TY - RPRT A1 - Lhamo, Osel A1 - Nguyen, Giang T. A1 - Fitzek, Frank H. P. T1 - Virtual Queues for QoS Compliance of Haptic Data Streams in Teleoperation T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Tactile Internet aims at allowing perceived real-time interactions between humans and machines. This requires satisfying a stringent latency requirement of haptic data streams whose data rates vary drastically as the results of perceptual codecs. This introduces a complex problem for the underlying network infrastructure to fulfill the pre-defined level of Quality of Service (QoS). However, novel networking hardware with data plane programming capability allows processing packets differently and opens up a new opportunity. For example, a dynamic and network-aware resource management strategy can help satisfy the QoS requirements of different priority flows without wasting precious bandwidth. This paper introduces virtual queues for service differentiation between different types of traffic streams, leveraging protocol independent switch architecture (PISA). We propose coordinating the management of all the queues and dynamically adapting their sizes to minimize packet loss and delay due to network congestion and ensure QoS compliance. KW - Datennetz KW - data plane programming KW - software defined network KW - P4 KW - virtual queue KW - haptic data Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280762 ER - TY - RPRT A1 - Vomhoff, Viktoria A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Identification of Signaling Patterns in Mobile IoT Signaling Traffic T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - We attempt to identify sequences of signaling dialogs, to strengthen our understanding of the signaling behavior of IoT devices by examining a dataset containing over 270.000 distinct IoT devices whose signaling traffic has been observed over a 31-day period in a 2G network [4]. We propose a set of rules that allows the assembly of signaling dialogs into so-called sessions in order to identify common patterns and lay the foundation for future research in the areas of traffic modeling and anomaly detection. KW - Datennetz KW - IoT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280819 ER - TY - GEN A1 - Funken, Matthias A1 - Tscherner, Michael T1 - Jahresbericht 2018 des Rechenzentrums der Universität Würzburg T1 - Annual Report 2018 of the Computer Center, University of Wuerzburg N2 - Eine Übersicht über die Aktivitäten des Rechenzentrums im Jahr 2018. T3 - Jahresbericht des Rechenzentrums der Universität Würzburg - 2018 KW - Julius-Maximilians-Universität Würzburg KW - Jahresbericht KW - Jahresbericht KW - Rechenzentrum KW - RZUW KW - annual report KW - Computer Center University of Wuerzburg Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-188265 UR - https://www.rz.uni-wuerzburg.de/wir/publikationen/ ET - 1. Auflage ER - TY - GEN T1 - Jahresbericht 2016 des Rechenzentrums der Universität Würzburg T1 - Annual Report 2016 of the Computer Center, University of Wuerzburg N2 - Das Dokument umfasst eine jährliche Zusammenfassung der Aktivitäten des Rechenzentrums als zentraler IT-Dienstleister der Universität Würzburg T3 - Jahresbericht des Rechenzentrums der Universität Würzburg - 2016 KW - Jahresbericht KW - Julius-Maximilians-Universität Würzburg KW - Rechenzentrum KW - annual report KW - Computer Center University of Wuerzburg KW - RZUW Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-153558 UR - https://www.rz.uni-wuerzburg.de/wir/publikationen/ ET - 1. Auflage ER - TY - GEN A1 - Funken, Matthias A1 - Tscherner, Michael T1 - Jahresbericht 2017 des Rechenzentrums der Universität Würzburg T1 - Annual Report 2017 of the Computer Center, University of Wuerzburg N2 - Eine Übersicht über die Aktivitäten des Rechenzentrums im Jahr 2017. T3 - Jahresbericht des Rechenzentrums der Universität Würzburg - 2017 KW - Julius-Maximilians-Universität Würzburg KW - RZUW KW - Jahresbericht KW - Rechenzentrum KW - Computer Center University of Wuerzburg KW - annual report Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-168537 UR - https://www.rz.uni-wuerzburg.de/wir/publikationen/ ET - 1. Auflage ER - TY - JOUR A1 - Scherer, Marc A1 - Fleishman, Sarel J. A1 - Jones, Patrik R. A1 - Dandekar, Thomas A1 - Bencurova, Elena T1 - Computational Enzyme Engineering Pipelines for Optimized Production of Renewable Chemicals JF - Frontiers in Bioengineering and Biotechnology N2 - To enable a sustainable supply of chemicals, novel biotechnological solutions are required that replace the reliance on fossil resources. One potential solution is to utilize tailored biosynthetic modules for the metabolic conversion of CO2 or organic waste to chemicals and fuel by microorganisms. Currently, it is challenging to commercialize biotechnological processes for renewable chemical biomanufacturing because of a lack of highly active and specific biocatalysts. As experimental methods to engineer biocatalysts are time- and cost-intensive, it is important to establish efficient and reliable computational tools that can speed up the identification or optimization of selective, highly active, and stable enzyme variants for utilization in the biotechnological industry. Here, we review and suggest combinations of effective state-of-the-art software and online tools available for computational enzyme engineering pipelines to optimize metabolic pathways for the biosynthesis of renewable chemicals. Using examples relevant for biotechnology, we explain the underlying principles of enzyme engineering and design and illuminate future directions for automated optimization of biocatalysts for the assembly of synthetic metabolic pathways. KW - computational KW - enzyme KW - engineering KW - design KW - biomanufacturing KW - biofuel KW - microbes KW - metabolism Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240598 SN - 2296-4185 VL - 9 ER - TY - JOUR A1 - Kammerer, Klaus A1 - Göster, Manuel A1 - Reichert, Manfred A1 - Pryss, Rüdiger T1 - Ambalytics: a scalable and distributed system architecture concept for bibliometric network analyses JF - Future Internet N2 - A deep understanding about a field of research is valuable for academic researchers. In addition to technical knowledge, this includes knowledge about subareas, open research questions, and social communities (networks) of individuals and organizations within a given field. With bibliometric analyses, researchers can acquire quantitatively valuable knowledge about a research area by using bibliographic information on academic publications provided by bibliographic data providers. Bibliometric analyses include the calculation of bibliometric networks to describe affiliations or similarities of bibliometric entities (e.g., authors) and group them into clusters representing subareas or communities. Calculating and visualizing bibliometric networks is a nontrivial and time-consuming data science task that requires highly skilled individuals. In addition to domain knowledge, researchers must often provide statistical knowledge and programming skills or use software tools having limited functionality and usability. In this paper, we present the ambalytics bibliometric platform, which reduces the complexity of bibliometric network analysis and the visualization of results. It accompanies users through the process of bibliometric analysis and eliminates the need for individuals to have programming skills and statistical knowledge, while preserving advanced functionality, such as algorithm parameterization, for experts. As a proof-of-concept, and as an example of bibliometric analyses outcomes, the calculation of research fronts networks based on a hybrid similarity approach is shown. Being designed to scale, ambalytics makes use of distributed systems concepts and technologies. It is based on the microservice architecture concept and uses the Kubernetes framework for orchestration. This paper presents the initial building block of a comprehensive bibliometric analysis platform called ambalytics, which aims at a high usability for users as well as scalability. KW - system architecture design KW - bibliometric analysis KW - community detection Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-244916 SN - 1999-5903 VL - 13 IS - 8 ER - TY - JOUR A1 - Oberdörfer, Sebastian A1 - Birnstiel, Sandra A1 - Latoschik, Marc Erich A1 - Grafe, Silke T1 - Mutual Benefits: Interdisciplinary Education of Pre-Service Teachers and HCI Students in VR/AR Learning Environment Design JF - Frontiers in Education N2 - The successful development and classroom integration of Virtual (VR) and Augmented Reality (AR) learning environments requires competencies and content knowledge with respect to media didactics and the respective technologies. The paper discusses a pedagogical concept specifically aiming at the interdisciplinary education of pre-service teachers in collaboration with human-computer interaction students. The students’ overarching goal is the interdisciplinary realization and integration of VR/AR learning environments in teaching and learning concepts. To assist this approach, we developed a specific tutorial guiding the developmental process. We evaluate and validate the effectiveness of the overall pedagogical concept by analyzing the change in attitudes regarding 1) the use of VR/AR for educational purposes and in competencies and content knowledge regarding 2) media didactics and 3) technology. Our results indicate a significant improvement in the knowledge of media didactics and technology. We further report on four STEM learning environments that have been developed during the seminar. KW - interdisciplinary education KW - virtual reality KW - augmented reality KW - serious games KW - learning environments KW - teacher education Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241612 SN - 2504-284X VL - 6 ER - TY - JOUR A1 - Nagler, Matthias A1 - Nägele, Thomas A1 - Gilli, Christian A1 - Fragner, Lena A1 - Korte, Arthur A1 - Platzer, Alexander A1 - Farlow, Ashley A1 - Nordborg, Magnus A1 - Weckwerth, Wolfram T1 - Eco-Metabolomics and Metabolic Modeling: Making the Leap From Model Systems in the Lab to Native Populations in the Field JF - Frontiers in Plant Science N2 - Experimental high-throughput analysis of molecular networks is a central approach to characterize the adaptation of plant metabolism to the environment. However, recent studies have demonstrated that it is hardly possible to predict in situ metabolic phenotypes from experiments under controlled conditions, such as growth chambers or greenhouses. This is particularly due to the high molecular variance of in situ samples induced by environmental fluctuations. An approach of functional metabolome interpretation of field samples would be desirable in order to be able to identify and trace back the impact of environmental changes on plant metabolism. To test the applicability of metabolomics studies for a characterization of plant populations in the field, we have identified and analyzed in situ samples of nearby grown natural populations of Arabidopsis thaliana in Austria. A. thaliana is