TY - THES A1 - Eichelberger, Holger T1 - Aesthetics and automatic layout of UML class diagrams T1 - Ästhetik und automatisches Layout von UML Klassendiagrammen N2 - In the last years, visual methods have been introduced in industrial software production and teaching of software engineering. In particular, the international standardization of a graphical software engineering language, the Unified Modeling Language (UML) was a reason for this tendency. Unfortunately, various problems exist in concrete realizations of tools, e.g. due to a missing compliance to the standard. One problem is the automatic layout, which is required for a consistent automatic software design. The thesis derives reasons and criteria for an automatic layout method, which produces drawings of UML class diagrams according to the UML specification and issues of human computer interaction, e.g. readability. A unique set of aesthetic criteria is combined from four different disciplines involved in this topic. Based on these aethetic rules, a hierarchical layout algorithm is developed, analyzed, measured by specialized measuring techniques and compared to related work. Then, the realization of the algorithm as a Java framework is given as an architectural description. Finally, adaptions to anticipated future changes of the UML, improvements of the framework and example drawings of the implementation are given. N2 - Visuelle Techniken im Software-Entwurf haben in den letzten Jahre Einzug in Industrie und Lehre gehalten. Begünstigt wurde dies durch die Unified Modeling Language (UML), eine international standardisierte, graphische Entwurfssprache. Dennoch klaffen weite Lücken bei der Umsetzung in konkrete Tools, teils an der Realisierung des Standards, insbesondere aber auch beim automatischen Layout, das für konsistenten (teil-)automatisierten Softwareentwurf unerlässlich ist. Die Arbeit stellt zunächst Gründe und Kriterien für ein standardkonformes, menschenlesbares automatisches Layout von UML Klassendiagrammen zusammen. Ästhetische Kriterien werden aus vier unterschiedlichen Fachdisziplinen destilliert und kombiniert. Basierend auf diesen Kriterien wird danach ein hierarchischer Layoutalgorithmus entwickelt, analysiert, mit speziellen Messverfahren vermessen und mit Konkurrenzalgorithmen verglichen. Im Anschluss daran wird die Realisierung des Algorithmus als Java-Framework im Rahmen einer Architekturbeschreibung diskutiert. Anpassungen an zukünftige Entwicklungen der UML, Weiterentwicklungen des Frameworks und Beispieldiagramme, die von der Implementierung generiert wurden, runden die Arbeit ab. KW - URL KW - Klassendiagramm KW - automatisches Layout KW - UML Klassendiagramm KW - semantische Ästhetik KW - Zeichnen von Graphen KW - computergestützte Softwaretechnik KW - automatic Layout KW - UML class diagram KW - semantical aesthetic KW - graph drawing KW - CASE Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-14831 ER - TY - THES A1 - Menth, Michael T1 - Efficient admission control and routing for resilient communication networks T1 - Effiziente Zugangskontrolle und Verkehrslenkung für ausfallsichere Kommunikationsnetze N2 - This work is subdivided into two main areas: resilient admission control and resilient routing. The work gives an overview of the state of the art of quality of service mechanisms in communication networks and proposes a categorization of admission control (AC) methods. These approaches are investigated regarding performance, more precisely, regarding the potential resource utilization by dimensioning the capacity for a network with a given topology, traffic matrix, and a required flow blocking probability. In case of a failure, the affected traffic is rerouted over backup paths which increases the traffic rate on the respective links. To guarantee the effectiveness of admission control also in failure scenarios, the increased traffic rate must be taken into account for capacity dimensioning and leads to resilient AC. Capacity dimensioning is not feasible for existing networks with already given link capacities. For the application of resilient NAC in this case, the size of distributed AC budgets must be adapted according to the traffic matrix in such a way that the maximum blocking probability for all flows is minimized and that the capacity of all links is not exceeded by the admissible traffic rate in any failure scenario. Several algorithms for the solution of that problem are presented and compared regarding their efficiency and fairness. A prototype for resilient AC was implemented in the laboratories of Siemens AG in Munich within the scope of the project KING. Resilience requires additional capacity on the backup paths for failure scenarios. The amount of this backup capacity depends on the routing and can be minimized by routing optimization. New protection switching mechanisms are presented that deviate the traffic quickly around outage locations. They are simple and can be implemented, e.g, by MPLS technology. The Self-Protecting Multi-Path (SPM) is a multi-path consisting of disjoint partial paths. The traffic is distributed over all faultless partial paths according to an optimized load balancing function both in the working case and in failure scenarios. Performance studies show that the network topology and the traffic matrix also influence the amount of required backup capacity significantly. The example of the COST-239 network illustrates that conventional shortest path routing may need 50% more capacity than the optimized SPM if all single link and node failures are protected. N2 - Diese Arbeit gliedert sich in zwei Hauptteile: Ausfallsichere Zugangskontrolle und ausfallsichere Verkehrslenkung. Die Arbeit beschreibt zu Beginn den Stand der Technik für Dienstgütemechanismen in Kommunikationsnetzen und nimmt eine Kategorisierung von Zugangskontrollmethoden vor. Diese Ansätze werden hinsichtlich ihrer potentiellen Auslastung der Leitungskapaztitäten untersucht, indem die Kapazität für ein Netz mit gegebnener Topology, Verkehrsmatrix und geforderten Flussblockierwahrscheinlichkeiten dimensioniert wird. Im Falle eines Fehlers werden betroffene Flüsse automatisch über Ersatzpfade umgeleitet, was die Verkehrslast auf deren Übertragungsleitungen erhöht. Um die Wirksamkeit der Zugangskontrolle auch in Fehlerfällen zu gewährleisten, muss diese erhöhte Verkehrslast bei der Dimensionierung berücksichtigt werden, was zu einer ausfallsicheren Zugangskontrolle führt. Kapazitätsdimensionierung ist in bereits existierenden Netzen mit festen Linkbandbreiten nicht mehr möglich. Für die Anwendung von ausfallsicherer Zugangskontrolle in diesem Fall muss die Größe von verteilten Zugangskontrollbudgets gemäß der Verkehrsmatrix so angepasst werden, dass die maximale Blockierwahrscheinlichkeit aller Flüsse minimiert wird und die Kapazität aller Links in keinem Fehlerfall durch die zulässige Verkehrrate überschritten wird. Es werden unterschiedliche Algorithmen für die Lösung dieses Problems vorgeschlagen und hinsichtlich ihrer Effizienz und Fairness verglichen. Ein Prototyp für ausfallsichere Zugangskontrolle wurde im Rahmen des KING-Projektes in den Labors der Siemens AG in München implementiert. Ausfallsicherheit benötigt Zusatzkapazitäten auf den Ersatzpfaden für Fehlerfälle. Die Menge der Zusatzkapazität hängt von der Verkehrslenkung ab und kann durch Optimierung verringert werden. Es werden neue Mechanismen für Ersatzschaltungen vorgestellt, die den Verkehr schnell um Fehlerstellen im Netz herumleiten können. Sie zeichnen sich durch ihre Einfachheit aus und können z.B. in MPLS-Technologie implementiert werden. Der "Self-Protecting Multi-Path" (SPM) ist ein Multipfad, der aus disjunkten Teilpfaden besteht. Der Verkehr wird sowohl im Normalbetrieb als auch in Ausfallszenarien über alle intakten Teilpfade gemäß einer optimierten Lastverteilungsfunktion weitergeleitet. Leistungsuntersuchungen zeigen, dass die Menge an benötigter Zusatzkapazität deutlich von der Netztopologie und der Verkehrsmatrix abhängt. Das Beispiel des COST-239 Netzes veranschaulicht, dass herkömmliche Verkehrslenkung auf den kürzesten Wegen 50% mehr Kapazität benötigen kann als der optimierte SPM, wenn alle einzelnen Übertragungsleitungs- und Vermittlungsknotenausfälle geschützt werden. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/04 KW - Kommunikation KW - Netzwerk KW - Ausfallsicheres System KW - Kommunikationsnetze KW - Ausfallsicherheit KW - Zugangskontrolle KW - Verkehrslenkung KW - Communication Networks KW - Resilience KW - Admission Control KW - Routing Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-9949 ER - TY - THES A1 - Böhler, Elmar T1 - Algebraic closures in complexity theory T1 - Algebraische Hüllen in der Komplexitätstheorie N2 - We use algebraic closures and structures which are derived from these in complexity theory. We classify problems with Boolean circuits and Boolean constraints according to their complexity. We transfer algebraic structures to structural complexity. We use the generation problem to classify important complexity classes. N2 - Algebraische Hüllen und Strukturen, die mit solchen zusammenhängen, werden für die Komplexitätstheorie genutzt. Es werden Probleme im Zusammenhang mit Booleschen Schaltkreisen und Constraint-Satisfaction Problemen komplexitätstheoretisch klassifiziert. Strukturen aus der Algebra werden auf die Strukturelle Komplexität übertragen. Das Generierungsproblem, wird zur Klassifikation wichtiger Komplexitätsklassen benutzt. KW - Komplexitätstheorie KW - Komplexitätstheorie KW - Clones KW - Generierungsproblem KW - Postsche Klassen KW - Complexity Theory KW - Clones KW - Generation Problem KW - Post's Classes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-16106 ER - TY - THES A1 - Betz, Christian T1 - Scalable authoring of diagnostic case based training systems T1 - Skalierbare Erstellung diagnostischer fallbasierter Trainingssysteme N2 - Diagnostic Case Based Training Systems (D-CBT) provide learners with a means to learn and exercise knowledge in a realistic context. In medical education, D-CBT Systems present virtual patients to the learners who are asked to examine, diagnose and state therapies for these patients. Due a number of conflicting and changing requirements, e.g. time for learning, authoring effort, several systems were developed so far. These systems range from simple, easy-to-use presentation systems to highly complex knowledge based systems supporting explorative learning. This thesis presents an approach and tools to create D-CBT systems from existing sources (documents, e.g. dismissal records) using existing tools (word processors): Authors annotate and extend the documents to model the knowledge. A scalable knowledge representation is able to capture the content on multiple levels, from simple to highly structured knowledge. Thus, authoring of D-CBT systems requires less prerequisites and pre-knowledge and is faster than approaches using specialized authoring environments. Also, authors can iteratively add and structure more knowledge to adapt training cases to their learners needs. The theses also discusses the application of the same approach to other domains, especially to knowledge acquisition for the Semantic Web. N2 - Fallbasierte diagnostische Trainingssysteme (FDT) ermöglichen es Lernern, Wissen durch Anwendung in einem realistischen Kontext zu erwerben und zu festigen. In der medizinischen Ausbildung präsentieren FDT Systeme virtuelle Patienten, an denen der Lerner die Auswahl und Interpretation der richtigen Untersuchungen, die Diagnostik und die Bestimmung geeigneter Therapien erlernen und üben kann. Eine Vielzahl von Anforderungen durch die Lerner und die Autoren solcher Systeme hat zur Entwicklung unterschiedlicher Trainingsumgebungen geführt. Darunter gibt es einfache, präsentationsorientierte Systeme ebenso wie komplexe wissensbasierte Systeme, die exploratives Lernern erlauben. Diese Dissertation untersucht einen Ansatz und Werkzeuge, um FDT Systeme aus vorhandenen Daten (d.h. Dokumenten, beispielsweise Entlassschreiben) und mit Hilfe bekannter Werkzeuge (d.h. Textverarbeitung) zu entwickeln: Die Autoren annotieren dazu die Dokumente, um die Fälle zu modellieren. Eine skalierbare Wissensrepräsentation kann das so extrahierte Wissen auf verschiedenen Ebenen erfassen, angefangen mit unstrukturierten Elementen bis zu Wissensmodellen mit kausalen Beziehungen. Autoren können mit Hilfe des vorgestellten Ansatzes fallbasierte diagnostische Trainingssysteme mit geringerem Vorwissen und schneller erstellen als mit Hilfe spezialisierter Autorensysteme. Dabei können die Autoren insbesondere die Fälle sukzessive mit weiterem Wissen anreichern und so auf die Anforderungen ihrer Lerner anpassen. In der Dissertation wird darüber hinaus die Anwendung des Ansatzes und der entstandenen Werkzeuge auf andere Domänen untersucht. Besonders interessant ist dabei die Anwendung in der Wissensakquisition für das Semantic Web. KW - Computerunterstütztes Lernen KW - Medizin KW - Wissensrepräsentation KW - Trainingssystem KW - agile Prozesse KW - Semantic Web KW - d3web.Train KW - knowledge representation KW - training systems KW - agile processes KW - semantic web KW - d3web.Train Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-17885 ER - TY - THES A1 - Milbrandt, Jens T1 - Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks T1 - Effiziente Konzepte und Leistungsbewertung zum Ressourcen Management in zukünftigen IP Netzen N2 - Next generation networks (NGNs) must integrate the services of current circuit-switched telephone networks and packet-switched data networks. This convergence towards a unified communication infrastructure necessitates from the high capital expenditures (CAPEX) and operational expenditures (OPEX) due to the coexistence of separate networks for voice and data. In the end, NGNs must offer the same services as these legacy networks and, therefore, they must provide a low-cost packet-switched solution with real-time transport capabilities for telephony and multimedia applications. In addition, NGNs must be fault-tolerant to guarantee user satisfaction and to support business-critical processes also in case of network failures. A key technology for the operation of NGNs is the Internet Protocol (IP) which evolved to a common and well accepted standard for networking in the Internet during the last 25 years. There are two basically different approaches to achieve QoS in IP networks. With capacity overprovisioning (CO), an IP network is equipped with sufficient bandwidth such that network congestion becomes very unlikely and QoS is maintained most of the time. The second option to achieve QoS in IP networks is admission control (AC). AC represents a network-inherent intelligence that admits real-time traffic flows to a single link or an entire network only if enough resources are available such that the requirements on packet loss and delay can be met. Otherwise, the request of a new flow is blocked. This work focuses on resource management and control mechanisms for NGNs, in particular on AC and associated bandwidth allocation methods. The first contribution consists of a new link-oriented AC method called experience-based admission control (EBAC) which is a hybrid approach dealing with the problems inherent to conventional AC mechanisms like parameter-based or measurement-based AC (PBAC/MBAC). PBAC provides good QoS but suffers from poor resource utilization and, vice versa, MBAC uses resources efficiently but is susceptible to QoS violations. Hence, EBAC aims at increasing the resource efficiency while maintaining the QoS which increases the revenues of ISPs and postpones their CAPEX for infrastructure upgrades. To show the advantages of EBAC, we first review today’s AC approaches and then develop the concept of EBAC. EBAC is a simple mechanism that safely overbooks the capacity of a single link to increase its resource utilization. We evaluate the performance of EBAC by its simulation under various traffic conditions. The second contribution concerns dynamic resource allocation in transport networks which implement a specific network admission control (NAC) architecture. In general, the performance of different NAC systems may be evaluated by conventional methods such as call blocking analysis which has often been applied in the context of multi-service asynchronous transfer mode (ATM) networks. However, to yield more practical results than abstract blocking probabilities, we propose a new method to compare different AC approaches by their respective bandwidth requirements. To present our new method for comparing different AC systems, we first give an overview of network resource management (NRM) in general. Then we present the concept of adaptive bandwidth allocation (ABA) in capacity tunnels and illustrate the analytical performance evaluation framework to compare different AC systems by their capacity requirements. Different network characteristics influence the performance of ABA. Therefore, the impact of various traffic demand models and tunnel implementations, and the influence of resilience requirements is investigated. In conclusion, the resources in NGNs must be exclusively dedicated to admitted traffic to guarantee QoS. For that purpose, robust and efficient concepts for NRM are required to control the requested bandwidth with regard to the available transmission capacity. Sophisticated AC will be a key function for NRM in NGNs and, therefore, efficient resource management concepts like experience-based admission control and adaptive bandwidth allocation for admission-controlled capacity tunnels, as presented in this work are appealing for NGN solutions. N2 - In meiner Dissertation zum Thema “Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks” werden im Wesentlichen zwei miteinander verwobene Konzepte zur effizienten Nutzung von Übertragungsressourcen in zukünftigen IP Netzen untersucht. Das Management solcher Ressourcen ist zur Unterstützung qualitativ hochwertiger Netzdiensten (z.B. IP Telephonie, IP TV, etc.) in Zukunft unabdingbar. Gegenwärtig werden diese Dienste durch den Einsatz hoher Übertragungskapazitäten (engl. capacity overprovisioning) in den IP Breitbandnetzen ermöglicht. Um in Spitzenlastzeiten die Qualität der Dienste aufrecht zu erhalten, sind die Bandbreiten derart hoch angesetzt, dass unter normalen Umständen die Ressourcen nur sehr schwach ausgelastet sind (im Bereich zwischen 10 und 30 Prozent). Diese Überdimensionierungslösung ist einfach zu realisieren aber auch sehr kostenintensiv, ineffizient und vor allem nicht (zukunfts-)sicher, da bei ständig steigendem Bandbreitenbedarf, die Netzkapazitäten häufig angepasst werden müssen. Eine Effizienzsteigerung bei der Ressourcennutzung in heutigen Kommunikationsnetzen ist daher ein wichtiges Kriterium für die Wirtschaftlichkeit zukünftiger IP Netze. Erreicht werden kann dies mit den Mitteln der Netzzugangskontrolle (engl. admission control, kurz AC), welche bereits in verschiedenen Formen entwickelt, untersucht und teilweise auch in heutigen IP Netzen realisiert ist. Die AC stellt eine vergleichsweise komplexe Lösung zur Aufrechterhaltung der Dienstgüte in IP Netzen dar. Daher sind einfache und effiziente Mechanismen/Automatismen zur Durchführung der AC gefordert, um deren Einsatz an Stelle der Überdimensionierung zu rechtfertigen. Den zuvor genannten Forderungen nach effizienter Ressourcennutzung entsprechend stellt der erste Hauptbeitrag der Dissertation einen neuen Ansatz zur AC dar, die so genannte erfahrungsbasierte Netzzugangskontrolle (engl. experience-based admission control, kurz EBAC). Gegenüber den existierenden alternativen, d.h. parameter- oder mess-basierten Verfahren der AC zeichnet sich die EBAC durch effiziente Ressourcennutzung und begünstigt gleichzeitig die Aufrechterhaltung der Dienstgüte. Die genaue Funktionsweise der EBAC und die simulative Leistungsuntersuchung sind in der Dissertation nachzulesen. Der zweite Themenschwerpunkt der Dissertation greift eine tunnel-basierte Netzarchitektur auf und präsentiert mit deren Hilfe eine neue Methode zur Bewertung verschiedener Bandbreitenallokationsstrategien in Kombination mit AC. Die neue Bewertungsmethode wird zwar anhand einer speziellen tunnel-basierten AC untersucht, lässt sich aber auf alle Arten so genannter budget-basierter AC anwenden. Bei der konventionellen Leistungsbewertung verschiedener AC-Systeme dienen abstrakte Blockierungswahrscheinlichkeiten als Leistungsmaß. Im Gegensatz hierzu, bewertet die neue Methode die Leistung eines AC-Systems anhand des zugehörigen Bandbreitenbedarfs in Abhängigkeit verschiedener Einflussfaktoren, z.B. der avisierten Blockierwahrscheinlichkeit des AC-Systems, der Verkehrszusammensetzung, des Verkehrsvolumens, der Verkehrsdynamik und vor allem der angewandten Bandbreitenallokationsstrategie. In zukünftigen IP Netzen müssen die Ressourcen zur Datenübertragung besser verwaltet und kontrolliert werden. Zugelassener Verkehr mit hohen Dienstgüteanforderungen muss exklusiv Bandbreite zugewiesen werden, um die geforderte Dienstgüte garantieren zu können. Um dieses Ziel zu erreichen werden robuste und effiziente Konzepte zum Management von Netzressourcen benötigt. Intelligenter Netzzugangskontrolle wird eine Schlüsselfunktion in zukünftigen IP Netzen zukommen. Die in dieser Dissertation vorgestellten, effizienten Ressourcenmanagementkonzepte „erfahrungsbasierte Netzzugangskontrolle“ und „adaptive Bandbreitenallokation in zugangskontrollierten Kapazitätstunnel“ tragen zum Erreichen dieses Ziels bei. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/07 KW - Ressourcenmanagement KW - Leistungsbewertung KW - Rechnernetz KW - IP KW - Ressourcen Management KW - Leistungsbewertung KW - zukünftige Kommunikationsnetze KW - Resource Management KW - Performance Analysis KW - Next Generation Networks Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-23332 ER - TY - THES A1 - Atzmüller, Martin T1 - Knowledge-Intensive Subgroup Mining - Techniques for Automatic and Interactive Discovery T1 - Wissensintensive Subgruppenentdeckung – Automatische und Interaktive Entdeckungsmethoden N2 - Data mining has proved its significance in various domains and applications. As an important subfield of the general data mining task, subgroup mining can be used, e.g., for marketing purposes in business domains, or for quality profiling and analysis in medical domains. The goal is to efficiently discover novel, potentially useful and ultimately interesting knowledge. However, in real-world situations these requirements often cannot be fulfilled, e.g., if the applied methods do not scale for large data sets, if too many results are presented to the user, or if many of the discovered patterns are already known to the user. This thesis proposes a combination of several techniques in order to cope with the sketched problems: We discuss automatic methods, including heuristic and exhaustive approaches, and especially present the novel SD-Map algorithm for exhaustive subgroup discovery that is fast and effective. For an interactive approach we describe techniques for subgroup introspection and analysis, and we present advanced visualization methods, e.g., the zoomtable that directly shows the most important parameters of a subgroup and that can be used for optimization and exploration. We also describe various visualizations for subgroup comparison and evaluation in order to support the user during these essential steps. Furthermore, we propose to include possibly available background knowledge that is easy to formalize into the mining process. We can utilize the knowledge in many ways: To focus the search process, to restrict the search space, and ultimately to increase the efficiency of the discovery method. We especially present background knowledge to be applied for filtering the elements of the problem domain, for constructing abstractions, for aggregating values of attributes, and for the post-processing of the discovered set of patterns. Finally, the techniques are combined into a knowledge-intensive process supporting both automatic and interactive methods for subgroup mining. The practical significance of the proposed approach strongly depends on the available tools. We introduce the VIKAMINE system as a highly-integrated environment for knowledge-intensive active subgroup mining. Also, we present an evaluation consisting of two parts: With respect to objective evaluation criteria, i.e., comparing the efficiency and the effectiveness of the subgroup discovery methods, we provide an experimental evaluation using generated data. For that task we present a novel data generator that allows a simple and intuitive specification of the data characteristics. The results of the experimental evaluation indicate that the novel SD-Map method outperforms the other described algorithms using data sets similar to the intended application concerning the efficiency, and also with respect to precision and recall for the heuristic methods. Subjective evaluation criteria include the user acceptance, the benefit of the approach, and the interestingness of the results. We present five case studies utilizing the presented techniques: The approach has been successfully implemented in medical and technical applications using real-world data sets. The method was very well accepted by the users that were able to discover novel, useful, and interesting knowledge. N2 - Data Mining wird mit großem Erfolg in vielen Domänen angewandt. Subgruppenentdeckung als wichtiges Teilgebiet des Data Mining kann zum Beispiel gut im Marketing, oder zur Qualitätskontrolle und Analyse in medizinischen Domänen eingesetzt werden. Das allgemeine Ziel besteht darin, potentiell nützliches and letztendlich interessantes Wissen zu entdecken. Jedoch können diese Anforderungen im praktischen Einsatz oft nicht erfüllt werden, etwa falls die eingesetzten Methoden eine schlechte Skalierbarkeit für größere Datensätze aufweisen, falls dem Benutzer zu viele Ergebnisse präsentiert werden, oder falls der Anwender viele der gefundenen Subgruppen-Muster schon kennt. Diese Arbeit stellt eine Kombination von automatischen und interaktiven Techniken vor, um mit den genannten Problemen besser umgehen zu können: Es werden automatische heuristische und vollständige Subgruppenentdeckungs-Verfahren diskutiert, und insbesondere der neuartige SD-Map Algorithmus zur vollständigen Subgruppenentdeckung vorgestellt der sowohl schnell als auch effektiv ist. Bezüglich der interaktiven Techniken werden Methoden zur Subgruppen-Introspektion und Analyse, und fortgeschrittene Visualisierungstechniken vorgestellt, beispielsweise die Zoomtable, die die für die Subgruppenentdeckung wichtigsten Parameter direkt visualisiert und zur Optimierung und Exploration eingesetzt werden kann. Zusätzlich werden verschiedene Visualisierungen zum Vergleich und zur Evaluation von Subgruppen beschrieben um den Benutzer bei diesen essentiellen Schritten zu unterstützen. Weiterhin wird leicht zu formalisierendes Hintergrundwissen vorgestellt, das im Subgruppenentdeckungsprozess in vielfältiger Weise eingesetzt werden kann: Um den Entdeckungsprozess zu fokussieren, den Suchraum einzuschränken, und letztendlich die Effizienz der Entdeckungsmethode zu erhöhen. Insbesondere wird Hintergrundwissen eingeführt, um die Elemente der Anwendungsdomäne zu filtern, um geeignete Abstraktionen zu definieren, Werte zusammenzufassen, und die gefundenen Subgruppenmuster nachzubearbeiten. Schließlich werden diese Techniken in einen wissensintensiven Prozess integriert, der sowohl automatische als auch interaktive Methoden zur Subgruppenentdeckung einschließt. Die praktische Bedeutung des vorgestellten Ansatzes hängt stark von den verfügbaren Werkzeugen ab. Dazu wird das VIKAMINE System als hochintegrierte Umgebung für die wissensintensive aktive Subgruppenentdeckung präsentiert. Die Evaluation des Ansatzes besteht aus zwei Teilen: Hinsichtlich einer Evaluation von Effizienz und Effektivität der Verfahren wird eine experimentelle Evaluation mit synthetischen Daten vorgestellt. Für diesen Zweck wird ein neuartiger in der Arbeit entwickelter Datengenerator angewandt, der eine einfache und intuitive Spezifikation der Datencharakteristiken erlaubt. Für die Evaluation des Ansatzes wurden Daten erzeugt, die ähnliche Charakteristiken aufweisen wie die Daten des angestrebten Einsatzbereichs. Die Ergebnisse der Evaluation zeigen, dass der neuartige SD-Map Algorithmus den anderen in der Arbeit beschriebenen Standard-Algorithmen überlegen ist. Sowohl hinsichtlich der Effizienz, als auch von Precision/Recall bezogen auf die heuristischen Algorithmen bietet SD-Map deutliche Vorteile. Subjektive Evaluationskriterien sind durch die Benutzerakzeptanz, den Nutzen des Ansatzes, und die Interessantheit der Ergebnisse gegeben. Es werden fünf Fallstudien für den Einsatz der vorgestellten Techniken beschrieben: Der Ansatz wurde in medizinischen und technischen Anwendungen mit realen Daten eingesetzt. Dabei wurde er von den Benutzern sehr gut angenommen, und im praktischen Einsatz konnte neuartiges, nützliches, und interessantes Wissen entdeckt werden. KW - Data Mining KW - Algorithmus KW - Visualisierung KW - Subgruppenentdeckung KW - Hintergrundwissen KW - Wissensendeckung KW - Data Mining KW - Visualisierung KW - Subgroup Mining KW - Background Knowledge KW - Knowledge Discovery KW - Data Mining KW - Visualization Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-21004 ER - TY - THES A1 - Travers, Stephen T1 - Structural Properties of NP-Hard Sets and Uniform Characterisations of Complexity Classes T1 - Strukturelle Eigenschaften NP-harter Mengen und uniforme Charakterisierungen von Komplexitätsklassen N2 - This thesis is devoted to the study of computational complexity theory, a branch of theoretical computer science. Computational complexity theory investigates the inherent difficulty in designing efficient algorithms for computational problems. By doing so, it analyses the scalability of computational problems and algorithms and places practical limits on what computers can actually accomplish. Computational problems are categorised