TY - JOUR A1 - Becker, Martin A1 - Caminiti, Saverio A1 - Fiorella, Donato A1 - Francis, Louise A1 - Gravino, Pietro A1 - Haklay, Mordechai (Muki) A1 - Hotho, Andreas A1 - Loreto, Virrorio A1 - Mueller, Juergen A1 - Ricchiuti, Ferdinando A1 - Servedio, Vito D. P. A1 - Sirbu, Alina A1 - Tria, Franesca T1 - Awareness and Learning in Participatory Noise Sensing JF - PLOS ONE N2 - The development of ICT infrastructures has facilitated the emergence of new paradigms for looking at society and the environment over the last few years. Participatory environmental sensing, i.e. directly involving citizens in environmental monitoring, is one example, which is hoped to encourage learning and enhance awareness of environmental issues. In this paper, an analysis of the behaviour of individuals involved in noise sensing is presented. Citizens have been involved in noise measuring activities through the WideNoise smartphone application. This application has been designed to record both objective (noise samples) and subjective (opinions, feelings) data. The application has been open to be used freely by anyone and has been widely employed worldwide. In addition, several test cases have been organised in European countries. Based on the information submitted by users, an analysis of emerging awareness and learning is performed. The data show that changes in the way the environment is perceived after repeated usage of the application do appear. Specifically, users learn how to recognise different noise levels they are exposed to. Additionally, the subjective data collected indicate an increased user involvement in time and a categorisation effect between pleasant and less pleasant environments. KW - exposure Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127675 SN - 1932-6203 VL - 8 IS - 12 ER - TY - JOUR A1 - Buchin, Kevin A1 - Buchin, Maike A1 - Byrka, Jaroslaw A1 - Nöllenburg, Martin A1 - Okamoto, Yoshio A1 - Silveira, Rodrigo I. A1 - Wolff, Alexander T1 - Drawing (Complete) Binary Tanglegrams JF - Algorithmica N2 - A binary tanglegram is a drawing of a pair of rooted binary trees whose leaf sets are in one-to-one correspondence; matching leaves are connected by inter-tree edges. For applications, for example, in phylogenetics, it is essential that both trees are drawn without edge crossings and that the inter-tree edges have as few crossings as possible. It is known that finding a tanglegram with the minimum number of crossings is NP-hard and that the problem is fixed-parameter tractable with respect to that number. We prove that under the Unique Games Conjecture there is no constant-factor approximation for binary trees. We show that the problem is NP-hard even if both trees are complete binary trees. For this case we give an O(n 3)-time 2-approximation and a new, simple fixed-parameter algorithm. We show that the maximization version of the dual problem for binary trees can be reduced to a version of MaxCut for which the algorithm of Goemans and Williamson yields a 0.878-approximation. KW - NP-hardness KW - crossing minimization KW - binary tanglegram KW - approximation algorithm KW - fixed-parameter tractability Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-124622 VL - 62 ER - TY - JOUR A1 - Toepfer, Martin A1 - Corovic, Hamo A1 - Fette, Georg A1 - Klügl, Peter A1 - Störk, Stefan A1 - Puppe, Frank T1 - Fine-grained information extraction from German transthoracic echocardiography reports JF - BMC Medical Informatics and Decision Making N2 - Background Information extraction techniques that get structured representations out of unstructured data make a large amount of clinically relevant information about patients accessible for semantic applications. These methods typically rely on standardized terminologies that guide this process. Many languages and clinical domains, however, lack appropriate resources and tools, as well as evaluations of their applications, especially if detailed conceptualizations of the domain are required. For instance, German transthoracic echocardiography reports have not been targeted sufficiently before, despite of their importance for clinical trials. This work therefore aimed at development and evaluation of an information extraction component with a fine-grained terminology that enables to recognize almost all relevant information stated in German transthoracic echocardiography reports at the University Hospital of Würzburg. Methods A domain expert validated and iteratively refined an automatically inferred base terminology. The terminology was used by an ontology-driven information extraction system that outputs attribute value pairs. The final component has been mapped to the central elements of a standardized terminology, and it has been evaluated according to documents with different layouts. Results The final system achieved state-of-the-art precision (micro average.996) and recall (micro average.961) on 100 test documents that represent more than 90 % of all reports. In particular, principal aspects as defined in a standardized external terminology were recognized with f 1=.989 (micro average) and f 1=.963 (macro average). As a result of keyword matching and restraint concept extraction, the system obtained high precision also on unstructured or exceptionally short documents, and documents with uncommon layout. Conclusions The developed terminology and the proposed information extraction system allow to extract fine-grained information from German semi-structured transthoracic echocardiography reports with very high precision and high recall on the majority of documents at the University Hospital of Würzburg. Extracted results populate a clinical data warehouse which supports clinical research. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-125509 VL - 15 IS - 91 ER - TY - THES A1 - Hopfner, Marbod T1 - Source Code Analysis, Management, and Visualization for PROLOG T1 - Quelltextanalyse, Verwaltung und Visualisierung für Prolog N2 - This thesis deals with the management and analysis of source code, which is represented in XML. Using the elementary methods of the XML repository, the XML source code representation is accessed, changed, updated, and saved. We reason about the source code, refactor source code and we visualize dependency graphs for call analysis. The visualized dependencies between files, modules, or packages are used to structure the source code in order to get a system, which is easily to comprehend, to modify and to complete. Sophisticated methods have been developed to slice the source code in order to obtain a working package of a large system, containing only a specific functionality. The basic methods, on which the visualizations and analyses are built on can be changed like changing a plug-in. The visualization methods can be reused in order to handle arbitrary source code representations, e.g., JAML, PHPML, PROLOGML. Dependencies of other context can be visualized, too, e.g., ER diagrams, or website references. The tool SCAV supports source code visualization and analyzing methods. N2 - Diese Dissertation beschäftigt sich mit der Verwaltung und Analyse von Quellcode, der in XML repräsentiert ist. Es werden Abhängigkeitsgraphen visualisiert um ein Projekt leichter verstehen zu können. Es kann auch ein Slice einer bestimmten Methode aus dem Projekt erstellt werden. Die Programmierung ist in Modulen gemacht, so dass die Funktionalität leicht erweitert werden kann. KW - Refactoring KW - Software Engineering KW - Refactoring KW - Call Graph KW - Dependency Graph KW - Abhängigskeitsgraph KW - Software Engineering KW - Source Code Visualization KW - Refactoring KW - Call Graph KW - Dependency Graph KW - Abhängigskeitsgraph KW - Software Engineering KW - Source Code Visualization Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36300 ER - TY - THES A1 - Binder, Andreas T1 - Die stochastische Wissenschaft und zwei Teilsysteme eines Web-basierten Informations- und Anwendungssystems zu ihrer Etablierung T1 - The stochastic science and two subsystems of a web-based information and application system for its establishment N2 - Das stochastische Denken, die Bernoullische Stochastik und dessen informationstechnologische Umsetzung, namens Stochastikon stellen die Grundlage für das Verständnis und die erfolgreiche Nutzung einer stochastischen Wissenschaft dar. Im Rahmen dieser Arbeit erfolgt eine Klärung des Begriffs des stochastischen Denkens, eine anschauliche Darstellung der von Elart von Collani entwickelten Bernoullischen Stochastik und eine Beschreibung von Stochastikon. Dabei werden sowohl das Gesamtkonzept von