TY - RPRT A1 - Martino, Luigi A1 - Deutschmann, Jörg A1 - Hielscher, Kai-Steffen A1 - German, Reinhard T1 - Towards a 5G Satellite Communication Framework for V2X T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In recent years, satellite communication has been expanding its field of application in the world of computer networks. This paper aims to provide an overview of how a typical scenario involving 5G Non-Terrestrial Networks (NTNs) for vehicle to everything (V2X) applications is characterized. In particular, a first implementation of a system that integrates them together will be described. Such a framework will later be used to evaluate the performance of applications such as Vehicle Monitoring (VM), Remote Driving (RD), Voice Over IP (VoIP), and others. Different configuration scenarios such as Low Earth Orbit and Geostationary Orbit will be considered. KW - 5G KW - non-terrestrial networks KW - satellite communication Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322148 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Towards a Knowledge-Based Learning System for The Quranic Text N2 - In this research, an attempt to create a knowledge-based learning system for the Quranic text has been performed. The knowledge base is made up of the Quranic text along with detailed information about each chapter and verse, and some rules. The system offers the possibility to study the Quran through web-based interfaces, implementing novel visualization techniques for browsing, querying, consulting, and testing the acquired knowledge. Additionally the system possesses knowledge acquisition facilities for maintaining the knowledge base. KW - Wissensbanksystem KW - Wissensmanagement KW - Text Mining KW - Visualisierung KW - Koran KW - Knowledge-based System KW - Knowledge Management System KW - Text Mining KW - Visualization KW - Quran Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70003 ER - TY - CHAP A1 - Abendschein, Robin A1 - Desai, Shital A1 - Astell, Arlene J. T1 - Towards Accessibility Guidelines for the Metaverse : A Synthesis of Recommendations for People Living With Dementia T2 - Conference on Human Factors in Computing Systems (CHI’23) : Workshop "Towards an Inclusive and Accessible Metaverse" N2 - Given the growing interest of corporate stakeholders in Metaverse applications, there is a need to understand accessibility of these technologies for marginalized populations such as people living with dementia to ensure inclusive design of Metaverse applications. We assessed the accessibility of extended reality technology for people living with mild cognitive impairment and dementia to develop accessibility guidelines for these technologies. We used four strategies to synthesize evidence for barriers and facilitators of accessibility: (1) Findings from a non-systematic literature review, (2) guidelines from well-researched technology, (3) exploration of selected mixed reality technologies, and (4) observations from four sessions and video data of people living with dementia using mixed reality technologies. We utilized template analysis to develop codes and themes towards accessibility guidelines. Future work can validate our preliminary findings by applying them on video recordings or testing them in experiments. KW - CHI Conference KW - Accessibility KW - Metaverse KW - extended reality KW - dementia KW - cognitive impairment KW - Human-centered computing / Access KW - Human-centered computing / Human computer interaction (HCI) / Interaction paradigms / Mixed / augmented reality KW - Human-centered computing / Human computer interaction (HCI) / Interaction paradigms / Virtual reality KW - Human-centered computing / Human computer interaction (HCI) / Interactiondevices KW - Human-centered computing / Human computerinteraction (HCI) / Interaction techniques Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-320199 UR - https://sites.google.com/view/accessiblemetaverse ER - TY - JOUR A1 - Loh, Frank A1 - Mehling, Noah A1 - Hoßfeld, Tobias T1 - Towards LoRaWAN without data loss: studying the performance of different channel access approaches JF - Sensors N2 - The Long Range Wide Area Network (LoRaWAN) is one of the fastest growing Internet of Things (IoT) access protocols. It operates in the license free 868 MHz band and gives everyone the possibility to create their own small sensor networks. The drawback of this technology is often unscheduled or random channel access, which leads to message collisions and potential data loss. For that reason, recent literature studies alternative approaches for LoRaWAN channel access. In this work, state-of-the-art random channel access is compared with alternative approaches from the literature by means of collision probability. Furthermore, a time scheduled channel access methodology is presented to completely avoid collisions in LoRaWAN. For this approach, an exhaustive simulation study was conducted and the performance was evaluated with random access cross-traffic. In a general theoretical analysis the limits of the time scheduled approach are discussed to comply with duty cycle regulations in LoRaWAN. KW - LoRaWAN KW - IoT KW - channel management KW - scheduling KW - collision Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-302418 SN - 1424-8220 VL - 22 IS - 2 ER - TY - JOUR A1 - Zeeshan, Ahmed T1 - Towards Performance Measurement and Metrics Based Analysis of PLA Applications N2 - This article is about a measurement analysis based approach to help software practitioners in managing the additional level complexities and variabilities in software product line applications. The architecture of the proposed approach i.e. ZAC is designed and implemented to perform preprocessesed source code analysis, calculate traditional and product line metrics and visualize results in two and three dimensional diagrams. Experiments using real time data sets are performed which concluded with the results that the ZAC can be very helpful for the software practitioners in understanding the overall structure and complexity of product line applications. Moreover the obtained results prove strong positive correlation between calculated traditional and product line measures. KW - Programmierbare logische Anordnung KW - Analysis KW - Measurement KW - Software product lines KW - Variability Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-68188 ER - TY - JOUR A1 - Kaiser, Dennis A1 - Lesch, Veronika A1 - Rothe, Julian A1 - Strohmeier, Michael A1 - Spieß, Florian A1 - Krupitzer, Christian A1 - Montenegro, Sergio A1 - Kounev, Samuel T1 - Towards Self-Aware Multirotor Formations JF - Computers N2 - In the present day, unmanned aerial vehicles become seemingly more popular every year, but, without regulation of the increasing number of these vehicles, the air space could become chaotic and uncontrollable. In this work, a framework is proposed to combine self-aware computing with multirotor formations to address this problem. The self-awareness is envisioned to improve the dynamic behavior of multirotors. The formation scheme that is implemented is called platooning, which arranges vehicles in a string behind the lead vehicle and is proposed to bring order into chaotic air space. Since multirotors define a general category of unmanned aerial vehicles, the focus of this thesis are quadcopters, platforms with four rotors. A modification for the LRA-M self-awareness loop is proposed and named Platooning Awareness. The implemented framework is able to offer two flight modes that enable waypoint following and the self-awareness module to find a path through scenarios, where obstacles are present on the way, onto a goal position. The evaluation of this work shows that the proposed framework is able to use self-awareness to learn about its environment, avoid obstacles, and can successfully move a platoon of drones through multiple scenarios. KW - self-aware computing KW - unmanned aerial vehicles KW - multirotors KW - quadcopters KW - intelligent transportation systems Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200572 SN - 2073-431X VL - 9 IS - 1 ER - TY - RPRT A1 - Höweler, Malte A1 - Xiang, Zuo A1 - Höpfner, Franz A1 - Nguyen, Giang T. A1 - Fitzek, Frank H. P. T1 - Towards Stateless Core Networks: Measuring State Access Patterns T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Future mobile communication networks, such as 5G and beyond, can benefit from Virtualized Network Functions (VNFs) when deployed on cloud infrastructures to achieve elasticity and scalability. However, new challenges arise as to managing states of Network Functions (NFs). Especially control plane VNFs, which are mainly found in cellular core networks like the 5G Core (5GC), received little attention since the shift towards virtualizing NFs. Most existing solutions for these core networks are often complex, intrusive, and are seldom compliant with the standard. With the emergence of 5G campus networks, UEs will be mainly machine-type devices. These devices communicate more deterministically, bringing new opportunities for elaborated state management. This work presents an emulation environment to perform rigorous measurements on state access patterns. The emulation comes with a fully parameterized Markov model for the UE to examine a wide variety of different devices. These measurements can then be used as a solid base for designing an efficient, simple, and standard conform state management solution that brings us further towards stateless core networks. KW - Datennetz KW - 5GC KW - VNF KW - SBA KW - measurements KW - MTC Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280770 ER - TY - JOUR A1 - Kraft, Robin A1 - Reichert, Manfred A1 - Pryss, Rüdiger T1 - Towards the interpretation of sound measurements from smartphones collected with mobile crowdsensing in the healthcare domain: an experiment with Android devices JF - Sensors N2 - The ubiquity of mobile devices fosters the combined use of ecological momentary assessments (EMA) and mobile crowdsensing (MCS) in the field of healthcare. This combination not only allows researchers to collect ecologically valid data, but also to use smartphone sensors to capture the context in which these data are collected. The TrackYourTinnitus (TYT) platform uses EMA to track users' individual subjective tinnitus perception and MCS to capture an objective environmental sound level while the EMA questionnaire is filled in. However, the sound level data cannot be used directly among the different smartphones used by TYT users, since uncalibrated raw values are stored. This work describes an approach towards