the primary molecular biological model system in plant biology with one of the best functionally annotated genomes representing a reference system for all other plant genome projects. The genomes of these novel natural populations were sequenced and phylogenetically compared to a comprehensive genome database of A. thaliana ecotypes. Experimental results on primary and secondary metabolite profiling and genotypic variation were functionally integrated by a data mining strategy, which combines statistical output of metabolomics data with genome-derived biochemical pathway reconstruction and metabolic modeling. Correlations of biochemical model predictions and population-specific genetic variation indicated varying strategies of metabolic regulation on a population level which enabled the direct comparison, differentiation, and prediction of metabolic adaptation of the same species to different habitats. These differences were most pronounced at organic and amino acid metabolism as well as at the interface of primary and secondary metabolism and allowed for the direct classification of population-specific metabolic phenotypes within geographically contiguous sampling sites. KW - eco-metabolomics KW - in situ analysis KW - metabolomics KW - metabolic modeling KW - SNP KW - natural variation KW - Jacobian matrix KW - green systems biology Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-189560 SN - 1664-462X VL - 9 IS - 1556 ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DLTPulseGenerator: a library for the simulation of lifetime spectra based on detector-output pulses JF - SoftwareX N2 - The quantitative analysis of lifetime spectra relevant in both life and materials sciences presents one of the ill-posed inverse problems and, hence, leads to most stringent requirements on the hardware specifications and the analysis algorithms. Here we present DLTPulseGenerator, a library written in native C++ 11, which provides a simulation of lifetime spectra according to the measurement setup. The simulation is based on pairs of non-TTL detector output-pulses. Those pulses require the Constant Fraction Principle (CFD) for the determination of the exact timing signal and, thus, the calculation of the time difference i.e. the lifetime. To verify the functionality, simulation results were compared to experimentally obtained data using Positron Annihilation Lifetime Spectroscopy (PALS) on pure tin. KW - lifetime spectroscopy KW - signal processing KW - pulse simulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176883 VL - 7 ER - TY - THES A1 - Hochmuth, Christian Andreas T1 - Innovative Software in Unternehmen: Strategie und Erfolgsfaktoren für Einführungsprojekte T1 - Innovative Software in Companies: Strategy and Success Factors for Implementation Projects N2 - Innovative Software kann die Position eines Unternehmens im Wettbewerb sichern. Die Einführung innovativer Software ist aber alles andere als einfach. Denn obgleich die technischen Aspekte offensichtlicher sind, dominieren organisationale Aspekte. Zu viele Softwareprojekte schlagen fehl, da die Einführung nicht gelingt, trotz Erfüllung technischer Anforderungen. Vor diesem Hintergrund ist das Forschungsziel der Masterarbeit, Risiken und Erfolgsfaktoren für die Einführung innovativer Software in Unternehmen zu finden, eine Strategie zu formulieren und dabei die Bedeutung von Schlüsselpersonen zu bestimmen. N2 - Innovative software can secure the position of a company among the competition. The implementation of innovative software is, however, anything but simple. Although the technical aspects are more obvious, this is because organizational aspects are predominant. Too many software projects fail because the implementation does not succeed, despite meeting technical requirements. In this light, the research objective of the master's thesis is to find risks and success factors for the implementation of innovative software in companies, to formulate a strategy and in this process to determine the importance of key persons. KW - Innovationsmanagement KW - Projektmanagement KW - Softwareentwicklung KW - Anforderungsmanagement KW - Risikomanagement KW - Innovation Management KW - Project Management KW - Software Engineering KW - Requirements Management KW - Risk Management Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-288411 N1 - Submitted on 15 September 2011, defended on 7 October 2011 ER - TY - JOUR A1 - Osmanoglu, Özge A1 - Khaled AlSeiari, Mariam A1 - AlKhoori, Hasa Abduljaleel A1 - Shams, Shabana A1 - Bencurova, Elena A1 - Dandekar, Thomas A1 - Naseem, Muhammad T1 - Topological Analysis of the Carbon-Concentrating CETCH Cycle and a Photorespiratory Bypass Reveals Boosted CO\(_2\)-Sequestration by Plants JF - Frontiers in Bioengineering and Biotechnology N2 - Synthetically designed alternative photorespiratory pathways increase the biomass of tobacco and rice plants. Likewise, some in planta–tested synthetic carbon-concentrating cycles (CCCs) hold promise to increase plant biomass while diminishing atmospheric carbon dioxide burden. Taking these individual contributions into account, we hypothesize that the integration of bypasses and CCCs will further increase plant productivity. To test this in silico, we reconstructed a metabolic model by integrating photorespiration and photosynthesis with the synthetically designed alternative pathway 3 (AP3) enzymes and transporters. We calculated fluxes of the native plant system and those of AP3 combined with the inhibition of the glycolate/glycerate transporter by using the YANAsquare package. The activity values corresponding to each enzyme in photosynthesis, photorespiration, and for synthetically designed alternative pathways were estimated. Next, we modeled the effect of the crotonyl-CoA/ethylmalonyl-CoA/hydroxybutyryl-CoA cycle (CETCH), which is a set of natural and synthetically designed enzymes that fix CO₂ manifold more than the native Calvin–Benson–Bassham (CBB) cycle. We compared estimated fluxes across various pathways in the native model and under an introduced CETCH cycle. Moreover, we combined CETCH and AP3-w/plgg1RNAi, and calculated the fluxes. We anticipate higher carbon dioxide–harvesting potential in plants with an AP3 bypass and CETCH–AP3 combination. We discuss the in vivo implementation of these strategies for the improvement of C3 plants and in natural high carbon harvesters. KW - CO2-sequestration KW - photorespiration KW - elementary modes KW - synthetic pathways KW - carboxylation KW - metabolic modeling KW - CETCH cycle Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-249260 SN - 2296-4185 VL - 9 ER - TY - JOUR A1 - von Mammen, Sebastian Albrecht A1 - Wagner, Daniel A1 - Knote, Andreas A1 - Taskin, Umut T1 - Interactive simulations of biohybrid systems JF - Frontiers in Robotics and AI N2 - In this article, we present approaches to interactive simulations of biohybrid systems. These simulations are comprised of two major computational components: (1) agent-based developmental models that retrace organismal growth and unfolding of technical scaffoldings and (2) interfaces to explore these models interactively. Simulations of biohybrid systems allow us to fast forward and experience their evolution over time based on our design decisions involving the choice, configuration and initial states of the deployed biological and robotic actors as well as their interplay with the environment. We briefly introduce the concept of swarm grammars, an agent-based extension of L-systems for retracing growth processes and structural artifacts. Next, we review an early augmented reality prototype for designing and projecting biohybrid system simulations into real space. In addition to models that retrace plant behaviors, we specify swarm grammar agents to braid structures in a self-organizing manner. Based on this model, both robotic and plant-driven braiding processes can be experienced and explored in virtual worlds. We present an according user interface for use in virtual reality. As we present interactive models concerning rather diverse description levels, we only ensured their principal capacity for interaction but did not consider efficiency analyzes beyond prototypic operation. We conclude this article with an outlook on future works on melding reality and virtuality to drive the design and deployment of biohybrid systems. KW - biohybrid systems KW - augmented reality KW - virtual reality KW - user interfaces KW - biological development KW - generative systems Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-195755 SN - 2296-9144 VL - 4 ER - TY - JOUR A1 - Appel, Mirjam A1 - Scholz, Claus-Jürgen A1 - Müller, Tobias A1 - Dittrich, Marcus A1 - König, Christian A1 - Bockstaller, Marie A1 - Oguz, Tuba A1 - Khalili, Afshin A1 - Antwi-Adjei, Emmanuel A1 - Schauer, Tamas A1 - Margulies, Carla A1 - Tanimoto, Hiromu A1 - Yarali, Ayse T1 - Genome-Wide Association Analyses Point to Candidate Genes for Electric Shock Avoidance in Drosophila melanogaster JF - PLoS ONE N2 - Electric shock is a common stimulus for nociception-research and the most widely used reinforcement in aversive associative learning experiments. Yet, nothing is known about the mechanisms it recruits at the periphery. To help fill this gap, we undertook a genome-wide association analysis using 38 inbred Drosophila melanogaster strains, which avoided shock to varying extents. We identified 514 genes whose expression levels and/or sequences covaried with shock avoidance scores. We independently scrutinized 14 of these genes using mutants, validating the effect of 7 of them on shock avoidance. This emphasizes the value of our candidate gene list as a guide for follow-up research. In addition, by integrating our association results with external protein-protein interaction data we obtained a shock avoidance- associated network of 38 genes. Both this network and the original candidate list contained a substantial number of genes that affect mechanosensory bristles, which are hairlike organs distributed across the fly's body. These results may point to a potential role for mechanosensory bristles in shock sensation. Thus, we not only provide a first list of candidate genes for shock avoidance, but also point to an interesting new hypothesis on nociceptive mechanisms. KW - functional analysis KW - disruption project KW - natural variation KW - complex traits KW - networks KW - behavior KW - flies KW - temperature KW - genetics KW - painful Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-152006 VL - 10 IS - 5 ER - TY - JOUR A1 - Fisseler, Denis A1 - Müller, Gerfrid G. W. A1 - Weichert, Frank T1 - Web-Based scientific exploration and analysis of 3D scanned cuneiform datasets for collaborative research JF - Informatics N2 - The three-dimensional cuneiform script is one of the oldest known writing systems and a central object of research in Ancient Near Eastern Studies and Hittitology. An important step towards the understanding of the cuneiform script is the provision of opportunities and tools for joint analysis. This paper presents an approach that contributes to this challenge: a collaborative