TY - THES A1 - Schlosser, Daniel T1 - Quality of Experience Management in Virtual Future Networks T1 - Netzwerkmanagement unter Berücksichtigung der vom Benutzer erfahrenen Dienstgüte in virtuellen zukünftigen Netzen N2 - Aktuell beobachten wir eine drastische Vervielfältigung der Dienste und Anwendungen, die das Internet für den Datentransport nutzen. Dabei unterscheiden sich die Anforderungen dieser Dienste an das Netzwerk deutlich. Das Netzwerkmanagement wird durch diese Diversität der nutzenden Dienste aber deutlich erschwert, da es einem Datentransportdienstleister kaum möglich ist, die unterschiedlichen Verbindungen zu unterscheiden, ohne den Inhalt der transportierten Daten zu analysieren. Netzwerkvirtualisierung ist eine vielversprechende Lösung für dieses Problem, da sie es ermöglicht für verschiedene Dienste unterschiedliche virtuelle Netze auf dem gleichen physikalischen Substrat zu betreiben. Diese Diensttrennung ermöglicht es, jedes einzelne Netz anwendungsspezifisch zu steuern. Ziel einer solchen Netzsteuerung ist es, sowohl die vom Nutzer erfahrene Dienstgüte als auch die Kosteneffizienz des Datentransports zu optimieren. Darüber hinaus wird es mit Netzwerkvirtualisierung möglich das physikalische Netz so weit zu abstrahieren, dass die aktuell fest verzahnten Rollen von Netzwerkbesitzer und Netzwerkbetreiber entkoppelt werden können. Darüber hinaus stellt Netzwerkvirtualisierung sicher, dass unterschiedliche Datennetze, die gleichzeitig auf dem gleichen physikalischen Netz betrieben werden, sich gegenseitig weder beeinflussen noch stören können. Diese Arbeit  beschäftigt sich mit ausgewählten Aspekten dieses Themenkomplexes und fokussiert sich darauf, ein virtuelles Netzwerk mit bestmöglicher Dienstqualität für den Nutzer zu betreiben und zu steuern. Dafür wird ein Top-down-Ansatz gewählt, der von den Anwendungsfällen, einer möglichen Netzwerkvirtualisierungs-Architektur und aktuellen Möglichkeiten der Hardwarevirtualisierung ausgeht. Im Weiteren fokussiert sich die Arbeit dann in Richtung Bestimmung und Optimierung der vom Nutzer erfahrenen Dienstqualität (QoE) auf Applikationsschicht und diskutiert Möglichkeiten zur Messung und Überwachung von wesentlichen Netzparametern in virtualisierten Netzen. N2 - Currently, we observe a strong growth of services and applications, which use the Internet for data transport. However, the network requirements of these applications differ significantly. This makes network management difficult, since it complicated to separate network flows into application classes without inspecting application layer data. Network virtualization is a promising solution to this problem. It enables running different virtual network on the same physical substrate. Separating networks based on the service supported within allows controlling each network according to the specific needs of the application. The aim of such a network control is to optimize the user perceived quality as well as the cost efficiency of the data transport. Furthermore, network virtualization abstracts the network functionality from the underlying implementation and facilitates the split of the currently tightly integrated roles of Internet Service Provider and network owner. Additionally, network virtualization guarantees that different virtual networks run on the same physical substrate do not interfere with each other. This thesis discusses different aspects of the network virtualization topic. It is focused on how to manage and control a virtual network to guarantee the best Quality of Experience for the user. Therefore, a top-down approach is chosen. Starting with use cases of virtual networks, a possible architecture is derived and current implementation options based on hardware virtualization are explored. In the following, this thesis focuses on assessing the Quality of Experience perceived by the user and how it can be optimized on application layer. Furthermore, options for measuring and monitoring significant network parameters of virtual networks are considered. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/12 KW - Netzwerkmanagement KW - Dienstgüte KW - Netzwerkvirtualisierung KW - QoS KW - QoE KW - Network Virtualization KW - Quality of Experience KW - Network Management KW - Quality of Service Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-69986 ER - TY - JOUR A1 - Scherer, Marc A1 - Fleishman, Sarel J. A1 - Jones, Patrik R. A1 - Dandekar, Thomas A1 - Bencurova, Elena T1 - Computational Enzyme Engineering Pipelines for Optimized Production of Renewable Chemicals JF - Frontiers in Bioengineering and Biotechnology N2 - To enable a sustainable supply of chemicals, novel biotechnological solutions are required that replace the reliance on fossil resources. One potential solution is to utilize tailored biosynthetic modules for the metabolic conversion of CO2 or organic waste to chemicals and fuel by microorganisms. Currently, it is challenging to commercialize biotechnological processes for renewable chemical biomanufacturing because of a lack of highly active and specific biocatalysts. As experimental methods to engineer biocatalysts are time- and cost-intensive, it is important to establish efficient and reliable computational tools that can speed up the identification or optimization of selective, highly active, and stable enzyme variants for utilization in the biotechnological industry. Here, we review and suggest combinations of effective state-of-the-art software and online tools available for computational enzyme engineering pipelines to optimize metabolic pathways for the biosynthesis of renewable chemicals. Using examples relevant for biotechnology, we explain the underlying principles of enzyme engineering and design and illuminate future directions for automated optimization of biocatalysts for the assembly of synthetic metabolic pathways. KW - computational KW - enzyme KW - engineering KW - design KW - biomanufacturing KW - biofuel KW - microbes KW - metabolism Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240598 SN - 2296-4185 VL - 9 ER - TY - RPRT A1 - Savvidis, Dimitrios A1 - Roth, Robert A1 - Tutsch, Dietmar T1 - Static Evaluation of a Wheel-Topology for an SDN-based Network Usecase T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - The increased occurrence of Software-Defined-Networking (SDN) not only improves the dynamics and maintenance of network architectures, but also opens up new use cases and application possibilities. Based on these observations, we propose a new network topology consisting of a star and a ring topology. This hybrid topology will be called wheel topology in this paper. We have considered the static characteristics of the wheel topology and compare them with known other topologies. KW - Datennetz KW - SDN KW - topology KW - wheel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280715 ER - TY - THES A1 - Sauer, Markus T1 - Mixed-Reality for Enhanced Robot Teleoperation T1 - Mixed-Reality zur verbesserten Fernbedienung von Robotern N2 - In den letzten Jahren ist die Forschung in der Robotik soweit fortgeschritten, dass die Mensch-Maschine Schnittstelle zunehmend die kritischste Komponente für eine hohe Gesamtperformanz von Systemen zur Navigation und Koordination von Robotern wird. In dieser Dissertation wird untersucht wie Mixed-Reality Technologien für Nutzerschnittstellen genutzt werden können, um diese Gesamtperformanz zu erhöhen. Hierzu werden Konzepte und Technologien entwickelt, die durch Evaluierung mit Nutzertest ein optimiertes und anwenderbezogenes Design von Mixed-Reality Nutzerschnittstellen ermöglichen. Er werden somit sowohl die technische Anforderungen als auch die menschlichen Faktoren für ein konsistentes Systemdesign berücksichtigt. Nach einer detaillierten Problemanalyse und der Erstellung eines Systemmodels, das den Menschen als Schlüsselkomponente mit einbezieht, wird zunächst die Anwendung der neuartigen 3D-Time-of-Flight Kamera zur Navigation von Robotern, aber auch für den Einsatz in Mixed-Reality Schnittstellen analysiert und optimiert. Weiterhin wird gezeigt, wie sich der Netzwerkverkehr des Videostroms als wichtigstes Informationselement der meisten Nutzerschnittstellen für die Navigationsaufgabe auf der Netzwerk Applikationsebene in typischen Multi-Roboter Netzwerken mit dynamischen Topologien und Lastsituation optimieren lässt. Hierdurch ist es möglich in sonst in sonst typischen Ausfallszenarien den Videostrom zu erhalten und die Bildrate zu stabilisieren. Diese fortgeschrittenen Technologien werden dann auch dem entwickelten Konzept der generischen 3D Mixed Reality Schnittselle eingesetzt. Dieses Konzept ermöglicht eine integrierte 3D Darstellung der verfügbaren Information, so dass räumliche Beziehungen von Informationen aufrechterhalten werden und somit die Anzahl der mentalen Transformationen beim menschlichen Bediener reduziert wird. Gleichzeitig werden durch diesen Ansatz auch immersive Stereo Anzeigetechnologien unterstützt, welche zusätzlich das räumliche Verständnis der entfernten Situation fördern. Die in der Dissertation vorgestellten und evaluierten Ansätze nutzen auch die Tatsache, dass sich eine lokale Autonomie von Robotern heute sehr robust realisieren lässt. Dies wird zum Beispiel zur Realisierung eines Assistenzsystems mit variabler Autonomie eingesetzt. Hierbei erhält der Fernbediener über eine Kraftrückkopplung kombiniert mit einer integrierten Augmented Reality Schnittstelle, einen Eindruck über die Situation am entfernten Arbeitsbereich, aber auch über die aktuelle Navigationsintention des Roboters. Die durchgeführten Nutzertests belegen die signifikante Steigerung der Navigationsperformanz durch den entwickelten Ansatz. Die robuste lokale Autonomie ermöglicht auch den in der Dissertation eingeführten Ansatz der prädiktiven Mixed-Reality Schnittstelle. Die durch diesen Ansatz entkoppelte Regelschleife über den Menschen ermöglicht es die Sichtbarkeit von unvermeidbaren Systemverzögerungen signifikant zu reduzieren. Zusätzlich können durch diesen Ansatz beide für die Navigation hilfreichen Blickwinkel in einer 3D-Nutzerschnittstelle kombiniert werden – der exozentrische Blickwinkel und der egozentrische Blickwinkel als Augmented Reality Sicht. N2 - With the progress in robotics research the human machine interfaces reach more and more the status of being the major limiting factor for the overall system performance of a system for remote navigation and coordination of robots. In this monograph it is elaborated how mixed reality technologies can be applied for the user interfaces in order to increase the overall system performance. Concepts, technologies, and frameworks are developed and evaluated in user studies which enable for novel user-centered approaches to the design of mixed-reality user interfaces for remote robot operation. Both the technological requirements and the human factors are considered to achieve a consistent system design. Novel technologies like 3D time-of-flight cameras are investigated for the application in the navigation tasks and for the application in the developed concept of a generic mixed reality user interface. In addition it is shown how the network traffic of a video stream can be shaped on application layer in order to reach a stable frame rate in dynamic networks. The elaborated generic mixed reality framework enables an integrated 3D graphical user interface. The realized spatial integration and visualization of available information reduces the demand for mental transformations for the human operator and supports the use of immersive stereo devices. The developed concepts make also use of the fact that local robust autonomy components can be realized and thus can be incorporated as assistance systems for the human operators. A sliding autonomy concept is introduced combining force and visual augmented reality feedback. The force feedback component allows rendering the robot's current navigation intention to the human operator, such that a real sliding autonomy with seamless transitions is achieved. The user-studies prove the significant increase in navigation performance by application of this concept. The generic mixed reality user interface together with robust local autonomy enables a further extension of the teleoperation system to a short-term predictive mixed reality user interface. With the presented concept of operation, it is possible to significantly reduce the visibility of system delays for the human operator. In addition, both advantageous characteristics of a 3D graphical user interface for robot teleoperation- an exocentric view and an augmented reality view – can be combined. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 5 KW - Mobiler Roboter KW - Autonomer Roboter KW - Mensch-Maschine-Schnittstelle KW - Mixed Reality KW - Mensch-Roboter-Interaktion KW - Teleoperation KW - Benutzerschnittstelle KW - Robotik KW - Mensch-Maschine-System KW - Human-Robot-Interaction KW - Teleoperation KW - User Interface Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55083 SN - 978-3-923959-67-9 ER - TY - THES A1 - Saska, Martin T1 - Trajectory planning and optimal control for formations of autonomous robots T1 - Die Bahnplanung und die optimale Steuerung für Formationen der autonomen Roboter N2 - In this thesis, we present novel approaches for formation driving of nonholonomic robots and optimal trajectory planning to reach a target region. The methods consider a static known map of the environment as well as unknown and dynamic obstacles detected by sensors of the formation. The algorithms are based on leader following techniques, where the formation of car-like robots is maintained in a shape determined by curvilinear coordinates. Beyond this, the general methods of formation driving are specialized and extended for an application of airport snow shoveling. Detailed descriptions of the algorithms complemented by relevant stability and convergence studies will be provided in the following chapters. Furthermore, discussions of the applicability will be verified by various simulations in existing robotic environments and also by a hardware experiment. N2 - In dieser Arbeit präsentieren wir neuartige Algorithmen für die Steuerung der Formationen der nichtholonomen Roboter und ihre optimale Bahnplanung. Die Algorithmen beruhen auf "leader-follower" Techniken. Die Formationen der "car-like" Roboter sind in einer bestimmten Form von "curvilinear" Koordinaten gehalten. Die Steuerungmethoden der Formationen sind spezialisiert und erweitert um ihre Anwendung auf das Flughafenschneeschaufeln. In dieser Arbeit werden die detaillierten Beschreibungen der Algorithmen durch entsprechende Stabilität- und Konvergenz-Studien gestellt. Ihre Anwendbarkeit wird durch verschiedene Simulationen und eine Hardware-Experiment überprüft. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 3 KW - Autonomer Roboter KW - Mobiler Roboter KW - Optimale Kontrolle KW - Formation KW - Steuerung KW - formation driving KW - mobile robots KW - snow shoveling KW - receding horizon control KW - model predictive control KW - trajectory planning Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-53175 SN - 978-3-923959-56-3 ER - TY - CHAP A1 - Sanusi, Khaleel Asyraaf Mat A1 - Klemke, Roland T1 - Immersive Multimodal Environments for Psychomotor Skills Training T2 - Proceedings of the 1st Games Technology Summit N2 - Modern immersive multimodal technologies enable the learners to completely get immersed in various learning situations in a way that feels like experiencing an authentic learning environment. These environments also allow the collection of multimodal data, which can be used with artificial intelligence to further improve the immersion and learning outcomes. The use of artificial intelligence has been widely explored for the interpretation of multimodal data collected from multiple sensors, thus giving insights to support learners’ performance by providing personalised feedback. In this paper, we present a conceptual approach for creating immersive learning environments, integrated with multi-sensor setup to help learners improve their psychomotor skills in a remote setting. KW - immersive learning technologies KW - multimodal learning KW - sensor devices KW - artificial intelligence KW - psychomotor training Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-246016 ER - TY - RPRT A1 - Rossi, Angelo Pio A1 - Maurelli, Francesco A1 - Unnithan, Vikram A1 - Dreger, Hendrik A1 - Mathewos, Kedus A1 - Pradhan, Nayan A1 - Corbeanu, Dan-Andrei A1 - Pozzobon, Riccardo A1 - Massironi, Matteo A1 - Ferrari, Sabrina A1 - Pernechele, Claudia A1 - Paoletti, Lorenzo A1 - Simioni, Emanuele A1 - Maurizio, Pajola A1 - Santagata, Tommaso A1 - Borrmann, Dorit A1 - Nüchter, Andreas A1 - Bredenbeck, Anton A1 - Zevering, Jasper A1 - Arzberger, Fabian A1 - Reyes Mantilla, Camilo Andrés T1 - DAEDALUS - Descent And Exploration in Deep Autonomy of Lava Underground Structures BT - Open Space Innovation Platform (OSIP) Lunar Caves-System Study N2 - The DAEDALUS mission concept aims at exploring and characterising the entrance and initial part of Lunar lava tubes within a compact, tightly integrated spherical robotic device, with a complementary payload set and autonomous capabilities. The mission concept addresses specifically the identification and characterisation of potential resources for future ESA exploration, the local environment of the subsurface and its geologic and compositional structure. A sphere is ideally suited to protect sensors and scientific equipment in rough, uneven environments. It will house laser scanners, cameras and ancillary payloads. The sphere will be lowered into the skylight and will explore the entrance shaft, associated caverns and conduits. Lidar (light detection and ranging) systems produce 3D models with high spatial accuracy independent of lighting conditions and visible features. Hence this will be the primary exploration toolset within the sphere. The additional payload that can be accommodated in the robotic sphere consists of camera systems with panoramic lenses and scanners such as multi-wavelength or single-photon scanners. A moving mass will trigger movements. The tether for lowering the sphere will be used for data communication and powering the equipment during the descending phase. Furthermore, the connector tether-sphere will host a WIFI access point, such that data of the conduit can be transferred to the surface relay station. During the exploration phase, the robot will be disconnected from the cable, and will use wireless communication. Emergency autonomy software will ensure that in case of loss of communication, the robot will continue the nominal mission. T3 - Forschungsberichte in der Robotik = Research Notes in Robotics - 21 KW - Lunar Caves KW - Spherical Robot KW - Lunar Exploration KW - Mapping KW - 3D Laser Scanning KW - Mond KW - Daedalus-Projekt KW - Lava Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-227911 SN - 978-3-945459-33-1 SN - 1868-7466 ER - TY - JOUR A1 - Rodrigues, Johannes A1 - Weiß, Martin A1 - Hewig, Johannes A1 - Allen, John J. B. T1 - EPOS: EEG Processing Open-Source Scripts JF - Frontiers in Neuroscience N2 - Background: Since the replication crisis, standardization has become even more important in psychological science and neuroscience. As a result, many methods are being reconsidered, and researchers’ degrees of freedom in these methods are being discussed as a potential source of inconsistencies across studies. New Method: With the aim of addressing these subjectivity issues, we have been working on a tutorial-like EEG (pre-)processing pipeline to achieve an automated method based on the semi-automated analysis proposed by Delorme and Makeig. Results: Two scripts are presented and explained step-by-step to perform basic, informed ERP and frequency-domain analyses, including data export to statistical programs and visual representations of the data. The open-source software EEGlab in MATLAB is used as the data handling platform, but scripts based on code provided by Mike Cohen (2014) are also included. Comparison with existing methods: This accompanying tutorial-like article explains and shows how the processing of our automated pipeline affects the data and addresses, especially beginners in EEG-analysis, as other (pre)-processing chains are mostly targeting rather informed users in specialized areas or only parts of a complete procedure. In this context, we compared our pipeline with a selection of existing approaches. Conclusion: The need for standardization and replication is evident, yet it is equally important to control the plausibility of the suggested solution by data exploration. Here, we provide the community with a tool to enhance the understanding and capability of EEG-analysis. We aim to contribute to comprehensive and reliable analyses for neuro-scientific research. KW - EEG KW - electroencephalography KW - event-related potentials-ERP KW - EEG processing KW - EEG preprocessing KW - EEG frequency band analysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-240221 SN - 1662-453X VL - 15 ER - TY - RPRT A1 - Riegler, Clemens A1 - Werner, Lennart A1 - Kayal, Hakan T1 - MAPLE: Marsian Autorotation Probe Lander Experiment N2 - The first step towards aerial planetary exploration has been made. Ingenuity shows extremely promising results, and new missions are already underway. Rotorcraft are capable of flight. This capability could be utilized to support the last stages of Entry, Descent, and Landing. Thus, mass and complexity could be scaled down. Autorotation is one method of descent. It describes unpowered descent and landing, typically performed by helicopters in case of an engine failure. MAPLE is suggested to test these procedures and understand autorotation on other planets. In this series of experiments, the Ingenuity helicopter is utilized. Ingenuity would autorotate a ”mid-air-landing” before continuing with normal flight. Ultimately, the collected data shall help to understand autorotation on Mars and its utilization for interplanetary exploration. T3 - Raumfahrttechnik und Extraterrestrik - 2 KW - autorotation KW - descent KW - Mars KW - rotorcraft KW - landing KW - aerospace Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-282390 ER - TY - RPRT A1 - Riegler, Clemens A1 - Kayal, Hakan T1 - VELEX: Venus Lightning Experiment N2 - Lightning has fascinated humanity since the beginning of our existence. Different types of lightning like sprites and blue jets were discovered, and many more are theorized. However, it is very likely that these phenomena are not exclusive to our home planet. Venus’s dense and active atmosphere is a place where lightning is to be expected. Missions like Venera, Pioneer, and Galileo have carried instruments to measure electromagnetic activity. These measurements have indeed delivered results. However, these results are not clear. They could be explained by other effects like cosmic rays, plasma noise, or spacecraft noise. Furthermore, these lightning seem different from those we know from our home planet. In order to tackle these issues, a different approach to measurement is proposed. When multiple devices in different spacecraft or locations can measure the same atmospheric discharge, most other explanations become increasingly less likely. Thus, the suggested instrument and method of VELEX incorporates multiple spacecraft. With this approach, the question about the existence of lightning on Venus could be settled. T3 - Raumfahrttechnik und Extraterrestrik - 3 KW - Venus KW - Lightning KW - CubeSat KW - Balloon KW - Autorotation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-282481 ER - TY - JOUR A1 - Riedmann, Anna A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - Integration of a social robot and gamification in adult learning and effects on motivation, engagement and performance JF - AI & Society N2 - Learning is a central component of human life and essential for personal development. Therefore, utilizing new technologies in the learning context and exploring their combined potential are considered essential to support self-directed learning in a digital age. A learning environment can be expanded by various technical and content-related aspects. Gamification in the form of elements from video games offers a potential concept to support the learning process. This can be supplemented by technology-supported learning. While the use of tablets is already widespread in the learning context, the integration of a social robot can provide new perspectives on the learning process. However, simply adding new technologies such as social robots or gamification to existing systems may not automatically result in a better learning environment. In the present study, game elements as well as a social robot were integrated separately and conjointly into a learning environment for basic Spanish skills, with a follow-up on retained knowledge. This allowed us to investigate the respective and combined effects of both expansions on motivation, engagement and learning effect. This approach should provide insights into the integration of both additions in an adult learning context. We found that the additions of game elements and the robot did not significantly improve learning, engagement or motivation. Based on these results and a literature review, we outline relevant factors for meaningful integration of gamification and social robots in learning environments in adult learning. KW - social robot KW - gamification KW - technology-supported learning KW - adult learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-324208 SN - 0951-5666 ER - TY - THES A1 - Reitwießner, Christian T1 - Multiobjective Optimization and Language Equations T1 - Mehrkriterielle Optimierung und Sprachgleichungen N2 - Praktische Optimierungsprobleme beinhalten oft mehrere gleichberechtigte, sich jedoch widersprechende Kriterien. Beispielsweise will man bei einer Reise zugleich möglichst schnell ankommen, sie soll aber auch nicht zu teuer sein. Im ersten Teil dieser Arbeit wird die algorithmische Beherrschbarkeit solcher mehrkriterieller Optimierungsprobleme behandelt. Es werden zunächst verschiedene Lösungsbegriffe diskutiert und auf ihre Schwierigkeit hin verglichen. Interessanterweise stellt sich heraus, dass diese Begriffe für ein einkriterielles Problem stets gleich schwer sind, sie sich ab zwei Kriterien allerdings stark unterscheiden könen (außer es gilt P = NP). In diesem Zusammenhang wird auch die Beziehung zwischen Such- und Entscheidungsproblemen im Allgemeinen untersucht. Schließlich werden neue und verbesserte Approximationsalgorithmen für verschieden Varianten des Problems des Handlungsreisenden gefunden. Dabei wird mit Mitteln der Diskrepanztheorie eine Technik entwickelt, die ein grundlegendes Hindernis der Mehrkriteriellen Optimierung aus dem Weg schafft: Gegebene Lösungen so zu kombinieren, dass die neue Lösung in allen Kriterien möglichst ausgewogen ist und gleichzeitig die Struktur der Lösungen nicht zu stark zerstört wird. Der zweite Teil der Arbeit widmet sich verschiedenen Aspekten von Gleichungssystemen für (formale) Sprachen. Einerseits werden konjunktive und Boolesche Grammatiken untersucht. Diese sind Erweiterungen der kontextfreien Grammatiken um explizite Durchschnitts- und Komplementoperationen. Es wird unter anderem gezeigt, dass man bei konjunktiven Grammatiken die Vereinigungsoperation stark einschränken kann, ohne dabei die erzeugte Sprache zu ändern. Außerdem werden bestimmte Schaltkreise untersucht, deren Gatter keine Wahrheitswerte sondern Mengen von Zahlen berechnen. Für diese Schaltkreise wird das Äquivalenzproblem betrachtet, also die Frage ob zwei gegebene Schaltkreise die gleiche Menge berechnen oder nicht. Es stellt sich heraus, dass, abhängig von den erlaubten Gattertypen, die Komplexität des Äquivalenzproblems stark variiert und für verschiedene Komplexitätsklassen vollständig ist, also als (parametrisierter) Vertreter für diese Klassen stehen kann. N2 - Practical optimization problems often comprise several incomparable and conflicting objectives. When booking a trip using several means of transport, for instance, it should be fast and at the same time not too expensive. The first part of this thesis is concerned with the algorithmic solvability of such multiobjective optimization problems. Several solution notions are discussed and compared with respect to their difficulty. Interestingly, these solution notions are always equally difficulty for a single-objective problem and they differ considerably already for two objectives (unless P = NP). In this context, the difference between search and decision problems is also investigated in general. Furthermore, new and improved approximation algorithms for several variants of the traveling salesperson problem are presented. Using tools from discrepancy theory, a general technique is developed that helps to avoid an obstacle that is often hindering in multiobjective approximation: The problem of combining two solutions such that the new solution is balanced in all objectives and also mostly retains the structure of the original solutions. The second part of this thesis is dedicated to several aspects of systems of equations for (formal) languages. Firstly, conjunctive and Boolean grammars are studied, which are extensions of context-free grammars by explicit intersection and complementation operations, respectively. Among other results, it is shown that one can considerably restrict the union operation on conjunctive grammars without changing the generated language. Secondly, certain circuits are investigated whose gates do not compute Boolean values but sets of natural numbers. For these circuits, the equivalence problem is studied, i.