into complexity classes. Among the most important complexity classes are the class NP and the subclass of NP-complete problems, which comprises many important optimisation problems in the field of operations research. Moreover, with the P-NP-problem, the class NP represents the most important unsolved question in computer science. The first part of this thesis is devoted to the study of NP-complete-, and more generally, NP-hard problems. It aims at improving our understanding of this important complexity class by systematically studying how altering NP-hard sets affects their NP-hardness. This research is related to longstanding open questions concerning the complexity of unions of disjoint NP-complete sets, and the existence of sparse NP-hard sets. The second part of the thesis is also dedicated to complexity classes but takes a different perspective: In a sense, after investigating the interior of complexity classes in the first part, the focus shifts to the description of complexity classes and thereby to the exterior in the second part. It deals with the description of complexity classes through leaf languages, a uniform framework which allows us to characterise a great variety of important complexity classes. The known concepts are complemented by a new leaf-language model. To a certain extent, this new approach combines the advantages of the known models. The presented results give evidence that the connection between the theory of formal languages and computational complexity theory might be closer than formerly known. N2 - Diese Dissertation behandelt die Komplexitätstheorie, ein zentrales Teilgebiet der Theoretischen Informatik. Die Komplexitätstheorie untersucht die inhärente Schwierigkeit, effiziente Algorithmen für Berechnungsprobleme zu entwerfen. Sie analysiert die Skalierbarkeit von Berechnungsproblemen und Algorithmen und stellt grundsätzliche Grenzen für die Leistungsfähigkeit von Computern auf. Berechnungsprobleme werden in Komplexitätsklassen kategorisiert. Dabei spielen die Klasse NP und die in ihr enthaltene Klasse der NP-vollständigen Probleme eine wichtige Rolle. Letztere umfasst zahlreiche in der Praxis bedeutsame Probleme aus dem Bereich Operations Research. Darüber hinaus repräsentiert die Klasse NP mit dem P-NP Problem gleichfalls das wichtigste ungelöste Problem in der Informatik. Der erste Teil dieser Dissertation ist der Untersuchung NP-vollständiger und noch allgemeiner, NP-harter Mengen gewidmet. Durch eine systematische Untersuchung der Frage, wie sich partielle Modifikationen von Mengen auf deren NP-Härte auswirken, soll das Verständnis dieser wichtigen Komplexitätsklasse verbessert werden. Die Untersuchungen in diesem Bereich stehen in enger Verbindung zu wichtigen ungelösten Fragen, wie beispielsweise der Frage nach der Komplexität von Vereinigungen disjunkter NP-vollständiger Mengen und darüber hinaus der Frage nach der Existenz dünner, NP-harter Mengen. Der zweite Teil der Dissertation beschäftigt sich ebenfalls mit der Komplexitätstheorie, nimmt dabei aber eine andere Perspektive ein: Während im ersten Teil mit der Untersuchung struktureller Eigenschaften innere Aspekte von Komplexitätsklassen im Vordergrund stehen dreht es sich im zweiten Teil um die Beschreibung von Komplexitätsklassen. Dabei werden so genannte Blattsprachen verwendet, welche einen uniformen Beschreibungsmechanismus für Komplexitätsklassen darstellen. Die bestehenden Blattsprachen-Konzepte werden durch einen neuen Ansatz ergänzt, der in einem gewissen Sinne die Vorteile der bekannten Ansätze vereint. Die erzielten Ergebnisse sind Evidenz dafür, dass die Verbindung zwischen der Theorie der formalen Sprachen und der Komplexitätstheorie noch enger ist als bislang vermutet. KW - Berechnungskomplexität KW - Komplexität KW - Theoretische Informatik KW - NP-Vollständigkeit KW - Strukturelle Komplexität KW - NP-complete sets KW - structural complexity Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-27124 ER - TY - THES A1 - Feineis, Markus T1 - Wortgenaue Annotation digitalisierter mittelalterlicher Handschriften T1 - One-to-one Annotation of Digitised Medieval Manuscripts N2 - No abstract available KW - Annotation KW - Handschrift KW - Digitalisierung Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-30448 ER - TY - THES A1 - Mäder, Andreas T1 - Performance Models for UMTS 3.5G Mobile Wireless Systems T1 - Leistungsmodelle für UMTS 3.5G Mobilfunksysteme N2 - Mobile telecommunication systems of the 3.5th generation (3.5G) constitute a first step towards the requirements of an all-IP world. As the denotation suggests, 3.5G systems are not completely new designed from scratch. Instead, they are evolved from existing 3G systems like UMTS or cdma2000. 3.5G systems are primarily designed and optimized for packet-switched best-effort traffic, but they are also intended to increase system capacity by exploiting available radio resources more efficiently. Systems based on cdma2000 are enhanced with 1xEV-DO (EV-DO: evolution, data-optimized). In the UMTS domain, the 3G partnership project (3GPP) specified the High Speed Packet Access (HSPA) family, consisting of High Speed Downlink Packet Access (HSDPA) and its counterpart High Speed Uplink Packet Access (HSUPA) or Enhanced Uplink. The focus of this monograph is on HSPA systems, although the operation principles of other 3.5G systems are similar. One of the main contributions of our work are performance models which allow a holistic view on the system. The models consider user traffic on flow-level, such that only on significant changes of the system state a recalculation of parameters like bandwidth is necessary. The impact of lower layers is captured by stochastic models. This approach combines accurate modeling and the ability to cope with computational complexity. Adopting this approach to HSDPA, we develop a new physical layer abstraction model that takes radio resources, scheduling discipline, radio propagation and mobile device capabilities into account. Together with models for the calculation of network-wide interference and transmit powers, a discrete-event simulation and an analytical model based on a queuing-theoretical approach are proposed. For the Enhanced Uplink, we develop analytical models considering independent and correlated other-cell interference. N2 - Die vorliegende Arbeit beschäftigt sich mit Mobilfunksystemen der Generation 3.5 im Allgemeinen, und mit den UMTS-spezifischen Ausprägungen HSDPA (High Speed Downlink Packet Access) und HSUPA (High Speed Uplink Packet Access) bzw. Enhanced Uplink im speziellen. Es werden integrierte Systeme betrachtet, d.h. 3.5G Datenkanäle koexistieren mit "klassischen" UMTS Datenkanälen wie in den Spezifikationen von UMTS Release ´99 beschrieben. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/08 KW - Mobilfunk KW - Leistungsbewertung KW - UMTS KW - HSPA KW - Funkressourcenverwaltung KW - Modellierungstechniken KW - Netzwerkplanung KW - UMTS KW - HSPA KW - radio resource management KW - modeling techniques KW - network planning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-32525 ER - TY - THES A1 - Tischler, German T1 - Theory and Applications of Parametric Weighted Finite Automata T1 - Theorie und Anwendungen parametrisch gewichteter endlicher Automaten N2 - Parametric weighted finite automata (PWFA) are a multi-dimensional generalization of weighted finite automata. The expressiveness of PWFA contains the expressiveness of weighted finite automata as well as the expressiveness of affine iterated function system. The thesis discusses theory and applications of PWFA. The properties of PWFA definable sets are studied and it is shown that some fractal generator systems can be simulated using PWFA and that various real and complex functions can be represented by PWFA. Furthermore, the decoding of PWFA and the interpretation of PWFA definable sets is discussed. N2 - Parametrisch gewichtete endliche Automaten (PWFA) sind eine multidimensionale Verallgemeinerung gewichteter endlicher Automaten, die sowohl die funktionale Mächtigkeit gewichteter endlicher Automaten als auch die affiner iterierter Funktionensystem umschließt. Die Arbeit diskutiert die Theorie und Anwendungen von PWFA. Es werden Eigenschaften der von PWFA definierbaren Mengen untersucht, gezeigt dass verschiedene fraktale Generatorsysteme mit PWFA simuliert werden können und dass viele praxisrelevante reelle und komplexe Funktionen und Relationen mit PWFA darstellbar sind. Ferner wird die Dekodierung von PWFA und die Interpretation PWFA-darstellbarer Mengen diskutiert. KW - Automat KW - Automata Theory Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28145 ER - TY - THES A1 - Martin, Rüdiger T1 - Resilience, Provisioning, and Control for the Network of the Future T1 - Ausfallsicherheit, Dimensionierungsansätze und Kontrollmechanismen für das Netz der Zukunft N2 - The Internet sees an ongoing transformation process from a single best-effort service network into a multi-service network. In addition to traditional applications like e-mail,WWW-traffic, or file transfer, future generation networks (FGNs) will carry services with real-time constraints and stringent availability and reliability requirements like Voice over IP (VoIP), video conferencing, virtual private networks (VPNs) for finance, other real-time business applications, tele-medicine, or tele-robotics. Hence, quality of service (QoS) guarantees and resilience to failures are crucial characteristics of an FGN architecture. At the same time, network operations must be efficient. This necessitates sophisticated mechanisms for the provisioning and the control of future communication infrastructures. In this work we investigate such echanisms for resilient FGNs. There are many aspects of the provisioning and control of resilient FGNs such as traffic matrix estimation, traffic characterization, traffic forecasting, mechanisms for QoS enforcement also during failure cases, resilient routing, or calability concerns for future routing and addressing mechanisms. In this work we focus on three important aspects for which performance analysis can deliver substantial insights: load balancing for multipath Internet routing, fast resilience concepts, and advanced dimensioning techniques for resilient networks. Routing in modern communication networks is often based on multipath structures, e.g., equal-cost multipath routing (ECMP) in IP networks, to facilitate traffic engineering and resiliency. When multipath routing is applied, load balancing algorithms distribute the traffic over available paths towards the destination according to pre-configured distribution values. State-of-the-art load balancing algorithms operate either on the packet or the flow level. Packet level mechanisms achieve highly accurate traffic distributions, but are known to have negative effects on the performance of transport protocols and should not be applied. Flow level mechanisms avoid performance degradations, but at the expense of reduced accuracy. These inaccuracies may have unpredictable effects on link capacity requirements and complicate resource management. Thus, it is important to exactly understand the accuracy and dynamics of load balancing algorithms in order to be able to exercise better network control. Knowing about their weaknesses, it is also important to look for alternatives and to assess their applicability in different networking scenarios. This is the first aspect of this work. Component failures are inevitable during the operation of communication networks and lead to routing disruptions if no special precautions are taken. In case of a failure, the robust shortest-path routing of the Internet reconverges after some time to a state where all nodes are again reachable – provided physical connectivity still exists. But stringent availability and reliability criteria of new services make a fast reaction to failures obligatory for resilient FGNs. This led to the development of fast reroute (FRR) concepts for MPLS and IP routing. The operations of MPLS-FRR have already been standardized. Still, the standards leave some degrees of freedom for the resilient path layout and it is important to understand the tradeoffs between different options for the path layout to efficiently provision resilient FGNs. In contrast, the standardization for IP-FRR is an ongoing process. The applicability and possible combinations of different concepts still are open issues. IP-FRR also facilitates a comprehensive resilience framework for IP routing covering all steps of the failure recovery cycle. These points constitute another aspect of this work. Finally, communication networks are usually over-provisioned, i.e., they have much more capacity installed than actually required during normal operation. This is a precaution for various challenges such as network element failures. An alternative to this capacity overprovisioning (CO) approach is admission control (AC). AC blocks new flows in case of imminent overload due to unanticipated events to protect the QoS for already admitted flows. On the one hand, CO is generally viewed as a simple mechanism, AC as a more complex mechanism that complicates the network control plane and raises interoperability issues. On the other hand, AC appears more cost-efficient than CO. To obtain advanced provisioning methods for resilient FGNs, it is important to find suitable models for irregular events, such as failures and different sources of overload, and to incorporate them into capacity dimensioning methods. This allows for a fair comparison between CO and AC in various situations and yields a better understanding of the strengths and weaknesses of both concepts. Such an advanced capacity dimensioning method for resilient FGNs represents the third aspect of this work. N2 - Das Internet befindet sich gegenwärtig in einem Transformationsprozess von einem Netz mit einer einzigen best-effort Dienstklasse hin zu einem Mehr-Dienste-Netz. Zusätzlich zu herkömmlichen Anwendungen wie E-Mail, WWW oder Datenübertragung werden zukünftige Netze Dienste mit Echtzeitbedürfnissen und strikten Anforderungen an Verfügbarkeit und Zuverlässigkeit wie Voice over IP (VoIP), Videokonferenzdienste, Virtual Private Networks (VPNs) für Finanzanwendungen und andere Geschäftsanwendungen mit Echtzeitanforderungen, Tele-Medizin oder Telerobotik tragen. Daher sind die Gewährleistung von Dienstgüte und Ausfallsicherheit wesentliche Merkmale zukünftiger Netzarchitekturen. Gleichzeitig muss der Netzbetrieb effizient sein. Dies zieht den Bedarf an ausgefeilten Mechanismen für die Dimensionierung und Kontrolle ausfallsicherer Kommunikationsstrukturen nach sich. In dieser Arbeit werden solche Mechanismen, nämlich Lastaufteilung, Konzepte zur schnellen Reaktion im Fehlerfall und intelligente Ansätze zur Netzdimensionierung, untersucht. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/08 KW - Backbone-Netz KW - load balancing KW - resilience KW - fast reroute KW - admission control KW - overprovisioning Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-28497 ER - TY - THES A1 - Freiberg, Martina T1 - UI-, User-, & Usability-Oriented Engineering of Participative Knowledge-Based Systems T1 - UI-, Benutzer-, & Usability-orientierte Entwicklung partizipativer Wissensbasierter Systeme N2 - Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the ’perfect intelligent software’ continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions. In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE: (1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for ’yet another’ self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model. For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE. Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS. N2 - Das Interesse an wissensbasierten Systemen (WBS) in verschiedensten Fachdisziplinen und Anwendungskontexten wächst nach wie vor stetig. Das frühere Ziel — intelligente Software als Expertenersatz — verschiebt sich dabei allerdings kontinuierlich in Richtung partizipativer, nutzerzentrierter Anwendungen. Solche Systeme erlauben dem Benutzer, das vorhandene persönliche Hintergrundwissen in den Problemlösungsprozess mit einzubringen um die Effizienz des Systems zu steigern und die User Experience zu verbessern. Konkret definieren wir für partizipative WBS die folgenden, nichtfunktionalen Anforderungen: Transparenz (umfassende Vermittlung des Systemstatus), Konfigurierbarkeit (Anpassbarkeit an verschiedene Benutzer und Grad der Benutzerkontrolle und Explorationsmöglichkeit), Qualität sowohl der Wissensbasis als auch der Benutzeroberfläche und Fortentwickelbarkeit (Fähigkeit des WBS analog zu den Kenntnissen seiner Nutzer zu reifen). Viele dieser Anforderungen hängen stark von den jeweiligen Nutzern ab. Im Umkehrschluss erfordert dies eine nutzerzentriertere Entwicklung solcher Systeme. Die häufig sehr fachspezifischen Zieldomänen haben meist entsprechend komplexe Wissensbasen zur Folge. Dies verlangt erst Recht nach einem wohlüberlegten, durchdachten UI- und Inkteraktionsdesign. Dem zum Trotz fokussieren aktuelle WBS Entwicklungsansätze jedoch nach wie vor auf der Wissensformalisierung. Mit der Folge, dass oft keine optimalen, schlecht wiederverwendbare und nur teilweise (oder gar nicht) evaluierte WBS UI/Interaktionslösungen entstehen. Die vorliegende Dissertation schlägt einen allumfassenderen WBS Entwicklungsansatz vor. Unter Berücksichtigung der starken, wechselseitigen Beeinflussung von Wissensbasis und UI ist dieser geprägt durch eine starke Verzahnung von Wissensbasis- und UI-Entwicklung. Der Ansatz stützt sich auf drei Kernkomponenten für allumfassende Entwicklung wissensbasierter Systeme: (1) Extensible Prototyping, eine adaptierte Form des evolutionären Prototyping. Extensible Prototyping basiert auf hochentwickelten UI Prototypen und definiert zwei Erweiterungsschritte um jederzeit WBS-Kernprototypen (Wissensbasis und Kern-UI) beziehungsweise voll funktionale wissensbasierte Anwendungen (WBS Kernprototyp und Rahmenfunktionalität) zu erstellen. (2) WBS UI Patterns. Diese Patterns, oder Muster, definieren wiederverwendbare Lösungen für die Kern-UI und -Inkteraktion. In dieser Arbeit stellen wir eine Sammlung grundlegender WBS UI Patterns vor. (3) Passende Usability Techniken die sich speziell für die Evaluation von WBS Software eignen. Insgesamt streben wir keine weitere, in sich geschlossene WBS Entwicklungsmethodologie an. Vielmehr motivieren wir, existierende, Wissensformalisierungs-lastige Ansätze um die vorgeschlagenen Kernkomponenten zu erweitern. Wir demonstrieren das am agilen Prozessmodell für wissensbasierte Systeme. Für die praktische Umsetzung des vorgestellten Ansatzes stellen wir außerdem das spezialisierte WBS Prototyping- und Softwareentwicklungswerkzeug ProKEt vor. ProKEt unterstützt eine Auswahl der interessantesten WBS UI Patterns sowie zugehöriger Konfigurationsoptionen. Deren weitere Anpassung beziehungsweise Erweiterung ist auf verschiedenen Expertise-Leveln möglich. Um ebenso die Anwendung von Usability Techniken zu unterstützen, bietet ProKEt weiterhin Funktionalität für die quantitative und qualitative Datensammlung. Auch baut ProKEt bewusst auf die strikt verzahnte Entwicklung von UI- und Wissensbasis. Für die einfache und nahtlose Integration von Wissensformalisierung in den Gesamtprozess unterstützt ProKEt zwei externe Wissensformalisierungs-Werkzeuge: KnowOF, eine Wissensformalisierungsumgebung welche standartisierte Office Dokumente nutzt. Und KnowWE, ein semantisches Wiki für die kollaborative Wissensformalisierung im Web. Damit ist ProKEt ein mächtiges Werkzeug für umfassende, nutzerzentrierte WBS Entwicklung. Mithilfe des Entwicklungsansatzes und des Werkzeugs ProKEt haben wir weiterhin einen neuartigen WBS Typ entwickelt: Wissensbasierte Klärungssysteme, im Wesentlichen ein Mashup aus Beratungs-, Erklärungs- und Rechtfertigungskomponente. Diese Systeme stellen eine angepasste Realisierung von partizipativen WBS für höchst fachliche Kontexte dar und verlangten entsprechend nach einem sehr speziellen Design. In der vorliegenden Arbeit stellen wir daher neben allgemeinen WBS UI Patterns auch einige spezialisierte Varianten für wissensbasierte Klärungssysteme vor. KW - Wissensbasiertes System KW - Knowledge-based Systems Engineering KW - Expert System KW - Usability KW - UI and Interaction Design KW - User Participation KW - Expertensystem Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-106072 SN - 978-3-95826-012-2 (print) SN - 978-3-95826-013-9 (online) PB - Würzburg University Press ER - TY - THES A1 - Kaußner, Armin T1 - Dynamische Szenerien in der Fahrsimulation T1 - Dynamic scenarios for driving simulation N2 - In der Arbeit wird ein neues Konzept für Fahrsimulator-Datenbasen vorgestellt. Der Anwender entwirft eine auf seine Fragestellung zugeschnittene Datenbasis mithilfe einer einfachen Skriptsprache. Das Straßennetzwerk wird auf einer topologischen Ebene repäsentiert. In jedem Simulationsschritt wird hieraus im Sichtbarkeitsbereich des Fahrers die geometrische Repäsentation berechnet. Die für den Fahrer unsichtbaren Teile des Straßenetzwerks können während der Simulation verändert werden. Diese Veränderungen können von der Route des Fahrers oder von den in der Simulation erhobenen Messerten abhängen. Zudem kann der Anwender das Straßennetzwerk interaktiv verändern. Das vorgestellte Konzept bietet zahlreiche Möglichkeiten zur Erzeugung reproduzierbarer Szenarien für Experimente in Fahrsimulatoren. N2 - This work presents a new concept for driving simulator databases. Using a simple scripting language the user defines a database tailored for his experiment. The road network is represented in a topological way. Through this the geometrical representation is computed during the simulation in a small area surrounding the driver, including all that is visible for the driver. The parts of the road network that are not visible for the driver can be changed during simulation. This modification can depend on the route the driver takes or on measures available in the simulation. Moreover, the user can change the road network interactively. The presented concept offers various advantages for the design of reproducible scenarios in driving simulators. KW - Straßenverkehr KW - Simulation KW - Fahrsimulator KW - Fahrsimulation KW - Datenbasis KW - Straßennetzwerk KW - Szenariogenerierung KW - driving simulation KW - database KW - road network KW - scenario creation Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8286 ER - TY - THES A1 - Karch, Oliver T1 - Where am I? - Indoor localization based on range measurements T1 - Wo bin ich? - Lokalisation mit Hilfe von Entfernungsmesswerten N2 - Nowadays, robotics plays an important role in increasing fields of application. There exist many environments or situations where mobile robots instead of human beings are used, since the tasks are too hazardous, uncomfortable, repetitive, or costly for humans to perform. The autonomy and the mobility of the robot are often essential for a good solution of these problems. Thus, such a robot should at least be able to answer the question "Where am I?". This thesis investigates the problem of self-localizing a robot in an indoor environment using range measurements. That is, a robot equipped with a range sensor wakes up inside a building and has to determine its position using only its sensor data and a map of its environment. We examine this problem from an idealizing point of view (reducing it into a pure geometric one) and further investigate a method of Guibas, Motwani, and Raghavan from the field of computational geometry to solving it. Here, so-called visibility skeletons, which can be seen as coarsened representations of visibility polygons, play a decisive role. In the major part of this thesis we analyze the structures and the occurring complexities in the framework of this scheme. It turns out that the main source of complication are so-called overlapping embeddings of skeletons into the map polygon, for which we derive some restrictive visibility constraints. Based on these results we are able to improve one of the occurring complexity bounds in the sense that we can formulate it with respect to the number of reflex vertices instead of the total number of map vertices. This also affects the worst-case bound on the preprocessing complexity of the method. The second part of this thesis compares the previous idealizing assumptions with the properties of real-world environments and discusses the occurring problems. In order to circumvent these problems, we use the concept of distance functions, which model the resemblance between the sensor data and the map, and appropriately adapt the above method to the needs of realistic scenarios. In particular, we introduce a distance function, namely the polar coordinate metric, which seems to be well suited to the localization problem. Finally, we present the RoLoPro software where most of the discussed algorithms are implemented (including the polar coordinate metric). N2 - Heutzutage spielen autonome Roboter bei einer wachsenden Zahl von Anwendungsgebieten eine entscheidende Rolle. Sie werden überall dort anstelle von menschlichen Arbeitskräften eingesetzt, wo die jeweiligen Aufgaben für Menschen zu gefährlich, unangenehm, monoton oder schlicht zu teuer sind. Dabei sind die Autonomie und Mobilität des Roboters sehr oft grundlegend für eine gute Problemlösung. Ein solcher Roboter sollte also zumindest die Frage "Wo bin ich?" zufriedenstellend beantworten können. Diese Arbeit behandelt das Problem der Selbstlokalisation in einer Gebäudeumgebung mit Hilfe von Entfernungsmesswerten. Das heißt, ein Roboter - ausgestattet mit einem Entfernungssensor - wacht innerhalb eines Gebäudes auf und muss mit Hilfe seiner Sensordaten und einer Karte seiner Einsatzumgebung seine Position bestimmen. Wir betrachten eine idealisierte Variante dieser Aufgabe, die ein rein geometrisches Problem zum Inhalt hat, und untersuchen ein Verfahren von Guibas, Motwani und Raghavan aus dem Gebiet der Algorithmischen Geometrie, welches dieses löst. Hierbei spielen sogenannte Sichtbarkeitsskelette (vergröberte Darstellungen von Sichtbarkeitspolygonen) eine entscheidende Rolle. Im Hauptteil der Arbeit analysieren wir die Strukturen und die auftretenden Komplexitäten im Rahmen dieses Verfahrens. Es stellt sich heraus, dass die Hauptschwierigkeiten sogenannte überlappende Einbettungen von Skeletten in das Kartenpolygon zur Ursache haben, für die wir einige einschränkende Sichtbarkeitsbedingungen zeigen. Gestützt auf diese Resultate können wir die auftretenden Komplexitätsschranken dahingehend verbessern, dass wir diese nicht nur in Abhängigkeit der Gesamtzahl aller Kartenecken angeben, sondern in Abhängigkeit der Zahl der konkaven Ecken. Dies hat ebenfalls Auswirkungen auf die Worst-Case-Schranken für die Preprocessing-Komplexität des Verfahrens. Der zweite Teil der Arbeit vergleicht die anfangs gemachten idealisierenden Annahmen mit den Gegebenheiten realer Umgebungen und adressiert die auftretenden Probleme. Um diese zu umgehen verwenden wir das Konzept sogenannter Distanzfunktionen, welche die Ähnlichkeit zwischen den Sensordaten und der Karte modellieren, und passen das Verfahren auf geeignete Weise an die Bedürfnisse realistischer Szenarien an. Insbesondere führen wir eine Distanzfunktion ein - die Polarkoordinatenmetrik - welche sich für das Lokalisationsproblem besonders gut zu eignen scheint. Schlussendlich stellen wir die Software RoLoPro vor, in der die meisten der diskutierten Algorithmen (einschließlich der Polarkoordinatenmetrik) implementiert sind. KW - Autonomer Roboter KW - Mobiler Roboter KW - Lokalisation KW - Lokalisation KW - Autonomer Roboter KW - Sichtbarkeit KW - Ähnlichkeitsmaß KW - Algorithmische Geometrie KW - Localization KW - Autonomous Robot KW - Visibility KW - Similarity Measure KW - Computational Geometry Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8442 ER - TY - RPRT A1 - Rossa, Christian T1 - Inside 2004: Multimedia und Services T1 - Inside 2004: Multimedia and Services N2 - Einzelne Artikel zu den Themen Multimedia, Dienstleistungen, IT-Sicherheit und Hochschulnetz des Rechenzentrums der Universität Würzburg N2 - Some articles concerning multimedia, services, IT security and university network in the computer center of the University of Wuerzburg KW - Multimedia KW - Dienstleistungen KW - IT-Sicherheit KW - Hochschulnetz KW - Multimedia KW - Services KW - IT Security KW - university network Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-8616 ER - TY - THES A1 - Wolz, Frank T1 - Ein generisches Konzept zur Modellierung und Bewertung feldprogrammierbarer Architekturen T1 - A generic concept for modelling and evaluating field-programmable architectures N2 - Gegenstand der Arbeit stellt eine erstmalig unternommene, architekturübergreifende Studie über feldprogrammierbare Logikbausteine zur Implementierung synchroner Schaltkreise dar. Zunächst wird ein Modell für allgemeine feldprogrammiebare Architekturen basierend auf periodischen Graphen definiert. Schließlich werden Bewertungsmaße für Architekturen und Schaltkreislayouts angegeben zur Charakterisierung struktureller Eigenschaften hinsichtlich des Verhaltens in Chipflächenverbrauch und Signalverzögerung. Ferner wird ein generisches Layout-Werkzeug entwickelt, das für beliebige Architekturen und Schaltkreise Implementierungen berechnen und bewerten kann. Abschließend werden neun ressourcenminimalistische Architekturen mit Maschen- und mit Inselstruktur einander gegenübergestellt. N2 - This work presents a first architecture-spreading study on field-programmable logical devices leaving the beaten tracks of commercial architecture improvements. After a formal model for general field-programmable architectures based on periodic graphs has been given, some feasible evaluation metrics for architectures and circuit layouts are defined characterizing structural properties of architectures in respect of chip area usage and performance. Then, a generic layout tool is developped working on arbitrary architecures and circuits. Finally, nine resource minimal mesh- and island-style architectures are compared. KW - Gay-Array-Bauelement KW - Programmierbare logische Anordnung KW - Field programmable gate array KW - Feldprogrammierbare Architekturen KW - Field-programmable Gate Arrays KW - field-programmable architectures KW - field-programmable gate arrays Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-7944 ER - TY - THES A1 - Höhn, Holger T1 - Multimediale, datenbankgestützte Lehr- und Lernplattformen T1 - Multimedia, Database Supported Teaching and Learning Environments N2 - Die Dissertation befaßt sich mit der Entwicklung einer multimedialen, datenbankgestützten Lehr- und Lernplattform. Die entwickelten Module ermöglichen und erweitern nicht nur die Möglichkeit des Selbststudiums für den Studenten sondern erleichtern auch die Arbeit der Dozenten. Außerdem wird auch die Zusammenarbeit und der Austausch von Lernobjekten zwischen verschiedenen Institutionen ermöglicht. In der Lehr- und Lernplattform können verschiedene Lernobjekt-Typen verwaltet werden. Exemplarisch wurden die Typen Bilder, 3D-Animationen, Vorlesungen, Lerntexte, Fallbeispiele und Quizelemente integriert. Die Lehr- und Lernplattform besteht aus drei Bausteinen: 1. In der Lernobjekt-Datenbank werden alle Lernobjekt-Typen und Lernobjekte verwaltet. 