TY - JOUR A1 - Oberdörfer, Sebastian A1 - Birnstiel, Sandra A1 - Latoschik, Marc Erich A1 - Grafe, Silke T1 - Mutual Benefits: Interdisciplinary Education of Pre-Service Teachers and HCI Students in VR/AR Learning Environment Design JF - Frontiers in Education N2 - The successful development and classroom integration of Virtual (VR) and Augmented Reality (AR) learning environments requires competencies and content knowledge with respect to media didactics and the respective technologies. The paper discusses a pedagogical concept specifically aiming at the interdisciplinary education of pre-service teachers in collaboration with human-computer interaction students. The students’ overarching goal is the interdisciplinary realization and integration of VR/AR learning environments in teaching and learning concepts. To assist this approach, we developed a specific tutorial guiding the developmental process. We evaluate and validate the effectiveness of the overall pedagogical concept by analyzing the change in attitudes regarding 1) the use of VR/AR for educational purposes and in competencies and content knowledge regarding 2) media didactics and 3) technology. Our results indicate a significant improvement in the knowledge of media didactics and technology. We further report on four STEM learning environments that have been developed during the seminar. KW - interdisciplinary education KW - virtual reality KW - augmented reality KW - serious games KW - learning environments KW - teacher education Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241612 SN - 2504-284X VL - 6 ER - TY - JOUR A1 - Bencurova, Elena A1 - Shityakov, Sergey A1 - Schaack, Dominik A1 - Kaltdorf, Martin A1 - Sarukhanyan, Edita A1 - Hilgarth, Alexander A1 - Rath, Christin A1 - Montenegro, Sergio A1 - Roth, Günter A1 - Lopez, Daniel A1 - Dandekar, Thomas T1 - Nanocellulose composites as smart devices with chassis, light-directed DNA Storage, engineered electronic properties, and chip integration JF - Frontiers in Bioengineering and Biotechnology N2 - The rapid development of green and sustainable materials opens up new possibilities in the field of applied research. Such materials include nanocellulose composites that can integrate many components into composites and provide a good chassis for smart devices. In our study, we evaluate four approaches for turning a nanocellulose composite into an information storage or processing device: 1) nanocellulose can be a suitable carrier material and protect information stored in DNA. 2) Nucleotide-processing enzymes (polymerase and exonuclease) can be controlled by light after fusing them with light-gating domains; nucleotide substrate specificity can be changed by mutation or pH change (read-in and read-out of the information). 3) Semiconductors and electronic capabilities can be achieved: we show that nanocellulose is rendered electronic by iodine treatment replacing silicon including microstructures. Nanocellulose semiconductor properties are measured, and the resulting potential including single-electron transistors (SET) and their properties are modeled. Electric current can also be transported by DNA through G-quadruplex DNA molecules; these as well as classical silicon semiconductors can easily be integrated into the nanocellulose composite. 4) To elaborate upon miniaturization and integration for a smart nanocellulose chip device, we demonstrate pH-sensitive dyes in nanocellulose, nanopore creation, and kinase micropatterning on bacterial membranes as well as digital PCR micro-wells. Future application potential includes nano-3D printing and fast molecular processors (e.g., SETs) integrated with DNA storage and conventional electronics. This would also lead to environment-friendly nanocellulose chips for information processing as well as smart nanocellulose composites for biomedical applications and nano-factories. KW - nanocellulose KW - DNA storage KW - light-gated proteins KW - single-electron transistors KW - protein chip Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-283033 SN - 2296-4185 VL - 10 ER - TY - THES A1 - Fleszar, Krzysztof T1 - Network-Design Problems in Graphs and on the Plane T1 - Netzwerk-Design-Probleme in Graphen und auf der Ebene N2 - A network design problem defines an infinite set whose elements, called instances, describe relationships and network constraints. It asks for an algorithm that, given an instance of this set, designs a network that respects the given constraints and at the same time optimizes some given criterion. In my thesis, I develop algorithms whose solutions are optimum or close to an optimum value within some guaranteed bound. I also examine the computational complexity of these problems. Problems from two vast areas are considered: graphs and the Euclidean plane. In the Maximum Edge Disjoint Paths problem, we are given a graph and a subset of vertex pairs that are called terminal pairs. We are asked for a set of paths where the endpoints of each path form a terminal pair. The constraint is that any two paths share at most one inner vertex. The optimization criterion is to maximize the cardinality of the set. In the hard-capacitated k-Facility Location problem, we are given an integer k and a complete graph where the distances obey a given metric and where each node has two numerical values: a capacity and an opening cost. We are asked for a subset of k nodes, called facilities, and an assignment of all the nodes, called clients, to the facilities. The constraint is that the number of clients assigned to a facility cannot exceed the facility's capacity value. The optimization criterion is to minimize the total cost which consists of the total opening cost of the facilities and the total distance between the clients and the facilities they are assigned to. In the Stabbing problem, we are given a set of axis-aligned rectangles in the plane. We are asked for a set of horizontal line segments such that, for every rectangle, there is a line segment crossing its left and right edge. The optimization criterion is to minimize the total length of the line segments. In the k-Colored Non-Crossing Euclidean Steiner Forest problem, we are given an integer k and a finite set of points in the plane where each point has one of k colors. For every color, we are asked for a drawing that connects all the points of the same color. The constraint is that drawings of different colors are not allowed to cross each other. The optimization criterion is to minimize the total length of the drawings. In the Minimum Rectilinear Polygon for Given Angle Sequence problem, we are given an angle sequence of left (+90°) turns and right (-90°) turns. We are asked for an axis-parallel simple polygon where the angles of the vertices yield the given sequence when walking around the polygon in counter-clockwise manner. The optimization criteria considered are to minimize the perimeter, the area, and the size of the axis-parallel bounding box of the polygon. N2 - Ein Netzwerk-Design-Problem definiert eine unendliche Menge, deren Elemente, als Instanzen bezeichnet, Beziehungen und Beschränkungen in einem Netzwerk beschreiben. Die Lösung eines solchen Problems besteht aus einem Algorithmus, der auf die Eingabe einer beliebigen Instanz dieser Menge ein Netzwerk entwirft, welches die gegebenen Beschränkungen einhält und gleichzeitig ein gegebenes Kriterium optimiert. In meiner Dissertation habe ich Algorithmen entwickelt, deren Netzwerke stets optimal sind oder nachweisbar nahe am Optimum liegen. Zusätzlich habe ich die Berechnungskomplexität dieser Probleme untersucht. Dabei wurden Probleme aus zwei weiten Gebieten betrachtet: Graphen und der Euklidische Ebene. Im Maximum-Edge-Disjoint-Paths-Problem besteht die Eingabe aus einem Graphen und einer Teilmenge von Knotenpaaren, die wir mit Terminalpaare bezeichnen. Gesucht ist eine Menge von Pfaden, die Terminalpaare verbinden. Die Beschränkung ist, dass keine zwei Pfade einen gleichen inneren Knoten haben dürfen. Das Optimierungskriterium ist die Maximierung der Kardinalität dieser Menge. Im Hard-Capacitated-k-Facility-Location-Problem besteht die Eingabe aus einer Ganzzahl k und einem vollständigen Graphen, in welchem die Distanzen einer gegebenen Metrik unterliegen und in welchem jedem Knoten sowohl eine numerische Kapazität als auch ein Eröffnungskostenwert zugeschrieben ist. Gesucht ist eine Teilmenge von k Knoten, Facilities genannt, und eine Zuweisung aller Knoten, Clients genannt, zu den Facilities. Die Beschränkung ist, dass die Anzahl der Clients, die einer Facility zugewiesen sind, nicht deren Kapazität überschreiten darf. Das Optimierungskriterium ist die Minimierung der Gesamtkosten bestehend aus den Gesamteröffnungskosten der Facilities sowie der Gesamtdistanz zwischen den Clients und den ihnen zugewiesenen Facilities. Im Stabbing-Problem besteht die Eingabe aus einer Menge von achsenparallelen Rechtecken in der Ebene. Gesucht ist eine Menge von horizontalen Geradenstücken mit der Randbedingung, dass die linke und rechte Seite eines jeden Rechtecks von einem Geradenstück verbunden ist. Das Optimierungskriterium ist die Minimierung der Gesamtlänge aller Geradenstücke. Im k-Colored-Non-Crossing-Euclidean-Steiner-Forest-Problem besteht die Eingabe aus einer Ganzzahl k und einer endlichen Menge von Punkten in der Ebene, wobei jeder Punkt in einer von k Farben gefärbt ist. Gesucht ist für jede Farbe eine Zeichnung, in welcher alle Punkte der Farbe verbunden sind. Die Beschränkung ist, dass Zeichnungen verschiedener Farben sich nicht kreuzen dürfen. Das Optimierungskriterium ist die Minimierung des Gesamtintenverbrauchs, das heißt, der Gesamtlänge der Zeichnungen. Im Minimum-Rectilinear-Polygon-for-Given-Angle-Sequence-Problem besteht die Eingabe aus einer Folge von Links- (+90°) und Rechtsabbiegungen (-90°). Gesucht ist ein achsenparalleles Polygon dessen Eckpunkte die gegebene Folge ergeben, wenn man das Polygon gegen den Uhrzeigersinn entlangläuft. Die Optimierungskriterien sind die Minimierung des Umfangs und der inneren Fläche des Polygons sowie der Größe des notwendigen Zeichenblattes, d.h., des kleinsten Rechteckes, das das Polygon einschließt. N2 - Given points in the plane, connect them using minimum ink. Though the task seems simple, it turns out to be very time consuming. In fact, scientists believe that computers cannot efficiently solve it. So, do we have to resign? This book examines such NP-hard network-design problems, from connectivity problems in graphs to polygonal drawing problems on the plane. First, we observe why it is so hard to optimally solve these problems. Then, we go over to attack them anyway. We develop fast algorithms that find approximate solutions that are very close to the optimal ones. Hence, connecting points with slightly more ink is not hard. KW - Euklidische Ebene KW - Algorithmus KW - Komplexität KW - NP-schweres Problem KW - Graph KW - approximation algorithm KW - hardness KW - optimization KW - graphs KW - network KW - Optimierungsproblem KW - Approximationsalgorithmus KW - complexity KW - Euclidean plane Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154904 SN - 978-3-95826-076-4 (Print) SN - 978-3-95826-077-1 (Online) N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-076-4, 28,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - RPRT A1 - Simon, Manuel A1 - Gallenmüller, Sebastian A1 - Carle, Georg T1 - Never Miss Twice - Add-On-Miss Table Updates in Software Data Planes T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - State Management at line rate is crucial for critical applications in next-generation networks. P4 is a language used in software-defined networking to program the data plane. The data plane can profit in many circumstances when it is allowed to manage its state without any detour over a controller. This work is based on a previous study by investigating the potential and performance of add-on-miss insertions of state by the data plane. The state keeping capabilities of P4 are limited regarding the amount of data and the update frequency. We follow the tentative specification of an upcoming portable-NIC-architecture and implement these changes into the software P4 target T4P4S. We show that insertions are possible with only a slight overhead compared to lookups and evaluate the influence of the rate of insertions on their latency. KW - SDN KW - state management KW - P4 KW - Add-on-Miss Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322071 ER - TY - THES A1 - Schröter, Martin T1 - Newton Methods for Image Registration T1 - Newton-Methoden zur Bildregistrierung N2 - Consider the situation where two or more images are taken from the same object. After taking the first image, the object is moved or rotated so that the second recording depicts it in a different manner. Additionally, take heed of the possibility that the imaging techniques may have also been changed. One of the main problems in image processing is to determine the spatial relation between such images. The corresponding process of finding the spatial alignment is called “registration”. In this work, we study the optimization problem which corresponds to the registration task. Especially, we exploit the Lie group structure of the set of transformations to construct efficient, intrinsic algorithms. We also apply the algorithms to medical registration tasks. However, the methods developed are not restricted to the field of medical image processing. We also have a closer look at more general forms of optimization problems and show connections to related tasks. N2 - Wir betrachten Problemstellungen, in denen zwei Bilder von ein und demselben Objekt aufgenommen wurden. Nach der ersten Aufnahme hat sich allerdings das Objekt bewegt oder deformiert, so dass es sich in den nächsten Bildern auf eine andere Weise darstellt. Zudem kann sich die Aufnahmetechnik geändert haben. Eine der Hauptprobleme in der Bildverarbeitung ist es, die räumliche Korrespondenz zwischen solchen Bildern zu bestimmen. Die zugehörige Aufgabe, eine solche räumliche Übereinstimmung zu finden, nennt man "Registrierung". In dieser Arbeit untersuchen wir das mit der Registrierung verbundene Optimierungsproblem. Insbesondere nutzen wir die Lie-Gruppen-Struktur der Menge der zulässigen Transformationen aus, um effiziente, intrinsische Argorithmen zu entwickeln. Wir wenden diese dann auf Probleme der medizinischen Bildregistrierung an, jedoch sind unsere Methoden nicht auf dieses Feld beschränkt. Wir werfen auch einen genaueren Blick auf eine allgemeinere Form von Optimierungsproblemen und zeigen Verknüpfungen zu verwandten Fragestellungen auf. KW - Newton-Verfahren KW - Registrierung KW - Stochastische Optimierung KW - Newton Methods KW - Image Registration KW - Stochastic Algorithms KW - Optimization on Lie Groups Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-71490 ER - TY - RPRT A1 - Deutschmann, Jörg A1 - Hielscher, Kai-Steffen A1 - German, Reinhard T1 - Next-Generation Satellite Communication Networks T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This paper gives an overview of our recent activities in the field of satellite communication networks, including an introduction to geostationary satellite systems and Low Earth Orbit megaconstellations. To mitigate the high latencies of geostationary satellite networks, TCP-splitting Performance Enhancing Proxies are deployed. However, these cannot be applied in the case of encrypted transport headers as it is the case for VPNs or QUIC. We summarize performance evaluation results from multiple measurement campaigns. In a recently concluded project, multipath communication was used to combine the advantages of very heterogeneous communication paths: low data rate, low latency (e.g., DSL light) and high data rate, high latency (e.g., geostationary satellite). KW - Datennetz KW - satellite communication KW - Performance Enhancing Proxies KW - transport protocols KW - VPN KW - QUIC KW - multipath communication KW - hybrid access Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280732 ER - TY - JOUR A1 - Obremski, David A1 - Lugrin, Jean-Luc A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - Non-native speaker perception of Intelligent Virtual Agents in two languages: the impact of amount and type of grammatical mistakes JF - Journal on Multimodal User Interfaces N2 - Having a mixed-cultural membership becomes increasingly common in our modern society. It is thus beneficial in several ways to create Intelligent Virtual Agents (IVAs) that reflect a mixed-cultural background as well, e.g., for educational settings. For research with such IVAs, it is essential that they are classified as non-native by members of a target culture. In this paper, we focus on variations of IVAs’ speech to create the impression of non-native speakers that are identified as such by speakers of two different mother tongues. In particular, we investigate grammatical mistakes and identify thresholds beyond which the agents is clearly categorised as a non-native speaker. Therefore, we conducted two experiments: one for native speakers of German, and one for native speakers of English. Results of the German study indicate that beyond 10% of word order mistakes and 25% of infinitive mistakes German-speaking IVAs are perceived as non-native speakers. Results of the English study indicate that beyond 50% of omission mistakes and 50% of infinitive mistakes English-speaking IVAs are perceived as non-native speakers. We believe these thresholds constitute helpful guidelines for computational approaches of non-native speaker generation, simplifying research with IVAs in mixed-cultural settings. KW - mixed-cultural settings KW - Intelligent Virtual Agents KW - verbal behaviour Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269984 SN - 1783-8738 VL - 15 IS - 2 ER - TY - JOUR A1 - Kern, Florian A1 - Kullmann, Peter A1 - Ganal, Elisabeth A1 - Korwisi, Kristof A1 - Stingl, René A1 - Niebling, Florian A1 - Latoschik, Marc Erich T1 - Off-The-Shelf Stylus: Using XR Devices for Handwriting and Sketching on Physically Aligned Virtual Surfaces JF - Frontiers in Virtual Reality N2 - This article introduces the Off-The-Shelf Stylus (OTSS), a framework for 2D interaction (in 3D) as well as for handwriting and sketching with digital pen, ink, and paper on physically aligned virtual surfaces in Virtual, Augmented, and Mixed Reality (VR, AR, MR: XR for short). OTSS supports self-made XR styluses based on consumer-grade six-degrees-of-freedom XR controllers and commercially available styluses. The framework provides separate modules for three basic but vital features: 1) The stylus module provides stylus construction and calibration features. 2) The surface module provides surface calibration and visual feedback features for virtual-physical 2D surface alignment using our so-called 3ViSuAl procedure, and surface interaction features. 