TY - RPRT A1 - Alfredsson, Rebecka A1 - Kassler, Andreas A1 - Vestin, Jonathan A1 - Pieska, Marcus A1 - Amend, Markus T1 - Accelerating a Transport Layer based 5G Multi-Access Proxy on SmartNIC T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Utilizing multiple access technologies such as 5G, 4G, and Wi-Fi within a coherent framework is currently standardized by 3GPP within 5G ATSSS. Indeed, distributing packets over multiple networks can lead to increased robustness, resiliency and capacity. A key part of such a framework is the multi-access proxy, which transparently distributes packets over multiple paths. As the proxy needs to serve thousands of customers, scalability and performance are crucial for operator deployments. In this paper, we leverage recent advancements in data plane programming, implement a multi-access proxy based on the MP-DCCP tunneling approach in P4 and hardware accelerate it by deploying the pipeline on a smartNIC. This is challenging due to the complex scheduling and congestion control operations involved. We present our pipeline and data structures design for congestion control and packet scheduling state management. Initial measurements in our testbed show that packet latency is in the range of 25 μs demonstrating the feasibility of our approach. KW - Datennetz KW - multipath KW - MP-DCCP KW - 5G-ATSSS KW - networking KW - dataplane programming KW - P4 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280798 ER - TY - RPRT A1 - Brisch, Fabian A1 - Kassler, Andreas A1 - Vestin, Jonathan A1 - Pieska, Marcus A1 - Amend, Markus T1 - Accelerating Transport Layer Multipath Packet Scheduling for 5G-ATSSS T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Utilizing multiple access networks such as 5G, 4G, and Wi-Fi simultaneously can lead to increased robustness, resiliency, and capacity for mobile users. However, transparently implementing packet distribution over multiple paths within the core of the network faces multiple challenges including scalability to a large number of customers, low latency, and high-capacity packet processing requirements. In this paper, we offload congestion-aware multipath packet scheduling to a smartNIC. However, such hardware acceleration faces multiple challenges due to programming language and platform limitations. We implement different multipath schedulers in P4 with different complexity in order to cope with dynamically changing path capacities. Using testbed measurements, we show that our CMon scheduler, which monitors path congestion in the data plane and dynamically adjusts scheduling weights for the different paths based on path state information, can process more than 3.5 Mpps packets 25 μs latency. KW - multipath packet scheduling KW - P4 KW - MP-DCCP KW - 5G KW - ATSSSS Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322052 ER - TY - THES A1 - Baunach, Marcel T1 - Advances in Distributed Real-Time Sensor/Actuator Systems Operation - Operating Systems, Communication, and Application Design Concepts - T1 - Fortschritte im Betrieb drahtloser Sensor/Aktuator Netzwerke N2 - This work takes a close look at several quite different research areas related to the design of networked embedded sensor/actuator systems. The variety of the topics illustrates the potential complexity of current sensor network applications; especially when enriched with actuators for proactivity and environmental interaction. Besides their conception, development, installation and long-term operation, we'll mainly focus on more "low-level" aspects: Compositional hardware and software design, task cooperation and collaboration, memory management, and real-time operation will be addressed from a local node perspective. In contrast, inter-node synchronization, communication, as well as sensor data acquisition, aggregation, and fusion will be discussed from a rather global network view. The diversity in the concepts was intentionally accepted to finally facilitate the reliable implementation of truly complex systems. In particular, these should go beyond the usual "sense and transmit of sensor data", but show how powerful today's networked sensor/actuator systems can be despite of their low computational performance and constrained hardware: If their resources are only coordinated efficiently! N2 - Diese Arbeit behandelt einige sehr unterschiedliche Forschungsbereiche bezüglich des Designs vernetzter und eingebetteter Sensor/Aktuator-Systeme. Die Vielfalt der Themen zeigt die potenzielle Komplexität aktueller Sensornetzwerk-Anwendungen, insbesondere wenn sie mit Aktuatoren zur Interaktion mit der Umwelt