TY - JOUR A1 - Loh, Frank A1 - Wamser, Florian A1 - Poignée, Fabian A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - YouTube Dataset on Mobile Streaming for Internet Traffic Modeling and Streaming Analysis JF - Scientific Data N2 - Around 4.9 billion Internet users worldwide watch billions of hours of online video every day. As a result, streaming is by far the predominant type of traffic in communication networks. According to Google statistics, three out of five video views come from mobile devices. Thus, in view of the continuous technological advances in end devices and increasing mobile use, datasets for mobile streaming are indispensable in research but only sparsely dealt with in literature so far. With this public dataset, we provide 1,081 hours of time-synchronous video measurements at network, transport, and application layer with the native YouTube streaming client on mobile devices. The dataset includes 80 network scenarios with 171 different individual bandwidth settings measured in 5,181 runs with limited bandwidth, 1,939 runs with emulated 3 G/4 G traces, and 4,022 runs with pre-defined bandwidth changes. This corresponds to 332 GB video payload. We present the most relevant quality indicators for scientific use, i.e., initial playback delay, streaming video quality, adaptive video quality changes, video rebuffering events, and streaming phases. KW - internet traffic KW - mobile streaming KW - YouTube Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300240 VL - 9 IS - 1 ER - TY - THES A1 - Feineis, Markus T1 - Wortgenaue Annotation digitalisierter mittelalterlicher Handschriften T1 - One-to-one Annotation of Digitised Medieval Manuscripts N2 - No abstract available KW - Annotation KW - Handschrift KW - Digitalisierung Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-30448 ER - TY - THES A1 - Heck, Klaus T1 - Wireless LAN performance studies in the context of 4G networks N2 - Wireless communication is nothing new. The first data transmissions based on electromagnetic waves have been successfully performed at the end of the 19th century. However, it took almost another century until the technology was ripe for mass market. The first mobile communication systems based on the transmission of digital data were introduced in the late 1980s. Within just a couple of years they have caused a revolution in the way people communicate. The number of cellular phones started to outnumber the fixed telephone lines in many countries and is still rising. New technologies in 3G systems, such as UMTS, allow higher data rates and support various kinds of multimedia services. Nevertheless, the end of the road in wireless communication is far from being reached. In the near future, the Internet and cellular phone systems are expected to be integrated to a new form of wireless system. Bandwidth requirements for a rich set of wireless services, e.g.\ video telephony, video streaming, online gaming, will be easily met. The transmission of voice data will just be another IP based service. On the other hand, building such a system is by far not an easy task. The problems in the development of the UMTS system showed the high complexity of wireless systems with support for bandwidth-hungry, IP-based services. But the technological challenges are just one difficulty. Telecommunication systems are planned on a world-wide basis, such that standard bodies, governments, institutions, hardware vendors, and service providers have to find agreements and compromises on a number of different topics. In this work, we provide the reader with a discussion of many of the topics involved in the planning of a Wireless LAN system that is capable of being integrated into the 4th generation mobile networks (4G) that is being discussed nowadays. Therefore, it has to be able to cope with interactive voice and video traffic while still offering high data rates for best effort traffic. Let us assume a scenario where a huge office complex is completely covered with Wireless LAN access points. Different antenna systems are applied in order to reduce the number of access points that are needed on the one hand, while optimizing the coverage on the other. No additional infrastructure is implemented. Our goal is to evaluate whether the Wireless LAN technology is capable of dealing with the various demands of such a scenario. First, each single access point has to be capable of supporting best-effort and Quality of Service (QoS) demanding applications simultaneously. The IT infrastructure in our scenario consists solely of Wireless LAN, such that it has to allow users surfing the Web, while others are involved in voice calls or video conferences. Then, there is the problem of overlapping cells. Users attached to one access point produce interference for others. However, the QoS support has to be maintained, which is not an easy task. Finally, there are nomadic users, which roam from one Wireless LAN cell to another even during a voice call. There are mechanisms in the standard that allow for mobility, but their capabilities for QoS support are yet to be studied. This shows the large number of unresolved issues when it comes to Wireless LAN in the context of 4G networks. In this work we want to tackle some of the problems. KW - Drahtloses lokales Netz KW - Wireless LAN KW - Voice-over-IP (VoIP) KW - Quality-of-Service (QoS) KW - IEEE 802.11e KW - 4G Networks KW - Wireless LAN KW - Voice-over-IP (VoIP) KW - Quality-of-Service (QoS) KW - IEEE 802.11e KW - 4G Networks Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14896 ER - TY - RPRT ED - Hoßfeld, Tobias ED - Wunderer, Stefan T1 - White Paper on Crowdsourced Network and QoE Measurements – Definitions, Use Cases and Challenges N2 - The goal of the white paper at hand is as follows. The definitions of the terms build a framework for discussions around the hype topic ‘crowdsourcing’. This serves as a basis for differentiation and a consistent view from different perspectives on crowdsourced network measurements, with the goal to provide a commonly accepted definition in the community. The focus is on the context of mobile and fixed network operators, but also on measurements of different layers (network, application, user layer). In addition, the white paper shows the value of crowdsourcing for selected use cases, e.g., to improve QoE or regulatory issues. Finally, the major challenges and issues for researchers and practitioners are highlighted. This white paper is the outcome of the Würzburg seminar on “Crowdsourced Network and QoE Measurements” which took place from 25-26 September 2019 in Würzburg, Germany. International experts were invited from industry and academia. They are well known in their communities, having different backgrounds in crowdsourcing, mobile networks, network measurements, network performance, Quality of Service (QoS), and Quality of Experience (QoE). The discussions in the seminar focused on how crowdsourcing will support vendors, operators, and regulators to determine the Quality of Experience in new 5G networks that enable various new applications and network architectures. As a result of the discussions, the need for a white paper manifested, with the goal of providing a scientific discussion of the terms “crowdsourced network measurements” and “crowdsourced QoE measurements”, describing relevant use cases for such crowdsourced data, and its underlying challenges. During the seminar, those main topics were identified, intensively discussed in break-out groups, and brought back into the plenum several times. The outcome of the seminar is this white paper at hand which is – to our knowledge – the first one covering the topic of crowdsourced network and QoE measurements. KW - Crowdsourcing KW - Network Measurements KW - Quality of Service (QoS) KW - Quality of Experience (QoE) KW - crowdsourced network measurements KW - crowdsourced QoE measurements Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202327 ER - TY - THES A1 - Karch, Oliver T1 - Where am I? - Indoor localization based on range measurements T1 - Wo bin ich? - Lokalisation mit Hilfe von Entfernungsmesswerten N2 - Nowadays, robotics plays an important role in increasing fields of application. There exist many environments or situations where mobile robots instead of human beings are used, since the tasks are too hazardous, uncomfortable, repetitive, or costly for humans to perform. The autonomy and the mobility of the robot are often essential for a good solution of these problems. Thus, such a robot should at least be able to answer the question "Where am I?". This thesis investigates the problem of self-localizing a robot in an indoor environment using range measurements. That is, a robot equipped with a range sensor wakes up inside a building and has to determine its position using only its sensor data and a map of its environment. We examine this problem from an idealizing point of view (reducing it into a pure geometric one) and further investigate a method of Guibas, Motwani, and Raghavan from the field of computational geometry to solving it. Here, so-called visibility skeletons, which can be seen as coarsened representations of visibility polygons, play a decisive role. In the major part of this thesis we analyze the structures and the occurring complexities in the framework of this scheme. It turns out that the main source of complication are so-called overlapping embeddings of skeletons into the map polygon, for which we derive some restrictive visibility constraints. Based on these results we are able to improve one of the occurring complexity bounds in the sense that we can formulate it with respect to the number of reflex vertices instead of the total number of map vertices. This also affects the worst-case bound on the preprocessing complexity of the method. The second part of this thesis compares the previous idealizing assumptions with the properties of real-world environments and discusses the occurring problems. In order to circumvent these problems, we use the concept of distance functions, which model the resemblance between the sensor data and the map, and appropriately adapt the above method to the needs of realistic scenarios. In particular, we introduce a distance function, namely the polar coordinate metric, which seems to be well suited to the localization problem. Finally, we present the RoLoPro software where most of the discussed algorithms are implemented (including the polar coordinate metric). N2 - Heutzutage spielen autonome Roboter bei einer wachsenden Zahl von Anwendungsgebieten eine entscheidende Rolle. Sie werden überall dort anstelle von menschlichen Arbeitskräften eingesetzt, wo die jeweiligen Aufgaben für Menschen zu gefährlich, unangenehm, monoton oder schlicht zu teuer sind. Dabei sind die Autonomie und Mobilität des Roboters sehr oft grundlegend für eine gute Problemlösung. Ein solcher Roboter sollte also zumindest die Frage "Wo bin ich?" zufriedenstellend beantworten können. Diese Arbeit behandelt das Problem der Selbstlokalisation in einer Gebäudeumgebung mit Hilfe von Entfernungsmesswerten. Das heißt, ein Roboter - ausgestattet mit einem Entfernungssensor - wacht innerhalb eines Gebäudes auf und muss mit Hilfe seiner Sensordaten und einer Karte seiner Einsatzumgebung seine Position bestimmen. Wir betrachten eine idealisierte Variante dieser Aufgabe, die ein rein geometrisches Problem zum Inhalt hat, und untersuchen ein Verfahren von Guibas, Motwani und Raghavan aus dem Gebiet der Algorithmischen Geometrie, welches dieses löst. Hierbei spielen sogenannte Sichtbarkeitsskelette (vergröberte Darstellungen von Sichtbarkeitspolygonen) eine entscheidende Rolle. Im Hauptteil der Arbeit analysieren wir die Strukturen und die auftretenden Komplexitäten im Rahmen dieses Verfahrens. Es stellt sich heraus, dass die Hauptschwierigkeiten sogenannte überlappende Einbettungen von Skeletten in das Kartenpolygon zur Ursache haben, für die wir einige einschränkende Sichtbarkeitsbedingungen zeigen. Gestützt auf diese Resultate können wir die auftretenden Komplexitätsschranken dahingehend verbessern, dass wir diese nicht nur in Abhängigkeit der Gesamtzahl aller Kartenecken angeben, sondern in Abhängigkeit der Zahl der konkaven Ecken. Dies hat ebenfalls Auswirkungen auf die Worst-Case-Schranken für die Preprocessing-Komplexität des Verfahrens. Der zweite Teil der Arbeit vergleicht die anfangs gemachten idealisierenden Annahmen mit den Gegebenheiten realer Umgebungen und adressiert die auftretenden Probleme. Um diese zu umgehen verwenden wir das Konzept sogenannter Distanzfunktionen, welche die Ähnlichkeit zwischen den Sensordaten und der Karte modellieren, und passen das Verfahren auf geeignete Weise an die Bedürfnisse realistischer Szenarien an. Insbesondere führen wir eine Distanzfunktion ein - die Polarkoordinatenmetrik - welche sich für das Lokalisationsproblem besonders gut zu eignen scheint. Schlussendlich stellen wir die Software RoLoPro vor, in der die meisten der diskutierten Algorithmen (einschließlich der Polarkoordinatenmetrik) implementiert sind. KW - Autonomer Roboter KW - Mobiler Roboter KW - Lokalisation KW - Lokalisation KW - Autonomer Roboter KW - Sichtbarkeit KW - Ähnlichkeitsmaß KW - Algorithmische Geometrie KW - Localization KW - Autonomous Robot KW - Visibility KW - Similarity Measure KW - Computational Geometry Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8442 ER - TY - JOUR A1 - Gageik, Nils A1 - Strohmeier, Michael A1 - Montenegro, Sergio T1 - Waypoint flight parameter comparison of an autonomous UAV JF - International Journal of Artificial Intelligence & Applications (IJAIA) N2 - The present paper compares the effect of different waypoint parameters on the flight performance of a special autonomous indoor UAV (unmanned aerial vehicle) fusing ultrasonic, inertial, pressure and optical sensors for 3D positioning and controlling. The investigated parameters are the acceptance threshold for reaching a waypoint as well as the maximal waypoint step size or block size. The effect of these parameters on the flight time and accuracy of the flight path is investigated. Therefore the paper addresses how the acceptance threshold and step size influence the speed and accuracy of the autonomous flight and thus influence the performance of the presented autonomous quadrocopter under real indoor navigation circumstances. Furthermore the paper demonstrates a drawback of the standard potential field method for navigation of such autonomous quadrocopters and points to an improvement. KW - autonomous UAV KW - Quadrocopter KW - Quadrotor KW - waypoint parameter KW - navigation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-96833 ER - TY - RPRT A1 - Großmann, Marcel A1 - Le, Duy Thanh T1 - Visualization of Network Emulation Enabled by Kathará T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In network research, reproducibility of experiments is not always easy to achieve. Infrastructures are cumbersome to set up or are not available due to vendor-specific devices. Emulators try to overcome those issues to a given extent and are available in different service models. Unfortunately, the usability of emulators requires time-consuming efforts and a deep understanding of their functionality. At first, we analyze to which extent currently available open-source emulators support network configurations and how user-friendly they are. With these insights, we describe, how an ease-to-use emulator is implemented and may run as a Network Emulator as a Service (NEaaS). Therefore, virtualization plays a major role in order to deploy a NEaaS based on Kathará. KW - Network Emulator KW - Visualized Kathará KW - Containerization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322189 ER - TY - RPRT A1 - Lhamo, Osel A1 - Nguyen, Giang T. A1 - Fitzek, Frank H. P. T1 - Virtual Queues for QoS Compliance of Haptic Data Streams in Teleoperation T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Tactile Internet aims at allowing perceived real-time interactions between humans and machines. This requires satisfying a stringent latency requirement of haptic data streams whose data rates vary drastically as the results of perceptual codecs. This introduces a complex problem for the underlying network infrastructure to fulfill the pre-defined level of Quality of Service (QoS). However, novel networking hardware with data plane programming capability allows processing packets differently and opens up a new opportunity. For example, a dynamic and network-aware resource management strategy can help satisfy the QoS requirements of different priority flows without wasting precious bandwidth. This paper introduces virtual queues for service differentiation between different types of traffic streams, leveraging protocol independent switch architecture (PISA). We propose coordinating the management of all the queues and dynamically adapting their sizes to minimize packet loss and delay due to network congestion and ensure QoS compliance. KW - Datennetz KW - data plane programming KW - software defined network KW - P4 KW - virtual queue KW - haptic data Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280762 ER - TY - RPRT A1 - Riegler, Clemens A1 - Kayal, Hakan T1 - VELEX: Venus Lightning Experiment N2 - Lightning has fascinated humanity since the beginning of our existence. Different types of lightning like sprites and blue jets were discovered, and many more are theorized. However, it is very likely that these phenomena are not exclusive to our home planet. Venus’s dense and active atmosphere is a place where lightning is to be expected. Missions like Venera, Pioneer, and Galileo have carried instruments to measure electromagnetic activity. These measurements have indeed delivered results. However, these results are not clear. They could be explained by other effects like cosmic rays, plasma noise, or spacecraft noise. Furthermore, these lightning seem different from those we know from our home planet. In order to tackle these issues, a different approach to measurement is proposed. When multiple devices in different spacecraft or locations can measure the same atmospheric discharge, most other explanations become increasingly less likely. Thus, the suggested instrument and method of VELEX incorporates multiple spacecraft. With this approach, the question about the existence of lightning on Venus could be settled. T3 - Raumfahrttechnik und Extraterrestrik - 3 KW - Venus KW - Lightning KW - CubeSat KW - Balloon KW - Autorotation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-282481 ER - TY - JOUR A1 - Wamser, Florian A1 - Seufert, Anika A1 - Hall, Andrew A1 - Wunderer, Stefan A1 - Hoßfeld, Tobias T1 - Valid statements by the crowd: statistical measures for precision in crowdsourced mobile measurements JF - Network N2 - Crowdsourced network measurements (CNMs) are becoming increasingly popular as they assess the performance of a mobile network from the end user's perspective on a large scale. Here, network measurements are performed directly on the end-users' devices, thus taking advantage of the real-world conditions end-users encounter. However, this type of uncontrolled measurement raises questions about its validity and reliability. The problem lies in the nature of this type of data collection. In CNMs, mobile network subscribers are involved to a large extent in the measurement process, and collect data themselves for the operator. The collection of data on user devices in arbitrary locations and at uncontrolled times requires means to ensure validity and reliability. To address this issue, our paper defines concepts and guidelines for analyzing the precision of CNMs; specifically, the number of measurements required to make valid statements. In addition to the formal definition of the aspect, we illustrate the problem and use an extensive sample data set to show possible assessment approaches. This data set consists of more than 20.4 million crowdsourced mobile measurements from across France, measured by a commercial data provider. KW - mobile networks KW - crowdsourced measurements KW - statistical validity Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-284154 SN - 2673-8732 VL - 1 IS - 2 SP - 215 EP - 232 ER - TY - RPRT A1 - Mazigh, Sadok Mehdi A1 - Beausencourt, Marcel A1 - Bode, Max Julius A1 - Scheffler, Thomas T1 - Using P4-INT on Tofino for Measuring Device Performance Characteristics in a Network Lab T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper presents a prototypical implementation of the In-band Network Telemetry (INT) specification in P4 and demonstrates a use case, where a Tofino Switch is used to measure device and network performance in a lab setting. This work is based on research activities in the area of P4 data plane programming conducted at the network lab of HTW Berlin. KW - P4-INT Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322084 ER - TY - JOUR A1 - Liman, Leon A1 - May, Bernd A1 - Fette, Georg A1 - Krebs, Jonathan A1 - Puppe, Frank T1 - Using a clinical data warehouse to calculate and present key metrics for the radiology department: implementation and performance evaluation JF - JMIR Medical Informatics N2 - Background: Due to the importance of radiologic examinations, such as X-rays or computed tomography scans, for many clinical diagnoses, the optimal use of the radiology department is 1 of the primary goals of many hospitals. Objective: This study aims to calculate the key metrics of this use by creating a radiology data warehouse solution, where data from radiology information systems (RISs) can be imported and then queried using a query language as well as a graphical user interface (GUI). Methods: Using a simple configuration file, the developed system allowed for the processing of radiology data exported from any kind of RIS into a Microsoft Excel, comma-separated value (CSV), or JavaScript Object Notation (JSON) file. These data were then imported into a clinical data warehouse. Additional values based on the radiology data were calculated during this import process by implementing 1 of several provided interfaces. Afterward, the query language and GUI of the data warehouse were used to configure and calculate reports on these data. For the most common types of requested reports, a web interface was created to view their numbers as graphics. Results: The tool was successfully tested with the data of 4 different German hospitals from 2018 to 2021, with a total of 1,436,111 examinations. The user feedback was good, since all their queries could be answered if the available data were sufficient. The initial processing of the radiology data for using them with the clinical data warehouse took (depending on the amount of data provided by each hospital) between 7 minutes and 1 hour 11 minutes. Calculating 3 reports of different complexities on the data of each hospital was possible in 1-3 seconds for reports with up to 200 individual calculations and in up to 1.5 minutes for reports with up to 8200 individual calculations. Conclusions: A system was developed with the main advantage of being generic concerning the export of different RISs as well as concerning the configuration of queries for various reports. The queries could be configured easily using the GUI of the data warehouse, and their results could be exported into the standard formats Excel and CSV for further processing. KW - data warehouse KW - eHealth KW - hospital data KW - electronic health records KW - radiology KW - statistics and numerical data KW - medical records Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349411 SN - 2291-9694 VL - 11 ER - TY - JOUR A1 - Loh, Frank A1 - Poignée, Fabian A1 - Wamser, Florian A1 - Leidinger, Ferdinand A1 - Hoßfeld, Tobias T1 - Uplink vs. Downlink: Machine Learning-Based Quality Prediction for HTTP Adaptive Video Streaming JF - Sensors N2 - Streaming video is responsible for the bulk of Internet traffic these days. For this reason, Internet providers and network operators try to make predictions and assessments about the streaming quality for an end user. Current monitoring solutions are based on a variety of different machine learning approaches. The challenge for providers and operators nowadays is that existing approaches require large amounts of data. In this work, the most relevant quality of experience metrics, i.e., the initial playback delay, the video streaming quality, video quality changes, and video rebuffering events, are examined using a voluminous data set of more than 13,000 YouTube video streaming runs that were collected with the native YouTube mobile app. Three Machine Learning models are developed and compared to estimate playback behavior based on uplink request information. The main focus has been on developing a lightweight approach using as few features and as little data as possible, while maintaining state-of-the-art performance. KW - HTTP adaptive video streaming KW - quality of experience prediction KW - machine learning Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241121 SN - 1424-8220 VL - 21 IS - 12 ER - TY - THES A1 - Bleier, Michael T1 - Underwater Laser Scanning - Refractive Calibration, Self-calibration and Mapping for 3D Reconstruction T1 - Laserscanning unter Wasser - Refraktive Kalibrierung, Selbstkalibrierung und Kartierung zur 3D Rekonstruktion N2 - There is great interest in affordable, precise and reliable metrology underwater: Archaeologists want to document artifacts in situ with high detail. In marine research, biologists require the tools to monitor coral growth and geologists need recordings to model sediment transport. Furthermore, for offshore construction projects, maintenance and inspection millimeter-accurate measurements of defects and offshore structures are essential. While the process of digitizing individual objects and complete sites on land is well understood and standard methods, such as Structure from Motion or terrestrial laser scanning, are regularly applied, precise underwater surveying with high resolution is still a complex and difficult task. Applying optical scanning techniques in water is challenging due to reduced visibility caused by turbidity and light absorption. However, optical underwater scanners provide significant advantages in terms of achievable resolution and accuracy compared to acoustic systems. This thesis proposes an underwater laser scanning system and the algorithms for creating dense and accurate 3D scans in water. It is based on laser triangulation and the main optical components are an underwater camera and a cross-line laser projector. The prototype is configured with a motorized yaw axis for capturing scans from a tripod. Alternatively, it is mounted to a moving platform for mobile mapping. The main focus lies on the refractive calibration of the underwater camera and laser projector, the image processing and 3D reconstruction. For highest accuracy, the refraction at the individual media interfaces must be taken into account. This is addressed by an optimization-based calibration framework using a physical-geometric camera model derived from an analytical formulation of a ray-tracing projection model. In addition to scanning underwater structures, this work presents the 3D acquisition of semi-submerged structures and the correction of refraction effects. As in-situ calibration in water is complex and time-consuming, the challenge of transferring an in-air scanner calibration to water without re-calibration is investigated, as well as self-calibration techniques for structured light. The system was successfully deployed in various configurations for both static scanning and mobile mapping. An evaluation of the calibration and 3D reconstruction using reference objects and a comparison of free-form surfaces in clear water demonstrate the high accuracy potential in the range of one millimeter to less than one centimeter, depending on the measurement distance. Mobile underwater mapping and motion compensation based on visual-inertial odometry is demonstrated using a new optical underwater scanner based on fringe projection. Continuous registration of individual scans allows the acquisition of 3D models from an underwater vehicle. RGB images captured in parallel are used to create 3D point clouds of underwater scenes in full color. 3D maps are useful to the operator during the remote control of underwater vehicles and provide the building blocks to enable offshore inspection and surveying tasks. The advancing automation of the measurement technology will allow non-experts to use it, significantly reduce acquisition time and increase accuracy, making underwater metrology more cost-effective. N2 - Das Interesse an präziser, zuverlässiger und zugleich kostengünstiger Unterwassermesstechnik ist groß. Beispielsweise wollen Archäologen Artefakte in situ mit hoher Detailtreue dokumentieren und in der Meeresforschung benötigen Biologen Messwerkzeuge zur Beobachtung des Korallenwachstums. Auch Geologen sind auf Messdaten angewiesen, um Sedimenttransporte zu modellieren. Darüber hinaus ist für die Errichtung von Offshore-Bauwerken, sowie deren Wartung und Inspektion eine millimetergenaue Vermessung von vorhandenen Strukturen und Defekten unerlässlich. Während die Digitalisierung einzelner Objekte und ganzer Areale an Land gut erforscht ist und verschiedene Standardmethoden, wie zum Beispiel Structure from Motion oder terrestrisches Laserscanning, regelmäßig eingesetzt werden, ist die präzise und hochauflösende Unterwasservermessung nach wie vor eine komplexe und schwierige Aufgabe. Die Anwendung optischer Messtechnik im Wasser ist aufgrund der eingeschränkten Sichttiefe durch Trübung und Lichtabsorption eine Herausforderung. Optische Unterwasserscanner bieten jedoch Vorteile hinsichtlich der erreichbaren Auflösung und Genauigkeit gegenüber akustischen Systemen. In dieser Arbeit werden ein Unterwasser-Laserscanning-System und die Algorithmen zur Erzeugung von 3D-Scans mit hoher Punktdichte im Wasser vorgestellt. Es basiert auf Lasertriangulation und die optischen Hauptkomponenten sind eine Unterwasserkamera und ein Kreuzlinienlaserprojektor. Das System ist mit einer motorisierten Drehachse ausgestattet, um Scans von einem Stativ aus aufzunehmen. Alternativ kann es von einer beweglichen Plattform aus für mobile Kartierung eingesetzt werden. Das Hauptaugenmerk liegt auf der refraktiven Kalibrierung der Unterwasserkamera und des Laserprojektors, der Bildverarbeitung und der 3D-Rekonstruktion. Um höchste Genauigkeit zu erreichen, muss die Brechung an den einzelnen Medienübergängen berücksichtigt werden. Dies wird durch ein physikalisch-geometrisches Kameramodell, das auf einer analytischen Beschreibung der Strahlenverfolgung basiert, und ein optimierungsbasiertes Kalibrierverfahren erreicht. Neben dem Scannen von Unterwasserstrukturen wird in dieser Arbeit auch die 3D-Erfassung von teilweise im Wasser befindlichen Strukturen und die Korrektur der dabei auftretenden Brechungseffekte vorgestellt. Da die Kalibrierung im Wasser komplex und zeitintensiv ist, wird die Übertragung einer Kalibrierung des Scanners in Luft auf die Bedingungen im Wasser ohne Neukalibrierung, sowie die Selbstkalibrierung für Lichtschnittverfahren untersucht. Das System wurde in verschiedenen Konfigurationen sowohl für statisches Scannen als auch für die mobile Kartierung erfolgreich