TY - GEN A1 - Funken, Matthias A1 - Tscherner, Michael T1 - Jahresbericht 2018 des Rechenzentrums der Universität Würzburg T1 - Annual Report 2018 of the Computer Center, University of Wuerzburg N2 - Eine Übersicht über die Aktivitäten des Rechenzentrums im Jahr 2018. T3 - Jahresbericht des Rechenzentrums der Universität Würzburg - 2018 KW - Julius-Maximilians-Universität Würzburg KW - Jahresbericht KW - Jahresbericht KW - Rechenzentrum KW - RZUW KW - annual report KW - Computer Center University of Wuerzburg Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188265 UR - https://www.rz.uni-wuerzburg.de/wir/publikationen/ ET - 1. Auflage ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DDRS4PALS: a software for the acquisition and simulation of lifetime spectra using the DRS4 evaluation board JF - SoftwareX N2 - Lifetime techniques are applied to diverse fields of study including materials sciences, semiconductor physics, biology, molecular biophysics and photochemistry. Here we present DDRS4PALS, a software for the acquisition and simulation of lifetime spectra using the DRS4 evaluation board (Paul Scherrer Institute, Switzerland) for time resolved measurements and digitization of detector output pulses. Artifact afflicted pulses can be corrected or rejected prior to the lifetime calculation to provide the generation of high-quality lifetime spectra, which are crucial for a profound analysis, i.e. the decomposition of the true information. Moreover, the pulses can be streamed on an (external) hard drive during the measurement and subsequently downloaded in the offline mode without being connected to the hardware. This allows the generation of various lifetime spectra at different configurations from one single measurement and, hence, a meaningful comparison in terms of analyzability and quality. Parallel processing and an integrated JavaScript based language provide convenient options to accelerate and automate time consuming processes such as lifetime spectra simulations. KW - Lifetime spectroscopy KW - Positron annihilation spectroscopy KW - Simulation KW - Time resolved measurements Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202276 VL - 10 ER - TY - THES A1 - Borrmann, Dorit T1 - Multi-modal 3D mapping - Combining 3D point clouds with thermal and color information T1 - Multi-modale 3D-Kartierung - Kombination von 3D-Punktwolken mit Thermo- und Farbinformation N2 - Imagine a technology that automatically creates a full 3D thermal model of an environment and detects temperature peaks in it. For better orientation in the model it is enhanced with color information. The current state of the art for analyzing temperature related issues is thermal imaging. It is relevant for energy efficiency but also for securing important infrastructure such as power supplies and temperature regulation systems. Monitoring and analysis of the data for a large building is tedious as stable conditions need to be guaranteed for several hours and detailed notes about the pose and the environment conditions for each image must be taken. For some applications repeated measurements are necessary to monitor changes over time. The analysis of the scene is only possible through expertise and experience. This thesis proposes a robotic system that creates a full 3D model of the environment with color and thermal information by combining thermal imaging with the technology of terrestrial laser scanning. The addition of a color camera facilitates the interpretation of the data and allows for other application areas. The data from all sensors collected at different positions is joined in one common reference frame using calibration and scan matching. The first part of the thesis deals with 3D point cloud processing with the emphasis on accessing point cloud data efficiently, detecting planar structures in the data and registering multiple point clouds into one common coordinate system. The second part covers the autonomous exploration and data acquisition with a mobile robot with the objective to minimize the unseen area in 3D space. Furthermore, the combination of different modalities, color images, thermal images and point cloud data through calibration is elaborated. The last part presents applications for the the collected data. Among these are methods to detect the structure of building interiors for reconstruction purposes and subsequent detection and classification of windows. A system to project the gathered thermal information back into the scene is presented as well as methods to improve the color information and to join separately acquired point clouds and photo series. A full multi-modal 3D model contains all the relevant geometric information about the recorded scene and enables an expert to fully analyze it off-site. The technology clears the path for automatically detecting points of interest thereby helping the expert to analyze the heat flow as well as localize and identify heat leaks. The concept is modular and neither limited to achieving energy efficiency nor restricted to the use in combination with a mobile platform. It also finds its application in fields such as archaeology and geology and can be extended by further sensors. N2 - Man stelle sich eine Technologie vor, die automatisch ein vollständiges 3D-Thermographiemodell einer Umgebung generiert und Temperaturspitzen darin erkennt. Zur besseren Orientierung innerhalb des Modells ist dieses mit Farbinformationen erweitert. In der Analyse temperaturrelevanter Fragestellungen sind Thermalbilder der Stand der Technik. Darunter fallen Energieeffizienz und die Sicherung wichtiger Infrastruktur, wie Energieversorgung und Systeme zur Temperaturregulierung. Die Überwachung und anschließende Analyse der Daten eines großen Gebäudes ist aufwändig, da über mehrere Stunden stabile Bedingungen garantiert und detaillierte Aufzeichnungen über die Aufnahmeposen und die Umgebungsverhältnisse für jedes Wärmebild erstellt werden müssen. Einige Anwendungen erfordern wiederholte Messungen, um Veränderungen über die Zeit zu beobachten. Eine Analyse der Szene ist nur mit Erfahrung und Expertise möglich. Diese Arbeit stellt ein Robotersystem vor, das durch Kombination von Thermographie mit terrestrischem Laserscanning ein vollständiges 3D Modell der Umgebung mit Farb- und Temperaturinformationen erstellt. Die ergänzende Farbkamera vereinfacht die Interpretation der Daten und eröffnet weitere Anwendungsfelder. Die an unterschiedlichen Positionen aufgenommenen Daten aller Sensoren werden durch Kalibrierung und Scanmatching in einem gemeinsamen Bezugssystem zusammengefügt. Der erste Teil der Arbeit behandelt 3D-Punktwolkenverarbeitung mit Schwerpunkt auf effizientem Punktzugriff, Erkennung planarer Strukturen und Registrierung mehrerer Punktwolken in einem gemeinsamen Koordinatensystem. Der zweite Teil beschreibt die autonome Erkundung und Datenakquise mit einem mobilen Roboter, mit dem Ziel, die bisher nicht erfassten Bereiche im 3D-Raum zu minimieren. Des Weiteren wird die Kombination verschiedener Modalitäten, Farbbilder, Thermalbilder und Punktwolken durch Kalibrierung ausgearbeitet. Den abschließenden Teil stellen Anwendungsszenarien für die gesammelten Daten dar, darunter Methoden zur Erkennung der Innenraumstruktur für die Rekonstruktion von Gebäuden und der anschließenden Erkennung und Klassifizierung von Fenstern. Ein System zur Rückprojektion der gesammelten Thermalinformation in die Umgebung wird ebenso vorgestellt wie Methoden zur Verbesserung der Farbinformationen und zum Zusammenfügen separat aufgenommener Punktwolken und Fotoreihen. Ein vollständiges multi-modales 3D Modell enthält alle relevanten geometrischen Informationen der aufgenommenen Szene und ermöglicht einem Experten, diese standortunabhängig zu analysieren. Diese Technologie ebnet den Weg für die automatische Erkennung relevanter Bereiche und für die Analyse des Wärmeflusses und vereinfacht somit die Lokalisierung und Identifikation von Wärmelecks für den Experten. Das vorgestellte modulare Konzept ist weder auf den Anwendungsfall Energieeffizienz beschränkt noch auf die Verwendung einer mobilen Plattform angewiesen. Es ist beispielsweise auch in Feldern wie der Archäologie und Geologie einsetzbar und kann durch zusätzliche Sensoren erweitert werden. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 14 KW - Punktwolke KW - Lidar KW - Thermografie KW - Robotik KW - 3D point cloud KW - Laser scanning KW - Robotics KW - 3D thermal mapping KW - Registration Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-157085 SN - 978-3-945459-20-1 SN - 1868-7474 SN - 1868-7466 ER - TY - JOUR A1 - Pfitzner, Christian A1 - May, Stefan A1 - Nüchter, Andreas T1 - Body weight estimation for dose-finding and health monitoring of lying, standing and walking patients based on RGB-D data JF - Sensors N2 - This paper describes the estimation of the body weight of a person in front of an RGB-D camera. A survey of different methods for body weight estimation based on depth sensors is given. First, an estimation of people standing in front of a camera is presented. Second, an approach based on a stream of depth images is used to obtain the body weight of a person walking towards a sensor. The algorithm first extracts features from a point cloud and forwards them to an artificial neural network (ANN) to obtain an estimation of body weight. Besides the algorithm for the estimation, this paper further presents an open-access dataset based on measurements from a trauma room in a hospital as well as data from visitors of a public event. In total, the dataset contains 439 measurements. The article illustrates the efficiency of the approach with experiments with persons lying down in a hospital, standing persons, and walking persons. Applicable scenarios for the presented algorithm are body weight-related dosing of emergency patients. KW - RGB-D KW - human body weight KW - image processing KW - kinect KW - machine learning KW - perception KW - segmentation KW - sensor fusion KW - stroke KW - thermal camera Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176642 VL - 18 IS - 5 ER - TY - THES A1 - Fleszar, Krzysztof T1 - Network-Design Problems in Graphs and on the Plane T1 - Netzwerk-Design-Probleme in Graphen und auf der Ebene N2 - A network design problem defines an infinite set whose elements, called instances, describe relationships and network constraints. It asks for an algorithm that, given an instance of this set, designs a network that respects the given constraints and at the same time optimizes some given criterion. In my thesis, I develop algorithms whose solutions are optimum or close to an optimum value within some guaranteed bound. I also examine the computational complexity of these problems. Problems from two vast areas are considered: graphs and the Euclidean plane. In the Maximum Edge Disjoint Paths problem, we are given a graph and a subset of vertex pairs that are called terminal pairs. We are asked for a set of paths where the endpoints of each path form a terminal pair. The constraint is that any two paths share at most one inner vertex. The optimization criterion is to maximize the cardinality of the set. In the hard-capacitated k-Facility Location problem, we are given an integer k and a complete graph where the distances obey a given metric and where each node has two numerical values: a capacity and an opening cost. We are asked for a subset of k nodes, called facilities, and an assignment of all the nodes, called clients, to the facilities. The constraint is that the number of clients assigned to a facility cannot exceed the facility's capacity value. The optimization criterion is to minimize the total cost which consists of the total opening cost of the facilities and the total distance between the clients and the facilities they are assigned to. In the Stabbing problem, we are given a set of axis-aligned rectangles in the plane. We are asked for a set of horizontal line segments such that, for every rectangle, there is a line segment crossing its left and right edge. The optimization criterion is to minimize the total length of the line segments. In the k-Colored Non-Crossing Euclidean Steiner Forest problem, we are given an integer k and a finite set of points in the plane where each point has one of k colors. For every color, we are asked for a drawing that connects all the points of the same color. The constraint is that drawings of different colors are not allowed to cross each other. The optimization criterion is to minimize the total length of the drawings. In the Minimum Rectilinear Polygon for Given Angle Sequence problem, we are given an angle sequence of left (+90°) turns and right (-90°) turns. We are asked for an axis-parallel simple polygon where the angles of the vertices yield the given sequence when walking around the polygon in counter-clockwise manner. The optimization criteria considered are to minimize the perimeter, the area, and the size of the axis-parallel bounding box of the polygon. N2 - Ein Netzwerk-Design-Problem definiert eine unendliche Menge, deren Elemente, als Instanzen bezeichnet, Beziehungen und Beschränkungen in einem Netzwerk beschreiben. Die Lösung eines solchen Problems besteht aus einem Algorithmus, der auf die Eingabe einer beliebigen Instanz dieser Menge ein Netzwerk entwirft, welches die gegebenen Beschränkungen einhält und gleichzeitig ein gegebenes Kriterium optimiert. In meiner Dissertation habe ich Algorithmen entwickelt, deren Netzwerke stets optimal sind oder nachweisbar nahe am Optimum liegen. Zusätzlich habe ich die Berechnungskomplexität dieser Probleme untersucht. Dabei wurden Probleme aus zwei weiten Gebieten betrachtet: Graphen und der Euklidische Ebene. Im Maximum-Edge-Disjoint-Paths-Problem besteht die Eingabe aus einem Graphen und einer Teilmenge von Knotenpaaren, die wir mit Terminalpaare bezeichnen. Gesucht ist eine Menge von Pfaden, die Terminalpaare verbinden. Die Beschränkung ist, dass keine zwei Pfade einen gleichen inneren Knoten haben dürfen. Das Optimierungskriterium ist die Maximierung der Kardinalität dieser Menge. Im Hard-Capacitated-k-Facility-Location-Problem besteht die Eingabe aus einer Ganzzahl k und einem vollständigen Graphen, in welchem die Distanzen einer gegebenen Metrik unterliegen und in welchem jedem Knoten sowohl eine numerische Kapazität als auch ein Eröffnungskostenwert zugeschrieben ist. Gesucht ist eine Teilmenge von k Knoten, Facilities genannt, und eine Zuweisung aller Knoten, Clients genannt, zu den Facilities. Die Beschränkung ist, dass die Anzahl der Clients, die einer Facility zugewiesen sind, nicht deren Kapazität überschreiten darf. Das Optimierungskriterium ist die Minimierung der Gesamtkosten bestehend aus den Gesamteröffnungskosten der Facilities sowie der Gesamtdistanz zwischen den Clients und den ihnen zugewiesenen Facilities. Im Stabbing-Problem besteht die Eingabe aus einer Menge von achsenparallelen Rechtecken in der Ebene. Gesucht ist eine Menge von horizontalen Geradenstücken mit der Randbedingung, dass die linke und rechte Seite eines jeden Rechtecks von einem Geradenstück verbunden ist. Das Optimierungskriterium ist die Minimierung der Gesamtlänge aller Geradenstücke. Im k-Colored-Non-Crossing-Euclidean-Steiner-Forest-Problem besteht die Eingabe aus einer Ganzzahl k und einer endlichen Menge von Punkten in der Ebene, wobei jeder Punkt in einer von k Farben gefärbt ist. Gesucht ist für jede Farbe eine Zeichnung, in welcher alle Punkte der Farbe verbunden sind. Die Beschränkung ist, dass Zeichnungen verschiedener Farben sich nicht kreuzen dürfen. Das Optimierungskriterium ist die Minimierung des Gesamtintenverbrauchs, das heißt, der Gesamtlänge der Zeichnungen. Im Minimum-Rectilinear-Polygon-for-Given-Angle-Sequence-Problem besteht die Eingabe aus einer Folge von Links- (+90°) und Rechtsabbiegungen (-90°). Gesucht ist ein achsenparalleles Polygon dessen Eckpunkte die gegebene Folge ergeben, wenn man das Polygon gegen den Uhrzeigersinn entlangläuft. Die Optimierungskriterien sind die Minimierung des Umfangs und der inneren Fläche des Polygons sowie der Größe des notwendigen Zeichenblattes, d.h., des kleinsten Rechteckes, das das Polygon einschließt. N2 - Given points in the plane, connect them using minimum ink. Though the task seems simple, it turns out to be very time consuming. In fact, scientists believe that computers cannot efficiently solve it. So, do we have to resign? This book examines such NP-hard network-design problems, from connectivity problems in graphs to polygonal drawing problems on the plane. First, we observe why it is so hard to optimally solve these problems. Then, we go over to attack them anyway. We develop fast algorithms that find approximate solutions that are very close to the optimal ones. Hence, connecting points with slightly more ink is not hard. KW - Euklidische Ebene KW - Algorithmus KW - Komplexität KW - NP-schweres Problem KW - Graph KW - approximation algorithm KW - hardness KW - optimization KW - graphs KW - network KW - Optimierungsproblem KW - Approximationsalgorithmus KW - complexity KW - Euclidean plane Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154904 SN - 978-3-95826-076-4 (Print) SN - 978-3-95826-077-1 (Online) N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-076-4, 28,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - THES A1 - Wojtkowiak, Harald T1 - Planungssystem zur Steigerung der Autonomie von Kleinstsatelliten T1 - Planningsystem to increase the autonomy of small satellites N2 - Der Betrieb von Satelliten wird sich in Zukunft gravierend ändern. Die bisher ausgeübte konventionelle Vorgehensweise, bei der die Planung der vom Satelliten auszuführenden Aktivitäten sowie die Kontrolle hierüber ausschließlich vom Boden aus erfolgen, stößt bei heutigen Anwendungen an ihre Grenzen. Im schlimmsten Fall verhindert dieser Umstand sogar die Erschließung bisher ungenutzter Möglichkeiten. Der Gewinn eines Satelliten, sei es in Form wissenschaftlicher Daten oder der Vermarktung satellitengestützter Dienste, wird daher nicht optimal ausgeschöpft. Die Ursache für dieses Problem lässt sich im Grunde auf eine ausschlaggebende Tatsache zurückführen: Konventionelle Satelliten können ihr Verhalten, d.h. die Folge ihrer Tätigkeiten, nicht eigenständig anpassen. Stattdessen erstellt das Bedienpersonal am Boden - vor allem die Operatoren - mit Hilfe von Planungssoftware feste Ablaufpläne, die dann in Form von Kommandosequenzen von den Bodenstationen aus an die jeweiligen Satelliten hochgeladen werden. Dort werden die Befehle lediglich überprüft, interpretiert und strikt ausgeführt. Die Abarbeitung erfolgt linear. Situationsbedingte Änderungen, wie sie vergleichsweise bei der Codeausführung von Softwareprogrammen durch Kontrollkonstrukte, zum Beispiel Schleifen und Verzweigungen, üblich sind, sind typischerweise nicht vorgesehen. Der Operator ist daher die einzige Instanz, die das Verhalten des Satelliten mittels Kommandierung, per Upload, beeinflussen kann, und auch nur dann, wenn ein direkter Funkkontakt zwischen Satellit und Bodenstation besteht. Die dadurch möglichen Reaktionszeiten des Satelliten liegen bestenfalls bei einigen Sekunden, falls er sich im Wirkungsbereich der Bodenstation befindet. Außerhalb des Kontaktfensters kann sich die Zeitschranke, gegeben durch den Orbit und die aktuelle Position des Satelliten, von einigen Minuten bis hin zu einigen Stunden erstrecken. Die Signallaufzeiten der Funkübertragung verlängern die Reaktionszeiten um weitere Sekunden im erdnahen Bereich. Im interplanetaren Raum erstrecken sich die Zeitspannen aufgrund der immensen Entfernungen sogar auf mehrere Minuten. Dadurch bedingt liegt die derzeit technologisch mögliche, bodengestützte, Reaktionszeit von Satelliten bestenfalls im Bereich von einigen Sekunden. Diese Einschränkung stellt ein schweres Hindernis für neuartige Satellitenmissionen, bei denen insbesondere nichtdeterministische und kurzzeitige Phänomene (z.B. Blitze und Meteoreintritte in die Erdatmosphäre) Gegenstand der Beobachtungen sind, dar. Die langen Reaktionszeiten des konventionellen Satellitenbetriebs verhindern die Realisierung solcher Missionen, da die verzögerte Reaktion erst erfolgt, nachdem das zu beobachtende Ereignis bereits abgeschlossen ist. Die vorliegende Dissertation zeigt eine Möglichkeit, das durch die langen Reaktionszeiten entstandene Problem zu lösen, auf. Im Zentrum des Lösungsansatzes steht dabei die Autonomie. Im Wesentlichen geht es dabei darum, den Satelliten mit der Fähigkeit auszustatten, sein Verhalten, d.h. die Folge seiner Tätigkeiten, eigenständig zu bestimmen bzw. zu ändern. Dadurch wird die direkte Abhängigkeit des Satelliten vom Operator bei Reaktionen aufgehoben. Im Grunde wird der Satellit in die Lage versetzt, sich selbst zu kommandieren. Die Idee der Autonomie wurde im Rahmen der zugrunde liegenden Forschungsarbeiten umgesetzt. Das Ergebnis ist ein autonomes Planungssystem. Dabei handelt es sich um ein Softwaresystem, mit dem sich autonomes Verhalten im Satelliten realisieren lässt. Es kann an unterschiedliche Satellitenmissionen angepasst werden. Ferner deckt es verschiedene Aspekte des autonomen Satellitenbetriebs, angefangen bei der generellen Entscheidungsfindung der Tätigkeiten, über die zeitliche Ablaufplanung unter Einbeziehung von Randbedingungen (z.B. Ressourcen) bis hin zur eigentlichen Ausführung, d.h. Kommandierung, ab. Das Planungssystem kommt als Anwendung in ASAP, einer autonomen Sensorplattform, zum Einsatz. Es ist ein optisches System und dient der Detektion von kurzzeitigen Phänomenen und Ereignissen in der Erdatmosphäre. Die Forschungsarbeiten an dem autonomen Planungssystem, an ASAP sowie an anderen zu diesen in Bezug stehenden Systemen wurden an der Professur für Raumfahrttechnik des Lehrstuhls Informatik VIII der Julius-Maximilians-Universität Würzburg durchgeführt. N2 - Satellite operation will change thoroughly in future. So far the currently performed conventional approach of controlling satellites is hitting its limitation by todays application. This is due to the fact that activities of the satellite are planned and controlled exclusively by ground infrastructure. In the worst case this circumstance prevents the exploitation of potential but so far unused opportunities. Thus the yield of satellites, may it be in the form of scientific research data or the commercialization of satellite services, is not optimized. After all the cause of this problem can be tracked back to one crucial matter: Conventional satellites are not able to alter their behaviour, i.e. the order of their actions, themselves. Instead schedules are created by ground staff – mainly operators - utilizing specialized planning software. The output is then transformed into command sequences and uploaded to the dedicated satellite via ground stations. On-board the commands are solely checked, interpreted and strictly executed. The flow is linear. Situational changes, like in the code execution of software programs via control constructs, e.g. loops and branches, are typically not present. Thus the operator is the only instance which is able to change the behaviour of the satellite via command upload. Therefore a direct radio link between satellite and ground station is required. Reaction times are hereby restricted. In the best case, means when the satellite is inside the area of effect, the limitations are to a few seconds. Outside the contact window, the time bound may increase from minutes to hours. The exact timing are dependant from the orbit of the satellite and its position on it. The signal flow of the radio links adds additional reaction time from a few seconds in near earth up to some minutes in interplanetary space due to the vast distances. In sum the best achievable ground based reaction time lies in the area of some seconds. This restriction is a severe handicap for novel satellite missions with focus on non-deterministic and short-time phenomena, e.g. lightning and meteor entries into Earth atmosphere. The long reaction times of conventional satellite operations prevent the realization of such missions. This is due to the fact that delayed reactions take place after the event to observe has finished. This dissertation shows a possibility to solve the problem caused by long reaction times. Autonomy lies in the centre of the main approach. The key is to augment the satellite with the ability to alter its behaviour, i.e. the sequence of its actions, and to deliberate about it. Thus, the direct reaction dependency of the satellite from operators will be lifted. In principle the satellite will be able to command itself. The herein idea of autonomy is based on research work, which provides the context for design and implementation. The output is an autonomous planning system. It’s a software system which enables a satellite to behave autonomously and can be adapted to different types of satellite missions. Additionally, it covers different aspects of autonomous satellite operation, starting with general decision making of activities, going over to time scheduling inclusive constraint consideration, e.g. resources, and finishing at last with the actual execution, i.e. commanding. The autonomous planning system runs as one application of ASAP, an autonomous sensor platform. It is an optical system with the purpose to detect short-time phenomena and events in Earth atmosphere. The