using either C6Cl5Bpin 2,6-dichlorophenyl-1-Bpin as substrates, did not yield any product as shown by in situ GCMS studies. Scheme S-4. Control experiments. Based on DFT calculations, a mechanism for the 1,2-addition of polyfluorophenylboronates to aryl aldehydes in the presence of K2CO3 as base is proposed, as shown in Scheme S-5. K2CO3 interacts with the Lewis-acidic Bpin moiety of substrate 1 to generate base adduct A, which weakens the carbon-boron bond and ultimately cleaves the BC bond along with attachment of a potassium cation to the aryl group. The resulting ArF- anion adduct B undergoes nucleophilic attack at the aldehyde carbon atom of substrate 2 to generate methanolate C. The methanolate oxygen atom then attacks the electrophilic Bpin group to obtain compound D. Transfer of K2CO3 from intermediate D to the boron atom of the more Lewis-acidic polyfluorophenyl-Bpin 1 finally closes the cycle and regenerates complex A. Thus, the primary reaction product is the O-borylated addition product E, which was detected by HRMS and NMR spectroscopy for the perfluorinated derivative. Scheme S-5. Proposed mechanism of the 1,2-addition of polyfluorophenylboronates to aldehydes and ketones. Chapter 4 Chapter 4 presents a novel protocol for the transition metal-free addition and annulation of polyfluoroarylboronate esters to DMF, which provides 3-aminoindoles and tertiary amines in moderate to excellent yields (Scheme S-6). Scheme S-6. Annulation and addition reactions of polyfluorophenylboronates with DMF. While exploring the application of this strategy in synthesis, perfluorophenylBpin reacted smoothly with ethynylarenes and DMF to afford propargylamines with moderate to excellent yields (Scheme S-7). Scheme S-7. Three-component cross-coupling reaction for the synthesis of propargylamines. N2 - Polyfluorarene sind wichtige fluorierte Schlüsselstruktureinheiten für verschiedene organische Moleküle, wie z. B. Pharmazeutika, Agrochemikalien und organische Materialien. Auch polyfluorierte Arylalkine und -alkohole sind aufgrund ihrer vielseitigen Möglichkeiten, in verschiedene nützliche Moleküle umgewandelt zu werden als auch wegen ihrer Allgegenwart in der Naturstoffsynthese, leistungsfähige Bausteine. Effiziente Methoden zur Synthese polyfluorierter Arylalkine und -alkohole werden in Kapitel 2 und Kapitel 3 vorgestellt. Darüber hinaus haben 3-Amino-Indole eine breite Anwendung in der medizinischen Chemie als wirksame Antikrebsmittel, Verbindungen mit analgetischen Eigenschaften und als potente Inhibitoren der Tubulinpolymerisation sowie als Mittel zur Prävention von Typ-II-Diabetes gefunden. Eine einfache Methode zur Synthese von 3-Amino-Indolen über die Annulierungssreaktion von Polyfluorphenylboronaten mit DMF wird in Kapitel 4 berichtet. Kapitel 2 In Kapitel 2 wird über ein mildes Verfahren zur kupferkatalysierten oxidativen Kreuzkupplung von elektronenarmen Polyfluorphenylboronatestern mit terminalen Alkinen (Schema S-1) berichtet. Diese Methode zeichnet sich durch eine gute Toleranz gegenüber funktionellen Gruppen und eine große Bandbreite an Substraten aus und erzeugt kreuzgekoppelte Alkinyl(fluor)aren-Produkte in moderaten bis exzellenten Ausbeuten. Diese kupferkatalysierte Reaktion wurde im Gramm-Maßstab durchgeführt, und erzeugt das entsprechende Produkt in guter Ausbeute (72 %). Schema S-1. Kupfer-katalysierte oxidative Kreuzkupplung terminaler Alkine mit Polyfluorphenylboronatestern. Basierend auf früheren Arbeiten und den oben erwähnten Beobachtungen ist ein plausibler katalytischer Zyklus für diese oxidative Kreuzkupplungsreaktion in Schema S-2 dargestellt. Der erste Schritt beinhaltet die Addition eines Alkinylanions, was zur Bildung des Alkinylkupfer(II)-Komplexes B führen sollte. Anschließend erfolgt eine Transmetallierung zwischen ArFBpin und dem Zwischenprodukt B zur Bildung des Zwischenproduktes C. Das gewünschte Produkt 3a wirde dann daraus durch reduktive Eliminierung erzeugt. Durch eine Oxidation des dabei entstehenden Cu(0)-Komplexes mit DDQ und Ag2O wird Komplex A regeneriert und der katalytische Zyklus schließt sich. Schema S-2. Vorgeschlagener Mechanismus der Kupfer(II)-katalysierten oxidativen Kreuzkupplung terminaler Alkine und Polyfluorphenylboronatestern. Kapitel 3 In Kapitel 3 wird ein praktisches und effizientes Protokoll für die übergangsmetallfreie 1,2-Addition von Polyfluorarylboronatestern an Aldehyde und Ketone vorgestellt, welches sekundäre Alkohole, tertiäre Alkohole und Ketone liefert (Schema S-3). Die besonderen Merkmale dieses Verfahrens sind die Verwendung kommerziell erhältlicher Ausgangsmaterialien und die große Bandbreite der Reaktion mit einer Vielzahl von Carbonylverbindungen, die mäßige bis exzellente Ausbeuten erbringen. Schema S-3. Basen-unterstützte 1,2-Addition von Polyfluorphenylboronaten an Aldehyde und Ketone. Um einen Einblick in den Reaktionsmechanismus zu erhalten, wurden Kontrollexperimente durchgeführt. Die Reaktion von 2a mit Pentafluorbenzol 5 unter Standardbedingungen wurde untersucht, jedoch wurde 3a nicht in nachweisbaren Mengen gebildet (Schema S-4a). Dies deudet darauf hin, dass der C-Bpin Anteil essenziell ist und eine Deprotonierung des Fluorarens oder ein nukleophiler Angriff am Fluoraren durch die Base kein plausibler Weg ist. Interessanterweise sank bei der Standardreaktion zwischen 1a und 2a die Ausbeute dramatisch, wenn 18-Kronen-6-Ether und K2CO3 zugesetzt wurden (Schema S-4b). Dieses experimentelle Ergebnis belegt, dass die Anwesenheit des Kalium-Ions eine entscheidende Rolle für den Ausgang der Reaktion spielt. Wenn die Reaktion von 1a und 2a in Gegenwart von nur einer katalytischen Menge K2CO3 (20 mol%) durchgeführt wurde (Schema S-4c), waren die Reaktionsgeschwindigkeiten geringer und es war eine Woche erforderlich, um 3a in guter Ausbeute zu erlangen. Dieser Befund weist erneut darauf hin, dass das Kalium-Ion (oder die Base) eine wichtige Rolle bei der Reaktion spielt. Die Substitution von ortho-Fluorsubstituenten durch ortho-Chlorsubstituenten, wobei entweder C6Cl5Bpin oder 2,6-Dichlorphenyl-Bpin als Substrate verwendet wurden, lieferte kein Produkt, wie in situ GCMS-Studien zeigten. Schema S-4. Kontrollexperimente. Ein Vorschlag zum Mechanismus der 1,2-Addition von Polyfluorphenylboronaten an Arylaldehyde in Gegenwart von K2CO3 als Base wird in Schema S-5 vorgeschlagen. Dabei wechselwirkt die Base K2CO3 mit der Lewis-sauren Bpin-Einheit des Substrats 1 unter Ausbildung des Basenadduktes A, in welchem die Kohlenstoff-Bor-Bindung geschwächt ist und schließlich die B-C Bindung gespalteen wird, wobei sich ein Kaliumkation an die Arylgruppe anlagert. Das resultierende ArF- Anion im Addukt B greift nukleophil am Aldehyd-Kohlenstoffatom von Substrat 2 an, um Methanolat C zu erzeugen. Das Methanolat-Sauerstoffatom reagiert dann mit der elektrophilen Bpin-Gruppe, um Verbindung D zu erhalten. Die Übertragung von K2CO3 vom Zwischenprodukt D auf das Boratom des Lewis-acideren Polyfluorphenyl-Bpin 1 schließt schließlich den Zyklus und regeneriert den Komplex A. Das primäre Reaktionsprodukt ist also das O-borylierte Additionsprodukt E, das mittels HRMS und NMR-Spektroskopie für das perfluorierte Derivat nachgewiesen wurde. Schema S-5. Vorgeschlagener Mechanismus der 1,2-Addition von Polyfluorphenylboronaten an Aldehyden und Ketonen. Kapitel 4 In Kapitel 4 wird ein neuartiges Protokoll für die übergangsmetallfreie Addition und Annulierungsreaktion von Polyfluorarylboronatestern an DMF vorgestellt, das 3-Aminoindole und tertiäre Amine in mäßigen bis ausgezeichneten Ausbeuten liefert(Schema S-6). Schema S-6. Annulierungs- und Additionsreaktion von Polyfluorphenylboronaten mit