TY - THES A1 - Geißler, Stefan T1 - Performance Evaluation of Next-Generation Data Plane Architectures and their Components T1 - Leistungsbewertung von Data Plane Architekturen der Nächsten Generation sowie ihrer Einzelkomponenten N2 - In this doctoral thesis we cover the performance evaluation of next generation data plane architectures, comprised of complex software as well as programmable hardware components that allow fine granular configuration. In the scope of the thesis we propose mechanisms to monitor the performance of singular components and model key performance indicators of software based packet processing solutions. We present novel approaches towards network abstraction that allow the integration of heterogeneous data plane technologies into a singular network while maintaining total transparency between control and data plane. Finally, we investigate a full, complex system consisting of multiple software-based solutions and perform a detailed performance analysis. We employ simulative approaches to investigate overload control mechanisms that allow efficient operation under adversary conditions. The contributions of this work build the foundation for future research in the areas of network softwarization and network function virtualization. N2 - Diese Doktorarbeit behandelt die Leistungsbewertung von Data Plane Architekturen der nächsten Generation, die aus komplexen Softwarelösungen sowie programmierbaren Hardwarekomponenten bestehen. Hierbei werden Mechanismen entwickelt, die es ermöglichen, die Leistungsfähigkeit einzelner Komponenten zu messen und zentrale Leistungsindikatoren softwarebasierter Systeme zur Verarbeitung von Datenpaketen zu modellieren. Es werden neuartige Ansätze zur Netzabstraktion entworfen, die eine vollständig transparente Integration heterogener Technologien im selben Netz ermöglichen. Schließlich wird eine umfassende Leistungsbewertung eines komplexen Systems, das aus einer Vielzahl softwarebasierter Netzfunktionen besteht, durchgeführt. Anhand simulativer Modelle werden Überlastkontrollmechanismen entwickelt, die es dem System erlauben auch unter Überlast effizient zu arbeiten. Die Beiträge dieser Arbeit bilden die Grundlage weiterer Forschungen im Bereich der Softwarisierung von Netzen sowie der Virtualisierung von Netzfunktionen. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/21 KW - Leistungsbewertung KW - Simulation KW - Zeitdiskretes System KW - Implementierung KW - performance evaluation KW - simulation KW - discrete-time analysis KW - network softwarization KW - mobile networks Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260157 SN - 1432-8801 ER - TY - JOUR A1 - Kammerer, Klaus A1 - Pryss, Rüdiger A1 - Hoppenstedt, Burkhard A1 - Sommer, Kevin A1 - Reichert, Manfred T1 - Process-driven and flow-based processing of industrial sensor data JF - Sensors N2 - For machine manufacturing companies, besides the production of high quality and reliable machines, requirements have emerged to maintain machine-related aspects through digital services. The development of such services in the field of the Industrial Internet of Things (IIoT) is dealing with solutions such as effective condition monitoring and predictive maintenance. However, appropriate data sources are needed on which digital services can be technically based. As many powerful and cheap sensors have been introduced over the last years, their integration into complex machines is promising for developing digital services for various scenarios. It is apparent that for components handling recorded data of these sensors they must usually deal with large amounts of data. In particular, the labeling of raw sensor data must be furthered by a technical solution. To deal with these data handling challenges in a generic way, a sensor processing pipeline (SPP) was developed, which provides effective methods to capture, process, store, and visualize raw sensor data based on a processing chain. Based on the example of a machine manufacturing company, the SPP approach is presented in this work. For the company involved, the approach has revealed promising results. KW - data stream processing KW - cyber-physical systems KW - processing pipeline KW - sensor networks Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-213089 SN - 1424-8220 VL - 20 IS - 18 ER - TY - JOUR A1 - Wick, Christoph A1 - Hartelt, Alexander A1 - Puppe, Frank T1 - Staff, symbol and melody detection of Medieval manuscripts written in square notation using deep Fully Convolutional Networks JF - Applied Sciences N2 - Even today, the automatic digitisation of scanned documents in general, but especially the automatic optical music recognition (OMR) of historical manuscripts, still remains an enormous challenge, since both handwritten musical symbols and text have to be identified. This paper focuses on the Medieval so-called square notation developed in the 11th–12th century, which is already composed of staff lines, staves, clefs, accidentals, and neumes that are roughly spoken connected single notes. The aim is to develop an algorithm that captures both the neumes, and in particular its melody, which can be used to reconstruct the original writing. Our pipeline is similar to the standard OMR approach and comprises a novel staff line and symbol detection algorithm based on deep Fully Convolutional Networks (FCN), which perform pixel-based predictions for either staff lines or symbols and their respective types. Then, the staff line detection combines the extracted lines to staves and yields an F\(_1\) -score of over 99% for both detecting lines and complete staves. For the music symbol detection, we choose a novel approach that skips the step to identify neumes and instead directly predicts note components (NCs) and their respective affiliation to a neume. Furthermore, the algorithm detects clefs and accidentals. Our algorithm predicts the symbol sequence of a staff with a diplomatic symbol accuracy rate (dSAR) of about 87%, which includes symbol type and location. If only the NCs without their respective connection to a neume, all clefs and accidentals are of interest, the algorithm reaches an harmonic symbol accuracy rate (hSAR) of approximately 90%. In general, the algorithm recognises a symbol in the manuscript with an F\(_1\) -score of over 96%. KW - optical music recognition KW - historical document analysis KW - medieval manuscripts KW - neume notation KW - fully convolutional neural networks Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-197248 SN - 2076-3417 VL - 9 IS - 13 ER - TY - RPRT A1 - Metzger, Florian T1 - Crowdsensed QoE for the community - a