research work for the autonomous planning system, for ASAP and for other related systems has been executed at the professorship for space technology which is part of the department for computer science VIII at the Julius-Maximilians-Universität Würzburg. KW - Planungssystem KW - Autonomie KW - Satellit KW - Entscheidungsfindung KW - Ablaufplanung KW - Planausführung KW - System KW - Missionsbetrieb KW - decission finding KW - scheduling KW - plan execution KW - system KW - mission operation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163569 ER - TY - THES A1 - Baier, Pablo A. T1 - Simulator for Minimally Invasive Vascular Interventions: Hardware and Software T1 - VR-Simulation für das Training von Herzkathetereingriffen: Hard- und Softwarelösung N2 - A complete simulation system is proposed that can be used as an educational tool by physicians in training basic skills of Minimally Invasive Vascular Interventions. In the first part, a surface model is developed to assemble arteries having a planar segmentation. It is based on Sweep Surfaces and can be extended to T- and Y-like bifurcations. A continuous force vector field is described, representing the interaction between the catheter and the surface. The computation time of the force field is almost unaffected when the resolution of the artery is increased. The mechanical properties of arteries play an essential role in the study of the circulatory system dynamics, which has been becoming increasingly important in the treatment of cardiovascular diseases. In Virtual Reality Simulators, it is crucial to have a tissue model that responds in real time. In this work, the arteries are discretized by a two dimensional mesh and the nodes are connected by three kinds of linear springs. Three tissue layers (Intima, Media, Adventitia) are considered and, starting from the stretch-energy density, some of the elasticity tensor components are calculated. The physical model linearizes and homogenizes the material response, but it still contemplates the geometric nonlinearity. In general, if the arterial stretch varies by 1% or less, then the agreement between the linear and nonlinear models is trustworthy. In the last part, the physical model of the wire proposed by Konings is improved. As a result, a simpler and more stable method is obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. The physical and the geometrical methods are merged, resulting in efficient relaxations. Tests show that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions and the hardware to assemble the simulator has a low cost. N2 - Es wird ein vollständiges Simulationssystem entwickelt, das von Ärzten als Lehrmittel zur Ausbildung grundlegender Fertigkeiten bei Herzkathetereingriffen eingesetzt werden kann. Im ersten Teil wird ein Oberflächenmodell zur Erstellung von Arterien mit planarer Segmentierung entwickelt. Im zweiten Teil werden die Arterien durch ein zweidimensionales Netz diskretisiert, die Knoten werden durch drei Arten linearer Federn verbunden und ausgehend von einer Dehnungsenergie-Dichte-Funktion werden einige Komponenten des Elastizitätstensors berechnet. Im letzten Teil wird das von anderen Autoren vorgeschlagene physikalische Modell des Drahtes verbessert und eine neue geometrische Methode entwickelt. Der vorgeschlagene Algorithmus ermöglicht Echtzeit-Ausführungen. Die Hardware des Simulators hat geringe Herstellungskosten. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 15 KW - Computersimulation KW - Simulator KW - Arterie KW - Elastizitätstensor KW - Herzkatheter KW - Minimally invasive vascular intervention KW - Wire relaxation KW - Artery KW - Elasticity tensor KW - Stiffness KW - educational tool KW - Elastizitätstensor KW - Herzkathetereingriff KW - Software KW - Hardware Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161190 SN - 978-3-945459-22-5 ER - TY - JOUR A1 - Zimmerer, Chris A1 - Fischbach, Martin A1 - Latoschik, Marc Erich T1 - Semantic Fusion for Natural Multimodal Interfaces using Concurrent Augmented Transition Networks JF - Multimodal Technologies and Interaction N2 - Semantic fusion is a central requirement of many multimodal interfaces. Procedural methods like finite-state transducers and augmented transition networks have proven to be beneficial to implement semantic fusion. They are compliant with rapid development cycles that are common for the development of user interfaces, in contrast to machine-learning approaches that require time-costly training and optimization. We identify seven fundamental requirements for the implementation of semantic fusion: Action derivation, continuous feedback, context-sensitivity, temporal relation support, access to the interaction context, as well as the support of chronologically unsorted and probabilistic input. A subsequent analysis reveals, however, that there is currently no solution for fulfilling the latter two requirements. As the main contribution of this article, we thus present the Concurrent Cursor concept to compensate these shortcomings. In addition, we showcase a reference implementation, the Concurrent Augmented Transition Network (cATN), that validates the concept’s feasibility in a series of proof of concept demonstrations as well as through a comparative benchmark. The cATN fulfills all identified requirements and fills the lack amongst previous solutions. It supports the rapid prototyping of multimodal interfaces by means of five concrete traits: Its declarative nature, the recursiveness of the underlying transition network, the network abstraction constructs of its description language, the utilized semantic queries, and an abstraction layer for lexical information. Our reference implementation was and is used in various student projects, theses, as well as master-level courses. It is openly available and showcases that non-experts can effectively implement multimodal interfaces, even for non-trivial applications in mixed and virtual reality. KW - multimodal fusion KW - multimodal interface KW - semantic fusion KW - procedural fusion methods KW - natural interfaces KW - human-computer interaction Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197573 SN - 2414-4088 VL - 2 IS - 4 ER - TY - THES A1 - Budig, Benedikt T1 - Extracting Spatial Information from Historical Maps: Algorithms and Interaction T1 - Extraktion räumlicher Informationen aus historischen Landkarten: Algorithmen und Interaktion N2 - Historical maps are fascinating documents and a valuable source of information for scientists of various disciplines. Many of these maps are available as scanned bitmap images, but in order to make them searchable in useful ways, a structured representation of the contained information is desirable. This book deals with the extraction of spatial information from historical maps. This cannot be expected to be solved fully automatically (since it involves difficult semantics), but is also too tedious to be done manually at scale. The methodology used in this book combines the strengths of both computers and humans: it describes efficient algorithms to largely automate information extraction tasks and pairs these algorithms with smart user interactions to handle what is not understood by the algorithm. The effectiveness of this approach is shown for various kinds of spatial documents from the 16th to the early 20th century. N2 - Historische Landkarten sind faszinierende Dokumente und eine wertvolle Informationsquelle für Wissenschaftler verschiedener Fächer. Viele dieser Karten liegen als gescannte Bitmap-Bilder vor, aber um sie auf nützliche Art durchsuchbar zu machen ist eine strukturierte Repräsentation der enthaltenen Informationen wünschenswert. Dieses Buch beschäftigt sich mit der Extraktion räumlicher Informationen aus historischen Landkarten. Man kann nicht erwarten, dass dies vollautomatisch geschieht (da komplizierte Semantik involviert ist), aber es ist auch zu aufwändig, um im großen Stil manuell durchgeführt zu werden. Die Methodik, die in diesem Buch verwendet wird, kombiniert die Stärken von Computern und Menschen: Es werden effiziente Algorithmen beschrieben, die Extraktionsaufgaben weitgehend automatisieren, und dazu passende Nutzerinteraktionen entworfen, mit denen Fälle gelöst werden, die die Algorithmen nicht vestehen. Die Effekitivität dieses Ansatzes wird anhand verschiedener räumlicher Dokumente aus dem 16. bis frühen 20. Jahrhundert gezeigt. KW - Karte KW - Effizienter Algorithmus KW - Interaktion KW - Information Extraction KW - Smart User Interaction KW - Historical Maps KW - Itineraries KW - Deep Georeferencing KW - Benutzerinteraktion KW - Historische Landkarten KW - Itinerare KW - Georeferenzierung KW - Historische Karte KW - Raumdaten Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-160955 SN - 978-3-95826-092-4 SN - 978-3-95826-093-1 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-092-4, 32,90 Euro. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - GEN A1 - Funken, Matthias A1 - Tscherner, Michael T1 - Jahresbericht 2017 des Rechenzentrums der Universität Würzburg T1 - Annual Report 2017 of the Computer Center, University of Wuerzburg N2 - Eine Übersicht über die Aktivitäten des Rechenzentrums im Jahr 2017. T3 - Jahresbericht des Rechenzentrums der Universität Würzburg - 2017 KW - Julius-Maximilians-Universität Würzburg KW - RZUW KW - Jahresbericht KW - Rechenzentrum KW - Computer Center University of Wuerzburg KW - annual report Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-168537 UR - https://www.rz.uni-wuerzburg.de/wir/publikationen/ ET - 1. Auflage ER - TY - JOUR A1 - Nagler, Matthias A1 - Nägele, Thomas A1 - Gilli, Christian A1 - Fragner, Lena A1 - Korte, Arthur A1 - Platzer, Alexander A1 - Farlow, Ashley A1 - Nordborg, Magnus A1 - Weckwerth, Wolfram T1 - Eco-Metabolomics and Metabolic Modeling: Making the Leap From Model Systems in the Lab to Native Populations in the Field JF - Frontiers in Plant Science N2 - Experimental high-throughput analysis of molecular networks is a central approach to characterize the adaptation of plant metabolism to the environment. However, recent studies have demonstrated that it is hardly possible to predict in situ metabolic phenotypes from experiments under controlled conditions, such as growth chambers or greenhouses. This is particularly due to the high molecular variance of in situ samples induced by environmental fluctuations. An approach of functional metabolome interpretation of field samples would be desirable in order to be able to identify and trace back the impact of environmental changes on plant metabolism. To test the applicability of metabolomics studies for a characterization of plant populations in the field, we have identified and analyzed in situ samples of nearby grown natural populations of Arabidopsis thaliana in Austria. A. thaliana is the primary molecular biological model system in plant biology with one of the best functionally annotated genomes representing a reference system for all other plant genome projects. The genomes of these novel natural populations were sequenced and phylogenetically compared to a comprehensive genome database of A. thaliana ecotypes. Experimental results on primary and secondary metabolite profiling and genotypic variation were functionally integrated by a data mining strategy, which combines statistical output of metabolomics data with genome-derived biochemical pathway reconstruction and metabolic modeling. Correlations of biochemical model predictions and population-specific genetic variation indicated varying strategies of metabolic regulation on a population level which enabled the direct comparison, differentiation, and prediction of metabolic adaptation of the same species to different habitats. These differences were most pronounced at organic and amino acid metabolism as well as at the interface of primary and secondary metabolism and allowed for the direct classification of population-specific metabolic phenotypes within geographically contiguous sampling sites. KW - eco-metabolomics KW - in situ analysis KW - metabolomics KW - metabolic modeling KW - SNP KW - natural variation KW - Jacobian matrix KW - green systems biology Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-189560 SN - 1664-462X VL - 9 IS - 1556 ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DLTPulseGenerator: a library for the simulation of lifetime spectra based on detector-output pulses JF - SoftwareX N2 - The quantitative analysis of lifetime spectra relevant in both life and materials sciences presents one of the ill-posed inverse problems and, hence, leads to most stringent requirements on the hardware specifications and the analysis algorithms. Here we present DLTPulseGenerator, a library written in native C++ 11, which provides a simulation of lifetime spectra according to the measurement setup. The simulation is based on pairs of non-TTL detector output-pulses. Those pulses require the Constant Fraction Principle (CFD) for the determination of the exact timing signal and, thus, the calculation of the time difference i.e. the lifetime. To verify the functionality, simulation results were compared to experimentally obtained data using Positron Annihilation Lifetime Spectroscopy (PALS) on pure tin. KW - lifetime spectroscopy KW - signal processing KW - pulse simulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176883 VL - 7 ER - TY - THES A1 - Ostermayer, Ludwig T1 - Integration of Prolog and Java with the Connector Architecture CAPJa T1 - Integration von Prolog und Java mit Hilfe der Connector Architecture CAPJa N2 - Modern software is often realized as a modular combination of subsystems for, e. g., knowledge management, visualization, verification, or the interaction with users. As a result, software libraries from possibly different programming languages have to work together. Even more complex the case is if different programming paradigms have to be combined. This type of diversification of programming languages and paradigms in just one software application can only be mastered by mechanisms for a seamless integration of the involved programming languages. However, the integration of the common logic programming language Prolog and the popular object-oriented programming language Java is complicated by various interoperability problems which stem on the one hand from the paradigmatic gap between the programming languages, and on the other hand, from the diversity of the available Prolog systems. The subject of the thesis is the investigation of novel mechanisms for the integration of logic programming in Prolog and object–oriented programming in Java. We are particularly interested in an object–oriented, uniform approach which is not specific to just one Prolog system. Therefore, we have first identified several important criteria for the seamless integration of Prolog and Java from the object–oriented perspective. The main contribution of the thesis is a novel integration framework called the Connector Architecture for Prolog and Java (CAPJa). The framework is completely implemented in Java and imposes no modifications to the Java Virtual Machine or Prolog. CAPJa provides a semi–automated mechanism for the integration of Prolog predicates into Java. For compact, readable, and object–oriented queries to Prolog, CAPJa exploits lambda expressions with conditional and relational operators in Java. The communication between Java and Prolog is based on a fully automated mapping of Java objects to Prolog terms, and vice versa. In Java, an extensible system of gateways provides connectivity with various Prolog system and, moreover, makes any connected Prolog system easily interchangeable, without major adaption in Java. N2 - Moderne Software ist oft modular zusammengesetzt aus Subsystemen zur Wissensverwaltung, Visualisierung, Verfikation oder Benutzerinteraktion. Dabei müssen Programmbibliotheken aus möglicherweise verschiedenen Programmiersprachen miteinander zusammenarbeiten. Noch komplizierter ist der Fall, wenn auch noch verschiedene Programmierparadigmen miteinander kombiniert werden. Diese Art der Diversifikation an Programmiersprachen und –paradigmen in nur einer Software kann nur von nahtlosen Integrationsmechansimen für die beteiligten Programmiersprachen gemeistert werden. Gerade die Einbindung der gängigen Logikprogrammiersprache Prolog und der populären objektorientierten Programmiersprache Java wird durch zahlreiche Kompatibilitätsprobleme erschwert, welche auf der einen Seite von paradigmatischen Unterschieden der beiden Programmiersprachen herrühren und auf der anderen Seite von der Vielfalt der erhältlichen Prologimplementierungen. Gegenstand dieser Arbeit ist die Untersuchung von neuartigen Mechanismen für die Zusammenführung von Logikprogrammierung in Prolog und objektorienter Programmierung in Java. Besonders interessiert uns dabei ein objektorientierter, einheitlicher Ansatz, der nicht auf eine konkrete