ausgestattet sind. Neben deren Konzeption, Entwicklung, Installation und dem langfristigen Betrieb wird besonders auf diverse "low-level" Aspekte eingegangen: Kompositionelles Hardware- und Software-Design, Task Kooperation und Kollaboration, Speicher-Verwaltung und Echtzeit-Betrieb werden aus lokaler Sicht der Sensorknoten betrachtet. Im Kontrast werden Knoten-Synchronisation, Kommunikation, sowie Sensordatenerfassung, -aggregation und -fusion aus globaler Netzwerk-Sicht diskutiert. Die Vielfalt der behandelten Konzepte wurde bewusst in Kauf genommen, um letztlich die zuverlässige Umsetzung sehr komplexer Systeme zu erleichtern. Insbesondere sollte dies über das übliche "Erfassen und Übertragen von Sensordaten" hinausgehen, und zeigen, wie mächtig heutige vernetzte Sensor/Aktuator-Systeme trotz ihrer geringen Rechenleistung und eingeschränkten Hardware sein können: Wenn ihre Ressourcen effizient koordiniert werden! KW - Eingebettetes System KW - Drahtloses Sensorsystem KW - Echtzeitsystem KW - Dynamische Speicherverwaltung KW - Ressourcenallokation KW - Fernwartung KW - Betriebssystem KW - Verteiltes System KW - Lokalisation KW - Embedded Systems KW - Real-Time Operating Systems KW - Localization KW - Wireless Sensor/Actuator Systems KW - Dynamic Memory Management Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76489 ER - TY - THES A1 - Eichelberger, Holger T1 - Aesthetics and automatic layout of UML class diagrams T1 - Ästhetik und automatisches Layout von UML Klassendiagrammen N2 - In the last years, visual methods have been introduced in industrial software production and teaching of software engineering. In particular, the international standardization of a graphical software engineering language, the Unified Modeling Language (UML) was a reason for this tendency. Unfortunately, various problems exist in concrete realizations of tools, e.g. due to a missing compliance to the standard. One problem is the automatic layout, which is required for a consistent automatic software design. The thesis derives reasons and criteria for an automatic layout method, which produces drawings of UML class diagrams according to the UML specification and issues of human computer interaction, e.g. readability. A unique set of aesthetic criteria is combined from four different disciplines involved in this topic. Based on these aethetic rules, a hierarchical layout algorithm is developed, analyzed, measured by specialized measuring techniques and compared to related work. Then, the realization of the algorithm as a Java framework is given as an architectural description. Finally, adaptions to anticipated future changes of the UML, improvements of the framework and example drawings of the implementation are given. N2 - Visuelle Techniken im Software-Entwurf haben in den letzten Jahre Einzug in Industrie und Lehre gehalten. Begünstigt wurde dies durch die Unified Modeling Language (UML), eine international standardisierte, graphische Entwurfssprache. Dennoch klaffen weite Lücken bei der Umsetzung in konkrete Tools, teils an der Realisierung des Standards, insbesondere aber auch beim automatischen Layout, das für konsistenten (teil-)automatisierten Softwareentwurf unerlässlich ist. Die Arbeit stellt zunächst Gründe und Kriterien für ein standardkonformes, menschenlesbares automatisches Layout von UML Klassendiagrammen zusammen. Ästhetische Kriterien werden aus vier unterschiedlichen Fachdisziplinen destilliert und kombiniert. Basierend auf diesen Kriterien wird danach ein hierarchischer Layoutalgorithmus entwickelt, analysiert, mit speziellen Messverfahren vermessen und mit Konkurrenzalgorithmen verglichen. Im Anschluss daran wird die Realisierung des Algorithmus als Java-Framework im Rahmen einer Architekturbeschreibung diskutiert. Anpassungen an zukünftige Entwicklungen der UML, Weiterentwicklungen des Frameworks und Beispieldiagramme, die von der Implementierung generiert wurden, runden die Arbeit ab. KW - URL KW - Klassendiagramm KW - automatisches Layout KW - UML Klassendiagramm KW - semantische Ästhetik KW - Zeichnen von Graphen KW - computergestützte Softwaretechnik KW - automatic Layout KW - UML class diagram KW - semantical aesthetic KW - graph drawing KW - CASE Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14831 ER - TY - JOUR A1 - Bartl, Andrea A1 - Wenninger, Stephan A1 - Wolf, Erik A1 - Botsch, Mario A1 - Latoschik, Marc Erich T1 - Affordable but not cheap: a case study of the effects of two 3D-reconstruction methods of virtual humans JF - Frontiers in Virtual Reality N2 - Realistic and lifelike 3D-reconstruction of virtual humans has various