TY - THES A1 - Baier, Herbert T1 - Operators of Higher Order N2 - Motivated by results on interactive proof systems we investigate the computational power of quantifiers applied to well-known complexity classes. In special, we are interested in existential, universal and probabilistic bounded error quantifiers ranging over words and sets of words, i.e. oracles if we think in a Turing machine model. In addition to the standard oracle access mechanism, we also consider quantifiers ranging over oracles to which access is restricted in a certain way. N2 - Angeregt durch die Resultate über interaktive Beweissysteme untersuchen wir Quantoren in Anwendung auf bereits bekannte Komplexitätsklassen hinsichtlich ihrer dadurch gegebenen Berechnungsmächtigkeit. Von besonderem Interesse sind dabei existentielle und universelle Quantoren sowie Quantoren mit begrenzter Fehlerwahrscheinlichkeit, die alle über Wörter oder Wortmengen (Orakel im Kontext der Turingmaschinen) quantifizieren. Außer in Bezug auf den Standardmechanismus eines Orakelzugriffs werden auch Quantifizierungen über Orakel, für deren Zugriff gewisse Beschränkungen bestehen, betrachtet. KW - Komplexitätstheorie KW - Quantor KW - Operator KW - Komplexitätsklasse Y1 - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140799 SN - 3-8265-4008-5 PB - Shaker Verlag ER - TY - THES A1 - Schmitz, Heinz T1 - The Forbidden Pattern Approach to Concatenation Hierarchies T1 - Verbotsmuster und Hierarchien regulärer sternfreier Sprachen N2 - The thesis looks at the question asking for the computability of the dot-depth of star-free regular languages. Here one has to determine for a given star-free regular language the minimal number of alternations between concatenation on one hand, and intersection, union, complement on the other hand. This question was first raised in 1971 (Brzozowski/Cohen) and besides the extended star-heights problem usually refered to as one of the most difficult open questions on regular languages. The dot-depth problem can be captured formally by hierarchies of classes of star-free regular languages B(0), B(1/2), B(1), B(3/2),... and L(0), L(1/2), L(1), L(3/2),.... which are defined via alternating the closure under concatenation and Boolean operations, beginning with single alphabet letters. Now the question of dot-depth is the question whether these hierarchy classes have decidable membership problems. The thesis makes progress on this question using the so-called forbidden pattern approach: Classes of regular languages are characterized in terms of patterns in finite automata (subgraphs in the transition graph) that are not allowed. Such a characterization immediately implies the decidability of the respective class, since the absence of a certain pattern in a given automaton can be effectively verified. Before this work, the decidability of B(0), B(1/2), B(1) and L(0), L(1/2), L(1), L(3/2) were known. Here a detailed study of these classes with help of forbidden patterns is given which leads to new insights into their inner structure. Furthermore, the decidability of B(3/2) is proven. Based on these results a theory of pattern iteration is developed which leads to the introduction of two new hierarchies of star-free regular languages. These hierarchies are decidable on one hand, on the other hand they are in close connection to the classes B(n) and L(n). It remains an open question here whether they may in fact coincide. Some evidence is given in favour of this conjecture which opens a new way to attack the dot-depth problem. Moreover, it is shown that the class L(5/2) is decidable in the restricted case of a two-letter alphabet. N2 - Die Arbeit beschaeftigt sich mit der Frage nach der Berechenbarkeit der Punkttiefe sternfreier regulaerer Sprachen. Dabei handelt es sich um die Aufgabe, zu einer gegebenen sternfreien regulaeren Sprache die minimal moegliche Anzahl von Wechseln zwischen den Operationen Konkatenation einerseits und Durchschnitt, Vereinigung, Komplement andererseits in einem sternfreien regulaeren Ausdruck fuer die gegebene Sprache zu bestimmen. Diese Frage wurde 1971 erstmals aufgeworfen (Brzozowski/Cohen) und gilt neben dem Problem der erweiterten Sternhoehe als eine der schwierigsten offenen Fragen der Theorie der regulaeren Sprachen. Formal fassen laesst sich das Problem der Punkttiefe durch Hierarchien von Klassen sternfreier regulaerer Sprachen B(0), B(1/2), B(1), B(3/2),...sowie L(0), L(1/2), L(1), L(3/2),.... die - ausgehend von einzelnen Buchstaben - mittels Alternierung zwischen Konkatenation und Booleschen Operationen definiert sind. Die Frage nach der Punkttiefe wird hier zur Frage nach der Entscheidbarkeit der Hierarchieklassen. In der Arbeit werden neue Fortschritte mittels sogenannter Verbotsmuster erzielt. Bei diesem Ansatz werden Klassen regulaerer Sprachen dadurch charakterisiert, dass in den zugehoerigen endlichen Automaten bestimmte Muster (Teilgraphen des Ueberfuehrungsgraphen) verboten werden. Gelingt eine solche Charakterisierung, folgt unmittelbar die Entscheidbarkeit der Klasse, da das Nichtvorhandensein eines Musters in einem gegebenen endlichen Automaten effektiv geprueft werden kann. Bisher war die Entscheidbarkeit von B(0), B(1/2), B(1) und L(0), L(1/2), L(1), L(3/2) bekannt. Mit Hilfe von Verbotsmustern erfolgt eine genaue Untersuchung dieser Klassen, die zu neuen Erkenntnissen ueber ihre innere Struktur fuehrt. Darueberhinaus gelingt der Nachweis der Entscheidbarkeit von B(3/2). Basierend auf diesen Ergebnissen wird eine Theorie der Verbotsmusteriteration entwickelt, die zur Einfuehrung von zwei neuen Hierarchien sternfreier regulaerer Sprachen fuehrt. Diese neuen Hierarchien sind zum einen entscheidbar, zum anderen stehen sie in enger Beziehung zu den Klassen B(n) und L(n). Es bleibt an dieser Stelle eine offene Frage, ob sie eventuell sogar mit ihnen uebereinstimmen. Fuer diese Vermutung werden einige Indizien gesammelt und somit ein neuer Weg fuer eine moegliche Loesung des Problems der Punkttiefe aufgezeigt. In diesem Zusammenhang erfolgt auch erstmals der Nachweis der Entscheidbarkeit der Klasse L(5/2) im eingeschraenkten Fall eines zweielementigen Alphabets. KW - Sternfreie Sprache KW - Dot-Depth-Hierarchie KW - Straubing-Th´erien-Hierarchie KW - Verbotenes Muster KW - Theoretische Informatik KW - reguläre Sprachen KW - endliche Automaten KW - Dot-Depth Problem KW - Entscheidbarkeit KW - Verbotsmuster KW - Theoretical Computer Science KW - regular languages KW - finite automata KW - dot-depth problem KW - decidability KW - forbidden patterns Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2832 ER - TY - THES A1 - Klügl, Franziska T1 - Aktivitätsbasierte Verhaltensmodellierung und ihre Unterstützung bei Multiagentensimulationen T1 - "Activity"-based Modelling of Behaviour and its Support for Multi-Agent Simulation N2 - Durch Zusammenführung traditioneller Methoden zur individuenbasierten Simulation und dem Konzept der Multiagentensysteme steht mit der Multiagentensimulation eine Methodik zur Verfügung, die es ermöglicht, sowohl technisch als auch konzeptionell eine neue Ebene an Detaillierung bei Modellbildung und Simulation zu erreichen. Ein Modell beruht dabei auf dem Konzept einer Gesellschaft: Es besteht aus einer Menge interagierender, aber in ihren Entscheidungen autonomen Einheiten, den Agenten. Diese ändern durch ihre Aktionen ihre Umwelt und reagieren ebenso auf die für sie wahrnehmbaren Änderungen in der Umwelt. Durch die Simulation jedes Agenten zusammen mit der Umwelt, in der er "lebt", wird die Dynamik im Gesamtsystem beobachtbar. In der vorliegenden Dissertation wurde ein Repräsentationsschema für Multiagentensimulationen entwickelt werden, das es Fachexperten, wie zum Beispiel Biologen, ermöglicht, selbständig ohne traditionelles Programmieren Multiagentenmodelle zu implementieren und mit diesen Experimente durchzuführen. Dieses deklarative Schema beruht auf zwei Basiskonzepten: Der Körper eines Agenten besteht aus Zustandsvariablen. Das Verhalten des Agenten kann mit Regeln beschrieben werden. Ausgehend davon werden verschiedene Strukturierungsansätze behandelt. Das wichtigste Konzept ist das der "Aktivität", einer Art "Verhaltenszustand": Während der Agent in einer Aktivität A verweilt, führt er die zugehörigen Aktionen aus und dies solange, bis eine Regel feuert, die diese Aktivität beendet und eine neue Aktivität auswählt. Durch Indizierung dieser Regeln bei den zugehörigen Aktivitäten und Einführung von abstrakten Aktivitäten entsteht ein Schema für eine vielfältig strukturierbare Verhaltensbeschreibung. Zu diesem Schema wurde ein Interpreter entwickelt, der ein derartig repräsentiertes Modell ausführt und so Simulationsexperimente mit dem Multiagentenmodell erlaubt. Auf dieser Basis wurde die Modellierungs- und Experimentierumgebung SeSAm ("Shell für Simulierte Agentensysteme") entwickelt. Sie verwendet vorhandene Konzepte aus dem visuellen Programmieren. Mit dieser Umgebung wurden Anwendungsmodelle aus verschiedenen Domänen realisiert: Neben abstrakten Spielbeispielen waren dies vor allem Fragestellungen zu sozialen Insekten, z.B. zum Verhalten von Ameisen, Bienen oder der Interaktion zwischen Bienenvölkern und Milbenpopulationen. N2 - In this thesis a representational scheme for multi-agent simulations was developed. This framework enables domain experts - e.g. biologists - to build models and carry out experiments without having to understand and use traditional programming languages. The resulting declarative framework is based on two concepts: the body of an agent can be modelled by a set of state variables. The behaviour of the agents can be described best by using rules. With this as a starting point various approaches for structuring the description are examined. The most important concept is the concept of "activity" - a kind of "behavioural state": While the agent is in a certain activity A, it carries out the sequence of actions that is associated with A - and continues with it until a rule fires thus terminating the activity A and selecting a new one. By indexing these rules at the activity they are terminating and by introducing abstract activities, a framework for behaviour modelling emerges that can be structured in multifarious ways. An interpreter executing this representation scheme was developed in order to allow simulation experiments with such a multi-agent model. This simulator was integrated into a modelling and simulation environment, named SeSAm ("Shell for Simulated Agent-Systems"). Using this framework several models in different application domains are implemented: They are ranging from simple games to complex models, especially of social insects - e.g. the behaviour of ants or bees or the interactions between bee hives and mite populations. KW - Agent KW - Simulation KW - Computersimulation KW - Mehragentensystem KW - Simulation KW - Modellierung KW - Multiagentensystem KW - Regelbasiertes System KW - Simulation KW - Modelling KW - Multi-agent system KW - Rule-based Systems Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2874 ER - TY - THES A1 - Reith, Steffen T1 - Generalized Satisfiability Problems T1 - Verallgemeinerte Erfüllbarkeitsprobleme N2 - In the last 40 years, complexity theory has grown to a rich and powerful field in theoretical computer science. The main task of complexity theory is the classification of problems with respect to their consumption of resources (e.g., running time or required memory). To study the computational complexity (i.e., consumption of resources) of problems, similar problems are grouped into so called complexity classes. During the systematic study of numerous problems of practical relevance, no efficient algorithm for a great number of studied problems was found. Moreover, it was unclear whether such algorithms exist. A major breakthrough in this situation was the introduction of the complexity classes P and NP and the identification of hardest problems in NP. These hardest problems of NP are nowadays known as NP-complete problems. One prominent example of an NP-complete problem is the satisfiability problem of propositional formulas (SAT). Here we get a propositional formula as an input and it must be decided whether an assignment for the propositional variables exists, such that this assignment satisfies the given formula. The intensive study of NP led to numerous related classes, e.g., the classes of the polynomial-time hierarchy PH, P, #P, PP, NL, L and #L. During the study of these classes, problems related to propositional formulas were often identified to be complete problems for these classes. Hence some questions arise: Why is SAT so hard to solve? Are there modifications of SAT which are complete for other well-known complexity classes? In the context of these questions a result by E. Post is extremely useful. He identified and characterized all classes of Boolean functions being closed under superposition. It is possible to study problems which are connected to generalized propositional logic by using this result, which was done in this thesis. Hence, many different problems connected to propositional logic were studied and classified with respect to their computational complexity, clearing the borderline between easy and hard problems. N2 - In den letzten 40 Jahren hat sich die Komplexitätstheorie zu einem reichen und mächtigen Gebiet innerhalb der theoretischen Informatik entwickelt. Dabei ist die hauptsächliche Aufgabenstellung der Komplexitätstheorie die Klassifikation von Problemen bezüglich des Bedarfs von Rechenzeit oder Speicherplatz zu ihrer Lösung. Um die Komplexität von Problemen (d.h. den Bedarf von Resourcen) einzuordnen, werden Probleme mit ähnlichem Ressourcenbedarf in gleiche sogenannte Komplexitätsklassen einsortiert. Bei der systematischen Untersuchung einer Vielzahl von praktisch relevanten Problemen wurden jedoch keine effizienten Algorithmen für viele der untersuchten Probleme gefunden und es ist unklar, ob solche Algorithmen überhaupt existieren. Ein Durchbruch bei der Untersuchung dieser Problematik war die Einführung der Komplexitätsklassen P und NP und die Identifizierung von schwersten Problemen in NP. Diese schwierigsten Probleme von NP sind heute als sogenannte NP-vollständige Probleme bekannt. Ein prominentes Beispiel für ein NP-vollständiges Problem ist das Erfüllbarkeitsproblem für aussagenlogische Formeln (SAT). Hier ist eine aussagenlogische Formel als Eingabe gegeben und es muss bestimmt werden, ob eine Belegung der Wahrheitswertevariablen existiert, so dass diese Belegung die gegebene Formel erfüllt. Das intensive Studium der Klasse NP führte zu einer Vielzahl von anderen Komplexitätsklassen, wie z.B. die der Polynomialzeithierarchie PH, P, #P, PP, NL, L oder #L. Beim Studium dieser Klassen wurden sehr oft Probleme im Zusammenhang mit aussagenlogischen Formeln als schwierigste (vollständige) Probleme für diese Klassen identifiziert. Deshalb stellt sich folgende Frage: Welche Eigenschaften des Erfüllbarkeitsproblems SAT bewirken, dass es eines der schwersten Probleme der Klasse NP ist? Gibt es Einschränkungen oder Verallgemeinerungen des Erfüllbarkeitsproblems, die vollständig für andere bekannte Komplexitätsklassen sind? Im Zusammenhang mit solchen Fragestellungen ist ein Ergebnis von E. Post von extremem Nutzen. Er identifizierte und charakterisierte alle Klassen von Booleschen Funktionen, die unter Superposition abgeschlossen sind. Mit Hilfe dieses Resultats ist es möglich, Probleme im Zusammenhang mit verallgemeinerten Aussagenlogiken zu studieren, was in der vorliegenden Arbeit durchgeführt wurde. Dabei wurde eine Vielzahl von verschiedenen Problemen, die in Zusammenhang mit der Aussagenlogik stehen, studiert und bezüglich ihrer Komplexität klassifiziert. Dadurch wird die Grenzlinie zwischen einfach lösbaren Problemen und schweren Problemen sichtbar. KW - Erfüllbarkeitsproblem KW - Komplexitätstheorie KW - Boolesche Funktionen KW - Isomorphie KW - abgeschlossene Klassen KW - Zählprobleme KW - Computational complexity KW - Boolean functions KW - Boolean isomorphism KW - Boolean equivalence KW - Dichotomy KW - counting problems Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74 ER - TY - THES A1 - Kosub, Sven T1 - Complexity and Partitions T1 - Komplexität von Partitionen N2 - Computational complexity theory usually investigates the complexity of sets, i.e., the complexity of partitions into two parts. But often it is more appropriate to represent natural problems by partitions into more than two parts. A particularly interesting class of such problems consists of classification problems for relations. For instance, a binary relation R typically defines a partitioning of the set of all pairs (x,y) into four parts, classifiable according to the cases where R(x,y) and R(y,x) hold, only R(x,y) or only R(y,x) holds or even neither R(x,y) nor R(y,x) is true. By means of concrete classification problems such as Graph Embedding or Entailment (for propositional logic), this thesis systematically develops tools, in shape of the boolean hierarchy of NP-partitions and its refinements, for the qualitative analysis of the complexity of partitions generated by NP-relations. The Boolean hierarchy of NP-partitions is introduced as a generalization of the well-known and well-studied Boolean hierarchy (of sets) over NP. Whereas the latter hierarchy has a very simple structure, the situation is much more complicated for the case of partitions into at least three parts. To get an idea of this hierarchy, alternative descriptions of the partition classes are given in terms of finite, labeled lattices. Based on these characterizations the Embedding Conjecture is established providing the complete information on the structure of the hierarchy. This conjecture is supported by several results. A natural extension of the Boolean hierarchy of NP-partitions emerges from the lattice-characterization of its classes by considering partition classes generated by finite, labeled posets. It turns out that all significant ideas translate from the case of lattices. The induced refined Boolean hierarchy of NP-partitions enables us more accuratly capturing the complexity of certain relations (such as Graph Embedding) and a description of projectively closed partition classes. N2 - Die klassische Komplexitätstheorie untersucht in erster Linie die Komplexität von Mengen, d.h. von Zerlegungen (Partitionen) einer Grundmenge in zwei Teile. Häufig werden aber natürliche Fragestellungen viel angemessener durch Zerlegungen in mehr als zwei Teile abgebildet. Eine besonders interessante Klasse solcher Fragestellungen sind Klassifikationsprobleme für Relationen. Zum Beispiel definiert eine Binärrelation R typischerweise eine Zerlegung der Menge aller Paare (x,y) in vier Teile, klassifizierbar danach, ob R(x,y) und R(y,x), R(x,y) aber nicht R(y,x), nicht R(x,y) aber dafür R(y,x) oder weder R(x,y) noch R(y,x) gilt. Anhand konkreter Klassifikationsprobleme, wie zum Beispiel der Einbettbarkeit von Graphen und der Folgerbarkeit für aussagenlogische Formeln, werden in der Dissertation Instrumente für eine qualitative Analyse der Komplexität von Partitionen, die von NP-Relationen erzeugt werden, in Form der Booleschen Hierarchie der NP-Partitionen und ihrer Erweiterungen systematisch entwickelt. Die Boolesche Hierarchie der NP-Partitionen wird als Verallgemeinerung der bereits bekannten und wohluntersuchten Boolesche Hierarchie über NP eingeführt. Während die letztere Hierarchie eine sehr einfache Struktur aufweist, stellt sich die Boolesche Hierarchie der NP-Partitionen im Falle von Zerlegungen in mindestens 3 Teile als sehr viel komplizierter heraus. Um einen Überblick über diese Hierarchien zu erlangen, werden alternative Beschreibungen der Klassen der Hierarchien mittels endlicher, bewerteter Verbände angegeben. Darauf aufbauend wird die Einbettungsvermutung aufgestellt, die uns die vollständige Information über die Struktur der Hierarchie liefert. Diese Vermutung wird mit verschiedene Resultaten untermauert. Eine Erweiterung der Booleschen Hierarchie der NP-Partitionen ergibt sich auf natürliche Weise aus der Charakterisierung ihrer Klassen durch Verbände. Dazu werden Klassen betrachtet, die von endlichen, bewerteten Halbordnungen erzeugt werden. Es zeigt sich, dass die wesentlichen Konzepte vom Verbandsfall übertragen werden können. Die entstehende Verfeinerung der Booleschen Hierarchie der NP-Partitionen ermöglicht die exaktere Analyse der Komplexität bestimmter Relationen (wie zum Beispiel der Einbettbarkeit von Graphen) und die Beschreibung projektiv abgeschlossener Partitionenklassen. KW - Partition KW - Boolesche Hierarchie KW - Komplexitätsklasse NP KW - Theoretische Informatik KW - Komplexitätstheorie KW - NP KW - Boolesche Hierarchie KW - Partitionen KW - Verbände KW - Halbordnungen KW - Theoretical computer science KW - computational complexity KW - NP KW - Boolean hierarchy KW - partitions KW - lattices KW - posets Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2808 ER - TY - THES A1 - Wirth, Hans-Christoph T1 - Multicriteria Approximation of Network Design and Network Upgrade Problems T1 - Mehrkriterien-Approximation von Netzwerk-Design- und Netzwerk-Ausbau-Problemen N2 - Network planning has come to great importance during the past decades. Today's telecommunication, traffic systems, and logistics would not have been evolved to the current state without careful analysis of the underlying network problems and precise implementation of the results obtained from those examinations. Graphs with node and arc attributes are a very useful tool to model realistic applications, while on the other hand they are well understood in theory. We investigate network design problems which are motivated particularly from applications in communication networks and logistics. Those problems include the search for homogeneous subgraphs in edge labeled graphs where either the total number of labels or the reload cost are subject to optimize. Further, we investigate some variants of the dial a ride problem. On the other hand, we use node and edge upgrade models to deal with the fact that in many cases one prefers to change existing networks rather than implementing a newly computed solution from scratch. We investigate the construction of bottleneck constrained forests under a node upgrade model, as well as several flow cost problems under a edge based upgrade model. All problems are examined within a framework of multi-criteria optimization. Many of the problems can be shown to be NP-hard, with the consequence that, under the widely accepted assumption that P is not equal to NP, there cannot exist efficient algorithms for solving the problems. This motivates the development of approximation algorithms which compute near-optimal solutions with provable performance guarantee in polynomial time. N2 - Netzplanung hat in den vergangenen Jahrzehnten an Bedeutung zugenommen. Der heutige Stand im Bereich von Telekommunikation, Verkehrsnetzen und in der Logistik wäre nicht in dem Maße erreicht worden, wenn nicht die zugrundeliegenden Netzplanungsprobleme sorgfältig analysiert und die daraus gewonnenen Erkenntnisse in die Realisierung eingeflossen wären. Für die Modellierung der durch die Praxis vorgegebenen Probleme erweisen sich Graphen mit Knoten- und Kantenbewertungen als gut geeignet, zumal diese Strukturen auch in der Theorie bereits gut untersucht sind. Wir betrachten Netzwerk-Design-Probleme aus dem Bereich der Planung von Kommunikations- und Logistiknetzwerken. Gegenstand ist zunächst die Suche nach homogenen Teilgraphen in Graphen mit Kantenlabels, wobei einerseits die Gesamtszahl der benutzten Labels minimiert wird, andererseits die Kosten unter einem Umladekosten-Modell optimiert werden. Weiter werden einige Varianten des Dial-A-Ride-Problems untersucht. Im zweiten Teil der Arbeit werden Netzwerk-Ausbau-Probleme betrachtet. Dies trägt der Tatsache Rechung, dass in vielen praktischen Fällen nur die Abänderung bestehender Netze und nicht die Neukonstruktion von Netzen in Frage kommt. Alle Probleme werden im Rahmen der Mehrkriterien-Optimierung betrachtet. Viele der betrachteten Probleme lassen sich als NP-hart nachweisen. Dies hat zur Folge, dass es - unter der gängigen Annahme, dass P ungleich NP ist - keine effizienten Lösungsalgorithmen geben kann. Daher entwickeln wir Approximationsalgorithmen, die in Polynomialzeit Näherungslösungen mit beweisbarer Gütegarantie berechnen. KW - Netzplantechnik KW - Rechnernetz KW - Approximation KW - network design KW - network upgrade KW - approximation algorithms KW - edge labeled graphs KW - reload cost KW - spanning tree KW - dial a ride KW - constrained forest Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2845 ER - TY - THES A1 - Glaßer, Christian T1 - Forbidden-Patterns and Word Extensions for Concatenation Hierarchies T1 - Verbotsmuster und Worterweiterungen für Konkatenationshierarchien N2 - Starfree regular languages can be build up from alphabet letters by using only Boolean operations and concatenation. The complexity of these languages can be measured with the so-called dot-depth. This measure leads to concatenation hierarchies like the dot-depth hierarchy (DDH) and the closely related Straubing-Thérien hierarchy (STH). The question whether the single levels of these hierarchies are decidable is still open and is known as the dot-depth problem. In this thesis we prove/reprove the decidability of some lower levels of both hierarchies. More precisely, we characterize these levels in terms of patterns in finite automata (subgraphs in the transition graph) that are not allowed. Therefore, such characterizations are called forbidden-pattern characterizations. The main results of the thesis are as follows: forbidden-pattern characterization for level 3/2 of the DDH (this implies the decidability of this level) decidability of the Boolean hierarchy over level 1/2 of the DDH definition of decidable hierarchies having close relations to the DDH and STH Moreover, we prove/reprove the decidability of the levels 1/2 and 3/2 of both hierarchies in terms of forbidden-pattern characterizations. We show the decidability of the Boolean hierarchies over level 1/2 of the DDH and over level 1/2 of the STH. A technique which uses word extensions plays the central role in the proofs of these results. With this technique it is possible to treat the levels 1/2 and 3/2 of both hierarchies in a uniform way. Furthermore, it can be used to prove the decidability of the mentioned Boolean hierarchies. Among other things we provide a combinatorial tool that allows to partition words of arbitrary length into factors of bounded length such that every second factor u leads to a loop with label u in a given finite automaton. N2 - Sternfreie reguläre Sprachen können aus Buchstaben unter Verwendung Boolescher Operationen und Konkatenation aufgebaut werden. Die Komplexität solcher Sprachen lässt sich durch die sogenannte "Dot-Depth" messen. Dieses Maß führt zu Konkatenationshierarchien wie der Dot-Depth-Hierachie (DDH) und der Straubing-Thérien-Hierarchie (STH). Die Frage nach der Entscheidbarkeit der einzelnen Stufen dieser Hierarchien ist als (immer noch offenes) Dot-Depth-Problem bekannt. In dieser Arbeit beweisen wir die Entscheidbarkeit einiger unterer Stufen beider Hierarchien. Genauer gesagt charakterisieren wir diese Stufen durch das Verbot von bestimmten Mustern in endlichen Automaten. Solche Charakterisierungen werden Verbotsmustercharakterisierungen genannt. Die Hauptresultate der Arbeit lassen sich wie folgt zusammenfassen: Verbotsmustercharakterisierung der Stufe 3/2 der DDH (dies hat die Entscheidbarkeit dieser Stufe zur Folge) Entscheidbarkeit der Booleschen Hierarchie über der Stufe 1/2 der DDH Definition von entscheidbaren Hierarchien mit engen Verbindungen zur DDH und STH Darüber hinaus beweisen wir die Entscheidbarkeit der Stufen 1/2 und 3/2 beider Hierarchien (wieder mittels Verbotsmustercharakterisierungen) und die der Booleschen Hierarchien über den Stufen 1/2 der DDH bzw. STH. Dabei stützen sich die Beweise größtenteils auf eine Technik, die von Eigenschaften bestimmter Worterweiterungen Gebrauch macht. Diese Technik erlaubt eine einheitliche Vorgehensweise bei der Untersuchung der Stufen 1/2 und 3/2 beider Hierarchien. Außerdem wird sie in den Beweisen der Entscheidbarkeit der genannten Booleschen Hierarchien verwendet. Unter anderem wird ein kombinatorisches Hilfsmittel zur Verfügung gestellt, das es erlaubt, Wörter beliebiger Länge in Faktoren beschränkter Länge zu zerlegen, so dass jeder zweite Faktor u zu einer u-Schleife in einem gegebenen endlichen Automaten führt. KW - Automatentheorie KW - Formale Sprache KW - Entscheidbarkeit KW - Reguläre Sprache KW - Berechenbarkeit KW - Theoretische Informatik KW - reguläre Sprachen KW - endliche Automaten KW - Dot-Depth Problem KW - Entscheidbarkeit KW - Verbotsmuster KW - Worterweiterungen KW - Theoretical Computer Science KW - regular languages KW - finite automata KW - dot-depth problem KW - decidability KW - forbidden patterns KW - word extensions Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-1179153 ER - TY - THES A1 - Karch, Oliver T1 - Where am I? - Indoor localization based on range measurements T1 - Wo bin ich? - Lokalisation mit Hilfe von Entfernungsmesswerten N2 - Nowadays, robotics plays an important role in increasing fields of application. There exist many environments or situations where mobile robots instead of human beings are used, since the tasks are too hazardous, uncomfortable, repetitive, or costly for humans to perform. The autonomy and the mobility of the robot are often essential for a good solution of these problems. Thus, such a robot should at least be able to answer the question "Where am I?". This thesis investigates the problem of self-localizing a robot in an indoor environment using range measurements. That is, a robot equipped with a range sensor wakes up inside a building and has to determine its position using only its sensor data and a map of its environment. We examine this problem from an idealizing point of view (reducing it into a pure geometric one) and further investigate a method of Guibas, Motwani, and Raghavan from the field of computational geometry to solving it. Here, so-called visibility skeletons, which can be seen as coarsened representations of visibility polygons, play a decisive role. In the major part of this thesis we analyze the structures and the occurring complexities in the framework of this scheme. It turns out that the main source of complication are so-called overlapping embeddings of skeletons into the map polygon, for which we derive some restrictive visibility constraints. Based on these results we are able to improve one of the occurring complexity bounds in the sense that we can formulate it with respect to the number of reflex vertices instead of the total number of map vertices. This also affects the worst-case bound on the preprocessing complexity of the method. The second part of this thesis compares the previous idealizing assumptions with the properties of real-world environments and discusses the occurring problems. In order to circumvent these problems, we use the concept of distance functions, which model the resemblance between the sensor data and the map, and appropriately adapt the above method to the needs of realistic scenarios. In particular, we introduce a distance function, namely the polar coordinate metric, which seems to be well suited to the localization problem. Finally, we present the RoLoPro software where most of the discussed algorithms are implemented (including the polar coordinate metric). N2 - Heutzutage spielen autonome Roboter bei einer wachsenden Zahl von Anwendungsgebieten eine entscheidende Rolle. Sie werden überall dort anstelle von menschlichen Arbeitskräften eingesetzt, wo die jeweiligen Aufgaben für Menschen zu gefährlich, unangenehm, monoton oder schlicht zu teuer sind. Dabei sind die Autonomie und Mobilität des Roboters sehr oft grundlegend für eine gute Problemlösung. Ein solcher Roboter sollte also zumindest die Frage "Wo bin ich?" zufriedenstellend beantworten können. Diese Arbeit behandelt das Problem der Selbstlokalisation in einer Gebäudeumgebung mit Hilfe von Entfernungsmesswerten. Das heißt, ein Roboter - ausgestattet mit einem Entfernungssensor - wacht innerhalb eines Gebäudes auf und muss mit Hilfe seiner Sensordaten und einer Karte seiner Einsatzumgebung seine Position bestimmen. Wir betrachten eine idealisierte Variante dieser Aufgabe, die ein rein geometrisches Problem zum Inhalt hat, und untersuchen ein Verfahren von Guibas, Motwani und Raghavan aus dem Gebiet der Algorithmischen Geometrie, welches dieses löst. Hierbei spielen sogenannte Sichtbarkeitsskelette (vergröberte Darstellungen von Sichtbarkeitspolygonen) eine entscheidende Rolle. Im Hauptteil der Arbeit analysieren wir die Strukturen und die auftretenden Komplexitäten im Rahmen dieses Verfahrens. Es stellt sich heraus, dass die Hauptschwierigkeiten sogenannte überlappende Einbettungen von Skeletten in das Kartenpolygon zur Ursache haben, für die wir einige einschränkende Sichtbarkeitsbedingungen zeigen. Gestützt auf diese Resultate können wir die auftretenden Komplexitätsschranken dahingehend verbessern, dass wir diese nicht nur in Abhängigkeit der Gesamtzahl aller Kartenecken angeben, sondern in Abhängigkeit der Zahl der konkaven Ecken. Dies hat ebenfalls Auswirkungen auf die Worst-Case-Schranken für die Preprocessing-Komplexität des Verfahrens. Der zweite Teil der Arbeit vergleicht die anfangs gemachten idealisierenden Annahmen mit den Gegebenheiten realer Umgebungen und adressiert die auftretenden Probleme. Um diese zu umgehen verwenden wir das Konzept sogenannter Distanzfunktionen, welche die Ähnlichkeit zwischen den Sensordaten und der Karte modellieren, und passen das Verfahren auf geeignete Weise an die Bedürfnisse realistischer Szenarien an. Insbesondere führen wir eine Distanzfunktion ein - die Polarkoordinatenmetrik - welche sich für das Lokalisationsproblem besonders gut zu eignen scheint. Schlussendlich stellen wir die Software RoLoPro vor, in der die meisten der diskutierten Algorithmen (einschließlich der Polarkoordinatenmetrik) implementiert sind. KW - Autonomer Roboter KW - Mobiler Roboter KW - Lokalisation KW - Lokalisation KW - Autonomer Roboter KW - Sichtbarkeit KW - Ähnlichkeitsmaß KW - Algorithmische Geometrie KW - Localization KW - Autonomous Robot KW - Visibility KW - Similarity Measure KW - Computational Geometry Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8442 ER - TY - THES A1 - Höhn, Holger T1 - Multimediale, datenbankgestützte Lehr- und Lernplattformen T1 - Multimedia, Database Supported Teaching and Learning Environments N2 - Die Dissertation befaßt sich mit der Entwicklung einer multimedialen, datenbankgestützten Lehr- und Lernplattform. Die entwickelten Module ermöglichen und erweitern nicht nur die Möglichkeit des Selbststudiums für den Studenten sondern erleichtern auch die Arbeit der Dozenten. Außerdem wird auch die Zusammenarbeit und der Austausch von Lernobjekten zwischen verschiedenen Institutionen ermöglicht. In der Lehr- und Lernplattform können verschiedene Lernobjekt-Typen verwaltet werden. Exemplarisch wurden die Typen Bilder, 3D-Animationen, Vorlesungen, Lerntexte, Fallbeispiele und Quizelemente integriert. Die Lehr- und Lernplattform besteht aus drei Bausteinen: 1. In der Lernobjekt-Datenbank werden alle Lernobjekt-Typen und Lernobjekte verwaltet. 2. Autorenwerkzeuge dienen zur Erstellung von Lernobjekten. 