eingesetzt. Die Validierung der Kalibrierung und der 3D-Rekonstruktion anhand von Referenzobjekten und der Vergleich von Freiformflächen in klarem Wasser zeigen das hohe Genauigkeitspotenzial im Bereich von einem Millimeter bis weniger als einem Zentimeter in Abhängigkeit von der Messdistanz. Die mobile Unterwasserkartierung und Bewegungskompensation anhand visuell-inertialer Odometrie wird mit einem neuen optischen Unterwasserscanner auf Basis der Streifenprojektion demonstriert. Dabei ermöglicht die kontinuierliche Registrierung von Einzelscans die Erfassung von 3D-Modellen von einem Unterwasserfahrzeug aus. Mit Hilfe von parallel aufgenommenen RGB-Bildern werden dabei farbige 3D-Punktwolken der Unterwasserszenen erstellt. Diese 3D-Karten dienen beispielsweise dem Bediener bei der Fernsteuerung von Unterwasserfahrzeugen und bilden die Grundlage für Offshore-Inspektions- und Vermessungsaufgaben. Die fortschreitende Automatisierung der Messtechnik wird somit auch eine Verwendung durch Nichtfachleute ermöglichen und gleichzeitig die Erfassungszeit erheblich verkürzen und die Genauigkeit verbessern, was die Vermessung im Wasser kostengünstiger und effizienter macht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 28 KW - Selbstkalibrierung KW - Punktwolke KW - Bildverarbeitung KW - 3D Reconstruction KW - Self-calibration KW - Underwater Scanning KW - Underwater Mapping KW - Dreidimensionale Rekonstruktion KW - 3D-Rekonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322693 SN - 978-3-945459-45-4 ER - TY - RPRT A1 - Grigorjew, Alexej A1 - Schumann, Lukas Kilian A1 - Diederich, Philip A1 - Hoßfeld, Tobias A1 - Kellerer, Wolfgang T1 - Understanding the Performance of Different Packet Reception and Timestamping Methods in Linux T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This document briefly presents some renowned packet reception techniques for network packets in Linux systems. Further, it compares their performance when measuring packet timestamps with respect to throughput and accuracy. Both software and hardware timestamps are compared, and various parameters are examined, including frame size, link speed, network interface card, and CPU load. The results indicate that hardware timestamping offers significantly better accuracy with no downsides, and that packet reception techniques that avoid system calls offer superior measurement throughput. KW - packet reception method KW - timestamping method KW - Linux Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322064 ER - TY - THES A1 - Freiberg, Martina T1 - UI-, User-, & Usability-Oriented Engineering of Participative Knowledge-Based Systems T1 - UI-, Benutzer-, & Usability-orientierte Entwicklung partizipativer Wissensbasierter Systeme N2 - Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the ’perfect intelligent software’ continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions. In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE: (1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for ’yet another’ self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model. For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE. Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS. N2 - Das Interesse an wissensbasierten Systemen (WBS) in verschiedensten Fachdisziplinen und Anwendungskontexten wächst nach wie vor stetig. Das frühere Ziel — intelligente Software als Expertenersatz — verschiebt sich dabei allerdings kontinuierlich in Richtung partizipativer, nutzerzentrierter Anwendungen. Solche Systeme erlauben dem Benutzer, das vorhandene persönliche Hintergrundwissen in den Problemlösungsprozess mit einzubringen um die Effizienz des Systems zu steigern und die User Experience zu verbessern. Konkret definieren wir für partizipative WBS die folgenden, nichtfunktionalen Anforderungen: Transparenz (umfassende Vermittlung des Systemstatus), Konfigurierbarkeit (Anpassbarkeit an verschiedene Benutzer und Grad der Benutzerkontrolle und Explorationsmöglichkeit), Qualität sowohl der Wissensbasis als auch der Benutzeroberfläche und Fortentwickelbarkeit (Fähigkeit des WBS analog zu den Kenntnissen seiner Nutzer zu reifen). Viele dieser Anforderungen hängen stark von den jeweiligen Nutzern ab. Im Umkehrschluss erfordert dies eine nutzerzentriertere Entwicklung solcher Systeme. Die häufig sehr fachspezifischen Zieldomänen haben meist entsprechend komplexe Wissensbasen zur Folge. Dies verlangt erst Recht nach einem wohlüberlegten, durchdachten UI- und Inkteraktionsdesign. Dem zum Trotz fokussieren aktuelle WBS Entwicklungsansätze jedoch nach wie vor auf der Wissensformalisierung. Mit der Folge, dass oft keine optimalen, schlecht wiederverwendbare und nur teilweise (oder gar nicht) evaluierte WBS UI/Interaktionslösungen entstehen. Die vorliegende Dissertation schlägt einen allumfassenderen WBS Entwicklungsansatz vor. Unter Berücksichtigung der starken, wechselseitigen Beeinflussung von Wissensbasis und UI ist dieser geprägt durch eine starke Verzahnung von Wissensbasis- und UI-Entwicklung. Der Ansatz stützt sich auf drei Kernkomponenten für allumfassende Entwicklung wissensbasierter Systeme: (1) Extensible Prototyping, eine adaptierte Form des evolutionären Prototyping. Extensible Prototyping basiert auf hochentwickelten UI Prototypen und definiert zwei Erweiterungsschritte um jederzeit WBS-Kernprototypen (Wissensbasis und Kern-UI) beziehungsweise voll funktionale wissensbasierte Anwendungen (WBS Kernprototyp und Rahmenfunktionalität) zu erstellen. (2) WBS UI Patterns. Diese Patterns, oder Muster, definieren wiederverwendbare Lösungen für die Kern-UI und -Inkteraktion. In dieser Arbeit stellen wir eine Sammlung grundlegender WBS UI Patterns vor. (3) Passende Usability Techniken die sich speziell für die Evaluation von WBS Software eignen. Insgesamt streben wir keine weitere, in sich geschlossene WBS Entwicklungsmethodologie an. Vielmehr motivieren wir, existierende, Wissensformalisierungs-lastige Ansätze um die vorgeschlagenen Kernkomponenten zu erweitern. Wir demonstrieren das am agilen Prozessmodell für wissensbasierte Systeme. Für die praktische Umsetzung des vorgestellten Ansatzes stellen wir außerdem das spezialisierte WBS Prototyping- und Softwareentwicklungswerkzeug ProKEt vor. ProKEt unterstützt eine Auswahl der interessantesten WBS UI Patterns sowie zugehöriger Konfigurationsoptionen. Deren weitere Anpassung beziehungsweise Erweiterung ist auf verschiedenen Expertise-Leveln möglich. Um ebenso die Anwendung von Usability Techniken zu unterstützen, bietet ProKEt weiterhin Funktionalität für die quantitative und qualitative Datensammlung. Auch baut ProKEt bewusst auf die strikt verzahnte Entwicklung von UI- und Wissensbasis. Für die einfache und nahtlose Integration von Wissensformalisierung in den Gesamtprozess unterstützt ProKEt zwei externe Wissensformalisierungs-Werkzeuge: KnowOF, eine Wissensformalisierungsumgebung welche standartisierte Office Dokumente nutzt. Und KnowWE, ein semantisches Wiki für die kollaborative Wissensformalisierung im Web. Damit ist ProKEt ein mächtiges Werkzeug für umfassende, nutzerzentrierte WBS Entwicklung. Mithilfe des Entwicklungsansatzes und des Werkzeugs ProKEt haben wir weiterhin einen neuartigen WBS Typ entwickelt: Wissensbasierte Klärungssysteme, im Wesentlichen ein Mashup aus Beratungs-, Erklärungs- und Rechtfertigungskomponente. Diese Systeme stellen eine angepasste Realisierung von partizipativen WBS für höchst fachliche Kontexte dar und verlangten entsprechend nach einem sehr speziellen Design. In der vorliegenden Arbeit stellen wir daher neben allgemeinen WBS UI Patterns auch einige spezialisierte Varianten für wissensbasierte Klärungssysteme vor. KW - Wissensbasiertes System KW - Knowledge-based Systems Engineering KW - Expert System KW - Usability KW - UI and Interaction Design KW - User Participation KW - Expertensystem Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-106072 SN - 978-3-95826-012-2 (print) SN - 978-3-95826-013-9 (online) PB - Würzburg University Press ER - TY - THES A1 - Saska, Martin T1 - Trajectory planning and optimal control for formations of autonomous robots T1 - Die Bahnplanung und die optimale Steuerung für Formationen der autonomen Roboter N2 - In this thesis, we present novel approaches for formation driving of nonholonomic robots and optimal trajectory planning to reach a target region. The methods consider a static known map of the environment as well as unknown and dynamic obstacles detected by sensors of the formation. The algorithms are based on leader following techniques, where the formation of car-like robots is maintained in a shape determined by curvilinear coordinates. Beyond this, the general methods of formation driving are specialized and extended for an application of airport snow shoveling. Detailed descriptions of the algorithms complemented by relevant stability and convergence studies will be provided in the following chapters. Furthermore, discussions of the applicability will be verified by various simulations in existing robotic environments and also by a hardware experiment. N2 - In dieser Arbeit präsentieren wir neuartige Algorithmen für die Steuerung der Formationen der nichtholonomen Roboter und ihre optimale Bahnplanung. Die Algorithmen beruhen auf "leader-follower" Techniken. Die Formationen der "car-like" Roboter sind in einer bestimmten Form von "curvilinear" Koordinaten gehalten. Die Steuerungmethoden der Formationen sind spezialisiert und erweitert um ihre Anwendung auf das Flughafenschneeschaufeln. In dieser Arbeit werden die detaillierten Beschreibungen der Algorithmen durch entsprechende Stabilität- und Konvergenz-Studien gestellt. Ihre Anwendbarkeit wird durch verschiedene Simulationen und eine Hardware-Experiment überprüft. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 3 KW - Autonomer Roboter KW - Mobiler Roboter KW - Optimale Kontrolle KW - Formation KW - Steuerung KW - formation driving KW - mobile robots KW - snow shoveling KW - receding horizon control KW - model predictive control KW - trajectory planning Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53175 SN - 978-3-923959-56-3 ER - TY - RPRT A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Towards Understanding the Signaling Traffic in 5G Core Networks T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The Fifth Generation (5G) communication technology, its infrastructure and architecture, though already deployed in campus and small scale networks, is still undergoing continuous changes and research. Especially, in the light of future large scale deployments and industrial use cases, a detailed analysis of the performance and utilization with regard to latency and service times constraints is crucial. To this end, a fine granular investigation of the Network Function (NF) based core system and the duration for all the tasks performed by these services is necessary. This work presents the first steps towards analyzing the signaling traffic in 5G core networks, and introduces a tool to automatically extract sequence diagrams and service times for NF tasks from traffic traces. KW - signaling traffic KW - 5G core network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322106 ER - TY - RPRT A1 - Vomhoff, Viktoria A1 - Geissler, Stefan A1 - Gebert, Steffen A1 - Hossfeld, Tobias T1 - Towards Understanding the Global IPX Network from an MVNO Perspective T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In this paper, we work to understand the global IPX network from the perspective of an MVNO. In order to do this, we provide a brief description of the global architecture of mobile carriers. We provide initial results with respect to mapping the vast and complex interconnection network enabling global roaming from the point of view of a single MVNO. Finally, we provide preliminary results regarding the quality of service observed under global roaming conditions. KW - global IPX network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322121 ER - TY - RPRT A1 - Höweler, Malte A1 - Xiang, Zuo A1 - Höpfner, Franz A1 - Nguyen, Giang T. A1 - Fitzek, Frank H. P. T1 - Towards Stateless Core Networks: Measuring State Access Patterns T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Future mobile communication networks, such as 5G and beyond, can benefit from Virtualized Network Functions (VNFs) when deployed on cloud infrastructures to achieve elasticity and scalability. However, new challenges arise as to managing states of Network Functions (NFs). Especially control plane VNFs, which are mainly found in cellular core networks like the 5G Core (5GC), received little attention since the shift towards virtualizing NFs. Most existing solutions for these core networks are often complex, intrusive, and are seldom compliant with the standard. With the emergence of 5G campus networks, UEs will be mainly machine-type devices. These devices communicate more deterministically, bringing new opportunities for elaborated state management. This work presents an emulation environment to perform rigorous measurements on state access patterns. The emulation comes with a fully parameterized Markov model for the UE to examine a wide variety of different devices. These measurements can then be used as a solid base for designing an efficient, simple, and standard conform state management solution that brings us further towards stateless core networks. KW - Datennetz KW - 5GC KW - VNF KW - SBA KW - measurements KW - MTC Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280770 ER - TY - JOUR A1 - Kaiser, Dennis A1 - Lesch, Veronika A1 - Rothe, Julian A1 - Strohmeier, Michael A1 - Spieß, Florian A1 - Krupitzer, Christian A1 - Montenegro, Sergio A1 - Kounev, Samuel T1 - Towards Self-Aware Multirotor Formations JF - Computers N2 - In the present day, unmanned aerial vehicles become seemingly more popular every year, but, without regulation of the increasing number of these vehicles, the air space could become chaotic and uncontrollable. In this work, a framework is proposed to combine self-aware computing with multirotor formations to address this problem. The self-awareness is envisioned to improve the dynamic behavior of multirotors. The formation scheme that is implemented is called platooning, which arranges vehicles in a string behind the lead vehicle and is proposed to bring order into chaotic air space. Since multirotors define a general category of unmanned aerial vehicles, the focus of this thesis are quadcopters, platforms with four rotors. A modification for the LRA-M self-awareness loop is proposed and named Platooning Awareness. The implemented framework is able to offer two flight modes that enable waypoint following and the self-awareness module to find a path through scenarios, where obstacles are present on the way, onto a goal position. The evaluation of this work shows that the proposed framework is able to use self-awareness to learn about its environment, avoid obstacles, and can successfully move a platoon of drones through multiple scenarios. KW - self-aware computing KW - unmanned aerial vehicles KW - multirotors KW - quadcopters KW - intelligent transportation systems Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200572 SN - 2073-431X VL - 9 IS - 1 ER - TY - JOUR A1 - Loh, Frank A1 - Mehling, Noah A1 - Hoßfeld, Tobias T1 - Towards LoRaWAN without data loss: studying the performance of different channel access approaches JF - Sensors N2 - The Long Range Wide Area Network (LoRaWAN) is one of the fastest growing Internet of Things (IoT) access protocols. It operates in the license free 868 MHz band and gives everyone the possibility to create their own small sensor networks. The drawback of this technology is