\,e.\ the problem of deciding whether two given circuits compute the same set or not. It is shown that, depending on the allowed types of gates, this problem is complete for several different complexity classes and can thus be seen as a parametrized) representative for all those classes. KW - Mehrkriterielle Optimierung KW - Approximationsalgorithmus KW - Travelling-salesman-Problem KW - Boolesche Grammatik KW - Theoretische Informatik KW - Komplexitätstheorie KW - Boolean Grammar Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-70146 ER - TY - THES A1 - Reith, Steffen T1 - Generalized Satisfiability Problems T1 - Verallgemeinerte Erfüllbarkeitsprobleme N2 - In the last 40 years, complexity theory has grown to a rich and powerful field in theoretical computer science. The main task of complexity theory is the classification of problems with respect to their consumption of resources (e.g., running time or required memory). To study the computational complexity (i.e., consumption of resources) of problems, similar problems are grouped into so called complexity classes. During the systematic study of numerous problems of practical relevance, no efficient algorithm for a great number of studied problems was found. Moreover, it was unclear whether such algorithms exist. A major breakthrough in this situation was the introduction of the complexity classes P and NP and the identification of hardest problems in NP. These hardest problems of NP are nowadays known as NP-complete problems. One prominent example of an NP-complete problem is the satisfiability problem of propositional formulas (SAT). Here we get a propositional formula as an input and it must be decided whether an assignment for the propositional variables exists, such that this assignment satisfies the given formula. The intensive study of NP led to numerous related classes, e.g., the classes of the polynomial-time hierarchy PH, P, #P, PP, NL, L and #L. During the study of these classes, problems related to propositional formulas were often identified to be complete problems for these classes. Hence some questions arise: Why is SAT so hard to solve? Are there modifications of SAT which are complete for other well-known complexity classes? In the context of these questions a result by E. Post is extremely useful. He identified and characterized all classes of Boolean functions being closed under superposition. It is possible to study problems which are connected to generalized propositional logic by using this result, which was done in this thesis. Hence, many different problems connected to propositional logic were studied and classified with respect to their computational complexity, clearing the borderline between easy and hard problems. N2 - In den letzten 40 Jahren hat sich die Komplexitätstheorie zu einem reichen und mächtigen Gebiet innerhalb der theoretischen Informatik entwickelt. Dabei ist die hauptsächliche Aufgabenstellung der Komplexitätstheorie die Klassifikation von Problemen bezüglich des Bedarfs von Rechenzeit oder Speicherplatz zu ihrer Lösung. Um die Komplexität von Problemen (d.h. den Bedarf von Resourcen) einzuordnen, werden Probleme mit ähnlichem Ressourcenbedarf in gleiche sogenannte Komplexitätsklassen einsortiert. Bei der systematischen Untersuchung einer Vielzahl von praktisch relevanten Problemen wurden jedoch keine effizienten Algorithmen für viele der untersuchten Probleme gefunden und es ist unklar, ob solche Algorithmen überhaupt existieren. Ein Durchbruch bei der Untersuchung dieser Problematik war die Einführung der Komplexitätsklassen P und NP und die Identifizierung von schwersten Problemen in NP. Diese schwierigsten Probleme von NP sind heute als sogenannte NP-vollständige Probleme bekannt. Ein prominentes Beispiel für ein NP-vollständiges Problem ist das Erfüllbarkeitsproblem für aussagenlogische Formeln (SAT). Hier ist eine aussagenlogische Formel als Eingabe gegeben und es muss bestimmt werden, ob eine Belegung der Wahrheitswertevariablen existiert, so dass diese Belegung die gegebene Formel erfüllt. Das intensive Studium der Klasse NP führte zu einer Vielzahl von anderen Komplexitätsklassen, wie z.B. die der Polynomialzeithierarchie PH, P, #P, PP, NL, L oder #L. Beim Studium dieser Klassen wurden sehr oft Probleme im Zusammenhang mit aussagenlogischen Formeln als schwierigste (vollständige) Probleme für diese Klassen identifiziert. Deshalb stellt sich folgende Frage: Welche Eigenschaften des Erfüllbarkeitsproblems SAT bewirken, dass es eines der schwersten Probleme der Klasse NP ist? Gibt es Einschränkungen oder Verallgemeinerungen des Erfüllbarkeitsproblems, die vollständig für andere bekannte Komplexitätsklassen sind? Im Zusammenhang mit solchen Fragestellungen ist ein Ergebnis von E. Post von extremem Nutzen. Er identifizierte und charakterisierte alle Klassen von Booleschen Funktionen, die unter Superposition abgeschlossen sind. Mit Hilfe dieses Resultats ist es möglich, Probleme im Zusammenhang mit verallgemeinerten Aussagenlogiken zu studieren, was in der vorliegenden Arbeit durchgeführt wurde. Dabei wurde eine Vielzahl von verschiedenen Problemen, die in Zusammenhang mit der Aussagenlogik stehen, studiert und bezüglich ihrer Komplexität klassifiziert. Dadurch wird die Grenzlinie zwischen einfach lösbaren Problemen und schweren Problemen sichtbar. KW - Erfüllbarkeitsproblem KW - Komplexitätstheorie KW - Boolesche Funktionen KW - Isomorphie KW - abgeschlossene Klassen KW - Zählprobleme KW - Computational complexity KW - Boolean functions KW - Boolean isomorphism KW - Boolean equivalence KW - Dichotomy KW - counting problems Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-74 ER - TY - JOUR A1 - Reinhard, Sebastian A1 - Helmerich, Dominic A. A1 - Boras, Dominik A1 - Sauer, Markus A1 - Kollmannsberger, Philip T1 - ReCSAI: recursive compressed sensing artificial intelligence for confocal lifetime localization microscopy JF - BMC Bioinformatics N2 - Background Localization-based super-resolution microscopy resolves macromolecular structures down to a few nanometers by computationally reconstructing fluorescent emitter coordinates from diffraction-limited spots. The most commonly used algorithms are based on fitting parametric models of the point spread function (PSF) to a measured photon distribution. These algorithms make assumptions about the symmetry of the PSF and thus, do not work well with irregular, non-linear PSFs that occur for example in confocal lifetime imaging, where a laser is scanned across the sample. An alternative method for reconstructing sparse emitter sets from noisy, diffraction-limited images is compressed sensing, but due to its high computational cost it has not yet been widely adopted. Deep neural network fitters have recently emerged as a new competitive method for localization microscopy. They can learn to fit arbitrary PSFs, but require extensive simulated training data and do not generalize well. A method to efficiently fit the irregular PSFs from confocal lifetime localization microscopy combining the advantages of deep learning and compressed sensing would greatly improve the acquisition speed and throughput of this method. Results Here we introduce ReCSAI, a compressed sensing neural network to reconstruct localizations for confocal dSTORM, together with a simulation tool to generate training data. We implemented and compared different artificial network architectures, aiming to combine the advantages of compressed sensing and deep learning. We found that a U-Net with a recursive structure inspired by iterative compressed sensing showed the best results on realistic simulated datasets with noise, as well as on real experimentally measured confocal lifetime scanning data. Adding a trainable wavelet denoising layer as prior step further improved the reconstruction quality. Conclusions Our deep learning approach can reach a similar reconstruction accuracy for confocal dSTORM as frame binning with traditional fitting without requiring the acquisition of multiple frames. In addition, our work offers generic insights on the reconstruction of sparse measurements from noisy experimental data by combining compressed sensing and deep learning. We provide the trained networks, the code for network training and inference as well as the simulation tool as python code and Jupyter notebooks for easy reproducibility. KW - compressed sensing KW - AI KW - SMLM KW - FLIMbee KW - dSTORM Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-299768 VL - 23 IS - 1 ER - TY - RPRT A1 - Rauber, Christof A. O. A1 - Brechtel, Lukas A1 - Schotten, Hans D. T1 - JCAS-Enabled Sensing as a Service in 6th-Generation Mobile Communication Networks T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The introduction of new types of frequency spectrum in 6G technology facilitates the convergence of conventional mobile communications and radar functions. Thus, the mobile network itself becomes a versatile sensor system. This enables mobile network operators to offer a sensing service in addition to conventional data and telephony services. The potential benefits are expected to accrue to various stakeholders, including individuals, the environment, and society in general. The paper discusses technological development, possible integration, and use cases, as well as future development areas. KW - Sensing-aaS KW - JCAS KW - 6G Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322135 ER - TY - RPRT A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - Towards Understanding the Signaling Traffic in 5G Core Networks T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The Fifth Generation (5G) communication technology, its infrastructure and architecture, though already deployed in campus and small scale networks, is still undergoing continuous changes and research. Especially, in the light of future large scale deployments and industrial use cases, a detailed analysis of the performance and utilization with regard to latency and service times constraints is crucial. To this end, a fine granular investigation of the Network Function (NF) based core system and the duration for all the tasks performed by these services is necessary. This work presents the first steps towards analyzing the signaling traffic in 5G core networks, and introduces a tool to automatically extract sequence diagrams and service times for NF tasks from traffic traces. KW - signaling traffic KW - 5G core network Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322106 ER - TY - RPRT A1 - Raffeck, Simon A1 - Geißler, Stefan A1 - Hoßfeld, Tobias T1 - DBM: Decentralized Burst Mitigation for Self-Organizing LoRa Deployments T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - This work proposes a novel approach to disperse dense transmission intervals and reduce bursty traffic patterns without the need for centralized control. Furthermore, by keeping the mechanism as close to the Long Range Wide Area Network (LoRaWAN) standard as possible the suggested mechanism can be deployed within existing networks and can even be co-deployed with other devices. KW - Datennetz KW - LoRa Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280809 ER - TY - THES A1 - Pries, Jan Rastin T1 - Performance Optimization of Wireless Infrastructure and Mesh Networks T1 - Leistungsoptimierung von drahtlosen Infrastruktur und Mesh Netzen N2 - Future broadband wireless networks should be able to support not only best effort traffic but also real-time traffic with strict Quality of Service (QoS) constraints. In addition, their available resources are scare and limit the number of users. To facilitate QoS guarantees and increase the maximum number of concurrent users, wireless networks require careful planning and optimization. In this monograph, we studied three aspects of performance optimization in wireless networks: resource optimization in WLAN infrastructure networks, quality of experience control in wireless mesh networks, and planning and optimization of wireless mesh networks. An adaptive resource management system is required to effectively utilize the limited resources on the air interface and to guarantee QoS for real-time applications. Thereby, both WLAN infrastructure and WLAN mesh networks have to be considered. An a-priori setting of the access parameters is not meaningful due to the contention-based medium access and the high dynamics of the system. Thus, a management system is required which dynamically adjusts the channel access parameters based on the network load. While this is sufficient for wireless infrastructure networks, interferences on neighboring paths and self-interferences have to be considered for wireless mesh networks. In addition, a careful channel allocation and route assignment is needed. Due to the large parameter space, standard optimization techniques fail for optimizing large wireless mesh networks. In this monograph, we reveal that biology-inspired optimization techniques, namely genetic algorithms, are well-suitable for the planning and optimization of wireless mesh networks. Although genetic algorithms generally do not always find the optimal solution, we show that with a good parameter set for the genetic algorithm, the overall throughput of the wireless mesh network can be significantly improved while still sharing the resources fairly among the users. N2 - Die Anbindung an das Internet erfolgt zunehmend über drahtlose Netze. Deren Ressourcen sind allerdings limitiert, was die Anzahl der unterstützten Nutzer stark einschränkt. Zudem ist ein Trend dieser Nutzer weg von der Verwendung reiner Datendienste zu Diensten mit Echtzeitanforderungen wie Voice over IP (VoIP) zu erkennen, deren Dienstgüteanforderungen eingehalten werden müssen. Heutige drahtlose Zugangsnetze sind jedoch nur für den herkömmlichen Datenverkehr ausgelegt. Der IEEE 802.11 WLAN Standard unterscheidet zwar zwischen verschiedenen Dienstklassen, gibt aber keine Dienstgütegarantien. Um die Dienstgüte (Quality of Service, QoS), bzw. die vom Nutzer erfahrene Dienstgüte (Quality of Experience, QoE) zu garantieren, müssen die zukünftigen drahtlosen Netze daher sorgfältig geplant und optimiert werden. Um die limitierten Ressourcen auf der Luftschnittstelle effektiv zu nutzen und um Dienstgüteanforderungen für Echtzeitanwendungen einzuhalten, bedarf es eines adaptiven Ressourcenmanagements. Dabei sind sowohl drahtlose Infrastruktur, als auch drahtlose Mesh-Netze zu betrachten. Durch den randomisierten Medienzugriff und die hohe Dynamik im System ist eine a-priori Wahl der Zugangsparameter nicht sinnvoll. Vielmehr wird ein Managementsystem benötigt, das die Zugangsparameter dynamisch in Abhängigkeit der Last in einem Netz wählt. Während dies für drahtlose Infrastrukturnetze ausreicht, müssen in drahtlosen Mesh-Netzen zusätzlich noch Interferenzen von Nachbarpfaden und Eigeninterferenzen berücksichtigt werden. Desweiteren ist eine sorgfältige Planung der Kanalzuweisung und des Routings notwendig, um einerseits den Durchsatz in drahtlosen Mesh-Netzen zu maximieren und andererseits die Ressourcen fair zwischen den Stationen aufzuteilen. Da es dabei eine Vielzahl von Parametern zu berücksichtigen gilt, sind neue Optimierungsmethoden notwendig, die es ermöglichen, auch große Mesh-Netze in annehmbarer Zeit zu planen und zu optimieren. Diese Doktorarbeit arbeitet die folgenden drei Optimierungsmöglichkeiten für drahtlose Zugangsnetze aus: Optimierung der Zugangsparameter in drahtlosen Infrastrukturnetzen, Optimierung von drahtlosen Mesh-Netzen unter Berücksichtigung der QoE und Planung und Optimierung von drahtlosen Mesh-Netzen mit Berücksichtigung einer fairen Ressourcenallokation. Die Ergebnisse und Untersuchungen dieser Arbeit gliedern sich entsprechend dieser Optimierungsmöglichkeiten. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 01/10 KW - IEEE 802.11 KW - Leistungsbewertung KW - Optimierung KW - Dienstgüte KW - Netzplanung KW - Drahtloses lokales Netz KW - WLAN KW - Mesh Netze KW - Genetische Optimierung KW - WLAN KW - Optimization KW - Mesh Networks KW - Genetic Optimization Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-46097 ER - TY - JOUR A1 - Prantl, Thomas A1 - Zeck, Timo A1 - Bauer, Andre A1 - Ten, Peter A1 - Prantl, Dominik A1 - Yahya, Ala Eddine Ben A1 - Ifflaender, Lukas A1 - Dmitrienko, Alexandra A1 - Krupitzer, Christian A1 - Kounev, Samuel T1 - A Survey on Secure Group Communication Schemes With Focus on IoT Communication JF - IEEE Access N2 - A key feature for Internet of Things (IoT) is to control what content is available to each user. To handle this access management, encryption schemes can be used. Due to the diverse usage of encryption schemes, there are various realizations of 1-to-1, 1-to-n, and n-to-n schemes in the literature. This multitude of encryption methods with a wide variety of properties presents developers with the challenge of selecting the optimal method for a particular use case, which is further complicated by the fact that there is no overview of existing encryption schemes. To fill this gap, we envision a cryptography encyclopedia providing such an overview of existing encryption schemes. In this survey paper, we take a first step towards such an encyclopedia by creating a sub-encyclopedia for secure group communication (SGC) schemes, which belong to the n-to-n category. We extensively surveyed the state-of-the-art and classified 47 different schemes. More precisely, we provide (i) a comprehensive overview of the relevant security features, (ii) a set of relevant performance metrics, (iii) a classification for secure group communication schemes, and (iv) workflow descriptions of the 47 schemes. Moreover, we perform a detailed performance and security evaluation of the 47 secure group communication schemes. Based on this evaluation, we create a guideline for the selection of secure group communication schemes. KW - Internet of Things KW - encryption KW - secure group communication Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-300257 VL - 10 SP - 99944 EP - 99962 ER - TY - JOUR A1 - Prakash, Subash A1 - Unnikrishnan, Vishnu A1 - Pryss, Rüdiger A1 - Kraft, Robin A1 - Schobel, Johannes A1 - Hannemann, Ronny A1 - Langguth, Berthold A1 - Schlee, Winfried A1 - Spiliopoulou, Myra T1 - Interactive system for similarity-based inspection and assessment of the well-being of mHealth users JF - Entropy N2 - Recent digitization technologies empower mHealth users to conveniently record their Ecological Momentary Assessments (EMA) through web applications, smartphones, and wearable devices. These recordings can help clinicians understand how the users' condition changes, but appropriate learning and visualization mechanisms are required for this purpose. We propose a web-based visual analytics tool, which processes clinical data as well as EMAs that were recorded through a mHealth application. The goals we pursue are (1) to predict the condition of the user in the near and the far future, while also identifying the clinical data that mostly contribute to EMA predictions, (2) to identify users with outlier EMA, and (3) to show to what extent the EMAs of a user are in line with or diverge from those users similar to him/her. We report our findings based on a pilot study on patient empowerment, involving tinnitus patients who recorded EMAs with the mHealth app TinnitusTips. To validate our method, we also derived synthetic data from the same pilot study. Based on this setting, results for different use cases are reported. KW - medical analytics KW - condition prediction KW - ecological momentary assessment KW - visual analytics KW - time series Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-252333 SN - 1099-4300 VL - 23 IS - 12 ER - TY - JOUR A1 - Pfitzner, Christian A1 - May, Stefan A1 - Nüchter, Andreas T1 - Body weight estimation for dose-finding and health monitoring of lying, standing and walking patients based on RGB-D data JF - Sensors N2 - This paper describes the estimation of the body weight of a person in front of an RGB-D camera. A survey of different methods for body weight estimation based on depth sensors is given. First, an estimation of people standing in front of a camera is presented. Second, an approach based on a stream of depth images is used to obtain the body weight of a person walking towards a sensor. The algorithm first extracts features from a point cloud and forwards them to an artificial neural network (ANN) to obtain an estimation of body weight. Besides the algorithm for the estimation, this paper further presents an open-access dataset based on measurements from a trauma room in a hospital as well as data from visitors of a public event. In total, the dataset contains 439 measurements. The article illustrates the efficiency of the approach with experiments with persons lying down in a hospital, standing persons, and walking persons. Applicable scenarios for the presented algorithm are body weight-related dosing of emergency patients. KW - RGB-D KW - human body weight KW - image processing KW - kinect KW - machine learning KW - perception KW - segmentation KW - sensor fusion KW - stroke KW - thermal camera Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176642 VL - 18 IS - 5 ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DLTPulseGenerator: a library for the simulation of lifetime spectra based on detector-output pulses JF - SoftwareX N2 - The quantitative analysis of lifetime spectra relevant in both life and materials sciences presents one of the ill-posed inverse problems and, hence, leads to most stringent requirements on the hardware specifications and the analysis algorithms. Here we present DLTPulseGenerator, a library written in native C++ 11, which provides a simulation of lifetime spectra according to the measurement setup. The simulation is based on pairs of non-TTL detector output-pulses. Those pulses require the Constant Fraction Principle (CFD) for the determination of the exact timing signal and, thus, the calculation of the time difference i.e. the lifetime. To verify the functionality, simulation results were compared to experimentally obtained data using Positron Annihilation Lifetime Spectroscopy (PALS) on pure tin. KW - lifetime spectroscopy KW - signal processing KW - pulse simulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-176883 VL - 7 ER - TY - JOUR A1 - Petschke, Danny A1 - Staab, Torsten E.M. T1 - DDRS4PALS: a software for the acquisition and simulation of lifetime spectra using the DRS4 evaluation board JF - SoftwareX N2 - Lifetime techniques are applied to diverse fields of study including materials sciences, semiconductor physics, biology, molecular biophysics and photochemistry. Here we present DDRS4PALS, a software for the acquisition and simulation of lifetime spectra using the DRS4 evaluation board (Paul Scherrer Institute, Switzerland) for time resolved measurements and digitization of detector output pulses. Artifact afflicted pulses can be corrected or rejected prior to the lifetime calculation to provide the generation of high-quality lifetime spectra, which are crucial for a profound analysis, i.e. the decomposition of the true information. Moreover, the pulses can be streamed on an (external) hard drive during the measurement and subsequently downloaded in the offline mode without being connected to the hardware. This allows the generation of various lifetime spectra at different configurations from one single measurement and, hence, a meaningful comparison in terms of analyzability and quality. Parallel processing and an integrated JavaScript based language provide convenient options to accelerate and automate time consuming processes such as lifetime spectra simulations. KW - Lifetime spectroscopy KW - Positron annihilation spectroscopy KW - Simulation KW - Time resolved measurements Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-202276 VL - 10 ER - TY - THES A1 - Peng, Dongliang T1 - An Optimization-Based Approach for Continuous Map Generalization T1 - Optimierung für die kontinuierliche Generalisierung von Landkarten N2 - Maps are the main tool to represent geographical information. Geographical information is usually scale-dependent, so users need to have access to maps at different scales. In our digital age, the access is realized by zooming. As discrete changes during the zooming tend to distract users, smooth changes are preferred. This is why some digital maps are trying to make the zooming as continuous as they can. The process of producing maps at different scales with smooth changes is called continuous map generalization. In order to produce maps of high quality, cartographers often take into account additional requirements. These requirements are transferred to models in map generalization. Optimization for map generalization is important not only because it finds optimal solutions in the sense of the models, but also because it helps us to evaluate the quality of the models. Optimization, however, becomes more delicate when we deal with continuous map generalization. In this area, there are requirements not only for a specific map but also for relations between maps at difference scales. This thesis is about continuous map generalization based on optimization. First, we show the background of our research topics. Second, we find optimal sequences for aggregating land-cover areas. We compare the A$^{\!\star}$\xspace algorithm and integer linear programming in completing this task. Third, we continuously generalize county boundaries to provincial boundaries based on compatible triangulations. We morph between the two sets of boundaries, using dynamic programming to compute the correspondence. Fourth, we continuously generalize buildings to built-up areas by aggregating and growing. In this work, we group buildings with the help of a minimum spanning tree. Fifth, we define vertex trajectories that allow us to morph between polylines. We require that both the angles and the edge lengths change linearly over time. As it is impossible to fulfill all of these requirements simultaneously, we mediate between them using least-squares adjustment. Sixth, we discuss the performance of some commonly used data structures for a specific spatial problem. Seventh, we conclude this thesis and present open problems. N2 - Maps are the main tool to represent geographical information. Users often zoom in and out to access maps at different scales. Continuous map generalization tries to make the changes between different scales smooth, which is essential to provide users with comfortable zooming experience. In order to achieve continuous map generalization with high quality, we optimize some important aspects of maps. In this book, we have used optimization in the generalization of land-cover areas, administrative boundaries, buildings, and coastlines. According to our experiments, continuous map generalization indeed benefits from optimization. N2 - Landkarten sind das wichtigste Werkzeug zur Repräsentation geografischer Information. Unter der Generalisierung von Landkarten versteht man die Aufbereitung von geografischen Informationen aus detaillierten Daten zur Generierung von kleinmaßstäbigen Karten. Nutzer von Online-Karten zoomen oft in eine Karte hinein oder aus einer Karte heraus, um mehr Details bzw. mehr Überblick zu bekommen. Die kontinuierliche Generalisierung von Landkarten versucht die Änderungen zwischen verschiedenen Maßstäben stetig zu machen. Dies ist wichtig, um Nutzern eine angenehme Zoom-Erfahrung zu bieten. Um eine qualitativ hochwertige kontinuierliche Generalisierung zu erreichen, kann man wichtige Aspekte bei der Generierung von Online-Karten optimieren. In diesem Buch haben wir Optimierung bei der Generalisierung von Landnutzungskarten, von administrativen Grenzen, Gebäuden und Küstenlinien eingesetzt. Unsere Experimente zeigen, dass die kontinuierliche Generalisierung von Landkarten in der Tat von Optimierung profitiert. KW - land-cover area KW - administrative boundary KW - building KW - morphing KW - data structure KW - zooming KW - Generalisierung KW - Landnutzungskartierung KW - Optimierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-174427 SN - 978-3-95826-104-4 SN - 978-3-95826-105-1 N1 - Parallel erschienen als Druckausgabe in Würzburg University Press, 978-3-95826-104-4, 24,90 EUR. PB - Würzburg University Press CY - Würzburg ET - 1. Auflage ER - TY - JOUR A1 - Pawellek, Ruben A1 - Krmar, Jovana A1 - Leistner, Adrian A1 - Djajić, Nevena A1 - Otašević, Biljana A1 - Protić, Ana A1 - Holzgrabe, Ulrike T1 - Charged aerosol detector response modeling for fatty acids