compatible web-based scientific exploration and analysis of 3D scanned cuneiform fragments. The WebGL -based concept incorporates methods for compressed web-based content delivery of large 3D datasets and high quality visualization. To maximize accessibility and to promote acceptance of 3D techniques in the field of Hittitology, the introduced concept is integrated into the Hethitologie-Portal Mainz, an established leading online research resource in the field of Hittitology, which until now exclusively included 2D content. The paper shows that increasing the availability of 3D scanned archaeological data through a web-based interface can provide significant scientific value while at the same time finding a trade-off between copyright induced restrictions and scientific usability. KW - cuneiform KW - 3D viewer KW - WebGL KW - Hittitology KW - 3D collation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197958 SN - 2227-9709 VL - 4 IS - 4 ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DDRS4PALS: a software for the acquisition and simulation of lifetime spectra using the DRS4 evaluation board JF - SoftwareX N2 - Lifetime techniques are applied to diverse fields of study including materials sciences, semiconductor physics, biology, molecular biophysics and photochemistry. Here we present DDRS4PALS, a software for the acquisition and simulation of lifetime spectra using the DRS4 evaluation board (Paul Scherrer Institute, Switzerland) for time resolved measurements and digitization of detector output pulses. Artifact afflicted pulses can be corrected or rejected prior to the lifetime calculation to provide the generation of high-quality lifetime spectra, which are crucial for a profound analysis, i.e. the decomposition of the true information. Moreover, the pulses can be streamed on an (external) hard drive during the measurement and subsequently downloaded in the offline mode without being connected to the hardware. This allows the generation of various lifetime spectra at different configurations from one single measurement and, hence, a meaningful comparison in terms of analyzability and quality. Parallel processing and an integrated JavaScript based language provide convenient options to accelerate and automate time consuming processes such as lifetime spectra simulations. KW - Lifetime spectroscopy KW - Positron annihilation spectroscopy KW - Simulation KW - Time resolved measurements Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202276 VL - 10 ER - TY - CHAP A1 - Davies, Richard A1 - Dewell, Nathan A1 - Harvey, Carlo T1 - A framework for interactive, autonomous and semantic dialogue generation in games T2 - Proceedings of the 1st Games Technology Summit N2 - Immersive virtual environments provide users with the opportunity to escape from the real world, but scripted dialogues can disrupt the presence within the world the user is trying to escape within. Both Non-Playable Character (NPC) to Player and NPC to NPC dialogue can be non-natural and the reliance on responding with pre-defined dialogue does not always meet the players emotional expectations or provide responses appropriate to the given context or world states. This paper investigates the application of Artificial Intelligence (AI) and Natural Language Processing to generate dynamic human-like responses within a themed virtual world. Each thematic has been analysed against humangenerated responses for the same seed and demonstrates invariance of rating across a range of model sizes, but shows an effect of theme and the size of the corpus used for fine-tuning the context for the game world. KW - natural language processing · · · KW - interactive authoring system KW - semantic understanding KW - artificial intelligence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246023 ER - TY - CHAP A1 - Sanusi, Khaleel Asyraaf Mat A1 - Klemke, Roland T1 - Immersive Multimodal Environments for Psychomotor Skills Training T2 - Proceedings of the 1st Games Technology Summit N2 - Modern immersive multimodal technologies enable the learners to completely get immersed in various learning situations in a way that feels like experiencing an authentic learning environment. These environments also allow the collection of multimodal data, which can be used with artificial intelligence to further improve the immersion and learning outcomes. The use of artificial intelligence has been widely explored for the interpretation of multimodal data collected from multiple sensors, thus giving insights to support learners’ performance by providing personalised feedback. In this paper, we present a conceptual approach for creating immersive learning environments, integrated with multi-sensor setup to help learners improve their psychomotor skills in a remote setting. KW - immersive learning technologies KW - multimodal learning KW - sensor devices KW - artificial intelligence KW - psychomotor training Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246016 ER - TY - THES A1 - Nogatz, Falco T1 - Defining and Implementing Domain-Specific Languages with Prolog T1 - Definition und Implementierung domänenspezifischer Sprachen mit Prolog N2 - The landscape of today’s programming languages is manifold. With the diversity of applications, the difficulty of adequately addressing and specifying the used programs increases. This often leads to newly designed and implemented domain-specific languages. They enable domain experts to express knowledge in their preferred format, resulting in more readable and concise programs. Due to its flexible and declarative syntax without reserved keywords, the logic programming language Prolog is particularly suitable for defining and embedding domain-specific languages. This thesis addresses the questions and challenges that arise when integrating domain-specific languages into Prolog. We compare the two approaches to define them either externally or internally, and provide assisting tools for each. The grammar of a formal language is usually defined in the extended Backus–Naur form. In this work, we handle this formalism as a domain-specific language in Prolog, and define term expansions that allow to translate it into equivalent definite clause grammars. We present the package library(dcg4pt) for SWI-Prolog, which enriches them by an additional argument to automatically process the term’s corresponding parse tree. To simplify the work with definite clause grammars, we visualise their application by a web-based tracer. The external integration of domain-specific languages requires the programmer to keep the grammar, parser, and interpreter in sync. In many cases, domain-specific languages can instead be directly embedded into Prolog by providing appropriate operator definitions. In addition, we propose syntactic extensions for Prolog to expand its expressiveness, for instance to state logic formulas with their connectives verbatim. This allows to use all tools that were originally written for Prolog, for instance code linters and editors with syntax highlighting. We present the package library(plammar), a standard-compliant parser for Prolog source code, written in Prolog. It is able to automatically infer from example sentences the required operator definitions with their classes and precedences as well as the required Prolog language extensions. As a result, we can automatically answer the question: Is it possible to model these example sentences as valid Prolog clauses, and how? We discuss and apply the two approaches to internal and external integrations for several domain-specific languages, namely the extended Backus–Naur form, GraphQL, XPath, and a controlled natural language to represent expert rules in if-then form. The created toolchain with library(dcg4pt) and library(plammar) yields new application opportunities for static Prolog source code analysis, which we also present. N2 - Die Landschaft der heutigen Programmiersprachen ist vielfältig. Mit ihren unterschiedlichen Anwendungsbereichen steigt zugleich die Schwierigkeit, die eingesetzten Programme adäquat anzusprechen und zu spezifizieren. Immer häufiger werden hierfür domänenspezifische Sprachen entworfen und implementiert. Sie ermöglichen Domänenexperten, Wissen in ihrem bevorzugten Format auszudrücken, was zu lesbareren Programmen führt. Durch ihre flexible und deklarative Syntax ohne vorbelegte Schlüsselwörter ist die logische Programmsprache Prolog besonders geeignet, um domänenspezifische Sprachen zu definieren und einzubetten. Diese Arbeit befasst sich mit den Fragen und Herausforderungen, die sich bei der Integration von domänenspezifischen Sprachen in Prolog ergeben. Wir vergleichen die zwei Ansätze, sie entweder extern oder intern zu definieren, und stellen jeweils Hilfsmittel zur Verfügung. Die Grammatik einer formalen Sprache wird häufig in der erweiterten Backus–Naur–Form definiert. Diesen Formalismus behandeln wir in dieser Arbeit als eine domänenspezifische Sprache in Prolog und definieren Termexpansionen, die es erlauben, ihn in äquivalente Definite Clause Grammars für Prolog zu übersetzen. Durch das Modul library(dcg4pt) werden sie um ein zusätzliches Argument erweitert, das den Syntaxbaum eines Terms automatisch erzeugt. Um die Arbeit mit Definite Clause Grammars zu erleichtern, visualisieren wir ihre Anwendung in einem webbasierten Tracer. Meist können domänenspezifische Sprachen jedoch auch mittels passender Operatordefinitionen direkt in Prolog eingebettet werden. Dies ermöglicht die Verwendung aller Werkzeuge, die ursprünglich für Prolog geschrieben wurden, z.B. zum Code-Linting und Syntax-Highlighting. In dieser Arbeit stellen wir den standardkonformen Prolog-Parser library(plammar) vor. Er ist in Prolog geschrieben und in der Lage, aus Beispielsätzen automatisch die erforderlichen Operatoren mit ihren Klassen und Präzedenzen abzuleiten. Um die Ausdruckskraft von Prolog noch zu erweitern, schlagen wir Ergänzungen zum ISO Standard vor. Sie erlauben es, weitere Sprachen direkt einzubinden, und werden ebenfalls von library(plammar) identifiziert. So ist es bspw. möglich, logische Formeln direkt mit den bekannten Symbolen für Konjunktion, Disjunktion, usw. als Prolog-Programme anzugeben. Beide Ansätze der internen und externen Integration werden für mehrere domänen-spezifische Sprachen diskutiert und beispielhaft für GraphQL, XPath, die erweiterte Backus–Naur–Form sowie Expertenregeln in Wenn–Dann–Form umgesetzt. Die vorgestellten Werkzeuge um library(dcg4pt) und library(plammar) ergeben zudem neue Anwendungsmöglichkeiten auch für die statische Quellcodeanalyse von Prolog-Programmen. KW - PROLOG KW - Domänenspezifische Sprache KW - logic programming KW - knowledge representation KW - definite clause grammars Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-301872 ER - TY - RPRT A1 - Loh, Frank A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - LoRaWAN Network Planning in Smart Environments: Towards Reliability, Scalability, and Cost Reduction T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - The goal in this work is to present a guidance for LoRaWAN planning to improve overall reliability for message transmissions