Stochastikon, sowie die Ziele, Aufgaben und die Realisierung der beiden Teilsysteme namens Mentor und Encyclopedia vorgestellt. Das stochastische Denken erlaubt eine realitätsnahe Sichtweise der Dinge, d.h. eine Sichtweise, die mit den menschlichen Beobachtungen und Erfahrungen im Einklang steht und somit die Unsicherheit über zukünftige Entwicklungen berücksichtigt. Der in diesem Kontext verwendete Begriff der Unsicherheit bezieht sich ausschließlich auf zukünftige Entwicklungen und äußert sich in Variabilität. Quellen der Unsicherheit sind einerseits die menschliche Ignoranz und andererseits der Zufall. Unter Ignoranz wird hierbei die Unwissenheit des Menschen über die unbekannten, aber feststehenden Fakten verstanden, die die Anfangsbedingungen der zukünftigen Entwicklung repräsentieren. Die Bernoullische Stochastik liefert ein Regelwerk und ermöglicht die Entwicklung eines quantitativen Modells zur Beschreibung der Unsicherheit und expliziter Einbeziehung der beiden Quellen Ignoranz und Zufall. Das Modell trägt den Namen Bernoulli-Raum und bildet die Grundlage für die Herleitung quantitativer Verfahren, um zuverlässige und genaue Aussagen sowohl über die nicht-existente zufällige Zukunft (Vorhersageverfahren), als auch über die unbekannte feststehende Vergangenheit (Messverfahren). Das Softwaresystem Stochastikon implementiert die Bernoullische Stochastik in Form einer Reihe autarker, miteinander kommunizierender Teilsysteme. Ziel des Teilsystems Encyclopedia ist die Bereitstellung und Bewertung stochastischen Wissens. Das Teilsystem Mentor dient der Unterstützung des Anwenders bei der Problemlösungsfindung durch Identifikation eines richtigen Modells bzw. eines korrekten Bernoulli-Raums. Der Lösungsfindungsprozess selber enthält keinerlei Unsicherheit. Die ganze Unsicherheit steckt in der Lösung, d.h. im Bernoulli-Raum, der explizit die vorhandene Unwissenheit (Ignoranz) und den vorliegenden Zufall abdeckend enthält. N2 - Stochastic thinking, Bernoulli stochastics and its information technological realization, called Stochastikon, represent the basis for understanding and successfully utilizing stochastic science. This thesis defines the concept of stochastic thinking, introduces Bernoulli stochastics, which has been developed by Elart von Collani, and describes the IT system Stochastikon. The concept and the design of Stochastikon are outlined and the aims, tasks and realizations of the two subsystems Mentor and Encyclopedia are given in detail. Stochastic thinking enables a realistic view of reality. This means a view, which is in agreement with observation and experience and, thus, takes into account uncertainty about future developments. In this context the term of uncertainty is used exclusively with respect to future development and materializes in variability. Sources of uncertainty are on the one hand human ignorance about fixed facts on the one hand and randomness on the other. Bernoulli stochastics makes available a set of rules for developing a quantitative model about uncertainty taking particularly into account the two sources ignorance and randomness. The model is called Bernoulli-Space, which is the basis for reliable and precise quantitative procedures for statements about the random future (prediction procedures) as well as about the unknown fixed past (measurement procedures). The software system, called Stochastikon, implements Bernoulli stochastics based on a set of self-sustained intercommunicating subsystems. The Subsystem Encyclopedia makes stochastical knowledge available, while the Subsystem Mentor supports the user for solving (stochastic) problems by identifying the correct model respectively correct Bernoulli-Space. The problem solving process is free of uncertainty, because all uncertainty is modelled by Bernoulli-space. KW - Stochastik KW - stochastisches Denken KW - Bernoullische Stochastik KW - Bernoulli-Raum KW - Stochastikon KW - stochastic thinking KW - Bernoulli stochastics KW - Bernoullispace KW - Stochastikon Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26146 ER - TY - THES A1 - Binzenhöfer, Andreas T1 - Performance Analysis of Structured Overlay Networks T1 - Leistungsbewertung Strukturierter Overlay Netze N2 - Overlay networks establish logical connections between users on top of the physical network. While randomly connected overlay networks provide only a best effort service, a new generation of structured overlay systems based on Distributed Hash Tables (DHTs) was proposed by the research community. However, there is still a lack of understanding the performance of such DHTs. Additionally, those architectures are highly distributed and therefore appear as a black box to the operator. Yet an operator does not want to lose control over his system and needs to be able to continuously observe and examine its current state at runtime. This work addresses both problems and shows how the solutions can be combined into a more self-organizing overlay concept. At first, we evaluate the performance of structured overlay networks under different aspects and thereby illuminate in how far such architectures are able to support carrier-grade applications. Secondly, to enable operators to monitor and understand their deployed system in more detail, we introduce both active as well as passive methods to gather information about the current state of the overlay network. N2 - Unter einem Overlay Netz versteht man den Zusammenschluss mehrerer Komponenten zu einer logischen Topologie, die auf einer existierenden physikalischen Infrastruktur aufsetzt. Da zufällige Verbindungen zwischen den einzelnen Teilnehmern aber sehr ineffizient sind, wurden strukturierte Overlay Netze entworfen, bei denen die Beziehungen zwischen den einzelnen Teilnehmern fest vorgeschrieben sind. Solche strukturierten Mechanismen versprechen zwar ein großes Potential, dieses wurde aber noch nicht ausreichend untersucht bzw. wissenschaftlich nachgewiesen. In dieser Arbeit wird mit mathematischen Methoden und ereignisorientierter Simulation die Leistungsfähigkeit von strukturierten Overlay Netzen untersucht. Da diese stark von der aktuellen Situation im Overlay abhängt, entwickeln wir Methoden, mit denen sich sowohl passiv, als auch aktiv, wichtige Systemparameter zur Laufzeit abschätzen bzw. messen lassen. Zusammen führen die vorgeschlagenen Methoden zu selbstorganisierenden Mechanismen, die den aktuellen Zustand des Overlays überwachen, diesen bewerten und sich gegebenenfalls automatisch an die aktuellen Verhältnisse anpassen T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/08 KW - Overlay-Netz KW - Leistungsbewertung KW - Peer-to-Peer-Netz KW - Mathematisches Modell KW - Chord KW - Kademlia KW - DHT KW - Overlay KW - Chord KW - Kademlia KW - DHT Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26291 ER - TY - THES A1 - Pries, Jan Rastin T1 - Performance Optimization of Wireless Infrastructure and Mesh Networks T1 - Leistungsoptimierung von drahtlosen Infrastruktur und Mesh Netzen N2 - Future broadband wireless networks should be able to support not only best effort traffic but also real-time traffic with strict Quality of Service (QoS) constraints. In addition, their available resources are scare and limit the number of users. To facilitate QoS guarantees and increase the maximum number of concurrent users, wireless networks require careful planning and optimization. In this monograph, we studied three aspects of performance optimization in wireless networks: resource optimization in WLAN infrastructure networks, quality of experience control in wireless mesh networks, and planning and optimization of wireless mesh networks. An adaptive resource management system is required to effectively utilize the limited resources on the air interface and to guarantee QoS for real-time applications. Thereby, both WLAN infrastructure and WLAN mesh networks have to be considered. An a-priori setting of the access parameters is not meaningful due to the contention-based medium access and the high dynamics of the system. Thus, a management system is required which dynamically adjusts the channel access parameters based on the network load. While this is sufficient for wireless infrastructure networks, interferences on neighboring paths and self-interferences have to be considered for wireless mesh networks. In addition, a careful channel allocation and route assignment is needed. Due to the large parameter space, standard optimization techniques fail for optimizing large wireless mesh networks. In this monograph, we reveal that biology-inspired optimization techniques, namely genetic