DMF. Bei der Erkundung der Anwendung dieser Strategie in der Synthese konnten Propargylamine mit mäßigen bis ausgezeichneten Ausbeuten hergestellt werden (Schema S-7). Schema S-7. Kreuzkupplungsreaktion für die Synthese von Propargylaminen. KW - Fluorinated Aryl Boronates KW - Fluorierte Arylboronate Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245769 ER - TY - THES A1 - Würtemberger-Pietsch, Sabrina T1 - Anionic and Neutral Lewis-Base Adducts of Diboron(4) Compounds T1 - Anionische und Neutrale Lewis-Basen Addukte von Diboran(4)-Verbindungen N2 - Anionic Adducts Sp2-sp3 tetraalkoxy diboron compounds have gained attention due to the development of new, synthetically useful catalytic reactions either with or without transition-metals. Lewis-base adducts of the diboron(4) compounds were suggested as possible intermediates in Cu catalyzed borylation reactions some time ago. However, intermolecular adducts of tetraalkoxy diboron compounds have not been studied yet in great detail. In preliminary studies, we have synthesized a series of anionic sp2-sp3 adducts of B2pin2 with alkoxy-groups (L = [OMe]–, [OtBu]–), a phenoxy-group (L = [4-tBuC6H4O]–) and fluoride (L = [F]–, with [nBu4N]+ as the counter ion) as Lewis-bases. Neutral Adducts Since their isolation and characterization, applications of N-heterocyclic carbenes (NHCs) and related molecules, e.g., cyclic alkylaminocarbenes (CAACs) and acyclic diaminocarbenes (aDCs), have grown rapidly. Their use as ligands in homogeneous catalysis and directly in organocatalysis, including recently developed borylation reactions, is now well established. Recently, several examples of ring expansion reactions (RER) involving NHCs were reported to take place at elevated temperatures, involving Be, B, and Si. Furthermore, preliminary studies in the group of Marder et al. showed the presence of neutral sp2-sp3 diboron compounds with B2pin2 and the NHC Cy2Im. In this work, we focused on the synthesis and characterization of further neutral sp2-sp3 as well as sp3-sp3 diboron adducts with B2cat2 and B2neop2 and different NHCs. Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes. Whereas the mono-NHC adduct is stable for several hours at temperatures up to 60 °C, the bis-NHC adducts undergo thermally induced rearrangement to form the ring expanded products compound 26 and 27. B2neop2 is much more reactive than B2cat2 giving ring expanded product 29 at room temperature in quantitative yields, demonstrating that NHC ring expansion and B–B bond cleavage can be very facile processes. N2 - Im Rahmen der vorliegenden Arbeit wurde die Synthese und das Reaktionsverhalten Lewis-Säuren/Lewis-Basen-Addukte von Diboran(4)-Verbindungen als Lewis-Säuren untersucht. Als Lewis-Basen dienten zum einem das Fluorid-Ion, zum anderen N-Heterozyklische Carbene. Ein Ziel der vorliegenden Arbeit war somit die Synthese und Charakterisierung anionischer sp2-sp3-Diboran-Verbindungen des Typs [B2(OR)4F][NMe4] (OR2 = Pinakol, Catechol und Neopentyl), die auf ihre Eigenschaft als „Boryl-Übertragungsreagenz“ gegenüber Diazoniumsalzen überprüft wurden. Der zweite Teil der Arbeit untersucht die Reaktion von Diboranen (B2cat2 und B2neop2) mit gesättigten und ungesättigten N-Heterozyklischen Carbenen (NHCs). Die neutralen, einfach- und zweifach-substituierten NHC-Addukte des Typs B2(OR)4•NHC und B2(OR)4•(NHC)2 wurden anschließend auf ihre thermische Stabilität untersucht. Die Ergebnisse dieser Arbeit zeigen zum einem, dass anionische Addukte des Typs [B2(OR)4F][NMe4] 4, 7 und 9 als „Boryl-Übertragungsreagenzien“ eingesetzt werden können. Ferner lassen sich ausgehend von Diboran(4)-Verbindungen durch die Umsetzung mit N Heterozyklischen Carbenen die einfach- und zweifach-substituierten NHC-Addukte B2(OR)4•NHC und B2(OR)4•(NHC)2 synthetisieren. Diese sind zum Teil instabil gegenüber einer Ringerweiterungsreaktion unter Insertion einer Boryleinheit in die C–N-Bindung des Carbens. Untersuchungen an NHC-Addukten von Boranen BR3 und HB(OR)2 zeigen weiterhin, dass die Addukte Ph3B•NHC gegenüber solchen Ringerweiterungen stabil sind. Die Addukte HB(OR)2•NHC sind je nach eingesetztem Carben und Boran entweder stabil oder reagieren unter B–H-Bindungsaktivierung zur Ringerweiterung des Carbens. KW - Addukt KW - Diborane KW - carben KW - Lewis-Base Adducts KW - Diboron(4) Compounds KW - Ring Expansion Reaction Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136321 ER - TY - THES A1 - Hering, Florian T1 - Sterische und elektronische Stabilisierung niedervalenter Übergangsmetallverbindungen durch N-heterocyclische Carbene T1 - Steric and Electronic Stabilization of Low-valent Transition Metal Complexes by N-heterocyclic Carbenes N2 - Diese Arbeit zeigt die vielfältigen Einsatzmöglichkeiten des Pr*-Substituenten in Koordinationsverbindungen mit sterisch stark abgeschirmten Molekülzentren auf. So wurden neben dem N-heterocyclischen Carben IPr* auch dessen Vorläuferverbindungen Pr*NH2 in Imidokomplexen sowie Pr*DAB zur Stabilisierung von Übergangsmetall- und Hauptgruppenelementverbindungen als Liganden etabliert. Die homoleptisch zweifach NHC-substituierten Komplexe [Pd(IiPr)2] sowie [Pt(IiPr)2] sind synthetisch zugänglich und im Gegensatz zu {Ni(IiPr)2} in Substanz isolierbar. Obwohl es sich bei [Pd(IiPr)2] und [Pt(IiPr)2] um niedervalente 14-Elektronenverbindungen handelt, weisen deren Addukte von Neutralliganden teils bemerkenswerte Labilität auf. Im Gegensatz dazu zeichnen sich beide Komplexe durch eine starke Neigung zur oxidativen Addition verschiedenster Substrate unter Ausbildung quadratisch-planarer Metall(II)-Verbindungen aus. So wurden in stöchiometrischen Reaktionen H–H, C–H, C–X, Si–H, B-H, B–B, P–H und P–P gespalten und die entsprechenden Aktivierungsprodukte charakterisiert. N2 - The present work showcases the versatile applications of Pr* as a sterically demanding substituent. Aside from the N-heterocyclic carbene IPr*, its precursors Pr*NH2, in imido complexes, and Pr*DAB, in diazabutadiene compounds of transition metals as well as main group elements, were established as ligands in coordination chemistry. The homoleptic two-fold NHC-substituted complexes [Pd(IiPr)2] and [Pt(IiPr)2] are synthetically accessible and, in contrast to the fragment {Ni(IiPr)2}, isolable compounds. Despite being low-valent 14-electron compounds, the addition of further neutral ligands to [Pd(IiPr)2] and [Pt(IiPr)2] is only slightly favored and the resulting complexes mostly decompose upon isolation. However, both compounds readily undergo oxidative addition a range of organic and inorganic substrates. In stoichiometric reactions H–H, C–H, C–X, Si–H, B–H, B–B, P–H and P–P bonds were successfully activated. KW - Platinkomplexe KW - Bindungsaktivierung KW - Sterische Hinderung KW - NHC KW - Bindungsaktivierung KW - Platinkomplex KW - sterisch anspruchsvolle Liganden KW - bulky ligands KW - bond activation KW - platinum complex KW - Heterocyclische Carbene <-N> KW - Übergangsmetallverbindungen Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-107317 ER - TY - THES A1 - Schmidt, David T1 - N-Heterocyclische Carbene und NHC stabilisierte Nickelkomplexe in der Aktivierung von Element-Element- und Element-Wasserstoff-Bindungen T1 - N-Heterocyclic carbenes and NHC-stabilized nickel complexes in the activation of element-element- and element-hydrogen-bonds N2 - Die vorliegende Arbeit befasst sich sowohl mit der stöchiometrischen als auch mit der katalytischen Aktivierung von Element-Element-Bindungen an NHC-stabilisierten Nickel(0) Komplexen. N2 - The present work is concerned with investigations of stoichiometric and catalytic element-element bond activation