exciting and important use cases. Our and others’ appearances have notable effects on ourselves and our interaction partners in virtual environments, e.g., on acceptance, preference, trust, believability, behavior (the Proteus effect), and more. Today, multiple approaches for the 3D-reconstruction of virtual humans exist. They significantly vary in terms of the degree of achievable realism, the technical complexities, and finally, the overall reconstruction costs involved. This article compares two 3D-reconstruction approaches with very different hardware requirements. The high-cost solution uses a typical complex and elaborated camera rig consisting of 94 digital single-lens reflex (DSLR) cameras. The recently developed low-cost solution uses a smartphone camera to create videos that capture multiple views of a person. Both methods use photogrammetric reconstruction and template fitting with the same template model and differ in their adaptation to the method-specific input material. Each method generates high-quality virtual humans ready to be processed, animated, and rendered by standard XR simulation and game engines such as Unreal or Unity. We compare the results of the two 3D-reconstruction methods in an immersive virtual environment against each other in a user study. Our results indicate that the virtual humans from the low-cost approach are perceived similarly to those from the high-cost approach regarding the perceived similarity to the original, human-likeness, beauty, and uncanniness, despite significant differences in the objectively measured quality. The perceived feeling of change of the own body was higher for the low-cost virtual humans. Quality differences were perceived more strongly for one’s own body than for other virtual humans. KW - virtual humans KW - 3D-reconstruction methods KW - avatars KW - agents KW - user study Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260492 VL - 2 ER - TY - RPRT A1 - Grigorjew, Alexej A1 - Diederich, Philip A1 - Hoßfeld, Tobias A1 - Kellerer, Wolfgang T1 - Affordable Measurement Setups for Networking Device Latency with Sub-Microsecond Accuracy T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This document presents a networking latency measurement setup that focuses on affordability and universal applicability, and can provide sub-microsecond accuracy. It explains the prerequisites, hardware choices, and considerations to respect during measurement. In addition, it discusses the necessity for exhaustive latency measurements when dealing with high availability and low latency requirements. Preliminary results show that the accuracy is within ±0.02 μs when used with the Intel I350-T2 network adapter. KW - Datennetz KW - latency Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280751 ER - TY - THES A1 - Böhler, Elmar T1 - Algebraic closures in complexity theory T1 - Algebraische Hüllen in der Komplexitätstheorie N2 - We use algebraic closures and structures which are derived from these in complexity theory. We classify problems with Boolean circuits and Boolean constraints according to their complexity. We transfer algebraic structures to structural complexity. We use the generation problem to classify important complexity classes. N2 - Algebraische Hüllen und Strukturen, die mit solchen zusammenhängen, werden für die Komplexitätstheorie genutzt. Es werden Probleme im Zusammenhang mit Booleschen Schaltkreisen und Constraint-Satisfaction Problemen komplexitätstheoretisch klassifiziert. Strukturen aus der Algebra werden auf die Strukturelle Komplexität übertragen. Das Generierungsproblem, wird zur Klassifikation wichtiger Komplexitätsklassen benutzt. KW - Komplexitätstheorie KW - Komplexitätstheorie KW - Clones KW - Generierungsproblem KW - Postsche Klassen KW - Complexity Theory KW - Clones KW - Generation Problem KW - Post's Classes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-16106 ER - TY - JOUR A1 - Kammerer, Klaus A1 - Göster, Manuel A1 - Reichert, Manfred A1 - Pryss, Rüdiger T1 - Ambalytics: a scalable and distributed system architecture concept for bibliometric network analyses JF - Future Internet N2 - A deep understanding about a field of research is valuable for academic researchers. In addition to technical knowledge, this includes knowledge about subareas, open research questions, and social communities (networks) of individuals and organizations within a given field. With bibliometric analyses, researchers can acquire quantitatively valuable knowledge about a research area by using bibliographic information on academic publications provided by bibliographic