often unscheduled or random channel access, which leads to message collisions and potential data loss. For that reason, recent literature studies alternative approaches for LoRaWAN channel access. In this work, state-of-the-art random channel access is compared with alternative approaches from the literature by means of collision probability. Furthermore, a time scheduled channel access methodology is presented to completely avoid collisions in LoRaWAN. For this approach, an exhaustive simulation study was conducted and the performance was evaluated with random access cross-traffic. In a general theoretical analysis the limits of the time scheduled approach are discussed to comply with duty cycle regulations in LoRaWAN. KW - LoRaWAN KW - IoT KW - channel management KW - scheduling KW - collision Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-302418 SN - 1424-8220 VL - 22 IS - 2 ER - TY - RPRT A1 - Martino, Luigi A1 - Deutschmann, Jörg A1 - Hielscher, Kai-Steffen A1 - German, Reinhard T1 - Towards a 5G Satellite Communication Framework for V2X T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In recent years, satellite communication has been expanding its field of application in the world of computer networks. This paper aims to provide an overview of how a typical scenario involving 5G Non-Terrestrial Networks (NTNs) for vehicle to everything (V2X) applications is characterized. In particular, a first implementation of a system that integrates them together will be described. Such a framework will later be used to evaluate the performance of applications such as Vehicle Monitoring (VM), Remote Driving (RD), Voice Over IP (VoIP), and others. Different configuration scenarios such as Low Earth Orbit and Geostationary Orbit will be considered. KW - 5G KW - non-terrestrial networks KW - satellite communication Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322148 ER - TY - THES A1 - Tischler, German T1 - Theory and Applications of Parametric Weighted Finite Automata T1 - Theorie und Anwendungen parametrisch gewichteter endlicher Automaten N2 - Parametric weighted finite automata (PWFA) are a multi-dimensional generalization of weighted finite automata. The expressiveness of PWFA contains the expressiveness of weighted finite automata as well as the expressiveness of affine iterated function system. The thesis discusses theory and applications of PWFA. The properties of PWFA definable sets are studied and it is shown that some fractal generator systems can be simulated using PWFA and that various real and complex functions can be represented by PWFA. Furthermore, the decoding of PWFA and the interpretation of PWFA definable sets is discussed. N2 - Parametrisch gewichtete endliche Automaten (PWFA) sind eine multidimensionale Verallgemeinerung gewichteter endlicher Automaten, die sowohl die funktionale Mächtigkeit gewichteter endlicher Automaten als auch die affiner iterierter Funktionensystem umschließt. Die Arbeit diskutiert die Theorie und Anwendungen von PWFA. Es werden Eigenschaften der von PWFA definierbaren Mengen untersucht, gezeigt dass verschiedene fraktale Generatorsysteme mit PWFA simuliert werden können und dass viele praxisrelevante reelle und komplexe Funktionen und Relationen mit PWFA darstellbar sind. Ferner wird die Dekodierung von PWFA und die Interpretation PWFA-darstellbarer Mengen diskutiert. KW - Automat KW - Automata Theory Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28145 ER - TY - JOUR A1 - Unruh, Fabian A1 - Landeck, Maximilian A1 - Oberdörfer, Sebastian A1 - Lugrin, Jean-Luc A1 - Latoschik, Marc Erich T1 - The Influence of Avatar Embodiment on Time Perception - Towards VR for Time-Based Therapy JF - Frontiers in Virtual Reality N2 - Psycho-pathological conditions, such as depression or schizophrenia, are often accompanied by a distorted perception of time. People suffering from this conditions often report that the passage of time slows down considerably and that they are “stuck in time.” Virtual Reality (VR) could potentially help to diagnose and maybe treat such mental conditions. However, the conditions in which a VR simulation could correctly diagnose a time perception deviation are still unknown. In this paper, we present an experiment investigating the difference in time experience with and without a virtual body in VR, also known as avatar. The process of substituting a person’s body with a virtual body is called avatar embodiment. Numerous studies demonstrated interesting perceptual, emotional, behavioral, and psychological effects caused by avatar embodiment. However, the relations between time perception and avatar embodiment are still unclear. Whether or not the presence or absence of an avatar is already influencing time perception is still open to question. Therefore, we conducted a between-subjects design with and without avatar embodiment as well as a real condition (avatar vs. no-avatar vs. real). A group of 105 healthy subjects had to wait for seven and a half minutes in a room without any distractors (e.g., no window, magazine, people, decoration) or time indicators (e.g., clocks, sunlight). The virtual environment replicates the real physical environment. Participants were unaware that they will be asked to estimate their waiting time duration as well as describing their experience of the passage of time at a later stage. Our main finding shows that the presence of an avatar is leading to a significantly faster perceived passage of time. It seems to be promising to integrate avatar embodiment in future VR time-based therapy applications as they potentially could modulate a user’s perception of the passage of time. We also found no significant difference in time perception between the real and the VR conditions (avatar, no-avatar), but further research is needed to better understand this outcome. KW - virtual reality KW - time perception KW - avatar embodiment KW - immersion KW - human computer interaction (HCI) Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259076 VL - 2 ER - TY - JOUR A1 - Obremski, David A1 - Friedrich, Paula A1 - Haak, Nora A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - The impact of mixed-cultural speech on the stereotypical perception of a virtual robot JF - Frontiers in Robotics and AI N2 - Despite the fact that mixed-cultural backgrounds become of increasing importance in our daily life, the representation of multiple cultural backgrounds in one entity is still rare in socially interactive agents (SIAs). This paper’s contribution is twofold. First, it provides a survey of research on mixed-cultured SIAs. Second, it presents a study investigating how mixed-cultural speech (in this case, non-native accent) influences how a virtual robot is perceived in terms of personality, warmth, competence and credibility. Participants with English or German respectively as their first language watched a video of a virtual robot speaking in either standard English or German-accented English. It was expected that the German-accented speech would be rated more positively by native German participants as well as elicit the German stereotypes credibility and conscientiousness for both German and English participants. Contrary to the expectations, German participants rated the virtual robot lower in terms of competence and credibility when it spoke with a German accent, whereas English participants perceived the virtual robot with a German accent as more credible compared to the version without an accent. Both the native English and native German listeners classified the virtual robot with a German accent as significantly more neurotic than the virtual robot speaking standard English. This work shows that by solely implementing a non-native accent in a virtual robot, stereotypes are partly transferred. It also shows that the implementation of a non-native accent leads to differences in the perception of the virtual robot. KW - non-native accent KW - social robotics KW - intelligent virtual agents KW - stereotypes KW - mixed-cultural KW - culturally aware KW - socially interactive agents Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-293531 SN - 2296-9144 VL - 9 ER - TY - THES A1 - Schmitz, Heinz T1 - The Forbidden Pattern Approach to Concatenation Hierarchies T1 - Verbotsmuster und Hierarchien regulärer sternfreier Sprachen N2 - The thesis looks at the question asking for the computability of the dot-depth of star-free regular languages. Here one has to determine for a given star-free regular language the minimal number of alternations between concatenation on one hand, and intersection, union, complement on the other hand. This question was first raised in 1971 (Brzozowski/Cohen) and besides the extended star-heights problem usually refered to as one of the most difficult open questions on regular languages. The dot-depth problem can be captured formally by hierarchies of classes of star-free regular languages B(0), B(1/2), B(1), B(3/2),... and L(0), L(1/2), L(1), L(3/2),.... which are defined via alternating the closure under concatenation and Boolean operations, beginning with single alphabet letters. Now the question of dot-depth is the question whether these hierarchy classes have decidable membership problems. The thesis makes progress on this question using the so-called forbidden pattern approach: Classes of regular languages are characterized in terms of patterns in finite automata (subgraphs in the transition graph) that are not allowed. Such a characterization immediately implies the decidability of the respective class, since the absence of a certain pattern in a given automaton can be effectively verified. Before this work, the decidability of B(0), B(1/2), B(1) and L(0), L(1/2), L(1), L(3/2) were known. Here a detailed study of these classes with help of forbidden patterns is given which leads to new insights into their inner structure. Furthermore, the decidability of B(3/2) is proven. Based on these results a theory of pattern iteration is developed which leads to the introduction of two new hierarchies of star-free regular languages. These hierarchies are decidable on one hand, on the other hand they are in close connection to the classes B(n) and L(n). It remains an open question here whether they may in fact coincide. Some evidence is given in favour of this conjecture which opens a new way to attack the dot-depth problem. Moreover, it is shown that the class L(5/2) is decidable in the restricted case of a two-letter alphabet. N2 - Die Arbeit beschaeftigt sich mit der Frage nach der Berechenbarkeit der Punkttiefe sternfreier regulaerer Sprachen. Dabei handelt es sich um die Aufgabe, zu einer gegebenen sternfreien regulaeren Sprache die minimal moegliche Anzahl von Wechseln zwischen den Operationen Konkatenation einerseits und Durchschnitt, Vereinigung, Komplement andererseits in einem sternfreien regulaeren Ausdruck fuer die gegebene Sprache zu bestimmen. Diese Frage wurde 1971 erstmals aufgeworfen (Brzozowski/Cohen) und gilt neben dem Problem der erweiterten Sternhoehe als eine der schwierigsten offenen Fragen der Theorie der regulaeren Sprachen. Formal fassen laesst sich das Problem der Punkttiefe durch Hierarchien von Klassen sternfreier regulaerer Sprachen B(0), B(1/2), B(1), B(3/2),...sowie L(0), L(1/2), L(1), L(3/2),.... die - ausgehend von einzelnen Buchstaben - mittels Alternierung zwischen Konkatenation und Booleschen Operationen definiert sind. Die Frage nach der Punkttiefe wird hier zur Frage nach der Entscheidbarkeit der Hierarchieklassen. In der Arbeit werden neue Fortschritte mittels sogenannter Verbotsmuster erzielt. Bei diesem Ansatz werden Klassen regulaerer Sprachen dadurch charakterisiert, dass in den zugehoerigen endlichen Automaten bestimmte Muster (Teilgraphen des Ueberfuehrungsgraphen) verboten werden. Gelingt eine solche Charakterisierung, folgt unmittelbar die Entscheidbarkeit der Klasse, da das Nichtvorhandensein eines Musters in einem gegebenen endlichen Automaten effektiv geprueft werden kann. Bisher war die Entscheidbarkeit von B(0), B(1/2), B(1) und L(0), L(1/2), L(1), L(3/2) bekannt. Mit Hilfe von Verbotsmustern erfolgt eine genaue Untersuchung dieser Klassen, die zu neuen Erkenntnissen ueber ihre innere Struktur fuehrt. Darueberhinaus gelingt der Nachweis der Entscheidbarkeit von B(3/2). Basierend auf diesen Ergebnissen wird eine Theorie der Verbotsmusteriteration entwickelt, die zur Einfuehrung von zwei neuen Hierarchien sternfreier regulaerer Sprachen fuehrt. Diese neuen Hierarchien sind zum einen entscheidbar, zum anderen stehen sie in enger Beziehung zu den Klassen B(n) und L(n). Es bleibt an dieser Stelle eine offene Frage, ob sie eventuell sogar mit ihnen uebereinstimmen. Fuer diese Vermutung werden einige Indizien gesammelt und somit ein neuer Weg fuer eine moegliche Loesung des Problems der Punkttiefe aufgezeigt. In diesem Zusammenhang erfolgt auch erstmals der Nachweis der Entscheidbarkeit der Klasse L(5/2) im eingeschraenkten Fall eines zweielementigen Alphabets. KW - Sternfreie Sprache KW - Dot-Depth-Hierarchie KW - Straubing-Th´erien-Hierarchie KW - Verbotenes Muster KW - Theoretische Informatik KW - reguläre Sprachen KW - endliche Automaten KW - Dot-Depth Problem KW - Entscheidbarkeit KW - Verbotsmuster KW - Theoretical Computer Science KW - regular languages KW - finite automata KW - dot-depth problem KW - decidability KW - forbidden patterns Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-2832 ER - TY - RPRT A1 - Kounev, Samuel A1 - Brosig, Fabian A1 - Huber, Nikolaus T1 - The Descartes Modeling Language N2 - This technical report introduces the Descartes Modeling Language (DML), a new architecture-level modeling language for modeling Quality-of-Service (QoS) and resource management related aspects of modern dynamic IT systems, infrastructures and services. DML is designed to serve as a basis for self-aware resource management during operation ensuring that system QoS requirements are continuously satisfied while infrastructure resources are utilized as efficiently as possible. KW - Ressourcenmanagement KW - Software Engineering KW - Resource and Performance Management KW - Software Performance Engineering KW - Software Performance Modeling KW - Performance Management KW - Quality-of-Service Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-104887 ER - TY - THES A1 - Driewer, Frauke T1 - Teleoperation Interfaces in Human-Robot Teams T1 - Benutzerschnittstellen für Teleoperation in Mensch-Roboter Teams N2 - Diese Arbeit beschäftigt sich mit der Verbesserung von Mensch-Roboter Interaktion in Mensch-Roboter Teams für Teleoperation Szenarien, wie z.B. robotergestützte Feuerwehreinsätze. Hierbei wird ein Konzept und eine Architektur für ein System zur Unterstützung von Teleoperation von Mensch-Roboter Teams vorgestellt. Die Anforderungen an Informationsaustausch und -verarbeitung, insbesondere für die Anwendung Rettungseinsatz, werden ausgearbeitet. Weiterhin wird das Design der Benutzerschnittstellen für Mensch-Roboter Teams dargestellt und Prinzipien für Teleoperation-Systeme und Benutzerschnittstellen erarbeitet. Alle Studien und Ansätze werden in einem Prototypen-System implementiert und in verschiedenen Benutzertests abgesichert. Erweiterungsmöglichkeiten zum Einbinden von 3D Sensordaten und die Darstellung auf Stereovisualisierungssystemen werden gezeigt. N2 - This work deals with teams in teleoperation scenarios, where one human team partner (supervisor) guides and controls multiple remote entities (either robotic or human) and coordinates their tasks. Such a team needs an appropriate infrastructure for sharing information and commands. The robots need to have a level of autonomy, which matches the assigned task. The