2. Autorenwerkzeuge dienen zur Erstellung von Lernobjekten. 3. In der Lernplattform werden die Lernobjekte den Studenten zum (Selbst-)Lernen präsentiert. Neben den Vorteilen, die der Einsatz von E-Learning im allgemeinen bietet, wie die flexible Lernorganisation oder die Nutzung von Lerninhalten unabhängig von Ort und Zeit, zeichnet sich die entwickelte Lehr- und Lernplattform besonders durch folgende Punkte aus: Generierung von Lerninhalten höherer Qualität durch multizentrische Expertenbündelung und Arbeitsteilung, Erweiterbarkeit auf andere, neue Lernobjekt-Typen, Verwaltbarkeit, Konsistenz, Flexibilität, geringer Verwaltungsaufwand, Navigationsmöglichkeiten für den Studenten, Personalisierbarkeit und Konformität zu internationalen Standards. Sowohl bei der Modellierung als auch bei der Umsetzung wurde darauf geachtet, möglichst gut die Anforderungen der Dermatologie bei gleichzeitiger Erweiterbarkeit auf andere, ähnliche Szenarien zu erfüllen. Besonders einfach sollte die Anpassung der Plattform für andere bildorientierte Disziplinen sein. N2 - In this thesis a multimedia teaching and learning environment was developed. The center of interest are learning objects which can be classified into different types. The types and objects are stored and adminstered in a database. As examples lectures, learning texts, 3D-animations, images, videos and quiz elements were integrated. For the generation of learning objects authoring tools were developed for each type. The teaching and learning environment offers the following features: lectureres are supported in preparing lectures. Because learning objects can be exchanged between different environments, the generation of "high quality" objects is encouraged. New types of learning objects can be integrated easily. Students are able to learn time-independent. The system was tested in dermatology, but the adaption to other, especially visually oriented disciplines is easy. KW - Multimedia KW - Anwendung KW - Forschung KW - Lehre KW - Lehre KW - Multimedia KW - Datenbanken KW - Lernen KW - Multimedia KW - Learning KW - Teaching KW - Databases Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-4049 ER - TY - GEN A1 - Rossa, Christian T1 - Inside 2003: IT-Sicherheit T1 - Inside 2003: IT Security N2 - Einzelne Artikel zum Thema IT-Sicherheit an der Universität Würzburg N2 - Some articles concerning IT security at the University of Wuerzburg KW - Datenübertragung ; Datensicherung ; Informationstechnik ; Internet ; Computersicherheit KW - IT-Sicherheit KW - Firewall KW - Computervirus KW - Spam-Mail KW - Webmail-System KW - IT Security KW - firewall KW - computer virus KW - spam mail KW - webmail system Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-6061 ER - TY - THES A1 - Klein, Dominik Werner T1 - Design and Evaluation of Components for Future Internet Architectures T1 - Entwurf und Bewertung von Komponenten für zukünftige Internet Architekturen N2 - Die derzeitige Internetarchitektur wurde nicht in einem geplanten Prozess konzipiert und entwickelt, sondern hat vielmehr eine evolutionsartige Entwicklung hinter sich. Auslöser für die jeweiligen Evolutionsschritte waren dabei meist aufstrebende Anwendungen, welche neue Anforderungen an die zugrundeliegende Netzarchitektur gestellt haben. Um diese Anforderungen zu erfüllen, wurden häufig neuartige Dienste oder Protokolle spezifiziert und in die bestehende Architektur integriert. Dieser Prozess ist jedoch meist mit hohem Aufwand verbunden und daher sehr träge, was die Entwicklung und Verbreitung innovativer Dienste beeinträchtigt. Derzeitig diskutierte Konzepte wie Software-Defined Networking (SDN) oder Netzvirtualisierung (NV) werden als eine Möglichkeit angesehen, die Altlasten der bestehenden Internetarchitektur zu lösen. Beiden Konzepten gemein ist die Idee, logische Netze über dem physikalischen Substrat zu betreiben. Diese logischen Netze sind hochdynamisch und können so flexibel an die Anforderungen der jeweiligen Anwendungen angepasst werden. Insbesondere erlaubt das Konzept der Virtualisierung intelligentere Netzknoten, was innovative neue Anwendungsfälle ermöglicht. Ein häufig in diesem Zusammenhang diskutierter Anwendungsfall ist die Mobilität sowohl von Endgeräten als auch von Diensten an sich. Die Mobilität der Dienste wird hierbei ausgenutzt, um die Zugriffsverzögerung oder die belegten Ressourcen im Netz zu reduzieren, indem die Dienste zum Beispiel in für den Nutzer geographisch nahe Datenzentren migriert werden. Neben den reinen Mechanismen bezüglich Dienst- und Endgerätemobilität sind in diesem Zusammenhang auch geeignete Überwachungslösungen relevant, welche die vom Nutzer wahrgenommene Dienstgüte bewerten können. Diese Lösungen liefern wichtige Entscheidungshilfen für die Migration oder überwachen mögliche Effekte der Migration auf die erfahrene Dienstgüte beim Nutzer. Im Falle von Video Streaming ermöglicht ein solcher Anwendungsfall die flexible Anpassung der Streaming Topologie für mobile Nutzer, um so die Videoqualität unabhängig vom Zugangsnetz aufrechterhalten zu können. Im Rahmen dieser Doktorarbeit wird der beschriebene Anwendungsfall am Beispiel einer Video Streaming Anwendung näher analysiert und auftretende Herausforderungen werden diskutiert. Des Weiteren werden Lösungsansätze vorgestellt und bezüglich ihrer Effizienz ausgewertet. Im Detail beschäftigt sich die Arbeit mit der Leistungsanalyse von Mechanismen für die Dienstmobilität und entwickelt eine Architektur zur Optimierung der Dienstmobilität. Im Bereich Endgerätemobilität werden Verbesserungen entwickelt, welche die Latenz zwischen Endgerät und Dienst reduzieren oder die Konnektivität unabhängig vom Zugangsnetz gewährleisten. Im letzten Teilbereich wird eine Lösung zur Überwachung der Videoqualität im Netz entwickelt und bezüglich ihrer Genauigkeit analysiert. N2 - Today’s Internet architecture was not designed from scratch but was driven by new services that emerged during its development. Hence, it is often described as patchwork where additional patches are applied in case new services require modifications to the existing architecture. This process however is rather slow and hinders the development of innovative network services with certain architecture or network requirements. Currently discussed technologies like Software-Defined Networking (SDN) or Network Virtualization (NV) are seen as key enabling technologies to overcome this rigid best effort legacy of the Internet. Both technologies offer the possibility to create virtual networks that accommodate the specific needs of certain services. These logical networks are operated on top of a physical substrate and facilitate flexible network resource allocation as physical resources can be added and removed depending on the current network and load situation. In addition, the clear separation and isolation of networks foster the development of application-aware networks that fulfill the special requirements of emerging applications. A prominent use case that benefits from these extended capabilities of the network is denoted with service component mobility. Services hosted on Virtual Machines (VMs) follow their consuming mobile endpoints, so that access latency as well as consumed network resources are reduced. Especially for applications like video streaming, which consume a large fraction of the available resources, is this an important means to relieve the resource constraints and eventually provide better service quality. Service and endpoint mobility both allow an adaptation of the used paths between an offered service, i.e., video streaming and the consuming users in case the service quality drops due to network problems. To make evidence-based adaptations in case of quality drops, a scalable monitoring component is required that is able to monitor the service quality for video streaming applications with reliable accuracy. This monograph details challenges that arise when deploying a certain service, i.e., video streaming, in a future virtualized network architecture and discusses possible solutions. In particular, this work evaluates the performance of mechanisms enabling service mobility and presents an optimized architecture for service mobility. Concerning endpoint mobility, improvements are developed that reduce the latency between endpoints and consumed services and ensure connectivity regardless of the used mobile access network. In the last part, a network-based video quality monitoring solution is developed and its accuracy is evaluated. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/14 KW - Leistungsbewertung KW - Netzwerkmanagement KW - Virtuelles Netzwerk KW - Mobiles Internet KW - Service Mobility KW - Endpoint Mobility KW - Video Quality Monitoring Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-93134 SN - 1432-8801 ER - TY - THES A1 - Fink, Martin T1 - Crossings, Curves, and Constraints in Graph Drawing T1 - Kreuzungen, Kurven und Constraints beim Zeichnen von Graphen N2 - In many cases, problems, data, or information can be modeled as graphs. Graphs can be used as a tool for modeling in any case where connections between distinguishable objects occur. Any graph consists of a set of objects, called vertices, and a set of connections, called edges, such that any edge connects a pair of vertices. For example, a social network can be modeled by a graph by transforming the users of the network into vertices and friendship relations between users into edges. Also physical networks like computer networks or transportation networks, for example, the metro network of a city, can be seen as graphs. For making graphs and, thereby, the data that is modeled, well-understandable for users, we need a visualization. Graph drawing deals with algorithms for visualizing graphs. In this thesis, especially the use of crossings and curves is investigated for graph drawing problems under additional constraints. The constraints that occur in the problems investigated in this thesis especially restrict the positions of (a part of) the vertices; this is done either as a hard constraint or as an optimization criterion. N2 - Viele Probleme, Informationen oder Daten lassen sich mit Hilfe von Graphen modellieren. Graphen können überall dort eingesetzt werden, wo Verbindungen zwischen unterscheidbaren Objekten auftreten. Ein Graph besteht aus einer Menge von Objekten, genannt Knoten, und einer Menge von Verbindungen, genannt Kanten, zwischen je einem Paar von Knoten. Ein soziales Netzwerk lässt sich etwa als Graph modellieren, indem die teilnehmenden Personen als Knoten und Freundschaftsbeziehungen als Kanten dargestellt werden. Physikalische Netzwerke wie etwa Computernetze oder Transportnetze - wie beispielsweise das U-Bahnliniennetz einer Stadt - lassen sich ebenfalls als Graph auffassen. Um Graphen und die damit modellierten Daten gut erfassen zu können benötigen wir eine Visualisierung. Das Graphenzeichnen befasst sich mit dem Entwickeln von Algorithmen zur Visualisierung von Graphen. Diese Dissertation beschäftigt sich insbesondere mit dem Einsatz von Kreuzungen und Kurven beim Zeichnen von Graphen unter Nebenbedingungen (Constraints). Die in den untersuchten Problemen auftretenden Nebenbedingungen sorgen unter anderem dafür, dass die Lage eines Teils der Knoten - als feste Anforderung oder als Optimierungskriterium - vorgegeben ist. KW - Graphenzeichnen KW - Kreuzung KW - Kurve KW - Graph KW - graph drawing KW - crossing minimization KW - curves KW - labeling KW - metro map KW - Kreuzungsminimierung KW - Landkartenbeschriftung KW - U-Bahnlinienplan Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-98235 SN - 978-3-95826-002-3 (print) SN - 978-3-95826-003-0 (online) PB - Würzburg University Press ER - TY - THES A1 - Jarschel, Michael T1 - An Assessment of Applications and Performance Analysis of Software Defined Networking T1 - Eine Untersuchung von Anwendungen und Leistungsbewertung von Software Defined Networking N2 - With the introduction of OpenFlow by the Stanford University in 2008, a process began in the area of network research, which questions the predominant approach of fully distributed network control. OpenFlow is a communication protocol that allows the externalization of the network control plane from the network devices, such as a router, and to realize it as a logically-centralized entity in software. For this concept, the term "Software Defined Networking" (SDN) was coined during scientific discourse. For the network operators, this concept has several advantages. The two most important can be summarized under the points cost savings and flexibility. Firstly, it is possible through the uniform interface for network hardware ("Southbound API"), as implemented by OpenFlow, to combine devices and software from different manufacturers, which increases the innovation and price pressure on them. Secondly, the realization of the network control plane as a freely programmable software with open interfaces ("Northbound API") provides the opportunity to adapt it to the individual circumstances of the operator's network and to exchange information with the applications it serves. This allows the network to be more flexible and to react more quickly to changing circumstances as well as transport the traffic more effectively and tailored to the user’s "Quality of Experience" (QoE). The approach of a separate network control layer for packet-based networks is not new and has already been proposed several times in the past. Therefore, the SDN approach has raised many questions about its feasibility in terms of efficiency and applicability. These questions are caused to some extent by the fact that there is no generally accepted definition of the SDN concept to date. It is therefore a part of this thesis to derive such a definition. In addition, several of the open issues are investigated. This Investigations follow the three aspects: Performance Evaluation of Software Defined Networking, applications on the SDN control layer, and the usability of SDN Northbound-API for creation application-awareness in network operation. Performance Evaluation of Software Defined Networking: The question of the efficiency of an SDN-based system was from the beginning one of the most important. In this thesis, experimental measurements of the performance of OpenFlow-enabled switch hardware and control software were conducted for the purpose of answering this question. The results of these measurements were used as input parameters for establishing an analytical model of the reactive SDN approach. Through the model it could be determined that the performance of the software control layer, often called "Controller", is crucial for the overall performance of the system, but that the approach is generally viable. Based on this finding a software for analyzing the performance of SDN controllers was developed. This software allows the emulation of the forwarding layer of an SDN network towards the control software and can thus determine its performance in different situations and configurations. The measurements with this software showed that there are quite significant differences in the behavior of different control software implementations. Among other things it has been shown that some show different characteristics for various switches, in particular in terms of message processing speed. Under certain circumstances this can lead to network failures. Applications on the SDN control layer: The core piece of software defined networking are the intelligent network applications that operate on the control layer. However, their development is still in its infancy and little is known about the technical possibilities and their limitations. Therefore, the relationship between an SDN-based and classical implementation of a network function is investigated in this thesis. This function is the monitoring of network links and the traffic they carry. A typical approach for this task has been built based on Wiretapping and specialized measurement hardware and compared with an implementation based on OpenFlow switches and a special SDN control application. The results of the comparison show that the SDN version can compete in terms of measurement accuracy for bandwidth and delay estimation with the traditional measurement set-up. However, a compromise has to be found for measurements below the millisecond range. Another question regarding the SDN control applications is whether and how well they can solve existing problems in networks. Two programs have been developed based on SDN in this thesis to solve two typical network issues. Firstly, the tool "IPOM", which enables considerably more flexibility in the study of effects of network structures for a researcher, who is confined to a fixed physical test network topology. The second software provides an interface between the Cloud Orchestration Software "OpenNebula" and an OpenFlow controller. The purpose of this software was to investigate experimentally whether a pre-notification of the network of an impending relocation of a virtual service in a data center is sufficient to ensure the continuous operation of that service. This was demonstrated on the example of a video service. Usability of the SDN Northbound API for creating application-awareness in network operation: Currently, the fact that the network and the applications that run on it are developed and operated separately leads to problems in network operation. SDN offers with the Northbound-API an open interface that enables the exchange between information of both worlds during operation. One aim of this thesis was to investigate whether this interface can be exploited so that the QoE experienced by the user can be maintained on high level. For this purpose, the QoE influence factors were determined on a challenging application by means of a subjective survey study. The application is cloud gaming, in which the calculation of video game environments takes place in the cloud and is transported via video over the network to the user. It was shown that apart from the most important factor influencing QoS, i.e., packet loss on the downlink, also the type of game type and its speed play a role. This demonstrates that in addition to QoS the application state is important and should be communicated to the network. Since an implementation of such a state conscious SDN for the example of Cloud Gaming was not possible due to its proprietary implementation, in this thesis the application “YouTube video streaming” was chosen as an alternative. For this application, status information is retrievable via the "Yomo" tool and can be used for network control. It was shown that an SDN-based implementation of an application-aware network has distinct advantages over traditional network management methods and the user quality can be obtained in spite of disturbances. N2 - Mit der Vorstellung von OpenFlow durch die Stanford Universität im Jahre 2008 begann ein Prozess im Bereich der Netzwerkforschung, der den vorherrschenden Ansatz der völlig verteilten Netzsteuerung in Frage stellt. Bei OpenFlow handelt es sich um ein Kommunikationsprotokoll, das es ermöglicht die Netzsteuerung aus den Netzwerkgeräten, z. B. einem Router, herauszulösen und als logisch-zentralisierte Einheit als reine Software zu realisieren. Ein Konzept für das im Verlauf des wissenschaftlichen Diskurses der Begriff „Software Defined Networking“ (SDN) geprägt wurde. Für die Betreiber von Netzwerken hat dieses Konzept verschiedene Vorteile. Die beiden wichtigsten lassen sich unter den Punkten Kostenersparnis und Flexibilität zusammenfassen. Zum einen ist es durch die einheitliche Schnittstelle zur Netzwerkhardware („Southbound-API“), wie sie von OpenFlow realisiert wird, möglich Geräte und Software verschiedener Hersteller miteinander zu kombinieren, was den Innovations- und Preisdruck auf diese erhöht. Zum anderen besteht durch die Realisierung der Netzwerksteuerung als frei programmierbare Software mit offenen Schnittstellen („Northbound-API“) die Möglichkeit diese an die individuellen Gegebenheiten des Betreibernetzes anzupassen als auch Informationen mit den Applikationen auszutauschen, die es bedient. Dadurch kann das Netz viel flexibler und schneller auf sich ändernde Gegebenheiten reagieren und den Verkehr effektiver und auf die vom Nutzer erfahrene „Quality of Experience“ (QoE) abgestimmt transportieren. Der Ansatz einer von der Hardware getrennten Netzwerkkontrollschicht für paket-basierte Netze ist nicht neu und wurde in der Vergangenheit bereits mehrfach vorgeschlagen. Daher sah und sieht sich der Ansatz von SDN vielen Fragen nach seiner Realisierbarkeit im Bezug auf Leistungsfähigkeit und Anwendbarkeit gegenüber. Diese Fragen rühren zum Teil auch daher, dass es bis dato keine allgemein anerkannte Definition des SDN Begriffes gibt. Daher ist es ein Teil dieser Doktorarbeit eine solche Definition herzuleiten. Darüber hinaus werden verschiedene der offenen Fragen auf ihre Lösung hin untersucht. Diese Untersuchungen folgen drei Teilaspekten: Leistungsbewertung von Software Defined Networking, Anwendungen auf der SDN Kontrollschicht und die Nutzbarkeit der SDN Northbound-API zum Herstellen eines Applikationsbewusstseins im Netzbetrieb. Leistungsbewertung von Software Defined Networking: Die Frage nach der Leistungsfähigkeit eines SDN-basierten Systems war von Beginn an eine der wichtigsten. In dieser Doktorarbeit wurden zu diesem Zweck experimentelle Messungen zur Leistung OpenFlow-fähiger Switch Hardware und Kontrollsoftware durchgeführt. Die Ergebnisse dieser Messungen dienten als Eingabeparameter zur Aufstellung eines analytischen Modells des reaktiven SDN Ansatzes. Durch das Modell ließ sich bestimmen, dass die Leistungsfähigkeit der Software Kontrollschicht, oft „Controller“ genannt, von entscheidender Bedeutung für die Gesamtleistung des Systems ist, aber der Ansatz insgesamt tragfähig ist. Basierend auf dieser Erkenntnis wurde eine Software zur Analyse der Leistungsfähigkeit von SDN Controllern entwickelt. Diese Software ermöglicht die Emulation der Weiterleitungsschicht eines SDN Netzes gegenüber der Kontrollsoftware und kann so deren Leistungsdaten in verschiedenen Situationen und Konfigurationen bestimmen. Die Messungen mit dieser Software zeigten, dass es durchaus gravierende Unterschiede im Verhalten verschiedener Kontrollsoftware Implementierungen gibt. Unter anderem konnte gezeigt werden, dass einige gegenüber verschiedenen Switches ein unterschiedliches Verhalten aufweisen, insbesondere in der Abarbeitungsgeschwindigkeit von Nachrichten. Ein Umstand der in bestimmten Fällen zu Netzausfällen führen kann. Anwendungen auf der SDN Kontrollschicht: Das Kernstück von Software Defined Networking sind die intelligenten Netzwerkapplikationen, die auf der Kontrollschicht betrieben werden. Allerdings steht deren Entwicklung noch am Anfang und es ist wenig über die technischen Möglichkeiten und deren Grenzen bekannt. Daher wurde in dieser Doktorarbeit der Frage nachgegangen, in welchem Verhältnis sich die Realisierung einer Netzwerkaufgabe mit SDN zur klassischen Umsetzung dieser bewegt. Bei dieser Aufgabe handelt es sich im speziellen um das Monitoring von Links und dem darauf befindlichen Netzwerkverkehr. Hier wurde ein typischer Ansatz für diese Aufgabe basierend auf Wiretapping und spezieller Messhardware aufgebaut und mit einer Implementierung durch OpenFlow Switches und einer speziellen SDN Kontrollapplikation verglichen. Die Ergebnisse des Vergleiches zeigen, dass die SDN Variante im Bezug auf Bandbreiten und Verzögerungsabschätzung durchaus mit dem traditionellen Messaufbau im Bezug auf Messgenauigkeit mithalten kann. Jedoch müssen Abstriche bezüglich der Verzögerungsmessung unterhalb des Millisekundenbereiches gemacht werden. Eine weitere Frage bezüglich der SDN Kontrollapplikationen besteht darin, ob und wie gut sich bestehende Probleme in Netzwerken jetzt mit SDN lösen lassen. Diesbezüglich wurden in dieser Doktorarbeit zwei Programme auf SDN Basis entwickelt, die zwei typische Netzwerkprobleme lösen. Zum einen das Tool „IPOM“, dass es ermöglicht via SDN auf Basis einer festen physikalischen Testnetz-Topologie eine andere zu emulieren und so einem Forscher auf dem Testnetz deutlich mehr Flexibilität bei der Untersuchung von Auswirkungen anderer Netzstrukturen zu ermöglichen. Die zweite Software stellt eine Schnittstelle zwischen der Cloud Orchestration Software „OpenNebula“ und einem OpenFlow Controller dar. Der Zweck dieser Software war es experimentell zu untersuchen, ob eine Vorwarnung des Netzes vor einem bevorstehenden Umzug eines virtuellen Dienstes in einem Datenzentrum hinreichend ist, um den kontinuierlichen Betrieb dieses Dienstes zu gewährleisten. Dieses konnte am Beispiel eines Videodienstes demonstriert werden. Nutzbarkeit der SDN Northbound-API zum Herstellen eines Applikationsbewusstseins im Netzbetrieb: Aktuell führt die Tatsache, dass Netz und Applikationen, die darauf laufen, separat entwickelt und betrieben werden zu Problemen im Netzbetrieb. SDN bietet mit der Northbound-API eine Schnittstelle an, die den Austausch zwischen Informationen beider Welten im Betrieb ermöglicht. Ein Ziel dieser Doktorarbeit war es zu untersuchen, ob sich diese Schnittstelle ausnutzen lässt, so dass die vom Nutzer erfahrene QoE hoch gehalten werden kann. Zu diesem Zwecke wurden zunächst mittels einer subjektiven Umfragestudie die Einflussfaktoren auf eine anspruchsvolle Applikation bestimmt. Bei der Applikation handelt es sich um Cloud Gaming, bei dem die Berechnung der Videospiele Umgebung in der Cloud stattfindet und per Video über das Netz transportiert wird. Hier konnte gezeigt werden, dass neben dem wichtigsten QoS Einflussfaktor Paketverlust auf dem Downlink auch die Art des Spieltyps und dessen Geschwindigkeit eine Rolle spielen. Dies belegt, dass neben QoS auch der Applikationszustand wichtig ist und dem Netz mitgeteilt werden sollte. Da eine Umsetzung eines solchen zustandsbewussten SDNs für das Beispiel Cloud Gaming auf Grund dessen proprietärer Implementierung nicht möglich war, wurde in dieser Doktorarbeit auf die Applikation YouTube Video Streaming ausgewichen. Für diese sind mit Hilfe des Tools „YoMo“ Statusinformationen abfragbar und können zur Netzsteuerung genutzt werden. Es konnte gezeigt werden, dass eine SDN-basierte Realisierung eines applikationsbewussten Netzes deutliche Vorteile gegenüber klassischen Netzwerk Management Methoden aufweist und die Nutzerqualität trotz Störfaktoren erhalten werden kann. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 03/14 KW - Leistungsbewertung KW - Netzwerk KW - Software Defined Networking KW - Quality of Experience KW - Cloud Gaming KW - Performance Evaluation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-100795 SN - 1432-8801 ER - TY - CHAP A1 - Schlosser, Daniel A1 - Jarschel, Michael A1 - Duelli, Michael A1 - Hoßfeld, Tobias A1 - Hoffmann, Klaus A1 - Hoffmann, Marco A1 - Morper, Hans Jochen A1 - Jurca, Dan A1 - Khan, Ashiq T1 - A Use Case Driven Approach to Network Virtualization N2 - In today's Internet, services are very different in their requirements on the underlying transport network. In the future, this diversity will increase and it will be more difficult to accommodate all services in a single network. A possible approach to cope with this diversity within future networks is the introduction of support for running isolated networks for different services on top of a single shared physical substrate. This would also enable easy network management and ensure an economically sound operation. End-customers will readily adopt this approach as it enables new and innovative services without being expensive. In order to arrive at a concept that enables this kind of network, it needs to be designed around and constantly checked against realistic use cases. In this contribution, we present three use cases for future networks. We describe functional blocks of a virtual network architecture, which are necessary to support these use cases within the network. Furthermore, we discuss the interfaces needed between the functional blocks and consider standardization issues that arise in order to achieve a global consistent control and management structure of virtual networks. KW - Virtualisierung KW - Datenkommunikationsnetz KW - Internet KW - Rechnernetz KW - Anwendungsfall KW - Netzvirtualisierung KW - Standardisierung KW - Use case KW - network virtualization KW - future Internet architecture KW - standardization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55611 N1 - Accepted at IEEE Kaleidoscope 2010 ER - TY - JOUR A1 - Atienza, Nieves A1 - de Castro, Natalia A1 - Cortés, Carmen A1 - Garrido, M. Ángeles A1 - Grima, Clara I. A1 - Hernández, Gregorio A1 - Márquez, Alberto A1 - Moreno-González, Auxiliadora A1 - Nöllenburg, Martin A1 - Portillo, José Ramón A1 - Reyes, Pedro A1 - Valenzuela, Jesús A1 - Trinidad Villar, Maria A1 - Wolff, Alexander T1 - Cover contact graphs N2 - We study problems that arise in the context of covering certain geometric objects called seeds (e.g., points or disks) by a set of other geometric objects called cover (e.g., a set of disks or homothetic triangles). We insist that the interiors of the seeds and the cover elements are pairwise disjoint, respectively, but they can touch. We call the contact graph of a cover a cover contact graph (CCG). We are interested in three types of tasks, both in the general case and in the special case of seeds on a line: (a) deciding whether a given seed set has a connected CCG, (b) deciding whether a given graph has a realization as a CCG on a given seed set, and (c) bounding the sizes of certain classes of CCG’s. Concerning (a) we give efficient algorithms for the case that seeds are points and show that the problem becomes hard if seeds and covers are disks. Concerning (b) we show that this problem is hard even for point seeds and disk covers (given a fixed correspondence between graph vertices and seeds). Concerning (c) we obtain upper and lower bounds on the number of CCG’s for point seeds. KW - Informatik Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-78845 ER - TY - THES A1 - Hock, David Rogér T1 - Analysis and Optimization of Resilient Routing in Core Communication Networks T1 - Analyse und Optimierung von ausfallsicherem Routing in Kernkommunikationsnetzen N2 - Routing is one of the most important issues in any communication network. It defines on which path packets are transmitted from the source of a connection to the destination. It allows to control the distribution of flows between different locations in the network and thereby is a means to influence the load distribution or to reach certain constraints imposed by particular applications. As failures in communication networks appear regularly and cannot be completely avoided, routing is required to be resilient against such outages, i.e., routing still has to be able to forward packets on backup paths even if primary paths are not working any more. Throughout the years, various routing technologies have been introduced that are very different in their control structure, in their way of working, and in their ability to handle certain failure cases. Each of the different routing approaches opens up their own specific questions regarding configuration, optimization, and inclusion of resilience issues. This monograph investigates, with the example of three particular routing technologies, some concrete issues regarding the analysis and optimization of resilience. It thereby contributes to a better general, technology-independent understanding of these approaches and of their diverse potential for the use in future network architectures. The first considered routing type, is decentralized intra-domain routing based on administrative IP link costs and the shortest path principle. Typical examples are common today's intra-domain routing protocols OSPF and IS-IS. This type of routing includes automatic restoration abilities in case of failures what makes it in general very robust even in the case of severe network outages including several failed components. Furthermore, special IP-Fast Reroute mechanisms allow for a faster reaction on outages. For routing based on link costs, traffic engineering, e.g. the optimization of the maximum relative link load in the network, can be done indirectly by changing the administrative link costs to adequate values. The second considered routing type, MPLS-based routing, is based on the a priori configuration of primary and backup paths, so-called Label Switched Paths. The routing layout of MPLS paths offers more freedom compared to IP-based routing as it is not restricted by any shortest path constraints but any paths can be setup. However, this in general involves a higher configuration effort. Finally, in the third considered routing type, typically centralized routing using a Software Defined Networking (SDN) architecture, simple switches only forward packets according to routing decisions made by centralized controller units. SDN-based routing layouts offer the same freedom as for explicit paths configured using MPLS. In case of a failure, new rules can be setup by the controllers to continue the routing in the reduced topology. However, new resilience issues arise caused by the centralized architecture. If controllers are not reachable anymore, the forwarding rules in the single nodes cannot be adapted anymore. This might render a rerouting in case of connection problems in severe failure scenarios infeasible. N2 - Routing stellt eine der zentralen Aufgaben in Kommunikationsnetzen dar. Es bestimmt darüber, auf welchem Weg Verkehr von der Quelle zum Ziel transportiert wird. Durch geschicktes Routing kann dadurch eine Verteilung der Verkehrsflüsse zum Beispiel zur Lastverteilung erreicht werden. Da Fehler in Kommunikationsnetzen nicht vollständig verhindert werden können, muss Routing insbesondere ausfallsicher sein, d.h., im Falle von Fehlern im Netz muss das Routing weiterhin in der Lage sein, Pakete auf alternativen Pfaden zum Ziel zu transportieren. Es existieren verschiedene gängige Routingverfahren und Technologien, die sich hinsichtlich Ihrer Arbeitsweise, Ihrer Kontrollstrukturen und Ihrer Funktionalität in bestimmten Fehlerszenarien unterscheiden. Für diese verschiedenen Ansätze ergeben sich jeweils eigene Fragestellungen hinsichtlich der Konfiguration, der Optimierung und der Berücksichtigung von Ausfallsicherheit. Diese Doktorarbeit behandelt am Beispiel bestimmter Technologien einige konkrete Fragestellungen zur Analyse und Optimierung der Ausfallsicherheit. Sie liefert damit einen Beitrag zum besseren generellen Verständnis verschiedenartiger Routingansätze und deren unterschiedlichen Potentials für den Einsatz in zukünftigen Netzarchitekturen. Zuerst wird dezentrales Routing behandelt, basierend auf administrativen Linkgewichten und dem Prinzip der kürzesten Pfade, wie es beispielsweise in den Protokollen IS-IS und OSPF genutzt wird. Diese Routingverfahren beinhalteten automatische Rekonvergenz-Mechanismen um im Falle von Fehlern auf der verbleibenden Netzstruktur weiterhin einen Transport von Verkehr zu ermöglichen. Spezielle IP-Fast Reroute Mechanismen ermöglichen zudem eine schnelle Reaktion im Falle von Fehlern. Routing basierend auf Linkgewichten lässt sich nur indirekt durch die Wahl geeigneter Gewichte beeinflussen und optimieren. Die zweite in der Doktorarbeit behandelte Routingart ist MPLS-basiertes Routing, bei dem Labels für Pakete verwendet werden und Pakete anhand sogenannter vorkonfigurierter Label Switched Paths weitergeleitet werden. Diese Technologie bietet mehr Freiheiten bei der Wahl des Pfadlayouts, was aber wiederum im Allgemeinen einen erhöhten Konfigurationsaufwand mit sich bringt. Schließlich greift die Doktorarbeit auch das Routing in SDN Netzen auf. Dort erfolgt eine Trennung von Control Plane und Data Plane, so dass einzelne dedizierte Controller die Routingentscheidungen festlegen und ansonsten einfache Switches mit reduzierter Komplexität den Verkehr lediglich entsprechend der festgelegten Regeln weiterleiten. Dies ermöglicht die größte Freiheit bei der Konfiguration des Routing bringt aber wiederum neue Fragestellungen bedingt durch die zentralen Kontrolleinheiten mit sich. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/14 KW - Leistungsbewertung KW - Verteiltes System KW - Routing KW - Netzwerk KW - Optimization KW - Routing KW - Software Defined Networking KW - Optimierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-101681 SN - 1432-8801 ER - TY - JOUR A1 - Wolff, Alexander A1 - Rutter, Iganz T1 - Augmenting the Connectivity of Planar and Geometric Graphs JF - Journal of Graph Algorithms and Applications N2 - In this paper we study connectivity augmentation problems. Given a connected graph G with some desirable property, we want to make G 2-vertex connected (or 2-edge connected) by adding edges such that the resulting graph keeps the property. The aim is to add as few edges as possible. The property that we consider is planarity, both in an abstract graph-theoretic and in a geometric setting, where vertices correspond to points in the plane and edges to straight-line segments. We show that it is NP-hard to � nd a minimum-cardinality augmentation that makes a planar graph 2-edge connected. For making a planar graph 2-vertex connected this was known. We further show that both problems are hard in the geometric setting, even when restricted to trees. The problems remain hard for higher degrees of connectivity. On the other hand we give polynomial-time algorithms for the special case of convex geometric graphs. We also study the following related problem. Given a planar (plane geometric) graph G, two vertices s and t of G, and an integer c, how many edges have to be added to G such that G is still planar (plane geometric) and contains c edge- (or vertex-) disjoint s{t paths? For the planar case we give a linear-time algorithm for c = 2. For the plane geometric case we give optimal worst-case bounds for c = 2; for c = 3 we characterize the cases that have a solution. Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-97587 ER - TY - THES A1 - Driewer, Frauke T1 - Teleoperation Interfaces in Human-Robot Teams T1 - Benutzerschnittstellen für Teleoperation in Mensch-Roboter Teams N2 - Diese Arbeit beschäftigt sich mit der Verbesserung von Mensch-Roboter Interaktion in Mensch-Roboter Teams für Teleoperation Szenarien, wie z.B. robotergestützte Feuerwehreinsätze. Hierbei wird ein Konzept und eine Architektur für ein System zur Unterstützung von Teleoperation von Mensch-Roboter Teams vorgestellt. Die Anforderungen an Informationsaustausch und -verarbeitung, insbesondere für die Anwendung Rettungseinsatz, werden ausgearbeitet. Weiterhin wird das Design der Benutzerschnittstellen für Mensch-Roboter Teams dargestellt und Prinzipien für Teleoperation-Systeme und Benutzerschnittstellen erarbeitet. Alle Studien und Ansätze werden in einem Prototypen-System implementiert und in verschiedenen Benutzertests abgesichert. Erweiterungsmöglichkeiten zum Einbinden von 3D Sensordaten und die Darstellung auf Stereovisualisierungssystemen werden gezeigt. N2 - This work deals with teams in teleoperation scenarios, where one human team partner (supervisor) guides and controls multiple remote entities (either robotic or human) and coordinates their tasks. Such a team needs an appropriate infrastructure for sharing information and commands. The robots need to have a level of autonomy, which matches the assigned task. The humans in the team have to be provided with autonomous support, e.g. for information integration. Design and capabilities of the human-robot interfaces will strongly influence the performance of the team as well as the subjective feeling of the human team partners. Here, it is important to elaborate the information demand as well as how information is presented. Such human-robot systems need to allow the supervisor to gain an understanding of what is going on in the remote environment (situation awareness) by providing the necessary information. This includes achieving fast assessment of the robot´s or remote human´s state. Processing, integration and organization of data as well as suitable autonomous functions support decision making and task allocation and help to decrease the workload in this multi-entity teleoperation task. Interaction between humans and robots is improved by a common world model and a responsive system and robots. The remote human profits from a simplified user interface providing exactly the information needed for the actual task at hand. The topic of this thesis is the investigation of such teleoperation interfaces in human-robot teams, especially for high-risk, time-critical, and dangerous tasks. The aim is to provide a suitable human-robot team structure as well as analyze the demands on the user interfaces. On one side, it will be looked on the theoretical background (model, interactions, and information demand). On the other side, real implementations for system, robots, and user interfaces are presented and evaluated as testbeds for the claimed requirements. Rescue operations, more precisely fire-fighting, was chosen as an exemplary application scenario for this work. The challenges in such scenarios are high (highly dynamic environments, high risk, time criticality etc.) and it can be expected that results can be transferred to other applications, which have less strict requirements. The present work contributes to the introduction of human-robot teams in task-oriented scenarios, such as working in high risk domains, e.g. fire-fighting. It covers the theoretical background of the required system, the analysis of related human factors concepts, as well as discussions on implementation. An emphasis is placed on user interfaces, their design, requirements and user testing, as well as on the used techniques (three-dimensional sensor data representation, mixed reality, and user interface design guidelines). Further, the potential integration of 3D sensor data as well as the visualization on stereo visualization systems is introduced. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 1 KW - Robotik KW - Mobiler Roboter KW - Autonomer Roboter KW - Mensch-Maschine-System KW - Mensch-Maschine-Schnittstelle KW - Mixed Reality KW - Mensch-Roboter-Interaktion KW - Situationsbewusstsein KW - Teleoperation KW - Benutzerschnittstelle KW - Rettungsroboter KW - Human-Robot-Interaction KW - Situation Awareness KW - Teleoperation KW - User Interface KW - Search-and-Rescue Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-36351 SN - 978-3-923959-57-0 N1 - Zugl. gedruckte Ausgabe: ISBN: 978-3-923959-54-9 (Paper) ER - TY - THES A1 - Hess, Martin T1 - Motion coordination and control in systems of nonholonomic autonomous vehicles T1 - Bewegungskoordination und Regelung in Gruppen nichtholonomer autonomer Fahrzeuge N2 - This work focuses on coordination methods and the control of motion in groups of nonholonomic wheeled mobile robots, in particular of the car-like type. These kind of vehicles are particularly restricted in their mobility. In the main part of this work the two problems of formation motion coordination and of rendezvous in distributed multi-vehicle systems are considered. We introduce several enhancements to an existing motion planning approach for formations of nonholonomic mobile robots. Compared to the original method, the extended approach is able to handle time-varying reference speeds as well as adjustments of the formation's shape during reference trajectory segments with continuously differentiable curvature. Additionally, undesired discontinuities in the speed and steering profiles of the vehicles are avoided. Further, the scenario of snow shoveling on an airfield by utilizing multiple formations of autonomous snowplows is discussed. We propose solutions to the subproblems of motion planning for the formations and tracking control for the individual vehicles. While all situations that might occur have been tested in a simulation environment, we also verified the developed tracking controller in real robot hardware experiments. The task of the rendezvous problem in groups of car-like robots is to drive all vehicles to a common position by means of decentralized control laws. Typically there exists no direct interaction link between all of the vehicles. In this work we present decentralized rendezvous control laws for vehicles with free and with bounded steering. The convergence properties of the approaches are analyzed by utilizing Lyapunov based techniques. Furthermore, they are evaluated within various simulation experiments, while the bounded steering case is also verified within laboratory hardware experiments. Finally we introduce a modification to the bounded steering system that increases the convergence speed at the expense of a higher traveled distance of the vehicles. N2 - Diese Arbeit befasst sich mit Methoden zur Bewegungskoordination und Regelung in Gruppen autonomer, nichtholomer Fahrzeuge, wobei vornehmlich autoähnliche mobile Roboter betrachtet werden. Diese Fahrzeuge sind besonders eingeschränkt in ihrer Bewegungsfreiheit. Im Hauptteil der Arbeit werden die Probleme der Formationsbewegung und des Rendezvous in Gruppen verteilter Fahrzeuge betrachtet. Für ein bestehendes Verfahren zur Bewegungsplanung für Formationen nichtholonomer, mobiler Fahrzeuge werden eine Reihe von Verbesserungen vorgestellt. Diese ermöglichen dem erweiterten Verfahren den Umgang mit Referenztrajektorien mit nicht-konstanter Geschwindigkeit und stetig differenzierbarer Krümmung. Außerdem werden im Gegensatz zum ursprünglichen Ansatz unerwünschte Sprungstellen in den Geschwindigkeits- und Krümmungsprofilen der Fahrzeuge vermieden. Desweiteren wird in dieser Arbeit das Schneeräumen auf Flughafenrollfeldern mittels Formationen autonomer Schneepflugfahrzeuge diskutiert. Dabei werden Lösungen für die Teilprobleme Bewegungsplanung der Formationen und Spurführungsregelung der einzelnen Fahrzeuge vorgestellt. Zusätzlich zu den durchgeführten Simulationen werden außerdem die Ergebnisse von Hardwareexperimenten mit der entwickelten Spurführungsregelung präsentiert. Das Rendezvous-Problem in Gruppen autoähnlicher Roboter besteht darin, die Fahrzeuge durch dezentrale Regelgesetze zu einer gemeinsamen Position in der Ebene zu bewegen. Dabei besteht typischerweise keine direkte Interaktionsverbindung zwischen allen Fahrzeugen der Gruppe. In dieser Arbeit werden verteilte Rendezvous-Regelgesetze für Fahrzeuge mit unbeschränktem und mit beschränktem Lenkwinkel eingeführt und deren Konvergenzeigenschaften mit Methoden zur Stabilitätsanalyse nicht-linearer Systeme untersucht. Die vorgestellten Regelsysteme werden weiterhin anhand von Simulationen und Hardwareexperimenten verifiziert. Schließlich wird noch eine Erweiterung des Systems für Fahrzeuge mit beschränktem Lenkwinkel vorgestellt, welches die Konvergenzgeschwindigkeit auf Kosten der zurückgelegten Distanz der Fahrzeuge erhöht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 2 KW - Robotik KW - Autonomer Roboter KW - Mobiler Roboter KW - Bewegungskoordination KW - Dezentrale Regelung KW - Nichtlineare Regelung KW - Rendezvous KW - Kooperierende mobile Roboter KW - Formationsbewegung KW - Nichtholonome Fahrzeuge KW - Mehrfahrzeugsysteme KW - Unstetige Regelung KW - Autonomous multi-vehicle systems KW - multi-vehicle formations KW - multi-vehicle rendezvous KW - car-like robots KW - nonholonomic vehicles Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46442 SN - 978-3-923959-55-6 ER - TY - THES A1 - Kaempgen, Benedikt T1 - Deskriptives Data-Mining für Entscheidungsträger: Eine Mehrfachfallstudie T1 - Descriptive data mining for decision-makers: a multiple case study N2 - Das Potenzial der Wissensentdeckung in Daten wird häufig nicht ausgenutzt, was hauptsächlich auf Barrieren zwischen dem Entwicklerteam und dem Endnutzer des Data-Mining zurückzuführen ist. In dieser Arbeit wird ein transparenter Ansatz zum Beschreiben und Erklären von Daten für Entscheidungsträger vorgestellt. In Entscheidungsträger-zentrierten Aufgaben werden die Projektanforderungen definiert und die Ergebnisse zu einer Geschichte zusammengestellt. Eine Anforderung besteht dabei aus einem tabellarischen Bericht und ggf. Mustern in seinem Inhalt, jeweils verständlich für einen Entscheidungsträger. Die technischen Aufgaben bestehen aus einer Datenprüfung, der Integration der Daten in einem Data-Warehouse sowie dem Generieren von Berichten und dem Entdecken von Mustern wie in den Anforderungen beschrieben. Mehrere Data-Mining-Projekte können durch Wissensmanagement sowie eine geeignete Infrastruktur voneinander profitieren. Der Ansatz wurde in zwei Projekten unter Verwendung von ausschließlich Open-Source-Software angewendet. N2 - Despite high potential of data mining in business and science many projects fail due to barriers between the developer team and the end user. In this work a more transparent approach to describing and explaining data to a decision-maker is presented. In decision-maker-centric tasks project requirements are defined and finally the results composed to a story. A requirement is made of a tabular report and possibly patterns in its data, each understandable to a decision-maker. The technical tasks consist of a data assay, the integration of data within a data warehouse and, as required, the creation of reports and the discovery of patterns. Multiple data mining projects benefit from each other through knowledge management and a common infrastructure. The approach has been applied to two projects exclusively using open source systems. KW - Data Mining KW - Entscheidungsträger KW - Fallstudie KW - Methodologie KW - Endnutzer KW - Business Intelligence KW - Open Source KW - data mining KW - case study KW - process model KW - end user KW - open source Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46343 ER - TY - JOUR A1 - Schlör, Daniel A1 - Ring, Markus A1 - Hotho, Andreas T1 - iNALU: Improved Neural Arithmetic Logic Unit JF - Frontiers in Artificial Intelligence N2 - Neural networks have to capture mathematical relationships in order to learn various tasks. They approximate these relations implicitly and therefore often do not generalize well. The recently proposed Neural Arithmetic Logic Unit (NALU) is a novel neural architecture which is able to explicitly represent the mathematical relationships by the units of the network to learn operations such as summation, subtraction or multiplication. Although NALUs have been shown to perform well on various downstream tasks, an in-depth analysis reveals practical shortcomings by design, such as the inability to multiply or divide negative input values or training stability issues for deeper networks. We address these issues and propose an improved model architecture. We evaluate our model empirically in various settings from learning basic arithmetic operations to more complex functions. Our experiments indicate that our model solves stability issues and outperforms the original NALU model in means of arithmetic precision and convergence. KW - neural networks KW - machine learning KW - arithmetic calculations KW - neural architecture KW - experimental evaluation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-212301 SN - 2624-8212 VL - 3 ER - TY - RPRT A1 - Vomhoff, Viktoria A1 - Geissler, Stefan A1 - Gebert, Steffen A1 - Hossfeld, Tobias T1 - Towards Understanding the Global IPX Network from an MVNO Perspective T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In this paper, we work to understand the global IPX network from the perspective of an MVNO. In order to do this, we provide a brief description of the global architecture of mobile carriers. We provide initial results with respect to mapping the vast and complex interconnection network enabling global roaming from the point of view of a single MVNO. Finally, we provide preliminary results regarding the quality of service observed under global roaming conditions. KW - global IPX network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322121 ER - TY - JOUR A1 - Loh, Frank A1 - Poignée, Fabian A1 - Wamser, Florian A1 - Leidinger, Ferdinand A1 - Hoßfeld, Tobias T1 - Uplink vs. Downlink: Machine Learning-Based Quality Prediction for HTTP Adaptive Video Streaming JF - Sensors N2 - Streaming video is responsible for the bulk of Internet traffic these days. For this reason, Internet providers and network operators try to make predictions and assessments about the streaming quality for an end user. Current monitoring solutions are based on a variety of different machine learning approaches. The challenge for providers and operators nowadays is that existing approaches require large amounts of data. In this work, the most relevant quality of experience metrics, i.e., the initial playback delay, the video streaming quality, video quality changes, and video rebuffering events, are examined using a voluminous data set of more than 13,000 YouTube video streaming runs that were collected with the native YouTube mobile app. Three Machine Learning models are developed and compared to estimate playback behavior based on uplink request information. The main focus has been on developing a lightweight approach using as few features and as little data as possible, while maintaining state-of-the-art performance. KW - HTTP adaptive video streaming KW - quality of experience prediction KW - machine learning Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241121 SN - 1424-8220 VL - 21 IS - 12 ER - TY - CHAP A1 - Truman, Samuel A1 - von Mammen, Sebastian T1 - Interactive Self-Assembling Agent Ensembles T2 - Proceedings of the 1st Games Technology Summit N2 - In this paper, we bridge the gap between procedural content generation (PCG) and user-generated content (UGC) by proposing and demonstrating an interactive agent-based model of self-assembling ensembles that can be directed though user input. We motivate these efforts by considering the opportunities technology provides to pursue game designs based on according game design frameworks. We present three different use cases of the proposed model that emphasize its potential to (1) self-assemble into predefined 3D graphical assets, (2) define new structures in the context of virtual environments by self-assembling layers on the surfaces of arbitrary 3D objects, and (3) allow novel structures to self-assemble only considering the model’s configuration and no external dependencies. To address the performance restrictions in computer games, we realized the prototypical model implementation by means of an efficient entity component system (ECS). We conclude the paper with an outlook on future steps to further explore novel interactive, dynamic PCG mechanics and to ensure their efficiency. KW - procedural content generation KW - user-generated content KW - game mechanics KW - agent-based models KW - self-assembly Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246032 ER - TY - RPRT A1 - Navade, Piyush A1 - Maile, Lisa A1 - German, Reinhard T1 - Multiple DCLC Routing Algorithms for Ultra-Reliable and Time-Sensitive Applications T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper discusses the problem of finding multiple shortest disjoint paths in modern communication networks, which is essential for ultra-reliable and time-sensitive applications. Dijkstra’s algorithm has been a popular solution for the shortest path problem, but repetitive use of it to find multiple paths is not scalable. The Multiple Disjoint Path Algorithm (MDPAlg), published in 2021, proposes the use of a single full graph to construct multiple disjoint paths. This paper proposes modifications to the algorithm to include a delay constraint, which is important in time-sensitive applications. Different delay constraint least-cost routing algorithms are compared in a comprehensive manner to evaluate the benefits of the adapted MDPAlg algorithm. Fault tolerance, and thereby reliability, is ensured by generating multiple link-disjoint paths from source to destination. KW - Dijkstra’s algorithm KW - shortest path routing KW - disjoint multi-paths KW - delay constrained KW - least cost Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322177 ER - TY - JOUR A1 - Halbig, Andreas A1 - Latoschik, Marc Erich T1 - A systematic review of physiological measurements, factors, methods, and applications in virtual reality JF - Frontiers in Virtual Reality N2 - Measurements of physiological parameters provide an objective, often non-intrusive, and (at least semi-)automatic evaluation and utilization of user behavior. In addition, specific hardware devices of Virtual Reality (VR) often ship with built-in sensors, i.e. eye-tracking and movements sensors. Hence, the combination of physiological measurements and VR applications seems promising. Several approaches have investigated the applicability and benefits of this combination for various fields of applications. However, the range of possible application fields, coupled with potentially useful and beneficial physiological parameters, types of sensor, target variables and factors, and analysis approaches and techniques is manifold. This article provides a systematic overview and an extensive state-of-the-art review of the usage of physiological measurements in VR. We identified 1,119 works that make use of physiological measurements in VR. Within these, we identified 32 approaches that focus on the classification of characteristics of experience, common in VR applications. The first part of this review categorizes the 1,119 works by field of application, i.e. therapy, training, entertainment, and communication and interaction, as well as by the specific target factors and variables measured by the physiological parameters. An additional category summarizes general VR approaches applicable to all specific fields of application since they target typical VR qualities. In the second part of this review, we analyze the target factors and variables regarding the respective methods used for an automatic analysis and, potentially, classification. For example, we highlight which measurement setups have been proven to be sensitive enough to distinguish different levels of arousal, valence, anxiety, stress, or cognitive workload in the virtual realm. This work may prove useful for all researchers wanting to use physiological data in VR and who want to have a good overview of prior approaches taken, their benefits and potential drawbacks. KW - virtual reality KW - use cases KW - sesnsors KW - tools KW - biosignals KW - psychophyisology KW - HMD (Head-Mounted Display) KW - systematic review Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260503 VL - 2 ER - TY - JOUR A1 - Li, Ningbo A1 - Guan, Lianwu A1 - Gao, Yanbin A1 - Du, Shitong A1 - Wu, Menghao A1 - Guang, Xingxing A1 - Cong, Xiaodan T1 - Indoor and outdoor low-cost seamless integrated navigation system based on the integration of INS/GNSS/LIDAR system JF - Remote Sensing N2 - Global Navigation Satellite System (GNSS) provides accurate positioning data for vehicular navigation in open outdoor environment. In an indoor environment, Light Detection and Ranging (LIDAR) Simultaneous Localization and Mapping (SLAM) establishes a two-dimensional map and provides positioning data. However, LIDAR can only provide relative positioning data and it cannot directly provide the latitude and longitude of the current position. As a consequence, GNSS/Inertial Navigation System (INS) integrated navigation could be employed in outdoors, while the indoors part makes use of INS/LIDAR integrated navigation and the corresponding switching navigation will make the indoor and outdoor positioning consistent. In addition, when the vehicle enters the garage, the GNSS signal will be blurred for a while and then disappeared. Ambiguous GNSS satellite signals will lead to the continuous distortion or overall drift of the positioning trajectory in the indoor condition. Therefore, an INS/LIDAR seamless integrated navigation algorithm and a switching algorithm based on vehicle navigation system are designed. According to the experimental data, the positioning accuracy of the INS/LIDAR navigation algorithm in the simulated environmental experiment is 50% higher than that of the Dead Reckoning (DR) algorithm. Besides, the switching algorithm developed based on the INS/LIDAR integrated navigation algorithm can achieve 80% success rate in navigation mode switching. KW - vehicular navigation KW - GNSS/INS integrated navigation KW - INS/LIDAR integrated navigation KW - switching navigation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-216229 SN - 2072-4292 VL - 12 IS - 19 ER - TY - JOUR A1 - Lesch, Veronika A1 - König, Maximilian A1 - Kounev, Samuel A1 - Stein, Anthony A1 - Krupitzer, Christian T1 - Tackling the rich vehicle routing problem with nature-inspired algorithms JF - Applied Intelligence N2 - In the last decades, the classical Vehicle Routing Problem (VRP), i.e., assigning a set of orders to vehicles and planning their routes has been intensively researched. As only the assignment of order to vehicles and their routes is already an NP-complete problem, the application of these algorithms in practice often fails to take into account the constraints and restrictions that apply in real-world applications, the so called rich VRP (rVRP) and are limited to single aspects. In this work, we incorporate the main relevant real-world constraints and requirements. We propose a two-stage strategy and a Timeline algorithm for time windows and pause times, and apply a Genetic Algorithm (GA) and Ant Colony Optimization (ACO) individually to the problem to find optimal solutions. Our evaluation of eight different problem instances against four state-of-the-art algorithms shows that our approach handles all given constraints in a reasonable time. KW - logistics KW - rich vehicle routing problem KW - ant-colony optimization KW - genetic algorithm KW - real-world application Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-268942 SN - 1573-7497 VL - 52 ER - TY - RPRT A1 - Deutschmann, Jörg A1 - Hielscher, Kai-Steffen A1 - German, Reinhard T1 - Next-Generation Satellite Communication Networks T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This paper gives an overview of our recent activities in the field of satellite communication networks, including an introduction to geostationary satellite systems and Low Earth Orbit megaconstellations. To mitigate the high latencies of geostationary satellite networks, TCP-splitting Performance Enhancing Proxies are deployed. However, these cannot be applied in the case of encrypted transport headers as it is the case for VPNs or QUIC. We summarize performance evaluation results from multiple measurement campaigns. In a recently concluded project, multipath communication was used to combine the advantages of very heterogeneous communication paths: low data rate, low latency (e.g., DSL light) and high data rate, high latency (e.g., geostationary satellite). KW - Datennetz KW - satellite communication KW - Performance Enhancing Proxies KW - transport protocols KW - VPN KW - QUIC KW - multipath communication KW - hybrid access Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280732 ER - TY - JOUR A1 - Carolus, Astrid A1 - Wienrich, Carolin A1 - Törke, Anna A1 - Friedel, Tobias A1 - Schwietering, Christian A1 - Sperzel, Mareike T1 - ‘Alexa, I feel for you!’ Observers’ empathetic reactions towards a conversational agent JF - Frontiers in Computer Science N2 - Conversational agents and smart speakers have grown in popularity offering a variety of options for use, which are available through intuitive speech operation. In contrast to the standard dyad of a single user and a device, voice-controlled operations can be observed by further attendees resulting in new, more social usage scenarios. Referring to the concept of ‘media equation’ and to research on the idea of ‘computers as social actors,’ which describes the potential of technology to trigger emotional reactions in users, this paper asks for the capacity of smart speakers to elicit empathy in observers of interactions. In a 2 × 2 online experiment, 140 participants watched a video of a man talking to an Amazon Echo either rudely or neutrally (factor 1), addressing it as ‘Alexa’ or ‘Computer’ (factor 2). Controlling for participants’ trait empathy, the rude treatment results in participants’ significantly higher ratings of empathy with the device, compared to the neutral treatment. The form of address had no significant effect. Results were independent of the participants’ gender and usage experience indicating a rather universal effect, which confirms the basic idea of the media equation. Implications for users, developers and researchers were discussed in the light of (future) omnipresent voice-based technology interaction scenarios. KW - conversational agent KW - empathy KW - smart speaker KW - media equation KW - computers as social actors KW - human-computer interaction Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-258807 VL - 3 ER - TY - RPRT A1 - Riegler, Clemens A1 - Werner, Lennart A1 - Kayal, Hakan T1 - MAPLE: Marsian Autorotation Probe Lander Experiment N2 - The first step towards aerial planetary exploration has been made. Ingenuity shows extremely promising results, and new missions are already underway. Rotorcraft are capable of flight. This capability could be utilized to support the last stages of Entry, Descent, and Landing. Thus, mass and complexity could be scaled down. Autorotation is one method of descent. It describes unpowered descent and landing, typically performed by helicopters in case of an engine failure. MAPLE is suggested to test these procedures and understand autorotation on other planets. In this series of experiments, the Ingenuity helicopter is utilized. Ingenuity would autorotate a ”mid-air-landing” before continuing with normal flight. Ultimately, the collected data shall help to understand autorotation on Mars and its utilization for interplanetary exploration. T3 - Raumfahrttechnik und Extraterrestrik - 2 KW - autorotation KW - descent KW - Mars KW - rotorcraft KW - landing KW - aerospace Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-282390 ER - TY - JOUR A1 - Obremski, David A1 - Lugrin, Jean-Luc A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - Non-native speaker perception of Intelligent Virtual Agents in two languages: the impact of amount and type of grammatical mistakes JF - Journal on Multimodal User Interfaces N2 - Having a mixed-cultural membership becomes increasingly common in our modern society. It is thus beneficial in several ways to create Intelligent Virtual Agents (IVAs) that reflect a mixed-cultural background as well, e.g., for educational settings. For research with such IVAs, it is essential that they are classified as non-native by members of a target culture. In this paper, we focus on variations of IVAs’ speech to create the impression of non-native speakers that are identified as such by speakers of two different mother tongues. In particular, we investigate grammatical mistakes and identify thresholds beyond which the agents is clearly categorised as a non-native speaker. Therefore, we conducted two experiments: one for native speakers of German, and one for native speakers of English. Results of the German study indicate that beyond 10% of word order mistakes and 25% of infinitive mistakes German-speaking IVAs are perceived as non-native speakers. Results of the English study indicate that beyond 50% of omission mistakes and 50% of infinitive mistakes English-speaking IVAs are perceived as non-native speakers. We believe these thresholds constitute helpful guidelines for computational approaches of non-native speaker generation, simplifying research with IVAs in mixed-cultural settings. KW - mixed-cultural settings KW - Intelligent Virtual Agents KW - verbal behaviour Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269984 SN - 1783-8738 VL - 15 IS - 2 ER - TY - JOUR A1 - Reinhard, Sebastian A1 - Helmerich, Dominic A. A1 - Boras, Dominik A1 - Sauer, Markus A1 - Kollmannsberger, Philip T1 - ReCSAI: recursive compressed sensing artificial intelligence for confocal lifetime localization microscopy JF - BMC Bioinformatics N2 - Background Localization-based super-resolution microscopy resolves macromolecular structures down to a few nanometers by computationally reconstructing fluorescent emitter coordinates from diffraction-limited spots. The most commonly used algorithms are based on fitting parametric models of the point spread function (PSF) to a measured photon distribution. These algorithms make assumptions about the symmetry of the PSF and thus, do not work well with irregular, non-linear PSFs that occur for example in confocal lifetime imaging, where a laser is scanned across the sample. An alternative method for reconstructing sparse emitter sets from noisy, diffraction-limited images is compressed sensing, but due to its high computational cost it has not yet been widely adopted. Deep neural network fitters have recently emerged as a new competitive method for localization microscopy. They can learn to fit arbitrary PSFs, but require extensive simulated training data and do not generalize well. A method to efficiently fit the irregular PSFs from confocal lifetime localization microscopy combining the advantages of deep learning and compressed sensing would greatly improve the acquisition speed and throughput of this method. Results Here we introduce ReCSAI, a compressed sensing neural network to reconstruct localizations for confocal dSTORM, together with a simulation tool to generate training data. We implemented and compared different artificial network architectures, aiming to combine the advantages of compressed sensing and deep learning. We found that a U-Net with a recursive structure inspired by iterative compressed sensing showed the best results on realistic simulated datasets with noise, as well as on real experimentally measured confocal lifetime scanning data. Adding a trainable wavelet denoising layer as prior step further improved the reconstruction quality. Conclusions Our deep learning approach can reach a similar reconstruction accuracy for confocal dSTORM as frame binning with traditional fitting without requiring the acquisition of multiple frames. In addition, our work offers generic insights on the reconstruction of sparse measurements from noisy experimental data by combining compressed sensing and deep learning. We provide the trained networks, the code for network training and inference as well as the simulation tool as python code and Jupyter notebooks for easy reproducibility. KW - compressed sensing KW - AI KW - SMLM KW - FLIMbee KW - dSTORM Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-299768 VL - 23 IS - 1 ER - TY - RPRT A1 - Simon, Manuel A1 - Gallenmüller, Sebastian A1 - Carle, Georg T1 - Never Miss Twice - Add-On-Miss Table Updates in Software Data Planes T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - State Management at line rate is crucial for critical applications in next-generation networks. P4 is a language used in software-defined networking to program the data plane. The data plane can profit in many circumstances when it is allowed to manage its state without any detour over a controller. This work is based on a previous study by investigating the potential and performance of add-on-miss insertions of state by the data plane. The state keeping capabilities of P4 are limited regarding the amount of data and the update frequency. We follow the tentative specification of an upcoming portable-NIC-architecture and implement these changes into the software P4 target T4P4S. We show that insertions are possible with only a slight overhead compared to lookups and evaluate the influence of the rate of insertions on their latency. KW - SDN KW - state management KW - P4 KW - Add-on-Miss Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322071 ER - TY - RPRT A1 - Brisch, Fabian A1 - Kassler, Andreas A1 - Vestin, Jonathan A1 - Pieska, Marcus A1 - Amend, Markus T1 - Accelerating Transport Layer Multipath Packet Scheduling for 5G-ATSSS T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Utilizing multiple access networks such as 5G, 4G, and Wi-Fi simultaneously can lead to increased robustness, resiliency, and capacity for mobile users. However, transparently implementing packet distribution over multiple paths within the core of the network faces multiple challenges including scalability to a large number of customers, low latency, and high-capacity packet processing requirements. In this paper, we offload congestion-aware multipath packet scheduling to a smartNIC. However, such hardware acceleration faces multiple challenges due to programming language and platform limitations. We implement different multipath schedulers in P4 with different complexity in order to cope with dynamically changing path capacities. Using testbed measurements, we show that our CMon scheduler, which monitors path congestion in the data plane and dynamically adjusts scheduling weights for the different paths based on path state information, can process more than 3.5 Mpps packets 25 μs latency. KW - multipath packet scheduling KW - P4 KW - MP-DCCP KW - 5G KW - ATSSSS Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322052 ER - TY - RPRT A1 - Hasslinger, Gerhard A1 - Ntougias, Konstantinos A1 - Hasslinger, Frank A1 - Hohlfeld, Oliver T1 - Performance Analysis of Basic Web Caching Strategies (LFU, LRU, FIFO, ...) with Time-To-Live Data Validation T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Web caches often use a Time-to-live (TTL) limit to validate data consistency with web servers. We study the impact of TTL constraints on the hit ratio of basic strategies in caches of fixed size. We derive analytical results and confirm their accuracy in comparison to simulations. We propose a score-based caching method with awareness of the current TTL per data for improving the hit ratio close to the upper bound. KW - LRU KW - LFU KW - FIFO caching strategies KW - hit ratio analysis and simulation KW - TTL validation of data consistency Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322048 ER - TY - RPRT A1 - Funda, Christoph A1 - Marín García, Pablo A1 - German, Reinhard A1 - Hielscher, Kai-Steffen T1 - Online Algorithm for Arrival & Service Curve Estimation T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper presents a novel concept to extend state-of-the-art buffer monitoring with additional measures to estimate service-curves. The online algorithm for service-curve estimation replaces the state-of-the-art timestamp logging, as we expect it to overcome the main disadvantages of generating a huge amount of data and using a lot of CPU resources to store the data to a file during operation. We prove the accuracy of the online-algorithm offline with timestamp data and compare the derived bounds to the measured delay and backlog. We also do a proof-of- concept of the online-algorithm, implement it in LabVIEW and compare its performance to the timestamp logging by CPU load and data-size of the log-file. However, the implementation is still work-in-progress. KW - hardware-in-the-loop streaming system KW - network calculus KW - service-curve estimation KW - performance monitoring Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322112 ER - TY - RPRT A1 - Mazigh, Sadok Mehdi A1 - Beausencourt, Marcel A1 - Bode, Max Julius A1 - Scheffler, Thomas T1 - Using P4-INT on Tofino for Measuring Device Performance Characteristics in a Network Lab T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper presents a prototypical implementation of the In-band Network Telemetry (INT) specification in P4 and demonstrates a use case, where a Tofino Switch is used to measure device and network performance in a lab setting. This work is based on research activities in the area of P4 data plane programming conducted at the network lab of HTW Berlin. KW - P4-INT Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322084 ER - TY - RPRT A1 - Nguyen, Kien A1 - Loh, Frank A1 - Hoßfeld, Tobias T1 - Challenges of Serverless Deployment in Edge-MEC-Cloud T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The emerging serverless computing may meet Edge Cloud in a beneficial manner as the two offer flexibility and dynamicity in optimizing finite hardware resources. However, the lack of proper study of a joint platform leaves a gap in literature about consumption and performance of such integration. To this end, this paper identifies the key questions and proposes a methodology to answer them. KW - Edge-MEC-Cloud Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322025 ER - TY - RPRT A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Towards Understanding the Signaling Traffic in 5G Core Networks T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The Fifth Generation (5G) communication technology, its infrastructure and architecture, though already deployed in campus and small scale networks, is still undergoing continuous changes and research. Especially, in the light of future large scale deployments and industrial use cases, a detailed analysis of the performance and utilization with regard to latency and service times constraints is crucial. To this end, a fine granular investigation of the Network Function (NF) based core system and the duration for all the tasks performed by these services is necessary. This work presents the first steps towards analyzing the signaling traffic in 5G core networks, and introduces a tool to automatically extract sequence diagrams and service times for NF tasks from traffic traces. KW - signaling traffic KW - 5G core network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322106 ER - TY - RPRT A1 - Großmann, Marcel A1 - Homeyer, Tobias T1 - Emulation of Multipath Transmissions in P4 Networks with Kathará T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Packets sent over a network can either get lost or reach their destination. Protocols like TCP try to solve this problem by resending the lost packets. However, retransmissions consume a lot of time and are cumbersome for the transmission of critical data. Multipath solutions are quite common to address this reliability issue and are available on almost every layer of the ISO/OSI model. We propose a solution based on a P4 network to duplicate packets in order to send them to their destination via multiple routes. The last network hop ensures that only a single copy of the traffic is further forwarded to its destination by adopting a concept similar to Bloom filters. Besides, if fast delivery is requested we provide a P4 prototype, which randomly forwards the packets over different transmission paths. For reproducibility, we implement our approach in a container-based network emulation system called Kathará. KW - P4 KW - multipath KW - emulation KW - Kathará Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322095 ER - TY - RPRT A1 - Riegler, Clemens A1 - Kayal, Hakan T1 - VELEX: Venus Lightning Experiment N2 - Lightning has fascinated humanity since the beginning of our existence. Different types of lightning like sprites and blue jets were discovered, and many more are theorized. However, it is very likely that these phenomena are not exclusive to our home planet. Venus’s dense and active atmosphere is a place where lightning is to be expected. Missions like Venera, Pioneer, and Galileo have carried instruments to measure electromagnetic activity. These measurements have indeed delivered results. However, these results are not clear. They could be explained by other effects like cosmic rays, plasma noise, or spacecraft noise. Furthermore, these lightning seem different from those we know from our home planet. In order to tackle these issues, a different approach to measurement is proposed. When multiple devices in different spacecraft or locations can measure the same atmospheric discharge, most other explanations become increasingly less likely. Thus, the suggested instrument and method of VELEX incorporates multiple spacecraft. With this approach, the question about the existence of lightning on Venus could be settled. T3 - Raumfahrttechnik und Extraterrestrik - 3 KW - Venus KW - Lightning KW - CubeSat KW - Balloon KW - Autorotation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-282481 ER - TY - JOUR A1 - Wamser, Florian A1 - Seufert, Anika A1 - Hall, Andrew A1 - Wunderer, Stefan A1 - Hoßfeld, Tobias T1 - Valid statements by the crowd: statistical measures for precision in crowdsourced mobile measurements JF - Network N2 - Crowdsourced network measurements (CNMs) are becoming increasingly popular as they assess the performance of a mobile network from the end user's perspective on a large scale. Here, network measurements are performed directly on the end-users' devices, thus taking advantage of the real-world conditions end-users encounter. However, this type of uncontrolled measurement raises questions about its validity and reliability. The problem lies in the nature of this type of data collection. In CNMs, mobile network subscribers are involved to a large extent in the measurement process, and collect data themselves for the operator. The collection of data on user devices in arbitrary locations and at uncontrolled times requires means to ensure validity and reliability. To address this issue, our paper defines concepts and guidelines for analyzing the precision of CNMs; specifically, the number of measurements required to make valid statements. In addition to the formal definition of the aspect, we illustrate the problem and use an extensive sample data set to show possible assessment approaches. This data set consists of more than 20.4 million crowdsourced mobile measurements from across France, measured by a commercial data provider. KW - mobile networks KW - crowdsourced measurements KW - statistical validity Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-284154 SN - 2673-8732 VL - 1 IS - 2 SP - 215 EP - 232 ER - TY - RPRT A1 - Grigorjew, Alexej A1 - Schumann, Lukas Kilian A1 - Diederich, Philip A1 - Hoßfeld, Tobias A1 - Kellerer, Wolfgang T1 - Understanding the Performance of Different Packet Reception and Timestamping Methods in Linux T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This document briefly presents some renowned packet reception techniques for network packets in Linux systems. Further, it compares their performance when measuring packet timestamps with respect to throughput and accuracy. Both software and hardware timestamps are compared, and various parameters are examined, including frame size, link speed, network interface card, and CPU load. The results indicate that hardware timestamping offers significantly better accuracy with no downsides, and that packet reception techniques that avoid system calls offer superior measurement throughput. KW - packet reception method KW - timestamping method KW - Linux Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322064 ER - TY - THES A1 - Somody, Joseph Christian Campbell T1 - Leveraging deep learning for identification and structural determination of novel protein complexes from \(in\) \(situ\) electron cryotomography of \(Mycoplasma\) \(pneumoniae\) T1 - Tiefenlernen als Werkzeug zur Identifizierung und Strukturbestimmung neuer Proteinkomplexe aus der \(in\)-\(situ\)-Elektronenkryotomographie von \(Mycoplasma\) \(pneumoniae\) N2 - The holy grail of structural biology is to study a protein in situ, and this goal has been fast approaching since the resolution revolution and the achievement of atomic resolution. A cell's interior is not a dilute environment, and proteins have evolved to fold and function as needed in that environment; as such, an investigation of a cellular component should ideally include the full complexity of the cellular environment. Imaging whole cells in three dimensions using electron cryotomography is the best method to accomplish this goal, but it comes with a limitation on sample thickness and produces noisy data unamenable to direct analysis. This thesis establishes a novel workflow to systematically analyse whole-cell electron cryotomography data in three dimensions and to find and identify instances of protein complexes in the data to set up a determination of their structure and identity for success. Mycoplasma pneumoniae is a very small parasitic bacterium with fewer than 700 protein-coding genes, is thin enough and small enough to be imaged in large quantities by electron cryotomography, and can grow directly on the grids used for imaging, making it ideal for exploratory studies in structural proteomics. As part of the workflow, a methodology for training deep-learning-based particle-picking models is established. As a proof of principle, a dataset of whole-cell Mycoplasma pneumoniae tomograms is used with this workflow to characterize a novel membrane-associated complex observed in the data. Ultimately, 25431 such particles are picked from 353 tomograms and refined to a density map with a resolution of 11 Å. Making good use of orthogonal datasets to filter search space and verify results, structures were predicted for candidate proteins and checked for suitable fit in the density map. In the end, with this approach, nine proteins were found to be part of the complex, which appears to be associated with chaperone activity and interact with translocon machinery. Visual proteomics refers to the ultimate potential of in situ electron cryotomography: the comprehensive interpretation of tomograms. The workflow presented here is demonstrated to help in reaching that potential. N2 - Der heilige Gral der Strukturbiologie ist die Untersuchung eines Proteins in situ, und dieses Ziel ist seit der Auflösungsrevolution und dem Erreichen der atomaren Auflösung in greifbare Nähe gerückt. Das Innere einer Zelle ist keine verdünnte Umgebung, und Proteine haben sich so entwickelt, dass sie sich falten und so funktionieren, wie es in dieser Umgebung erforderlich ist; daher sollte die Untersuchung einer zellulären Komponente idealerweise die gesamte Komplexität der zellulären Umgebung umfassen. Die Abbildung ganzer Zellen in drei Dimensionen mit Hilfe der Elektronenkryotomographie ist die beste Methode, um dieses Ziel zu erreichen, aber sie ist mit einer Beschränkung der Probendicke verbunden und erzeugt verrauschte Daten, die sich nicht für eine direkte Analyse eignen. In dieser Dissertation wird ein neuartiger Workflow zur systematischen dreidimensionalen Analyse von Ganzzell-Elektronenkryotomographiedaten und zur Auffindung und Identifizierung von Proteinkomplexen in diesen Daten entwickelt, um eine erfolgreiche Bestimmung ihrer Struktur und Identität zu ermöglichen. Mycoplasma pneumoniae ist ein sehr kleines parasitäres Bakterium mit weniger als 700 proteinkodierenden Genen. Es ist dünn und klein genug, um in grossen Mengen durch Elektronenkryotomographie abgebildet zu werden, und kann direkt auf den für die Abbildung verwendeten Gittern wachsen, was es ideal für Sondierungsstudien in der strukturellen Proteomik macht. Als Teil des Workflows wird eine Methodik für das Training von Deep-Learning-basierten Partikelpicken-Modellen entwickelt. Als Proof-of-Principle wird ein Dataset von Ganzzell-Tomogrammen von Mycoplasma pneumoniae mit diesem Workflow verwendet, um einen neuartigen membranassoziierten Komplex zu charakterisieren, der in den Daten beobachtet wurde. Insgesamt wurden 25431 solcher Partikel aus 353 Tomogrammen gepickt und zu einer Dichtekarte mit einer Auflösung von 11 Å verfeinert. Unter Verwendung orthogonaler Datensätze zur Filterung des Suchraums und zur Überprüfung der Ergebnisse wurden Strukturen für Protein-Kandidaten vorhergesagt und auf ihre Eignung für die Dichtekarte überprüft. Letztendlich wurden mit diesem Ansatz neun Proteine als Bestandteile des Komplexes gefunden, der offenbar mit der Chaperonaktivität in Verbindung steht und mit der Translocon-Maschinerie interagiert. Das ultimative Potenzial der In-situ-Elektronenkryotomographie – die umfassende Interpretation von Tomogrammen – wird als visuelle Proteomik bezeichnet. Der hier vorgestellte Workflow soll dabei helfen, dieses Potenzial auszuschöpfen. KW - Kryoelektronenmikroskopie KW - Tomografie KW - Mycoplasma pneumoniae KW - Deep learning KW - cryo-EM KW - cryo-ET KW - tomography KW - mycoplasma KW - pneumoniae KW - deep learning KW - particle picking KW - membrane protein KW - visual proteomics Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313447 ER - TY - RPRT A1 - Elsayed, Karim A1 - Rizk, Amr T1 - Response Times in Time-to-Live Caching Hierarchies under Random Network Delays T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Time-to-Live (TTL) caches decouple the occupancy of objects in cache through object-specific validity timers. Stateof- the art techniques provide exact methods for the calculation of object-specific hit probabilities given entire cache hierarchies with random inter-cache network delays. The system hit probability is a provider-centric metric as it relates to the origin offload, i.e., the decrease in the number of requests that are served by the content origin server. In this paper we consider a user-centric metric, i.e., the response time, which is shown to be structurally different from the system hit probability. Equipped with the state-of-theart exact modeling technique using Markov-arrival processes we derive expressions for the expected object response time and pave a way for its optimization under network delays. KW - Datennetz KW - TTL Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280843 ER - TY - RPRT A1 - Alfredsson, Rebecka A1 - Kassler, Andreas A1 - Vestin, Jonathan A1 - Pieska, Marcus A1 - Amend, Markus T1 - Accelerating a Transport Layer based 5G Multi-Access Proxy on SmartNIC T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Utilizing multiple access technologies such as 5G, 4G, and Wi-Fi within a coherent framework is currently standardized by 3GPP within 5G ATSSS. Indeed, distributing packets over multiple networks can lead to increased robustness, resiliency and capacity. A key part of such a framework is the multi-access proxy, which transparently distributes packets over multiple paths. As the proxy needs to serve thousands of customers, scalability and performance are crucial for operator deployments. In this paper, we leverage recent advancements in data plane programming, implement a multi-access proxy based on the MP-DCCP tunneling approach in P4 and hardware accelerate it by deploying the pipeline on a smartNIC. This is challenging due to the complex scheduling and congestion control operations involved. We present our pipeline and data structures design for congestion control and packet scheduling state management. Initial measurements in our testbed show that packet latency is in the range of 25 μs demonstrating the feasibility of our approach. KW - Datennetz KW - multipath KW - MP-DCCP KW - 5G-ATSSS KW - networking KW - dataplane programming KW - P4 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280798 ER - TY - JOUR A1 - Bencurova, Elena A1 - Shityakov, Sergey A1 - Schaack, Dominik A1 - Kaltdorf, Martin A1 - Sarukhanyan, Edita A1 - Hilgarth, Alexander A1 - Rath, Christin A1 - Montenegro, Sergio A1 - Roth, Günter A1 - Lopez, Daniel A1 - Dandekar, Thomas T1 - Nanocellulose composites as smart devices with chassis, light-directed DNA Storage, engineered electronic properties, and chip integration JF - Frontiers in Bioengineering and Biotechnology N2 - The rapid development of green and sustainable materials opens up new possibilities in the field of applied research. Such materials include nanocellulose composites that can integrate many components into composites and provide a good chassis for smart devices. In our study, we evaluate four approaches for turning a nanocellulose composite into an information storage or processing device: 1) nanocellulose can be a suitable carrier material and protect information stored in DNA. 2) Nucleotide-processing enzymes (polymerase and exonuclease) can be controlled by light after fusing them with light-gating domains; nucleotide substrate specificity can be changed by mutation or pH change (read-in and read-out of the information). 