making these values comparable. In the described setting, the evaluation of sensor measurements from different smartphone users becomes increasingly prevalent. Therefore, the shown approach can be also considered as a more general solution as it not only shows how it helped to interpret TYT sound level data, but may also stimulate other researchers, especially those who need to interpret sensor data in a similar setting. Altogether, the approach will show that measuring sound levels with mobile devices is possible in healthcare scenarios, but there are many challenges to ensuring that the measured values are interpretable. KW - mHealth KW - crowdsensing KW - tinnitus KW - noise measurement KW - environmental sound Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252246 SN - 1424-8220 VL - 22 IS - 1 ER - TY - RPRT A1 - Vomhoff, Viktoria A1 - Geissler, Stefan A1 - Gebert, Steffen A1 - Hossfeld, Tobias T1 - Towards Understanding the Global IPX Network from an MVNO Perspective T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In this paper, we work to understand the global IPX network from the perspective of an MVNO. In order to do this, we provide a brief description of the global architecture of mobile carriers. We provide initial results with respect to mapping the vast and complex interconnection network enabling global roaming from the point of view of a single MVNO. Finally, we provide preliminary results regarding the quality of service observed under global roaming conditions. KW - global IPX network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322121 ER - TY - RPRT A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Towards Understanding the Signaling Traffic in 5G Core Networks T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The Fifth Generation (5G) communication technology, its infrastructure and architecture, though already deployed in campus and small scale networks, is still undergoing continuous changes and research. Especially, in the light of future large scale deployments and industrial use cases, a detailed analysis of the performance and utilization with regard to latency and service times constraints is crucial. To this end, a fine granular investigation of the Network Function (NF) based core system and the duration for all the tasks performed by these services is necessary. This work presents the first steps towards analyzing the signaling traffic in 5G core networks, and introduces a tool to automatically extract sequence diagrams and service times for NF tasks from traffic traces. KW - signaling traffic KW - 5G core network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322106 ER - TY - THES A1 - Saska, Martin T1 - Trajectory planning and optimal control for formations of autonomous robots T1 - Die Bahnplanung und die optimale Steuerung für Formationen der autonomen Roboter N2 - In this thesis, we present novel approaches for formation driving of nonholonomic robots and optimal trajectory planning to reach a target region. The methods consider a static known map of the environment as well as unknown and dynamic obstacles detected by sensors of the formation. The algorithms are based on leader following techniques, where the formation of car-like robots is maintained in a shape determined by curvilinear coordinates. Beyond this, the general methods of formation driving are specialized and extended for an application of airport snow shoveling. Detailed descriptions of the algorithms complemented by relevant stability and convergence studies will be provided in the following chapters. Furthermore, discussions of the applicability will be verified by various simulations in existing robotic environments and also by a hardware experiment. N2 - In dieser Arbeit präsentieren wir neuartige Algorithmen für die Steuerung der Formationen der nichtholonomen Roboter und ihre optimale Bahnplanung. Die Algorithmen beruhen auf "leader-follower" Techniken. Die Formationen der "car-like" Roboter sind in einer bestimmten Form von "curvilinear" Koordinaten gehalten. Die Steuerungmethoden der Formationen sind spezialisiert und erweitert um ihre Anwendung auf das Flughafenschneeschaufeln. In dieser Arbeit werden die detaillierten Beschreibungen der Algorithmen durch entsprechende Stabilität- und Konvergenz-Studien gestellt. Ihre Anwendbarkeit wird durch verschiedene Simulationen und eine Hardware-Experiment überprüft. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 3 KW - Autonomer Roboter KW - Mobiler Roboter KW - Optimale Kontrolle KW - Formation KW - Steuerung KW - formation driving KW - mobile robots KW - snow shoveling KW - receding horizon control KW - model predictive control KW - trajectory planning Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53175 SN - 978-3-923959-56-3 ER - TY - THES A1 - Freiberg, Martina T1 - UI-, User-, & Usability-Oriented Engineering of Participative Knowledge-Based Systems T1 - UI-, Benutzer-, & Usability-orientierte Entwicklung partizipativer Wissensbasierter Systeme N2 - Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the ’perfect intelligent software’ continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions. In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE: (1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for ’yet another’ self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model. For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE. Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS. N2 - Das Interesse an wissensbasierten Systemen (WBS) in verschiedensten Fachdisziplinen und Anwendungskontexten wächst nach wie vor stetig. Das frühere Ziel — intelligente Software als Expertenersatz — verschiebt sich dabei allerdings kontinuierlich in Richtung partizipativer, nutzerzentrierter Anwendungen. Solche Systeme erlauben dem Benutzer, das vorhandene persönliche Hintergrundwissen in den Problemlösungsprozess mit einzubringen um die Effizienz des Systems zu steigern und die User Experience zu verbessern. Konkret definieren wir für partizipative WBS die folgenden, nichtfunktionalen Anforderungen: Transparenz (umfassende Vermittlung des Systemstatus), Konfigurierbarkeit (Anpassbarkeit an verschiedene Benutzer und Grad der Benutzerkontrolle und Explorationsmöglichkeit), Qualität sowohl der Wissensbasis als auch der Benutzeroberfläche und Fortentwickelbarkeit (Fähigkeit des WBS analog zu den Kenntnissen seiner Nutzer zu reifen). Viele dieser Anforderungen hängen stark von den jeweiligen Nutzern ab. Im Umkehrschluss erfordert dies eine nutzerzentriertere Entwicklung solcher Systeme. Die häufig sehr fachspezifischen Zieldomänen haben meist entsprechend komplexe Wissensbasen zur Folge. Dies verlangt erst Recht nach einem wohlüberlegten, durchdachten UI- und Inkteraktionsdesign. Dem zum Trotz fokussieren aktuelle WBS Entwicklungsansätze jedoch nach wie vor auf der Wissensformalisierung. Mit der Folge, dass oft keine optimalen, schlecht wiederverwendbare und nur teilweise (oder gar nicht) evaluierte WBS UI/Interaktionslösungen entstehen. Die vorliegende Dissertation schlägt einen allumfassenderen WBS Entwicklungsansatz vor. Unter Berücksichtigung der starken, wechselseitigen Beeinflussung von Wissensbasis und UI ist dieser geprägt durch eine starke Verzahnung von Wissensbasis- und UI-Entwicklung. Der Ansatz stützt sich auf drei Kernkomponenten für allumfassende Entwicklung wissensbasierter Systeme: (1) Extensible Prototyping, eine adaptierte Form des evolutionären Prototyping. Extensible Prototyping basiert auf hochentwickelten UI Prototypen und definiert zwei Erweiterungsschritte um jederzeit WBS-Kernprototypen (Wissensbasis und Kern-UI) beziehungsweise voll funktionale wissensbasierte Anwendungen (WBS Kernprototyp und Rahmenfunktionalität) zu erstellen. (2) WBS UI Patterns. Diese Patterns, oder Muster, definieren wiederverwendbare Lösungen für die Kern-UI und -Inkteraktion. In dieser Arbeit stellen wir eine Sammlung grundlegender WBS UI Patterns vor. (3) Passende Usability Techniken die sich speziell für die Evaluation von WBS Software eignen. Insgesamt streben wir keine weitere, in sich geschlossene WBS Entwicklungsmethodologie an. Vielmehr motivieren wir, existierende, Wissensformalisierungs-lastige Ansätze um die vorgeschlagenen Kernkomponenten zu erweitern. Wir demonstrieren das am agilen Prozessmodell für wissensbasierte Systeme. Für die praktische Umsetzung des vorgestellten Ansatzes stellen wir außerdem das spezialisierte WBS Prototyping- und Softwareentwicklungswerkzeug ProKEt vor. ProKEt unterstützt eine Auswahl der interessantesten WBS UI Patterns sowie zugehöriger Konfigurationsoptionen. Deren weitere Anpassung beziehungsweise Erweiterung ist auf verschiedenen Expertise-Leveln möglich. Um ebenso die Anwendung von Usability Techniken zu unterstützen, bietet ProKEt weiterhin Funktionalität für die quantitative und qualitative Datensammlung. Auch baut ProKEt bewusst auf die strikt verzahnte Entwicklung von UI- und Wissensbasis. Für die einfache und nahtlose Integration von Wissensformalisierung in den Gesamtprozess unterstützt ProKEt zwei externe Wissensformalisierungs-Werkzeuge: KnowOF, eine Wissensformalisierungsumgebung welche standartisierte Office Dokumente nutzt. Und KnowWE, ein semantisches Wiki für die kollaborative Wissensformalisierung im Web. Damit ist ProKEt ein mächtiges Werkzeug für umfassende, nutzerzentrierte WBS Entwicklung. Mithilfe des Entwicklungsansatzes und des Werkzeugs ProKEt haben wir weiterhin einen neuartigen WBS Typ entwickelt: Wissensbasierte Klärungssysteme, im Wesentlichen ein Mashup aus Beratungs-, Erklärungs- und Rechtfertigungskomponente. Diese Systeme stellen eine angepasste Realisierung von partizipativen WBS für höchst fachliche Kontexte dar und verlangten entsprechend nach einem sehr speziellen Design. In der vorliegenden Arbeit stellen wir daher neben allgemeinen WBS UI Patterns auch einige spezialisierte Varianten für wissensbasierte Klärungssysteme vor. KW - Wissensbasiertes System KW - Knowledge-based Systems Engineering KW - Expert System KW - Usability KW - UI and Interaction Design KW - User Participation KW - Expertensystem Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-106072 SN - 978-3-95826-012-2 (print) SN - 978-3-95826-013-9 (online) PB - Würzburg University Press ER - TY - RPRT A1 - Grigorjew, Alexej A1 - Schumann, Lukas Kilian A1 - Diederich, Philip A1 - Hoßfeld, Tobias A1 - Kellerer, Wolfgang T1 - Understanding the Performance of Different Packet Reception and Timestamping Methods in Linux T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This document briefly presents some renowned packet reception