3) The evaluation suite provides a comprehensive test bed combining technical measurements for precision, accuracy, and latency with extensive usability evaluations including handwriting and sketching tasks based on established visuomotor, graphomotor, and handwriting research. The framework’s development is accompanied by an extensive open source reference implementation targeting the Unity game engine using an Oculus Rift S headset and Oculus Touch controllers. The development compares three low-cost and low-tech options to equip controllers with a tip and includes a web browser-based surface providing support for interacting, handwriting, and sketching. The evaluation of the reference implementation based on the OTSS framework identified an average stylus precision of 0.98 mm (SD = 0.54 mm) and an average surface accuracy of 0.60 mm (SD = 0.32 mm) in a seated VR environment. The time for displaying the stylus movement as digital ink on the web browser surface in VR was 79.40 ms on average (SD = 23.26 ms), including the physical controller’s motion-to-photon latency visualized by its virtual representation (M = 42.57 ms, SD = 15.70 ms). The usability evaluation (N = 10) revealed a low task load, high usability, and high user experience. Participants successfully reproduced given shapes and created legible handwriting, indicating that the OTSS and it’s reference implementation is ready for everyday use. We provide source code access to our implementation, including stylus and surface calibration and surface interaction features, making it easy to reuse, extend, adapt and/or replicate previous results (https://go.uniwue.de/hci-otss). KW - virtual reality KW - augmented reality KW - handwriting KW - sketching KW - stylus KW - user interaction KW - usability evaluation KW - passive haptic feedback Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260219 VL - 2 ER - TY - RPRT A1 - Herrmann, Martin A1 - Rizk, Amr T1 - On Data Plane Multipath Scheduling for Connected Mobility Applications T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized. KW - multipath scheduling KW - connected mobility applications Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322033 N1 - Aktualisierte Version unter https://doi.org/10.25972/OPUS-35344 ER - TY - RPRT A1 - Herrmann, Martin A1 - Rizk, Amr T1 - On Data Plane Multipath Scheduling for Connected Mobility Applications T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized. KW - multipath scheduling KW - connected mobility applications Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-353444 N1 - Ursprüngliche Version unter https://doi.org/10.25972/OPUS-32203 ET - aktualisierte Version ER - TY - THES A1 - Winkler, Marco T1 - On the Role of Triadic Substructures in Complex Networks T1 - Über die Bedeutung von Dreiecksstrukturen in komplexen Netzwerken N2 - In the course of the growth of the Internet and due to increasing availability of data, over the last two decades, the field of network science has established itself as an own area of research. With quantitative scientists from computer science, mathematics, and physics working on datasets from biology, economics, sociology, political sciences, and many others, network science serves as a paradigm for interdisciplinary research. One of the major goals in network science is to unravel the relationship between topological graph structure and a network’s function. As evidence suggests, systems from the same fields, i.e. with similar function, tend to exhibit similar structure. However, it is still vague whether a similar graph structure automatically implies likewise function. This dissertation aims at helping to bridge this gap, while particularly focusing on the role of triadic structures. After a general introduction to the main concepts of network science, existing work devoted to the relevance of triadic substructures is reviewed. A major challenge in modeling triadic structure is the fact that not all three-node subgraphs can be specified independently of each other, as pairs of nodes may participate in multiple of those triadic subgraphs. In order to overcome this obstacle, we suggest a novel class of generative network models based on so called Steiner triple systems. The latter are partitions of a graph’s vertices into pair-disjoint triples (Steiner triples). Thus, the configurations on Steiner triples can be specified independently of each other without overdetermining the network’s link structure. Subsequently, we investigate the most basic realization of this new class of models. We call it the triadic random graph model (TRGM). The TRGM is parametrized by a probability distribution over all possible triadic subgraph patterns. In order to generate a network instantiation of the model, for all Steiner triples in the system, a pattern is drawn from the distribution and adjusted randomly on the Steiner triple. We calculate the degree distribution of the TRGM analytically and find it to be similar to a Poissonian distribution. Furthermore, it is shown that TRGMs possess non-trivial triadic structure. We discover inevitable correlations in the abundance of certain triadic subgraph patterns which should be taken into account when attributing functional relevance to particular motifs – patterns which occur significantly more frequently than expected at random. Beyond, the strong impact of the probability distributions on the Steiner triples on the occurrence of triadic subgraphs over the whole network is demonstrated. This interdependence allows us to design ensembles of networks with predefined triadic substructure. Hence, TRGMs help to overcome the lack of generative models needed for assessing the relevance of triadic structure. We further investigate whether motifs occur homogeneously or heterogeneously distributed over a graph. Therefore, we study triadic subgraph structures in each node’s neighborhood individually. In order to quantitatively measure structure from an individual node’s perspective, we introduce an algorithm for node-specific pattern mining for both directed unsigned, and undirected signed networks. Analyzing real-world datasets, we find that there are networks in which motifs are distributed highly heterogeneously, bound to the proximity of only very few nodes. Moreover, we observe indication for the potential sensitivity of biological systems to a targeted removal of these critical vertices. In addition, we study whole graphs with respect to the homogeneity and homophily of their node-specific triadic structure. The former describes the similarity of subgraph distributions in the neighborhoods of individual vertices. The latter quantifies whether connected vertices are structurally more similar than non-connected ones. We discover these features to be characteristic for the networks’ origins. Moreover, clustering the vertices of graphs regarding their triadic structure, we investigate structural groups in the neural network of C. elegans, the international airport-connection network, and the global network of diplomatic sentiments between countries. For the latter we find evidence for the instability of triangles considered socially unbalanced according to sociological theories. Finally, we utilize our TRGM to explore ensembles of networks with similar triadic substructure in terms of the evolution of dynamical processes acting on their nodes. Focusing on oscillators, coupled along the graphs’ edges, we observe that certain triad motifs impose a clear signature on the systems’ dynamics, even when embedded in a larger network structure. N2 - Im Zuge des Wachstums des Internets und der Verfügbarkeit nie da gewesener Datenmengen, hat sich, während der letzten beiden Jahrzehnte, die Netzwerkwissenschaft zu einer eigenständigen Forschungsrichtung entwickelt. Mit Wissenschaftlern aus quantitativen Feldern wie der Informatik, Mathematik und Physik, die Datensätze aus Biologie, den Wirtschaftswissenschaften, Soziologie, Politikwissenschaft und vielen weiteren Anwendungsgebieten untersuchen, stellt die Netzwerkwissenschaft ein Paradebeispiel interdisziplinärer Forschung dar. Eines der grundlegenden Ziele der Netzwerkwissenschaft ist es, den Zusammenhang zwischen der topologischen Struktur und der Funktion von Netzwerken herauszufinden. Es gibt zahlreiche Hinweise, dass Netz-werke aus den gleichen Bereichen, d.h. Systeme mit ähnlicher Funktion, auch ähnliche Graphstrukturen aufweisen. Es ist allerdings nach wie vor unklar, ob eine ähnliche Graphstruktur generell zu gleicher Funktionsweise führt. Es ist das Ziel der vorliegenden Dissertation, zur Klärung dieser Frage beizutragen. Das Hauptaugenmerk wird hierbei auf der Rolle von Dreiecksstrukturen liegen. Nach einer allgemeinen Einführung der wichtigsten Grundlagen der Theorie komplexer Netzwerke, wird eine Übersicht über existierende Arbeiten zur Bedeutung von Dreiecksstrukturen gegeben. Eine der größten Herausforderungen bei der Modellierung triadischer Strukturen ist die Tatsache, dass nicht alle Dreiecksbeziehungen in einem Graphen unabhängig voneinander bestimmt werden können, da zwei Knoten an mehreren solcher Dreiecksbeziehungen beteiligt sein können. Um dieses Problem zu lösen, führen wir, basierend auf sogenannten Steiner-Tripel-Systemen, eine neue Klasse generativer Netzwerkmodelle ein. Steiner-Tripel-Systeme sind Zerlegungen der Knoten eines Graphen in paarfremde Tripel (Steiner-Tripel). Daher können die Konfigurationen auf Steiner-Tripeln unabhängig voneinander gewählt werden, ohne dass dies zu einer Überbestimmung der Netzwerkstruktur führen würde. Anschließend untersuchen wir die grundlegendste Realisierung dieser neuen Klasse von Netzwerkmodellen, die wir das triadische Zufallsgraph-Modell (engl. triadic random graph model, TRGM) nennen. TRGMs werden durch eine Wahrscheinlichkeitsverteilung über alle möglichen Dreiecksstrukturen parametrisiert. Um ein konkretes Netzwerk zu erzeugen wird für jedes Steiner-Tripel eine Dreiecksstruktur gemäß der Wahrscheinlichkeitsverteilung gezogen und zufällig auf dem Tripel orientiert. Wir berechnen die Knotengradverteilung des TRGM analytisch und finden heraus, dass diese einer Poissonverteilung ähnelt. Des Weiteren wird gezeigt, dass TRGMs nichttriviale Dreiecksstrukturen aufweisen. Außerdem finden wir unvermeidliche Korrelationen im Auftreten bestimmter Subgraphen, derer man sich bewusst sein sollte. Insbesondere wenn es darum geht, die Bedeutung sogenannter Motive (Strukturen, die signifikant häufiger als zufällig erwartet auftreten) zu beurteilen. Darüber hinaus wird der starke Einfluss der Wahrscheinlichkeitsverteilung auf den Steiner-Tripeln, auf die generelle Dreiecksstruktur der erzeugten Netzwerke gezeigt. Diese Abhängigkeit ermöglicht es, Netzwerkensembles mit vorgegebener Dreiecksstruktur zu konzipieren. Daher helfen TRGMs dabei, den bestehenden Mangel an generativen Netzwerkmodellen, zur Beurteilung der Bedeutung triadischer Strukturen in Graphen, zu beheben. Es wird ferner untersucht, wie homogen Motive räumlich über Graphstrukturen verteilt sind. Zu diesem Zweck untersuchen wir das Auftreten von Dreiecksstrukturen in der Umgebung jedes Knotens separat. Um die Struktur individueller Knoten quantitativ erfassen zu können, führen wir einen Algorithmus zur knotenspezifischen Musterauswertung (node-specific pattern mining) ein, der sowohl auf gerichtete, als auch auf Graphen mit positiven und negativen Kanten angewendet werden kann. Bei der Analyse realer Datensätze beobachten wir, dass Motive in einigen Netzen hochgradig heterogen verteilt, und auf die Umgebung einiger, weniger Knoten beschränkt sind. Darüber hinaus finden wir Hinweise auf die mögliche Fehleranfälligkeit biologischer Systeme auf ein gezieltes Entfernen ebendieser Knoten. Des Weiteren studieren wir ganze Graphen bezüglich der Homogenität und Homophilie ihrer knotenspezifischen Dreiecksmuster. Erstere beschreibt die Ähnlichkeit der lokalen Dreiecksstrukturen zwischen verschiedenen Knoten. Letztere gibt an, ob sich verbundene Knoten bezüglich ihrer Dreiecksstruktur ähnlicher sind, als nicht verbundene Knoten. Wir stellen fest, dass diese Eigenschaften charakteristisch für die Herkunft der jeweiligen Netzwerke sind. Darüber hinaus gruppieren wir die Knoten verschiedener Systeme bezüglich der Ähnlichkeit ihrer lokalen Dreiecksstrukturen. Hierzu untersuchen wir das neuronale Netz von C. elegans, das internationale Flugverbindungsnetzwerk, sowie das Netzwerk internationaler Beziehungen zwischen Staaten. In Letzterem finden wir Hinweise darauf, dass Dreieckskonfigurationen, die nach soziologischen Theorien als unbalanciert gelten, besonders instabil sind. Schließlich verwenden wir unser TRGM, um Netzwerkensembles mit ähnlicher Dreiecksstruktur bezüglich der Eigenschaften dynamischer Prozesse, die auf ihren Knoten ablaufen, zu untersuchen. Wir konzentrieren uns auf Oszillatoren, die entlang der Kanten der Graphen miteinander gekoppelt sind. Hierbei beobachten wir, dass bestimmte Dreiecksmotive charakteristische Merkmale im dynamischen Verhalten der Systeme hinterlassen. Dies ist auch der Fall, wenn die Motive in eine größere Netzwerkstruktur eingebettet sind. KW - Netzwerk KW - Komplexes System KW - Substruktur KW - Dreieck KW - Networks KW - Complex Systems KW - Statistics KW - Machine Learning KW - Biological Networks KW - Statistische Physik KW - Statistische Mechanik KW - Data Mining KW - Maschinelles Lernen KW - Graphentheorie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-116022 SN - 978-3-7375-5654-5 PB - epubli GmbH CY - Berlin ER - TY - RPRT A1 - Funda, Christoph A1 - Marín García, Pablo A1 - German, Reinhard A1 - Hielscher, Kai-Steffen T1 - Online Algorithm for Arrival & Service Curve Estimation T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper presents a novel concept to extend state-of-the-art buffer monitoring with additional measures to estimate service-curves. The online algorithm for service-curve estimation replaces the state-of-the-art timestamp logging, as we expect it to overcome the main disadvantages of generating a huge amount of data and using a lot of CPU resources to store the data to a file during operation. We prove the accuracy of the online-algorithm offline with timestamp data and compare the derived bounds to the measured delay and backlog. We also do a proof-of- concept of the online-algorithm, implement it in LabVIEW and compare its performance to the timestamp logging by CPU load and data-size of the log-file. However, the implementation is still work-in-progress. KW - hardware-in-the-loop streaming system KW - network calculus KW - service-curve estimation KW - performance monitoring Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322112 ER - TY - THES A1 - Baier, Herbert T1 - Operators of Higher Order N2 - Motivated by results on interactive proof systems we investigate the computational power of quantifiers applied to well-known complexity classes. In special, we are interested in existential, universal and probabilistic bounded error quantifiers ranging over words and sets of words, i.e. oracles if we think in a Turing machine model. In addition to the standard oracle access mechanism, we also consider quantifiers ranging over oracles to which access is restricted in a certain way. N2 - Angeregt durch die Resultate über interaktive Beweissysteme untersuchen wir Quantoren in Anwendung auf bereits bekannte Komplexitätsklassen hinsichtlich ihrer dadurch gegebenen Berechnungsmächtigkeit. Von besonderem Interesse sind dabei existentielle und universelle Quantoren sowie Quantoren mit begrenzter Fehlerwahrscheinlichkeit, die alle über Wörter oder Wortmengen (Orakel im Kontext der Turingmaschinen) quantifizieren. Außer in Bezug auf den Standardmechanismus eines Orakelzugriffs werden auch Quantifizierungen über Orakel, für deren Zugriff gewisse Beschränkungen bestehen, betrachtet. KW - Komplexitätstheorie KW - Quantor KW - Operator KW - Komplexitätsklasse Y1 - 1998 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140799 SN - 3-8265-4008-5 PB - Shaker Verlag ER - TY - THES A1 - Hartmann, Matthias T1 - Optimization and Design of Network Architectures for Future Internet Routing T1 - Optimierung und Design von Netzwerkarchitekturen für zukünftiges Internet Routing N2 - At the center of the Internet’s protocol stack stands the Internet Protocol (IP) as a common denominator that enables all communication. To make routing efficient, resilient, and scalable, several aspects must be considered. Care must be taken that traffic is well balanced to make efficient use of the existing network resources, both in failure free operation and in failure scenarios. Finding the optimal routing in a network is an NP-complete problem. Therefore, routing optimization is usually performed using heuristics. This dissertation shows that a routing optimized with one objective function is often not good when looking at other objective functions. It can even be worse than unoptimized routing with respect to that objective function. After looking at failure-free routing and traffic distribution in different failure scenarios, the analysis is extended to include the loop-free alternate (LFA) IP fast reroute mechanism. Different application scenarios of LFAs are examined and a special focus is set on the fact that LFAs usually cannot protect all traffic in a network even against single link failures. Thus, the routing optimization for LFAs is targeted on both link utilization and failure coverage. Finally, the pre-congestion notification mechanism PCN for network admission control and overload protection is analyzed and optimized. Different design options for implementing the protocol are compared, before algorithms are developed for the calculation and optimization of protocol parameters and PCN-based routing. The second part of the thesis tackles a routing problem that can only be resolved on a global scale. The scalability of the Internet is at risk since a major and intensifying growth of the interdomain routing tables has been observed. Several protocols and architectures are analyzed that can be used to make interdomain routing more scalable. The most promising approach is the locator/identifier (Loc/ID) split architecture which separates routing from host identification. This way, changes in connectivity, mobility of end hosts, or traffic-engineering activities are hidden from the routing in the core of the Internet and the routing tables can be kept much smaller. All of the currently proposed Loc/ID split approaches have their downsides. In particular, the fact that most architectures use the ID for routing outside the Internet’s core is a poor design, which inhibits many of the possible features of a new routing architecture. To better understand the problems and to provide a solution for a scalable routing design that implements a true Loc/ID split, the new GLI-Split protocol is developed in this thesis, which provides separation of global and local routing and uses an ID that is independent from any routing decisions. Besides GLI-Split, several other new routing architectures implementing Loc/ID split have been proposed for the Internet. Most of them assume that a mapping system is queried for EID-to-RLOC mappings by an intermediate node at the border of an edge network. When the mapping system is queried by an intermediate node, packets are already on their way towards their destination, and therefore, the mapping system must be fast, scalable, secure, resilient, and should be able to relay packets without locators to nodes that can forward them to the correct destination. The dissertation develops a classification for all proposed mapping system architectures and shows their similarities and differences. Finally, the fast two-level mapping system FIRMS is developed. It includes security and resilience features as well as a relay service for initial packets of a flow when intermediate nodes encounter a cache miss for the EID-to-RLOC mapping. N2 - Daten durch das Internet werden heutzutage mit dem paketbasierten Internet Protokoll (IP) übertragen. Dezentralisierte Routingprotokolle innerhalb der einzelnen Netze sorgen für eine zielgerichtete Weiterleitung der einzelnen Pakete. Diese verteilten Protokolle können auch im Fehlerfall weiterarbeiten, benötigen aber mitunter sehr lange bis Daten wieder zuverlässig am Ziel ankommen. Um im Betrieb des Internets eine hohe Leistungsfähigkeit auch bei auftretenden Problemfällen zu gewährleisten, müssen die eingesetzten Protokolle optimal eingestellt werden. Zielfunktionen zur Optimierung paketbasierter Link-State Intradomain-Routingprotokolle: Ein wichtiger Faktor für die Performanz eines Netzes ist die Auswahl der administrativen Linkkosten, anhand derer die Weiterleitungsentscheidungen im Netz getroffen werden. Mit Hilfe von Modellen für Verkehrsaufkommen und für die darunterliegende Netzarchitektur kann mit geeigneten Optimierungsmethoden das Netz für verschiedene Szenarien bestmöglich eingestellt werden. Von besonderer Wichtigkeit ist hierbei die Auswahl der betrachteten Szenarien und Zielfunktionen für die Optimierung. Eine Routingkonfiguration die optimal für ein bestimmtes Ziel ist, kann beliebig schlecht für ein anderes Ziel sein. Zum Beispiel kann eine Konfiguration, die eine besonders hohe Fehlerabdeckung erreicht, zu einer sehr schlechten Verkehrsverteilung führen. Im Rahmen der Dissertation werden heuristische Optimierungen des Routings für verschiedene Protokolle und Anwendungsszenarien durchgeführt. Darüber hinaus wird eine Pareto-Optimierung implementiert, die gleichzeitig mehrere Ziele optimieren kann. Die Analysen werden zuerst für normales Routing im fehlerfreien Fall und für Fehlerszenarien durchgeführt. Daraufhin werden verschiedenste Anwendungsfälle des IP Fast-Reroute Mechanismus Loop-Free Alternates (LFA) betrachtet. Hier wird insbesondere auf die Problematik eingegangen, dass LFAs in Abhängigkeit vom eingestellten Routing in bestimmten Fehlerfällen nicht angewendet werden können. Beim Optimieren des Routings muss hier zusätzlich zur Lastverteilung auch noch die Maximierung der Fehlerabdeckung berücksichtigt werden. Schließlich folgt eine Untersuchung und Optimierung des Pre-Congestion Notification (PCN) Verfahren zur Netzzugangskontrolle und Überlaststeuerung. Hier werden verschiedene Architekturvarianten des Protokolls miteinander verglichen und Algorithmen zur Berechnung und Optimierung wichtiger Parameter des Protokolls entwickelt. Das Wachstum der Routingtabellen im Kern des Internets droht zu einem Skalierbarkeitsproblem zu werden. Ein Grund für diese Problematik ist die duale Funktion der IP-Adresse. Sie wird einerseits zur Identifikation eines Geräts benutzt und andererseits zur Weiterleitung der Daten zu diesem Gerät. Neue Mechanismen und Protokolle die eine Trennung zwischen den beiden Funktionalitäten der IP-Adresse ermöglichen sind potentielle Kandidaten für eine bessere Skalierbarkeit des Internetroutings und damit für die Erhaltung der Funktionalität des Internets. Design eines neuen Namens- und Routingprotokolls für skalierbares Interdomain-Routing: In der Dissertation werden grundlegende Eigenschaften die zu diesem Problem führen erörtert. Daraufhin werden vorhandene Ansätze zur Verbesserung der Skalierbarkeit des Internetroutings analysiert, und es werden Gemeinsamkeiten wie auch Schwachstellen identifiziert. Auf dieser Basis wird dann ein Protokoll entwickelt, das eine strikte Trennung zwischen Identifikationsadressen (IDs) und routebaren Locator-Adressen einhält. Das GLI-Split genannte Protokoll geht dabei über den einfachen Split von vorhandenen Architekturvorschlägen hinaus und führt eine weitere Adresse ein die nur für das lokale Routing innerhalb eines Endkunden-Netzes benutzt wird. Hierdurch wird die ID eines Endgeräts vollständig unabhängig vom Routing. Durch das GLI-Split Protokoll kann das globale Routing wieder skalierbar gemacht werden. Zusätzlich bietet es viele Vorteile für Netze die das Protokoll einführen, was als Anreiz nötig ist um den Einsatz eines neuen Protokolls zu motivieren. Solch ein Identifier/Locator Split Protokoll benötigt ein Mappingsystem um die Identifier der Endgeräte in routebare Locator-Adressen zu übersetzen. Im letzten Teil der Dissertation wird eine mehrstufige Mapping-Architektur namens FIRMS entwickelt. Über ein hierarchisches Verteilungssystem, das die Adressvergabestruktur der fünf Regionalen Internet Registrare (RIRs) und der darunterliegenden Lokalen Internet Registrare (LIRs) abbildet, werden die erforderlichen Zuordnungstabellen so verteilt, dass jederzeit schnell auf die benötigten Informationen zugegriffen werden kann. Hierbei wird auch besonders auf Sicherheitsaspekte geachtet. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/15 KW - Netzwerk KW - Routing KW - Optimierung KW - Netzwerkmanagement KW - Optimization KW - Future Internet Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114165 SN - 1432-8801 ER - TY - JOUR A1 - Linsenmann, Thomas A1 - März, Alexander A1 - Dufner, Vera A1 - Stetter, Christian A1 - Weiland, Judith A1 - Westermaier, Thomas T1 - Optimization of radiation settings for angiography using 3D fluoroscopy for imaging of intracranial aneurysms JF - Computer Assisted Surgery N2 - Mobile 3D fluoroscopes have become increasingly available in neurosurgical operating rooms. We recently reported its use for imaging cerebral vascular malformations and aneurysms. This study was conducted to evaluate various radiation settings for the imaging of cerebral aneurysms before and after surgical occlusion. Eighteen patients with cerebral aneurysms with the indication for surgical clipping were included in this prospective analysis. Before surgery the patients were randomized into one of three different scan protocols according (default settings of the 3D fluoroscope): Group 1: 110 kV, 80 mA (enhanced cranial mode), group 2: 120 kV, 64 mA (lumbar spine mode), group 3: 120 kV, 25 mA (head/neck settings). Prior to surgery, a rotational fluoroscopy scan (duration 24 s) was performed without contrast agent followed by another scan with 50 ml of intravenous iodine contrast agent. The image files of both scans were transferred to an Apple PowerMac(R) workstation, subtracted and reconstructed using OsiriX(R) MD 10.0 software. The procedure was repeated after clip placement. The image quality regarding preoperative aneurysm configuration and postoperative assessment of aneurysm occlusion and vessel patency was analyzed by 2 independent reviewers using a 6-grade scale. This technique quickly supplies images of adequate quality to depict intracranial aneurysms and distal vessel patency after aneurysm clipping. Regarding these features, a further optimization to our previous protocol seems possible lowering the voltage and increasing tube current. For quick intraoperative assessment, image subtraction seems not necessary. Thus, a native scan without a contrast agent is not necessary. Further optimization may be possible using a different contrast injection protocol. KW - 3D fluoroscopy KW - aneurysm KW - fluoroscopy KW - intraoperative imaging Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259251 VL - 26 IS - 1 ER - TY - CHAP A1 - Epplée, Rafael A1 - Langbehn, Eike T1 - Overlapping Architecture: Implementation of Impossible Spaces in Virtual Reality Games N2 - Natural walking in virtual reality games is constrained by the physical boundaries defined by the size of the player’s tracking space. Impossible spaces, a redirected walking technique, enlarge the virtual environment by creating overlapping architecture and letting multiple locations occupy the same physical space. Within certain thresholds, this is subtle to the player. In this paper, we present our approach to implement such impossible spaces and describe how we handled challenges like objects with simulated physics or precomputed global illumination. KW - virtual reality KW - games KW - locomotion Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246045 ER - TY - JOUR A1 - Seufert, Anika A1 - Poignée, Fabian A1 - Hoßfeld, Tobias A1 - Seufert, Michael T1 - Pandemic in the digital age: analyzing WhatsApp communication behavior before, during, and after the COVID-19 lockdown JF - Humanities and Social Sciences Communications N2 - The strict restrictions introduced by the COVID-19 lockdowns, which started from March 2020, changed people’s daily lives and habits on many different levels. In this work, we investigate the impact of the lockdown on the communication behavior in the mobile instant messaging application WhatsApp. Our evaluations are based on a large dataset of 2577 private chat histories with 25,378,093 messages from 51,973 users. The analysis of the one-to-one and group conversations confirms that the lockdown severely altered the communication in WhatsApp chats compared to pre-pandemic time ranges. In particular, we observe short-term effects, which caused an increased message frequency in the first lockdown months and a shifted communication activity during the day in March and April 2020. Moreover, we also see long-term effects of the ongoing pandemic situation until February 2021, which indicate a change of communication behavior towards more regular messaging, as well as a persisting change in activity during the day. The results of our work show that even anonymized chat histories can tell us a lot about people’s behavior and especially behavioral changes during the COVID-19 pandemic and thus are of great relevance for behavioral researchers. Furthermore, looking at the pandemic from an Internet provider perspective, these insights can be used during the next pandemic, or if the current COVID-19 situation worsens, to adapt communication networks to the changed usage behavior early on and thus avoid network congestion. KW - cultural and media studies KW - information systems and information technology KW - science, technology and society Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300261 VL - 9 ER - TY - JOUR A1 - Sîrbu, Alina A1 - Becker, Martin A1 - Caminiti, Saverio A1 - De Baets, Bernard A1 - Elen, Bart A1 - Francis, Louise A1 - Gravino, Pietro A1 - Hotho, Andreas A1 - Ingarra, Stefano A1 - Loreto, Vittorio A1 - Molino, Andrea A1 - Mueller, Juergen A1 - Peters, Jan A1 - Ricchiuti, Ferdinando A1 - Saracino, Fabio A1 - Servedio, Vito D.P. A1 - Stumme, Gerd A1 - Theunis, Jan A1 - Tria, Francesca A1 - Van den Bossche, Joris T1 - Participatory Patterns in an International Air Quality Monitoring Initiative JF - PLoS ONE N2 - The issue of sustainability is at the top of the political and societal agenda, being considered of extreme importance and urgency. Human individual action impacts the environment both locally (e.g., local air/water quality, noise disturbance) and globally (e.g., climate change, resource use). Urban environments represent a crucial example, with an increasing realization that the most effective way of producing a change is involving the citizens themselves in monitoring campaigns (a citizen science bottom-up approach). This is possible by developing novel technologies and IT infrastructures enabling large citizen participation. Here, in the wider framework of one of the first such projects, we show results from an international competition where citizens were involved in mobile air pollution monitoring using low cost sensing devices, combined with a web-based game to monitor perceived levels of pollution. Measures of shift in perceptions over the course of the campaign are provided, together with insights into participatory patterns emerging from this study. Interesting effects related to inertia and to direct involvement in measurement activities rather than indirect information exposure are also highlighted, indicating that direct involvement can enhance learning and environmental awareness. In the future, this could result in better adoption of policies towards decreasing pollution. KW - transport microenvironments KW - exposure KW - pollution KW - carbon Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151379 VL - 10 IS - 8 ER - TY - RPRT A1 - Loh, Frank A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Paving the Way for an Energy Efficient and Sustainable Future Internet of Things T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In this work, we describe the network from data collection to data processing and storage as a system based on different layers. We outline the different layers and highlight major tasks and dependencies with regard to energy consumption and energy efficiency. With this view, we can outwork challenges and questions a future system architect must answer to provide a more sustainable, green, resource friendly, and energy efficient application or system. Therefore, all system layers must be considered individually but also altogether for future IoT solutions. This requires, in particular, novel sustainability metrics in addition to current Quality of Service and Quality of Experience metrics to provide a high power, user satisfying, and sustainable network. KW - Internet of Things KW - energy efficiency KW - sustainability Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322161 ER - TY - RPRT A1 - Hasslinger, Gerhard A1 - Ntougias, Konstantinos A1 - Hasslinger, Frank A1 - Hohlfeld, Oliver T1 - Performance Analysis of Basic Web Caching Strategies (LFU, LRU, FIFO, ...) with Time-To-Live Data Validation T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Web caches often use a Time-to-live (TTL) limit to validate data consistency with web servers. We study the impact of TTL constraints on the hit ratio of basic strategies in caches of fixed size. We derive analytical results and confirm their accuracy in comparison to simulations. We propose a score-based caching method with awareness of the current TTL per data for improving the hit ratio close to the upper bound. KW - LRU KW - LFU KW - FIFO caching strategies KW - hit ratio analysis and simulation KW - TTL validation of data consistency Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322048 ER - TY - THES A1 - Binzenhöfer, Andreas T1 - Performance Analysis of Structured Overlay Networks T1 - Leistungsbewertung Strukturierter Overlay Netze N2 - Overlay networks establish logical connections between users on top of the physical network. While randomly connected overlay networks provide only a best effort service, a new generation of structured overlay systems based on Distributed Hash Tables (DHTs) was proposed by the research community. However, there is still a lack of understanding the performance of such DHTs. Additionally, those architectures are highly distributed and therefore appear as a black box to the operator. Yet an operator does not want to lose control over his system and needs to be able to continuously observe and examine its current state at runtime. This work addresses both problems and shows how the solutions can be combined into a more self-organizing overlay concept. At first, we evaluate the performance of structured overlay networks under different aspects and thereby illuminate in how far such architectures are able to support carrier-grade applications. Secondly, to enable operators to monitor and understand their deployed system in more detail, we introduce both active as well as passive methods to gather information about the current state of the overlay network. N2 - Unter einem Overlay Netz versteht man den Zusammenschluss mehrerer Komponenten zu einer logischen Topologie, die auf einer existierenden physikalischen Infrastruktur aufsetzt. Da zufällige Verbindungen zwischen den einzelnen Teilnehmern aber sehr ineffizient sind, wurden strukturierte Overlay Netze entworfen, bei denen die Beziehungen zwischen den einzelnen Teilnehmern fest vorgeschrieben sind. Solche strukturierten Mechanismen versprechen zwar ein großes Potential, dieses wurde aber noch nicht ausreichend untersucht bzw. wissenschaftlich nachgewiesen. In dieser Arbeit wird mit mathematischen Methoden und ereignisorientierter Simulation die Leistungsfähigkeit von strukturierten Overlay Netzen untersucht. Da diese stark von der aktuellen Situation im Overlay abhängt, entwickeln wir Methoden, mit denen sich sowohl passiv, als auch aktiv, wichtige Systemparameter zur Laufzeit abschätzen bzw. messen lassen. Zusammen führen die vorgeschlagenen Methoden zu selbstorganisierenden Mechanismen, die den aktuellen Zustand des Overlays überwachen, diesen bewerten und sich gegebenenfalls automatisch an die aktuellen Verhältnisse anpassen T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/08 KW - Overlay-Netz KW - Leistungsbewertung KW - Peer-to-Peer-Netz KW - Mathematisches Modell KW - Chord KW - Kademlia KW - DHT KW - Overlay KW - Chord KW - Kademlia KW - DHT Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-26291 ER - TY - THES A1 - Oechsner, Simon T1 - Performance Challenges and Optimization Potential of Peer-to-Peer Overlay Technologies T1 - Leistungsanforderungen und Optimierungspotential von Peer-to-Peer Overlay-Technologien N2 - In today's Internet, building overlay structures to provide a service is becoming more and more common. This approach allows for the utilization of client resources, thus being more scalable than a client-server model in this respect. However, in these architectures the quality of the provided service depends on the clients and is therefore more complex to manage. Resource utilization, both at the clients themselves and in the underlying network, determine the efficiency of the overlay application. Here, a trade-off exists between the resource providers and the end users that can be tuned via overlay mechanisms. Thus, resource management and traffic management is always quality-of-service management as well. In this monograph, the three currently significant and most widely used overlay types in the Internet are considered. These overlays are implemented in popular applications which only recently have gained importance. Thus, these overlay networks still face real-world technical challenges which are of high practical relevance. We identify the specific issues for each of the considered overlays, and show how their optimization affects the trade-offs between resource efficiency and service quality. Thus, we supply new insights and system knowledge that is not provided by previous work. N2 - Im heutigen Internet werden immer häufiger Overlay-Strukturen aufgebaut, um eine Dienstleistung zu erbringen. Dieser Ansatz ermöglicht die Nutzung von Client-Ressourcen, so dass er in dieser Hinsicht besser skaliert als das Client-Server-Modell. Die Qualität des zur Verfügung gestellten Dienstes hängt nun aber von den Clients ab und ist daher komplizierter zu steuern. Die Ressourcennutzung, sowohl auf den Clients selbst als auch in dem zugrunde liegenden Netzwerk, bestimmt die Effizienz der Overlay-Anwendung. Hier existiert ein Trade-off zwischen Ressourcen-Anbietern und Endkunden, der über Overlay-Mechanismen geregelt werden kann. Daher ist Ressourcenmanagement und Traffic-Management gleichzeitig immer auch Quality-of-Service-Management. In dieser Arbeit werden die drei derzeit am weitesten im Internet verbreiteten und signifikanten Overlay-Typen berücksichtigt. Diese Overlays sind in populären Anwendungen, die erst vor kurzem an Bedeutung gewonnen haben, implementiert. Daher sind diese Overlay-Netze nach wie vor realen technischen Herausforderungen ausgesetzt, die von hoher praktischer Relevanz sind. Die spezifischen Herausforderungen für jedes der betrachteten Overlays werden identifiziert und es wird gezeigt, wie deren Optimierung den Trade-off zwischen Ressourceneffizienz und Service-Qualität beeinflusst. So werden neue Einsichten und Erkenntnisse über diese Systeme gewonnen, die in früheren Arbeiten nicht existieren. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/10 KW - Overlay-Netz KW - Peer-to-Peer-Netz KW - Leistungsbewertung KW - Overlays KW - Peer-to-Peer KW - Performance Evaluation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50015 ER - TY - THES A1 - Lehrieder, Frank T1 - Performance Evaluation and Optimization of Content Distribution using Overlay Networks T1 - Leistungsbewertung und Optimierung von Overlay Netzwerken zum Verteilen großer Datenmengen N2 - The work presents a performance evaluation and optimization of so-called overlay networks for content distribution in the Internet. Chapter 1 describes the importance which have such networks in today's Internet, for example, for the transmission of video content. The focus of this work is on overlay networks based on the peer-to-peer principle. These are characterized by the fact that users who download content, also contribute to the distribution process by sharing parts of the data to other users. This enables efficient content distribution because each user not only consumes resources in the system, but also provides its own resources. Chapter 2 of the monograph contains a detailed description of the functionality of today's most popular overlay network BitTorrent. It explains the various components and their interaction. This is followed by an illustration of why such overlay networks for Internet service providers (ISPs) are problematic. The reason lies in the large amount of inter-ISP traffic that is produced by these overlay networks. Since this inter-ISP traffic leads to high costs for ISPs, they try to reduce it by improved mechanisms for overlay networks. One optimization approach is the use of topology awareness within the overlay networks. It provides users of the overlay networks with information about the underlying physical network topology. This allows them to avoid inter-ISP traffic by exchanging data preferrentially with other users that are connected to the same ISP. Another approach to save inter-ISP traffic is caching. In this case the ISP provides additional computers in its network, called caches, which store copies of popular content. The users of this ISP can then obtain such content from the cache. This prevents that the content must be retrieved from locations outside of the ISP's network, and saves costly inter-ISP traffic in this way. In the third chapter of the thesis, the results of a comprehensive measurement study of overlay networks, which can be found in today's Internet, are presented. After a short description of the measurement methodology, the results of the measurements are described. These results contain data on a variety of characteristics of current P2P overlay networks in the Internet. These include the popularity of content, i.e., how many users are interested in specific content, the evolution of the popularity and the size of the files. The distribution of users within the Internet is investigated in detail. Special attention is given to the number of users that exchange a particular file within the same ISP. On the basis of these measurement results, an estimation of the traffic savings that can achieved by topology awareness is derived. This new estimation is of scientific and practical importance, since it is not limited to individual ISPs and files, but considers the whole Internet and the total amount of data exchanged in overlay networks. Finally, the characteristics of regional content are considered, in which the popularity is limited to certain parts of the Internet. This is for example the case of videos in German, Italian or French language. Chapter 4 of the thesis is devoted to the optimization of overlay networks for content distribution through caching. It presents a deterministic flow model that describes the influence of caches. On the basis of this model, it derives an estimate of the inter-ISP traffic that is generated by an overlay network, and which part can be saved by caches. The results show that the influence of the cache depends on the structure of the overlay networks, and that caches can also lead to an increase in inter-ISP traffic under certain circumstances. The described model is thus an important tool for ISPs to decide for which overlay networks caches are useful and to dimension them. Chapter 5 summarizes the content of the work and emphasizes the importance of the findings. In addition, it explains how the findings can be applied to the optimization of future overlay networks. Special attention is given to the growing importance of video-on-demand and real-time video transmissions. N2 - Die Arbeit beschäftigt sich mit der Leistungsbewertung und Optimierung von sogenannten Overlay-Netzwerken zum Verteilen von großen Datenmengen im Internet. Im Kapitel 1 der Arbeit wird die große Bedeutung erläutert, die solche Netzwerke im heutigen Internet haben, beispielsweise für die Übertragung von Video-Inhalten. Im Fokus der Arbeit liegen Overlay-Netzwerke, die auf dem