TY - JOUR A1 - Andronic, Joseph A1 - Shirakashi, Ryo A1 - Pickel, Simone U. A1 - Westerling, Katherine M. A1 - Klein, Teresa A1 - Holm, Thorge A1 - Sauer, Markus A1 - Sukhorukov, Vladimir L. T1 - Hypotonic Activation of the Myo-Inositol Transporter SLC5A3 in HEK293 Cells Probed by Cell Volumetry, Confocal and Super-Resolution Microscopy JF - PLoS One N2 - Swelling-activated pathways for myo-inositol, one of the most abundant organic osmolytes in mammalian cells, have not yet been identified. The present study explores the SLC5A3 protein as a possible transporter of myo-inositol in hyponically swollen HEK293 cells. To address this issue, we examined the relationship between the hypotonicity-induced changes in plasma membrane permeability to myo-inositol Pino [m/s] and expression/localization of SLC5A3. Pino values were determined by cell volumetry over a wide tonicity range (100–275 mOsm) in myo-inositol-substituted solutions. While being negligible under mild hypotonicity (200–275 mOsm), Pino grew rapidly at osmolalities below 200 mOsm to reach a maximum of ∼3 nm/s at 100–125 mOsm, as indicated by fast cell swelling due to myo-inositol influx. The increase in Pino resulted most likely from the hypotonicity-mediated incorporation of cytosolic SLC5A3 into the plasma membrane, as revealed by confocal fluorescence microscopy of cells expressing EGFP-tagged SLC5A3 and super-resolution imaging of immunostained SLC5A3 by direct stochastic optical reconstruction microscopy (dSTORM). dSTORM in hypotonic cells revealed a surface density of membrane-associated SLC5A3 proteins of 200–2000 localizations/μm2. Assuming SLC5A3 to be the major path for myo-inositol, a turnover rate of 80–800 myo-inositol molecules per second for a single transporter protein was estimated from combined volumetric and dSTORM data. Hypotonic stress also caused a significant upregulation of SLC5A3 gene expression as detected by semiquantitative RT-PCR and Western blot analysis. In summary, our data provide first evidence for swelling-mediated activation of SLC5A3 thus suggesting a functional role of this transporter in hypotonic volume regulation of mammalian cells. KW - electrolytes KW - isotonic KW - membrane proteins KW - cell membranes KW - hypotonic KW - hypotonic solutions KW - tonicity KW - permeability Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126408 VL - 10 IS - 3 ER - TY - JOUR A1 - Weiß, Clemens Leonard A1 - Schultz, Jörg T1 - Identification of divergent WH2 motifs by HMM-HMM alignments JF - BMC Research Notes N2 - Background The actin cytoskeleton is a hallmark of eukaryotic cells. Its regulation as well as its interaction with other proteins is carefully orchestrated by actin interaction domains. One of the key players is the WH2 motif, which enables binding to actin monomers and filaments and is involved in the regulation of actin nucleation. Contrasting conserved domains, the identification of this motif in protein sequences is challenging, as it is short and poorly conserved. Findings To identify divergent members, we combined Hidden-Markov-Model (HMM) to HMM alignments with orthology predictions. Thereby, we identified nearly 500 proteins containing so far not annotated WH2 motifs. This included shootin-1, an actin binding protein involved in neuron polarization. Among others, WH2 motifs of ‘proximal to raf’ (ptr)-orthologs, which are described in the literature, but not annotated in genome databases, were identified. Conclusion In summary, we increased the number of WH2 motif containing proteins substantially. This identification of candidate regions for actin interaction could steer their experimental characterization. Furthermore, the approach outlined here can easily be adapted to the identification of divergent members of further domain families. KW - WH2 domain KW - spire KW - shootin-1 KW - actin nucleation KW - HHblits Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-126413 VL - 8 IS - 18 ER - TY - JOUR A1 - Toepfer, Martin A1 - Corovic, Hamo A1 - Fette, Georg A1 - Klügl, Peter A1 - Störk, Stefan A1 - Puppe, Frank T1 - Fine-grained information extraction from German transthoracic echocardiography reports JF - BMC Medical Informatics and Decision Making N2 - Background Information extraction techniques that get structured representations out of unstructured data make a large amount of clinically relevant information about patients accessible for semantic applications. These methods typically rely on standardized terminologies that guide this process. Many languages and clinical domains, however, lack appropriate resources and tools, as well as evaluations of their applications, especially if detailed conceptualizations of the domain are required. For instance, German transthoracic echocardiography reports have not been targeted sufficiently before, despite of their importance for clinical trials. This work therefore aimed at development and evaluation of an information extraction component with a fine-grained terminology that enables to recognize almost all relevant information stated in German transthoracic echocardiography reports at the University Hospital of Würzburg. Methods A domain expert validated and iteratively refined an automatically inferred base terminology. The terminology was used by an ontology-driven information extraction system that outputs attribute value pairs. The final component has been mapped to the central elements of a standardized terminology, and it has been evaluated according to documents with different layouts. Results The final system achieved state-of-the-art precision (micro average.996) and recall (micro average.961) on 100 test documents that represent more than 90 % of all reports. In particular, principal aspects as defined in a standardized external terminology were recognized with f 1=.989 (micro average) and f 1=.963 (macro average). As a result of keyword matching and restraint concept extraction, the system obtained high precision also on unstructured or exceptionally short documents, and documents with uncommon layout. Conclusions The developed terminology and the proposed information extraction system allow to extract fine-grained information from German semi-structured transthoracic echocardiography reports with very high precision and high recall on the majority of documents at the University Hospital of Würzburg. Extracted results populate a clinical data warehouse which supports clinical research. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-125509 VL - 15 IS - 91 ER - TY - JOUR A1 - Kuhn, Joachim A1 - Gripp, Tatjana A1 - Flieder, Tobias A1 - Dittrich, Marcus A1 - Hendig, Doris A1 - Busse, Jessica A1 - Knabbe, Cornelius A1 - Birschmann, Ingvild T1 - UPLC-MRM Mass Spectrometry Method for Measurement of the Coagulation Inhibitors Dabigatran and Rivaroxaban in Human Plasma and Its Comparison with Functional Assays JF - PLOS ONE N2 - Introduction The fast, precise, and accurate measurement of the new generation of oral anticoagulants such as dabigatran and rivaroxaban in patients' plasma my provide important information in different clinical circumstances such as in the case of suspicion of overdose, when patients switch from existing oral anticoagulant, in patients with hepatic or renal impairment, by concomitant use of interaction drugs, or to assess anticoagulant concentration in patients' blood before major surgery. Methods Here, we describe a quick and precise method to measure the coagulation inhibitors dabigatran and rivaroxaban using ultra-performance liquid chromatography electrospray ionization-tandem mass spectrometry in multiple reactions monitoring (MRM) mode (UPLC-MRM MS). Internal standards (ISs) were added to the sample and after protein precipitation; the sample was separated on a reverse phase column. After ionization of the analytes the ions were detected using electrospray ionization-tandem mass spectrometry. Run time was 2.5 minutes per injection. Ion suppression was characterized by means of post-column infusion. Results The calibration curves of dabigatran and rivaroxaban were linear over the working range between 0.8 and 800 mu g/L (r > 0.99). Limits of detection (LOD) in the plasma matrix were 0.21 mu g/L for dabigatran and 0.34 mu g/L for rivaroxaban, and lower limits of quantification (LLOQ) in the plasma matrix were 0.46 mu g/L for dabigatran and 0.54 mu g/L for rivaroxaban. The intraassay coefficients of variation (CVs) for dabigatran and rivaroxaban were < 4% and 6%; respectively, the interassay CVs were < 6% for dabigatran and < 9% for rivaroxaban. Inaccuracy was < 5% for both substances. The mean recovery was 104.5% (range 83.8-113.0%) for dabigatran and 87.0%(range 73.6-105.4%) for rivaroxaban. No significant ion suppressions were detected at the elution times of dabigatran or rivaroxaban. Both coagulation inhibitors were stable in citrate plasma at -20 degrees C, 4 degrees C and even at RT for at least one week. A method comparison between our UPLC-MRM MS method, the commercially available automated Direct Thrombin Inhibitor assay (DTI assay) for dabigatran measurement from CoaChrom Diagnostica, as well as the automated anti-Xa assay for rivaroxaban measurement from Chromogenix both performed by ACL-TOP showed a high degree of correlation. However, UPLC-MRM MS measurement of dabigatran and rivaroxaban has a much better selectivity than classical functional assays measuring activities of various coagulation factors which are susceptible to interference by other coagulant drugs. Conclusions Overall, we developed and validated a sensitive and specific UPLC-MRM MS assay for the quick and specific measurement of dabigatran and rivaroxaban in human plasma. KW - LC-MS/MS KW - validation KW - serum KW - quantification KW - apixaban KW - diagnostic accuracy KW - performance liquid chromatography KW - factor XA inhibitor KW - direct oral anticoagulants KW - direct thrombin inhibitor Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136023 VL - 10 IS - 12 ER - TY - JOUR A1 - Singh, Amit K. A1 - Kingston, Joseph J. A1 - Gupta, Shishir K. A1 - Batra, Harsh V. T1 - Recombinant Bivalent Fusion Protein rVE Induces CD4+ and CD8+ T-Cell Mediated Memory Immune Response for Protection Against Yersinia enterocolitica Infection JF - Frontiers in Microbiology N2 - Studies investigating the correlates of immune protection against Yersinia infection have established that both humoral and cell mediated immune responses are required for the comprehensive protection. In our previous study, we established that the bivalent fusion protein (rVE) comprising immunologically active regions of Y pestis LcrV (100-270 aa) and YopE (50-213 aa) proteins conferred complete passive and active protection against lethal Y enterocolitica 8081 challenge. In the present study, cohort of BALB/c mice immunized with rVE or its component proteins rV, rE were assessed for cell mediated immune responses and memory immune protection against Y enterocolitica 8081 rVE immunization resulted in extensive proliferation of both CD4 and CD8 T cell subsets; significantly high antibody titer with balanced IgG1: IgG2a/IgG2b isotypes (1:1 ratio) and up regulation of both Th1 (INF-\(\alpha\), IFN-\(\gamma\), IL 2, and IL 12) and Th2 (IL 4) cytokines. On the other hand, rV immunization resulted in Th2 biased IgG response (11:1 ratio) and proliferation of CD4+ T-cell; rE group of mice exhibited considerably lower serum antibody titer with predominant Th1 response (1:3 ratio) and CD8+ T-cell proliferation. Comprehensive protection with superior survival (100%) was observed among rVE immunized mice when compared to the significantly lower survival rates among rE (37.5%) and rV (25%) groups when IP challenged with Y enterocolitica 8081 after 120 days of immunization. Findings in this and our earlier studies define the bivalent fusion protein rVE as a potent candidate vaccine molecule with the capability to concurrently stimulate humoral and cell mediated immune responses and a proof of concept for developing efficient subunit vaccines against Gram negative facultative intracellular bacterial pathogens. KW - I-tasser KW - Yersinia enterocolitica KW - memory immune responses KW - cytokine profiling KW - CD8+T cells KW - CD4+T cells KW - recombinant protein rVE KW - resistance KW - pneumonic plague KW - pestis infection KW - nonhuman-primates KW - III secretion KW - V-antigen KW - mice KW - vaccine Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136114 VL - 6 IS - 1407 ER - TY - THES A1 - Ullmann, Tobias T1 - Characterization of Arctic Environment by Means of Polarimetric Synthetic Aperture Radar (PolSAR) Data and Digital Elevation Models (DEM) T1 - Charakterisierung der arktischen Landoberfläche mittels polarimetrischer Radardaten (PolSAR) und digitalen Höhenmodellen (DEM) N2 - The ecosystem of the high northern latitudes is affected by the recently changing environmental conditions. The Arctic has undergone a significant climatic change over the last decades. The land coverage is changing and a phenological response to the warming is apparent. Remotely sensed data can assist the monitoring and quantification of these changes. The remote sensing of the Arctic was predominantly carried out by the usage of optical sensors but these encounter problems in the Arctic environment, e.g. the frequent cloud cover or the solar geometry. In contrast, the imaging of Synthetic Aperture Radar is not affected by the cloud cover and the acquisition of radar imagery is independent of the solar