techniques for network packets in Linux systems. Further, it compares their performance when measuring packet timestamps with respect to throughput and accuracy. Both software and hardware timestamps are compared, and various parameters are examined, including frame size, link speed, network interface card, and CPU load. The results indicate that hardware timestamping offers significantly better accuracy with no downsides, and that packet reception techniques that avoid system calls offer superior measurement throughput. KW - packet reception method KW - timestamping method KW - Linux Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322064 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Understanding the Vex Rendering Engine N2 - The Visual Editor for XML (Vex)[1] used by TextGrid [2]and other applications has got rendering and layout engines. The layout engine is well documented but the rendering engine is not. This lack of documenting the rendering engine has made refactoring and extending the editor hard and tedious. For instance many CSS2.1 and upcoming CSS3 properties have not been implemented. Software developers in different projects such as TextGrid using Vex would like to update its CSS rendering engine in order to provide advanced user interfaces as well as support different document types. In order to minimize the effort of extending Vex functionality, I found it beneficial to write a basic documentation about Vex software architecture in general and its CSS rendering engine in particular. The documentation is mainly based on the idea of architectural layered diagrams. In fact layered diagrams can help developers understand software’s source code faster and easier in order to alter it, and fix errors. This paper is written for the purpose of providing direct support for exploration in the comprehension process of Vex source code. It discusses Vex software architecture. The organization of packages that make up the software, the architecture of its CSS rendering engine, an algorithm explaining the working principle of its rendering engine are described. KW - Cascading Style Sheets KW - Softwarearchitektur KW - CSS KW - Processing model KW - Software architecture KW - Software design Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51333 ER - TY - THES A1 - Bleier, Michael T1 - Underwater Laser Scanning - Refractive Calibration, Self-calibration and Mapping for 3D Reconstruction T1 - Laserscanning unter Wasser - Refraktive Kalibrierung, Selbstkalibrierung und Kartierung zur 3D Rekonstruktion N2 - There is great interest in affordable, precise and reliable metrology underwater: Archaeologists want to document artifacts in situ with high detail. In marine research, biologists require the tools to monitor coral growth and geologists need recordings to model sediment transport. Furthermore, for offshore construction projects, maintenance and inspection millimeter-accurate measurements of defects and offshore structures are essential. While the process of digitizing individual objects and complete sites on land is well understood and standard methods, such as Structure from Motion or terrestrial laser scanning, are regularly applied, precise underwater surveying with high resolution is still a complex and difficult task. Applying optical scanning techniques in water is challenging due to reduced visibility caused by turbidity and light absorption. However, optical underwater scanners provide significant advantages in terms of achievable resolution and accuracy compared to acoustic systems. This thesis proposes an underwater laser scanning system and the algorithms for creating dense and accurate 3D scans in water. It is based on laser triangulation and the main optical components are an underwater camera and a cross-line laser projector. The prototype is configured with a motorized yaw axis for capturing scans from a tripod. Alternatively, it is mounted to a moving platform for mobile mapping. The main focus lies on the refractive calibration of the underwater camera and laser projector, the image processing and 3D reconstruction. For highest accuracy, the refraction at the individual media interfaces must be taken into account. This is addressed by an optimization-based calibration framework using a physical-geometric camera model derived from an analytical formulation of a ray-tracing projection model. In addition to scanning underwater structures, this work presents the 3D acquisition of semi-submerged structures and the correction of refraction effects. As in-situ calibration in water is complex and time-consuming, the challenge of transferring an in-air scanner calibration to water without re-calibration is investigated, as well as self-calibration techniques for structured light. The system was successfully deployed in various configurations for both static scanning and mobile mapping. An evaluation of the calibration and 3D reconstruction using reference objects and a comparison of free-form surfaces in clear water demonstrate the high accuracy potential in the range of one millimeter to less than one centimeter, depending on the measurement distance. Mobile underwater mapping and motion compensation based on visual-inertial odometry is demonstrated using a new optical underwater scanner based on fringe projection. Continuous registration of individual scans allows the acquisition of 3D models from an underwater vehicle. RGB images captured in parallel are used to create 3D point clouds of underwater scenes in full color. 