Peer-to-peer Prinzip basieren. Diese zeichnen sich dadurch aus, dass Nutzer, die Inhalte herunterladen, auch gleichzeitig an dem Verteilprozess teilnehmen, indem sie Teile der Daten an andere Nutzer weitergeben. Dies ermöglicht eine effiziente Verteilung der Daten, weil jeder Nutzer nicht nur Ressourcen im System belegt, sondern auch eigene Ressourcen einbringt. Kapitel 2 der Arbeit enthält eine detaillierte Beschreibung der Funktionsweise des heute populärsten Overlay-Netzwerks BitTorrent. Es werden die einzelnen Komponenten erläutert und deren Zusammenspiel erklärt. Darauf folgt eine Darstellung, warum solche Overlay-Netzwerke für Internet-Anbieter (Internet service provider, ISP) problematisch sind. Der Grund dafür liegt in der großen Menge an Inter-ISP Verkehr, den diese Overlays erzeugen. Da solcher Inter-ISP Verkehr zu hohen Kosten für ISPs führt, versuchen diese den Inter-ISP Verkehr zu reduzieren, indem sie die Mechanismen der Overlay-Netzwerke optimieren. Ein Ansatz zur Optimierung ist die Verwendung von Topologiebewusstsein innerhalb der Overlay-Netzwerke. Dabei erhalten die Nutzer der Overlay-Netzwerke Informationen über die zugrunde liegende, physikalische Netzwerktopologie. Diese ermöglichen es ihnen, Inter-ISP Verkehr zu vermeiden, indem sie Daten bevorzugt mit anderen Nutzern austauschen, die mit dem gleichen ISP verbunden sind. Ein weiterer Ansatz, um Inter-ISP Verkehr einzusparen, ist Caching. Dabei stellt der ISP zusätzliche Rechner, sogenannte Caches, in seinem Netzwerk zur Verfügung, die Kopien populärer Inhalte zwischenspeichern. Die Nutzer dieses ISP können solche Inhalte nun von den Caches beziehen. Dies verhindert, dass populäre Inhalte mehrfach von außerhalb des betrachteten ISPs bezogen werden müssen, und spart so kostenintensiven Inter-ISP Verkehr ein. Im dritten Kapitel der Arbeit werden Ergebnisse einer umfassenden Messung von Overlay-Netzwerken vorgestellt, wie sie heute im Internet anzutreffen sind. Nach einer kurzen Darstellung der bei der Messung verwendeten Methodik werden die Resultate der Messungen beschrieben. Diese Ergebnisse enthalten Daten über eine Vielzahl von Eigenschaften von heutigen P2P-basierten Overlay-Netzwerken im Internet. Dazu zählen die Popularität von Inhalten, d.h., wie viele Nutzer an bestimmten Inhalten interessiert sind, die zeitliche Entwicklung der Popularität und die Größe der Daten. Im Detail wird auch die Verteilung der Nutzer über das Internet analysiert. Ein besonderes Augenmerk liegt dabei auf der Anzahl der Nutzer, die gleichzeitig und im Netz desselben ISP eine bestimmte Datei tauschen. Auf der Basis dieser Messergebnisse wird eine Abschätzung durchgeführt, welches Einsparpotential die Optimierung von Overlay-Netzwerken durch Topologiebewusstsein bietet. Diese neuartige Abschätzung ist von wissenschaftlicher und praktischer Bedeutung, da sie sich nicht auf einzelne ISPs und Dateien beschränkt, sondern des gesamte Internet und die Menge aller in Overlay-Netzwerken verfügbaren Dateien umfasst. Schließlich werden die Besonderheiten von regionalen Inhalten betrachtet, bei denen sich die Popularität auf bestimmte Teile des Internets beschränkt. Dies ist beispielsweise bei Videos in deutscher, italienischer oder französischer Sprache der Fall. Kapitel 4 der Arbeit widmet sich der Optimierung von Overlay-Netzwerken zum Verteilen großer Datenmengen durch Caching. Es wird ein deterministisches Flussmodel entwickelt, das den Einfluss von Caches beschreibt. Auf der Basis dieses Modells leitet er eine Abschätzung des Inter-ISP Verkehrs ab, der von einem Overlay-Netzwerk erzeugt wird, und welcher Teil davon durch Caches eingespart werden kann. Die Ergebnisse zeigen, dass der Einfluss von Caches von der Struktur der Overlay-Netzwerke abhängt und dass Caches unter bestimmten Umständen auch zu einem erhöhten Inter-ISP Verkehr führen können. Das beschriebene Modell ist somit ein wichtiges Hilfsmittel für ISPs um zu entscheiden, für welche Overlay-Netzwerke Caches sinnvoll sind, und um diese anschließend richtig zu dimensionieren. Kapitel 5 fasst den Inhalt der Arbeit zusammen und stellt die Bedeutung der gewonnenen Erkenntnisse heraus. Abschließend wird erläutert, in welcher Weise die in der Arbeit beschriebenen Ergebnisse wichtige Grundlagen für die Optimierung von zukünftigen Overlay-Netzwerken darstellen werden. Dabei wird besonders auf die wachsende Bedeutung von Video-On-Demand und Echt-Zeit Video-Übertragungen eingegangen. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/13 KW - Leistungsbewertung KW - Verteiltes System KW - Overlay-Netz KW - Overlay Netzwerke KW - Overlay networks Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76018 ER - TY - THES A1 - Milbrandt, Jens T1 - Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks T1 - Effiziente Konzepte und Leistungsbewertung zum Ressourcen Management in zukünftigen IP Netzen N2 - Next generation networks (NGNs) must integrate the services of current circuit-switched telephone networks and packet-switched data networks. This convergence towards a unified communication infrastructure necessitates from the high capital expenditures (CAPEX) and operational expenditures (OPEX) due to the coexistence of separate networks for voice and data. In the end, NGNs must offer the same services as these legacy networks and, therefore, they must provide a low-cost packet-switched solution with real-time transport capabilities for telephony and multimedia applications. In addition, NGNs must be fault-tolerant to guarantee user satisfaction and to support business-critical processes also in case of network failures. A key technology for the operation of NGNs is the Internet Protocol (IP) which evolved to a common and well accepted standard for networking in the Internet during the last 25 years. There are two basically different approaches to achieve QoS in IP networks. With capacity overprovisioning (CO), an IP network is equipped with sufficient bandwidth such that network congestion becomes very unlikely and QoS is maintained most of the time. The second option to achieve QoS in IP networks is admission control (AC). AC represents a network-inherent intelligence that admits real-time traffic flows to a single link or an entire network only if enough resources are available such that the requirements on packet loss and delay can be met. Otherwise, the request of a new flow is blocked. This work focuses on resource management and control mechanisms for NGNs, in particular on AC and associated bandwidth allocation methods. The first contribution consists of a new link-oriented AC method called experience-based admission control (EBAC) which is a hybrid approach dealing with the problems inherent to conventional AC mechanisms like parameter-based or measurement-based AC (PBAC/MBAC). PBAC provides good QoS but suffers from poor resource utilization and, vice versa, MBAC uses resources efficiently but is susceptible to QoS violations. Hence, EBAC aims at increasing the resource efficiency while maintaining the QoS which increases the revenues of ISPs and postpones their CAPEX for infrastructure upgrades. To show the advantages of EBAC, we first review today’s AC approaches and then develop the concept of EBAC. EBAC is a simple mechanism that safely overbooks the capacity of a single link to increase its resource utilization. We evaluate the performance of EBAC by its simulation under various traffic conditions. The second contribution concerns dynamic resource allocation in transport networks which implement a specific network admission control (NAC) architecture. In general, the performance of different NAC systems may be evaluated by conventional methods such as call blocking analysis which has often been applied in the context of multi-service asynchronous transfer mode (ATM) networks. However, to yield more practical results than abstract blocking probabilities, we propose a new method to compare different AC approaches by their respective bandwidth requirements. To present our new method for comparing different AC systems, we first give an overview of network resource management (NRM) in general. Then we present the concept of adaptive bandwidth allocation (ABA) in capacity tunnels and illustrate the analytical performance evaluation framework to compare different AC systems by their capacity requirements. Different network characteristics influence the performance of ABA. Therefore, the impact of various traffic demand models and tunnel implementations, and the influence of resilience requirements is investigated. In conclusion, the resources in NGNs must be exclusively dedicated to admitted traffic to guarantee QoS. For that purpose, robust and efficient concepts for NRM are required to control the requested bandwidth with regard to the available transmission capacity. Sophisticated AC will be a key function for NRM in NGNs and, therefore, efficient resource management concepts like experience-based admission control and adaptive bandwidth allocation for admission-controlled capacity tunnels, as presented in this work are appealing for NGN solutions. N2 - In meiner Dissertation zum Thema “Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks” werden im Wesentlichen zwei miteinander verwobene Konzepte zur effizienten Nutzung von Übertragungsressourcen in zukünftigen IP Netzen untersucht. Das Management solcher Ressourcen ist zur Unterstützung qualitativ hochwertiger Netzdiensten (z.B. IP Telephonie, IP TV, etc.) in Zukunft unabdingbar. Gegenwärtig werden diese Dienste durch den Einsatz hoher Übertragungskapazitäten (engl. capacity overprovisioning) in den IP Breitbandnetzen ermöglicht. Um in Spitzenlastzeiten die Qualität der Dienste aufrecht zu erhalten, sind die Bandbreiten derart hoch angesetzt, dass unter normalen Umständen die Ressourcen nur sehr schwach ausgelastet sind (im Bereich zwischen 10 und 30 Prozent). Diese Überdimensionierungslösung ist einfach zu realisieren aber auch sehr kostenintensiv, ineffizient und vor allem nicht (zukunfts-)sicher, da bei ständig steigendem Bandbreitenbedarf, die Netzkapazitäten häufig angepasst werden müssen. Eine Effizienzsteigerung bei der Ressourcennutzung in heutigen Kommunikationsnetzen ist daher ein wichtiges Kriterium für die Wirtschaftlichkeit zukünftiger IP Netze. Erreicht werden kann dies mit den Mitteln der Netzzugangskontrolle (engl. admission control, kurz AC), welche bereits in verschiedenen Formen entwickelt, untersucht und teilweise auch in heutigen IP Netzen realisiert ist. Die AC stellt eine vergleichsweise komplexe Lösung zur Aufrechterhaltung der Dienstgüte in IP Netzen dar. Daher sind einfache und effiziente Mechanismen/Automatismen zur Durchführung der AC gefordert, um deren Einsatz an Stelle der Überdimensionierung zu rechtfertigen. Den zuvor genannten Forderungen nach effizienter Ressourcennutzung entsprechend stellt der erste Hauptbeitrag der Dissertation einen neuen Ansatz zur AC dar, die so genannte erfahrungsbasierte Netzzugangskontrolle (engl. experience-based admission control, kurz EBAC). Gegenüber den existierenden alternativen, d.h. parameter- oder mess-basierten Verfahren der AC zeichnet sich die EBAC durch effiziente Ressourcennutzung und begünstigt gleichzeitig die Aufrechterhaltung der Dienstgüte. Die genaue Funktionsweise der EBAC und die simulative Leistungsuntersuchung sind in der Dissertation nachzulesen. Der zweite Themenschwerpunkt der Dissertation greift eine tunnel-basierte Netzarchitektur auf und präsentiert mit deren Hilfe eine neue Methode zur Bewertung verschiedener Bandbreitenallokationsstrategien in Kombination mit AC. Die neue Bewertungsmethode wird zwar anhand einer speziellen tunnel-basierten AC untersucht, lässt sich aber auf alle Arten so genannter budget-basierter AC anwenden. Bei der konventionellen Leistungsbewertung verschiedener AC-Systeme dienen abstrakte Blockierungswahrscheinlichkeiten als Leistungsmaß. Im Gegensatz hierzu, bewertet die neue Methode die Leistung eines AC-Systems anhand des zugehörigen Bandbreitenbedarfs in Abhängigkeit verschiedener Einflussfaktoren, z.B. der avisierten Blockierwahrscheinlichkeit des AC-Systems, der Verkehrszusammensetzung, des Verkehrsvolumens, der Verkehrsdynamik und vor allem der angewandten Bandbreitenallokationsstrategie. In zukünftigen IP Netzen müssen die Ressourcen zur Datenübertragung besser verwaltet und kontrolliert werden. Zugelassener Verkehr mit hohen Dienstgüteanforderungen muss exklusiv Bandbreite zugewiesen werden, um die geforderte Dienstgüte garantieren zu können. Um dieses Ziel zu erreichen werden robuste und effiziente Konzepte zum Management von Netzressourcen benötigt. Intelligenter Netzzugangskontrolle wird eine Schlüsselfunktion in zukünftigen IP Netzen zukommen. Die in dieser Dissertation vorgestellten, effizienten Ressourcenmanagementkonzepte „erfahrungsbasierte Netzzugangskontrolle“ und „adaptive Bandbreitenallokation in zugangskontrollierten Kapazitätstunnel“ tragen zum Erreichen dieses Ziels bei. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/07 KW - Ressourcenmanagement KW - Leistungsbewertung KW - Rechnernetz KW - IP KW - Ressourcen Management KW - Leistungsbewertung KW - zukünftige Kommunikationsnetze KW - Resource Management KW - Performance Analysis KW - Next Generation Networks Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23332 ER - TY - THES A1 - Hoßfeld, Tobias T1 - Performance Evaluation of Future Internet Applications and Emerging User Behavior T1 - Leistungsbewertung von zukünftigen Internet-Applikationen und auftretenden Nutzerverhaltens N2 - In future telecommunication systems, we observe an increasing diversity of access networks. The separation of transport services and applications or services leads to multi-network services, i.e., a future service has to work transparently to the underlying network infrastructure. Multi-network services with edge-based intelligence, like P2P file sharing or the Skype VoIP service, impose new traffic control paradigms on the future Internet. Such services adapt the amount of consumed bandwidth to reach different goals. A selfish behavior tries to keep the QoE of a single user above a certain level. Skype, for instance, repeats voice samples depending on the perceived end-to-end loss. From the viewpoint of a single user, the replication of voice data overcomes the degradation caused by packet loss and enables to maintain a certain QoE. The cost for this achievement is a higher amount of consumed bandwidth. However, if the packet loss is caused by congestion in the network, this additionally required bandwidth even worsens the network situation. Altruistic behavior, on the other side, would reduce the bandwidth consumption in such a way that the pressure on the network is released and thus the overall network performance is improved. In this monograph, we analyzed the impact of the overlay, P2P, and QoE paradigms in future Internet applications and the interactions from the observing user behavior. The shift of intelligence toward the edge is accompanied by a change in the emerging user behavior and traffic profile, as well as a change from multi-service networks to multi-networks services. In addition, edge-based intelligence may lead to a higher dynamics in the network topology, since the applications are often controlled by an overlay network, which can rapidly change in size and structure as new nodes can leave or join the overlay network in an entirely distributed manner. As a result, we found that the performance evaluation of such services provides new challenges, since novel key performance factors have to be first identified, like pollution of P2P systems, and appropriate models of the emerging user behavior are required, e.g. taking into account user impatience. As common denominator of the presented studies in this work, we focus on a user-centric view when evaluating the performance of future Internet applications. For a subscriber of a certain application or service, the perceived quality expressed as QoE will be the major criterion of the user's satisfaction with the network and service providers. We selected three different case studies and characterized the application's performance from the end user's point of view. Those are (1) cooperation in mobile P2P file sharing networks, (2) modeling of online TV recording services, and (3) QoE of edge-based VoIP applications. The user-centric approach facilitates the development of new mechanisms to overcome problems arising from the changing user behavior. An example is the proposed CycPriM cooperation strategy, which copes with selfish user behavior in mobile P2P file sharing system. An adequate mechanism has also been shown to be efficient in a heterogeneous B3G network with mobile users conducting vertical handovers between different wireless access technologies. The consideration of the user behavior and the user perceived quality guides to an appropriate modeling of future Internet applications. In the case of the online TV recording service, this enables the comparison between different technical realizations of the system, e.g. using server clusters or P2P technology, to properly dimension the installed network elements and to assess the costs for service providers. Technologies like P2P help to overcome phenomena like flash crowds and improve scalability compared to server clusters, which may get overloaded in such situations. Nevertheless, P2P technology invokes additional challenges and different user behavior to that seen in traditional client/server systems. Beside the willingness to share files and the churn of users, peers may be malicious and offer fake contents to disturb the data dissemination. Finally, the understanding and the quantification of QoE with respect to QoS degradations permits designing sophisticated edge-based applications. To this end, we identified and formulated the IQX hypothesis as an exponential interdependency between QoE and QoS parameters, which we validated for different examples. The appropriate modeling of the emerging user behavior taking into account the user's perceived quality and its interactions with the overlay and P2P paradigm will finally help to design future Internet applications. N2 - Applikationen im heutigen Internet werden immer mehr durch intelligente Endknoten bereitgestellt, deren Kommunikation in logischen, virtuellen Netzwerken, (Overlays) realisiert wird. Die verstärkte Diensterbringung durch solche Overlays, wie zum Beispiel bei Peer-to-Peer Dateitauschbörsen oder Telefonie über das Internet, wird durch einen Paradigmenwechsel von Multi-Service Networks zu Multi-Network Services beschrieben. Während in einem Multi-Service Network verschiedene Dienste innerhalb eines Netzes angeboten werden, beschreibt ein Multi-Network Service die Diensterbringung über verschiedene Netze und Netzzugangstechnologien, wie es im Internet der Fall ist. Dadurch kann die technische Güte des Telekommunikationsdienstes (Quality of Service, QoS) nicht mehr die alleinige Metrik für die Qualität eines Dienstes sein. Stattdessen ist die vom Nutzer erfahrene Dienstgüte (User Perceived Quality of Experience, QoE) zu betrachten. Diese QoE muss entsprechend modelliert werden, um die Performanz von heutigen oder auch zukünftigen Internetapplikationen zu beurteilen. Die Berücksichtigung der QoE beinhaltet unter anderem auch neuartige Verhaltensweisen der Teilnehmer, die ebenfalls modelliert werden müssen. Ein Beispiel ist der Dienstabbruch durch ungeduldige Nutzer beim Herunterladen von Filmen oder bei nicht ausreichender Qualität bei Internet-Telefonie. Durch die Verschiebung der Intelligenz von Applikationen in Richtung Endknoten entstehen neu aufkommende Verhaltensweisen der Teilnehmer und sich ändernde Charakteristika des Netzwerkverkehrs, die sie von klassischen Client-Server-Anwendungen unterscheiden. Beispiele hierfür sind egoistisches oder altruistisches Nutzerverhalten bei der Einbringung von Endnutzer-Ressourcen zur Diensterbringung oder auch bösartiges Nutzerverhalten bei der gezielten Störung eines Dienstes (Pollution). In beiden Fällen sind die zeitdynamischen Verhaltensmuster (Churn, Flash Crowds) zu berücksichtigen. Um die ausgedehnten Overlay. Netze zu planen und zu evaluieren, sind überdies auch neue Leistungsbewertungsmodelle notwendig, damit zum Beispiel die Simulation skaliert oder aber auch zeitdynamische Nutzerverhalten in analytischen Modellen abgebildet wird. Diese Doktorarbeit arbeitet diese Aspekte an drei Anwendungsbeispielen auf: Verteilernetz für Dateiinhalte (Content Distribution Network), Netzwerk-basierte Videorekorder (Online TV Recorder) und Sprachtelefonie über P2P (VoP2P). Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Anwendungsbeispiele. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/09 KW - Leistungsbewertung KW - Peer-to-Peer-Netz KW - Dienstgüte KW - Overlay-Netz KW - Mathematische Modellierung KW - BitTorrent KW - Skype KW - Warteschlangentheorie KW - zukünftiges Internet KW - vom Nutzer erfahrene Dienstgüte QoE KW - Multi-Netzwerk Dienste KW - intelligente Applikationen KW - Verteilung von Inhalten KW - Future Internet KW - Quality of Experience QoE KW - Multi-Network Service KW - Edge-based Intelligence KW - Content Distribution Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-37570 ER - TY - JOUR A1 - Hirth, Matthias A1 - Seufert, Michael A1 - Lange, Stanislav A1 - Meixner, Markus A1 - Tran-Gia, Phuoc T1 - Performance evaluation of hybrid crowdsensing and fixed sensor systems for event detection in urban environments JF - Sensors N2 - Crowdsensing offers a cost-effective way to collect large amounts of environmental sensor data; however, the spatial distribution of crowdsensing sensors can hardly be influenced, as the participants carry the sensors, and, additionally, the quality of the crowdsensed data can vary significantly. Hybrid systems that use mobile users in conjunction with fixed sensors might help to overcome these limitations, as such systems allow assessing the quality of the submitted crowdsensed data and provide sensor values where no crowdsensing data are typically available. In this work, we first used a simulation study to analyze a simple crowdsensing system concerning the detection performance of spatial events to highlight the potential and limitations of a pure crowdsourcing system. The results indicate that even if only a small share of inhabitants participate in crowdsensing, events that have locations correlated with the population density can be easily and quickly detected using such a system. On the contrary, events with uniformly randomly distributed locations are much harder to detect using a simple crowdsensing-based approach. A second evaluation shows that hybrid systems improve the detection probability and time. Finally, we illustrate how to compute the minimum number of fixed sensors for the given detection time thresholds in our exemplary scenario. KW - crowdsensing KW - event detection KW - detection time simulation KW - performance analysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245245 SN - 1424-8220 VL - 21 IS - 17 ER - TY - THES A1 - Geißler, Stefan T1 - Performance Evaluation of Next-Generation Data Plane Architectures and their Components T1 - Leistungsbewertung von Data Plane Architekturen der Nächsten Generation sowie ihrer Einzelkomponenten N2 - In this doctoral thesis we cover the performance evaluation of next generation data plane architectures, comprised of complex software as well as programmable hardware components that allow fine granular configuration. In the scope of the thesis we propose mechanisms to monitor the performance of singular components and model key performance indicators of software based packet processing solutions. We present novel approaches towards network abstraction that allow the integration of heterogeneous data plane technologies into a singular network while maintaining total transparency between control and data plane. Finally, we investigate a full, complex system consisting of multiple software-based solutions and perform a detailed performance analysis. We employ simulative approaches to investigate overload control mechanisms that allow efficient operation under adversary conditions. The contributions of this work build the foundation for future research in the areas of network softwarization and network function virtualization. N2 - Diese Doktorarbeit behandelt die Leistungsbewertung von Data Plane Architekturen der nächsten Generation, die aus komplexen Softwarelösungen sowie programmierbaren Hardwarekomponenten bestehen. Hierbei werden Mechanismen entwickelt, die es ermöglichen, die Leistungsfähigkeit einzelner Komponenten zu messen und zentrale Leistungsindikatoren softwarebasierter Systeme zur Verarbeitung von Datenpaketen zu modellieren. Es werden neuartige Ansätze zur Netzabstraktion entworfen, die eine vollständig transparente Integration heterogener Technologien im selben Netz ermöglichen. Schließlich wird eine umfassende Leistungsbewertung eines komplexen Systems, das aus einer Vielzahl softwarebasierter Netzfunktionen besteht, durchgeführt. Anhand simulativer Modelle werden Überlastkontrollmechanismen entwickelt, die es dem System erlauben auch unter Überlast effizient zu arbeiten. Die Beiträge dieser Arbeit bilden die Grundlage weiterer Forschungen im Bereich der Softwarisierung von Netzen sowie der Virtualisierung von Netzfunktionen. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/21 KW - Leistungsbewertung KW - Simulation KW - Zeitdiskretes System KW - Implementierung KW - performance evaluation KW - simulation KW - discrete-time analysis KW - network softwarization KW - mobile networks Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260157 SN - 1432-8801 ER - TY - THES A1 - Henjes, Robert T1 - Performance Evaluation of Publish/Subscribe Middleware Architectures T1 - Leistungsuntersuchung von Publish/Subscribe Middleware Architekturen N2 - While developing modern applications, it is necessary to ensure an efficient and performant communication between different applications. In current environments, a middleware software is used, which supports the publish/subscribe communication pattern. Using this communication pattern, a publisher sends information encapsulated in messages to the middleware. A subscriber registers its interests at the middleware. The monograph describes three different steps to determine the performance of such a system. In a first step, the message throughput performance of a publish/subscribe in different scenarios is measured using a Java Message Service (JMS) based implementation. In the second step the maximum achievable message throughput is described by adapted models depending on the filter complexity and the replication grade. Using the model, the performance characteristics of a specific system in a given scenario can be determined. These numbers are used for the queuing model described in the third part of the thesis, which supports the dimensioning of a system in realistic scenarios. Additionally, we introduce a method to approximate an M/G/1 system numerically in an efficient way, which can be used for real time analysis to predict the expected performance in a certain scenario. Finally, the analytical model is used to investigate different possibilities to ensure the scalability of the maximum achievable message throughput of the overall system. N2 - Bei der Entwicklung moderner Applikationen ist es notwendig eine effiziente und performante Kommunikation zwischen den einzelnen Anwendungen sicherzustellen. In der Praxis kommt dabei eine Middleware Software zum Einsatz, die das Publish/Subscribe Kommunikationsmuster unterstützt. Dabei senden Publisher Informationen in Form von Nachrichten an die Middleware. Die Subscriber hingegen zeigen durch die Nutzung von Filtern der Middleware an, welche Informationen zugestellt werden sollen. Die Arbeit beschreibt ein dreistufiges Verfahren zur Leistungsbestimmung eines solchen Systems. Zunächst wird durch Messung die Leistung von Publish/Subscribe Systemen in verschiedenen Szenarien untersucht am Beispiel von Java Message Service (JMS) basierten Implementierungen. Danach wird der maximale Nachrichtendurchsatz in Abhängigkeit der Filterkomplexität und des Nachrichtenreplikationsgrades durch einfache Modelle beschrieben. Damit können die Leistungskennwerte für ein System und vorgegebenen Randbedingungen beschrieben werden. Im dritten Teil wird mittels Leistungsbewertung und durch Anwendung eines Warteschlangenmodells die Leistung in praxisnahen Umfeld beschrieben, so dass eine Dimensionierung möglich wird. Zusätzlich wird ein mathematisch, approximatives Verfahren vorgestellt, um ein M/G/1 System numerisch effizient berechnen zu können, was bei der Echtzeitbewertung eines Systems zur Leistungsvorhersage benutzt werden kann. Des Weiteren werden mittels des Modells Möglichkeiten untersucht die Skalierbarkeit des Gesamtsystems in Bezug auf den Nachrichtendurchsatz sicherzustellen. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 04/10 KW - Middleware KW - Publish-Subscribe-System KW - Java Message Service KW - Leistungsbewertung KW - Middleware KW - Publish-Subscribe-System KW - Java Message Service KW - Performance Evaluation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53388 ER - TY - THES A1 - Klein, Alexander T1 - Performance Issues of MAC and Routing Protocols in Wireless Sensor Networks T1 - Leistungsbeschränkende Faktoren von MAC und Routingprotokollen in drahtlosen Sensornetzen N2 - The focus of this work lies on the communication issues of Medium Access Control (MAC) and routing protocols in the context of WSNs. The communication challenges in these networks mainly result from high node density, low bandwidth, low energy constraints and the hardware limitations in terms of memory, computational power and sensing capabilities of low-power transceivers. For this reason, the structure of WSNs is always kept as simple as possible to minimize the impact of communication issues. Thus, the majority of WSNs apply a simple one hop star topology since multi-hop communication has high demands on the routing protocol since it increases the bandwidth requirements of the network. Moreover, medium access becomes a challenging problem due to the fact that low-power transceivers are very limited in their sensing capabilities. The first contribution is represented by the Backoff Preamble-based MAC Protocol with Sequential Contention Resolution (BPS-MAC) which is designed to overcome the limitations of low-power transceivers. Two communication issues, namely the Clear Channel Assessment (CCA) delay and the turnaround time, are directly addressed by the protocol. The CCA delay represents the period of time which is required by the transceiver to detect a busy radio channel while the turnaround time specifies the period of time which is required to switch between receive and transmit mode. Standard Carrier Sense Multiple Access (CSMA) protocols do not achieve high performance in terms of packet loss if the traffic is highly correlated due to the fact that the transceiver is not able to sense the medium during the switching phase. Therefore, a node may start to transmit data while another node is already transmitting since it has sensed an idle medium right before it started to switch its transceiver from receive to transmit mode. The BPS-MAC protocol uses a new sequential preamble-based medium access strategy which can be adapted to the hardware capabilities of the transceivers. The protocol achieves a very low packet loss rate even in wireless networks with high node density and event-driven traffic without the need of synchronization. This makes the protocol attractive to applications such as structural health monitoring, where event suppression is not an option. Moreover, acknowledgments or complex retransmission strategies become almost unnecessary since the sequential preamble-based contention resolution mechanism minimizes the collision probability. However, packets can still be lost as a consequence of interference or other issues which affect signal propagation. The second contribution consists of a new routing protocol which is able to quickly detect topology changes without generating a large amount of overhead. The key characteristics of the Statistic-Based Routing (SBR) protocol are high end-to-end reliability (in fixed and mobile networks), load balancing capabilities, a smooth continuous routing metric, quick adaptation to changing network conditions, low processing and memory requirements, low overhead, support of unidirectional links and simplicity. The protocol can establish routes in a hybrid or a proactive mode and uses an adaptive continuous routing metric which makes it very flexible in terms of scalability while maintaining stable routes. The hybrid mode is optimized for low-power WSNs since routes are only established on demand. The difference of the hybrid mode to reactive routing strategies is that routing messages are periodically transmitted to maintain already established routes. However, the protocol stops the transmission of routing messages if no data packets are transmitted for a certain time period in order to minimize the routing overhead and the energy consumption. The proactive mode is designed for high data rate networks which have less energy constraints. In this mode, the protocol periodically transmits routing messages to establish routes in a proactive way even in the absence of data traffic. Thus, nodes in the network can immediately transmit data since the route to the destination is already established in advance. In addition, a new delay-based routing message forwarding strategy is introduced. The forwarding strategy is part of SBR but can also be applied to many routing protocols in order to modify the established topology. The strategy can be used, e.g. in mobile networks, to decrease the packet loss by deferring routing messages with respect to the neighbor change rate. Thus, nodes with a stable neighborhood forward messages faster than nodes within a fast changing neighborhood. As a result, routes are established through nodes with correlated movement which results in fewer topology changes due to higher link durations. N2 - Im Rahmen dieser Arbeit werden leistungsbeschränkende Faktoren von Medium Access Control (MAC) und Routingprotokollen im Kontext von drahtlosen Sensornetzen untersucht. Zunächst werden typische Probleme des Funkkanals diskutiert. Anschließend führen eine Einteilung von MAC Protokollen, sowie eine Gegenüberstellung relevanter Protokolle in die Thematik ein. Daraufhin werden hardwarelimitierende Faktoren und deren Auswirkung auf die Effizienz von Kanalzugriffsprotokollen untersucht. Des Weiteren wird das vom Autor entwickelte Backoff Preamble-based MAC Protokoll (BPS-MAC) vorgestellt, welches auf die limitierten Fähigkeiten sensortypischer Hardware eingeht und für dichte Sensornetze mit korreliertem Datenverkehr optimiert ist. Ein weiterer Schwerpunkt dieser Arbeit stellt das Thema Routing dar. Hier wird ebenfalls mit einer Einteilung der Protokolle in die Thematik eingeführt. Darüber hinaus werden die wichtigsten Aufgaben von Routingprotokollen vorgestellt. Ein Überblick über häufig verwendete Routingmetriken und Routingprotokolle schließen die Einführung in diesen Themenkomplex ab. Abschließend wird das im Rahmen der Dissertation entwickelte Statistic-Based-Routing (SBR) Protokoll vorgestellt, welches ebenfalls für drahtlose Sensornetze optimiert ist. Der letzte Schwerpunkt beschreibt die Problematik der Leistungsbewertung von Routingprotokollen hinsichtlich klassischer Leistungsparameter wie Paketverlust und Verzögerung. Ebenfalls werden weitere Leistungsparameter wie zum Beispiel die vom Nutzer wahrgenommene Netzqualität genauer untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/10 KW - Routing KW - Drahtloses Sensorsystem KW - Leistungsbewertung KW - Diskrete Simulation KW - MAC KW - Kanalzugriff KW - Medium KW - MAC KW - routing KW - sensor KW - networks KW - simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52870 ER - TY - THES A1 - Zinner, Thomas T1 - Performance Modeling of QoE-Aware Multipath Video Transmission in the Future Internet T1 - Leistungsmodellierung einer Mehrpfad Video Übertragung im zukünftigen Internet unter Berücksichtigung der QoE N2 - Internet applications are becoming more and more flexible to support diverge user demands and network conditions. This is reflected by technical concepts, which provide new adaptation mechanisms to allow fine grained adjustment of the application quality and the corresponding bandwidth requirements. For the case of video streaming, the scalable video codec H.264/SVC allows the flexible adaptation of frame rate, video resolution and image quality with respect to the available network resources. In order to guarantee a good user-perceived quality (Quality of Experience, QoE) it is necessary to adjust and optimize the video quality accurately. But not only have the applications of the current Internet changed. Within network and transport, new technologies evolved during the last years providing a more flexible and efficient usage of data transport and network resources. One of the most promising technologies is Network Virtualization (NV) which is seen as an enabler to overcome the ossification of the Internet stack. It provides means to simultaneously operate multiple logical networks which allow for example application-specific addressing, naming and routing, or their individual resource management. New transport mechanisms like multipath transmission on the network and transport layer aim at an efficient usage of available transport resources. However, the simultaneous transmission of data via heterogeneous transport paths and communication technologies inevitably introduces packet reordering. Additional mechanisms and buffers are required to restore the correct packet order and thus to prevent a disturbance of the data transport. A proper buffer dimensioning as well as the classification of the impact of varying path characteristics like bandwidth and delay require appropriate evaluation methods. Additionally, for a path selection mechanism real time evaluation mechanisms are needed. A better application-network interaction and the corresponding exchange of information enable an efficient adaptation of the application to the network conditions and vice versa. This PhD thesis analyzes a video streaming architecture utilizing multipath transmission and scalable video coding and develops the following optimization possibilities and results: Analysis and dimensioning methods for multipath transmission, quantification of the adaptation possibilities to the current network conditions with respect to the QoE for H.264/SVC, and evaluation and optimization of a future video streaming architecture, which allows a better interaction of application and network. N2 - Die Applikationen im Internet passen sich immer besser an unterschiedliche Anforderungen der Nutzer und variierende Netzwerkbedingungen an. Neue Mechanismen ermöglichen die zielgerichtete Anpassung der Anwendungsqualität und damit der benötigten Bandbreite. Im Falle von Videostreaming ermöglicht der skalierbare Videocodec H.264/SVC, die flexible Veränderung der Bildwiederholungsrate, der Auflösung des Videos und der Bildqualität an die vorhandenen Ressourcen im Netzwerk. Um eine gute vom Nutzer erfahrene Dienstgüte (Quality of Experience, QoE) zu garantieren, muss die Videoqualität richtig angepasst und optimiert werden. Aber nicht nur die Anwendungen des heutigen Internets haben sich verändert. Gerade in den letzten Jahren entstanden neue Netzwerk- und Transporttechnologien, welche eine flexiblere und effizientere Nutzung der Kommunikationsnetze erlauben. Eine dieser Techniken ist die Virtualisierung von Netzwerken. Sie erlaubt es auf einem gemeinsamen physikalischen Netz verschiedene logische Netze zu betreiben, die zum Beispiel Anwendungs-abhängige Adressierung unterstützen, eigene Namensgebung erlauben oder ein individuelles Ressourcen Management ermöglichen. Neuartige Transportmechanismen wie Mehrpfadübertragung auf Netzwerk- und Transportebene des ISO/OSI Stacks streben eine effiziente Ausnutzung der zur Verfügung stehenden Übertragungsmöglichkeiten an. Doch die simultane Übertragung von Daten über heterogene Kommunikationspfade und –technologien führt unausweichlich zu einer Veränderung der Reihenfolge, in der die Pakete ankommen. Es werden zusätzliche Mechanismen und Puffer benötigt, um die ursprüngliche Paketreihenfolge wieder herzustellen und so einen störenden Einfluss auf den Datentransport zu verhindern. Die richtige Dimensionierung dieser Puffer sowie die Klassifizierung des Einflusses von variierenden Pfadparametern wie Bandbreite und Verzögerungen setzen passende Evaluierungsmethoden voraus. Darüber hinaus werden für die Auswahl von geeigneten Pfaden aus einer Menge vorhandener Pfade echtzeitfähige Bewertungsmechanismen benötigt. Eine bessere Interaktion zwischen Applikationen und Netzwerk und der damit verbundene Informationsaustausch ermöglicht die effiziente Anpassung der Applikationsqualität an das Netzwerk und umgekehrt. Diese Doktorarbeit analysiert eine auf Mehrpfadübertragung und skalierbarer Videokodierung basierende Videostreaming Architektur und erarbeitet die folgenden Optimierungsmöglichkeiten und Auswertungen: Analyse- und Dimensionierungsmethoden für Mehrpfadübertragung, Quantifizierung der Anpassungsmöglichkeiten von SVC an das Netzwerk unter Berücksichtigung der QoE und Evaluierung und Optimierung einer zukünftigen Videostreaming Architektur, welche eine stärkere Interaktion zwischen Applikation und Netzwerk ermöglicht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/12 KW - Videoübertragung KW - H.264 SVC KW - Modellierung KW - Quality-of-Experience KW - Mehrpfadübertragung KW - Multipath Transmission KW - Video Streaming KW - H.264/SVC KW - QoE KW - Performance Modeling Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-72324 ER - TY - THES A1 - Mäder, Andreas T1 - Performance Models for UMTS 3.5G Mobile Wireless Systems T1 - Leistungsmodelle für UMTS 3.5G Mobilfunksysteme N2 - Mobile telecommunication systems of the 3.5th generation (3.5G) constitute a first step towards the requirements of an all-IP world. As the denotation suggests, 3.5G systems are not completely new designed from scratch. Instead, they are evolved from existing 3G systems like UMTS or cdma2000. 