illumination. The objective of this work was to explore how polarimetric Synthetic Aperture Radar (PolSAR) data of TerraSAR-X, TanDEM-X, Radarsat-2 and ALOS PALSAR and interferometric-derived digital elevation model data of the TanDEM-X Mission can contribute to collect meaningful information on the actual state of the Arctic Environment. The study was conducted for Canadian sites of the Mackenzie Delta Region and Banks Island and in situ reference data were available for the assessment. The up-to-date analysis of the PolSAR data made the application of the Non-Local Means filtering and of the decomposition of co-polarized data necessary. The Non-Local Means filter showed a high capability to preserve the image values, to keep the edges and to reduce the speckle. This supported not only the suitability for the interpretation but also for the classification. The classification accuracies of Non-Local Means filtered data were in average +10% higher compared to unfiltered images. The correlation of the co- and quad-polarized decomposition features was high for classes with distinct surface or double bounce scattering and a usage of the co-polarized data is beneficial for regions of natural land coverage and for low vegetation formations with little volume scattering. The evaluation further revealed that the X- and C-Band were most sensitive to the generalized land cover classes. It was found that the X-Band data were sensitive to low vegetation formations with low shrub density, the C-Band data were sensitive to the shrub density and the shrub dominated tundra. In contrast, the L-Band data were less sensitive to the land cover. Among the different dual-polarized data the HH/VV-polarized data were identified to be most meaningful for the characterization and classification, followed by the HH/HV-polarized and the VV/VH-polarized data. The quad-polarized data showed highest sensitivity to the land cover but differences to the co-polarized data were small. The accuracy assessment showed that spectral information was required for accurate land cover classification. The best results were obtained when spectral and radar information was combined. The benefit of including radar data in the classification was up to +15% accuracy and most significant for the classes wetland and sparse vegetated tundra. The best classifications were realized with quad-polarized C-Band and multispectral data and with co-polarized X-Band and multispectral data. The overall accuracy was up to 80% for unsupervised and up to 90% for supervised classifications. The results indicated that the shortwave co-polarized data show promise for the classification of tundra land cover since the polarimetric information is sensitive to low vegetation and the wetlands. Furthermore, co-polarized data provide a higher spatial resolution than the quad-polarized data. The analysis of the intermediate digital elevation model data of the TanDEM-X showed a high potential for the characterization of the surface morphology. The basic and relative topographic features were shown to be of high relevance for the quantification of the surface morphology and an area-wide application is feasible. In addition, these data were of value for the classification and delineation of landforms. Such classifications will assist the delineation of geomorphological units and have potential to identify locations of actual and future morphologic activity. N2 - Die polaren Regionen der Erde zeigen eine hohe Sensitivität gegenüber dem aktuell stattfindenden klimatischen Wandel. Für den Raum der Arktis wurde eine signifikante Erwärmung der Landoberfläche beobachtet und zukünftige Prognosen zeigen einen positiven Trend der Temperaturentwicklung. Die Folgen für das System sind tiefgehend, zahlreich und zeigen sich bereits heute - beispielsweise in einer Zunahme der photosynthetischen Aktivität und einer Verstärkung der geomorphologischen Dynamik. Durch satellitengestützte Fernerkundungssysteme steht ein Instrumentarium bereit, welches in der Lage ist, solch großflächigen und aktuellen Änderungen der Landoberfläche nachzuzeichnen und zu quantifizieren. Insbesondere optische Systeme haben in den vergangen Jahren ihre hohe Anwendbarkeit für die kontinuierliche Beobachtung und Quantifizierung von Änderungen bewiesen, bzw. durch sie ist ein Erkennen der Änderungen erst ermöglicht worden. Der Nutzen von optischen Systemen für die Beobachtung der arktischen Landoberfläche wird dabei aber durch die häufige Beschattung durch Wolken und die Beleuchtungsgeometrie erschwert, bzw. unmöglich gemacht. Demgegenüber eröffnen bildgebende Radarsystem durch die aktive Sendung von elektromagnetischen Signalen die Möglichkeit kontinuierlich Daten über den Zustand der Oberfläche aufzuzeichnen, ohne von den atmosphärischen oder orbitalen Bedingungen abhängig zu sein. Das Ziel der vorliegenden Arbeit war es den Nutzen und Mehrwert von polarimetrischen Synthetic Aperture Radar (PolSAR) Daten der Satelliten TerraSAR-X, TanDEM-X, Radarsat-2 und ALOS PALSAR für die Charakterisierung und Klassifikation der arktischen Landoberfläche zu identifizieren. Darüber hinaus war es ein Ziel das vorläufige interferometrische digitale Höhenmodel der TanDEM-X Mission für die Charakterisierung der Landoberflächen-Morphologie zu verwenden. Die Arbeiten erfolgten hauptsächlich an ausgewählten Testgebieten im Bereich des kanadischen Mackenzie Deltas und im Norden von Banks Islanld. Für diese Regionen standen in situ erhobene Referenzdaten zur Landbedeckung zur Verfügung. Mit Blick auf den aktuellen Stand der Forschung wurden die Radardaten mit einem entwickelten Non-Local-Means Verfahren gefiltert. Die co-polarisierten Daten wurde zudem mit einer neu entwickelten zwei Komponenten Dekomposition verarbeitet. Das entwickelte Filterverfahren zeigt eine hohe Anwendbarkeit für alle Radardaten. Der Ansatz war in der Lage die Kanten und Grauwerte im Bild zu erhalten, bei einer gleichzeitigen Reduktion der Varianz und des Speckle-Effekts. Dies verbesserte nicht nur die Bildinterpretation, sondern auch die Bildklassifikation und eine Erhöhung der Klassifikationsgüte von ca. +10% konnte durch die Filterung erreicht werden. Die Merkmale der Dekomposition von co-polarisierten Daten zeigten eine hohe Korrelation zu den entsprechenden Merkmalen der Dekomposition von voll-polarisierten Daten. Die Korrelation war besonders hoch für Landbedeckungstypen, welche eine double oder single bounce Rückstreuung hervorrufen. Eine Anwendung von co-polarisierten Daten ist somit besonders sinnvoll und aussagekräftig für Landbedeckungstypen, welche nur einen geringen Teil an Volumenstreuung bedingen. Die vergleichende Auswertung der PolSAR Daten zeigte, dass sowohl X- als auch C-Band Daten besonders sensitiv für