concept to make QoE assessment accessible N2 - In recent years several community testbeds as well as participatory sensing platforms have successfully established themselves to provide open data to everyone interested. Each of them with a specific goal in mind, ranging from collecting radio coverage data up to environmental and radiation data. Such data can be used by the community in their decision making, whether to subscribe to a specific mobile phone service that provides good coverage in an area or in finding a sunny and warm region for the summer holidays. However, the existing platforms are usually limiting themselves to directly measurable network QoS. If such a crowdsourced data set provides more in-depth derived measures, this would enable an even better decision making. A community-driven crowdsensing platform that derives spatial application-layer user experience from resource-friendly bandwidth estimates would be such a case, video streaming services come to mind as a prime example. In this paper we present a concept for such a system based on an initial prototype that eases the collection of data necessary to determine mobile-specific QoE at large scale. In addition we reason why the simple quality metric proposed here can hold its own. KW - Quality of Experience KW - Crowdsourcing KW - Crowdsensing KW - QoE Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203748 N1 - Originally written in 2017, but never published. ER - TY - JOUR A1 - Seufert, Anika A1 - Schröder, Svenja A1 - Seufert, Michael T1 - Delivering User Experience over Networks: Towards a Quality of Experience Centered Design Cycle for Improved Design of Networked Applications JF - SN Computer Science N2 - To deliver the best user experience (UX), the human-centered design cycle (HCDC) serves as a well-established guideline to application developers. However, it does not yet cover network-specific requirements, which become increasingly crucial, as most applications deliver experience over the Internet. The missing network-centric view is provided by Quality of Experience (QoE), which could team up with UX towards an improved overall experience. By considering QoE aspects during the development process, it can be achieved that applications become network-aware by design. In this paper, the Quality of Experience Centered Design Cycle (QoE-CDC) is proposed, which provides guidelines on how to design applications with respect to network-specific requirements and QoE. Its practical value is showcased for popular application types and validated by outlining the design of a new smartphone application. We show that combining HCDC and QoE-CDC will result in an application design, which reaches a high UX and avoids QoE degradation. KW - user experience KW - human-centered design KW - design cycle KW - application design KW - quality of experience Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-271762 SN - 2661-8907 VL - 2 IS - 6 ER - TY - JOUR A1 - Krupitzer, Christian A1 - Eberhardinger, Benedikt A1 - Gerostathopoulos, Ilias A1 - Raibulet, Claudia T1 - Introduction to the special issue “Applications in Self-Aware Computing Systems and their Evaluation” JF - Computers N2 - The joint 1st Workshop on Evaluations and Measurements in Self-Aware Computing Systems (EMSAC 2019) and Workshop on Self-Aware Computing (SeAC) was held as part of the FAS* conference alliance in conjunction with the 16th IEEE International Conference on Autonomic Computing (ICAC) and the 13th IEEE International Conference on Self-Adaptive and Self-Organizing Systems (SASO) in Umeå, Sweden on 20 June 2019. The goal of this one-day workshop was to bring together researchers and practitioners from academic environments and from the industry to share their solutions, ideas, visions, and doubts in self-aware computing systems in general and in the evaluation and measurements of such systems in particular. The workshop aimed to enable discussions, partnerships, and collaborations among the participants. This special issue follows the theme of the workshop. It contains extended versions of workshop presentations as well as additional contributions. KW - self-aware computing systems KW - quality evaluation KW - measurements KW - quality assurance KW - autonomous KW - self-adaptive KW - self-managing systems Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-203439 SN - 2073-431X VL - 9 IS - 1 ER - TY - THES A1 - Peng, Dongliang T1 - An Optimization-Based Approach for Continuous Map Generalization T1 - Optimierung für die kontinuierliche Generalisierung von Landkarten N2 - Maps are the main tool to represent geographical information. Geographical information is usually scale-dependent, so users need to have access to maps at different scales. In our digital age, the access is realized by zooming. As discrete changes during the zooming tend to distract users, smooth changes are preferred. This is why some digital maps are trying to make the zooming as continuous as they can. The process of producing maps at different scales with smooth changes is called continuous map generalization. In order to produce maps of high quality, cartographers often take into account additional requirements. These requirements are transferred to models in map generalization. Optimization for map generalization is important not only because it finds optimal solutions in the sense of the models, but also because it helps us to evaluate the quality of the models. Optimization, however, becomes more delicate when we deal with continuous map generalization. In this area, there are requirements not only for a specific map but also for relations between maps at difference scales. This thesis is about continuous map generalization based on optimization. First, we show the background of our research topics. Second, we find optimal sequences for aggregating land-cover areas. We compare the A$^{\!