TY - THES A1 - Mäder, Andreas T1 - Performance Models for UMTS 3.5G Mobile Wireless Systems T1 - Leistungsmodelle für UMTS 3.5G Mobilfunksysteme N2 - Mobile telecommunication systems of the 3.5th generation (3.5G) constitute a first step towards the requirements of an all-IP world. As the denotation suggests, 3.5G systems are not completely new designed from scratch. Instead, they are evolved from existing 3G systems like UMTS or cdma2000. 3.5G systems are primarily designed and optimized for packet-switched best-effort traffic, but they are also intended to increase system capacity by exploiting available radio resources more efficiently. Systems based on cdma2000 are enhanced with 1xEV-DO (EV-DO: evolution, data-optimized). In the UMTS domain, the 3G partnership project (3GPP) specified the High Speed Packet Access (HSPA) family, consisting of High Speed Downlink Packet Access (HSDPA) and its counterpart High Speed Uplink Packet Access (HSUPA) or Enhanced Uplink. The focus of this monograph is on HSPA systems, although the operation principles of other 3.5G systems are similar. One of the main contributions of our work are performance models which allow a holistic view on the system. The models consider user traffic on flow-level, such that only on significant changes of the system state a recalculation of parameters like bandwidth is necessary. The impact of lower layers is captured by stochastic models. This approach combines accurate modeling and the ability to cope with computational complexity. Adopting this approach to HSDPA, we develop a new physical layer abstraction model that takes radio resources, scheduling discipline, radio propagation and mobile device capabilities into account. Together with models for the calculation of network-wide interference and transmit powers, a discrete-event simulation and an analytical model based on a queuing-theoretical approach are proposed. For the Enhanced Uplink, we develop analytical models considering independent and correlated other-cell interference. N2 - Die vorliegende Arbeit beschäftigt sich mit Mobilfunksystemen der Generation 3.5 im Allgemeinen, und mit den UMTS-spezifischen Ausprägungen HSDPA (High Speed Downlink Packet Access) und HSUPA (High Speed Uplink Packet Access) bzw. Enhanced Uplink im speziellen. Es werden integrierte Systeme betrachtet, d.h. 3.5G Datenkanäle koexistieren mit "klassischen" UMTS Datenkanälen wie in den Spezifikationen von UMTS Release ´99 beschrieben. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/08 KW - Mobilfunk KW - Leistungsbewertung KW - UMTS KW - HSPA KW - Funkressourcenverwaltung KW - Modellierungstechniken KW - Netzwerkplanung KW - UMTS KW - HSPA KW - radio resource management KW - modeling techniques KW - network planning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32525 ER - TY - THES A1 - Milbrandt, Jens T1 - Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks T1 - Effiziente Konzepte und Leistungsbewertung zum Ressourcen Management in zukünftigen IP Netzen N2 - Next generation networks (NGNs) must integrate the services of current circuit-switched telephone networks and packet-switched data networks. This convergence towards a unified communication infrastructure necessitates from the high capital expenditures (CAPEX) and operational expenditures (OPEX) due to the coexistence of separate networks for voice and data. In the end, NGNs must offer the same services as these legacy networks and, therefore, they must provide a low-cost packet-switched solution with real-time transport capabilities for telephony and multimedia applications. In addition, NGNs must be fault-tolerant to guarantee user satisfaction and to support business-critical processes also in case of network failures. A key technology for the operation of NGNs is the Internet Protocol (IP) which evolved to a common and well accepted standard for networking in the Internet during the last 25 years. There are two basically different approaches to achieve QoS in IP networks. With capacity overprovisioning (CO), an IP network is equipped with sufficient bandwidth such that network congestion becomes very unlikely and QoS is maintained most of the time. The second option to achieve QoS in IP networks is admission control (AC). AC represents a network-inherent intelligence that admits real-time traffic flows to a single link or an entire network only if enough resources are available such that the requirements on packet loss and delay can be met. Otherwise, the request of a new flow is blocked. This work focuses on resource management and control mechanisms for NGNs, in particular on AC and associated bandwidth allocation methods. The first contribution consists of a new link-oriented AC method called experience-based admission control (EBAC) which is a hybrid approach dealing with the problems inherent to conventional AC mechanisms like parameter-based or measurement-based AC (PBAC/MBAC). PBAC provides good QoS but suffers from poor resource utilization and, vice versa, MBAC uses resources efficiently but is susceptible to QoS violations. Hence, EBAC aims at increasing the resource efficiency while maintaining the QoS which increases the revenues of ISPs and postpones their CAPEX for infrastructure upgrades. To show the advantages of EBAC, we first review today’s AC approaches and then develop the concept of EBAC. EBAC is a simple mechanism that safely overbooks the capacity of a single link to increase its resource utilization. We evaluate the performance of EBAC by its simulation under various traffic conditions. The second contribution concerns dynamic resource allocation in transport networks which implement a specific network admission control (NAC) architecture. In general, the performance of different NAC systems may be evaluated by conventional methods such as call blocking analysis which has often been applied in the context of multi-service asynchronous transfer mode (ATM) networks. However, to yield more practical results than abstract blocking probabilities, we propose a new method to compare different AC approaches by their respective bandwidth requirements. To present our new method for comparing different AC systems, we first give an overview of network resource management (NRM) in general. Then we present the concept of adaptive bandwidth allocation (ABA) in capacity tunnels and illustrate the analytical performance evaluation framework to compare different AC systems by their capacity requirements. Different network characteristics influence the performance of ABA. Therefore, the impact of various