3. In der Lernplattform werden die Lernobjekte den Studenten zum (Selbst-)Lernen präsentiert. Neben den Vorteilen, die der Einsatz von E-Learning im allgemeinen bietet, wie die flexible Lernorganisation oder die Nutzung von Lerninhalten unabhängig von Ort und Zeit, zeichnet sich die entwickelte Lehr- und Lernplattform besonders durch folgende Punkte aus: Generierung von Lerninhalten höherer Qualität durch multizentrische Expertenbündelung und Arbeitsteilung, Erweiterbarkeit auf andere, neue Lernobjekt-Typen, Verwaltbarkeit, Konsistenz, Flexibilität, geringer Verwaltungsaufwand, Navigationsmöglichkeiten für den Studenten, Personalisierbarkeit und Konformität zu internationalen Standards. Sowohl bei der Modellierung als auch bei der Umsetzung wurde darauf geachtet, möglichst gut die Anforderungen der Dermatologie bei gleichzeitiger Erweiterbarkeit auf andere, ähnliche Szenarien zu erfüllen. Besonders einfach sollte die Anpassung der Plattform für andere bildorientierte Disziplinen sein. N2 - In this thesis a multimedia teaching and learning environment was developed. The center of interest are learning objects which can be classified into different types. The types and objects are stored and adminstered in a database. As examples lectures, learning texts, 3D-animations, images, videos and quiz elements were integrated. For the generation of learning objects authoring tools were developed for each type. The teaching and learning environment offers the following features: lectureres are supported in preparing lectures. Because learning objects can be exchanged between different environments, the generation of "high quality" objects is encouraged. New types of learning objects can be integrated easily. Students are able to learn time-independent. The system was tested in dermatology, but the adaption to other, especially visually oriented disciplines is easy. KW - Multimedia KW - Anwendung KW - Forschung KW - Lehre KW - Lehre KW - Multimedia KW - Datenbanken KW - Lernen KW - Multimedia KW - Learning KW - Teaching KW - Databases Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4049 ER - TY - THES A1 - Schäfer, Dirk T1 - Globale Selbstlokalisation autonomer mobiler Roboter - Ein Schlüsselproblem der Service-Robotik T1 - The global self-localisation problem - a key problem in the field of service robotics N2 - Die Dissertation behandelt die Problemstellung der globalen Selbstlokalisation autonomer mobiler Roboter, welche folgendermaßen beschrieben werden kann: Ein mobiler Roboter, eingesetzt in einem Gebäude, kann unter Umständen das Wissen über seinen Standort verlieren. Man geht nun davon aus, dass dem Roboter eine Gebäudekarte als Modell zur Verfügung steht. Mit Hilfe eines Laser-Entfernungsmessers kann das mobile Gerät neue Informationen aufnehmen und damit bei korrekter Zuordnung zur Modellkarte geeignete hypothetische Standorte ermitteln. In der Regel werden diese Positionen aber mehrdeutig sein. Indem sich der Roboter intelligent in seiner Einsatzumgebung bewegt, kann er die ursprünglichen Sensordaten verifizieren und ermittelt im besten Fall seine tatsächliche Position.Für diese Problemstellung wird ein neuer Lösungsansatz in Theorie und Praxis präsentiert, welcher die jeweils aktuelle lokale Karte und damit alle Sensordaten mittels feature-basierter Matchingverfahren auf das Modell der Umgebung abbildet. Ein Explorationsalgorithmus bewegt den Roboter während der Bewegungsphase autonom zu Sensorpunkten, welche neue Informationen bereitstellen. Während der Bewegungsphase werden dabei die bisherigen hypothetischen Positionen bestärkt oder geschwächt, sodaß nach kurzer Zeit eine dominante Position, die tatsächliche Roboterposition,übrigbleibt. N2 - This thesis is dealing with the global self-localisation problem, which is known to be one of the hardest problems among autonomous mobile systems. The problem can be described as follows: A mobile robot agent has a map of the environment but does not know its position. It is equipped with ultransonic sensors and a laser range finder as main sensor. The goal of the robot agent is to recognize its true position within the environment.The level of complexity of this task increases with the size and also with the level of symmetry of the indoor environment. To cope with the problem a new approach will be presented in this thesis using state of the art map building and exploration algorithms as well as feature based localisation methods. Decomposition of the global map into a number of submaps, informative feature selection and multiple submap localisation queries ensure the road of success. The capability of the approach to global self-localising the robot is pointed out by several practical studies. KW - Mobiler Roboter KW - Autonomer Roboter KW - Lokalisation KW - Globale Selbstlokalisation KW - Mobile Roboter KW - Kartierung KW - Feature-Matching KW - Gllobal self-localisation KW - mobile robots KW - slam KW - feature-matching Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7601 ER - TY - THES A1 - Kaußner, Armin T1 - Dynamische Szenerien in der Fahrsimulation T1 - Dynamic scenarios for driving simulation N2 - In der Arbeit wird ein neues Konzept für Fahrsimulator-Datenbasen vorgestellt. Der Anwender entwirft eine auf seine Fragestellung zugeschnittene Datenbasis mithilfe einer einfachen Skriptsprache. Das Straßennetzwerk wird auf einer topologischen Ebene repäsentiert. In jedem Simulationsschritt wird hieraus im Sichtbarkeitsbereich des Fahrers die geometrische Repäsentation berechnet. Die für den Fahrer unsichtbaren Teile des Straßenetzwerks können während der Simulation verändert werden. Diese Veränderungen können von der Route des Fahrers oder von den in der Simulation erhobenen Messerten abhängen. Zudem kann der Anwender das Straßennetzwerk interaktiv verändern. Das vorgestellte Konzept bietet zahlreiche Möglichkeiten zur Erzeugung reproduzierbarer Szenarien für Experimente in Fahrsimulatoren. N2 - This work presents a new concept for driving simulator databases. Using a simple scripting language the user defines a database tailored for his experiment. The road network is represented in a topological way. Through this the geometrical representation is computed during the simulation in a small area surrounding the driver, including all that is visible for the driver. The parts of the road network that are not visible for the driver can be changed during simulation. This modification can depend on the route the driver takes or on measures available in the simulation. Moreover, the user can change the road network interactively. The presented concept offers various advantages for the design of reproducible scenarios in driving simulators. KW - Straßenverkehr KW - Simulation KW - Fahrsimulator KW - Fahrsimulation KW - Datenbasis KW - Straßennetzwerk KW - Szenariogenerierung KW - driving simulation KW - database KW - road network KW - scenario creation Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8286 ER - TY - THES A1 - Wolz, Frank T1 - Ein generisches Konzept zur Modellierung und Bewertung feldprogrammierbarer Architekturen T1 - A generic concept for modelling and evaluating field-programmable architectures N2 - Gegenstand der Arbeit stellt eine erstmalig unternommene, architekturübergreifende Studie über feldprogrammierbare Logikbausteine zur Implementierung synchroner Schaltkreise dar. Zunächst wird ein Modell für allgemeine feldprogrammiebare Architekturen basierend auf periodischen Graphen definiert. Schließlich werden Bewertungsmaße für Architekturen und Schaltkreislayouts angegeben zur Charakterisierung struktureller Eigenschaften hinsichtlich des Verhaltens in Chipflächenverbrauch und Signalverzögerung. Ferner wird ein generisches Layout-Werkzeug entwickelt, das für beliebige Architekturen und Schaltkreise Implementierungen berechnen und bewerten kann. Abschließend werden neun ressourcenminimalistische Architekturen mit Maschen- und mit Inselstruktur einander gegenübergestellt. N2 - This work presents a first architecture-spreading study on field-programmable logical devices leaving the beaten tracks of commercial architecture improvements. After a formal model for general field-programmable architectures based on periodic graphs has been given, some feasible evaluation metrics for architectures and circuit layouts are defined characterizing structural properties of architectures in respect of chip area usage and performance. Then, a generic layout tool is developped working on arbitrary architecures and circuits. Finally, nine resource minimal mesh- and island-style architectures are compared. KW - Gay-Array-Bauelement KW - Programmierbare logische Anordnung KW - Field programmable gate array KW - Feldprogrammierbare Architekturen KW - Field-programmable Gate Arrays KW - field-programmable architectures KW - field-programmable gate arrays Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7944 ER - TY - GEN A1 - Rossa, Christian T1 - Inside 2003: IT-Sicherheit T1 - Inside 2003: IT Security N2 - Einzelne Artikel zum Thema IT-Sicherheit an der Universität Würzburg N2 - Some articles concerning IT security at the University of Wuerzburg KW - Datenübertragung ; Datensicherung ; Informationstechnik ; Internet ; Computersicherheit KW - IT-Sicherheit KW - Firewall KW - Computervirus KW - Spam-Mail KW - Webmail-System KW - IT Security KW - firewall KW - computer virus KW - spam mail KW - webmail system Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-6061 ER - TY - THES A1 - Kluge, Boris T1 - Motion coordination for a mobile robot in dynamic environments N2 - Generating coordinated motion for a mobile robot operating in natural, continuously changing environments among moving obstacles such as humans is a complex task which requires the solution of various sub problems. In this thesis, we will cover the topics of perception and navigation in dynamic environments, as well as reasoning about the motion of the obstacles and of the robot itself. Perception is mainly considered for a laser range finder, and an according method for obstacle detection and tracking is proposed. Network optimization algorithms are used for data association in the tracking step, resulting in considerable robustness with respect to clutter by small objects. Navigation in general is accomplished using an adaptation of the velocity obstacle approach to the given vehicle kinematics, and cooperative motion coordination between the robot and a human guide is achieved using an appropriate selection rule for collision-free velocities. Next, the robot is enabled to compare its path to the path of a human guide using one of a collection of presented distance measures, which permits the detection of exceptional conditions. Furthermore, a taxonomy for the assessment of situations concerning the robot is presented, and following a summary of existing approaches to more intelligent and comprehensive perception, we propose a method for obstruction detection. Finally, a new approach to reflective navigation behaviors is described where the robot reasons about intelligent moving obstacles in its environment, which allows to adjust the character of the robot motion from regardful and defensive to more self-confident and aggressive behaviors. N2 - Die Realisierung einer koordinierten und effektiven Fortbewegung für einen mobilen Roboter in natürlichen, sich kontinuierlich verändernden Umgebungen unter sich ebenso bewegenden Hindernissen ist eine komplexe Aufgabe, die die Lösung einer Reihe von Unterproblemen voraussetzt. Die vorliegende Arbeit beschäftigt sich sowohl mit den Themen der Wahrnehmung und Fortbewegung in veränderlichen Umgebungen, als auch mit Methoden zur Analyse der Hindernisbewegungen in Zusammenhang mit der Roboterbewegung selbst. Die Wahrnehmung wird in erster Linie anhand von Laserscannern betrachtet, und ein entsprechendes Verfahren zur Hindernisdetektion und -verfolung wird vorgestellt. Dabei werden Verfahren der globalen Netzwerkoptimierung eingesetzt, um Korrespondenzen zwischen Objekten aus den Einzelbildern herzustellen, was sich positiv auf die Robustheit gegenüber Störungen durch sporadische kleine Objekte auswirkt. Die Navigation basiert auf einer Adaption des sog. "Velocity Obstacle" Ansatzes auf die vorhandene Fahrzeugkinematik, und eine kooperative Bewegungskoordination (Roboter begleitet Mensch) wird durch eine geeignete Auswahlregel für kollisionsfreie Geschwindigkeiten realisiert. Anschließend werden verschiedene Distanzmaße eingeführt, anhand derer sich etwa der Pfad des Roboters mit dem Pfad seiner Begleitperson vergleichen lässt. Weiter wird eine Klassifizierung von Situationen vorgenommen, in die der Roboter potentiell involviert sein kann, und nach einer Übersicht über existierende Ansätze zur automatischen Intentionserkennung wird ein praktikabler Ansatz zur Erkennung gezielter Behinderungen eines mobilen Roboters vorgestellt. Die Arbeit schließt mit einem neuen Ansatz der Bewegungsplanung in dynamischen Umgebungen, der auf rekursiven Modellen des Roboters von seinem Gegenüber basiert, d.h. der Roboter berechnet zunächst, wie er sich in der Situation des (intelligenten, beweglichen) Hindernisses fortbewegen würde, und bezieht dies in die Entscheidung über die eigene Fortbewegung mit ein. Je nach Rekursionstiefe entstehen hierdurch Verhaltensweisen unterschiedlichen Charakters für den Roboter. T2 - Bewegungskoordination für einen mobilen Roboter in dynamischen Umgebungen KW - Bewegungsablauf KW - Roboter KW - Roboter KW - Bewegungsplanung KW - dynamische Umgebungen KW - Robot KW - Motion Planning KW - Dynamic Environments Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-15508 ER - TY - THES A1 - Menth, Michael T1 - Efficient admission control and routing for resilient communication networks T1 - Effiziente Zugangskontrolle und Verkehrslenkung für ausfallsichere Kommunikationsnetze N2 - This work is subdivided into two main areas: resilient admission control and resilient routing. The work gives an overview of the state of the art of quality of service mechanisms in communication networks and proposes a categorization of admission control (AC) methods. These approaches are investigated regarding performance, more precisely, regarding the potential resource utilization by dimensioning the capacity for a network with a given topology, traffic matrix, and a required flow blocking probability. In case of a failure, the affected traffic is rerouted over backup paths which increases the traffic rate on the respective links. To guarantee the effectiveness of admission control also in failure scenarios, the increased traffic rate must be taken into account for capacity dimensioning and leads to resilient AC. Capacity dimensioning is not feasible for existing networks with already given link capacities. For the application of resilient NAC in this case, the size of distributed AC budgets must be adapted according to the traffic matrix in such a way that the maximum blocking probability for all flows is minimized and that the capacity of all links is not exceeded by the admissible traffic rate in any failure scenario. Several algorithms for the solution of that problem are presented and compared regarding their efficiency and fairness. A prototype for resilient AC was implemented in the laboratories of Siemens AG in Munich within the scope of the project KING. Resilience requires additional capacity on the backup paths for failure scenarios. The amount of this backup capacity depends on the routing and can be minimized by routing optimization. New protection switching mechanisms are presented that deviate the traffic quickly around outage locations. They are simple and can be implemented, e.g, by MPLS technology. The Self-Protecting Multi-Path (SPM) is a multi-path consisting of disjoint partial paths. The traffic is distributed over all faultless partial paths according to an optimized load balancing function both in the working case and in failure scenarios. Performance studies show that the network topology and the traffic matrix also influence the amount of required backup capacity significantly. The example of the COST-239 network illustrates that conventional shortest path routing may need 50% more capacity than the optimized SPM if all single link and node failures are protected. N2 - Diese Arbeit gliedert sich in zwei Hauptteile: Ausfallsichere Zugangskontrolle und ausfallsichere Verkehrslenkung. Die Arbeit beschreibt zu Beginn den Stand der Technik für Dienstgütemechanismen in Kommunikationsnetzen und nimmt eine Kategorisierung von Zugangskontrollmethoden vor. Diese Ansätze werden hinsichtlich ihrer potentiellen Auslastung der Leitungskapaztitäten untersucht, indem die Kapazität für ein Netz mit gegebnener Topology, Verkehrsmatrix und geforderten Flussblockierwahrscheinlichkeiten dimensioniert wird. Im Falle eines Fehlers werden betroffene Flüsse automatisch über Ersatzpfade umgeleitet, was die Verkehrslast auf deren Übertragungsleitungen erhöht. Um die Wirksamkeit der Zugangskontrolle auch in Fehlerfällen zu gewährleisten, muss diese erhöhte Verkehrslast bei der Dimensionierung berücksichtigt werden, was zu einer ausfallsicheren Zugangskontrolle führt. Kapazitätsdimensionierung ist in bereits existierenden Netzen mit festen Linkbandbreiten nicht mehr möglich. Für die Anwendung von ausfallsicherer Zugangskontrolle in diesem Fall muss die Größe von verteilten Zugangskontrollbudgets gemäß der Verkehrsmatrix so angepasst werden, dass die maximale Blockierwahrscheinlichkeit aller Flüsse minimiert wird und die Kapazität aller Links in keinem Fehlerfall durch die zulässige Verkehrrate überschritten wird. Es werden unterschiedliche Algorithmen für die Lösung dieses Problems vorgeschlagen und hinsichtlich ihrer Effizienz und Fairness verglichen. Ein Prototyp für ausfallsichere Zugangskontrolle wurde im Rahmen des KING-Projektes in den Labors der Siemens AG in München implementiert. Ausfallsicherheit benötigt Zusatzkapazitäten auf den Ersatzpfaden für Fehlerfälle. Die Menge der Zusatzkapazität hängt von der Verkehrslenkung ab und kann durch Optimierung verringert werden. Es werden neue Mechanismen für Ersatzschaltungen vorgestellt, die den Verkehr schnell um Fehlerstellen im Netz herumleiten können. Sie zeichnen sich durch ihre Einfachheit aus und können z.B. in MPLS-Technologie implementiert werden. Der "Self-Protecting Multi-Path" (SPM) ist ein Multipfad, der aus disjunkten Teilpfaden besteht. Der Verkehr wird sowohl im Normalbetrieb als auch in Ausfallszenarien über alle intakten Teilpfade gemäß einer optimierten Lastverteilungsfunktion weitergeleitet. Leistungsuntersuchungen zeigen, dass die Menge an benötigter Zusatzkapazität deutlich von der Netztopologie und der Verkehrsmatrix abhängt. Das Beispiel des COST-239 Netzes veranschaulicht, dass herkömmliche Verkehrslenkung auf den kürzesten Wegen 50% mehr Kapazität benötigen kann als der optimierte SPM, wenn alle einzelnen Übertragungsleitungs- und Vermittlungsknotenausfälle geschützt werden. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/04 KW - Kommunikation KW - Netzwerk KW - Ausfallsicheres System KW - Kommunikationsnetze KW - Ausfallsicherheit KW - Zugangskontrolle KW - Verkehrslenkung KW - Communication Networks KW - Resilience KW - Admission Control KW - Routing Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9949 ER - TY - RPRT A1 - Rossa, Christian T1 - Inside 2004: Multimedia und Services T1 - Inside 2004: Multimedia and Services N2 - Einzelne Artikel zu den Themen Multimedia, Dienstleistungen, IT-Sicherheit und Hochschulnetz des Rechenzentrums der Universität Würzburg N2 - Some articles concerning multimedia, services, IT security and university network in the computer center of the University of Wuerzburg KW - Multimedia KW - Dienstleistungen KW - IT-Sicherheit KW - Hochschulnetz KW - Multimedia KW - Services KW - IT Security KW - university network Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8616 ER - TY - THES A1 - Heck, Klaus T1 - Wireless LAN performance studies in the context of 4G networks N2 - Wireless communication is nothing new. The first data transmissions based on electromagnetic waves have been successfully performed at the end of the 19th century. However, it took almost another century until the technology was ripe for mass market. The first mobile communication systems based on the transmission of digital data were introduced in the late 1980s. Within just a couple of years they have caused a revolution in the way people communicate. The number of cellular phones started to outnumber the fixed telephone lines in many countries and is still rising. New technologies in 3G systems, such as UMTS, allow higher data rates and support various kinds of multimedia services. Nevertheless, the end of the road in wireless communication is far from being reached. In the near future, the Internet and cellular phone systems are expected to be integrated to a new form of wireless system. Bandwidth requirements for a rich set of wireless services, e.g.\ video telephony, video streaming, online gaming, will be easily met. The transmission of voice data will just be another IP based service. On the other hand, building such a system is by far not an easy task. The problems in the development of the UMTS system showed the high complexity of wireless systems with support for bandwidth-hungry, IP-based services. But the technological challenges are just one difficulty. Telecommunication systems are planned on a world-wide basis, such that standard bodies, governments, institutions, hardware vendors, and service providers have to find agreements and compromises on a number of different topics. In this work, we provide the reader with a discussion of many of the topics involved in the planning of a Wireless LAN system that is capable of being integrated into the 4th generation mobile networks (4G) that is being discussed nowadays. Therefore, it has to be able to cope with interactive voice and video traffic while still offering high data rates for best effort traffic. Let us assume a scenario where a huge office complex is completely covered with Wireless LAN access points. Different antenna systems are applied in order to reduce the number of access points that are needed on the one hand, while optimizing the coverage on the other. No additional infrastructure is implemented. Our goal is to evaluate whether the Wireless LAN technology is capable of dealing with the various demands of such a scenario. First, each single access point has to be capable of supporting best-effort and Quality of Service (QoS) demanding applications simultaneously. The IT infrastructure in our scenario consists solely of Wireless LAN, such that it has to allow users surfing the Web, while others are involved in voice calls or video conferences. Then, there is the problem of overlapping cells. Users attached to one access point produce interference for others. However, the QoS support has to be maintained, which is not an easy task. Finally, there are nomadic users, which roam from one Wireless LAN cell to another even during a voice call. There are mechanisms in the standard that allow for mobility, but their capabilities for QoS support are yet to be studied. This shows the large number of unresolved issues when it comes to Wireless LAN in the context of 4G networks. In this work we want to tackle some of the problems. KW - Drahtloses lokales Netz KW - Wireless LAN KW - Voice-over-IP (VoIP) KW - Quality-of-Service (QoS) KW - IEEE 802.11e KW - 4G Networks KW - Wireless LAN KW - Voice-over-IP (VoIP) KW - Quality-of-Service (QoS) KW - IEEE 802.11e KW - 4G Networks Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14896 ER - TY - THES A1 - Eichelberger, Holger T1 - Aesthetics and automatic layout of UML class diagrams T1 - Ästhetik und automatisches Layout von UML Klassendiagrammen N2 - In the last years, visual methods have been introduced in industrial software production and teaching of software engineering. In particular, the international standardization of a graphical software engineering language, the Unified Modeling Language (UML) was a reason for this tendency. Unfortunately, various problems exist in concrete realizations of tools, e.g. due to a missing compliance to the standard. One problem is the automatic layout, which is required for a consistent automatic software design. The thesis derives reasons and criteria for an automatic layout method, which produces drawings of UML class diagrams according to the UML specification and issues of human computer interaction, e.g. readability. A unique set of aesthetic criteria is combined from four different disciplines involved in this topic. Based on these aethetic rules, a hierarchical layout algorithm is developed, analyzed, measured by specialized measuring techniques and compared to related work. Then, the realization of the algorithm as a Java framework is given as an architectural description. Finally, adaptions to anticipated future changes of the UML, improvements of the framework and example drawings of the implementation are given. N2 - Visuelle Techniken im Software-Entwurf haben in den letzten Jahre Einzug in Industrie und Lehre gehalten. Begünstigt wurde dies durch die Unified Modeling Language (UML), eine international standardisierte, graphische Entwurfssprache. Dennoch klaffen weite Lücken bei der Umsetzung in konkrete Tools, teils an der Realisierung des Standards, insbesondere aber auch beim automatischen Layout, das für konsistenten (teil-)automatisierten Softwareentwurf unerlässlich ist. Die Arbeit stellt zunächst Gründe und Kriterien für ein standardkonformes, menschenlesbares automatisches Layout von UML Klassendiagrammen zusammen. Ästhetische Kriterien werden aus vier unterschiedlichen Fachdisziplinen destilliert und kombiniert. Basierend auf diesen Kriterien wird danach ein hierarchischer Layoutalgorithmus entwickelt, analysiert, mit speziellen Messverfahren vermessen und mit Konkurrenzalgorithmen verglichen. Im Anschluss daran wird die Realisierung des Algorithmus als Java-Framework im Rahmen einer Architekturbeschreibung diskutiert. Anpassungen an zukünftige Entwicklungen der UML, Weiterentwicklungen des Frameworks und Beispieldiagramme, die von der Implementierung generiert wurden, runden die Arbeit ab. KW - URL KW - Klassendiagramm KW - automatisches Layout KW - UML Klassendiagramm KW - semantische Ästhetik KW - Zeichnen von Graphen KW - computergestützte Softwaretechnik KW - automatic Layout KW - UML class diagram KW - semantical aesthetic KW - graph drawing KW - CASE Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14831 ER - TY - THES A1 - Böhler, Elmar T1 - Algebraic closures in complexity theory T1 - Algebraische Hüllen in der Komplexitätstheorie N2 - We use algebraic closures and structures which are derived from these in complexity theory. We classify problems with Boolean circuits and Boolean constraints according to their complexity. We transfer algebraic structures to structural complexity. We use the generation problem to classify important complexity classes. N2 - Algebraische Hüllen und Strukturen, die mit solchen zusammenhängen, werden für die Komplexitätstheorie genutzt. Es werden Probleme im Zusammenhang mit Booleschen Schaltkreisen und Constraint-Satisfaction Problemen komplexitätstheoretisch klassifiziert. Strukturen aus der Algebra werden auf die Strukturelle Komplexität übertragen. Das Generierungsproblem, wird zur Klassifikation wichtiger Komplexitätsklassen benutzt. KW - Komplexitätstheorie KW - Komplexitätstheorie KW - Clones KW - Generierungsproblem KW - Postsche Klassen KW - Complexity Theory KW - Clones KW - Generation Problem KW - Post's Classes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-16106 ER - TY - THES A1 - Betz, Christian T1 - Scalable authoring of diagnostic case based training systems T1 - Skalierbare Erstellung diagnostischer fallbasierter Trainingssysteme N2 - Diagnostic Case Based Training Systems (D-CBT) provide learners with a means to learn and exercise knowledge in a realistic context. In medical education, D-CBT Systems present virtual patients to the learners who are asked to examine, diagnose and state therapies for these patients. Due a number of conflicting and changing requirements, e.g. time for learning, authoring effort, several systems were developed so far. These systems range from simple, easy-to-use presentation systems to highly complex knowledge based systems supporting explorative learning. This thesis presents an approach and tools to create D-CBT systems from existing sources (documents, e.g. dismissal records) using existing tools (word processors): Authors annotate and extend the documents to model the knowledge. A scalable knowledge representation is able to capture the content on multiple levels, from simple to highly structured knowledge. Thus, authoring of D-CBT systems requires less prerequisites and pre-knowledge and is faster than approaches using specialized authoring environments. Also, authors can iteratively add and structure more knowledge to adapt training cases to their learners needs. The theses also discusses the application of the same approach to other domains, especially to knowledge acquisition for the Semantic Web. N2 - Fallbasierte diagnostische Trainingssysteme (FDT) ermöglichen es Lernern, Wissen durch Anwendung in einem realistischen Kontext zu erwerben und zu festigen. In der medizinischen Ausbildung präsentieren FDT Systeme virtuelle Patienten, an denen der Lerner die Auswahl und Interpretation der richtigen Untersuchungen, die Diagnostik und die Bestimmung geeigneter Therapien erlernen und üben kann. Eine Vielzahl von Anforderungen durch die Lerner und die Autoren solcher Systeme hat zur Entwicklung unterschiedlicher Trainingsumgebungen geführt. Darunter gibt es einfache, präsentationsorientierte Systeme ebenso wie komplexe wissensbasierte Systeme, die exploratives Lernern erlauben. Diese Dissertation untersucht einen Ansatz und Werkzeuge, um FDT Systeme aus vorhandenen Daten (d.h. Dokumenten, beispielsweise Entlassschreiben) und mit Hilfe bekannter Werkzeuge (d.h. Textverarbeitung) zu entwickeln: Die Autoren annotieren dazu die Dokumente, um die Fälle zu modellieren. Eine skalierbare Wissensrepräsentation kann das so extrahierte Wissen auf verschiedenen Ebenen erfassen, angefangen mit unstrukturierten Elementen bis zu Wissensmodellen mit kausalen Beziehungen. Autoren können mit Hilfe des vorgestellten Ansatzes fallbasierte diagnostische Trainingssysteme mit geringerem Vorwissen und schneller erstellen als mit Hilfe spezialisierter Autorensysteme. Dabei können die Autoren insbesondere die Fälle sukzessive mit weiterem Wissen anreichern und so auf die Anforderungen ihrer Lerner anpassen. In der Dissertation wird darüber hinaus die Anwendung des Ansatzes und der entstandenen Werkzeuge auf andere Domänen untersucht. Besonders interessant ist dabei die Anwendung in der Wissensakquisition für das Semantic Web. KW - Computerunterstütztes Lernen KW - Medizin KW - Wissensrepräsentation KW - Trainingssystem KW - agile Prozesse KW - Semantic Web KW - d3web.Train KW - knowledge representation KW - training systems KW - agile processes KW - semantic web KW - d3web.Train Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-17885 ER - TY - THES A1 - Binder, Andreas T1 - Die stochastische Wissenschaft und zwei Teilsysteme eines Web-basierten Informations- und Anwendungssystems zu ihrer Etablierung T1 - The stochastic science and two subsystems of a web-based information and application system for its establishment N2 - Das stochastische Denken, die Bernoullische Stochastik und dessen informationstechnologische Umsetzung, namens Stochastikon stellen die Grundlage für das Verständnis und die erfolgreiche Nutzung einer stochastischen Wissenschaft dar. Im Rahmen dieser Arbeit erfolgt eine Klärung des Begriffs des stochastischen Denkens, eine anschauliche Darstellung der von Elart von Collani entwickelten Bernoullischen Stochastik und eine Beschreibung von Stochastikon. Dabei werden sowohl das Gesamtkonzept von Stochastikon, sowie die Ziele, Aufgaben und die Realisierung der beiden Teilsysteme namens Mentor und Encyclopedia vorgestellt. Das stochastische Denken erlaubt eine realitätsnahe Sichtweise der Dinge, d.h. eine Sichtweise, die mit den menschlichen Beobachtungen und Erfahrungen im Einklang steht und somit die Unsicherheit über zukünftige Entwicklungen berücksichtigt. Der in diesem Kontext verwendete Begriff der Unsicherheit bezieht sich ausschließlich auf zukünftige Entwicklungen und äußert sich in Variabilität. Quellen der Unsicherheit sind einerseits die menschliche Ignoranz und andererseits der Zufall. Unter Ignoranz wird hierbei die Unwissenheit des Menschen über die unbekannten, aber feststehenden Fakten verstanden, die die Anfangsbedingungen der zukünftigen Entwicklung repräsentieren. Die Bernoullische Stochastik liefert ein Regelwerk und ermöglicht die Entwicklung eines quantitativen Modells zur Beschreibung der Unsicherheit und expliziter Einbeziehung der beiden Quellen Ignoranz und Zufall. Das Modell trägt den Namen Bernoulli-Raum und bildet die Grundlage für die Herleitung quantitativer Verfahren, um zuverlässige und genaue Aussagen sowohl über die nicht-existente zufällige Zukunft (Vorhersageverfahren), als auch über die unbekannte feststehende Vergangenheit (Messverfahren). Das Softwaresystem Stochastikon implementiert die Bernoullische Stochastik in Form einer Reihe autarker, miteinander kommunizierender Teilsysteme. Ziel des Teilsystems Encyclopedia ist die Bereitstellung und Bewertung stochastischen Wissens. Das Teilsystem Mentor dient der Unterstützung des Anwenders bei der Problemlösungsfindung durch Identifikation eines richtigen Modells bzw. eines korrekten Bernoulli-Raums. Der Lösungsfindungsprozess selber enthält keinerlei Unsicherheit. Die ganze Unsicherheit steckt in der Lösung, d.h. im Bernoulli-Raum, der explizit die vorhandene Unwissenheit (Ignoranz) und den vorliegenden Zufall abdeckend enthält. N2 - Stochastic thinking, Bernoulli stochastics and its information technological realization, called Stochastikon, represent the basis for understanding and successfully utilizing stochastic science. This thesis defines the concept of stochastic thinking, introduces Bernoulli stochastics, which has been developed by Elart von Collani, and describes the IT system Stochastikon. The concept and the design of Stochastikon are outlined and the aims, tasks and realizations of the two subsystems Mentor and Encyclopedia are given in detail. Stochastic thinking enables a realistic view of reality. This means a view, which is in agreement with observation and experience and, thus, takes into account uncertainty about future developments. In this context the term of uncertainty is used exclusively with respect to future development and materializes in variability. Sources of uncertainty are on the one hand human ignorance about fixed facts on the one hand and randomness on the other. Bernoulli stochastics makes available a set of rules for developing a quantitative model about uncertainty taking particularly into account the two sources ignorance and randomness. The model is called Bernoulli-Space, which is the basis for reliable and precise quantitative procedures for statements about the random future (prediction procedures) as well as about the unknown fixed past (measurement procedures). The software system, called Stochastikon, implements Bernoulli stochastics based on a set of self-sustained intercommunicating subsystems. The Subsystem Encyclopedia makes stochastical knowledge available, while the Subsystem Mentor supports the user for solving (stochastic) problems by identifying the correct model respectively correct Bernoulli-Space. The problem solving process is free of uncertainty, because all uncertainty is modelled by Bernoulli-space. KW - Stochastik KW - stochastisches Denken KW - Bernoullische Stochastik KW - Bernoulli-Raum KW - Stochastikon KW - stochastic thinking KW - Bernoulli stochastics KW - Bernoullispace KW - Stochastikon Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26146 ER - TY - THES A1 - Höhn, Winfried T1 - Mustererkennung in Frühdrucken T1 - Pattern Perception in Early Printed Books N2 - No abstract available KW - Mustererkennung KW - Frühdruck KW - pattern perception KW - early printed books Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-30429 ER - TY - THES A1 - Atzmüller, Martin T1 - Knowledge-Intensive Subgroup Mining - Techniques for Automatic and Interactive Discovery T1 - Wissensintensive Subgruppenentdeckung – Automatische und Interaktive Entdeckungsmethoden N2 - Data mining has proved its significance in various domains and applications. As an important subfield of the general data mining task, subgroup mining can be used, e.g., for marketing purposes in business domains, or for quality profiling and analysis in medical domains. The goal is to efficiently discover novel, potentially useful and ultimately interesting knowledge. However, in real-world situations these requirements often cannot be fulfilled, e.g., if the applied methods do not scale for large data sets, if too many results are presented to the user, or if many of the discovered patterns are already known to the user. This thesis proposes a combination of several techniques in order to cope with the sketched problems: We discuss automatic methods, including heuristic and exhaustive approaches, and especially present the novel SD-Map algorithm for exhaustive subgroup discovery that is fast and effective. For an interactive approach we describe techniques for subgroup introspection and analysis, and we present advanced visualization methods, e.g., the zoomtable that directly shows the most important parameters of a subgroup and that can be used for optimization and exploration. We also describe various visualizations for subgroup comparison and evaluation in order to support the user during these essential steps. Furthermore, we propose to include possibly available background knowledge that is easy to formalize into the mining process. We can utilize the knowledge in many ways: To focus the search process, to restrict the search space, and ultimately to increase the efficiency of the discovery method. We especially present background knowledge to be applied for filtering the elements of the problem domain, for constructing abstractions, for aggregating values of attributes, and for the post-processing of the discovered set of patterns. Finally, the techniques are combined into a knowledge-intensive process supporting both automatic and interactive methods for subgroup mining. The practical significance of the proposed approach strongly depends on the available tools. We introduce the VIKAMINE system as a highly-integrated environment for knowledge-intensive active subgroup mining. Also, we present an evaluation consisting of two parts: With respect to objective evaluation criteria, i.e., comparing the efficiency and the effectiveness of the subgroup discovery methods, we provide an experimental evaluation using generated data. For that task we present a novel data generator that allows a simple and intuitive specification of the data characteristics. The results of the experimental evaluation indicate that the novel SD-Map method outperforms the other described algorithms using data sets similar to the intended application concerning the efficiency, and also with respect to precision and recall for the heuristic methods. Subjective evaluation criteria include the user acceptance, the benefit of the approach, and the interestingness of the results. We present five case studies utilizing the presented techniques: The approach has been successfully implemented in medical and technical applications using real-world data sets. The method was very well accepted by the users that were able to discover novel, useful, and interesting knowledge. N2 - Data Mining wird mit großem Erfolg in vielen Domänen angewandt. Subgruppenentdeckung als wichtiges Teilgebiet des Data Mining kann zum Beispiel gut im Marketing, oder zur Qualitätskontrolle und Analyse in medizinischen Domänen eingesetzt werden. Das allgemeine Ziel besteht darin, potentiell nützliches and letztendlich interessantes Wissen zu entdecken. Jedoch können diese Anforderungen im praktischen Einsatz oft nicht erfüllt werden, etwa falls die eingesetzten Methoden eine schlechte Skalierbarkeit für größere Datensätze aufweisen, falls dem Benutzer zu viele Ergebnisse präsentiert werden, oder falls der Anwender viele der gefundenen Subgruppen-Muster schon kennt. Diese Arbeit stellt eine Kombination von automatischen und interaktiven Techniken vor, um mit den genannten Problemen besser umgehen zu können: Es werden automatische heuristische und vollständige Subgruppenentdeckungs-Verfahren diskutiert, und insbesondere der neuartige SD-Map Algorithmus zur vollständigen Subgruppenentdeckung vorgestellt der sowohl schnell als auch effektiv ist. Bezüglich der interaktiven Techniken werden Methoden zur Subgruppen-Introspektion und Analyse, und fortgeschrittene Visualisierungstechniken vorgestellt, beispielsweise die Zoomtable, die die für die Subgruppenentdeckung wichtigsten Parameter direkt visualisiert und zur Optimierung und Exploration eingesetzt werden kann. Zusätzlich werden verschiedene Visualisierungen zum Vergleich und zur Evaluation von Subgruppen beschrieben um den Benutzer bei diesen essentiellen Schritten zu unterstützen. Weiterhin wird leicht zu formalisierendes Hintergrundwissen vorgestellt, das im Subgruppenentdeckungsprozess in vielfältiger Weise eingesetzt werden kann: Um den Entdeckungsprozess zu fokussieren, den Suchraum einzuschränken, und letztendlich die Effizienz der Entdeckungsmethode zu erhöhen. Insbesondere wird Hintergrundwissen eingeführt, um die Elemente der Anwendungsdomäne zu filtern, um geeignete Abstraktionen zu definieren, Werte zusammenzufassen, und die gefundenen Subgruppenmuster nachzubearbeiten. Schließlich werden diese Techniken in einen wissensintensiven Prozess integriert, der sowohl automatische als auch interaktive Methoden zur Subgruppenentdeckung einschließt. Die praktische Bedeutung des vorgestellten Ansatzes hängt stark von den verfügbaren Werkzeugen ab. Dazu wird das VIKAMINE System als hochintegrierte Umgebung für die wissensintensive aktive Subgruppenentdeckung präsentiert. Die Evaluation des Ansatzes besteht aus zwei Teilen: Hinsichtlich einer Evaluation von Effizienz und Effektivität der Verfahren wird eine experimentelle Evaluation mit synthetischen Daten vorgestellt. Für diesen Zweck wird ein neuartiger in der Arbeit entwickelter Datengenerator angewandt, der eine einfache und intuitive Spezifikation der Datencharakteristiken erlaubt. Für die Evaluation des Ansatzes wurden Daten erzeugt, die ähnliche Charakteristiken aufweisen wie die Daten des angestrebten Einsatzbereichs. Die Ergebnisse der Evaluation zeigen, dass der neuartige SD-Map Algorithmus den anderen in der Arbeit beschriebenen Standard-Algorithmen überlegen ist. Sowohl hinsichtlich der Effizienz, als auch von Precision/Recall bezogen auf die heuristischen Algorithmen bietet SD-Map deutliche Vorteile. Subjektive Evaluationskriterien sind durch die Benutzerakzeptanz, den Nutzen des Ansatzes, und die Interessantheit der Ergebnisse gegeben. Es werden fünf Fallstudien für den Einsatz der vorgestellten Techniken beschrieben: Der Ansatz wurde in medizinischen und technischen Anwendungen mit realen Daten eingesetzt. Dabei wurde er von den Benutzern sehr gut angenommen, und im praktischen Einsatz konnte neuartiges, nützliches, und interessantes Wissen entdeckt werden. KW - Data Mining KW - Algorithmus KW - Visualisierung KW - Subgruppenentdeckung KW - Hintergrundwissen KW - Wissensendeckung KW - Data Mining KW - Visualisierung KW - Subgroup Mining KW - Background Knowledge KW - Knowledge Discovery KW - Data Mining KW - Visualization Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-21004 ER - TY - THES A1 - Binzenhöfer, Andreas T1 - Performance Analysis of Structured Overlay Networks T1 - Leistungsbewertung Strukturierter Overlay Netze N2 - Overlay networks establish logical connections between users on top of the physical network. While randomly connected overlay networks provide only a best effort service, a new generation of structured overlay systems based on Distributed Hash Tables (DHTs) was proposed by the research community. However, there is still a lack of understanding the performance of such DHTs. Additionally, those architectures are highly distributed and therefore