3.5G systems are primarily designed and optimized for packet-switched best-effort traffic, but they are also intended to increase system capacity by exploiting available radio resources more efficiently. Systems based on cdma2000 are enhanced with 1xEV-DO (EV-DO: evolution, data-optimized). In the UMTS domain, the 3G partnership project (3GPP) specified the High Speed Packet Access (HSPA) family, consisting of High Speed Downlink Packet Access (HSDPA) and its counterpart High Speed Uplink Packet Access (HSUPA) or Enhanced Uplink. The focus of this monograph is on HSPA systems, although the operation principles of other 3.5G systems are similar. One of the main contributions of our work are performance models which allow a holistic view on the system. The models consider user traffic on flow-level, such that only on significant changes of the system state a recalculation of parameters like bandwidth is necessary. The impact of lower layers is captured by stochastic models. This approach combines accurate modeling and the ability to cope with computational complexity. Adopting this approach to HSDPA, we develop a new physical layer abstraction model that takes radio resources, scheduling discipline, radio propagation and mobile device capabilities into account. Together with models for the calculation of network-wide interference and transmit powers, a discrete-event simulation and an analytical model based on a queuing-theoretical approach are proposed. For the Enhanced Uplink, we develop analytical models considering independent and correlated other-cell interference. N2 - Die vorliegende Arbeit beschäftigt sich mit Mobilfunksystemen der Generation 3.5 im Allgemeinen, und mit den UMTS-spezifischen Ausprägungen HSDPA (High Speed Downlink Packet Access) und HSUPA (High Speed Uplink Packet Access) bzw. Enhanced Uplink im speziellen. Es werden integrierte Systeme betrachtet, d.h. 3.5G Datenkanäle koexistieren mit "klassischen" UMTS Datenkanälen wie in den Spezifikationen von UMTS Release ´99 beschrieben. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/08 KW - Mobilfunk KW - Leistungsbewertung KW - UMTS KW - HSPA KW - Funkressourcenverwaltung KW - Modellierungstechniken KW - Netzwerkplanung KW - UMTS KW - HSPA KW - radio resource management KW - modeling techniques KW - network planning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32525 ER - TY - THES A1 - Pries, Jan Rastin T1 - Performance Optimization of Wireless Infrastructure and Mesh Networks T1 - Leistungsoptimierung von drahtlosen Infrastruktur und Mesh Netzen N2 - Future broadband wireless networks should be able to support not only best effort traffic but also real-time traffic with strict Quality of Service (QoS) constraints. In addition, their available resources are scare and limit the number of users. To facilitate QoS guarantees and increase the maximum number of concurrent users, wireless networks require careful planning and optimization. In this monograph, we studied three aspects of performance optimization in wireless networks: resource optimization in WLAN infrastructure networks, quality of experience control in wireless mesh networks, and planning and optimization of wireless mesh networks. An adaptive resource management system is required to effectively utilize the limited resources on the air interface and to guarantee QoS for real-time applications. Thereby, both WLAN infrastructure and WLAN mesh networks have to be considered. An a-priori setting of the access parameters is not meaningful due to the contention-based medium access and the high dynamics of the system. Thus, a management system is required which dynamically adjusts the channel access parameters based on the network load. While this is sufficient for wireless infrastructure networks, interferences on neighboring paths and self-interferences have to be considered for wireless mesh networks. In addition, a careful channel allocation and route assignment is needed. Due to the large parameter space, standard optimization techniques fail for optimizing large wireless mesh networks. In this monograph, we reveal that biology-inspired optimization techniques, namely genetic algorithms, are well-suitable for the planning and optimization of wireless mesh networks. Although genetic algorithms generally do not always find the optimal solution, we show that with a good parameter set for the genetic algorithm, the overall throughput of the wireless mesh network can be significantly improved while still sharing the resources fairly among the users. N2 - Die Anbindung an das Internet erfolgt zunehmend über drahtlose Netze. Deren Ressourcen sind allerdings limitiert, was die Anzahl der unterstützten Nutzer stark einschränkt. Zudem ist ein Trend dieser Nutzer weg von der Verwendung reiner Datendienste zu Diensten mit Echtzeitanforderungen wie Voice over IP (VoIP) zu erkennen, deren Dienstgüteanforderungen eingehalten werden müssen. Heutige drahtlose Zugangsnetze sind jedoch nur für den herkömmlichen Datenverkehr ausgelegt. Der IEEE 802.11 WLAN Standard unterscheidet zwar zwischen verschiedenen Dienstklassen, gibt aber keine Dienstgütegarantien. Um die Dienstgüte (Quality of Service, QoS), bzw. die vom Nutzer erfahrene Dienstgüte (Quality of Experience, QoE) zu garantieren, müssen die zukünftigen drahtlosen Netze daher sorgfältig geplant und optimiert werden. Um die limitierten Ressourcen auf der Luftschnittstelle effektiv zu nutzen und um Dienstgüteanforderungen für Echtzeitanwendungen einzuhalten, bedarf es eines adaptiven Ressourcenmanagements. Dabei sind sowohl drahtlose Infrastruktur, als auch drahtlose Mesh-Netze zu betrachten. Durch den randomisierten Medienzugriff und die hohe Dynamik im System ist eine a-priori Wahl der Zugangsparameter nicht sinnvoll. Vielmehr wird ein Managementsystem benötigt, das die Zugangsparameter dynamisch in Abhängigkeit der Last in einem Netz wählt. Während dies für drahtlose Infrastrukturnetze ausreicht, müssen in drahtlosen Mesh-Netzen zusätzlich noch Interferenzen von Nachbarpfaden und Eigeninterferenzen berücksichtigt werden. Desweiteren ist eine sorgfältige Planung der Kanalzuweisung und des Routings notwendig, um einerseits den Durchsatz in drahtlosen Mesh-Netzen zu maximieren und andererseits die Ressourcen fair zwischen den Stationen aufzuteilen. Da es dabei eine Vielzahl von Parametern zu berücksichtigen gilt, sind neue Optimierungsmethoden notwendig, die es ermöglichen, auch große Mesh-Netze in annehmbarer Zeit zu planen und zu optimieren. Diese Doktorarbeit arbeitet die folgenden drei Optimierungsmöglichkeiten für drahtlose Zugangsnetze aus: Optimierung der Zugangsparameter in drahtlosen Infrastrukturnetzen, Optimierung von drahtlosen Mesh-Netzen unter Berücksichtigung der QoE und Planung und Optimierung von drahtlosen Mesh-Netzen mit Berücksichtigung einer fairen Ressourcenallokation. Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Optimierungsmöglichkeiten. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/10 KW - IEEE 802.11 KW - Leistungsbewertung KW - Optimierung KW - Dienstgüte KW - Netzplanung KW - Drahtloses lokales Netz KW - WLAN KW - Mesh Netze KW - Genetische Optimierung KW - WLAN KW - Optimization KW - Mesh Networks KW - Genetic Optimization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46097 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Philosophical and Computational Approaches for Estimating and Visualizing Months of Revelations of Quranic Chapters N2 - The question of why the Quran structure does not follow its chronology of revelation is a recurring one. Some Islamic scholars such as [1] have answered the question using hadiths, as well as other philosophical reasons based on internal evidences of the Quran itself. Unfortunately till today many are still wondering about this issue. Muslims believe that the Quran is a summary and a copy of the content of a preserved tablet called Lawhul-Mahfuz located in the heaven. Logically speaking, this suggests that the arrangement of the verses and chapters is expected to be similar to that of the Lawhul-Mahfuz. As for the arrangement of the verses in each chapter, there is unanimity that it was carried out by the Prophet himself under the guidance of Angel Gabriel with the recommendation of God. But concerning the ordering of the chapters, there are reports about some divergences [3] among the Prophet’s companions as to which chapter should precede which one. This paper argues that Quranic chapters might have been arranged according to months and seasons of revelation. In fact, based on some verses of the Quran, it is defendable that the Lawhul-Mahfuz itself is understood to have been structured in terms of the months of the year. In this study, philosophical and mathematical arguments for computing chapters’ months of revelation are discussed, and the result is displayed on an interactive scatter plot. KW - Text Mining KW - Visualisierung KW - Koran KW - Text mining KW - Visualization KW - Chronology of revelation KW - Chapters arrangement KW - Quran KW - Lawhul-Mahfuz Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-65784 ER - TY - CHAP ED - von Mammen, Sebastian ED - Klemke, Roland ED - Lorber, Martin T1 - Proceedings of the 1st Games Technology Summit BT - part of Clash of Realites 11th International Conference on the Technology and Theory of Digital Games N2 - As part of the Clash of Realities International Conference on the Technology and Theory of Digital Games, the Game Technology Summit is a premium venue to bring together experts from academia and industry to disseminate state-of-the-art research on trending technology topics in digital games. In this first iteration of the Game Technology Summit, we specifically paid attention on how the successes in AI in Natural User Interfaces have been impacting the games industry (industry track) and which scientific, state-of-the-art ideas and approaches are currently pursued (scientific track). KW - Veranstaltung KW - Künstliche Intelligenz KW - Mensch-Maschine-Kommunikation KW - Computerspiel KW - natural user interfaces KW - artificial intelligence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245776 SN - 978-3-945459-36-2 ER - TY - JOUR A1 - Kammerer, Klaus A1 - Pryss, Rüdiger A1 - Hoppenstedt, Burkhard A1 - Sommer, Kevin A1 - Reichert, Manfred T1 - Process-driven and flow-based processing of industrial sensor data JF - Sensors N2 - For machine manufacturing companies, besides the production of high quality and reliable machines, requirements have emerged to maintain machine-related aspects through digital services. The development of such services in the field of the Industrial Internet of Things (IIoT) is dealing with solutions such as effective condition monitoring and predictive maintenance. However, appropriate data sources are needed on which digital services can be technically based. As many powerful and cheap sensors have been introduced over the last years, their integration into complex machines is promising for developing digital services for various scenarios. It is apparent that for components handling recorded data of these sensors they must usually deal with large amounts of data. In particular, the labeling of raw sensor data must be furthered by a technical solution. To deal with these data handling challenges in a generic way, a sensor processing pipeline (SPP) was developed, which provides effective methods to capture, process, store, and visualize raw sensor data based on a processing chain. Based on the example of a machine manufacturing company, the SPP approach is presented in this work. For the company involved, the approach has revealed promising results. KW - data stream processing KW - cyber-physical systems KW - processing pipeline KW - sensor networks Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213089 SN - 1424-8220 VL - 20 IS - 18 ER - TY - JOUR A1 - Caliskan, Aylin A1 - Crouch, Samantha A. W. A1 - Giddins, Sara A1 - Dandekar, Thomas A1 - Dangwal, Seema T1 - Progeria and aging — Omics based comparative analysis JF - Biomedicines N2 - Since ancient times aging has also been regarded as a disease, and humankind has always strived to extend the natural lifespan. Analyzing the genes involved in aging and disease allows for finding important indicators and biological markers for pathologies and possible therapeutic targets. An example of the use of omics technologies is the research regarding aging and the rare and fatal premature aging syndrome progeria (Hutchinson-Gilford progeria syndrome, HGPS). In our study, we focused on the in silico analysis of differentially expressed genes (DEGs) in progeria and aging, using a publicly available RNA-Seq dataset (GEO dataset GSE113957) and a variety of bioinformatics tools. Despite the GSE113957 RNA-Seq dataset being well-known and frequently analyzed, the RNA-Seq data shared by Fleischer et al. is far from exhausted and reusing and repurposing the data still reveals new insights. By analyzing the literature citing the use of the dataset and subsequently conducting a comparative analysis comparing the RNA-Seq data analyses of different subsets of the dataset (healthy children, nonagenarians and progeria patients), we identified several genes involved in both natural aging and progeria (KRT8, KRT18, ACKR4, CCL2, UCP2, ADAMTS15, ACTN4P1, WNT16, IGFBP2). Further analyzing these genes and the pathways involved indicated their possible roles in aging, suggesting the need for further in vitro and in vivo research. In this paper, we (1) compare “normal aging” (nonagenarians vs. healthy children) and progeria (HGPS patients vs. healthy children), (2) enlist genes possibly involved in both the natural aging process and progeria, including the first mention of IGFBP2 in progeria, (3) predict miRNAs and interactomes for WNT16 (hsa-mir-181a-5p), UCP2 (hsa-mir-26a-5p and hsa-mir-124-3p), and IGFBP2 (hsa-mir-124-3p, hsa-mir-126-3p, and hsa-mir-27b-3p), (4) demonstrate the compatibility of well-established R packages for RNA-Seq analysis for researchers interested but not yet familiar with this kind of analysis, and (5) present comparative proteomics analyses to show an association between our RNA-Seq data analyses and corresponding changes in protein expression. KW - progeria KW - aging KW - omics KW - RNA sequencing KW - bioinformatics KW - sun exposure KW - HGPS KW - IGFBP2 KW - ACKR4 KW - WNT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289868 SN - 2227-9059 VL - 10 IS - 10 ER - TY - THES A1 - Huber, Stephan T1 - Proxemo: Documenting Observed Emotions in HCI T1 - Proxemo: Die Dokumentation Beobachteter Emotionen in der Mensch-Computer-Interaktion N2 - For formative evaluations of user experience (UX) a variety of methods have been developed over the years. However, most techniques require the users to interact with the study as a secondary task. This active involvement in the evaluation is not inclusive of all users and potentially biases the experience currently being studied. Yet there is a lack of methods for situations in which the user has no spare cognitive resources. This condition occurs when 1) users' cognitive abilities are impaired (e.g., people with dementia) or 2) users are confronted with very demanding tasks (e.g., air traffic controllers). In this work we focus on emotions as a key component of UX and propose the new structured observation method Proxemo for formative UX evaluations. Proxemo allows qualified observers to document users' emotions by proxy in real time and then directly link them to triggers. Technically this is achieved by synchronising the timestamps of emotions documented by observers with a video recording of the interaction. In order to facilitate the documentation of observed emotions in highly diverse contexts we conceptualise and implement two separate versions of a documentation aid named Proxemo App. For formative UX evaluations of technology-supported reminiscence sessions with people with dementia, we create a smartwatch app to discreetly document emotions from the categories anger, general alertness, pleasure, wistfulness and pride. For formative UX evaluations of prototypical user interfaces with air traffic controllers we create a smartphone app to efficiently document emotions from the categories anger, boredom, surprise, stress and pride. Descriptive case studies in both application domains indicate the feasibility and utility of the method Proxemo and the appropriateness of the respectively adapted design of the Proxemo App. The third part of this work is a series of meta-evaluation studies to determine quality criteria of Proxemo. We evaluate Proxemo regarding its reliability, validity, thoroughness and effectiveness, and compare Proxemo's efficiency and the observers' experience to documentation with pen and paper. Proxemo is reliable, as well as more efficient, thorough and effective than handwritten notes and provides a better UX to observers. Proxemo compares well with existing methods where benchmarks are available. With Proxemo we contribute a validated structured observation method that has shown to meet requirements formative UX evaluations in the extreme contexts of users with cognitive impairments or high task demands. Proxemo is agnostic regarding researchers' theoretical approaches and unites reductionist and holistic perspectives within one method. Future work should explore the applicability of Proxemo for further domains and extend the list of audited quality criteria to include, for instance, downstream utility. With respect to basic research we strive to better understand the sources leading observers to empathic judgments and propose reminisce and older adults as model environment for investigating mixed emotions. N2 - Für formative Evaluationen der User Experience (UX) wurden im Laufe der Jahre zahlreiche Methoden entwickelt. Die meisten Methoden erfordern jedoch, dass die Benutzer als Nebenaufgabe mit der Studie interagieren. Diese aktive Beteiligung an der Evaluation kann das untersuchte Erlebnis verfälschen und schließt Benutzer komplett aus, die keine kognitiven Ressourcen zur Verfügung haben. Dies ist der Fall, wenn 1) die kognitiven Fähigkeiten der Benutzer beeinträchtigt sind (z. B. Menschen mit Demenz) oder 2) Benutzer mit sehr anspruchsvollen Aufgaben konfrontiert sind (z. B. Fluglotsen). In dieser Arbeit konzentrieren wir uns auf Emotionen als eine Schlüsselkomponente von UX und schlagen die neue strukturierte Beobachtungsmethode Proxemo für formative UX-Evaluationen vor. Proxemo ermöglicht es qualifizierten Beobachtern, die Emotionen der Nutzer in Echtzeit zu dokumentieren und sie direkt mit Auslösern zu verknüpfen. Technisch wird dies erreicht, indem die Zeitstempel der von den Beobachtern dokumentierten Emotionen mit einer Videoaufzeichnung der Interaktion synchronisiert werden. Um die Dokumentation von beobachteten Emotionen in sehr unterschiedlichen Kontexten zu erleichtern, konzipieren und implementieren wir zwei verschiedene Versionen einer Dokumentationshilfe namens Proxemo App. Für formative UX-Evaluationen von technologiegestützten Erinnerungssitzungen mit Menschen mit Demenz erstellen wir eine Smartwatch-App zur unauffälligen Dokumentation von Emotionen aus den Kategorien Ärger, allgemeine Wachsamkeit, Freude, Wehmut und Stolz. Für formative UX-Evaluationen prototypischer Nutzerschnittstellen mit Fluglotsen erstellen wir eine Smartphone-App zur effizienten Dokumentation von Emotionen aus den Kategorien Ärger, Langeweile, Überraschung, Stress und Stolz. Deskriptive Fallstudien in beiden Anwendungsfeldern zeigen die Machbarkeit und den Nutzen der Methode Proxemo und die Angemessenheit des jeweiligen Designs der Proxemo App. Der dritte Teil dieser Arbeit besteht aus einer Reihe von Meta-Evaluationsstudien zu den Gütekriterien von Proxemo. Wir evaluieren Proxemo hinsichtlich der Reliabilität, Validität, Gründlichkeit und Effektivität, und vergleichen die Effizienz von Proxemo und die UX der Beobachter mit der Dokumentation mit Stift und Papier. Proxemo ist reliabel, sowie effizienter, gründlicher und effektiver als handschriftliche Notizen und bietet den Beobachtern eine bessere UX. Proxemo schneidet gut ab im Vergleich zu bestehenden Methoden, für die Benchmarks verfügbar sind. Mit Proxemo stellen wir eine validierte, strukturierte Beobachtungsmethode vor, die nachweislich den Anforderungen formativer UX Evaluationen in den extremen Kontexten von Benutzern mit kognitiven Beeinträchtigungen oder hohen Aufgabenanforderungen gerecht wird. Proxemo ist agnostisch bezüglich der theoretischen Ansätze von Forschenden und vereint reduktionistische und ganzheitliche Perspektiven in einer Methode. Zukünftige Arbeiten sollten die Anwendbarkeit von Proxemo für weitere Domänen erkunden und die Liste der geprüften Gütekriterien erweitern, zum Beispiel um das Kriterium Downstream Utility. In Bezug auf die Grundlagenforschung werden wir versuchen, die Quellen besser zu verstehen, auf denen die empathischen Urteile der Beobachter fußen und schlagen Erinnerungen und ältere Erwachsene als Modellumgebung für die künftige Erforschung gemischter Emotionen vor. KW - Gefühl KW - Wissenschaftliche