algorithms, are well-suitable for the planning and optimization of wireless mesh networks. Although genetic algorithms generally do not always find the optimal solution, we show that with a good parameter set for the genetic algorithm, the overall throughput of the wireless mesh network can be significantly improved while still sharing the resources fairly among the users. N2 - Die Anbindung an das Internet erfolgt zunehmend über drahtlose Netze. Deren Ressourcen sind allerdings limitiert, was die Anzahl der unterstützten Nutzer stark einschränkt. Zudem ist ein Trend dieser Nutzer weg von der Verwendung reiner Datendienste zu Diensten mit Echtzeitanforderungen wie Voice over IP (VoIP) zu erkennen, deren Dienstgüteanforderungen eingehalten werden müssen. Heutige drahtlose Zugangsnetze sind jedoch nur für den herkömmlichen Datenverkehr ausgelegt. Der IEEE 802.11 WLAN Standard unterscheidet zwar zwischen verschiedenen Dienstklassen, gibt aber keine Dienstgütegarantien. Um die Dienstgüte (Quality of Service, QoS), bzw. die vom Nutzer erfahrene Dienstgüte (Quality of Experience, QoE) zu garantieren, müssen die zukünftigen drahtlosen Netze daher sorgfältig geplant und optimiert werden. Um die limitierten Ressourcen auf der Luftschnittstelle effektiv zu nutzen und um Dienstgüteanforderungen für Echtzeitanwendungen einzuhalten, bedarf es eines adaptiven Ressourcenmanagements. Dabei sind sowohl drahtlose Infrastruktur, als auch drahtlose Mesh-Netze zu betrachten. Durch den randomisierten Medienzugriff und die hohe Dynamik im System ist eine a-priori Wahl der Zugangsparameter nicht sinnvoll. Vielmehr wird ein Managementsystem benötigt, das die Zugangsparameter dynamisch in Abhängigkeit der Last in einem Netz wählt. Während dies für drahtlose Infrastrukturnetze ausreicht, müssen in drahtlosen Mesh-Netzen zusätzlich noch Interferenzen von Nachbarpfaden und Eigeninterferenzen berücksichtigt werden. Desweiteren ist eine sorgfältige Planung der Kanalzuweisung und des Routings notwendig, um einerseits den Durchsatz in drahtlosen Mesh-Netzen zu maximieren und andererseits die Ressourcen fair zwischen den Stationen aufzuteilen. Da es dabei eine Vielzahl von Parametern zu berücksichtigen gilt, sind neue Optimierungsmethoden notwendig, die es ermöglichen, auch große Mesh-Netze in annehmbarer Zeit zu planen und zu optimieren. Diese Doktorarbeit arbeitet die folgenden drei Optimierungsmöglichkeiten für drahtlose Zugangsnetze aus: Optimierung der Zugangsparameter in drahtlosen Infrastrukturnetzen, Optimierung von drahtlosen Mesh-Netzen unter Berücksichtigung der QoE und Planung und Optimierung von drahtlosen Mesh-Netzen mit Berücksichtigung einer fairen Ressourcenallokation. Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Optimierungsmöglichkeiten. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/10 KW - IEEE 802.11 KW - Leistungsbewertung KW - Optimierung KW - Dienstgüte KW - Netzplanung KW - Drahtloses lokales Netz KW - WLAN KW - Mesh Netze KW - Genetische Optimierung KW - WLAN KW - Optimization KW - Mesh Networks KW - Genetic Optimization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46097 ER - TY - CHAP A1 - Epplée, Rafael A1 - Langbehn, Eike T1 - Overlapping Architecture: Implementation of Impossible Spaces in Virtual Reality Games N2 - Natural walking in virtual reality games is constrained by the physical boundaries defined by the size of the player’s tracking space. Impossible spaces, a redirected walking technique, enlarge the virtual environment by creating overlapping architecture and letting multiple locations occupy the same physical space. Within certain thresholds, this is subtle to the player. In this paper, we present our approach to implement such impossible spaces and describe how we handled challenges like objects with simulated physics or precomputed global illumination. KW - virtual reality KW - games KW - locomotion Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246045 ER - TY - THES A1 - Busch, Stephan T1 - Robust, Flexible and Efficient Design for Miniature Satellite Systems T1 - Moderne Kleinstsatelliten - Zwischen Robustheit, Flexibilität und Effizienz N2 - Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology. This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg’s advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner. Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions. The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested. N2 - Miniaturisierte Satellitensysteme übernehmen zunehmend eine entscheidende Rolle in der fortschreitenden Globalisierung und Demokratisierung der Raumfahrt. Großes Innovationspotential und neue Kommerzialisierungschancen verspricht der effektive Einsatz von Kleinstsatelliten in zukünftigen fraktionierten Missionen für Erdbeobachtungs- und Kommunikationsanwendungen. Basierend auf vielen kleinen kooperierenden Systemen können diese Systeme zukünftig große multifunktionale Satelliten ergänzen oder ersetzen. Die Herausforderung bei der Entwicklung miniaturisierter Satellitensysteme ist die Gratwanderung zwischen der im Rahmen der Miniaturisierung notwendigen Effizienz, der für die Erfüllung der Mission geforderten Zuverlässigkeit und der wünschenswerten Wiederverwendbarkeit und Erweiterbarkeit zur Realisierung agiler Kleinstsatellitenserien. Diese Arbeit adressiert verschiedene Aspekte für den optimalen Entwurf robuster, flexibler und effizienter Kleinstsatelliten am Beispiel des UWE Pico-Satelliten Bus der Universität Würzburg. Mit dem Ziel der Entwicklung einer soliden Basisplattform für zukünftige Kleinstsatelliten-Formationen wurden entsprechende Designansätze im Rahmen des UWE-3 Projektes in einem integralen Designansatz konsistent umgesetzt. Neben der Entwicklung von effizienten Redundanzkonzepten mit minimalem Overhead für den optimalen Betrieb auf Ressourcen-limitierten Kleinstsatelliten wurde ein modularer Satellitenbus entworfen, der als eine robuste und erweiterbare Basis für zukünftige Missionen dienen soll. Damit realisiert UWE-3 eine der effizientesten Kleinstsatelliten-Architekturen die in den letzten Jahren in den Orbit gebracht wurde. Dargestellte Missionsergebnisse fassen den erfolgreichen Betrieb des Satelliten seit seinem Launch in Jahr 2013 zusammen. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 11 KW - Kleinsatellit KW - Fehlertoleranz KW - Miniaturisierung KW - Modularität KW - Picosatellite KW - Satellit Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136523 SN - 978-3-945459-10-2 ER - TY - JOUR A1 - Mandel, Alexander A1 - Hörnlein, Alexander A1 - Ifland, Marianus A1 - Lüneburg, Edeltraud A1 - Deckert, Jürgen A1 - Puppe, Frank T1 - Aufwandsanalyse für computerunterstützte Multiple-Choice Papierklausuren T1 - Cost analysis for computer supported multiple-choice paper examinations JF - GMS Journal for Medical Education N2 - Introduction: Multiple-choice-examinations are still fundamental for assessment in medical degree programs. In addition to content related research, the optimization of the technical procedure is an important question. Medical examiners face three options: paper-based examinations with or without computer support or completely electronic examinations. Critical aspects are the effort for formatting, the logistic effort during the actual examination, quality, promptness and effort of the correction, the time for making the documents available for inspection by the students, and the statistical analysis of the examination results. Methods: Since three semesters a computer program for input and formatting of MC-questions in medical and other paper-based examinations is used and continuously improved at Wuerzburg University. In the winter semester (WS) 2009/10 eleven, in the summer semester (SS) 2010 twelve and in WS 2010/11 thirteen medical examinations were accomplished with the program and automatically evaluated. For the last two semesters the remaining manual workload was recorded. Results: The cost of the formatting and the subsequent analysis including adjustments of the analysis of an average examination with about 140 participants and about 35 questions was 5-7 hours for exams without complications in the winter semester 2009/2010, about 2 hours in SS 2010 and about 1.5 hours in the winter semester 2010/11. Including exams with complications, the average time was about 3 hours per exam in SS 2010 and 2.67 hours for the WS 10/11. Discussion: For conventional multiple-choice exams the computer-based formatting and evaluation of paper-based exams offers a significant time reduction for lecturers in comparison with the manual correction of paper-based