TY - CHAP ED - Kolla, Reiner T1 - 9. Fachgespräch Sensornetze der GI/ITG Fachgruppe Kommunikation und Verteilte Systeme N2 - Jährliches Fachgespräch zu Sensornetzen der GI/ITG Fachgruppe Kommunikation und Verteilte Systeme, 16. - 17. September 2010, Universität Würzburg KW - Drahtloses Sensorsystem KW - Fachgespräch KW - Aufsatzsammlung KW - sensor network KW - wireless network Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51106 ER - TY - JOUR A1 - Staiger, Christine A1 - Cadot, Sidney A1 - Kooter, Raul A1 - Dittrich, Marcus A1 - Müller, Tobias A1 - Klau, Gunnar W. A1 - Wessels, Lodewyk F. A. T1 - A Critical Evaluation of Network and Pathway-Based Classifiers for Outcome Prediction in Breast Cancer JF - PLoS One N2 - Recently, several classifiers that combine primary tumor data, like gene expression data, and secondary data sources, such as protein-protein interaction networks, have been proposed for predicting outcome in breast cancer. In these approaches, new composite features are typically constructed by aggregating the expression levels of several genes. The secondary data sources are employed to guide this aggregation. Although many studies claim that these approaches improve classification performance over single genes classifiers, the gain in performance is difficult to assess. This stems mainly from the fact that different breast cancer data sets and validation procedures are employed to assess the performance. Here we address these issues by employing a large cohort of six breast cancer data sets as benchmark set and by performing an unbiased evaluation of the classification accuracies of the different approaches. Contrary to previous claims, we find that composite feature classifiers do not outperform simple single genes classifiers. We investigate the effect of (1) the number of selected features; (2) the specific gene set from which features are selected; (3) the size of the training set and (4) the heterogeneity of the data set on the performance of composite feature and single genes classifiers. Strikingly, we find that randomization of secondary data sources, which destroys all biological information in these sources, does not result in a deterioration in performance of composite feature classifiers. Finally, we show that when a proper correction for gene set size is performed, the stability of single genes sets is similar to the stability of composite feature sets. Based on these results there is currently no reason to prefer prognostic classifiers based on composite features over single genes classifiers for predicting outcome in breast cancer. KW - modules KW - protein-interaction networks KW - expression signature KW - classification KW - set KW - metastasis KW - stability KW - survival KW - database KW - markers Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-131323 VL - 7 IS - 4 ER - TY - CHAP A1 - Davies, Richard A1 - Dewell, Nathan A1 - Harvey, Carlo T1 - A framework for interactive, autonomous and semantic dialogue generation in games T2 - Proceedings of the 1st Games Technology Summit N2 - Immersive virtual environments provide users with the opportunity to escape from the real world, but scripted dialogues can disrupt the presence within the world the user is trying to escape within. Both Non-Playable Character (NPC) to Player and NPC to NPC dialogue can be non-natural and the reliance on responding with pre-defined dialogue does not always meet the players emotional expectations or provide responses appropriate to the given context or world states. This paper investigates the application of Artificial Intelligence (AI) and Natural Language Processing to generate dynamic human-like responses within a themed virtual world. Each thematic has been analysed against humangenerated responses for the same seed and demonstrates invariance of rating across a range of model sizes, but shows an effect of theme and the size of the corpus used for fine-tuning the context for the game world. KW - natural language processing · · · KW - interactive authoring system KW - semantic understanding KW - artificial intelligence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246023 ER - TY - JOUR A1 - Schmid, Benjamin A1 - Schindelin, Johannes A1 - Cardona, Albert A1 - Longair, Martin A1 - Heisenberg, Martin T1 - A high-level 3D visualization API for Java and ImageJ N2 - Background: Current imaging methods such as Magnetic Resonance Imaging (MRI), Confocal microscopy, Electron Microscopy (EM) or Selective Plane Illumination Microscopy (SPIM) yield three-dimensional (3D) data sets in need of appropriate computational methods for their analysis. The reconstruction, segmentation and registration are best approached from the 3D representation of the data set. Results: Here we present a platform-independent framework based on Java and Java 3D for accelerated rendering of biological images. Our framework is seamlessly integrated into ImageJ, a free image processing package with a vast collection of community-developed biological image analysis tools. Our framework enriches the ImageJ software libraries with methods that greatly reduce the complexity of developing image analysis tools in an interactive 3D visualization environment. In particular, we provide high-level access to volume rendering, volume editing, surface extraction, and image annotation. The ability to rely on a library that removes the low-level details enables concentrating software development efforts on the algorithm implementation parts. Conclusions: Our framework enables biomedical image software development to be built with 3D visualization capabilities with very little effort. We offer the source code and convenient binary packages along with extensive documentation at http://3dviewer.neurofly.de. KW - Visualisierung KW - Java 3D KW - ImageJ KW - framework Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-67851 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - A Knowledge-based Hybrid Statistical Classifier for Reconstructing the Chronology of the Quran N2 - Computationally categorizing Quran’s chapters has been mainly confined to the determination of chapters’ revelation places. However this broad classification is not sufficient to effectively and thoroughly understand and interpret the Quran. The chronology of revelation would not only improve comprehending the philosophy of Islam, but also the easiness of implementing and memorizing its laws and recommendations. This paper attempts estimating possible chapters’ dates of revelation through their lexical frequency profiles. A hybrid statistical classifier consisting of stemming and clustering algorithms for comparing lexical frequency profiles of chapters, and deriving dates of revelation has been developed. The classifier is trained using some chapters with known dates of revelation. Then it classifies chapters with uncertain dates of revelation by computing their proximity to the training ones. The results reported here indicate that the proposed methodology yields usable results in estimating dates of revelation of the Quran’s chapters based on their lexical contents. KW - Text Mining KW - Maschinelles Lernen KW - text categorization KW - Bayesian classifier KW - distance-based classifier KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-54712 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - A Rule-based Statistical Classifier for Determining a Base Text and Ranking Witnesses In Textual Documents Collation Process N2 - Given a collection of diverging documents about some lost original text, any person interested in the text would try reconstructing it from the diverging documents. Whether it is eclecticism, stemmatics, or copy-text, one is expected to explicitly or indirectly select one of the documents as a starting point or as a base text, which could be emended through comparison with remaining documents, so that a text that could be designated as the original document is generated. Unfortunately the process of giving priority to one of the documents also known as witnesses is a subjective approach. In fact even Cladistics, which could be considered as a computer-based approach of implementing stemmatics, does not present or recommend users to select a certain witness as a starting point for the process of reconstructing the original document. In this study, a computational method using a rule-based Bayesian classifier is used, to assist text scholars in their attempts of reconstructing a non-existing document from some available witnesses. The method developed in this study consists of selecting a base text successively and collating it with remaining documents. Each completed collation cycle stores the selected base text and its closest witness, along with a weighted score of their similarities and differences. At the end of the collation process, a witness selected more often by majority of base texts is considered as the probable base text of the collection. Witnesses’ scores are weighted using a weighting system, based on effects of types of textual modifications on the process of reconstructing original documents. Users have the possibility to select between baseless and base text collation. If a base text is selected, the task is reduced to ranking the witnesses with respect to the base text, otherwise a base text as well as ranking of the witnesses with respect to the base text are computed and displayed on a histogram. KW - Textvergleich KW - Text Mining KW - Gothenburg Modell KW - Bayes-Klassifikator KW - Textual document collation KW - Base text KW - Gothenburg model KW - Bayesian classifier KW - Textual alterations weighting system Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57465 ER - TY - CHAP A1 - Ali, Qasim A1 - Montenegro, Sergio T1 - A Simple Approach to Quadrocopter Formation Flying Test Setup for Education and Development T2 - INTED2015 Proceedings N2 - A simple test setup has been developed at Institute of Aerospace Information Technology, University of Würzburg, Germany to realize basic functionalities for formation flight of quadrocopters. The test environment is planned to be utilized for developing and validating the algorithms for formation flying capability in real environment as well as for education purpose. An already existing test bed for single quadrocopter was extended with necessary inter-communication and distributed control mechanism to test the algorithms for formation flights in 2 degrees of freedom (roll / pitch). This study encompasses the domain of communication, control engineering and embedded systems programming. Bluetooth protocol has been used for inter-communication between two quadrocopters. A simple approach of PID control in combination with Kalman filter has been exploited. MATLAB Instrument Control Toolbox has been used for data display, plotting and analysis. Plots can be drawn in real-time and received information can also be stored in the form of files for later use and analysis. The test setup has been developed indigenously and at considerably low cost. Emphasis has been placed on simplicity to facilitate students learning process. Several lessons have been learnt during the course of development of this setup. Proposed setup is quite flexible that can be modified as per changing requirements. KW - Flugkörper KW - Design and Development KW - Formation Flight KW - Instrument Control Toolbox KW - Quadrocopter KW - Unmanned Aerial Vehicle KW - Quadrocopter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-114495 SN - 978-84-606-5763-7 SN - 2340-1079 SP - 2776 EP - 2784 PB - International Academy of Technology, Education and Development (IATED) ER - TY - JOUR A1 - Prantl, Thomas A1 - Zeck, Timo A1 - Bauer, Andre A1 - Ten, Peter A1 - Prantl, Dominik A1 - Yahya, Ala Eddine Ben A1 - Ifflaender, Lukas A1 - Dmitrienko, Alexandra A1 - Krupitzer, Christian A1 - Kounev, Samuel T1 - A Survey on Secure Group Communication Schemes With Focus on IoT Communication JF - IEEE Access N2 - A key feature for Internet of Things (IoT) is to control what content is available to each user. To handle this access management, encryption schemes can be used. Due to the diverse usage of encryption schemes, there are various realizations of 1-to-1, 1-to-n, and n-to-n schemes in the literature. This multitude of encryption methods with a wide variety of properties presents developers with the challenge of selecting the optimal method for a particular use case, which is further complicated by the fact that there is no overview of existing encryption schemes. To fill this gap, we envision a cryptography encyclopedia providing such an overview of existing encryption schemes. In this survey paper, we take a first step towards such an encyclopedia by creating a sub-encyclopedia for secure group communication (SGC) schemes, which belong to the n-to-n category. We extensively surveyed the state-of-the-art and classified 47 different schemes. More precisely, we provide (i) a comprehensive overview of the relevant security features, (ii) a set of relevant performance metrics, (iii) a classification for secure group communication schemes, and (iv) workflow descriptions of the 47 schemes. Moreover, we perform a detailed performance and security evaluation of the 47 secure group communication schemes. Based on this evaluation, we create a guideline for the selection of secure group communication schemes. KW - Internet of Things KW - encryption KW - secure group communication Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300257 VL - 10 SP - 99944 EP - 99962 ER - TY - JOUR A1 - Hein, Rebecca M. A1 - Wienrich, Carolin A1 - Latoschik, Marc E. T1 - A systematic review of foreign language learning with immersive technologies (2001-2020) JF - AIMS Electronics and Electrical Engineering N2 - This study provides a systematic literature review of research (2001–2020) in the field of teaching and learning a foreign language and intercultural learning using immersive technologies. Based on 2507 sources, 54 articles were selected according to a predefined selection criteria. The review is aimed at providing information about which immersive interventions are being used for foreign language learning and teaching and where potential research gaps exist. The papers were analyzed and coded according to the following categories: (1) investigation form and education level, (2) degree of immersion, and technology used, (3) predictors, and (4) criterions. The review identified key research findings relating the use of immersive technologies for learning and teaching a foreign language and intercultural learning at cognitive, affective, and conative levels. The findings revealed research gaps in the area of teachers as a target group, and virtual reality (VR) as a fully immersive intervention form. Furthermore, the studies reviewed rarely examined behavior, and implicit measurements related to inter- and trans-cultural learning and teaching. Inter- and transcultural learning and teaching especially is an underrepresented investigation subject. Finally, concrete suggestions for future research are given. The systematic review contributes to the challenge of interdisciplinary cooperation between pedagogy, foreign language didactics, and Human-Computer Interaction to achieve innovative teaching-learning formats and a successful digital transformation. KW - foreign language learning and teaching KW - intercultural learning and teaching KW - immersive technologies KW - education KW - human-computer interaction KW - systematic literature review Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268811 VL - 5 IS - 2 ER - TY - JOUR A1 - Halbig, Andreas A1 - Latoschik, Marc Erich T1 - A systematic review of physiological measurements, factors, methods, and applications in virtual reality JF - Frontiers in Virtual Reality N2 - Measurements of physiological parameters provide an objective, often non-intrusive, and (at least semi-)automatic evaluation and utilization of user behavior. In addition, specific hardware devices of Virtual Reality (VR) often ship with built-in sensors, i.e. eye-tracking and movements sensors. Hence, the combination of physiological measurements and VR applications seems promising. Several approaches have investigated the applicability and benefits of this combination for various fields of applications. However, the range of possible application fields, coupled with potentially useful and beneficial physiological parameters, types of sensor, target variables and factors, and analysis approaches and techniques is manifold. This article provides a systematic overview and an extensive state-of-the-art review of the usage of physiological measurements in VR. We identified 1,119 works that make use of physiological