with NHC-stabilized nickel(0) complexes KW - Nickelkomplexe KW - Catalysis KW - Element-Element-Activation KW - Bond Activation KW - P-H-Activation KW - C-C- Activation KW - Si-H- Activation KW - Main Group-Element-Chemistry KW - Ring Expansion KW - Dehydrogenative Coupling KW - Dehydrogenative Kupplung KW - Ringerweiterung KW - Hauptgruppen-Element-Chemie KW - Si-H-Aktivierung KW - C-C-Aktivierung KW - P-H-Aktivierung KW - Bindungsaktivierung KW - Element-Element-Aktivierung KW - Katalyse KW - Nickel KW - Heterocyclische Carbene <-N> KW - Chemische Bindung KW - NHC Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-90141 ER - TY - THES A1 - Philipp, Michael Stephan Maria T1 - N-Heterocyclic Carbenes and Cyclic (Alkyl)(amino)carbenes as Ligands for p-Block Element Compounds T1 - N-Heterocyclische Carbene und Cyclische (Alkyl)(amino)carbene als Liganden für p-Block-Element-Verbindungen N2 - In der vorliegenden Arbeit wird die Synthese und Reaktivität neuer NHC- und cAAC-stabilisierter Lewis-Säure/Lewis-Base-Addukte von Verbindungen mit Elementen der Gruppen 14 und 15 beschrieben. N2 - This thesis reports on synthesis and reactivity of new NHC- and cAAC-stabilized Lewis-acid/Lewis-base adducts of group 14 and group 15 element compounds. KW - Lewis-Addukt KW - Heterocyclische Carbene <-N> KW - NHC KW - cAAC KW - p-Block Elements Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289295 ER - TY - THES A1 - Kerpen, Christoph T1 - – CYANOBORATE – Salze reaktiver Kationen sowie Übergangsmetallverbindungen T1 - – CYANOBORATES – Salts of reactive cations and transition metal compounds N2 - Die hier vorliegende Arbeit behandelt die Synthese und Charakterisierung neuer Übergangsmetall-Borate sowie auf Cyanoborat-Anionen basierende Übergangsmetallkomplexe und Koordinationsverbindungen mit N-Donor-Liganden und Triphenylphosphan. N2 - This work outlines the synthesis and characterization of novel transition metal borates as well as transition metal complexes based on cyanoborate anions and coordination compounds with N-donor ligands and triphenylphosphine. KW - borate KW - Transition metal KW - Cyanoborate KW - Übergangsmetallverbindungen KW - Cyclovoltammetrie KW - Phosphankomplexe KW - Koordinationspolymere Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163974 ER - TY - THES A1 - Kuntze-Fechner, Maximilian Wolfgang T1 - Reaktivität NHC-stabilisierter Nickel(0)-Komplexe in der C–F-Bindungsaktivierung von Polyfluoraromaten T1 - Reactivity of NHC-stabilized nickel(0) complexes in the C–F bond activation of polyfluoroarenes N2 - Die vorliegende Arbeit befasst sich mit der C–F Bindungsaktivierung von teil und perfluorierten Aromaten an NHC stabilisierten Nickel(0) Komplexen, sowohl in stöchiometrischen als auch in katalytischen Reaktionen. Der Fokus dieser Arbeit lag auf der Aufklärung der Mechanismen der C–F Bindungsaktivierungsschritte von teil und perfluorierten Aromaten an ein und zweifach NHC stabilisierten Nickel(0) Komplexen, auf dem Einsatz dieser Komplexe in katalytischen Kreuzkupplungs- und Borylierungsreaktionen sowie in der Aufklärung der Mechanismen solcher katalytischen Prozesse. Die im Rahmen dieser Arbeit erzielten Ergebnisse belegen wesentliche Unterschiede im Reaktionsverhalten von Nickel Komplexen in der C–F Bindungsaktivierung: Die Reaktionsmechanismen der mit zwei sterisch unterschiedlich anspruchsvollen NHC Liganden stabilisierten Nickel(0) Komplexe [Ni(iPr2Im)2] (1a) und [Ni(Mes2Im)2] (5) weisen deutliche Unterschiede auf. So erfolgt die Insertion von [Ni(iPr2Im)2] (1a), dem Komplex mit dem weniger anspruchsvolleren Carbenliganden iPr2Im, in die C–F-Bindung von C6F6 nach einem konzertierten und/oder NHC assistierten Reaktionsmechanismus, wohingegen der Nickel(0) Komplex 5 nach einem radikalischen und/oder NHC assistierten Reaktionsmechanismus insertiert. Die Experimente am einfach NHC stabilisierten Nickel(0) Komplex [Ni(Dipp2Im)(η6 C7H8)] 6 belegen, dass die C–F Bindungsaktivierung zunächst zu reaktiven mononuklearen Komplexen [Ni(Dipp2Im)(F)(ArF)] führt, die jedoch allmählich zu dinuklearen, Fluorido verbrückten Nickel(II) Komplexen dimerisieren, die katalytisch nicht aktiv sind. Erst die Aufspaltung dieser Dimere in mononukleare Komplexe mit terminalen Fluoridoliganden führt zur katalytischen Aktivität. Dabei hat sich gezeigt, dass 5 und 6 vergleichbar gute Katalysatoren in der Nickel vermittelten C–F Borylierung sind und der kritische Schritt der Katalyse die Bereitstellung eines katalytisch aktiven, dreifach koordinierten Nickel Komplexes der Form [Ni(NHC)(F)(ArF)] ist. N2 - The present work concerns the stoichiometric and catalytic C–F bond activation of partially and perfluorinated arenes with NHC nickel(0) complexes. A particular emphasis was placed on mechanistic investigations concerning the C–F bond activation step of these processes. Furthermore, the application of these complexes in catalytic cross-coupling and borylation reactions, was investigated, including mechanistic studies. The results obtained in this thesis demonstrate significant differences in the reaction behavior of nickel complexes in C–F bond activation: The reaction mechanism of the nickel(0) complexes [Ni(iPr2Im)2] (1a) and [Ni(Mes2Im)2] (5) stabilized by two NHC ligands with varying steric demands show clear differences. [Ni(iPr2Im)2] (1a), the complex with the less demanding carbene ligand, iPr2Im, inserts into the C–F bond of C6F6 by a concerted and/or NHC assisted reaction mechanism, whereas the nickel(0) complex 5 inserts according to a radical and/or NHC assisted reaction mechanism. The studies on the single NHC stabilized nickel(0) complex Ni(Dipp2Im)(η6 C7H8)] (6) show that C–F bond activation initially leads to reactive, mononuclear complexes of the type [Ni(Dipp2Im)(F)(ArF)], which dimerize to dinuclear, fluorido bridged nickel(II) complexes that are not catalytically active. Only cleavage of these dimers into mononuclear complexes with terminal fluorido ligands leads to catalytic activity. It was shown that 5 and 6 are comparatively good catalysts in the nickel mediated C–F bond borylation and the critical step in the catalysis is the provision of a catalytically active, three coordinated nickel complex of the type [Ni(NHC)(F)(ArF)]. KW - Borylierung KW - Aktivierung KW - Katalyse KW - NHC KW - C-F-Bindungsaktivierung KW - C-F Borylierung KW - Nickel-Komplexe KW - C-F bond activation KW - nickel KW - C-F borylation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-211597 ER - TY - THES A1 - Hennig, Philipp Thomas T1 - Synthese, Charakterisierung und Eigenschaften neuartiger Mono- und Bis-Pentafluorethylborate sowie Pentafluorethylboran-Addukte T1 - Synthesis, characterisation and propterties of new mono- and bis-pentafluoroethylborates as well as pentafluoroethylborane-adducts N2 - Diese Arbeit beschäftigt sich mit der Synthese, Charakterisierung und Eigeschaften neuer Monopentafluorethylborat-Anionen der Form [C2F5BH2X]- (X= F, Cl, Br), [C2F5BH2(CN)]-, [C2F5BH(CN)2]-, [C2F5BH(CN)X]- (X= F, Cl, Br) und [C2F5B(CN)X2]- (X= Cl, Br)sowie den Bis-pentafluorethylborat-Anionen [(C2F5)2B(OMe)(CN)]-, [(C2F5)2BF(CN)]- und [(C2F5)2B(CN)2]-. Von einigen dieser Verbindungen wurden Ionische Flüssigkeiten basierend auf dem 1-Ethyl-3-methylimidazolium-Kation synthetisiert und deren physikalischen Parameter ausführlich untersucht. Zudem wurden Pentafluorethylboran-Addukte mit verschiedenen Lewis-Basen der Form C2F5BH2-L (L= THF, SMe2, CH3CN, Pyridin, PPh3, CAAC, IDipp, SIDipp, Me4Im, (iPr)2Me2Im, tBu2Im) hergestellt welche zum Teil als Startmaterialien für die Synthese von Monopentafluorethylboraten verwendet wurden. N2 - In this work, syntheses, characterisation