data providers. Bibliometric analyses include the calculation of bibliometric networks to describe affiliations or similarities of bibliometric entities (e.g., authors) and group them into clusters representing subareas or communities. Calculating and visualizing bibliometric networks is a nontrivial and time-consuming data science task that requires highly skilled individuals. In addition to domain knowledge, researchers must often provide statistical knowledge and programming skills or use software tools having limited functionality and usability. In this paper, we present the ambalytics bibliometric platform, which reduces the complexity of bibliometric network analysis and the visualization of results. It accompanies users through the process of bibliometric analysis and eliminates the need for individuals to have programming skills and statistical knowledge, while preserving advanced functionality, such as algorithm parameterization, for experts. As a proof-of-concept, and as an example of bibliometric analyses outcomes, the calculation of research fronts networks based on a hybrid similarity approach is shown. Being designed to scale, ambalytics makes use of distributed systems concepts and technologies. It is based on the microservice architecture concept and uses the Kubernetes framework for orchestration. This paper presents the initial building block of a comprehensive bibliometric analysis platform called ambalytics, which aims at a high usability for users as well as scalability. KW - system architecture design KW - bibliometric analysis KW - community detection Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-244916 SN - 1999-5903 VL - 13 IS - 8 ER - TY - JOUR A1 - Tsoulias, Nikos A1 - Jörissen, Sven A1 - Nüchter, Andreas T1 - An approach for monitoring temperature on fruit surface by means of thermal point cloud JF - MethodsX N2 - Heat and excessive solar radiation can produce abiotic stresses during apple maturation, resulting fruit quality. Therefore, the monitoring of temperature on fruit surface (FST) over the growing period can allow to identify thresholds, above of which several physiological disorders such as sunburn may occur in apple. The current approaches neglect spatial variation of FST and have reduced repeatability, resulting in unreliable predictions. In this study, LiDAR laser scanning and thermal imaging were employed to detect the temperature on fruit surface by means of 3D point cloud. A process for calibrating the two sensors based on an active board target and producing a 3D thermal point cloud was suggested. After calibration, the sensor system was utilised to scan the fruit trees, while temperature values assigned in the corresponding 3D point cloud were based on the extrinsic calibration. Whereas a fruit detection algorithm was performed to segment the FST from each apple. • The approach allows the calibration of LiDAR laser scanner with thermal camera in order to produce a 3D thermal point cloud. • The method can be applied in apple trees for segmenting FST in 3D. Whereas the approach can be utilised to predict several physiological disorders including sunburn on fruit surface. KW - point cloud KW - thermal point cloud KW - fruit temperature KW - sunburn KW - food quality KW - precision horticulture Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300270 SN - 2215-0161 VL - 9 ER - TY - THES A1 - Jarschel, Michael T1 - An Assessment of Applications and Performance Analysis of Software Defined Networking T1 - Eine Untersuchung von Anwendungen und Leistungsbewertung von Software Defined Networking N2 - With the introduction of OpenFlow by the Stanford University in 2008, a process began in the area of network research, which questions the predominant approach of fully distributed network control. OpenFlow is a communication protocol that allows the externalization of the network control plane from the network devices, such as a router, and to realize it as a logically-centralized entity in software. For this concept, the term "Software Defined Networking" (SDN) was coined during scientific discourse. For the network operators, this concept has several advantages. The two most important can be summarized under the points cost savings and flexibility. Firstly, it is possible through the uniform interface for network hardware ("Southbound API"), as implemented by OpenFlow, to combine devices and software from different manufacturers, which increases the innovation and price pressure on them. Secondly, the realization of the network control plane as a freely programmable software with open interfaces ("Northbound