measurements in VR. Within these, we identified 32 approaches that focus on the classification of characteristics of experience, common in VR applications. The first part of this review categorizes the 1,119 works by field of application, i.e. therapy, training, entertainment, and communication and interaction, as well as by the specific target factors and variables measured by the physiological parameters. An additional category summarizes general VR approaches applicable to all specific fields of application since they target typical VR qualities. In the second part of this review, we analyze the target factors and variables regarding the respective methods used for an automatic analysis and, potentially, classification. For example, we highlight which measurement setups have been proven to be sensitive enough to distinguish different levels of arousal, valence, anxiety, stress, or cognitive workload in the virtual realm. This work may prove useful for all researchers wanting to use physiological data in VR and who want to have a good overview of prior approaches taken, their benefits and potential drawbacks. KW - virtual reality KW - use cases KW - sesnsors KW - tools KW - biosignals KW - psychophyisology KW - HMD (Head-Mounted Display) KW - systematic review Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260503 VL - 2 ER - TY - JOUR A1 - Grohmann, Johannes A1 - Herbst, Nikolas A1 - Chalbani, Avi A1 - Arian, Yair A1 - Peretz, Noam A1 - Kounev, Samuel T1 - A Taxonomy of Techniques for SLO Failure Prediction in Software Systems JF - Computers N2 - Failure prediction is an important aspect of self-aware computing systems. Therefore, a multitude of different approaches has been proposed in the literature over the past few years. In this work, we propose a taxonomy for organizing works focusing on the prediction of Service Level Objective (SLO) failures. Our taxonomy classifies related work along the dimensions of the prediction target (e.g., anomaly detection, performance prediction, or failure prediction), the time horizon (e.g., detection or prediction, online or offline application), and the applied modeling type (e.g., time series forecasting, machine learning, or queueing theory). The classification is derived based on a systematic mapping of relevant papers in the area. Additionally, we give an overview of different techniques in each sub-group and address remaining challenges in order to guide future research. KW - taxonomy KW - survey KW - failure prediction KW - anomaly prediction KW - anomaly detection KW - self-aware computing KW - self-adaptive systems KW - performance prediction Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200594 SN - 2073-431X VL - 9 IS - 1 ER - TY - CHAP A1 - Schlosser, Daniel A1 - Jarschel, Michael A1 - Duelli, Michael A1 - Hoßfeld, Tobias A1 - Hoffmann, Klaus A1 - Hoffmann, Marco A1 - Morper, Hans Jochen A1 - Jurca, Dan A1 - Khan, Ashiq T1 - A Use Case Driven Approach to Network Virtualization N2 - In today's Internet, services are very different in their requirements on the underlying transport network. In the future, this diversity will increase and it will be more difficult to accommodate all services in a single network. A possible approach to cope with this diversity within future networks is the introduction of support for running isolated networks for different services on top of a single shared physical substrate. This would also enable easy network management and ensure an economically sound operation. End-customers will readily adopt this approach as it enables new and innovative services without being expensive. In order to arrive at a concept that enables this kind of network, it needs to be designed around and constantly checked against realistic use cases. In this contribution, we present three use cases for future networks. We describe functional blocks of a virtual network architecture, which are necessary to support these use cases within the network. Furthermore, we discuss the interfaces needed between the functional blocks and consider standardization issues that arise in order to achieve a global consistent control and management structure of virtual networks. KW - Virtualisierung KW - Datenkommunikationsnetz KW - Internet KW - Rechnernetz KW - Anwendungsfall KW - Netzvirtualisierung KW - Standardisierung KW - Use case KW - network virtualization KW - future Internet architecture KW - standardization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55611 N1 - Accepted at IEEE Kaleidoscope 2010 ER - TY - RPRT A1 - Alfredsson, Rebecka A1 - Kassler, Andreas A1 - Vestin, Jonathan A1 - Pieska, Marcus A1 - Amend, Markus T1 - Accelerating a Transport Layer based 5G Multi-Access Proxy on SmartNIC T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Utilizing multiple access technologies such as 5G, 4G, and Wi-Fi within a coherent framework is currently standardized by 3GPP within 5G ATSSS. Indeed, distributing packets over multiple networks can lead to increased robustness, resiliency and capacity. A key part of such a framework is the multi-access proxy, which transparently distributes packets over multiple paths. As the proxy needs to serve thousands of customers, scalability and performance are crucial for operator deployments. In this paper, we leverage recent advancements in data plane programming, implement a multi-access proxy based on the MP-DCCP tunneling approach in P4 and hardware accelerate it by deploying the pipeline on a smartNIC. This is challenging due to the complex scheduling and congestion control operations involved. We present our pipeline and data structures design for congestion control and packet scheduling state management. Initial measurements in our testbed show that packet latency is in the range of 25 μs demonstrating the feasibility of our approach. KW - Datennetz KW - multipath KW - MP-DCCP KW - 5G-ATSSS KW - networking KW - dataplane programming KW - P4 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280798 ER - TY - RPRT A1 - Brisch, Fabian A1 - Kassler, Andreas A1 - Vestin, Jonathan A1 - Pieska, Marcus A1 - Amend, Markus T1 - Accelerating Transport Layer Multipath Packet Scheduling for 5G-ATSSS T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Utilizing multiple access networks such as 5G, 4G, and Wi-Fi simultaneously can lead to increased robustness, resiliency, and capacity for mobile users. However, transparently implementing packet distribution over multiple paths within the core of the network faces multiple challenges including scalability to a large number of customers, low latency, and high-capacity packet processing requirements. In this paper, we offload congestion-aware multipath packet scheduling to a smartNIC. However, such hardware acceleration faces multiple challenges due to programming language and platform limitations. We implement different multipath schedulers in P4 with different complexity in order to cope with dynamically changing path capacities. Using testbed measurements, we show that our CMon scheduler, which monitors path congestion in the data plane and dynamically adjusts scheduling weights for the different paths based on path state information, can process more than 3.5 Mpps packets 25 μs latency. KW - multipath packet scheduling KW - P4 KW - MP-DCCP KW - 5G KW - ATSSSS Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322052 ER - TY - THES A1 - Baunach, Marcel T1 - Advances in Distributed Real-Time Sensor/Actuator Systems Operation - Operating Systems, Communication, and Application Design Concepts - T1 - Fortschritte im Betrieb drahtloser Sensor/Aktuator Netzwerke N2 - This work takes a close look at several quite different research areas related to the design of networked embedded sensor/actuator systems. The variety of the topics illustrates the potential complexity of current sensor network applications; especially when enriched with actuators for proactivity and environmental interaction. Besides their conception, development, installation and long-term operation, we'll mainly focus on more "low-level" aspects: Compositional hardware and software design, task cooperation and collaboration, memory management, and real-time operation will be addressed from a local node perspective. In contrast, inter-node synchronization, communication, as well as sensor data acquisition, aggregation, and fusion will be discussed from a rather global network view. The diversity in the concepts was intentionally accepted to finally facilitate the reliable implementation of truly complex systems. In particular, these should go beyond the usual "sense and transmit of sensor data", but show how powerful today's networked sensor/actuator systems can be despite of their low computational performance and constrained hardware: If their resources are only coordinated efficiently! N2 - Diese Arbeit behandelt einige sehr unterschiedliche Forschungsbereiche bezüglich des Designs vernetzter und eingebetteter Sensor/Aktuator-Systeme. Die Vielfalt der Themen zeigt die potenzielle Komplexität aktueller Sensornetzwerk-Anwendungen, insbesondere wenn sie mit Aktuatoren zur Interaktion mit der Umwelt ausgestattet sind. Neben deren Konzeption, Entwicklung, Installation und dem langfristigen Betrieb wird besonders auf diverse "low-level" Aspekte eingegangen: Kompositionelles Hardware- und Software-Design, Task Kooperation und Kollaboration, Speicher-Verwaltung und Echtzeit-Betrieb werden aus lokaler Sicht der Sensorknoten betrachtet. Im Kontrast werden Knoten-Synchronisation, Kommunikation, sowie Sensordatenerfassung, -aggregation und -fusion aus globaler Netzwerk-Sicht diskutiert. Die Vielfalt der behandelten Konzepte wurde bewusst in Kauf genommen, um letztlich die zuverlässige Umsetzung sehr komplexer Systeme zu erleichtern. Insbesondere sollte dies über das übliche "Erfassen und Übertragen von Sensordaten" hinausgehen, und zeigen, wie mächtig heutige vernetzte Sensor/Aktuator-Systeme trotz ihrer geringen Rechenleistung und eingeschränkten Hardware sein können: Wenn ihre Ressourcen effizient koordiniert werden! KW - Eingebettetes System KW - Drahtloses Sensorsystem KW - Echtzeitsystem KW - Dynamische Speicherverwaltung KW - Ressourcenallokation KW - Fernwartung KW - Betriebssystem KW - Verteiltes System KW - Lokalisation KW - Embedded Systems KW - Real-Time Operating Systems KW - Localization KW - Wireless Sensor/Actuator Systems KW - Dynamic Memory Management Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-76489 ER - TY - THES A1 - Eichelberger, Holger T1 - Aesthetics and automatic layout of UML class diagrams T1 - Ästhetik und automatisches Layout von UML Klassendiagrammen N2 - In the last years, visual methods have been introduced in industrial software production and teaching of software engineering. In particular, the international standardization of a graphical software engineering language, the Unified Modeling Language (UML) was a reason for this tendency. Unfortunately, various problems exist in concrete realizations of tools, e.g. due to a missing compliance to the standard. One problem is the automatic layout, which is required for a consistent automatic software design. The thesis derives reasons and criteria for an automatic layout method, which produces drawings of UML class diagrams according to the UML specification and issues of human computer interaction, e.g. readability. A unique set of aesthetic criteria is combined from four different disciplines involved in this topic. Based on these aethetic rules, a hierarchical layout algorithm is developed, analyzed, measured by specialized measuring techniques and compared to related work. Then, the realization of the algorithm as a Java framework is given as an architectural description. Finally, adaptions to anticipated future changes of the UML, improvements of the framework and example drawings of the implementation are given. N2 - Visuelle Techniken im Software-Entwurf haben in den letzten Jahre Einzug in Industrie und Lehre gehalten. Begünstigt wurde dies durch die Unified Modeling Language (UML), eine international standardisierte, graphische Entwurfssprache. Dennoch klaffen weite Lücken bei der Umsetzung in konkrete Tools, teils an der Realisierung des Standards, insbesondere aber auch beim automatischen Layout, das für konsistenten (teil-)automatisierten Softwareentwurf unerlässlich ist. Die Arbeit stellt zunächst Gründe und Kriterien für ein standardkonformes, menschenlesbares automatisches Layout von UML Klassendiagrammen zusammen. Ästhetische Kriterien werden aus vier unterschiedlichen Fachdisziplinen destilliert und kombiniert. Basierend auf diesen Kriterien wird danach ein hierarchischer Layoutalgorithmus entwickelt, analysiert, mit speziellen Messverfahren vermessen und mit Konkurrenzalgorithmen verglichen. Im Anschluss daran wird die Realisierung des Algorithmus als Java-Framework im Rahmen einer Architekturbeschreibung diskutiert. Anpassungen an zukünftige Entwicklungen der UML, Weiterentwicklungen des Frameworks und Beispieldiagramme, die von der Implementierung generiert wurden, runden die Arbeit ab. KW - URL KW - Klassendiagramm KW - automatisches Layout KW - UML Klassendiagramm KW - semantische Ästhetik KW - Zeichnen von Graphen KW - computergestützte Softwaretechnik KW - automatic Layout KW - UML class diagram KW - semantical aesthetic KW - graph drawing KW - CASE Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14831 ER - TY - JOUR A1 - Bartl, Andrea A1 - Wenninger, Stephan A1 - Wolf, Erik A1 - Botsch, Mario A1 - Latoschik, Marc Erich T1 - Affordable but not cheap: a case study of the effects of two 3D-reconstruction methods of virtual humans JF - Frontiers in Virtual Reality N2 - Realistic and lifelike 3D-reconstruction of virtual humans has various exciting and important use cases. Our and others’ appearances have notable effects on ourselves and our interaction partners in virtual environments, e.g., on acceptance, preference, trust, believability, behavior (the Proteus effect), and more. Today, multiple approaches for the 3D-reconstruction of virtual humans exist. They significantly vary in terms of the degree of achievable realism, the technical complexities, and finally, the overall reconstruction costs involved. This article compares two 3D-reconstruction approaches with very different hardware requirements. The high-cost solution uses a typical complex and elaborated camera rig consisting of 94 digital single-lens reflex (DSLR) cameras. The recently developed low-cost solution uses a smartphone camera to create videos that capture multiple views of a person. Both methods use photogrammetric reconstruction and template fitting with the same template model and differ in their adaptation to the method-specific input material. Each method generates high-quality virtual humans ready to be processed, animated, and rendered by standard XR simulation and game engines such as Unreal or Unity. We compare the results of the two 3D-reconstruction methods in an immersive virtual environment against each other in a user study. Our results indicate that the virtual humans from the low-cost approach are perceived similarly to those from the high-cost approach regarding the perceived similarity to the original, human-likeness, beauty, and uncanniness, despite significant differences in the objectively measured quality. The perceived feeling of change of the own body was higher for the low-cost virtual humans. Quality differences were perceived more strongly for one’s own body than for other virtual humans. KW - virtual humans KW - 3D-reconstruction methods KW - avatars KW - agents KW - user study Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260492 VL - 2 ER - TY - RPRT A1 - Grigorjew, Alexej A1 - Diederich, Philip A1 - Hoßfeld, Tobias A1 - Kellerer, Wolfgang T1 - Affordable Measurement Setups for Networking Device Latency with Sub-Microsecond Accuracy T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This document presents a networking latency measurement setup that focuses on affordability and universal applicability, and can provide sub-microsecond accuracy. It explains the prerequisites, hardware choices, and considerations to respect during measurement. In addition, it discusses the necessity for exhaustive latency measurements when dealing with high availability and low latency requirements. Preliminary results show that the accuracy is within ±0.02 μs when used with the Intel I350-T2 network adapter. KW - Datennetz KW - latency Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280751 ER - TY - THES A1 - Herrler, Rainer T1 - Agentenbasierte Simulation zur Ablaufoptimierung in Krankenhäusern und anderen verteilten, dynamischen Umgebungen T1 - Agent based simulation of processes in hospitals