3D maps are useful to the operator during the remote control of underwater vehicles and provide the building blocks to enable offshore inspection and surveying tasks. The advancing automation of the measurement technology will allow non-experts to use it, significantly reduce acquisition time and increase accuracy, making underwater metrology more cost-effective. N2 - Das Interesse an präziser, zuverlässiger und zugleich kostengünstiger Unterwassermesstechnik ist groß. Beispielsweise wollen Archäologen Artefakte in situ mit hoher Detailtreue dokumentieren und in der Meeresforschung benötigen Biologen Messwerkzeuge zur Beobachtung des Korallenwachstums. Auch Geologen sind auf Messdaten angewiesen, um Sedimenttransporte zu modellieren. Darüber hinaus ist für die Errichtung von Offshore-Bauwerken, sowie deren Wartung und Inspektion eine millimetergenaue Vermessung von vorhandenen Strukturen und Defekten unerlässlich. Während die Digitalisierung einzelner Objekte und ganzer Areale an Land gut erforscht ist und verschiedene Standardmethoden, wie zum Beispiel Structure from Motion oder terrestrisches Laserscanning, regelmäßig eingesetzt werden, ist die präzise und hochauflösende Unterwasservermessung nach wie vor eine komplexe und schwierige Aufgabe. Die Anwendung optischer Messtechnik im Wasser ist aufgrund der eingeschränkten Sichttiefe durch Trübung und Lichtabsorption eine Herausforderung. Optische Unterwasserscanner bieten jedoch Vorteile hinsichtlich der erreichbaren Auflösung und Genauigkeit gegenüber akustischen Systemen. In dieser Arbeit werden ein Unterwasser-Laserscanning-System und die Algorithmen zur Erzeugung von 3D-Scans mit hoher Punktdichte im Wasser vorgestellt. Es basiert auf Lasertriangulation und die optischen Hauptkomponenten sind eine Unterwasserkamera und ein Kreuzlinienlaserprojektor. Das System ist mit einer motorisierten Drehachse ausgestattet, um Scans von einem Stativ aus aufzunehmen. Alternativ kann es von einer beweglichen Plattform aus für mobile Kartierung eingesetzt werden. Das Hauptaugenmerk liegt auf der refraktiven Kalibrierung der Unterwasserkamera und des Laserprojektors, der Bildverarbeitung und der 3D-Rekonstruktion. Um höchste Genauigkeit zu erreichen, muss die Brechung an den einzelnen Medienübergängen berücksichtigt werden. Dies wird durch ein physikalisch-geometrisches Kameramodell, das auf einer analytischen Beschreibung der Strahlenverfolgung basiert, und ein optimierungsbasiertes Kalibrierverfahren erreicht. Neben dem Scannen von Unterwasserstrukturen wird in dieser Arbeit auch die 3D-Erfassung von teilweise im Wasser befindlichen Strukturen und die Korrektur der dabei auftretenden Brechungseffekte vorgestellt. Da die Kalibrierung im Wasser komplex und zeitintensiv ist, wird die Übertragung einer Kalibrierung des Scanners in Luft auf die Bedingungen im Wasser ohne Neukalibrierung, sowie die Selbstkalibrierung für Lichtschnittverfahren untersucht. Das System wurde in verschiedenen Konfigurationen sowohl für statisches Scannen als auch für die mobile Kartierung erfolgreich eingesetzt. Die Validierung der Kalibrierung und der 3D-Rekonstruktion anhand von Referenzobjekten und der Vergleich von Freiformflächen in klarem Wasser zeigen das hohe Genauigkeitspotenzial im Bereich von einem Millimeter bis weniger als einem Zentimeter in Abhängigkeit von der Messdistanz. Die mobile Unterwasserkartierung und Bewegungskompensation anhand visuell-inertialer Odometrie wird mit einem neuen optischen Unterwasserscanner auf Basis der Streifenprojektion demonstriert. Dabei ermöglicht die kontinuierliche Registrierung von Einzelscans die Erfassung von 3D-Modellen von einem Unterwasserfahrzeug aus. Mit Hilfe von parallel aufgenommenen RGB-Bildern werden dabei farbige 3D-Punktwolken der Unterwasserszenen erstellt. Diese 3D-Karten dienen beispielsweise dem Bediener bei der Fernsteuerung von Unterwasserfahrzeugen und bilden die Grundlage für Offshore-Inspektions- und Vermessungsaufgaben. Die fortschreitende Automatisierung der Messtechnik wird somit auch eine Verwendung durch Nichtfachleute ermöglichen und gleichzeitig die Erfassungszeit erheblich verkürzen und die Genauigkeit verbessern, was die Vermessung im Wasser kostengünstiger und effizienter macht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 28 KW - Selbstkalibrierung KW - Punktwolke KW - Bildverarbeitung KW - 3D Reconstruction KW - Self-calibration KW - Underwater Scanning KW - Underwater Mapping KW - Dreidimensionale Rekonstruktion KW - 3D-Rekonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322693 SN - 978-3-945459-45-4 ER - TY - JOUR A1 - Kuhn, Joachim A1 - Gripp, Tatjana A1 - Flieder, Tobias A1 - Dittrich, Marcus A1 - Hendig, Doris A1 - Busse, Jessica A1 - Knabbe, Cornelius A1 - Birschmann, Ingvild T1 - UPLC-MRM Mass Spectrometry Method for Measurement of the Coagulation Inhibitors Dabigatran and Rivaroxaban in Human Plasma and Its Comparison with Functional Assays JF - PLOS ONE N2 - Introduction The fast, precise, and accurate measurement of the new generation of oral anticoagulants such as dabigatran and rivaroxaban in patients' plasma