\star}$\xspace algorithm and integer linear programming in completing this task. Third, we continuously generalize county boundaries to provincial boundaries based on compatible triangulations. We morph between the two sets of boundaries, using dynamic programming to compute the correspondence. Fourth, we continuously generalize buildings to built-up areas by aggregating and growing. In this work, we group buildings with the help of a minimum spanning tree. Fifth, we define vertex trajectories that allow us to morph between polylines. We require that both the angles and the edge lengths change linearly over time. As it is impossible to fulfill all of these requirements simultaneously, we mediate between them using least-squares adjustment. Sixth, we discuss the performance of some commonly used data structures for a specific spatial problem. Seventh, we conclude this thesis and present open problems. N2 - Maps are the main tool to represent geographical information. Users often zoom in and out to access maps at different scales. Continuous map generalization tries to make the changes between different scales smooth, which is essential to provide users with comfortable zooming experience. In order to achieve continuous map generalization with high quality, we optimize some important aspects of maps. In this book, we have used optimization in the generalization of land-cover areas, administrative boundaries, buildings, and coastlines. According to our experiments, continuous map generalization indeed benefits from optimization. N2 - Landkarten sind das wichtigste Werkzeug zur Repräsentation geografischer Information. Unter der Generalisierung von Landkarten versteht man die Aufbereitung von geografischen Informationen aus detaillierten Daten zur Generierung von kleinmaßstäbigen Karten. Nutzer von Online-Karten zoomen oft in eine Karte hinein oder aus einer Karte heraus, um mehr Details bzw. mehr Überblick zu bekommen. Die kontinuierliche Generalisierung von Landkarten versucht die Änderungen zwischen verschiedenen Maßstäben stetig zu machen. Dies ist wichtig, um Nutzern eine angenehme Zoom-Erfahrung zu bieten. Um eine qualitativ hochwertige kontinuierliche Generalisierung zu erreichen, kann man wichtige Aspekte bei der Generierung von Online-Karten optimieren. In diesem Buch haben wir Optimierung bei der Generalisierung von Landnutzungskarten, von administrativen Grenzen, Gebäuden und Küstenlinien eingesetzt. Unsere Experimente zeigen, dass die kontinuierliche Generalisierung von Landkarten in der Tat von Optimierung profitiert. KW - land-cover area KW - administrative boundary KW - building KW - morphing KW - data structure KW - zooming KW - Generalisierung KW - Landnutzungskartierung KW - Optimierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174427 SN - 978-3-95826-104-4 SN - 978-3-95826-105-1 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, 978-3-95826-104-4, 24,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - JOUR A1 - Pfitzner, Christian A1 - May, Stefan A1 - Nüchter, Andreas T1 - Body weight estimation for dose-finding and health monitoring of lying, standing and walking patients based on RGB-D data JF - Sensors N2 - This paper describes the estimation of the body weight of a person in front of an RGB-D camera. A survey of different methods for body weight estimation based on depth sensors is given. First, an estimation of people standing in front of a camera is presented. Second, an approach based on a stream of depth images is used to obtain the body weight of a person walking towards a sensor. The algorithm first extracts features from a point cloud and forwards them to an artificial neural network (ANN) to obtain an estimation of body weight. Besides the algorithm for the estimation, this paper further presents an open-access dataset based on measurements from a trauma room in a hospital as well as data from visitors of a public event. In total, the dataset contains 439 measurements. The article illustrates the efficiency of the approach with experiments with persons lying down in a hospital, standing persons, and walking persons. Applicable scenarios for the presented algorithm are body weight-related dosing of emergency patients. KW - RGB-D KW - human body weight KW - image processing KW - kinect KW - machine learning KW - perception KW - segmentation KW - sensor fusion KW - stroke KW - thermal camera Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176642 VL - 18 IS - 5 ER - TY - JOUR A1 - Sîrbu, Alina A1 - Becker, Martin A1 - Caminiti, Saverio A1 - De Baets, Bernard A1 - Elen, Bart A1 - Francis, Louise A1 - Gravino, Pietro A1 - Hotho, Andreas A1 - Ingarra, Stefano A1 - Loreto, Vittorio A1 - Molino, Andrea A1 - Mueller, Juergen A1 - Peters, Jan A1 - Ricchiuti, Ferdinando A1 - Saracino, Fabio A1 - Servedio, Vito D.P. A1 - Stumme, Gerd A1 - Theunis, Jan A1 - Tria, Francesca A1 - Van den Bossche, Joris T1 - Participatory Patterns in an International Air Quality Monitoring Initiative JF - PLoS ONE N2 - The issue of sustainability is at the top of the political and societal agenda, being considered of extreme importance and urgency. Human individual action impacts the environment both locally (e.g., local air/water quality, noise disturbance) and globally (e.g., climate change, resource use). Urban environments represent a crucial example, with an increasing realization that the most effective way of producing a change is involving the citizens themselves in monitoring campaigns (a citizen science bottom-up approach). This is possible by developing novel technologies and IT infrastructures enabling large citizen participation. Here, in the wider framework of one of the first such projects, we show results from an international competition where citizens were involved in mobile air pollution monitoring using low cost sensing devices, combined with a web-based game to monitor perceived levels of pollution. Measures of shift in perceptions over the course of the campaign are provided, together with insights into participatory patterns emerging from this study. Interesting effects related to inertia and to direct involvement in measurement activities rather than indirect information exposure are also highlighted, indicating that direct involvement can enhance learning and environmental awareness. In the future, this could result in better adoption of policies towards decreasing pollution. KW - transport microenvironments KW - exposure KW - pollution KW - carbon Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-151379 VL - 10 IS - 8 ER - TY - THES A1 - Fleszar, Krzysztof T1 - Network-Design Problems in Graphs and on the Plane T1 - Netzwerk-Design-Probleme in Graphen und auf der Ebene N2 - A network design problem defines an infinite set whose elements, called instances, describe relationships and network constraints. It asks for an algorithm that, given an instance of this set, designs a network that respects the given constraints and at the same time optimizes some given criterion. In my thesis, I develop algorithms whose solutions are optimum or close to an optimum value within some guaranteed bound. I also examine the computational complexity of these problems. Problems from two vast areas are considered: graphs and the Euclidean plane. In the Maximum Edge Disjoint Paths problem, we are given a graph and a subset of vertex pairs that are