and other distributed, dynamic environments. N2 - Verteilte dynamische Systeme unter lokalen und globalen Gesichtspunkten zu optimieren ist eine schwierige Aufgabe. Zwar sind grundsätzliche Auswirkungen einzelner Maßnahmen häufig bekannt, durch widerstrebende Ziele, Wechselwirkungen zwischen Prozessen und Nebenwirkungen von Maßnahmen ist ein analytisches Vorgehen bei der Optimierung nicht möglich. Besonders schwierig wird es, wenn lokale Einheiten einerseits ihre Ziele und Autonomie behalten sollen, aber durch zentrale Vorgaben bzw. Anreize so gesteuert werden sollen, dass ein übergeordnetes Ziel erreicht wird. Ein praktisches Beispiel dieses allgemeinen Optimierungsproblems findet sich im Gesundheitswesen. Das Management von modernen Kliniken ist stets mit dem Problem konfrontiert, die Qualität der Pflege zu gewährleisten und gleichzeitig kosteneffizient zu arbeiten. Hier gilt es unter gegeben Rahmenbedingungen und bei Respektierung der Autonomie der Funktionseinheiten, Optimierungsmaßnahmen zu finden und durchzuführen. Vorhandene Werkzeuge zur Simulation und Modellierung bieten für diese Aufgabe keine ausreichend guten Vorgehensmodelle und Modellierungsmechanismen. Die agentenbasierte Simulation ermöglicht die Abbildung solcher Systeme und die Durchführung von Simulationsexperimenten zur Bewertung einzelner Maßnahmen. Es werden Lösungswege und Werkzeuge vorgestellt und evaluiert, die den Benutzer bei der Formalisierung des Wissens und der Modellierung solch komplexer Szenarien unterstützen und ein systematisches Vorgehen zur Optimierung ermöglichen. N2 - To optimize distributed dynamic systems or organizations under local and global constraints is a difficult task. Although basic effects of single improvement steps are often known, it is difficult to examine a complex system with conflicting goals, interdependent processes and sideeffects. A special situation occurs, when local entities are supposed to keep autonomy but should be directed by a central instance, to reach a global goal. A concrete example of this optimization problem can be found in health care. The management of modern hospitals has to ensure the quality of service and at the same time work cost efficient. They want to find improvement steps, which on the one hand respect the typical local autonomy of functional units and on the other hand reduce cost factors like the avarage stay duration of patients. Existing tools for modelling and simulation don't provide adequate methodologies and techniques for this problem. Agent based simulation allowes to realize suitable models and finding improvement steps in simulation studies. New approaches and tools are presented and evaluated, that support users in knowledge formalization and model building. KW - Simulation KW - Prozessoptimierung KW - Modellierung KW - Mehragentensystem KW - Krankenhaus KW - Simulation KW - Process Optimization KW - Agentbased System KW - Hospital Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-24483 ER - TY - THES A1 - Klügl, Franziska T1 - Aktivitätsbasierte Verhaltensmodellierung und ihre Unterstützung bei Multiagentensimulationen T1 - "Activity"-based Modelling of Behaviour and its Support for Multi-Agent Simulation N2 - Durch Zusammenführung traditioneller Methoden zur individuenbasierten Simulation und dem Konzept der Multiagentensysteme steht mit der Multiagentensimulation eine Methodik zur Verfügung, die es ermöglicht, sowohl technisch als auch konzeptionell eine neue Ebene an Detaillierung bei Modellbildung und Simulation zu erreichen. Ein Modell beruht dabei auf dem Konzept einer Gesellschaft: Es besteht aus einer Menge interagierender, aber in ihren Entscheidungen autonomen Einheiten, den Agenten. Diese ändern durch ihre Aktionen ihre Umwelt und reagieren ebenso auf die für sie wahrnehmbaren Änderungen in der Umwelt. Durch die Simulation jedes Agenten zusammen mit der Umwelt, in der er "lebt", wird die Dynamik im Gesamtsystem beobachtbar. In der vorliegenden Dissertation wurde ein Repräsentationsschema für Multiagentensimulationen entwickelt werden, das es Fachexperten, wie zum Beispiel Biologen, ermöglicht, selbständig ohne traditionelles Programmieren Multiagentenmodelle zu implementieren und mit diesen Experimente durchzuführen. Dieses deklarative Schema beruht auf zwei Basiskonzepten: Der Körper eines Agenten besteht aus Zustandsvariablen. Das Verhalten des Agenten kann mit Regeln beschrieben werden. Ausgehend davon werden verschiedene Strukturierungsansätze behandelt. Das wichtigste Konzept ist das der "Aktivität", einer Art "Verhaltenszustand": Während der Agent in einer Aktivität A verweilt, führt er die zugehörigen Aktionen aus und dies solange, bis eine Regel feuert, die diese Aktivität beendet und eine neue Aktivität auswählt. Durch Indizierung dieser Regeln bei den zugehörigen Aktivitäten und Einführung von abstrakten Aktivitäten entsteht ein Schema für eine vielfältig strukturierbare Verhaltensbeschreibung. Zu diesem Schema wurde ein Interpreter entwickelt, der ein derartig repräsentiertes Modell ausführt und so Simulationsexperimente mit dem Multiagentenmodell erlaubt. Auf dieser Basis wurde die Modellierungs- und Experimentierumgebung SeSAm ("Shell für Simulierte Agentensysteme") entwickelt. Sie verwendet vorhandene Konzepte aus dem visuellen Programmieren. Mit dieser Umgebung wurden Anwendungsmodelle aus verschiedenen Domänen realisiert: Neben abstrakten Spielbeispielen waren dies vor allem Fragestellungen zu sozialen Insekten, z.B. zum Verhalten von Ameisen, Bienen oder der Interaktion zwischen Bienenvölkern und Milbenpopulationen. N2 - In this thesis a representational scheme for multi-agent simulations was developed. This framework enables domain experts - e.g. biologists - to build models and carry out experiments without having to understand and use traditional programming languages. The resulting declarative framework is based on two concepts: the body of an agent can be modelled by a set of state variables. The behaviour of the agents can be described best by using rules. With this as a starting point various approaches for structuring the description are examined. The most important concept is the concept of "activity" - a kind of "behavioural state": While the agent is in a certain activity A, it carries out the sequence of actions that is associated with A - and continues with it until a rule fires thus terminating the activity A and selecting a new one. By indexing these rules at the activity they are terminating and by introducing abstract activities, a framework for behaviour modelling emerges that can be structured in multifarious ways. An interpreter executing this representation scheme was developed in order to allow simulation experiments with such a multi-agent model. This simulator was integrated into a modelling and simulation environment, named SeSAm ("Shell for Simulated Agent-Systems"). Using this framework several models in different application domains are implemented: They are ranging from simple games to complex models, especially of social insects - e.g. the behaviour of ants or bees or the interactions between bee hives and mite populations. KW - Agent KW - Simulation KW - Computersimulation KW - Mehragentensystem KW - Simulation KW - Modellierung KW - Multiagentensystem KW - Regelbasiertes System KW - Simulation KW - Modelling KW - Multi-agent system KW - Rule-based Systems Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2874 ER - TY - THES A1 - Böhler, Elmar T1 - Algebraic closures in complexity theory T1 - Algebraische Hüllen in der Komplexitätstheorie N2 - We use algebraic closures and structures which are derived from these in complexity theory. We classify problems with Boolean circuits and Boolean constraints according to their complexity. We transfer algebraic structures to structural complexity. We use the generation problem to classify important complexity classes. N2 - Algebraische Hüllen und Strukturen, die mit solchen zusammenhängen, werden für die Komplexitätstheorie genutzt. Es werden Probleme im Zusammenhang mit Booleschen Schaltkreisen und Constraint-Satisfaction Problemen komplexitätstheoretisch klassifiziert. Strukturen aus der Algebra werden auf die Strukturelle Komplexität übertragen. Das Generierungsproblem, wird zur Klassifikation wichtiger Komplexitätsklassen benutzt. KW - Komplexitätstheorie KW - Komplexitätstheorie KW - Clones KW - Generierungsproblem KW - Postsche Klassen KW - Complexity Theory KW - Clones KW - Generation Problem KW - Post's Classes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-16106 ER - TY - JOUR A1 - Kammerer, Klaus A1 - Göster, Manuel A1 - Reichert, Manfred A1 - Pryss, Rüdiger T1 - Ambalytics: a scalable and distributed system architecture concept for bibliometric network analyses JF - Future Internet N2 - A deep understanding about a field of research is valuable for academic researchers. In addition to technical knowledge, this includes knowledge about subareas, open research questions, and social communities (networks) of individuals and organizations within a given field. With bibliometric analyses, researchers can acquire quantitatively valuable knowledge about a research area by using bibliographic information on academic publications provided by bibliographic data providers. Bibliometric analyses include the calculation of bibliometric networks to describe affiliations or similarities of bibliometric entities (e.g., authors) and group them into clusters representing subareas or communities. Calculating and visualizing bibliometric networks is a nontrivial and time-consuming data science task that requires highly skilled individuals. In addition to domain knowledge, researchers must often provide statistical knowledge and programming skills or use software tools having limited functionality and usability. In this paper, we present the ambalytics bibliometric platform, which reduces the complexity of bibliometric network analysis and the visualization of results. It accompanies users through the process of bibliometric analysis and eliminates the need for individuals to have programming skills and statistical knowledge, while preserving advanced functionality, such as algorithm parameterization, for experts. As a proof-of-concept, and as an example of bibliometric analyses outcomes, the calculation of research fronts networks based on a hybrid similarity approach is shown. Being designed to scale, ambalytics makes use of distributed systems concepts and technologies. It is based on the microservice architecture concept and uses the Kubernetes framework for orchestration. This paper presents the initial building block of a comprehensive bibliometric analysis platform called ambalytics, which aims at a high usability for users as well as scalability. KW - system architecture design KW - bibliometric analysis KW - community detection Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-244916 SN - 1999-5903 VL - 13 IS - 8 ER - TY - JOUR A1 - Tsoulias, Nikos A1 - Jörissen, Sven A1 - Nüchter, Andreas T1 - An approach for monitoring temperature on fruit surface by means of thermal point cloud JF - MethodsX N2 - Heat and excessive solar radiation can produce abiotic stresses during apple maturation, resulting fruit quality. Therefore, the monitoring of temperature on fruit surface (FST) over the growing period can allow to identify thresholds, above of which several physiological disorders such as sunburn may occur in apple. The current approaches neglect spatial variation of FST and have reduced repeatability, resulting in unreliable predictions. In this study, LiDAR laser scanning and thermal imaging were employed to detect the temperature on fruit surface by means of 3D point cloud. A process for calibrating the two sensors based on an active board target and producing a 3D thermal point cloud was suggested. After calibration, the sensor system was utilised to scan the fruit trees, while temperature values assigned in the corresponding 3D point cloud were based on the extrinsic calibration. Whereas a fruit detection algorithm was performed to segment the FST from each apple. • The approach allows the calibration of LiDAR laser scanner with thermal camera in order to produce a 3D thermal point cloud. • The method can be applied in apple trees for segmenting FST in 3D. Whereas the approach can be utilised to predict several physiological disorders including sunburn on fruit surface. KW - point cloud KW - thermal point cloud KW - fruit temperature KW - sunburn KW - food quality KW - precision horticulture Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300270 SN - 2215-0161 VL - 9 ER - TY - THES A1 - Jarschel, Michael T1 - An Assessment of Applications and Performance Analysis of Software Defined Networking T1 - Eine Untersuchung von Anwendungen und Leistungsbewertung von Software Defined Networking N2 - With the introduction of OpenFlow by the Stanford University in 2008, a process began in the area of network research, which questions the predominant approach of fully distributed network control. OpenFlow is a communication protocol that allows the externalization of the network control plane from the network devices, such as a router, and to realize it as a logically-centralized entity in software. For this concept, the term "Software Defined Networking" (SDN) was coined during scientific discourse. For the network operators, this concept has several advantages. The two most important can be summarized under the points cost savings and flexibility. Firstly, it is possible through the uniform interface for network hardware ("Southbound API"), as implemented by OpenFlow, to combine devices and software from different manufacturers, which increases the innovation and price pressure on them. Secondly, the realization of the network control plane as a freely programmable software with open interfaces ("Northbound API") provides the opportunity to adapt it to the individual circumstances of the operator's network and to exchange information with the applications it serves. This allows the network to be more flexible and to react more quickly to changing circumstances as well as transport the traffic more effectively and tailored to the user’s "Quality of Experience" (QoE). The approach of a separate network control layer for packet-based networks is not new and has already been proposed several times in the past. Therefore, the SDN approach has raised many questions about its feasibility in terms of efficiency and applicability. These questions are caused to some extent by the fact that there is no generally accepted definition of the SDN concept to date. It is therefore a part of this thesis to derive such a definition. In addition, several of the open issues are investigated. This Investigations follow the three aspects: Performance Evaluation of Software Defined Networking, applications on the SDN control layer, and the usability of SDN Northbound-API for creation application-awareness in network operation. Performance Evaluation of Software Defined Networking: The question of the efficiency of an SDN-based system was from the beginning one of the most important. In this thesis, experimental measurements of the performance of OpenFlow-enabled switch hardware and control software were conducted for the purpose of answering this question. The results of these measurements were used as input parameters for establishing an analytical model of the reactive SDN approach. Through the model it could be determined that the performance of the software control layer, often called "Controller", is crucial for the overall performance of the system, but that the approach is generally viable. Based on this finding a software for analyzing the performance of SDN controllers was developed. This software allows the emulation of the forwarding layer of an SDN network towards the control software and can thus determine its performance in different situations and configurations. The measurements with this software showed that there are quite significant differences in the behavior of different control software implementations. Among other things it has been shown that some show different characteristics for various switches, in particular in terms of message processing speed. Under certain circumstances this can lead to network failures. Applications on the SDN control layer: The core piece of software defined networking are the intelligent network applications that operate on the control layer. However, their development is still in its infancy and little is known about the technical possibilities and their limitations. Therefore, the relationship between an SDN-based and classical implementation of a network function is investigated in this thesis. This function