appear as a black box to the operator. Yet an operator does not want to lose control over his system and needs to be able to continuously observe and examine its current state at runtime. This work addresses both problems and shows how the solutions can be combined into a more self-organizing overlay concept. At first, we evaluate the performance of structured overlay networks under different aspects and thereby illuminate in how far such architectures are able to support carrier-grade applications. Secondly, to enable operators to monitor and understand their deployed system in more detail, we introduce both active as well as passive methods to gather information about the current state of the overlay network. N2 - Unter einem Overlay Netz versteht man den Zusammenschluss mehrerer Komponenten zu einer logischen Topologie, die auf einer existierenden physikalischen Infrastruktur aufsetzt. Da zufällige Verbindungen zwischen den einzelnen Teilnehmern aber sehr ineffizient sind, wurden strukturierte Overlay Netze entworfen, bei denen die Beziehungen zwischen den einzelnen Teilnehmern fest vorgeschrieben sind. Solche strukturierten Mechanismen versprechen zwar ein großes Potential, dieses wurde aber noch nicht ausreichend untersucht bzw. wissenschaftlich nachgewiesen. In dieser Arbeit wird mit mathematischen Methoden und ereignisorientierter Simulation die Leistungsfähigkeit von strukturierten Overlay Netzen untersucht. Da diese stark von der aktuellen Situation im Overlay abhängt, entwickeln wir Methoden, mit denen sich sowohl passiv, als auch aktiv, wichtige Systemparameter zur Laufzeit abschätzen bzw. messen lassen. Zusammen führen die vorgeschlagenen Methoden zu selbstorganisierenden Mechanismen, die den aktuellen Zustand des Overlays überwachen, diesen bewerten und sich gegebenenfalls automatisch an die aktuellen Verhältnisse anpassen T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/08 KW - Overlay-Netz KW - Leistungsbewertung KW - Peer-to-Peer-Netz KW - Mathematisches Modell KW - Chord KW - Kademlia KW - DHT KW - Overlay KW - Chord KW - Kademlia KW - DHT Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26291 ER - TY - THES A1 - Herrler, Rainer T1 - Agentenbasierte Simulation zur Ablaufoptimierung in Krankenhäusern und anderen verteilten, dynamischen Umgebungen T1 - Agent based simulation of processes in hospitals and other distributed, dynamic environments. N2 - Verteilte dynamische Systeme unter lokalen und globalen Gesichtspunkten zu optimieren ist eine schwierige Aufgabe. Zwar sind grundsätzliche Auswirkungen einzelner Maßnahmen häufig bekannt, durch widerstrebende Ziele, Wechselwirkungen zwischen Prozessen und Nebenwirkungen von Maßnahmen ist ein analytisches Vorgehen bei der Optimierung nicht möglich. Besonders schwierig wird es, wenn lokale Einheiten einerseits ihre Ziele und Autonomie behalten sollen, aber durch zentrale Vorgaben bzw. Anreize so gesteuert werden sollen, dass ein übergeordnetes Ziel erreicht wird. Ein praktisches Beispiel dieses allgemeinen Optimierungsproblems findet sich im Gesundheitswesen. Das Management von modernen Kliniken ist stets mit dem Problem konfrontiert, die Qualität der Pflege zu gewährleisten und gleichzeitig kosteneffizient zu arbeiten. Hier gilt es unter gegeben Rahmenbedingungen und bei Respektierung der Autonomie der Funktionseinheiten, Optimierungsmaßnahmen zu finden und durchzuführen. Vorhandene Werkzeuge zur Simulation und Modellierung bieten für diese Aufgabe keine ausreichend guten Vorgehensmodelle und Modellierungsmechanismen. Die agentenbasierte Simulation ermöglicht die Abbildung solcher Systeme und die Durchführung von Simulationsexperimenten zur Bewertung einzelner Maßnahmen. Es werden Lösungswege und Werkzeuge vorgestellt und evaluiert, die den Benutzer bei der Formalisierung des Wissens und der Modellierung solch komplexer Szenarien unterstützen und ein systematisches Vorgehen zur Optimierung ermöglichen. N2 - To optimize distributed dynamic systems or organizations under local and global constraints is a difficult task. Although basic effects of single improvement steps are often known, it is difficult to examine a complex system with conflicting goals, interdependent processes and sideeffects. A special situation occurs, when local entities are supposed to keep autonomy but should be directed by a central instance, to reach a global goal. A concrete example of this optimization problem can be found in health care. The management of modern hospitals has to ensure the quality of service and at the same time work cost efficient. They want to find improvement steps, which on the one hand respect the typical local autonomy of functional units and on the other hand reduce cost factors like the avarage stay duration of patients. Existing tools for modelling and simulation don't provide adequate methodologies and techniques for this problem. Agent based simulation allowes to realize suitable models and finding improvement steps in simulation studies. New approaches and tools are presented and evaluated, that support users in knowledge formalization and model building. KW - Simulation KW - Prozessoptimierung KW - Modellierung KW - Mehragentensystem KW - Krankenhaus KW - Simulation KW - Process Optimization KW - Agentbased System KW - Hospital Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24483 ER - TY - THES A1 - Milbrandt, Jens T1 - Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks T1 - Effiziente Konzepte und Leistungsbewertung zum Ressourcen Management in zukünftigen IP Netzen N2 - Next generation networks (NGNs) must integrate the services of current circuit-switched telephone networks and packet-switched data networks. This convergence towards a unified communication infrastructure necessitates from the high capital expenditures (CAPEX) and operational expenditures (OPEX) due to the coexistence of separate networks for voice and data. In the end, NGNs must offer the same services as these legacy networks and, therefore, they must provide a low-cost packet-switched solution with real-time transport capabilities for telephony and multimedia applications. In addition, NGNs must be fault-tolerant to guarantee user satisfaction and to support business-critical processes also in case of network failures. A key technology for the operation of NGNs is the Internet Protocol (IP) which evolved to a common and well accepted standard for networking in the Internet during the last 25 years. There are two basically different approaches to achieve QoS in IP networks. With capacity overprovisioning (CO), an IP network is equipped with sufficient bandwidth such that network congestion becomes very unlikely and QoS is maintained most of the time. The second option to achieve QoS in IP networks is admission control (AC). AC represents a network-inherent intelligence that admits real-time traffic flows to a single link or an entire network only if enough resources are available such that the requirements on packet loss and delay can be met. Otherwise, the request of a new flow is blocked. This work focuses on resource management and control mechanisms for NGNs, in particular on AC and associated bandwidth allocation methods. The first contribution consists of a new link-oriented AC method called experience-based admission control (EBAC) which is a hybrid approach dealing with the problems inherent to conventional AC mechanisms like parameter-based or measurement-based AC (PBAC/MBAC). PBAC provides good QoS but suffers from poor resource utilization and, vice versa, MBAC uses resources efficiently but is susceptible to QoS violations. Hence, EBAC aims at increasing the resource efficiency while maintaining the QoS which increases the revenues of ISPs and postpones their CAPEX for infrastructure upgrades. To show the advantages of EBAC, we first review today’s AC approaches and then develop the concept of EBAC. EBAC is a simple mechanism that safely overbooks the capacity of a single link to increase its resource utilization. We evaluate the performance of EBAC by its simulation under various traffic conditions. The second contribution concerns dynamic resource allocation in transport networks which implement a specific network admission control (NAC) architecture. In general, the performance of different NAC systems may be evaluated by conventional methods such as call blocking analysis which has often been applied in the context of multi-service asynchronous transfer mode (ATM) networks. However, to yield more practical results than abstract blocking probabilities, we propose a new method to compare different AC approaches by their respective bandwidth requirements. To present our new method for comparing different AC systems, we first give an overview of network resource management (NRM) in general. Then we present the concept of adaptive bandwidth allocation (ABA) in capacity tunnels and illustrate the analytical performance evaluation framework to compare different AC systems by their capacity requirements. Different network characteristics influence the performance of ABA. Therefore, the impact of various traffic demand models and tunnel implementations, and the influence of resilience requirements is investigated. In conclusion, the resources in NGNs must be exclusively dedicated to admitted traffic to guarantee QoS. For that purpose, robust and efficient concepts for NRM are required to control the requested bandwidth with regard to the available transmission capacity. Sophisticated AC will be a key function for NRM in NGNs and, therefore, efficient resource management concepts like experience-based admission control and adaptive bandwidth allocation for admission-controlled capacity tunnels, as presented in this work are appealing for NGN solutions. N2 - In meiner Dissertation zum Thema “Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks” werden im Wesentlichen zwei miteinander verwobene Konzepte zur effizienten Nutzung von Übertragungsressourcen in zukünftigen IP Netzen untersucht. Das Management solcher Ressourcen ist zur Unterstützung qualitativ hochwertiger Netzdiensten (z.B. IP Telephonie, IP TV, etc.) in Zukunft unabdingbar. Gegenwärtig werden diese Dienste durch den Einsatz hoher Übertragungskapazitäten (engl. capacity overprovisioning) in den IP Breitbandnetzen ermöglicht. Um in Spitzenlastzeiten die Qualität der Dienste aufrecht zu erhalten, sind die Bandbreiten derart hoch angesetzt, dass unter normalen Umständen die Ressourcen nur sehr schwach ausgelastet sind (im Bereich zwischen 10 und 30 Prozent). Diese Überdimensionierungslösung ist einfach zu realisieren aber auch sehr kostenintensiv, ineffizient und vor allem nicht (zukunfts-)sicher, da bei ständig steigendem Bandbreitenbedarf, die Netzkapazitäten häufig angepasst werden müssen. Eine Effizienzsteigerung bei der Ressourcennutzung in heutigen Kommunikationsnetzen ist daher ein wichtiges Kriterium für die Wirtschaftlichkeit zukünftiger IP Netze. Erreicht werden kann dies mit den Mitteln der Netzzugangskontrolle (engl. admission control, kurz AC), welche bereits in verschiedenen Formen entwickelt, untersucht und teilweise auch in heutigen IP Netzen realisiert ist. Die AC stellt eine vergleichsweise komplexe Lösung zur Aufrechterhaltung der Dienstgüte in IP Netzen dar. Daher sind einfache und effiziente Mechanismen/Automatismen zur Durchführung der AC gefordert, um deren Einsatz an Stelle der Überdimensionierung zu rechtfertigen. Den zuvor genannten Forderungen nach effizienter Ressourcennutzung entsprechend stellt der erste Hauptbeitrag der Dissertation einen neuen Ansatz zur AC dar, die so genannte erfahrungsbasierte Netzzugangskontrolle (engl. experience-based admission control, kurz EBAC). Gegenüber den existierenden alternativen, d.h. parameter- oder mess-basierten Verfahren der AC zeichnet sich die EBAC durch effiziente Ressourcennutzung und begünstigt gleichzeitig die Aufrechterhaltung der Dienstgüte. Die genaue Funktionsweise der EBAC und die simulative Leistungsuntersuchung sind in der Dissertation nachzulesen. Der zweite Themenschwerpunkt der Dissertation greift eine tunnel-basierte Netzarchitektur auf und präsentiert mit deren Hilfe eine neue Methode zur Bewertung verschiedener Bandbreitenallokationsstrategien in Kombination mit AC. Die neue Bewertungsmethode wird zwar anhand einer speziellen tunnel-basierten AC untersucht, lässt sich aber auf alle Arten so genannter budget-basierter AC anwenden. Bei der konventionellen Leistungsbewertung verschiedener AC-Systeme dienen abstrakte Blockierungswahrscheinlichkeiten als Leistungsmaß. Im Gegensatz hierzu, bewertet die neue Methode die Leistung eines AC-Systems anhand des zugehörigen Bandbreitenbedarfs in Abhängigkeit verschiedener Einflussfaktoren, z.B. der avisierten Blockierwahrscheinlichkeit des AC-Systems, der Verkehrszusammensetzung, des Verkehrsvolumens, der Verkehrsdynamik und vor allem der angewandten Bandbreitenallokationsstrategie. In zukünftigen IP Netzen müssen die Ressourcen zur Datenübertragung besser verwaltet und kontrolliert werden. Zugelassener Verkehr mit hohen Dienstgüteanforderungen muss exklusiv Bandbreite zugewiesen werden, um die geforderte Dienstgüte garantieren zu können. Um dieses Ziel zu erreichen werden robuste und effiziente Konzepte zum Management von Netzressourcen benötigt. Intelligenter Netzzugangskontrolle wird eine Schlüsselfunktion in zukünftigen IP Netzen zukommen. Die in dieser Dissertation vorgestellten, effizienten Ressourcenmanagementkonzepte „erfahrungsbasierte Netzzugangskontrolle“ und „adaptive Bandbreitenallokation in zugangskontrollierten Kapazitätstunnel“ tragen zum Erreichen dieses Ziels bei. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/07 KW - Ressourcenmanagement KW - Leistungsbewertung KW - Rechnernetz KW - IP KW - Ressourcen Management KW - Leistungsbewertung KW - zukünftige Kommunikationsnetze KW - Resource Management KW - Performance Analysis KW - Next Generation Networks Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23332 ER - TY - THES A1 - Travers, Stephen T1 - Structural Properties of NP-Hard Sets and Uniform Characterisations of Complexity Classes T1 - Strukturelle Eigenschaften NP-harter Mengen und uniforme Charakterisierungen von Komplexitätsklassen N2 - This thesis is devoted to the study of computational complexity theory, a branch of theoretical computer science. Computational complexity theory investigates the inherent difficulty in designing efficient algorithms for computational problems. By doing so, it analyses the scalability of computational problems and algorithms and places practical limits on what computers can actually accomplish. Computational problems are categorised into complexity classes. Among the most important complexity classes are the class NP and the subclass of NP-complete problems, which comprises many important optimisation problems in the field of operations research. Moreover, with the P-NP-problem, the class NP represents the most important unsolved question in computer science. The first part of this thesis is devoted to the study of NP-complete-, and more generally, NP-hard problems. It aims at improving our understanding of this important complexity class by systematically studying how altering NP-hard sets affects their NP-hardness. This research is related to longstanding open questions concerning the complexity of unions of disjoint NP-complete sets, and the existence of sparse NP-hard sets. The second part of the thesis is also dedicated to complexity classes but takes a different perspective: In a sense, after investigating the interior of complexity classes in the first part, the focus shifts to the description of complexity classes and thereby to the exterior in the second part. It deals with the description of complexity classes through leaf languages, a uniform framework which allows us to characterise a great variety of important complexity classes. The known concepts are complemented by a new leaf-language model. To a certain extent, this new approach combines the advantages of the known models. The presented results give evidence that the connection between the theory of formal languages and computational complexity theory might be closer than formerly known. N2 - Diese Dissertation behandelt die Komplexitätstheorie, ein zentrales Teilgebiet der Theoretischen Informatik. Die Komplexitätstheorie untersucht die inhärente Schwierigkeit, effiziente Algorithmen für Berechnungsprobleme zu entwerfen. Sie analysiert die Skalierbarkeit von Berechnungsproblemen und Algorithmen und stellt grundsätzliche Grenzen für die Leistungsfähigkeit von Computern auf. Berechnungsprobleme werden in Komplexitätsklassen kategorisiert. Dabei spielen die Klasse NP und die in ihr enthaltene Klasse der NP-vollständigen Probleme eine wichtige Rolle. Letztere umfasst zahlreiche in der Praxis bedeutsame Probleme aus dem Bereich Operations Research. Darüber hinaus repräsentiert die Klasse NP mit dem P-NP Problem gleichfalls das wichtigste ungelöste Problem in der Informatik. Der erste Teil dieser Dissertation ist der Untersuchung NP-vollständiger und noch allgemeiner, NP-harter Mengen gewidmet. Durch eine systematische Untersuchung der Frage, wie sich partielle Modifikationen von Mengen auf deren NP-Härte auswirken, soll das Verständnis dieser wichtigen Komplexitätsklasse verbessert werden. Die Untersuchungen in diesem Bereich stehen in enger Verbindung zu wichtigen ungelösten Fragen, wie beispielsweise der Frage nach der Komplexität von Vereinigungen disjunkter NP-vollständiger Mengen und darüber hinaus der Frage nach der Existenz dünner, NP-harter Mengen. Der zweite Teil der Dissertation beschäftigt sich ebenfalls mit der Komplexitätstheorie, nimmt dabei aber eine andere Perspektive ein: Während im ersten Teil mit der Untersuchung struktureller Eigenschaften innere Aspekte von Komplexitätsklassen im Vordergrund stehen dreht es sich im zweiten Teil um die Beschreibung von Komplexitätsklassen. Dabei werden so genannte Blattsprachen verwendet, welche einen uniformen Beschreibungsmechanismus für Komplexitätsklassen darstellen. Die bestehenden Blattsprachen-Konzepte werden durch einen neuen Ansatz ergänzt, der in einem gewissen Sinne die Vorteile der bekannten Ansätze vereint. Die erzielten Ergebnisse sind Evidenz dafür, dass die Verbindung zwischen der Theorie der formalen Sprachen und der Komplexitätstheorie noch enger ist als bislang vermutet. KW - Berechnungskomplexität KW - Komplexität KW - Theoretische Informatik KW - NP-Vollständigkeit KW - Strukturelle Komplexität KW - NP-complete sets KW - structural complexity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-27124 ER - TY - THES A1 - Hopfner, Marbod T1 - Source Code Analysis, Management, and Visualization for PROLOG T1 - Quelltextanalyse, Verwaltung und Visualisierung für Prolog N2 - This thesis deals with the management and analysis of source code, which is represented in XML. Using the elementary methods of the XML repository, the XML source code representation is accessed, changed, updated, and saved. We reason about the source code, refactor source code and we visualize dependency graphs for call analysis. The visualized dependencies between files, modules, or packages are used to structure the source code in order to get a system, which is easily to comprehend, to modify and to complete. Sophisticated methods have been developed to slice the source code in order to obtain a working package of a large system, containing only a specific functionality. The basic methods, on which the visualizations and analyses are built on can be changed like changing a plug-in. The visualization methods can be reused in order to handle arbitrary source code representations, e.g., JAML, PHPML, PROLOGML. Dependencies of other context can be visualized, too, e.g., ER diagrams, or website references. The tool SCAV supports source code visualization and analyzing methods. N2 - Diese Dissertation beschäftigt sich mit der Verwaltung und Analyse von Quellcode, der in XML repräsentiert ist. Es werden Abhängigkeitsgraphen visualisiert um ein Projekt leichter verstehen zu können. Es kann auch ein Slice einer bestimmten Methode aus dem Projekt erstellt werden. Die Programmierung ist in Modulen gemacht, so dass die Funktionalität leicht erweitert werden kann. KW - Refactoring KW - Software Engineering KW - Refactoring KW - Call Graph KW - Dependency Graph KW - Abhängigskeitsgraph KW - Software Engineering KW - Source Code Visualization KW - Refactoring KW - Call Graph KW - Dependency Graph KW - Abhängigskeitsgraph KW - Software Engineering KW - Source Code Visualization Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36300 ER - TY - THES A1 - Feineis, Markus T1 - Wortgenaue Annotation digitalisierter mittelalterlicher Handschriften T1 - One-to-one Annotation of Digitised Medieval Manuscripts N2 - No abstract available KW - Annotation KW - Handschrift KW - Digitalisierung Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-30448 ER - TY - THES A1 - Mäder, Andreas T1 - Performance Models for UMTS 3.5G Mobile Wireless Systems T1 - Leistungsmodelle für UMTS 3.5G Mobilfunksysteme N2 - Mobile telecommunication systems of the 3.5th generation (3.5G) constitute a first step towards the requirements of an all-IP world. As the denotation suggests, 3.5G systems are not completely new designed from scratch. Instead, they are evolved from existing 3G systems like UMTS or cdma2000. 3.5G systems are primarily designed and optimized for packet-switched best-effort traffic, but they are also intended to increase system capacity by exploiting available radio resources more efficiently. Systems based on cdma2000 are enhanced with 1xEV-DO (EV-DO: evolution, data-optimized). In the UMTS domain, the 3G partnership project (3GPP) specified the High Speed Packet Access (HSPA) family, consisting of High Speed Downlink Packet Access (HSDPA) and its counterpart High Speed Uplink Packet Access (HSUPA) or Enhanced Uplink. The focus of this monograph is on HSPA systems, although the operation principles of other 3.5G systems are similar. One of the main contributions of our work are performance models which allow a holistic view on the system. The models consider user traffic on flow-level, such that only on significant changes of the system state a recalculation of parameters like bandwidth is necessary. The impact of lower layers is captured by stochastic models. This approach combines accurate modeling and the ability to cope with computational complexity. Adopting this approach to HSDPA, we develop a new physical layer abstraction model that takes radio resources, scheduling discipline, radio propagation and mobile device capabilities into account. Together with models for the calculation of network-wide interference and transmit powers, a discrete-event simulation and an analytical model based on a queuing-theoretical approach are proposed. For the Enhanced Uplink, we develop analytical models considering independent and correlated other-cell interference. N2 - Die vorliegende Arbeit beschäftigt sich mit Mobilfunksystemen der Generation 3.5 im Allgemeinen, und mit den UMTS-spezifischen Ausprägungen HSDPA (High Speed Downlink Packet Access) und HSUPA (High Speed Uplink Packet Access) bzw. Enhanced Uplink im speziellen. Es werden integrierte Systeme betrachtet, d.h. 3.5G Datenkanäle koexistieren mit "klassischen" UMTS Datenkanälen wie in den Spezifikationen von UMTS Release ´99 beschrieben. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/08 KW - Mobilfunk KW - Leistungsbewertung KW - UMTS KW - HSPA KW - Funkressourcenverwaltung KW - Modellierungstechniken KW - Netzwerkplanung KW - UMTS KW - HSPA KW - radio resource management KW - modeling techniques KW - network planning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32525 ER - TY - THES A1 - Tischler, German T1 - Theory and Applications of Parametric Weighted Finite Automata T1 - Theorie und Anwendungen parametrisch gewichteter endlicher Automaten N2 - Parametric weighted finite automata (PWFA) are a multi-dimensional generalization of weighted finite automata. The expressiveness of PWFA contains the expressiveness of weighted finite automata as well as the expressiveness of affine iterated function system. The thesis discusses theory and applications of PWFA. The properties of PWFA definable sets are studied and it is shown that some fractal generator systems can be simulated using PWFA and that various real and complex functions can be represented by PWFA. Furthermore, the decoding of PWFA and the interpretation of PWFA definable sets is discussed. N2 - Parametrisch gewichtete endliche Automaten (PWFA) sind eine multidimensionale Verallgemeinerung gewichteter endlicher Automaten, die sowohl die funktionale Mächtigkeit gewichteter endlicher Automaten als auch die affiner iterierter Funktionensystem umschließt. Die Arbeit diskutiert die Theorie und Anwendungen von PWFA. Es werden Eigenschaften der von PWFA definierbaren Mengen untersucht, gezeigt dass verschiedene fraktale Generatorsysteme mit PWFA simuliert werden können und dass viele praxisrelevante reelle und komplexe Funktionen und Relationen mit PWFA darstellbar sind. Ferner wird die Dekodierung von PWFA und die Interpretation PWFA-darstellbarer Mengen diskutiert. KW - Automat KW - Automata Theory Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28145 ER - TY - THES A1 - Martin, Rüdiger T1 - Resilience, Provisioning, and Control for the Network of the Future T1 - Ausfallsicherheit, Dimensionierungsansätze und Kontrollmechanismen für das Netz der Zukunft N2 - The Internet sees an ongoing transformation process from a single best-effort service network into a multi-service network. In addition to traditional applications like e-mail,WWW-traffic, or file transfer, future generation networks (FGNs) will carry services with real-time constraints and stringent availability and reliability requirements like Voice over IP (VoIP), video conferencing, virtual private networks (VPNs) for finance, other real-time business applications, tele-medicine, or tele-robotics. Hence, quality of service (QoS) guarantees and resilience to failures are crucial characteristics of an FGN architecture. At the same time, network operations must be efficient. This necessitates sophisticated mechanisms for the provisioning and the control of future communication infrastructures. In this work we investigate such echanisms for resilient FGNs. There are many aspects of the provisioning and control of resilient FGNs such as traffic matrix estimation, traffic characterization, traffic forecasting, mechanisms for QoS enforcement also during failure cases, resilient routing, or calability concerns for future routing and addressing mechanisms. In this work we focus on three important aspects for which performance analysis can deliver substantial insights: load balancing for multipath Internet routing, fast resilience concepts, and advanced dimensioning techniques for resilient networks. Routing in modern communication networks is often based on multipath structures, e.g., equal-cost multipath routing (ECMP) in IP networks, to facilitate traffic engineering and resiliency. When multipath routing is applied, load balancing algorithms distribute the traffic over available paths towards the destination according to pre-configured distribution values. State-of-the-art load balancing algorithms operate either on the packet or the flow level. Packet level mechanisms achieve highly accurate traffic distributions, but are known to have negative effects on the performance of transport protocols and should not be applied. Flow level mechanisms avoid performance degradations, but at the expense of reduced accuracy. These inaccuracies may have unpredictable effects on link capacity requirements and complicate resource management. Thus, it is important to exactly understand the accuracy and dynamics of load balancing algorithms in order to be able to exercise better network control. Knowing about their weaknesses, it is also important to look for alternatives and to assess their applicability in different networking scenarios. This is the first aspect of this work. Component failures are inevitable during the operation of communication networks and lead to routing disruptions if no special precautions are taken. In case of a failure, the robust shortest-path routing of the Internet reconverges after some time to a state where all nodes are again reachable – provided physical connectivity still exists. But stringent availability and reliability criteria of new services make a fast reaction to failures obligatory for resilient FGNs. This led to the development of fast reroute (FRR) concepts for MPLS and IP routing. The operations of MPLS-FRR have already been standardized. Still, the standards leave some degrees of freedom for the resilient path layout and it is important to understand the tradeoffs between different options for the path layout to efficiently provision resilient FGNs. In contrast, the standardization for IP-FRR is an ongoing process. The applicability and possible combinations of different concepts still are open issues. IP-FRR also facilitates a comprehensive resilience framework for IP routing covering all steps of the failure recovery cycle. These points constitute another aspect of this work. Finally, communication networks are usually over-provisioned, i.e., they have much more capacity installed than actually required during normal operation. This is a precaution for various challenges such as network element failures. An alternative to this capacity overprovisioning (CO) approach is admission control (AC). AC blocks new flows in case of imminent overload due to unanticipated events to protect the QoS for already admitted flows. On the one hand, CO is generally viewed as a simple mechanism, AC as a more complex mechanism that complicates the network control plane and raises interoperability issues. On the other hand, AC appears more cost-efficient than CO. To obtain advanced provisioning methods for resilient FGNs, it is important to find suitable models for irregular events, such as failures and different sources of overload, and to incorporate them into capacity dimensioning methods. This allows for a fair comparison between CO and AC in various situations and yields a better understanding of the strengths and weaknesses of both concepts. Such an advanced capacity dimensioning method for resilient FGNs represents the third aspect of this work. N2 - Das Internet befindet sich gegenwärtig in einem Transformationsprozess von einem Netz mit einer einzigen best-effort Dienstklasse hin zu einem Mehr-Dienste-Netz. Zusätzlich zu herkömmlichen Anwendungen wie E-Mail, WWW oder Datenübertragung werden zukünftige Netze Dienste mit Echtzeitbedürfnissen und strikten Anforderungen an Verfügbarkeit und Zuverlässigkeit wie Voice over IP (VoIP), Videokonferenzdienste, Virtual Private Networks (VPNs) für Finanzanwendungen und andere Geschäftsanwendungen mit Echtzeitanforderungen, Tele-Medizin oder Telerobotik tragen. Daher sind die Gewährleistung von Dienstgüte und Ausfallsicherheit wesentliche Merkmale zukünftiger Netzarchitekturen. Gleichzeitig muss der Netzbetrieb effizient sein. Dies zieht den Bedarf an ausgefeilten Mechanismen für die Dimensionierung und Kontrolle ausfallsicherer Kommunikationsstrukturen nach sich. In dieser Arbeit werden solche Mechanismen, nämlich Lastaufteilung, Konzepte zur schnellen Reaktion im Fehlerfall und intelligente Ansätze zur Netzdimensionierung, untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/08 KW - Backbone-Netz KW - load balancing KW - resilience KW - fast reroute KW - admission control KW - overprovisioning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28497 ER - TY - THES A1 - Driewer, Frauke T1 - Teleoperation Interfaces in Human-Robot Teams T1 - Benutzerschnittstellen für Teleoperation in Mensch-Roboter Teams N2 - Diese Arbeit beschäftigt sich mit der Verbesserung von Mensch-Roboter Interaktion in Mensch-Roboter Teams für Teleoperation Szenarien, wie z.B. robotergestützte Feuerwehreinsätze. Hierbei wird ein Konzept und eine Architektur für ein System zur Unterstützung von Teleoperation von Mensch-Roboter Teams vorgestellt. Die Anforderungen an Informationsaustausch und -verarbeitung, insbesondere für die Anwendung Rettungseinsatz, werden ausgearbeitet. Weiterhin wird das Design der Benutzerschnittstellen für Mensch-Roboter Teams dargestellt und Prinzipien für Teleoperation-Systeme und Benutzerschnittstellen erarbeitet. Alle Studien und Ansätze werden in einem Prototypen-System implementiert und in verschiedenen Benutzertests abgesichert. Erweiterungsmöglichkeiten zum Einbinden von 3D Sensordaten und die Darstellung auf Stereovisualisierungssystemen werden gezeigt. N2 - This work deals with teams in teleoperation scenarios, where one human team partner (supervisor) guides and controls multiple remote entities (either robotic or human) and coordinates their tasks. Such a team needs an appropriate infrastructure for sharing information and commands. The robots need to have a level of autonomy, which matches the assigned task. The humans in the team have to be provided with autonomous support, e.g. for information integration. Design and capabilities of the human-robot interfaces will strongly influence the performance of the team as well as the subjective feeling of the human team partners. Here, it is important to elaborate the information demand as well as how information is presented. Such human-robot systems need to allow the supervisor to gain an understanding of what is going on in the remote environment (situation awareness) by providing the necessary information. This includes achieving fast assessment of the robot´s or remote human´s state. Processing, integration and organization of data as well as suitable autonomous functions support decision making and task allocation and help to decrease the workload in this multi-entity teleoperation task. Interaction between humans and robots is improved by a common world model and a responsive system and robots. The remote human profits from a simplified user interface providing exactly the information needed for the actual task at hand. The topic of this thesis is the investigation of such teleoperation interfaces in human-robot teams, especially for high-risk, time-critical, and dangerous tasks. The aim is to provide a suitable human-robot team structure as well as analyze the demands on the user interfaces. On one side, it will be looked on the theoretical background (model, interactions, and information demand). On the other side, real implementations for system, robots, and user interfaces are presented and evaluated as testbeds for the claimed requirements. Rescue operations, more precisely fire-fighting, was chosen as an exemplary application scenario for this work. The challenges in such scenarios are high (highly dynamic environments, high risk, time criticality etc.) and it can be expected that results can be transferred to other applications, which have less strict requirements. The present work contributes to the introduction of human-robot teams in task-oriented scenarios, such as working in high risk domains, e.g. fire-fighting. It covers the theoretical background of the required system, the analysis of related human factors concepts, as well as discussions on implementation. An emphasis is placed on user interfaces, their design, requirements and user testing, as well as on the used techniques (three-dimensional sensor data representation, mixed reality, and user interface design guidelines). Further, the potential integration of 3D sensor data as well as the visualization on stereo visualization systems is introduced. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 1 KW - Robotik KW - Mobiler Roboter KW - Autonomer Roboter KW - Mensch-Maschine-System KW - Mensch-Maschine-Schnittstelle KW - Mixed Reality KW - Mensch-Roboter-Interaktion KW - Situationsbewusstsein KW - Teleoperation KW - Benutzerschnittstelle KW - Rettungsroboter KW - Human-Robot-Interaction KW - Situation Awareness KW - Teleoperation KW - User Interface KW - Search-and-Rescue Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36351 SN - 978-3-923959-57-0 N1 - Zugl. gedruckte Ausgabe: ISBN: 978-3-923959-54-9 (Paper) ER - TY - THES A1 - Spoerhase, Joachim T1 - Competitive and Voting Location T1 - Kompetitive und präferenzbasierte Standortprobleme N2 - We consider competitive location problems where two competing providers place their facilities sequentially and users can decide between the competitors. We assume that both competitors act non-cooperatively and aim at maximizing their own benefits. We investigate the complexity and approximability of such problems on graphs, in particular on simple graph classes such as trees and paths. We also develop fast algorithms for single competitive location problems where each provider places a single facilty. Voting location, in contrast, aims at identifying locations that meet social criteria. The provider wants to satisfy the users (customers) of the facility to be opened. In general, there is no location that is favored by all users. Therefore, a satisfactory compromise has to be found. To this end, criteria arising from voting theory are considered. The solution of the location problem is understood as the winner of a virtual election among the users of the facilities, in which the potential locations play the role of the candidates and the users represent the voters. Competitive and voting location problems turn out to be closely related. N2 - Wir betrachten kompetitive Standortprobleme, bei denen zwei konkurrierende Anbieter ihre Versorger sequenziell platzieren und die Kunden sich zwischen den Konkurrenten entscheiden können. Wir nehmen an, dass beide Konkurrenten nicht-kooperativ agieren und auf die Maximierung ihres eigenen Vorteils abzielen. Wir untersuchen die Komplexität und Approximierbarkeit solcher Probleme auf Graphen, insbesondere auf einfachen Graphklassen wie Bäumen und Pfaden. Ferner entwickeln wir schnelle Algorithmen für kompetitive Einzelstandortprobleme, bei denen jeder Anbieter genau einen Versorger errichtet. Im Gegensatz dazu geht es bei Voting-Standortproblemen um die Bestimmung eines Standorts, der die Benutzer oder Kunden soweit wie möglich zufrieden stellt. Solche Fragestellungen sind beispielsweise bei der Planung öffentlicher Einrichtungen relevant. In den meisten Fällen gibt es keinen Standort, der von allen Benutzern favorisiert wird. Daher muss ein Kompromiss gefunden werden. Hierzu werden Kriterien betrachtet, die auch in Wahlsystemen eingesetzt werden: Ein geeigneter Standort wird als Sieger einer gedachten Wahl verstanden, bei der die möglichen Standorte die zur Wahl stehenden Kandidaten und die Kunden die Wähler darstellen. Kompetitive Standortprobleme und Voting-Standortprobleme erweisen sich als eng miteinander verwandt. KW - Standortproblem KW - NP-hartes Problem KW - Approximationsalgorithmus KW - Graph KW - Effizienter Algorithmus KW - competitive location KW - voting location KW - NP-hardness KW - approximation algorithm KW - efficient algorithm KW - graph KW - tree KW - graph decomposition Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52978 ER - TY - THES A1 - Saska, Martin T1 - Trajectory planning and optimal control for formations of autonomous robots T1 - Die Bahnplanung und die optimale Steuerung für Formationen der autonomen Roboter N2 - In this thesis, we present novel approaches for formation driving of nonholonomic robots and optimal trajectory planning to reach a target region. The methods consider a static known map of the environment as well as unknown and dynamic obstacles detected by sensors of the formation. The algorithms are based on leader following techniques, where the formation of car-like robots is maintained in a shape determined by curvilinear coordinates. Beyond this, the general methods of formation driving are specialized and extended for an application of airport snow shoveling. Detailed descriptions of the algorithms complemented by relevant stability and convergence studies will be provided in the following chapters. Furthermore, discussions of the applicability will be verified by various simulations in existing robotic environments and also by a hardware experiment. N2 - In dieser Arbeit präsentieren wir neuartige Algorithmen für die Steuerung der Formationen der nichtholonomen Roboter und ihre optimale Bahnplanung. Die Algorithmen beruhen auf "leader-follower" Techniken. Die Formationen der "car-like" Roboter sind in einer bestimmten Form von "curvilinear" Koordinaten gehalten. Die Steuerungmethoden der Formationen sind spezialisiert und erweitert um ihre Anwendung auf das Flughafenschneeschaufeln. In dieser Arbeit werden die detaillierten Beschreibungen der Algorithmen durch entsprechende Stabilität- und Konvergenz-Studien gestellt. Ihre Anwendbarkeit wird durch verschiedene Simulationen und eine Hardware-Experiment überprüft. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 3 KW - Autonomer Roboter KW - Mobiler Roboter KW - Optimale Kontrolle KW - Formation KW - Steuerung KW - formation driving KW - mobile robots KW - snow shoveling KW - receding horizon control KW - model predictive control KW - trajectory planning Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53175 SN - 978-3-923959-56-3 ER - TY - THES A1 - Hoßfeld, Tobias T1 - Performance Evaluation of Future Internet Applications and Emerging User Behavior T1 - Leistungsbewertung von zukünftigen Internet-Applikationen und auftretenden Nutzerverhaltens N2 - In future telecommunication systems, we observe an increasing diversity of access networks. The separation of transport services and applications or services leads to multi-network services, i.e., a future service has to work transparently to the underlying network infrastructure. Multi-network services with edge-based intelligence, like P2P file sharing or the Skype VoIP service, impose new traffic control paradigms on the future Internet. Such services adapt the amount of consumed bandwidth to reach different goals. A selfish behavior tries to keep the QoE of a single user above a certain level. Skype, for instance, repeats voice samples depending on the perceived end-to-end loss. From the viewpoint of a single user, the replication of voice data overcomes the degradation caused by packet loss and enables to maintain a certain QoE. The cost for this achievement is a higher amount of consumed bandwidth. However, if the packet loss is caused by congestion in the network, this additionally required bandwidth even worsens the network situation. Altruistic behavior, on the other side, would reduce the bandwidth consumption in such a way that the pressure on the network is released and thus the overall network performance is improved. In this monograph, we analyzed the impact of the overlay, P2P, and QoE paradigms in future Internet applications and the interactions from the observing user behavior. The shift of intelligence toward the edge is accompanied by a change in the emerging user behavior and traffic profile, as well as a change from multi-service networks to multi-networks services. In addition, edge-based intelligence may lead to a higher dynamics in the network topology, since the applications are often controlled by an overlay network, which can rapidly change in size and structure as new nodes can leave or join the overlay network in an entirely distributed manner. As a result, we found that the performance evaluation of such services provides new challenges, since novel key performance factors have to be first identified, like pollution of P2P systems, and appropriate models of the emerging user behavior are required, e.g. taking into account user impatience. As common denominator of the presented studies in this work, we focus on a user-centric view when evaluating the performance of future Internet applications. For a subscriber of a certain application or service, the perceived quality expressed as QoE will be the major criterion of the user's satisfaction with the network and service providers. We selected three different case studies and characterized the application's performance from the end user's point of view. Those are (1) cooperation in mobile P2P file sharing networks, (2) modeling of online TV recording services, and (3) QoE of edge-based VoIP applications. The user-centric approach facilitates the development of new mechanisms to overcome problems arising from the changing user behavior. An example is the proposed CycPriM cooperation strategy, which copes with selfish user behavior in mobile P2P file sharing system. An adequate mechanism has also been shown to be efficient in a heterogeneous B3G network with mobile users conducting vertical handovers between different wireless access technologies. The consideration of the user behavior and the user perceived quality guides to an appropriate modeling of future Internet applications. In the case of the online TV recording service, this enables the comparison between different technical realizations of the system, e.g. using server clusters or P2P technology, to properly dimension the installed network elements and to assess the costs for service providers. Technologies like P2P help to overcome phenomena like flash crowds and improve scalability compared to server clusters, which may get overloaded in such situations. Nevertheless, P2P technology invokes additional challenges and different user behavior to that seen in traditional client/server systems. Beside the willingness to share files and the churn of users, peers may be malicious and offer fake contents to disturb the data dissemination. Finally, the understanding and the quantification of QoE with respect to QoS degradations permits designing sophisticated edge-based applications. To this end, we identified and formulated the IQX hypothesis as an exponential interdependency between QoE and QoS parameters, which we validated for different examples. The appropriate modeling of the emerging user behavior taking into account the user's perceived quality and its interactions with the overlay and P2P paradigm will finally help to design future Internet applications. N2 - Applikationen im heutigen Internet werden immer mehr durch intelligente Endknoten bereitgestellt, deren Kommunikation in logischen, virtuellen Netzwerken, (Overlays) realisiert wird. Die verstärkte Diensterbringung durch solche Overlays, wie zum Beispiel bei Peer-to-Peer Dateitauschbörsen oder Telefonie über das Internet, wird durch einen Paradigmenwechsel von Multi-Service Networks zu Multi-Network Services beschrieben. Während in einem Multi-Service Network verschiedene Dienste innerhalb eines Netzes angeboten werden, beschreibt ein Multi-Network Service die Diensterbringung über verschiedene Netze und Netzzugangstechnologien, wie es im Internet der Fall ist. Dadurch kann die technische Güte des Telekommunikationsdienstes (Quality of Service, QoS) nicht mehr die alleinige Metrik für die Qualität eines Dienstes sein. Stattdessen ist die vom Nutzer erfahrene Dienstgüte (User Perceived Quality of Experience, QoE) zu betrachten. Diese QoE muss entsprechend modelliert werden, um die Performanz von heutigen oder auch zukünftigen Internetapplikationen zu beurteilen. Die Berücksichtigung der QoE beinhaltet unter anderem auch neuartige Verhaltensweisen der Teilnehmer, die ebenfalls modelliert werden müssen. Ein Beispiel ist der Dienstabbruch durch ungeduldige Nutzer beim Herunterladen von Filmen oder bei nicht ausreichender Qualität bei Internet-Telefonie. Durch die Verschiebung der Intelligenz von Applikationen in Richtung Endknoten entstehen neu aufkommende Verhaltensweisen der Teilnehmer und sich ändernde Charakteristika des Netzwerkverkehrs, die sie von klassischen Client-Server-Anwendungen unterscheiden. Beispiele hierfür sind egoistisches oder altruistisches Nutzerverhalten bei der Einbringung von Endnutzer-Ressourcen zur Diensterbringung oder auch bösartiges Nutzerverhalten bei der gezielten Störung eines Dienstes (Pollution). In beiden Fällen sind die zeitdynamischen Verhaltensmuster (Churn, Flash Crowds) zu berücksichtigen. Um die ausgedehnten Overlay. Netze zu planen und zu evaluieren, sind überdies auch neue Leistungsbewertungsmodelle notwendig, damit zum Beispiel die Simulation skaliert oder aber auch zeitdynamische Nutzerverhalten in analytischen Modellen abgebildet wird. Diese Doktorarbeit arbeitet diese Aspekte an drei Anwendungsbeispielen auf: Verteilernetz für Dateiinhalte (Content Distribution Network), Netzwerk-basierte Videorekorder (Online TV Recorder) und Sprachtelefonie über P2P (VoP2P). Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Anwendungsbeispiele. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/09 KW - Leistungsbewertung KW - Peer-to-Peer-Netz KW - Dienstgüte KW - Overlay-Netz KW - Mathematische Modellierung KW - BitTorrent KW - Skype KW - Warteschlangentheorie KW - zukünftiges Internet KW - vom Nutzer erfahrene Dienstgüte QoE KW - Multi-Netzwerk Dienste KW - intelligente Applikationen KW - Verteilung von Inhalten KW - Future Internet KW - Quality of Experience QoE KW - Multi-Network Service KW - Edge-based Intelligence KW - Content Distribution Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-37570 ER - TY - THES A1 - Hess, Martin T1 - Motion coordination and control in systems of nonholonomic autonomous vehicles T1 - Bewegungskoordination und Regelung in Gruppen nichtholonomer autonomer Fahrzeuge N2 - This work focuses on coordination methods and the control of motion in groups of nonholonomic wheeled mobile robots, in particular of the car-like type. These kind of vehicles are particularly restricted in their mobility. In the main part of this work the two problems of formation motion coordination and of rendezvous in distributed multi-vehicle systems are considered. We introduce several enhancements to an existing motion planning approach for formations of nonholonomic mobile robots. Compared to the original method, the extended approach is able to handle time-varying reference speeds as well as adjustments of the formation's shape during reference trajectory segments with continuously differentiable curvature. Additionally, undesired discontinuities in the speed and steering profiles of the vehicles are avoided. Further, the scenario of snow shoveling on an airfield by utilizing multiple formations of autonomous snowplows is discussed. We propose solutions to the subproblems of motion planning for the formations and tracking control for the individual vehicles. While all situations that might occur have been tested in a simulation environment, we also verified the developed tracking controller in real robot hardware experiments. The task of the rendezvous problem in groups of car-like robots is to drive all vehicles to a common position by means of decentralized control laws. Typically there exists no direct interaction link between all of the vehicles. In this work we present decentralized rendezvous control laws for vehicles with free and with bounded steering. The convergence properties of the approaches are analyzed by utilizing Lyapunov based techniques. Furthermore, they are evaluated within various simulation experiments, while the bounded steering case is also verified within laboratory hardware experiments. Finally we introduce a modification to the bounded steering system that increases the convergence speed at the expense of a higher traveled distance of the vehicles. N2 - Diese Arbeit befasst sich mit Methoden zur Bewegungskoordination und Regelung in Gruppen autonomer, nichtholomer Fahrzeuge, wobei vornehmlich autoähnliche mobile Roboter betrachtet werden. Diese Fahrzeuge sind besonders eingeschränkt in ihrer Bewegungsfreiheit. Im Hauptteil der Arbeit werden die Probleme der Formationsbewegung und des Rendezvous in Gruppen verteilter Fahrzeuge betrachtet. Für ein bestehendes Verfahren zur Bewegungsplanung für Formationen nichtholonomer, mobiler Fahrzeuge werden eine Reihe von Verbesserungen vorgestellt. Diese ermöglichen dem erweiterten Verfahren den Umgang mit Referenztrajektorien mit nicht-konstanter Geschwindigkeit und stetig differenzierbarer Krümmung. Außerdem werden im Gegensatz zum ursprünglichen Ansatz unerwünschte Sprungstellen in den Geschwindigkeits- und Krümmungsprofilen der Fahrzeuge vermieden. Desweiteren wird in dieser Arbeit das Schneeräumen auf Flughafenrollfeldern mittels Formationen autonomer Schneepflugfahrzeuge diskutiert. Dabei werden Lösungen für die Teilprobleme Bewegungsplanung der Formationen und Spurführungsregelung der einzelnen Fahrzeuge vorgestellt. Zusätzlich zu den durchgeführten Simulationen werden außerdem die Ergebnisse von Hardwareexperimenten mit der entwickelten Spurführungsregelung präsentiert. Das Rendezvous-Problem in Gruppen autoähnlicher Roboter besteht darin, die Fahrzeuge durch dezentrale Regelgesetze zu einer gemeinsamen Position in der Ebene zu bewegen. Dabei besteht typischerweise keine direkte Interaktionsverbindung zwischen allen Fahrzeugen der Gruppe. In dieser Arbeit werden verteilte Rendezvous-Regelgesetze für Fahrzeuge mit unbeschränktem und mit beschränktem Lenkwinkel eingeführt und deren Konvergenzeigenschaften mit Methoden zur Stabilitätsanalyse nicht-linearer Systeme untersucht. Die vorgestellten Regelsysteme werden weiterhin anhand von Simulationen und Hardwareexperimenten verifiziert. Schließlich wird noch eine Erweiterung des Systems für Fahrzeuge mit beschränktem Lenkwinkel vorgestellt, welches die Konvergenzgeschwindigkeit auf Kosten der zurückgelegten Distanz der Fahrzeuge erhöht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 2 KW - Robotik KW - Autonomer Roboter KW - Mobiler Roboter KW - Bewegungskoordination KW - Dezentrale Regelung KW - Nichtlineare Regelung KW - Rendezvous KW - Kooperierende mobile Roboter KW - Formationsbewegung KW - Nichtholonome Fahrzeuge KW - Mehrfahrzeugsysteme KW - Unstetige Regelung KW - Autonomous multi-vehicle systems KW - multi-vehicle formations KW - multi-vehicle rendezvous KW - car-like robots KW - nonholonomic vehicles Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46442 SN - 978-3-923959-55-6 ER - TY - THES A1 - Kaempgen, Benedikt T1 - Deskriptives Data-Mining für Entscheidungsträger: Eine Mehrfachfallstudie T1 - Descriptive data mining for decision-makers: a multiple case study N2 - Das Potenzial der Wissensentdeckung in Daten wird häufig nicht ausgenutzt, was hauptsächlich auf Barrieren zwischen dem Entwicklerteam und dem Endnutzer des Data-Mining zurückzuführen ist. In dieser Arbeit wird ein transparenter Ansatz zum Beschreiben und Erklären von Daten für Entscheidungsträger vorgestellt. In Entscheidungsträger-zentrierten Aufgaben werden die Projektanforderungen definiert und die Ergebnisse zu einer Geschichte zusammengestellt. Eine Anforderung besteht dabei aus einem tabellarischen Bericht und ggf. Mustern in seinem Inhalt, jeweils verständlich für einen Entscheidungsträger. Die technischen Aufgaben bestehen aus einer Datenprüfung, der Integration der Daten in einem Data-Warehouse sowie dem Generieren von Berichten und dem Entdecken von Mustern wie in den Anforderungen beschrieben. Mehrere Data-Mining-Projekte können durch Wissensmanagement sowie eine geeignete Infrastruktur voneinander profitieren. Der Ansatz wurde in zwei Projekten unter Verwendung von ausschließlich Open-Source-Software angewendet. N2 - Despite high potential of data mining in business and science many projects fail due to barriers between the developer team and the end user. In this work a more transparent approach to describing and explaining data to a decision-maker is presented. In decision-maker-centric tasks project requirements are defined and finally the results composed to a story. A requirement is made of a tabular report and possibly patterns in its data, each understandable to a decision-maker. The technical tasks consist of a data assay, the integration of data within a data warehouse and, as required, the creation of reports and the discovery of patterns. Multiple data mining projects benefit from each other through knowledge management and a common infrastructure. The approach has been applied to two projects exclusively using open source systems. KW - Data Mining KW - Entscheidungsträger KW - Fallstudie KW - Methodologie KW - Endnutzer KW - Business Intelligence KW - Open Source KW - data mining KW - case study KW - process model KW - end user KW - open source Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46343 ER - TY - JOUR A1 - Zeeshan, Ahmed T1 - Towards Performance Measurement and Metrics Based Analysis of PLA Applications N2 - This article is about a measurement analysis based approach to help software practitioners in managing the additional level complexities and variabilities in software product line applications. The architecture of the proposed approach i.e. ZAC is designed and implemented to perform preprocessesed source code analysis, calculate traditional and product line metrics and visualize results in two and three dimensional diagrams. Experiments using real time data sets are performed which concluded with the results that the ZAC can be very helpful for the software practitioners in understanding the overall structure and complexity of product line applications. Moreover the obtained results prove strong positive correlation between calculated traditional and product line measures. KW - Programmierbare logische Anordnung KW - Analysis KW - Measurement KW - Software product lines KW - Variability Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-68188 ER - TY - THES A1 - Oechsner, Simon T1 - Performance Challenges and Optimization Potential of Peer-to-Peer Overlay Technologies T1 - Leistungsanforderungen und Optimierungspotential von Peer-to-Peer Overlay-Technologien N2 - In today's Internet, building overlay structures to provide a service is becoming more and more common. This approach allows for the utilization of client resources, thus being more scalable than a client-server model in this respect. However, in these architectures the quality of the provided service depends on the clients and is therefore more complex to manage. Resource utilization, both at the clients themselves and in the underlying network, determine the efficiency of the overlay application. Here, a trade-off exists between the resource providers and the end users that can be tuned via overlay mechanisms. Thus, resource management and traffic management is always quality-of-service management as well. In this monograph, the three currently significant and most widely used overlay types in the Internet are considered. These overlays are implemented in popular applications which only recently have gained importance. Thus, these overlay networks still face real-world technical challenges which are of high practical relevance. We identify the specific issues for each of the considered overlays, and show how their optimization affects the trade-offs between resource efficiency and service quality. Thus, we supply new insights and system knowledge that is not provided by previous work. N2 - Im heutigen Internet werden immer häufiger Overlay-Strukturen aufgebaut, um eine Dienstleistung zu erbringen. Dieser Ansatz ermöglicht die Nutzung von Client-Ressourcen, so dass er in dieser Hinsicht besser skaliert als das Client-Server-Modell. Die Qualität des zur Verfügung gestellten Dienstes hängt nun aber von den Clients ab und ist daher komplizierter zu steuern. Die Ressourcennutzung, sowohl auf den Clients selbst als auch in dem zugrunde liegenden Netzwerk, bestimmt die Effizienz der Overlay-Anwendung. Hier existiert ein Trade-off zwischen Ressourcen-Anbietern und Endkunden, der über Overlay-Mechanismen geregelt werden kann. Daher ist Ressourcenmanagement und Traffic-Management gleichzeitig immer auch Quality-of-Service-Management. In dieser Arbeit werden die drei derzeit am weitesten im Internet verbreiteten und signifikanten Overlay-Typen berücksichtigt. Diese Overlays sind in populären Anwendungen, die erst vor kurzem an Bedeutung gewonnen haben, implementiert. Daher sind diese Overlay-Netze nach wie vor realen technischen Herausforderungen ausgesetzt, die von hoher praktischer Relevanz sind. Die spezifischen Herausforderungen für jedes der betrachteten Overlays werden identifiziert und es wird gezeigt, wie deren Optimierung den Trade-off zwischen Ressourceneffizienz und Service-Qualität beeinflusst. So werden neue Einsichten und Erkenntnisse über diese Systeme gewonnen, die in früheren Arbeiten nicht existieren. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/10 KW - Overlay-Netz KW - Peer-to-Peer-Netz KW - Leistungsbewertung KW - Overlays KW - Peer-to-Peer KW - Performance Evaluation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50015 ER - TY - THES A1 - Henjes, Robert T1 - Performance Evaluation of Publish/Subscribe Middleware Architectures T1 - Leistungsuntersuchung von Publish/Subscribe Middleware Architekturen N2 - While developing modern applications, it is necessary to ensure an efficient and performant communication between different applications. In current environments, a middleware software is used, which supports the publish/subscribe communication pattern. Using this communication pattern, a publisher sends information encapsulated in messages to the middleware. A subscriber registers its interests at the middleware. The monograph describes three different steps to determine the performance of such a system. In a first step, the message throughput performance of a publish/subscribe in different scenarios is measured using a Java Message Service (JMS) based implementation. In the second step the maximum achievable message throughput is described by adapted models depending on the filter complexity and the replication grade. Using the model, the performance characteristics of a specific system in a given scenario can be determined. These numbers are used for the queuing model described in the third part of the thesis, which supports the dimensioning of a system in realistic scenarios. Additionally, we introduce a method to approximate an M/G/1 system numerically in an efficient way, which can be used for real time analysis to predict the expected performance in a certain scenario. Finally, the analytical model is used to investigate different possibilities to ensure the scalability of the maximum achievable message throughput of the overall system. N2 - Bei der Entwicklung moderner Applikationen ist es notwendig eine effiziente und performante Kommunikation zwischen den einzelnen Anwendungen sicherzustellen. In der Praxis kommt dabei eine Middleware Software zum Einsatz, die das Publish/Subscribe Kommunikationsmuster unterstützt. Dabei senden Publisher Informationen in Form von Nachrichten an die Middleware. Die Subscriber hingegen zeigen durch die Nutzung von Filtern der Middleware an, welche Informationen zugestellt werden sollen. Die Arbeit beschreibt ein dreistufiges Verfahren zur Leistungsbestimmung eines solchen Systems. Zunächst wird durch Messung die Leistung von Publish/Subscribe Systemen in verschiedenen Szenarien untersucht am Beispiel von Java Message Service (JMS) basierten Implementierungen. Danach wird der maximale Nachrichtendurchsatz in Abhängigkeit der Filterkomplexität und des Nachrichtenreplikationsgrades durch einfache Modelle beschrieben. Damit können die Leistungskennwerte für ein System und vorgegebenen Randbedingungen beschrieben werden. Im dritten Teil wird mittels Leistungsbewertung und durch Anwendung eines Warteschlangenmodells die Leistung in praxisnahen Umfeld beschrieben, so dass eine Dimensionierung möglich wird. Zusätzlich wird ein mathematisch, approximatives Verfahren vorgestellt, um ein M/G/1 System numerisch effizient berechnen zu können, was bei der Echtzeitbewertung eines Systems zur Leistungsvorhersage benutzt werden kann. Des Weiteren werden mittels des Modells Möglichkeiten untersucht die Skalierbarkeit des Gesamtsystems in Bezug auf den Nachrichtendurchsatz sicherzustellen. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 04/10 KW - Middleware KW - Publish-Subscribe-System KW - Java Message Service KW - Leistungsbewertung KW - Middleware KW - Publish-Subscribe-System KW - Java Message Service KW - Performance Evaluation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53388 ER - TY - CHAP ED - Kolla, Reiner T1 - 9. Fachgespräch Sensornetze der GI/ITG Fachgruppe Kommunikation und Verteilte Systeme N2 - Jährliches Fachgespräch zu Sensornetzen der GI/ITG Fachgruppe Kommunikation und Verteilte Systeme, 16. - 17. September 2010, Universität Würzburg KW - Drahtloses Sensorsystem KW - Fachgespräch KW - Aufsatzsammlung KW - sensor network KW - wireless network Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51106 ER - TY - THES A1 - Zeiger, Florian T1 - Internet Protocol based networking of mobile robots T1 - Internet Protokoll basierte Vernetzung von mobilen Robotern N2 - This work is composed of three main parts: remote control of mobile systems via Internet, ad-hoc networks of mobile robots, and remote control of mobile robots via 3G telecommunication technologies. The first part gives a detailed state of the art and a discussion of the problems to be solved in order to teleoperate mobile robots via the Internet. The focus of the application to be realized is set on a distributed tele-laboratory with remote experiments on mobile robots which can be accessed world-wide via the Internet. Therefore, analyses of the communication link are used in order to realize a robust system. The developed and implemented architecture of this distributed tele-laboratory allows for a smooth access also with a variable or low link quality. The second part covers the application of ad-hoc networks for mobile robots. The networking of mobile robots via mobile ad-hoc networks is a very promising approach to realize integrated telematic systems without relying on preexisting communication infrastructure. Relevant civilian application scenarios are for example in the area of search and rescue operations where first responders are supported by multi-robot systems. Here, mobile robots, humans, and also existing stationary sensors can be connected very fast and efficient. Therefore, this work investigates and analyses the performance of different ad-hoc routing protocols for IEEE 802.11 based wireless networks in relevant scenarios. The analysis of the different protocols allows for an optimization of the parameter settings in order to use these ad-hoc routing protocols for mobile robot teleoperation. Also guidelines for the realization of such telematics systems are given. Also traffic shaping mechanisms of application layer are presented which allow for a more efficient use of the communication link. An additional application scenario, the integration of a small size helicopter into an IP based ad-hoc network, is presented. The teleoperation of mobile robots via 3G telecommunication technologies is addressed in the third part of this work. The high availability, high mobility, and the high bandwidth provide a very interesting opportunity to realize scenarios for the teleoperation of mobile robots or industrial remote maintenance. This work analyses important parameters of the UMTS communication link and investigates also the characteristics for different data streams. These analyses are used to give guidelines which are necessary for the realization of or industrial remote maintenance or mobile robot teleoperation scenarios. All the results and guidelines for the design of telematic systems in this work were derived from analyses and experiments with real hardware. N2 - Diese Arbeit gliedert sich in drei Hauptteile: Fernsteuerung mobiler Systeme über das Internet, ad-hoc Netzwerke mobiler Roboter und Fernsteuerung mobiler Roboter über Mobilfunktechnologien der 3. Generation. Im ersten Teil werden ein ausführlicher Stand der Technik und eine Diskussion der bei der Fernsteuerung mobiler Roboter über das Internet zu lösenden Probleme gegeben. Der Fokus der zu realisierenden Anwendung in diesem Teil der Arbeit liegt auf einem verteilten Tele-Labor mit Experimenten zu mobilen Robotern, welche über das Internet weltweit zugänglich sind. Hierzu werden Link-Analysen der zugrundeliegenden Kommunikationsinfrastruktur zu Hilfe genommen, um ein robustes System zu realisieren. Die entwickelte und implementierte Architektur des verteilten Tele-Labors erlaubt einen reibungslosen Zugang auch für Verbindungen mit variabler oder schlechter Linkqualität. Im zweiten Teil werden ad-hoc Netzwerke mobiler Roboter behandelt. Die Vernetzung mobiler Roboter über mobile ad-hoc Netzwerke ist eine vielversprechende Möglichkeit um integrierte Telematiksysteme zu realisieren ohne auf zuvor existierende Infrastruktur angewiesen zu sein. Relevante Einsatzszenarien im zivilen Bereich sind zum Beispiel Such- und Rettungsszenarien, in denen die Rettungskräfte vor Ort durch vernetzte Multi-Roboter Systeme unterstütz werden. Hier werden dann mobile Roboter, Menschen und gegebenenfalls auch vorhandene stationäre Sensoren schnell und effizient vernetzt. In dieser Arbeit werden dazu verschieden ad-hoc Routing-Protokolle für IEEE 802.11 basierte Drahtlosnetzwerke in relevanten Szenarien untersucht und deren Leistungsfähigkeit verglichen. Die Analyse der verschiedenen Protokolle erlaubt eine Optimierung der Parametereinstellung, um diese ad-hoc Routing-Protokolle zur Fernsteuerung mobiler Roboter nutzbar zu machen. Weiterhin werden Richtlinien zur Realisierung solcher Telematiksysteme erarbeitet und Mechanismen zur Verkehrsformung auf Applikationsebene präsentiert, die eine effizientere Nutzung der vorhandenen Kommunikationskanäle erlauben. Als weiteres Anwendungsbeispiel ist die Integration eines ferngesteuerten Kleinhubschraubers in ein IP basiertes ad-hoc Netz beschrieben. Der dritte Teil der Arbeit beschäftigt sich mit der Fernsteuerung mobiler Roboter über Mobilfunktechnologien der 3. Generation. Die hohe Verfügbarkeit der UMTS-Technologie mit der verbundenen Mobilität und der gleichzeitigen hohen Bandbreite bietet hier eine interessante Möglichkeit um die Fernsteuerung mobiler Roboter oder auch interaktive Fernwartungsszenarien zu realisieren. In der vorliegenden Arbeit werden wichtige Parameter der UMTS Verbindung analysiert und auch die Charakteristiken der Verbindung für verschiedene Verkehrsströme ermittelt. Diese dienen dann zur Erstellung von Richtlinien, die zur Umsetzung der interaktive Fernwartungsszenarien oder auch der Fernsteuerung mobiler Roboter nötig sind. Die in dieser Arbeit erstellten Richtlinien zum Entwurf von Telematiksystemen wurden aus Analysen und Experimenten mit realer Hardware abgeleitet. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 4 KW - Robotik KW - Mobiler Roboter KW - Fernsteuerung KW - vernetzte Roboter KW - Telematik KW - Fernsteuerung KW - Robotik KW - Internet Protokoll KW - networked robotics KW - telematics KW - remote control KW - robotics KW - internet protocol Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-54776 SN - 978-3-923959-59-4 ER - TY - THES A1 - Sauer, Markus T1 - Mixed-Reality for Enhanced Robot Teleoperation T1 - Mixed-Reality zur verbesserten Fernbedienung von Robotern N2 - In den letzten Jahren ist die Forschung in der Robotik soweit fortgeschritten, dass die Mensch-Maschine Schnittstelle zunehmend die kritischste Komponente für eine hohe Gesamtperformanz von Systemen zur Navigation und Koordination von Robotern wird. In dieser Dissertation wird untersucht wie Mixed-Reality Technologien für Nutzerschnittstellen genutzt werden können, um diese Gesamtperformanz zu erhöhen. Hierzu werden Konzepte und Technologien entwickelt, die durch Evaluierung mit Nutzertest ein optimiertes und anwenderbezogenes Design von Mixed-Reality Nutzerschnittstellen ermöglichen. Er werden somit sowohl die technische Anforderungen als auch die menschlichen Faktoren für ein konsistentes Systemdesign berücksichtigt. Nach einer detaillierten Problemanalyse und der Erstellung eines Systemmodels, das den Menschen als Schlüsselkomponente mit einbezieht, wird zunächst die Anwendung der neuartigen 3D-Time-of-Flight Kamera zur Navigation von Robotern, aber auch für den Einsatz in Mixed-Reality Schnittstellen analysiert und optimiert. Weiterhin wird gezeigt, wie sich der Netzwerkverkehr des Videostroms als wichtigstes Informationselement der meisten Nutzerschnittstellen für die Navigationsaufgabe auf der Netzwerk Applikationsebene in typischen Multi-Roboter Netzwerken mit dynamischen Topologien und Lastsituation optimieren lässt. Hierdurch ist es möglich in sonst in sonst typischen Ausfallszenarien den Videostrom zu erhalten und die Bildrate zu stabilisieren. Diese fortgeschrittenen Technologien werden dann auch dem entwickelten Konzept der generischen 3D Mixed Reality Schnittselle eingesetzt. Dieses Konzept ermöglicht eine integrierte 3D Darstellung der verfügbaren Information, so dass räumliche Beziehungen von Informationen aufrechterhalten werden und somit die Anzahl der mentalen Transformationen beim menschlichen Bediener reduziert wird. Gleichzeitig werden durch diesen Ansatz auch immersive Stereo Anzeigetechnologien unterstützt, welche zusätzlich das räumliche Verständnis der entfernten Situation fördern. Die in der Dissertation vorgestellten und evaluierten Ansätze nutzen auch die Tatsache, dass sich eine lokale Autonomie von Robotern heute sehr robust realisieren lässt. Dies wird zum Beispiel zur Realisierung eines Assistenzsystems mit variabler Autonomie eingesetzt. Hierbei erhält der Fernbediener über eine Kraftrückkopplung kombiniert mit einer integrierten Augmented Reality Schnittstelle, einen Eindruck über die Situation am entfernten Arbeitsbereich, aber auch über die aktuelle Navigationsintention des Roboters. Die durchgeführten Nutzertests belegen die signifikante Steigerung der Navigationsperformanz durch den entwickelten Ansatz. Die robuste lokale Autonomie ermöglicht auch den in der Dissertation eingeführten Ansatz der prädiktiven Mixed-Reality Schnittstelle. Die durch diesen Ansatz entkoppelte Regelschleife über den Menschen ermöglicht es die Sichtbarkeit von unvermeidbaren Systemverzögerungen signifikant zu reduzieren. Zusätzlich können durch diesen Ansatz beide für die Navigation hilfreichen Blickwinkel in einer 3D-Nutzerschnittstelle kombiniert werden – der exozentrische Blickwinkel und der egozentrische Blickwinkel als Augmented Reality Sicht. N2 - With the progress in robotics research the human machine interfaces reach more and more the status of being the major limiting factor for the overall system performance of a system for remote navigation and coordination of robots. In this monograph it is elaborated how mixed reality technologies can be applied for the user interfaces in order to increase the overall system performance. Concepts, technologies, and frameworks are developed and evaluated in user studies which enable for novel user-centered approaches to the design of mixed-reality user interfaces for remote robot operation. Both the technological requirements and the human factors are considered to achieve a consistent system design. Novel technologies like 3D time-of-flight cameras are investigated for the application in the navigation tasks and for the application in the developed concept of a generic mixed reality user interface. In addition it is shown how the network traffic of a video stream can be shaped on application layer in order to reach a stable frame rate in dynamic networks. The elaborated generic mixed reality framework enables an integrated 3D graphical user interface. The realized spatial integration and visualization of available information reduces the demand for mental transformations for the human operator and supports the use of immersive stereo devices. The developed concepts make also use of the fact that local robust autonomy components can be realized and thus can be incorporated as assistance systems for the human operators. A sliding autonomy concept is introduced combining force and visual augmented reality feedback. The force feedback component allows rendering the robot's current navigation intention to the human operator, such that a real sliding autonomy with seamless transitions is achieved. The user-studies prove the significant increase in navigation performance by application of this concept. The generic mixed reality user interface together with robust local autonomy enables a further extension of the teleoperation system to a short-term predictive mixed reality user interface. With the presented concept of operation, it is possible to significantly reduce the visibility of system delays for the human operator. In addition, both advantageous characteristics of a 3D graphical user interface for robot teleoperation- an exocentric view and an augmented reality view – can be combined. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 5 KW - Mobiler Roboter KW - Autonomer Roboter KW - Mensch-Maschine-Schnittstelle KW - Mixed Reality KW - Mensch-Roboter-Interaktion KW - Teleoperation KW - Benutzerschnittstelle KW - Robotik KW - Mensch-Maschine-System KW - Human-Robot-Interaction KW - Teleoperation KW - User Interface Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55083 SN - 978-3-923959-67-9 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Markup overlap: Improving Fragmentation Method N2 - Overlapping is a common word used to describe documents whose structural dimensions cannot be adequately represented using tree structure. For instance a quotation that starts in one verse and ends in another verse. The problem of overlapping hierarchies is a recurring one, which has been addressed by a variety of approaches. There are XML based solutions as well as Non-XML ones. The XML-based solutions are: multiple documents, empty elements, fragmentation, out-of-line markup, JITT and BUVH. And the Non-XML approaches comprise CONCUR/XCONCUR, MECS, LMNL ...etc. This paper presents shortly state-of-the-art in overlapping hierarchies, and introduces two variations on the TEI fragmentation markup that have several advantages. KW - XML KW - Überlappung KW - Fragmentierung KW - XML KW - Overlapping KW - Fragmentation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-49084 ER - TY - THES A1 - Klein, Alexander T1 - Performance Issues of MAC and Routing Protocols in Wireless Sensor Networks T1 - Leistungsbeschränkende Faktoren von MAC und Routingprotokollen in drahtlosen Sensornetzen N2 - The focus of this work lies on the communication issues of Medium Access Control (MAC) and routing protocols in the context of WSNs. The communication challenges in these networks mainly result from high node density, low bandwidth, low energy constraints and the hardware limitations in terms of memory, computational power and sensing capabilities of low-power transceivers. For this reason, the structure of WSNs is always kept as simple as possible to minimize the impact of communication issues. Thus, the majority of WSNs apply a simple one hop star topology since multi-hop communication has high demands on the routing protocol since it increases the bandwidth requirements of the network. Moreover, medium access becomes a challenging problem due to the fact that low-power transceivers are very limited in their sensing capabilities. The first contribution is represented by the Backoff Preamble-based MAC Protocol with Sequential Contention Resolution (BPS-MAC) which is designed to overcome the limitations of low-power transceivers. Two communication issues, namely the Clear Channel Assessment (CCA) delay and the turnaround time, are directly addressed by the protocol. The CCA delay represents the period of time which is required by the transceiver to detect a busy radio channel while the turnaround time specifies the period of time which is required to switch between receive and transmit mode. Standard Carrier Sense Multiple Access (CSMA) protocols do not achieve high performance in terms of packet loss if the traffic is highly correlated due to the fact that the transceiver is not able to sense the medium during the switching phase. Therefore, a node may start to transmit data while another node is already transmitting since it has sensed an idle medium right before it started to switch its transceiver from receive to transmit mode. The BPS-MAC protocol uses a new sequential preamble-based medium access strategy which can be adapted to the hardware capabilities of the transceivers. The protocol achieves a very low packet loss rate even in wireless networks with high node density and event-driven traffic without the need of synchronization. This makes the protocol attractive to applications such as structural health monitoring, where event suppression is not an option. Moreover, acknowledgments or complex retransmission strategies become almost unnecessary since the sequential preamble-based contention resolution mechanism minimizes the collision probability. However, packets can still be lost as a consequence of interference or other issues which affect signal propagation. The second contribution consists of a new routing protocol which is able to quickly detect topology changes without generating a large amount of overhead. The key characteristics of the Statistic-Based Routing (SBR) protocol are high end-to-end reliability (in fixed and mobile networks), load balancing capabilities, a smooth continuous routing metric, quick adaptation to changing network conditions, low processing and memory requirements, low overhead, support of unidirectional links and simplicity. The protocol can establish routes in a hybrid or a proactive mode and uses an adaptive continuous routing metric which makes it very flexible in terms of scalability while maintaining stable routes. The hybrid mode is optimized for low-power WSNs since routes are only established on demand. The difference of the hybrid mode to reactive routing strategies is that routing messages are periodically transmitted to maintain already established routes. However, the protocol stops the transmission of routing messages if no data packets are transmitted for a certain time period in order to minimize the routing overhead and the energy consumption. The proactive mode is designed for high data rate networks which have less energy constraints. In this mode, the protocol periodically transmits routing messages to establish routes in a proactive way even in the absence of data traffic. Thus, nodes in the network can immediately transmit data since the route to the destination is already established in advance. In addition, a new delay-based routing message forwarding strategy is introduced. The forwarding strategy is part of SBR but can also be applied to many routing protocols in order to modify the established topology. The strategy can be used, e.g. in mobile networks, to decrease the packet loss by deferring routing messages with respect to the neighbor change rate. Thus, nodes with a stable neighborhood forward messages faster than nodes within a fast changing neighborhood. As a result, routes are established through nodes with correlated movement which results in fewer topology changes due to higher link durations. N2 - Im Rahmen dieser Arbeit werden leistungsbeschränkende Faktoren von Medium Access Control (MAC) und Routingprotokollen im Kontext von drahtlosen Sensornetzen untersucht. Zunächst werden typische Probleme des Funkkanals diskutiert. Anschließend führen eine Einteilung von MAC Protokollen, sowie eine Gegenüberstellung relevanter Protokolle in die Thematik ein. Daraufhin werden hardwarelimitierende Faktoren und deren Auswirkung auf die Effizienz von Kanalzugriffsprotokollen untersucht. Des Weiteren wird das vom Autor entwickelte Backoff Preamble-based MAC Protokoll (BPS-MAC) vorgestellt, welches auf die limitierten Fähigkeiten sensortypischer Hardware eingeht und für dichte Sensornetze mit korreliertem Datenverkehr optimiert ist. Ein weiterer Schwerpunkt dieser Arbeit stellt das Thema Routing dar. Hier wird ebenfalls mit einer Einteilung der Protokolle in die Thematik eingeführt. Darüber hinaus werden die wichtigsten Aufgaben von Routingprotokollen vorgestellt. Ein Überblick über häufig verwendete Routingmetriken und Routingprotokolle schließen die Einführung in diesen Themenkomplex ab. Abschließend wird das im Rahmen der Dissertation entwickelte Statistic-Based-Routing (SBR) Protokoll vorgestellt, welches ebenfalls für drahtlose Sensornetze optimiert ist. Der letzte Schwerpunkt beschreibt die Problematik der Leistungsbewertung von Routingprotokollen hinsichtlich klassischer Leistungsparameter wie Paketverlust und Verzögerung. Ebenfalls werden weitere Leistungsparameter wie zum Beispiel die vom Nutzer wahrgenommene Netzqualität genauer untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/10 KW - Routing KW - Drahtloses Sensorsystem KW - Leistungsbewertung KW - Diskrete Simulation KW - MAC KW - Kanalzugriff KW - Medium KW - MAC KW - routing KW - sensor KW - networks KW - simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52870 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Understanding the Vex Rendering Engine N2 - The Visual Editor for XML (Vex)[1] used by TextGrid [2]and other applications has got rendering and layout engines. The layout engine is well documented but the rendering engine is not. This lack of documenting the rendering engine has made refactoring and extending the editor hard and tedious. For instance many CSS2.1 and upcoming CSS3 properties have not been implemented. Software developers in different projects such as TextGrid using Vex would like to update its CSS rendering engine in order to provide advanced user interfaces as well as support different document types. In order to minimize the effort of extending Vex functionality, I found it beneficial to write a basic documentation about Vex software architecture in general and its CSS rendering engine in particular. The documentation is mainly based on the idea of architectural layered diagrams. In fact layered diagrams can help developers understand software’s source code faster and easier in order to alter it, and fix errors. This paper is written for the purpose of providing direct support for exploration in the comprehension process of Vex source code. It discusses Vex software architecture. The organization of packages that make up the software, the architecture of its CSS rendering engine, an algorithm explaining the working principle of its rendering engine are described. KW - Cascading Style Sheets KW - Softwarearchitektur KW - CSS KW - Processing model KW - Software architecture KW - Software design Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51333 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Reference Architecture, Design of Cascading Style Sheets Processing Model N2 - The technique of using Cascading Style Sheets (CSS) to format and present structured data is called CSS processing model. For instance a CSS processing model for XML documents describes steps involved in formatting and presenting XML documents on screens or papers. Many software applications such as browsers and XML editors have their own CSS processing models which are part of their rendering engines. For instance each browser based on its CSS processing model renders CSS layout differently, as a result an inconsistency in the support of CSS features arises. Some browsers support more CSS features than others, and the rendering itself varies. Moreover the W3C standards are not even adhered by some browsers such as Internet Explorer. Test suites and other hacks and filters cannot definitely solve these problems, because these solutions are temporary and fragile. To palliate this inconsistency and browser compatibility issues with respect to CSS, a reference CSS processing model is needed. By extension it could even allow interoperability across CSS rendering engines. A reference architecture would provide common software architecture and interfaces, and facilitate refactoring, reuse, and automated unit testing. In [2] a reference architecture for browsers has been proposed. However this reference architecture is a macro reference model which does not consider separately individual components of rendering and layout engines. In this paper an attempt to develop a reference architecture for CSS processing models is discussed. In addition the Vex editor [3] rendering and layout engines, as well as an extended version of the editor used in TextGrid project [5] are also presented in order to validate the proposed reference architecture. KW - Cascading Style Sheets KW - XML KW - Softwarearchitektur KW - CSS KW - XML KW - Processing Model KW - Reference Architecture Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51328 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Empirical Study on Screen Scraping Web Service Creation: Case of Rhein-Main-Verkehrsverbund (RMV) N2 - Internet is the biggest database that science and technology have ever produced. The world wide web is a large repository of information that cannot be used for automation by many applications due to its limited target audience. One of the solutions to the automation problem is to develop wrappers. Wrapping is a process whereby unstructured extracted information is transformed into a more structured one such as XML, which could be provided as webservice to other applications. A web service is a web page whose content is well structured so that a computer program can consume it automatically. This paper describes steps involved in constructing wrappers manually in order to automatically generate web services. KW - HTML KW - XML KW - Wrapper KW - Web service KW - HTML KW - XML KW - Wrapper KW - Web service Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-49396 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Java Web Frameworks Which One to Choose? N2 - This article discusses web frameworks that are available to a software developer in Java language. It introduces MVC paradigm and some frameworks that implement it. The article presents an overview of Struts, Spring MVC, JSF Frameworks, as well as guidelines for selecting one of them as development environment. KW - Java Frameworks KW - MVC KW - Struts KW - Spring KW - JSF Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-49407 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Doing Webservices Composition by Content-based Mashup: Example of a Web-based Simulator for Itinerary Planning N2 - Webservices composition is traditionally carried out using composition technologies such as Business Process Execution Language (BPEL) [1] and Web Service Choreography Interface (WSCI) [2]. The composition technology involves the process of web service discovery, invocation, and composition. However these technologies are not easy and flexible enough because they are mainly developer-centric. Moreover majority of websites have not yet embarked into the world of web service, although they have very important and useful information to offer. Is it because they have not understood the usefulness of web services or is it because of the costs? Whatever might be the answers to these questions, time and money are definitely required in order to create and offer web services. To avoid these expenditures, wrappers [7] to automatically generate webservices from websites would be a cheaper and easier solution. Mashups offer a different way of doing webservices composition. In web environment a Mashup is a web application that brings together data from several sources using webservices, APIs, wrappers and so on, in order to create entirely a new application that was not provided before. This paper presents first an overview of Mashups and the process of web service invocation and composition based on Mashup, then describes an example of a web-based simulator for navigation system in Germany. KW - Mashup KW - Wrapper KW - Mashup KW - Webservice Composition KW - Wrappers Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50036 ER - TY - JOUR A1 - Vainshtein, Yevhen A1 - Sanchez, Mayka A1 - Brazma, Alvis A1 - Hentze, Matthias W. A1 - Dandekar, Thomas A1 - Muckenthaler, Martina U. T1 - The IronChip evaluation package: a package of perl modules for robust analysis of custom microarrays N2 - Background: Gene expression studies greatly contribute to our understanding of complex relationships in gene regulatory networks. However, the complexity of array design, production and manipulations are limiting factors, affecting data quality. The use of customized DNA microarrays improves overall data quality in many situations, however, only if for these specifically designed microarrays analysis tools are available. Results: The IronChip Evaluation Package (ICEP) is a collection of Perl utilities and an easy to use data evaluation pipeline for the analysis of microarray data with a focus on data quality of custom-designed microarrays. The package has been developed for the statistical and bioinformatical analysis of the custom cDNA microarray IronChip but can be easily adapted for other cDNA or oligonucleotide-based designed microarray platforms. ICEP uses decision tree-based algorithms to assign quality flags and performs robust analysis based on chip design properties regarding multiple repetitions, ratio cut-off, background and negative controls. Conclusions: ICEP is a stand-alone Windows application to obtain optimal data quality from custom-designed microarrays and is freely available here (see “Additional Files” section) and at: http://www.alice-dsl.net/evgeniy. vainshtein/ICEP/ KW - Microarray KW - ICEP KW - IronChip Evaluation Package Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-67869 ER - TY - JOUR A1 - Schmid, Benjamin A1 - Schindelin, Johannes A1 - Cardona, Albert A1 - Longair, Martin A1 - Heisenberg, Martin T1 - A high-level 3D visualization API for Java and ImageJ N2 - Background: Current imaging methods such as Magnetic Resonance Imaging (MRI), Confocal microscopy, Electron Microscopy (EM) or Selective Plane Illumination Microscopy (SPIM) yield three-dimensional (3D) data sets in need of appropriate computational methods for their analysis. The reconstruction, segmentation and registration are best approached from the 3D representation of the data set. Results: Here we present a platform-independent framework based on Java and Java 3D for accelerated rendering of biological images. Our framework is seamlessly integrated into ImageJ, a free image processing package with a vast collection of community-developed biological image analysis tools. Our framework enriches the ImageJ software libraries with methods that greatly reduce the complexity of developing image analysis tools in an interactive 3D visualization environment. In particular, we provide high-level access to volume rendering, volume editing, surface extraction, and image annotation. The ability to rely on a library that removes the low-level details enables concentrating software development efforts on the algorithm implementation parts. Conclusions: Our framework enables biomedical image software development to be built with 3D visualization capabilities with very little effort. We offer the source code and convenient binary packages along with extensive documentation at http://3dviewer.neurofly.de. KW - Visualisierung KW - Java 3D KW - ImageJ KW - framework Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-67851 ER - TY - THES A1 - Fehler, Manuel T1 - Kalibrierung Agenten-basierter Simulationen T1 - Calibration of Agent-based Simulations N2 - In der vorliegenden Arbeit wird das Problem der Kalibrierung Agenten-basierter Simulationen (ABS) behandelt, also das Problem, die Parameterwerte eines Agenten-basierten Simulationsmodells so einzustellen, dass valides Simulationsverhalten erreicht wird. Das Kalibrierungsproblem für Simulationen an sich ist nicht neu und ist im Rahmen klassischer Simulationsparadigmen, wie z.B. der Makro-Simulation, fester Bestandteil der Forschung. Im Vergleich zu den dort betrachteten Kalibrierungsproblemen zeichnet sich das Kalibrierungsproblem für ABS jedoch durch eine Reihe zusätzlicher Herausforderungen aus, welche die direkte Anwendung existierender Kalibrierungsverfahren in begrenzter Zeit erschweren, bzw. nicht mehr sinnvoll zulassen. Die Lösung dieser Probleme steht im Zentrum dieser Dissertation: Das Ziel besteht darin, den Nutzer bei der Kalibrierung von ABS auf der Basis von unzureichenden, potentiell fehlerhaften Daten und Wissen zu unterstützen. Dabei sollen drei Hauptprobleme gelöst werden: 1)Vereinfachung der Kalibrierung großer Agenten-Parametermengen auf der Mikro- Ebene in Agenten-basierten Simulationen durch Ausnutzung der spezifischen Struktur von ABS (nämlich dem Aufbau aus einer Menge von Agentenmodellen). 2)Kalibrierung Agenten-basierter Simulationen, so dass auf allen relevanten Beobachtungsebenen valides Simulationsverhalten erzeugt wird (mindestens Mikro und Makro-Ebene). Als erschwerende Randbedingung muss die Kalibrierung unter der Voraussetzung einer Makro-Mikro-Wissenslücke durchgeführt werden. 3)Kalibrierung Agenten-basierter Simulationen auf der Mikro-Ebene unter der Voraussetzung, dass zur Kalibrierung einzelner Agentenmodelle nicht ausreichend und potentiell verfälschte Daten zur Verhaltensvalidierung zur Verfügung stehen. Hierzu wird in dieser Arbeit das sogenannte Makro-Mikro-Verfahren zur Kalibrierung von Agenten-basierten Simulationen entwickelt. Das Verfahren besteht aus einem Basisverfahren, das im Verlauf der Arbeit um verschiedene Zusatzverfahren erweitert wird. Das Makro-Mikro-Verfahren und seine Erweiterungen sollen dazu dienen, die Modellkalibrierung trotz stark verrauschter Daten und eingeschränktem Wissen über die Wirkungszusammenhänge im Originalsystem geeignet zu ermöglichen und dabei den Kalibrierungsprozess zu beschleunigen: 1) Makro-Mikro-Kalibrierungsverfahren: Das in dieser Arbeit entwickelte Makro- Mikro-Verfahren unterstützt den Nutzer durch eine kombinierte Kalibrierung auf der Mikro- und der Makro-Beobachtungsebene, die gegebenenfalls durch Zwischenebenen erweitert werden kann. Der Grundgedanke des Verfahrens besteht darin, das Kalibrierungsproblem in eines auf aggregierter Verhaltensebene und eines auf der Ebene des Mikro-Agentenverhaltens aufzuteilen. Auf der Makro-Ebene wird nach validen idealen aggregierten Verhaltensmodellen (IVM) der Agenten gesucht. Auf der Mikro-Ebene wird versucht die individuellen Modelle der Agenten auf Basis des erwünschten Gesamtverhaltens und der ermittelten IVM so zu kalibrieren, das insgesamt Simulationsverhalten entsteht, das sowohl auf Mikro- als auch auf Makro-Ebene valide ist. 2) Erweiterung 1: Robuste Kalibrierung: Um den Umgang mit potentiell verrauschten Validierungskriterien (d.h. mit verrauschten Daten über ein Originalsystem, auf denen die Validierungskriterien der Simulation beruhen) und Modellteilen während der Kalibrierung von ABS zu ermöglichen, wird eine robuste Kalibrierungstechnik zur Anwendung im Makro-Mikro-Verfahren entwickelt. 3) Erweiterung 2: Kalibrierung mit Heterogenitätssuche: Als zweite Erweiterung des Makro-Mikro-Verfahrens wird ein Verfahren entwickelt, das das Problem des unklaren Detaillierungsgrades von ABS auf der Ebene der Parameterwerte adressiert. Prinzipiell kann zwar jeder Agent unterschiedliche Parameterwerte verwenden, obwohl eine geringere Heterogenität zur Erzeugung validen Verhaltens ausreichend wäre. Die entwickelte Erweiterung versucht, während der Kalibrierung, eine geeignete Heterogenitätsausprägung für die Parameterwerte der Agenten zu ermitteln. Unter einer Heterogenitätsausprägung wird dabei eine Einteilung der simulierten Agenten in Gruppen mit jeweils gleichen Parameterwerten verstanden. Die Heterogenitätssuche dient dazu, einen Kompromiss zu finden zwischen der Notwendigkeit, sehr große Parametersuchräume durchsuchen zu müssen und gleichzeitig den Suchraum so klein wie möglich halten zu wollen. N2 - In this doctoral thesis the problem of calibrating agent-based simulations (ABS) is treated, i.e. the problem to adjust the parameter values of an agent-based simulation model to achieve valid simulation behavior. The calibration problem for simulations per se is not new and is an active part of research in the context of traditional simulation paradigms, such as the macro-simulation. Compared to the problems considered there the problems for ABS can be distinguished by several additional challenges that complicate the direct application of existing calibration procedures in a limited time, or challenges that do not allow applying existing procedures at all. The goal of this thesis is to assist the user in the calibration of ABS on the basis of incomplete and potentially noisy data or knowledge and in dealing with large amounts of parameter values if an ABS with many individual agents needs to be calibrated. The thesis covers the following three main topics: 1) Simplification of the calibration of many agent parameter values on the micro-level in ABS. This is done by exploiting the specific structure of ABS (i.e. that an ABS constitutes of a lattice of agent models). 2) Calibration of agent-based simulations, so that valid simulation behavior is created on all relevant behavior observation levels (at least micro- and macro-level). This needs to be possible without having full knowledge about how the macro observation level behavior constitutes from the modeled micro behavior. 3) Calibration of agent-based simulations on the micro-level under the constraint that only partial and potentially noisy data for testing and validation of single individual agent models is available. To achieve this the so-called “Macro-Micro Procedure” for calibrating agent-based simulations is developed. The approach consists of a basic procedure that is extended in the course of the work with various additional techniques: 1)Macro-Micro-Calibration Procedure: The Macro-Micro Procedure supports the user by applying a combined calibration on the micro and the macro-observation level, which can optionally be expanded using additional intermediate levels. The basic idea of the procedure consists of separating the calibration problem into one at the aggregate behavior level and one at the level of the micro-agent behavior. At the macro level, valid simulation behavior for ideal aggregate behavior models (IAM) of agents is being determined. At the micro level, the goal is to calibrate the models of the individual agents based on the desired overall behavior and the determined IAM from the macro level. Upon completion the simulation behavior created shall be valid both at the micro and also at a macro level. 2)Extension 1: Robust Calibration: In order to deal with potentially noisy validation criteria and model parts (i.e. with noisy data about the original system from which the validation criteria of the simulation are created) a robust calibration technique is developed that can be used as part of the Macro-Micro-Procedure. 3)Extension 2: Calibration with heterogeneity search: The second extension of the Macro-Micro-Procedure addresses the problem of an unclear level of detail on the level of the parameter values. Theoretically it is possible to use different parameter values for each individual simulated agent which leads to a huge parameter search space. Often it is however sufficient to use a lower heterogeneity in the parameter values to generate valid behavior which would allow calibration in a smaller search space. The developed extension attempts to determine such a suitable heterogeneity manifestation for the parameter values of the agents as part of the calibration process itself. A heterogeneity manifestation is performed by dividing the agents into groups of agents with homogenous parameter values. The developed heterogeneity search offers a compromise between the necessity of having to search very large parameter search spaces and the goal to keep the search space as small as possible during the calibration. KW - Computersimulation KW - Mehrebenensimulation KW - Autonomer Agent KW - Agenten-basierte Simulation KW - Multiagentensimulation KW - Parameterkalibrierung KW - Hierarchische Simulation KW - Simulation KW - Agent KW - Calibration KW - Optimization KW - Agent-based Simulation KW - Multi-Agent-Simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-64762 ER - TY - THES A1 - Pries, Jan Rastin T1 - Performance Optimization of Wireless Infrastructure and Mesh Networks T1 - Leistungsoptimierung von drahtlosen Infrastruktur und Mesh Netzen N2 - Future broadband wireless networks should be able to support not only best effort traffic but also real-time traffic with strict Quality of Service (QoS) constraints. In addition, their available resources are scare and limit the number of users. To facilitate QoS guarantees and increase the maximum number of concurrent users, wireless networks require careful planning and optimization. In this monograph, we studied three aspects of performance optimization in wireless networks: resource optimization in WLAN infrastructure networks, quality of experience control in wireless mesh networks, and planning and optimization of wireless mesh networks. An adaptive resource management system is required to effectively utilize the limited resources on the air interface and to guarantee QoS for real-time applications. Thereby, both WLAN infrastructure and WLAN mesh networks have to be considered. An a-priori setting of the access parameters is not meaningful due to the contention-based medium access and the high dynamics of the system. Thus, a management system is required which dynamically adjusts the channel access parameters based on the network load. While this is sufficient for wireless infrastructure networks, interferences on neighboring paths and self-interferences have to be considered for wireless mesh networks. In addition, a careful channel allocation and route assignment is needed. Due to the large parameter space, standard optimization techniques fail for optimizing large wireless mesh networks. In this monograph, we reveal that biology-inspired optimization techniques, namely genetic algorithms, are well-suitable for the planning and optimization of wireless mesh networks. Although genetic algorithms generally do not always find the optimal solution, we show that with a good parameter set for the genetic algorithm, the overall throughput of the wireless mesh network can be significantly improved while still sharing the resources fairly among the users. N2 - Die Anbindung an das Internet erfolgt zunehmend über drahtlose Netze. Deren Ressourcen sind allerdings limitiert, was die Anzahl der unterstützten Nutzer stark einschränkt. Zudem ist ein Trend dieser Nutzer weg von der Verwendung reiner Datendienste zu Diensten mit Echtzeitanforderungen wie Voice over IP (VoIP) zu erkennen, deren Dienstgüteanforderungen eingehalten werden müssen. Heutige drahtlose Zugangsnetze sind jedoch nur für den herkömmlichen Datenverkehr ausgelegt. Der IEEE 802.11 WLAN Standard unterscheidet zwar zwischen verschiedenen Dienstklassen, gibt aber keine Dienstgütegarantien. Um die Dienstgüte (Quality of Service, QoS), bzw. die vom Nutzer erfahrene Dienstgüte (Quality of Experience, QoE) zu garantieren, müssen die zukünftigen drahtlosen Netze daher sorgfältig geplant und optimiert werden. Um die limitierten Ressourcen auf der Luftschnittstelle effektiv zu nutzen und um Dienstgüteanforderungen für Echtzeitanwendungen einzuhalten, bedarf es eines adaptiven Ressourcenmanagements. Dabei sind sowohl drahtlose Infrastruktur, als auch drahtlose Mesh-Netze zu betrachten. Durch den randomisierten Medienzugriff und die hohe Dynamik im System ist eine a-priori Wahl der Zugangsparameter nicht sinnvoll. Vielmehr wird ein Managementsystem benötigt, das die Zugangsparameter dynamisch in Abhängigkeit der Last in einem Netz wählt. Während dies für drahtlose Infrastrukturnetze ausreicht, müssen in drahtlosen Mesh-Netzen zusätzlich noch Interferenzen von Nachbarpfaden und Eigeninterferenzen berücksichtigt werden. Desweiteren ist eine sorgfältige Planung der Kanalzuweisung und des Routings notwendig, um einerseits den Durchsatz in drahtlosen Mesh-Netzen zu maximieren und andererseits die Ressourcen fair zwischen den Stationen aufzuteilen. Da es dabei eine Vielzahl von Parametern zu berücksichtigen gilt, sind neue Optimierungsmethoden notwendig, die es ermöglichen, auch große Mesh-Netze in annehmbarer Zeit zu planen und zu optimieren. Diese Doktorarbeit arbeitet die folgenden drei Optimierungsmöglichkeiten für drahtlose Zugangsnetze aus: Optimierung der Zugangsparameter in drahtlosen Infrastrukturnetzen, Optimierung von drahtlosen Mesh-Netzen unter Berücksichtigung der QoE und Planung und Optimierung von drahtlosen Mesh-Netzen mit Berücksichtigung einer fairen Ressourcenallokation. Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Optimierungsmöglichkeiten. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/10 KW - IEEE 802.11 KW - Leistungsbewertung KW - Optimierung KW - Dienstgüte KW - Netzplanung KW - Drahtloses lokales Netz KW - WLAN KW - Mesh Netze KW - Genetische Optimierung KW - WLAN KW - Optimization KW - Mesh Networks KW - Genetic Optimization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46097 ER - TY - CHAP A1 - Schlosser, Daniel A1 - Jarschel, Michael A1 - Duelli, Michael A1 - Hoßfeld, Tobias A1 - Hoffmann, Klaus A1 - Hoffmann, Marco A1 - Morper, Hans Jochen A1 - Jurca, Dan A1 - Khan, Ashiq T1 - A Use Case Driven Approach to Network Virtualization N2 - In today's Internet, services are very different in their requirements on the underlying transport network. In the future, this diversity will increase and it will be more difficult to accommodate all services in a single network. A possible approach to cope with this diversity within future networks is the introduction of support for running isolated networks for different services on top of a single shared physical substrate. This would also enable easy network management and ensure an economically sound operation. End-customers will readily adopt this approach as it enables new and innovative services without being expensive. In order to arrive at a concept that enables this kind of network, it needs to be designed around and constantly checked against realistic use cases. In this contribution, we present three use cases for future networks. We describe functional blocks of a virtual network architecture, which are necessary to support these use cases within the network. Furthermore, we discuss the interfaces needed between the functional blocks and consider standardization issues that arise in order to achieve a global consistent control and management structure of virtual networks. KW - Virtualisierung KW - Datenkommunikationsnetz KW - Internet KW - Rechnernetz KW - Anwendungsfall KW - Netzvirtualisierung KW - Standardisierung KW - Use case KW - network virtualization KW - future Internet architecture KW - standardization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55611 N1 - Accepted at IEEE Kaleidoscope 2010 ER - TY - JOUR A1 - Buchheim, Mark A. A1 - Keller, Alexander A1 - Koetschan, Christian A1 - Förster, Frank A1 - Merget, Benjamin A1 - Wolf, Matthias T1 - Internal Transcribed Spacer 2 (nu ITS2 rRNA) Sequence-Structure Phylogenetics: Towards an Automated Reconstruction of the Green Algal Tree of Life JF - PLoS ONE N2 - Background: Chloroplast-encoded genes (matK and rbcL) have been formally proposed for use in DNA barcoding efforts targeting embryophytes. Extending such a protocol to chlorophytan green algae, though, is fraught with problems including non homology (matK) and heterogeneity that prevents the creation of a universal PCR toolkit (rbcL). Some have advocated the use of the nuclear-encoded, internal transcribed spacer two (ITS2) as an alternative to the traditional chloroplast markers. However, the ITS2 is broadly perceived to be insufficiently conserved or to be confounded by introgression or biparental inheritance patterns, precluding its broad use in phylogenetic reconstruction or as a DNA barcode. A growing body of evidence has shown that simultaneous analysis of nucleotide data with secondary structure information can overcome at least some of the limitations of ITS2. The goal of this investigation was to assess the feasibility of an automated, sequence-structure approach for analysis of IT2 data from a large sampling of phylum Chlorophyta. Methodology/Principal Findings: Sequences and secondary structures from 591 chlorophycean, 741 trebouxiophycean and 938 ulvophycean algae, all obtained from the ITS2 Database, were aligned using a sequence structure-specific scoring matrix. Phylogenetic relationships were reconstructed by Profile Neighbor-Joining coupled with a sequence structure-specific, general time reversible substitution model. Results from analyses of the ITS2 data were robust at multiple nodes and showed considerable congruence with results from published phylogenetic analyses. Conclusions/Significance: Our observations on the power of automated, sequence-structure analyses of ITS2 to reconstruct phylum-level phylogenies of the green algae validate this approach to assessing diversity for large sets of chlorophytan taxa. Moreover, our results indicate that objections to the use of ITS2 for DNA barcoding should be weighed against the utility of an automated, data analysis approach with demonstrated power to reconstruct evolutionary patterns for highly divergent lineages. KW - RBCL Gene-sequences KW - Colonial volvocales chlorophyta KW - 26S RDNA Data KW - Land plants KW - Molecular systematics KW - Secondary structure KW - Nuclear RDNA KW - DNA KW - Barcodes KW - Dasycladales chlorophyta KW - Profile distances Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140866 VL - 6 IS - 2 ER - TY - THES A1 - Reitwießner, Christian T1 - Multiobjective Optimization and Language Equations T1 - Mehrkriterielle Optimierung und Sprachgleichungen N2 - Praktische Optimierungsprobleme beinhalten oft mehrere gleichberechtigte, sich jedoch widersprechende Kriterien. Beispielsweise will man bei einer Reise zugleich möglichst schnell ankommen, sie soll aber auch nicht zu teuer sein. Im ersten Teil dieser Arbeit wird die algorithmische Beherrschbarkeit solcher mehrkriterieller Optimierungsprobleme behandelt. Es werden zunächst verschiedene Lösungsbegriffe diskutiert und auf ihre Schwierigkeit hin verglichen. Interessanterweise stellt sich heraus, dass diese Begriffe für ein einkriterielles Problem stets gleich schwer sind, sie sich ab zwei Kriterien allerdings stark unterscheiden könen (außer es gilt P = NP). In diesem Zusammenhang wird auch die Beziehung zwischen Such- und Entscheidungsproblemen im Allgemeinen untersucht. Schließlich werden neue und verbesserte Approximationsalgorithmen für verschieden Varianten des Problems des Handlungsreisenden gefunden. Dabei wird mit Mitteln der Diskrepanztheorie eine Technik entwickelt, die ein grundlegendes Hindernis der Mehrkriteriellen Optimierung aus dem Weg schafft: Gegebene Lösungen so zu kombinieren, dass die neue Lösung in allen Kriterien möglichst ausgewogen ist und gleichzeitig die Struktur der Lösungen nicht zu stark zerstört wird. Der zweite Teil der Arbeit widmet sich verschiedenen Aspekten von Gleichungssystemen für (formale) Sprachen. Einerseits werden konjunktive und Boolesche Grammatiken untersucht. Diese sind Erweiterungen der kontextfreien Grammatiken um explizite Durchschnitts- und Komplementoperationen. Es wird unter anderem gezeigt, dass man bei konjunktiven Grammatiken die Vereinigungsoperation stark einschränken kann, ohne dabei die erzeugte Sprache zu ändern. Außerdem werden bestimmte Schaltkreise untersucht, deren Gatter keine Wahrheitswerte sondern Mengen von Zahlen berechnen. Für diese Schaltkreise wird das Äquivalenzproblem betrachtet, also die Frage ob zwei gegebene Schaltkreise die gleiche Menge berechnen oder nicht. Es stellt sich heraus, dass, abhängig von den erlaubten Gattertypen, die Komplexität des Äquivalenzproblems stark variiert und für verschiedene Komplexitätsklassen vollständig ist, also als (parametrisierter) Vertreter für diese Klassen stehen kann. N2 - Practical optimization problems often comprise several incomparable and conflicting objectives. When booking a trip using several means of transport, for instance, it should be fast and at the same time not too expensive. The first part of this thesis is concerned with the algorithmic solvability of such multiobjective optimization problems. Several solution notions are discussed and compared with respect to their difficulty. Interestingly, these solution notions are always equally difficulty for a single-objective problem and they differ considerably already for two objectives (unless P = NP). In this context, the difference between search and decision problems is also investigated in general. Furthermore, new and improved approximation algorithms for several variants of the traveling salesperson problem are presented. Using tools from discrepancy theory, a general technique is developed that helps to avoid an obstacle that is often hindering in multiobjective approximation: The problem of combining two solutions such that the new solution is balanced in all objectives and also mostly retains the structure of the original solutions. The second part of this thesis is dedicated to several aspects of systems of equations for (formal) languages. Firstly, conjunctive and Boolean grammars are studied, which are extensions of context-free grammars by explicit intersection and complementation operations, respectively. Among other results, it is shown that one can considerably restrict the union operation on conjunctive grammars without changing the generated language. Secondly, certain circuits are investigated whose gates do not compute Boolean values but sets of natural numbers. For these circuits, the equivalence problem is studied, i.\,e.