my provide important information in different clinical circumstances such as in the case of suspicion of overdose, when patients switch from existing oral anticoagulant, in patients with hepatic or renal impairment, by concomitant use of interaction drugs, or to assess anticoagulant concentration in patients' blood before major surgery. Methods Here, we describe a quick and precise method to measure the coagulation inhibitors dabigatran and rivaroxaban using ultra-performance liquid chromatography electrospray ionization-tandem mass spectrometry in multiple reactions monitoring (MRM) mode (UPLC-MRM MS). Internal standards (ISs) were added to the sample and after protein precipitation; the sample was separated on a reverse phase column. After ionization of the analytes the ions were detected using electrospray ionization-tandem mass spectrometry. Run time was 2.5 minutes per injection. Ion suppression was characterized by means of post-column infusion. Results The calibration curves of dabigatran and rivaroxaban were linear over the working range between 0.8 and 800 mu g/L (r > 0.99). Limits of detection (LOD) in the plasma matrix were 0.21 mu g/L for dabigatran and 0.34 mu g/L for rivaroxaban, and lower limits of quantification (LLOQ) in the plasma matrix were 0.46 mu g/L for dabigatran and 0.54 mu g/L for rivaroxaban. The intraassay coefficients of variation (CVs) for dabigatran and rivaroxaban were < 4% and 6%; respectively, the interassay CVs were < 6% for dabigatran and < 9% for rivaroxaban. Inaccuracy was < 5% for both substances. The mean recovery was 104.5% (range 83.8-113.0%) for dabigatran and 87.0%(range 73.6-105.4%) for rivaroxaban. No significant ion suppressions were detected at the elution times of dabigatran or rivaroxaban. Both coagulation inhibitors were stable in citrate plasma at -20 degrees C, 4 degrees C and even at RT for at least one week. A method comparison between our UPLC-MRM MS method, the commercially available automated Direct Thrombin Inhibitor assay (DTI assay) for dabigatran measurement from CoaChrom Diagnostica, as well as the automated anti-Xa assay for rivaroxaban measurement from Chromogenix both performed by ACL-TOP showed a high degree of correlation. However, UPLC-MRM MS measurement of dabigatran and rivaroxaban has a much better selectivity than classical functional assays measuring activities of various coagulation factors which are susceptible to interference by other coagulant drugs. Conclusions Overall, we developed and validated a sensitive and specific UPLC-MRM MS assay for the quick and specific measurement of dabigatran and rivaroxaban in human plasma. KW - LC-MS/MS KW - validation KW - serum KW - quantification KW - apixaban KW - diagnostic accuracy KW - performance liquid chromatography KW - factor XA inhibitor KW - direct oral anticoagulants KW - direct thrombin inhibitor Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136023 VL - 10 IS - 12 ER - TY - JOUR A1 - Loh, Frank A1 - Poignée, Fabian A1 - Wamser, Florian A1 - Leidinger, Ferdinand A1 - Hoßfeld, Tobias T1 - Uplink vs. Downlink: Machine Learning-Based Quality Prediction for HTTP Adaptive Video Streaming JF - Sensors N2 - Streaming video is responsible for the bulk of Internet traffic these days. For this reason, Internet providers and network operators try to make predictions and assessments about the streaming quality for an end user. Current monitoring solutions are based on a variety of different machine learning approaches. The challenge for providers and operators nowadays is that existing approaches require large amounts of data. In this work, the most relevant quality of experience metrics, i.e., the initial playback delay, the video streaming quality, video quality changes, and video rebuffering events, are examined using a voluminous data set of more than 13,000 YouTube video streaming runs that were collected with the native YouTube mobile app. Three Machine Learning models are developed and compared to estimate playback behavior based on uplink request information. The main focus has been on developing a lightweight approach using as few features and as little data as possible, while maintaining state-of-the-art performance. KW - HTTP adaptive video streaming KW - quality of experience prediction KW - machine learning Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241121 SN - 1424-8220 VL - 21 IS - 12 ER - TY - JOUR A1 - Liman, Leon A1 - May, Bernd A1 - Fette, Georg A1 - Krebs, Jonathan A1 - Puppe, Frank T1 - Using a clinical data warehouse to calculate and present key metrics for the radiology department: implementation and performance evaluation JF - JMIR Medical Informatics N2 - Background: Due to the importance of radiologic examinations, such as X-rays or computed tomography scans, for many clinical diagnoses, the optimal use of the radiology department is 1 of the primary goals of many hospitals. Objective: This study aims to calculate the key metrics of this use by creating a radiology data warehouse solution, where data from radiology information systems (RISs) can be imported and then queried using a query language as well as a graphical user interface (GUI). Methods: Using a simple configuration file, the developed system allowed for the processing of radiology data exported from any kind