called terminal pairs. We are asked for a set of paths where the endpoints of each path form a terminal pair. The constraint is that any two paths share at most one inner vertex. The optimization criterion is to maximize the cardinality of the set. In the hard-capacitated k-Facility Location problem, we are given an integer k and a complete graph where the distances obey a given metric and where each node has two numerical values: a capacity and an opening cost. We are asked for a subset of k nodes, called facilities, and an assignment of all the nodes, called clients, to the facilities. The constraint is that the number of clients assigned to a facility cannot exceed the facility's capacity value. The optimization criterion is to minimize the total cost which consists of the total opening cost of the facilities and the total distance between the clients and the facilities they are assigned to. In the Stabbing problem, we are given a set of axis-aligned rectangles in the plane. We are asked for a set of horizontal line segments such that, for every rectangle, there is a line segment crossing its left and right edge. The optimization criterion is to minimize the total length of the line segments. In the k-Colored Non-Crossing Euclidean Steiner Forest problem, we are given an integer k and a finite set of points in the plane where each point has one of k colors. For every color, we are asked for a drawing that connects all the points of the same color. The constraint is that drawings of different colors are not allowed to cross each other. The optimization criterion is to minimize the total length of the drawings. In the Minimum Rectilinear Polygon for Given Angle Sequence problem, we are given an angle sequence of left (+90°) turns and right (-90°) turns. We are asked for an axis-parallel simple polygon where the angles of the vertices yield the given sequence when walking around the polygon in counter-clockwise manner. The optimization criteria considered are to minimize the perimeter, the area, and the size of the axis-parallel bounding box of the polygon. N2 - Ein Netzwerk-Design-Problem definiert eine unendliche Menge, deren Elemente, als Instanzen bezeichnet, Beziehungen und Beschränkungen in einem Netzwerk beschreiben. Die Lösung eines solchen Problems besteht aus einem Algorithmus, der auf die Eingabe einer beliebigen Instanz dieser Menge ein Netzwerk entwirft, welches die gegebenen Beschränkungen einhält und gleichzeitig ein gegebenes Kriterium optimiert. In meiner Dissertation habe ich Algorithmen entwickelt, deren Netzwerke stets optimal sind oder nachweisbar nahe am Optimum liegen. Zusätzlich habe ich die Berechnungskomplexität dieser Probleme untersucht. Dabei wurden Probleme aus zwei weiten Gebieten betrachtet: Graphen und der Euklidische Ebene. Im Maximum-Edge-Disjoint-Paths-Problem besteht die Eingabe aus einem Graphen und einer Teilmenge von Knotenpaaren, die wir mit Terminalpaare bezeichnen. Gesucht ist eine Menge von Pfaden, die Terminalpaare verbinden. Die Beschränkung ist, dass keine zwei Pfade einen gleichen inneren Knoten haben dürfen. Das Optimierungskriterium ist die Maximierung der Kardinalität dieser Menge. Im Hard-Capacitated-k-Facility-Location-Problem besteht die Eingabe aus einer Ganzzahl k und einem vollständigen Graphen, in welchem die Distanzen einer gegebenen Metrik unterliegen und in welchem jedem Knoten sowohl eine numerische Kapazität als auch ein Eröffnungskostenwert zugeschrieben ist. Gesucht ist eine Teilmenge von k Knoten, Facilities genannt, und eine Zuweisung aller Knoten, Clients genannt, zu den Facilities. Die Beschränkung ist, dass die Anzahl der Clients, die einer Facility zugewiesen sind, nicht deren Kapazität überschreiten darf. Das Optimierungskriterium ist die Minimierung der Gesamtkosten bestehend aus den Gesamteröffnungskosten der Facilities sowie der Gesamtdistanz zwischen den Clients und den ihnen zugewiesenen Facilities. Im Stabbing-Problem besteht die Eingabe aus einer Menge von achsenparallelen Rechtecken in der Ebene. Gesucht ist eine Menge von horizontalen Geradenstücken mit der Randbedingung, dass die linke und rechte Seite eines jeden Rechtecks von einem Geradenstück verbunden ist. Das Optimierungskriterium ist die Minimierung der Gesamtlänge aller Geradenstücke. Im k-Colored-Non-Crossing-Euclidean-Steiner-Forest-Problem besteht die Eingabe aus einer Ganzzahl k und einer endlichen Menge von Punkten in der Ebene, wobei jeder Punkt in einer von k Farben gefärbt ist. Gesucht ist für jede Farbe eine Zeichnung, in welcher alle Punkte der Farbe verbunden sind. Die Beschränkung ist, dass Zeichnungen verschiedener Farben sich nicht kreuzen dürfen. Das Optimierungskriterium ist die Minimierung des Gesamtintenverbrauchs, das heißt, der Gesamtlänge der Zeichnungen. Im Minimum-Rectilinear-Polygon-for-Given-Angle-Sequence-Problem besteht die Eingabe aus einer Folge von Links- (+90°) und Rechtsabbiegungen (-90°). Gesucht ist ein achsenparalleles Polygon dessen Eckpunkte die gegebene Folge ergeben, wenn man das Polygon gegen den Uhrzeigersinn entlangläuft. Die Optimierungskriterien sind die Minimierung des Umfangs und der inneren Fläche des Polygons sowie der Größe des notwendigen Zeichenblattes, d.h., des kleinsten Rechteckes, das das Polygon einschließt. N2 - Given points in the plane, connect them using minimum ink. Though the task seems simple, it turns out to be very time consuming. In fact, scientists believe that computers cannot efficiently solve it. So, do we have to resign? This book examines such NP-hard network-design problems, from connectivity problems in graphs to polygonal drawing problems on the plane. First, we observe why it is so hard to optimally solve these problems. Then, we go over to attack them anyway. We develop fast algorithms that find approximate solutions that are very close to the optimal ones. Hence, connecting points with slightly more ink is not hard. KW - Euklidische Ebene KW - Algorithmus KW - Komplexität KW - NP-schweres Problem KW - Graph KW - approximation algorithm KW - hardness KW - optimization KW - graphs KW - network KW - Optimierungsproblem KW - Approximationsalgorithmus KW - complexity KW - Euclidean plane Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-154904 SN - 978-3-95826-076-4 (Print) SN - 978-3-95826-077-1 (Online) N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-076-4, 28,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - THES A1 - Wojtkowiak, Harald T1 - Planungssystem zur Steigerung der Autonomie von Kleinstsatelliten T1 - Planningsystem to increase the autonomy of small satellites N2 - Der Betrieb von Satelliten wird sich