traffic demand models and tunnel implementations, and the influence of resilience requirements is investigated. In conclusion, the resources in NGNs must be exclusively dedicated to admitted traffic to guarantee QoS. For that purpose, robust and efficient concepts for NRM are required to control the requested bandwidth with regard to the available transmission capacity. Sophisticated AC will be a key function for NRM in NGNs and, therefore, efficient resource management concepts like experience-based admission control and adaptive bandwidth allocation for admission-controlled capacity tunnels, as presented in this work are appealing for NGN solutions. N2 - In meiner Dissertation zum Thema “Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks” werden im Wesentlichen zwei miteinander verwobene Konzepte zur effizienten Nutzung von Übertragungsressourcen in zukünftigen IP Netzen untersucht. Das Management solcher Ressourcen ist zur Unterstützung qualitativ hochwertiger Netzdiensten (z.B. IP Telephonie, IP TV, etc.) in Zukunft unabdingbar. Gegenwärtig werden diese Dienste durch den Einsatz hoher Übertragungskapazitäten (engl. capacity overprovisioning) in den IP Breitbandnetzen ermöglicht. Um in Spitzenlastzeiten die Qualität der Dienste aufrecht zu erhalten, sind die Bandbreiten derart hoch angesetzt, dass unter normalen Umständen die Ressourcen nur sehr schwach ausgelastet sind (im Bereich zwischen 10 und 30 Prozent). Diese Überdimensionierungslösung ist einfach zu realisieren aber auch sehr kostenintensiv, ineffizient und vor allem nicht (zukunfts-)sicher, da bei ständig steigendem Bandbreitenbedarf, die Netzkapazitäten häufig angepasst werden müssen. Eine Effizienzsteigerung bei der Ressourcennutzung in heutigen Kommunikationsnetzen ist daher ein wichtiges Kriterium für die Wirtschaftlichkeit zukünftiger IP Netze. Erreicht werden kann dies mit den Mitteln der Netzzugangskontrolle (engl. admission control, kurz AC), welche bereits in verschiedenen Formen entwickelt, untersucht und teilweise auch in heutigen IP Netzen realisiert ist. Die AC stellt eine vergleichsweise komplexe Lösung zur Aufrechterhaltung der Dienstgüte in IP Netzen dar. Daher sind einfache und effiziente Mechanismen/Automatismen zur Durchführung der AC gefordert, um deren Einsatz an Stelle der Überdimensionierung zu rechtfertigen. Den zuvor genannten Forderungen nach effizienter Ressourcennutzung entsprechend stellt der erste Hauptbeitrag der Dissertation einen neuen Ansatz zur AC dar, die so genannte erfahrungsbasierte Netzzugangskontrolle (engl. experience-based admission control, kurz EBAC). Gegenüber den existierenden alternativen, d.h. parameter- oder mess-basierten Verfahren der AC zeichnet sich die EBAC durch effiziente Ressourcennutzung und begünstigt gleichzeitig die Aufrechterhaltung der Dienstgüte. Die genaue Funktionsweise der EBAC und die simulative Leistungsuntersuchung sind in der Dissertation nachzulesen. Der zweite Themenschwerpunkt der Dissertation greift eine tunnel-basierte Netzarchitektur auf und präsentiert mit deren Hilfe eine neue Methode zur Bewertung verschiedener Bandbreitenallokationsstrategien in Kombination mit AC. Die neue Bewertungsmethode wird zwar anhand einer speziellen tunnel-basierten AC untersucht, lässt sich aber auf alle Arten so genannter budget-basierter AC anwenden. Bei der konventionellen Leistungsbewertung verschiedener AC-Systeme dienen abstrakte Blockierungswahrscheinlichkeiten als Leistungsmaß. Im Gegensatz hierzu, bewertet die neue Methode die Leistung eines AC-Systems anhand des zugehörigen Bandbreitenbedarfs in Abhängigkeit verschiedener Einflussfaktoren, z.B. der avisierten Blockierwahrscheinlichkeit des AC-Systems, der Verkehrszusammensetzung, des Verkehrsvolumens, der Verkehrsdynamik und vor allem der angewandten Bandbreitenallokationsstrategie. In zukünftigen IP Netzen müssen die Ressourcen zur Datenübertragung besser verwaltet und kontrolliert werden. Zugelassener Verkehr mit hohen Dienstgüteanforderungen muss exklusiv Bandbreite zugewiesen werden, um die geforderte Dienstgüte garantieren zu können. Um dieses Ziel zu erreichen werden robuste und effiziente Konzepte zum Management von Netzressourcen benötigt. Intelligenter Netzzugangskontrolle wird eine Schlüsselfunktion in zukünftigen IP Netzen zukommen. Die in dieser Dissertation vorgestellten, effizienten Ressourcenmanagementkonzepte „erfahrungsbasierte Netzzugangskontrolle“ und „adaptive Bandbreitenallokation in zugangskontrollierten Kapazitätstunnel“ tragen zum Erreichen dieses Ziels bei. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/07 KW - Ressourcenmanagement KW - Leistungsbewertung KW - Rechnernetz KW - IP KW - Ressourcen Management KW - Leistungsbewertung KW - zukünftige Kommunikationsnetze KW - Resource Management KW - Performance Analysis KW - Next Generation Networks Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23332 ER - TY - RPRT A1 - Metzger, Florian T1 - Crowdsensed QoE for the community - a concept to make QoE assessment accessible N2 - In recent years several community testbeds as well as participatory sensing platforms have successfully established themselves to provide open data to everyone interested. Each of them with a specific goal in mind, ranging from collecting radio coverage data up to environmental and radiation data. Such data can be used by the community in their decision making, whether to subscribe to a specific mobile phone service that provides good coverage in an area or in finding a sunny and warm region for the summer holidays. However, the existing platforms are usually limiting themselves to directly measurable network QoS. If such a crowdsourced data set provides more in-depth derived measures, this would enable an even better decision making. A community-driven crowdsensing platform that derives spatial application-layer user experience from resource-friendly bandwidth estimates would be such a case, video streaming services come to mind as a prime example. In this paper we present a concept for such a system based on an initial prototype that eases the collection of data necessary to determine mobile-specific QoE at large scale. In addition we reason why the simple quality metric proposed here can hold its own. KW - Quality of Experience KW - Crowdsourcing KW - Crowdsensing KW - QoE Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203748 N1 - Originally written in 2017, but never published. ER - TY - THES A1 - Menth, Michael T1 - Efficient admission control and routing for resilient communication networks T1 - Effiziente Zugangskontrolle und Verkehrslenkung für