and scalability. At the end, the cost component is discussed. Therefore, a five step approach is presented that helps to plan a LoRaWAN deployment step by step: Based on the device locations, an initial gateway placement is suggested followed by in-depth frequency and channel access planning. After an initial planning phase, updates for channel access and the initial gateway planning is suggested that should also be done periodically during network operation. Since current gateway placement approaches are only studied with random channel access, there is a lot of potential in the cell planning phase. Furthermore, the performance of different channel access approaches is highly related on network load, and thus cell size and sensor density. Last, the influence of different cell planning ideas on expected costs are discussed. KW - Datennetz KW - LoRaWan Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280829 ER - TY - JOUR A1 - Loh, Frank A1 - Mehling, Noah A1 - Hoßfeld, Tobias T1 - Towards LoRaWAN without data loss: studying the performance of different channel access approaches JF - Sensors N2 - The Long Range Wide Area Network (LoRaWAN) is one of the fastest growing Internet of Things (IoT) access protocols. It operates in the license free 868 MHz band and gives everyone the possibility to create their own small sensor networks. The drawback of this technology is often unscheduled or random channel access, which leads to message collisions and potential data loss. For that reason, recent literature studies alternative approaches for LoRaWAN channel access. In this work, state-of-the-art random channel access is compared with alternative approaches from the literature by means of collision probability. Furthermore, a time scheduled channel access methodology is presented to completely avoid collisions in LoRaWAN. For this approach, an exhaustive simulation study was conducted and the performance was evaluated with random access cross-traffic. In a general theoretical analysis the limits of the time scheduled approach are discussed to comply with duty cycle regulations in LoRaWAN. KW - LoRaWAN KW - IoT KW - channel management KW - scheduling KW - collision Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-302418 SN - 1424-8220 VL - 22 IS - 2 ER - TY - JOUR A1 - Kern, Florian A1 - Kullmann, Peter A1 - Ganal, Elisabeth A1 - Korwisi, Kristof A1 - Stingl, René A1 - Niebling, Florian A1 - Latoschik, Marc Erich T1 - Off-The-Shelf Stylus: Using XR Devices for Handwriting and Sketching on Physically Aligned Virtual Surfaces JF - Frontiers in Virtual Reality N2 - This article introduces the Off-The-Shelf Stylus (OTSS), a framework for 2D interaction (in 3D) as well as for handwriting and sketching with digital pen, ink, and paper on physically aligned virtual surfaces in Virtual, Augmented, and Mixed Reality (VR, AR, MR: XR for short). OTSS supports self-made XR styluses based on consumer-grade six-degrees-of-freedom XR controllers and commercially available styluses. The framework provides separate modules for three basic but vital features: 1) The stylus module provides stylus construction and calibration features. 2) The surface module provides surface calibration and visual feedback features for virtual-physical 2D surface alignment using our so-called 3ViSuAl procedure, and surface interaction features. 3) The evaluation suite provides a comprehensive test bed combining technical measurements for precision, accuracy, and latency with extensive usability evaluations including handwriting and sketching tasks based on established visuomotor, graphomotor, and handwriting research. The framework’s development is accompanied by an extensive open source reference implementation targeting the Unity game engine using an Oculus Rift S headset and Oculus Touch controllers. The development compares three low-cost and low-tech options to equip controllers with a tip and includes a web browser-based surface providing support for interacting, handwriting, and sketching. The evaluation of the reference implementation based on the OTSS framework identified an average stylus precision of 0.98 mm (SD = 0.54 mm) and an average surface accuracy of 0.60 mm (SD = 0.32 mm) in a seated VR environment. The time for displaying the stylus movement as digital ink on the web browser surface in VR was 79.40 ms on average (SD = 23.26 ms), including the physical controller’s motion-to-photon latency visualized by its virtual representation (M = 42.57 ms, SD = 15.70 ms). The usability evaluation (N = 10) revealed a low task load, high usability, and high user experience. Participants successfully reproduced given shapes and created legible handwriting, indicating that the OTSS and it’s reference implementation is ready for everyday use. We provide source code access to our implementation, including stylus and surface calibration and surface interaction features, making it easy to reuse, extend, adapt and/or replicate previous results (https://go.uniwue.de/hci-otss). KW - virtual reality KW - augmented reality KW - handwriting KW - sketching KW - stylus KW - user interaction KW - usability evaluation KW - passive haptic feedback Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260219 VL - 2 ER - TY - JOUR A1 - Bartl, Andrea A1 - Wenninger, Stephan A1 - Wolf, Erik A1 - Botsch, Mario A1 - Latoschik, Marc Erich T1 - Affordable but not cheap: a case study of the effects of two 3D-reconstruction methods of virtual humans JF - Frontiers in Virtual Reality N2 - Realistic and lifelike 3D-reconstruction of virtual humans has various exciting and important use cases. Our and others’ appearances have notable effects on ourselves and our interaction partners in virtual environments, e.g., on acceptance, preference, trust, believability, behavior (the Proteus effect), and more. Today, multiple approaches for the 3D-reconstruction of virtual humans exist. They significantly vary in terms of the degree of achievable realism, the technical complexities, and finally, the overall reconstruction costs involved. This article compares two 3D-reconstruction approaches with very different hardware requirements. The high-cost solution uses a typical complex and elaborated camera rig consisting of 94 digital single-lens reflex (DSLR) cameras. The recently developed low-cost solution uses a smartphone camera to create videos that capture multiple views of a person. Both methods use photogrammetric reconstruction and template fitting with the same template model and differ in their adaptation to the method-specific input material. Each method generates high-quality virtual humans ready to be processed, animated, and rendered by standard XR simulation and game engines such as Unreal or Unity. We compare the results of the two 3D-reconstruction methods in an immersive virtual environment against each other in a user study. Our results indicate that the virtual humans from the low-cost approach are perceived similarly to those from the high-cost approach regarding the perceived similarity to the original, human-likeness, beauty, and uncanniness, despite significant differences in the objectively measured quality. The perceived feeling of change of the own body was higher for the low-cost virtual humans. Quality differences were perceived more strongly for one’s own body than for other virtual humans. KW - virtual humans KW - 3D-reconstruction methods KW - avatars KW - agents KW - user study Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260492 VL - 2 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Latoschik, Marc Erich T1 - eXtended Artificial Intelligence: New Prospects of Human-AI Interaction Research JF - Frontiers in Virtual Reality N2 - Artificial Intelligence (AI) covers a broad spectrum of computational problems and use cases. Many of those implicate profound and sometimes intricate questions of how humans interact or should interact with AIs. Moreover, many users or future users do have abstract ideas of what AI is, significantly depending on the specific embodiment of AI applications. Human-centered-design approaches would suggest evaluating the impact of different embodiments on human perception of and interaction with AI. An approach that is difficult to realize due to the sheer complexity of application fields and embodiments in reality. However, here XR opens new possibilities to research human-AI interactions. The article’s contribution is twofold: First, it provides a theoretical treatment and model of human-AI interaction based on an XR-AI continuum as a framework for and a perspective of different approaches of XR-AI combinations. It motivates XR-AI combinations as a method to learn about the effects of prospective human-AI interfaces and shows why the combination of XR and AI fruitfully contributes to a valid and systematic investigation of human-AI interactions and interfaces. Second, the article provides two exemplary experiments investigating the aforementioned approach for two distinct AI-systems. The first experiment reveals an interesting gender effect in human-robot interaction, while the second experiment reveals an Eliza effect of a recommender system. Here the article introduces two paradigmatic implementations of the proposed XR testbed for human-AI interactions and interfaces and shows how a valid and systematic investigation can be conducted. In sum, the article opens new perspectives on how XR benefits human-centered AI design and development. KW - human-artificial intelligence interface KW - human-artificial intelligence interaction KW - XR-artificial intelligence continuum KW - XR-artificial intelligence combination KW - research methods KW - human-centered, human-robot KW - recommender system Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260296 VL - 2 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Carolus, Astrid T1 - Development of an Instrument to Measure Conceptualizations and Competencies About Conversational Agents on the Example of Smart Speakers JF - Frontiers in Computer Science N2 - The concept of digital literacy has been introduced as a new cultural technique, which is regarded as essential for successful participation in a (future) digitized world. Regarding the increasing importance of AI, literacy concepts need to be extended to account for AI-related specifics. The easy handling of the systems results in increased usage, contrasting limited conceptualizations (e.g., imagination of future importance) and competencies (e.g., knowledge about functional principles). In reference to voice-based conversational agents as a concrete application of AI, the present paper aims for the development of a measurement to assess the conceptualizations and competencies about conversational agents. In a first step, a theoretical framework of “AI literacy” is transferred to the context of conversational agent literacy. Second, the “conversational agent literacy scale” (short CALS) is developed, constituting the first attempt to measure interindividual differences in the “(il) literate” usage of conversational agents. 