and properties of new monopentafluoroethylborate anions like [C2F5BH2X]- (X= F, Cl, Br), [C2F5BH2(CN)]-, [C2F5BH(CN)2]-, [C2F5BH(CN)X]- (X= F, Cl, Br) and [C2F5B(CN)X2]- (X= Cl, Br) as well as bis-pentafluoroethylborate anions [(C2F5)2B(OMe)(CN)]-, [(C2F5)2BF(CN)]- and [(C2F5)2B(CN)2]- are presented. Furthermore, several of these compounds were transformed into Ionic Liquids by isolation of the corresponding 1-ethyl-3-methylimidazolium salt and their physical propterties were studied in detail. Besides, pentafluoroethylborane adducts with different lewis bases like C2F5BH2-L (L=thf, SMe2, CH3CN, pyridin, PPh3, CAAC, IDipp, SIDipp, Me4Im, (iPr)2Me2Im, tBu2Im) were synthesized which turned out to be good starting materials for the synthesis of monopentafluoroethylborates. KW - Borate KW - Pentafluorethylgruppe KW - Hydridogruppe KW - Viskosität KW - Elektrische Leitfähigkeit KW - Mono-Pentafluorethylborate KW - Bis-Pentafluorethylborate KW - Pentafluorethylboran-Addukte KW - Ionische Flüssigkeiten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-192899 ER - TY - THES A1 - Paul, Ursula Sofia Désirée T1 - Studies on the Reactivity of Iridium Bis(phosphinite) Pincer Complexes towards Phosphines, Boranes and their Lewis Adducts and on the Reactivity of Cyclic (Alkyl)(Amino) Carbenes and Nickel Complexes thereof T1 - Studien hinsichtlich der Reaktivität von Iridium bis(phosphinit)-Pincerkomplexen gegenüber Phosphanen, Boranen und deren Lewis Addukten und bezüglich der Reaktivität von zyklischen (Alkyl)(Amino) Carbenen und Nickelkomplexen davon N2 - The first part of the present work provides an insight into the chemistry of iridium complexes bearing the bis(phosphinite) pincer ligand tBuPOCOP (k3-C6H3-1,3-(OPtBu2)2) towards primary boranes and phosphines as well as phosphine-borane Lewis adducts. It furthermore encloses some more detailed studies on their application as catalyst for the dehydrogenative coupling of the latter compounds. The results presented herein can be divided into three sections: I. synthesis and characterization of aryl dihydroborate ligated iridium(III) complexes II. and aryl phosphine coordinated iridium(I) and dihydrido iridium(III) complexes, III. as well as studies on the reactivity of the parent iridium pincer complexes towards BH3 adducts of primary phosphines, which led to first results in the homogeneous catalytic dehydrocoupling of P-aryl substituted phosphine boranes mediated by such iridium pincer complexes. The second part of the present work provides an insight into the chemistry of cyclic (alkyl)(amino) carbene-stabilized nickel complexes as well as it encloses some more detailed studies on the properties and reactivity of the free carbenes itself. The results presented herein can be divided into four sections: I. synthesis and characterization of cyclic (alkyl)(amino) carbene-stabilized nickel carbonyl complexes, II. which allow the evaluation and quantification of the steric and electronic properties of these cyclic (alkyl)(amino) carbenes, III. first studies on the reactivity of these novel nickel complexes, and IV. investigations on C–F and C–H bond activation at the carbene center of cyclic (alkyl)(amino) carbenes. N2 - Der erste Abschnitt der vorliegenden Arbeit gibt einen vertieften Einblick in die Reaktivität von Iridiumkomplexen, die den bis(Phosphinit)-Pincer tBuPOCOP (k3-C6H3-1,3-(OPtBu2)2) als Liganden aufweisen, gegenüber primären Boranen und Phosphanen sowie gegenüber Phosphan-Boran-Lewis-Paaren. Desweiteren sind detailliertere Untersuchungen zu deren Anwendung als Katalysator zur dehydrogenativen Kupplung von Phosphanboranen enthalten. Die erhaltenen Ergebnisse lassen sich in drei Teilbereiche gliedern: I. Synthese und Charakterisierung von Iridium(III)-Komplexen, die Aryldihydroboratliganden tragen, II. Arylphosphan-koordinierte Iridium(I)- und Iridium(III)-Komplexe, III. sowie Studien zur Reaktivität der zugrundeliegenden Iridiumpincerkomplexe gegenüber BH3-Addukten von primären Phosphanen. Diese führten zu ersten Ergebnissen in der homogen-katalytischen Dehydrokupplung von Phosphanboranen unter Verwendung der Iridiumpincerkomplexe als Katalysator. Der zweite Abschnitt der vorliegenden Arbeit gibt einen Einblick in die Chemie von Nickelkomplexen, die durch zyklische (Alkyl)(Amino) Carbene (cAACs) stabilisiert werden. Desweiteren sind Untersuchungen zu den Eigenschaften und zur Reaktivität der freien Carbene selbst enthalten. Die erhaltenen Ergebnisse lassen sich in vier Teilbereiche gliedern: I. Synthese und Charakterisierung von Nickelkomplexen, die durch zyklische (Alkyl)(Amino) Carbene stabilisiert werden, II. welche die Bestimmung und Quantifizierung von deren sterischen und elektronischen Eigenschaften zulassen, III. erste Studien zur Reaktivität dieser neuartigen Nickelkomplexe, sowie IV. Untersuchungen zur C–F- und C–H-Bindungsaktivierung am Carbenkohlenstoffatom der entsprechenden zyklische (Alkyl)(Amino) Carbene. KW - Iridiumkomplexe KW - Iridium bis(phosphinite) pincer complexes KW - cyclic (alkyl)(amino) carbenes KW - carbene-stabilized nickel complexes KW - Nickelkomplexe KW - Metallorganische Chemie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151963 ER - TY - THES A1 - Schneider, Heidi T1 - N-heterocyclische Carbene als Komplex-Liganden in der Chemie des Eisens sowie als Reagenzien in der Chemie der Hauptgruppenelemente T1 - N-heterocyclic carbenes as complex ligands in the chemistry of iron and as reagents in the chemistry of main group elements N2 - Die vorliegende Arbeit ist in zwei Teile gegliedert und befasst sich im ersten Abschnitt mit der stöchiometrischen und katalytischen Aktivierung von Element-Element-Bindungen an NHC-stabilisierten Eisen(II)-Komplexen. Im Fokus der Untersuchungen steht hierbei sowohl die Isolierung und Charakterisierung neuartiger NHC-stabilisierter Eisen-Komplexe sowie deren Nutzung als Katalysatoren in der Hydrosilylierung von Carbonylverbindungen und der Hydrophosphanierung von Mehrfachbindungssystemen. Der zweite Teil dieser Arbeit ist der Reaktivität N-heterocyclischer Carbene gegenüber Hauptgruppenelement-Verbindungen wie beispielsweise Chlorsilanen, Stannanen, Phosphanen und Alanen gewidmet. Neben der Aufklärung mechanistischer Details der Reaktionen ist die übergangsmetallfreie Hydrodefluorierung von Fluoraromaten zentraler Bestandteil dieser Untersuchungen. N2 - The present thesis is divided into two parts, the first of which is concerned with the stoichiometric and catalytic activation of element-element bonds at NHC-stabilized iron(II) complexes. The focus of these investigations is on the isolation and characterization of novel NHC-stabilized iron complexes and on their utilization as catalysts in the hydrosilylation of carbonyl compounds, as well as in the hydrophosphination of unsaturated hydrocarbons. The second part of this thesis addresses the reactivity of N-heterocyclic carbenes towards main-group element compounds such as chlorosilanes, stannanes, phosphines and alanes. Besides the elucidation of mechanistic details, the transition-metal-free hydrodefluorination of fluorinated aromatic compounds is a central part of this work KW - N-heterocyclische Carbene KW - NHC-stabilisierte Eisen-Komplexe KW - NHC-stabilisierte Chlorosilane KW - NHC-Phosphiniden Addukte KW - NHC-stabilisierte Alane KW - NHC-stabilized iron complexes KW - NHC-stabilized chloro silanes KW - NHC-stabilized alanes KW - NHC-phosphinidene Komplexes Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-155422 ER - TY - THES A1 - Budiman, Yudha Prawira T1 - Applications of Fluorinated Aryl Boronates in Organic Synthesis T1 - Die Anwendungen