based on experimental settings and molecular features: a machine learning approach JF - Journal of Cheminformatics N2 - The charged aerosol detector (CAD) is the latest representative of aerosol-based detectors that generate a response independent of the analytes' chemical structure. This study was aimed at accurately predicting the CAD response of homologous fatty acids under varying experimental conditions. Fatty acids from C12 to C18 were used as model substances due to semivolatile characterics that caused non-uniform CAD behaviour. Considering both experimental conditions and molecular descriptors, a mixed quantitative structure-property relationship (QSPR) modeling was performed using Gradient Boosted Trees (GBT). The ensemble of 10 decisions trees (learning rate set at 0.55, the maximal depth set at 5, and the sample rate set at 1.0) was able to explain approximately 99% (Q\(^2\): 0.987, RMSE: 0.051) of the observed variance in CAD responses. Validation using an external test compound confirmed the high predictive ability of the model established (R-2: 0.990, RMSEP: 0.050). With respect to the intrinsic attribute selection strategy, GBT used almost all independent variables during model building. Finally, it attributed the highest importance to the power function value, the flow rate of the mobile phase, evaporation temperature, the content of the organic solvent in the mobile phase and the molecular descriptors such as molecular weight (MW), Radial Distribution Function-080/weighted by mass (RDF080m) and average coefficient of the last eigenvector from distance/detour matrix (Ve2_D/Dt). The identification of the factors most relevant to the CAD responsiveness has contributed to a better understanding of the underlying mechanisms of signal generation. An increased CAD response that was obtained for acetone as organic modifier demonstrated its potential to replace the more expensive and environmentally harmful acetonitrile. KW - High-performance liquid chromatography (HPLC) KW - Charged aerosol detector (CAD) KW - Gradient boosted trees (GBT) KW - Quantitative structure-property relationship modeling (QSPR) KW - Fatty acids Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-261618 VL - 13 IS - 1 ER - TY - THES A1 - Ostermayer, Ludwig T1 - Integration of Prolog and Java with the Connector Architecture CAPJa T1 - Integration von Prolog und Java mit Hilfe der Connector Architecture CAPJa N2 - Modern software is often realized as a modular combination of subsystems for, e. g., knowledge management, visualization, verification, or the interaction with users. As a result, software libraries from possibly different programming languages have to work together. Even more complex the case is if different programming paradigms have to be combined. This type of diversification of programming languages and paradigms in just one software application can only be mastered by mechanisms for a seamless integration of the involved programming languages. However, the integration of the common logic programming language Prolog and the popular object-oriented programming language Java is complicated by various interoperability problems which stem on the one hand from the paradigmatic gap between the programming languages, and on the other hand, from the diversity of the available Prolog systems. The subject of the thesis is the investigation of novel mechanisms for the integration of logic programming in Prolog and object–oriented programming in Java. We are particularly interested in an object–oriented, uniform approach which is not specific to just one Prolog system. Therefore, we have first identified several important criteria for the seamless integration of Prolog and Java from the object–oriented perspective. The main contribution of the thesis is a novel integration framework called the Connector Architecture for Prolog and Java (CAPJa). The framework is completely implemented in Java and imposes no modifications to the Java Virtual Machine or Prolog. CAPJa provides a semi–automated mechanism for the integration of Prolog predicates into Java. For compact, readable, and object–oriented queries to Prolog, CAPJa exploits lambda expressions with conditional and relational operators in Java. The communication between Java and Prolog is based on a fully automated mapping of Java objects to Prolog terms, and vice versa. In Java, an extensible system of gateways provides connectivity with various Prolog system and, moreover, makes any connected Prolog system easily interchangeable, without major adaption in Java. N2 - Moderne Software ist oft modular zusammengesetzt aus Subsystemen zur Wissensverwaltung, Visualisierung, Verfikation oder Benutzerinteraktion. Dabei müssen Programmbibliotheken aus möglicherweise verschiedenen Programmiersprachen miteinander zusammenarbeiten. Noch komplizierter ist der Fall, wenn auch noch verschiedene Programmierparadigmen miteinander kombiniert werden. Diese Art der Diversifikation an Programmiersprachen und –paradigmen in nur einer Software kann nur von nahtlosen Integrationsmechansimen für die beteiligten Programmiersprachen gemeistert werden. Gerade die Einbindung der gängigen Logikprogrammiersprache Prolog und der populären objektorientierten Programmiersprache Java wird durch zahlreiche Kompatibilitätsprobleme erschwert, welche auf der einen Seite von paradigmatischen Unterschieden der beiden Programmiersprachen herrühren und auf der anderen Seite von der Vielfalt der erhältlichen Prologimplementierungen. Gegenstand dieser Arbeit ist die Untersuchung von neuartigen Mechanismen für die Zusammenführung von Logikprogrammierung in Prolog und objektorienter Programmierung in Java. Besonders interessiert uns dabei ein objektorientierter, einheitlicher Ansatz, der nicht auf eine konkrete Prologimplementierung festgelegt ist. Aus diesem Grund haben wir zunächst wichtige Kriterien für die nahtlose Integration von Prolog und Java aus der objetorientierten Sicht identifziert. Der Hauptbeitrag dieser Arbeit ist ein neuartiges Integrationssystems, welches Connector Architecture for Prolog and Java (CAPJa) heißt. Das System ist komplett in Java implementiert und benötigt keine Anpassungen der Java Virtual Machine oder Prolog. CAPJa stellt einen halbautomatischen Mechanismus zur Vernetzung von Prolog Prädikaten mit Java zur Verfügung. Für kompakte, lesbare und objektorientierte Anfragen an Prolog nutzt CAPJa Lambdaausdrücke mit logischen und relationalen Operatoren in Java. Die Kommunikation zwischen Java und Prolog basiert auf einer automatisierten Abbildung von Java Objekten auf Prolog Terme, und umgekehrt. In Java bietet ein erweiterbares System von Schnittstellen Konnektivität zu einer Vielzahl an Prologimplmentierung und macht darüber hinaus jede verbundene Prologimplementierung einfach austauschbar, und zwar ohne größere Anpassung in Java. KW - Logische Programmierung KW - Objektorientierte Programmierung KW - PROLOG KW - Java KW - Multi-Paradigm Programming KW - Logic Programming KW - Object-Oriented Programming KW - Multi-Paradigm Programming Framework Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-150713 ER - TY - JOUR A1 - Osmanoglu, Özge A1 - Khaled AlSeiari, Mariam A1 - AlKhoori, Hasa Abduljaleel A1 - Shams, Shabana A1 - Bencurova, Elena A1 - Dandekar, Thomas A1 - Naseem, Muhammad T1 - Topological Analysis of the Carbon-Concentrating CETCH Cycle and a Photorespiratory Bypass Reveals Boosted CO\(_2\)-Sequestration by Plants JF - Frontiers in Bioengineering and Biotechnology N2 - Synthetically designed alternative photorespiratory pathways increase the biomass of tobacco and rice plants. Likewise, some in planta–tested synthetic carbon-concentrating cycles (CCCs) hold promise to increase plant biomass while diminishing atmospheric carbon dioxide burden. Taking these individual contributions into account, we hypothesize that the integration of bypasses and CCCs will further increase plant productivity. To test this in silico, we reconstructed a metabolic model by integrating photorespiration and photosynthesis with the synthetically designed alternative pathway 3 (AP3) enzymes and transporters. We calculated fluxes of the native plant system and those of AP3 combined with the inhibition of the glycolate/glycerate transporter by using the YANAsquare package. The activity values corresponding to each enzyme in photosynthesis, photorespiration, and for synthetically designed alternative pathways were estimated. Next, we modeled the effect of the crotonyl-CoA/ethylmalonyl-CoA/hydroxybutyryl-CoA cycle (CETCH), which is a set of natural and synthetically designed enzymes that fix CO₂ manifold more than the native Calvin–Benson–Bassham (CBB) cycle. We compared estimated fluxes across various pathways in the native model and under an introduced CETCH cycle. Moreover, we combined CETCH and AP3-w/plgg1RNAi, and calculated the fluxes. We anticipate higher carbon dioxide–harvesting potential in plants with an AP3 bypass and CETCH–AP3 combination. We discuss the in vivo implementation of these strategies for the improvement of C3 plants and in natural high carbon harvesters. KW - CO2-sequestration KW - photorespiration KW - elementary modes KW - synthetic pathways KW - carboxylation KW - metabolic modeling KW - CETCH cycle Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-249260 SN - 2296-4185 VL - 9 ER - TY - THES A1 - Oechsner, Simon T1 - Performance Challenges and Optimization Potential of Peer-to-Peer Overlay Technologies T1 - Leistungsanforderungen und Optimierungspotential von Peer-to-Peer Overlay-Technologien N2 - In today's Internet, building overlay structures to provide a service is becoming more and more common. This approach allows for the utilization of client resources, thus being more scalable than a client-server model in this respect. However, in these architectures the quality of the provided service depends on the clients and is therefore more complex to manage. Resource utilization, both at the clients themselves and in the underlying network, determine the efficiency of the overlay application. Here, a trade-off exists between the resource providers and the end users that can be tuned via overlay mechanisms. Thus, resource management and traffic management is always quality-of-service management as well. In this monograph, the three currently significant and most widely used overlay types in the Internet are considered. These overlays are implemented in popular applications which only recently have gained importance. Thus, these overlay networks still face real-world technical challenges which are of high practical relevance. We identify the specific issues for each of the considered overlays, and show how their optimization affects the trade-offs between resource efficiency and service quality. Thus, we supply new insights and system knowledge that is not provided by previous work. N2 - Im heutigen Internet werden immer häufiger Overlay-Strukturen aufgebaut, um eine Dienstleistung zu erbringen. Dieser Ansatz ermöglicht die Nutzung von Client-Ressourcen, so dass er in dieser Hinsicht besser skaliert als das Client-Server-Modell. Die Qualität des zur Verfügung gestellten Dienstes hängt nun aber von den Clients ab und ist daher komplizierter zu steuern. Die Ressourcennutzung, sowohl auf den Clients selbst als auch in dem zugrunde liegenden Netzwerk, bestimmt die Effizienz der Overlay-Anwendung. Hier existiert ein Trade-off zwischen Ressourcen-Anbietern und Endkunden, der über Overlay-Mechanismen geregelt werden kann. Daher ist Ressourcenmanagement und Traffic-Management gleichzeitig immer auch Quality-of-Service-Management. In dieser Arbeit werden die drei derzeit am weitesten im Internet verbreiteten und signifikanten Overlay-Typen berücksichtigt. Diese Overlays sind in populären Anwendungen, die erst vor kurzem an Bedeutung gewonnen haben, implementiert. Daher sind diese Overlay-Netze nach wie vor realen technischen Herausforderungen ausgesetzt, die von hoher praktischer Relevanz sind. Die spezifischen Herausforderungen für jedes der betrachteten Overlays werden identifiziert und es wird gezeigt, wie deren Optimierung den Trade-off zwischen Ressourceneffizienz und Service-Qualität beeinflusst. So werden neue Einsichten und Erkenntnisse über diese Systeme gewonnen, die in früheren Arbeiten nicht existieren. T3 - Würzburger Beiträge zur Leistungsbewertung Verteilter Systeme - 02/10 KW - Overlay-Netz KW - Peer-to-Peer-Netz KW - Leistungsbewertung KW - Overlays KW - Peer-to-Peer KW - Performance Evaluation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50015 ER - TY - RPRT A1 - Odhah, Najib A1 - Grass, Eckhard A1 - Kraemer, Rolf T1 - Effective Rate of URLLC with Short Block-Length Information Theory T2 - Würzburg Workshop on Next-Generation Communication Networks (WueWoWas'22) N2 - Shannon channel capacity estimation, based on large packet length is used in traditional Radio Resource Management (RRM) optimization. This is good for the normal transmission of data in a wired or wireless system. For industrial automation and control, rather short packages are used due to the short-latency requirements. Using Shannon’s formula leads in this case to inaccurate RRM solutions, thus another formula should be used to optimize radio resources in short block-length packet transmission, which is the basic of Ultra-Reliable Low-Latency Communications (URLLCs). The stringent requirement of delay Quality of Service (QoS) for URLLCs requires a link-level channel model rather than a physical level channel model. After finding the basic and accurate formula of the achievable rate of short block-length packet transmission, the RRM optimization problem can be accurately formulated and solved under the new constraints of URLLCs. In this short paper, the current mathematical models, which are used in formulating the effective transmission rate of URLLCs, will be briefly explained. Then, using this rate in RRM for URLLC will be discussed. KW - Datennetz KW - URLLC KW - RRM KW - delay QoS exponent KW - decoding error rate KW - delay bound violation probability KW - short block-length KW - effective Bandwidth Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-280859 ER - TY - JOUR A1 - Obremski, David A1 - Lugrin, Jean-Luc A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - Non-native speaker perception of Intelligent Virtual Agents in two languages: the impact of amount and type of grammatical mistakes JF - Journal on Multimodal User Interfaces N2 - Having a mixed-cultural membership becomes increasingly common in our modern society. It is thus beneficial in several ways