29 items were derived, of which 170 participants answered. An explanatory factor analysis identified five factors leading to five subscales to assess CAL: storage and transfer of the smart speaker’s data input; smart speaker’s functional principles; smart speaker’s intelligent functions, learning abilities; smart speaker’s reach and potential; smart speaker’s technological (surrounding) infrastructure. Preliminary insights into construct validity and reliability of CALS showed satisfying results. Third, using the newly developed instrument, a student sample’s CAL was assessed, revealing intermediated values. Remarkably, owning a smart speaker did not lead to higher CAL scores, confirming our basic assumption that usage of systems does not guarantee enlightened conceptualizations and competencies. In sum, the paper contributes to the first insights into the operationalization and understanding of CAL as a specific subdomain of AI-related competencies. KW - artificial intelligence literacy KW - artificial intelligence education KW - voice-based artificial intelligence KW - conversational agents KW - measurement Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260198 VL - 3 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Reitelbach, Clemens A1 - Carolus, Astrid T1 - The Trustworthiness of Voice Assistants in the Context of Healthcare Investigating the Effect of Perceived Expertise on the Trustworthiness of Voice Assistants, Providers, Data Receivers, and Automatic Speech Recognition JF - Frontiers in Computer Science N2 - As an emerging market for voice assistants (VA), the healthcare sector imposes increasing requirements on the users’ trust in the technological system. To encourage patients to reveal sensitive data requires patients to trust in the technological counterpart. In an experimental laboratory study, participants were presented a VA, which was introduced as either a “specialist” or a “generalist” tool for sexual health. In both conditions, the VA asked the exact same health-related questions. Afterwards, participants assessed the trustworthiness of the tool and further source layers (provider, platform provider, automatic speech recognition in general, data receiver) and reported individual characteristics (disposition to trust and disclose sexual information). Results revealed that perceiving the VA as a specialist resulted in higher trustworthiness of the VA and of the provider, the platform provider and automatic speech recognition in general. Furthermore, the provider’s trustworthiness affected the perceived trustworthiness of the VA. Presenting both a theoretical line of reasoning and empirical data, the study points out the importance of the users’ perspective on the assistant. In sum, this paper argues for further analyses of trustworthiness in voice-based systems and its effects on the usage behavior as well as the impact on responsible design of future technology. KW - voice assistant KW - trustworthiness KW - trust KW - anamnesis tool KW - expertise framing (Min5-Max 8) Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260209 VL - 3 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Komma, Philipp A1 - Vogt, Stephanie A1 - Latoschik, Marc E. T1 - Spatial Presence in Mixed Realities – Considerations About the Concept, Measures, Design, and Experiments JF - Frontiers in Virtual Reality N2 - Plenty of theories, models, measures, and investigations target the understanding of virtual presence, i.e., the sense of presence in immersive Virtual Reality (VR). Other varieties of the so-called eXtended Realities (XR), e.g., Augmented and Mixed Reality (AR and MR) incorporate immersive features to a lesser degree and continuously combine spatial cues from the real physical space and the simulated virtual space. This blurred separation questions the applicability of the accumulated knowledge about the similarities of virtual presence and presence occurring in other varieties of XR, and corresponding outcomes. The present work bridges this gap by analyzing the construct of presence in mixed realities (MR). To achieve this, the following presents (1) a short review of definitions, dimensions, and measurements of presence in VR, and (2) the state of the art views on MR. Additionally, we (3) derived a working definition of MR, extending the Milgram continuum. This definition is based on entities reaching from real to virtual manifestations at one time point. Entities possess different degrees of referential power, determining the selection of the frame of reference. Furthermore, we (4) identified three research desiderata, including research questions about the frame of reference, the corresponding dimension of transportation, and the dimension of realism in MR. Mainly the relationship between the main aspects of virtual presence of immersive VR, i.e., the place-illusion, and the plausibility-illusion, and of the referential power of MR entities are discussed regarding the concept, measures, and design of presence in MR. Finally, (5) we suggested an experimental setup to reveal the research heuristic behind experiments investigating presence in MR. The present work contributes to the theories and the meaning of and approaches to simulate and measure presence in MR. We hypothesize that research about essential underlying factors determining user experience (UX) in MR simulations and experiences is still in its infancy and hopes this article provides an encouraging starting point to tackle related questions. KW - mixed reality KW - virtual-reality-continuum KW - spatial presence KW - place-illusion KW - plausibility-illusion KW - transportation KW - realism Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260328 VL - 2 ER - TY - JOUR A1 - Glémarec, Yann A1 - Lugrin, Jean-Luc A1 - Bosser, Anne-Gwenn A1 - Collins Jackson, Aryana A1 - Buche, Cédric A1 - Latoschik, Marc Erich T1 - Indifferent or Enthusiastic? Virtual Audiences Animation and Perception in Virtual Reality JF - Frontiers in Virtual Reality N2 - In this paper, we present a virtual audience simulation system for Virtual Reality (VR). The system implements an audience perception model controlling the nonverbal behaviors of virtual spectators, such as facial expressions or postures. Groups of virtual spectators are animated by a set of nonverbal behavior rules representing a particular audience attitude (e.g., indifferent or enthusiastic). Each rule specifies a nonverbal behavior category: posture, head movement, facial expression and gaze direction as well as three parameters: type, frequency and proportion. In a first user-study, we asked participants to pretend to be a speaker in VR and then create sets of nonverbal behaviour parameters to simulate different attitudes. Participants manipulated the nonverbal behaviours of single virtual spectator to match a specific levels of engagement and opinion toward them. In a second user-study, we used these parameters to design different types of virtual audiences with our nonverbal behavior rules and evaluated their perceptions. Our results demonstrate our system’s ability to create virtual audiences with three types of different perceived attitudes: indifferent, critical, enthusiastic. The analysis of the results also lead to a set of recommendations and guidelines regarding attitudes and expressions for future design of audiences for VR therapy and training applications. KW - virtual reality KW - perception KW - nonverbal behavior KW - interaction KW - virtual agent KW - virtual audience Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259328 VL - 2 ER - TY - JOUR A1 - Hein, Rebecca M. A1 - Wienrich, Carolin A1 - Latoschik, Marc E. T1 - A systematic review of foreign language learning with immersive technologies (2001-2020) JF - AIMS Electronics and Electrical Engineering N2 - This study provides a systematic literature review of research (2001–2020) in the field of teaching and learning a foreign language and intercultural learning using immersive technologies. Based on 2507 sources, 54 articles were selected according to a predefined selection criteria. The review is aimed at providing information about which immersive interventions are being used for foreign language learning and teaching and where potential research gaps exist. The papers were analyzed and coded according to the following categories: (1) investigation form and education level, (2) degree of immersion, and technology used, (3) predictors, and (4) criterions. The review identified key research findings relating the use of immersive technologies for learning and teaching a foreign language and intercultural learning at cognitive, affective, and conative levels. The findings revealed research gaps in the area of teachers as a target group, and virtual reality (VR) as a fully immersive intervention form. Furthermore, the studies reviewed rarely examined behavior, and implicit measurements related to inter- and trans-cultural learning and teaching. Inter- and transcultural learning and teaching especially is an underrepresented investigation subject. Finally, concrete suggestions for future research are given. The systematic review contributes to the challenge of interdisciplinary cooperation between pedagogy, foreign language didactics, and Human-Computer Interaction to achieve innovative teaching-learning formats and a successful digital transformation. KW - foreign language learning and teaching KW - intercultural learning and teaching KW - immersive technologies KW - education KW - human-computer interaction KW - systematic literature review Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268811 VL - 5 IS - 2 ER - TY - RPRT A1 - Sertbas Bülbül, Nurefsan A1 - Ergenc, Doganalp A1 - Fischer, Mathias T1 - Evaluating Dynamic Path Reconfiguration for Time Sensitive Networks T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - In time-sensitive networks (TSN) based on 802.1Qbv, i.e., the time-aware Shaper (TAS) protocol, precise transmission schedules and, paths are used to ensure end-to-end deterministic communication. Such resource reservations for data flows are usually established at the startup time of an application and remain untouched until the flow ends. There is no way to migrate existing flows easily to alternative paths without inducing additional delay or wasting resources. Therefore, some of the new flows cannot be embedded due to capacity limitations on certain links which leads to sub-optimal flow assignment. As future networks will need to support a large number of lowlatency flows, accommodating new flows at runtime and adapting existing flows accordingly becomes a challenging problem. In this extended abstract we summarize a previously published paper of us [1]. We combine software-defined networking (SDN), which provides better control of network flows, with TSN to be able to seamlessly migrate time-sensitive flows. For that, we formulate an optimization problem and propose different dynamic path configuration strategies under deterministic communication requirements. Our simulation results indicate that regularly reconfiguring the flow assignments can improve the latency of time-sensitive flows and can increase the number of flows