exams and compared to purely electronically conducted exams it needs a much simpler technological infrastructure and fewer staff during the exam." N2 - Einleitung: Multiple-Choice-Klausuren spielen immer noch eine herausragende Rolle für fakultätsinterne medizinische Prüfungen. Neben inhaltlichen Arbeiten stellt sich die Frage, wie die technische Abwicklung optimiert werden kann. Für Dozenten in der Medizin gibt es zunehmend drei Optionen zur Durchführung von MC-Klausuren: Papierklausuren mit oder ohne Computerunterstützung oder vollständig elektronische Klausuren. Kritische Faktoren sind der Aufwand für die Formatierung der Klausur, der logistische Aufwand bei der Klausurdurchführung, die Qualität, Schnelligkeit und der Aufwand der Klausurkorrektur, die Bereitstellung der Dokumente für die Einsichtnahme, und die statistische Analyse der Klausurergebnisse. Methoden: An der Universität Würzburg wird seit drei Semestern ein Computerprogramm zur Eingabe und Formatierung der MC-Fragen in medizinischen und anderen Papierklausuren verwendet und optimiert, mit dem im Wintersemester (WS) 2009/2010 elf, im Sommersemester (SS) 2010 zwölf und im WS 2010/11 dreizehn medizinische Klausuren erstellt und anschließend die eingescannten Antwortblätter automatisch ausgewertet wurden. In den letzten beiden Semestern wurden die Aufwände protokolliert. Ergebnisse: Der Aufwand der Formatierung und der Auswertung einschl. nachträglicher Anpassung der Auswertung einer Durchschnittsklausur mit ca. 140 Teilnehmern und ca. 35 Fragen ist von 5-7 Stunden für Klausuren ohne Komplikation im WS 2009/2010 über ca. 2 Stunden im SS 2010 auf ca. 1,5 Stunden im WS 2010/11 gefallen. Einschließlich der Klausuren mit Komplikationen bei der Auswertung betrug die durchschnittliche Zeit im SS 2010 ca. 3 Stunden und im WS 10/11 ca. 2,67 Stunden pro Klausur. Diskussion: Für konventionelle Multiple-Choice-Klausuren bietet die computergestützte Formatierung und Auswertung von Papierklausuren einen beträchtlichen Zeitvorteil für die Dozenten im Vergleich zur manuellen Korrektur von Papierklausuren und benötigt im Vergleich zu rein elektronischen Klausuren eine deutlich einfachere technische Infrastruktur und weniger Personal bei der Klausurdurchführung. KW - Multiple-Choice Prüfungen KW - Automatisierte Prüfungskorrektur KW - Aufwandsanalyse KW - Educational Measurement (I2.399) KW - Self-Evaluation Programs (I2.399.780) KW - Multiple-Choice Examination KW - Cost Analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134386 VL - 28 IS - 4 ER - TY - JOUR A1 - Böhler, Elmar A1 - Creignou, Nadia A1 - Galota, Matthias A1 - Reith, Steffen A1 - Schnoor, Henning A1 - Vollmer, Heribert T1 - Complexity Classifications for Different Equivalence and Audit Problems for Boolean Circuits JF - Logical Methods in Computer Science N2 - We study Boolean circuits as a representation of Boolean functions and conskier different equivalence, audit, and enumeration problems. For a number of restricted sets of gate types (bases) we obtain efficient algorithms, while for all other gate types we show these problems are at least NP-hard. KW - hierarchy KW - satisfiability problems Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131121 VL - 8 IS - 3:27 SP - 1 EP - 25 ER - TY - THES A1 - Herrler, Rainer T1 - Agentenbasierte Simulation zur Ablaufoptimierung in Krankenhäusern und anderen verteilten, dynamischen Umgebungen T1 - Agent based simulation of processes in hospitals and other distributed, dynamic environments. N2 - Verteilte dynamische Systeme unter lokalen und globalen Gesichtspunkten zu optimieren ist eine schwierige Aufgabe. Zwar sind grundsätzliche Auswirkungen einzelner Maßnahmen häufig bekannt, durch widerstrebende Ziele, Wechselwirkungen zwischen Prozessen und Nebenwirkungen von Maßnahmen ist ein analytisches Vorgehen bei der Optimierung nicht möglich. Besonders schwierig wird es, wenn lokale Einheiten einerseits ihre Ziele und Autonomie behalten sollen, aber durch zentrale Vorgaben bzw. Anreize so gesteuert werden sollen, dass ein übergeordnetes Ziel erreicht wird. Ein praktisches Beispiel dieses allgemeinen Optimierungsproblems findet sich im Gesundheitswesen. Das Management von modernen Kliniken ist stets mit dem Problem konfrontiert, die Qualität der Pflege zu gewährleisten und gleichzeitig kosteneffizient zu arbeiten. Hier gilt es unter gegeben Rahmenbedingungen und bei Respektierung der Autonomie der Funktionseinheiten, Optimierungsmaßnahmen zu finden und durchzuführen. Vorhandene Werkzeuge zur Simulation und Modellierung bieten für diese Aufgabe keine ausreichend guten Vorgehensmodelle und Modellierungsmechanismen. Die agentenbasierte Simulation ermöglicht die Abbildung solcher Systeme und die Durchführung von Simulationsexperimenten zur Bewertung einzelner Maßnahmen. Es werden Lösungswege und Werkzeuge vorgestellt und evaluiert, die den Benutzer bei der Formalisierung des Wissens und der Modellierung solch komplexer Szenarien unterstützen und ein systematisches Vorgehen zur Optimierung ermöglichen. N2 - To optimize distributed dynamic systems or organizations under local and global constraints is a difficult task. Although basic effects of single improvement steps are often known, it is difficult to examine a complex system with conflicting goals, interdependent processes and sideeffects. A special situation occurs, when local entities are supposed to keep autonomy but should be directed by a central instance, to reach a global goal. A concrete example of this optimization problem can be found in health care. The management of modern hospitals has to ensure the quality of service and at the same time work cost efficient. They want to find improvement steps, which on the one hand respect the typical local autonomy of functional units and on the other hand reduce cost factors like the avarage stay duration of patients. Existing tools for modelling and simulation don't provide adequate methodologies and techniques for this problem. Agent based simulation allowes to realize suitable models and finding improvement steps in simulation studies. New approaches and tools are presented and evaluated, that support users in knowledge formalization and model building. KW - Simulation KW - Prozessoptimierung KW - Modellierung KW - Mehragentensystem KW - Krankenhaus KW - Simulation KW - Process Optimization KW - Agentbased System KW - Hospital Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24483 ER - TY - THES A1 - Höhn, Winfried T1 - Mustererkennung in Frühdrucken T1 - Pattern Perception in Early Printed Books N2 - No abstract available KW - Mustererkennung KW - Frühdruck KW - pattern perception KW - early printed books Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-30429 ER - TY - THES A1 - Hoßfeld, Tobias T1 - Performance Evaluation of Future Internet Applications and Emerging User Behavior T1 - Leistungsbewertung von zukünftigen Internet-Applikationen und auftretenden Nutzerverhaltens N2 - In future telecommunication systems, we observe an increasing diversity of access networks. The separation of transport services and applications or services leads to multi-network services, i.e., a future service has to work transparently to the underlying network infrastructure. Multi-network services with edge-based intelligence, like P2P file sharing or the Skype VoIP service, impose new traffic control paradigms on the future Internet. Such services adapt the amount of consumed bandwidth to reach different goals. A selfish behavior tries to keep the QoE of a single user above a certain level. Skype, for instance, repeats voice samples depending on the perceived end-to-end loss. From the viewpoint of a single user, the replication of voice data overcomes the degradation caused by packet loss and enables to maintain a certain QoE. The cost for this achievement is a higher amount of consumed bandwidth. However, if the packet loss is caused by congestion in the network, this additionally required bandwidth even worsens the network situation. Altruistic behavior, on the other side, would reduce the bandwidth consumption in such a way that the pressure on the network is released and thus the overall network performance is improved. In this monograph, we analyzed the impact of the overlay, P2P, and QoE paradigms in future Internet applications and the interactions from the observing user behavior. The shift of intelligence toward the edge is accompanied by a change in the emerging user behavior and traffic profile, as well as a change from multi-service networks to multi-networks services. In addition, edge-based intelligence may lead to a