is the monitoring of network links and the traffic they carry. A typical approach for this task has been built based on Wiretapping and specialized measurement hardware and compared with an implementation based on OpenFlow switches and a special SDN control application. The results of the comparison show that the SDN version can compete in terms of measurement accuracy for bandwidth and delay estimation with the traditional measurement set-up. However, a compromise has to be found for measurements below the millisecond range. Another question regarding the SDN control applications is whether and how well they can solve existing problems in networks. Two programs have been developed based on SDN in this thesis to solve two typical network issues. Firstly, the tool "IPOM", which enables considerably more flexibility in the study of effects of network structures for a researcher, who is confined to a fixed physical test network topology. The second software provides an interface between the Cloud Orchestration Software "OpenNebula" and an OpenFlow controller. The purpose of this software was to investigate experimentally whether a pre-notification of the network of an impending relocation of a virtual service in a data center is sufficient to ensure the continuous operation of that service. This was demonstrated on the example of a video service. Usability of the SDN Northbound API for creating application-awareness in network operation: Currently, the fact that the network and the applications that run on it are developed and operated separately leads to problems in network operation. SDN offers with the Northbound-API an open interface that enables the exchange between information of both worlds during operation. One aim of this thesis was to investigate whether this interface can be exploited so that the QoE experienced by the user can be maintained on high level. For this purpose, the QoE influence factors were determined on a challenging application by means of a subjective survey study. The application is cloud gaming, in which the calculation of video game environments takes place in the cloud and is transported via video over the network to the user. It was shown that apart from the most important factor influencing QoS, i.e., packet loss on the downlink, also the type of game type and its speed play a role. This demonstrates that in addition to QoS the application state is important and should be communicated to the network. Since an implementation of such a state conscious SDN for the example of Cloud Gaming was not possible due to its proprietary implementation, in this thesis the application “YouTube video streaming” was chosen as an alternative. For this application, status information is retrievable via the "Yomo" tool and can be used for network control. It was shown that an SDN-based implementation of an application-aware network has distinct advantages over traditional network management methods and the user quality can be obtained in spite of disturbances. N2 - Mit der Vorstellung von OpenFlow durch die Stanford Universität im Jahre 2008 begann ein Prozess im Bereich der Netzwerkforschung, der den vorherrschenden Ansatz der völlig verteilten Netzsteuerung in Frage stellt. Bei OpenFlow handelt es sich um ein Kommunikationsprotokoll, das es ermöglicht die Netzsteuerung aus den Netzwerkgeräten, z. B. einem Router, herauszulösen und als logisch-zentralisierte Einheit als reine Software zu realisieren. Ein Konzept für das im Verlauf des wissenschaftlichen Diskurses der Begriff „Software Defined Networking“ (SDN) geprägt wurde. Für die Betreiber von Netzwerken hat dieses Konzept verschiedene Vorteile. Die beiden wichtigsten lassen sich unter den Punkten Kostenersparnis und Flexibilität zusammenfassen. Zum einen ist es durch die einheitliche Schnittstelle zur Netzwerkhardware („Southbound-API“), wie sie von OpenFlow realisiert wird, möglich Geräte und Software verschiedener Hersteller miteinander zu kombinieren, was den Innovations- und Preisdruck auf diese erhöht. Zum anderen besteht durch die Realisierung der Netzwerksteuerung als frei programmierbare Software mit offenen Schnittstellen („Northbound-API“) die Möglichkeit diese an die individuellen Gegebenheiten des Betreibernetzes anzupassen als auch Informationen mit den Applikationen auszutauschen, die es bedient. Dadurch kann das Netz viel flexibler und schneller auf sich ändernde Gegebenheiten reagieren und den Verkehr effektiver und auf die vom Nutzer erfahrene „Quality of Experience“ (QoE) abgestimmt transportieren. Der Ansatz einer von der Hardware getrennten Netzwerkkontrollschicht für paket-basierte Netze ist nicht neu und wurde in der Vergangenheit bereits mehrfach vorgeschlagen. Daher sah und sieht sich der Ansatz von SDN vielen Fragen nach seiner Realisierbarkeit im Bezug auf Leistungsfähigkeit und Anwendbarkeit gegenüber. Diese Fragen rühren zum Teil auch daher, dass es bis dato keine allgemein anerkannte Definition des SDN Begriffes gibt. Daher ist es ein Teil dieser Doktorarbeit eine solche Definition herzuleiten. Darüber hinaus werden verschiedene der offenen Fragen auf ihre Lösung hin untersucht. Diese Untersuchungen folgen drei Teilaspekten: Leistungsbewertung von Software Defined Networking, Anwendungen auf der SDN Kontrollschicht und die Nutzbarkeit der SDN Northbound-API zum Herstellen eines Applikationsbewusstseins im Netzbetrieb. Leistungsbewertung von Software Defined Networking: Die Frage nach der Leistungsfähigkeit eines SDN-basierten Systems war von Beginn an eine der wichtigsten. In dieser Doktorarbeit wurden zu diesem Zweck experimentelle Messungen zur Leistung OpenFlow-fähiger Switch Hardware und Kontrollsoftware durchgeführt. Die Ergebnisse dieser Messungen dienten als Eingabeparameter zur Aufstellung eines analytischen Modells des reaktiven SDN Ansatzes. Durch das Modell ließ sich bestimmen, dass die Leistungsfähigkeit der Software Kontrollschicht, oft „Controller“ genannt, von entscheidender Bedeutung für die Gesamtleistung des Systems ist, aber der Ansatz insgesamt tragfähig ist. Basierend auf dieser Erkenntnis wurde eine Software zur Analyse der Leistungsfähigkeit von SDN Controllern entwickelt. Diese Software ermöglicht die Emulation der Weiterleitungsschicht eines SDN Netzes gegenüber der Kontrollsoftware und kann so deren Leistungsdaten in verschiedenen Situationen und Konfigurationen bestimmen. Die Messungen mit dieser Software zeigten, dass es durchaus gravierende Unterschiede im Verhalten verschiedener Kontrollsoftware Implementierungen gibt. Unter anderem konnte gezeigt werden, dass einige gegenüber verschiedenen Switches ein unterschiedliches Verhalten aufweisen, insbesondere in der Abarbeitungsgeschwindigkeit von Nachrichten. Ein Umstand der in bestimmten Fällen zu Netzausfällen führen kann. Anwendungen auf der SDN Kontrollschicht: Das Kernstück von Software Defined Networking sind die intelligenten Netzwerkapplikationen, die auf der Kontrollschicht betrieben werden. Allerdings steht deren Entwicklung noch am Anfang und es ist wenig über die technischen Möglichkeiten und deren Grenzen bekannt. Daher wurde in dieser Doktorarbeit der Frage nachgegangen, in welchem Verhältnis sich die Realisierung einer Netzwerkaufgabe mit SDN zur klassischen Umsetzung dieser bewegt. Bei dieser Aufgabe handelt es sich im speziellen um das Monitoring von Links und dem darauf befindlichen Netzwerkverkehr. Hier wurde ein typischer Ansatz für diese Aufgabe basierend auf Wiretapping und spezieller Messhardware aufgebaut und mit einer Implementierung durch OpenFlow Switches und einer speziellen SDN Kontrollapplikation verglichen. Die Ergebnisse des Vergleiches zeigen, dass die SDN Variante im Bezug auf Bandbreiten und Verzögerungsabschätzung durchaus mit dem traditionellen Messaufbau im Bezug auf Messgenauigkeit mithalten kann. Jedoch müssen Abstriche bezüglich der Verzögerungsmessung unterhalb des Millisekundenbereiches gemacht werden. Eine weitere Frage bezüglich der SDN Kontrollapplikationen besteht darin, ob und wie gut sich bestehende Probleme in Netzwerken jetzt mit SDN lösen lassen. Diesbezüglich wurden in dieser Doktorarbeit zwei Programme auf SDN Basis entwickelt, die zwei typische Netzwerkprobleme lösen. Zum einen das Tool „IPOM“, dass es ermöglicht via SDN auf Basis einer festen physikalischen Testnetz-Topologie eine andere zu emulieren und so einem Forscher auf dem Testnetz deutlich mehr Flexibilität bei der Untersuchung von Auswirkungen anderer Netzstrukturen zu ermöglichen. Die zweite Software stellt eine Schnittstelle zwischen der Cloud Orchestration Software „OpenNebula“ und einem OpenFlow Controller dar. Der Zweck dieser Software war es experimentell zu untersuchen, ob eine Vorwarnung des Netzes vor einem bevorstehenden Umzug eines virtuellen Dienstes in einem Datenzentrum hinreichend ist, um den kontinuierlichen Betrieb dieses Dienstes zu gewährleisten. Dieses konnte am Beispiel eines Videodienstes demonstriert werden. Nutzbarkeit der SDN Northbound-API zum Herstellen eines Applikationsbewusstseins im Netzbetrieb: Aktuell führt die Tatsache, dass Netz und Applikationen, die darauf laufen, separat entwickelt und betrieben werden zu Problemen im Netzbetrieb. SDN bietet mit der Northbound-API eine Schnittstelle an, die den Austausch zwischen Informationen beider Welten im Betrieb ermöglicht. Ein Ziel dieser Doktorarbeit war es zu untersuchen, ob sich diese Schnittstelle ausnutzen lässt, so dass die vom Nutzer erfahrene QoE hoch gehalten werden kann. Zu diesem Zwecke wurden zunächst mittels einer subjektiven Umfragestudie die Einflussfaktoren auf eine anspruchsvolle Applikation bestimmt. Bei der Applikation handelt es sich um Cloud Gaming, bei dem die Berechnung der Videospiele Umgebung in der Cloud stattfindet und per Video über das Netz transportiert wird. Hier konnte gezeigt werden, dass neben dem wichtigsten QoS Einflussfaktor Paketverlust auf dem Downlink auch die Art des Spieltyps und dessen Geschwindigkeit eine Rolle spielen. Dies belegt, dass neben QoS auch der Applikationszustand wichtig ist und dem Netz mitgeteilt werden sollte. Da eine Umsetzung eines solchen zustandsbewussten SDNs für das Beispiel Cloud Gaming auf Grund dessen proprietärer Implementierung nicht möglich war, wurde in dieser Doktorarbeit auf die Applikation YouTube Video Streaming ausgewichen. Für diese sind mit Hilfe des Tools „YoMo“ Statusinformationen abfragbar und können zur Netzsteuerung genutzt werden. Es konnte gezeigt werden, dass eine SDN-basierte Realisierung eines applikationsbewussten Netzes deutliche Vorteile gegenüber klassischen Netzwerk Management Methoden aufweist und die Nutzerqualität trotz Störfaktoren erhalten werden kann. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/14 KW - Leistungsbewertung KW - Netzwerk KW - Software Defined Networking KW - Quality of Experience KW - Cloud Gaming KW - Performance Evaluation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-100795 SN - 1432-8801 ER - TY - JOUR A1 - Gageik, Nils A1 - Strohmeier, Michael A1 - Montenegro, Sergio T1 - An Autonomous UAV with an Optical Flow Sensor for Positioning and Navigation JF - International Journal of Advanced Robotic Systems N2 - A procedure to control all six DOF (degrees of freedom) of a UAV (unmanned aerial vehicle) without an external reference system and to enable fully autonomous flight is presented here. For 2D positioning the principle of optical flow is used. Together with the output of height estimation, fusing ultrasonic, infrared and inertial and pressure sensor data, the 3D position of the UAV can be computed, controlled and steered. All data processing is done on the UAV. An external computer with a pathway planning interface is for commanding purposes only. The presented system is part of the AQopterI8 project, which aims to develop an autonomous flying quadrocopter for indoor application. The focus of this paper is 2D positioning using an optical flow sensor. As a result of the performed evaluation, it can be concluded that for position hold, the standard deviation of the position error is 10cm and after landing the position error is about 30cm. KW - Autonomous UAV KW - Quadrocopter KW - Quadrotor KW - Optical Flow KW - positioning KW - navigation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96368 ER - TY - THES A1 - Peng, Dongliang T1 - An Optimization-Based Approach for Continuous Map Generalization T1 - Optimierung für die kontinuierliche Generalisierung von Landkarten N2 - Maps are the main tool to represent geographical information. Geographical information is usually scale-dependent, so users need to have access to maps at different scales. In our digital age, the access is realized by zooming. As discrete changes during the zooming tend to distract users, smooth changes are preferred. This is why some digital maps are trying to make the zooming as continuous as they can. The process of producing maps at different scales with smooth changes is called continuous map generalization. In order to produce maps of high quality, cartographers often take into account additional requirements. These requirements are transferred to models in map generalization. Optimization for map generalization is important not only because it finds optimal solutions in the sense of the models, but also because it helps us to evaluate the quality of the models. Optimization, however, becomes more delicate when we deal with continuous map generalization. In this area, there are requirements not only for a specific map but also for relations between maps at difference scales. This thesis is about continuous map generalization based on optimization. First, we show the background of our research topics. Second, we find optimal sequences for aggregating land-cover areas. We compare the A$^{\!\star}$\xspace algorithm and integer linear programming in completing this task. Third, we continuously generalize county boundaries to provincial boundaries based on compatible triangulations. We morph between the two sets of boundaries, using dynamic programming to compute the correspondence. Fourth, we continuously generalize buildings to built-up areas by aggregating and growing. In this work, we group buildings with the help of a minimum spanning tree. Fifth, we define vertex trajectories that allow us to morph between polylines. We require that both the angles and the edge lengths change linearly over time. As it is impossible to fulfill all of these requirements simultaneously, we mediate between them using least-squares adjustment. Sixth, we discuss the performance of some commonly used data structures for a specific spatial problem. Seventh, we conclude this thesis and present open problems. N2 - Maps are the main tool to represent geographical information. Users often zoom in and out to access maps at different scales. Continuous map generalization tries to make the changes between different scales smooth, which is essential to provide users with comfortable zooming experience. In order to achieve continuous map generalization with high quality, we optimize some important aspects of maps. In this book, we have used optimization in the generalization of land-cover areas, administrative boundaries, buildings, and coastlines. According to our experiments, continuous map generalization indeed benefits from optimization. N2 - Landkarten sind das wichtigste Werkzeug zur Repräsentation geografischer Information. Unter der Generalisierung von Landkarten versteht man die Aufbereitung von geografischen Informationen aus detaillierten Daten zur Generierung von kleinmaßstäbigen Karten. Nutzer von Online-Karten zoomen oft in eine Karte hinein oder aus einer Karte heraus, um mehr Details bzw. mehr Überblick zu bekommen. Die kontinuierliche Generalisierung von Landkarten versucht die Änderungen zwischen verschiedenen Maßstäben stetig zu machen. Dies ist wichtig, um Nutzern eine angenehme Zoom-Erfahrung zu bieten. Um eine qualitativ hochwertige kontinuierliche Generalisierung zu erreichen, kann man wichtige Aspekte bei der Generierung von Online-Karten optimieren. In diesem Buch haben wir Optimierung bei der Generalisierung von Landnutzungskarten, von administrativen Grenzen, Gebäuden und Küstenlinien eingesetzt. Unsere Experimente zeigen, dass die kontinuierliche Generalisierung von Landkarten in der Tat von Optimierung profitiert. KW - land-cover area KW - administrative boundary KW - building KW - morphing KW - data structure KW - zooming KW - Generalisierung KW - Landnutzungskartierung KW - Optimierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174427 SN - 978-3-95826-104-4 SN - 978-3-95826-105-1 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, 978-3-95826-104-4, 24,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - INPR