ausfallsichere Kommunikationsnetze N2 - This work is subdivided into two main areas: resilient admission control and resilient routing. The work gives an overview of the state of the art of quality of service mechanisms in communication networks and proposes a categorization of admission control (AC) methods. These approaches are investigated regarding performance, more precisely, regarding the potential resource utilization by dimensioning the capacity for a network with a given topology, traffic matrix, and a required flow blocking probability. In case of a failure, the affected traffic is rerouted over backup paths which increases the traffic rate on the respective links. To guarantee the effectiveness of admission control also in failure scenarios, the increased traffic rate must be taken into account for capacity dimensioning and leads to resilient AC. Capacity dimensioning is not feasible for existing networks with already given link capacities. For the application of resilient NAC in this case, the size of distributed AC budgets must be adapted according to the traffic matrix in such a way that the maximum blocking probability for all flows is minimized and that the capacity of all links is not exceeded by the admissible traffic rate in any failure scenario. Several algorithms for the solution of that problem are presented and compared regarding their efficiency and fairness. A prototype for resilient AC was implemented in the laboratories of Siemens AG in Munich within the scope of the project KING. Resilience requires additional capacity on the backup paths for failure scenarios. The amount of this backup capacity depends on the routing and can be minimized by routing optimization. New protection switching mechanisms are presented that deviate the traffic quickly around outage locations. They are simple and can be implemented, e.g, by MPLS technology. The Self-Protecting Multi-Path (SPM) is a multi-path consisting of disjoint partial paths. The traffic is distributed over all faultless partial paths according to an optimized load balancing function both in the working case and in failure scenarios. Performance studies show that the network topology and the traffic matrix also influence the amount of required backup capacity significantly. The example of the COST-239 network illustrates that conventional shortest path routing may need 50% more capacity than the optimized SPM if all single link and node failures are protected. N2 - Diese Arbeit gliedert sich in zwei Hauptteile: Ausfallsichere Zugangskontrolle und ausfallsichere Verkehrslenkung. Die Arbeit beschreibt zu Beginn den Stand der Technik für Dienstgütemechanismen in Kommunikationsnetzen und nimmt eine Kategorisierung von Zugangskontrollmethoden vor. Diese Ansätze werden hinsichtlich ihrer potentiellen Auslastung der Leitungskapaztitäten untersucht, indem die Kapazität für ein Netz mit gegebnener Topology, Verkehrsmatrix und geforderten Flussblockierwahrscheinlichkeiten dimensioniert wird. Im Falle eines Fehlers werden betroffene Flüsse automatisch über Ersatzpfade umgeleitet, was die Verkehrslast auf deren Übertragungsleitungen erhöht. Um die Wirksamkeit der Zugangskontrolle auch in Fehlerfällen zu gewährleisten, muss diese erhöhte Verkehrslast bei der Dimensionierung berücksichtigt werden, was zu einer ausfallsicheren Zugangskontrolle führt. Kapazitätsdimensionierung ist in bereits existierenden Netzen mit festen Linkbandbreiten nicht mehr möglich. Für die Anwendung von ausfallsicherer Zugangskontrolle in diesem Fall muss die Größe von verteilten Zugangskontrollbudgets gemäß der Verkehrsmatrix so angepasst werden, dass die maximale Blockierwahrscheinlichkeit aller Flüsse minimiert wird und die Kapazität aller Links in keinem Fehlerfall durch die zulässige Verkehrrate überschritten wird. Es werden unterschiedliche Algorithmen für die Lösung dieses Problems vorgeschlagen und hinsichtlich ihrer Effizienz und Fairness verglichen. Ein Prototyp für ausfallsichere Zugangskontrolle wurde im Rahmen des KING-Projektes in den Labors der Siemens AG in München implementiert. Ausfallsicherheit benötigt Zusatzkapazitäten auf den Ersatzpfaden für Fehlerfälle. Die Menge der Zusatzkapazität hängt von der Verkehrslenkung ab und kann durch Optimierung verringert werden. Es werden neue Mechanismen für Ersatzschaltungen vorgestellt, die den Verkehr schnell um Fehlerstellen im Netz herumleiten können. Sie zeichnen sich durch ihre Einfachheit aus und können z.B. in MPLS-Technologie implementiert werden. Der "Self-Protecting Multi-Path" (SPM) ist ein Multipfad, der aus disjunkten Teilpfaden besteht. Der Verkehr wird sowohl im Normalbetrieb als auch in Ausfallszenarien über alle intakten Teilpfade gemäß einer optimierten Lastverteilungsfunktion weitergeleitet. Leistungsuntersuchungen zeigen, dass die Menge an benötigter Zusatzkapazität deutlich von der Netztopologie und der Verkehrsmatrix abhängt. Das Beispiel des COST-239 Netzes veranschaulicht, dass herkömmliche Verkehrslenkung auf den kürzesten Wegen 50% mehr Kapazität benötigen kann als der optimierte SPM, wenn alle einzelnen Übertragungsleitungs- und Vermittlungsknotenausfälle geschützt werden. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/04 KW - Kommunikation KW - Netzwerk KW - Ausfallsicheres System KW - Kommunikationsnetze KW - Ausfallsicherheit KW - Zugangskontrolle KW - Verkehrslenkung KW - Communication Networks KW - Resilience KW - Admission Control KW - Routing Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9949 ER - TY - RPRT A1 - Mazigh, Sadok Mehdi A1 - Beausencourt, Marcel A1 - Bode, Max Julius A1 - Scheffler, Thomas T1 - Using P4-INT on Tofino for Measuring Device Performance Characteristics in a Network Lab T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper presents a prototypical implementation of the In-band Network Telemetry (INT) specification in P4 and demonstrates a use case, where a Tofino Switch is used to measure device and network performance in a lab setting. This work is based on research activities in the area of P4 data plane programming conducted at the network lab of HTW Berlin. KW - P4-INT Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322084 ER - TY - RPRT A1 - Martino, Luigi A1 - Deutschmann, Jörg A1 - Hielscher, Kai-Steffen A1 - German, Reinhard T1 - Towards a 5G Satellite Communication Framework for V2X T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In recent years, satellite communication has been expanding its field of application in the world of computer networks. This paper aims to provide an overview of how a typical