die untersuchten Landbedeckungsklassen waren. Die X-Band Daten zeigten die höchste Sensitivität für niedrige Tundrengesellschaften. Die C-Band Daten zeigten eine höhere Sensitivität für mittelhohe Tundrengesellschaften und Gebüsch (shrub). Die L-Band Daten wiesen im Vergleich dazu die geringste Sensitivität für die Oberflächenbedeckung auf. Ein Vergleich von verschiedenen dual-polarisierten Daten zeigte, dass die Kanalkombination HH/VV die beste Differenzierung der Landbedeckungsklassen lieferte. Weniger deutlich war die Differenzierung mit den Kombinationen HH/HV und VV/VH. Insgesamt am besten waren jedoch die voll-polarisierten Daten geeignet, auch wenn die Verbesserung im Vergleich zu den co-polarisierten Daten nur gering war. Die Analyse der Klassifikationsgenauigkeiten bestätigte dieses Bild, machte jedoch deutlich, dass zu einer genauen Landbedeckungsklassifikation die Einbeziehung von multispektraler Information notwendig ist. Eine Nutzung von voll-polarisierten C-Band und multispektralen Daten erbrachte so eine mittlere Güte von ca. 80% für unüberwachte und von ca. 90% für überwachte Klassifikationsverfahren. Ähnlich hohe Werte wurden für die Kombination von co-polarisierten X-Band und multispektralen Daten erreicht. Im Vergleich zu Klassifikation die nur auf Grundlage von multispektralen Daten durchgeführt wurden, erbrachte die Einbeziehung der polarisierten Radardaten eine zusätzliche durchschnittliche Klassifikationsgüte von ca. +15%. Der Zugewinn und die Möglichkeit zur Differenzierung war vor allem für die Bedeckungstypen der Feuchtgebiete (wetlands) und der niedrigen Tundrengesellschaften festzustellen. Die Analyse der digitalen Höhenmodelle zeigte ein hohes Potential der TanDEM-X Daten für die Charakterisierung der topographischen Gegebenheiten. Die aus den Daten abgeleiteten absoluten und relativen topographischen Merkmale waren für eine morphometrische Quantifizierung der Landoberflächen-Morphologie geeignet. Zudem konnten diese Merkmale auch für eine initiale Klassifikation der Landformen genutzt werden. Die Daten zeigten somit ein hohes Potential für die Unterstützung der geomorphologischen Kartierung und für die Identifizierung der aktuellen und zukünftigen Dynamik der Landoberfläche. KW - Mackenzie-River-Delta KW - Banks Islands KW - Radarfernerkundung KW - Topografie KW - Formmessung KW - Klassifikation KW - Relief KW - PolSAR KW - Synthetic Aperture Radar KW - Land Cover Classification KW - Digital Elevation Model KW - Arctic Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115719 ER - TY - THES A1 - Winkler, Marco T1 - On the Role of Triadic Substructures in Complex Networks T1 - Über die Bedeutung von Dreiecksstrukturen in komplexen Netzwerken N2 - In the course of the growth of the Internet and due to increasing availability of data, over the last two decades, the field of network science has established itself as an own area of research. With quantitative scientists from computer science, mathematics, and physics working on datasets from biology, economics, sociology, political sciences, and many others, network science serves as a paradigm for interdisciplinary research. One of the major goals in network science is to unravel the relationship between topological graph structure and a network’s function. As evidence suggests, systems from the same fields, i.e. with similar function, tend to exhibit similar structure. However, it is still vague whether a similar graph structure automatically implies likewise function. This dissertation aims at helping to bridge this gap, while particularly focusing on the role of triadic structures. After a general introduction to the main concepts of network science, existing work devoted to the relevance of triadic substructures is reviewed. A major challenge in modeling triadic structure is the fact that not all three-node subgraphs can be specified independently of each other, as pairs of nodes may participate in multiple of those triadic subgraphs. In order to overcome this obstacle, we suggest a novel class of generative network models based on so called Steiner triple systems. The latter are partitions of a graph’s vertices into pair-disjoint triples (Steiner triples). Thus, the configurations on Steiner triples can be specified independently of each other without overdetermining the network’s link structure. Subsequently, we investigate the most basic realization of this new class of models. We call it the triadic random graph model (TRGM). The TRGM is parametrized by a probability distribution over all possible triadic subgraph patterns. In order to generate a network instantiation of the model, for all Steiner triples in the system, a pattern is drawn from the distribution and adjusted randomly on the Steiner triple. We calculate the degree distribution of the TRGM analytically and find it to be similar to a Poissonian distribution. Furthermore, it is shown that TRGMs possess non-trivial triadic structure. We discover inevitable correlations in the abundance of certain triadic subgraph patterns which should be taken into account when attributing functional relevance to particular motifs – patterns which occur significantly more frequently than expected at random. Beyond, the strong impact of the probability distributions on the Steiner triples on the occurrence of triadic subgraphs over the whole network is demonstrated. This interdependence allows us to design ensembles of networks with predefined triadic substructure. Hence, TRGMs help to overcome the lack of generative models needed for assessing the relevance of triadic structure. We further investigate whether motifs occur homogeneously or heterogeneously distributed over a graph. Therefore, we study triadic subgraph structures in each node’s neighborhood individually. In order to quantitatively measure structure from an individual node’s perspective, we introduce an algorithm for node-specific pattern mining for both directed unsigned, and undirected signed networks. Analyzing real-world datasets, we find that there are networks in which motifs are distributed highly heterogeneously, bound to the proximity of only very few nodes. Moreover, we observe indication for the potential sensitivity of biological systems to a targeted removal of these critical vertices. In addition, we study whole graphs with respect to the homogeneity and homophily of their node-specific triadic structure. The former describes the similarity of subgraph distributions in the neighborhoods of individual vertices. The latter quantifies whether connected vertices are structurally more similar than non-connected ones. We discover these features to be characteristic for the networks’ origins. Moreover, clustering the vertices of graphs regarding their triadic