higher dynamics in the network topology, since the applications are often controlled by an overlay network, which can rapidly change in size and structure as new nodes can leave or join the overlay network in an entirely distributed manner. As a result, we found that the performance evaluation of such services provides new challenges, since novel key performance factors have to be first identified, like pollution of P2P systems, and appropriate models of the emerging user behavior are required, e.g. taking into account user impatience. As common denominator of the presented studies in this work, we focus on a user-centric view when evaluating the performance of future Internet applications. For a subscriber of a certain application or service, the perceived quality expressed as QoE will be the major criterion of the user's satisfaction with the network and service providers. We selected three different case studies and characterized the application's performance from the end user's point of view. Those are (1) cooperation in mobile P2P file sharing networks, (2) modeling of online TV recording services, and (3) QoE of edge-based VoIP applications. The user-centric approach facilitates the development of new mechanisms to overcome problems arising from the changing user behavior. An example is the proposed CycPriM cooperation strategy, which copes with selfish user behavior in mobile P2P file sharing system. An adequate mechanism has also been shown to be efficient in a heterogeneous B3G network with mobile users conducting vertical handovers between different wireless access technologies. The consideration of the user behavior and the user perceived quality guides to an appropriate modeling of future Internet applications. In the case of the online TV recording service, this enables the comparison between different technical realizations of the system, e.g. using server clusters or P2P technology, to properly dimension the installed network elements and to assess the costs for service providers. Technologies like P2P help to overcome phenomena like flash crowds and improve scalability compared to server clusters, which may get overloaded in such situations. Nevertheless, P2P technology invokes additional challenges and different user behavior to that seen in traditional client/server systems. Beside the willingness to share files and the churn of users, peers may be malicious and offer fake contents to disturb the data dissemination. Finally, the understanding and the quantification of QoE with respect to QoS degradations permits designing sophisticated edge-based applications. To this end, we identified and formulated the IQX hypothesis as an exponential interdependency between QoE and QoS parameters, which we validated for different examples. The appropriate modeling of the emerging user behavior taking into account the user's perceived quality and its interactions with the overlay and P2P paradigm will finally help to design future Internet applications. N2 - Applikationen im heutigen Internet werden immer mehr durch intelligente Endknoten bereitgestellt, deren Kommunikation in logischen, virtuellen Netzwerken, (Overlays) realisiert wird. Die verstärkte Diensterbringung durch solche Overlays, wie zum Beispiel bei Peer-to-Peer Dateitauschbörsen oder Telefonie über das Internet, wird durch einen Paradigmenwechsel von Multi-Service Networks zu Multi-Network Services beschrieben. Während in einem Multi-Service Network verschiedene Dienste innerhalb eines Netzes angeboten werden, beschreibt ein Multi-Network Service die Diensterbringung über verschiedene Netze und Netzzugangstechnologien, wie es im Internet der Fall ist. Dadurch kann die technische Güte des Telekommunikationsdienstes (Quality of Service, QoS) nicht mehr die alleinige Metrik für die Qualität eines Dienstes sein. Stattdessen ist die vom Nutzer erfahrene Dienstgüte (User Perceived Quality of Experience, QoE) zu betrachten. Diese QoE muss entsprechend modelliert werden, um die Performanz von heutigen oder auch zukünftigen Internetapplikationen zu beurteilen. Die Berücksichtigung der QoE beinhaltet unter anderem auch neuartige Verhaltensweisen der Teilnehmer, die ebenfalls modelliert werden müssen. Ein Beispiel ist der Dienstabbruch durch ungeduldige Nutzer beim Herunterladen von Filmen oder bei nicht ausreichender Qualität bei Internet-Telefonie. Durch die Verschiebung der Intelligenz von Applikationen in Richtung Endknoten entstehen neu aufkommende Verhaltensweisen der Teilnehmer und sich ändernde Charakteristika des Netzwerkverkehrs, die sie von klassischen Client-Server-Anwendungen unterscheiden. Beispiele hierfür sind egoistisches oder altruistisches Nutzerverhalten bei der Einbringung von Endnutzer-Ressourcen zur Diensterbringung oder auch bösartiges Nutzerverhalten bei der gezielten Störung eines Dienstes (Pollution). In beiden Fällen sind die zeitdynamischen Verhaltensmuster (Churn, Flash Crowds) zu berücksichtigen. Um die ausgedehnten Overlay. Netze zu planen und zu evaluieren, sind überdies auch neue Leistungsbewertungsmodelle notwendig, damit zum Beispiel die Simulation skaliert oder aber auch zeitdynamische Nutzerverhalten in analytischen Modellen abgebildet wird. Diese Doktorarbeit arbeitet diese Aspekte an drei Anwendungsbeispielen auf: Verteilernetz für Dateiinhalte (Content Distribution Network), Netzwerk-basierte Videorekorder (Online TV Recorder) und Sprachtelefonie über P2P (VoP2P). Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Anwendungsbeispiele. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/09 KW - Leistungsbewertung KW - Peer-to-Peer-Netz KW - Dienstgüte KW - Overlay-Netz KW - Mathematische Modellierung KW - BitTorrent KW - Skype KW - Warteschlangentheorie KW - zukünftiges Internet KW - vom Nutzer erfahrene Dienstgüte QoE KW - Multi-Netzwerk Dienste KW - intelligente Applikationen KW - Verteilung von Inhalten KW - Future Internet KW - Quality of Experience QoE KW - Multi-Network Service KW - Edge-based Intelligence KW - Content Distribution Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-37570 ER - TY - CHAP A1 - Ali, Qasim A1 - Montenegro, Sergio T1 - A Simple Approach to Quadrocopter Formation Flying Test Setup for Education and Development T2 - INTED2015 Proceedings N2 - A simple test setup has been developed at Institute of Aerospace Information Technology, University of Würzburg, Germany to realize basic functionalities for formation flight of quadrocopters. The test environment is planned to be utilized for developing and validating the algorithms for formation flying capability in real environment as well as for education purpose. An already existing test bed for single quadrocopter was extended with necessary inter-communication and distributed control mechanism to test the algorithms for formation flights in 2 degrees of freedom (roll / pitch). This study encompasses the domain of communication, control engineering and embedded systems programming. Bluetooth protocol has been used for inter-communication between two quadrocopters. A simple approach of PID control in combination with Kalman filter has been exploited. MATLAB Instrument Control Toolbox has been used for data display, plotting and analysis. Plots can be drawn in real-time and received information can also be stored in the form of files for later use and analysis. The test setup has been developed indigenously and at considerably low cost. Emphasis has been placed on simplicity to facilitate students learning process. Several lessons have been learnt during the course of development of this setup. Proposed setup is quite flexible that can be modified as per changing requirements. KW - Flugkörper KW - Design and Development KW - Formation Flight KW - Instrument Control Toolbox KW - Quadrocopter KW - Unmanned Aerial Vehicle KW - Quadrocopter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114495 SN - 978-84-606-5763-7 SN - 2340-1079 SP - 2776 EP - 2784 PB - International Academy of Technology, Education and Development (IATED) ER - TY - THES A1 - Hartmann, Matthias T1 - Optimization and Design of Network Architectures for Future Internet Routing T1 - Optimierung und Design von Netzwerkarchitekturen für zukünftiges Internet Routing N2 - At the center of the Internet’s protocol stack stands the Internet Protocol (IP) as a common denominator that enables all communication. To make routing efficient, resilient, and scalable, several aspects must be considered. Care must be taken that traffic is well balanced to make efficient use of the existing network resources, both in failure free operation and in failure