3) Semiconductors and electronic capabilities can be achieved: we show that nanocellulose is rendered electronic by iodine treatment replacing silicon including microstructures. Nanocellulose semiconductor properties are measured, and the resulting potential including single-electron transistors (SET) and their properties are modeled. Electric current can also be transported by DNA through G-quadruplex DNA molecules; these as well as classical silicon semiconductors can easily be integrated into the nanocellulose composite. 4) To elaborate upon miniaturization and integration for a smart nanocellulose chip device, we demonstrate pH-sensitive dyes in nanocellulose, nanopore creation, and kinase micropatterning on bacterial membranes as well as digital PCR micro-wells. Future application potential includes nano-3D printing and fast molecular processors (e.g., SETs) integrated with DNA storage and conventional electronics. This would also lead to environment-friendly nanocellulose chips for information processing as well as smart nanocellulose composites for biomedical applications and nano-factories. KW - nanocellulose KW - DNA storage KW - light-gated proteins KW - single-electron transistors KW - protein chip Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-283033 SN - 2296-4185 VL - 10 ER - TY - JOUR A1 - Krenzer, Adrian A1 - Makowski, Kevin A1 - Hekalo, Amar A1 - Fitting, Daniel A1 - Troya, Joel A1 - Zoller, Wolfram G. A1 - Hann, Alexander A1 - Puppe, Frank T1 - Fast machine learning annotation in the medical domain: a semi-automated video annotation tool for gastroenterologists JF - BioMedical Engineering OnLine N2 - Background Machine learning, especially deep learning, is becoming more and more relevant in research and development in the medical domain. For all the supervised deep learning applications, data is the most critical factor in securing successful implementation and sustaining the progress of the machine learning model. Especially gastroenterological data, which often involves endoscopic videos, are cumbersome to annotate. Domain experts are needed to interpret and annotate the videos. To support those domain experts, we generated a framework. With this framework, instead of annotating every frame in the video sequence, experts are just performing key annotations at the beginning and the end of sequences with pathologies, e.g., visible polyps. Subsequently, non-expert annotators supported by machine learning add the missing annotations for the frames in-between. Methods In our framework, an expert reviews the video and annotates a few video frames to verify the object’s annotations for the non-expert. In a second step, a non-expert has visual confirmation of the given object and can annotate all following and preceding frames with AI assistance. After the expert has finished, relevant frames will be selected and passed on to an AI model. This information allows the AI model to detect and mark the desired object on all following and preceding frames with an annotation. Therefore, the non-expert can adjust and modify the AI predictions and export the results, which can then be used to train the AI model. Results Using this framework, we were able to reduce workload of domain experts on average by a factor of 20 on our data. This is primarily due to the structure of the framework, which is designed to minimize the workload of the domain expert. Pairing this framework with a state-of-the-art semi-automated AI model enhances the annotation speed further. Through a prospective study with 10 participants, we show that semi-automated annotation using our tool doubles the annotation speed of non-expert annotators compared to a well-known state-of-the-art annotation tool. Conclusion In summary, we introduce a framework for fast expert annotation for gastroenterologists, which reduces the workload of the domain expert considerably while maintaining a very high annotation quality. The framework incorporates a semi-automated annotation system utilizing trained object detection models. The software and framework are open-source. KW - object detection KW - machine learning KW - deep learning KW - annotation KW - endoscopy KW - gastroenterology KW - automation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300231 VL - 21 IS - 1 ER - TY - JOUR A1 - Kaltdorf, Kristin Verena A1 - Schulze, Katja A1 - Helmprobst, Frederik A1 - Kollmannsberger, Philip A1 - Dandekar, Thomas A1 - Stigloher, Christian T1 - Fiji macro 3D ART VeSElecT: 3D automated reconstruction tool for vesicle structures of electron tomograms JF - PLoS Computational Biology N2 - Automatic image reconstruction is critical to cope with steadily increasing data from advanced microscopy. We describe here the Fiji macro 3D ART VeSElecT which we developed to study synaptic vesicles in electron tomograms. We apply this tool to quantify vesicle properties (i) in embryonic Danio rerio 4 and 8 days past fertilization (dpf) and (ii) to compare Caenorhabditis elegans N2 neuromuscular junctions (NMJ) wild-type and its septin mutant (unc-59(e261)). We demonstrate development-specific and mutant-specific changes in synaptic vesicle pools in both models. We confirm the functionality of our macro by applying our 3D ART VeSElecT on zebrafish NMJ showing smaller vesicles in 8 dpf embryos then 4 dpf, which was validated by manual reconstruction of the vesicle pool. Furthermore, we analyze the impact of C. elegans septin mutant unc-59(e261) on vesicle pool formation and vesicle size. Automated vesicle registration and characterization was implemented in Fiji as two macros (registration and measurement). This flexible arrangement allows in particular reducing false positives by an optional manual revision step. Preprocessing and contrast enhancement work on image-stacks of 1nm/pixel in x and y direction. Semi-automated cell selection was integrated. 3D ART VeSElecT removes interfering components, detects vesicles by 3D segmentation and calculates vesicle volume and diameter (spherical approximation, inner/outer diameter). Results are collected in color using the RoiManager plugin including the possibility of manual removal of non-matching confounder vesicles. Detailed evaluation considered performance (detected vesicles) and specificity (true vesicles) as well as precision and recall. We furthermore show gain in segmentation and morphological filtering compared to learning based methods and a large time gain compared to manual segmentation. 3D ART VeSElecT shows small error rates and its speed gain can be up to 68 times faster in comparison to manual annotation. Both automatic and semi-automatic modes are explained including a tutorial. KW - Biology KW - Vesicles KW - Caenorhabditis elegans KW - Zebrafish KW - Septins KW - Synaptic vesicles KW - Neuromuscular junctions KW - Computer software KW - Synapses Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-172112 VL - 13 IS - 1 ER - TY - RPRT A1 - Martino, Luigi A1 - Deutschmann, Jörg A1 - Hielscher, Kai-Steffen A1 - German, Reinhard T1 - Towards a 5G Satellite Communication Framework for V2X T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In recent years, satellite communication has been expanding its field of application in the world of computer networks. This paper aims to provide an overview of how a typical scenario involving 5G Non-Terrestrial Networks (NTNs) for vehicle to everything (V2X) applications is characterized. In particular, a first implementation of a system that integrates them together will be described. Such a framework will later be used to evaluate the performance of applications such as Vehicle Monitoring (VM), Remote Driving (RD), Voice Over IP (VoIP), and others. Different configuration scenarios such as Low Earth Orbit and Geostationary Orbit will be considered. KW - 5G KW - non-terrestrial networks KW - satellite communication Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322148 ER - TY - RPRT A1 - Rauber, Christof A. O. A1 - Brechtel, Lukas A1 - Schotten, Hans D. T1 - JCAS-Enabled Sensing as a Service in 6th-Generation Mobile Communication Networks T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The introduction of new types of frequency spectrum in 6G technology facilitates the convergence of conventional mobile communications and radar functions. Thus, the mobile network itself becomes a versatile sensor system. This enables mobile network operators to offer a sensing service in addition to conventional data and telephony services. The potential benefits are expected to accrue to various stakeholders, including individuals, the environment, and society in general. The paper discusses technological development, possible integration, and use cases, as well as future development areas. KW - Sensing-aaS KW - JCAS KW - 6G Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322135 ER - TY - RPRT A1 - Loh, Frank A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Paving the Way for an Energy Efficient and Sustainable Future Internet of Things T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In this work, we describe the network from data collection to data processing and storage as a system based on different layers. We outline the different layers and highlight major tasks and dependencies with regard to energy consumption and energy efficiency. With this view, we can outwork challenges and questions a future system architect must answer to provide a more sustainable, green, resource friendly, and energy efficient application or system. Therefore, all system layers must be considered individually but also altogether for future IoT solutions. This requires, in particular, novel sustainability metrics in addition to current Quality of Service and Quality of Experience metrics to provide a high power, user satisfying, and sustainable network. KW - Internet of Things KW - energy efficiency KW - sustainability Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322161 ER - TY - RPRT A1 - Funda, Christoph A1 - Konheiser, Tobias A1 - German, Reinhard A1 - Hielscher, Kai-Steffen T1 - How to Model and Predict the Scalability of a Hardware-In-The-Loop Test Bench for Data Re-Injection? T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper describes a novel application of an empirical network calculus model based on measurements of a hardware-in-the-loop (HIL) test system. The aim is to predict the performance of a HIL test bench for open-loop re-injection in the context of scalability. HIL test benches are distributed computer systems including software, hardware, and networking devices. They are used to validate complex technical systems, but have not yet been system under study themselves. Our approach is to use measurements from the HIL system to create an empirical model for arrival and service curves. We predict the performance and design the previously unknown parameters of the HIL simulator with network calculus (NC), namely the buffer sizes and the minimum needed pre-buffer time for the playback buffer. We furthermore show, that it is possible to estimate the CPU load from arrival and service-curves based on the utilization theorem, and hence estimate the scalability of the HIL system in the context of the number of sensor streams. KW - hardware-in-the-loop simulation KW - computer performance evaluation KW - network calculus KW - scalability evaluation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322150 ER - TY - JOUR A1 - Steininger, Michael A1 - Abel, Daniel A1 - Ziegler, Katrin A1 - Krause, Anna A1 - Paeth, Heiko A1 - Hotho, Andreas T1 - ConvMOS: climate model output statistics with deep learning JF - Data Mining and Knowledge Discovery N2 - Climate models are the tool of choice for scientists researching climate change. Like all models they suffer from errors, particularly systematic and location-specific representation errors. One way to reduce these errors is model output statistics (MOS) where the model output is fitted to observational data with machine learning. In this work, we assess the use of convolutional Deep Learning climate MOS approaches and present the ConvMOS architecture which is specifically designed based on the observation that there are systematic and location-specific errors in the precipitation estimates of climate models. We apply ConvMOS models to the simulated precipitation of the regional climate model REMO, showing that a combination of per-location model parameters for reducing location-specific errors and global model parameters for reducing systematic errors is indeed beneficial for MOS performance. We find that ConvMOS models can reduce errors considerably and perform significantly better than three commonly used MOS approaches and plain ResNet and U-Net models in most cases. Our results show that non-linear MOS models underestimate the number of extreme precipitation events, which we alleviate by training models specialized towards extreme precipitation events with the imbalanced regression method DenseLoss. While we consider climate MOS, we argue that aspects of ConvMOS may also be beneficial in other domains with geospatial data, such as air pollution modeling or weather forecasts. KW - Klima KW - Modell KW - Deep learning KW - Neuronales Netz KW - climate KW - neural networks KW - model output statistics Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324213 SN - 1384-5810 VL - 37 IS - 1 ER - TY - JOUR A1 - Puppe, Frank T1 - Gesellschaftliche Perspektiven einer fachspezifischen KI für automatisierte Entscheidungen JF - Informatik Spektrum N2 - Die künstliche Intelligenz (KI) entwickelt sich rasant und hat bereits eindrucksvolle Erfolge zu verzeichnen, darunter übermenschliche Kompetenz in den meisten Spielen und vielen Quizshows, intelligente Suchmaschinen, individualisierte Werbung, Spracherkennung, -ausgabe und -übersetzung auf sehr hohem Niveau und hervorragende Leistungen bei der Bildverarbeitung, u. a. in der Medizin, der optischen Zeichenerkennung, beim autonomen Fahren, aber auch beim Erkennen von Menschen auf Bildern und Videos oder bei Deep Fakes für Fotos und Videos. Es ist zu erwarten, dass die KI auch in der Entscheidungsfindung Menschen übertreffen wird; ein alter Traum der Expertensysteme, der durch Lernverfahren, Big Data und Zugang zu dem gesammelten Wissen im Web in greifbare Nähe rückt. Gegenstand dieses Beitrags sind aber weniger die technischen Entwicklungen, sondern mögliche gesellschaftliche Auswirkungen einer spezialisierten, kompetenten KI für verschiedene Bereiche der autonomen, d. h. nicht nur unterstützenden Entscheidungsfindung: als Fußballschiedsrichter, in der Medizin, für richterliche Entscheidungen und sehr spekulativ auch im politischen Bereich. Dabei werden Vor- und Nachteile dieser Szenarien aus gesellschaftlicher Sicht diskutiert. KW - Künstliche Intelligenz KW - Ethik KW - Entscheidungsfindung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324197 SN - 0170-6012 VL - 45 IS - 2 ER - TY - JOUR A1 - Riedmann, Anna A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - Integration of a social robot and gamification in adult learning and effects on motivation, engagement and performance JF - AI & Society N2 - Learning is a central component of human life and essential for personal development. Therefore, utilizing new technologies in the learning context and exploring their combined potential are considered essential to support self-directed learning in a digital age. A learning environment can be expanded by various technical and content-related aspects. Gamification in the form of elements from video games offers a potential concept to support the learning process. This can be supplemented by technology-supported learning. While the use of tablets is already widespread in the learning context, the integration of a social robot can provide new perspectives on the learning process. However, simply adding new technologies such as social robots or gamification to existing systems may not automatically result in a better learning environment. In the present study, game elements as well as a social robot were integrated separately and conjointly into a learning environment for basic Spanish skills, with a follow-up on retained knowledge. This allowed us to investigate the respective and combined effects of both expansions on motivation, engagement and learning effect. This approach should provide insights into the integration of both additions in an adult learning context. We found that the additions of game elements and the robot did not significantly improve learning, engagement or motivation. Based on these results and a literature review, we outline relevant factors for meaningful integration of gamification and social robots in learning environments in adult learning. KW - social robot KW - gamification KW - technology-supported learning KW - adult learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324208 SN - 0951-5666 ER - TY - JOUR A1 - Kempf, Sebastian A1 - Krug, Markus A1 - Puppe, Frank T1 - KIETA: Key-insight extraction from scientific tables JF - Applied Intelligence N2 - An important but very time consuming part of the research process is literature review. An already large and nevertheless growing ground set of publications as well as a steadily increasing publication rate continue to worsen the situation. Consequently, automating this task as far as possible is desirable. Experimental results of systems are key-insights of high importance during literature review and usually represented in form of tables. Our pipeline KIETA exploits these tables to contribute to the endeavor of automation by extracting them and their contained knowledge from scientific publications. The pipeline is split into multiple steps to guarantee modularity as well as analyzability, and agnosticim regarding the specific scientific domain up until the knowledge extraction step, which is based upon an ontology. Additionally, a dataset of corresponding articles has been manually annotated with information regarding table and knowledge extraction. Experiments show promising results that signal the possibility of an automated system, while also indicating limits of extracting knowledge from tables without any context. KW - table extraction KW - table understanding KW - ontology KW - key-insight extraction KW - information extraction Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324180 SN - 0924-669X VL - 53 IS - 8 ER - TY - JOUR A1 - Maiwald, Ferdinand A1 - Bruschke, Jonas A1 - Schneider, Danilo A1 - Wacker, Markus A1 - Niebling, Florian T1 - Giving historical photographs a new perspective: introducing camera orientation parameters as new metadata in a large-scale 4D application JF - Remote Sensing N2 - The ongoing digitization of historical photographs in archives allows investigating the quality, quantity, and distribution of these images. However, the exact interior and exterior camera orientations of these photographs are usually lost during the digitization process. The proposed method uses content-based image retrieval (CBIR) to filter exterior images of single buildings in combination with metadata information. The retrieved photographs are automatically processed in an adapted structure-from-motion (SfM) pipeline to determine the camera parameters. In an interactive georeferencing process, the calculated camera positions are transferred into a global coordinate system. As all image and camera data are efficiently stored in the proposed 4D database, they can be conveniently accessed afterward to georeference newly digitized images by using photogrammetric triangulation and spatial resection. The results show that the CBIR and the subsequent SfM are robust methods for various kinds of buildings and different quantity of data. The absolute accuracy of the camera positions after georeferencing lies in the range of a few meters likely introduced by the inaccurate LOD2 models used for transformation. The proposed photogrammetric method, the database structure, and the 4D visualization interface enable adding historical urban photographs and 3D models from other locations. KW - historical images KW - 4D-GIS KW - content-based image retrieval KW - Structure-from-Motion KW - camera orientation KW - feature matching Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-311103 SN - 2072-4292 VL - 15 IS - 7 ER - TY - JOUR A1 - Fischer, Norbert A1 - Hartelt, Alexander A1 - Puppe, Frank T1 - Line-level layout recognition of historical documents with background knowledge JF - Algorithms N2 - Digitization and transcription of historic documents offer new research opportunities for humanists and are the topics of many edition projects. However, manual work is still required for the main phases of layout recognition and the subsequent optical character recognition (OCR) of early printed documents. This paper describes and evaluates how deep learning approaches recognize text lines and can be extended to layout recognition using background knowledge. The evaluation was performed on five corpora of early prints from the 15th and 16th Centuries, representing a variety of layout features. While the main text with standard layouts could be recognized in the correct reading order with a precision and recall of up to 99.9%, also complex layouts were recognized at a rate as high as 90% by using background knowledge, the full potential of which was revealed if many pages of the same source were transcribed. KW - layout recognition KW - background knowledge KW - historical document analysis KW - fully convolutional neural networks KW - baseline detection KW - text line detection Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-310938 SN - 1999-4893 VL - 16 IS - 3 ER - TY - JOUR A1 - Kirikkayis, Yusuf A1 - Gallik, Florian A1 - Winter, Michael A1 - Reichert, Manfred T1 - BPMNE4IoT: a framework for modeling, executing and monitoring IoT-driven processes JF - Future Internet N2 - The Internet of Things (IoT) enables a variety of smart applications, including smart home, smart manufacturing, and smart city. By enhancing Business Process Management Systems with IoT capabilities, the execution and monitoring of business processes can be significantly improved. Providing a holistic support for modeling, executing and monitoring IoT-driven processes, however, constitutes a challenge. Existing process modeling and process execution languages, such as BPMN 2.0, are unable to fully meet the IoT characteristics (e.g., asynchronicity and parallelism) of IoT-driven processes. In this article, we present BPMNE4IoT—A holistic framework for modeling, executing and monitoring IoT-driven processes. We introduce various artifacts and events based on the BPMN 2.0 metamodel that allow realizing the desired IoT awareness of business processes. The framework is evaluated along two real-world scenarios from two different domains. Moreover, we present a user study for comparing BPMNE4IoT and BPMN 2.0. In particular, this study has confirmed that the BPMNE4IoT framework facilitates the support of IoT-driven processes. KW - IoT KW - BPM KW - BPMN KW - IoT-driven processes Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-304097 SN - 1999-5903 VL - 15 IS - 3 ER - TY - JOUR A1 - Wienrich, Carolin A1 - Carolus, Astrid A1 - Markus, André A1 - Augustin, Yannik A1 - Pfister, Jan A1 - Hotho, Andreas T1 - Long-term effects of perceived friendship with intelligent voice assistants on usage behavior, user experience, and social perceptions JF - Computers N2 - Social patterns and roles can develop when users talk to intelligent voice assistants (IVAs) daily. The current study investigates whether users assign different roles to devices and how this affects their usage behavior, user experience, and social perceptions. Since social roles take time to establish, we equipped 106 participants with Alexa or Google assistants and some smart home devices and observed their interactions for nine months. We analyzed diverse subjective (questionnaire) and objective data (interaction data). By combining social science and data science analyses, we identified two distinct clusters—users who assigned a friendship role to IVAs over time and users who did not. Interestingly, these clusters exhibited significant differences in their usage behavior, user experience, and social perceptions of the devices. For example, participants who assigned a role to IVAs attributed more friendship to them used them more frequently, reported more enjoyment during interactions, and perceived more empathy for IVAs. In addition, these users had distinct personal requirements, for example, they reported more loneliness. This study provides valuable insights into the role-specific effects and consequences of voice assistants. Recent developments in conversational language models such as ChatGPT suggest that the findings of this study could make an important contribution to the design of dialogic human–AI interactions. KW - intelligent voice assistant KW - smart speaker KW - social relationship KW - social role KW - long-term analysis KW - social interaction KW - human–computer interaction KW - anthropomorphism Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313552 SN - 2073-431X VL - 12 IS - 4 ER - TY - JOUR A1 - Caliskan, Aylin A1 - Crouch, Samantha A. W. A1 - Giddins, Sara A1 - Dandekar, Thomas A1 - Dangwal, Seema T1 - Progeria and aging — Omics based comparative analysis JF - Biomedicines N2 - Since ancient times aging has also been regarded as a disease, and humankind has always strived to extend the natural lifespan. Analyzing the genes involved in aging and disease allows for finding important indicators and biological markers for pathologies and possible therapeutic targets. An example of the use of omics technologies is the research regarding aging and the rare and fatal premature aging syndrome progeria (Hutchinson-Gilford progeria syndrome, HGPS). In our study, we focused on the in silico analysis of differentially expressed genes (DEGs) in progeria and aging, using a publicly available RNA-Seq dataset (GEO dataset GSE113957) and a variety of bioinformatics tools. Despite the GSE113957 RNA-Seq dataset being well-known and frequently analyzed, the RNA-Seq data shared by Fleischer et al. is far from exhausted and reusing and repurposing the data still reveals new insights. By analyzing the literature citing the use of the dataset and subsequently conducting a comparative analysis comparing the RNA-Seq data analyses of different subsets of the dataset (healthy children, nonagenarians and progeria patients), we identified several genes involved in both natural aging and progeria (KRT8, KRT18, ACKR4, CCL2, UCP2, ADAMTS15, ACTN4P1, WNT16, IGFBP2). Further analyzing these genes and the pathways involved indicated their possible roles in aging, suggesting the need for further in vitro and in vivo research. In this paper, we (1) compare “normal