structure, we investigate structural groups in the neural network of C. elegans, the international airport-connection network, and the global network of diplomatic sentiments between countries. For the latter we find evidence for the instability of triangles considered socially unbalanced according to sociological theories. Finally, we utilize our TRGM to explore ensembles of networks with similar triadic substructure in terms of the evolution of dynamical processes acting on their nodes. Focusing on oscillators, coupled along the graphs’ edges, we observe that certain triad motifs impose a clear signature on the systems’ dynamics, even when embedded in a larger network structure. N2 - Im Zuge des Wachstums des Internets und der Verfügbarkeit nie da gewesener Datenmengen, hat sich, während der letzten beiden Jahrzehnte, die Netzwerkwissenschaft zu einer eigenständigen Forschungsrichtung entwickelt. Mit Wissenschaftlern aus quantitativen Feldern wie der Informatik, Mathematik und Physik, die Datensätze aus Biologie, den Wirtschaftswissenschaften, Soziologie, Politikwissenschaft und vielen weiteren Anwendungsgebieten untersuchen, stellt die Netzwerkwissenschaft ein Paradebeispiel interdisziplinärer Forschung dar. Eines der grundlegenden Ziele der Netzwerkwissenschaft ist es, den Zusammenhang zwischen der topologischen Struktur und der Funktion von Netzwerken herauszufinden. Es gibt zahlreiche Hinweise, dass Netz-werke aus den gleichen Bereichen, d.h. Systeme mit ähnlicher Funktion, auch ähnliche Graphstrukturen aufweisen. Es ist allerdings nach wie vor unklar, ob eine ähnliche Graphstruktur generell zu gleicher Funktionsweise führt. Es ist das Ziel der vorliegenden Dissertation, zur Klärung dieser Frage beizutragen. Das Hauptaugenmerk wird hierbei auf der Rolle von Dreiecksstrukturen liegen. Nach einer allgemeinen Einführung der wichtigsten Grundlagen der Theorie komplexer Netzwerke, wird eine Übersicht über existierende Arbeiten zur Bedeutung von Dreiecksstrukturen gegeben. Eine der größten Herausforderungen bei der Modellierung triadischer Strukturen ist die Tatsache, dass nicht alle Dreiecksbeziehungen in einem Graphen unabhängig voneinander bestimmt werden können, da zwei Knoten an mehreren solcher Dreiecksbeziehungen beteiligt sein können. Um dieses Problem zu lösen, führen wir, basierend auf sogenannten Steiner-Tripel-Systemen, eine neue Klasse generativer Netzwerkmodelle ein. Steiner-Tripel-Systeme sind Zerlegungen der Knoten eines Graphen in paarfremde Tripel (Steiner-Tripel). Daher können die Konfigurationen auf Steiner-Tripeln unabhängig voneinander gewählt werden, ohne dass dies zu einer Überbestimmung der Netzwerkstruktur führen würde. Anschließend untersuchen wir die grundlegendste Realisierung dieser neuen Klasse von Netzwerkmodellen, die wir das triadische Zufallsgraph-Modell (engl. triadic random graph model, TRGM) nennen. TRGMs werden durch eine Wahrscheinlichkeitsverteilung über alle möglichen Dreiecksstrukturen parametrisiert. Um ein konkretes Netzwerk zu erzeugen wird für jedes Steiner-Tripel eine Dreiecksstruktur gemäß der Wahrscheinlichkeitsverteilung gezogen und zufällig auf dem Tripel orientiert. Wir berechnen die Knotengradverteilung des TRGM analytisch und finden heraus, dass diese einer Poissonverteilung ähnelt. Des Weiteren wird gezeigt, dass TRGMs nichttriviale Dreiecksstrukturen aufweisen. Außerdem finden wir unvermeidliche Korrelationen im Auftreten bestimmter Subgraphen, derer man sich bewusst sein sollte. Insbesondere wenn es darum geht, die Bedeutung sogenannter Motive (Strukturen, die signifikant häufiger als zufällig erwartet auftreten) zu beurteilen. Darüber hinaus wird der starke Einfluss der Wahrscheinlichkeitsverteilung auf den Steiner-Tripeln, auf die generelle Dreiecksstruktur der erzeugten Netzwerke gezeigt. Diese Abhängigkeit ermöglicht es, Netzwerkensembles mit vorgegebener Dreiecksstruktur zu konzipieren. Daher helfen TRGMs dabei, den bestehenden Mangel an generativen Netzwerkmodellen, zur Beurteilung der Bedeutung triadischer Strukturen in Graphen, zu beheben. Es wird ferner untersucht, wie homogen Motive räumlich über Graphstrukturen verteilt sind. Zu diesem Zweck untersuchen wir das Auftreten von Dreiecksstrukturen in der Umgebung jedes Knotens separat. Um die Struktur individueller Knoten quantitativ erfassen zu können, führen wir einen Algorithmus zur knotenspezifischen Musterauswertung (node-specific pattern mining) ein, der sowohl auf gerichtete, als auch auf Graphen mit positiven und negativen Kanten angewendet werden kann. Bei der Analyse realer Datensätze beobachten wir, dass Motive in einigen Netzen hochgradig heterogen verteilt, und auf die Umgebung einiger, weniger Knoten beschränkt sind. Darüber hinaus finden wir Hinweise auf die mögliche Fehleranfälligkeit biologischer Systeme auf ein gezieltes Entfernen ebendieser Knoten. Des Weiteren studieren wir ganze Graphen bezüglich der Homogenität und Homophilie ihrer knotenspezifischen Dreiecksmuster. Erstere beschreibt die Ähnlichkeit der lokalen Dreiecksstrukturen zwischen verschiedenen Knoten. Letztere gibt an, ob sich verbundene Knoten bezüglich ihrer Dreiecksstruktur ähnlicher sind, als nicht verbundene Knoten. Wir stellen fest, dass diese Eigenschaften charakteristisch für die Herkunft der jeweiligen Netzwerke sind. Darüber hinaus gruppieren wir die Knoten verschiedener Systeme bezüglich der Ähnlichkeit ihrer lokalen Dreiecksstrukturen. Hierzu untersuchen wir das neuronale Netz von C. elegans, das internationale Flugverbindungsnetzwerk, sowie das Netzwerk internationaler Beziehungen zwischen Staaten. In Letzterem finden wir Hinweise darauf, dass Dreieckskonfigurationen, die nach soziologischen Theorien als unbalanciert gelten, besonders instabil sind. Schließlich verwenden wir unser TRGM, um Netzwerkensembles mit ähnlicher Dreiecksstruktur bezüglich der Eigenschaften dynamischer Prozesse, die auf ihren Knoten ablaufen, zu untersuchen. Wir konzentrieren uns auf Oszillatoren, die entlang der Kanten der Graphen miteinander gekoppelt sind. Hierbei beobachten wir, dass bestimmte Dreiecksmotive charakteristische Merkmale im dynamischen Verhalten der Systeme hinterlassen. Dies ist auch der Fall, wenn die Motive in eine größere Netzwerkstruktur eingebettet sind. KW - Netzwerk KW - Komplexes System KW - Substruktur KW - Dreieck KW - Networks KW - Complex Systems KW - Statistics KW - Machine Learning KW - Biological Networks KW - Statistische Physik KW - Statistische Mechanik KW - Data Mining KW - Maschinelles Lernen KW - Graphentheorie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116022 SN - 978-3-7375-5654-5 PB - epubli GmbH CY - Berlin ER - TY - CHAP A1 - Ali, Qasim A1 - Montenegro, Sergio T1 - A Simple Approach to Quadrocopter Formation Flying