API") provides the opportunity to adapt it to the individual circumstances of the operator's network and to exchange information with the applications it serves. This allows the network to be more flexible and to react more quickly to changing circumstances as well as transport the traffic more effectively and tailored to the user’s "Quality of Experience" (QoE). The approach of a separate network control layer for packet-based networks is not new and has already been proposed several times in the past. Therefore, the SDN approach has raised many questions about its feasibility in terms of efficiency and applicability. These questions are caused to some extent by the fact that there is no generally accepted definition of the SDN concept to date. It is therefore a part of this thesis to derive such a definition. In addition, several of the open issues are investigated. This Investigations follow the three aspects: Performance Evaluation of Software Defined Networking, applications on the SDN control layer, and the usability of SDN Northbound-API for creation application-awareness in network operation. Performance Evaluation of Software Defined Networking: The question of the efficiency of an SDN-based system was from the beginning one of the most important. In this thesis, experimental measurements of the performance of OpenFlow-enabled switch hardware and control software were conducted for the purpose of answering this question. The results of these measurements were used as input parameters for establishing an analytical model of the reactive SDN approach. Through the model it could be determined that the performance of the software control layer, often called "Controller", is crucial for the overall performance of the system, but that the approach is generally viable. Based on this finding a software for analyzing the performance of SDN controllers was developed. This software allows the emulation of the forwarding layer of an SDN network towards the control software and can thus determine its performance in different situations and configurations. The measurements with this software showed that there are quite significant differences in the behavior of different control software implementations. Among other things it has been shown that some show different characteristics for various switches, in particular in terms of message processing speed. Under certain circumstances this can lead to network failures. Applications on the SDN control layer: The core piece of software defined networking are the intelligent network applications that operate on the control layer. However, their development is still in its infancy and little is known about the technical possibilities and their limitations. Therefore, the relationship between an SDN-based and classical implementation of a network function is investigated in this thesis. This function is the monitoring of network links and the traffic they carry. A typical approach for this task has been built based on Wiretapping and specialized measurement hardware and compared with an implementation based on OpenFlow switches and a special SDN control application. The results of the comparison show that the SDN version can compete in terms of measurement accuracy for bandwidth and delay estimation with the traditional measurement set-up. However, a compromise has to be found for measurements below the millisecond range. Another question regarding the SDN control applications is whether and how well they can solve existing problems in networks. Two programs have been developed based on SDN in this thesis to solve two typical network issues. Firstly, the tool "IPOM", which enables considerably more flexibility in the study of effects of network structures for a researcher, who is confined to a fixed physical test network topology. The second software provides an interface between the Cloud Orchestration Software "OpenNebula" and an OpenFlow controller. The purpose of this software was to investigate experimentally whether a pre-notification of the network of an impending relocation of a virtual service in a data center is sufficient to ensure the continuous operation of that service. This was demonstrated on the example of a video service. Usability of the SDN Northbound API for creating application-awareness in network operation: Currently, the fact that the network and the applications that run on it are developed and operated separately leads to problems in network operation. SDN offers with the Northbound-API an open interface that enables the exchange between information of both worlds during