to create Intelligent Virtual Agents (IVAs) that reflect a mixed-cultural background as well, e.g., for educational settings. For research with such IVAs, it is essential that they are classified as non-native by members of a target culture. In this paper, we focus on variations of IVAs’ speech to create the impression of non-native speakers that are identified as such by speakers of two different mother tongues. In particular, we investigate grammatical mistakes and identify thresholds beyond which the agents is clearly categorised as a non-native speaker. Therefore, we conducted two experiments: one for native speakers of German, and one for native speakers of English. Results of the German study indicate that beyond 10% of word order mistakes and 25% of infinitive mistakes German-speaking IVAs are perceived as non-native speakers. Results of the English study indicate that beyond 50% of omission mistakes and 50% of infinitive mistakes English-speaking IVAs are perceived as non-native speakers. We believe these thresholds constitute helpful guidelines for computational approaches of non-native speaker generation, simplifying research with IVAs in mixed-cultural settings. KW - mixed-cultural settings KW - Intelligent Virtual Agents KW - verbal behaviour Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-269984 SN - 1783-8738 VL - 15 IS - 2 ER - TY - JOUR A1 - Obremski, David A1 - Friedrich, Paula A1 - Haak, Nora A1 - Schaper, Philipp A1 - Lugrin, Birgit T1 - The impact of mixed-cultural speech on the stereotypical perception of a virtual robot JF - Frontiers in Robotics and AI N2 - Despite the fact that mixed-cultural backgrounds become of increasing importance in our daily life, the representation of multiple cultural backgrounds in one entity is still rare in socially interactive agents (SIAs). This paper’s contribution is twofold. First, it provides a survey of research on mixed-cultured SIAs. Second, it presents a study investigating how mixed-cultural speech (in this case, non-native accent) influences how a virtual robot is perceived in terms of personality, warmth, competence and credibility. Participants with English or German respectively as their first language watched a video of a virtual robot speaking in either standard English or German-accented English. It was expected that the German-accented speech would be rated more positively by native German participants as well as elicit the German stereotypes credibility and conscientiousness for both German and English participants. Contrary to the expectations, German participants rated the virtual robot lower in terms of competence and credibility when it spoke with a German accent, whereas English participants perceived the virtual robot with a German accent as more credible compared to the version without an accent. Both the native English and native German listeners classified the virtual robot with a German accent as significantly more neurotic than the virtual robot speaking standard English. This work shows that by solely implementing a non-native accent in a virtual robot, stereotypes are partly transferred. It also shows that the implementation of a non-native accent leads to differences in the perception of the virtual robot. KW - non-native accent KW - social robotics KW - intelligent virtual agents KW - stereotypes KW - mixed-cultural KW - culturally aware KW - socially interactive agents Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-293531 SN - 2296-9144 VL - 9 ER - TY - JOUR A1 - Oberdörfer, Sebastian A1 - Latoschik, Marc Erich T1 - Knowledge encoding in game mechanics: transfer-oriented knowledge learning in desktop-3D and VR JF - International Journal of Computer Games Technology N2 - Affine Transformations (ATs) are a complex and abstract learning content. Encoding the AT knowledge in Game Mechanics (GMs) achieves a repetitive knowledge application and audiovisual demonstration. Playing a serious game providing these GMs leads to motivating and effective knowledge learning. Using immersive Virtual Reality (VR) has the potential to even further increase the serious game’s learning outcome and learning quality. This paper compares the effectiveness and efficiency of desktop-3D and VR in respect to the achieved learning outcome. Also, the present study analyzes the effectiveness of an enhanced audiovisual knowledge encoding and the provision of a debriefing system. The results validate the effectiveness of the knowledge encoding in GMs to achieve knowledge learning. The study also indicates that VR is beneficial for the overall learning quality and that an enhanced audiovisual encoding has only a limited effect on the learning outcome. KW - games Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-201159 VL - 2019 ER - TY - JOUR A1 - Oberdörfer, Sebastian A1 - Heidrich, David A1 - Birnstiel, Sandra A1 - Latoschik, Marc Erich T1 - Enchanted by Your Surrounding? Measuring the Effects of Immersion and Design of Virtual Environments on Decision-Making JF - Frontiers in Virtual Reality N2 - Impaired decision-making leads to the inability to distinguish between advantageous and disadvantageous choices. The impairment of a person’s decision-making is a common goal of gambling games. Given the recent trend of gambling using immersive Virtual Reality it is crucial to investigate the effects of both immersion and the virtual environment (VE) on decision-making. In a novel user study, we measured decision-making using three virtual versions of the Iowa Gambling Task (IGT). The versions differed with regard to the degree of immersion and design of the virtual environment. While emotions affect decision-making, we further measured the positive and negative affect of participants. A higher visual angle on a stimulus leads to an increased emotional response. Thus, we kept the visual angle on the Iowa Gambling Task the same between our conditions. Our results revealed no significant impact of immersion or the VE on the IGT. We further found no significant difference between the conditions with regard to positive and negative affect. This suggests that neither the medium used nor the design of the VE causes an impairment of decision-making. However, in combination with a recent study, we provide first evidence that a higher visual angle on the IGT leads to an effect of impairment. KW - virtual reality KW - virtual environments KW - immersion KW - decision-making KW - iowa gambling task Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-260101 VL - 2 ER - TY - JOUR A1 - Oberdörfer, Sebastian A1 - Birnstiel, Sandra A1 - Latoschik, Marc Erich A1 - Grafe, Silke T1 - Mutual Benefits: Interdisciplinary Education of Pre-Service Teachers and HCI Students in VR/AR Learning Environment Design JF - Frontiers in Education N2 - The successful development and classroom integration of Virtual (VR) and Augmented Reality (AR) learning environments requires competencies and content knowledge with respect to media didactics and the respective technologies. The paper discusses a pedagogical concept specifically aiming at the interdisciplinary education of pre-service teachers in collaboration with human-computer interaction students. The students’ overarching goal is the interdisciplinary realization and integration of VR/AR learning environments in teaching and learning concepts. To assist this approach, we developed a specific tutorial guiding the developmental process. We evaluate and validate the effectiveness of the overall pedagogical concept by analyzing the change in attitudes regarding 1) the use of VR/AR for educational purposes and in competencies and content knowledge regarding 2) media didactics and 3) technology. Our results indicate a significant improvement in the knowledge of media didactics and technology. We further report on four STEM learning environments that have been developed during the seminar. KW - interdisciplinary education KW - virtual reality KW - augmented reality KW - serious games KW - learning environments KW - teacher education Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-241612 SN - 2504-284X VL - 6 ER - TY - THES A1 - Nogatz, Falco T1 - Defining and Implementing Domain-Specific Languages with Prolog T1 - Definition und Implementierung domänenspezifischer Sprachen mit Prolog N2 - The landscape of today’s programming languages is manifold. With the diversity of applications, the difficulty of adequately addressing and specifying the used programs increases. This often leads to newly designed and implemented domain-specific languages. They enable domain experts to express knowledge in their preferred format, resulting in more readable and concise programs. Due to its flexible and declarative syntax without reserved keywords, the logic programming language Prolog is particularly suitable for defining and embedding domain-specific languages. This thesis addresses the questions and challenges that arise when integrating domain-specific languages into Prolog. We compare the two approaches to define them either externally or internally, and provide assisting tools for each. The grammar of a formal language is usually defined in the extended Backus–Naur form. In this work, we handle this formalism as a domain-specific language in Prolog, and define term expansions that allow to translate it into equivalent definite clause grammars. We present the package library(dcg4pt) for SWI-Prolog, which enriches them by an additional argument to automatically process the term’s corresponding parse tree. To simplify the work with definite clause grammars, we visualise their application by a web-based tracer. The external integration of domain-specific languages requires the programmer to keep the grammar, parser, and interpreter in sync. In many cases, domain-specific languages can instead be directly embedded into Prolog by providing appropriate operator definitions. In addition, we propose syntactic extensions for Prolog to expand its expressiveness, for instance to state logic formulas with their connectives verbatim. This allows to use all tools that were originally written for Prolog, for instance code linters and editors with syntax highlighting. We present the package library(plammar), a standard-compliant parser for Prolog source code, written in Prolog. It is able to automatically infer from example sentences the required operator definitions with their classes and precedences as well as the required Prolog language extensions. As a result, we can automatically answer the question: Is it possible to model these example sentences as valid Prolog clauses, and how? We discuss and apply the two approaches to internal and external integrations for several domain-specific languages, namely the extended Backus–Naur form, GraphQL, XPath, and a controlled natural language to represent expert rules in if-then form. The created toolchain with library(dcg4pt) and library(plammar) yields new application opportunities for static Prolog source code analysis, which we also present. N2 - Die Landschaft der heutigen Programmiersprachen ist vielfältig. Mit ihren unterschiedlichen Anwendungsbereichen steigt zugleich die Schwierigkeit, die eingesetzten Programme adäquat anzusprechen und zu spezifizieren. Immer häufiger werden hierfür domänenspezifische Sprachen entworfen und implementiert. Sie ermöglichen Domänenexperten, Wissen in ihrem bevorzugten Format auszudrücken, was zu lesbareren Programmen führt. Durch ihre flexible und deklarative Syntax ohne vorbelegte Schlüsselwörter ist die logische Programmsprache Prolog besonders geeignet, um domänenspezifische Sprachen zu definieren und einzubetten. Diese Arbeit befasst sich mit den Fragen und Herausforderungen, die sich bei der Integration von domänenspezifischen Sprachen in Prolog ergeben. Wir vergleichen die zwei Ansätze, sie entweder extern oder intern zu definieren, und stellen jeweils Hilfsmittel zur Verfügung. Die Grammatik einer formalen Sprache wird häufig in der erweiterten Backus–Naur–Form definiert. Diesen Formalismus behandeln wir in dieser Arbeit als eine domänenspezifische Sprache in Prolog und definieren Termexpansionen, die es erlauben, ihn in äquivalente Definite Clause Grammars für Prolog zu übersetzen. Durch das Modul library(dcg4pt) werden sie um ein zusätzliches Argument erweitert, das den Syntaxbaum eines Terms automatisch erzeugt. Um die Arbeit mit Definite Clause Grammars zu erleichtern, visualisieren wir ihre Anwendung in einem webbasierten Tracer. Meist können domänenspezifische Sprachen jedoch auch mittels passender Operatordefinitionen direkt in Prolog eingebettet werden. Dies ermöglicht die Verwendung aller Werkzeuge, die ursprünglich für Prolog geschrieben wurden, z.B. zum Code-Linting und Syntax-Highlighting. In dieser Arbeit stellen wir den standardkonformen Prolog-Parser library(plammar) vor. Er ist in Prolog geschrieben und in der Lage, aus Beispielsätzen automatisch die erforderlichen Operatoren mit ihren Klassen und Präzedenzen abzuleiten. Um die Ausdruckskraft von Prolog noch zu erweitern, schlagen wir Ergänzungen zum ISO Standard vor. Sie erlauben es, weitere Sprachen direkt einzubinden, und werden ebenfalls von library(plammar) identifiziert. So ist es bspw. möglich, logische Formeln direkt mit den bekannten Symbolen für Konjunktion, Disjunktion, usw. als Prolog-Programme anzugeben. Beide Ansätze der internen und externen Integration werden für mehrere domänen-spezifische Sprachen diskutiert und beispielhaft für GraphQL, XPath, die erweiterte Backus–Naur–Form sowie Expertenregeln in Wenn–Dann–Form umgesetzt. Die vorgestellten Werkzeuge um library(dcg4pt) und library(plammar) ergeben zudem neue Anwendungsmöglichkeiten auch für die statische Quellcodeanalyse von Prolog-Programmen. KW - PROLOG KW - Domänenspezifische Sprache KW - logic programming KW - knowledge representation KW - definite clause grammars Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-301872 ER - TY - THES A1 - Niebler, Thomas T1 - Extracting and Learning Semantics from Social Web Data T1 - Extraktion und Lernen von Semantik aus Social Web-Daten N2 - Making machines understand natural language is a dream of mankind that existed since a very long time. Early attempts at programming machines to converse with humans in a supposedly intelligent way with humans relied on phrase lists and simple keyword matching. However, such approaches cannot provide semantically adequate answers, as they do not consider the specific meaning of the conversation. Thus, if we want to enable machines to actually understand language, we need to be able to access semantically relevant background