\ the problem of deciding whether two given circuits compute the same set or not. It is shown that, depending on the allowed types of gates, this problem is complete for several different complexity classes and can thus be seen as a parametrized) representative for all those classes. KW - Mehrkriterielle Optimierung KW - Approximationsalgorithmus KW - Travelling-salesman-Problem KW - Boolesche Grammatik KW - Theoretische Informatik KW - Komplexitätstheorie KW - Boolean Grammar Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70146 ER - TY - THES A1 - Staehle, Barbara T1 - Modeling and Optimization Methods for Wireless Sensor and Mesh Networks T1 - Modellierungs- und Optimierungs-Methoden für drahtlose Sensor- und Mesh-Netze N2 - Im Internet der Zukunft werden Menschen nicht nur mit Menschen, sondern auch mit „Dingen“, und sogar „Dinge“ mit „Dingen“ kommunizieren. Zusätzlich wird das Bedürfnis steigen, immer und überall Zugang zum Internet zu haben. Folglich gewinnen drahtlose Sensornetze (WSNs) und drahtlose Mesh-Netze (WMNs) an Bedeutung, da sie Daten über die Umwelt ins Internet liefern, beziehungsweise einfache Internet-Zugangsmöglichkeiten schaffen. In den vier Teilen dieser Arbeit werden unterschiedliche Modellierungs- und Optimierungsmethoden für WSNs und WMNs vorgestellt. Der Energieverbrauch ist die wichtigste Metrik, wenn es darum geht die Kommunikation in einem WSN zu optimieren. Da sich in der Literatur sehr viele unterschiedliche Energiemodelle finden, untersucht der erste Teil der Arbeit welchen Einfluss unterschiedliche Energiemodelle auf die Optimierung von WSNs haben. Aufbauend auf diesen Überlegungen beschäftigt sich der zweite Teil der Arbeit mit drei Problemen, die überwunden werden müssen um eine standardisierte energieeffiziente Kommunikations-Lösung für WSNs basierend auf IEEE 802.15.4 und ZigBee zu realisieren. Für WMNs sind beide Probleme von geringem Interesse, die Leistung des Netzes jedoch umso mehr. Der dritte Teil der Arbeit führt daher Algorithmen für die Berechnung des Max-Min fairen (MMF) Netzwerk-Durchsatzes in WMNs mit mehreren Linkraten und Internet-Gateways ein. Der letzte Teil der Arbeit untersucht die Auswirkungen des LRA-Konzeptes. Dessen grundlegende Idee ist die folgende. Falls für einen Link eine niedrigere Datenrate als theoretisch möglich verwendet wird, sinkt zwar der Link-Durchsatz, jedoch ist unter Umständen eine größere Anzahl von gleichzeitigen Übertragungen möglich und der Gesamt-Durchsatz des Netzes kann sich erhöhen. Mithilfe einer analytischen LRA Formulierung und einer systematischen Studie kann gezeigt werden, dass eine netzwerkweite Zuordnung robusterer Datenraten als nötig zu einer Erhöhung des MMF Netzwerk-Durchsatzes führt. Desweitern kann gezeigt werden, dass sich LRA positiv auf die Leistungsfähigkeit eines IEEE 802.11 WMNs auswirkt und für die Optimierung des Netzes genutzt werden kann. N2 - In the future Internet, the people-centric communication paradigm will be complemented by a ubiquitous communication among people and devices, or even a communication between devices. This comes along with the need for a more flexible, cheap, widely available Internet access. Two types of wireless networks are considered most appropriate for attaining those goals. While wireless sensor networks (WSNs) enhance the Internet’s reach by providing data about the properties of the environment, wireless mesh networks (WMNs) extend the Internet access possibilities beyond the wired backbone. This monograph contains four chapters which present modeling and optimization methods for WSNs and WMNs. Minimizing energy consumptions is the most important goal of WSN optimization and the literature consequently provides countless energy consumption models. The first part of the monograph studies to what extent the used energy consumption model influences the outcome of analytical WSN optimizations. These considerations enable the second contribution, namely overcoming the problems on the way to a standardized energy-efficient WSN communication stack based on IEEE 802.15.4 and ZigBee. For WMNs both problems are of minor interest whereas the network performance has a higher weight. The third part of the work, therefore, presents algorithms for calculating the max-min fair network throughput in WMNs with multiple link rates and Internet gateway. The last contribution of the monograph investigates the impact of the LRA concept which proposes to systematically assign more robust link rates than actually necessary, thereby allowing to exploit the trade-off between spatial reuse and per-link throughput. A systematical study shows that a network-wide slightly more conservative LRA than necessary increases the throughput of a WMN where max-min fairness is guaranteed. It moreover turns out that LRA is suitable for increasing the performance of a contention-based WMN and is a valuable optimization tool. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/11 KW - Drahtloses Sensorsystem KW - Drahtloses vermaschtes Netz KW - Modellierung KW - Optimierung KW - IEEE 802.11 KW - IEEE 802.15.4 KW - Energieeffizienz KW - Fairness KW - Linkratenanpassung KW - Energy efficiency KW - Fairness KW - Link rate adaptation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-64884 ER - TY - THES A1 - Schmidt, Marco T1 - Ground Station Networks for Efficient Operation of Distributed Small Satellite Systems T1 - Effizienter Betrieb von Verteilten Kleinsatelliten-Systemen mit Bodenstationsnetzwerken N2 - The field of small satellite formations and constellations attracted growing attention, based on recent advances in small satellite engineering. The utilization of distributed space systems allows the realization of innovative applications and will enable improved temporal and spatial resolution in observation scenarios. On the other side, this new paradigm imposes a variety of research challenges. In this monograph new networking concepts for space missions are presented, using networks of ground stations. The developed approaches combine ground station resources in a coordinated way to achieve more robust and efficient communication links. Within this thesis, the following topics were elaborated to improve the performance in distributed space missions: Appropriate scheduling of contact windows in a distributed ground system is a necessary process to avoid low utilization of ground stations. The theoretical basis for the novel concept of redundant scheduling was elaborated in detail. Additionally to the presented algorithm was a scheduling system implemented, its performance was tested extensively with real world scheduling problems. In the scope of data management, a system was developed which autonomously synchronizes data frames in ground station networks and uses this information to detect and correct transmission errors. The system was validated with hardware in the loop experiments, demonstrating the benefits of the developed approach. N2 - Satellitenformationen und Konstellationen rücken immer mehr in den Fokus aktueller Forschung, ausgelöst durch die jüngsten Fortschritte in der Kleinsatelliten-Entwicklung. Der Einsatz von verteilten Weltraumsystemen ermöglicht die Realisierung von innovativen Anwendungen auf Basis von hoher zeitlicher und räumlicher Auflösung in Observationsszenarien. Allerdings bringt dieses neue Paradigma der Raumfahrttechnik auch Herausforderungen in verschiedenen Forschungsfeldern mit sich. In dieser Dissertation werden neue Netzwerk-Konzepte für Raumfahrtmissionen unter Einsatz von Bodenstationnetzwerken vorgestellt. Die präsentierten Verfahren koordinieren verfügbare Bodenstationsressourcen um einen robusten und effizienten Kommunikationslink zu ermöglichen. In dieser Arbeit werden dabei folgende Themenfelder behandelt um die Performance in verteilten Raumfahrtmissionen zu steigern: Das Verteilen von Kontaktfenster (sogenanntes Scheduling) in verteilten Bodenstationssystem ist ein notwendiger Prozess um eine niedrige Auslastung der Stationen zu vermeiden. Die theoretische Grundlage für das Konzept des redundanten Scheduling wurde erarbeitet. Zusätztlich wurde das Verfahren in Form eines Scheduling Systems implementiert und dessen Performance ausführlich an real-world Szenarien getestet. Im Rahmen des Themenfeldes Data Management wurde ein System entwickelt, welches autonom Datenframes in Bodenstationsnetzwerken synchronisieren kann. Die in den Datenframes enthaltene Information wird genutzt um Übertragungsfehler zu erkennen und zu korrigieren. Das System wurde mit Hardware-in-the-loop Experimenten validiert und die Vorteile des entwickelten Verfahrens wurden gezeigt. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 6 KW - Kleinsatellit KW - Bodenstation KW - Verteiltes System KW - Scheduling KW - Ground Station Networks KW - Small Satellites KW - Distributed Space Systems Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-64999 SN - 978-3-923959-77-8 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - A Rule-based Statistical Classifier for Determining a Base Text and Ranking Witnesses In Textual Documents Collation Process N2 - Given a collection of diverging documents about some lost original text, any person interested in the text would try reconstructing it from the diverging documents. Whether it is eclecticism, stemmatics, or copy-text, one is expected to explicitly or indirectly select one of the documents as a starting point or as a base text, which could be emended through comparison with remaining documents, so that a text that could be designated as the original document is generated. Unfortunately the process of giving priority to one of the documents also known as witnesses is a subjective approach. In fact even Cladistics, which could be considered as a computer-based approach of implementing stemmatics, does not present or recommend users to select a certain witness as a starting point for the process of reconstructing the original document. In this study, a computational method using a rule-based Bayesian classifier is used, to assist text scholars in their attempts of reconstructing a non-existing document from some available witnesses. The method developed in this study consists of selecting a base text successively and collating it with remaining documents. Each completed collation cycle stores the selected base text and its closest witness, along with a weighted score of their similarities and differences. At the end of the collation process, a witness selected more often by majority of base texts is considered as the probable base text of the collection. Witnesses’ scores are weighted using a weighting system, based on effects of types of textual modifications on the process of reconstructing original documents. Users have the possibility to select between baseless and base text collation. If a base text is selected, the task is reduced to ranking the witnesses with respect to the base text, otherwise a base text as well as ranking of the witnesses with respect to the base text are computed and displayed on a histogram. KW - Textvergleich KW - Text Mining KW - Gothenburg Modell KW - Bayes-Klassifikator KW - Textual document collation KW - Base text KW - Gothenburg model KW - Bayesian classifier KW - Textual alterations weighting system Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57465 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Assisting Understanding, Retention, and Dissemination of Religious Texts Knowledge with Modeling, and Visualization Techniques: The Case of The Quran N2 - Learning a book in general involves reading it, underlining important words, adding comments, summarizing some passages, and marking up some text or concepts. Once deeper understanding is achieved, one would like to organize and manage her/his knowledge in such a way that, it could be easily remembered and efficiently transmitted to others. In this paper, books organized in terms of chapters consisting of verses, are considered as the source of knowledge to be modeled. The knowledge model consists of verses with their metadata and semantic annotations. The metadata represent the multiple perspectives of knowledge modeling. Verses with their metadata and annotations form a meta-model, which will be published on a web Mashup. The meta-model with linking between its elements constitute a knowledge base. An XML-based annotation system breaking down the learning process into specific tasks, helps constructing the desired meta-model. The system is made up of user interfaces for creating metadata, annotating chapters’ contents according to user selected semantics, and templates for publishing the generated knowledge on the Internet. The proposed software system improves comprehension and retention of knowledge contained in religious texts through modeling and visualization. The system has been applied to the Quran, and the result obtained shows that multiple perspectives of information modeling can be successfully applied to religious texts. It is expected that this short ongoing study would motivate others to engage in devising and offering software systems for cross-religions learning. KW - Wissensmanagement KW - Koran KW - Knowledge Modeling KW - Meta-model KW - Knowledge Management KW - Content Management KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55927 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Design and Implementation of Architectures for Interactive Textual Documents Collation Systems N2 - One of the main purposes of textual documents collation is to identify a base text or closest witness to the base text, by analyzing and interpreting differences also known as types of changes that might exist between those documents. Based on this fact, it is reasonable to argue that, explicit identification of types of changes such as deletions, additions, transpositions, and mutations should be part of the collation process. The identification could be carried out by an interpretation module after alignment has taken place. Unfortunately existing collation software such as CollateX1 and Juxta2’s collation engine do not have interpretation modules. In fact they implement the Gothenburg model [1] for collation process which does not include an interpretation unit. Currently both CollateX and Juxta’s collation engine do not distinguish in their critical apparatus between the types of changes, and do not offer statistics about those changes. This paper presents a model for both integrated and distributed collation processes that improves the Gothenburg model. The model introduces an interpretation component for computing and distinguishing between the types of changes that documents could have undergone. Moreover two architectures implementing the model in order to solve the problem of interactive collation are discussed as well. Each architecture uses CollateX library, and provides on the one hand preprocessing functions for transforming input documents into CollateX input format, and on the other hand a post-processing module for enabling interactive collation. Finally simple algorithms for distinguishing between types of changes, and linking collated source documents with the collation results are also introduced. KW - Softwarearchitektur KW - Textvergleich KW - service based software architecture KW - service brokerage KW - interactive collation of textual variants KW - Gothenburg model of collation process Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56601 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Assisting Analysis and Understanding of Quran Search Results with Interactive Scatter Plots and Tables N2 - The Quran is the holy book of Islam consisting of 6236 verses divided into 114 chapters called suras. Many verses are similar and even identical. Searching for similar texts (e.g verses) could return thousands of verses, that when displayed completely or partly as textual list would make analysis and understanding difficult and confusing. Moreover it would be visually impossible to instantly figure out the overall distribution of the retrieved verses in the Quran. As consequence reading and analyzing the verses would be tedious and unintuitive. In this study a combination of interactive scatter plots and tables has been developed to assist analysis and understanding of the search result. Retrieved verses are clustered by chapters, and a weight is assigned to each cluster according to number of verses it contains, so that users could visually identify most relevant areas, and figure out the places of revelation of the verses. Users visualize the complete result and can select a region of the plot to zoom in, click on a marker to display a table containing verses with English translation side by side. KW - Text Mining KW - Visualisierung KW - Koran KW - Information Visualization KW - Visual Text Mining KW - Scatter Plot KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55840 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - A Knowledge-based Hybrid Statistical Classifier for Reconstructing the Chronology of the Quran N2 - Computationally categorizing Quran’s chapters has been mainly confined to the determination of chapters’ revelation places. However this broad classification is not sufficient to effectively and thoroughly understand and interpret the Quran. The chronology of revelation would not only improve comprehending the philosophy of Islam, but also the easiness of implementing and memorizing its laws and recommendations. This paper attempts estimating possible chapters’ dates of revelation through their lexical frequency profiles. A hybrid statistical classifier consisting of stemming and clustering algorithms for comparing lexical frequency profiles of chapters, and deriving dates of revelation has been developed. The classifier is trained using some chapters with known dates of revelation. Then it classifies chapters with uncertain dates of revelation by computing their proximity to the training ones. The results reported here indicate that the proposed methodology yields usable results in estimating dates of revelation of the Quran’s chapters based on their lexical contents. KW - Text Mining KW - Maschinelles Lernen KW - text categorization KW - Bayesian classifier KW - distance-based classifier KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-54712 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Using Machine Learning Algorithms for Categorizing Quranic Chaptersby Major Phases of Prophet Mohammad’s Messengership N2 - This paper discusses the categorization of Quranic chapters by major phases of Prophet Mohammad’s messengership using machine learning algorithms. First, the chapters were categorized by places of revelation using Support Vector Machine and naïve Bayesian classifiers separately, and their results were compared to each other, as well as to the existing traditional Islamic and western orientalists classifications. The chapters were categorized into Meccan (revealed in Mecca) and Medinan (revealed in Medina). After that, chapters of each category were clustered using a kind of fuzzy-single linkage clustering approach, in order to correspond to the major phases of Prophet Mohammad’s life. The major phases of the Prophet’s life were manually derived from the Quranic text, as well as from the secondary Islamic literature e.g hadiths, exegesis. Previous studies on computing the places of revelation of Quranic chapters relied heavily on features extracted from existing background knowledge of the chapters. For instance, it is known that Meccan chapters contain mostly verses about faith and related problems, while Medinan ones encompass verses dealing with social issues, battles…etc. These features are by themselves insufficient as a basis for assigning the chapters to their respective places of revelation. In fact, there are exceptions, since some chapters do contain both Meccan and Medinan features. In this study, features of each category were automatically created from very few chapters, whose places of revelation have been determined through identification of historical facts and events such as battles, migration to Medina…etc. Chapters having unanimously agreed places of revelation were used as the initial training set, while the remaining chapters formed the testing set. The classification process was made recursive by regularly augmenting the training set with correctly classified chapters, in order to classify the whole testing set. Each chapter was preprocessed by removing unimportant words, stemming, and representation with vector space model. The result of this study shows that, the two classifiers have produced useable results, with an outperformance of the support vector machine classifier. This study indicates that, the proposed methodology yields encouraging results for arranging Quranic chapters by phases of Prophet Mohammad’s messengership. KW - Koran KW - Maschinelles Lernen KW - Text categorization KW - Clustering KW - Support Vector Machine KW - Naïve Bayesian KW - Place of revelation KW - Stages of Prophet Mohammad’s messengership KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66862 ER - TY - THES A1 - Schlosser, Daniel T1 - Quality of Experience Management in Virtual Future Networks T1 - Netzwerkmanagement unter Berücksichtigung der vom Benutzer erfahrenen Dienstgüte in virtuellen zukünftigen Netzen N2 - Aktuell beobachten wir eine drastische Vervielfältigung der Dienste und Anwendungen, die das Internet für den Datentransport nutzen. Dabei unterscheiden sich die Anforderungen dieser Dienste an das Netzwerk deutlich. Das Netzwerkmanagement wird durch diese Diversität der nutzenden Dienste aber deutlich erschwert, da es einem Datentransportdienstleister kaum möglich ist, die unterschiedlichen Verbindungen zu unterscheiden, ohne den Inhalt der transportierten Daten zu analysieren. Netzwerkvirtualisierung ist eine vielversprechende Lösung für dieses Problem, da sie es ermöglicht für verschiedene Dienste unterschiedliche virtuelle Netze auf dem gleichen physikalischen Substrat zu betreiben. Diese Diensttrennung ermöglicht es, jedes einzelne Netz anwendungsspezifisch zu steuern. Ziel einer solchen Netzsteuerung ist es, sowohl die vom Nutzer erfahrene Dienstgüte als auch die Kosteneffizienz des Datentransports zu optimieren. Darüber hinaus wird es mit Netzwerkvirtualisierung möglich das physikalische Netz so weit zu abstrahieren, dass die aktuell fest verzahnten Rollen von Netzwerkbesitzer und Netzwerkbetreiber entkoppelt werden können. Darüber hinaus stellt Netzwerkvirtualisierung sicher, dass unterschiedliche Datennetze, die gleichzeitig auf dem gleichen physikalischen Netz betrieben werden, sich gegenseitig weder beeinflussen noch stören können. Diese Arbeit  beschäftigt sich mit ausgewählten Aspekten dieses Themenkomplexes und fokussiert sich darauf, ein virtuelles Netzwerk mit bestmöglicher Dienstqualität für den Nutzer zu betreiben und zu steuern. Dafür wird ein Top-down-Ansatz gewählt, der von den Anwendungsfällen, einer möglichen Netzwerkvirtualisierungs-Architektur und aktuellen Möglichkeiten der Hardwarevirtualisierung ausgeht. Im Weiteren fokussiert sich die Arbeit dann in Richtung Bestimmung und Optimierung der vom Nutzer erfahrenen Dienstqualität (QoE) auf Applikationsschicht und diskutiert Möglichkeiten zur Messung und Überwachung von wesentlichen Netzparametern in virtualisierten Netzen. N2 - Currently, we observe a strong growth of services and applications, which use the Internet for data transport. However, the network requirements of these applications differ significantly. This makes network management difficult, since it complicated to separate network flows into application classes without inspecting application layer data. Network virtualization is a promising solution to this problem. It enables running different virtual network on the same physical substrate. Separating networks based on the service supported within allows controlling each network according to the specific needs of the application. The aim of such a network control is to optimize the user perceived quality as well as the cost efficiency of the data transport. Furthermore, network virtualization abstracts the network functionality from the underlying implementation and facilitates the split of the currently tightly integrated roles of Internet Service Provider and network owner. Additionally, network virtualization guarantees that different virtual networks run on the same physical substrate do not interfere with each other. This thesis discusses different aspects of the network virtualization topic. It is focused on how to manage and control a virtual network to guarantee the best Quality of Experience for the user. Therefore, a top-down approach is chosen. Starting with use cases of virtual networks, a possible architecture is derived and current implementation options based on hardware virtualization are explored. In the following, this thesis focuses on assessing the Quality of Experience perceived by the user and how it can be optimized on application layer. Furthermore, options for measuring and monitoring significant network parameters of virtual networks are considered. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/12 KW - Netzwerkmanagement KW - Dienstgüte KW - Netzwerkvirtualisierung KW - QoS KW - QoE KW - Network Virtualization KW - Quality of Experience KW - Network Management KW - Quality of Service Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69986 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Computing Generic Causes of Revelation of the Quranic Verses Using Machine Learning Techniques N2 - Because many verses of the holy Quran are similar, there is high probability that, similar verses addressing same issues share same generic causes of revelation. In this study, machine learning techniques have been employed in order to automatically derive causes of revelation of Quranic verses. The derivation of the causes of revelation is viewed as a classification problem. Initially the categories are based on the verses with known causes of revelation, and the testing set consists of the remaining verses. Based on a computed threshold value, a naïve Bayesian classifier is used to categorize some verses. After that, using a decision tree classifier the remaining uncategorized verses are separated into verses that contain indicators (resultative connectors, causative expressions…), and those that do not. As for those verses having indicators, each one is segmented into its constituent clauses by identification of the linking indicators. Then a dominant clause is extracted and considered either as the cause of revelation, or post-processed by adding or subtracting some terms to form a causal clause that constitutes the cause of revelation. Concerning remaining unclassified verses without indicators, a naive Bayesian classifier is again used to assign each one of them to one of the existing classes based on features and topics similarity. As for verses that could not be classified so far, manual classification was made by considering each verse as a category on its own. The result obtained in this study is encouraging, and shows that automatic derivation of Quranic verses’ generic causes of revelation is achievable, and reasonably reliable for understanding and implementing the teachings of the Quran. KW - Text Mining KW - Koran KW - Text mining KW - Statistical classifiers KW - Text segmentation KW - Causes of revelation KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66083 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Design and Implementation of a Model-driven XML-based Integrated System Architecture for Assisting Analysis, Understanding, and Retention of Religious Texts:The Case of The Quran N2 - Learning a book in general involves reading it, underlining important words, adding comments, summarizing some passages, and marking up some text or concepts. Once deeper understanding is achieved, one would like to organize and manage her/his knowledge in such a way that, it could be easily remembered and efficiently transmitted to others. This paper discusses about modeling religious texts using semantic XML markup based on frame-based knowledge representation, with the purpose of assisting understanding, retention, and sharing of knowledge they contain. In this study, books organized in terms of chapters made up of verses are considered as the source of knowledge to model. Some metadata representing the multiple perspectives of knowledge modeling are assigned to each chapter and verse. Chapters and verses with their metadata form a meta-model, which is represented using frames, and published on a web mashup. An XML-based annotation and visualization system equipped with user interfaces for creating static and dynamic metadata, annotating chapters’ contents according to user selected semantics, and templates for publishing generated knowledge on the Internet, has been developed. The system has been applied to the Quran, and the result obtained shows that multiple perspectives of information modeling can be successfully applied to religious texts, in order to support analysis, understanding, and retention of the texts. KW - Wissensrepräsentation KW - Wissensmanagement KW - Content Management KW - XML KW - Koran KW - Knowledge representation KW - Meta-model KW - Frames KW - XML model KW - Knowledge Management KW - Content Management KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65737 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Computer-based Textual Documents Collation System for Reconstructing the Original Text from Automatically Identified Base Text and Ranked Witnesses N2 - Given a collection of diverging documents about some lost original text, any person interested in the text would try reconstructing it from the diverging documents. Whether it is eclecticism, stemmatics, or copy-text, one is expected to explicitly or indirectly select one of the documents as a starting point or as a base text, which could be emended through comparison with remaining documents, so that a text that could be designated as the original document is generated. Unfortunately the process of giving priority to one of the documents also known as witnesses is a subjective approach. In fact even Cladistics, which could be considered as a computer-based approach of implementing stemmatics, does not present or recommend users to select a certain witness as a starting point for the process of reconstructing the original document. In this study, a computational method using a rule-based Bayesian classifier is used, to assist text scholars in their attempts of reconstructing a non-existing document from some available witnesses. The method developed in this study consists of selecting a base text successively and collating it with remaining documents. Each completed collation cycle stores the selected base text and its closest witness, along with a weighted score of their similarities and differences. At the end of the collation process, a witness selected more often by majority of base texts is considered as the probable base text of the collection. Witnesses’ scores are weighted using a weighting system, based on effects of types of textual modifications on the process of reconstructing original documents. Users have the possibility to select between baseless and base text collation. If a base text is selected, the task is reduced to ranking the witnesses with respect to the base text, otherwise a base text as well as ranking of the witnesses with respect to the base text are computed and displayed on a bar diagram. Additionally this study includes a recursive algorithm for automatically reconstructing the original text from the identified base text and ranked witnesses. KW - Textvergleich KW - Text Mining KW - Textual document collation KW - Base text KW - Reconstruction of original text KW - Gothenburg model KW - Bayesian classifier KW - Textual alterations weighting system Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65749 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Philosophical and Computational Approaches for Estimating and Visualizing Months of Revelations of Quranic Chapters N2 - The question of why the Quran structure does not follow its chronology of revelation is a recurring one. Some Islamic scholars such as [1] have answered the question using hadiths, as well as other philosophical reasons based on internal evidences of the Quran itself. Unfortunately till today many are still wondering about this issue. Muslims believe that the Quran is a summary and a copy of the content of a preserved tablet called Lawhul-Mahfuz located in the heaven. Logically speaking, this suggests that the arrangement of the verses and chapters is expected to be similar to that of the Lawhul-Mahfuz. As for the arrangement of the verses in each chapter, there is unanimity that it was carried out by the Prophet himself under the guidance of Angel Gabriel with the recommendation of God. But concerning the ordering of the chapters, there are reports about some divergences [3] among the Prophet’s companions as to which chapter should precede which one. This paper argues that Quranic chapters might have been arranged according to months and seasons of revelation. In fact, based on some verses of the Quran, it is defendable that the Lawhul-Mahfuz itself is understood to have been structured in terms of the months of the year. In this study, philosophical and mathematical arguments for computing chapters’ months of revelation are discussed, and the result is displayed on an interactive scatter plot. KW - Text Mining KW - Visualisierung KW - Koran KW - Text mining KW - Visualization KW - Chronology of revelation KW - Chapters arrangement KW - Quran KW - Lawhul-Mahfuz Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65784 ER - TY - THES A1 - Selbach, Stefan T1 - Hybride bitparallele Volltextsuche T1 - Hybrid Bit-parallel Full-text Search N2 - Der große Vorteil eines q-Gramm Indexes liegt darin, dass es möglich ist beliebige Zeichenketten in einer Dokumentensammlung zu suchen. Ein Nachteil jedoch liegt darin, dass bei größer werdenden Datenmengen dieser Index dazu neigt, sehr groß zu werden, was mit einem deutlichem Leistungsabfall verbunden ist. In dieser Arbeit wird eine neuartige Technik vorgestellt, die die Leistung eines q-Gramm Indexes mithilfe zusätzlicher M-Matrizen für jedes q-Gramm und durch die Kombination mit einem invertierten Index erhöht. Eine M-Matrix ist eine Bit-Matrix, die Informationen über die Positionen eines q-Gramms enthält. Auch bei der Kombination von zwei oder mehreren Q-Grammen bieten diese M-Matrizen Informationen über die Positionen der Kombination. Dies kann verwendet werden, um die Komplexität der Zusammenführung der q-Gramm Trefferlisten für eine gegebene Suchanfrage zu reduzieren und verbessert die Leistung des n-Gramm-invertierten Index. Die Kombination mit einem termbasierten invertierten Index beschleunigt die durchschnittliche Suchzeit zusätzlich und vereint die Vorteile beider Index-Formate. Redundante Informationen werden in dem q-Gramm Index reduziert und weitere Funktionalität hinzugefügt, wie z.B. die Bewertung von Treffern nach Relevanz, die Möglichkeit, nach Konzepten zu suchen oder Indexpartitionierungen nach Wichtigkeit der enthaltenen Terme zu erstellen. N2 - The major advantage of the n-gram inverted index is the possibility to locate any given substring in a document collection. Nevertheless, the n-gram inverted index also has its drawbacks: If the collections are getting bigger, this index tends to be very large and the performance drops significantly. A novel technique is proposed to enhance the performance of an n-gram inverted index by using additional m-matrixes for each n-gram and by combining it with an inverted index. An m-matrix is a bit matrix containing information about the positions of an n-gram. When combining two or more n-grams, these m-matrixes provide information about the positions of the combination. This can be used to reduce the complexity of merging the n-gram postings lists for a given search and improves the performance of the n-gram inverted index. The combination with a term based inverted index speeds up the average search time even more and combines the benefits of both index formats. Redundant information is reduced in the n-gram index and further functionality is added like the ranking of hits, the possibility to search for concepts and to create index partitions according to the relevance of the contained terms. KW - Information Retrieval KW - Information-Retrieval-System KW - Suchverfahren KW - Invertierte Liste KW - n-Gramm KW - q-Gramm KW - Volltextsuche KW - Bit Parallelität KW - Konzeptsuche KW - q-gram KW - n-gram KW - bit-parallel KW - full-text search KW - concept search Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66476 ER - TY - JOUR A1 - Mandel, Alexander A1 - Hörnlein, Alexander A1 - Ifland, Marianus A1 - Lüneburg, Edeltraud A1 - Deckert, Jürgen A1 - Puppe, Frank T1 - Aufwandsanalyse für computerunterstützte Multiple-Choice Papierklausuren T1 - Cost analysis for computer supported multiple-choice paper examinations JF - GMS Journal for Medical Education N2 - Introduction: Multiple-choice-examinations are still fundamental for assessment in medical degree programs. In addition to content related research, the optimization of the technical procedure is an important question. Medical examiners face three options: paper-based examinations with or without computer support or completely electronic examinations. Critical aspects are the effort for formatting, the logistic effort during the actual examination, quality, promptness and effort of the correction, the time for making the documents available for inspection by the students, and the statistical analysis of the examination results. Methods: Since three semesters a computer program for input and formatting of MC-questions in medical and other paper-based examinations is used and continuously improved at Wuerzburg University. In the winter semester (WS) 2009/10 eleven, in the summer semester (SS) 2010 twelve and in WS 2010/11 thirteen medical examinations were accomplished with the program and automatically evaluated. For the last two semesters the remaining manual workload was recorded. Results: The cost of the formatting and the subsequent analysis including adjustments of the analysis of an average examination with about 140 participants and about 35 questions was 5-7 hours for exams without complications in the winter semester 2009/2010, about 2 hours in SS 2010 and about 1.5 hours in the winter semester 2010/11. Including exams with complications, the average time was about 3 hours per exam in SS 2010 and 2.67 hours for the WS 10/11. Discussion: For conventional multiple-choice exams the computer-based formatting and evaluation of paper-based exams offers a significant time reduction for lecturers in comparison with the manual correction of paper-based exams and compared to purely electronically conducted exams it needs a much simpler technological infrastructure and fewer staff during the exam." N2 - Einleitung: Multiple-Choice-Klausuren spielen immer noch eine herausragende Rolle für fakultätsinterne medizinische Prüfungen. Neben inhaltlichen Arbeiten stellt sich die Frage, wie die technische Abwicklung optimiert werden kann. Für Dozenten in der Medizin gibt es zunehmend drei Optionen zur Durchführung von MC-Klausuren: Papierklausuren mit oder ohne Computerunterstützung oder vollständig elektronische Klausuren. Kritische Faktoren sind der Aufwand für die Formatierung der Klausur, der logistische Aufwand bei der Klausurdurchführung, die Qualität, Schnelligkeit und der Aufwand der Klausurkorrektur, die Bereitstellung der Dokumente für die Einsichtnahme, und die statistische Analyse der Klausurergebnisse. Methoden: An der Universität Würzburg wird seit drei Semestern ein Computerprogramm zur Eingabe und Formatierung der MC-Fragen in medizinischen und anderen Papierklausuren verwendet und optimiert, mit dem im Wintersemester (WS) 2009/2010 elf, im Sommersemester (SS) 2010 zwölf und im WS 2010/11 dreizehn medizinische Klausuren erstellt und anschließend die eingescannten Antwortblätter automatisch ausgewertet wurden. In den letzten beiden Semestern wurden die Aufwände protokolliert. Ergebnisse: Der Aufwand der Formatierung und der Auswertung einschl. nachträglicher Anpassung der Auswertung einer Durchschnittsklausur mit ca. 140 Teilnehmern und ca. 35 Fragen ist von 5-7 Stunden für Klausuren ohne Komplikation im WS 2009/2010 über ca. 2 Stunden im SS 2010 auf ca. 1,5 Stunden im WS 2010/11 gefallen. Einschließlich der Klausuren mit Komplikationen bei der Auswertung betrug die durchschnittliche Zeit im SS 2010 ca. 3 Stunden und im WS 10/11 ca. 2,67 Stunden pro Klausur. Diskussion: Für konventionelle Multiple-Choice-Klausuren bietet die computergestützte Formatierung und Auswertung von Papierklausuren einen beträchtlichen Zeitvorteil für die Dozenten im Vergleich zur manuellen Korrektur von Papierklausuren und benötigt im Vergleich zu rein elektronischen Klausuren eine deutlich einfachere technische Infrastruktur und weniger Personal bei der Klausurdurchführung. KW - Multiple-Choice Prüfungen KW - Automatisierte Prüfungskorrektur KW - Aufwandsanalyse KW - Educational Measurement (I2.399) KW - Self-Evaluation Programs (I2.399.780) KW - Multiple-Choice Examination KW - Cost Analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134386 VL - 28 IS - 4 ER - TY - THES A1 - Baunach, Marcel T1 - Advances in Distributed Real-Time Sensor/Actuator Systems Operation - Operating Systems, Communication, and Application Design Concepts - T1 - Fortschritte im Betrieb drahtloser Sensor/Aktuator Netzwerke N2 - This work takes a close look at several quite different research areas related to the design of networked embedded sensor/actuator systems. The variety of the topics illustrates the potential complexity of current sensor network applications; especially when enriched with actuators for proactivity and environmental interaction. Besides their conception, development, installation