humans in the team have to be provided with autonomous support, e.g. for information integration. Design and capabilities of the human-robot interfaces will strongly influence the performance of the team as well as the subjective feeling of the human team partners. Here, it is important to elaborate the information demand as well as how information is presented. Such human-robot systems need to allow the supervisor to gain an understanding of what is going on in the remote environment (situation awareness) by providing the necessary information. This includes achieving fast assessment of the robot´s or remote human´s state. Processing, integration and organization of data as well as suitable autonomous functions support decision making and task allocation and help to decrease the workload in this multi-entity teleoperation task. Interaction between humans and robots is improved by a common world model and a responsive system and robots. The remote human profits from a simplified user interface providing exactly the information needed for the actual task at hand. The topic of this thesis is the investigation of such teleoperation interfaces in human-robot teams, especially for high-risk, time-critical, and dangerous tasks. The aim is to provide a suitable human-robot team structure as well as analyze the demands on the user interfaces. On one side, it will be looked on the theoretical background (model, interactions, and information demand). On the other side, real implementations for system, robots, and user interfaces are presented and evaluated as testbeds for the claimed requirements. Rescue operations, more precisely fire-fighting, was chosen as an exemplary application scenario for this work. The challenges in such scenarios are high (highly dynamic environments, high risk, time criticality etc.) and it can be expected that results can be transferred to other applications, which have less strict requirements. The present work contributes to the introduction of human-robot teams in task-oriented scenarios, such as working in high risk domains, e.g. fire-fighting. It covers the theoretical background of the required system, the analysis of related human factors concepts, as well as discussions on implementation. An emphasis is placed on user interfaces, their design, requirements and user testing, as well as on the used techniques (three-dimensional sensor data representation, mixed reality, and user interface design guidelines). Further, the potential integration of 3D sensor data as well as the visualization on stereo visualization systems is introduced. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 1 KW - Robotik KW - Mobiler Roboter KW - Autonomer Roboter KW - Mensch-Maschine-System KW - Mensch-Maschine-Schnittstelle KW - Mixed Reality KW - Mensch-Roboter-Interaktion KW - Situationsbewusstsein KW - Teleoperation KW - Benutzerschnittstelle KW - Rettungsroboter KW - Human-Robot-Interaction KW - Situation Awareness KW - Teleoperation KW - User Interface KW - Search-and-Rescue Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36351 SN - 978-3-923959-57-0 N1 - Zugl. gedruckte Ausgabe: ISBN: 978-3-923959-54-9 (Paper) ER - TY - JOUR A1 - Lesch, Veronika A1 - König, Maximilian A1 - Kounev, Samuel A1 - Stein, Anthony A1 - Krupitzer, Christian T1 - Tackling the rich vehicle routing problem with nature-inspired algorithms JF - Applied Intelligence N2 - In the last decades, the classical Vehicle Routing Problem (VRP), i.e., assigning a set of orders to vehicles and planning their routes has been intensively researched. As only the assignment of order to vehicles and their routes is already an NP-complete problem, the application of these algorithms in practice often fails to take into account the constraints and restrictions that apply in real-world applications, the so called rich VRP (rVRP) and are limited to single aspects. In this work, we incorporate the main relevant real-world constraints and requirements. We propose a two-stage strategy and a Timeline algorithm for time windows and pause times, and apply a Genetic Algorithm (GA) and Ant Colony Optimization (ACO) individually to the problem to find optimal solutions. Our evaluation of eight different problem instances against four state-of-the-art algorithms shows that our approach handles all given constraints in a reasonable time. KW - logistics KW - rich vehicle routing problem KW - ant-colony optimization KW - genetic algorithm KW - real-world application Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268942 SN - 1573-7497 VL - 52 ER - TY - THES A1 - Travers, Stephen T1 - Structural Properties of NP-Hard Sets and Uniform Characterisations of Complexity Classes T1 - Strukturelle Eigenschaften NP-harter Mengen und uniforme Charakterisierungen von Komplexitätsklassen N2 - This thesis is devoted to the study of computational complexity theory, a branch of theoretical computer science. Computational complexity theory investigates the inherent difficulty in designing efficient algorithms for computational problems. By doing so, it analyses the scalability of computational problems and algorithms and places practical limits on what computers can actually accomplish. Computational problems are categorised into complexity classes. Among the most important complexity classes are the class NP and the subclass of NP-complete problems, which comprises many important optimisation problems in the field of operations research. Moreover, with the P-NP-problem, the class NP represents the most important unsolved question in computer science. The first part of this thesis is devoted to the study of NP-complete-, and more generally, NP-hard problems. It aims at improving our understanding of this important complexity class by systematically studying how altering NP-hard sets affects their NP-hardness. This research is related to longstanding open questions concerning the complexity of unions of disjoint NP-complete sets, and the existence of sparse NP-hard sets. The second part of the thesis is also dedicated to complexity classes but takes a different perspective: In a sense, after investigating the interior of complexity classes in the first part, the focus shifts to the description of complexity classes and thereby to the exterior in the second part. It deals with the description of complexity classes through leaf languages, a uniform framework which allows us to characterise a great variety of important complexity classes. The known concepts are complemented by a new leaf-language model. To a certain extent, this new approach combines the advantages of the known models. The presented results give evidence that the connection between the theory of formal languages and computational complexity theory might be closer than formerly known. N2 - Diese Dissertation behandelt die Komplexitätstheorie, ein zentrales Teilgebiet der Theoretischen Informatik. Die Komplexitätstheorie untersucht die inhärente Schwierigkeit, effiziente Algorithmen für Berechnungsprobleme zu entwerfen. Sie analysiert die Skalierbarkeit von Berechnungsproblemen und Algorithmen und stellt grundsätzliche Grenzen für die Leistungsfähigkeit von Computern auf. Berechnungsprobleme werden in Komplexitätsklassen kategorisiert. Dabei spielen die Klasse NP und die in ihr enthaltene Klasse der NP-vollständigen Probleme eine wichtige Rolle. Letztere umfasst zahlreiche in der Praxis bedeutsame Probleme aus dem Bereich Operations Research. Darüber hinaus repräsentiert die Klasse NP mit dem P-NP Problem gleichfalls das wichtigste ungelöste Problem in der Informatik. Der erste Teil dieser Dissertation ist der Untersuchung NP-vollständiger und noch allgemeiner, NP-harter Mengen gewidmet. Durch eine systematische Untersuchung der Frage, wie sich partielle Modifikationen von Mengen auf deren NP-Härte auswirken, soll das Verständnis dieser wichtigen Komplexitätsklasse verbessert werden. Die Untersuchungen in diesem Bereich stehen in enger Verbindung zu wichtigen ungelösten Fragen, wie beispielsweise der Frage nach der Komplexität von Vereinigungen disjunkter NP-vollständiger Mengen und darüber hinaus der Frage nach der Existenz dünner, NP-harter Mengen. Der zweite Teil der Dissertation beschäftigt sich ebenfalls mit der Komplexitätstheorie, nimmt dabei aber eine andere Perspektive ein: Während im ersten Teil mit der Untersuchung struktureller Eigenschaften innere Aspekte von Komplexitätsklassen im Vordergrund stehen dreht es sich im zweiten Teil um die Beschreibung von Komplexitätsklassen. Dabei werden so genannte Blattsprachen verwendet, welche einen uniformen Beschreibungsmechanismus für Komplexitätsklassen darstellen. Die bestehenden Blattsprachen-Konzepte werden durch einen neuen Ansatz ergänzt, der in einem gewissen Sinne die Vorteile der bekannten Ansätze vereint. Die erzielten Ergebnisse sind Evidenz dafür, dass die Verbindung zwischen der Theorie der formalen Sprachen und der Komplexitätstheorie noch enger ist als bislang vermutet. KW - Berechnungskomplexität KW - Komplexität KW - Theoretische Informatik KW - NP-Vollständigkeit KW - Strukturelle Komplexität KW - NP-complete sets KW - structural complexity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-27124 ER - TY - RPRT A1 - Savvidis, Dimitrios A1 - Roth, Robert A1 - Tutsch, Dietmar T1 - Static Evaluation of a Wheel-Topology for an SDN-based Network Usecase T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - The increased occurrence of Software-Defined-Networking (SDN) not only improves the dynamics and maintenance of network architectures, but also opens up new use cases and application possibilities. Based on these observations, we propose a new network topology consisting of a star and a ring topology. This hybrid topology will be called wheel topology in this paper. We have considered the static characteristics of the wheel topology and compare them with known other topologies. KW - Datennetz KW - SDN KW - topology KW - wheel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280715 ER - TY - JOUR A1 - Wick, Christoph A1 - Hartelt, Alexander A1 - Puppe, Frank T1 - Staff, symbol and melody detection of Medieval manuscripts written in square notation using deep Fully Convolutional Networks JF - Applied Sciences N2 - Even today, the automatic digitisation of scanned documents in general, but especially the automatic optical music recognition (OMR) of historical manuscripts, still remains an enormous challenge, since both handwritten musical symbols and text have to be identified. This paper focuses on the Medieval so-called square notation developed in the 11th–12th century, which is already composed of staff lines, staves, clefs, accidentals, and neumes that are roughly spoken connected single notes. The aim is to develop an algorithm that captures both the neumes, and in particular its melody, which can be used to reconstruct the original writing. Our pipeline is similar to the standard OMR approach and comprises a novel staff line and symbol detection algorithm based on deep Fully Convolutional Networks (FCN), which perform pixel-based predictions for either staff lines or symbols and their respective types. Then, the staff line detection combines the extracted lines to staves and yields an F\(_1\) -score of over 99% for both detecting lines and complete staves. For the music symbol detection, we choose a novel approach that skips the step to identify neumes and instead directly predicts note components (NCs) and their respective affiliation to a neume. Furthermore, the algorithm detects clefs and accidentals. Our algorithm predicts the symbol sequence of a staff with a diplomatic symbol accuracy rate (dSAR) of about 87%, which includes symbol type and location. If only the NCs without their respective connection to a neume, all clefs and accidentals are of interest, the algorithm reaches an harmonic symbol accuracy rate (hSAR) of approximately 90%. In general, the algorithm recognises a symbol in the manuscript with an F\(_1\) -score of over 96%. KW - optical music recognition KW - historical document analysis KW - medieval manuscripts KW - neume notation KW - fully convolutional neural networks Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197248 SN - 2076-3417 VL - 9 IS - 13 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Komma, Philipp A1 - Vogt, Stephanie A1 - Latoschik, Marc E. T1 - Spatial Presence in Mixed Realities – Considerations About the Concept, Measures, Design, and Experiments JF - Frontiers in Virtual Reality N2 - Plenty of theories, models, measures, and investigations target the understanding of virtual presence, i.e., the sense of presence in immersive Virtual Reality (VR). Other varieties of the so-called eXtended Realities (XR), e.g., Augmented and Mixed Reality (AR and MR) incorporate immersive features to a lesser degree and continuously combine spatial cues from the real physical space and the simulated virtual space. This blurred separation questions the applicability of the accumulated knowledge about the similarities of virtual presence and presence occurring in other varieties of XR, and corresponding outcomes. The present work bridges this gap by analyzing the construct of presence in mixed realities (MR). To achieve this, the following presents (1) a short review of definitions, dimensions, and measurements of presence in VR, and (2) the state of the art views on MR. Additionally, we (3) derived a working definition of MR, extending the Milgram continuum. This definition is based on entities reaching from real to virtual manifestations at one time point. Entities possess different degrees of referential power, determining the selection of the frame of reference. Furthermore, we (4) identified three research desiderata, including research questions about the frame of reference, the corresponding dimension of transportation, and the dimension of realism in MR. Mainly the relationship between the main aspects of virtual presence of immersive VR, i.e., the place-illusion, and the plausibility-illusion, and of the referential power of MR entities are discussed regarding the concept, measures, and design of presence in MR. Finally, (5) we suggested an experimental setup to reveal the research heuristic behind experiments investigating presence in MR. The present work contributes to the theories and the meaning of and approaches to simulate and measure presence in MR. We hypothesize that research about essential underlying factors determining user experience (UX) in MR simulations and experiences is still in its infancy and hopes this article provides an encouraging starting point to tackle related questions. KW - mixed reality KW - virtual-reality-continuum KW - spatial presence KW - place-illusion KW - plausibility-illusion KW - transportation KW - realism Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260328 VL - 2 ER - TY - THES A1 - Hopfner, Marbod T1 - Source Code Analysis, Management, and Visualization for PROLOG T1 - Quelltextanalyse, Verwaltung und Visualisierung für Prolog N2 - This thesis deals with the management and analysis of source code, which is represented in XML. Using the elementary methods of the XML repository, the XML source code representation is accessed, changed, updated, and saved. We reason about the source code, refactor source code and we visualize dependency graphs for call analysis. The visualized dependencies between files, modules, or packages are used to structure the source code in order to get a system, which is easily to comprehend, to modify and to complete. Sophisticated methods have been developed to slice the source code in order to obtain a working package of a large system, containing only a specific