Test Setup for Education and Development T2 - INTED2015 Proceedings N2 - A simple test setup has been developed at Institute of Aerospace Information Technology, University of Würzburg, Germany to realize basic functionalities for formation flight of quadrocopters. The test environment is planned to be utilized for developing and validating the algorithms for formation flying capability in real environment as well as for education purpose. An already existing test bed for single quadrocopter was extended with necessary inter-communication and distributed control mechanism to test the algorithms for formation flights in 2 degrees of freedom (roll / pitch). This study encompasses the domain of communication, control engineering and embedded systems programming. Bluetooth protocol has been used for inter-communication between two quadrocopters. A simple approach of PID control in combination with Kalman filter has been exploited. MATLAB Instrument Control Toolbox has been used for data display, plotting and analysis. Plots can be drawn in real-time and received information can also be stored in the form of files for later use and analysis. The test setup has been developed indigenously and at considerably low cost. Emphasis has been placed on simplicity to facilitate students learning process. Several lessons have been learnt during the course of development of this setup. Proposed setup is quite flexible that can be modified as per changing requirements. KW - Flugkörper KW - Design and Development KW - Formation Flight KW - Instrument Control Toolbox KW - Quadrocopter KW - Unmanned Aerial Vehicle KW - Quadrocopter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114495 SN - 978-84-606-5763-7 SN - 2340-1079 SP - 2776 EP - 2784 PB - International Academy of Technology, Education and Development (IATED) ER - TY - THES A1 - Hartmann, Matthias T1 - Optimization and Design of Network Architectures for Future Internet Routing T1 - Optimierung und Design von Netzwerkarchitekturen für zukünftiges Internet Routing N2 - At the center of the Internet’s protocol stack stands the Internet Protocol (IP) as a common denominator that enables all communication. To make routing efficient, resilient, and scalable, several aspects must be considered. Care must be taken that traffic is well balanced to make efficient use of the existing network resources, both in failure free operation and in failure scenarios. Finding the optimal routing in a network is an NP-complete problem. Therefore, routing optimization is usually performed using heuristics. This dissertation shows that a routing optimized with one objective function is often not good when looking at other objective functions. It can even be worse than unoptimized routing with respect to that objective function. After looking at failure-free routing and traffic distribution in different failure scenarios, the analysis is extended to include the loop-free alternate (LFA) IP fast reroute mechanism. Different application scenarios of LFAs are examined and a special focus is set on the fact that LFAs usually cannot protect all traffic in a network even against single link failures. Thus, the routing optimization for LFAs is targeted on both link utilization and failure coverage. Finally, the pre-congestion notification mechanism PCN for network admission control and overload protection is analyzed and optimized. Different design options for implementing the protocol are compared, before algorithms are developed for the calculation and optimization of protocol parameters and PCN-based routing. The second part of the thesis tackles a routing problem that can only be resolved on a global scale. The scalability of the Internet is at risk since a major and intensifying growth of the interdomain routing tables has been observed. Several protocols and architectures are analyzed that can be used to make interdomain routing more scalable. The most promising approach is the locator/identifier (Loc/ID) split architecture which separates routing from host identification. This way, changes in connectivity, mobility of end hosts, or traffic-engineering activities are hidden from the routing in the core of the Internet and the routing tables can be kept much smaller. All of the currently proposed Loc/ID split approaches have their downsides. In particular, the fact that most architectures use the ID for routing outside the Internet’s core is a poor design, which inhibits many of the possible features of a new routing architecture. To better understand the problems and to provide a solution for a scalable routing design that implements a true Loc/ID split, the new GLI-Split protocol is developed in this thesis, which provides separation of global and local routing and uses an ID that is independent from any routing decisions. Besides GLI-Split, several other new routing architectures implementing Loc/ID split have been proposed for the Internet. Most of them assume that a mapping system is queried for EID-to-RLOC mappings by an intermediate node at the border of an edge network. When the mapping system is queried by an intermediate node, packets are already on their way towards their destination, and therefore, the mapping system must be fast, scalable, secure, resilient, and should be able to relay packets without locators to nodes that can forward them to the correct destination. The dissertation develops a classification for all proposed mapping system architectures and shows their similarities and differences. Finally, the fast two-level mapping system FIRMS is developed. It includes security and resilience features as well as a relay service for initial packets of a flow when intermediate nodes encounter a cache miss for the EID-to-RLOC mapping. N2 - Daten durch das Internet werden heutzutage mit dem paketbasierten Internet Protokoll (IP) übertragen. Dezentralisierte Routingprotokolle innerhalb der einzelnen Netze sorgen für eine zielgerichtete Weiterleitung der einzelnen Pakete. Diese verteilten Protokolle können auch im Fehlerfall weiterarbeiten, benötigen aber mitunter sehr lange bis Daten wieder zuverlässig am Ziel ankommen. Um im Betrieb des Internets eine hohe Leistungsfähigkeit auch bei auftretenden Problemfällen zu gewährleisten, müssen die eingesetzten Protokolle optimal eingestellt werden. Zielfunktionen zur Optimierung paketbasierter Link-State Intradomain-Routingprotokolle: Ein wichtiger Faktor für die Performanz eines Netzes ist die Auswahl der administrativen Linkkosten, anhand derer die Weiterleitungsentscheidungen im Netz getroffen werden. Mit Hilfe von Modellen für Verkehrsaufkommen und für die darunterliegende Netzarchitektur kann mit geeigneten Optimierungsmethoden das Netz für verschiedene Szenarien bestmöglich