of RIS into a Microsoft Excel, comma-separated value (CSV), or JavaScript Object Notation (JSON) file. These data were then imported into a clinical data warehouse. Additional values based on the radiology data were calculated during this import process by implementing 1 of several provided interfaces. Afterward, the query language and GUI of the data warehouse were used to configure and calculate reports on these data. For the most common types of requested reports, a web interface was created to view their numbers as graphics. Results: The tool was successfully tested with the data of 4 different German hospitals from 2018 to 2021, with a total of 1,436,111 examinations. The user feedback was good, since all their queries could be answered if the available data were sufficient. The initial processing of the radiology data for using them with the clinical data warehouse took (depending on the amount of data provided by each hospital) between 7 minutes and 1 hour 11 minutes. Calculating 3 reports of different complexities on the data of each hospital was possible in 1-3 seconds for reports with up to 200 individual calculations and in up to 1.5 minutes for reports with up to 8200 individual calculations. Conclusions: A system was developed with the main advantage of being generic concerning the export of different RISs as well as concerning the configuration of queries for various reports. The queries could be configured easily using the GUI of the data warehouse, and their results could be exported into the standard formats Excel and CSV for further processing. KW - data warehouse KW - eHealth KW - hospital data KW - electronic health records KW - radiology KW - statistics and numerical data KW - medical records Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349411 SN - 2291-9694 VL - 11 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Using Machine Learning Algorithms for Categorizing Quranic Chaptersby Major Phases of Prophet Mohammad’s Messengership N2 - This paper discusses the categorization of Quranic chapters by major phases of Prophet Mohammad’s messengership using machine learning algorithms. First, the chapters were categorized by places of revelation using Support Vector Machine and naïve Bayesian classifiers separately, and their results were compared to each other, as well as to the existing traditional Islamic and western orientalists classifications. The chapters were categorized into Meccan (revealed in Mecca) and Medinan (revealed in Medina). After that, chapters of each category were clustered using a kind of fuzzy-single linkage clustering approach, in order to correspond to the major phases of Prophet Mohammad’s life. The major phases of the Prophet’s life were manually derived from the Quranic text, as well as from the secondary Islamic literature e.g hadiths, exegesis. Previous studies on computing the places of revelation of Quranic chapters relied heavily on features extracted from existing background knowledge of the chapters. For instance, it is known that Meccan chapters contain mostly verses about faith and related problems, while Medinan ones encompass verses dealing with social issues, battles…etc. These features are by themselves insufficient as a basis for assigning the chapters to their respective places of revelation. In fact, there are exceptions, since some chapters do contain both Meccan and Medinan features. In this study, features of each category were automatically created from very few chapters, whose places of revelation have been determined through identification of historical facts and events such as battles, migration to Medina…etc. Chapters having unanimously agreed places of revelation were used as the initial training set, while the remaining chapters formed the testing set. The classification process was made recursive by regularly augmenting the training set with correctly classified chapters, in order to classify the whole testing set. Each chapter was preprocessed by removing unimportant words, stemming, and representation with vector space model. The result of this study shows that, the two classifiers have produced useable results, with an outperformance of the support vector machine classifier. This study indicates that, the proposed methodology yields encouraging results for arranging Quranic chapters by phases of Prophet Mohammad’s messengership. KW - Koran KW - Maschinelles Lernen KW - Text categorization KW - Clustering KW - Support Vector Machine KW - Naïve Bayesian KW - Place of revelation KW - Stages of Prophet Mohammad’s messengership KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66862 ER - TY - RPRT A1 - Mazigh, Sadok Mehdi A1 - Beausencourt, Marcel A1 - Bode, Max Julius A1 - Scheffler, Thomas T1 - Using P4-INT on Tofino for Measuring Device Performance Characteristics in a Network Lab T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper presents a prototypical implementation of the In-band Network Telemetry (INT) specification in P4 and demonstrates a use case, where a Tofino Switch is used to measure device and network performance in a lab setting. This work is based on research activities in the area of P4 data plane programming conducted at the network lab of HTW Berlin. KW - P4-INT Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322084 ER -