in Zukunft gravierend ändern. Die bisher ausgeübte konventionelle Vorgehensweise, bei der die Planung der vom Satelliten auszuführenden Aktivitäten sowie die Kontrolle hierüber ausschließlich vom Boden aus erfolgen, stößt bei heutigen Anwendungen an ihre Grenzen. Im schlimmsten Fall verhindert dieser Umstand sogar die Erschließung bisher ungenutzter Möglichkeiten. Der Gewinn eines Satelliten, sei es in Form wissenschaftlicher Daten oder der Vermarktung satellitengestützter Dienste, wird daher nicht optimal ausgeschöpft. Die Ursache für dieses Problem lässt sich im Grunde auf eine ausschlaggebende Tatsache zurückführen: Konventionelle Satelliten können ihr Verhalten, d.h. die Folge ihrer Tätigkeiten, nicht eigenständig anpassen. Stattdessen erstellt das Bedienpersonal am Boden - vor allem die Operatoren - mit Hilfe von Planungssoftware feste Ablaufpläne, die dann in Form von Kommandosequenzen von den Bodenstationen aus an die jeweiligen Satelliten hochgeladen werden. Dort werden die Befehle lediglich überprüft, interpretiert und strikt ausgeführt. Die Abarbeitung erfolgt linear. Situationsbedingte Änderungen, wie sie vergleichsweise bei der Codeausführung von Softwareprogrammen durch Kontrollkonstrukte, zum Beispiel Schleifen und Verzweigungen, üblich sind, sind typischerweise nicht vorgesehen. Der Operator ist daher die einzige Instanz, die das Verhalten des Satelliten mittels Kommandierung, per Upload, beeinflussen kann, und auch nur dann, wenn ein direkter Funkkontakt zwischen Satellit und Bodenstation besteht. Die dadurch möglichen Reaktionszeiten des Satelliten liegen bestenfalls bei einigen Sekunden, falls er sich im Wirkungsbereich der Bodenstation befindet. Außerhalb des Kontaktfensters kann sich die Zeitschranke, gegeben durch den Orbit und die aktuelle Position des Satelliten, von einigen Minuten bis hin zu einigen Stunden erstrecken. Die Signallaufzeiten der Funkübertragung verlängern die Reaktionszeiten um weitere Sekunden im erdnahen Bereich. Im interplanetaren Raum erstrecken sich die Zeitspannen aufgrund der immensen Entfernungen sogar auf mehrere Minuten. Dadurch bedingt liegt die derzeit technologisch mögliche, bodengestützte, Reaktionszeit von Satelliten bestenfalls im Bereich von einigen Sekunden. Diese Einschränkung stellt ein schweres Hindernis für neuartige Satellitenmissionen, bei denen insbesondere nichtdeterministische und kurzzeitige Phänomene (z.B. Blitze und Meteoreintritte in die Erdatmosphäre) Gegenstand der Beobachtungen sind, dar. Die langen Reaktionszeiten des konventionellen Satellitenbetriebs verhindern die Realisierung solcher Missionen, da die verzögerte Reaktion erst erfolgt, nachdem das zu beobachtende Ereignis bereits abgeschlossen ist. Die vorliegende Dissertation zeigt eine Möglichkeit, das durch die langen Reaktionszeiten entstandene Problem zu lösen, auf. Im Zentrum des Lösungsansatzes steht dabei die Autonomie. Im Wesentlichen geht es dabei darum, den Satelliten mit der Fähigkeit auszustatten, sein Verhalten, d.h. die Folge seiner Tätigkeiten, eigenständig zu bestimmen bzw. zu ändern. Dadurch wird die direkte Abhängigkeit des Satelliten vom Operator bei Reaktionen aufgehoben. Im Grunde wird der Satellit in die Lage versetzt, sich selbst zu kommandieren. Die Idee der Autonomie wurde im Rahmen der zugrunde liegenden Forschungsarbeiten umgesetzt. Das Ergebnis ist ein autonomes Planungssystem. Dabei handelt es sich um ein Softwaresystem, mit dem sich autonomes Verhalten im Satelliten realisieren lässt. Es kann an unterschiedliche Satellitenmissionen angepasst werden. Ferner deckt es verschiedene Aspekte des autonomen Satellitenbetriebs, angefangen bei der generellen Entscheidungsfindung der Tätigkeiten, über die zeitliche Ablaufplanung unter Einbeziehung von Randbedingungen (z.B. Ressourcen) bis hin zur eigentlichen Ausführung, d.h. Kommandierung, ab. Das Planungssystem kommt als Anwendung in ASAP, einer autonomen Sensorplattform, zum Einsatz. Es ist ein optisches System und dient der Detektion von kurzzeitigen Phänomenen und Ereignissen in der Erdatmosphäre. Die Forschungsarbeiten an dem autonomen Planungssystem, an ASAP sowie an anderen zu diesen in Bezug stehenden Systemen wurden an der Professur für Raumfahrttechnik des Lehrstuhls Informatik VIII der Julius-Maximilians-Universität Würzburg durchgeführt. N2 - Satellite operation will change thoroughly in future. So far the currently performed conventional approach of controlling satellites is hitting its limitation by todays application. This is due to the fact that activities of the satellite are planned and controlled exclusively by ground infrastructure. In the worst case this circumstance prevents the exploitation of potential but so far unused opportunities. Thus the yield of satellites, may it be in the form of scientific research data or the commercialization of satellite services, is not optimized. After all the cause of this problem can be tracked back to one crucial matter: Conventional satellites are not able to alter their behaviour, i.e. the order of their actions, themselves. Instead schedules are created by ground staff – mainly operators - utilizing specialized planning software. The output is then transformed into command sequences and uploaded to the dedicated satellite via ground stations. On-board the commands are solely checked, interpreted and strictly executed. The flow is linear. Situational changes, like in the code execution of software programs via control constructs, e.g. loops and branches, are typically not present. Thus the operator is the only instance which is able to change the behaviour of the satellite via command upload. Therefore a direct radio link between satellite and ground station is required. Reaction times are hereby restricted. In the best case, means when the satellite is inside the area of effect, the limitations are to a few seconds. Outside the contact window, the time bound may increase from minutes to hours. The exact timing are dependant from the orbit of the satellite and its position on it. The signal flow of the radio links adds additional reaction time from a few seconds in near earth up to some minutes in interplanetary space due to the vast distances. In sum the best achievable ground based reaction time lies in the area of some seconds. This restriction is a severe handicap for novel satellite missions with focus on non-deterministic and short-time phenomena, e.g. lightning and meteor entries into Earth atmosphere. The long reaction times of conventional satellite operations prevent the realization of such missions. This is due to the fact that delayed reactions take place after