embedded in the network around 4% in worst-case scenarios while still satisfying individual flow deadlines. KW - Datennetz KW - SDN KW - dynamic flow migration KW - reconfiguration KW - TSN KW - path computation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280743 ER - TY - RPRT A1 - Le, Duy Thanh A1 - Großmann, Marcel A1 - Krieger, Udo R. T1 - Cloudless Resource Monitoring in a Fog Computing System Enabled by an SDN/NFV Infrastructure T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Today’s advanced Internet-of-Things applications raise technical challenges on cloud, edge, and fog computing. The design of an efficient, virtualized, context-aware, self-configuring orchestration system of a fog computing system constitutes a major development effort within this very innovative area of research. In this paper we describe the architecture and relevant implementation aspects of a cloudless resource monitoring system interworking with an SDN/NFV infrastructure. It realizes the basic monitoring component of the fundamental MAPE-K principles employed in autonomic computing. Here we present the hierarchical layering and functionality within the underlying fog nodes to generate a working prototype of an intelligent, self-managed orchestrator for advanced IoT applications and services. The latter system has the capability to monitor automatically various performance aspects of the resource allocation among multiple hosts of a fog computing system interconnected by SDN. KW - Datennetz KW - fog computing KW - SDN/NVF KW - container virtualization KW - autonomic orchestration KW - docker Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280723 ER - TY - RPRT A1 - Höweler, Malte A1 - Xiang, Zuo A1 - Höpfner, Franz A1 - Nguyen, Giang T. A1 - Fitzek, Frank H. P. T1 - Towards Stateless Core Networks: Measuring State Access Patterns T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Future mobile communication networks, such as 5G and beyond, can benefit from Virtualized Network Functions (VNFs) when deployed on cloud infrastructures to achieve elasticity and scalability. However, new challenges arise as to managing states of Network Functions (NFs). Especially control plane VNFs, which are mainly found in cellular core networks like the 5G Core (5GC), received little attention since the shift towards virtualizing NFs. Most existing solutions for these core networks are often complex, intrusive, and are seldom compliant with the standard. With the emergence of 5G campus networks, UEs will be mainly machine-type devices. These devices communicate more deterministically, bringing new opportunities for elaborated state management. This work presents an emulation environment to perform rigorous measurements on state access patterns. The emulation comes with a fully parameterized Markov model for the UE to examine a wide variety of different devices. These measurements can then be used as a solid base for designing an efficient, simple, and standard conform state management solution that brings us further towards stateless core networks. KW - Datennetz KW - 5GC KW - VNF KW - SBA KW - measurements KW - MTC Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280770 ER - TY - RPRT A1 - Grigorjew, Alexej A1 - Diederich, Philip A1 - Hoßfeld, Tobias A1 - Kellerer, Wolfgang T1 - Affordable Measurement Setups for Networking Device Latency with Sub-Microsecond Accuracy T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This document presents a networking latency measurement setup that focuses on affordability and universal applicability, and can provide sub-microsecond accuracy. It explains the prerequisites, hardware choices, and considerations to respect during measurement. In addition, it discusses the necessity for exhaustive latency measurements when dealing with high availability and low latency requirements. Preliminary results show that the accuracy is within ±0.02 μs when used with the Intel I350-T2 network adapter. KW - Datennetz KW - latency Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280751 ER - TY - RPRT A1 - Gallenmüller, Sebastian A1 - Scholz, Dominik A1 - Stubbe, Henning A1 - Hauser, Eric A1 - Carle, Georg T1 - Reproducible by Design: Network Experiments with pos T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - In scientific research, the independent reproduction of experiments is the source of trust. Detailed documentation is required to enable experiment reproduction. Reproducibility awards were created to honor the increased documentation effort. In this work, we propose a novel approach toward reproducible research—a structured experimental workflow that allows the creation of reproducible experiments without requiring additional efforts of the researcher. Moreover, we present our own testbed and toolchain, namely, plain orchestrating service (pos), which enables the creation of such experimental workflows. The experiment is documented by our proposed, fully scripted experiment structure. In addition, pos provides scripts enabling the automation of the bundling and release of all experimental artifacts. We provide an interactive environment where pos experiments can be executed and reproduced, available at https://gallenmu.github.io/single-server-experiment. KW - Datennetz KW - Reproducibility KW - Testbed KW - Network Experiments KW - plain orchestrating service KW - pos Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280834 ER - TY - RPRT A1 - Odhah, Najib A1 - Grass, Eckhard A1 - Kraemer, Rolf T1 - Effective Rate of URLLC with Short Block-Length Information Theory T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Shannon channel capacity estimation, based on large packet length is used in traditional Radio Resource Management (RRM) optimization. This is good for the normal transmission of data in a wired or wireless system. For industrial automation and control, rather short packages are used due to the short-latency requirements. Using Shannon’s formula leads in this case to inaccurate RRM solutions, thus another formula should be used to optimize radio resources in short block-length packet transmission, which is the basic of Ultra-Reliable Low-Latency Communications (URLLCs). The stringent requirement of delay Quality of Service (QoS) for URLLCs requires a link-level channel model rather than a physical level channel model. After finding the basic and accurate formula of the achievable rate of short block-length packet transmission, the RRM optimization problem can be accurately formulated and solved under the new constraints of URLLCs. In this short paper, the current mathematical models, which are used in formulating the effective transmission rate of URLLCs, will be briefly explained. Then, using this rate in RRM for URLLC will be discussed. KW - Datennetz KW - URLLC KW - RRM KW - delay QoS exponent KW - decoding error rate KW - delay bound violation probability KW - short block-length KW - effective Bandwidth Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280859 ER - TY - RPRT A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - DBM: Decentralized Burst Mitigation for Self-Organizing LoRa Deployments T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This work proposes a novel approach to disperse dense transmission intervals and reduce bursty traffic patterns without the need for centralized control. Furthermore, by keeping the mechanism as close to the Long Range Wide Area Network (LoRaWAN) standard as possible the suggested mechanism can be deployed within existing networks and can even be co-deployed with other devices. KW - Datennetz KW - LoRa Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280809 ER - TY - JOUR A1 - Dumic, Emil A1 - Bjelopera, Anamaria A1 - Nüchter, Andreas T1 - Dynamic point cloud compression based on projections, surface reconstruction and video compression JF - Sensors N2 - In this paper we will present a new dynamic point cloud compression based on different projection types and bit depth, combined with the surface reconstruction algorithm and video compression for obtained geometry and texture maps. Texture maps have been compressed after creating Voronoi diagrams. Used video compression is specific for geometry (FFV1) and texture (H.265/HEVC). Decompressed point clouds are reconstructed using a Poisson surface reconstruction algorithm. Comparison with the original point clouds was performed using point-to-point and point-to-plane measures. Comprehensive experiments show better performance for some projection maps: cylindrical, Miller and Mercator projections. KW - 3DTK toolkit KW - map projections KW - point cloud compression KW - point-to-point measure KW - point-to-plane measure KW - Poisson surface reconstruction KW - octree Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252231 SN - 1424-8220 VL - 22 IS - 1 ER - TY - JOUR A1 - Madeira, Octavia A1 - Gromer, Daniel A1 - Latoschik, Marc Erich A1 - Pauli, Paul T1 - Effects of Acrophobic Fear and Trait Anxiety on Human Behavior in a Virtual Elevated Plus-Maze JF - Frontiers in Virtual Reality N2 - The Elevated Plus-Maze (EPM) is a well-established apparatus to measure anxiety in rodents, i.e., animals exhibiting an increased relative time spent in the closed vs. the open arms are considered anxious. To examine whether such anxiety-modulated behaviors are conserved in humans, we re-translated this paradigm to a human setting using virtual reality in a Cave Automatic Virtual Environment (CAVE) system. In two studies, we examined whether the EPM exploration behavior of humans is modulated by their trait anxiety and also assessed the individuals’ levels of acrophobia (fear of height), claustrophobia (fear of confined spaces), sensation seeking, and the reported anxiety when on the maze. First, we constructed an exact virtual copy of the animal EPM adjusted to human proportions. In analogy to animal EPM studies, participants (N = 30) freely explored the EPM for 5 min. In the second study (N = 61), we redesigned the EPM to make it more human-adapted and to differentiate influences of trait anxiety and acrophobia by introducing various floor textures and lower walls of closed arms to the height of standard handrails. In the first experiment, hierarchical regression analyses of exploration behavior revealed the expected association between open arm avoidance and Trait Anxiety, an even stronger association with acrophobic fear. In the second study, results revealed that acrophobia was associated with avoidance of open arms with mesh-floor texture, whereas for trait anxiety, claustrophobia, and sensation seeking, no effect was detected. Also, subjects’ fear rating was moderated by all psychometrics but trait anxiety. In sum, both studies consistently indicate that humans show no general open arm avoidance analogous to rodents and that human EPM behavior is modulated strongest by acrophobic fear, whereas trait anxiety plays a subordinate role. Thus, we conclude that the criteria for cross-species validity are met insufficiently in this case. Despite the exploratory nature, our studies provide in-depth insights into human exploration behavior on the virtual