aging” (nonagenarians vs. healthy children) and progeria (HGPS patients vs. healthy children), (2) enlist genes possibly involved in both the natural aging process and progeria, including the first mention of IGFBP2 in progeria, (3) predict miRNAs and interactomes for WNT16 (hsa-mir-181a-5p), UCP2 (hsa-mir-26a-5p and hsa-mir-124-3p), and IGFBP2 (hsa-mir-124-3p, hsa-mir-126-3p, and hsa-mir-27b-3p), (4) demonstrate the compatibility of well-established R packages for RNA-Seq analysis for researchers interested but not yet familiar with this kind of analysis, and (5) present comparative proteomics analyses to show an association between our RNA-Seq data analyses and corresponding changes in protein expression. KW - progeria KW - aging KW - omics KW - RNA sequencing KW - bioinformatics KW - sun exposure KW - HGPS KW - IGFBP2 KW - ACKR4 KW - WNT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-289868 SN - 2227-9059 VL - 10 IS - 10 ER - TY - JOUR A1 - Latoschik, Marc Erich A1 - Wienrich, Carolin T1 - Congruence and plausibility, not presence: pivotal conditions for XR experiences and effects, a novel approach JF - Frontiers in Virtual Reality N2 - Presence is often considered the most important quale describing the subjective feeling of being in a computer-generated and/or computer-mediated virtual environment. The identification and separation of orthogonal presence components, i.e., the place illusion and the plausibility illusion, has been an accepted theoretical model describing Virtual Reality (VR) experiences for some time. This perspective article challenges this presence-oriented VR theory. First, we argue that a place illusion cannot be the major construct to describe the much wider scope of virtual, augmented, and mixed reality (VR, AR, MR: or XR for short). Second, we argue that there is no plausibility illusion but merely plausibility, and we derive the place illusion caused by the congruent and plausible generation of spatial cues and similarly for all the current model’s so-defined illusions. Finally, we propose congruence and plausibility to become the central essential conditions in a novel theoretical model describing XR experiences and effects. KW - XR KW - experience KW - presence KW - congruence KW - plausibility KW - coherence KW - theory KW - prediction Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-284787 SN - 2673-4192 VL - 3 ER - TY - JOUR A1 - Landeck, Maximilian A1 - Alvarez Igarzábal, Federico A1 - Unruh, Fabian A1 - Habenicht, Hannah A1 - Khoshnoud, Shiva A1 - Wittmann, Marc A1 - Lugrin, Jean-Luc A1 - Latoschik, Marc Erich T1 - Journey through a virtual tunnel: Simulated motion and its effects on the experience of time JF - Frontiers in Virtual Reality N2 - This paper examines the relationship between time and motion perception in virtual environments. Previous work has shown that the perception of motion can affect the perception of time. We developed a virtual environment that simulates motion in a tunnel and measured its effects on the estimation of the duration of time, the speed at which perceived time passes, and the illusion of self-motion, also known as vection. When large areas of the visual field move in the same direction, vection can occur; observers often perceive this as self-motion rather than motion of the environment. To generate different levels of vection and investigate its effects on time perception, we developed an abstract procedural tunnel generator. The generator can simulate different speeds and densities of tunnel sections (visibly distinguishable sections that form the virtual tunnel), as well as the degree of embodiment of the user avatar (with or without virtual hands). We exposed participants to various tunnel simulations with different durations, speeds, and densities in a remote desktop and a virtual reality (VR) laboratory study. Time passed subjectively faster under high-speed and high-density conditions in both studies. The experience of self-motion was also stronger under high-speed and high-density conditions. Both studies revealed a significant correlation between the perceived passage of time and perceived self-motion. Subjects in the virtual reality study reported a stronger self-motion experience, a faster perceived passage of time, and shorter time estimates than subjects in the desktop study. Our results suggest that a virtual tunnel simulation can manipulate time perception in virtual reality. We will explore these results for the development of virtual reality applications for therapeutic approaches in our future work. This could be particularly useful in treating disorders like depression, autism, and schizophrenia, which are known to be associated with distortions in time perception. For example, the tunnel could be therapeutically applied by resetting patients’ time perceptions by exposing them to the tunnel under different conditions, such as increasing or decreasing perceived time. KW - passage of time KW - illusion of self-motion KW - vection KW - virtual tunnel KW - therapeutic application KW - virtual reality KW - extended reality (XR) Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-301519 SN - 2673-4192 VL - 3 ER - TY - JOUR A1 - Holfelder, Marc A1 - Mulansky, Lena A1 - Schlee, Winfried A1 - Baumeister, Harald A1 - Schobel, Johannes A1 - Greger, Helmut A1 - Hoff, Andreas A1 - Pryss, Rüdiger T1 - Medical device regulation efforts for mHealth apps during the COVID-19 pandemic — an experience report of Corona Check and Corona Health JF - J — Multidisciplinary Scientific Journal N2 - Within the healthcare environment, mobile health (mHealth) applications (apps) are becoming more and more important. The number of new mHealth apps has risen steadily in the last years. Especially the COVID-19 pandemic has led to an enormous amount of app releases. In most countries, mHealth applications have to be compliant with several regulatory aspects to be declared a “medical app”. However, the latest applicable medical device regulation (MDR) does not provide more details on the requirements for mHealth applications. When developing a medical app, it is essential that all contributors in an interdisciplinary team — especially software engineers — are aware of the specific regulatory requirements beforehand. The development process, however, should not be stalled due to integration of the MDR. Therefore, a developing framework that includes these aspects is required to facilitate a reliable and quick development process. The paper at hand introduces the creation of such a framework on the basis of the Corona Health and Corona Check apps. The relevant regulatory guidelines are listed and summarized as a guidance for medical app developments during the pandemic and beyond. In particular, the important stages and challenges faced that emerged during the entire development process are highlighted. KW - mHealth KW - mobile application KW - MDR KW - medical device regulation KW - medical device software Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285434 SN - 2571-8800 VL - 4 IS - 2 SP - 206 EP - 222 ER - TY - JOUR A1 - Obremski, David A1 - Friedrich, Paula A1 - Haak, Nora A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - The impact of mixed-cultural speech on the stereotypical perception of a virtual robot JF - Frontiers in Robotics and AI N2 - Despite the fact that mixed-cultural backgrounds become of increasing importance in our daily life, the representation of multiple cultural backgrounds in one entity is still rare in socially interactive agents (SIAs). This paper’s contribution is twofold. First, it provides a survey of research on mixed-cultured SIAs. Second, it presents a study investigating how mixed-cultural speech (in this case, non-native accent) influences how a virtual robot is perceived in terms of personality, warmth, competence and credibility. Participants with English or German respectively as their first language watched a video of a virtual robot speaking in either standard English or German-accented English. It was expected that the German-accented speech would be rated more positively by native German participants as well as elicit the German stereotypes credibility and conscientiousness for both German and English participants. Contrary to the expectations, German participants rated the virtual robot lower in terms of competence and credibility when it spoke with a German accent, whereas English participants perceived the virtual robot with a German accent as more credible compared to the version without an accent. Both the native English and native German listeners classified the virtual robot with a German accent as significantly more neurotic than the virtual robot speaking standard English. This work shows that by solely implementing a non-native accent in a virtual robot, stereotypes are partly transferred. It also shows that the implementation of a non-native accent leads to differences in the perception of the virtual robot. KW - non-native accent KW - social robotics KW - intelligent virtual agents KW - stereotypes KW - mixed-cultural KW - culturally aware KW - socially interactive agents Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-293531 SN - 2296-9144 VL - 9 ER - TY - JOUR A1 - Tsoulias, Nikos A1 - Jörissen, Sven A1 - Nüchter, Andreas T1 - An approach for monitoring temperature on fruit surface by means of thermal point cloud JF - MethodsX N2 - Heat and excessive solar radiation can produce abiotic stresses during apple maturation, resulting fruit quality. Therefore, the monitoring of temperature on fruit surface (FST) over the growing period can allow to identify thresholds, above of which several physiological disorders such as sunburn may occur in apple. The current approaches neglect spatial variation of FST and have reduced repeatability, resulting in unreliable predictions. In this study, LiDAR laser scanning and thermal imaging were employed to detect the temperature on fruit surface by means of 3D point cloud. A process for calibrating the two sensors based on an active board target and producing a 3D thermal point cloud was suggested. After calibration, the sensor system was utilised to scan the fruit trees, while temperature values assigned in the corresponding 3D point cloud were based on the extrinsic calibration. Whereas a fruit detection algorithm was performed to segment the FST from each apple. • The approach allows the calibration of LiDAR laser scanner with thermal camera in order to produce a 3D thermal point cloud. • The method can be applied in apple trees for segmenting FST in 3D. Whereas the approach can be utilised to predict several physiological disorders including sunburn on fruit surface. KW - point cloud KW - thermal point cloud KW - fruit temperature KW - sunburn KW - food quality KW - precision horticulture Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300270 SN - 2215-0161 VL - 9 ER - TY - JOUR A1 - Seufert, Anika A1 - Poignée, Fabian A1 - Hoßfeld, Tobias A1 - Seufert, Michael T1 - Pandemic in the digital age: analyzing WhatsApp communication behavior before, during, and after the COVID-19 lockdown JF - Humanities and Social Sciences Communications N2 - The strict restrictions introduced by the COVID-19 lockdowns, which started from March 2020, changed people’s daily lives and habits on many different levels. In this work, we investigate the impact of the lockdown on the communication behavior in the mobile instant messaging application WhatsApp. Our evaluations are based on a large dataset of 2577 private chat histories with 25,378,093 messages from 51,973 users. The analysis of the one-to-one and group conversations confirms that the lockdown severely altered the communication in WhatsApp chats compared to pre-pandemic time ranges. In particular, we observe short-term effects, which caused an increased message frequency in the first lockdown months and a shifted communication activity during the day in March and April 2020. Moreover, we also see long-term effects of the ongoing pandemic situation until February 2021, which indicate a change of communication behavior towards more regular messaging, as well as a persisting change in activity during the day. The results of our work show that even anonymized chat histories can tell us a lot about people’s behavior and especially behavioral changes during the COVID-19 pandemic and thus are of great relevance for behavioral researchers. Furthermore, looking at the pandemic from an Internet provider perspective, these insights can be used during the next pandemic, or if the current COVID-19 situation worsens, to adapt communication networks to the changed usage behavior early on and thus avoid network congestion. KW - cultural and media studies KW - information systems and information technology KW - science, technology and society Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300261 VL - 9 ER - TY - RPRT A1 - Herrmann, Martin A1 - Rizk, Amr T1 - On Data Plane Multipath Scheduling for Connected Mobility Applications T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized. KW - multipath scheduling KW - connected mobility applications Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322033 N1 - Aktualisierte Version unter https://doi.org/10.25972/OPUS-35344 ER - TY - JOUR A1 - Müller, Konstantin A1 - Leppich, Robert A1 - Geiß, Christian A1 - Borst, Vanessa A1 - Pelizari, Patrick Aravena A1 - Kounev, Samuel A1 - Taubenböck, Hannes T1 - Deep neural network regression for normalized digital surface model generation with Sentinel-2 imagery JF - IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing N2 - In recent history, normalized digital surface models (nDSMs) have been constantly gaining importance as a means to solve large-scale geographic problems. High-resolution surface models are precious, as they can provide detailed information for a specific area. However, measurements with a high resolution are time consuming and costly. Only a few approaches exist to create high-resolution nDSMs for extensive areas. This article explores approaches to extract high-resolution nDSMs from low-resolution Sentinel-2 data, allowing us to derive large-scale models. We thereby utilize the advantages of Sentinel 2 being open access, having global coverage, and providing steady updates through a high repetition rate. Several deep learning models are trained to overcome the gap in producing high-resolution surface maps from low-resolution input data. With U-Net as a base architecture, we extend the capabilities of our model by integrating tailored multiscale encoders with differently sized kernels in the convolution as well as conformed self-attention inside the skip connection gates. Using pixelwise regression, our U-Net base models can achieve a mean height error of approximately 2 m. Moreover, through our enhancements to the model architecture, we reduce the model error by more than 7%. KW - Deep learning KW - multiscale encoder KW - sentinel KW - surface model Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349424 SN - 1939-1404 VL - 16 ER - TY - JOUR A1 - Liman, Leon A1 - May, Bernd A1 - Fette, Georg A1 - Krebs, Jonathan A1 - Puppe, Frank T1 - Using a clinical data warehouse to calculate and present key metrics for the radiology department: implementation and performance evaluation JF - JMIR Medical Informatics N2 - Background: Due to the importance of radiologic examinations, such as X-rays or computed tomography scans, for many clinical diagnoses, the optimal use of the radiology department is 1 of the primary goals of many hospitals. Objective: This study aims to calculate the key metrics of this use by creating a radiology data warehouse solution, where data from radiology information systems (RISs) can be imported and then queried using a query language as well as a graphical user interface (GUI). Methods: Using a simple configuration file, the developed system allowed for the processing of radiology data exported from any kind of RIS into a Microsoft Excel, comma-separated value (CSV), or JavaScript Object Notation (JSON) file. These data were then imported into a clinical data warehouse. Additional values based on the radiology data were calculated during this import process by implementing 1 of several provided interfaces. Afterward, the query language and GUI of the data warehouse were used to configure and calculate reports on these data. For the most common types of requested reports, a web interface was created to view their numbers as graphics. Results: The tool was successfully tested with the data of 4 different German hospitals from 2018 to 2021, with a total of 1,436,111 examinations. The user feedback was good, since all their queries could be answered if the available data were sufficient. The initial processing of the radiology data for using them with the clinical data warehouse took (depending on the amount of data provided by each hospital) between 7 minutes and 1 hour 11 minutes. Calculating 3 reports of different complexities on the data of each hospital was possible in 1-3 seconds for reports with up to 200 individual calculations and in up to 1.5 minutes for reports with up to 8200 individual calculations. Conclusions: A system was developed with the main advantage of being generic concerning the export of different RISs as well as concerning the configuration of queries for various reports. The queries could be configured easily using the GUI of the data warehouse, and their results could be exported into the standard formats Excel and CSV for further processing. KW - data warehouse KW - eHealth KW - hospital data KW - electronic health records KW - radiology KW - statistics and numerical data KW - medical records Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349411 SN - 2291-9694 VL - 11 ER - TY - JOUR A1 - Seufert, Anika A1 - Poignée, Fabian A1 - Seufert, Michael A1 - Hoßfeld, Tobias T1 - Share and multiply: modeling communication and generated traffic in private WhatsApp groups JF - IEEE Access N2 - Group-based communication is a highly popular communication paradigm, which is especially prominent in mobile instant messaging (MIM) applications, such as WhatsApp. Chat groups in MIM applications facilitate the sharing of various types of messages (e.g., text, voice, image, video) among a large number of participants. As each message has to be transmitted to every other member of the group, which multiplies the traffic, this has a massive impact on the underlying communication networks. However, most chat groups are private and network operators cannot obtain deep insights into MIM communication via network measurements due to end-to-end encryption. Thus, the generation of traffic is not well understood, given that it depends on sizes of communication groups, speed of communication, and exchanged message types. In this work, we provide a huge data set of 5,956 private WhatsApp chat histories, which contains over 76 million messages from more than 117,000 users. We describe and model the properties of chat groups and users, and the communication within these chat groups, which gives unprecedented insights into private MIM communication. In addition, we conduct exemplary measurements for the most popular message types, which empower the provided models to estimate the traffic over time in a chat group. KW - communication models KW - group-based communication KW - mobile instant messaging KW - mobile messaging application KW - private chat groups KW - WhatsApp Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349430 VL - 11 ER - TY - RPRT A1 - Herrmann, Martin A1 - Rizk, Amr T1 - On Data Plane Multipath Scheduling for Connected Mobility Applications T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized. KW - multipath scheduling KW - connected mobility applications Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-353444 N1 - Ursprüngliche Version unter https://doi.org/10.25972/OPUS-32203 ET - aktualisierte Version ER - TY - JOUR A1 - Krenzer, Adrian A1 - Heil, Stefan A1 - Fitting, Daniel A1 - Matti, Safa A1 - Zoller, Wolfram G. A1 - Hann, Alexander A1 - Puppe, Frank T1 - Automated classification of polyps using deep learning architectures and few-shot learning JF - BMC Medical Imaging N2 - Background Colorectal cancer is a leading cause of cancer-related deaths worldwide. The best method to prevent CRC is a colonoscopy. However, not all colon polyps have the risk of becoming cancerous. Therefore, polyps are classified using different classification systems. After the classification, further treatment and procedures are based on the classification of the polyp. Nevertheless, classification is not easy. Therefore, we suggest two novel automated classifications system assisting gastroenterologists in classifying polyps based on the NICE and Paris classification. Methods We build two classification systems. One is classifying polyps based on their shape (Paris). The other classifies polyps based on their texture and surface patterns (NICE). A two-step process for the Paris classification is introduced: First, detecting and cropping the polyp on the image, and secondly, classifying the polyp based on the cropped area with a transformer network. For the NICE classification, we design a few-shot learning algorithm based on the Deep Metric Learning approach. The algorithm creates an embedding space for polyps, which allows classification from a few examples to account for the data scarcity of NICE annotated images in our database. Results For the Paris classification, we achieve an accuracy of 89.35 %, surpassing all papers in the literature and establishing a new state-of-the-art and baseline accuracy for other publications on a public data set. For the NICE classification, we achieve a competitive accuracy of 81.13 % and demonstrate thereby the viability of the few-shot learning paradigm in polyp classification in data-scarce environments. Additionally, we show different ablations of the algorithms. Finally, we further elaborate on the explainability of the system by showing heat maps of the neural network explaining neural activations. Conclusion Overall we introduce two polyp classification systems to assist gastroenterologists. We achieve state-of-the-art performance in the Paris classification and demonstrate the viability of the few-shot learning paradigm in the NICE classification, addressing the prevalent data scarcity issues faced in medical machine learning. KW - machine learning KW - deep learning KW - endoscopy KW - gastroenterology KW - automation KW - image classification KW - transformer KW - deep metric learning KW - few-shot learning Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-357465 VL - 23 ER - TY - JOUR A1 - Bayer, Daniel A1 - Pruckner, Marco T1 - A digital twin of a local energy system based on real smart meter data JF - Energy Informatics N2 - The steadily increasing usage of smart meters generates a valuable amount of high-resolution data about the individual energy consumption and production of local energy systems. Private households install more and more photovoltaic systems, battery storage and big consumers like heat pumps. Thus, our vision is to augment these collected smart meter time series of a complete system (e.g., a city, town or complex institutions like airports) with simulatively added previously named components. We, therefore, propose a novel digital twin of such an energy system based solely on a complete set of smart meter data including additional building data. Based on the additional geospatial data, the twin is intended to represent the addition of the abovementioned components as realistically as possible. Outputs of the twin can be used as a decision support for either system operators where to strengthen the system or for individual households where and how to install photovoltaic systems and batteries. Meanwhile, the first local energy system operators had such smart meter data of almost all residential consumers for several years. We acquire those of an exemplary operator and discuss a case study presenting some features of our digital twin and highlighting the value of the combination of smart meter and geospatial data. KW - digital twin KW - simulation KW - local energy system KW - decision support system KW - smart meter data utilization KW - future energy grid exploration Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-357456 VL - 6 ER - TY - JOUR A1 - Hentschel, Simon A1 - Kobs, Konstantin A1 - Hotho, Andreas T1 - CLIP knows image aesthetics JF - Frontiers in Artificial Intelligence N2 - Most Image Aesthetic Assessment (IAA) methods use a pretrained ImageNet classification model as a base to fine-tune. We hypothesize that content classification is not an optimal pretraining task for IAA, since the task discourages the extraction of features that are useful for IAA, e.g., composition, lighting, or style. On the other hand, we argue that the Contrastive Language-Image Pretraining (CLIP) model is a better base for IAA models, since it has been trained using natural language supervision. Due to the rich nature of language, CLIP needs to learn a broad range of image features that correlate with sentences describing the image content, composition, environments, and even subjective feelings about the image. While it has been shown that CLIP extracts features useful for content classification tasks, its suitability for tasks that require the extraction of style-based features like IAA has not yet been shown. We test our hypothesis by conducting a three-step study, investigating the usefulness of features extracted by CLIP compared to features obtained from the last layer of a comparable ImageNet classification model. In each step, we get more computationally expensive. First, we engineer natural language prompts that let CLIP assess an image's aesthetic without adjusting any weights in the model. To overcome the challenge that CLIP's prompting only is applicable to classification tasks, we propose a simple but effective strategy to convert multiple prompts to a continuous scalar as required when predicting an image's mean aesthetic score. Second, we train a linear regression on the AVA dataset using image features obtained by CLIP's image encoder. The resulting model outperforms a linear regression trained on features from an ImageNet classification model. It also shows competitive performance with fully fine-tuned networks based on ImageNet, while only training a single layer. Finally, by fine-tuning CLIP's image encoder on the AVA dataset, we show that CLIP only needs a fraction of training epochs to converge, while also performing better than a fine-tuned ImageNet model. Overall, our experiments suggest that CLIP is better suited as a base model for IAA methods than ImageNet pretrained networks. KW - Image Aesthetic Assessment KW - CLIP KW - language-image pre-training KW - text supervision KW - prompt engineering KW - AVA Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-297150 SN - 2624-8212 VL - 5 ER - TY - JOUR A1 - Gupta, Shishir K. A1 - Minocha, Rashmi A1 - Thapa, Prithivi Jung A1 - Srivastava, Mugdha A1 - Dandekar, Thomas T1 - Role of the pangolin in origin of SARS-CoV-2: an evolutionary perspective JF - International Journal of Molecular Sciences N2 - After the recent emergence of SARS-CoV-2 infection, unanswered questions remain related to its evolutionary history, path of transmission or divergence and role of recombination. There is emerging evidence on amino acid substitutions occurring in key residues of the receptor-binding domain of the spike glycoprotein in coronavirus isolates from bat and pangolins. In this article, we summarize our current knowledge on the origin of SARS-CoV-2. We also analyze the host ACE2-interacting residues of the receptor-binding domain of spike glycoprotein in SARS-CoV-2 isolates from bats, and compare it to pangolin SARS-CoV-2 isolates collected from Guangdong province (GD Pangolin-CoV) and Guangxi autonomous regions (GX Pangolin-CoV) of South China. Based on our comparative analysis, we support the view that the Guangdong Pangolins are the intermediate hosts that adapted the SARS-CoV-2 and represented a significant evolutionary link in the path of transmission of SARS-CoV-2 virus. We also discuss the role of intermediate hosts in the origin of Omicron. KW - COVID-19 KW - SARS-CoV-2 KW - origin KW - evolution KW - intermediate host KW - pangolin KW - mutation KW - recombination KW - adaptation KW - transmission KW - comparative sequence analysis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-285995 SN - 1422-0067 VL - 23 IS - 16 ER - TY - THES A1 - Bleier, Michael T1 - Underwater Laser Scanning - Refractive Calibration, Self-calibration and Mapping for 3D Reconstruction T1 - Laserscanning unter Wasser - Refraktive Kalibrierung, Selbstkalibrierung und Kartierung zur 3D Rekonstruktion N2 - There is great interest in affordable, precise and reliable metrology underwater: Archaeologists want to document artifacts in situ with high detail. In marine research, biologists require the tools to monitor coral growth and geologists need recordings to model sediment transport. Furthermore, for offshore construction projects, maintenance and inspection millimeter-accurate measurements of defects and offshore structures are essential. While the process of digitizing individual objects and complete sites on land is well understood and standard methods, such as Structure from Motion or terrestrial laser scanning, are regularly applied, precise underwater surveying with high resolution is still a complex and difficult task. Applying optical scanning techniques in water is challenging due to reduced visibility caused by turbidity and light absorption. However, optical underwater scanners provide significant advantages in terms of achievable resolution and accuracy compared to acoustic systems. This thesis proposes an underwater laser scanning system and the algorithms for creating dense and accurate 3D scans in water. It is based on laser triangulation and the main optical components are an underwater camera and a cross-line laser projector. The prototype is configured with a motorized yaw axis for capturing scans from a tripod. Alternatively, it is mounted to a moving platform for mobile mapping. The main focus lies on the refractive calibration of the underwater camera and laser projector, the image processing and 3D reconstruction. For highest accuracy, the refraction at the individual media interfaces must be taken into account. This is addressed by an optimization-based calibration framework using a physical-geometric camera model derived from an analytical formulation of a ray-tracing projection model. In addition to scanning underwater structures, this work presents the 3D acquisition of semi-submerged structures and the correction of refraction effects. As in-situ calibration in water is complex and time-consuming, the challenge of transferring an in-air scanner calibration to water without re-calibration is investigated, as well as self-calibration techniques for structured light. The system was successfully deployed in various configurations for both static scanning and mobile mapping. An evaluation of the calibration and 3D reconstruction using reference objects and a comparison of free-form surfaces in clear water demonstrate the high accuracy potential in the range of one millimeter to less than one centimeter, depending on the measurement distance. Mobile underwater mapping and motion compensation based on visual-inertial odometry is demonstrated using a new optical underwater scanner based on fringe projection. Continuous registration of individual scans allows the acquisition of 3D models from an underwater vehicle. RGB images captured in parallel are used to create 3D point clouds of underwater scenes in full color. 