Prologimplementierung festgelegt ist. Aus diesem Grund haben wir zunächst wichtige Kriterien für die nahtlose Integration von Prolog und Java aus der objetorientierten Sicht identifziert. Der Hauptbeitrag dieser Arbeit ist ein neuartiges Integrationssystems, welches Connector Architecture for Prolog and Java (CAPJa) heißt. Das System ist komplett in Java implementiert und benötigt keine Anpassungen der Java Virtual Machine oder Prolog. CAPJa stellt einen halbautomatischen Mechanismus zur Vernetzung von Prolog Prädikaten mit Java zur Verfügung. Für kompakte, lesbare und objektorientierte Anfragen an Prolog nutzt CAPJa Lambdaausdrücke mit logischen und relationalen Operatoren in Java. Die Kommunikation zwischen Java und Prolog basiert auf einer automatisierten Abbildung von Java Objekten auf Prolog Terme, und umgekehrt. In Java bietet ein erweiterbares System von Schnittstellen Konnektivität zu einer Vielzahl an Prologimplmentierung und macht darüber hinaus jede verbundene Prologimplementierung einfach austauschbar, und zwar ohne größere Anpassung in Java. KW - Logische Programmierung KW - Objektorientierte Programmierung KW - PROLOG KW - Java KW - Multi-Paradigm Programming KW - Logic Programming KW - Object-Oriented Programming KW - Multi-Paradigm Programming Framework Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150713 ER - TY - THES A1 - Aschenbrenner, Doris T1 - Human Robot Interaction Concepts for Human Supervisory Control and Telemaintenance Applications in an Industry 4.0 Environment T1 - Mensch-Roboter-Interaktionskonzepte für Fernsteuerungs- und Fernwartungsanwendungen in einer Industrie 4.0 Umgebung N2 - While teleoperation of technical highly sophisticated systems has already been a wide field of research, especially for space and robotics applications, the automation industry has not yet benefited from its results. Besides the established fields of application, also production lines with industrial robots and the surrounding plant components are in need of being remotely accessible. This is especially critical for maintenance or if an unexpected problem cannot be solved by the local specialists. Special machine manufacturers, especially robotics companies, sell their technology worldwide. Some factories, for example in emerging economies, lack qualified personnel for repair and maintenance tasks. When a severe failure occurs, an expert of the manufacturer needs to fly there, which leads to long down times of the machine or even the whole production line. With the development of data networks, a huge part of those travels can be omitted, if appropriate teleoperation equipment is provided. This thesis describes the development of a telemaintenance system, which was established in an active production line for research purposes. The customer production site of Braun in Marktheidenfeld, a factory which belongs to Procter & Gamble, consists of a six-axis cartesian industrial robot by KUKA Industries, a two-component injection molding system and an assembly unit. The plant produces plastic parts for electric toothbrushes. In the research projects "MainTelRob" and "Bayern.digital", during which this plant was utilised, the Zentrum für Telematik e.V. (ZfT) and its project partners develop novel technical approaches and procedures for modern telemaintenance. The term "telemaintenance" hereby refers to the integration of computer science and communication technologies into the maintenance strategy. It is particularly interesting for high-grade capital-intensive goods like industrial robots. Typical telemaintenance tasks are for example the analysis of a robot failure or difficult repair operations. The service department of KUKA Industries is responsible for the worldwide distributed customers who own more than one robot. Currently such tasks are offered via phone support and service staff which travels abroad. They want to expand their service activities on telemaintenance and struggle with the high demands of teleoperation especially regarding security infrastructure. In addition, the facility in Marktheidenfeld has to keep up with the high international standards of Procter & Gamble and wants to minimize machine downtimes. Like 71.6 % of all German companies, P&G sees a huge potential for early information on their production system, but complains about the insufficient quality and the lack of currentness of data. The main research focus of this work lies on the human machine interface for all human tasks in a telemaintenance setup. This thesis provides own work in the use of a mobile device in context of maintenance, describes new tools on asynchronous remote analysis and puts all parts together in an integrated telemaintenance infrastructure. With the help of Augmented Reality, the user performance and satisfaction could be raised. A special regard is put upon the situation awareness of the remote expert realized by different camera viewpoints. In detail the work consists of: - Support of maintenance tasks with a mobile device - Development and evaluation of a context-aware inspection tool - Comparison of a new touch-based mobile robot programming device to the former teach pendant - Study on Augmented Reality support for repair tasks with a mobile device - Condition monitoring for a specific plant with industrial robot - Human computer interaction for remote analysis of a single plant cycle - A big data analysis tool for a multitude of cycles and similar plants - 3D process visualization for a specific plant cycle with additional virtual information - Network architecture in hardware, software and network infrastructure - Mobile device computer supported collaborative work for telemaintenance - Motor exchange telemaintenance example in running production environment - Augmented reality supported remote plant visualization for better situation awareness N2 - Die Fernsteuerung technisch hochentwickelter Systeme ist seit vielen Jahren ein breites Forschungsfeld, vor allem im Bereich von Weltraum- und Robotikanwendungen. Allerdings hat die Automatisierungsindustrie bislang zu wenig von den Ergebnissen dieses Forschungsgebiets profitiert. Auch Fertigungslinien mit Industrierobotern und weiterer Anlagenkomponenten müssen über die Ferne zugänglich sein, besonders bei Wartungsfällen oder wenn unvorhergesehene Probleme nicht von den lokalen Spezialisten gelöst werden können. Hersteller von Sondermaschinen wie Robotikfirmen verkaufen ihre Technologie weltweit. Kunden dieser Firmen besitzen beispielsweise Fabriken in Schwellenländern, wo es an qualifizierten Personal für Reparatur und Wartung mangelt. Wenn ein ernster Fehler auftaucht, muss daher ein Experte des Sondermaschinenherstellers zum Kunden fliegen. Das führt zu langen Stillstandzeiten der Maschine. Durch die Weiterentwicklung der Datennetze könnte ein großer Teil dieser Reisen unterbleiben, wenn eine passende Fernwartungsinfrastruktur vorliegen würde. Diese Arbeit beschreibt die Entwicklung eines Fernwartungssystems, welches in einer aktiven Produktionsumgebung für Forschungszwecke eingerichtet wurde. Die Fertigungsanlage des Kunden wurde von Procter & Gamble in Marktheidenfeld zur Verfügung gestellt und besteht aus einem sechsachsigen, kartesischen Industrieroboter von KUKA Industries, einer Zweikomponentenspritzgussanlage und einer Montageeinheit. Die Anlage produziert Plastikteile für elektrische Zahnbürsten. Diese Anlage wurde im Rahmen der Forschungsprojekte "MainTelRob" und "Bayern.digital" verwendet, in denen das Zentrum für Telematik e.V. (ZfT) und seine Projektpartner neue Ansätze und Prozeduren für moderne Fernwartungs-Technologien entwickeln. Fernwartung bedeutet für uns die umfassende Integration von Informatik und Kommunikationstechnologien in der Wartungsstrategie. Das ist vor allem für hochentwickelte, kapitalintensive Güter wie Industrierobotern interessant. Typische Fernwartungsaufgaben sind beispielsweise die Analyse von Roboterfehlermeldungen oder schwierige Reparaturmaßnahmen. Die Service-Abteilung von KUKA Industries ist für die weltweit verteilten Kunden zuständig, die teilweise auch mehr als einen Roboter besitzen. Aktuell werden derartige Aufgaben per Telefonauskunft oder mobilen Servicekräften, die zum Kunden reisen, erledigt. Will man diese komplizierten Aufgaben durch Fernwartung ersetzen um die Serviceaktivitäten auszuweiten muss man mit den hohen Anforderungen von Fernsteuerung zurechtkommen, besonders in Bezug auf Security Infrastruktur. Eine derartige