the event to observe has finished. This dissertation shows a possibility to solve the problem caused by long reaction times. Autonomy lies in the centre of the main approach. The key is to augment the satellite with the ability to alter its behaviour, i.e. the sequence of its actions, and to deliberate about it. Thus, the direct reaction dependency of the satellite from operators will be lifted. In principle the satellite will be able to command itself. The herein idea of autonomy is based on research work, which provides the context for design and implementation. The output is an autonomous planning system. It’s a software system which enables a satellite to behave autonomously and can be adapted to different types of satellite missions. Additionally, it covers different aspects of autonomous satellite operation, starting with general decision making of activities, going over to time scheduling inclusive constraint consideration, e.g. resources, and finishing at last with the actual execution, i.e. commanding. The autonomous planning system runs as one application of ASAP, an autonomous sensor platform. It is an optical system with the purpose to detect short-time phenomena and events in Earth atmosphere. The research work for the autonomous planning system, for ASAP and for other related systems has been executed at the professorship for space technology which is part of the department for computer science VIII at the Julius-Maximilians-Universität Würzburg. KW - Planungssystem KW - Autonomie KW - Satellit KW - Entscheidungsfindung KW - Ablaufplanung KW - Planausführung KW - System KW - Missionsbetrieb KW - decission finding KW - scheduling KW - plan execution KW - system KW - mission operation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-163569 ER - TY - JOUR A1 - Kaiser, Dennis A1 - Lesch, Veronika A1 - Rothe, Julian A1 - Strohmeier, Michael A1 - Spieß, Florian A1 - Krupitzer, Christian A1 - Montenegro, Sergio A1 - Kounev, Samuel T1 - Towards Self-Aware Multirotor Formations JF - Computers N2 - In the present day, unmanned aerial vehicles become seemingly more popular every year, but, without regulation of the increasing number of these vehicles, the air space could become chaotic and uncontrollable. In this work, a framework is proposed to combine self-aware computing with multirotor formations to address this problem. The self-awareness is envisioned to improve the dynamic behavior of multirotors. The formation scheme that is implemented is called platooning, which arranges vehicles in a string behind the lead vehicle and is proposed to bring order into chaotic air space. Since multirotors define a general category of unmanned aerial vehicles, the focus of this thesis are quadcopters, platforms with four rotors. A modification for the LRA-M self-awareness loop is proposed and named Platooning Awareness. The implemented framework is able to offer two flight modes that enable waypoint following and the self-awareness module to find a path through scenarios, where obstacles are present on the way, onto a goal position. The evaluation of this work shows that the proposed framework is able to use self-awareness to learn about its environment, avoid obstacles, and can successfully move a platoon of drones through multiple scenarios. KW - self-aware computing KW - unmanned aerial vehicles KW - multirotors KW - quadcopters KW - intelligent transportation systems Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200572 SN - 2073-431X VL - 9 IS - 1 ER - TY - JOUR A1 - Grohmann, Johannes A1 - Herbst, Nikolas A1 - Chalbani, Avi A1 - Arian, Yair A1 - Peretz, Noam A1 - Kounev, Samuel T1 - A Taxonomy of Techniques for SLO Failure Prediction in Software Systems JF - Computers N2 - Failure prediction is an important aspect of self-aware computing systems. Therefore, a multitude of different approaches has been proposed in the literature over the past few years. In this work, we propose a taxonomy for organizing works focusing on the prediction of Service Level Objective (SLO) failures. Our taxonomy classifies related work along the dimensions of the prediction target (e.g., anomaly detection, performance prediction, or failure prediction), the time horizon (e.g., detection or prediction, online or offline application), and the applied modeling type (e.g., time series forecasting, machine learning, or queueing theory). The classification is derived based on a systematic mapping of relevant papers in the area. Additionally, we give an overview of different techniques in each sub-group and address remaining challenges in order to guide future research. KW - taxonomy KW - survey KW - failure prediction KW - anomaly prediction KW - anomaly detection KW - self-aware computing KW - self-adaptive systems KW - performance prediction Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-200594 SN - 2073-431X VL - 9 IS - 1 ER - TY - JOUR A1 - Oberdörfer, Sebastian A1 - Latoschik, Marc Erich T1 - Knowledge encoding in game mechanics: transfer-oriented knowledge learning in desktop-3D and VR JF - International Journal of Computer Games Technology N2 - Affine Transformations (ATs) are a complex and abstract learning content. Encoding the AT knowledge in Game Mechanics (GMs) achieves a repetitive knowledge application and audiovisual demonstration. Playing a serious game providing these GMs leads to motivating and effective knowledge learning. Using immersive Virtual Reality (VR) has the potential to even further increase the serious game’s learning outcome and learning quality. This paper compares the effectiveness and efficiency of desktop-3D and VR in respect to the achieved learning outcome. Also, the present study analyzes the effectiveness of an enhanced audiovisual knowledge encoding and the provision of a debriefing system. The results validate the effectiveness of the knowledge encoding in GMs to achieve knowledge learning. The study also indicates that VR is beneficial for the overall learning quality and that an enhanced audiovisual encoding has only a limited effect on the learning outcome. KW - games Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-201159 VL - 2019 ER - TY - THES A1 - Baier, Pablo A. T1 - Simulator for Minimally Invasive Vascular Interventions: Hardware and Software T1 - VR-Simulation für das Training von Herzkathetereingriffen: Hard- und Softwarelösung N2 - A complete simulation system is proposed that can be used as an educational tool by physicians in training basic skills of Minimally Invasive Vascular Interventions. In the first part, a surface model is developed to assemble arteries having a planar segmentation. It