scenarios. Finding the optimal routing in a network is an NP-complete problem. Therefore, routing optimization is usually performed using heuristics. This dissertation shows that a routing optimized with one objective function is often not good when looking at other objective functions. It can even be worse than unoptimized routing with respect to that objective function. After looking at failure-free routing and traffic distribution in different failure scenarios, the analysis is extended to include the loop-free alternate (LFA) IP fast reroute mechanism. Different application scenarios of LFAs are examined and a special focus is set on the fact that LFAs usually cannot protect all traffic in a network even against single link failures. Thus, the routing optimization for LFAs is targeted on both link utilization and failure coverage. Finally, the pre-congestion notification mechanism PCN for network admission control and overload protection is analyzed and optimized. Different design options for implementing the protocol are compared, before algorithms are developed for the calculation and optimization of protocol parameters and PCN-based routing. The second part of the thesis tackles a routing problem that can only be resolved on a global scale. The scalability of the Internet is at risk since a major and intensifying growth of the interdomain routing tables has been observed. Several protocols and architectures are analyzed that can be used to make interdomain routing more scalable. The most promising approach is the locator/identifier (Loc/ID) split architecture which separates routing from host identification. This way, changes in connectivity, mobility of end hosts, or traffic-engineering activities are hidden from the routing in the core of the Internet and the routing tables can be kept much smaller. All of the currently proposed Loc/ID split approaches have their downsides. In particular, the fact that most architectures use the ID for routing outside the Internet’s core is a poor design, which inhibits many of the possible features of a new routing architecture. To better understand the problems and to provide a solution for a scalable routing design that implements a true Loc/ID split, the new GLI-Split protocol is developed in this thesis, which provides separation of global and local routing and uses an ID that is independent from any routing decisions. Besides GLI-Split, several other new routing architectures implementing Loc/ID split have been proposed for the Internet. Most of them assume that a mapping system is queried for EID-to-RLOC mappings by an intermediate node at the border of an edge network. When the mapping system is queried by an intermediate node, packets are already on their way towards their destination, and therefore, the mapping system must be fast, scalable, secure, resilient, and should be able to relay packets without locators to nodes that can forward them to the correct destination. The dissertation develops a classification for all proposed mapping system architectures and shows their similarities and differences. Finally, the fast two-level mapping system FIRMS is developed. It includes security and resilience features as well as a relay service for initial packets of a flow when intermediate nodes encounter a cache miss for the EID-to-RLOC mapping. N2 - Daten durch das Internet werden heutzutage mit dem paketbasierten Internet Protokoll (IP) übertragen. Dezentralisierte Routingprotokolle innerhalb der einzelnen Netze sorgen für eine zielgerichtete Weiterleitung der einzelnen Pakete. Diese verteilten Protokolle können auch im Fehlerfall weiterarbeiten, benötigen aber mitunter sehr lange bis Daten wieder zuverlässig am Ziel ankommen. Um im Betrieb des Internets eine hohe Leistungsfähigkeit auch bei auftretenden Problemfällen zu gewährleisten, müssen die eingesetzten Protokolle optimal eingestellt werden. Zielfunktionen zur Optimierung paketbasierter Link-State Intradomain-Routingprotokolle: Ein wichtiger Faktor für die Performanz eines Netzes ist die Auswahl der administrativen Linkkosten, anhand derer die Weiterleitungsentscheidungen im Netz getroffen werden. Mit Hilfe von Modellen für Verkehrsaufkommen und für die darunterliegende Netzarchitektur kann mit geeigneten Optimierungsmethoden das Netz für verschiedene Szenarien bestmöglich eingestellt werden. Von besonderer Wichtigkeit ist hierbei die Auswahl der betrachteten Szenarien und Zielfunktionen für die Optimierung. Eine Routingkonfiguration die optimal für ein bestimmtes Ziel ist, kann beliebig schlecht für ein anderes Ziel sein. Zum Beispiel kann eine Konfiguration, die eine besonders hohe Fehlerabdeckung erreicht, zu einer sehr schlechten Verkehrsverteilung führen. Im Rahmen der Dissertation werden heuristische Optimierungen des Routings für verschiedene Protokolle und Anwendungsszenarien durchgeführt. Darüber hinaus wird eine Pareto-Optimierung implementiert, die gleichzeitig mehrere Ziele optimieren kann. Die Analysen werden zuerst für normales Routing im fehlerfreien Fall und für Fehlerszenarien durchgeführt. Daraufhin werden verschiedenste Anwendungsfälle des IP Fast-Reroute Mechanismus Loop-Free Alternates (LFA) betrachtet. Hier wird insbesondere auf die Problematik eingegangen, dass LFAs in Abhängigkeit vom eingestellten Routing in bestimmten Fehlerfällen nicht angewendet werden können. Beim Optimieren des Routings muss hier zusätzlich zur Lastverteilung auch noch die Maximierung der Fehlerabdeckung berücksichtigt werden. Schließlich folgt eine Untersuchung und Optimierung des Pre-Congestion Notification (PCN) Verfahren zur Netzzugangskontrolle und Überlaststeuerung. Hier werden verschiedene Architekturvarianten des Protokolls miteinander verglichen und Algorithmen zur Berechnung und Optimierung wichtiger Parameter des Protokolls entwickelt. Das Wachstum der Routingtabellen im Kern des Internets droht zu einem Skalierbarkeitsproblem zu werden. Ein Grund für diese Problematik ist die duale Funktion der IP-Adresse. Sie wird einerseits zur Identifikation eines Geräts benutzt und andererseits zur Weiterleitung der Daten zu diesem Gerät. Neue Mechanismen und Protokolle die eine Trennung zwischen den beiden Funktionalitäten der IP-Adresse ermöglichen sind potentielle Kandidaten für eine bessere Skalierbarkeit des Internetroutings und damit für die Erhaltung der Funktionalität des Internets. Design eines neuen Namens- und Routingprotokolls für skalierbares Interdomain-Routing: In der Dissertation werden grundlegende Eigenschaften die zu diesem Problem führen erörtert. Daraufhin werden vorhandene Ansätze zur Verbesserung der Skalierbarkeit des Internetroutings analysiert, und es werden Gemeinsamkeiten wie auch Schwachstellen identifiziert. Auf dieser Basis wird dann ein Protokoll entwickelt, das eine strikte Trennung zwischen Identifikationsadressen (IDs) und routebaren Locator-Adressen einhält. Das GLI-Split genannte Protokoll geht dabei über den einfachen Split von vorhandenen Architekturvorschlägen hinaus und führt eine weitere Adresse ein die nur für das lokale Routing innerhalb eines Endkunden-Netzes benutzt wird. Hierdurch wird die ID eines Endgeräts vollständig unabhängig vom Routing. Durch das GLI-Split Protokoll kann das globale Routing wieder skalierbar gemacht werden. Zusätzlich bietet es viele Vorteile für Netze die das Protokoll einführen, was als Anreiz nötig ist um den Einsatz eines neuen Protokolls zu motivieren. Solch ein Identifier/Locator Split Protokoll benötigt ein Mappingsystem um die Identifier der Endgeräte in routebare Locator-Adressen zu übersetzen. Im letzten Teil der Dissertation wird eine mehrstufige Mapping-Architektur namens FIRMS entwickelt. Über ein hierarchisches Verteilungssystem, das die Adressvergabestruktur der fünf Regionalen Internet Registrare (RIRs) und der darunterliegenden Lokalen Internet Registrare (LIRs) abbildet, werden die erforderlichen Zuordnungstabellen so verteilt, dass jederzeit schnell auf die benötigten Informationen zugegriffen werden kann. Hierbei wird auch besonders auf Sicherheitsaspekte geachtet. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/15 KW - Netzwerk KW - Routing KW - Optimierung KW - Netzwerkmanagement KW - Optimization KW - Future Internet Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114165 SN - 1432-8801 ER - TY - JOUR A1 - Gageik, Nils A1 - Strohmeier, Michael A1 - Montenegro, Sergio T1 - Waypoint flight parameter comparison of an autonomous UAV JF - International Journal of Artificial Intelligence & Applications (IJAIA) N2 - The present paper compares the effect of different waypoint parameters on the flight performance of a special autonomous indoor UAV (unmanned aerial vehicle) fusing ultrasonic, inertial, pressure and optical sensors for 3D positioning and controlling. The investigated parameters are the acceptance threshold for reaching a waypoint as well as the maximal waypoint step size or block size. The effect of these parameters on the flight time and accuracy of the flight path is investigated. Therefore the paper addresses how the acceptance threshold and step size influence the speed and accuracy of the autonomous flight and thus influence the performance of the presented autonomous quadrocopter under real indoor navigation circumstances. Furthermore the paper demonstrates a drawback of the standard potential field method for navigation of such autonomous quadrocopters and points to an improvement. KW - autonomous UAV KW - Quadrocopter KW - Quadrotor KW - waypoint parameter KW - navigation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96833 ER - TY - JOUR A1 - Gageik, Nils A1 - Strohmeier, Michael A1 - Montenegro, Sergio T1 - An Autonomous UAV with an Optical Flow Sensor for Positioning and Navigation JF - International Journal of Advanced Robotic Systems N2 - A procedure to control all six DOF (degrees of freedom) of a UAV (unmanned aerial vehicle) without an external reference system and to enable fully autonomous flight is presented here. For 2D positioning the principle of optical flow is used. Together with the output of height estimation, fusing ultrasonic, infrared and inertial and pressure sensor data, the 3D position of the UAV can be computed, controlled and steered. All data processing is done on the UAV. An external computer with a pathway planning interface is for commanding purposes only. The presented system is part of the AQopterI8 project, which aims to develop an autonomous flying quadrocopter for indoor application. The focus of this paper is 2D positioning using an optical flow sensor. As a result of the performed evaluation, it can be concluded that for position hold, the standard deviation of the position error is 10cm and after landing the position error is about 30cm. KW - Autonomous UAV KW - Quadrocopter KW - Quadrotor KW - Optical Flow KW - positioning KW - navigation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96368 ER - TY - THES A1 - Herrmann, Christian T1 - Robotic Motion Compensation for Applications in Radiation Oncology T1 - Robotergestützte Bewegungskompensation für Anwendungen in der Radioonkologie N2 - Aufgrund vieler Verbesserungen der Behandlungsmethoden im Laufe der letzten 60 Jahre, erlaubt die Strahlentherapie heutzutage präzise Behandlungen von statischen Tumoren. Jedoch birgt die Bestrahlung von sich bewegenden Tumoren noch große Herausforderungen in sich, da bewegliche Tumore oft den Behandlungsstrahl verlassen. Dabei reduziert sich die Strahlendosis im Tumor während sich diese im umliegenden gesunden Gewebe erhöht. Diese Forschungsarbeit zielt darauf ab, die Grenzen der Strahlentherapie zu erweitern, um präzise Behandlungen von beweglichen Tumoren zu ermöglichen. Der Fokus der Arbeit liegt auf der Erstellung eines Echtzeitsystems zur aktiven Kompensation von Tumorbewegungen durch robotergestützte Methoden. Während Behandlungen befinden sich Patienten auf einer Patientenliege, mit der statische Lagerungsfehler vor Beginn einer Behandlung korrigiert werden. Die in dieser Arbeit verwendete Patientenliege "HexaPOD" ist ein paralleler Manipulator mit sechs Freiheitsgraden, der große Lasten innerhalb eines eingeschränkten Arbeitsbereichs präzise positionieren kann. Obwohl der HexaPOD ursprünglich nicht für dynamische Anwendungen konzipiert wurde, wird dieser für eine dauerhafte Bewegungskompensation eingesetzt, in dem Patienten so bewegt werden, dass Tumore präzise im Zentralstrahl während der Dauer einer gesamten Behandlung verbleiben. Um ein echtzeitfähiges Kompensationssystem auf Basis des HexaPODs zu realisieren, muss eine Reihe an Herausforderungen bewältigt werden. Echtzeitaspekte werden einerseits durch die Verwendung eines harten Echtzeitbetriebssystems abgedeckt, andererseits durch die Messung und Schätzung von Latenzzeiten aller physikalischen Größen im System, z.B. Messungen der Tumor- und Atemposition. Neben der konsistenten und durchgängigen Berücksichtigung von akkuraten Zeitinformation, werden alle software-induzierten Latenzen adaptiv ausgeglichen. Dies erfordert Vorhersagen der Tumorposition in die nahe Zukunft. Zahlreiche Prädiktoren zur Atem- und Tumorpositionsvorhersage werden vorgeschlagen und anhand verschiedenster Metriken evaluiert. Erweiterungen der Prädiktionsalgorithmen werden eingeführt, die sowohl Atem- als auch Tumorpositionsinformationen fusionieren, um Vorhersagen ohne explizites Korrelationsmodell zu ermöglichen. Die Vorhersagen bestimmen den zukünftigen Bewegungspfad des HexaPODs, um Tumorbewegungen zu kompensieren. Dazu werden verschiedene Regler entwickelt, die eine Trajektorienverfolgung mit dem HexaPOD ermöglichen. Auf der Basis von linearer und nicht-linearer dynamischer Modellierung des HexaPODs mit Methoden der Systemidentifikation, wird zunächst ein modellprädiktiver Regler entwickelt. Ein zweiter Regler wird auf Basis einer Annahme über das Arbeitsprinzip des internen Reglers im HexaPOD entworfen. Schließlich wird ein dritter Regler vorgeschlagen, der beide vorhergehenden Regler miteinander kombiniert. Für jeden dieser Regler werden vergleichende Ergebnisse aus Experimenten mit realer Hardware und menschlichen Versuchspersonen präsentiert und diskutiert. Darüber hinaus wird die geeignete Wahl von freien Parametern in den Reglern vorgestellt. Neben einer präzisen Verfolgung der Referenztrajektorie spielt der Patientenkomfort eine entscheidende Rolle für die Akzeptanz des Systems. Es wird gezeigt, dass die Regler glatte Trajektorien realisieren können, um zu garantieren, dass sich Patienten wohl fühlen während ihre Tumorbewegung mit Genauigkeiten im Submillimeterbereich ausgeglichen wird. Gesamtfehler werden im Kompensationssystem analysiert, in dem diese zu Trajektorienverfolgungsfehlern und Prädiktionsfehlern in Beziehung gesetzt werden. Durch Ausnutzung von Eigenschaften verschiedener Prädiktoren wird gezeigt, dass die Startzeit des Systems bis die Verfolgung der Referenztrajektorie erreicht ist, wenige Sekunden beträgt. Dies gilt insbesondere für den Fall eines initial ruhenden HexaPODs und ohne Vorwissen über Tumorbewegungen. Dies zeigt die Eignung des Systems für die sehr kurz fraktionierten Behandlungen von Lungentumoren. Das Tumorkompensationssystem wurde ausschließlich auf Basis von klinischer Standard-Hardware entwickelt, die in vielen Behandlungsräumen zu finden ist. Durch ein einfaches und flexibles Design können Behandlungsräume in kosteneffizienter Weise um Möglichkeiten der Bewegungskompensation ergänzt werden. Darüber hinaus werden aktuelle Behandlungsmethoden wie intensitätsmodulierte Strahlentherapie oder Volumetric Modulated Arc Therapy in keiner Weise eingeschränkt. Aufgrund der Unterstützung verschiedener Kompensationsmodi kann das System auf alle beweglichen Tumore angewendet werden, unabhängig davon ob die Bewegungen vorhersagbar (Lungentumore) oder nicht vorhersagbar (Prostatatumore) sind. Durch Integration von geeigneten Methoden zur Tumorpositionsbestimmung kann das System auf einfache Weise zur Kompensation von anderen Tumoren erweitert werden. N2 - Radiation therapy today, on account of improvements in treatment procedures over the last 60 years, allows precise treatment of static tumors inside the human body. However, irradiation of moving tumors is still a challenging task as moving tumors often leave the treatment beam and the radiation dose delivered to the tumor reduces simultaneously increasing that on healthy tissue. This research work aims to push the frontiers of radiation therapy in order to enable precise treatment of moving tumors with focus on research and development of a unique real-time system enabling active motion compensation through robotic means to compensate tumor motion. During treatment, patients lie on a treatment couch which is normally used for static position corrections of patient set-up errors prior to radiation treatment. The treatment couch used, called HexaPOD, is a parallel manipulator with six degrees of freedom which can precisely position heavy loads inside a small region. Despite the HexaPOD not initially built with dynamics in mind, it is used in this work for sustained motion compensation by moving patients such that tumors stay precisely located at the center of the treatment beam during the