scenario involving 5G Non-Terrestrial Networks (NTNs) for vehicle to everything (V2X) applications is characterized. In particular, a first implementation of a system that integrates them together will be described. Such a framework will later be used to evaluate the performance of applications such as Vehicle Monitoring (VM), Remote Driving (RD), Voice Over IP (VoIP), and others. Different configuration scenarios such as Low Earth Orbit and Geostationary Orbit will be considered. KW - 5G KW - non-terrestrial networks KW - satellite communication Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322148 ER - TY - THES A1 - Martin, Rüdiger T1 - Resilience, Provisioning, and Control for the Network of the Future T1 - Ausfallsicherheit, Dimensionierungsansätze und Kontrollmechanismen für das Netz der Zukunft N2 - The Internet sees an ongoing transformation process from a single best-effort service network into a multi-service network. In addition to traditional applications like e-mail,WWW-traffic, or file transfer, future generation networks (FGNs) will carry services with real-time constraints and stringent availability and reliability requirements like Voice over IP (VoIP), video conferencing, virtual private networks (VPNs) for finance, other real-time business applications, tele-medicine, or tele-robotics. Hence, quality of service (QoS) guarantees and resilience to failures are crucial characteristics of an FGN architecture. At the same time, network operations must be efficient. This necessitates sophisticated mechanisms for the provisioning and the control of future communication infrastructures. In this work we investigate such echanisms for resilient FGNs. There are many aspects of the provisioning and control of resilient FGNs such as traffic matrix estimation, traffic characterization, traffic forecasting, mechanisms for QoS enforcement also during failure cases, resilient routing, or calability concerns for future routing and addressing mechanisms. In this work we focus on three important aspects for which performance analysis can deliver substantial insights: load balancing for multipath Internet routing, fast resilience concepts, and advanced dimensioning techniques for resilient networks. Routing in modern communication networks is often based on multipath structures, e.g., equal-cost multipath routing (ECMP) in IP networks, to facilitate traffic engineering and resiliency. When multipath routing is applied, load balancing algorithms distribute the traffic over available paths towards the destination according to pre-configured distribution values. State-of-the-art load balancing algorithms operate either on the packet or the flow level. Packet level mechanisms achieve highly accurate traffic distributions, but are known to have negative effects on the performance of transport protocols and should not be applied. Flow level mechanisms avoid performance degradations, but at the expense of reduced accuracy. These inaccuracies may have unpredictable effects on link capacity requirements and complicate resource management. Thus, it is important to exactly understand the accuracy and dynamics of load balancing algorithms in order to be able to exercise better network control. Knowing about their weaknesses, it is also important to look for alternatives and to assess their applicability in different networking scenarios. This is the first aspect of this work. Component failures are inevitable during the operation of communication networks and lead to routing disruptions if no special precautions are taken. In case of a failure, the robust shortest-path routing of the Internet reconverges after some time to a state where all nodes are again reachable – provided physical connectivity still exists. But stringent availability and reliability criteria of new services make a fast reaction to failures obligatory for resilient FGNs. This led to the development of fast reroute (FRR) concepts for MPLS and IP routing. The operations of MPLS-FRR have already been standardized. Still, the standards leave some degrees of freedom for the resilient path layout and it is important to understand the tradeoffs between different options for the path layout to efficiently provision resilient FGNs. In contrast, the standardization for IP-FRR is an ongoing process. The applicability and possible combinations of different concepts still are open issues. IP-FRR also facilitates a comprehensive resilience framework for IP routing covering all steps of the failure recovery cycle. These points constitute another aspect of this work. Finally, communication networks are usually over-provisioned, i.e., they have much more capacity installed than actually required during normal operation. This is a precaution for various challenges such as network element failures. An alternative to this capacity overprovisioning (CO) approach is admission control (AC). AC blocks new flows in case of imminent overload due to unanticipated events to protect the QoS for already admitted flows. On the one hand, CO is generally viewed as a simple mechanism, AC as a more complex mechanism that complicates the network control plane and raises interoperability issues. On the other hand, AC appears more cost-efficient than CO. To obtain advanced provisioning methods for resilient FGNs, it is important to find suitable models for irregular events, such as failures and different sources of overload, and to incorporate them into capacity dimensioning methods. This allows for a fair comparison between CO and AC in various situations and yields a better understanding of the strengths and weaknesses of both concepts. Such an advanced capacity dimensioning method for resilient FGNs represents the third aspect of this work. N2 - Das Internet befindet sich gegenwärtig in einem Transformationsprozess von einem Netz mit einer einzigen best-effort Dienstklasse hin zu einem Mehr-Dienste-Netz. Zusätzlich zu herkömmlichen Anwendungen wie E-Mail, WWW oder Datenübertragung werden zukünftige Netze Dienste mit Echtzeitbedürfnissen und strikten Anforderungen an Verfügbarkeit und Zuverlässigkeit wie Voice over IP (VoIP), Videokonferenzdienste, Virtual Private Networks (VPNs) für Finanzanwendungen und andere Geschäftsanwendungen mit Echtzeitanforderungen, Tele-Medizin oder Telerobotik tragen. Daher sind die Gewährleistung von Dienstgüte und Ausfallsicherheit wesentliche Merkmale zukünftiger Netzarchitekturen. Gleichzeitig muss der Netzbetrieb effizient sein. Dies zieht den Bedarf an ausgefeilten Mechanismen für die Dimensionierung und Kontrolle ausfallsicherer