von fluorinierten Arylboronaten in der organischen Synthese N2 - Fluorinated compounds are an important motif, particularly in pharmaceuticals, as one-third of the top performing drugs have fluorine in their structures. Fluorinated biaryls also have numerous applications in areas such as material science, agriculture, crystal engineering, supramolecular chemistry, etc. Thus, the development of new synthetic routes to fluorinated chemical compounds is an important area of current research. One promising method is the borylation of suitable precursors to generate fluorinated aryl boronates as versatile building blocks for organic synthesis. Chapter 1 In this chapter, the latest developments in the synthesis, stability issues, and applications of fluorinated aryl boronates in organic synthesis are reviewed. The catalytic synthesis of fluorinated aryl boronates using different methods, such as C–H, C–F, and C–X (X = Cl, Br, I, OTf) borylations are discussed. Further studies covering instability issues of the fluorinated boronate derivatives, which are accelerated by ortho-fluorine, have been reported, and the applications of these substrates, therefore, need special treatment. Numerous groups have reported methods to employ highly fluorinated aryl boronates that anticipate the protodeboronation issue; thus, polyfluorinated aryl boronates, especially those containing ortho-fluorine substituents, can be converted into chloride, bromide, iodide, phenol, carboxylic acid, nitro, cyano, methyl esters, and aldehyde analogues. These substrates can be applied in many cross-coupling reactions, such as the Suzuki-Miyaura reaction with aryl halides, the Chan-Evans-Lam C–N reaction with aryl amines or nitrosoarenes, C–C(O) reactions with N-(aryl-carbonyloxy)phthalamides or thiol esters (Liebskind-Srogl cross-coupling), and oxidative coupling reactions with terminal alkynes. Furthermore, the difficult reductive elimination from the highly stable complex [PdL2(2,6-C6F2+nH3-n)2] was the next challenge to be targeted in the homocoupling of 2,6-di-fluoro aryl pinacol boronates, and it has been solved by conducting the reaction in arene solvents that reduce the energy barrier in this step as long as no coordinating solvent or ancillary ligand is employed. Chapter 2 In this chapter, phenanthroline-ligated copper complexes proved to be efficient catalysts for the Suzuki-Miyaura cross-coupling of highly fluorinated aryl boronate esters (ArF–Bpin) with aryl iodides or bromides. This newly developed method is an attractive alternative to the traditional methods as copper is an Earth-abundant metal, less toxic, and cheaper compared to the traditional methods which commonly required palladium catalysts, and silver oxide that is also often required in stoichiometric amounts. A combination of 10 mol% copper iodide and 10 mol% phenanthroline, with CsF as a base, in DMF, at 130 ˚C, for 18 hours is efficient to cross-couple fluorinated aryl pinacol boronates with aryl iodides to generate cross-coupled products in good to excellent yields. This method is also viable for polyfluorophenyl borate salts such as pentafluorophenyl-BF3K. Notably, employing aryl bromides instead of aryl iodides for the coupling with fluorinated aryl–Bpin compounds is also possible; however, increased amounts of CuI/phenanthroline catalyst is necessary, in a mixture of DMF and toluene (1:1). A diverse range of π···π stacking interactions is observed in the cross-coupling products partly perfluorinated biaryl crystals. They range from arene–perfluoroarene interactions (2-(perfluorophenyl)naphthalene and 2,3,4-trifluorobiphenyl) to arene–arene (9-perfluorophenyl)anthracene) and perfluoroarene–perfluoroarene (2,3,4,5,6-pentafluoro-2’methylbiphenyl) interactions. Chapter 3 In this chapter, the efficient Pd-catalyzed homocoupling reaction of aryl pinacol pinacol boronates (ArF–Bpin) that contain two ortho-fluorines is presented. The reaction must be conducted in a “noncoordinating” solvent such as toluene, benzene, or m-xylene and, notably, stronger coordinating solvents or ancillary ligands have to be avoided. Thus, the Pd center becomes more electron deficient and the reductive elimination becomes more favorable. The Pd-catalyzed homocoupling reaction of di-ortho-fluorinated aryl boronate derivatives is difficult in strongly coordinating solvents or in the presence of strong ancillary ligands, as the reaction stops at the [PdL2(2,6-C6F2+nH3-n)2] stage after the transmetalations without the reductive elimination taking place. It is known that the rate of reductive elimination of Ar–Ar from [ML2(Ar)(Ar)] complexes containing group-10 metals decreases in the order Arrich–Arpoor > Arrich–Arrich > Arpoor–Arpoor. Furthermore, reductive elimination of the most electron-poor diaryls, such as C6F5–C6F5, from [PdL2(C6F5)2] complexes is difficult and has been a challenge for 50 years, due to their high stability as the Pd–Caryl bond is strong. Thus, the Pd-catalyzed homocoupling of perfluoro phenyl boronates is found to be rather difficult.   Further investigation showed that stoichiometric reactions of C6F5Bpin, 2,4,6-trifluorophenyl–Bpin, or 2,6-difluorophenyl–Bpin with palladium acetate in MeCN stops at the double transmetalation step, as demonstrated by the isolation of cis-[Pd(MeCN)2(C6F5)2], cis-[Pd(MeCN)2(2,4,6-C6F3H2)2], and cis-[Pd(MeCN)2(2,6-C6F2H3)2] in quantitative yields. Thus, it can be concluded that the reductive elimination from diaryl-palladium complexes containing two ortho-fluorines in both aryl rings, is difficult even in a weakly coordinating solvent such as MeCN. Therefore, even less coordinating solvents are needed to make the Pd center more electron deficient. Reactions using “noncoordinating” arene solvents such as toluene, benzene, or m-xylene were conducted and found to be effective for the catalytic homocoupling of 2,6-C6F2+nH3-nBpin. The scope of the reactions was expanded. Using toluene as the solvent, the palladium-catalyzed homocoupling of ArF–Bpin derivatives containing one, two or no ortho-fluorines gave the coupled products in excellent yields without any difficulties. DFT calculations at the B3LYP-D3/def2-TZVP/6-311+g(2d,p)/IEFPCM // B3LYP-D3/SDD/6-31g**/IEFPCM level of theory predicted an exergonic process and lower barrier (< 21 kcal/mol) for the reductive elimination of Pd(C6F5)2 complexes bearing arene ligands, compared to stronger coordinating solvents (acetonitrile, THF, SMe2, and PMe3), which have high barriers ( > 33.7 kcal/mol). Reductive elimination from [Pd(ηn-Ar)(C6F5)2] complexes have low barriers due to: (i) ring slippage of the arene ligand as a hapticity change from η6 in the reactant to ηn (n ≤ 3) in the transition state and the product, which led to less σ-repulsion; and (ii) more favorable π-back-bonding from Pd(ArF)2 to the arene fragment in the transition state. Chapter 4 In this chapter, the efficient Pd-catalyzed C–Cl borylation of aryl chlorides containing two ortho-fluorines is presented. The reactions are conducted under base-free conditions to prevent the decomposition of the di-ortho-fluorinated aryl boronates, which are unstable in the presence of base. A combination of Pd(dba)2 (dba = dibenzylideneacetone) with SPhos (2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl) as a ligand is efficient to catalyze the C–Cl borylation of aryl chlorides containing two ortho-fluorine substituents without base, and the products were isolated in excellent yields. The substrate scope can be expanded to aryl chloride containing one or no ortho-fluorines and the borylated products were isolated in good to very good yield. This method provides a nice alternative