functionality. The basic methods, on which the visualizations and analyses are built on can be changed like changing a plug-in. The visualization methods can be reused in order to handle arbitrary source code representations, e.g., JAML, PHPML, PROLOGML. Dependencies of other context can be visualized, too, e.g., ER diagrams, or website references. The tool SCAV supports source code visualization and analyzing methods. N2 - Diese Dissertation beschäftigt sich mit der Verwaltung und Analyse von Quellcode, der in XML repräsentiert ist. Es werden Abhängigkeitsgraphen visualisiert um ein Projekt leichter verstehen zu können. Es kann auch ein Slice einer bestimmten Methode aus dem Projekt erstellt werden. Die Programmierung ist in Modulen gemacht, so dass die Funktionalität leicht erweitert werden kann. KW - Refactoring KW - Software Engineering KW - Refactoring KW - Call Graph KW - Dependency Graph KW - Abhängigskeitsgraph KW - Software Engineering KW - Source Code Visualization KW - Refactoring KW - Call Graph KW - Dependency Graph KW - Abhängigskeitsgraph KW - Software Engineering KW - Source Code Visualization Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36300 ER - TY - JOUR A1 - Davidson, Padraig A1 - Düking, Peter A1 - Zinner, Christoph A1 - Sperlich, Billy A1 - Hotho, Andreas T1 - Smartwatch-Derived Data and Machine Learning Algorithms Estimate Classes of Ratings of Perceived Exertion in Runners: A Pilot Study JF - Sensors N2 - The rating of perceived exertion (RPE) is a subjective load marker and may assist in individualizing training prescription, particularly by adjusting running intensity. Unfortunately, RPE has shortcomings (e.g., underreporting) and cannot be monitored continuously and automatically throughout a training sessions. In this pilot study, we aimed to predict two classes of RPE (≤15 “Somewhat hard to hard” on Borg’s 6–20 scale vs. RPE >15 in runners by analyzing data recorded by a commercially-available smartwatch with machine learning algorithms. Twelve trained and untrained runners performed long-continuous runs at a constant self-selected pace to volitional exhaustion. Untrained runners reported their RPE each kilometer, whereas trained runners reported every five kilometers. The kinetics of heart rate, step cadence, and running velocity were recorded continuously ( 1 Hz ) with a commercially-available smartwatch (Polar V800). We trained different machine learning algorithms to estimate the two classes of RPE based on the time series sensor data derived from the smartwatch. Predictions were analyzed in different settings: accuracy overall and per runner type; i.e., accuracy for trained and untrained runners independently. We achieved top accuracies of 84.8 % for the whole dataset, 81.8 % for the trained runners, and 86.1 % for the untrained runners. We predict two classes of RPE with high accuracy using machine learning and smartwatch data. This approach might aid in individualizing training prescriptions. KW - artificial intelligence KW - endurance KW - exercise intensity KW - precision training KW - prediction KW - wearable Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-205686 SN - 1424-8220 VL - 20 IS - 9 ER - TY - THES A1 - Sun, Kaipeng T1 - Six Degrees of Freedom Object Pose Estimation with Fusion Data from a Time-of-flight Camera and a Color Camera T1 - 6DOF Posenschätzung durch Datenfusion einer Time-of-Flight-Kamera und einer Farbkamera N2 - Object six Degrees of Freedom (6DOF) pose estimation is a fundamental problem in many practical robotic applications, where the target or an obstacle with a simple or complex shape can move fast in cluttered environments. In this thesis, a 6DOF pose estimation algorithm is developed based on the fused data from a time-of-flight camera and a color camera. The algorithm is divided into two stages, an annealed particle filter based coarse pose estimation stage and a gradient decent based accurate pose optimization stage. In the first stage, each particle is evaluated with sparse representation. In this stage, the large inter-frame motion of the target can be well handled. In the second stage, the range data based conventional Iterative Closest Point is extended by incorporating the target appearance information and used for calculating the accurate pose by refining the coarse estimate from the first stage. For dealing with significant illumination variations during the tracking, spherical harmonic illumination modeling is investigated and integrated into both stages. The robustness and accuracy of the proposed algorithm are demonstrated through experiments on various objects in both indoor and outdoor environments. Moreover, real-time performance can be achieved with graphics processing unit acceleration. N2 - Die 6DOF Posenschätzung von Objekten ist ein fundamentales Problem in vielen praktischen Robotikanwendungen, bei denen sich ein Ziel- oder Hindernisobjekt, einfacher oder komplexer Form, schnell in einer unstrukturierten schwierigen Umgebung bewegt. In dieser Forschungsarbeit wird zur Lösung des Problem ein 6DOF Posenschätzer entwickelt, der auf der Fusion von Daten einer Time-of-Flight-Kamera und einer Farbkamera beruht. Der Algorithmus ist in zwei Phasen unterteilt, ein Annealed Partikel-Filter bestimmt eine grobe Posenschätzung, welche mittels eines Gradientenverfahrens in einer zweiten Phase optimiert wird. In der ersten Phase wird jeder Partikel mittels sparse represenation ausgewertet, auf diese Weise kann eine große Inter-Frame-Bewegung des Zielobjektes gut behandelt werden. In der zweiten Phase wird die genaue Pose des Zielobjektes mittels des konventionellen, auf Entfernungsdaten beruhenden, Iterative Closest Point-Algorithmus aus der groben Schätzung der ersten Stufe berechnet. Der Algorithmus wurde dabei erweitert, so dass auch Informationen über das äußere Erscheinungsbild des Zielobjektes verwendet werden. Zur Kompensation von signifikanten Beleuchtungsschwankungen während des Trackings, wurde eine Modellierung der Ausleuchtung mittels Kugelflächenfunktionen erforscht und in beide Stufen der Posenschätzung integriert. Die Leistungsfähigkeit, Robustheit und Genauigkeit des entwickelten Algorithmus wurde in Experimenten im Innen- und Außenbereich mit verschiedenen Zielobjekten gezeigt. Zudem konnte gezeigt werden, dass die Schätzung mit Hilfe von Grafikprozessoren in Echtzeit möglich ist. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 10 KW - Mustererkennung KW - Maschinelles Sehen KW - Sensor KW - 3D Vision KW - 6DOF Pose Estimation KW - Visual Tracking KW - Pattern Recognition KW - Computer Vision KW - 3D Sensor Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-105089 SN - 978-3-923959-97-6 ER - TY - JOUR A1 - Baier, Pablo A. A1 - Baier-Saip, Jürgen A. A1 - Schilling, Klaus A1 - Oliveira, Jauvane C. T1 - Simulator for Minimally Invasive Vascular Interventions: Hardware and Software JF - Presence N2 - In the present work, a simulation system is proposed that can be used as an educational tool by physicians in training basic skills of minimally invasive vascular interventions. In order to accomplish this objective, initially the physical model of the wire proposed by Konings has been improved. As a result, a simpler and more stable method was obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. Then a recipe is given to merge the physical and the geometrical methods, resulting in efficient relaxations. Moreover, tests have shown that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions, and furthermore, the hardware to assemble the simulator has a low cost. KW - simulation system KW - educational tool KW - invasive vascular interventions Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-140580 SN - 1531-3263 VL - 25 IS - 2 ER - TY - THES A1 - Baier, Pablo A. T1 - Simulator for Minimally Invasive Vascular Interventions: Hardware and Software T1 - VR-Simulation für das Training von Herzkathetereingriffen: Hard- und Softwarelösung N2 - A complete simulation system is proposed that can be used as an educational tool by physicians in training basic skills of Minimally Invasive Vascular Interventions. In the first part, a surface model is developed to assemble arteries having a planar segmentation. It is based on Sweep Surfaces and can be extended to T- and Y-like bifurcations. A continuous force vector field is described, representing the interaction between the catheter and the surface. The computation time of the force field is almost unaffected when the resolution of the artery is increased. The mechanical properties of arteries play an essential role in the study of the circulatory system dynamics, which has been becoming increasingly important in the treatment of cardiovascular diseases. In Virtual Reality Simulators, it is crucial to have a tissue model that responds in real time. In this work, the arteries are discretized by a two dimensional mesh and the nodes are connected by three kinds of linear springs. Three tissue layers (Intima, Media, Adventitia) are considered and, starting from the stretch-energy density, some of the elasticity tensor components are calculated. The physical model linearizes and homogenizes the material response, but it still contemplates the geometric nonlinearity. In general, if the arterial stretch varies by 1% or less, then the agreement between the linear and nonlinear models is trustworthy. In the last part, the physical model of the wire proposed by Konings is improved. As a result, a simpler and more stable method is obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. The physical and the geometrical methods are merged, resulting in efficient relaxations. Tests show that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions and the hardware to assemble the simulator has a low cost. N2 - Es wird ein vollständiges Simulationssystem entwickelt, das von Ärzten als Lehrmittel zur Ausbildung grundlegender Fertigkeiten bei Herzkathetereingriffen eingesetzt werden kann. Im ersten Teil wird ein Oberflächenmodell zur Erstellung von Arterien mit planarer Segmentierung entwickelt. Im zweiten Teil werden die Arterien durch ein zweidimensionales Netz diskretisiert, die Knoten werden durch drei Arten linearer Federn verbunden und ausgehend von einer Dehnungsenergie-Dichte-Funktion werden einige Komponenten des Elastizitätstensors berechnet. Im letzten Teil wird das von anderen Autoren vorgeschlagene physikalische Modell des Drahtes verbessert und eine neue geometrische Methode entwickelt. Der vorgeschlagene Algorithmus ermöglicht Echtzeit-Ausführungen. Die Hardware des Simulators hat geringe Herstellungskosten. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 15 KW - Computersimulation KW - Simulator KW - Arterie KW - Elastizitätstensor KW - Herzkatheter KW - Minimally invasive vascular intervention KW - Wire relaxation KW - Artery KW - Elasticity tensor KW - Stiffness KW - educational tool KW - Elastizitätstensor KW - Herzkathetereingriff KW - Software KW - Hardware Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161190 SN - 978-3-945459-22-5 ER - TY - JOUR A1 - Seufert, Anika A1 - Poignée, Fabian A1 - Seufert, Michael A1 - Hoßfeld, Tobias T1 - Share and multiply: modeling communication and generated traffic in private WhatsApp groups JF - IEEE Access N2 - Group-based communication is a highly popular communication paradigm, which is especially prominent in mobile instant messaging (MIM) applications, such as WhatsApp. Chat groups in MIM applications facilitate the sharing of various types of messages (e.g., text, voice, image, video) among a large number of participants. As each message has to be transmitted to every other member of the group, which multiplies the traffic, this has a massive impact on the underlying communication networks. However, most chat groups are private and network operators cannot obtain deep insights into MIM communication via network measurements due to end-to-end encryption. Thus, the generation of traffic is not well understood, given that it depends on sizes of communication groups, speed of communication, and exchanged message types. In this work, we provide a huge data set of 5,956 private WhatsApp chat histories, which contains over 76 million messages from more than 117,000 users. We describe and model the properties of chat groups and users, and the communication within these chat groups, which gives unprecedented insights into private MIM communication. In addition, we conduct exemplary measurements for the most popular message types, which empower the provided models to estimate the traffic over time in a chat group. KW - communication models KW - group-based communication KW - mobile instant messaging KW - mobile messaging application KW - private chat groups KW - WhatsApp Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349430 VL - 11 ER - TY - JOUR A1 - Zimmerer, Chris A1 - Fischbach, Martin A1 - Latoschik, Marc Erich T1 - Semantic Fusion for Natural Multimodal Interfaces using Concurrent Augmented Transition Networks JF - Multimodal Technologies and Interaction N2 - Semantic fusion is a central requirement of many multimodal interfaces. Procedural methods like finite-state transducers and augmented transition networks have proven to be beneficial to implement semantic fusion. They are compliant with rapid development cycles that are common for the development of user interfaces, in contrast to machine-learning approaches that require time-costly training and optimization. We identify seven fundamental requirements for the implementation of semantic fusion: Action derivation, continuous feedback, context-sensitivity, temporal relation support, access to the interaction context, as well as the support of chronologically unsorted and probabilistic input. A subsequent analysis reveals, however, that there is currently no solution for fulfilling the latter two requirements. As the main contribution of this article, we thus present the Concurrent Cursor concept to compensate these shortcomings. In addition, we showcase a reference implementation, the Concurrent Augmented Transition Network (cATN), that validates the concept’s feasibility in a series of proof of concept demonstrations as well as through a comparative benchmark. The cATN fulfills all identified requirements and fills the lack amongst previous solutions. It supports the rapid prototyping of multimodal interfaces by means of five concrete traits: Its declarative nature, the recursiveness of the underlying transition network, the network abstraction constructs of its description language, the utilized semantic queries, and an abstraction layer for lexical information. Our reference implementation was and is used in various student projects, theses, as well as master-level courses. It is openly available and showcases that non-experts can effectively implement multimodal interfaces, even for non-trivial applications in mixed and virtual reality. KW - multimodal fusion KW - multimodal interface KW - semantic fusion KW - procedural fusion methods KW - natural interfaces KW - human-computer interaction Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197573 SN - 2414-4088 VL - 2 IS - 4 ER - TY - THES A1 - Betz, Christian T1 - Scalable authoring of diagnostic case based training systems T1 - Skalierbare Erstellung diagnostischer fallbasierter Trainingssysteme N2 - Diagnostic Case Based Training Systems (D-CBT) provide learners with a means to learn and exercise knowledge in a realistic context. In medical education, D-CBT Systems present virtual patients to the learners who are asked to examine, diagnose and state therapies for these patients. Due a number of conflicting and changing requirements, e.g. time for learning, authoring