Kommunikationsstrukturen nach sich. In dieser Arbeit werden solche Mechanismen, nämlich Lastaufteilung, Konzepte zur schnellen Reaktion im Fehlerfall und intelligente Ansätze zur Netzdimensionierung, untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/08 KW - Backbone-Netz KW - load balancing KW - resilience KW - fast reroute KW - admission control KW - overprovisioning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28497 ER - TY - JOUR A1 - Mandel, Alexander A1 - Hörnlein, Alexander A1 - Ifland, Marianus A1 - Lüneburg, Edeltraud A1 - Deckert, Jürgen A1 - Puppe, Frank T1 - Aufwandsanalyse für computerunterstützte Multiple-Choice Papierklausuren T1 - Cost analysis for computer supported multiple-choice paper examinations JF - GMS Journal for Medical Education N2 - Introduction: Multiple-choice-examinations are still fundamental for assessment in medical degree programs. In addition to content related research, the optimization of the technical procedure is an important question. Medical examiners face three options: paper-based examinations with or without computer support or completely electronic examinations. Critical aspects are the effort for formatting, the logistic effort during the actual examination, quality, promptness and effort of the correction, the time for making the documents available for inspection by the students, and the statistical analysis of the examination results. Methods: Since three semesters a computer program for input and formatting of MC-questions in medical and other paper-based examinations is used and continuously improved at Wuerzburg University. In the winter semester (WS) 2009/10 eleven, in the summer semester (SS) 2010 twelve and in WS 2010/11 thirteen medical examinations were accomplished with the program and automatically evaluated. For the last two semesters the remaining manual workload was recorded. Results: The cost of the formatting and the subsequent analysis including adjustments of the analysis of an average examination with about 140 participants and about 35 questions was 5-7 hours for exams without complications in the winter semester 2009/2010, about 2 hours in SS 2010 and about 1.5 hours in the winter semester 2010/11. Including exams with complications, the average time was about 3 hours per exam in SS 2010 and 2.67 hours for the WS 10/11. Discussion: For conventional multiple-choice exams the computer-based formatting and evaluation of paper-based exams offers a significant time reduction for lecturers in comparison with the manual correction of paper-based exams and compared to purely electronically conducted exams it needs a much simpler technological infrastructure and fewer staff during the exam." N2 - Einleitung: Multiple-Choice-Klausuren spielen immer noch eine herausragende Rolle für fakultätsinterne medizinische Prüfungen. Neben inhaltlichen Arbeiten stellt sich die Frage, wie die technische Abwicklung optimiert werden kann. Für Dozenten in der Medizin gibt es zunehmend drei Optionen zur Durchführung von MC-Klausuren: Papierklausuren mit oder ohne Computerunterstützung oder vollständig elektronische Klausuren. Kritische Faktoren sind der Aufwand für die Formatierung der Klausur, der logistische Aufwand bei der Klausurdurchführung, die Qualität, Schnelligkeit und der Aufwand der Klausurkorrektur, die Bereitstellung der Dokumente für die Einsichtnahme, und die statistische Analyse der Klausurergebnisse. Methoden: An der Universität Würzburg wird seit drei Semestern ein Computerprogramm zur Eingabe und Formatierung der MC-Fragen in medizinischen und anderen Papierklausuren verwendet und optimiert, mit dem im Wintersemester (WS) 2009/2010 elf, im Sommersemester (SS) 2010 zwölf und im WS 2010/11 dreizehn medizinische Klausuren erstellt und anschließend die eingescannten Antwortblätter automatisch ausgewertet wurden. In den letzten beiden Semestern wurden die Aufwände protokolliert. Ergebnisse: Der Aufwand der Formatierung und der Auswertung einschl. nachträglicher Anpassung der Auswertung einer Durchschnittsklausur mit ca. 140 Teilnehmern und ca. 35 Fragen ist von 5-7 Stunden für Klausuren ohne Komplikation im WS 2009/2010 über ca. 2 Stunden im SS 2010 auf ca. 1,5 Stunden im WS 2010/11 gefallen. Einschließlich der Klausuren mit Komplikationen bei der Auswertung betrug die durchschnittliche Zeit im SS 2010 ca. 3 Stunden und im WS 10/11 ca. 2,67 Stunden pro Klausur. Diskussion: Für konventionelle Multiple-Choice-Klausuren bietet die computergestützte Formatierung und Auswertung von Papierklausuren einen beträchtlichen Zeitvorteil für die Dozenten im Vergleich zur manuellen Korrektur von Papierklausuren und benötigt im Vergleich zu rein elektronischen Klausuren eine deutlich einfachere technische Infrastruktur und weniger Personal bei der Klausurdurchführung. KW - Multiple-Choice Prüfungen KW - Automatisierte Prüfungskorrektur KW - Aufwandsanalyse KW - Educational Measurement (I2.399) KW - Self-Evaluation Programs (I2.399.780) KW - Multiple-Choice Examination KW - Cost Analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134386 VL - 28 IS - 4 ER - TY - JOUR A1 - Maiwald, Ferdinand A1 - Bruschke, Jonas A1 - Schneider, Danilo A1 - Wacker, Markus A1 - Niebling, Florian T1 - Giving historical photographs a new perspective: introducing camera orientation parameters as new metadata in a large-scale 4D application JF - Remote Sensing N2 - The ongoing digitization of historical photographs in archives allows investigating the quality, quantity, and distribution of these images. However, the exact interior and exterior camera orientations of these photographs are usually lost during the digitization process. The proposed method uses content-based image retrieval (CBIR) to filter exterior images of single buildings in combination with metadata information. The retrieved photographs are automatically processed in an adapted structure-from-motion (SfM) pipeline to determine the camera parameters. In an interactive georeferencing process, the calculated camera positions are transferred into a global coordinate system. As all image and camera data are efficiently stored in the proposed 4D database, they can be conveniently accessed afterward to georeference newly digitized images by using photogrammetric triangulation and spatial resection. The results show that the CBIR and the subsequent SfM are robust methods for various kinds of buildings and different quantity of data. The absolute accuracy of the camera positions after georeferencing lies in the range of a few meters likely introduced by the inaccurate LOD2 models used for