operation. One aim of this thesis was to investigate whether this interface can be exploited so that the QoE experienced by the user can be maintained on high level. For this purpose, the QoE influence factors were determined on a challenging application by means of a subjective survey study. The application is cloud gaming, in which the calculation of video game environments takes place in the cloud and is transported via video over the network to the user. It was shown that apart from the most important factor influencing QoS, i.e., packet loss on the downlink, also the type of game type and its speed play a role. This demonstrates that in addition to QoS the application state is important and should be communicated to the network. Since an implementation of such a state conscious SDN for the example of Cloud Gaming was not possible due to its proprietary implementation, in this thesis the application “YouTube video streaming” was chosen as an alternative. For this application, status information is retrievable via the "Yomo" tool and can be used for network control. It was shown that an SDN-based implementation of an application-aware network has distinct advantages over traditional network management methods and the user quality can be obtained in spite of disturbances. N2 - Mit der Vorstellung von OpenFlow durch die Stanford Universität im Jahre 2008 begann ein Prozess im Bereich der Netzwerkforschung, der den vorherrschenden Ansatz der völlig verteilten Netzsteuerung in Frage stellt. Bei OpenFlow handelt es sich um ein Kommunikationsprotokoll, das es ermöglicht die Netzsteuerung aus den Netzwerkgeräten, z. B. einem Router, herauszulösen und als logisch-zentralisierte Einheit als reine Software zu realisieren. Ein Konzept für das im Verlauf des wissenschaftlichen Diskurses der Begriff „Software Defined Networking“ (SDN) geprägt wurde. Für die Betreiber von Netzwerken hat dieses Konzept verschiedene Vorteile. Die beiden wichtigsten lassen sich unter den Punkten Kostenersparnis und Flexibilität zusammenfassen. Zum einen ist es durch die einheitliche Schnittstelle zur Netzwerkhardware („Southbound-API“), wie sie von OpenFlow realisiert wird, möglich Geräte und Software verschiedener Hersteller miteinander zu kombinieren, was den Innovations- und Preisdruck auf diese erhöht. Zum anderen besteht durch die Realisierung der Netzwerksteuerung als frei programmierbare Software mit offenen Schnittstellen („Northbound-API“) die Möglichkeit diese an die individuellen Gegebenheiten des Betreibernetzes anzupassen als auch Informationen mit den Applikationen auszutauschen, die es bedient. Dadurch kann das Netz viel flexibler und schneller auf sich ändernde Gegebenheiten reagieren und den Verkehr effektiver und auf die vom Nutzer erfahrene „Quality of Experience“ (QoE) abgestimmt transportieren. Der Ansatz einer von der Hardware getrennten Netzwerkkontrollschicht für paket-basierte Netze ist nicht neu und wurde in der Vergangenheit bereits mehrfach vorgeschlagen. Daher sah und sieht sich der Ansatz von SDN vielen Fragen nach seiner Realisierbarkeit im Bezug auf Leistungsfähigkeit und Anwendbarkeit gegenüber. Diese Fragen rühren zum Teil auch daher, dass es bis dato keine allgemein anerkannte Definition des SDN Begriffes gibt. Daher ist es ein Teil dieser Doktorarbeit eine solche Definition herzuleiten. Darüber hinaus werden verschiedene der offenen Fragen auf ihre Lösung hin untersucht. Diese Untersuchungen folgen drei Teilaspekten: Leistungsbewertung von Software Defined Networking, Anwendungen auf der SDN Kontrollschicht und die Nutzbarkeit der SDN Northbound-API zum Herstellen eines Applikationsbewusstseins im Netzbetrieb. Leistungsbewertung von Software Defined Networking: Die Frage nach der Leistungsfähigkeit eines SDN-basierten Systems war von Beginn an eine der wichtigsten. In dieser Doktorarbeit wurden zu diesem Zweck experimentelle Messungen zur Leistung OpenFlow-fähiger Switch Hardware und Kontrollsoftware durchgeführt. Die Ergebnisse dieser Messungen dienten als Eingabeparameter zur Aufstellung eines analytischen Modells des reaktiven SDN Ansatzes. Durch das Modell ließ sich bestimmen, dass die Leistungsfähigkeit der Software Kontrollschicht, oft „Controller“ genannt, von entscheidender Bedeutung für die Gesamtleistung des Systems ist, aber der Ansatz insgesamt tragfähig ist. Basierend auf dieser Erkenntnis wurde eine Software zur Analyse der Leistungsfähigkeit von SDN Controllern entwickelt. Diese Software ermöglicht die Emulation der Weiterleitungsschicht eines SDN Netzes gegenüber der Kontrollsoftware und kann so deren Leistungsdaten in verschiedenen