3D maps are useful to the operator during the remote control of underwater vehicles and provide the building blocks to enable offshore inspection and surveying tasks. The advancing automation of the measurement technology will allow non-experts to use it, significantly reduce acquisition time and increase accuracy, making underwater metrology more cost-effective. N2 - Das Interesse an präziser, zuverlässiger und zugleich kostengünstiger Unterwassermesstechnik ist groß. Beispielsweise wollen Archäologen Artefakte in situ mit hoher Detailtreue dokumentieren und in der Meeresforschung benötigen Biologen Messwerkzeuge zur Beobachtung des Korallenwachstums. Auch Geologen sind auf Messdaten angewiesen, um Sedimenttransporte zu modellieren. Darüber hinaus ist für die Errichtung von Offshore-Bauwerken, sowie deren Wartung und Inspektion eine millimetergenaue Vermessung von vorhandenen Strukturen und Defekten unerlässlich. Während die Digitalisierung einzelner Objekte und ganzer Areale an Land gut erforscht ist und verschiedene Standardmethoden, wie zum Beispiel Structure from Motion oder terrestrisches Laserscanning, regelmäßig eingesetzt werden, ist die präzise und hochauflösende Unterwasservermessung nach wie vor eine komplexe und schwierige Aufgabe. Die Anwendung optischer Messtechnik im Wasser ist aufgrund der eingeschränkten Sichttiefe durch Trübung und Lichtabsorption eine Herausforderung. Optische Unterwasserscanner bieten jedoch Vorteile hinsichtlich der erreichbaren Auflösung und Genauigkeit gegenüber akustischen Systemen. In dieser Arbeit werden ein Unterwasser-Laserscanning-System und die Algorithmen zur Erzeugung von 3D-Scans mit hoher Punktdichte im Wasser vorgestellt. Es basiert auf Lasertriangulation und die optischen Hauptkomponenten sind eine Unterwasserkamera und ein Kreuzlinienlaserprojektor. Das System ist mit einer motorisierten Drehachse ausgestattet, um Scans von einem Stativ aus aufzunehmen. Alternativ kann es von einer beweglichen Plattform aus für mobile Kartierung eingesetzt werden. Das Hauptaugenmerk liegt auf der refraktiven Kalibrierung der Unterwasserkamera und des Laserprojektors, der Bildverarbeitung und der 3D-Rekonstruktion. Um höchste Genauigkeit zu erreichen, muss die Brechung an den einzelnen Medienübergängen berücksichtigt werden. Dies wird durch ein physikalisch-geometrisches Kameramodell, das auf einer analytischen Beschreibung der Strahlenverfolgung basiert, und ein optimierungsbasiertes Kalibrierverfahren erreicht. Neben dem Scannen von Unterwasserstrukturen wird in dieser Arbeit auch die 3D-Erfassung von teilweise im Wasser befindlichen Strukturen und die Korrektur der dabei auftretenden Brechungseffekte vorgestellt. Da die Kalibrierung im Wasser komplex und zeitintensiv ist, wird die Übertragung einer Kalibrierung des Scanners in Luft auf die Bedingungen im Wasser ohne Neukalibrierung, sowie die Selbstkalibrierung für Lichtschnittverfahren untersucht. Das System wurde in verschiedenen Konfigurationen sowohl für statisches Scannen als auch für die mobile Kartierung erfolgreich eingesetzt. Die Validierung der Kalibrierung und der 3D-Rekonstruktion anhand von Referenzobjekten und der Vergleich von Freiformflächen in klarem Wasser zeigen das hohe Genauigkeitspotenzial im Bereich von einem Millimeter bis weniger als einem Zentimeter in Abhängigkeit von der Messdistanz. Die mobile Unterwasserkartierung und Bewegungskompensation anhand visuell-inertialer Odometrie wird mit einem neuen optischen Unterwasserscanner auf Basis der Streifenprojektion demonstriert. Dabei ermöglicht die kontinuierliche Registrierung von Einzelscans die Erfassung von 3D-Modellen von einem Unterwasserfahrzeug aus. Mit Hilfe von parallel aufgenommenen RGB-Bildern werden dabei farbige 3D-Punktwolken der Unterwasserszenen erstellt. Diese 3D-Karten dienen beispielsweise dem Bediener bei der Fernsteuerung von Unterwasserfahrzeugen und bilden die Grundlage für Offshore-Inspektions- und Vermessungsaufgaben. Die fortschreitende Automatisierung der Messtechnik wird somit auch eine Verwendung durch Nichtfachleute ermöglichen und gleichzeitig die Erfassungszeit erheblich verkürzen und die Genauigkeit verbessern, was die Vermessung im Wasser kostengünstiger und effizienter macht. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 28 KW - Selbstkalibrierung KW - Punktwolke KW - Bildverarbeitung KW - 3D Reconstruction KW - Self-calibration KW - Underwater Scanning KW - Underwater Mapping KW - Dreidimensionale Rekonstruktion KW - 3D-Rekonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322693 SN - 978-3-945459-45-4 ER - TY - RPRT A1 - Großmann, Marcel A1 - Le, Duy Thanh T1 - Visualization of Network Emulation Enabled by Kathará T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - In network research, reproducibility of experiments is not always easy to achieve. Infrastructures are cumbersome to set up or are not available due to vendor-specific devices. Emulators try to overcome those issues to a given extent and are available in different service models. Unfortunately, the usability of emulators requires time-consuming efforts and a deep understanding of their functionality. At first, we analyze to which extent currently available open-source emulators support network configurations and how user-friendly they are. With these insights, we describe, how an ease-to-use emulator is implemented and may run as a Network Emulator as a Service (NEaaS). Therefore, virtualization plays a major role in order to deploy a NEaaS based on Kathará. KW - Network Emulator KW - Visualized Kathará KW - Containerization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322189 ER - TY - RPRT A1 - Dworzak, Manuel A1 - Großmann, Marcel A1 - Le, Duy Thanh T1 - Federated Learning for Service Placement in Fog and Edge Computing T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - Service orchestration requires enormous attention and is a struggle nowadays. Of course, virtualization provides a base level of abstraction for services to be deployable on a lot of infrastructures. With container virtualization, the trend to migrate applications to a micro-services level in order to be executable in Fog and Edge Computing environments increases manageability and maintenance efforts rapidly. Similarly, network virtualization adds effort to calibrate IP flows for Software-Defined Networks and eventually route it by means of Network Function Virtualization. Nevertheless, there are concepts like MAPE-K to support micro-service distribution in next-generation cloud and network environments. We want to explore, how a service distribution can be improved by adopting machine learning concepts for infrastructure or service changes. Therefore, we show how federated machine learning is integrated into a cloud-to-fog-continuum without burdening single nodes. KW - fog computing KW - SDN KW - orchestration KW - federated learning Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322193 ER - TY - JOUR A1 - Greubel, André A1 - Andres, Daniela A1 - Hennecke, Martin T1 - Analyzing reporting on ransomware incidents: a case study JF - Social Sciences N2 - Knowledge about ransomware is important for protecting sensitive data and for participating in public debates about suitable regulation regarding its security. However, as of now, this topic has received little to no attention in most school curricula. As such, it is desirable to analyze what citizens can learn about this topic outside of formal education, e.g., from news articles. This analysis is both relevant to analyzing the public discourse about ransomware, as well as to identify what aspects of this topic should be included in the limited time available for this topic in formal education. Thus, this paper was motivated both by educational and media research. The central goal is to explore how the media reports on this topic and, additionally, to identify potential misconceptions that could stem from this reporting. To do so, we conducted an exploratory case study into the reporting of 109 media articles regarding a high-impact ransomware event: the shutdown of the Colonial Pipeline (located in the east of the USA). We analyzed how the articles introduced central terminology, what details were provided, what details were not, and what (mis-)conceptions readers might receive from them. Our results show that an introduction of the terminology and technical concepts of security is insufficient for a complete understanding of the incident. Most importantly, the articles may lead to four misconceptions about ransomware that are likely to lead to misleading conclusions about the responsibility for the incident and possible political and technical options to prevent such attacks in the future. KW - media analysis KW - informal education KW - IT security KW - ransomware KW - misconceptions Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-313746 SN - 2076-0760 VL - 12 IS - 5 ER - TY - JOUR A1 - Hossfeld, Tobias A1 - Heegaard, Poul E. A1 - Kellerer, Wolfgang T1 - Comparing the scalability of communication networks and systems JF - IEEE Access N2 - Scalability is often mentioned in literature, but a stringent definition is missing. In particular, there is no general scalability assessment which clearly indicates whether a system scales or not or whether a system scales better than another. The key contribution of this article is the definition of a scalability index (SI) which quantifies if a system scales in comparison to another system, a hypothetical system, e.g., linear system, or the theoretically optimal system. The suggested SI generalizes different metrics from literature, which are specialized cases of our SI. The primary target of our scalability framework is, however, benchmarking of two systems, which does not require any reference system. The SI is demonstrated and evaluated for different use cases, that are (1) the performance of an IoT load balancer depending on the system load, (2) the availability of a communication system depending on the size and structure of the network, (3) scalability comparison of different location selection mechanisms in fog computing with respect to delays and energy consumption; (4) comparison of time-sensitive networking (TSN) mechanisms in terms of efficiency and utilization. Finally, we discuss how to use and how not to use the SI and give recommendations and guidelines in practice. To the best of our knowledge, this is the first work which provides a general SI for the comparison and benchmarking of systems, which is the primary target of our scalability analysis. KW - communication networks KW - performance KW - availability KW - scalability Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-349403 VL - 11 ER - TY - JOUR A1 - Loh, Frank A1 - Wamser, Florian A1 - Poignée, Fabian A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - YouTube Dataset on Mobile Streaming for Internet Traffic Modeling and Streaming Analysis JF - Scientific Data N2 - Around 4.9 billion Internet users worldwide watch billions of hours of online video every day. As a result, streaming is by far the predominant type of traffic in communication networks. According to Google statistics, three out of five video views come from mobile devices. Thus, in view of the continuous technological advances in end devices and increasing mobile use, datasets for mobile streaming are indispensable in research but only sparsely dealt with in literature so far. With this public dataset, we provide 1,081 hours of time-synchronous video measurements at network, transport, and application layer with the native YouTube streaming client on mobile devices. The dataset includes 80 network scenarios with 171 different individual bandwidth settings measured in 5,181 runs with limited bandwidth, 1,939 runs with emulated 3 G/4 G traces, and 4,022 runs with pre-defined bandwidth changes. This corresponds to 332 GB video payload. We present the most relevant quality indicators for scientific use, i.e., initial playback delay, streaming video quality, adaptive video quality changes, video rebuffering events, and streaming phases. KW - internet traffic KW - mobile streaming KW - YouTube Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300240 VL - 9 IS - 1 ER - TY - CHAP A1 - Abendschein, Robin A1 - Desai, Shital A1 - Astell, Arlene J. T1 - Towards Accessibility Guidelines for the Metaverse : A Synthesis of Recommendations for People Living With Dementia T2 - Conference on Human Factors in Computing Systems (CHI’23) : Workshop "Towards an Inclusive and Accessible Metaverse" N2 - Given the growing interest of corporate stakeholders in Metaverse applications, there is a need to understand accessibility of these technologies for marginalized populations such as people living with dementia to ensure inclusive design of Metaverse applications. We assessed the accessibility of extended reality technology for people living with mild cognitive impairment and dementia to develop accessibility guidelines for these technologies. We used four strategies to synthesize evidence for barriers and facilitators of accessibility: (1) Findings from a non-systematic literature review, (2) guidelines from well-researched technology, (3) exploration of selected mixed reality technologies, and (4) observations from four sessions and video data of people living with dementia using mixed reality technologies. We utilized template analysis to develop codes and themes towards accessibility guidelines. Future work can validate our preliminary findings by applying them on video recordings or testing them in experiments. KW - CHI Conference KW - Accessibility KW - Metaverse KW - extended reality KW - dementia KW - cognitive impairment KW - Human-centered computing / Access KW - Human-centered computing / Human computer interaction (HCI) / Interaction paradigms / Mixed / augmented reality KW - Human-centered computing / Human computer interaction (HCI) / Interaction paradigms / Virtual reality KW - Human-centered computing / Human computer interaction (HCI) / Interactiondevices KW - Human-centered computing / Human computerinteraction (HCI) / Interaction techniques Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-320199 UR - https://sites.google.com/view/accessiblemetaverse ER - TY - JOUR A1 - Breves, Priska A1 - Dodel, Nicola T1 - The influence of cybersickness and the media devices’ mobility on the persuasive effects of 360° commercials JF - Multimedia Tools and Applications N2 - With the rise of immersive media, advertisers have started to use 360° commercials to engage and persuade consumers. Two experiments were conducted to address research gaps and to validate the positive impact of 360° commercials in realistic settings. The first study (N = 62) compared the effects of 360° commercials using either a mobile cardboard head-mounted display (HMD) or a laptop. This experiment was conducted in the participants’ living rooms and incorporated individual feelings of cybersickness as a moderator. The participants who experienced the 360° commercial with the HMD reported higher spatial presence and product evaluation, but their purchase intentions were only increased when their reported cybersickness was low. The second experiment (N = 197) was conducted online and analyzed the impact of 360° commercials that were experienced with mobile (smartphone/tablet) or static (laptop/desktop) devices instead of HMDs. The positive effects of omnidirectional videos were stronger when participants used mobile devices. KW - virtual reality KW - immersive advertising KW - spatial presence KW - cybersickness KW - advertising effectiveness Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269194 SN - 1573-7721 VL - 80 IS - 18 ER - TY - JOUR A1 - Steininger, Michael A1 - Kobs, Konstantin A1 - Davidson, Padraig A1 - Krause, Anna A1 - Hotho, Andreas T1 - Density-based weighting for imbalanced regression JF - Machine Learning N2 - In many real world settings, imbalanced data impedes model performance of learning algorithms, like neural networks, mostly for rare cases. This is especially problematic for tasks focusing on these rare occurrences. For example, when estimating precipitation, extreme rainfall events are scarce but important considering their potential consequences. While there are numerous well studied solutions for classification settings, most of them cannot be applied to regression easily. Of the few solutions for regression tasks, barely any have explored cost-sensitive learning which is known to have advantages compared to sampling-based methods in classification tasks. In this work, we propose a sample weighting approach for imbalanced regression datasets called DenseWeight and a cost-sensitive learning approach for neural network regression with imbalanced data called DenseLoss based on our weighting scheme. DenseWeight weights data points according to their target value rarities through kernel density estimation (KDE). DenseLoss adjusts each data point’s influence on the loss according to DenseWeight, giving rare data points more influence on model training compared to common data points. We show on multiple differently distributed datasets that DenseLoss significantly improves model performance for rare data points through its density-based weighting scheme. Additionally, we compare DenseLoss to the state-of-the-art method SMOGN, finding that our method mostly yields better performance. Our approach provides more control over model training as it enables us to actively decide on the trade-off between focusing on common or rare cases through a single hyperparameter, allowing the training of better models for rare data points. KW - supervised learning KW - imbalanced regression KW - cost-sensitive learning KW - sample weighting KW - Kerneldensity estimation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269177 SN - 1573-0565 VL - 110 IS - 8 ER - TY - INPR A1 - Dandekar, Thomas T1 - Analysing the phase space of the standard model and its basic four forces from a qubit phase transition perspective: implications for large-scale structure generation and early cosmological events N2 - The phase space for the standard model of the basic four forces for n quanta includes all possible ensemble combinations of their quantum states m, a total of n**m states. Neighbor states reach according to transition possibilities (S-matrix) with emergent time from entropic ensemble gradients. We replace the “big bang” by a condensation event (interacting qubits become decoherent) and inflation by a crystallization event – the crystal unit cell guarantees same symmetries everywhere. Interacting qubits solidify and form a rapidly growing domain where the n**m states become separated ensemble states, rising long-range forces stop ultimately further growth. After that very early events, standard cosmology with the hot fireball model takes over. Our theory agrees well with lack of inflation traces in cosmic background measurements, large-scale structure of voids and filaments, supercluster formation, galaxy formation, dominance of matter and life-friendliness. We prove qubit interactions to be 1,2,4 or 8 dimensional (agrees with E8 symmetry of our universe). Repulsive forces at ultrashort distances result from quantization, long-range forces limit crystal growth. Crystals come and go in the qubit ocean. This selects for the ability to lay seeds for new crystals, for self-organization and life-friendliness. We give energy estimates for free qubits vs bound qubits, misplacements in the qubit crystal and entropy increase during qubit decoherence / crystal formation. Scalar fields for color interaction and gravity derive from the permeating qubit-interaction field. Hence, vacuum energy gets low only inside the qubit crystal. Condensed mathematics may advantageously model free / bound qubits in phase space. KW - phase space KW - cosmology KW - emergent time KW - qubit KW - phase transition KW - bit Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-298580 ER - TY - JOUR A1 - Döllinger, Nina A1 - Wienrich, Carolin A1 - Latoschik, Marc Erich T1 - Challenges and opportunities of immersive technologies for mindfulness meditation: a systematic review JF - Frontiers in Virtual Reality N2 - Mindfulness is considered an important factor of an individual's subjective well-being. Consequently, Human-Computer Interaction (HCI) has investigated approaches that strengthen mindfulness, i.e., by inventing multimedia technologies to support mindfulness meditation. These approaches often use smartphones, tablets, or consumer-grade desktop systems to allow everyday usage in users' private lives or in the scope of organized therapies. Virtual, Augmented, and Mixed Reality (VR, AR, MR; in short: XR) significantly extend the design space for such approaches. XR covers a wide range of potential sensory stimulation, perceptive and cognitive manipulations, content presentation, interaction, and agency. These facilities are linked to typical XR-specific perceptions that are conceptually closely related to mindfulness research, such as (virtual) presence and (virtual) embodiment. However, a successful exploitation of XR that strengthens mindfulness requires a systematic analysis of the potential interrelation and influencing mechanisms between XR technology, its properties, factors, and phenomena and existing models and theories of the construct of mindfulness. This article reports such a systematic analysis of XR-related research from HCI and life sciences to determine the extent to which existing research frameworks on HCI and mindfulness can be applied to XR technologies, the potential of XR technologies to support mindfulness, and open research gaps. Fifty papers of ACM Digital Library and National Institutes of Health's National Library of Medicine (PubMed) with and without empirical efficacy evaluation were included in our analysis. The results reveal that at the current time, empirical research on XR-based mindfulness support mainly focuses on therapy and therapeutic outcomes. Furthermore, most of the currently investigated XR-supported mindfulness interactions are limited to vocally guided meditations within nature-inspired virtual environments. While an analysis of empirical research on those systems did not reveal differences in mindfulness compared to non-mediated mindfulness practices, various design proposals illustrate that XR has the potential to provide interactive and body-based innovations for mindfulness practice. We propose a structured approach for future work to specify and further explore the potential of XR as mindfulness-support. The resulting framework provides design guidelines for XR-based mindfulness support based on the elements and psychological mechanisms of XR interactions. KW - virtual reality KW - augmented reality KW - mindfulness KW - XR KW - meditation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259047 VL - 2 ER - TY - JOUR A1 - Prakash, Subash A1 - Unnikrishnan, Vishnu A1 - Pryss, Rüdiger A1 - Kraft, Robin A1 - Schobel, Johannes A1 - Hannemann, Ronny A1 - Langguth, Berthold A1 - Schlee, Winfried A1 - Spiliopoulou, Myra T1 - Interactive system for similarity-based inspection and assessment of the well-being of mHealth users JF - Entropy N2 - Recent digitization technologies empower mHealth users to conveniently record their Ecological Momentary Assessments (EMA) through web applications, smartphones, and wearable devices. These recordings can help clinicians understand how the users' condition changes, but appropriate learning and visualization mechanisms are required for this purpose. We propose a web-based visual analytics tool, which processes clinical data as well as EMAs that were recorded through a mHealth application. The goals we pursue are (1) to predict the condition of the user in the near and the far future, while also identifying the clinical data that mostly contribute to EMA predictions, (2) to identify users with outlier EMA, and (3) to show to what extent the EMAs of a user are in line with or diverge from those users similar to him/her. We report our findings based on a pilot study on patient empowerment, involving tinnitus patients who recorded EMAs with the mHealth app TinnitusTips. To validate our method, we also derived synthetic data from the same pilot study. Based on this setting, results for different use cases are reported. KW - medical analytics KW - condition prediction KW - ecological momentary assessment KW - visual analytics KW - time series Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252333 SN - 1099-4300 VL - 23 IS - 12 ER - TY - JOUR A1 - Kraft, Robin A1 - Birk, Ferdinand A1 - Reichert, Manfred A1 - Deshpande, Aniruddha A1 - Schlee, Winfried A1 - Langguth, Berthold A1 - Baumeister, Harald A1 - Probst, Thomas A1 - Spiliopoulou, Myra A1 - Pryss, Rüdiger T1 - Efficient processing of geospatial mHealth data using a scalable crowdsensing platform JF - Sensors N2 - Smart sensors and smartphones are becoming increasingly prevalent. Both can be used to gather environmental data (e.g., noise). Importantly, these devices can be connected to each other as well as to the Internet to collect large amounts of sensor data, which leads to many new opportunities. In particular, mobile crowdsensing techniques can be used to capture phenomena of common interest. Especially valuable insights can be gained if the collected data are additionally related to the time and place of the measurements. However, many technical solutions still use monolithic backends that are not capable of processing crowdsensing data in a flexible, efficient, and scalable manner. In this work, an architectural design was conceived with the goal to manage geospatial data in challenging crowdsensing healthcare scenarios. It will be shown how the proposed approach can be used to provide users with an interactive map of environmental noise, allowing tinnitus patients and other health-conscious people to avoid locations with harmful sound levels. Technically, the shown approach combines cloud-native applications with Big Data and stream processing concepts. In general, the presented architectural design shall serve as a foundation to implement practical and scalable crowdsensing platforms for various healthcare scenarios beyond the addressed use case. KW - mHealth KW - crowdsensing KW - tinnitus KW - geospatial data KW - cloud-native KW - stream processing KW - scalability KW - architectural design Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-207826 SN - 1424-8220 VL - 20 IS - 12 ER - TY - JOUR A1 - Klemz, Boris A1 - Rote, Günter T1 - Linear-Time Algorithms for Maximum-Weight Induced Matchings and Minimum Chain Covers in Convex Bipartite Graphs JF - Algorithmica N2 - A bipartite graph G=(U,V,E) is convex if the vertices in V can be linearly ordered such that for each vertex u∈U, the neighbors of u are consecutive in the ordering of V. An induced matching H of G is a matching for which no edge of E connects endpoints of two different edges of H. We show that in a convex bipartite graph with n vertices and m weighted edges, an induced matching of maximum total weight can be computed in O(n+m) time. An unweighted convex bipartite graph has a representation of size O(n) that records for each vertex u∈U the first and last neighbor in the ordering of V. Given such a compact representation, we compute an induced matching of maximum cardinality in O(n) time. In convex bipartite graphs, maximum-cardinality induced matchings are dual to minimum chain covers. A chain cover is a covering of the edge set by chain subgraphs, that is, subgraphs that do not contain induced matchings of more than one edge. Given a compact representation, we compute a representation of a minimum chain cover in O(n) time. If no compact representation is given, the cover can be computed in O(n+m) time. All of our algorithms achieve optimal linear running time for the respective problem and model, and they improve and generalize the previous results in several ways: The best algorithms for the unweighted problem versions had a running time of O(n\(^{2}\)) (Brandstädt et al. in Theor. Comput. Sci. 381(1–3):260–265, 2007. https://doi.org/10.1016/j.tcs.2007.04.006). The weighted case has not been considered before. KW - dynamic programming KW - graph algorithm KW - induced matching KW - chain cover KW - convex bipartite graph KW - certifying algorithm Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-267876 SN - 1432-0541 VL - 84 IS - 4 ER -