transformation. The proposed photogrammetric method, the database structure, and the 4D visualization interface enable adding historical urban photographs and 3D models from other locations. KW - historical images KW - 4D-GIS KW - content-based image retrieval KW - Structure-from-Motion KW - camera orientation KW - feature matching Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-311103 SN - 2072-4292 VL - 15 IS - 7 ER - TY - JOUR A1 - Madeira, Octavia A1 - Gromer, Daniel A1 - Latoschik, Marc Erich A1 - Pauli, Paul T1 - Effects of Acrophobic Fear and Trait Anxiety on Human Behavior in a Virtual Elevated Plus-Maze JF - Frontiers in Virtual Reality N2 - The Elevated Plus-Maze (EPM) is a well-established apparatus to measure anxiety in rodents, i.e., animals exhibiting an increased relative time spent in the closed vs. the open arms are considered anxious. To examine whether such anxiety-modulated behaviors are conserved in humans, we re-translated this paradigm to a human setting using virtual reality in a Cave Automatic Virtual Environment (CAVE) system. In two studies, we examined whether the EPM exploration behavior of humans is modulated by their trait anxiety and also assessed the individuals’ levels of acrophobia (fear of height), claustrophobia (fear of confined spaces), sensation seeking, and the reported anxiety when on the maze. First, we constructed an exact virtual copy of the animal EPM adjusted to human proportions. In analogy to animal EPM studies, participants (N = 30) freely explored the EPM for 5 min. In the second study (N = 61), we redesigned the EPM to make it more human-adapted and to differentiate influences of trait anxiety and acrophobia by introducing various floor textures and lower walls of closed arms to the height of standard handrails. In the first experiment, hierarchical regression analyses of exploration behavior revealed the expected association between open arm avoidance and Trait Anxiety, an even stronger association with acrophobic fear. In the second study, results revealed that acrophobia was associated with avoidance of open arms with mesh-floor texture, whereas for trait anxiety, claustrophobia, and sensation seeking, no effect was detected. Also, subjects’ fear rating was moderated by all psychometrics but trait anxiety. In sum, both studies consistently indicate that humans show no general open arm avoidance analogous to rodents and that human EPM behavior is modulated strongest by acrophobic fear, whereas trait anxiety plays a subordinate role. Thus, we conclude that the criteria for cross-species validity are met insufficiently in this case. Despite the exploratory nature, our studies provide in-depth insights into human exploration behavior on the virtual EPM. KW - elevated plus-maze KW - EPM KW - anxiety KW - virtual reality KW - translational neuroscience KW - acrophobia KW - trait anxiety Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258709 VL - 2 ER - TY - THES A1 - Löffler, Andre T1 - Constrained Graph Layouts: Vertices on the Outer Face and on the Integer Grid T1 - Graphzeichnen unter Nebenbedingungen: Knoten auf der Außenfacette und mit ganzzahligen Koordinaten N2 - Constraining graph layouts - that is, restricting the placement of vertices and the routing of edges to obey certain constraints - is common practice in graph drawing. In this book, we discuss algorithmic results on two different restriction types: placing vertices on the outer face and on the integer grid. For the first type, we look into the outer k-planar and outer k-quasi-planar graphs, as well as giving a linear-time algorithm to recognize full and closed outer k-planar graphs Monadic Second-order Logic. For the second type, we consider the problem of transferring a given planar drawing onto the integer grid while perserving the original drawings topology; we also generalize a variant of Cauchy's rigidity theorem for orthogonal polyhedra of genus 0 to those of arbitrary genus. N2 - Das Einschränken von Zeichnungen von Graphen, sodass diese bestimmte Nebenbedingungen erfüllen - etwa solche, die das Platzieren von Knoten oder den Verlauf von Kanten beeinflussen - sind im Graphzeichnen allgegenwärtig. In dieser Arbeit befassen wir uns mit algorithmischen Resultaten zu zwei speziellen Einschränkungen, nämlich dem Platzieren von Knoten entweder auf der Außenfacette oder auf ganzzahligen Koordinaten. Für die erste Einschränkung untersuchen wir die außen k-planaren und außen k-quasi-planaren Graphen und geben einen auf monadische Prädikatenlogik zweiter Stufe basierenden Algorithmus an, der überprüft, ob ein Graph voll außen k-planar ist. Für die zweite Einschränkung untersuchen wir das Problem, eine gegebene planare Zeichnung eines Graphen auf das ganzzahlige Koordinatengitter zu transportieren, ohne dabei die Topologie der Zeichnung zu verändern; außerdem generalisieren wir eine Variante von Cauchys Starrheitssatz für orthogonale Polyeder von Geschlecht 0 auf solche von beliebigem Geschlecht. KW - Graphenzeichnen KW - Komplexität KW - Algorithmus KW - Algorithmische Geometrie KW - Kombinatorik KW - Planare Graphen KW - Polyeder KW - Konvexe Zeichnungen Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215746 SN - 978-3-95826-146-4 SN - 978-3-95826-147-1 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-146-4, 32,90 EUR PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - JOUR A1 - Lugrin, Jean-Luc A1 - Latoschik, Marc Erich A1 - Habel, Michael A1 - Roth, Daniel A1 - Seufert, Christian A1 - Grafe, Silke T1 - Breaking Bad Behaviors: A New Tool for Learning Classroom Management Using Virtual Reality JF - Frontiers in ICT N2 - This article presents an immersive virtual reality (VR) system for training classroom management skills, with a specific focus on learning to manage disruptive student behavior in face-to-face, one-to-many teaching scenarios. The core of the system is a real-time 3D virtual simulation of a classroom populated by twenty-four semi-autonomous virtual students. The system has been designed as a companion tool for classroom management seminars in a syllabus for primary and secondary school teachers. This will allow lecturers to link theory with practice using the medium of VR. The system is therefore designed for two users: a trainee teacher and an instructor supervising the training session. The teacher is immersed in a real-time 3D simulation of a classroom by means of a head-mounted display and headphone. The instructor operates a graphical desktop console, which renders a view of the class and the teacher whose avatar movements are captured by