EPM. KW - elevated plus-maze KW - EPM KW - anxiety KW - virtual reality KW - translational neuroscience KW - acrophobia KW - trait anxiety Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258709 VL - 2 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Döllinger, Nina A1 - Hein, Rebecca T1 - Behavioral Framework of Immersive Technologies (BehaveFIT): How and why virtual reality can support behavioral change processes JF - Frontiers in Virtual Reality N2 - The design and evaluation of assisting technologies to support behavior change processes have become an essential topic within the field of human-computer interaction research in general and the field of immersive intervention technologies in particular. The mechanisms and success of behavior change techniques and interventions are broadly investigated in the field of psychology. However, it is not always easy to adapt these psychological findings to the context of immersive technologies. The lack of theoretical foundation also leads to a lack of explanation as to why and how immersive interventions support behavior change processes. The Behavioral Framework for immersive Technologies (BehaveFIT) addresses this lack by 1) presenting an intelligible categorization and condensation of psychological barriers and immersive features, by 2) suggesting a mapping that shows why and how immersive technologies can help to overcome barriers and finally by 3) proposing a generic prediction path that enables a structured, theory-based approach to the development and evaluation of immersive interventions. These three steps explain how BehaveFIT can be used, and include guiding questions for each step. Further, two use cases illustrate the usage of BehaveFIT. Thus, the present paper contributes to guidance for immersive intervention design and evaluation, showing that immersive interventions support behavior change processes and explain and predict 'why' and 'how' immersive interventions can bridge the intention-behavior-gap. KW - immersive technologies KW - behavior change KW - intervention design KW - intervention evaluation KW - framework KW - virtual reality KW - intention-behavior-gap KW - human-computer interaction Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258796 VL - 2 ER - TY - JOUR A1 - Kraft, Robin A1 - Reichert, Manfred A1 - Pryss, Rüdiger T1 - Towards the interpretation of sound measurements from smartphones collected with mobile crowdsensing in the healthcare domain: an experiment with Android devices JF - Sensors N2 - The ubiquity of mobile devices fosters the combined use of ecological momentary assessments (EMA) and mobile crowdsensing (MCS) in the field of healthcare. This combination not only allows researchers to collect ecologically valid data, but also to use smartphone sensors to capture the context in which these data are collected. The TrackYourTinnitus (TYT) platform uses EMA to track users' individual subjective tinnitus perception and MCS to capture an objective environmental sound level while the EMA questionnaire is filled in. However, the sound level data cannot be used directly among the different smartphones used by TYT users, since uncalibrated raw values are stored. This work describes an approach towards making these values comparable. In the described setting, the evaluation of sensor measurements from different smartphone users becomes increasingly prevalent. Therefore, the shown approach can be also considered as a more general solution as it not only shows how it helped to interpret TYT sound level data, but may also stimulate other researchers, especially those who need to interpret sensor data in a similar setting. Altogether, the approach will show that measuring sound levels with mobile devices is possible in healthcare scenarios, but there are many challenges to ensuring that the measured values are interpretable. KW - mHealth KW - crowdsensing KW - tinnitus KW - noise measurement KW - environmental sound Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252246 SN - 1424-8220 VL - 22 IS - 1 ER - TY - JOUR A1 - Ankenbrand, Markus J. A1 - Shainberg, Liliia A1 - Hock, Michael A1 - Lohr, David A1 - Schreiber, Laura M. T1 - Sensitivity analysis for interpretation of machine learning based segmentation models in cardiac MRI JF - BMC Medical Imaging N2 - Background Image segmentation is a common task in medical imaging e.g., for volumetry analysis in cardiac MRI. Artificial neural networks are used to automate this task with performance similar to manual operators. However, this performance is only achieved in the narrow tasks networks are trained on. Performance drops dramatically when data characteristics differ from the training set properties. Moreover, neural networks are commonly considered black boxes, because it is hard to understand how they make decisions and why they fail. Therefore, it is also hard to predict whether they will generalize and work well with new data. Here we present a generic method for segmentation model interpretation. Sensitivity analysis is an approach where model input is modified in a controlled manner and the effect of these modifications on the model output is evaluated. This method yields insights into the sensitivity of the model to these alterations and therefore to the importance of certain features on segmentation performance. Results We present an open-source Python library (misas), that facilitates the use of sensitivity analysis with arbitrary data and models. We show that this method is a suitable approach to answer practical questions regarding use and functionality of segmentation models. We demonstrate this in two case studies on cardiac magnetic resonance imaging. The first case study explores the suitability of a published network for use on a public dataset the network has not been trained on. The second case study demonstrates how sensitivity analysis can be used to evaluate the robustness of a newly trained model. Conclusions Sensitivity analysis is a useful tool for deep learning developers as well as users such as clinicians. It extends their toolbox, enabling and improving interpretability of segmentation models. Enhancing our understanding of neural networks through sensitivity analysis also assists in decision making. Although demonstrated only on cardiac magnetic resonance images this approach and software are much more broadly applicable. KW - deep learning KW - neural networks KW - cardiac magnetic resonance KW - sensitivity analysis KW - transformations KW - augmentation KW - segmentation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259169 VL - 21 IS - 1 ER - TY - JOUR A1 - Steinhaeusser, Sophia C. A1 - Oberdörfer, Sebastian A1 - von Mammen, Sebastian A1 - Latoschik, Marc Erich A1 - Lugrin, Birgit T1 - Joyful adventures and frightening places – designing emotion-inducing virtual environments JF - Frontiers in Virtual Reality N2 - Virtual environments (VEs) can evoke and support emotions, as experienced when playing emotionally arousing games. We theoretically approach the design of fear and joy evoking VEs based on a literature review of empirical studies on virtual and real environments as well as video games’ reviews and content analyses. We define the design space and identify central design elements that evoke specific positive and negative emotions. Based on that, we derive and present guidelines for emotion-inducing VE design with respect to design themes, colors and textures, and lighting configurations. To validate our guidelines in two user studies, we 1) expose participants to 360° videos of VEs designed following the individual guidelines and 2) immerse them in a neutral, positive and negative emotion-inducing VEs combining all respective guidelines in Virtual Reality. The results support our theoretically derived guidelines by revealing significant differences in terms of fear and joy induction. KW - virtual reality KW - virtual environments KW - immersion KW - emotions KW - design Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-284831 SN - 2673-4192 VL - 3 ER - TY - JOUR A1 - Prantl, Thomas A1 - Zeck, Timo A1 - Bauer, Andre A1 - Ten, Peter A1 - Prantl, Dominik A1 - Yahya, Ala Eddine Ben A1 - Ifflaender, Lukas A1 - Dmitrienko, Alexandra A1 - Krupitzer, Christian A1 - Kounev, Samuel T1 - A Survey on Secure Group Communication Schemes With Focus on IoT Communication JF - IEEE Access N2 - A key feature for Internet of Things (IoT) is to control what content is available to each user. To handle this access management, encryption schemes can be used. Due to the diverse usage of encryption schemes, there are various realizations of 1-to-1, 1-to-n, and n-to-n schemes in the literature. This multitude of encryption methods with a wide variety of properties presents developers with the challenge of selecting the optimal method for a particular use case, which is further complicated by the fact that there is no overview of existing encryption schemes. To fill this gap, we envision a cryptography encyclopedia providing such an overview of existing encryption schemes. In this survey paper, we take a first step towards such an encyclopedia by creating a sub-encyclopedia for secure group communication (SGC) schemes, which belong to the n-to-n category. We extensively surveyed the state-of-the-art and classified 47 different schemes. More precisely, we provide (i) a comprehensive overview of the relevant security features, (ii) a set of relevant performance metrics, (iii) a classification for secure group communication schemes, and (iv) workflow descriptions of the 47 schemes. Moreover, we perform a detailed performance and security evaluation of the 47 secure group communication schemes. Based on this evaluation, we create a guideline for the selection of secure group communication schemes. KW - Internet of Things KW - encryption KW - secure group communication Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300257 VL - 10 SP - 99944 EP - 99962 ER - TY - JOUR A1 - Oberdörfer, Sebastian A1 - Heidrich, David A1 - Birnstiel, Sandra A1 - Latoschik, Marc Erich T1 - Enchanted by Your Surrounding? Measuring the Effects of Immersion and Design of Virtual Environments on Decision-Making JF - Frontiers in Virtual Reality N2 - Impaired decision-making leads to the inability to distinguish between advantageous and disadvantageous choices. The impairment of a person’s decision-making is a common goal of gambling games. Given the recent trend of gambling using immersive Virtual Reality it is crucial to investigate the effects of both immersion and the virtual environment (VE) on decision-making. In a novel user study, we measured decision-making using three virtual versions of the Iowa Gambling Task (IGT). The versions differed with regard to the degree of immersion and design of the virtual environment. While emotions affect decision-making, we further measured the positive and negative affect of participants. A higher visual angle on a stimulus leads to an increased emotional response. Thus, we kept the visual angle on the Iowa Gambling Task the same between our conditions. Our results revealed no significant impact of