A1 - Dandekar, Thomas T1 - Analysing the phase space of the standard model and its basic four forces from a qubit phase transition perspective: implications for large-scale structure generation and early cosmological events N2 - The phase space for the standard model of the basic four forces for n quanta includes all possible ensemble combinations of their quantum states m, a total of n**m states. Neighbor states reach according to transition possibilities (S-matrix) with emergent time from entropic ensemble gradients. We replace the “big bang” by a condensation event (interacting qubits become decoherent) and inflation by a crystallization event – the crystal unit cell guarantees same symmetries everywhere. Interacting qubits solidify and form a rapidly growing domain where the n**m states become separated ensemble states, rising long-range forces stop ultimately further growth. After that very early events, standard cosmology with the hot fireball model takes over. Our theory agrees well with lack of inflation traces in cosmic background measurements, large-scale structure of voids and filaments, supercluster formation, galaxy formation, dominance of matter and life-friendliness. We prove qubit interactions to be 1,2,4 or 8 dimensional (agrees with E8 symmetry of our universe). Repulsive forces at ultrashort distances result from quantization, long-range forces limit crystal growth. Crystals come and go in the qubit ocean. This selects for the ability to lay seeds for new crystals, for self-organization and life-friendliness. We give energy estimates for free qubits vs bound qubits, misplacements in the qubit crystal and entropy increase during qubit decoherence / crystal formation. Scalar fields for color interaction and gravity derive from the permeating qubit-interaction field. Hence, vacuum energy gets low only inside the qubit crystal. Condensed mathematics may advantageously model free / bound qubits in phase space. KW - phase space KW - cosmology KW - emergent time KW - qubit KW - phase transition KW - bit Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-298580 ER - TY - THES A1 - Hock, David Rogér T1 - Analysis and Optimization of Resilient Routing in Core Communication Networks T1 - Analyse und Optimierung von ausfallsicherem Routing in Kernkommunikationsnetzen N2 - Routing is one of the most important issues in any communication network. It defines on which path packets are transmitted from the source of a connection to the destination. It allows to control the distribution of flows between different locations in the network and thereby is a means to influence the load distribution or to reach certain constraints imposed by particular applications. As failures in communication networks appear regularly and cannot be completely avoided, routing is required to be resilient against such outages, i.e., routing still has to be able to forward packets on backup paths even if primary paths are not working any more. Throughout the years, various routing technologies have been introduced that are very different in their control structure, in their way of working, and in their ability to handle certain failure cases. Each of the different routing approaches opens up their own specific questions regarding configuration, optimization, and inclusion of resilience issues. This monograph investigates, with the example of three particular routing technologies, some concrete issues regarding the analysis and optimization of resilience. It thereby contributes to a better general, technology-independent understanding of these approaches and of their diverse potential for the use in future network architectures. The first considered routing type, is decentralized intra-domain routing based on administrative IP link costs and the shortest path principle. Typical examples are common today's intra-domain routing protocols OSPF and IS-IS. This type of routing includes automatic restoration abilities in case of failures what makes it in general very robust even in the case of severe network outages including several failed components. Furthermore, special IP-Fast Reroute mechanisms allow for a faster reaction on outages. For routing based on link costs, traffic engineering, e.g. the optimization of the maximum relative link load in the network, can be done indirectly by changing the administrative link costs to adequate values. The second considered routing type, MPLS-based routing, is based on the a priori configuration of primary and backup paths, so-called Label Switched Paths. The routing layout of MPLS paths offers more freedom compared to IP-based routing as it is not restricted by any shortest path constraints but any paths can be setup. However, this in general involves a higher configuration effort. Finally, in the third considered routing type, typically centralized routing using a Software Defined Networking (SDN) architecture, simple switches only forward packets according to routing decisions made by centralized controller units. SDN-based routing layouts offer the same freedom as for explicit paths configured using MPLS. In case of a failure, new rules can be setup by the controllers to continue the routing in the reduced topology. However, new resilience issues arise caused by the centralized architecture. If controllers are not reachable anymore, the forwarding rules in the single nodes cannot be adapted anymore. This might render a rerouting in case of connection problems in severe failure scenarios infeasible. N2 - Routing stellt eine der zentralen Aufgaben in Kommunikationsnetzen dar. Es bestimmt darüber, auf welchem Weg Verkehr von der Quelle zum Ziel transportiert wird. Durch geschicktes Routing kann dadurch eine Verteilung der Verkehrsflüsse zum Beispiel zur Lastverteilung erreicht werden. Da Fehler in Kommunikationsnetzen nicht vollständig verhindert werden können, muss Routing insbesondere ausfallsicher sein, d.h., im Falle von Fehlern im Netz muss das Routing weiterhin in der Lage sein, Pakete auf alternativen Pfaden zum Ziel zu transportieren. Es existieren verschiedene gängige Routingverfahren und Technologien, die sich hinsichtlich Ihrer Arbeitsweise, Ihrer Kontrollstrukturen und Ihrer Funktionalität in bestimmten Fehlerszenarien unterscheiden. Für diese verschiedenen Ansätze ergeben sich jeweils eigene Fragestellungen hinsichtlich der Konfiguration, der Optimierung und der Berücksichtigung von Ausfallsicherheit. Diese Doktorarbeit behandelt am Beispiel bestimmter Technologien einige konkrete Fragestellungen zur Analyse und Optimierung der Ausfallsicherheit. Sie liefert damit einen Beitrag zum besseren generellen Verständnis verschiedenartiger Routingansätze und deren unterschiedlichen Potentials für den Einsatz in zukünftigen Netzarchitekturen. Zuerst wird dezentrales Routing behandelt, basierend auf administrativen Linkgewichten und dem Prinzip der kürzesten Pfade, wie es beispielsweise in den Protokollen IS-IS und OSPF genutzt wird. Diese Routingverfahren beinhalteten automatische Rekonvergenz-Mechanismen um im Falle von Fehlern auf der verbleibenden Netzstruktur weiterhin einen Transport von Verkehr zu ermöglichen. Spezielle IP-Fast Reroute Mechanismen ermöglichen zudem eine schnelle Reaktion im Falle von Fehlern. Routing basierend auf Linkgewichten lässt sich nur indirekt durch die Wahl geeigneter Gewichte beeinflussen und optimieren. Die zweite in der Doktorarbeit behandelte Routingart ist MPLS-basiertes Routing, bei dem Labels für Pakete verwendet werden und Pakete anhand sogenannter vorkonfigurierter Label Switched Paths weitergeleitet werden. Diese Technologie bietet mehr Freiheiten bei der Wahl des Pfadlayouts, was aber wiederum im Allgemeinen einen erhöhten Konfigurationsaufwand mit sich bringt. Schließlich greift die Doktorarbeit auch das Routing in SDN Netzen auf. Dort erfolgt eine Trennung von Control Plane und Data Plane, so dass einzelne dedizierte Controller die Routingentscheidungen festlegen und ansonsten einfache Switches mit reduzierter Komplexität den Verkehr lediglich entsprechend der festgelegten Regeln weiterleiten. Dies ermöglicht die größte Freiheit bei der Konfiguration des Routing bringt aber wiederum neue Fragestellungen bedingt durch die zentralen Kontrolleinheiten mit sich. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/14 KW - Leistungsbewertung KW - Verteiltes System KW - Routing KW - Netzwerk KW - Optimization KW - Routing KW - Software Defined Networking KW - Optimierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101681 SN - 1432-8801 ER - TY - JOUR A1 - Greubel, André A1 - Andres, Daniela A1 - Hennecke, Martin T1 - Analyzing reporting on ransomware incidents: a case study JF - Social Sciences N2 - Knowledge about ransomware is important for protecting sensitive data and for participating in public debates about suitable regulation regarding its security. However, as of now, this topic has received little to no attention in most school curricula. As such, it is desirable to analyze what citizens can learn about this topic outside of formal education, e.g., from news articles. This analysis is both relevant to analyzing the public discourse about ransomware, as well as to identify what aspects of this topic should be included in the limited time available for this topic in formal education. Thus, this paper was motivated both by educational and media research. The central goal is to explore how the media reports on this topic and, additionally, to identify potential misconceptions that could stem from this reporting. To do so, we conducted an exploratory case study into the reporting of 109 media articles regarding a high-impact ransomware event: the shutdown of the Colonial Pipeline (located in the east of the USA). We analyzed how the articles introduced central terminology, what details were provided, what details were not, and what (mis-)conceptions readers might receive from them. Our results show that an introduction of the terminology and technical concepts of security is insufficient for a complete understanding of the incident. Most importantly, the articles may lead to four misconceptions about ransomware that are likely to lead to misleading conclusions about the responsibility for the incident and possible political and technical options to prevent such attacks in the future. KW - media analysis KW - informal education KW - IT security KW - ransomware KW - misconceptions Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313746 SN - 2076-0760 VL - 12 IS - 5 ER - TY - JOUR A1 - Zirkel, J. A1 - Cecil, A. A1 - Schäfer, F. A1 - Rahlfs, S. A1 - Ouedraogo, A. A1 - Xiao, K. A1 - Sawadogo, S. A1 - Coulibaly, B. A1 - Becker, K. A1 - Dandekar, T. T1 - Analyzing Thiol-Dependent Redox Networks in the Presence of Methylene Blue and Other Antimalarial Agents with RT-PCR-Supported in silico Modeling JF - Bioinformatics and Biology Insights N2 - BACKGROUND: In the face of growing resistance in malaria parasites to drugs, pharmacological combination therapies are important. There is accumulating evidence that methylene blue (MB) is an effective drug against malaria. Here we explore the biological effects of both MB alone and in combination therapy using modeling and experimental data. RESULTS: We built a model of the central metabolic pathways in P. falciparum. Metabolic flux modes and their changes under MB were calculated by integrating experimental data (RT-PCR data on mRNAs for redox enzymes) as constraints and results from the YANA software package for metabolic pathway calculations. Several different lines of MB attack on Plasmodium redox defense were identified by analysis of the network effects. Next, chloroquine resistance based on pfmdr/and pfcrt transporters, as well as pyrimethamine/sulfadoxine resistance (by mutations in DHF/DHPS), were modeled in silico. Further modeling shows that MB has a favorable synergism on antimalarial network effects with these commonly used antimalarial drugs. CONCLUSIONS: Theoretical and experimental results support that methylene blue should, because of its resistance-breaking potential, be further tested as a key component in drug combination therapy efforts in holoendemic areas. KW - methylene blue KW - malaria KW - elementary mode analysis KW - drug KW - resistance KW - combination therapy KW - pathway KW - metabolic flux Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-123751 N1 - This is an open access article. Unrestricted non-commercial use is permitted provided the original work is properly cited. VL - 6 ER - TY - THES A1 - Kindermann, Philipp T1 - Angular Schematization in Graph Drawing N2 - Graphs are a frequently used tool to model relationships among entities. A graph is a binary relation between objects, that is, it consists of a set of objects (vertices) and a set of pairs of objects (edges). Networks are common examples of modeling data as a graph. For example, relationships between persons in a social network, or network links between computers in a telecommunication network can be represented by a graph. The clearest way to illustrate the modeled data is to visualize the graphs. The field of Graph Drawing deals with the problem of finding algorithms to automatically generate graph visualizations. The task is to find a "good" drawing, which can be measured by different criteria such as number of crossings between edges or the used area. In this thesis, we study Angular Schematization in Graph Drawing. By this, we mean drawings with large angles (for example, between the edges at common vertices or at crossing points). The thesis consists of three parts. First, we deal with the placement of boxes. Boxes are axis-parallel rectangles that can, for example, contain text. They can be placed on a map to label important sites, or can be used to describe semantic relationships between words in a word network. In the second part of the thesis, we consider graph drawings visually guide the viewer. These drawings generally induce large angles between edges that meet at a vertex. Furthermore, the edges are drawn crossing-free and in a way that makes them easy to follow for the human eye. The third and final part is devoted to crossings with large angles. In drawings with crossings, it is important to have large angles between edges at their crossing point, preferably right angles. N2 - Graphen sind häufig verwendete Werkzeuge zur Modellierung von Zusammenhängen zwischen Daten. Ein Graph ist eine binäre Relation zwischen Objekten, das heißt er besteht aus einer Menge von Objekten (Knoten) und einer Menge von Paaren von Objekten (Kanten). Netzwerke sind übliche Beispiele für das Modellieren von Daten als ein Graph. Beispielsweise lassen sich Beziehungen zwischen Personen in einem sozialen Netzwerk oder Netzanbindungen zwischen Computern in einem Telekommunikationsnetz als Graph darstellen. Die modellierten Daten können am anschaulichsten dargestellt werden, indem man die Graphen visualisiert. Der Bereich des Graphenzeichnens behandelt das Problem, Algorithmen zum automatischen Erzeugen von Graphenvisualisierungen zu finden. Das Ziel ist es, eine "gute" Zeichnung zu finden, was durch unterschiedliche Kriterien gemessen werden kann; zum Beispiel durch die Anzahl der Kreuzungen zwischen Kanten oder durch den Platzverbrauch. In dieser Arbeit beschäftigen wir uns mit Winkelschematisierung im Graphenzeichnen. Darunter verstehen wir Zeichnungen, in denen die Winkel (zum Beispiel zwischen Kanten an einem gemeinsamen Knoten oder einem Kreuzungspunkt) möglichst groß gestaltet sind. Die Arbeit besteht aus drei Teilen. Im ersten Teil betrachten wir die Platzierung von Boxen. Boxen sind achsenparallele Rechtecke, die zum Beispiel Text enthalten. Sie können beispielsweise auf einer Karte platziert werden, um wichtige Standorte zu beschriften, oder benutzt werden, um semantische Beziehungen zwischen Wörtern in einem Wortnetzwerk darzustellen. Im zweiten Teil der Arbeit untersuchen wir Graphenzeichnungen, die den Betrachter visuell führen. Im Allgemeinen haben diese Zeichnungen große Winkel zwischen Kanten, die sich in einem Knoten treffen. Außerdem werden die Verbindungen kreuzungsfrei und so gezeichnet, dass es dem menschlichen Auge leicht fällt, ihnen zu folgen. Im dritten und letzten Teil geht es um Kreuzungen mit großen Winkeln. In Zeichnungen mit Kreuzungen ist es wichtig, dass die Winkel zwischen Kanten an Kreuzungspunkten groß sind, vorzugsweise rechtwinklig. KW - graph drawing KW - angular schematization KW - boundary labeling KW - contact representation KW - word clouds KW - monotone drawing KW - smooth orthogonal drawing KW - simultaneous embedding KW - right angle crossing KW - independent crossing KW - Graphenzeichnen KW - Winkel KW - Kreuzung KW - v Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-112549 