Beobachtung KW - Methode KW - Benutzererlebnis KW - Benutzerforschung KW - Emotionserkennung KW - Emotion inference KW - Emotionsinterpretation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-305730 ER - TY - JOUR A1 - Koopmann, Tobias A1 - Stubbemann, Maximilian A1 - Kapa, Matthias A1 - Paris, Michael A1 - Buenstorf, Guido A1 - Hanika, Tom A1 - Hotho, Andreas A1 - Jäschke, Robert A1 - Stumme, Gerd T1 - Proximity dimensions and the emergence of collaboration: a HypTrails study on German AI research JF - Scientometrics N2 - Creation and exchange of knowledge depends on collaboration. Recent work has suggested that the emergence of collaboration frequently relies on geographic proximity. However, being co-located tends to be associated with other dimensions of proximity, such as social ties or a shared organizational environment. To account for such factors, multiple dimensions of proximity have been proposed, including cognitive, institutional, organizational, social and geographical proximity. Since they strongly interrelate, disentangling these dimensions and their respective impact on collaboration is challenging. To address this issue, we propose various methods for measuring different dimensions of proximity. We then present an approach to compare and rank them with respect to the extent to which they indicate co-publications and co-inventions. We adapt the HypTrails approach, which was originally developed to explain human navigation, to co-author and co-inventor graphs. We evaluate this approach on a subset of the German research community, specifically academic authors and inventors active in research on artificial intelligence (AI). We find that social proximity and cognitive proximity are more important for the emergence of collaboration than geographic proximity. KW - collaboration KW - dimensions of proximity KW - co-authorships KW - co-inventorships KW - embedding techniques Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269831 SN - 1588-2861 VL - 126 IS - 12 ER - TY - THES A1 - Schlosser, Daniel T1 - Quality of Experience Management in Virtual Future Networks T1 - Netzwerkmanagement unter Berücksichtigung der vom Benutzer erfahrenen Dienstgüte in virtuellen zukünftigen Netzen N2 - Aktuell beobachten wir eine drastische Vervielfältigung der Dienste und Anwendungen, die das Internet für den Datentransport nutzen. Dabei unterscheiden sich die Anforderungen dieser Dienste an das Netzwerk deutlich. Das Netzwerkmanagement wird durch diese Diversität der nutzenden Dienste aber deutlich erschwert, da es einem Datentransportdienstleister kaum möglich ist, die unterschiedlichen Verbindungen zu unterscheiden, ohne den Inhalt der transportierten Daten zu analysieren. Netzwerkvirtualisierung ist eine vielversprechende Lösung für dieses Problem, da sie es ermöglicht für verschiedene Dienste unterschiedliche virtuelle Netze auf dem gleichen physikalischen Substrat zu betreiben. Diese Diensttrennung ermöglicht es, jedes einzelne Netz anwendungsspezifisch zu steuern. Ziel einer solchen Netzsteuerung ist es, sowohl die vom Nutzer erfahrene Dienstgüte als auch die Kosteneffizienz des Datentransports zu optimieren. Darüber hinaus wird es mit Netzwerkvirtualisierung möglich das physikalische Netz so weit zu abstrahieren, dass die aktuell fest verzahnten Rollen von Netzwerkbesitzer und Netzwerkbetreiber entkoppelt werden können. Darüber hinaus stellt Netzwerkvirtualisierung sicher, dass unterschiedliche Datennetze, die gleichzeitig auf dem gleichen physikalischen Netz betrieben werden, sich gegenseitig weder beeinflussen noch stören können. Diese Arbeit  beschäftigt sich mit ausgewählten Aspekten dieses Themenkomplexes und fokussiert sich darauf, ein virtuelles Netzwerk mit bestmöglicher Dienstqualität für den Nutzer zu betreiben und zu steuern. Dafür wird ein Top-down-Ansatz gewählt, der von den Anwendungsfällen, einer möglichen Netzwerkvirtualisierungs-Architektur und aktuellen Möglichkeiten der Hardwarevirtualisierung ausgeht. Im Weiteren fokussiert sich die Arbeit dann in Richtung Bestimmung und Optimierung der vom Nutzer erfahrenen Dienstqualität (QoE) auf Applikationsschicht und diskutiert Möglichkeiten zur Messung und Überwachung von wesentlichen Netzparametern in virtualisierten Netzen. N2 - Currently, we observe a strong growth of services and applications, which use the Internet for data transport. However, the network requirements of these applications differ significantly. This makes network management difficult, since it complicated to separate network flows into application classes without inspecting application layer data. Network virtualization is a promising solution to this problem. It enables running different virtual network on the same physical substrate. Separating networks based on the service supported within allows controlling each network according to the specific needs of the application. The aim of such a network control is to optimize the user perceived quality as well as the cost efficiency of the data transport. Furthermore, network virtualization abstracts the network functionality from the underlying implementation and facilitates the split of the currently tightly integrated roles of Internet Service Provider and network owner. Additionally, network virtualization guarantees that different virtual networks run on the same physical substrate do not interfere with each other. This thesis discusses different aspects of the network virtualization topic. It is focused on how to manage and control a virtual network to guarantee the best Quality of Experience for the user. Therefore, a top-down approach is chosen. Starting with use cases of virtual networks, a possible architecture is derived and current implementation options based on hardware virtualization are explored. In the following, this thesis focuses on assessing the Quality of Experience perceived by the user and how it can be optimized on application layer. Furthermore, options for measuring and monitoring significant network parameters of virtual networks are considered. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/12 KW - Netzwerkmanagement KW - Dienstgüte KW - Netzwerkvirtualisierung KW - QoS KW - QoE KW - Network Virtualization KW - Quality of Experience KW - Network Management KW - Quality of Service Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69986 ER - TY - JOUR A1 - Singh, Amit K. A1 - Kingston, Joseph J. A1 - Gupta, Shishir K. A1 - Batra, Harsh V. T1 - Recombinant Bivalent Fusion Protein rVE Induces CD4+ and CD8+ T-Cell Mediated Memory Immune Response for Protection Against Yersinia enterocolitica Infection JF - Frontiers in Microbiology N2 - Studies investigating the correlates of immune protection against Yersinia infection have established that both humoral and cell mediated immune responses are required for the comprehensive protection. In our previous study, we established that the bivalent fusion protein (rVE) comprising immunologically active regions of Y pestis LcrV (100-270 aa) and YopE (50-213 aa) proteins conferred complete passive and active protection against lethal Y enterocolitica 8081 challenge. In the present study, cohort of BALB/c mice immunized with rVE or its component proteins rV, rE were assessed for cell mediated immune responses and memory immune protection against Y enterocolitica 8081 rVE immunization resulted in extensive proliferation of both CD4 and CD8 T cell subsets; significantly high antibody titer with balanced IgG1: IgG2a/IgG2b isotypes (1:1 ratio) and up regulation of both Th1 (INF-\(\alpha\), IFN-\(\gamma\), IL 2, and IL 12) and Th2 (IL 4) cytokines. On the other hand, rV immunization resulted in Th2 biased IgG response (11:1 ratio) and proliferation of CD4+ T-cell; rE group of mice exhibited considerably lower serum antibody titer with predominant Th1 response (1:3 ratio) and CD8+ T-cell proliferation. Comprehensive protection with superior survival (100%) was observed among rVE immunized mice when compared to the significantly lower survival rates among rE (37.5%) and rV (25%) groups when IP challenged with Y enterocolitica 8081 after 120 days of immunization. Findings in this and our earlier studies define the bivalent fusion protein rVE as a potent candidate vaccine molecule with the capability to concurrently stimulate humoral and cell mediated immune responses and a proof of concept for developing efficient subunit vaccines against Gram negative facultative intracellular bacterial pathogens. KW - I-tasser KW - Yersinia enterocolitica KW - memory immune responses KW - cytokine profiling KW - CD8+T cells KW - CD4+T cells KW - recombinant protein rVE KW - resistance KW - pneumonic plague KW - pestis infection KW - nonhuman-primates KW - III secretion KW - V-antigen KW - mice KW - vaccine Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136114 VL - 6 IS - 1407 ER - TY - JOUR A1 - Reinhard, Sebastian A1 - Helmerich, Dominic A. A1 - Boras, Dominik A1 - Sauer, Markus A1 - Kollmannsberger, Philip T1 - ReCSAI: recursive compressed sensing artificial intelligence for confocal lifetime localization microscopy JF - BMC Bioinformatics N2 - Background Localization-based super-resolution microscopy resolves macromolecular structures down to a few nanometers by computationally reconstructing fluorescent emitter coordinates from diffraction-limited spots. The most commonly used algorithms are based on fitting parametric models of the point spread function (PSF) to a measured photon distribution. These algorithms make assumptions about the symmetry of the PSF and thus, do not work well with irregular, non-linear PSFs that occur for example in confocal lifetime imaging, where a laser is scanned across the sample. An alternative method for reconstructing sparse emitter sets from noisy, diffraction-limited images is compressed sensing, but due to its high computational cost it has not yet been widely adopted. Deep neural network fitters have recently emerged as a new competitive method for localization microscopy. They can learn to fit arbitrary PSFs, but require extensive simulated training data and do not generalize well. A method to efficiently fit the irregular PSFs from confocal lifetime localization microscopy combining the advantages of deep learning and compressed sensing would greatly improve the acquisition speed and throughput of this method. Results Here we introduce ReCSAI, a compressed sensing neural network to reconstruct localizations for confocal dSTORM, together with a simulation tool to generate training data. We implemented and compared different artificial network architectures, aiming to combine the advantages of compressed sensing and deep learning. We found that a U-Net with a recursive structure inspired by iterative compressed sensing showed the best results on realistic simulated datasets with noise, as well as on real experimentally measured confocal lifetime scanning data. Adding a trainable wavelet denoising layer as prior step further improved the reconstruction quality. Conclusions Our deep learning approach can reach a similar reconstruction accuracy for confocal dSTORM as frame binning with traditional fitting without requiring the acquisition of multiple frames. In addition, our work offers generic insights on the reconstruction of sparse measurements from noisy experimental data by combining compressed sensing and deep learning. We provide the trained networks, the code for network training and inference as well as the simulation tool as python code and Jupyter notebooks for easy reproducibility. KW - compressed sensing KW - AI KW - SMLM KW - FLIMbee KW - dSTORM Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-299768 VL - 23 IS - 1 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Reference Architecture, Design of Cascading Style Sheets Processing Model N2 - The technique of using Cascading Style Sheets (CSS) to format and present structured data is called CSS processing model. For instance a CSS processing model for XML documents describes steps involved in formatting and presenting XML documents on screens or papers. Many software applications such as browsers and XML editors have their own CSS processing models which are part of their rendering engines. For instance each browser based on its CSS processing model renders CSS layout differently, as a result an inconsistency in the support of CSS features arises. Some browsers support more CSS features than others, and the rendering itself varies. Moreover the W3C standards are not even adhered by some browsers such as Internet Explorer. Test suites and other hacks and filters cannot definitely solve these problems, because these solutions are temporary and fragile. To palliate this inconsistency and browser compatibility issues with respect to CSS, a reference CSS processing model is needed. By extension it could even allow interoperability across CSS rendering engines. A reference architecture would provide common software architecture and interfaces, and facilitate refactoring, reuse, and automated unit testing. In [2] a reference architecture for browsers has been proposed. However this reference architecture is a macro reference model which does not consider separately individual components of rendering and layout engines. In this paper an attempt to develop a reference architecture for CSS processing models is discussed. In addition the Vex editor [3] rendering and layout engines, as well as an extended version of the editor used in TextGrid project [5] are also presented in order to validate the proposed reference architecture. KW - Cascading Style Sheets KW - XML KW - Softwarearchitektur KW - CSS KW - XML KW - Processing Model KW - Reference Architecture Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51328 ER - TY - RPRT A1 - Gallenmüller, Sebastian A1 - Scholz, Dominik A1 - Stubbe, Henning A1 - Hauser, Eric A1 - Carle, Georg T1 - Reproducible by Design: Network Experiments with pos T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - In scientific research, the independent reproduction of experiments is the source of trust. Detailed documentation is required to enable experiment reproduction. Reproducibility awards were created to honor the increased documentation effort. In this work, we propose a novel approach toward reproducible research—a structured experimental workflow that allows the creation of reproducible experiments without requiring additional efforts of the researcher. Moreover, we present our own testbed and toolchain, namely, plain orchestrating service (pos), which enables the creation of such experimental workflows. The experiment is documented by our proposed, fully scripted experiment structure. In addition, pos provides scripts enabling the automation of the bundling and release of all experimental artifacts. We provide an interactive environment where pos experiments can be executed and reproduced, available at https://gallenmu.github.io/single-server-experiment. KW - Datennetz KW - Reproducibility KW - Testbed KW - Network Experiments KW - plain orchestrating service KW - pos Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280834 ER - TY - THES A1 - Martin, Rüdiger T1 - Resilience, Provisioning, and Control for the Network of the Future T1 - Ausfallsicherheit, Dimensionierungsansätze und Kontrollmechanismen für das Netz der Zukunft N2 - The Internet sees an ongoing transformation process from a single best-effort service network into a multi-service network. In addition to traditional applications like e-mail,WWW-traffic, or file transfer, future generation networks (FGNs) will carry services with real-time constraints and stringent availability and reliability requirements like Voice over IP (VoIP), video conferencing, virtual private networks (VPNs) for finance, other real-time business applications, tele-medicine, or tele-robotics. Hence, quality of service (QoS) guarantees and resilience to failures are crucial characteristics of an FGN architecture. At the same time, network operations must be efficient. This necessitates sophisticated mechanisms for the provisioning and the control of future communication infrastructures. In this work we investigate such echanisms for resilient FGNs. There are many aspects of the provisioning and control of resilient FGNs such as traffic matrix estimation, traffic characterization, traffic forecasting, mechanisms for QoS enforcement also during failure cases, resilient routing, or calability concerns for future routing and addressing mechanisms. In this work we focus on three important aspects for which performance analysis can deliver substantial insights: load balancing for multipath Internet routing, fast resilience concepts, and advanced dimensioning techniques for resilient networks. Routing in modern communication networks is often based on multipath structures, e.g., equal-cost multipath routing (ECMP) in IP networks, to facilitate traffic engineering and resiliency. When multipath routing is applied, load balancing algorithms distribute the traffic over available paths towards the destination according to pre-configured distribution values. State-of-the-art load balancing algorithms operate either on the packet or the flow level. Packet level mechanisms achieve highly accurate traffic distributions, but are known to have negative effects on the performance of transport protocols and should not be applied. Flow level mechanisms avoid performance degradations, but at the expense of reduced accuracy. These inaccuracies may have unpredictable effects on link capacity requirements and complicate resource management. Thus, it is important to exactly understand the accuracy and dynamics of load balancing algorithms in order to be able to exercise better network control. Knowing about their weaknesses, it is also important to look for alternatives and to assess their applicability in different networking scenarios. This is the first aspect of this work. Component failures are inevitable during the operation of communication networks and lead to routing disruptions if no special precautions are taken. In case of a failure, the robust shortest-path routing of the Internet reconverges after some time to a state where all nodes are again reachable – provided physical connectivity still exists. But stringent availability and reliability criteria of new services make a fast reaction to failures obligatory for resilient FGNs. This led to the development of fast reroute (FRR) concepts for MPLS and IP routing. The operations of MPLS-FRR have already been standardized. Still, the standards leave some degrees of freedom for the resilient path layout and it is important to understand the tradeoffs between different options for the path layout to efficiently provision resilient FGNs. In contrast, the standardization for IP-FRR is an ongoing process. The applicability and possible combinations of different concepts still are open issues. IP-FRR also facilitates a comprehensive resilience framework for IP routing covering all steps of the failure recovery cycle. These points constitute another aspect of this work. Finally, communication networks are usually over-provisioned, i.e., they have much more capacity installed than actually required during normal operation. This is a precaution for various challenges such as network element failures. An alternative to this capacity overprovisioning (CO) approach is admission control (AC). AC blocks new flows in case of imminent overload due to unanticipated events to protect the QoS for already admitted flows. On the one hand, CO is generally viewed as a simple mechanism, AC as a more complex mechanism that complicates the network control plane and raises interoperability issues. On the other hand, AC appears more cost-efficient than CO. To obtain advanced provisioning methods for resilient FGNs, it is important to find suitable models for irregular events, such as failures and different sources of overload, and to incorporate them into capacity dimensioning methods. This allows for a fair comparison between CO and AC in various situations and yields a better understanding of the strengths and weaknesses of both concepts. Such an advanced capacity dimensioning method for resilient FGNs represents the third aspect of this work. N2 - Das Internet befindet sich gegenwärtig in einem Transformationsprozess von einem Netz mit einer einzigen best-effort Dienstklasse hin zu einem Mehr-Dienste-Netz. Zusätzlich zu herkömmlichen Anwendungen wie E-Mail, WWW oder Datenübertragung werden zukünftige Netze Dienste mit Echtzeitbedürfnissen und strikten Anforderungen an Verfügbarkeit und Zuverlässigkeit wie Voice over IP (VoIP), Videokonferenzdienste, Virtual Private Networks (VPNs) für Finanzanwendungen und andere Geschäftsanwendungen mit Echtzeitanforderungen, Tele-Medizin oder Telerobotik tragen. Daher sind die Gewährleistung von Dienstgüte und Ausfallsicherheit wesentliche Merkmale zukünftiger Netzarchitekturen. Gleichzeitig muss der Netzbetrieb effizient sein. Dies zieht den Bedarf an ausgefeilten Mechanismen für die Dimensionierung und Kontrolle ausfallsicherer Kommunikationsstrukturen nach sich. In dieser Arbeit werden solche Mechanismen, nämlich Lastaufteilung, Konzepte