eingestellt werden. Von besonderer Wichtigkeit ist hierbei die Auswahl der betrachteten Szenarien und Zielfunktionen für die Optimierung. Eine Routingkonfiguration die optimal für ein bestimmtes Ziel ist, kann beliebig schlecht für ein anderes Ziel sein. Zum Beispiel kann eine Konfiguration, die eine besonders hohe Fehlerabdeckung erreicht, zu einer sehr schlechten Verkehrsverteilung führen. Im Rahmen der Dissertation werden heuristische Optimierungen des Routings für verschiedene Protokolle und Anwendungsszenarien durchgeführt. Darüber hinaus wird eine Pareto-Optimierung implementiert, die gleichzeitig mehrere Ziele optimieren kann. Die Analysen werden zuerst für normales Routing im fehlerfreien Fall und für Fehlerszenarien durchgeführt. Daraufhin werden verschiedenste Anwendungsfälle des IP Fast-Reroute Mechanismus Loop-Free Alternates (LFA) betrachtet. Hier wird insbesondere auf die Problematik eingegangen, dass LFAs in Abhängigkeit vom eingestellten Routing in bestimmten Fehlerfällen nicht angewendet werden können. Beim Optimieren des Routings muss hier zusätzlich zur Lastverteilung auch noch die Maximierung der Fehlerabdeckung berücksichtigt werden. Schließlich folgt eine Untersuchung und Optimierung des Pre-Congestion Notification (PCN) Verfahren zur Netzzugangskontrolle und Überlaststeuerung. Hier werden verschiedene Architekturvarianten des Protokolls miteinander verglichen und Algorithmen zur Berechnung und Optimierung wichtiger Parameter des Protokolls entwickelt. Das Wachstum der Routingtabellen im Kern des Internets droht zu einem Skalierbarkeitsproblem zu werden. Ein Grund für diese Problematik ist die duale Funktion der IP-Adresse. Sie wird einerseits zur Identifikation eines Geräts benutzt und andererseits zur Weiterleitung der Daten zu diesem Gerät. Neue Mechanismen und Protokolle die eine Trennung zwischen den beiden Funktionalitäten der IP-Adresse ermöglichen sind potentielle Kandidaten für eine bessere Skalierbarkeit des Internetroutings und damit für die Erhaltung der Funktionalität des Internets. Design eines neuen Namens- und Routingprotokolls für skalierbares Interdomain-Routing: In der Dissertation werden grundlegende Eigenschaften die zu diesem Problem führen erörtert. Daraufhin werden vorhandene Ansätze zur Verbesserung der Skalierbarkeit des Internetroutings analysiert, und es werden Gemeinsamkeiten wie auch Schwachstellen identifiziert. Auf dieser Basis wird dann ein Protokoll entwickelt, das eine strikte Trennung zwischen Identifikationsadressen (IDs) und routebaren Locator-Adressen einhält. Das GLI-Split genannte Protokoll geht dabei über den einfachen Split von vorhandenen Architekturvorschlägen hinaus und führt eine weitere Adresse ein die nur für das lokale Routing innerhalb eines Endkunden-Netzes benutzt wird. Hierdurch wird die ID eines Endgeräts vollständig unabhängig vom Routing. Durch das GLI-Split Protokoll kann das globale Routing wieder skalierbar gemacht werden. Zusätzlich bietet es viele Vorteile für Netze die das Protokoll einführen, was als Anreiz nötig ist um den Einsatz eines neuen Protokolls zu motivieren. Solch ein Identifier/Locator Split Protokoll benötigt ein Mappingsystem um die Identifier der Endgeräte in routebare Locator-Adressen zu übersetzen. Im letzten Teil der Dissertation wird eine mehrstufige Mapping-Architektur namens FIRMS entwickelt. Über ein hierarchisches Verteilungssystem, das die Adressvergabestruktur der fünf Regionalen Internet Registrare (RIRs) und der darunterliegenden Lokalen Internet Registrare (LIRs) abbildet, werden die erforderlichen Zuordnungstabellen so verteilt, dass jederzeit schnell auf die benötigten Informationen zugegriffen werden kann. Hierbei wird auch besonders auf Sicherheitsaspekte geachtet. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/15 KW - Netzwerk KW - Routing KW - Optimierung KW - Netzwerkmanagement KW - Optimization KW - Future Internet Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114165 SN - 1432-8801 ER - TY - THES A1 - Freiberg, Martina T1 - UI-, User-, & Usability-Oriented Engineering of Participative Knowledge-Based Systems T1 - UI-, Benutzer-, & Usability-orientierte Entwicklung partizipativer Wissensbasierter Systeme N2 - Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the ’perfect intelligent software’ continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions. In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE: (1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for ’yet another’ self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model. For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE. Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS. N2 - Das Interesse an wissensbasierten Systemen (WBS) in verschiedensten Fachdisziplinen und Anwendungskontexten wächst nach wie vor stetig. Das frühere Ziel — intelligente Software als Expertenersatz — verschiebt sich dabei allerdings kontinuierlich in Richtung partizipativer, nutzerzentrierter Anwendungen. Solche Systeme erlauben dem Benutzer, das vorhandene persönliche Hintergrundwissen in den Problemlösungsprozess mit einzubringen um die Effizienz des Systems zu steigern und die User Experience zu verbessern. Konkret definieren wir für partizipative WBS die folgenden, nichtfunktionalen Anforderungen: Transparenz (umfassende Vermittlung des Systemstatus), Konfigurierbarkeit (Anpassbarkeit an verschiedene Benutzer und Grad der Benutzerkontrolle und Explorationsmöglichkeit), Qualität sowohl der Wissensbasis als auch der Benutzeroberfläche und Fortentwickelbarkeit (Fähigkeit des WBS analog zu den Kenntnissen seiner Nutzer zu reifen). Viele dieser Anforderungen hängen stark von den jeweiligen Nutzern ab. Im Umkehrschluss erfordert dies eine nutzerzentriertere Entwicklung solcher Systeme. Die häufig sehr fachspezifischen Zieldomänen haben meist entsprechend komplexe Wissensbasen zur Folge. Dies verlangt erst Recht nach einem wohlüberlegten, durchdachten UI- und Inkteraktionsdesign. Dem zum Trotz fokussieren aktuelle WBS Entwicklungsansätze jedoch nach wie vor auf der Wissensformalisierung. Mit der Folge, dass oft keine optimalen, schlecht wiederverwendbare und nur teilweise (oder gar nicht) evaluierte WBS UI/Interaktionslösungen entstehen. Die vorliegende Dissertation schlägt einen allumfassenderen WBS Entwicklungsansatz vor. Unter Berücksichtigung der starken, wechselseitigen Beeinflussung von Wissensbasis und UI ist dieser geprägt durch eine starke Verzahnung von Wissensbasis- und UI-Entwicklung. Der Ansatz stützt sich auf drei Kernkomponenten für allumfassende Entwicklung wissensbasierter Systeme: (1) Extensible Prototyping, eine adaptierte Form des evolutionären Prototyping. Extensible Prototyping basiert auf hochentwickelten UI Prototypen und definiert zwei