SN - 978-3-95826-020-7 (print) SN - 978-3-95826-021-4 (online) PB - Würzburg University Press CY - Würzburg ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Assisting Analysis and Understanding of Quran Search Results with Interactive Scatter Plots and Tables N2 - The Quran is the holy book of Islam consisting of 6236 verses divided into 114 chapters called suras. Many verses are similar and even identical. Searching for similar texts (e.g verses) could return thousands of verses, that when displayed completely or partly as textual list would make analysis and understanding difficult and confusing. Moreover it would be visually impossible to instantly figure out the overall distribution of the retrieved verses in the Quran. As consequence reading and analyzing the verses would be tedious and unintuitive. In this study a combination of interactive scatter plots and tables has been developed to assist analysis and understanding of the search result. Retrieved verses are clustered by chapters, and a weight is assigned to each cluster according to number of verses it contains, so that users could visually identify most relevant areas, and figure out the places of revelation of the verses. Users visualize the complete result and can select a region of the plot to zoom in, click on a marker to display a table containing verses with English translation side by side. KW - Text Mining KW - Visualisierung KW - Koran KW - Information Visualization KW - Visual Text Mining KW - Scatter Plot KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55840 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Assisting Understanding, Retention, and Dissemination of Religious Texts Knowledge with Modeling, and Visualization Techniques: The Case of The Quran N2 - Learning a book in general involves reading it, underlining important words, adding comments, summarizing some passages, and marking up some text or concepts. Once deeper understanding is achieved, one would like to organize and manage her/his knowledge in such a way that, it could be easily remembered and efficiently transmitted to others. In this paper, books organized in terms of chapters consisting of verses, are considered as the source of knowledge to be modeled. The knowledge model consists of verses with their metadata and semantic annotations. The metadata represent the multiple perspectives of knowledge modeling. Verses with their metadata and annotations form a meta-model, which will be published on a web Mashup. The meta-model with linking between its elements constitute a knowledge base. An XML-based annotation system breaking down the learning process into specific tasks, helps constructing the desired meta-model. The system is made up of user interfaces for creating metadata, annotating chapters’ contents according to user selected semantics, and templates for publishing the generated knowledge on the Internet. The proposed software system improves comprehension and retention of knowledge contained in religious texts through modeling and visualization. The system has been applied to the Quran, and the result obtained shows that multiple perspectives of information modeling can be successfully applied to religious texts. It is expected that this short ongoing study would motivate others to engage in devising and offering software systems for cross-religions learning. KW - Wissensmanagement KW - Koran KW - Knowledge Modeling KW - Meta-model KW - Knowledge Management KW - Content Management KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55927 ER - TY - JOUR A1 - Mandel, Alexander A1 - Hörnlein, Alexander A1 - Ifland, Marianus A1 - Lüneburg, Edeltraud A1 - Deckert, Jürgen A1 - Puppe, Frank T1 - Aufwandsanalyse für computerunterstützte Multiple-Choice Papierklausuren T1 - Cost analysis for computer supported multiple-choice paper examinations JF - GMS Journal for Medical Education N2 - Introduction: Multiple-choice-examinations are still fundamental for assessment in medical degree programs. In addition to content related research, the optimization of the technical procedure is an important question. Medical examiners face three options: paper-based examinations with or without computer support or completely electronic examinations. Critical aspects are the effort for formatting, the logistic effort during the actual examination, quality, promptness and effort of the correction, the time for making the documents available for inspection by the students, and the statistical analysis of the examination results. Methods: Since three semesters a computer program for input and formatting of MC-questions in medical and other paper-based examinations is used and continuously improved at Wuerzburg University. In the winter semester (WS) 2009/10 eleven, in the summer semester (SS) 2010 twelve and in WS 2010/11 thirteen medical examinations were accomplished with the program and automatically evaluated. For the last two semesters the remaining manual workload was recorded. Results: The cost of the formatting and the subsequent analysis including adjustments of the analysis of an average examination with about 140 participants and about 35 questions was 5-7 hours for exams without complications in the winter semester 2009/2010, about 2 hours in SS 2010 and about 1.5 hours in the winter semester 2010/11. Including exams with complications, the average time was about 3 hours per exam in SS 2010 and 2.67 hours for the WS 10/11. Discussion: For conventional multiple-choice exams the computer-based formatting and evaluation of paper-based exams offers a significant time reduction for lecturers in comparison with the manual correction of paper-based exams and compared to purely electronically conducted exams it needs a much simpler technological infrastructure and fewer staff during the exam." N2 - Einleitung: Multiple-Choice-Klausuren spielen immer noch eine herausragende Rolle für fakultätsinterne medizinische Prüfungen. Neben inhaltlichen Arbeiten stellt sich die Frage, wie die technische Abwicklung optimiert werden kann. Für Dozenten in der Medizin gibt es zunehmend drei Optionen zur Durchführung von MC-Klausuren: Papierklausuren mit oder ohne Computerunterstützung oder vollständig elektronische Klausuren. Kritische Faktoren sind der Aufwand für die Formatierung der Klausur, der logistische Aufwand bei der Klausurdurchführung, die Qualität, Schnelligkeit und der Aufwand der Klausurkorrektur, die Bereitstellung der Dokumente für die Einsichtnahme, und die statistische Analyse der Klausurergebnisse. Methoden: An der Universität Würzburg wird seit drei Semestern ein Computerprogramm zur Eingabe und Formatierung der MC-Fragen in medizinischen und anderen Papierklausuren verwendet und optimiert, mit dem im Wintersemester (WS) 2009/2010 elf, im Sommersemester (SS) 2010 zwölf und im WS 2010/11 dreizehn medizinische Klausuren erstellt und anschließend die eingescannten Antwortblätter automatisch ausgewertet wurden. In den letzten beiden Semestern wurden die Aufwände protokolliert. Ergebnisse: Der Aufwand der Formatierung und der Auswertung einschl. nachträglicher Anpassung der Auswertung einer Durchschnittsklausur mit ca. 140 Teilnehmern und ca. 35 Fragen ist von 5-7 Stunden für Klausuren ohne Komplikation im WS 2009/2010 über ca. 2 Stunden im SS 2010 auf ca. 1,5 Stunden im WS 2010/11 gefallen. Einschließlich der Klausuren mit Komplikationen bei der Auswertung betrug die durchschnittliche Zeit im SS 2010 ca. 3 Stunden und im WS 10/11 ca. 2,67 Stunden pro Klausur. Diskussion: Für konventionelle Multiple-Choice-Klausuren bietet die computergestützte Formatierung und Auswertung von Papierklausuren einen beträchtlichen Zeitvorteil für die Dozenten im Vergleich zur manuellen Korrektur von Papierklausuren und benötigt im Vergleich zu rein elektronischen Klausuren eine deutlich einfachere technische Infrastruktur und weniger Personal bei der Klausurdurchführung. KW - Multiple-Choice Prüfungen KW - Automatisierte Prüfungskorrektur KW - Aufwandsanalyse KW - Educational Measurement (I2.399) KW - Self-Evaluation Programs (I2.399.780) KW - Multiple-Choice Examination KW - Cost Analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134386 VL - 28 IS - 4 ER - TY - JOUR A1 - Wolff, Alexander A1 - Rutter, Iganz T1 - Augmenting the Connectivity of Planar and Geometric Graphs JF - Journal of Graph Algorithms and Applications N2 - In this paper we study connectivity augmentation problems. Given a connected graph G with some desirable property, we want to make G 2-vertex connected (or 2-edge connected) by adding edges such that the resulting graph keeps the property. The aim is to add as few edges as possible. The property that we consider is planarity, both in an abstract graph-theoretic and in a geometric setting, where vertices correspond to points in the plane and edges to straight-line segments. We show that it is NP-hard to � nd a minimum-cardinality augmentation that makes a planar graph 2-edge connected. For making a planar graph 2-vertex connected this was known. We further show that both problems are hard in the geometric setting, even when restricted to trees. The problems remain hard for higher degrees of connectivity. On the other hand we give polynomial-time algorithms for the special case of convex geometric graphs. We also study the following related problem. Given a planar (plane geometric) graph G, two vertices s and t of G, and an integer c, how many edges have to be added to G such that G is still planar (plane geometric) and contains c edge- (or vertex-) disjoint s{t paths? For the planar case we give a linear-time algorithm for c = 2. For the plane geometric case we give optimal worst-case bounds for c = 2; for c = 3 we characterize the cases that have a solution. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-97587 ER - TY - JOUR A1 - Becker, Martin A1 - Caminiti, Saverio A1 - Fiorella, Donato A1 - Francis, Louise A1 - Gravino, Pietro A1 - Haklay, Mordechai (Muki) A1 - Hotho, Andreas A1 - Loreto, Virrorio A1 - Mueller, Juergen A1 - Ricchiuti, Ferdinando A1 - Servedio, Vito D. P. A1 - Sirbu, Alina A1 - Tria, Franesca T1 - Awareness and Learning in Participatory Noise Sensing JF - PLOS ONE N2 - The development of ICT infrastructures has facilitated the emergence of new paradigms for looking at society and the environment over the last few years. Participatory environmental sensing, i.e. directly involving citizens in environmental monitoring, is one example, which is hoped to encourage learning and enhance awareness of environmental issues. In this paper, an analysis of the behaviour of individuals involved in noise sensing is presented. Citizens have been involved in noise measuring activities through the WideNoise smartphone application. This application has been designed to record both objective (noise samples) and subjective (opinions, feelings) data. The application has been open to be used freely by anyone and has been widely employed worldwide. In addition, several test cases have been organised in European countries. Based on the information submitted by users, an analysis of emerging awareness and learning is performed. The data show that changes in the way the environment is perceived after repeated usage of the application do appear. Specifically, users learn how to recognise different noise levels they are exposed to. Additionally, the subjective data collected indicate an increased user involvement in time and a categorisation effect between pleasant and less pleasant environments. KW - exposure Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-127675 SN - 1932-6203 VL - 8 IS - 12 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Döllinger, Nina A1 - Hein, Rebecca T1 - Behavioral Framework of Immersive Technologies (BehaveFIT): How and why virtual reality can support behavioral change processes JF - Frontiers in Virtual Reality N2 - The design and evaluation of assisting technologies to support behavior change processes have become an essential topic within the field of human-computer interaction research in general and the field of immersive intervention technologies in particular. The mechanisms and success of behavior change techniques and interventions are broadly investigated in the field of psychology. However, it is not always easy to adapt these psychological findings to the context of immersive technologies. The lack of theoretical foundation also leads to a lack of explanation as to why and how immersive interventions support behavior change processes. The Behavioral Framework for immersive Technologies (BehaveFIT) addresses this lack by 1) presenting an intelligible categorization and condensation of psychological barriers and immersive features, by 2) suggesting a mapping that shows why and how immersive technologies can help to overcome barriers and finally by 3) proposing a generic prediction path that enables a structured, theory-based approach to the development and evaluation of immersive interventions. These three steps explain how BehaveFIT can be used, and include guiding questions for each step. Further, two use cases illustrate the usage of BehaveFIT. Thus, the present paper contributes to guidance for immersive intervention design and evaluation, showing that immersive interventions support behavior change processes and explain and predict 'why' and 'how' immersive interventions can bridge the intention-behavior-gap. KW - immersive technologies KW - behavior change KW - intervention design KW - intervention evaluation KW - framework KW - virtual reality KW - intention-behavior-gap KW - human-computer interaction Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258796 VL - 2 ER - TY - INPR A1 - Dandekar, Thomas T1 - Biological heuristics applied to cosmology suggests a condensation nucleus as start of our universe and inflation cosmology replaced by a period of rapid Weiss domain-like crystal growth N2 - Cosmology often uses intricate formulas and mathematics to derive new theories and concepts. We do something different in this paper: We look at biological processes and derive from these heuristics so that the revised cosmology agrees with astronomical observations but does also agree with standard biological observations. We show that we then have to replace any type of singularity at the start of the universe by a condensation nucleus and that the very early period of the universe usually assumed to be inflation has to be replaced by a period of rapid crystal growth as in Weiss magnetization domains. Impressively, these minor modifications agree well with astronomical observations including removing the strong inflation perturbations which were never observed in the recent BICEP2 experiments. Furthermore, looking at biological principles suggests that such a new theory with a condensation nucleus at start and a first rapid phase of magnetization-like growth of the ordered, physical laws obeying lattice we live in is in fact the only convincing theory of the early phases of our universe that also is compatible with current observations. We show in detail in the following that such a process of crystal creation, breaking of new crystal seeds and ultimate evaporation of the present crystal readily leads over several generations to an evolution and selection of better, more stable and more self-organizing crystals. Moreover, this explains the “fine-tuning” question why our universe is fine-tuned to favor life: Our Universe is so self-organizing to have enough offspring and the detailed physics involved is at the same time highly favorable for all self-organizing processes including life. This biological theory contrasts with current standard inflation cosmologies. The latter do not perform well in explaining any phenomena of sophisticated structure creation or self-organization. As proteins can only thermodynamically fold by increasing the entropy in the solution around them we suggest for cosmology a condensation nucleus for a universe can form only in a “chaotic ocean” of string-soup or quantum foam if the entropy outside of the nucleus rapidly increases. We derive an interaction potential for 1 to n-dimensional strings or quantum-foams and show that they allow only 1D, 2D, 4D or octonion interactions. The latter is the richest structure and agrees to the E8 symmetry fundamental to particle physics and also compatible with the ten dimensional string theory E8 which is part of the M-theory. Interestingly, any other interactions of other dimensionality can be ruled out using Hurwitz compositional theorem. Crystallization explains also extremely well why we have only one macroscopic reality and where the worldlines of alternative trajectories exist: They are in other planes of the crystal