Situationen und Konfigurationen bestimmen. Die Messungen mit dieser Software zeigten, dass es durchaus gravierende Unterschiede im Verhalten verschiedener Kontrollsoftware Implementierungen gibt. Unter anderem konnte gezeigt werden, dass einige gegenüber verschiedenen Switches ein unterschiedliches Verhalten aufweisen, insbesondere in der Abarbeitungsgeschwindigkeit von Nachrichten. Ein Umstand der in bestimmten Fällen zu Netzausfällen führen kann. Anwendungen auf der SDN Kontrollschicht: Das Kernstück von Software Defined Networking sind die intelligenten Netzwerkapplikationen, die auf der Kontrollschicht betrieben werden. Allerdings steht deren Entwicklung noch am Anfang und es ist wenig über die technischen Möglichkeiten und deren Grenzen bekannt. Daher wurde in dieser Doktorarbeit der Frage nachgegangen, in welchem Verhältnis sich die Realisierung einer Netzwerkaufgabe mit SDN zur klassischen Umsetzung dieser bewegt. Bei dieser Aufgabe handelt es sich im speziellen um das Monitoring von Links und dem darauf befindlichen Netzwerkverkehr. Hier wurde ein typischer Ansatz für diese Aufgabe basierend auf Wiretapping und spezieller Messhardware aufgebaut und mit einer Implementierung durch OpenFlow Switches und einer speziellen SDN Kontrollapplikation verglichen. Die Ergebnisse des Vergleiches zeigen, dass die SDN Variante im Bezug auf Bandbreiten und Verzögerungsabschätzung durchaus mit dem traditionellen Messaufbau im Bezug auf Messgenauigkeit mithalten kann. Jedoch müssen Abstriche bezüglich der Verzögerungsmessung unterhalb des Millisekundenbereiches gemacht werden. Eine weitere Frage bezüglich der SDN Kontrollapplikationen besteht darin, ob und wie gut sich bestehende Probleme in Netzwerken jetzt mit SDN lösen lassen. Diesbezüglich wurden in dieser Doktorarbeit zwei Programme auf SDN Basis entwickelt, die zwei typische Netzwerkprobleme lösen. Zum einen das Tool „IPOM“, dass es ermöglicht via SDN auf Basis einer festen physikalischen Testnetz-Topologie eine andere zu emulieren und so einem Forscher auf dem Testnetz deutlich mehr Flexibilität bei der Untersuchung von Auswirkungen anderer Netzstrukturen zu ermöglichen. Die zweite Software stellt eine Schnittstelle zwischen der Cloud Orchestration Software „OpenNebula“ und einem OpenFlow Controller dar. Der Zweck dieser Software war es experimentell zu untersuchen, ob eine Vorwarnung des Netzes vor einem bevorstehenden Umzug eines virtuellen Dienstes in einem Datenzentrum hinreichend ist, um den kontinuierlichen Betrieb dieses Dienstes zu gewährleisten. Dieses konnte am Beispiel eines Videodienstes demonstriert werden. Nutzbarkeit der SDN Northbound-API zum Herstellen eines Applikationsbewusstseins im Netzbetrieb: Aktuell führt die Tatsache, dass Netz und Applikationen, die darauf laufen, separat entwickelt und betrieben werden zu Problemen im Netzbetrieb. SDN bietet mit der Northbound-API eine Schnittstelle an, die den Austausch zwischen Informationen beider Welten im Betrieb ermöglicht. Ein Ziel dieser Doktorarbeit war es zu untersuchen, ob sich diese Schnittstelle ausnutzen lässt, so dass die vom Nutzer erfahrene QoE hoch gehalten werden kann. Zu diesem Zwecke wurden zunächst mittels einer subjektiven Umfragestudie die Einflussfaktoren auf eine anspruchsvolle Applikation bestimmt. Bei der Applikation handelt es sich um Cloud Gaming, bei dem die Berechnung der Videospiele Umgebung in der Cloud stattfindet und per Video über das Netz transportiert wird. Hier konnte gezeigt werden, dass neben dem wichtigsten QoS Einflussfaktor Paketverlust auf dem Downlink auch die Art des Spieltyps und dessen Geschwindigkeit eine Rolle spielen. Dies belegt, dass neben QoS auch der Applikationszustand wichtig ist und dem Netz mitgeteilt werden sollte. Da eine Umsetzung eines solchen zustandsbewussten SDNs für das Beispiel Cloud Gaming auf Grund dessen proprietärer Implementierung nicht möglich war, wurde in dieser Doktorarbeit auf die Applikation YouTube Video Streaming ausgewichen. Für diese sind mit Hilfe des Tools „YoMo“ Statusinformationen abfragbar und können zur Netzsteuerung genutzt werden. Es konnte gezeigt werden, dass eine SDN-basierte Realisierung eines applikationsbewussten Netzes deutliche Vorteile gegenüber klassischen Netzwerk Management Methoden aufweist und die Nutzerqualität trotz Störfaktoren erhalten werden kann. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/14 KW - Leistungsbewertung KW - Netzwerk KW - Software Defined Networking KW - Quality of Experience KW - Cloud Gaming KW - Performance Evaluation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-100795 SN - 1432-8801 ER -