and long-term operation, we'll mainly focus on more "low-level" aspects: Compositional hardware and software design, task cooperation and collaboration, memory management, and real-time operation will be addressed from a local node perspective. In contrast, inter-node synchronization, communication, as well as sensor data acquisition, aggregation, and fusion will be discussed from a rather global network view. The diversity in the concepts was intentionally accepted to finally facilitate the reliable implementation of truly complex systems. In particular, these should go beyond the usual "sense and transmit of sensor data", but show how powerful today's networked sensor/actuator systems can be despite of their low computational performance and constrained hardware: If their resources are only coordinated efficiently! N2 - Diese Arbeit behandelt einige sehr unterschiedliche Forschungsbereiche bezüglich des Designs vernetzter und eingebetteter Sensor/Aktuator-Systeme. Die Vielfalt der Themen zeigt die potenzielle Komplexität aktueller Sensornetzwerk-Anwendungen, insbesondere wenn sie mit Aktuatoren zur Interaktion mit der Umwelt ausgestattet sind. Neben deren Konzeption, Entwicklung, Installation und dem langfristigen Betrieb wird besonders auf diverse "low-level" Aspekte eingegangen: Kompositionelles Hardware- und Software-Design, Task Kooperation und Kollaboration, Speicher-Verwaltung und Echtzeit-Betrieb werden aus lokaler Sicht der Sensorknoten betrachtet. Im Kontrast werden Knoten-Synchronisation, Kommunikation, sowie Sensordatenerfassung, -aggregation und -fusion aus globaler Netzwerk-Sicht diskutiert. Die Vielfalt der behandelten Konzepte wurde bewusst in Kauf genommen, um letztlich die zuverlässige Umsetzung sehr komplexer Systeme zu erleichtern. Insbesondere sollte dies über das übliche "Erfassen und Übertragen von Sensordaten" hinausgehen, und zeigen, wie mächtig heutige vernetzte Sensor/Aktuator-Systeme trotz ihrer geringen Rechenleistung und eingeschränkten Hardware sein können: Wenn ihre Ressourcen effizient koordiniert werden! KW - Eingebettetes System KW - Drahtloses Sensorsystem KW - Echtzeitsystem KW - Dynamische Speicherverwaltung KW - Ressourcenallokation KW - Fernwartung KW - Betriebssystem KW - Verteiltes System KW - Lokalisation KW - Embedded Systems KW - Real-Time Operating Systems KW - Localization KW - Wireless Sensor/Actuator Systems KW - Dynamic Memory Management Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76489 ER - TY - THES A1 - Dang, Nghia Duc T1 - Konzeption und Evaluation eines hybriden, skalierbaren Werkzeugs zur mechatronischen Systemdiagnose am Beispiel eines Diagnosesystems für freie Kfz-Werkstätten T1 - Conception and evaluation of a hybrid, scalable tool for mechatronical system diagnosis on the example of a diagnostic system for independent car repair shops N2 - Die Entwicklung eines wissensbasierten Systems, speziell eines Diagnosesystems, ist eine Teildisziplin der künstlichen Intelligenz und angewandten Informatik. Im Laufe der Forschung auf diesem Gebiet wurden verschiedene Lösungsansätze mit unterschiedlichem Erfolg bei der Anwendung in der Kraftfahrzeugdiagnose entwickelt. Diagnosesysteme in Vertragswerkstätten, das heißt in Fahrzeughersteller gebundenen Werkstätten, wenden hauptsächlich die fallbasierte Diagnostik an. Zum einen hält sich hier die Fahrzeugvielfalt in Grenzen und zum anderen besteht eine Meldepflicht bei neuen, nicht im System vorhandenen Fällen. Die freien Werkstätten verfügen nicht über eine solche Datenbank. Somit ist der fallbasierte Ansatz schwer umsetzbar. In freien Werkstätten - Fahrzeughersteller unabhängigen Werkstätten - basiert die Fehlersuche hauptsächlich auf Fehlerbäumen. Wegen der wachsenden Fahrzeugkomplexität, welche wesentlich durch die stark zunehmende Anzahl der durch mechatronische Systeme realisierten Funktionen bedingt ist, und der steigenden Typenvielfalt ist die geführte Fehlersuche in freien Werkstätten nicht immer zielführend. Um die Unterstützung des Personals von freien Werkstätten bei der zukünftigen Fehlersuche zu gewährleisten, werden neue Generationen von herstellerunabhängigen Diagnosetools benötigt, die die Probleme der Variantenvielfalt und Komplexität lösen. In der vorliegenden Arbeit wird ein Lösungsansatz vorgestellt, der einen qualitativen, modellbasierten Diagnoseansatz mit einem auf heuristischem Diagnosewissen basierenden Ansatz vereint. Neben der Grundlage zur Wissenserhebung werden in dieser Arbeit die theoretische Grundlage zur Beherrschung der Variantenvielfalt sowie die Tests für die erstellten Diagnosemodelle behandelt. Die Diagnose ist symptombasiert und die Inferenzmechanismen zur Verarbeitung des Diagnosewissens sind eine Kombination aus Propagierung der abweichenden physikalischen Größen im Modell und der Auswertung des heuristischen Wissens. Des Weiteren werden in dieser Arbeit verschiedene Aspekte der Realisierung der entwickelten theoretischen Grundlagen dargestellt, zum Beispiel: Systemarchitektur, Wissenserhebungsprozess, Ablauf des Diagnosevorgangs in den Werkstätten. Die Evaluierung der entwickelten Lösung bei der Wissenserhebung in Form von Modellerstellungen und Modellierungsworkshops sowie Feldtests dient nicht nur zur Bestätigung des entwickelten Ansatzes, sondern auch zur Ideenfindung für die Integration der entwickelten Tools in die existierende IT-Infrastruktur. N2 - The development of a knowledge-based system - in particular a diagnostic system - is a branch of artificial intelligence and applied computer science. Throughout the research in this field, various approaches have been developed with varying degrees of success in the application in automotive diagnostics. Diagnostic systems in authorized garages i.e. in garages bound to vehicle manufacturers mainly apply case-based diagnosis. In those cases first the variance of vehicles is limited and second there is a reporting obligation of new, yet not existing cases within the system. The independent repair shops do not have such a database. Thus, the case-based approach is difficult to implement. In independent garages - car manufacturer independent garages - the troubleshooting is mainly based on fault trees. Because of the growing complexity of vehicles, which is mainly due to the rapidly increasing number of functions realized by mechatronic systems and the increasing variety of vehicle types, guided troubleshooting for independent garages is not always productive. To ensure the support of the staff of independent garages in the future troubleshooting, new generations of multivendor diagnostic tools are needed to solve the problems of the variety and complexity. In the present paper an approach is presented which combines a qualitative, model-based diagnostic approach to a heuristic diagnostic knowledge-based approach. In addition to the basis for knowledge collection in this study the theoretical basis for the control of the variety and the tests for the generated diagnosis models are discussed. The diagnosis is symptom-based and the inference mechanisms for processing of diagnostic knowledge are a combination of propagation of the different physical parameters in the model and the evaluation of heuristic knowledge. Furthermore, various aspects of the implementation of the developed theoretical basis are presented in this thesis, for example: system architecture, knowledge collection process, the course of action of the diagnostic process in the workshops. The evaluation of the developed solution for the collection of knowledge in the form of preparation of models and modeling workshops, as well as field tests not only serves to validate the developed approach, but also to find ideas for the integration of the developed tools into the existing IT infrastructure. KW - Diagnosesystem KW - Künstliche Intelligenz KW - Modellbasierte Diagnose KW - Werkstattdiagnose KW - hybride Diagnose KW - skalierbare Diagnose KW - Inferenz KW - Angewandte Informatik KW - aftermarket diagnostic KW - model-base diagnosis KW - hybrid Diagnostic Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70774 ER - TY - THES A1 - Zinner, Thomas T1 - Performance Modeling of QoE-Aware Multipath Video Transmission in the Future Internet T1 - Leistungsmodellierung einer Mehrpfad Video Übertragung im zukünftigen Internet unter Berücksichtigung der QoE N2 - Internet applications are becoming more and more flexible to support diverge user demands and network conditions. This is reflected by technical concepts, which provide new adaptation mechanisms to allow fine grained adjustment of the application quality and the corresponding bandwidth requirements. For the case of video streaming, the scalable video codec H.264/SVC allows the flexible adaptation of frame rate, video resolution and image quality with respect to the available network resources. In order to guarantee a good user-perceived quality (Quality of Experience, QoE) it is necessary to adjust and optimize the video quality accurately. But not only have the applications of the current Internet changed. Within network and transport, new technologies evolved during the last years providing a more flexible and efficient usage of data transport and network resources. One of the most promising technologies is Network Virtualization (NV) which is seen as an enabler to overcome the ossification of the Internet stack. It provides means to simultaneously operate multiple logical networks which allow for example application-specific addressing, naming and routing, or their individual resource management. New transport mechanisms like multipath transmission on the network and transport layer aim at an efficient usage of available transport resources. However, the simultaneous transmission of data via heterogeneous transport paths and communication technologies inevitably introduces packet reordering. Additional mechanisms and buffers are required to restore the correct packet order and thus to prevent a disturbance of the data transport. A proper buffer dimensioning as well as the classification of the impact of varying path characteristics like bandwidth and delay require appropriate evaluation methods. Additionally, for a path selection mechanism real time evaluation mechanisms are needed. A better application-network interaction and the corresponding exchange of information enable an efficient adaptation of the application to the network conditions and vice versa. This PhD thesis analyzes a video streaming architecture utilizing multipath transmission and scalable video coding and develops the following optimization possibilities and results: Analysis and dimensioning methods for multipath transmission, quantification of the adaptation possibilities to the current network conditions with respect to the QoE for H.264/SVC, and evaluation and optimization of a future video streaming architecture, which allows a better interaction of application and network. N2 - Die Applikationen im Internet passen sich immer besser an unterschiedliche Anforderungen der Nutzer und variierende Netzwerkbedingungen an. Neue Mechanismen ermöglichen die zielgerichtete Anpassung der Anwendungsqualität und damit der benötigten Bandbreite. Im Falle von Videostreaming ermöglicht der skalierbare Videocodec H.264/SVC, die flexible Veränderung der Bildwiederholungsrate, der Auflösung des Videos und der Bildqualität an die vorhandenen Ressourcen im Netzwerk. Um eine gute vom Nutzer erfahrene Dienstgüte (Quality of Experience, QoE) zu garantieren, muss die Videoqualität richtig angepasst und optimiert werden. Aber nicht nur die Anwendungen des heutigen Internets haben sich verändert. Gerade in den letzten Jahren entstanden neue Netzwerk- und Transporttechnologien, welche eine flexiblere und effizientere Nutzung der Kommunikationsnetze erlauben. Eine dieser Techniken ist die Virtualisierung von Netzwerken. Sie erlaubt es auf einem gemeinsamen physikalischen Netz verschiedene logische Netze zu betreiben, die zum Beispiel Anwendungs-abhängige Adressierung unterstützen, eigene Namensgebung erlauben oder ein individuelles Ressourcen Management ermöglichen. Neuartige Transportmechanismen wie Mehrpfadübertragung auf Netzwerk- und Transportebene des ISO/OSI Stacks streben eine effiziente Ausnutzung der zur Verfügung stehenden Übertragungsmöglichkeiten an. Doch die simultane Übertragung von Daten über heterogene Kommunikationspfade und –technologien führt unausweichlich zu einer Veränderung der Reihenfolge, in der die Pakete ankommen. Es werden zusätzliche Mechanismen und Puffer benötigt, um die ursprüngliche Paketreihenfolge wieder herzustellen und so einen störenden Einfluss auf den Datentransport zu verhindern. Die richtige Dimensionierung dieser Puffer sowie die Klassifizierung des Einflusses von variierenden Pfadparametern wie Bandbreite und Verzögerungen setzen passende Evaluierungsmethoden voraus. Darüber hinaus werden für die Auswahl von geeigneten Pfaden aus einer Menge vorhandener Pfade echtzeitfähige Bewertungsmechanismen benötigt. Eine bessere Interaktion zwischen Applikationen und Netzwerk und der damit verbundene Informationsaustausch ermöglicht die effiziente Anpassung der Applikationsqualität an das Netzwerk und umgekehrt. Diese Doktorarbeit analysiert eine auf Mehrpfadübertragung und skalierbarer Videokodierung basierende Videostreaming Architektur und erarbeitet die folgenden Optimierungsmöglichkeiten und Auswertungen: Analyse- und Dimensionierungsmethoden für Mehrpfadübertragung, Quantifizierung der Anpassungsmöglichkeiten von SVC an das Netzwerk unter Berücksichtigung der QoE und Evaluierung und Optimierung einer zukünftigen Videostreaming Architektur, welche eine stärkere Interaktion zwischen Applikation und Netzwerk ermöglicht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/12 KW - Videoübertragung KW - H.264 SVC KW - Modellierung KW - Quality-of-Experience KW - Mehrpfadübertragung KW - Multipath Transmission KW - Video Streaming KW - H.264/SVC KW - QoE KW - Performance Modeling Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72324 ER - TY - THES A1 - Schröter, Martin T1 - Newton Methods for Image Registration T1 - Newton-Methoden zur Bildregistrierung N2 - Consider the situation where two or more images are taken from the same object. After taking the first image, the object is moved or rotated so that the second recording depicts it in a different manner. Additionally, take heed of the possibility that the imaging techniques may have also been changed. One of the main problems in image processing is to determine the spatial relation between such images. The corresponding process of finding the spatial alignment is called “registration”. In this work, we study the optimization problem which corresponds to the registration task. Especially, we exploit the Lie group structure of the set of transformations to construct efficient, intrinsic algorithms. We also apply the algorithms to medical registration tasks. However, the methods developed are not restricted to the field of medical image processing. We also have a closer look at more general forms of optimization problems and show connections to related tasks. N2 - Wir betrachten Problemstellungen, in denen zwei Bilder von ein und demselben Objekt aufgenommen wurden. Nach der ersten Aufnahme hat sich allerdings das Objekt bewegt oder deformiert, so dass es sich in den nächsten Bildern auf eine andere Weise darstellt. Zudem kann sich die Aufnahmetechnik geändert haben. Eine der Hauptprobleme in der Bildverarbeitung ist es, die räumliche Korrespondenz zwischen solchen Bildern zu bestimmen. Die zugehörige Aufgabe, eine solche räumliche Übereinstimmung zu finden, nennt man "Registrierung". In dieser Arbeit untersuchen wir das mit der Registrierung verbundene Optimierungsproblem. Insbesondere nutzen wir die Lie-Gruppen-Struktur der Menge der zulässigen Transformationen aus, um effiziente, intrinsische Argorithmen zu entwickeln. Wir wenden diese dann auf Probleme der medizinischen Bildregistrierung an, jedoch sind unsere Methoden nicht auf dieses Feld beschränkt. Wir werfen auch einen genaueren Blick auf eine allgemeinere Form von Optimierungsproblemen und zeigen Verknüpfungen zu verwandten Fragestellungen auf. KW - Newton-Verfahren KW - Registrierung KW - Stochastische Optimierung KW - Newton Methods KW - Image Registration KW - Stochastic Algorithms KW - Optimization on Lie Groups Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71490 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Towards a Knowledge-Based Learning System for The Quranic Text N2 - In this research, an attempt to create a knowledge-based learning system for the Quranic text has been performed. The knowledge base is made up of the Quranic text along with detailed information about each chapter and verse, and some rules. The system offers the possibility to study the Quran through web-based interfaces, implementing novel visualization techniques for browsing, querying, consulting, and testing the acquired knowledge. Additionally the system possesses knowledge acquisition facilities for maintaining the knowledge base. KW - Wissensbanksystem KW - Wissensmanagement KW - Text Mining KW - Visualisierung KW - Koran KW - Knowledge-based System KW - Knowledge Management System KW - Text Mining KW - Visualization KW - Quran Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70003 ER - TY - THES A1 - Duelli, Michael T1 - Heuristic Design and Provisioning of Resilient Multi-Layer Networks T1 - Heuristische Planung und Betrieb von ausfallsicheren Mehrschichtnetzen N2 - To jointly provide different services/technologies, like IP and Ethernet or IP and SDH/SONET, in a single network, equipment of multiple technologies needs to be deployed to the sites/Points of Presence (PoP) and interconnected with each other. Therein, a technology may provide transport functionality to other technologies and increase the number of available resources by using multiplexing techniques. By providing its own switching functionality, each technology creates connections in a logical layer which leads to the notion of multi-layer networks. The design of such networks comprises the deployment and interconnection of components to suit to given traffic demands. To prevent traffic loss due to failures of networking equipment, protection mechanisms need to be established. In multi-layer networks, protection usually can be applied in any of the considered layers. In turn, the hierarchical structure of multi-layer networks also bears shared risk groups (SRG). To achieve a cost-optimal resilient network, an appropriate combination of multiplexing techniques, technologies, and their interconnections needs to be found. Thus, network design is a combinatorial problem with a large parameter and solution space. After the design stage, the resources of a multi-layer network can be provided to traffic demands. Especially, dynamic capacity provisioning requires interaction of sites and layers, as well as accurate retrieval of constraint information. In recent years, generalized multiprotocol label switching (GMPLS) and path computation elements (PCE) have emerged as possible approaches for these challenges. Like the design, the provisioning of multi-layer networks comprises a variety of optimization parameters, like blocking probability, resilience, and energy efficiency. In this work, we introduce several efficient heuristics to approach the considered optimization problems. We perform capital expenditure (CAPEX)-aware design of multi-layer networks from scratch, based on IST NOBEL phase 2 project's cost and equipment data. We comprise traffic and resilience requirements in different and multiple layers as well as different network architectures. On top of the designed networks, we consider the dynamic provisioning of multi-layer traffic based on the GMPLS and PCE architecture. We evaluate different PCE deployments, information retrieval strategies, and re-optimization. Finally, we show how information about provisioning utilization can be used to provide a feedback for network design. N2 - Um in einem Netz verschiedene Dienste/Schichten, z.B. IP und Ethernet oder IP und SDH/SONET, parallel anbieten zu können, müssen Komponenten mehrerer Technologien an den Standorten verbaut und miteinander verbunden werden. Hierbei kann eine Technologie eine Transportschicht für andere Technologien fungieren und die Zahl der verfügbaren Ressourcen durch Multiplex Techniken erhöhen. Durch die Bereitstellung eigener Switching Funktionalität erzeugt jede Technologie Verbindungen in einer logischen Schicht. Dies führt zu der Bezeichnung Mehrschichtnetz (engl. multi-layer network). Die Planung solcher Netze hat das Verbauen und Verbinden von Komponenten zum Ziel, so dass gegebene Verkehrsströme realisiert werden können. Um Unterbrechungen der Verkehrsströme aufgrund von Fehlern in den Netzkomponenten zu verhinden, müssen Schutzmechanismen eingebaut werden. In Mehrschichtnetzen können solche Schutzmechanismen in jeder beliebigen Schicht betrachtet werden. Allerdings birgt die hierarchische Struktur von Mehrschichtnetzen das Risiko von shared risk groups (SRG). Um ein Kosten-optimales ausfallsicheres Netz zu erhalten, muss eine passende Kombination aus Multiplex Techniken, Technologien und deren Verbindungen gefunden werden. Die Netzplanung ist daher ein kombinatorisches Problem mit einem großen Parameter- und Lösungsraum. Nach der Planungsphase können die Ressourcen eines Mehrschichtnetzes für Verkehrsströme vorgehalten werden. Die Betrachtung von dynamischer Kapazitätsanforderungen erfordert die Interaktion von Knoten und Schichten sowie akkurate Gewinnung von Informationen zur Auslastung. In jüngster Zeit sind das Generalized Multiprotocol Label Switching (GMPLS) und das Path Computation Element (PCE) als mögliche Lösungsansätze für diese Herausforderungen entstanden. Wie in der Planung beinhaltet auch der Betrieb von Mehrschichtnetzen eine Vielzahl von Optimierungsparametern, wie die Blockierungswahrscheinlichkeit, Ausfallsicherheit und Energie-Effizienz. In dieser Arbeit, führen wir verschiedene effiziente Heuristiken ein, um die betrachteten Optimierungsprobleme anzugehen. Wir planen Mehrschichtnetze von Grund auf und minimieren hinsichtlich der Anschaffungskosten basierend auf den Kosten- und Komponenten-Daten des IST NOBEL Phase 2 Projekts. Wir berücksichtigen Anforderungen der Verkehrsströme und Ausfallsicherheit in verschiedenen Schichten und in mehreren Schichten gleichzeitig sowie verschiedene Netzarchitekturen. Aufsetzend auf dem geplanten Netz betrachten wir den Betrieb von Mehrschichtnetzen mit dynamischen Verkehr basiert auf der GMPLS und PCE Architektur. Wir bewerten verschiedene PCE Installationen, Strategien zur Informationsgewinnung und Re-Optimierung. Abschließend, zeigen wir wie Information über die Auslastung im Betrieb genutzt werden kann um Rückmeldung an die Netzplanung zu geben. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/12 KW - Mehrschichtsystem KW - Planung KW - Ressourcenmanagement KW - Ausfallsicheres System KW - Mehrschichtnetze KW - Pfadberechnungselement KW - Ausfallsicherheit KW - Multi-Layer KW - Design KW - Resilience KW - Resource Management KW - Path Computation Element Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69433 ER - TY - JOUR A1 - Zirkel, J. A1 - Cecil, A. A1 - Schäfer, F. A1 - Rahlfs, S. A1 - Ouedraogo, A. A1 - Xiao, K. A1 - Sawadogo, S. A1 - Coulibaly, B. A1 - Becker, K. A1 - Dandekar, T. T1 - Analyzing Thiol-Dependent Redox Networks in the Presence of Methylene Blue and Other Antimalarial Agents with RT-PCR-Supported in silico Modeling JF - Bioinformatics and Biology Insights N2 - BACKGROUND: In the face of growing resistance in malaria parasites to drugs, pharmacological combination therapies are important. There is accumulating evidence that methylene blue (MB) is an effective drug against malaria. Here we explore the biological effects of both MB alone and in combination therapy using modeling and experimental data. RESULTS: We built a model of the central metabolic pathways in P. falciparum. Metabolic flux modes and their changes under MB were calculated by integrating experimental data (RT-PCR data on mRNAs for redox enzymes) as constraints and results from the YANA software package for metabolic pathway calculations. Several different lines of MB attack on Plasmodium redox defense were identified by analysis of the network effects. Next, chloroquine resistance based on pfmdr/and pfcrt transporters, as well as pyrimethamine/sulfadoxine resistance (by mutations in DHF/DHPS), were modeled in silico. Further modeling shows that MB has a favorable synergism on antimalarial network effects with these commonly used antimalarial drugs. CONCLUSIONS: Theoretical and experimental results support that methylene blue should, because of its resistance-breaking potential, be further tested as a key component in drug combination therapy efforts in holoendemic areas. KW - methylene blue KW - malaria KW - elementary mode analysis KW - drug KW - resistance KW - combination therapy KW - pathway KW - metabolic flux Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123751 N1 - This is an open access article. Unrestricted non-commercial use is permitted provided the original work is properly cited. VL - 6 ER - TY - JOUR A1 - Krueger, Beate A1 - Friedrich, Torben A1 - Förster, Frank A1 - Bernhardt, Jörg A1 - Gross, Roy A1 - Dandekar, Thomas T1 - Different evolutionary modifications as a guide to rewire two-component systems JF - Bioinformatics and Biology Insights N2 - Two-component systems (TCS) are short signalling pathways generally occurring in prokaryotes. They frequently regulate prokaryotic stimulus responses and thus are also of interest for engineering in biotechnology and synthetic biology. The aim of this study is to better understand and describe rewiring of TCS while investigating different evolutionary scenarios. Based on large-scale screens of TCS in different organisms, this study gives detailed data, concrete alignments, and structure analysis on three general modification scenarios, where TCS were rewired for new responses and functions: (i) exchanges in the sequence within single TCS domains, (ii) exchange of whole TCS domains; (iii) addition of new components modulating TCS function. As a result, the replacement of stimulus and promotor cassettes to rewire TCS is well defined exploiting the alignments given here. The diverged TCS examples are non-trivial and the design is challenging. Designed connector proteins may also be useful to modify TCS in selected cases. KW - histidine kinase KW - connector KW - Mycoplasma KW - engineering KW - promoter KW - sensor KW - response regulator KW - synthetic biology KW - sequence alignment Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123647 N1 - This is an open access article. Unrestricted non-commercial use is permitted provided the original work is properly cited. VL - 6 ER - TY - JOUR A1 - Merget, Benjamin A1 - Koetschan, Christian A1 - Hackl, Thomas A1 - Förster, Frank A1 - Dandekar, Thomas A1 - Müller, Tobias A1 - Schultz, Jörg A1 - Wolf, Matthias T1 - The ITS2 Database JF - Journal of Visual Expression N2 - The internal transcribed spacer 2 (ITS2) has been used as a phylogenetic marker for more than two decades. As ITS2 research mainly focused on the very variable ITS2 sequence, it confined this marker to low-level phylogenetics only. However, the combination of the ITS2 sequence and its highly conserved secondary structure improves the phylogenetic resolution1 and allows phylogenetic inference at multiple taxonomic ranks, including species delimitation. The ITS2 Database presents an exhaustive dataset of internal transcribed spacer 2 sequences from NCBI GenBank accurately reannotated. Following an annotation by profile Hidden Markov Models (HMMs), the secondary structure of each sequence is predicted. First, it is tested whether a minimum energy based fold (direct fold) results in a correct, four helix conformation. If this is not the case, the structure is predicted by homology modeling. In homology modeling, an already known secondary structure is transferred to another ITS2 sequence, whose secondary structure was not able to fold correctly in a direct fold. The ITS2 Database is not only a database for storage and retrieval of ITS2 sequence-structures. It also provides several tools to process your own ITS2 sequences, including annotation, structural prediction, motif detection and BLAST search on the combined sequence-structure information. Moreover, it integrates trimmed versions of 4SALE and ProfDistS for multiple sequence-structure alignment calculation and Neighbor Joining tree reconstruction. Together they form a coherent analysis pipeline from an initial set of sequences to a phylogeny based on sequence and secondary structure. In a nutshell, this workbench simplifies first phylogenetic analyses to only a few mouse-clicks, while additionally providing tools and data for comprehensive large-scale analyses. KW - homology modeling KW - molecular systematics KW - internal transcribed spacer 2 KW - alignment KW - genetics KW - secondary structure KW - ribosomal RNA KW - phylogenetic tree KW - phylogeny Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-124600 VL - 61 IS - e3806 ER - TY - JOUR A1 - Buchin, Kevin A1 - Buchin, Maike A1 - Byrka, Jaroslaw A1 - Nöllenburg, Martin A1 - Okamoto, Yoshio A1 - Silveira, Rodrigo I. A1 - Wolff, Alexander T1 - Drawing (Complete) Binary Tanglegrams JF - Algorithmica N2 - A binary tanglegram is a drawing of a pair of rooted binary trees whose leaf sets are in one-to-one correspondence; matching leaves are connected by inter-tree edges. For applications, for example, in phylogenetics, it is essential that both trees are drawn without edge crossings and that the inter-tree edges have as few crossings as possible. It is known that finding a tanglegram with the minimum number of crossings is NP-hard and that the problem is fixed-parameter tractable with respect to that number. We prove that under the Unique Games Conjecture there is no constant-factor approximation for binary trees. We show that the problem is NP-hard even if both trees are complete binary trees. For this case we give an O(n 3)-time 2-approximation and a new, simple fixed-parameter algorithm. We show that the maximization version of the dual problem for binary trees can be reduced to a version of MaxCut for which the algorithm of Goemans and Williamson yields a 0.878-approximation. KW - NP-hardness KW - crossing minimization KW - binary tanglegram KW - approximation algorithm KW - fixed-parameter tractability Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-124622 VL - 62 ER - TY - JOUR A1 - Staiger, Christine A1 - Cadot, Sidney A1 - Kooter, Raul A1 - Dittrich, Marcus A1 - Müller, Tobias A1 - Klau, Gunnar W. A1 - Wessels, Lodewyk F. A. T1 - A Critical Evaluation of Network and Pathway-Based Classifiers for Outcome Prediction in Breast Cancer JF - PLoS One N2 - Recently, several classifiers that combine primary tumor data, like gene expression data, and secondary data sources, such as protein-protein interaction networks, have been proposed for predicting outcome in breast cancer. In these approaches, new composite features are typically constructed by aggregating the expression levels of several genes. The secondary data sources are employed to guide this aggregation. Although many studies claim that these approaches improve classification performance over single genes classifiers, the gain in performance is difficult to assess. This stems mainly from the fact that different breast cancer data sets and validation procedures are employed to assess the performance. Here we address these issues by employing a large cohort of six breast cancer data sets as benchmark set and by performing an unbiased evaluation of the classification accuracies of the different approaches. Contrary to previous claims, we find that composite feature classifiers do not outperform simple single genes classifiers. We investigate the effect of (1) the number of selected features; (2) the specific gene set from which features are selected; (3) the size of the training set and (4) the heterogeneity of the data set on the performance of composite feature and single genes classifiers. Strikingly, we find that randomization of secondary data sources, which destroys all biological information in these sources, does not result in a deterioration in performance of composite feature classifiers. Finally, we show that when a proper correction for gene set size is performed, the stability of single genes sets is similar to the stability of composite feature sets. Based on these results there is currently no reason to prefer prognostic classifiers based on composite features over single genes classifiers for predicting outcome in breast cancer. KW - modules KW - protein-interaction networks KW - expression signature KW - classification KW - set KW - metastasis KW - stability KW - survival KW - database KW - markers Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131323 VL - 7 IS - 4 ER - TY - JOUR A1 - Naseem, Muhammad A1 - Dandekar, Thomas T1 - The Role of Auxin-Cytokinin Antagonism in Plant-Pathogen Interactions JF - PLOS Pathogens N2 - No abstract available. KW - disease KW - pseudomas-syringae KW - arabidpsis thaliana KW - immunity KW - organogenesis KW - transcription KW - resistance KW - crosstalk Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131901 VL - 8 IS - 11 ER - TY - JOUR A1 - Schokraie, Elham A1 - Warnken, Uwe A1 - Hotz-Wagenblatt, Agnes A1 - Grohme, Markus A. A1 - Hengherr, Steffen A1 - Förster, Frank A1 - Schill, Ralph O. A1 - Frohme, Marcus A1 - Dandekar, Thomas A1 - Schnölzer, Martina T1 - Comparative proteome analysis of Milnesium tardigradum in early embryonic state versus adults in active and anhydrobiotic state JF - PLoS One N2 - Tardigrades have fascinated researchers for more than 300 years because of their extraordinary capability to undergo cryptobiosis and survive extreme environmental conditions. However, the survival mechanisms of tardigrades are still poorly understood mainly due to the absence of detailed knowledge about the proteome and genome of these organisms. Our study was intended to provide a basis for the functional characterization of expressed proteins in different states of tardigrades. High-throughput, high-accuracy proteomics in combination with a newly developed tardigrade specific protein database resulted in the identification of more than 3000 proteins in three different states: early embryonic state and adult animals in active and anhydrobiotic state. This comprehensive proteome resource includes protein families such as chaperones, antioxidants, ribosomal proteins, cytoskeletal proteins, transporters, protein channels, nutrient reservoirs, and developmental proteins. A comparative analysis of protein families in the different states was performed by calculating the exponentially modified protein abundance index which classifies proteins in major and minor components. This is the first step to analyzing the proteins involved in early embryonic development, and furthermore proteins which might play an important role in the transition into the anhydrobiotic state. KW - life-span regulation KW - genes KW - Yolk protein KW - water stress KW - expression KW - tolerance KW - richtersius coronifer KW - superoxide-dismutase KW - caenorhabditis elegans KW - arabidopsis thaliana KW - vitellogenin Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134447 VL - 7 IS - 9 ER - TY - JOUR A1 - Buga, Ana-Maria A1 - Scholz, Claus Jürgen A1 - Kumar, Senthil A1 - Herndon, James G. A1 - Alexandru, Dragos A1 - Cojocaru, Gabriel Radu A1 - Dandekar, Thomas A1 - Popa-Wagner, Aurel T1 - Identification of New Therapeutic Targets by Genome-Wide Analysis of Gene Expression in the Ipsilateral Cortex of Aged Rats after Stroke JF - PLoS One N2 - Background: Because most human stroke victims are elderly, studies of experimental stroke in the aged rather than the young rat model may be optimal for identifying clinically relevant cellular responses, as well for pinpointing beneficial interventions. Methodology/Principal Findings: We employed the Affymetrix platform to analyze the whole-gene transcriptome following temporary ligation of the middle cerebral artery in aged and young rats. The correspondence, heat map, and dendrogram analyses independently suggest a differential, age-group-specific behaviour of major gene clusters after stroke. Overall, the pattern of gene expression strongly suggests that the response of the aged rat brain is qualitatively rather than quantitatively different from the young, i.e. the total number of regulated genes is comparable in the two age groups, but the aged rats had great difficulty in mounting a timely response to stroke. Our study indicates that four genes related to neuropathic syndrome, stress, anxiety disorders and depression (Acvr1c, Cort, Htr2b and Pnoc) may have impaired response to stroke in aged rats. New therapeutic options in aged rats may also include Calcrl, Cyp11b1, Prcp, Cebpa, Cfd, Gpnmb, Fcgr2b, Fcgr3a, Tnfrsf26, Adam 17 and Mmp14. An unexpected target is the enzyme 3-hydroxy-3-methylglutaryl-Coenzyme A synthase 1 in aged rats, a key enzyme in the cholesterol synthesis pathway. Post-stroke axonal growth was compromised in both age groups. Conclusion/Significance: We suggest that a multi-stage, multimodal treatment in aged animals may be more likely to produce positive results. Such a therapeutic approach should be focused on tissue restoration but should also address other aspects of patient post-stroke therapy such as neuropathic syndrome, stress, anxiety disorders, depression, neurotransmission and blood pressure. KW - gamma KW - corticotropin-releasing hormone KW - colony-stimulating factor KW - cerebral ischemia KW - receptor KW - brain KW - protein KW - inhibitor KW - mouse KW - differentiation Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-130657 VL - 7 IS - 12 ER - TY - JOUR A1 - Böhler, Elmar A1 - Creignou, Nadia A1 - Galota, Matthias A1 - Reith, Steffen A1 - Schnoor, Henning A1 - Vollmer, Heribert T1 - Complexity Classifications for Different Equivalence and Audit Problems for Boolean Circuits JF - Logical Methods in Computer Science N2 - We study Boolean circuits as a representation of Boolean functions and conskier different equivalence, audit, and enumeration problems. For a number of restricted sets of gate types (bases) we obtain efficient algorithms, while for all other gate types we show these problems are at least NP-hard. KW - hierarchy KW - satisfiability problems Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131121 VL - 8 IS - 3:27 SP - 1 EP - 25 ER - TY - JOUR A1 - Atienza, Nieves A1 - de Castro, Natalia A1 - Cortés, Carmen A1 - Garrido, M. Ángeles A1 - Grima, Clara I. A1 - Hernández, Gregorio A1 - Márquez, Alberto A1 - Moreno-González, Auxiliadora A1 - Nöllenburg, Martin A1 - Portillo, José Ramón A1 - Reyes, Pedro A1 - Valenzuela, Jesús A1 - Trinidad Villar, Maria A1 - Wolff, Alexander T1 - Cover contact graphs N2 - We study problems that arise in the context of covering certain geometric objects called seeds (e.g., points or disks) by a set of other geometric objects called cover (e.g., a set of disks or homothetic triangles). We insist that the interiors of the seeds and the cover elements are pairwise disjoint, respectively, but they can touch. We call the contact graph of a cover a cover contact graph (CCG). We are interested in three types of tasks, both in the general case and in the special case of seeds on a line: (a) deciding whether a given seed set has a connected CCG, (b) deciding whether a given graph has a realization as a CCG on a given seed set, and (c) bounding the sizes of certain classes of CCG’s. Concerning (a) we give efficient algorithms for the case that seeds are points and show that the problem becomes hard if seeds and covers are disks. Concerning (b) we show that this problem is hard even for point seeds and disk covers (given a fixed correspondence between graph vertices and seeds). Concerning (c) we obtain upper and lower bounds on the number of CCG’s for point seeds. KW - Informatik Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78845 ER - TY - JOUR A1 - Wolff, Alexander A1 - Rutter, Iganz T1 - Augmenting the Connectivity of Planar and Geometric Graphs JF - Journal of Graph Algorithms and Applications N2 - In this paper we study connectivity augmentation problems. Given a connected graph G with some desirable property, we want to make G 2-vertex connected (or 2-edge connected) by adding edges such that the resulting graph keeps the property. The aim is to add as few edges as possible. The property that we consider is planarity, both in an abstract graph-theoretic and in a geometric setting, where vertices correspond to points in the plane and edges to straight-line segments. We show that it is NP-hard to � nd a minimum-cardinality augmentation that makes a planar graph 2-edge connected. For making a planar graph 2-vertex connected this was known. We further show that both problems are hard in the geometric setting, even when restricted to trees. The problems remain hard for higher degrees of connectivity. On the other hand we give polynomial-time algorithms for the special case of convex geometric graphs. We also study the following related problem. Given a planar (plane geometric) graph G, two vertices s and t of G, and an integer c, how many edges have to be added to G such that G is still planar (plane geometric) and contains c edge- (or vertex-) disjoint s{t paths? For the planar case we give a linear-time algorithm for c = 2. For the plane geometric case we give optimal worst-case bounds for c = 2; for c = 3 we characterize the cases that have a solution. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-97587 ER - TY - JOUR A1 - Hurtienne, Jörn T1 - Inter-coder reliability of categorising force-dynamic events in human-technology interaction N2 - Two studies are reported that investigate how readily accessible and applicable ten force-dynamic categories are to novices in describing short episodes of human-technology interaction (Study 1) and that establish a measure of inter-coder reliability when re-classifying these episodes into force-dynamic categories (Study 2). The results of the first study show that people can easily and confidently relate their experiences with technology to the definitions of force-dynamic events (e.g. “The driver released the handbrake” as an example of restraint removal). The results of the second study show moderate agreement between four expert coders across all ten force-dynamic categories (Cohen’s kappa = .59) when re-classifying these episodes. Agreement values for single force-dynamic categories ranged between ‘fair’ and ‘almost perfect’, i.e. between kappa = .30 and .95. Agreement with the originally intended classifications of study 1 was higher than the pure inter-coder reliabilities. Single coders achieved an average kappa of .71, indicating substantial agreement. Using more than one coder increased kappas to almost perfect: up to .87 for four coders. A qualitative analysis of the predicted versus the observed number of category confusions revealed that about half of the category disagreement could be predicted from strong overlaps in the definitions of force-dynamic categories. From the quantitative and qualitative results, guidelines are derived to aid the better training of coders in order to increase inter-coder reliability. KW - inter-coder reliability KW - force dynamics KW - image schemas KW - humantechnology interaction Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-194127 SN - 2197-2796 SN - 2197-2788 N1 - This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively. VL - 1 IS - 1 ER - TY - THES A1 - Lehrieder, Frank T1 - Performance Evaluation and Optimization of Content Distribution using Overlay Networks T1 - Leistungsbewertung und Optimierung von Overlay Netzwerken zum Verteilen großer Datenmengen N2 - The work presents a performance evaluation and optimization of so-called overlay networks for content distribution in the Internet. Chapter 1 describes the importance which have such networks in today's Internet, for example, for the transmission of video content. The focus of this work is on overlay networks based on the peer-to-peer principle. These are characterized by the fact that users who download content, also contribute to the distribution process by sharing parts of the data to other users. This enables efficient content distribution because each user not only consumes resources in the system, but also provides its own resources. Chapter 2 of the monograph contains a detailed description of the functionality of today's most popular overlay network BitTorrent. It explains the various components and their interaction. This is followed by an illustration of why such overlay networks for Internet service providers (ISPs) are problematic. The reason lies in the large amount of inter-ISP traffic that is produced by these overlay networks. Since this inter-ISP traffic leads to high costs for ISPs, they try to reduce it by improved mechanisms for overlay networks. One optimization approach is the use of topology awareness within the overlay networks. It provides users of the overlay networks with information about the underlying physical network topology. This allows them to avoid inter-ISP traffic by exchanging data preferrentially with other users that are connected to the same ISP. Another approach to save inter-ISP traffic is caching. In this case the ISP provides additional computers in its network, called caches, which store copies of popular content. The users of this ISP can then obtain such content from the cache. This prevents that the content must be retrieved from locations outside of the ISP's network, and saves costly inter-ISP traffic in this way. In the third chapter of the thesis, the results of a comprehensive measurement study of overlay networks, which can be found in today's Internet, are presented. After a short description of the measurement methodology, the results of the measurements are described. These results contain data on a variety of characteristics of current P2P overlay networks in the Internet. These include the popularity of content, i.e., how many users are interested in specific content, the evolution of the popularity and the size of the files. The distribution of users within the Internet is investigated in detail. Special attention is given to the number of users that exchange a particular file within the same ISP. On the basis of these measurement results, an estimation of the traffic savings that can achieved by topology awareness is derived. This new estimation is of scientific and practical importance, since it is not limited to individual ISPs and files, but considers the whole Internet and the total amount of data exchanged in overlay networks. Finally, the characteristics of regional content are considered, in which the popularity is limited to certain parts of the Internet. This is for example the case of videos in German, Italian or French language. Chapter 4 of the thesis is devoted to the optimization of overlay networks for content distribution through caching. It presents a deterministic flow model that describes the influence of caches. On the basis of this model, it derives an estimate of the inter-ISP traffic that is generated by an overlay network, and which part can be saved by caches. The results show that the influence of the cache depends on the structure of the overlay networks, and that caches can also lead to an increase in inter-ISP traffic under certain circumstances. The described model is thus an important tool for ISPs to decide for which overlay networks caches are useful and to dimension them. Chapter 5 summarizes the content of the work and emphasizes the importance of the findings. In addition, it explains how the findings can be applied to the optimization of future overlay networks. Special attention is given to the growing importance of video-on-demand and real-time video transmissions. N2 - Die Arbeit beschäftigt sich mit der Leistungsbewertung und Optimierung von sogenannten Overlay-Netzwerken zum Verteilen von großen Datenmengen im Internet. Im Kapitel 1 der Arbeit wird die große Bedeutung erläutert, die solche Netzwerke im heutigen Internet haben, beispielsweise für die Übertragung von Video-Inhalten. Im Fokus der Arbeit liegen Overlay-Netzwerke, die auf dem Peer-to-peer Prinzip basieren. Diese zeichnen sich dadurch aus, dass Nutzer, die Inhalte herunterladen, auch gleichzeitig an dem Verteilprozess teilnehmen, indem sie Teile der Daten an andere Nutzer weitergeben. Dies ermöglicht eine effiziente Verteilung der Daten, weil jeder Nutzer nicht nur Ressourcen im System belegt, sondern auch eigene Ressourcen einbringt. Kapitel 2 der Arbeit enthält eine detaillierte Beschreibung der Funktionsweise des heute populärsten Overlay-Netzwerks BitTorrent. Es werden die einzelnen Komponenten erläutert und deren Zusammenspiel erklärt. Darauf folgt eine Darstellung, warum solche Overlay-Netzwerke für Internet-Anbieter (Internet service provider, ISP) problematisch sind. Der Grund dafür liegt in der großen Menge an Inter-ISP Verkehr, den diese Overlays erzeugen. Da solcher Inter-ISP Verkehr zu hohen Kosten für ISPs führt, versuchen diese den Inter-ISP Verkehr zu reduzieren, indem sie die Mechanismen der Overlay-Netzwerke optimieren. Ein Ansatz zur Optimierung ist die Verwendung von Topologiebewusstsein innerhalb der Overlay-Netzwerke. Dabei erhalten die Nutzer der Overlay-Netzwerke Informationen über die zugrunde liegende, physikalische Netzwerktopologie. Diese ermöglichen es ihnen, Inter-ISP Verkehr zu vermeiden, indem sie Daten bevorzugt mit anderen Nutzern austauschen, die mit dem gleichen ISP verbunden sind. Ein weiterer Ansatz, um Inter-ISP Verkehr einzusparen, ist Caching. Dabei stellt der ISP zusätzliche Rechner, sogenannte Caches, in seinem Netzwerk zur Verfügung, die Kopien populärer Inhalte zwischenspeichern. Die Nutzer dieses ISP können solche Inhalte nun von den Caches beziehen. Dies verhindert, dass populäre Inhalte mehrfach von außerhalb des betrachteten ISPs bezogen werden müssen, und spart so kostenintensiven Inter-ISP Verkehr ein. Im dritten Kapitel der Arbeit werden Ergebnisse einer umfassenden Messung von Overlay-Netzwerken vorgestellt, wie sie heute im Internet anzutreffen sind. Nach einer kurzen Darstellung der bei der Messung verwendeten Methodik werden die Resultate der Messungen beschrieben. Diese Ergebnisse enthalten Daten über eine Vielzahl von Eigenschaften von heutigen P2P-basierten Overlay-Netzwerken im Internet. Dazu zählen die Popularität von Inhalten, d.h., wie viele Nutzer an bestimmten Inhalten interessiert sind, die zeitliche Entwicklung der Popularität und die Größe der Daten. Im Detail wird auch die Verteilung der Nutzer über das Internet analysiert. Ein besonderes Augenmerk liegt dabei auf der Anzahl der Nutzer, die gleichzeitig und im Netz desselben ISP eine bestimmte Datei tauschen. Auf der Basis dieser Messergebnisse wird eine Abschätzung durchgeführt, welches Einsparpotential die Optimierung von Overlay-Netzwerken durch Topologiebewusstsein bietet. Diese neuartige Abschätzung ist von wissenschaftlicher und praktischer Bedeutung, da sie sich nicht auf einzelne ISPs und Dateien beschränkt, sondern des gesamte Internet und die Menge aller in Overlay-Netzwerken verfügbaren Dateien umfasst. Schließlich werden die Besonderheiten von regionalen Inhalten betrachtet, bei denen sich die Popularität auf bestimmte Teile des Internets beschränkt. Dies ist beispielsweise bei Videos in deutscher, italienischer oder französischer Sprache der Fall. Kapitel 4 der Arbeit widmet sich der Optimierung von Overlay-Netzwerken zum Verteilen großer Datenmengen durch Caching. Es wird ein deterministisches Flussmodel entwickelt, das den Einfluss von Caches beschreibt. Auf der Basis dieses Modells leitet er eine Abschätzung des Inter-ISP Verkehrs ab, der von einem Overlay-Netzwerk erzeugt wird, und welcher Teil davon durch Caches eingespart werden kann. Die Ergebnisse zeigen, dass der Einfluss von Caches von der Struktur der Overlay-Netzwerke abhängt und dass Caches unter bestimmten Umständen auch zu einem erhöhten Inter-ISP Verkehr führen können. Das beschriebene Modell ist somit ein wichtiges Hilfsmittel für ISPs um zu entscheiden, für welche Overlay-Netzwerke Caches sinnvoll sind, und um diese anschließend richtig zu dimensionieren. Kapitel 5 fasst den Inhalt der Arbeit zusammen und stellt die Bedeutung der gewonnenen Erkenntnisse heraus. Abschließend wird erläutert, in welcher Weise die in der Arbeit beschriebenen Ergebnisse wichtige Grundlagen für die Optimierung von zukünftigen Overlay-Netzwerken darstellen werden. Dabei wird besonders auf die wachsende Bedeutung von Video-On-Demand und Echt-Zeit Video-Übertragungen eingegangen. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/13 KW - Leistungsbewertung KW - Verteiltes System KW - Overlay-Netz KW - Overlay Netzwerke KW - Overlay networks Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76018 ER - TY - JOUR A1 - Becker, Martin A1 - Caminiti, Saverio A1 - Fiorella, Donato A1 - Francis, Louise A1 - Gravino, Pietro A1 - Haklay, Mordechai (Muki) A1 - Hotho, Andreas A1 - Loreto, Virrorio A1 - Mueller, Juergen A1 - Ricchiuti, Ferdinando A1 - Servedio, Vito D. P. A1 - Sirbu, Alina A1 - Tria, Franesca T1 - Awareness and Learning in Participatory Noise Sensing JF - PLOS ONE N2 - The development of ICT infrastructures has facilitated the emergence of new paradigms for looking at society and the environment over the last few years. Participatory environmental sensing, i.e. directly involving citizens in environmental monitoring, is one example, which is hoped to encourage learning and enhance awareness of environmental issues. In this paper, an analysis of the behaviour of individuals involved in noise sensing is presented. Citizens have been involved in noise measuring activities through the WideNoise smartphone application. This application has been designed to record both objective (noise samples) and subjective (opinions, feelings) data. The application has been open to be used freely by anyone and has been widely employed worldwide. In addition, several test cases have been organised in European countries. Based on the information submitted by users, an analysis of emerging awareness and learning is performed. The data show that changes in the way the environment is perceived after repeated usage of the application do appear. Specifically, users learn how to recognise different noise levels they are exposed to. Additionally, the subjective data collected indicate an increased user involvement in time and a categorisation effect between pleasant and less pleasant environments. KW - exposure Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127675 SN - 1932-6203 VL - 8 IS - 12 ER - TY - JOUR A1 - Karl, Stefan A1 - Dandekar, Thomas T1 - Jimena: Efficient computing and system state identification for genetic regulatory networks JF - BMC Bioinformatics N2 - Background: Boolean networks capture switching behavior of many naturally occurring regulatory networks. For semi-quantitative modeling, interpolation between ON and OFF states is necessary. The high degree polynomial interpolation of Boolean genetic regulatory networks (GRNs) in cellular processes such as apoptosis or proliferation allows for the modeling of a wider range of node interactions than continuous activator-inhibitor models, but suffers from scaling problems for networks which contain nodes with more than ~10 inputs. Many GRNs from literature or new gene expression experiments exceed those limitations and a new approach was developed. Results: (i) As a part of our new GRN simulation framework Jimena we introduce and setup Boolean-tree-based data structures; (ii) corresponding algorithms greatly expedite the calculation of the polynomial interpolation in almost all cases, thereby expanding the range of networks which can be simulated by this model in reasonable time. (iii) Stable states for discrete models are efficiently counted and identified using binary decision diagrams. As application example, we show how system states can now be sampled efficiently in small up to large scale hormone disease networks (Arabidopsis thaliana development and immunity, pathogen Pseudomonas syringae and modulation by cytokinins and plant hormones). Conclusions: Jimena simulates currently available GRNs about 10-100 times faster than the previous implementation of the polynomial interpolation model and even greater gains are achieved for large scale-free networks. This speed-up also facilitates a much more thorough sampling of continuous state spaces which may lead to the identification of new stable states. Mutants of large networks can be constructed and analyzed very quickly enabling new insights into network robustness and behavior. KW - Boolean function KW - genetic regulatory network KW - interpolation KW - stable state KW - binary decision diagram KW - Boolean tree Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-128671 VL - 14 ER - TY - JOUR A1 - Gageik, Nils A1 - Strohmeier, Michael A1 - Montenegro, Sergio T1 - Waypoint flight parameter comparison of an autonomous UAV JF - International Journal of Artificial Intelligence & Applications (IJAIA) N2 - The present paper compares the effect of different waypoint parameters on the flight performance of a special autonomous indoor UAV (unmanned aerial vehicle) fusing ultrasonic, inertial, pressure and optical sensors for 3D positioning and controlling. The investigated parameters are the acceptance threshold for reaching a waypoint as well as the maximal waypoint step size or block size. The effect of these parameters on the flight time and accuracy of the flight path is investigated. Therefore the paper addresses how the acceptance threshold and step size influence the speed and accuracy of the autonomous flight and thus influence the performance of the presented autonomous quadrocopter under real indoor navigation circumstances. Furthermore the paper demonstrates a drawback of the standard potential field method for navigation of such autonomous quadrocopters and points to an improvement. KW - autonomous UAV KW - Quadrocopter KW - Quadrotor KW - waypoint parameter KW - navigation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96833 ER - TY - JOUR A1 - Gageik, Nils A1 - Strohmeier, Michael A1 - Montenegro, Sergio T1 - An Autonomous UAV with an Optical Flow Sensor for Positioning and Navigation JF - International Journal of Advanced Robotic Systems N2 - A procedure to control all six DOF (degrees of freedom) of a UAV (unmanned aerial vehicle) without an external reference system and to enable fully autonomous flight is presented here. For 2D positioning the principle of optical flow is used. Together with the output of height estimation, fusing ultrasonic, infrared and inertial and pressure sensor data, the 3D position of the UAV can be computed, controlled and steered. All data processing is done on the UAV. An external computer with a pathway planning interface is for commanding purposes only. The presented system is part of the AQopterI8 project, which aims to develop an autonomous flying quadrocopter for indoor application. The focus of this paper is 2D positioning using an optical flow sensor. As a result of the performed evaluation, it can be concluded that for position hold, the standard deviation of the position error is 10cm and after landing the position error is about 30cm. KW - Autonomous UAV KW - Quadrocopter KW - Quadrotor KW - Optical Flow KW - positioning KW - navigation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96368 ER - TY - THES A1 - Herrmann, Christian T1 - Robotic Motion Compensation for Applications in Radiation Oncology T1 - Robotergestützte Bewegungskompensation für Anwendungen in der Radioonkologie N2 - Aufgrund vieler Verbesserungen der Behandlungsmethoden im Laufe der letzten 60 Jahre, erlaubt die Strahlentherapie heutzutage präzise Behandlungen von statischen Tumoren. Jedoch birgt die Bestrahlung von sich bewegenden Tumoren noch große Herausforderungen in sich, da bewegliche Tumore oft den Behandlungsstrahl verlassen. Dabei reduziert sich die Strahlendosis im Tumor während sich diese im umliegenden gesunden Gewebe erhöht. Diese Forschungsarbeit zielt darauf ab, die Grenzen der Strahlentherapie zu erweitern, um präzise Behandlungen von beweglichen Tumoren zu ermöglichen. Der Fokus der Arbeit liegt auf der Erstellung eines Echtzeitsystems zur aktiven Kompensation von Tumorbewegungen durch robotergestützte Methoden. Während Behandlungen befinden sich Patienten auf einer Patientenliege, mit der statische Lagerungsfehler vor Beginn einer Behandlung korrigiert werden. Die in dieser Arbeit verwendete Patientenliege "HexaPOD" ist ein paralleler Manipulator mit sechs Freiheitsgraden, der große Lasten innerhalb eines eingeschränkten Arbeitsbereichs präzise positionieren kann. Obwohl der HexaPOD ursprünglich nicht für dynamische Anwendungen konzipiert wurde, wird dieser für eine dauerhafte Bewegungskompensation eingesetzt, in dem Patienten so bewegt werden, dass Tumore präzise im Zentralstrahl während der Dauer einer gesamten Behandlung verbleiben. Um ein echtzeitfähiges Kompensationssystem auf Basis des HexaPODs zu realisieren, muss eine Reihe an Herausforderungen bewältigt werden. Echtzeitaspekte werden einerseits durch die Verwendung eines harten Echtzeitbetriebssystems abgedeckt, andererseits durch die Messung und Schätzung von Latenzzeiten aller physikalischen Größen im System, z.B. Messungen der Tumor- und Atemposition. Neben der konsistenten und durchgängigen Berücksichtigung von akkuraten Zeitinformation, werden alle software-induzierten Latenzen adaptiv ausgeglichen. Dies erfordert Vorhersagen der Tumorposition in die nahe Zukunft. Zahlreiche Prädiktoren zur Atem- und Tumorpositionsvorhersage werden vorgeschlagen und anhand verschiedenster Metriken evaluiert. Erweiterungen der Prädiktionsalgorithmen werden eingeführt, die sowohl Atem- als auch Tumorpositionsinformationen fusionieren, um Vorhersagen ohne explizites Korrelationsmodell zu ermöglichen. Die Vorhersagen bestimmen den zukünftigen Bewegungspfad des HexaPODs, um Tumorbewegungen zu kompensieren. Dazu werden verschiedene Regler entwickelt, die eine Trajektorienverfolgung mit dem HexaPOD ermöglichen. Auf der Basis von linearer und nicht-linearer dynamischer Modellierung des HexaPODs mit Methoden der Systemidentifikation, wird zunächst ein modellprädiktiver Regler entwickelt. Ein zweiter Regler wird auf Basis einer Annahme über das Arbeitsprinzip des internen Reglers im HexaPOD entworfen. Schließlich wird ein dritter Regler vorgeschlagen, der beide vorhergehenden Regler miteinander kombiniert. Für jeden dieser Regler werden vergleichende Ergebnisse aus Experimenten mit realer Hardware und menschlichen Versuchspersonen präsentiert und diskutiert. Darüber hinaus wird die geeignete Wahl von freien Parametern in den Reglern vorgestellt. Neben einer präzisen Verfolgung der Referenztrajektorie spielt der Patientenkomfort eine entscheidende Rolle für die Akzeptanz des Systems. Es wird gezeigt, dass die Regler glatte Trajektorien realisieren können, um zu garantieren, dass sich Patienten wohl fühlen während ihre Tumorbewegung mit Genauigkeiten im Submillimeterbereich ausgeglichen wird. Gesamtfehler werden im Kompensationssystem analysiert, in dem diese zu Trajektorienverfolgungsfehlern und Prädiktionsfehlern in Beziehung gesetzt werden. Durch Ausnutzung von Eigenschaften verschiedener Prädiktoren wird gezeigt, dass die Startzeit des Systems bis die Verfolgung der Referenztrajektorie erreicht ist, wenige Sekunden beträgt. Dies gilt insbesondere für den Fall eines initial ruhenden HexaPODs und ohne Vorwissen über Tumorbewegungen. Dies zeigt die Eignung des Systems für die sehr kurz fraktionierten Behandlungen von Lungentumoren. Das Tumorkompensationssystem wurde ausschließlich auf Basis von klinischer Standard-Hardware entwickelt, die in vielen Behandlungsräumen zu finden ist. Durch ein einfaches und flexibles Design können Behandlungsräume in kosteneffizienter Weise um Möglichkeiten der Bewegungskompensation ergänzt werden. Darüber hinaus werden aktuelle Behandlungsmethoden wie intensitätsmodulierte Strahlentherapie oder Volumetric Modulated Arc Therapy in keiner Weise eingeschränkt. Aufgrund der Unterstützung verschiedener Kompensationsmodi kann das System auf alle beweglichen Tumore angewendet werden, unabhängig davon ob die Bewegungen vorhersagbar (Lungentumore) oder nicht vorhersagbar (Prostatatumore) sind. Durch Integration von geeigneten Methoden zur Tumorpositionsbestimmung kann das System auf einfache Weise zur Kompensation von anderen Tumoren erweitert werden. N2 - Radiation therapy today, on account of improvements in treatment procedures over the last 60 years, allows precise treatment of static tumors inside the human body. However, irradiation of moving tumors is still a challenging task as moving tumors often leave the treatment beam and the radiation dose delivered to the tumor reduces simultaneously increasing that on healthy tissue. This research work aims to push the frontiers of radiation therapy in order to enable precise treatment of moving tumors with focus on research and development of a unique real-time system enabling active motion compensation through robotic means to compensate tumor motion. During treatment, patients lie on a treatment couch which is normally used for static position corrections of patient set-up errors prior to radiation treatment. The treatment couch used, called HexaPOD, is a parallel manipulator with six degrees of freedom which can precisely position heavy loads inside a small region. Despite the HexaPOD not initially built with dynamics in mind, it is used in this work for sustained motion compensation by moving patients such that tumors stay precisely located at the center of the treatment beam during the complete course of treatment. In order to realize real-time tumor motion compensation by means of the HexaPOD, several challanges need to be addressed. Real-time aspects are covered by the adoption of a hard real-time operation system in combination with measurement and estimation of latencies of all physical quantities in the compensation system such as tumor or breathing position measurements. Accurate timing information is respected consistently in the whole system and all software-induced latencies are adaptively compensated for. This requires knowledge of future tumor positions from predictors. Several predictors for breathing and tumor motion predictions are proposed and evaluated in terms of a variety of different performance metrics. Extensions to prediction algorithms are introduced fusing both breathing and tumor position information to allow for predictions without the need of an explicit correlation model. Predictions determine the future motion path of the HexaPOD in order to compensate for tumor motion. Several control schemes are developed to enable reference tracking for the HexaPOD. Based on linear and non-linear dynamic modelling of the HexaPOD with system identification methods, a first controller is derived in the form of a model predictive controller. A second controller is proposed based on an assumption of the working principle of the HexaPOD's internal controller. Finally, a third controller is derived as combination of the first and second one. For each of these controllers, comparative results with real hardware experiments and humans in the loop as well as choices of free parameters are presented and discussed. Apart from precise tracking, emphasis is placed on patient comfort which is of crucial importance for acceptance of the system. It is demonstrated that smooth trajectories can be realized by the controllers to guarantee that patients feel comfortable while their tumor motion is compensated at sub-millimeter accuracies. Overall errors of the system are analyzed by relating them to tracking and prediction errors. By exploiting the properties of different predictors, it is shown that the startup time until tracking is reached can be reduced to only a few seconds, even in the case of an initially at-rest HexaPOD and with no initial knowledge of tumor motion. This makes the system especially suitable for the relatively short-fractionated treatment sessions for lung tumors. The tumor motion compensation system has been developed solely based on standard clinical hardware, found in most treatment rooms. With a simple and flexible design, existing treatment can be updated in a cost-efficient way to introduce motion compensation capabilities. Simultaneously, the system does not impose any constraints on state-of-the-art treatment types such as intensity modulated radiotherapy or volumetric modulated arc therapy. Supporting different compensation modes, the system can be applied to any moving tumor whether its motion is predictable (lung tumors) or unpredictable (prostate tumors). By integration of adequate tumor position determination methods, the system can be easily extended to other tumors as well. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 7 KW - Robotik KW - Bewegungskompensation KW - Regelung KW - Strahlentherapie KW - Vorhersage KW - Tumorbewegung KW - Echzeit KW - Prediction KW - Tumor motion KW - Real-time Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79045 SN - 978-3-923959-88-4 ER - TY - THES A1 - Sun, Kaipeng T1 - Six Degrees of Freedom Object Pose Estimation with Fusion Data from a Time-of-flight Camera and a Color Camera T1 - 6DOF Posenschätzung durch Datenfusion einer Time-of-Flight-Kamera und einer Farbkamera N2 - Object six Degrees of Freedom (6DOF) pose estimation is a fundamental problem in many practical robotic applications, where the target or an obstacle with a simple or complex shape can move fast in cluttered environments. In this thesis, a 6DOF pose estimation algorithm is developed based on the fused data from a time-of-flight camera and a color camera. The algorithm is divided into two stages, an annealed particle filter based coarse pose estimation stage and a gradient decent based accurate pose optimization stage. In the first stage, each particle is evaluated with sparse representation. In this stage, the large inter-frame motion of the target can be well handled. In the second stage, the range data based conventional Iterative Closest Point is extended by incorporating the target appearance information and used for calculating the accurate pose by refining the coarse estimate from the first stage. For dealing with significant illumination variations during the tracking, spherical harmonic illumination modeling is investigated and integrated into both stages. The robustness and accuracy of the proposed algorithm are demonstrated through experiments on various objects in both indoor and outdoor environments. Moreover, real-time performance can be achieved with graphics processing unit acceleration. N2 - Die 6DOF Posenschätzung von Objekten ist ein fundamentales Problem in vielen praktischen Robotikanwendungen, bei denen sich ein Ziel- oder Hindernisobjekt, einfacher oder komplexer Form, schnell in einer unstrukturierten schwierigen Umgebung bewegt. In dieser Forschungsarbeit wird zur Lösung des Problem ein 6DOF Posenschätzer entwickelt, der auf der Fusion von Daten einer Time-of-Flight-Kamera und einer Farbkamera beruht. Der Algorithmus ist in zwei Phasen unterteilt, ein Annealed Partikel-Filter bestimmt eine grobe Posenschätzung, welche mittels eines Gradientenverfahrens in einer zweiten Phase optimiert wird. In der ersten Phase wird jeder Partikel mittels sparse represenation ausgewertet, auf diese Weise kann eine große Inter-Frame-Bewegung des Zielobjektes gut behandelt werden. In der zweiten Phase wird die genaue Pose des Zielobjektes mittels des konventionellen, auf Entfernungsdaten beruhenden, Iterative Closest Point-Algorithmus aus der groben Schätzung der ersten Stufe berechnet. Der Algorithmus wurde dabei erweitert, so dass auch Informationen über das äußere Erscheinungsbild des Zielobjektes verwendet werden. Zur Kompensation von signifikanten Beleuchtungsschwankungen während des Trackings, wurde eine Modellierung der Ausleuchtung mittels Kugelflächenfunktionen erforscht und in beide Stufen der Posenschätzung integriert. Die Leistungsfähigkeit, Robustheit und Genauigkeit des entwickelten Algorithmus wurde in Experimenten im Innen- und Außenbereich mit verschiedenen Zielobjekten gezeigt. Zudem konnte gezeigt werden, dass die Schätzung mit Hilfe von Grafikprozessoren in Echtzeit möglich ist. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 10 KW - Mustererkennung KW - Maschinelles Sehen KW - Sensor KW - 3D Vision KW - 6DOF Pose Estimation KW - Visual Tracking KW - Pattern Recognition KW - Computer Vision KW - 3D Sensor Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-105089 SN - 978-3-923959-97-6 ER - TY - RPRT A1 - Kounev, Samuel A1 - Brosig, Fabian A1 - Huber, Nikolaus T1 - The Descartes Modeling Language N2 - This technical report introduces the Descartes Modeling Language (DML), a new architecture-level modeling language for modeling Quality-of-Service (QoS) and resource management related aspects of modern dynamic IT systems, infrastructures and services. DML is designed to serve as a basis for self-aware resource management during operation ensuring that system QoS requirements are continuously satisfied while infrastructure resources are utilized as efficiently as possible. KW - Ressourcenmanagement KW - Software Engineering KW - Resource and Performance Management KW - Software Performance Engineering KW - Software Performance Modeling KW - Performance Management KW - Quality-of-Service Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-104887 ER - TY - THES A1 - Klein, Dominik Werner T1 - Design and Evaluation of Components for Future Internet Architectures T1 - Entwurf und Bewertung von Komponenten für zukünftige Internet Architekturen N2 - Die derzeitige Internetarchitektur wurde nicht in einem geplanten Prozess konzipiert und entwickelt, sondern hat vielmehr eine evolutionsartige Entwicklung hinter sich. Auslöser für die jeweiligen Evolutionsschritte waren dabei meist aufstrebende Anwendungen, welche neue Anforderungen an die zugrundeliegende Netzarchitektur gestellt haben. Um diese Anforderungen zu erfüllen, wurden häufig neuartige Dienste oder Protokolle spezifiziert und in die bestehende Architektur integriert. Dieser Prozess ist jedoch meist mit hohem Aufwand verbunden und daher sehr träge, was die Entwicklung und Verbreitung innovativer Dienste beeinträchtigt. Derzeitig diskutierte Konzepte wie Software-Defined Networking (SDN) oder Netzvirtualisierung (NV) werden als eine Möglichkeit angesehen, die Altlasten der bestehenden Internetarchitektur zu lösen. Beiden Konzepten gemein ist die Idee, logische Netze über dem physikalischen Substrat zu betreiben. Diese logischen Netze sind hochdynamisch und können so flexibel an die Anforderungen der jeweiligen Anwendungen angepasst werden. Insbesondere erlaubt das Konzept der Virtualisierung intelligentere Netzknoten, was innovative neue Anwendungsfälle ermöglicht. Ein häufig in diesem Zusammenhang diskutierter Anwendungsfall ist die Mobilität sowohl von Endgeräten als auch von Diensten an sich. Die Mobilität der Dienste wird hierbei ausgenutzt, um die Zugriffsverzögerung oder die belegten Ressourcen im Netz zu reduzieren, indem die Dienste zum Beispiel in für den Nutzer geographisch nahe Datenzentren migriert werden. Neben den reinen Mechanismen bezüglich Dienst- und Endgerätemobilität sind in diesem Zusammenhang auch geeignete Überwachungslösungen relevant, welche die vom Nutzer wahrgenommene Dienstgüte bewerten können. Diese Lösungen liefern wichtige Entscheidungshilfen für die Migration oder überwachen mögliche Effekte der Migration auf die erfahrene Dienstgüte beim Nutzer. Im Falle von Video Streaming ermöglicht ein solcher Anwendungsfall die flexible Anpassung der Streaming Topologie für mobile Nutzer, um so die Videoqualität unabhängig vom Zugangsnetz aufrechterhalten zu können. Im Rahmen dieser Doktorarbeit wird der beschriebene Anwendungsfall am Beispiel einer Video Streaming Anwendung näher analysiert und auftretende Herausforderungen werden diskutiert. Des Weiteren werden Lösungsansätze vorgestellt und bezüglich ihrer Effizienz ausgewertet. Im Detail beschäftigt sich die Arbeit mit der Leistungsanalyse von Mechanismen für die Dienstmobilität und entwickelt eine Architektur zur Optimierung der Dienstmobilität. Im Bereich Endgerätemobilität werden Verbesserungen entwickelt, welche die Latenz zwischen Endgerät und Dienst reduzieren oder die Konnektivität unabhängig vom Zugangsnetz gewährleisten. Im letzten Teilbereich wird eine Lösung zur Überwachung der Videoqualität im Netz entwickelt und bezüglich ihrer Genauigkeit analysiert. N2 - Today’s Internet architecture was not designed from scratch but was driven by new services that emerged during its development. Hence, it is often described as patchwork where additional patches are applied in case new services require modifications to the existing architecture. This process however is rather slow and hinders the development of innovative network services with certain architecture or network requirements. Currently discussed technologies like Software-Defined Networking (SDN) or Network Virtualization (NV) are seen as key enabling technologies to overcome this rigid best effort legacy of the Internet. Both technologies offer the possibility to create virtual networks that accommodate the specific needs of certain services. These logical networks are operated on top of a physical substrate and facilitate flexible network resource allocation as physical resources can be added and removed depending on the current network and load situation. In addition, the clear separation and isolation of networks foster the development of application-aware networks that fulfill the special requirements of emerging applications. A prominent use case that benefits from these extended capabilities of the network is denoted with service component mobility. Services hosted on Virtual Machines (VMs) follow their consuming mobile endpoints, so that access latency as well as consumed network resources are reduced. Especially for applications like video streaming, which consume a large fraction of the available resources, is this an important means to relieve the resource constraints and eventually provide better service quality. Service and endpoint mobility both allow an adaptation of the used paths between an offered service, i.e., video streaming and the consuming users in case the service quality drops due to network problems. To make evidence-based adaptations in case of quality drops, a scalable monitoring component is required that is able to monitor the service quality for video streaming applications with reliable accuracy. This monograph details challenges that arise when deploying a certain service, i.e., video streaming, in a future virtualized network architecture and discusses possible solutions. In particular, this work evaluates the performance of mechanisms enabling service mobility and presents an optimized architecture for service mobility. Concerning endpoint mobility, improvements are developed that reduce the latency between endpoints and consumed services and ensure connectivity regardless of the used mobile access network. In the last part, a network-based video quality monitoring solution is developed and its accuracy is evaluated. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/14 KW - Leistungsbewertung KW - Netzwerkmanagement KW - Virtuelles Netzwerk KW - Mobiles Internet KW - Service Mobility KW - Endpoint Mobility KW - Video Quality Monitoring Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93134 SN - 1432-8801 ER -