and for energy reasons they crystallize mostly at the same time, yielding a beautiful and stable crystal. This explains decoherence and allows to determine the size of Planck´s quantum h (very small as separation of crystal layers by energy is extremely strong). Ultimate dissolution of real crystals suggests an explanation for dark energy agreeing with estimates for the “big rip”. The halo distribution of dark matter favoring galaxy formation is readily explained by a crystal seed starting with unit cells made of normal and dark matter. That we have only matter and not antimatter can be explained as there may be right handed mattercrystals and left-handed antimatter crystals. Similarly, real crystals are never perfect and we argue that exactly such irregularities allow formation of galaxies, clusters and superclusters. Finally, heuristics from genetics suggest to look for a systems perspective to derive correct vacuum and Higgs Boson energies. KW - heuristics KW - inflation KW - cosmology KW - crystallization KW - crystal growth KW - E8 symmetry KW - Hurwitz theorem KW - evolution KW - Lee Smolin Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-183945 ER - TY - JOUR A1 - Pfitzner, Christian A1 - May, Stefan A1 - Nüchter, Andreas T1 - Body weight estimation for dose-finding and health monitoring of lying, standing and walking patients based on RGB-D data JF - Sensors N2 - This paper describes the estimation of the body weight of a person in front of an RGB-D camera. A survey of different methods for body weight estimation based on depth sensors is given. First, an estimation of people standing in front of a camera is presented. Second, an approach based on a stream of depth images is used to obtain the body weight of a person walking towards a sensor. The algorithm first extracts features from a point cloud and forwards them to an artificial neural network (ANN) to obtain an estimation of body weight. Besides the algorithm for the estimation, this paper further presents an open-access dataset based on measurements from a trauma room in a hospital as well as data from visitors of a public event. In total, the dataset contains 439 measurements. The article illustrates the efficiency of the approach with experiments with persons lying down in a hospital, standing persons, and walking persons. Applicable scenarios for the presented algorithm are body weight-related dosing of emergency patients. KW - RGB-D KW - human body weight KW - image processing KW - kinect KW - machine learning KW - perception KW - segmentation KW - sensor fusion KW - stroke KW - thermal camera Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176642 VL - 18 IS - 5 ER - TY - JOUR A1 - Kirikkayis, Yusuf A1 - Gallik, Florian A1 - Winter, Michael A1 - Reichert, Manfred T1 - BPMNE4IoT: a framework for modeling, executing and monitoring IoT-driven processes JF - Future Internet N2 - The Internet of Things (IoT) enables a variety of smart applications, including smart home, smart manufacturing, and smart city. By enhancing Business Process Management Systems with IoT capabilities, the execution and monitoring of business processes can be significantly improved. Providing a holistic support for modeling, executing and monitoring IoT-driven processes, however, constitutes a challenge. Existing process modeling and process execution languages, such as BPMN 2.0, are unable to fully meet the IoT characteristics (e.g., asynchronicity and parallelism) of IoT-driven processes. In this article, we present BPMNE4IoT—A holistic framework for modeling, executing and monitoring IoT-driven processes. We introduce various artifacts and events based on the BPMN 2.0 metamodel that allow realizing the desired IoT awareness of business processes. The framework is evaluated along two real-world scenarios from two different domains. Moreover, we present a user study for comparing BPMNE4IoT and BPMN 2.0. In particular, this study has confirmed that the BPMNE4IoT framework facilitates the support of IoT-driven processes. KW - IoT KW - BPM KW - BPMN KW - IoT-driven processes Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-304097 SN - 1999-5903 VL - 15 IS - 3 ER - TY - JOUR A1 - Lugrin, Jean-Luc A1 - Latoschik, Marc Erich A1 - Habel, Michael A1 - Roth, Daniel A1 - Seufert, Christian A1 - Grafe, Silke T1 - Breaking Bad Behaviors: A New Tool for Learning Classroom Management Using Virtual Reality JF - Frontiers in ICT N2 - This article presents an immersive virtual reality (VR) system for training classroom management skills, with a specific focus on learning to manage disruptive student behavior in face-to-face, one-to-many teaching scenarios. The core of the system is a real-time 3D virtual simulation of a classroom populated by twenty-four semi-autonomous virtual students. The system has been designed as a companion tool for classroom management seminars in a syllabus for primary and secondary school teachers. This will allow lecturers to link theory with practice using the medium of VR. The system is therefore designed for two users: a trainee teacher and an instructor supervising the training session. The teacher is immersed in a real-time 3D simulation of a classroom by means of a head-mounted display and headphone. The instructor operates a graphical desktop console, which renders a view of the class and the teacher whose avatar movements are captured by a marker less tracking system. This console includes a 2D graphics menu with convenient behavior and feedback control mechanisms to provide human-guided training sessions. The system is built using low-cost consumer hardware and software. Its architecture and technical design are described in detail. A first evaluation confirms its conformance to critical usability requirements (i.e., safety and comfort, believability, simplicity, acceptability, extensibility, affordability, and mobility). Our initial results are promising and constitute the necessary first step toward a possible investigation of the efficiency and effectiveness of such a system in terms of learning outcomes and experience. KW - virtual reality training KW - immersive classroom management KW - immersive classroom KW - virtual agent interaction KW - student simulation Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-147945 VL - 3 IS - 26 ER - TY - JOUR A1 - Döllinger, Nina A1 - Wienrich, Carolin A1 - Latoschik, Marc Erich T1 - Challenges and opportunities of immersive technologies for mindfulness meditation: a systematic review JF - Frontiers in Virtual Reality N2 - Mindfulness is considered an important factor of an individual's subjective well-being. Consequently, Human-Computer Interaction (HCI) has investigated approaches that strengthen mindfulness, i.e., by inventing multimedia technologies to support mindfulness meditation. These approaches often use smartphones, tablets, or consumer-grade desktop systems to allow everyday usage in users' private lives or in the scope of organized therapies. Virtual, Augmented, and Mixed Reality (VR, AR, MR; in short: XR) significantly extend the design space for such approaches. XR covers a wide range of potential sensory stimulation, perceptive and cognitive manipulations, content presentation, interaction, and agency. These facilities are linked to typical XR-specific perceptions that are conceptually closely related to mindfulness research, such as (virtual) presence and (virtual) embodiment. However, a successful exploitation of XR that strengthens mindfulness requires a systematic analysis of the potential interrelation and influencing mechanisms between XR technology, its properties, factors, and phenomena and existing models and theories of the construct of mindfulness. This article reports such a systematic analysis of XR-related research from HCI and life sciences to determine the extent to which existing research frameworks on HCI and mindfulness can be applied to XR technologies, the potential of XR technologies to support mindfulness, and open research gaps. Fifty papers of ACM Digital Library and National Institutes of Health's National Library of Medicine (PubMed) with and without empirical efficacy evaluation were included in our analysis. The results reveal that at the current time, empirical research on XR-based mindfulness support mainly focuses on therapy and therapeutic outcomes. Furthermore, most of the currently investigated XR-supported mindfulness interactions are limited to vocally guided meditations within nature-inspired virtual environments. While an analysis of empirical research on those systems did not reveal differences in mindfulness compared to non-mediated mindfulness practices, various design proposals illustrate that XR has the potential to provide interactive and body-based innovations for mindfulness practice. We propose a structured approach for future work to specify and further explore the potential of XR as mindfulness-support. The resulting framework provides design guidelines for XR-based mindfulness support based on the elements and psychological mechanisms of XR interactions. KW - virtual reality KW - augmented reality KW - mindfulness KW - XR KW - meditation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259047 VL - 2 ER - TY - RPRT A1 - Nguyen, Kien A1 - Loh, Frank A1 - Hoßfeld, Tobias T1 - Challenges of Serverless Deployment in Edge-MEC-Cloud T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The emerging serverless computing may meet Edge Cloud in a beneficial manner as the two offer flexibility and dynamicity in optimizing finite hardware resources. However, the lack of proper study of a joint platform leaves a gap in literature about consumption and performance of such integration. To this end, this paper identifies the key questions and proposes a methodology to answer them. KW - Edge-MEC-Cloud Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322025 ER - TY - THES A1 - Ullmann, Tobias T1 - Characterization of Arctic Environment by Means of Polarimetric Synthetic Aperture Radar (PolSAR) Data and Digital Elevation Models (DEM) T1 - Charakterisierung der arktischen Landoberfläche mittels polarimetrischer Radardaten (PolSAR) und digitalen Höhenmodellen (DEM) N2 - The ecosystem of the high northern latitudes is affected by the recently changing environmental conditions. The Arctic has undergone a significant climatic change over the last decades. The land coverage is changing and a phenological response to the warming is apparent. Remotely sensed data can assist the monitoring and quantification of these changes. The remote sensing of the Arctic was predominantly carried out by the usage of optical sensors but these encounter problems in the Arctic environment, e.g. the frequent cloud cover or the solar geometry. In contrast, the imaging of Synthetic Aperture Radar is not affected by the cloud cover and the acquisition of radar imagery is independent of the solar illumination. The objective of this work was to explore how polarimetric Synthetic Aperture Radar (PolSAR) data of TerraSAR-X, TanDEM-X, Radarsat-2 and ALOS PALSAR and interferometric-derived digital elevation model data of the TanDEM-X Mission can contribute to collect meaningful information on the actual state of the Arctic Environment. The study was conducted for Canadian sites of the Mackenzie Delta Region and Banks Island and in situ reference data were available for the assessment. The up-to-date analysis of the PolSAR data made the application of the Non-Local Means filtering and of the decomposition of co-polarized data necessary. The Non-Local Means filter showed a high capability to preserve the image values, to keep the edges and to reduce the speckle. This supported not only the suitability for the interpretation but also for the classification. The classification accuracies of Non-Local Means filtered data were in average +10% higher compared to unfiltered images. The correlation of the co- and quad-polarized decomposition features was high for classes with distinct surface or double bounce scattering and a usage of the co-polarized data is beneficial for regions of natural land coverage and for low vegetation formations with little volume scattering. The evaluation further revealed that the X- and C-Band were most sensitive to the generalized land cover classes. It was found that the X-Band data were sensitive to low vegetation formations with low shrub density, the C-Band data were sensitive to the shrub density and the shrub dominated tundra. In contrast, the L-Band data were less sensitive to the land cover. Among the different dual-polarized data the HH/VV-polarized data were identified to be most meaningful for the characterization and classification, followed by the HH/HV-polarized and the VV/VH-polarized data. The quad-polarized data showed highest sensitivity to the land cover but differences to the co-polarized data were small. The accuracy assessment showed that spectral information was required for accurate land cover classification. The best results were obtained when spectral and radar information was combined. The benefit of including radar data in the classification was up to +15% accuracy and most significant for the classes wetland and sparse vegetated tundra. The best classifications were realized with quad-polarized C-Band and multispectral data and with co-polarized X-Band and multispectral data. The overall accuracy was up to 80% for unsupervised and up to 90% for supervised classifications. The results indicated that the shortwave co-polarized data show promise for the classification of tundra land cover since the polarimetric information is sensitive to low vegetation and the wetlands. Furthermore, co-polarized data provide a higher spatial resolution than the quad-polarized data. The analysis of the intermediate digital elevation model data of the TanDEM-X showed a high potential for the characterization of the surface morphology. The basic and relative topographic features were shown to be of high relevance for the quantification of the surface morphology and an area-wide application is feasible. In addition, these data were of value for the classification and delineation of landforms. Such classifications will assist the delineation of geomorphological units and have potential to identify locations of actual and future morphologic activity. N2 - Die polaren Regionen der Erde zeigen eine hohe Sensitivität gegenüber dem aktuell stattfindenden klimatischen Wandel. Für den Raum der Arktis wurde eine signifikante Erwärmung der Landoberfläche beobachtet und zukünftige Prognosen zeigen einen positiven Trend der Temperaturentwicklung. Die Folgen für das System sind tiefgehend, zahlreich und zeigen sich bereits heute - beispielsweise in einer Zunahme der photosynthetischen Aktivität und einer Verstärkung der geomorphologischen Dynamik. Durch satellitengestützte Fernerkundungssysteme steht ein Instrumentarium bereit, welches in der Lage ist, solch großflächigen und aktuellen Änderungen der Landoberfläche nachzuzeichnen und zu quantifizieren. Insbesondere optische Systeme haben in den vergangen Jahren ihre hohe Anwendbarkeit für die kontinuierliche Beobachtung und Quantifizierung von Änderungen bewiesen, bzw. durch sie ist ein Erkennen der Änderungen erst ermöglicht worden. Der Nutzen von optischen Systemen für die Beobachtung der arktischen Landoberfläche wird dabei aber durch die häufige Beschattung durch Wolken und die Beleuchtungsgeometrie erschwert, bzw. unmöglich gemacht. Demgegenüber eröffnen bildgebende Radarsystem durch die aktive Sendung von elektromagnetischen Signalen die Möglichkeit kontinuierlich Daten über den Zustand der Oberfläche aufzuzeichnen, ohne von den atmosphärischen oder orbitalen Bedingungen abhängig zu sein. Das Ziel der vorliegenden Arbeit war es den Nutzen und Mehrwert von polarimetrischen Synthetic Aperture Radar (PolSAR) Daten der Satelliten TerraSAR-X, TanDEM-X, Radarsat-2 und ALOS PALSAR für die Charakterisierung und Klassifikation der arktischen Landoberfläche zu identifizieren. Darüber hinaus war es ein Ziel das vorläufige interferometrische digitale Höhenmodel der TanDEM-X Mission für die Charakterisierung der Landoberflächen-Morphologie zu verwenden. Die Arbeiten erfolgten hauptsächlich an ausgewählten Testgebieten im Bereich des kanadischen Mackenzie Deltas und im Norden von Banks Islanld. Für diese Regionen standen in situ erhobene Referenzdaten zur Landbedeckung zur Verfügung. Mit Blick auf den aktuellen Stand der Forschung wurden die Radardaten mit einem entwickelten Non-Local-Means Verfahren gefiltert. Die co-polarisierten Daten wurde zudem mit einer neu entwickelten zwei Komponenten Dekomposition verarbeitet. Das entwickelte Filterverfahren zeigt eine hohe Anwendbarkeit für alle Radardaten. Der