is based on Sweep Surfaces and can be extended to T- and Y-like bifurcations. A continuous force vector field is described, representing the interaction between the catheter and the surface. The computation time of the force field is almost unaffected when the resolution of the artery is increased. The mechanical properties of arteries play an essential role in the study of the circulatory system dynamics, which has been becoming increasingly important in the treatment of cardiovascular diseases. In Virtual Reality Simulators, it is crucial to have a tissue model that responds in real time. In this work, the arteries are discretized by a two dimensional mesh and the nodes are connected by three kinds of linear springs. Three tissue layers (Intima, Media, Adventitia) are considered and, starting from the stretch-energy density, some of the elasticity tensor components are calculated. The physical model linearizes and homogenizes the material response, but it still contemplates the geometric nonlinearity. In general, if the arterial stretch varies by 1% or less, then the agreement between the linear and nonlinear models is trustworthy. In the last part, the physical model of the wire proposed by Konings is improved. As a result, a simpler and more stable method is obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. The physical and the geometrical methods are merged, resulting in efficient relaxations. Tests show that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions and the hardware to assemble the simulator has a low cost. N2 - Es wird ein vollständiges Simulationssystem entwickelt, das von Ärzten als Lehrmittel zur Ausbildung grundlegender Fertigkeiten bei Herzkathetereingriffen eingesetzt werden kann. Im ersten Teil wird ein Oberflächenmodell zur Erstellung von Arterien mit planarer Segmentierung entwickelt. Im zweiten Teil werden die Arterien durch ein zweidimensionales Netz diskretisiert, die Knoten werden durch drei Arten linearer Federn verbunden und ausgehend von einer Dehnungsenergie-Dichte-Funktion werden einige Komponenten des Elastizitätstensors berechnet. Im letzten Teil wird das von anderen Autoren vorgeschlagene physikalische Modell des Drahtes verbessert und eine neue geometrische Methode entwickelt. Der vorgeschlagene Algorithmus ermöglicht Echtzeit-Ausführungen. Die Hardware des Simulators hat geringe Herstellungskosten. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 15 KW - Computersimulation KW - Simulator KW - Arterie KW - Elastizitätstensor KW - Herzkatheter KW - Minimally invasive vascular intervention KW - Wire relaxation KW - Artery KW - Elasticity tensor KW - Stiffness KW - educational tool KW - Elastizitätstensor KW - Herzkathetereingriff KW - Software KW - Hardware Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-161190 SN - 978-3-945459-22-5 ER - TY - CHAP ED - von Mammen, Sebastian ED - Klemke, Roland ED - Lorber, Martin T1 - Proceedings of the 1st Games Technology Summit BT - part of Clash of Realites 11th International Conference on the Technology and Theory of Digital Games N2 - As part of the Clash of Realities International Conference on the Technology and Theory of Digital Games, the Game Technology Summit is a premium venue to bring together experts from academia and industry to disseminate state-of-the-art research on trending technology topics in digital games. In this first iteration of the Game Technology Summit, we specifically paid attention on how the successes in AI in Natural User Interfaces have been impacting the games industry (industry track) and which scientific, state-of-the-art ideas and approaches are currently pursued (scientific track). KW - Veranstaltung KW - Künstliche Intelligenz KW - Mensch-Maschine-Kommunikation KW - Computerspiel KW - natural user interfaces KW - artificial intelligence Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-245776 SN - 978-3-945459-36-2 ER - TY - JOUR A1 - Du, Shitong A1 - Lauterbach, Helge A. A1 - Li, Xuyou A1 - Demisse, Girum G. A1 - Borrmann, Dorit A1 - Nüchter, Andreas T1 - Curvefusion — A Method for Combining Estimated Trajectories with Applications to SLAM and Time-Calibration JF - Sensors N2 - Mapping and localization of mobile robots in an unknown environment are essential for most high-level operations like autonomous navigation or exploration. This paper presents a novel approach for combining estimated trajectories, namely curvefusion. The robot used in the experiments is equipped with a horizontally mounted 2D profiler, a constantly spinning 3D laser scanner and a GPS module. The proposed algorithm first combines trajectories from different sensors to optimize poses of the planar three degrees of freedom (DoF) trajectory, which is then fed into continuous-time simultaneous localization and mapping (SLAM) to further improve the trajectory. While state-of-the-art multi-sensor fusion methods mainly focus on probabilistic methods, our approach instead adopts a deformation-based method to optimize poses. To this end, a similarity metric for curved shapes is introduced into the robotics community to fuse the estimated trajectories. Additionally, a shape-based point correspondence estimation method is applied to the multi-sensor time calibration. Experiments show that the proposed fusion method can achieve relatively better accuracy, even if the error of the trajectory before fusion is large, which demonstrates that our method can still maintain a certain degree of accuracy in an environment where typical pose estimation methods have poor performance. In addition, the proposed time-calibration method also achieves high accuracy in estimating point correspondences. KW - mapping KW - continuous-time SLAM KW - deformation-based method KW - time calibration Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-219988 SN - 1424-8220 VL - 20 IS - 23 ER - TY - JOUR A1 - Glémarec, Yann A1 - Lugrin, Jean-Luc A1 - Bosser, Anne-Gwenn A1 - Buche, Cédric A1 - Latoschik, Marc Erich T1 - Controlling the stage: a high-level control system for virtual audiences in Virtual Reality JF - Frontiers in Virtual Reality N2 - This article presents a novel method for controlling a virtual audience system (VAS) in Virtual Reality (VR) application, called STAGE, which has been originally designed for supervised public speaking training in university seminars dedicated to the preparation and delivery of scientific talks. We are interested in creating pedagogical narratives: narratives encompass affective phenomenon and rather than organizing events changing the course of a training scenario, pedagogical plans using our system focus on organizing