zur schnellen Reaktion im Fehlerfall und intelligente Ansätze zur Netzdimensionierung, untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/08 KW - Backbone-Netz KW - load balancing KW - resilience KW - fast reroute KW - admission control KW - overprovisioning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28497 ER - TY - RPRT A1 - Elsayed, Karim A1 - Rizk, Amr T1 - Response Times in Time-to-Live Caching Hierarchies under Random Network Delays T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Time-to-Live (TTL) caches decouple the occupancy of objects in cache through object-specific validity timers. Stateof- the art techniques provide exact methods for the calculation of object-specific hit probabilities given entire cache hierarchies with random inter-cache network delays. The system hit probability is a provider-centric metric as it relates to the origin offload, i.e., the decrease in the number of requests that are served by the content origin server. In this paper we consider a user-centric metric, i.e., the response time, which is shown to be structurally different from the system hit probability. Equipped with the state-of-theart exact modeling technique using Markov-arrival processes we derive expressions for the expected object response time and pave a way for its optimization under network delays. KW - Datennetz KW - TTL Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280843 ER - TY - THES A1 - Herrmann, Christian T1 - Robotic Motion Compensation for Applications in Radiation Oncology T1 - Robotergestützte Bewegungskompensation für Anwendungen in der Radioonkologie N2 - Aufgrund vieler Verbesserungen der Behandlungsmethoden im Laufe der letzten 60 Jahre, erlaubt die Strahlentherapie heutzutage präzise Behandlungen von statischen Tumoren. Jedoch birgt die Bestrahlung von sich bewegenden Tumoren noch große Herausforderungen in sich, da bewegliche Tumore oft den Behandlungsstrahl verlassen. Dabei reduziert sich die Strahlendosis im Tumor während sich diese im umliegenden gesunden Gewebe erhöht. Diese Forschungsarbeit zielt darauf ab, die Grenzen der Strahlentherapie zu erweitern, um präzise Behandlungen von beweglichen Tumoren zu ermöglichen. Der Fokus der Arbeit liegt auf der Erstellung eines Echtzeitsystems zur aktiven Kompensation von Tumorbewegungen durch robotergestützte Methoden. Während Behandlungen befinden sich Patienten auf einer Patientenliege, mit der statische Lagerungsfehler vor Beginn einer Behandlung korrigiert werden. Die in dieser Arbeit verwendete Patientenliege "HexaPOD" ist ein paralleler Manipulator mit sechs Freiheitsgraden, der große Lasten innerhalb eines eingeschränkten Arbeitsbereichs präzise positionieren kann. Obwohl der HexaPOD ursprünglich nicht für dynamische Anwendungen konzipiert wurde, wird dieser für eine dauerhafte Bewegungskompensation eingesetzt, in dem Patienten so bewegt werden, dass Tumore präzise im Zentralstrahl während der Dauer einer gesamten Behandlung verbleiben. Um ein echtzeitfähiges Kompensationssystem auf Basis des HexaPODs zu realisieren, muss eine Reihe an Herausforderungen bewältigt werden. Echtzeitaspekte werden einerseits durch die Verwendung eines harten Echtzeitbetriebssystems abgedeckt, andererseits durch die Messung und Schätzung von Latenzzeiten aller physikalischen Größen im System, z.B. Messungen der Tumor- und Atemposition. Neben der konsistenten und durchgängigen Berücksichtigung von akkuraten Zeitinformation, werden alle software-induzierten Latenzen adaptiv ausgeglichen. Dies erfordert Vorhersagen der Tumorposition in die nahe Zukunft. Zahlreiche Prädiktoren zur Atem- und Tumorpositionsvorhersage werden vorgeschlagen und anhand verschiedenster Metriken evaluiert. Erweiterungen der Prädiktionsalgorithmen werden eingeführt, die sowohl Atem- als auch Tumorpositionsinformationen fusionieren, um Vorhersagen ohne explizites Korrelationsmodell zu ermöglichen. Die Vorhersagen bestimmen den zukünftigen Bewegungspfad des HexaPODs, um Tumorbewegungen zu kompensieren. Dazu werden verschiedene Regler entwickelt, die eine Trajektorienverfolgung mit dem HexaPOD ermöglichen. Auf der Basis von linearer und nicht-linearer dynamischer Modellierung des HexaPODs mit Methoden der Systemidentifikation, wird zunächst ein modellprädiktiver Regler entwickelt. Ein zweiter Regler wird auf Basis einer Annahme über das Arbeitsprinzip des internen Reglers im HexaPOD entworfen. Schließlich wird ein dritter Regler vorgeschlagen, der beide vorhergehenden Regler miteinander kombiniert. Für jeden dieser Regler werden vergleichende Ergebnisse aus Experimenten mit realer Hardware und menschlichen Versuchspersonen präsentiert und diskutiert. Darüber hinaus wird die geeignete Wahl von freien Parametern in den Reglern vorgestellt. Neben einer präzisen Verfolgung der Referenztrajektorie spielt der Patientenkomfort eine entscheidende Rolle für die Akzeptanz des Systems. Es wird gezeigt, dass die Regler glatte Trajektorien realisieren können, um zu garantieren, dass sich Patienten wohl fühlen während ihre Tumorbewegung mit Genauigkeiten im Submillimeterbereich ausgeglichen wird. Gesamtfehler werden im Kompensationssystem analysiert, in dem diese zu Trajektorienverfolgungsfehlern und Prädiktionsfehlern in Beziehung gesetzt werden. Durch Ausnutzung von Eigenschaften verschiedener Prädiktoren wird gezeigt, dass die Startzeit des Systems bis die Verfolgung der Referenztrajektorie erreicht ist, wenige Sekunden beträgt. Dies gilt insbesondere für den Fall eines initial ruhenden HexaPODs und ohne Vorwissen über Tumorbewegungen. Dies zeigt die Eignung des Systems für die sehr kurz fraktionierten Behandlungen von Lungentumoren. Das Tumorkompensationssystem wurde ausschließlich auf Basis von klinischer Standard-Hardware entwickelt, die in vielen Behandlungsräumen zu finden ist. Durch ein einfaches und flexibles Design können Behandlungsräume in kosteneffizienter Weise um Möglichkeiten der Bewegungskompensation ergänzt werden. Darüber hinaus werden aktuelle Behandlungsmethoden wie intensitätsmodulierte Strahlentherapie oder Volumetric Modulated Arc Therapy in keiner Weise eingeschränkt. Aufgrund der Unterstützung verschiedener Kompensationsmodi kann das System auf alle beweglichen Tumore angewendet werden, unabhängig davon ob die Bewegungen vorhersagbar (Lungentumore) oder nicht vorhersagbar (Prostatatumore) sind. Durch Integration von geeigneten Methoden zur Tumorpositionsbestimmung kann das System auf einfache Weise zur Kompensation von anderen Tumoren erweitert werden. N2 - Radiation therapy today, on account of improvements in treatment procedures over the last 60 years, allows precise treatment of static tumors inside the human body. However, irradiation of moving tumors is still a challenging task as moving tumors often leave the treatment beam and the radiation dose delivered to the tumor reduces simultaneously increasing that on healthy tissue. This research work aims to push the frontiers of radiation therapy in order to enable precise treatment of moving tumors with focus on research and development of a unique real-time system enabling active motion compensation through robotic means to compensate tumor motion. During treatment, patients lie on a treatment couch which is normally used for static position corrections of patient set-up errors prior to radiation treatment. The treatment couch used, called HexaPOD, is a parallel manipulator with six degrees of freedom which can precisely position heavy loads inside a small region. Despite the HexaPOD not initially built with dynamics in mind, it is used in this work for sustained motion compensation by moving patients such that tumors stay precisely located at the center of the treatment beam during the complete course of treatment. In order to realize real-time tumor motion compensation by means of the HexaPOD, several challanges need to be addressed. Real-time aspects are covered by the adoption of a hard real-time operation system in combination with measurement and estimation of latencies of all physical quantities in the compensation system such as tumor or breathing position measurements. Accurate timing information is respected consistently in the whole system and all software-induced latencies are adaptively compensated for. This requires knowledge of future tumor positions from predictors. Several predictors for breathing and tumor motion predictions are proposed and evaluated in terms of a variety of different performance metrics. Extensions to prediction algorithms are introduced fusing both breathing and tumor position information to allow for predictions without the need of an explicit correlation model. Predictions determine the future motion path of the HexaPOD in order to compensate for tumor motion. Several control schemes are developed to enable reference tracking for the HexaPOD. Based on linear and non-linear dynamic modelling of the HexaPOD with system identification methods, a first controller is derived in the form of a model predictive controller. A second controller is proposed based on an assumption of the working principle of the HexaPOD's internal controller. Finally, a third controller is derived as combination of the first and second one. For each of these controllers, comparative results with real hardware experiments and humans in the loop as well as choices of free parameters are presented and discussed. Apart from precise tracking, emphasis is placed on patient comfort which is of crucial importance for acceptance of the system. It is demonstrated that smooth trajectories can be realized by the controllers to guarantee that patients feel comfortable while their tumor motion is compensated at sub-millimeter accuracies. Overall errors of the system are analyzed by relating them to tracking and prediction errors. By exploiting the properties of different predictors, it is shown that the startup time until tracking is reached can be reduced to only a few seconds, even in the case of an initially at-rest HexaPOD and with no initial knowledge of tumor motion. This makes the system especially suitable for the relatively short-fractionated treatment sessions for lung tumors. The tumor motion compensation system has been developed solely based on standard clinical hardware, found in most treatment rooms. With a simple and flexible design, existing treatment can be updated in a cost-efficient way to introduce motion compensation capabilities. Simultaneously, the system does not impose any constraints on state-of-the-art treatment types such as intensity modulated radiotherapy or volumetric modulated arc therapy. Supporting different compensation modes, the system can be applied to any moving tumor whether its motion is predictable (lung tumors) or unpredictable (prostate tumors). By integration of adequate tumor position determination methods, the system can be easily extended to other tumors as well. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 7 KW - Robotik KW - Bewegungskompensation KW - Regelung KW - Strahlentherapie KW - Vorhersage KW - Tumorbewegung KW - Echzeit KW - Prediction KW - Tumor motion KW - Real-time Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79045 SN - 978-3-923959-88-4 ER - TY - THES A1 - Busch, Stephan T1 - Robust, Flexible and Efficient Design for Miniature Satellite Systems T1 - Moderne Kleinstsatelliten - Zwischen Robustheit, Flexibilität und Effizienz N2 - Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology. This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg’s advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner. Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions. The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested. N2 - Miniaturisierte Satellitensysteme übernehmen zunehmend eine entscheidende Rolle in der fortschreitenden Globalisierung und Demokratisierung der Raumfahrt. Großes Innovationspotential und neue Kommerzialisierungschancen verspricht der effektive Einsatz von Kleinstsatelliten in zukünftigen fraktionierten Missionen für Erdbeobachtungs- und Kommunikationsanwendungen. Basierend auf vielen kleinen kooperierenden Systemen können diese Systeme zukünftig große multifunktionale Satelliten ergänzen oder ersetzen. Die Herausforderung bei der Entwicklung miniaturisierter Satellitensysteme ist die Gratwanderung zwischen der im Rahmen der Miniaturisierung notwendigen Effizienz, der für die Erfüllung der Mission geforderten Zuverlässigkeit und der wünschenswerten Wiederverwendbarkeit und Erweiterbarkeit zur Realisierung agiler Kleinstsatellitenserien. Diese Arbeit adressiert verschiedene Aspekte für den optimalen Entwurf robuster, flexibler und effizienter Kleinstsatelliten am Beispiel des UWE Pico-Satelliten Bus der Universität Würzburg. Mit dem Ziel der Entwicklung einer soliden Basisplattform für zukünftige Kleinstsatelliten-Formationen wurden entsprechende Designansätze im Rahmen des UWE-3 Projektes in einem integralen Designansatz konsistent umgesetzt. Neben der Entwicklung von effizienten Redundanzkonzepten mit minimalem Overhead für den optimalen Betrieb auf Ressourcen-limitierten Kleinstsatelliten wurde ein modularer Satellitenbus entworfen, der als eine robuste und erweiterbare Basis für zukünftige Missionen dienen soll. Damit realisiert UWE-3 eine der effizientesten Kleinstsatelliten-Architekturen die in den letzten Jahren in den Orbit gebracht wurde. Dargestellte Missionsergebnisse fassen den erfolgreichen Betrieb des Satelliten seit seinem Launch in Jahr 2013 zusammen. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 11 KW - Kleinsatellit KW - Fehlertoleranz KW - Miniaturisierung KW - Modularität KW - Picosatellite KW - Satellit Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136523 SN - 978-3-945459-10-2 ER - TY - JOUR A1 - Gupta, Shishir K. A1 - Minocha, Rashmi A1 - Thapa, Prithivi Jung A1 - Srivastava, Mugdha A1 - Dandekar, Thomas T1 - Role of the pangolin in origin of SARS-CoV-2: an evolutionary perspective JF - International Journal of Molecular Sciences N2 - After the recent emergence of SARS-CoV-2 infection, unanswered questions remain related to its evolutionary history, path of transmission or divergence and role of recombination. There is emerging evidence on amino acid substitutions occurring in key residues of the receptor-binding domain of the spike glycoprotein in coronavirus isolates from bat and pangolins. In this article, we summarize our current knowledge on the origin of SARS-CoV-2. We also analyze the host ACE2-interacting residues of the receptor-binding domain of spike glycoprotein in SARS-CoV-2 isolates from bats, and compare it to pangolin SARS-CoV-2 isolates collected from Guangdong province (GD Pangolin-CoV) and Guangxi autonomous regions (GX Pangolin-CoV) of South China. Based on our comparative analysis, we support the view that the Guangdong Pangolins are the intermediate hosts that adapted the SARS-CoV-2 and represented a significant evolutionary link in the path of transmission of SARS-CoV-2 virus. We also discuss the role of intermediate hosts in the origin of Omicron. KW - COVID-19 KW - SARS-CoV-2 KW - origin KW - evolution KW - intermediate host KW - pangolin KW - mutation KW - recombination KW - adaptation KW - transmission KW - comparative sequence analysis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285995 SN - 1422-0067 VL - 23 IS - 16 ER - TY - THES A1 - Betz, Christian T1 - Scalable authoring of diagnostic case based training systems T1 - Skalierbare Erstellung diagnostischer fallbasierter Trainingssysteme N2 - Diagnostic Case Based Training Systems (D-CBT) provide learners with a means to learn and exercise knowledge in a realistic context. In medical education, D-CBT Systems present virtual patients to the learners who are asked to examine, diagnose and state therapies for these patients. Due a number of conflicting and changing requirements, e.g. time for learning, authoring effort, several systems were developed so far. These systems range from simple, easy-to-use presentation systems to highly complex knowledge based systems supporting explorative learning. This thesis presents an approach and tools to create D-CBT systems from existing sources (documents, e.g. dismissal records) using existing tools (word processors): Authors annotate and extend the documents to model the knowledge. A scalable knowledge representation is able to capture the content on multiple levels, from simple to highly structured knowledge. Thus, authoring of D-CBT systems requires less prerequisites and pre-knowledge and is faster than approaches using specialized authoring environments. Also, authors can iteratively add and structure more knowledge to adapt training cases to their learners needs. The theses also discusses the application of the same approach to other domains, especially to knowledge acquisition for the Semantic Web. N2 - Fallbasierte diagnostische Trainingssysteme (FDT) ermöglichen es Lernern, Wissen durch Anwendung in einem realistischen Kontext zu erwerben und zu festigen. In der medizinischen Ausbildung präsentieren FDT Systeme virtuelle Patienten, an denen der Lerner die Auswahl und Interpretation der richtigen Untersuchungen, die Diagnostik und die Bestimmung geeigneter Therapien erlernen und üben kann. Eine Vielzahl von Anforderungen durch die Lerner und die Autoren solcher Systeme hat zur Entwicklung unterschiedlicher Trainingsumgebungen geführt. Darunter gibt es einfache, präsentationsorientierte Systeme ebenso wie komplexe wissensbasierte Systeme, die exploratives Lernern erlauben. Diese Dissertation untersucht einen Ansatz und Werkzeuge, um FDT Systeme aus vorhandenen Daten (d.h. Dokumenten, beispielsweise Entlassschreiben) und mit Hilfe bekannter Werkzeuge (d.h. Textverarbeitung) zu entwickeln: Die Autoren annotieren dazu die Dokumente, um die Fälle zu modellieren. Eine skalierbare Wissensrepräsentation kann das so extrahierte Wissen auf verschiedenen Ebenen erfassen, angefangen mit unstrukturierten Elementen bis zu Wissensmodellen mit kausalen Beziehungen. Autoren können mit Hilfe des vorgestellten Ansatzes fallbasierte diagnostische Trainingssysteme mit geringerem Vorwissen und schneller erstellen als mit Hilfe spezialisierter Autorensysteme. Dabei können die Autoren insbesondere die Fälle sukzessive mit weiterem Wissen anreichern und so auf die Anforderungen ihrer Lerner anpassen. In der Dissertation wird darüber hinaus die Anwendung des Ansatzes und der entstandenen Werkzeuge auf andere Domänen untersucht. Besonders interessant ist dabei die Anwendung in der Wissensakquisition für das Semantic Web. KW - Computerunterstütztes Lernen KW - Medizin KW - Wissensrepräsentation KW - Trainingssystem KW - agile Prozesse KW - Semantic Web KW - d3web.Train KW - knowledge representation KW - training systems KW - agile processes KW - semantic web KW - d3web.Train Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-17885 ER - TY - JOUR A1 - Zimmerer, Chris A1 - Fischbach, Martin A1 - Latoschik, Marc Erich T1 - Semantic Fusion for Natural Multimodal Interfaces using Concurrent Augmented Transition Networks JF - Multimodal Technologies and Interaction N2 - Semantic fusion is a central requirement of many multimodal interfaces. Procedural methods like finite-state transducers and augmented transition networks have proven to be beneficial to implement semantic fusion. They are compliant with rapid development cycles that are common for the development of user interfaces, in contrast to machine-learning approaches that require time-costly training and optimization. We identify seven fundamental requirements for the implementation of semantic fusion: Action derivation, continuous feedback, context-sensitivity, temporal relation support, access to the interaction context, as well as the support of chronologically unsorted and probabilistic input. A subsequent analysis reveals, however, that there is currently no solution for fulfilling the latter two requirements. As the main contribution of this article, we thus present the Concurrent Cursor concept to compensate these shortcomings. In addition, we showcase a reference implementation, the Concurrent Augmented Transition Network (cATN), that validates the concept’s feasibility in a series of proof of concept demonstrations as well as through a comparative benchmark. The cATN fulfills all identified requirements and fills the lack amongst previous solutions. It supports the rapid prototyping of multimodal interfaces by means of five concrete traits: Its declarative nature, the recursiveness of the underlying transition network, the network abstraction constructs of its description language, the utilized semantic queries, and an abstraction layer for lexical information. Our reference implementation was and is used in various student projects, theses, as well as master-level courses. It is openly available and showcases that non-experts can effectively implement multimodal interfaces, even for non-trivial applications in mixed and virtual reality. KW - multimodal fusion KW - multimodal interface KW - semantic fusion KW - procedural fusion methods KW - natural interfaces KW - human-computer interaction Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197573 SN - 2414-4088 VL - 2 IS - 4 ER -