immersion or the VE on the IGT. We further found no significant difference between the conditions with regard to positive and negative affect. This suggests that neither the medium used nor the design of the VE causes an impairment of decision-making. However, in combination with a recent study, we provide first evidence that a higher visual angle on the IGT leads to an effect of impairment. KW - virtual reality KW - virtual environments KW - immersion KW - decision-making KW - iowa gambling task Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260101 VL - 2 ER - TY - RPRT A1 - Savvidis, Dimitrios A1 - Roth, Robert A1 - Tutsch, Dietmar T1 - Static Evaluation of a Wheel-Topology for an SDN-based Network Usecase T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - The increased occurrence of Software-Defined-Networking (SDN) not only improves the dynamics and maintenance of network architectures, but also opens up new use cases and application possibilities. Based on these observations, we propose a new network topology consisting of a star and a ring topology. This hybrid topology will be called wheel topology in this paper. We have considered the static characteristics of the wheel topology and compare them with known other topologies. KW - Datennetz KW - SDN KW - topology KW - wheel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280715 ER - TY - JOUR A1 - Loh, Frank A1 - Wamser, Florian A1 - Poignée, Fabian A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - YouTube Dataset on Mobile Streaming for Internet Traffic Modeling and Streaming Analysis JF - Scientific Data N2 - Around 4.9 billion Internet users worldwide watch billions of hours of online video every day. As a result, streaming is by far the predominant type of traffic in communication networks. According to Google statistics, three out of five video views come from mobile devices. Thus, in view of the continuous technological advances in end devices and increasing mobile use, datasets for mobile streaming are indispensable in research but only sparsely dealt with in literature so far. With this public dataset, we provide 1,081 hours of time-synchronous video measurements at network, transport, and application layer with the native YouTube streaming client on mobile devices. The dataset includes 80 network scenarios with 171 different individual bandwidth settings measured in 5,181 runs with limited bandwidth, 1,939 runs with emulated 3 G/4 G traces, and 4,022 runs with pre-defined bandwidth changes. This corresponds to 332 GB video payload. We present the most relevant quality indicators for scientific use, i.e., initial playback delay, streaming video quality, adaptive video quality changes, video rebuffering events, and streaming phases. KW - internet traffic KW - mobile streaming KW - YouTube Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300240 VL - 9 IS - 1 ER - TY - CHAP A1 - Abendschein, Robin A1 - Desai, Shital A1 - Astell, Arlene J. T1 - Towards Accessibility Guidelines for the Metaverse : A Synthesis of Recommendations for People Living With Dementia T2 - Conference on Human Factors in Computing Systems (CHI’23) : Workshop "Towards an Inclusive and Accessible Metaverse" N2 - Given the growing interest of corporate stakeholders in Metaverse applications, there is a need to understand accessibility of these technologies for marginalized populations such as people living with dementia to ensure inclusive design of Metaverse applications. We assessed the accessibility of extended reality technology for people living with mild cognitive impairment and dementia to develop accessibility guidelines for these technologies. We used four strategies to synthesize evidence for barriers and facilitators of accessibility: (1) Findings from a non-systematic literature review, (2) guidelines from well-researched technology, (3) exploration of selected mixed reality technologies, and (4) observations from four sessions and video data of people living with dementia using mixed reality technologies. We utilized template analysis to develop codes and themes towards accessibility guidelines. Future work can validate our preliminary findings by applying them on video recordings or testing them in experiments. KW - CHI Conference KW - Accessibility KW - Metaverse KW - extended reality KW - dementia KW - cognitive impairment KW - Human-centered computing / Access KW - Human-centered computing / Human computer interaction (HCI) / Interaction paradigms / Mixed / augmented reality KW - Human-centered computing / Human computer interaction (HCI) / Interaction paradigms / Virtual reality KW - Human-centered computing / Human computer interaction (HCI) / Interactiondevices KW - Human-centered computing / Human computerinteraction (HCI) / Interaction techniques Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-320199 UR - https://sites.google.com/view/accessiblemetaverse ER - TY - JOUR A1 - Breves, Priska A1 - Dodel, Nicola T1 - The influence of cybersickness and the media devices’ mobility on the persuasive effects of 360° commercials JF - Multimedia Tools and Applications N2 - With the rise of immersive media, advertisers have started to use 360° commercials to engage and persuade consumers. Two experiments were conducted to address research gaps and to validate the positive impact of 360° commercials in realistic settings. The first study (N = 62) compared the effects of 360° commercials using either a mobile cardboard head-mounted display (HMD) or a laptop. This experiment was conducted in the participants’ living rooms and incorporated individual feelings of cybersickness as a moderator. The participants who experienced the 360° commercial with the HMD reported higher spatial presence and product evaluation, but their purchase intentions were only increased when their reported cybersickness was low. The second experiment (N = 197) was conducted online and analyzed the impact of 360° commercials that were experienced with mobile (smartphone/tablet) or static (laptop/desktop) devices instead of HMDs. The positive effects of omnidirectional videos were stronger when participants used mobile devices. KW - virtual reality KW - immersive advertising KW - spatial presence KW - cybersickness KW - advertising effectiveness Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269194 SN - 1573-7721 VL - 80 IS - 18 ER - TY - JOUR A1 - Steininger, Michael A1 - Kobs, Konstantin A1 - Davidson, Padraig A1 - Krause, Anna A1 - Hotho, Andreas T1 - Density-based weighting for imbalanced regression JF - Machine Learning N2 - In many real world settings, imbalanced data impedes model performance of learning algorithms, like neural networks, mostly for rare cases. This is especially problematic for tasks focusing on these rare occurrences. For example, when estimating precipitation, extreme rainfall events are scarce but important considering their potential consequences. While there are numerous well studied solutions for classification settings, most of them cannot be applied to regression easily. Of the few solutions for regression tasks, barely any have explored cost-sensitive learning which is known to have advantages compared to sampling-based methods in classification tasks. In this work, we propose a sample weighting approach for imbalanced regression datasets called DenseWeight and a cost-sensitive learning approach for neural network regression with imbalanced data called DenseLoss based on our weighting scheme. DenseWeight weights data points according to their target value rarities through kernel density estimation (KDE). DenseLoss adjusts each data point’s influence on the loss according to DenseWeight, giving rare data points more influence on model training compared to common data points. We show on multiple differently distributed datasets that DenseLoss significantly improves model performance for rare data points through its density-based weighting scheme. Additionally, we compare DenseLoss to the state-of-the-art method SMOGN, finding that our method mostly yields better performance. Our approach provides more control over model training as it enables us to actively decide on the trade-off between focusing on common or rare cases through a single hyperparameter, allowing the training of better models for rare data points. KW - supervised learning KW - imbalanced regression KW - cost-sensitive learning KW - sample weighting KW - Kerneldensity estimation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269177 SN - 1573-0565 VL - 110 IS - 8 ER - TY - JOUR A1 - Caliskan, Aylin A1 - Crouch, Samantha A. W. A1 - Giddins, Sara A1 - Dandekar, Thomas A1 - Dangwal, Seema T1 - Progeria and aging — Omics based comparative analysis JF - Biomedicines N2 - Since ancient times aging has also been regarded as a disease, and humankind has always strived to extend the natural lifespan. Analyzing the genes involved in aging and disease allows for finding important indicators and biological markers for pathologies and possible therapeutic targets. An example of the use of omics technologies is the research regarding aging and the rare and fatal premature aging syndrome progeria (Hutchinson-Gilford progeria syndrome, HGPS). In our study, we focused on the in silico analysis of differentially expressed genes (DEGs) in progeria and aging, using a publicly available RNA-Seq dataset (GEO dataset GSE113957) and a variety of bioinformatics tools. Despite the GSE113957 RNA-Seq dataset being well-known and frequently analyzed, the RNA-Seq data shared by Fleischer et al. is far from exhausted and reusing and repurposing the data still reveals new insights. By analyzing the literature citing the use of the dataset and subsequently conducting a comparative analysis comparing the RNA-Seq data analyses of different subsets of the dataset (healthy children, nonagenarians and progeria patients), we identified several genes involved in both natural aging and progeria (KRT8, KRT18, ACKR4, CCL2, UCP2, ADAMTS15, ACTN4P1, WNT16, IGFBP2). Further analyzing these genes and the pathways involved indicated their possible roles in aging, suggesting the need for further in vitro and in vivo research. In this paper, we (1) compare “normal aging” (nonagenarians vs. healthy children) and progeria (HGPS patients vs. healthy children), (2) enlist genes possibly involved in both the natural aging process and progeria, including the first mention of IGFBP2 in progeria, (3) predict miRNAs and interactomes for WNT16 (hsa-mir-181a-5p), UCP2 (hsa-mir-26a-5p and hsa-mir-124-3p), and IGFBP2 (hsa-mir-124-3p, hsa-mir-126-3p, and hsa-mir-27b-3p), (4) demonstrate the compatibility of well-established R packages for RNA-Seq analysis for researchers interested but not yet familiar with this kind of analysis, and (5) present comparative proteomics analyses to show an association between our RNA-Seq data analyses and corresponding changes in protein expression. KW - progeria KW - aging KW - omics KW - RNA sequencing KW - bioinformatics KW - sun exposure KW - HGPS KW - IGFBP2 KW - ACKR4 KW - WNT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289868 SN - 2227-9059 VL - 10 IS - 10 ER -