a marker less tracking system. This console includes a 2D graphics menu with convenient behavior and feedback control mechanisms to provide human-guided training sessions. The system is built using low-cost consumer hardware and software. Its architecture and technical design are described in detail. A first evaluation confirms its conformance to critical usability requirements (i.e., safety and comfort, believability, simplicity, acceptability, extensibility, affordability, and mobility). Our initial results are promising and constitute the necessary first step toward a possible investigation of the efficiency and effectiveness of such a system in terms of learning outcomes and experience. KW - virtual reality training KW - immersive classroom management KW - immersive classroom KW - virtual agent interaction KW - student simulation Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147945 VL - 3 IS - 26 ER - TY - JOUR A1 - Lopez-Arreguin, A. J. R. A1 - Montenegro, S. T1 - Improving engineering models of terramechanics for planetary exploration JF - Results in Engineering N2 - This short letter proposes more consolidated explicit solutions for the forces and torques acting on typical rover wheels, that can be used as a method to determine their average mobility characteristics in planetary soils. The closed loop solutions stand in one of the verified methods, but at difference of the previous, observables are decoupled requiring a less amount of physical parameters to measure. As a result, we show that with knowledge of terrain properties, wheel driving performance rely in a single observable only. Because of their generality, the formulated equations established here can have further implications in autonomy and control of rovers or planetary soil characterization. KW - Wheel KW - Terramechanics KW - Forces KW - Torque KW - Robotics Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202490 VL - 3 ER - TY - JOUR A1 - Loh, Frank A1 - Wamser, Florian A1 - Poignée, Fabian A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - YouTube Dataset on Mobile Streaming for Internet Traffic Modeling and Streaming Analysis JF - Scientific Data N2 - Around 4.9 billion Internet users worldwide watch billions of hours of online video every day. As a result, streaming is by far the predominant type of traffic in communication networks. According to Google statistics, three out of five video views come from mobile devices. Thus, in view of the continuous technological advances in end devices and increasing mobile use, datasets for mobile streaming are indispensable in research but only sparsely dealt with in literature so far. With this public dataset, we provide 1,081 hours of time-synchronous video measurements at network, transport, and application layer with the native YouTube streaming client on mobile devices. The dataset includes 80 network scenarios with 171 different individual bandwidth settings measured in 5,181 runs with limited bandwidth, 1,939 runs with emulated 3 G/4 G traces, and 4,022 runs with pre-defined bandwidth changes. This corresponds to 332 GB video payload. We present the most relevant quality indicators for scientific use, i.e., initial playback delay, streaming video quality, adaptive video quality changes, video rebuffering events, and streaming phases. KW - internet traffic KW - mobile streaming KW - YouTube Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300240 VL - 9 IS - 1 ER - TY - RPRT A1 - Loh, Frank A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Paving the Way for an Energy Efficient and Sustainable Future Internet of Things T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In this work, we describe the network from data collection to data processing and storage as a system based on different layers. We outline the different layers and highlight major tasks and dependencies with regard to energy consumption and energy efficiency. With this view, we can outwork challenges and questions a future system architect must answer to provide a more sustainable, green, resource friendly, and energy efficient application or system. Therefore, all system layers must be considered individually but also altogether for future IoT solutions. This requires, in particular, novel sustainability metrics in addition to current Quality of Service and Quality of Experience metrics to provide a high power, user satisfying, and sustainable network. KW - Internet of Things KW - energy efficiency KW - sustainability Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322161 ER - TY - JOUR A1 - Loh, Frank A1 - Poignée, Fabian A1 - Wamser, Florian A1 - Leidinger, Ferdinand A1 - Hoßfeld, Tobias T1 - Uplink vs. Downlink: Machine Learning-Based Quality Prediction for HTTP Adaptive Video Streaming JF - Sensors N2 - Streaming video is responsible for the bulk of Internet traffic these days. For this reason, Internet providers and network operators try to make predictions and assessments about the streaming quality for an end user. Current monitoring solutions are based on a variety of different machine learning approaches. The challenge for providers and operators nowadays is that existing approaches require large amounts of data. In this work, the most relevant quality of experience metrics, i.e., the initial playback delay, the video streaming quality, video quality changes, and video rebuffering events, are examined using a voluminous data set of more than 13,000 YouTube video streaming runs that were collected with the native YouTube mobile app. Three Machine Learning models are developed and compared to estimate playback behavior based on uplink request information. The main focus has been on developing a lightweight approach using as few features and as little data as possible, while maintaining state-of-the-art performance. KW - HTTP adaptive video streaming KW - quality of experience prediction KW - machine learning Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241121 SN - 1424-8220 VL - 21 IS - 12 ER - TY - JOUR A1 - Loh, Frank A1 - Mehling, Noah A1 - Hoßfeld, Tobias T1 - Towards LoRaWAN without data loss: studying the performance of different channel access approaches JF - Sensors N2 - The Long Range Wide Area Network (LoRaWAN) is one of the fastest growing Internet of Things (IoT) access protocols. It operates in the license free 868 MHz band and gives everyone the possibility to create their own small sensor networks. The drawback of this technology is often unscheduled or random channel access, which leads to message collisions and potential data loss. For that