to traditional methodologies using lithium or Grignard reagents. N2 - Fluorierte Verbindungen sind insbesondere in der Pharmazie wichtige Bausteine, da ein Drittel der wirksamen Medikamente Fluorsubstituenten beinhalten. Fluorierte Biaryle haben auch zahlreiche Anwendungen in Bereichen wie der Materialwissenschaft, der Landwirtschaft, dem Design molekularer Festkörperstrukturen, der supramolekularen Chemie etc. Daher ist die Entwicklung neuer synthetischer Wege zu fluorierten chemischen Verbindungen sehr gefragt. Eine der vielversprechenden Methoden ist die Borylierung geeigneter Vorstufen zur Erzeugung fluorierter Arylboronate, die als vielseitige Bausteine für die organische Synthese dienen können. ... KW - Chemistry KW - Homogeneous Catalysis KW - borylation KW - boronates KW - fluorine KW - C-C coupling KW - Homogene Katalyse KW - Borylierung KW - Fluorierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-217579 ER - TY - THES A1 - Krahfuß, Mirjam Julia T1 - N-Heterocyclic Silylenes as ambiphilic Reagents in Main Group Chemistry and as Ligands in Transition Metal Chemistry T1 - N-Heterocyclische Silylene als ambiphile Reagenzien in der Hauptgruppenchemie und als Liganden in der Übergangsmetallchemie N2 - This thesis reports on the applications of a particular N-heterocyclic silylene, Dipp2NHSi (1), as an ambiphilic reagent in main group chemistry and as a ligand in transition metal chemistry. One focus of the work lies in the evaluation of the differences in the reactivity of N-heterocyclic silylenes in main group element and transition metal chemistry in comparison with the in these areas nowadays ubiquitous N-heterocyclic carbenes. The first chapter gives an insight into the reactivity of Dipp2NHSi with respect to different types of main group element compounds. Silylene 1 was reacted with group 13 compounds. Adduct formation was observed with AlI3, Al(C6F5)3 and B(C6F5)3 which led to isolation of Dipp2NHSi·AlI3 (2), Dipp2NHSi·Al(C6F5)3 (3) and Dipp2NHSi·B(C6F5)3 (4). Furthermore, the reactivity of Dipp2NHSi (1) with respect to different elementhalide bonds was investigated. The reaction with elemental bromine and iodine leads to the dihalosilanes Dipp2NHSiBr2 (5) and Dipp2NHSiI2 (6). Utilizing methyl iodide, benzyl chloride and benzyl bromide, the insertion products Dipp2NHSi(I)(Me) (10), Dipp2NHSi(Cl)(benzyl) (11) and Dipp2NHSi(Br)(benzyl) (12) are obtained. Thus, insertion is preferred to reductive coupling with formation of RH2C–CH2R (R = H, Ph) and the corresponding dihalosilane. The reaction of 1 with Me3SnCl leads to the diazabutene {(Me3Sn)N(Dipp)CH}2 (9). The reaction of 1 with Ph2SnCl2 gives exclusively Dipp2NHSiCl2 (8) and cyclic polystannanes (Ph2Sn)n. The reactivity of 1 towards selected 1,3-dipolar compounds was also examined and Dipp2NHSi was reacted with azides of different size. The reaction with adamantyl azide led to the formation of the tetrazoline 13. For the reaction with the sterically less demanding trimethylsilyl azide the azido silane Dipp2NHSi(N(SiMe3)2)(N3) (14) and the degradation product 14* was isolated. The cyclosilamine 15 was formed from the reaction of 1 with 2,6-(diphenyl)phenyl azide. The bonding situation and ligation properties of Dipp2NHSi in transition metal complexes was assessed in the second part of the thesis by means of theoretical calculations and experimental investigations. Calculations on the main electronic features of Me2Im/Me2NHSi and Dipp2NHSi/Dipp2Im revealed significant differences in the frontier orbital region of these compounds, which affect the ligation properties of NHSis in general. It was demonstrated that NHSis show significantly different behaviour concerning their coordination chemistry. In particular, one energetically low lying π-acceptor orbital seems to determine the coordination chemistry of these ligands. To provide experimental support for these calculations, the silylene complexes [M(CO)5(Dipp2NHSi)] (M = Cr 16, Mo 17, W 18) were synthesized from Dipp2NHSi and [M(CO)6] (M = Cr, Mo, W) and the tungsten NHSi complex 18 was compared to the NHC complexes [W(CO)5(iPr2Im)] (19), [W(CO)5(iPr2ImMe)] (20) and [W(CO)5(Me2ImMe)] (21). The bonding of Me2Im and Me2NHSi (= L) to transition metal complexes has been assessed with DFT calculations for the model systems [Ni(L)], [Ni(CO)3(L)], and [W(CO)5(L)]. These studies revealed some common features in the difference between M–NHSi and M–NHC bonding which largely affect the bonding situation in transition metal complexes. NHSis show a propensity for bridging two metal atoms which was demonstrated on three different examples. Dipp2NHSi reacts with [Ni(CO)4] to form the dinuclear silylene-bridged complex [{Ni(CO)2(μ-Dipp2NHSi)}2] (22) upon CO elimination. The reduction of [Ni(η5-C5H5)2] with lithium naphthalenide in the presence of Dipp2NHSi yielded the NHSi-bridged Ni(I) dimer [{(η5 C5H5)Ni(µ-Dipp2NHSi)}2] (23). The dimeric half-sandwich complex [{(η5-C5H5)Fe(CO)2}2] led upon reaction with Dipp2NHSi to the formation of the dinuclear, NHSi-bridged complex [{(η5-C5H5)Fe(CO)}2(µ-CO)(µ-Dipp2NHSi)] (24). The insertion of Dipp2NHSi into metal halide bonds was investigated in a series of manganese complexes [Mn(CO)5(X)] (X = Cl, Br, I). The reaction of Dipp2NHSi with [Mn(CO)5(I)] led to substitution of two carbonyl ligands with Dipp2NHSi (1) to afford the tricarbonyl complex [Mn(CO)3(Dipp2NHSi)2(I)] (25). In 25, the iodide ligand is aligned in the {Mn(CO)3} plane, located between both NHSi silicon atoms. Treatment of [Mn(CO)5(Br)] with two equivalents of Dipp2NHSi afforded the complex [Mn(CO)3(Dipp2NHSi)2(Br)] (26), in which the bromide ligand is distorted towards one of the NHSi ligands. The reaction of the silylene ligand with [Mn(CO)5(Cl)] at room temperature afforded a mixture of two products, [Mn(CO)3(Dipp2NHSi)2(Cl)] (27*) and the insertion product [Mn(CO)4(Dipp2NHSi)(Dipp2NHSi-Cl)] (27). Complete transfer of a halide to the silylene was achieved for the reaction of Dipp2NHSi with [(η5-C5H5)Ni(PPh3)(Cl)] to yield [Ni(PPh3)(η5-C5H5)(Dipp2NHSi-Cl)] (28). Similarly, the reaction with [(η5-C5H5)Fe(CO)2(I)] led to the formation of [(η5 C5H5)Fe(CO)2(Dipp2NHSi-I)] (29). N2 - Diese Arbeit beschäftigt sich mit den Anwendungen des N-heterocyclischen Silylens Dipp2NHSi (1) als ambiphiles Reagenz in der Hauptgruppenchemie und als Ligand in der Übergangsmetallchemie. Ein Schwerpunkt dieser Arbeit ist die Beurteilung der Unterschiede in der Reaktivität von N-heterocyclischen Silylenen in der Hauptgruppen- und Übergangsmetallchemie im Vergleich zu den heutzutage allgegenwärtigen N heterocyclischen Carbenen. Im Verlauf dieser Studie wurde Silylen 1 mit Verbindungen der Gruppe 13 umgesetzt und die Addukte Dipp2NHSi·AlI3 (2), Dipp2NHSi·Al(C6F5)3 (3) und Dipp2NHSi·B(C6F5)3 (4) isoliert. Weiterhin wurde die Reaktivität von Dipp2NHSi (1) in Bezug auf ElementHalogen-Bindungen verschiedener Hauptgruppenelement-Verbindungen untersucht. Die Umsetzung mit elementarem Brom und Iod führt zu den Dihalogensilanen Dipp2NHSiBr2 (5) und Dipp2NHSiI2 (6). Unter Verwendung von Methyliodid, Benzylchlorid und Benzylbromid konnten die Insertionsprodukte Dipp2NHSi(I)(Me) (10), Dipp2NHSi(Cl)(benzyl) (11) und Dipp2NHSi(Br)(benzyl) (12) gebildet werden. Die Insertion ist gegenüber der reduktiven Kupplung unter Ausbildung von RH2C–CH2R (R = H, Ph) und dem Dihalosilan bevorzugt. Die Umsetzung von 1 mit dem Zinnchlorid Me3SnCl führt Bildung des Diazabutens {(Me3Sn)N(Dipp)CH}2 (9). Die Reaktion mit Ph2SnCl2 hingegen ergibt das Dichlorsilan Dipp2NHSiCl2 (8) sowie cyclische Polystannane der Form (Ph2Sn)n. Außerdem wurde Dipp2NHSi mit Aziden unterschiedlichen sterischen