knowledge. For this, it is possible to query so-called ontologies, which are large networks containing knowledge about real-world entities and their semantic relations. However, creating such ontologies is a tedious task, as often extensive expert knowledge is required. Thus, we need to find ways to automatically construct and update ontologies that fit human intuition of semantics and semantic relations. More specifically, we need to determine semantic entities and find relations between them. While this is usually done on large corpora of unstructured text, previous work has shown that we can at least facilitate the first issue of extracting entities by considering special data such as tagging data or human navigational paths. Here, we do not need to detect the actual semantic entities, as they are already provided because of the way those data are collected. Thus we can mainly focus on the problem of assessing the degree of semantic relatedness between tags or web pages. However, there exist several issues which need to be overcome, if we want to approximate human intuition of semantic relatedness. For this, it is necessary to represent words and concepts in a way that allows easy and highly precise semantic characterization. This also largely depends on the quality of data from which these representations are constructed. In this thesis, we extract semantic information from both tagging data created by users of social tagging systems and human navigation data in different semantic-driven social web systems. Our main goal is to construct high quality and robust vector representations of words which can the be used to measure the relatedness of semantic concepts. First, we show that navigation in the social media systems Wikipedia and BibSonomy is driven by a semantic component. After this, we discuss and extend methods to model the semantic information in tagging data as low-dimensional vectors. Furthermore, we show that tagging pragmatics influences different facets of tagging semantics. We then investigate the usefulness of human navigational paths in several different settings on Wikipedia and BibSonomy for measuring semantic relatedness. Finally, we propose a metric-learning based algorithm in adapt pre-trained word embeddings to datasets containing human judgment of semantic relatedness. This work contributes to the field of studying semantic relatedness between words by proposing methods to extract semantic relatedness from web navigation, learn highquality and low-dimensional word representations from tagging data, and to learn semantic relatedness from any kind of vector representation by exploiting human feedback. Applications first and foremest lie in ontology learning for the Semantic Web, but also semantic search or query expansion. N2 - Einer der großen Träume der Menschheit ist es, Maschinen dazu zu bringen, natürliche Sprache zu verstehen. Frühe Versuche, Computer dahingehend zu programmieren, dass sie mit Menschen vermeintlich intelligente Konversationen führen können, basierten hauptsächlich auf Phrasensammlungen und einfachen Stichwortabgleichen. Solche Ansätze sind allerdings nicht in der Lage, inhaltlich adäquate Antworten zu liefern, da der tatsächliche Inhalt der Konversation nicht erfasst werden kann. Folgerichtig ist es notwendig, dass Maschinen auf semantisch relevantes Hintergrundwissen zugreifen können, um diesen Inhalt zu verstehen. Solches Wissen ist beispielsweise in Ontologien vorhanden. Ontologien sind große Datenbanken von vernetztem Wissen über Objekte und Gegenstände der echten Welt sowie über deren semantische Beziehungen. Das Erstellen solcher Ontologien ist eine sehr kostspielige und aufwändige Aufgabe, da oft tiefgreifendes Expertenwissen benötigt wird. Wir müssen also Wege finden, um Ontologien automatisch zu erstellen und aktuell zu halten, und zwar in einer Art und Weise, dass dies auch menschlichem Empfinden von Semantik und semantischer Ähnlichkeit entspricht. Genauer gesagt ist es notwendig, semantische Entitäten und deren Beziehungen zu bestimmen. Während solches Wissen üblicherweise aus Textkorpora extrahiert wird, ist es möglich, zumindest das erste Problem - semantische Entitäten zu bestimmen - durch Benutzung spezieller Datensätze zu umgehen, wie zum Beispiel Tagging- oder Navigationsdaten. In diesen Arten von Datensätzen ist es nicht notwendig, Entitäten zu extrahieren, da sie bereits aufgrund inhärenter Eigenschaften bei der Datenakquise vorhanden sind. Wir können uns also hauptsächlich auf die Bestimmung von semantischen Relationen und deren Intensität fokussieren. Trotzdem müssen hier noch einige Hindernisse überwunden werden. Beispielsweise ist es notwendig, Repräsentationen für semantische Entitäten zu finden, so dass es möglich ist, sie einfach und semantisch hochpräzise zu charakterisieren. Dies hängt allerdings auch erheblich von der Qualität der Daten ab, aus denen diese Repräsentationen konstruiert werden. In der vorliegenden Arbeit extrahieren wir semantische Informationen sowohl aus Taggingdaten, von Benutzern sozialer Taggingsysteme erzeugt, als auch aus Navigationsdaten von Benutzern semantikgetriebener Social Media-Systeme. Das Hauptziel dieser Arbeit ist es, hochqualitative und robuste Vektordarstellungen von Worten zu konstruieren, die dann dazu benutzt werden können, die semantische Ähnlichkeit von Konzepten zu bestimmen. Als erstes zeigen wir, dass Navigation in Social Media Systemen unter anderem durch eine semantische Komponente getrieben wird. Danach diskutieren und erweitern wir Methoden, um die semantische Information in Taggingdaten als niedrigdimensionale sogenannte “Embeddings” darzustellen. Darüberhinaus demonstrieren wir, dass die Taggingpragmatik verschiedene Facetten der Taggingsemantik beeinflusst. Anschließend untersuchen wir, inwieweit wir menschliche Navigationspfade zur Bestimmung semantischer Ähnlichkeit benutzen können. Hierzu betrachten wir mehrere Datensätze, die Navigationsdaten in verschiedenen Rahmenbedingungen beinhalten. Als letztes stellen wir einen neuartigen Algorithmus vor, um bereits trainierte Word Embeddings im Nachhinein an menschliche Intuition von Semantik anzupassen. Diese Arbeit steuert wertvolle Beiträge zum Gebiet der Bestimmung von semantischer Ähnlichkeit bei: Es werden Methoden vorgestellt werden, um hochqualitative semantische Information aus Web-Navigation und Taggingdaten zu extrahieren, diese mittels niedrigdimensionaler Vektordarstellungen zu modellieren und selbige schließlich besser an menschliches Empfinden von semantischer Ähnlichkeit anzupassen, indem aus genau diesem Empfinden gelernt wird. Anwendungen liegen in erster Linie darin, Ontologien für das Semantic Web zu lernen, allerdings auch in allen Bereichen, die Vektordarstellungen von semantischen Entitäten benutzen. KW - Semantik KW - Maschinelles Lernen KW - Soziale Software KW - Semantics KW - User Behavior KW - Social Web KW - Machine Learning Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-178666 ER - TY - RPRT A1 - Nguyen, Kien A1 - Loh, Frank A1 - Hoßfeld, Tobias T1 - Challenges of Serverless Deployment in Edge-MEC-Cloud T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - The emerging serverless computing may meet Edge Cloud in a beneficial manner as the two offer flexibility and dynamicity in optimizing finite hardware resources. However, the lack of proper study of a joint platform leaves a gap in literature about consumption and performance of such integration. To this end, this paper identifies the key questions and proposes a methodology to answer them. KW - Edge-MEC-Cloud Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322025 ER - TY - RPRT A1 - Navade, Piyush A1 - Maile, Lisa A1 - German, Reinhard T1 - Multiple DCLC Routing Algorithms for Ultra-Reliable and Time-Sensitive Applications T2 - KuVS Fachgespräch - Würzburg Workshop on Modeling, Analysis and Simulation of Next-Generation Communication Networks 2023 (WueWoWAS’23) N2 - This paper discusses the problem of finding multiple shortest disjoint paths in modern communication networks, which is essential for ultra-reliable and time-sensitive applications. Dijkstra’s algorithm has been a popular solution for the shortest path problem, but repetitive use of it to find multiple paths is not scalable. The Multiple Disjoint Path Algorithm (MDPAlg), published in 2021, proposes the use of a single full graph to construct multiple disjoint paths. This paper proposes modifications to the algorithm to include a delay constraint, which is important in time-sensitive applications. Different delay constraint least-cost routing algorithms are compared in a comprehensive manner to evaluate the benefits of the adapted MDPAlg algorithm. Fault tolerance, and thereby reliability, is ensured by generating multiple link-disjoint paths from source to destination. KW - Dijkstra’s algorithm KW - shortest path routing KW - disjoint multi-paths KW - delay constrained KW - least cost Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-322177 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - A Rule-based Statistical Classifier for Determining a Base Text and Ranking Witnesses In Textual Documents Collation Process N2 - Given a collection of diverging documents about some lost original text, any person interested in the text would try reconstructing it from the diverging documents. Whether it is eclecticism, stemmatics, or copy-text, one is expected to explicitly or indirectly select one of the documents as a starting point or as a base text, which could be emended through comparison with remaining documents, so that a text that could be designated as the original document is generated. Unfortunately the process of giving priority to one of the documents also known as witnesses is a subjective approach. In fact even Cladistics, which could be considered as a computer-based approach of implementing stemmatics, does not present or recommend users to select a certain witness as a starting point for the process of reconstructing the original document. In this study, a computational method using a rule-based Bayesian classifier is used, to assist text scholars in their attempts of reconstructing a non-existing document from some available witnesses. The method developed in this study consists of selecting a base text successively and collating it with remaining documents. Each completed collation cycle stores the selected base text and its closest witness, along with a weighted score of their similarities and differences. At the end of the collation process, a witness selected more often by majority of base texts is considered as the probable base text of the collection. Witnesses’ scores are weighted using a weighting system, based on effects of types of textual modifications on the process of reconstructing original documents. Users have the possibility to select between baseless and base text collation. If a base text is selected, the task is reduced to ranking the witnesses with respect to the base text, otherwise a base text as well as ranking of the witnesses with respect to the base text are computed and displayed on a histogram. KW - Textvergleich KW - Text Mining KW - Gothenburg Modell KW - Bayes-Klassifikator KW - Textual document collation KW - Base text KW - Gothenburg model KW - Bayesian classifier KW - Textual alterations weighting system Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-57465 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Assisting Understanding, Retention, and Dissemination of Religious Texts Knowledge with Modeling, and Visualization Techniques: The Case of The Quran N2 - Learning a book in general involves reading it, underlining important words, adding comments, summarizing some passages, and marking up some text or concepts. Once deeper understanding is achieved, one would like to organize and manage her/his knowledge in such a way that, it could be easily remembered and efficiently transmitted to others. In this paper, books organized in terms of chapters consisting of verses, are considered as the source of knowledge to be modeled. The knowledge model consists of verses with their metadata and semantic annotations. The metadata represent the multiple perspectives of knowledge modeling. Verses with their metadata and annotations form a meta-model, which will be published on a web Mashup. The meta-model with linking between its elements constitute a knowledge base. An XML-based annotation system breaking down the learning process into specific tasks, helps constructing the desired meta-model. The system is made up of user interfaces for creating metadata, annotating chapters’ contents according to user selected semantics, and templates for publishing the generated knowledge on the Internet. The proposed software system improves comprehension and retention of knowledge contained in religious texts through modeling and visualization. The system has been applied to the Quran, and the result obtained shows that multiple perspectives of information modeling can be successfully applied to religious texts. It is expected that this short ongoing study would motivate others to engage in devising and offering software systems for cross-religions learning. KW - Wissensmanagement KW - Koran KW - Knowledge Modeling KW - Meta-model KW - Knowledge Management KW - Content Management KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55927 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Design and Implementation of Architectures for Interactive Textual Documents Collation Systems N2 - One of the main purposes of textual documents collation is to identify a base text or closest witness to the base text, by analyzing and interpreting differences also known as types of changes that might exist between those documents. Based on this fact, it is reasonable to argue that, explicit identification of types of changes such as deletions, additions, transpositions, and mutations should be part of the collation process. The identification could be carried out by an interpretation module after alignment has taken place. Unfortunately existing collation software such as CollateX1 and Juxta2’s collation engine do not have interpretation modules. In fact they implement the Gothenburg model [1] for collation process which does not include an interpretation unit. Currently both CollateX and Juxta’s collation engine do not distinguish in their critical apparatus between the types of changes, and do not offer statistics about those changes. This paper presents a model for both integrated and distributed collation processes that improves