Ansatz war in der Lage die Kanten und Grauwerte im Bild zu erhalten, bei einer gleichzeitigen Reduktion der Varianz und des Speckle-Effekts. Dies verbesserte nicht nur die Bildinterpretation, sondern auch die Bildklassifikation und eine Erhöhung der Klassifikationsgüte von ca. +10% konnte durch die Filterung erreicht werden. Die Merkmale der Dekomposition von co-polarisierten Daten zeigten eine hohe Korrelation zu den entsprechenden Merkmalen der Dekomposition von voll-polarisierten Daten. Die Korrelation war besonders hoch für Landbedeckungstypen, welche eine double oder single bounce Rückstreuung hervorrufen. Eine Anwendung von co-polarisierten Daten ist somit besonders sinnvoll und aussagekräftig für Landbedeckungstypen, welche nur einen geringen Teil an Volumenstreuung bedingen. Die vergleichende Auswertung der PolSAR Daten zeigte, dass sowohl X- als auch C-Band Daten besonders sensitiv für die untersuchten Landbedeckungsklassen waren. Die X-Band Daten zeigten die höchste Sensitivität für niedrige Tundrengesellschaften. Die C-Band Daten zeigten eine höhere Sensitivität für mittelhohe Tundrengesellschaften und Gebüsch (shrub). Die L-Band Daten wiesen im Vergleich dazu die geringste Sensitivität für die Oberflächenbedeckung auf. Ein Vergleich von verschiedenen dual-polarisierten Daten zeigte, dass die Kanalkombination HH/VV die beste Differenzierung der Landbedeckungsklassen lieferte. Weniger deutlich war die Differenzierung mit den Kombinationen HH/HV und VV/VH. Insgesamt am besten waren jedoch die voll-polarisierten Daten geeignet, auch wenn die Verbesserung im Vergleich zu den co-polarisierten Daten nur gering war. Die Analyse der Klassifikationsgenauigkeiten bestätigte dieses Bild, machte jedoch deutlich, dass zu einer genauen Landbedeckungsklassifikation die Einbeziehung von multispektraler Information notwendig ist. Eine Nutzung von voll-polarisierten C-Band und multispektralen Daten erbrachte so eine mittlere Güte von ca. 80% für unüberwachte und von ca. 90% für überwachte Klassifikationsverfahren. Ähnlich hohe Werte wurden für die Kombination von co-polarisierten X-Band und multispektralen Daten erreicht. Im Vergleich zu Klassifikation die nur auf Grundlage von multispektralen Daten durchgeführt wurden, erbrachte die Einbeziehung der polarisierten Radardaten eine zusätzliche durchschnittliche Klassifikationsgüte von ca. +15%. Der Zugewinn und die Möglichkeit zur Differenzierung war vor allem für die Bedeckungstypen der Feuchtgebiete (wetlands) und der niedrigen Tundrengesellschaften festzustellen. Die Analyse der digitalen Höhenmodelle zeigte ein hohes Potential der TanDEM-X Daten für die Charakterisierung der topographischen Gegebenheiten. Die aus den Daten abgeleiteten absoluten und relativen topographischen Merkmale waren für eine morphometrische Quantifizierung der Landoberflächen-Morphologie geeignet. Zudem konnten diese Merkmale auch für eine initiale Klassifikation der Landformen genutzt werden. Die Daten zeigten somit ein hohes Potential für die Unterstützung der geomorphologischen Kartierung und für die Identifizierung der aktuellen und zukünftigen Dynamik der Landoberfläche. KW - Mackenzie-River-Delta KW - Banks Islands KW - Radarfernerkundung KW - Topografie KW - Formmessung KW - Klassifikation KW - Relief KW - PolSAR KW - Synthetic Aperture Radar KW - Land Cover Classification KW - Digital Elevation Model KW - Arctic Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-115719 ER - TY - JOUR A1 - Pawellek, Ruben A1 - Krmar, Jovana A1 - Leistner, Adrian A1 - Djajić, Nevena A1 - Otašević, Biljana A1 - Protić, Ana A1 - Holzgrabe, Ulrike T1 - Charged aerosol detector response modeling for fatty acids based on experimental settings and molecular features: a machine learning approach JF - Journal of Cheminformatics N2 - The charged aerosol detector (CAD) is the latest representative of aerosol-based detectors that generate a response independent of the analytes' chemical structure. This study was aimed at accurately predicting the CAD response of homologous fatty acids under varying experimental conditions. Fatty acids from C12 to C18 were used as model substances due to semivolatile characterics that caused non-uniform CAD behaviour. Considering both experimental conditions and molecular descriptors, a mixed quantitative structure-property relationship (QSPR) modeling was performed using Gradient Boosted Trees (GBT). The ensemble of 10 decisions trees (learning rate set at 0.55, the maximal depth set at 5, and the sample rate set at 1.0) was able to explain approximately 99% (Q\(^2\): 0.987, RMSE: 0.051) of the observed variance in CAD responses. Validation using an external test compound confirmed the high predictive ability of the model established (R-2: 0.990, RMSEP: 0.050). With respect to the intrinsic attribute selection strategy, GBT used almost all independent variables during model building. Finally, it attributed the highest importance to the power function value, the flow rate of the mobile phase, evaporation temperature, the content of the organic solvent in the mobile phase and the molecular descriptors such as molecular weight (MW), Radial Distribution Function-080/weighted by mass (RDF080m) and average coefficient of the last eigenvector from distance/detour matrix (Ve2_D/Dt). The identification of the factors most relevant to the CAD responsiveness has contributed to a better understanding of the underlying mechanisms of signal generation. An increased CAD response that was obtained for acetone as organic modifier demonstrated its potential to replace the more expensive and environmentally harmful acetonitrile. KW - High-performance liquid chromatography (HPLC) KW - Charged aerosol detector (CAD) KW - Gradient boosted trees (GBT) KW - Quantitative structure-property relationship modeling (QSPR) KW - Fatty acids Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-261618 VL - 13 IS - 1 ER - TY - JOUR A1 - Hentschel, Simon A1 - Kobs, Konstantin A1 - Hotho, Andreas T1 - CLIP knows image aesthetics JF - Frontiers in Artificial Intelligence N2 - Most Image Aesthetic Assessment (IAA) methods use a pretrained ImageNet classification model as a base to fine-tune. We hypothesize that content classification is not an optimal pretraining task for IAA, since the task discourages the extraction of features that are useful for IAA, e.g., composition, lighting, or style. On the other hand, we argue that the Contrastive Language-Image Pretraining (CLIP) model is a better base for IAA models, since it has been trained using natural language supervision. Due to the rich nature of language, CLIP needs to learn a broad range of image features that correlate with sentences describing the image content, composition, environments, and even subjective feelings about the image. While it has been shown that CLIP extracts features useful for content classification tasks, its suitability for tasks that require the extraction of style-based features like IAA has not yet been shown. We test our hypothesis by conducting a three-step study, investigating the usefulness of features extracted by CLIP compared to features obtained from the last layer of a comparable ImageNet classification model. In each step, we get more computationally expensive. First, we engineer natural language prompts that let CLIP assess an image's aesthetic without adjusting any weights in the model. To overcome the challenge that CLIP's prompting only is applicable to classification tasks, we propose a simple but effective strategy to convert multiple prompts to a continuous scalar as required when predicting an image's mean aesthetic score. Second, we train a linear regression on the AVA dataset using image features obtained by CLIP's image encoder. The resulting model outperforms a linear regression trained on features from an ImageNet classification model. It also shows competitive performance with fully fine-tuned networks based on ImageNet, while only training a single layer. Finally, by fine-tuning CLIP's image encoder on the AVA dataset, we show that CLIP only needs a fraction of training epochs to converge, while also performing better than a fine-tuned ImageNet model. Overall, our experiments suggest that CLIP is better suited as a base model for IAA methods than ImageNet pretrained networks. KW - Image Aesthetic Assessment KW - CLIP KW - language-image pre-training KW - text supervision KW - prompt engineering KW - AVA Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-297150 SN - 2624-8212 VL - 5 ER - TY - RPRT A1 - Le, Duy Thanh A1 - Großmann, Marcel A1 - Krieger, Udo R. T1 - Cloudless Resource Monitoring in a Fog Computing System Enabled by an SDN/NFV Infrastructure T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Today’s advanced Internet-of-Things applications raise technical challenges on cloud, edge, and fog computing. The design of an efficient, virtualized, context-aware, self-configuring orchestration system of a fog computing system constitutes a major development effort within this very innovative area of research. In this paper we describe the architecture and relevant implementation aspects of a cloudless resource monitoring system interworking with an SDN/NFV infrastructure. It realizes the basic monitoring component of the fundamental MAPE-K principles employed in autonomic computing. Here we present the hierarchical layering and functionality within the underlying fog nodes to generate a working prototype of an intelligent, self-managed orchestrator for advanced IoT applications and services. The latter system has the capability to monitor automatically various performance aspects of the resource allocation among multiple hosts of a fog computing system interconnected by SDN. KW - Datennetz KW - fog computing KW - SDN/NVF KW - container virtualization KW - autonomic orchestration KW - docker Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280723 ER - TY - JOUR A1 - Schokraie, Elham A1 - Warnken, Uwe A1 - Hotz-Wagenblatt, Agnes A1 - Grohme, Markus A. A1 - Hengherr, Steffen A1 - Förster, Frank A1 - Schill, Ralph O. A1 - Frohme, Marcus A1 - Dandekar, Thomas A1 - Schnölzer, Martina T1 - Comparative proteome analysis of Milnesium tardigradum in early embryonic state versus adults in active and anhydrobiotic state JF - PLoS One N2 - Tardigrades have fascinated researchers for more than 300 years because of their extraordinary capability to undergo cryptobiosis and survive extreme environmental conditions. However, the survival mechanisms of tardigrades are still poorly understood mainly due to the absence of detailed knowledge about the proteome and genome of these organisms. Our study was intended to provide a basis for the functional characterization of expressed proteins in different states of tardigrades. High-throughput, high-accuracy proteomics in combination with a newly developed tardigrade specific protein database resulted in the identification of more than 3000 proteins in three different states: early embryonic state and adult animals in active and anhydrobiotic state. This comprehensive proteome resource includes protein families such as chaperones, antioxidants, ribosomal proteins, cytoskeletal proteins, transporters, protein channels, nutrient reservoirs, and developmental proteins. A comparative analysis of protein families in the different states was performed by calculating the exponentially modified protein abundance index which classifies proteins in major and minor components. This is the first step to analyzing the proteins involved in early embryonic development, and furthermore proteins which might play an important role in the transition into the anhydrobiotic state. KW - life-span regulation KW - genes KW - Yolk protein KW - water stress KW - expression KW - tolerance KW - richtersius coronifer KW - superoxide-dismutase KW - caenorhabditis elegans KW - arabidopsis thaliana KW - vitellogenin Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-134447 VL - 7 IS - 9 ER - TY - JOUR A1 - Hossfeld, Tobias A1 - Heegaard, Poul E. A1 - Kellerer, Wolfgang T1 - Comparing the scalability of communication networks and systems JF - IEEE Access N2 - Scalability is often mentioned in literature, but a stringent definition is missing. In particular, there is no general scalability assessment which clearly indicates whether a system scales or not or whether a system scales better than another. The key contribution of this article is the definition of a scalability index (SI) which quantifies if a system scales in comparison to another system, a hypothetical system, e.g., linear system, or the theoretically optimal system. The suggested SI generalizes different metrics from literature, which are specialized cases of our SI. The primary target of our scalability framework is, however, benchmarking of two systems, which does not require any reference system. The SI is demonstrated and evaluated for different use cases, that are (1) the performance of an IoT load balancer depending on the system load, (2) the availability of a communication system depending on the size and structure of the network, (3) scalability comparison of different location selection mechanisms in fog computing with respect to delays and energy consumption; (4) comparison of time-sensitive networking (TSN) mechanisms in terms of efficiency and utilization. Finally, we discuss how to use and how not to use the SI and give recommendations and guidelines in practice. To the best of our knowledge, this is the first work which provides a general SI for the comparison and benchmarking of systems, which is the primary target of our scalability analysis. KW - communication networks KW - performance KW - availability KW - scalability Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349403 VL - 11 ER - TY - THES A1 - Spoerhase, Joachim T1 - Competitive and Voting Location T1 - Kompetitive und präferenzbasierte Standortprobleme N2 - We consider competitive location problems where two competing providers place their facilities sequentially and users can decide between the competitors. We assume that both competitors act non-cooperatively and aim at maximizing their own benefits. We investigate the complexity and approximability of such problems on graphs, in particular on simple graph classes such as trees and paths. We also develop fast algorithms for single competitive location problems where each provider places a single facilty. Voting location, in contrast, aims at identifying locations that meet social criteria. The provider wants to satisfy the users (customers) of the facility to be opened. In general, there is no location that is favored by all users. Therefore, a satisfactory compromise has to be found. To this end, criteria arising from voting theory are considered. The solution of the location problem is understood as the winner of a virtual election among the users of the facilities, in which the potential locations play the role of the candidates and the users represent the voters. Competitive and voting location problems turn out to be closely related. N2 - Wir betrachten kompetitive Standortprobleme, bei denen zwei konkurrierende Anbieter ihre Versorger sequenziell platzieren und die Kunden sich zwischen den Konkurrenten entscheiden können. Wir nehmen an, dass beide Konkurrenten nicht-kooperativ agieren und auf die Maximierung ihres eigenen Vorteils abzielen. Wir untersuchen die Komplexität und Approximierbarkeit solcher Probleme auf Graphen, insbesondere auf einfachen Graphklassen wie Bäumen und Pfaden. Ferner entwickeln wir schnelle Algorithmen für kompetitive Einzelstandortprobleme, bei denen jeder Anbieter genau einen Versorger errichtet. Im Gegensatz dazu geht es bei Voting-Standortproblemen um die Bestimmung eines Standorts, der die Benutzer oder Kunden soweit wie möglich zufrieden stellt. Solche Fragestellungen sind beispielsweise bei der Planung öffentlicher Einrichtungen relevant. In den meisten Fällen gibt es keinen Standort, der von allen Benutzern favorisiert wird. Daher muss ein Kompromiss gefunden werden. Hierzu werden Kriterien betrachtet, die auch in Wahlsystemen eingesetzt werden: Ein geeigneter Standort wird als Sieger einer gedachten Wahl verstanden, bei der die möglichen Standorte die zur Wahl stehenden Kandidaten und die Kunden die Wähler darstellen. Kompetitive Standortprobleme und Voting-Standortprobleme erweisen sich als eng miteinander verwandt. KW - Standortproblem KW - NP-hartes Problem KW - Approximationsalgorithmus KW - Graph KW - Effizienter Algorithmus KW - competitive location KW - voting location KW - NP-hardness KW - approximation algorithm KW - efficient algorithm KW - graph KW - tree KW - graph decomposition Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-52978 ER -