effort, several systems were developed so far. These systems range from simple, easy-to-use presentation systems to highly complex knowledge based systems supporting explorative learning. This thesis presents an approach and tools to create D-CBT systems from existing sources (documents, e.g. dismissal records) using existing tools (word processors): Authors annotate and extend the documents to model the knowledge. A scalable knowledge representation is able to capture the content on multiple levels, from simple to highly structured knowledge. Thus, authoring of D-CBT systems requires less prerequisites and pre-knowledge and is faster than approaches using specialized authoring environments. Also, authors can iteratively add and structure more knowledge to adapt training cases to their learners needs. The theses also discusses the application of the same approach to other domains, especially to knowledge acquisition for the Semantic Web. N2 - Fallbasierte diagnostische Trainingssysteme (FDT) ermöglichen es Lernern, Wissen durch Anwendung in einem realistischen Kontext zu erwerben und zu festigen. In der medizinischen Ausbildung präsentieren FDT Systeme virtuelle Patienten, an denen der Lerner die Auswahl und Interpretation der richtigen Untersuchungen, die Diagnostik und die Bestimmung geeigneter Therapien erlernen und üben kann. Eine Vielzahl von Anforderungen durch die Lerner und die Autoren solcher Systeme hat zur Entwicklung unterschiedlicher Trainingsumgebungen geführt. Darunter gibt es einfache, präsentationsorientierte Systeme ebenso wie komplexe wissensbasierte Systeme, die exploratives Lernern erlauben. Diese Dissertation untersucht einen Ansatz und Werkzeuge, um FDT Systeme aus vorhandenen Daten (d.h. Dokumenten, beispielsweise Entlassschreiben) und mit Hilfe bekannter Werkzeuge (d.h. Textverarbeitung) zu entwickeln: Die Autoren annotieren dazu die Dokumente, um die Fälle zu modellieren. Eine skalierbare Wissensrepräsentation kann das so extrahierte Wissen auf verschiedenen Ebenen erfassen, angefangen mit unstrukturierten Elementen bis zu Wissensmodellen mit kausalen Beziehungen. Autoren können mit Hilfe des vorgestellten Ansatzes fallbasierte diagnostische Trainingssysteme mit geringerem Vorwissen und schneller erstellen als mit Hilfe spezialisierter Autorensysteme. Dabei können die Autoren insbesondere die Fälle sukzessive mit weiterem Wissen anreichern und so auf die Anforderungen ihrer Lerner anpassen. In der Dissertation wird darüber hinaus die Anwendung des Ansatzes und der entstandenen Werkzeuge auf andere Domänen untersucht. Besonders interessant ist dabei die Anwendung in der Wissensakquisition für das Semantic Web. KW - Computerunterstütztes Lernen KW - Medizin KW - Wissensrepräsentation KW - Trainingssystem KW - agile Prozesse KW - Semantic Web KW - d3web.Train KW - knowledge representation KW - training systems KW - agile processes KW - semantic web KW - d3web.Train Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-17885 ER - TY - THES A1 - Busch, Stephan T1 - Robust, Flexible and Efficient Design for Miniature Satellite Systems T1 - Moderne Kleinstsatelliten - Zwischen Robustheit, Flexibilität und Effizienz N2 - Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology. This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg’s advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner. Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions. The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested. N2 - Miniaturisierte Satellitensysteme übernehmen zunehmend eine entscheidende Rolle in der fortschreitenden Globalisierung und Demokratisierung der Raumfahrt. Großes Innovationspotential und neue Kommerzialisierungschancen verspricht der effektive Einsatz von Kleinstsatelliten in zukünftigen fraktionierten Missionen für Erdbeobachtungs- und Kommunikationsanwendungen. Basierend auf vielen kleinen kooperierenden Systemen können diese Systeme zukünftig große multifunktionale Satelliten ergänzen oder ersetzen. Die Herausforderung bei der Entwicklung miniaturisierter Satellitensysteme ist die Gratwanderung zwischen der im Rahmen der Miniaturisierung notwendigen Effizienz, der für die Erfüllung der Mission geforderten Zuverlässigkeit und der wünschenswerten Wiederverwendbarkeit und Erweiterbarkeit zur Realisierung agiler Kleinstsatellitenserien. Diese Arbeit adressiert verschiedene Aspekte für den optimalen Entwurf robuster, flexibler und effizienter Kleinstsatelliten am Beispiel des UWE Pico-Satelliten Bus der Universität Würzburg. Mit dem Ziel der Entwicklung einer soliden Basisplattform für zukünftige Kleinstsatelliten-Formationen wurden entsprechende Designansätze im Rahmen des UWE-3 Projektes in einem integralen Designansatz konsistent umgesetzt. Neben der Entwicklung von effizienten Redundanzkonzepten mit minimalem Overhead für den optimalen Betrieb auf Ressourcen-limitierten Kleinstsatelliten wurde ein modularer Satellitenbus entworfen, der als eine robuste und erweiterbare Basis für zukünftige Missionen dienen soll. Damit realisiert UWE-3 eine der effizientesten Kleinstsatelliten-Architekturen die in den letzten Jahren in den Orbit gebracht wurde. Dargestellte Missionsergebnisse fassen den erfolgreichen Betrieb des Satelliten seit seinem Launch in Jahr 2013 zusammen. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 11 KW - Kleinsatellit KW - Fehlertoleranz KW - Miniaturisierung KW - Modularität KW - Picosatellite KW - Satellit Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-136523 SN - 978-3-945459-10-2 ER - TY - THES A1 - Herrmann, Christian T1 - Robotic Motion Compensation for Applications in Radiation Oncology T1 - Robotergestützte Bewegungskompensation für Anwendungen in der Radioonkologie N2 - Aufgrund vieler Verbesserungen der Behandlungsmethoden im Laufe der letzten 60 Jahre, erlaubt die Strahlentherapie heutzutage präzise Behandlungen von statischen Tumoren. Jedoch birgt die Bestrahlung von sich bewegenden Tumoren noch große Herausforderungen in sich, da bewegliche Tumore oft den Behandlungsstrahl verlassen. Dabei reduziert sich die Strahlendosis im Tumor während sich diese im umliegenden gesunden Gewebe erhöht. Diese Forschungsarbeit zielt darauf ab, die Grenzen der Strahlentherapie zu erweitern, um präzise Behandlungen von beweglichen Tumoren zu ermöglichen. Der Fokus der Arbeit liegt auf der Erstellung eines Echtzeitsystems zur aktiven Kompensation von Tumorbewegungen durch robotergestützte Methoden. Während Behandlungen befinden sich Patienten auf einer Patientenliege, mit der statische Lagerungsfehler vor Beginn einer Behandlung korrigiert werden. Die in dieser Arbeit verwendete Patientenliege "HexaPOD" ist ein paralleler Manipulator mit sechs Freiheitsgraden, der große Lasten innerhalb eines eingeschränkten Arbeitsbereichs präzise positionieren kann. Obwohl der HexaPOD ursprünglich nicht für dynamische Anwendungen konzipiert wurde, wird dieser für eine dauerhafte Bewegungskompensation eingesetzt, in dem Patienten so bewegt werden, dass Tumore präzise im Zentralstrahl während der Dauer einer gesamten Behandlung verbleiben. Um ein echtzeitfähiges Kompensationssystem auf Basis des HexaPODs zu realisieren, muss eine Reihe an Herausforderungen bewältigt werden. Echtzeitaspekte werden einerseits durch die Verwendung eines harten Echtzeitbetriebssystems abgedeckt, andererseits durch die Messung und Schätzung von Latenzzeiten aller physikalischen Größen im System, z.B. Messungen der Tumor- und Atemposition. Neben der konsistenten und durchgängigen Berücksichtigung von akkuraten Zeitinformation, werden alle software-induzierten Latenzen adaptiv ausgeglichen. Dies erfordert Vorhersagen der Tumorposition in die nahe Zukunft. Zahlreiche Prädiktoren zur Atem- und Tumorpositionsvorhersage werden vorgeschlagen und anhand verschiedenster Metriken evaluiert. Erweiterungen der Prädiktionsalgorithmen werden eingeführt, die sowohl Atem- als auch Tumorpositionsinformationen fusionieren, um Vorhersagen ohne explizites Korrelationsmodell zu ermöglichen. Die Vorhersagen bestimmen den zukünftigen Bewegungspfad des HexaPODs, um Tumorbewegungen zu kompensieren. Dazu werden verschiedene Regler entwickelt, die eine Trajektorienverfolgung mit dem HexaPOD ermöglichen. Auf der Basis von linearer und nicht-linearer dynamischer Modellierung des HexaPODs mit Methoden der Systemidentifikation, wird zunächst ein modellprädiktiver Regler entwickelt. Ein zweiter Regler wird auf Basis einer Annahme über das Arbeitsprinzip des internen Reglers im HexaPOD entworfen. Schließlich wird ein dritter Regler vorgeschlagen, der beide vorhergehenden Regler miteinander kombiniert. Für jeden dieser Regler werden vergleichende Ergebnisse aus Experimenten mit realer Hardware und menschlichen Versuchspersonen präsentiert und diskutiert. Darüber hinaus wird die geeignete Wahl von freien Parametern in den Reglern vorgestellt. Neben einer präzisen Verfolgung der Referenztrajektorie spielt der Patientenkomfort eine entscheidende Rolle für die Akzeptanz des Systems. Es wird gezeigt, dass die Regler glatte Trajektorien realisieren können, um zu garantieren, dass sich Patienten wohl fühlen während ihre Tumorbewegung mit Genauigkeiten im Submillimeterbereich ausgeglichen wird. Gesamtfehler werden im Kompensationssystem analysiert, in dem diese zu Trajektorienverfolgungsfehlern und Prädiktionsfehlern in Beziehung gesetzt werden. Durch Ausnutzung von Eigenschaften verschiedener Prädiktoren wird gezeigt, dass die Startzeit des Systems bis die Verfolgung der Referenztrajektorie erreicht ist, wenige Sekunden beträgt. Dies gilt insbesondere für den Fall eines initial ruhenden HexaPODs und ohne Vorwissen über Tumorbewegungen. Dies zeigt die Eignung des Systems für die sehr kurz fraktionierten Behandlungen von Lungentumoren. Das Tumorkompensationssystem wurde ausschließlich auf Basis von klinischer Standard-Hardware entwickelt, die in vielen Behandlungsräumen zu finden ist. Durch ein einfaches und flexibles Design können Behandlungsräume in kosteneffizienter Weise um Möglichkeiten der Bewegungskompensation ergänzt werden. Darüber hinaus werden aktuelle Behandlungsmethoden wie intensitätsmodulierte Strahlentherapie oder Volumetric Modulated Arc Therapy in keiner Weise eingeschränkt. Aufgrund der Unterstützung verschiedener Kompensationsmodi kann das System auf alle beweglichen Tumore angewendet werden, unabhängig davon ob die Bewegungen vorhersagbar (Lungentumore) oder nicht vorhersagbar (Prostatatumore) sind. Durch Integration von geeigneten Methoden zur Tumorpositionsbestimmung kann das System auf einfache Weise zur Kompensation von anderen Tumoren erweitert werden. N2 - Radiation therapy today, on account of improvements in treatment procedures over the last 60 years, allows precise treatment of static tumors inside the human body. However, irradiation of moving tumors is still a challenging task as moving tumors often leave the treatment beam and the radiation dose delivered to the tumor reduces simultaneously increasing that on healthy tissue. This research work aims to push the frontiers of radiation therapy in order to enable precise treatment of moving tumors with focus on research and development of a unique real-time system enabling active motion compensation through robotic means to compensate tumor motion. During treatment, patients lie on a treatment couch which is normally used for static position corrections of patient set-up errors prior to radiation treatment. The treatment couch used, called HexaPOD, is a parallel manipulator with six degrees of freedom which can precisely position heavy loads inside a small region. Despite the HexaPOD not initially built with dynamics in mind, it is used in this work for sustained motion compensation by moving patients such that tumors stay precisely located at the center of the treatment beam during the complete course of treatment. In order to realize real-time tumor motion compensation by means of the HexaPOD, several challanges need to be addressed. Real-time aspects are covered by the adoption of a hard real-time operation system in combination with measurement and estimation of latencies of all physical quantities in the compensation system such as tumor or breathing position measurements. Accurate timing information is respected consistently in the whole system and all software-induced latencies are adaptively compensated for. This requires knowledge of future tumor positions from predictors. Several predictors for breathing and tumor motion predictions are proposed and evaluated in terms of a variety of different performance metrics. Extensions to prediction algorithms are introduced fusing both breathing and tumor position information to allow for predictions without the need of an explicit correlation model. Predictions determine the future motion path of the HexaPOD in order to compensate for tumor motion. Several control schemes are developed to enable reference tracking for the HexaPOD. Based on linear and non-linear dynamic modelling of the HexaPOD with system identification methods, a first controller is derived in the form of a model predictive controller. A second controller is proposed based on an assumption of the working principle of the HexaPOD's internal controller. Finally, a third controller is derived as combination of the first and second one. For each of these controllers, comparative results with real hardware experiments and humans in the loop as well as choices of free parameters are presented and discussed. Apart from precise tracking, emphasis is placed on patient comfort which is of crucial importance for acceptance of the system. It is demonstrated that smooth trajectories can be realized by the controllers to guarantee that patients feel comfortable while their tumor motion is compensated at sub-millimeter accuracies. Overall errors of the system are analyzed by relating them to tracking and prediction errors. By exploiting the properties of different predictors, it is shown that the startup time until tracking is reached can be reduced to only a few seconds, even in the case of an initially at-rest HexaPOD and with no initial knowledge of tumor motion. This makes the system especially suitable for the relatively short-fractionated treatment sessions for lung tumors. The tumor motion compensation system has been developed solely based on standard clinical hardware, found in most treatment rooms. With a simple and flexible design, existing treatment can be updated in a cost-efficient way to introduce motion compensation capabilities. Simultaneously, the system does not impose any constraints on state-of-the-art treatment types such as intensity modulated radiotherapy or volumetric modulated arc therapy. Supporting different compensation modes, the system can be applied to any moving tumor whether its motion is predictable (lung tumors) or unpredictable (prostate tumors). By integration of adequate tumor position determination methods, the system can be easily extended to other tumors as well. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 7 KW - Robotik KW - Bewegungskompensation KW - Regelung KW - Strahlentherapie KW - Vorhersage KW - Tumorbewegung KW - Echzeit KW - Prediction KW - Tumor motion KW - Real-time Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-79045 SN - 978-3-923959-88-4 ER - TY - RPRT A1 - Elsayed, Karim A1 - Rizk, Amr T1 - Response Times in Time-to-Live Caching Hierarchies under Random Network Delays T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Time-to-Live (TTL) caches decouple the occupancy of objects in cache through object-specific validity timers. Stateof- the art techniques provide exact methods for the calculation of object-specific hit probabilities given entire cache hierarchies with random inter-cache network delays. The system hit probability is a provider-centric metric as it relates to the origin offload, i.e., the decrease in the number of requests that are served by the content origin server. In this paper we consider a user-centric metric, i.e., the response time, which is shown to be structurally different from the system hit probability. Equipped with the state-of-theart exact modeling technique using Markov-arrival processes we derive expressions for the expected object response time and pave a way for its optimization under network delays. KW - Datennetz KW - TTL Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280843 ER - TY - THES A1 - Martin, Rüdiger T1 - Resilience, Provisioning, and Control for the Network of the Future T1 - Ausfallsicherheit, Dimensionierungsansätze und Kontrollmechanismen für das Netz der Zukunft N2 - The Internet sees an ongoing transformation process from a single best-effort service network into a multi-service network. In addition to traditional applications like e-mail,WWW-traffic, or file transfer, future generation networks (FGNs) will carry services with real-time constraints and stringent availability and reliability requirements like Voice over IP (VoIP), video conferencing, virtual private networks (VPNs) for finance, other real-time business applications, tele-medicine, or tele-robotics. Hence, quality of service (QoS) guarantees and resilience to failures are crucial characteristics of an FGN architecture. At the same time, network operations must be efficient. This necessitates sophisticated mechanisms for the provisioning and the control of future communication infrastructures. In this work we investigate such echanisms for resilient FGNs. There are many aspects of the provisioning and control of resilient FGNs such as traffic matrix estimation, traffic characterization, traffic forecasting, mechanisms for QoS enforcement also during failure cases, resilient routing, or calability concerns for future routing and addressing mechanisms. In this work we focus on three important aspects for which performance analysis can deliver substantial insights: load balancing for multipath Internet routing, fast resilience concepts, and advanced dimensioning techniques for resilient networks. Routing in modern communication networks is often based on multipath structures, e.g., equal-cost multipath routing (ECMP) in IP networks, to facilitate traffic engineering and resiliency. When multipath routing is applied, load balancing algorithms distribute the traffic over available paths towards the destination according to pre-configured distribution values. State-of-the-art load balancing algorithms operate either on the packet or the flow level. Packet level mechanisms achieve highly accurate traffic distributions, but are known to have negative effects on the performance of transport protocols and should not be applied. Flow level mechanisms avoid performance degradations, but at the expense of reduced accuracy. These inaccuracies may have unpredictable effects on link capacity requirements and complicate resource management. Thus, it is important to exactly understand the accuracy and dynamics of load balancing algorithms in order to be able to exercise better network control. Knowing about their weaknesses, it is also important to look for alternatives and to assess their applicability in different networking scenarios. This is the first aspect of this work. Component failures are inevitable during the operation of communication networks and lead to routing disruptions if no special precautions are taken. In case of a failure, the robust shortest-path routing of the Internet reconverges after some time to a state where all nodes are again reachable – provided physical connectivity still exists. But stringent availability and reliability criteria of new services make a fast reaction to failures obligatory for resilient FGNs. This led to the development of fast reroute (FRR) concepts for MPLS and IP routing. The operations of MPLS-FRR have already been standardized. Still, the standards leave some degrees of freedom for the resilient path layout and it is important to understand the tradeoffs between different options for the path layout to efficiently provision resilient FGNs. In contrast, the standardization for IP-FRR is an ongoing process. The applicability and possible combinations of different concepts still are open issues. IP-FRR also facilitates a comprehensive resilience framework for IP routing covering all steps of the failure recovery cycle. These points constitute another aspect of this work. Finally, communication networks are usually over-provisioned, i.e., they have much more capacity installed than actually required during normal operation. This is a precaution for various challenges such as network element failures. An alternative to this capacity overprovisioning (CO) approach is admission control (AC). AC blocks new flows in case of imminent overload due to unanticipated events to protect the QoS for already admitted flows. On the one hand, CO is generally viewed as a simple mechanism, AC as a more complex mechanism that complicates the network control plane and raises interoperability issues. On the other hand, AC appears more cost-efficient than CO. To obtain advanced provisioning methods for resilient FGNs, it is important to find suitable models for irregular events, such as failures and different sources of overload, and to incorporate them into capacity dimensioning methods. This allows for a fair comparison between CO and AC in various situations and yields a better understanding of the strengths and weaknesses of both concepts. Such an advanced capacity dimensioning method for resilient FGNs represents the third aspect of this work. N2 - Das Internet befindet sich gegenwärtig in einem Transformationsprozess von einem Netz mit einer einzigen best-effort Dienstklasse hin zu einem Mehr-Dienste-Netz. Zusätzlich zu herkömmlichen Anwendungen wie E-Mail, WWW oder Datenübertragung werden zukünftige Netze Dienste mit Echtzeitbedürfnissen und strikten Anforderungen an Verfügbarkeit und Zuverlässigkeit wie Voice over IP (VoIP), Videokonferenzdienste, Virtual Private Networks (VPNs) für Finanzanwendungen und andere Geschäftsanwendungen mit Echtzeitanforderungen, Tele-Medizin oder Telerobotik tragen. Daher sind die Gewährleistung von Dienstgüte und Ausfallsicherheit wesentliche Merkmale zukünftiger Netzarchitekturen. Gleichzeitig muss der Netzbetrieb effizient sein. Dies zieht den Bedarf an ausgefeilten Mechanismen für die Dimensionierung und Kontrolle ausfallsicherer Kommunikationsstrukturen nach sich. In dieser Arbeit werden solche Mechanismen, nämlich Lastaufteilung, Konzepte zur schnellen Reaktion im Fehlerfall und intelligente Ansätze zur Netzdimensionierung, untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/08 KW - Backbone-Netz KW - load balancing KW - resilience KW - fast reroute KW - admission control KW - overprovisioning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28497 ER - TY - RPRT A1 - Gallenmüller, Sebastian A1 - Scholz, Dominik A1 - Stubbe, Henning A1 - Hauser, Eric A1 - Carle, Georg T1 - Reproducible by Design: Network Experiments with pos T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - In scientific research, the independent reproduction of experiments is the source of trust. Detailed documentation is required to enable experiment reproduction. Reproducibility awards were created to honor the increased documentation effort. In this work, we propose a novel approach toward reproducible research—a structured experimental workflow that allows the creation of reproducible experiments without requiring additional efforts of the researcher. Moreover, we present our own testbed and toolchain, namely, plain orchestrating service (pos), which enables the creation of such experimental workflows. The experiment is documented by our proposed, fully scripted experiment structure. In addition, pos provides scripts enabling the automation of the bundling and release of all experimental artifacts. We provide an interactive environment where pos experiments can be executed and reproduced, available at https://gallenmu.github.io/single-server-experiment. KW - Datennetz KW - Reproducibility KW - Testbed KW - Network Experiments KW - plain orchestrating service KW - pos Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280834 ER - TY - THES A1 - Schlosser, Daniel T1 - Quality of Experience Management in Virtual Future Networks T1 - Netzwerkmanagement unter Berücksichtigung der vom Benutzer erfahrenen Dienstgüte in virtuellen zukünftigen Netzen N2 - Aktuell beobachten wir eine drastische Vervielfältigung der Dienste und Anwendungen, die das Internet für den Datentransport nutzen. Dabei unterscheiden sich die Anforderungen dieser Dienste an das Netzwerk deutlich. Das Netzwerkmanagement wird durch diese Diversität der nutzenden Dienste aber deutlich erschwert, da es einem Datentransportdienstleister kaum möglich ist, die unterschiedlichen Verbindungen zu unterscheiden, ohne den Inhalt der transportierten Daten zu analysieren. Netzwerkvirtualisierung ist eine vielversprechende Lösung für dieses Problem, da sie es ermöglicht für verschiedene Dienste unterschiedliche virtuelle Netze auf dem gleichen physikalischen Substrat zu betreiben. Diese Diensttrennung ermöglicht es, jedes einzelne Netz anwendungsspezifisch zu steuern. Ziel einer solchen Netzsteuerung ist es, sowohl die vom Nutzer erfahrene Dienstgüte als auch die Kosteneffizienz des Datentransports zu optimieren. Darüber hinaus wird es mit Netzwerkvirtualisierung möglich das physikalische Netz so weit zu abstrahieren, dass die aktuell fest verzahnten Rollen von Netzwerkbesitzer und Netzwerkbetreiber entkoppelt werden können. Darüber hinaus stellt Netzwerkvirtualisierung sicher, dass unterschiedliche Datennetze, die gleichzeitig auf dem gleichen physikalischen Netz betrieben werden, sich gegenseitig weder beeinflussen noch stören können. Diese Arbeit  beschäftigt sich mit ausgewählten Aspekten dieses Themenkomplexes und fokussiert sich darauf, ein virtuelles Netzwerk mit bestmöglicher Dienstqualität für den Nutzer zu betreiben und zu steuern. Dafür wird ein Top-down-Ansatz gewählt, der von den Anwendungsfällen, einer möglichen Netzwerkvirtualisierungs-Architektur und aktuellen Möglichkeiten der Hardwarevirtualisierung ausgeht. Im Weiteren fokussiert sich die Arbeit dann in Richtung Bestimmung und Optimierung der vom Nutzer erfahrenen Dienstqualität (QoE) auf Applikationsschicht und diskutiert Möglichkeiten zur Messung und Überwachung von wesentlichen Netzparametern in virtualisierten Netzen. N2 - Currently, we observe a strong growth of services and applications, which use the Internet for data transport. However, the network requirements of these applications differ significantly. This makes network management difficult, since it complicated to separate network flows into application classes without inspecting application layer data. Network virtualization is a promising solution to this problem. It enables running different virtual network on the same physical substrate. Separating networks based on the service supported within allows controlling each network according to the specific needs of the application. The aim of such a network control is to optimize the user perceived quality as well as the cost efficiency of the data transport. Furthermore, network virtualization abstracts the network functionality from the underlying implementation and facilitates the split of the currently tightly integrated roles of Internet Service Provider and network owner. Additionally, network virtualization guarantees that different virtual networks run on the same physical substrate do not interfere with each other. This thesis discusses different aspects of the network virtualization topic. It is focused on how to manage and control a virtual network to guarantee the best Quality of Experience for the user. Therefore, a top-down approach is chosen. Starting with use cases of virtual networks, a possible architecture is derived and current implementation options based on hardware virtualization are explored. In the following, this thesis focuses on assessing the Quality of Experience perceived by the user and how it can be optimized on application layer. Furthermore, options for measuring and monitoring significant network parameters of virtual networks are considered. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/12 KW - Netzwerkmanagement KW - Dienstgüte KW - Netzwerkvirtualisierung KW - QoS KW - QoE KW - Network Virtualization KW - Quality of Experience KW - Network Management KW - Quality of Service Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69986 ER - TY - JOUR A1 - Koopmann, Tobias A1 - Stubbemann, Maximilian A1 - Kapa, Matthias A1 - Paris, Michael A1 - Buenstorf, Guido A1 - Hanika, Tom A1 - Hotho, Andreas A1 - Jäschke, Robert A1 - Stumme, Gerd T1 - Proximity dimensions and the emergence of collaboration: a HypTrails study on German AI research JF - Scientometrics N2 - Creation and exchange of knowledge depends on collaboration. Recent work has suggested that the emergence of collaboration frequently relies on geographic proximity. However, being co-located tends to be associated with other dimensions of proximity, such as social ties or a shared organizational environment. To account for such factors, multiple dimensions of proximity have been proposed, including cognitive, institutional, organizational, social and geographical proximity. Since they strongly interrelate, disentangling these dimensions and their respective impact on collaboration is challenging. To address this issue, we propose various methods for measuring different dimensions of proximity. We then present an approach to compare and rank them with respect to the extent to which they indicate co-publications and co-inventions. We adapt the HypTrails approach, which was originally developed to explain human navigation, to co-author and co-inventor graphs. We evaluate this approach on a subset of the German research community, specifically academic authors and inventors active in research on artificial intelligence (AI). We find that social proximity and cognitive proximity are more important for the emergence of collaboration than geographic proximity. KW - collaboration KW - dimensions of proximity KW - co-authorships KW - co-inventorships KW - embedding techniques Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269831 SN - 1588-2861 VL - 126 IS - 12 ER - TY - CHAP ED - von Mammen, Sebastian ED - Klemke, Roland ED - Lorber, Martin T1 - Proceedings of the 1st Games Technology Summit BT - part of Clash of Realites 11th International Conference on the Technology and Theory of Digital Games N2 - As part of the Clash of Realities International Conference on the Technology and Theory of Digital Games, the Game Technology Summit is a premium venue to bring together experts from academia and industry to disseminate state-of-the-art research on trending technology topics in digital games. In this first iteration of the Game Technology Summit, we specifically paid attention on how the successes in AI in Natural User Interfaces have been impacting the games industry (industry track) and which scientific, state-of-the-art ideas and approaches are currently pursued (scientific track). KW - Veranstaltung KW - Künstliche Intelligenz KW - Mensch-Maschine-Kommunikation KW - Computerspiel KW - natural user interfaces KW - artificial intelligence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245776 SN - 978-3-945459-36-2 ER -