the Gothenburg model. The model introduces an interpretation component for computing and distinguishing between the types of changes that documents could have undergone. Moreover two architectures implementing the model in order to solve the problem of interactive collation are discussed as well. Each architecture uses CollateX library, and provides on the one hand preprocessing functions for transforming input documents into CollateX input format, and on the other hand a post-processing module for enabling interactive collation. Finally simple algorithms for distinguishing between types of changes, and linking collated source documents with the collation results are also introduced. KW - Softwarearchitektur KW - Textvergleich KW - service based software architecture KW - service brokerage KW - interactive collation of textual variants KW - Gothenburg model of collation process Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-56601 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Assisting Analysis and Understanding of Quran Search Results with Interactive Scatter Plots and Tables N2 - The Quran is the holy book of Islam consisting of 6236 verses divided into 114 chapters called suras. Many verses are similar and even identical. Searching for similar texts (e.g verses) could return thousands of verses, that when displayed completely or partly as textual list would make analysis and understanding difficult and confusing. Moreover it would be visually impossible to instantly figure out the overall distribution of the retrieved verses in the Quran. As consequence reading and analyzing the verses would be tedious and unintuitive. In this study a combination of interactive scatter plots and tables has been developed to assist analysis and understanding of the search result. Retrieved verses are clustered by chapters, and a weight is assigned to each cluster according to number of verses it contains, so that users could visually identify most relevant areas, and figure out the places of revelation of the verses. Users visualize the complete result and can select a region of the plot to zoom in, click on a marker to display a table containing verses with English translation side by side. KW - Text Mining KW - Visualisierung KW - Koran KW - Information Visualization KW - Visual Text Mining KW - Scatter Plot KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-55840 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - A Knowledge-based Hybrid Statistical Classifier for Reconstructing the Chronology of the Quran N2 - Computationally categorizing Quran’s chapters has been mainly confined to the determination of chapters’ revelation places. However this broad classification is not sufficient to effectively and thoroughly understand and interpret the Quran. The chronology of revelation would not only improve comprehending the philosophy of Islam, but also the easiness of implementing and memorizing its laws and recommendations. This paper attempts estimating possible chapters’ dates of revelation through their lexical frequency profiles. A hybrid statistical classifier consisting of stemming and clustering algorithms for comparing lexical frequency profiles of chapters, and deriving dates of revelation has been developed. The classifier is trained using some chapters with known dates of revelation. Then it classifies chapters with uncertain dates of revelation by computing their proximity to the training ones. The results reported here indicate that the proposed methodology yields usable results in estimating dates of revelation of the Quran’s chapters based on their lexical contents. KW - Text Mining KW - Maschinelles Lernen KW - text categorization KW - Bayesian classifier KW - distance-based classifier KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-54712 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Markup overlap: Improving Fragmentation Method N2 - Overlapping is a common word used to describe documents whose structural dimensions cannot be adequately represented using tree structure. For instance a quotation that starts in one verse and ends in another verse. The problem of overlapping hierarchies is a recurring one, which has been addressed by a variety of approaches. There are XML based solutions as well as Non-XML ones. The XML-based solutions are: multiple documents, empty elements, fragmentation, out-of-line markup, JITT and BUVH. And the Non-XML approaches comprise CONCUR/XCONCUR, MECS, LMNL ...etc. This paper presents shortly state-of-the-art in overlapping hierarchies, and introduces two variations on the TEI fragmentation markup that have several advantages. KW - XML KW - Überlappung KW - Fragmentierung KW - XML KW - Overlapping KW - Fragmentation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-49084 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Understanding the Vex Rendering Engine N2 - The Visual Editor for XML (Vex)[1] used by TextGrid [2]and other applications has got rendering and layout engines. The layout engine is well documented but the rendering engine is not. This lack of documenting the rendering engine has made refactoring and extending the editor hard and tedious. For instance many CSS2.1 and upcoming CSS3 properties have not been implemented. Software developers in different projects such as TextGrid using Vex would like to update its CSS rendering engine in order to provide advanced user interfaces as well as support different document types. In order to minimize the effort of extending Vex functionality, I found it beneficial to write a basic documentation about Vex software architecture in general and its CSS rendering engine in particular. The documentation is mainly based on the idea of architectural layered diagrams. In fact layered diagrams can help developers understand software’s source code faster and easier in order to alter it, and fix errors. This paper is written for the purpose of providing direct support for exploration in the comprehension process of Vex source code. It discusses Vex software architecture. The organization of packages that make up the software, the architecture of its CSS rendering engine, an algorithm explaining the working principle of its rendering engine are described. KW - Cascading Style Sheets KW - Softwarearchitektur KW - CSS KW - Processing model KW - Software architecture KW - Software design Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51333 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Reference Architecture, Design of Cascading Style Sheets Processing Model N2 - The technique of using Cascading Style Sheets (CSS) to format and present structured data is called CSS processing model. For instance a CSS processing model for XML documents describes steps involved in formatting and presenting XML documents on screens or papers. Many software applications such as browsers and XML editors have their own CSS processing models which are part of their rendering engines. For instance each browser based on its CSS processing model renders CSS layout differently, as a result an inconsistency in the support of CSS features arises. Some browsers support more CSS features than others, and the rendering itself varies. Moreover the W3C standards are not even adhered by some browsers such as Internet Explorer. Test suites and other hacks and filters cannot definitely solve these problems, because these solutions are temporary and fragile. To palliate this inconsistency and browser compatibility issues with respect to CSS, a reference CSS processing model is needed. By extension it could even allow interoperability across CSS rendering engines. A reference architecture would provide common software architecture and interfaces, and facilitate refactoring, reuse, and automated unit testing. In [2] a reference architecture for browsers has been proposed. However this reference architecture is a macro reference model which does not consider separately individual components of rendering and layout engines. In this paper an attempt to develop a reference architecture for CSS processing models is discussed. In addition the Vex editor [3] rendering and layout engines, as well as an extended version of the editor used in TextGrid project [5] are also presented in order to validate the proposed reference architecture. KW - Cascading Style Sheets KW - XML KW - Softwarearchitektur KW - CSS KW - XML KW - Processing Model KW - Reference Architecture Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-51328 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Empirical Study on Screen Scraping Web Service Creation: Case of Rhein-Main-Verkehrsverbund (RMV) N2 - Internet is the biggest database that science and technology have ever produced. The world wide web is a large repository of information that cannot be used for automation by many applications due to its limited target audience. One of the solutions to the automation problem is to develop wrappers. Wrapping is a process whereby unstructured extracted information is transformed into a more structured one such as XML, which could be provided as webservice to other applications. A web service is a web page whose content is well structured so that a computer program can consume it automatically. This paper describes steps involved in constructing wrappers manually in order to automatically generate web services. KW - HTML KW - XML KW - Wrapper KW - Web service KW - HTML KW - XML KW - Wrapper KW - Web service Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-49396 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Java Web Frameworks Which One to Choose? N2 - This article discusses web frameworks that are available to a software developer in Java language. It introduces MVC paradigm and some frameworks that implement it. The article presents an overview of Struts, Spring MVC, JSF Frameworks, as well as guidelines for selecting one of them as development environment. KW - Java Frameworks KW - MVC KW - Struts KW - Spring KW - JSF Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-49407 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Doing Webservices Composition by Content-based Mashup: Example of a Web-based Simulator for Itinerary Planning N2 - Webservices composition is traditionally carried out using composition technologies such as Business Process Execution Language (BPEL) [1] and Web Service Choreography Interface (WSCI) [2]. The composition technology involves the process of web service discovery, invocation, and composition. However these technologies are not easy and flexible enough because they are mainly developer-centric. Moreover majority of websites have not yet embarked into the world of web service, although they have very important and useful information to offer. Is it because they have not understood the usefulness of web services or is it because of the costs? Whatever might be the answers to these questions, time and money are definitely required in order to create and offer web services. To avoid these expenditures, wrappers [7] to automatically generate webservices from websites would be a cheaper and easier solution. Mashups offer a different way of doing webservices composition. In web environment a Mashup is a web application that brings together data from several sources using webservices, APIs, wrappers and so on, in order to create entirely a new application that was not provided before. This paper presents first an overview of Mashups and the process of web service invocation and composition based on Mashup, then describes an example of a web-based simulator for navigation system in Germany. KW - Mashup KW - Wrapper KW - Mashup KW - Webservice Composition KW - Wrappers Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-50036 ER - TY - INPR A1 - Nassourou, Mohamadou T1 - Using Machine Learning Algorithms for Categorizing Quranic Chaptersby Major Phases of Prophet Mohammad’s Messengership N2 - This paper discusses the categorization of Quranic chapters by major phases of Prophet Mohammad’s messengership using machine learning algorithms. First, the chapters were categorized by places of revelation using Support Vector Machine and naïve Bayesian classifiers separately, and their results were compared to each other, as well as to the existing traditional Islamic and western orientalists classifications. The chapters were categorized into Meccan (revealed in Mecca) and Medinan (revealed in Medina). After that, chapters of each category were clustered using a kind of fuzzy-single linkage clustering approach, in order to correspond to the major phases of Prophet Mohammad’s life. The major phases of the Prophet’s life were manually derived from the Quranic text, as well as from the secondary Islamic literature e.g hadiths, exegesis. Previous studies on computing the places of revelation of Quranic chapters relied heavily on features extracted from existing background knowledge of the chapters. For instance, it is known that Meccan chapters contain mostly verses about faith and related problems, while Medinan ones encompass verses dealing with social issues, battles…etc. These features are by themselves insufficient as a basis for assigning the chapters to their respective places of revelation. In fact, there are exceptions, since some chapters do contain both Meccan and Medinan features. In this study, features of each category were automatically created from very few chapters, whose places of revelation have been determined through identification of historical facts and events such as battles, migration to Medina…etc. Chapters having unanimously agreed places of revelation were used as the initial training set, while the remaining chapters formed the testing set. The classification process was made recursive by regularly augmenting the training set with correctly classified chapters, in order to classify the whole testing set. Each chapter was preprocessed by removing unimportant words, stemming, and representation with vector space model. The result of this study shows that, the two classifiers have produced useable results, with an outperformance of the support vector machine classifier. This study indicates that, the proposed methodology yields encouraging results for arranging Quranic chapters by phases of Prophet Mohammad’s messengership. KW - Koran KW - Maschinelles Lernen KW - Text categorization KW - Clustering KW - Support Vector Machine KW - Naïve Bayesian KW - Place of revelation KW - Stages of Prophet Mohammad’s messengership KW - Quran Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:20-opus-66862 ER -