complete course of treatment. In order to realize real-time tumor motion compensation by means of the HexaPOD, several challanges need to be addressed. Real-time aspects are covered by the adoption of a hard real-time operation system in combination with measurement and estimation of latencies of all physical quantities in the compensation system such as tumor or breathing position measurements. Accurate timing information is respected consistently in the whole system and all software-induced latencies are adaptively compensated for. This requires knowledge of future tumor positions from predictors. Several predictors for breathing and tumor motion predictions are proposed and evaluated in terms of a variety of different performance metrics. Extensions to prediction algorithms are introduced fusing both breathing and tumor position information to allow for predictions without the need of an explicit correlation model. Predictions determine the future motion path of the HexaPOD in order to compensate for tumor motion. Several control schemes are developed to enable reference tracking for the HexaPOD. Based on linear and non-linear dynamic modelling of the HexaPOD with system identification methods, a first controller is derived in the form of a model predictive controller. A second controller is proposed based on an assumption of the working principle of the HexaPOD's internal controller. Finally, a third controller is derived as combination of the first and second one. For each of these controllers, comparative results with real hardware experiments and humans in the loop as well as choices of free parameters are presented and discussed. Apart from precise tracking, emphasis is placed on patient comfort which is of crucial importance for acceptance of the system. It is demonstrated that smooth trajectories can be realized by the controllers to guarantee that patients feel comfortable while their tumor motion is compensated at sub-millimeter accuracies. Overall errors of the system are analyzed by relating them to tracking and prediction errors. By exploiting the properties of different predictors, it is shown that the startup time until tracking is reached can be reduced to only a few seconds, even in the case of an initially at-rest HexaPOD and with no initial knowledge of tumor motion. This makes the system especially suitable for the relatively short-fractionated treatment sessions for lung tumors. The tumor motion compensation system has been developed solely based on standard clinical hardware, found in most treatment rooms. With a simple and flexible design, existing treatment can be updated in a cost-efficient way to introduce motion compensation capabilities. Simultaneously, the system does not impose any constraints on state-of-the-art treatment types such as intensity modulated radiotherapy or volumetric modulated arc therapy. Supporting different compensation modes, the system can be applied to any moving tumor whether its motion is predictable (lung tumors) or unpredictable (prostate tumors). By integration of adequate tumor position determination methods, the system can be easily extended to other tumors as well. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 7 KW - Robotik KW - Bewegungskompensation KW - Regelung KW - Strahlentherapie KW - Vorhersage KW - Tumorbewegung KW - Echzeit KW - Prediction KW - Tumor motion KW - Real-time Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79045 SN - 978-3-923959-88-4 ER - TY - THES A1 - Reith, Steffen T1 - Generalized Satisfiability Problems T1 - Verallgemeinerte Erfüllbarkeitsprobleme N2 - In the last 40 years, complexity theory has grown to a rich and powerful field in theoretical computer science. The main task of complexity theory is the classification of problems with respect to their consumption of resources (e.g., running time or required memory). To study the computational complexity (i.e., consumption of resources) of problems, similar problems are grouped into so called complexity classes. During the systematic study of numerous problems of practical relevance, no efficient algorithm for a great number of studied problems was found. Moreover, it was unclear whether such algorithms exist. A major breakthrough in this situation was the introduction of the complexity classes P and NP and the identification of hardest problems in NP. These hardest problems of NP are nowadays known as NP-complete problems. One prominent example of an NP-complete problem is the satisfiability problem of propositional formulas (SAT). Here we get a propositional formula as an input and it must be decided whether an assignment for the propositional variables exists, such that this assignment satisfies the given formula. The intensive study of NP led to numerous related classes, e.g., the classes of the polynomial-time hierarchy PH, P, #P, PP, NL, L and #L. During the study of these classes, problems related to propositional formulas were often identified to be complete problems for these classes. Hence some questions arise: Why is SAT so hard to solve? Are there modifications of SAT which are complete for other well-known complexity classes? In the context of these questions a result by E. Post is extremely useful. He identified and characterized all classes of Boolean functions being closed under superposition. It is possible to study problems which are connected to generalized propositional logic by using this result, which was done in this thesis. Hence, many different problems connected to propositional logic were studied and classified with respect to their computational complexity, clearing the borderline between easy and hard problems. N2 - In den letzten 40 Jahren hat sich die Komplexitätstheorie zu einem reichen und mächtigen Gebiet innerhalb der theoretischen Informatik entwickelt. Dabei ist die hauptsächliche Aufgabenstellung der Komplexitätstheorie die Klassifikation von Problemen bezüglich des Bedarfs von Rechenzeit oder Speicherplatz zu ihrer Lösung. Um die Komplexität von Problemen (d.h. den Bedarf von Resourcen) einzuordnen, werden Probleme mit ähnlichem Ressourcenbedarf in gleiche sogenannte Komplexitätsklassen einsortiert. Bei der systematischen Untersuchung einer Vielzahl von praktisch relevanten Problemen wurden jedoch keine effizienten Algorithmen für viele der untersuchten Probleme gefunden und es ist unklar, ob solche Algorithmen überhaupt existieren. Ein Durchbruch bei der Untersuchung dieser Problematik war die Einführung der Komplexitätsklassen P und NP und die Identifizierung von schwersten Problemen in NP. Diese schwierigsten Probleme von NP sind heute als sogenannte NP-vollständige Probleme bekannt. Ein prominentes Beispiel für ein NP-vollständiges Problem ist das Erfüllbarkeitsproblem für aussagenlogische Formeln (SAT). Hier ist eine aussagenlogische Formel als Eingabe gegeben und es muss bestimmt werden, ob eine Belegung der Wahrheitswertevariablen existiert, so dass diese Belegung die gegebene Formel erfüllt. Das intensive Studium der Klasse NP führte zu einer Vielzahl von anderen Komplexitätsklassen, wie z.B. die der Polynomialzeithierarchie PH, P, #P, PP, NL, L oder #L. Beim Studium dieser Klassen wurden sehr oft Probleme im Zusammenhang mit aussagenlogischen Formeln als schwierigste (vollständige) Probleme für diese Klassen identifiziert. Deshalb stellt sich folgende Frage: Welche Eigenschaften des Erfüllbarkeitsproblems SAT bewirken, dass es eines der schwersten Probleme der Klasse NP ist? Gibt es Einschränkungen oder Verallgemeinerungen des Erfüllbarkeitsproblems, die vollständig für andere bekannte Komplexitätsklassen sind? Im Zusammenhang mit solchen Fragestellungen ist ein Ergebnis von E. Post von extremem Nutzen. Er identifizierte und charakterisierte alle Klassen von Booleschen Funktionen, die unter Superposition abgeschlossen sind. Mit Hilfe dieses Resultats ist es möglich, Probleme im Zusammenhang mit verallgemeinerten Aussagenlogiken zu studieren, was in der vorliegenden Arbeit durchgeführt wurde. Dabei wurde eine Vielzahl von verschiedenen Problemen, die in Zusammenhang mit der Aussagenlogik stehen, studiert und bezüglich ihrer Komplexität klassifiziert. Dadurch wird die Grenzlinie zwischen einfach lösbaren Problemen und schweren Problemen sichtbar. KW - Erfüllbarkeitsproblem KW - Komplexitätstheorie KW - Boolesche Funktionen KW - Isomorphie KW - abgeschlossene Klassen KW - Zählprobleme KW - Computational complexity KW - Boolean functions KW - Boolean isomorphism KW - Boolean equivalence KW - Dichotomy KW - counting problems Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74 ER -