Anspruchs umgesetzt. Die Reaktion mit Adamantylazid führt zur Bildung des Tetrazolins 13. Das sterisch weniger anspruchsvolle Trimethylsilylazid reagiert mit Dipp2NHSi unter Bildung des Silylazids Dipp2NHSi(N(SiMe3)2)(N3) (14). Das Cyclosilamin 15 wird durch die Reaktion von 1 mit 2,6-(Diphenyl)phenylazid gebildet. Im zweiten Teil der Arbeit wurden die Bindungssituation und die Ligandeneigenschaften von Dipp2NHSi (1) in Übergangsmetallkomplexen mithilfe von theoretischen Rechnungen und experimentellen Untersuchungen beleuchtet. DFT-Rechnungen zu den grundlegenden elektronischen Eigenschaften von Me2Im/Me2NHSi und Dipp2Im/Dipp2NHSi ergaben signifikante Unterschiede im Bereich der Grenzorbitale, welche die Bindungssituation von NHSis im Allgemeinen beeinflussen. Insbesondere ein energetisch tiefliegendes π-Orbital scheint die Koordinationschemie dieser Liganden zu bestimmen. Zur Unterstützung der theoretischen Befunde wurden die Silylen-Komplexe M(CO)5(Dipp2NHSi)] (M = Cr 16, Mo 17, W 18) durch Umsetzung von Dipp2NHSi und [M(CO)6] (M= Cr, Mo, W) dargestellt und der Wolframkomplex 18 mit den NHC-Komplexen [W(CO)5(iPr2Im)] (19), [W(CO)5(iPr2ImMe)] (20) und [W(CO)5(Me2ImMe)] (21) verglichen. Die Bindung von Me2Im und Me2NHSi (= L) und Übergangsmetallkomplexen wurde für die verschiedenen Modellverbindungen [Ni(L)], [Ni(CO)3(L)] und [W(CO)5(L)] mittels DFT Rechnungen untersucht, wobei einige Unterschiede zwischen den M–NHSi und M–NHC Bindungen festgestellt wurden, welche die Bindungssituation in Übergangsmetallkomplexen stark beeinflussen. Im Unterschied zu NHCs zeigen N-heterocyclische Silylene eine Neigung zur Verbrückung zweier Metallzentren und dieses Verhalten konnte anhand dreier Beispielen belegt werden. Dipp2NHSi (1) reagiert mit [Ni(CO)4] zum Silylen-verbrückten Nickelkomplex [{Ni(CO)2(μ-Dipp2NHSi)}2] (22). Die Reduktion von Nickelocen mit Lithiumnaphthalid in der Gegenwart von Dipp2NHSi (1) führt zur Bildung des NHSi verbrückten, Ni(I)-Dimers [(η5-C5H5)Ni(µ-Dipp2NHSi)]2 (23). Ähnlich hierzu reagiert der dimere Komplex {[(η5-C5H5)Fe(CO)2]2} mit Dipp2NHSi zum Silylen-verbrückten dinuklearen Komplex [{(η5 C5H5)Fe(CO)}2(µ-CO)(µ-Dipp2NHSi)] (24). Weiterhin wurde die Insertion von Dipp2NHSi (1) in MetallHalogen-Bindungen anhand einer Reihe von Mangankomplexen der Form [Mn(CO)5(X)] (X = Cl, Br, I) untersucht. Die Reaktion von zwei Äquivalenten des Silylens 1 mit dem Iodokomplex [Mn(CO)5(I)] führt zur Bildung des Tricarbonylkomplexes [Mn(CO)3(Dipp2NHSi)2(I)] (25), in dem der Iodidligand symmetrisch zwischen den beiden Siliciumatomen der Silylenliganden in der {Mn(CO)3}-Ebene liegt. Ähnlich hierzu wird der Bis-Silylenkomplex [Mn(CO)3(Dipp2NHSi)2(Br)] (26) durch Umsetzung von [Mn(CO)5(Br)] mit 1 erhalten, wobei eine Wechselwirkung des Bromidliganden mit einem Silylenliganden beobachtet wird. Die Reaktion von Dipp2NHSi 1 mit [Mn(CO)5(Cl)] bei Raumtemperatur resultiert in der Bildung zweier Reaktionsprodukte, dem Bis-Silylenkomplex [Mn(CO)3(Dipp2NHSi)2(Cl)] (27*) und dem Insertionsprodukt [Mn(CO)4(Dipp2NHSi)(Dipp2NHSi-Cl)] (27). Die vollständige Übertragung des Halogenidoliganden auf das Siliciumatom von 1 kann auch für den Halb-Sandwich-Komplex [(η5-C5H5)Ni(PPh3)(Cl)] beobachtet werden, wobei der Komplex [Ni(PPh3)(η5-C5H5)(Dipp2NHSi-Cl)] (28) isoliert wird. Ähnlich hierzu führt die Reaktion von [(η5-C5H5)Fe(CO)2(I)] mit dem Silylen 1 ebenfalls zur Bildung des Insertionsproduktes [(η5 C5H5)Fe(CO)2(Dipp2NHSi-I)] (29). KW - Silandiylverbindungen KW - Übergangsmetallkomplexe KW - Hauptgruppenelementverbindungen KW - N-heterocyclic silylenes KW - Diaminosilylenes KW - Transition metal silylene complexes Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-217246 ER - TY - THES A1 - Roos, Markus T1 - Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems T1 - Synthese, Photophysik und Photokatalyse von [FeFe]-Komplex enthaltenden Dyaden und bimolekularen Systemen N2 - In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis. N2 - Im Rahmen dieser Arbeit konnten insgesamt drei photokatalytisch aktive Dyaden zur Protonenreduktion zusammen mit den zugehörigen Einzelkomponenten synthetisiert werden. Zwei von ihnen, D1 und D2, umfassten einen [Ru(bpy)3]2+-Photosensibilisator und D3 einen [Ir(ppy)2bpy]+-Photosensibilisator. Als Katalysator wurde in allen Systemen ein Ppyr3-substituierter Propyldithiolat-[FeFe]-Komplex verwendet. Die absorptionsspektroskopischen und elektrochemischen Untersuchungen zeigten, dass eine innerdyadische elektronische Kopplung aufgrund von Konjugationsblockern innerhalb der verwendeten Brückeneinheiten wirksam verhindert wird. Die photokatalytischen Untersuchungen zeigten, dass alle dyadenhaltigen Zweikomponentensysteme (2CS) eine signifikant schlechtere Leistung zeigten als die entsprechenden bimolekularen Dreikomponentensysteme (3CS). Mithilfe der transienten Absorptionsspektroskopie konnte gezeigt werden, dass sich die 2CS während der Photokatalyse sehr ähnlich wie die zugehörigen Mehrkomponentensysteme verhalten. Das Elektron, das für den intramolekularen Transfer von der Photosensibilisatoreinheit zur Katalysatoreinheit innerhalb der Dyaden vorgesehen war, verbleibt analog zu den 3CS und trotz des kovalent gebundenen Katalysators relativ lange am Photosensibilisator. Es wird daher angenommen, dass dieser intramolekulare Elektronentransfer wahrscheinlich aufgrund der schwachen elektronischen Kopplung, die durch die verwendeten Brückeneinheiten verursacht wird, behindert wird. Stattdessen umgeht das System dies durch einen intermolekularen Transfer zu anderen Dyadenmolekülen in unmittelbarer Nähe. Darüber hinaus konnte mithilfe von Emissionslöschungsexperimenten und elektrochemischen Untersuchungen eindeutig darauf geschlossen werden, dass alle untersuchten Systeme während der Photokatalyse über den reduktiven Löschmechanismus ablaufen. KW - Fotokatalyse KW - Elektronentransfer KW - proton reduction KW - [FeFe] hydrogenase mimic KW - dyad KW - ruthenium photosensitizer KW - iridium photosensitizer KW - Protonenreduktion KW - [FeFe]-Hydrogenase Imitator KW - Dyade KW - Ruthenium-Photosensibilisator KW - Iridium-Photosensibilisator Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-234537 ER - TY - THES A1 - Wirthensohn, Raphael Sebastian T1 - Metallvermittelte Perfluoralkylierungen und die elektrochemische Fluorierung zu Perfluoralkylverbindungen T1 - Metal-mediated perfluoroalkylations and the electrochemical fluorination to perfluoroalkyl compounds N2 - Diese Arbeit beschäftigt sich mit der Synthese und Charakterisierung von mehrfach perfluoralkylierten Verbindungen. Das erste Kapitel behandelt die Kupfer-vermittelte mehrfache Pentafluorethylierung von aromatischen Systemen, sowie die Untersuchung deren Folgechemie. Dabei wurden iodierte Aryl-Derivate mit dem Kupferorganyl CuC2F5 umgesetzt. Mit dieser Methode konnten symmetrisch und unsymmetrisch pentafluorethylierte Anilin- und Phenol-Derivate dargestellt werden. Die Anilin-Derivate wurden zu den entsprechenden Diazoniumsalzen umgesetzt, welche zunächst vollständig charakterisiert und anschließend deren Folgechemie untersucht wurde. Das zweite Kapitel behandelt die Darstellung von Bis(trifluormethyl)sulfon durch elektrochemische Fluorierung mittels des Simons-Prozesses. Dabei wurde der Umsatz der Reaktion durch Verwendung der teilfluorierten Verbindung (Trifluormethyl)methylsulfon als Startmaterial optimiert. N2 - Within this thesis multiple perfluoroalkylated compounds were synthesized and characterized. The first chapter deals with the copper-mediated multiple pentafluoroethylation of aromatic systems, and the investigation of their further reactivity. In this