umfassende Herangehensweise an Fernwartung bietet aber auch einen lokalen Mehrwert beim Kunden: Die Fabrik in Marktheidenfeld muss den hohen internationalen Standards von Procter & Gamble folgen und will daher die Stillstandzeiten weiter verringern. Wie 71,6 Prozent aller deutschen Unternehmen sieht auch P&G Marktheidenfeld ein großes Potential für frühe Informationen aus ihrem Produktionssystem, haben aber aktuell noch Probleme mit der Aktualität und Qualität dieser Daten. Der Hauptfokus der hier vorgestellten Forschung liegt auf der Mensch-Maschine-Schnittstelle für alle Aufgaben eines umfassenden Fernwartungskontextes. Diese Arbeit stellt die eigene Arbeiten bei der Verwendung mobiler Endgeräte im Kontext der Wartung und neue Softwarewerkzeuge für die asynchrone Fernanalyse vor und integriert diese Aspekte in eine Fernwartungsinfrastruktur. In diesem Kontext kann gezeigt werden, dass der Einsatz von Augmented Reality die Nutzerleistung und gleichzeitig die Zufriedenheit steigern kann. Dabei wird auf das sogenannte "situative Bewusstsein" des entfernten Experten besonders Wert gelegt. Im Detail besteht die Arbeit aus: - Unterstützung von Wartungsaufgaben mit mobilen Endgeräten - Entwicklung und Evaluation kontextsensitiver Inspektionssoftware - Vergleich von touch-basierten Roboterprogrammierung mit der Vorgängerversion des Programmierhandgeräts - Studien über die Unterstützung von Reparaturaufgaben durch Augmented Reality - Zustandsüberwachung für eine spezielle Anlage mit Industrieroboter - Mensch-Maschine Interaktion für die Teleanalyse eines Produktionszyklus - Grafische Big Data Analyse einer Vielzahl von Produktionszyklen - 3D Prozess Visualisierung und Anreicherung mit virtuellen Informationen - Hardware, Software und Netzwerkarchitektur für die Fernwartung - Computerunterstützte Zusammenarbeit mit Verwendung mobiler Endgeräte für die Fernwartung - Fernwartungsbeispiel: Durchführung eines Motortauschs in der laufenden Produktion - Augmented Reality unterstütze Visualisierung des Anlagenkontextes für die Steigerung des situativen Bewusstseins T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 13 KW - Fernwartung KW - Robotik KW - Mensch-Maschine-Schnittstelle KW - Erweiterte Realität KW - Situation Awareness KW - Industrie 4.0 KW - Industrial internet Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150520 SN - 978-3-945459-18-8 ER - TY - THES A1 - Houshiar, Hamidreza T1 - Documentation and mapping with 3D point cloud processing T1 - Dokumentation und Kartierung mittels 3D-Punktwolkenverarbeitung N2 - 3D point clouds are a de facto standard for 3D documentation and modelling. The advances in laser scanning technology broadens the usability and access to 3D measurement systems. 3D point clouds are used in many disciplines such as robotics, 3D modelling, archeology and surveying. Scanners are able to acquire up to a million of points per second to represent the environment with a dense point cloud. This represents the captured environment with a very high degree of detail. The combination of laser scanning technology with photography adds color information to the point clouds. Thus the environment is represented more realistically. Full 3D models of environments, without any occlusion, require multiple scans. Merging point clouds is a challenging process. This thesis presents methods for point cloud registration based on the panorama images generated from the scans. Image representation of point clouds introduces 2D image processing methods to 3D point clouds. Several projection methods for the generation of panorama maps of point clouds are presented in this thesis. Additionally, methods for point cloud reduction and compression based on the panorama maps are proposed. Due to the large amounts of data generated from the 3D measurement systems these methods are necessary to improve the point cloud processing, transmission and archiving. This thesis introduces point cloud processing methods as a novel framework for the digitisation of archeological excavations. The framework replaces the conventional documentation methods for excavation sites. It employs point clouds for the generation of the digital documentation of an excavation with the help of an archeologist on-site. The 3D point cloud is used not only for data representation but also for analysis and knowledge generation. Finally, this thesis presents an autonomous indoor mobile mapping system. The mapping system focuses on the sensor placement planning method. Capturing a complete environment requires several scans. The sensor placement planning method solves for the minimum required scans to digitise large environments. Combining this method with a navigation system on a mobile robot platform enables it to acquire data fully autonomously. This thesis introduces a novel hole detection method for point clouds to detect obscured parts of a captured environment. The sensor placement planning method selects the next scan position with the most coverage of the obscured environment. This reduces the required number of scans. The navigation system on the robot platform consist of path planning, path following and obstacle avoidance. This guarantees the safe navigation of the mobile robot platform between the scan positions. The sensor placement planning method is designed as a stand alone process that could be used with a mobile robot platform for autonomous mapping of an environment or as an assistant tool for the surveyor on scanning projects. N2 - 3D-Punktwolken sind der de facto Standard bei der Dokumentation und Modellierung in 3D. Die Fortschritte in der Laserscanningtechnologie erweitern die Verwendbarkeit und die Verfügbarkeit von 3D-Messsystemen. 3D-Punktwolken werden in vielen Disziplinen verwendet, wie z.B. in der Robotik, 3D-Modellierung, Archäologie und Vermessung. Scanner sind in der Lage bis zu einer Million Punkte pro Sekunde zu erfassen, um die Umgebung mit einer dichten Punktwolke abzubilden und mit einem hohen Detaillierungsgrad darzustellen. Die Kombination der Laserscanningtechnologie mit Methoden der Photogrammetrie fügt den Punktwolken Farbinformationen hinzu. Somit wird die Umgebung realistischer dargestellt. Vollständige 3D-Modelle der Umgebung ohne Verschattungen benötigen mehrere Scans. Punktwolken zusammenzufügen ist eine anspruchsvolle Aufgabe. Diese Arbeit stellt Methoden zur Punktwolkenregistrierung basierend auf aus den Scans erzeugten Panoramabildern vor. Die Darstellung einer Punktwolke als Bild bringt Methoden der 2D-Bildverarbeitung an 3D-Punktwolken heran. Der Autor stellt mehrere Projektionsmethoden zur Erstellung von Panoramabildern aus 3D-Punktwolken vor. Außerdem werden Methoden zur Punktwolkenreduzierung und -kompression basierend auf diesen Panoramabildern vorgeschlagen. Aufgrund der großen Datenmenge, die von 3D-Messsystemen erzeugt wird, sind diese Methoden notwendig, um die Punktwolkenverarbeitung, -übertragung und -archivierung zu verbessern. Diese Arbeit präsentiert Methoden der Punktwolkenverarbeitung als neuartige Ablaufstruktur für die Digitalisierung von archäologischen Ausgrabungen. Durch diesen Ablauf werden konventionellen Methoden auf Ausgrabungsstätten ersetzt. Er verwendet Punktwolken für die Erzeugung der digitalen Dokumentation einer Ausgrabung mithilfe eines Archäologen vor Ort. Die 3D-Punktwolke kommt nicht nur für die Anzeige der Daten, sondern auch für die Analyse und Wissensgenerierung zum Einsatz. Schließlich stellt diese Arbeit ein autonomes Indoor-Mobile-Mapping-System mit Fokus auf der Positionsplanung des Messgeräts vor. Die Positionsplanung bestimmt die minimal benötigte Anzahl an Scans, um großflächige Umgebungen zu digitalisieren. Kombiniert mit einem Navigationssystem auf einer mobilen Roboterplattform ermöglicht diese Methode die vollautonome Datenerfassung. Diese Arbeit stellt eine neuartige Erkennungsmethode für Lücken in Punktwolken vor, um verdeckte Bereiche der erfassten Umgebung zu bestimmen. Die Positionsplanung bestimmt als nächste Scanposition diejenige mit der größten Abdeckung der verdeckten Umgebung. Das Navigationssystem des Roboters besteht aus der Pfadplanung, der Pfadverfolgung und einer Hindernisvermeidung um eine sichere Fortbewegung der mobilen Roboterplattform zwischen den Scanpositionen zu garantieren. Die Positionsplanungsmethode wurde als eigenständiges Verfahren entworfen, das auf einer mobilen Roboterplattform zur autonomen Kartierung einer Umgebung zum Einsatz kommen oder einem Vermesser bei einem Scanprojekt als Unterstützung dienen kann. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 12 KW - 3D Punktwolke KW - Robotik KW - Registrierung KW - 3D Pointcloud KW - Feature Based Registration KW - Compression KW - Computer Vision KW - Robotics KW - Panorama Images Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-144493 SN - 978-3-945459-14-0 ER - TY - JOUR A1 - Kaltdorf, Kristin Verena A1 - Schulze, Katja A1 - Helmprobst, Frederik A1 - Kollmannsberger, Philip A1 - Dandekar, Thomas A1 - Stigloher, Christian T1 - Fiji macro 3D ART VeSElecT: 3D automated reconstruction tool for vesicle structures of electron tomograms JF - PLoS Computational Biology N2 - Automatic image reconstruction is critical to cope with steadily increasing data from advanced microscopy. We describe here the Fiji macro 3D ART VeSElecT which we developed to study synaptic vesicles in electron tomograms. We apply this tool to quantify vesicle properties (i) in embryonic Danio rerio 4 and 8 days past fertilization (dpf) and (ii) to compare Caenorhabditis elegans N2 neuromuscular junctions (NMJ) wild-type and its septin mutant (unc-59(e261)). We demonstrate development-specific and mutant-specific changes in synaptic vesicle pools in both models. We confirm the functionality of our macro by applying our 3D ART VeSElecT on zebrafish NMJ showing smaller vesicles in 8 dpf embryos then 4 dpf, which was validated by manual reconstruction of the vesicle pool. Furthermore, we analyze the impact of C. elegans septin mutant unc-59(e261) on vesicle pool formation and vesicle size. Automated vesicle registration and characterization was implemented in Fiji as two macros (registration and measurement). This flexible arrangement allows in particular reducing false positives by an optional manual revision step. Preprocessing and contrast enhancement work on image-stacks of 1nm/pixel in x and y direction. Semi-automated cell selection was integrated. 3D ART VeSElecT removes interfering components, detects vesicles by 3D segmentation and calculates vesicle volume and diameter (spherical approximation, inner/outer diameter). Results are collected in color using the RoiManager plugin including the possibility of manual removal of non-matching confounder vesicles. Detailed evaluation considered performance (detected vesicles) and specificity (true vesicles) as well as precision and recall. We furthermore show gain in segmentation and morphological filtering compared to learning based methods and a large time gain compared to manual segmentation. 3D ART VeSElecT shows small error rates and its speed gain can be up to 68 times faster in comparison to manual annotation. Both automatic and semi-automatic modes are explained including a tutorial. KW - Biology KW - Vesicles KW - Caenorhabditis elegans KW - Zebrafish KW - Septins KW - Synaptic vesicles KW - Neuromuscular junctions KW - Computer software KW - Synapses Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172112 VL - 13 IS - 1 ER - TY - GEN T1 - Jahresbericht 2016 des Rechenzentrums der Universität Würzburg T1 - Annual Report 2016 of the Computer Center, University of Wuerzburg N2 - Das Dokument umfasst eine jährliche Zusammenfassung der Aktivitäten des Rechenzentrums als zentraler IT-Dienstleister der Universität Würzburg T3 - Jahresbericht des Rechenzentrums der Universität Würzburg - 2016 KW - Jahresbericht KW - Julius-Maximilians-Universität Würzburg KW - Rechenzentrum KW - annual report KW - Computer Center University of Wuerzburg KW - RZUW Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153558 UR - https://www.rz.uni-wuerzburg.de/wir/publikationen/ ET - 1. Auflage ER - TY - JOUR A1 - von Mammen, Sebastian Albrecht A1 - Wagner, Daniel A1 - Knote, Andreas A1 - Taskin, Umut T1 - Interactive simulations of biohybrid systems JF - Frontiers in Robotics and AI N2 - In this article, we present approaches to interactive simulations of biohybrid systems. These simulations are comprised of two major computational components: (1) agent-based developmental models that retrace organismal growth and unfolding of technical scaffoldings and (2) interfaces to explore these models interactively. Simulations of biohybrid systems allow us to fast forward and experience their evolution over time based on our design decisions involving the choice, configuration and initial states of the deployed biological and robotic actors as well as their interplay with the environment. We briefly introduce the concept of swarm grammars, an agent-based extension of L-systems for retracing growth processes and structural artifacts. Next, we review an early augmented reality prototype for designing and projecting biohybrid system simulations into real space. In addition to models that retrace plant behaviors, we specify swarm grammar agents to braid structures in a self-organizing manner. Based on this model, both robotic and plant-driven braiding processes can be experienced and explored in virtual worlds. We present an according user interface for use in virtual reality. As we present interactive models concerning rather diverse description levels, we only ensured their principal capacity for interaction but did not consider efficiency analyzes beyond prototypic operation. We conclude this article with an outlook on future works on melding reality and virtuality to drive the design and deployment of biohybrid systems. KW - biohybrid systems KW - augmented reality KW - virtual reality KW - user interfaces KW - biological development KW - generative systems Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-195755 SN - 2296-9144 VL - 4 ER - TY - JOUR A1 - Fisseler, Denis A1 - Müller, Gerfrid G. W. A1 - Weichert, Frank T1 - Web-Based scientific exploration and analysis of 3D scanned cuneiform datasets for collaborative research JF - Informatics N2 - The three-dimensional cuneiform script is one of the oldest known writing systems and a central object of research in Ancient Near Eastern Studies and Hittitology. An important step towards the understanding of the cuneiform script is the provision of opportunities and tools for joint analysis. This paper presents an approach that contributes to this challenge: a collaborative compatible web-based scientific exploration and analysis of 3D scanned cuneiform fragments. The WebGL -based concept incorporates methods for compressed web-based content delivery of large 3D datasets and high quality visualization. To maximize accessibility and to promote acceptance of 3D techniques in the field of Hittitology, the introduced concept is integrated into the Hethitologie-Portal Mainz, an established leading online research resource in the field of Hittitology, which until now exclusively included 2D content. The paper shows that increasing the availability of 3D scanned archaeological data through a web-based interface can provide significant scientific value while at the same time finding a trade-off between copyright induced restrictions and scientific usability. KW - cuneiform KW - 3D viewer KW - WebGL KW - Hittitology KW - 3D collation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197958 SN - 2227-9709 VL - 4 IS - 4 ER - TY - JOUR A1 - Kunz, Meik A1 - Liang, Chunguang A1 - Nilla, Santosh A1 - Cecil, Alexander A1 - Dandekar, Thomas T1 - The drug-minded protein interaction database (DrumPID) for efficient target analysis and drug development JF - Database N2 - The drug-minded protein interaction database (DrumPID) has been designed to provide fast, tailored information on drugs and their protein networks including indications, protein targets and side-targets. Starting queries include compound, target and protein interactions and organism-specific protein families. Furthermore, drug name, chemical structures and their SMILES notation, affected proteins (potential drug targets), organisms as well as diseases can be queried including various combinations and refinement of searches. Drugs and protein interactions are analyzed in detail with reference to protein structures and catalytic domains, related compound structures as well as potential targets in other organisms. DrumPID considers drug functionality, compound similarity, target structure, interactome analysis and organismic range for a compound, useful for drug development, predicting drug side-effects and structure–activity relationships. KW - drug-minded protein KW - database Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147369 VL - 2016 ER -