reason, recent literature studies alternative approaches for LoRaWAN channel access. In this work, state-of-the-art random channel access is compared with alternative approaches from the literature by means of collision probability. Furthermore, a time scheduled channel access methodology is presented to completely avoid collisions in LoRaWAN. For this approach, an exhaustive simulation study was conducted and the performance was evaluated with random access cross-traffic. In a general theoretical analysis the limits of the time scheduled approach are discussed to comply with duty cycle regulations in LoRaWAN. KW - LoRaWAN KW - IoT KW - channel management KW - scheduling KW - collision Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-302418 SN - 1424-8220 VL - 22 IS - 2 ER - TY - RPRT A1 - Loh, Frank A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - LoRaWAN Network Planning in Smart Environments: Towards Reliability, Scalability, and Cost Reduction T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - The goal in this work is to present a guidance for LoRaWAN planning to improve overall reliability for message transmissions and scalability. At the end, the cost component is discussed. Therefore, a five step approach is presented that helps to plan a LoRaWAN deployment step by step: Based on the device locations, an initial gateway placement is suggested followed by in-depth frequency and channel access planning. After an initial planning phase, updates for channel access and the initial gateway planning is suggested that should also be done periodically during network operation. Since current gateway placement approaches are only studied with random channel access, there is a lot of potential in the cell planning phase. Furthermore, the performance of different channel access approaches is highly related on network load, and thus cell size and sensor density. Last, the influence of different cell planning ideas on expected costs are discussed. KW - Datennetz KW - LoRaWan Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280829 ER - TY - JOUR A1 - Loda, Sophia A1 - Krebs, Jonathan A1 - Danhof, Sophia A1 - Schreder, Martin A1 - Solimando, Antonio G. A1 - Strifler, Susanne A1 - Rasche, Leo A1 - Kortüm, Martin A1 - Kerscher, Alexander A1 - Knop, Stefan A1 - Puppe, Frank A1 - Einsele, Hermann A1 - Bittrich, Max T1 - Exploration of artificial intelligence use with ARIES in multiple myeloma research JF - Journal of Clinical Medicine N2 - Background: Natural language processing (NLP) is a powerful tool supporting the generation of Real-World Evidence (RWE). There is no NLP system that enables the extensive querying of parameters specific to multiple myeloma (MM) out of unstructured medical reports. We therefore created a MM-specific ontology to accelerate the information extraction (IE) out of unstructured text. Methods: Our MM ontology consists of extensive MM-specific and hierarchically structured attributes and values. We implemented “A Rule-based Information Extraction System” (ARIES) that uses this ontology. We evaluated ARIES on 200 randomly selected medical reports of patients diagnosed with MM. Results: Our system achieved a high F1-Score of 0.92 on the evaluation dataset with a precision of 0.87 and recall of 0.98. Conclusions: Our rule-based IE system enables the comprehensive querying of medical reports. The IE accelerates the extraction of data and enables clinicians to faster generate RWE on hematological issues. RWE helps clinicians to make decisions in an evidence-based manner. Our tool easily accelerates the integration of research evidence into everyday clinical practice. KW - natural language processing KW - ontology KW - artificial intelligence KW - multiple myeloma KW - real world evidence Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197231 SN - 2077-0383 VL - 8 IS - 7 ER - TY - JOUR A1 - Liman, Leon A1 - May, Bernd A1 - Fette, Georg A1 - Krebs, Jonathan A1 - Puppe, Frank T1 - Using a clinical data warehouse to calculate and present key metrics for the radiology department: implementation and performance evaluation JF - JMIR Medical Informatics N2 - Background: Due to the importance of radiologic examinations, such as X-rays or computed tomography scans, for many clinical diagnoses, the optimal use of the radiology department is 1 of the primary goals of many hospitals. Objective: This study aims to calculate the key metrics of this use by creating a radiology data warehouse solution, where data from radiology information systems (RISs) can be imported and then queried using a query language as well as a graphical user interface (GUI). Methods: Using a simple configuration file, the developed system allowed for the processing of radiology data exported from any kind of RIS into a Microsoft Excel, comma-separated value (CSV), or JavaScript Object Notation (JSON) file. These data were then imported into a clinical data warehouse. Additional values based on the radiology data were calculated during this import process by implementing 1 of several provided interfaces. Afterward, the query language and GUI of the data warehouse were used to configure and calculate reports on these data. For the most common types of requested reports, a web interface was created to view their numbers as graphics. Results: The tool was successfully tested with the data of 4 different German hospitals from 2018 to 2021, with a total of 1,436,111 examinations. The user feedback was good, since all their queries could be answered if the available data were sufficient. The initial processing of the radiology data for using them with the clinical data warehouse took (depending on the amount of data provided by each hospital) between 7 minutes and 1 hour 11 minutes. Calculating 3 reports of different complexities on the data of each hospital was possible in 1-3 seconds for reports with up to 200 individual calculations and in up to 1.5 minutes for reports with up to 8200 individual calculations. Conclusions: A system was developed with the main advantage of being generic concerning the export of different RISs as well as concerning the configuration of queries for various reports. The queries could be configured easily using the GUI of the data warehouse, and their results could be exported into the standard formats Excel and CSV for further processing. KW - data warehouse KW - eHealth KW - hospital data KW - electronic health records KW - radiology KW - statistics and numerical data KW - medical records Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349411 SN - 2291-9694 VL - 11 ER -