work, iodinated aryl derivatives were reacted with the copper organyl CuC2F5. Symmetrically and asymmetrically pentafluoroethylated aniline and phenol derivatives were prepared via this method. The aniline derivatives were reacted to give the corresponding diazonium salts, which were first fully characterized and then their further reactivities were investigated. The second chapter deals with the preparation of bis(trifluoromethyl)sulfone by electrochemical fluorination using the Simons process. Here, the conversion of the reaction was optimized by using the partially fluorinated compound (trifluoromethyl)methyl sulfone as starting material. KW - Perfluoralkylierung KW - Diazoniumverbindungen KW - Fluorierung KW - elektrochemische Fluorierung KW - Diazoniumsalze KW - Pentafluorethylierung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-286640 ER - TY - THES A1 - Tendera, Lukas T1 - NHC-ligated Nickel(0)-Complexes: Bond Activation, Redox Behavior and Catalysis T1 - NHC-substituierte Nickel(0)-Komplexe: Bindungsaktivierung, Redoxeigenschaften und Katalyse N2 - This thesis describes the synthesis and reactivity of bis-NHC ligated nickel(0)-complexes and their application in catalytic cyclization and borylation reactions of alkynes. The focus of the presented work lies on the investigation of the electronic and steric impact of different NHC ligands on the reactivity and catalytic activity of [Ni(NHC)2] complexes. Since d10 ML2 complexes play a decisive role for numerous catalytic reactions, such as the Suzuki-Miyaura cross-coupling, the first chapter provides an overview about the general properties of NHCs and the chemistry of NHC-ligated nickel complexes, their synthesis, characterization, reactivity, and application in catalysis. N2 - Die vorliegende Arbeit befasst sich mit der Synthese und Reaktivität von zweifach NHC-stabilisierten Nickel(0)-Komplexen sowie deren Anwendung als Katalysatoren in Zyklisierungs- und Borylierungsreaktionen von Alkinen. Der Fokus liegt auf der Untersuchung von elektronischen und sterischen Einflüssen verschiedener NHC-Liganden auf die Reaktivität und katalytische Aktivität von [Ni(NHC)2]-Komplexen. Da solche d10-ML2 Komplexe heute für eine Vielzahl von katalytischen Reaktionen von immenser Bedeutung sind, wie z. B. der Suzuki-Miyaura-Kreuzkupplung, wird im ersten Kapitel ein Überblick über die grundlegenden Eigenschaften von NHCs und die Chemie NHC-substituierter Nickel-Komplexe, deren Synthese, Charakterisierung, Reaktivität und Anwendung in der Katalyse, gegeben. KW - Übergangsmetallkomplexe KW - N-heterozyklische Carbene KW - Nickel-Complexes KW - Borylation KW - Cyclotrimerization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-290654 ER - TY - THES A1 - Rang, Maximilian T1 - Metallähnliche Reaktivität \(in\) \(situ\) erzeugter Borylene T1 - Metallomimetic reactivity of transiently generated borylenes N2 - Einfach Lewis-Basen stabilisierte Borylene wurden durch Reduktion in situ hergestellt und in Gegenwart von Kohlenstoffmonoxid oder Distickstoff umgesetzt. Die entstandenen Verbindungen wurden mittels NMR-, ESR-, UV/Vis- und IR-Spektroskopie sowie Einkristallröntgenstrukturanalyse charakterisiert. Im Zuge dessen konnten für die erhaltenen Spezies Eigenschaften ermittelt werden, die denen analoger Übergangsmetallkomplexe ähneln. Ferner konnten die zugrundeliegenden mechanistischen Vorgänge der Reaktionen durch gezielte Variation der Reaktionsparameter aufgeklärt werden. Zudem wurden Redoxverhalten und Reaktivitäten der isolierten Produkte in weiterführenden Studien näher untersucht. N2 - Mono(Lewis base)-stabilized borylenes were transiently generated by reduction and converted in the presence of carbon monoxide or dinitrogen. The resulting compounds were characterized by means of NMR, EPR, UV-vis and IR spectroscopy as well as X-ray diffraction analysis. The properties determined for the isolated species in the course of these investigations closely resemble those of analogous transition metal complexes. Furthermore, it was possible to elucidate the mechanistic processes underlying the reactions through systematic alteration of the reaction parameters. Additionally, the redox behaviour and reactivities of the isolated products were examined more closely. KW - Bor KW - Distickstoff KW - Kohlenstoffmonoxid KW - Borylene KW - niedervalente Borverbindungen KW - Distickstoff Aktivierung KW - Distickstoff Spaltung KW - Borylencarbonyle KW - Kohlenmonoxid KW - cAAC Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240465 ER - TY - THES A1 - Föhrenbacher, Steffen Albert T1 - Tris(pentafluorethyl)difluorphosphoran als \(Lewis\)-saure Komponente von Frustrierten \(Lewis\)-Paaren und als Fluorid-Akzeptor in der Übergangsmetallchemie T1 - Tris(pentafluoroethyl)difluorophosphorane as \(Lewis\) acidic component of Frustrated \(Lewis\) Pairs and as fluoride acceptor in transition metal chemistry N2 - Im Rahmen dieser Arbeit wurde die Reaktivität des Phosphorans (C2F5)3PF2 gegenüber Lewis-Basen (N-heterozyklische Carbene und Phosphane) und gegenüber verschiedenen Übergangsmetall-Fluoridokomplexen untersucht. Im ersten Teil werden die Lewis-Säure/Base-Addukte zwischen (C2F5)3PF2 und verschiedenen N-heterozyklischen Carbenen (NHCs) beschrieben. Der Fokus des zweiten Teils der Arbeit liegt auf der Darstellung kationischer Komplexe ausgehend von neutralen d-Block-Metallfluoriden, welche durch Fluorid-Transfer auf das Lewis-acide (C2F5)3PF2 erfolgt. Hierbei wurden Komplexe verschiedener Übergangsmetalle (Ti, Ni, Cu) verwendet, wodurch der Fluorid-Transfer auf das Phosphoran quer über die 3d-Reihe untersucht wurde. Im letzten Kapitel dieser Arbeit wurden die Synthese und die Anwendung von Kationen des Typs [(NHC)Cu]+ eingehender untersucht. Dazu wurde zunächst die Synthese der Ausgangsverbindungen [(NHC)Cu(F)] modifiziert. Anschließend wurden diese Fluorido-Komplexe auf deren Reaktivität gegenüber (C2F5)3PF2 untersucht. Nachfolgend wurden die Reaktivität von [(Dipp2Im)Cu(C6Me6)]FAP in Ligandenaustauschreaktionen bzw. die Synthese von Komplexen [(Dipp2Im)Cu(LB)]FAP (LB = Lewis-Base) eingehender untersucht. N2 - In the course of this work, the reactivity of the phosphorane (C2F5)3PF2 towards Lewis bases (N-heterocyclic carbenes and phosphines) and various transition-metal fluorido complexes was investigated. In the first part, Lewis acid/base adducts of (C2F5)3PF2 and several N-heterocyclic carbenes (NHCs) are described. The focus of the second part of the work is on the synthesis of cationic complexes starting from neutral d-block metal fluorides, which takes place via fluoride transfer to the Lewis acidic (C2F5)3PF2. Complexes of several transition metals (Ti, Ni, Cu) were applied, whereby the fluoride transfer to the phosphorane was investigated across the 3d row. In the last part of this work the synthesis and application of cations of the type [(NHC)Cu]+ were examined in more detail. First, the synthesis of the starting materials [(NHC)Cu(F)] was modified. Subsequently the reactivity of these fluorido complexes towards (C2F5)3PF2 was investigated. The reactivity of [(Dipp2Im)Cu(C6Me6)]FAP in ligand exchange reactions and the synthesis of complexes [(Dipp2Im)Cu(LB)]FAP (LB = Lewis base) was subsequently studied in more detail. KW - Phosphorane KW - Übergangsmetallkomplexe KW - Addukt KW - Kupfer KW - N-heterozyklische Carbene KW - Frustrierte Lewis-Paare KW - Schwach koordinierende Anionen KW - Fluor(perfluoralkyl)phosphorane KW - N-Heterocyclic Carbenes KW - Frustrated Lewis Pairs KW - Fluoro(perfluoroalkyl)phosphoranes KW - Weakly Coordinating Anions Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-251602 ER -