the affects it arouses for the trainees. Efficiently controlling a virtual audience towards a specific training objective while evaluating the speaker’s performance presents a challenge for a seminar instructor: the high level of cognitive and physical demands required to be able to control the virtual audience, whilst evaluating speaker’s performance, adjusting and allowing it to quickly react to the user’s behaviors and interactions. It is indeed a critical limitation of a number of existing systems that they rely on a Wizard of Oz approach, where the tutor drives the audience in reaction to the user’s performance. We address this problem by integrating with a VAS a high-level control component for tutors, which allows using predefined audience behavior rules, defining custom ones, as well as intervening during run-time for finer control of the unfolding of the pedagogical plan. At its core, this component offers a tool to program, select, modify and monitor interactive training narratives using a high-level representation. The STAGE offers the following features: i) a high-level API to program pedagogical narratives focusing on a specific public speaking situation and training objectives, ii) an interactive visualization interface iii) computation and visualization of user metrics, iv) a semi-autonomous virtual audience composed of virtual spectators with automatic reactions to the speaker and surrounding spectators while following the pedagogical plan V) and the possibility for the instructor to embody a virtual spectator to ask questions or guide the speaker from within the Virtual Environment. We present here the design, and implementation of the tutoring system and its integration in STAGE, and discuss its reception by end-users. KW - virtual reality KW - virtual agent KW - behavior perception KW - public speaking KW - education Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-284601 SN - 2673-4192 VL - 3 ER - TY - THES A1 - Löffler, Andre T1 - Constrained Graph Layouts: Vertices on the Outer Face and on the Integer Grid T1 - Graphzeichnen unter Nebenbedingungen: Knoten auf der Außenfacette und mit ganzzahligen Koordinaten N2 - Constraining graph layouts - that is, restricting the placement of vertices and the routing of edges to obey certain constraints - is common practice in graph drawing. In this book, we discuss algorithmic results on two different restriction types: placing vertices on the outer face and on the integer grid. For the first type, we look into the outer k-planar and outer k-quasi-planar graphs, as well as giving a linear-time algorithm to recognize full and closed outer k-planar graphs Monadic Second-order Logic. For the second type, we consider the problem of transferring a given planar drawing onto the integer grid while perserving the original drawings topology; we also generalize a variant of Cauchy's rigidity theorem for orthogonal polyhedra of genus 0 to those of arbitrary genus. N2 - Das Einschränken von Zeichnungen von Graphen, sodass diese bestimmte Nebenbedingungen erfüllen - etwa solche, die das Platzieren von Knoten oder den Verlauf von Kanten beeinflussen - sind im Graphzeichnen allgegenwärtig. In dieser Arbeit befassen wir uns mit algorithmischen Resultaten zu zwei speziellen Einschränkungen, nämlich dem Platzieren von Knoten entweder auf der Außenfacette oder auf ganzzahligen Koordinaten. Für die erste Einschränkung untersuchen wir die außen k-planaren und außen k-quasi-planaren Graphen und geben einen auf monadische Prädikatenlogik zweiter Stufe basierenden Algorithmus an, der überprüft, ob ein Graph voll außen k-planar ist. Für die zweite Einschränkung untersuchen wir das Problem, eine gegebene planare Zeichnung eines Graphen auf das ganzzahlige Koordinatengitter zu transportieren, ohne dabei die Topologie der Zeichnung zu verändern; außerdem generalisieren wir eine Variante von Cauchys Starrheitssatz für orthogonale Polyeder von Geschlecht 0 auf solche von beliebigem Geschlecht. KW - Graphenzeichnen KW - Komplexität KW - Algorithmus KW - Algorithmische Geometrie KW - Kombinatorik KW - Planare Graphen KW - Polyeder KW - Konvexe Zeichnungen Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-215746 SN - 978-3-95826-146-4 SN - 978-3-95826-147-1 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, ISBN 978-3-95826-146-4, 32,90 EUR PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - JOUR A1 - Linsenmann, Thomas A1 - März, Alexander A1 - Dufner, Vera A1 - Stetter, Christian A1 - Weiland, Judith A1 - Westermaier, Thomas T1 - Optimization of radiation settings for angiography using 3D fluoroscopy for imaging of intracranial aneurysms JF - Computer Assisted Surgery N2 - Mobile 3D fluoroscopes have become increasingly available in neurosurgical operating rooms. We recently reported its use for imaging cerebral vascular malformations and aneurysms. This study was conducted to evaluate various radiation settings for the imaging of cerebral aneurysms before and after surgical occlusion. Eighteen patients with cerebral aneurysms with the indication for surgical clipping were included in this prospective analysis. Before surgery the patients were randomized into one of three different scan protocols according (default settings of the 3D fluoroscope): Group 1: 110 kV, 80 mA (enhanced cranial mode), group 2: 120 kV, 64 mA (lumbar spine mode), group 3: 120 kV, 25 mA (head/neck settings). Prior to surgery, a rotational fluoroscopy scan (duration 24 s) was performed without contrast agent followed by another scan with 50 ml of intravenous iodine contrast agent. The image files of both scans were transferred to an Apple PowerMac(R) workstation, subtracted and reconstructed using OsiriX(R) MD 10.0 software. The procedure was repeated after clip placement. The image quality regarding preoperative aneurysm configuration and postoperative assessment of aneurysm occlusion and vessel patency was analyzed by 2 independent reviewers using a 6-grade scale. This technique quickly supplies images of adequate quality to depict intracranial aneurysms and distal vessel patency after aneurysm clipping. Regarding these features, a further optimization to our previous protocol seems possible lowering the voltage and increasing tube current. For quick intraoperative assessment, image subtraction seems not necessary. Thus, a native scan without a contrast agent is not necessary. Further optimization may be possible using a different contrast injection protocol. KW - 3D fluoroscopy KW - aneurysm KW - fluoroscopy KW - intraoperative imaging Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-259251 VL - 26 IS - 1 ER -