Erweiterungsschritte um jederzeit WBS-Kernprototypen (Wissensbasis und Kern-UI) beziehungsweise voll funktionale wissensbasierte Anwendungen (WBS Kernprototyp und Rahmenfunktionalität) zu erstellen. (2) WBS UI Patterns. Diese Patterns, oder Muster, definieren wiederverwendbare Lösungen für die Kern-UI und -Inkteraktion. In dieser Arbeit stellen wir eine Sammlung grundlegender WBS UI Patterns vor. (3) Passende Usability Techniken die sich speziell für die Evaluation von WBS Software eignen. Insgesamt streben wir keine weitere, in sich geschlossene WBS Entwicklungsmethodologie an. Vielmehr motivieren wir, existierende, Wissensformalisierungs-lastige Ansätze um die vorgeschlagenen Kernkomponenten zu erweitern. Wir demonstrieren das am agilen Prozessmodell für wissensbasierte Systeme. Für die praktische Umsetzung des vorgestellten Ansatzes stellen wir außerdem das spezialisierte WBS Prototyping- und Softwareentwicklungswerkzeug ProKEt vor. ProKEt unterstützt eine Auswahl der interessantesten WBS UI Patterns sowie zugehöriger Konfigurationsoptionen. Deren weitere Anpassung beziehungsweise Erweiterung ist auf verschiedenen Expertise-Leveln möglich. Um ebenso die Anwendung von Usability Techniken zu unterstützen, bietet ProKEt weiterhin Funktionalität für die quantitative und qualitative Datensammlung. Auch baut ProKEt bewusst auf die strikt verzahnte Entwicklung von UI- und Wissensbasis. Für die einfache und nahtlose Integration von Wissensformalisierung in den Gesamtprozess unterstützt ProKEt zwei externe Wissensformalisierungs-Werkzeuge: KnowOF, eine Wissensformalisierungsumgebung welche standartisierte Office Dokumente nutzt. Und KnowWE, ein semantisches Wiki für die kollaborative Wissensformalisierung im Web. Damit ist ProKEt ein mächtiges Werkzeug für umfassende, nutzerzentrierte WBS Entwicklung. Mithilfe des Entwicklungsansatzes und des Werkzeugs ProKEt haben wir weiterhin einen neuartigen WBS Typ entwickelt: Wissensbasierte Klärungssysteme, im Wesentlichen ein Mashup aus Beratungs-, Erklärungs- und Rechtfertigungskomponente. Diese Systeme stellen eine angepasste Realisierung von partizipativen WBS für höchst fachliche Kontexte dar und verlangten entsprechend nach einem sehr speziellen Design. In der vorliegenden Arbeit stellen wir daher neben allgemeinen WBS UI Patterns auch einige spezialisierte Varianten für wissensbasierte Klärungssysteme vor. KW - Wissensbasiertes System KW - Knowledge-based Systems Engineering KW - Expert System KW - Usability KW - UI and Interaction Design KW - User Participation KW - Expertensystem Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-106072 SN - 978-3-95826-012-2 (print) SN - 978-3-95826-013-9 (online) PB - Würzburg University Press ER - TY - JOUR A1 - Sîrbu, Alina A1 - Becker, Martin A1 - Caminiti, Saverio A1 - De Baets, Bernard A1 - Elen, Bart A1 - Francis, Louise A1 - Gravino, Pietro A1 - Hotho, Andreas A1 - Ingarra, Stefano A1 - Loreto, Vittorio A1 - Molino, Andrea A1 - Mueller, Juergen A1 - Peters, Jan A1 - Ricchiuti, Ferdinando A1 - Saracino, Fabio A1 - Servedio, Vito D.P. A1 - Stumme, Gerd A1 - Theunis, Jan A1 - Tria, Francesca A1 - Van den Bossche, Joris T1 - Participatory Patterns in an International Air Quality Monitoring Initiative JF - PLoS ONE N2 - The issue of sustainability is at the top of the political and societal agenda, being considered of extreme importance and urgency. Human individual action impacts the environment both locally (e.g., local air/water quality, noise disturbance) and globally (e.g., climate change, resource use). Urban environments represent a crucial example, with an increasing realization that the most effective way of producing a change is involving the citizens themselves in monitoring campaigns (a citizen science bottom-up approach). This is possible by developing novel technologies and IT infrastructures enabling large citizen participation. Here, in the wider framework of one of the first such projects, we show results from an international competition where citizens were involved in mobile air pollution monitoring using low cost sensing devices, combined with a web-based game to monitor perceived levels of pollution. Measures of shift in perceptions over the course of the campaign are provided, together with insights into participatory patterns emerging from this study. Interesting effects related to inertia and to direct involvement in measurement activities rather than indirect information exposure are also highlighted, indicating that direct involvement can enhance learning and environmental awareness. In the future, this could result in better adoption of policies towards decreasing pollution. KW - transport microenvironments KW - exposure KW - pollution KW - carbon Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151379 VL - 10 IS - 8 ER - TY - JOUR A1 - Appel, Mirjam A1 - Scholz, Claus-Jürgen A1 - Müller, Tobias A1 - Dittrich, Marcus A1 - König, Christian A1 - Bockstaller, Marie A1 - Oguz, Tuba A1 - Khalili, Afshin A1 - Antwi-Adjei, Emmanuel A1 - Schauer, Tamas A1 - Margulies, Carla A1 - Tanimoto, Hiromu A1 - Yarali, Ayse T1 - Genome-Wide Association Analyses Point to Candidate Genes for Electric Shock Avoidance in Drosophila melanogaster JF - PLoS ONE N2 - Electric shock is a common stimulus for nociception-research and the most widely used reinforcement in aversive associative learning experiments. Yet, nothing is known about the mechanisms it recruits at the periphery. To help fill this gap, we undertook a genome-wide association analysis using 38 inbred Drosophila melanogaster strains, which avoided shock to varying extents. We identified 514 genes whose expression levels and/or sequences covaried with shock avoidance scores. We independently scrutinized 14 of these genes using mutants, validating the effect of 7 of them on shock avoidance. This emphasizes the value of our candidate gene list as a guide for follow-up research. In addition, by integrating our association results with external protein-protein interaction data we obtained a shock avoidance- associated network of 38 genes. Both this network and the original candidate list contained a substantial number of genes that affect mechanosensory bristles, which are hairlike organs distributed across the fly's body. These results may point to a potential role for mechanosensory bristles in shock sensation. Thus, we not only provide a first list of candidate genes for shock avoidance, but also point to an interesting new hypothesis on nociceptive mechanisms. KW - functional analysis KW - disruption project KW - natural variation KW - complex traits KW - networks KW - behavior KW - flies KW - temperature KW - genetics KW - painful Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-152006 VL - 10 IS - 5 ER -